]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/powerpc/platforms/85xx/mpc85xx_mds.c
8498f7323470c8447ef827440fe5355652f2c20d
[karo-tx-linux.git] / arch / powerpc / platforms / 85xx / mpc85xx_mds.c
1 /*
2  * Copyright (C) 2006-2010, 2012 Freescale Semicondutor, Inc.
3  * All rights reserved.
4  *
5  * Author: Andy Fleming <afleming@freescale.com>
6  *
7  * Based on 83xx/mpc8360e_pb.c by:
8  *         Li Yang <LeoLi@freescale.com>
9  *         Yin Olivia <Hong-hua.Yin@freescale.com>
10  *
11  * Description:
12  * MPC85xx MDS board specific routines.
13  *
14  * This program is free software; you can redistribute  it and/or modify it
15  * under  the terms of  the GNU General  Public License as published by the
16  * Free Software Foundation;  either version 2 of the  License, or (at your
17  * option) any later version.
18  */
19
20 #include <linux/stddef.h>
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/errno.h>
24 #include <linux/reboot.h>
25 #include <linux/pci.h>
26 #include <linux/kdev_t.h>
27 #include <linux/major.h>
28 #include <linux/console.h>
29 #include <linux/delay.h>
30 #include <linux/seq_file.h>
31 #include <linux/initrd.h>
32 #include <linux/fsl_devices.h>
33 #include <linux/of_platform.h>
34 #include <linux/of_device.h>
35 #include <linux/phy.h>
36 #include <linux/memblock.h>
37
38 #include <linux/atomic.h>
39 #include <asm/time.h>
40 #include <asm/io.h>
41 #include <asm/machdep.h>
42 #include <asm/pci-bridge.h>
43 #include <asm/irq.h>
44 #include <mm/mmu_decl.h>
45 #include <asm/prom.h>
46 #include <asm/udbg.h>
47 #include <sysdev/fsl_soc.h>
48 #include <sysdev/fsl_pci.h>
49 #include <sysdev/simple_gpio.h>
50 #include <asm/qe.h>
51 #include <asm/qe_ic.h>
52 #include <asm/mpic.h>
53 #include <asm/swiotlb.h>
54 #include <asm/fsl_guts.h>
55 #include "smp.h"
56
57 #include "mpc85xx.h"
58
59 #undef DEBUG
60 #ifdef DEBUG
61 #define DBG(fmt...) udbg_printf(fmt)
62 #else
63 #define DBG(fmt...)
64 #endif
65
66 #define MV88E1111_SCR   0x10
67 #define MV88E1111_SCR_125CLK    0x0010
68 static int mpc8568_fixup_125_clock(struct phy_device *phydev)
69 {
70         int scr;
71         int err;
72
73         /* Workaround for the 125 CLK Toggle */
74         scr = phy_read(phydev, MV88E1111_SCR);
75
76         if (scr < 0)
77                 return scr;
78
79         err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
80
81         if (err)
82                 return err;
83
84         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
85
86         if (err)
87                 return err;
88
89         scr = phy_read(phydev, MV88E1111_SCR);
90
91         if (scr < 0)
92                 return scr;
93
94         err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
95
96         return err;
97 }
98
99 static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
100 {
101         int temp;
102         int err;
103
104         /* Errata */
105         err = phy_write(phydev,29, 0x0006);
106
107         if (err)
108                 return err;
109
110         temp = phy_read(phydev, 30);
111
112         if (temp < 0)
113                 return temp;
114
115         temp = (temp & (~0x8000)) | 0x4000;
116         err = phy_write(phydev,30, temp);
117
118         if (err)
119                 return err;
120
121         err = phy_write(phydev,29, 0x000a);
122
123         if (err)
124                 return err;
125
126         temp = phy_read(phydev, 30);
127
128         if (temp < 0)
129                 return temp;
130
131         temp = phy_read(phydev, 30);
132
133         if (temp < 0)
134                 return temp;
135
136         temp &= ~0x0020;
137
138         err = phy_write(phydev,30,temp);
139
140         if (err)
141                 return err;
142
143         /* Disable automatic MDI/MDIX selection */
144         temp = phy_read(phydev, 16);
145
146         if (temp < 0)
147                 return temp;
148
149         temp &= ~0x0060;
150         err = phy_write(phydev,16,temp);
151
152         return err;
153 }
154
155 /* ************************************************************************
156  *
157  * Setup the architecture
158  *
159  */
160 #ifdef CONFIG_QUICC_ENGINE
161 static void __init mpc85xx_mds_reset_ucc_phys(void)
162 {
163         struct device_node *np;
164         static u8 __iomem *bcsr_regs;
165
166         /* Map BCSR area */
167         np = of_find_node_by_name(NULL, "bcsr");
168         if (!np)
169                 return;
170
171         bcsr_regs = of_iomap(np, 0);
172         of_node_put(np);
173         if (!bcsr_regs)
174                 return;
175
176         if (machine_is(mpc8568_mds)) {
177 #define BCSR_UCC1_GETH_EN       (0x1 << 7)
178 #define BCSR_UCC2_GETH_EN       (0x1 << 7)
179 #define BCSR_UCC1_MODE_MSK      (0x3 << 4)
180 #define BCSR_UCC2_MODE_MSK      (0x3 << 0)
181
182                 /* Turn off UCC1 & UCC2 */
183                 clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
184                 clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
185
186                 /* Mode is RGMII, all bits clear */
187                 clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
188                                          BCSR_UCC2_MODE_MSK);
189
190                 /* Turn UCC1 & UCC2 on */
191                 setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
192                 setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
193         } else if (machine_is(mpc8569_mds)) {
194 #define BCSR7_UCC12_GETHnRST    (0x1 << 2)
195 #define BCSR8_UEM_MARVELL_RST   (0x1 << 1)
196 #define BCSR_UCC_RGMII          (0x1 << 6)
197 #define BCSR_UCC_RTBI           (0x1 << 5)
198                 /*
199                  * U-Boot mangles interrupt polarity for Marvell PHYs,
200                  * so reset built-in and UEM Marvell PHYs, this puts
201                  * the PHYs into their normal state.
202                  */
203                 clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
204                 setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
205
206                 setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
207                 clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
208
209                 for (np = NULL; (np = of_find_compatible_node(np,
210                                                 "network",
211                                                 "ucc_geth")) != NULL;) {
212                         const unsigned int *prop;
213                         int ucc_num;
214
215                         prop = of_get_property(np, "cell-index", NULL);
216                         if (prop == NULL)
217                                 continue;
218
219                         ucc_num = *prop - 1;
220
221                         prop = of_get_property(np, "phy-connection-type", NULL);
222                         if (prop == NULL)
223                                 continue;
224
225                         if (strcmp("rtbi", (const char *)prop) == 0)
226                                 clrsetbits_8(&bcsr_regs[7 + ucc_num],
227                                         BCSR_UCC_RGMII, BCSR_UCC_RTBI);
228                 }
229         } else if (machine_is(p1021_mds)) {
230 #define BCSR11_ENET_MICRST     (0x1 << 5)
231                 /* Reset Micrel PHY */
232                 clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
233                 setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
234         }
235
236         iounmap(bcsr_regs);
237 }
238
239 static void __init mpc85xx_mds_qe_init(void)
240 {
241         struct device_node *np;
242
243         np = of_find_compatible_node(NULL, NULL, "fsl,qe");
244         if (!np) {
245                 np = of_find_node_by_name(NULL, "qe");
246                 if (!np)
247                         return;
248         }
249
250         if (!of_device_is_available(np)) {
251                 of_node_put(np);
252                 return;
253         }
254
255         qe_reset();
256         of_node_put(np);
257
258         np = of_find_node_by_name(NULL, "par_io");
259         if (np) {
260                 struct device_node *ucc;
261
262                 par_io_init(np);
263                 of_node_put(np);
264
265                 for_each_node_by_name(ucc, "ucc")
266                         par_io_of_config(ucc);
267         }
268
269         mpc85xx_mds_reset_ucc_phys();
270
271         if (machine_is(p1021_mds)) {
272
273                 struct ccsr_guts __iomem *guts;
274
275                 np = of_find_node_by_name(NULL, "global-utilities");
276                 if (np) {
277                         guts = of_iomap(np, 0);
278                         if (!guts)
279                                 pr_err("mpc85xx-rdb: could not map global utilities register\n");
280                         else{
281                         /* P1021 has pins muxed for QE and other functions. To
282                          * enable QE UEC mode, we need to set bit QE0 for UCC1
283                          * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
284                          * and QE12 for QE MII management signals in PMUXCR
285                          * register.
286                          */
287                                 setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
288                                                   MPC85xx_PMUXCR_QE(3) |
289                                                   MPC85xx_PMUXCR_QE(9) |
290                                                   MPC85xx_PMUXCR_QE(12));
291                                 iounmap(guts);
292                         }
293                         of_node_put(np);
294                 }
295
296         }
297 }
298
299 static void __init mpc85xx_mds_qeic_init(void)
300 {
301         struct device_node *np;
302
303         np = of_find_compatible_node(NULL, NULL, "fsl,qe");
304         if (!of_device_is_available(np)) {
305                 of_node_put(np);
306                 return;
307         }
308
309         np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
310         if (!np) {
311                 np = of_find_node_by_type(NULL, "qeic");
312                 if (!np)
313                         return;
314         }
315
316         if (machine_is(p1021_mds))
317                 qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
318                                 qe_ic_cascade_high_mpic);
319         else
320                 qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
321         of_node_put(np);
322 }
323 #else
324 static void __init mpc85xx_mds_qe_init(void) { }
325 static void __init mpc85xx_mds_qeic_init(void) { }
326 #endif  /* CONFIG_QUICC_ENGINE */
327
328 static void __init mpc85xx_mds_setup_arch(void)
329 {
330         if (ppc_md.progress)
331                 ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
332
333         mpc85xx_smp_init();
334
335         mpc85xx_mds_qe_init();
336
337         fsl_pci_assign_primary();
338
339         swiotlb_detect_4g();
340 }
341
342
343 static int __init board_fixups(void)
344 {
345         char phy_id[20];
346         char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
347         struct device_node *mdio;
348         struct resource res;
349         int i;
350
351         for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
352                 mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
353
354                 of_address_to_resource(mdio, 0, &res);
355                 snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
356                         (unsigned long long)res.start, 1);
357
358                 phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
359                 phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
360
361                 /* Register a workaround for errata */
362                 snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
363                         (unsigned long long)res.start, 7);
364                 phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
365
366                 of_node_put(mdio);
367         }
368
369         return 0;
370 }
371 machine_arch_initcall(mpc8568_mds, board_fixups);
372 machine_arch_initcall(mpc8569_mds, board_fixups);
373
374 static int __init mpc85xx_publish_devices(void)
375 {
376         if (machine_is(mpc8568_mds))
377                 simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
378         if (machine_is(mpc8569_mds))
379                 simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
380
381         return mpc85xx_common_publish_devices();
382 }
383
384 machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices);
385 machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices);
386 machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices);
387
388 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
389 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
390 machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
391
392 static void __init mpc85xx_mds_pic_init(void)
393 {
394         struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
395                         MPIC_SINGLE_DEST_CPU,
396                         0, 256, " OpenPIC  ");
397         BUG_ON(mpic == NULL);
398
399         mpic_init(mpic);
400         mpc85xx_mds_qeic_init();
401 }
402
403 static int __init mpc85xx_mds_probe(void)
404 {
405         unsigned long root = of_get_flat_dt_root();
406
407         return of_flat_dt_is_compatible(root, "MPC85xxMDS");
408 }
409
410 define_machine(mpc8568_mds) {
411         .name           = "MPC8568 MDS",
412         .probe          = mpc85xx_mds_probe,
413         .setup_arch     = mpc85xx_mds_setup_arch,
414         .init_IRQ       = mpc85xx_mds_pic_init,
415         .get_irq        = mpic_get_irq,
416         .restart        = fsl_rstcr_restart,
417         .calibrate_decr = generic_calibrate_decr,
418         .progress       = udbg_progress,
419 #ifdef CONFIG_PCI
420         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
421 #endif
422 };
423
424 static int __init mpc8569_mds_probe(void)
425 {
426         unsigned long root = of_get_flat_dt_root();
427
428         return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
429 }
430
431 define_machine(mpc8569_mds) {
432         .name           = "MPC8569 MDS",
433         .probe          = mpc8569_mds_probe,
434         .setup_arch     = mpc85xx_mds_setup_arch,
435         .init_IRQ       = mpc85xx_mds_pic_init,
436         .get_irq        = mpic_get_irq,
437         .restart        = fsl_rstcr_restart,
438         .calibrate_decr = generic_calibrate_decr,
439         .progress       = udbg_progress,
440 #ifdef CONFIG_PCI
441         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
442 #endif
443 };
444
445 static int __init p1021_mds_probe(void)
446 {
447         unsigned long root = of_get_flat_dt_root();
448
449         return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
450
451 }
452
453 define_machine(p1021_mds) {
454         .name           = "P1021 MDS",
455         .probe          = p1021_mds_probe,
456         .setup_arch     = mpc85xx_mds_setup_arch,
457         .init_IRQ       = mpc85xx_mds_pic_init,
458         .get_irq        = mpic_get_irq,
459         .restart        = fsl_rstcr_restart,
460         .calibrate_decr = generic_calibrate_decr,
461         .progress       = udbg_progress,
462 #ifdef CONFIG_PCI
463         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
464 #endif
465 };
466