arch/arm/boot/dts/vexpress-v2m-rs1.dtsi

   1 /*
   2  * ARM Ltd. Versatile Express
   3  *
   4  * Motherboard Express uATX
   5  * V2M-P1
   6  *
   7  * HBI-0190D
   8  *
   9  * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
  10  * Technical Reference Manual)
  11  *
  12  * WARNING! The hardware described in this file is independent from the
  13  * original variant (vexpress-v2m.dtsi), but there is a strong
  14  * correspondence between the two configurations.
  15  *
  16  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
  17  * CHANGES TO vexpress-v2m.dtsi!
  18  */
  19
  20         motherboard {
  21                 model = "V2M-P1";
  22                 arm,hbi = <0x190>;
  23                 arm,vexpress,site = <0>;
  24                 arm,v2m-memory-map = "rs1";
  25                 compatible = "arm,vexpress,v2m-p1", "simple-bus";
  26                 #address-cells = <2>; /* SMB chipselect number and offset */
  27                 #size-cells = <1>;
  28                 #interrupt-cells = <1>;
  29                 ranges;
  30
  31                 flash@0,00000000 {
  32                         compatible = "arm,vexpress-flash", "cfi-flash";
  33                         reg = <0 0x00000000 0x04000000>,
  34                               <4 0x00000000 0x04000000>;
  35                         bank-width = <4>;
  36                 };
  37
  38                 psram@1,00000000 {
  39                         compatible = "arm,vexpress-psram", "mtd-ram";
  40                         reg = <1 0x00000000 0x02000000>;
  41                         bank-width = <4>;
  42                 };
  43
  44                 vram@2,00000000 {
  45                         compatible = "arm,vexpress-vram";
  46                         reg = <2 0x00000000 0x00800000>;
  47                 };
  48
  49                 ethernet@2,02000000 {
  50                         compatible = "smsc,lan9118", "smsc,lan9115";
  51                         reg = <2 0x02000000 0x10000>;
  52                         interrupts = <15>;
  53                         phy-mode = "mii";
  54                         reg-io-width = <4>;
  55                         smsc,irq-active-high;
  56                         smsc,irq-push-pull;
  57                         vdd33a-supply = <&v2m_fixed_3v3>;
  58                         vddvario-supply = <&v2m_fixed_3v3>;
  59                 };
  60
  61                 usb@2,03000000 {
  62                         compatible = "nxp,usb-isp1761";
  63                         reg = <2 0x03000000 0x20000>;
  64                         interrupts = <16>;
  65                         port1-otg;
  66                 };
  67
  68                 iofpga@3,00000000 {
  69                         compatible = "arm,amba-bus", "simple-bus";
  70                         #address-cells = <1>;
  71                         #size-cells = <1>;
  72                         ranges = <0 3 0 0x200000>;
  73
  74                         v2m_sysreg: sysreg@010000 {
  75                                 compatible = "arm,vexpress-sysreg";
  76                                 reg = <0x010000 0x1000>;
  77                                 gpio-controller;
  78                                 #gpio-cells = <2>;
  79                         };
  80
  81                         v2m_sysctl: sysctl@020000 {
  82                                 compatible = "arm,sp810", "arm,primecell";
  83                                 reg = <0x020000 0x1000>;
  84                                 clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
  85                                 clock-names = "refclk", "timclk", "apb_pclk";
  86                                 #clock-cells = <1>;
  87                                 clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
  88                         };
  89
  90                         /* PCI-E I2C bus */
  91                         v2m_i2c_pcie: i2c@030000 {
  92                                 compatible = "arm,versatile-i2c";
  93                                 reg = <0x030000 0x1000>;
  94
  95                                 #address-cells = <1>;
  96                                 #size-cells = <0>;
  97
  98                                 pcie-switch@60 {
  99                                         compatible = "idt,89hpes32h8";
 100                                         reg = <0x60>;
 101                                 };
 102                         };
 103
 104                         aaci@040000 {
 105                                 compatible = "arm,pl041", "arm,primecell";
 106                                 reg = <0x040000 0x1000>;
 107                                 interrupts = <11>;
 108                                 clocks = <&smbclk>;
 109                                 clock-names = "apb_pclk";
 110                         };
 111
 112                         mmci@050000 {
 113                                 compatible = "arm,pl180", "arm,primecell";
 114                                 reg = <0x050000 0x1000>;
 115                                 interrupts = <9 10>;
 116                                 cd-gpios = <&v2m_sysreg 0 0>;
 117                                 wp-gpios = <&v2m_sysreg 1 0>;
 118                                 max-frequency = <12000000>;
 119                                 vmmc-supply = <&v2m_fixed_3v3>;
 120                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 121                                 clock-names = "mclk", "apb_pclk";
 122                         };
 123
 124                         kmi@060000 {
 125                                 compatible = "arm,pl050", "arm,primecell";
 126                                 reg = <0x060000 0x1000>;
 127                                 interrupts = <12>;
 128                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 129                                 clock-names = "KMIREFCLK", "apb_pclk";
 130                         };
 131
 132                         kmi@070000 {
 133                                 compatible = "arm,pl050", "arm,primecell";
 134                                 reg = <0x070000 0x1000>;
 135                                 interrupts = <13>;
 136                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 137                                 clock-names = "KMIREFCLK", "apb_pclk";
 138                         };
 139
 140                         v2m_serial0: uart@090000 {
 141                                 compatible = "arm,pl011", "arm,primecell";
 142                                 reg = <0x090000 0x1000>;
 143                                 interrupts = <5>;
 144                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 145                                 clock-names = "uartclk", "apb_pclk";
 146                         };
 147
 148                         v2m_serial1: uart@0a0000 {
 149                                 compatible = "arm,pl011", "arm,primecell";
 150                                 reg = <0x0a0000 0x1000>;
 151                                 interrupts = <6>;
 152                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 153                                 clock-names = "uartclk", "apb_pclk";
 154                         };
 155
 156                         v2m_serial2: uart@0b0000 {
 157                                 compatible = "arm,pl011", "arm,primecell";
 158                                 reg = <0x0b0000 0x1000>;
 159                                 interrupts = <7>;
 160                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 161                                 clock-names = "uartclk", "apb_pclk";
 162                         };
 163
 164                         v2m_serial3: uart@0c0000 {
 165                                 compatible = "arm,pl011", "arm,primecell";
 166                                 reg = <0x0c0000 0x1000>;
 167                                 interrupts = <8>;
 168                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 169                                 clock-names = "uartclk", "apb_pclk";
 170                         };
 171
 172                         wdt@0f0000 {
 173                                 compatible = "arm,sp805", "arm,primecell";
 174                                 reg = <0x0f0000 0x1000>;
 175                                 interrupts = <0>;
 176                                 clocks = <&v2m_refclk32khz>, <&smbclk>;
 177                                 clock-names = "wdogclk", "apb_pclk";
 178                         };
 179
 180                         v2m_timer01: timer@110000 {
 181                                 compatible = "arm,sp804", "arm,primecell";
 182                                 reg = <0x110000 0x1000>;
 183                                 interrupts = <2>;
 184                                 clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
 185                                 clock-names = "timclken1", "timclken2", "apb_pclk";
 186                         };
 187
 188                         v2m_timer23: timer@120000 {
 189                                 compatible = "arm,sp804", "arm,primecell";
 190                                 reg = <0x120000 0x1000>;
 191                                 interrupts = <3>;
 192                                 clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
 193                                 clock-names = "timclken1", "timclken2", "apb_pclk";
 194                         };
 195
 196                         /* DVI I2C bus */
 197                         v2m_i2c_dvi: i2c@160000 {
 198                                 compatible = "arm,versatile-i2c";
 199                                 reg = <0x160000 0x1000>;
 200
 201                                 #address-cells = <1>;
 202                                 #size-cells = <0>;
 203
 204                                 dvi-transmitter@39 {
 205                                         compatible = "sil,sii9022-tpi", "sil,sii9022";
 206                                         reg = <0x39>;
 207                                 };
 208
 209                                 dvi-transmitter@60 {
 210                                         compatible = "sil,sii9022-cpi", "sil,sii9022";
 211                                         reg = <0x60>;
 212                                 };
 213                         };
 214
 215                         rtc@170000 {
 216                                 compatible = "arm,pl031", "arm,primecell";
 217                                 reg = <0x170000 0x1000>;
 218                                 interrupts = <4>;
 219                                 clocks = <&smbclk>;
 220                                 clock-names = "apb_pclk";
 221                         };
 222
 223                         compact-flash@1a0000 {
 224                                 compatible = "arm,vexpress-cf", "ata-generic";
 225                                 reg = <0x1a0000 0x100
 226                                        0x1a0100 0xf00>;
 227                                 reg-shift = <2>;
 228                         };
 229
 230                         clcd@1f0000 {
 231                                 compatible = "arm,pl111", "arm,primecell";
 232                                 reg = <0x1f0000 0x1000>;
 233                                 interrupts = <14>;
 234                                 clocks = <&v2m_oscclk1>, <&smbclk>;
 235                                 clock-names = "clcdclk", "apb_pclk";
 236                         };
 237                 };
 238
 239                 v2m_fixed_3v3: fixedregulator@0 {
 240                         compatible = "regulator-fixed";
 241                         regulator-name = "3V3";
 242                         regulator-min-microvolt = <3300000>;
 243                         regulator-max-microvolt = <3300000>;
 244                         regulator-always-on;
 245                 };
 246
 247                 v2m_clk24mhz: clk24mhz {
 248                         compatible = "fixed-clock";
 249                         #clock-cells = <0>;
 250                         clock-frequency = <24000000>;
 251                         clock-output-names = "v2m:clk24mhz";
 252                 };
 253
 254                 v2m_refclk1mhz: refclk1mhz {
 255                         compatible = "fixed-clock";
 256                         #clock-cells = <0>;
 257                         clock-frequency = <1000000>;
 258                         clock-output-names = "v2m:refclk1mhz";
 259                 };
 260
 261                 v2m_refclk32khz: refclk32khz {
 262                         compatible = "fixed-clock";
 263                         #clock-cells = <0>;
 264                         clock-frequency = <32768>;
 265                         clock-output-names = "v2m:refclk32khz";
 266                 };
 267
 268                 mcc {
 269                         compatible = "arm,vexpress,config-bus";
 270                         arm,vexpress,config-bridge = <&v2m_sysreg>;
 271
 272                         osc@0 {
 273                                 /* MCC static memory clock */
 274                                 compatible = "arm,vexpress-osc";
 275                                 arm,vexpress-sysreg,func = <1 0>;
 276                                 freq-range = <25000000 60000000>;
 277                                 #clock-cells = <0>;
 278                                 clock-output-names = "v2m:oscclk0";
 279                         };
 280
 281                         v2m_oscclk1: osc@1 {
 282                                 /* CLCD clock */
 283                                 compatible = "arm,vexpress-osc";
 284                                 arm,vexpress-sysreg,func = <1 1>;
 285                                 freq-range = <23750000 63500000>;
 286                                 #clock-cells = <0>;
 287                                 clock-output-names = "v2m:oscclk1";
 288                         };
 289
 290                         v2m_oscclk2: osc@2 {
 291                                 /* IO FPGA peripheral clock */
 292                                 compatible = "arm,vexpress-osc";
 293                                 arm,vexpress-sysreg,func = <1 2>;
 294                                 freq-range = <24000000 24000000>;
 295                                 #clock-cells = <0>;
 296                                 clock-output-names = "v2m:oscclk2";
 297                         };
 298
 299                         volt@0 {
 300                                 /* Logic level voltage */
 301                                 compatible = "arm,vexpress-volt";
 302                                 arm,vexpress-sysreg,func = <2 0>;
 303                                 regulator-name = "VIO";
 304                                 regulator-always-on;
 305                                 label = "VIO";
 306                         };
 307
 308                         temp@0 {
 309                                 /* MCC internal operating temperature */
 310                                 compatible = "arm,vexpress-temp";
 311                                 arm,vexpress-sysreg,func = <4 0>;
 312                                 label = "MCC";
 313                         };
 314
 315                         reset@0 {
 316                                 compatible = "arm,vexpress-reset";
 317                                 arm,vexpress-sysreg,func = <5 0>;
 318                         };
 319
 320                         muxfpga@0 {
 321                                 compatible = "arm,vexpress-muxfpga";
 322                                 arm,vexpress-sysreg,func = <7 0>;
 323                         };
 324
 325                         shutdown@0 {
 326                                 compatible = "arm,vexpress-shutdown";
 327                                 arm,vexpress-sysreg,func = <8 0>;
 328                         };
 329
 330                         reboot@0 {
 331                                 compatible = "arm,vexpress-reboot";
 332                                 arm,vexpress-sysreg,func = <9 0>;
 333                         };
 334
 335                         dvimode@0 {
 336                                 compatible = "arm,vexpress-dvimode";
 337                                 arm,vexpress-sysreg,func = <11 0>;
 338                         };
 339                 };
 340         };