]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/x86/kernel/cpu/intel.c
Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-block
[karo-tx-linux.git] / arch / x86 / kernel / cpu / intel.c
1 #include <linux/kernel.h>
2
3 #include <linux/string.h>
4 #include <linux/bitops.h>
5 #include <linux/smp.h>
6 #include <linux/sched.h>
7 #include <linux/thread_info.h>
8 #include <linux/module.h>
9 #include <linux/uaccess.h>
10
11 #include <asm/cpufeature.h>
12 #include <asm/pgtable.h>
13 #include <asm/msr.h>
14 #include <asm/bugs.h>
15 #include <asm/cpu.h>
16
17 #ifdef CONFIG_X86_64
18 #include <linux/topology.h>
19 #endif
20
21 #include "cpu.h"
22
23 #ifdef CONFIG_X86_LOCAL_APIC
24 #include <asm/mpspec.h>
25 #include <asm/apic.h>
26 #endif
27
28 /*
29  * Just in case our CPU detection goes bad, or you have a weird system,
30  * allow a way to override the automatic disabling of MPX.
31  */
32 static int forcempx;
33
34 static int __init forcempx_setup(char *__unused)
35 {
36         forcempx = 1;
37
38         return 1;
39 }
40 __setup("intel-skd-046-workaround=disable", forcempx_setup);
41
42 void check_mpx_erratum(struct cpuinfo_x86 *c)
43 {
44         if (forcempx)
45                 return;
46         /*
47          * Turn off the MPX feature on CPUs where SMEP is not
48          * available or disabled.
49          *
50          * Works around Intel Erratum SKD046: "Branch Instructions
51          * May Initialize MPX Bound Registers Incorrectly".
52          *
53          * This might falsely disable MPX on systems without
54          * SMEP, like Atom processors without SMEP.  But there
55          * is no such hardware known at the moment.
56          */
57         if (cpu_has(c, X86_FEATURE_MPX) && !cpu_has(c, X86_FEATURE_SMEP)) {
58                 setup_clear_cpu_cap(X86_FEATURE_MPX);
59                 pr_warn("x86/mpx: Disabling MPX since SMEP not present\n");
60         }
61 }
62
63 static void early_init_intel(struct cpuinfo_x86 *c)
64 {
65         u64 misc_enable;
66
67         /* Unmask CPUID levels if masked: */
68         if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
69                 if (msr_clear_bit(MSR_IA32_MISC_ENABLE,
70                                   MSR_IA32_MISC_ENABLE_LIMIT_CPUID_BIT) > 0) {
71                         c->cpuid_level = cpuid_eax(0);
72                         get_cpu_cap(c);
73                 }
74         }
75
76         if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
77                 (c->x86 == 0x6 && c->x86_model >= 0x0e))
78                 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
79
80         if (c->x86 >= 6 && !cpu_has(c, X86_FEATURE_IA64)) {
81                 unsigned lower_word;
82
83                 wrmsr(MSR_IA32_UCODE_REV, 0, 0);
84                 /* Required by the SDM */
85                 sync_core();
86                 rdmsr(MSR_IA32_UCODE_REV, lower_word, c->microcode);
87         }
88
89         /*
90          * Atom erratum AAE44/AAF40/AAG38/AAH41:
91          *
92          * A race condition between speculative fetches and invalidating
93          * a large page.  This is worked around in microcode, but we
94          * need the microcode to have already been loaded... so if it is
95          * not, recommend a BIOS update and disable large pages.
96          */
97         if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2 &&
98             c->microcode < 0x20e) {
99                 pr_warn("Atom PSE erratum detected, BIOS microcode update recommended\n");
100                 clear_cpu_cap(c, X86_FEATURE_PSE);
101         }
102
103 #ifdef CONFIG_X86_64
104         set_cpu_cap(c, X86_FEATURE_SYSENTER32);
105 #else
106         /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
107         if (c->x86 == 15 && c->x86_cache_alignment == 64)
108                 c->x86_cache_alignment = 128;
109 #endif
110
111         /* CPUID workaround for 0F33/0F34 CPU */
112         if (c->x86 == 0xF && c->x86_model == 0x3
113             && (c->x86_mask == 0x3 || c->x86_mask == 0x4))
114                 c->x86_phys_bits = 36;
115
116         /*
117          * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
118          * with P/T states and does not stop in deep C-states.
119          *
120          * It is also reliable across cores and sockets. (but not across
121          * cabinets - we turn it off in that case explicitly.)
122          */
123         if (c->x86_power & (1 << 8)) {
124                 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
125                 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
126                 if (!check_tsc_unstable())
127                         set_sched_clock_stable();
128         }
129
130         /* Penwell and Cloverview have the TSC which doesn't sleep on S3 */
131         if (c->x86 == 6) {
132                 switch (c->x86_model) {
133                 case 0x27:      /* Penwell */
134                 case 0x35:      /* Cloverview */
135                 case 0x4a:      /* Merrifield */
136                         set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC_S3);
137                         break;
138                 default:
139                         break;
140                 }
141         }
142
143         /*
144          * There is a known erratum on Pentium III and Core Solo
145          * and Core Duo CPUs.
146          * " Page with PAT set to WC while associated MTRR is UC
147          *   may consolidate to UC "
148          * Because of this erratum, it is better to stick with
149          * setting WC in MTRR rather than using PAT on these CPUs.
150          *
151          * Enable PAT WC only on P4, Core 2 or later CPUs.
152          */
153         if (c->x86 == 6 && c->x86_model < 15)
154                 clear_cpu_cap(c, X86_FEATURE_PAT);
155
156 #ifdef CONFIG_KMEMCHECK
157         /*
158          * P4s have a "fast strings" feature which causes single-
159          * stepping REP instructions to only generate a #DB on
160          * cache-line boundaries.
161          *
162          * Ingo Molnar reported a Pentium D (model 6) and a Xeon
163          * (model 2) with the same problem.
164          */
165         if (c->x86 == 15)
166                 if (msr_clear_bit(MSR_IA32_MISC_ENABLE,
167                                   MSR_IA32_MISC_ENABLE_FAST_STRING_BIT) > 0)
168                         pr_info("kmemcheck: Disabling fast string operations\n");
169 #endif
170
171         /*
172          * If fast string is not enabled in IA32_MISC_ENABLE for any reason,
173          * clear the fast string and enhanced fast string CPU capabilities.
174          */
175         if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
176                 rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
177                 if (!(misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING)) {
178                         pr_info("Disabled fast string operations\n");
179                         setup_clear_cpu_cap(X86_FEATURE_REP_GOOD);
180                         setup_clear_cpu_cap(X86_FEATURE_ERMS);
181                 }
182         }
183
184         /*
185          * Intel Quark Core DevMan_001.pdf section 6.4.11
186          * "The operating system also is required to invalidate (i.e., flush)
187          *  the TLB when any changes are made to any of the page table entries.
188          *  The operating system must reload CR3 to cause the TLB to be flushed"
189          *
190          * As a result, boot_cpu_has(X86_FEATURE_PGE) in arch/x86/include/asm/tlbflush.h
191          * should be false so that __flush_tlb_all() causes CR3 insted of CR4.PGE
192          * to be modified.
193          */
194         if (c->x86 == 5 && c->x86_model == 9) {
195                 pr_info("Disabling PGE capability bit\n");
196                 setup_clear_cpu_cap(X86_FEATURE_PGE);
197         }
198
199         if (c->cpuid_level >= 0x00000001) {
200                 u32 eax, ebx, ecx, edx;
201
202                 cpuid(0x00000001, &eax, &ebx, &ecx, &edx);
203                 /*
204                  * If HTT (EDX[28]) is set EBX[16:23] contain the number of
205                  * apicids which are reserved per package. Store the resulting
206                  * shift value for the package management code.
207                  */
208                 if (edx & (1U << 28))
209                         c->x86_coreid_bits = get_count_order((ebx >> 16) & 0xff);
210         }
211
212         check_mpx_erratum(c);
213 }
214
215 #ifdef CONFIG_X86_32
216 /*
217  *      Early probe support logic for ppro memory erratum #50
218  *
219  *      This is called before we do cpu ident work
220  */
221
222 int ppro_with_ram_bug(void)
223 {
224         /* Uses data from early_cpu_detect now */
225         if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
226             boot_cpu_data.x86 == 6 &&
227             boot_cpu_data.x86_model == 1 &&
228             boot_cpu_data.x86_mask < 8) {
229                 pr_info("Pentium Pro with Errata#50 detected. Taking evasive action.\n");
230                 return 1;
231         }
232         return 0;
233 }
234
235 static void intel_smp_check(struct cpuinfo_x86 *c)
236 {
237         /* calling is from identify_secondary_cpu() ? */
238         if (!c->cpu_index)
239                 return;
240
241         /*
242          * Mask B, Pentium, but not Pentium MMX
243          */
244         if (c->x86 == 5 &&
245             c->x86_mask >= 1 && c->x86_mask <= 4 &&
246             c->x86_model <= 3) {
247                 /*
248                  * Remember we have B step Pentia with bugs
249                  */
250                 WARN_ONCE(1, "WARNING: SMP operation may be unreliable"
251                                     "with B stepping processors.\n");
252         }
253 }
254
255 static int forcepae;
256 static int __init forcepae_setup(char *__unused)
257 {
258         forcepae = 1;
259         return 1;
260 }
261 __setup("forcepae", forcepae_setup);
262
263 static void intel_workarounds(struct cpuinfo_x86 *c)
264 {
265 #ifdef CONFIG_X86_F00F_BUG
266         /*
267          * All models of Pentium and Pentium with MMX technology CPUs
268          * have the F0 0F bug, which lets nonprivileged users lock up the
269          * system. Announce that the fault handler will be checking for it.
270          * The Quark is also family 5, but does not have the same bug.
271          */
272         clear_cpu_bug(c, X86_BUG_F00F);
273         if (c->x86 == 5 && c->x86_model < 9) {
274                 static int f00f_workaround_enabled;
275
276                 set_cpu_bug(c, X86_BUG_F00F);
277                 if (!f00f_workaround_enabled) {
278                         pr_notice("Intel Pentium with F0 0F bug - workaround enabled.\n");
279                         f00f_workaround_enabled = 1;
280                 }
281         }
282 #endif
283
284         /*
285          * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until
286          * model 3 mask 3
287          */
288         if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
289                 clear_cpu_cap(c, X86_FEATURE_SEP);
290
291         /*
292          * PAE CPUID issue: many Pentium M report no PAE but may have a
293          * functionally usable PAE implementation.
294          * Forcefully enable PAE if kernel parameter "forcepae" is present.
295          */
296         if (forcepae) {
297                 pr_warn("PAE forced!\n");
298                 set_cpu_cap(c, X86_FEATURE_PAE);
299                 add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE);
300         }
301
302         /*
303          * P4 Xeon erratum 037 workaround.
304          * Hardware prefetcher may cause stale data to be loaded into the cache.
305          */
306         if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
307                 if (msr_set_bit(MSR_IA32_MISC_ENABLE,
308                                 MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) > 0) {
309                         pr_info("CPU: C0 stepping P4 Xeon detected.\n");
310                         pr_info("CPU: Disabling hardware prefetching (Erratum 037)\n");
311                 }
312         }
313
314         /*
315          * See if we have a good local APIC by checking for buggy Pentia,
316          * i.e. all B steppings and the C2 stepping of P54C when using their
317          * integrated APIC (see 11AP erratum in "Pentium Processor
318          * Specification Update").
319          */
320         if (boot_cpu_has(X86_FEATURE_APIC) && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
321             (c->x86_mask < 0x6 || c->x86_mask == 0xb))
322                 set_cpu_bug(c, X86_BUG_11AP);
323
324
325 #ifdef CONFIG_X86_INTEL_USERCOPY
326         /*
327          * Set up the preferred alignment for movsl bulk memory moves
328          */
329         switch (c->x86) {
330         case 4:         /* 486: untested */
331                 break;
332         case 5:         /* Old Pentia: untested */
333                 break;
334         case 6:         /* PII/PIII only like movsl with 8-byte alignment */
335                 movsl_mask.mask = 7;
336                 break;
337         case 15:        /* P4 is OK down to 8-byte alignment */
338                 movsl_mask.mask = 7;
339                 break;
340         }
341 #endif
342
343         intel_smp_check(c);
344 }
345 #else
346 static void intel_workarounds(struct cpuinfo_x86 *c)
347 {
348 }
349 #endif
350
351 static void srat_detect_node(struct cpuinfo_x86 *c)
352 {
353 #ifdef CONFIG_NUMA
354         unsigned node;
355         int cpu = smp_processor_id();
356
357         /* Don't do the funky fallback heuristics the AMD version employs
358            for now. */
359         node = numa_cpu_node(cpu);
360         if (node == NUMA_NO_NODE || !node_online(node)) {
361                 /* reuse the value from init_cpu_to_node() */
362                 node = cpu_to_node(cpu);
363         }
364         numa_set_node(cpu, node);
365 #endif
366 }
367
368 /*
369  * find out the number of processor cores on the die
370  */
371 static int intel_num_cpu_cores(struct cpuinfo_x86 *c)
372 {
373         unsigned int eax, ebx, ecx, edx;
374
375         if (!IS_ENABLED(CONFIG_SMP) || c->cpuid_level < 4)
376                 return 1;
377
378         /* Intel has a non-standard dependency on %ecx for this CPUID level. */
379         cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
380         if (eax & 0x1f)
381                 return (eax >> 26) + 1;
382         else
383                 return 1;
384 }
385
386 static void detect_vmx_virtcap(struct cpuinfo_x86 *c)
387 {
388         /* Intel VMX MSR indicated features */
389 #define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW    0x00200000
390 #define X86_VMX_FEATURE_PROC_CTLS_VNMI          0x00400000
391 #define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS      0x80000000
392 #define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC    0x00000001
393 #define X86_VMX_FEATURE_PROC_CTLS2_EPT          0x00000002
394 #define X86_VMX_FEATURE_PROC_CTLS2_VPID         0x00000020
395
396         u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2;
397
398         clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
399         clear_cpu_cap(c, X86_FEATURE_VNMI);
400         clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
401         clear_cpu_cap(c, X86_FEATURE_EPT);
402         clear_cpu_cap(c, X86_FEATURE_VPID);
403
404         rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high);
405         msr_ctl = vmx_msr_high | vmx_msr_low;
406         if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)
407                 set_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
408         if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI)
409                 set_cpu_cap(c, X86_FEATURE_VNMI);
410         if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) {
411                 rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2,
412                       vmx_msr_low, vmx_msr_high);
413                 msr_ctl2 = vmx_msr_high | vmx_msr_low;
414                 if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) &&
415                     (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW))
416                         set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
417                 if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT)
418                         set_cpu_cap(c, X86_FEATURE_EPT);
419                 if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID)
420                         set_cpu_cap(c, X86_FEATURE_VPID);
421         }
422 }
423
424 static void init_intel_energy_perf(struct cpuinfo_x86 *c)
425 {
426         u64 epb;
427
428         /*
429          * Initialize MSR_IA32_ENERGY_PERF_BIAS if not already initialized.
430          * (x86_energy_perf_policy(8) is available to change it at run-time.)
431          */
432         if (!cpu_has(c, X86_FEATURE_EPB))
433                 return;
434
435         rdmsrl(MSR_IA32_ENERGY_PERF_BIAS, epb);
436         if ((epb & 0xF) != ENERGY_PERF_BIAS_PERFORMANCE)
437                 return;
438
439         pr_warn_once("ENERGY_PERF_BIAS: Set to 'normal', was 'performance'\n");
440         pr_warn_once("ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)\n");
441         epb = (epb & ~0xF) | ENERGY_PERF_BIAS_NORMAL;
442         wrmsrl(MSR_IA32_ENERGY_PERF_BIAS, epb);
443 }
444
445 static void intel_bsp_resume(struct cpuinfo_x86 *c)
446 {
447         /*
448          * MSR_IA32_ENERGY_PERF_BIAS is lost across suspend/resume,
449          * so reinitialize it properly like during bootup:
450          */
451         init_intel_energy_perf(c);
452 }
453
454 static void init_intel(struct cpuinfo_x86 *c)
455 {
456         unsigned int l2 = 0;
457
458         early_init_intel(c);
459
460         intel_workarounds(c);
461
462         /*
463          * Detect the extended topology information if available. This
464          * will reinitialise the initial_apicid which will be used
465          * in init_intel_cacheinfo()
466          */
467         detect_extended_topology(c);
468
469         if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
470                 /*
471                  * let's use the legacy cpuid vector 0x1 and 0x4 for topology
472                  * detection.
473                  */
474                 c->x86_max_cores = intel_num_cpu_cores(c);
475 #ifdef CONFIG_X86_32
476                 detect_ht(c);
477 #endif
478         }
479
480         l2 = init_intel_cacheinfo(c);
481
482         /* Detect legacy cache sizes if init_intel_cacheinfo did not */
483         if (l2 == 0) {
484                 cpu_detect_cache_sizes(c);
485                 l2 = c->x86_cache_size;
486         }
487
488         if (c->cpuid_level > 9) {
489                 unsigned eax = cpuid_eax(10);
490                 /* Check for version and the number of counters */
491                 if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
492                         set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
493         }
494
495         if (cpu_has(c, X86_FEATURE_XMM2))
496                 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
497
498         if (boot_cpu_has(X86_FEATURE_DS)) {
499                 unsigned int l1;
500                 rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
501                 if (!(l1 & (1<<11)))
502                         set_cpu_cap(c, X86_FEATURE_BTS);
503                 if (!(l1 & (1<<12)))
504                         set_cpu_cap(c, X86_FEATURE_PEBS);
505         }
506
507         if (c->x86 == 6 && boot_cpu_has(X86_FEATURE_CLFLUSH) &&
508             (c->x86_model == 29 || c->x86_model == 46 || c->x86_model == 47))
509                 set_cpu_bug(c, X86_BUG_CLFLUSH_MONITOR);
510
511 #ifdef CONFIG_X86_64
512         if (c->x86 == 15)
513                 c->x86_cache_alignment = c->x86_clflush_size * 2;
514         if (c->x86 == 6)
515                 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
516 #else
517         /*
518          * Names for the Pentium II/Celeron processors
519          * detectable only by also checking the cache size.
520          * Dixon is NOT a Celeron.
521          */
522         if (c->x86 == 6) {
523                 char *p = NULL;
524
525                 switch (c->x86_model) {
526                 case 5:
527                         if (l2 == 0)
528                                 p = "Celeron (Covington)";
529                         else if (l2 == 256)
530                                 p = "Mobile Pentium II (Dixon)";
531                         break;
532
533                 case 6:
534                         if (l2 == 128)
535                                 p = "Celeron (Mendocino)";
536                         else if (c->x86_mask == 0 || c->x86_mask == 5)
537                                 p = "Celeron-A";
538                         break;
539
540                 case 8:
541                         if (l2 == 128)
542                                 p = "Celeron (Coppermine)";
543                         break;
544                 }
545
546                 if (p)
547                         strcpy(c->x86_model_id, p);
548         }
549
550         if (c->x86 == 15)
551                 set_cpu_cap(c, X86_FEATURE_P4);
552         if (c->x86 == 6)
553                 set_cpu_cap(c, X86_FEATURE_P3);
554 #endif
555
556         /* Work around errata */
557         srat_detect_node(c);
558
559         if (cpu_has(c, X86_FEATURE_VMX))
560                 detect_vmx_virtcap(c);
561
562         init_intel_energy_perf(c);
563 }
564
565 #ifdef CONFIG_X86_32
566 static unsigned int intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
567 {
568         /*
569          * Intel PIII Tualatin. This comes in two flavours.
570          * One has 256kb of cache, the other 512. We have no way
571          * to determine which, so we use a boottime override
572          * for the 512kb model, and assume 256 otherwise.
573          */
574         if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
575                 size = 256;
576
577         /*
578          * Intel Quark SoC X1000 contains a 4-way set associative
579          * 16K cache with a 16 byte cache line and 256 lines per tag
580          */
581         if ((c->x86 == 5) && (c->x86_model == 9))
582                 size = 16;
583         return size;
584 }
585 #endif
586
587 #define TLB_INST_4K     0x01
588 #define TLB_INST_4M     0x02
589 #define TLB_INST_2M_4M  0x03
590
591 #define TLB_INST_ALL    0x05
592 #define TLB_INST_1G     0x06
593
594 #define TLB_DATA_4K     0x11
595 #define TLB_DATA_4M     0x12
596 #define TLB_DATA_2M_4M  0x13
597 #define TLB_DATA_4K_4M  0x14
598
599 #define TLB_DATA_1G     0x16
600
601 #define TLB_DATA0_4K    0x21
602 #define TLB_DATA0_4M    0x22
603 #define TLB_DATA0_2M_4M 0x23
604
605 #define STLB_4K         0x41
606 #define STLB_4K_2M      0x42
607
608 static const struct _tlb_table intel_tlb_table[] = {
609         { 0x01, TLB_INST_4K,            32,     " TLB_INST 4 KByte pages, 4-way set associative" },
610         { 0x02, TLB_INST_4M,            2,      " TLB_INST 4 MByte pages, full associative" },
611         { 0x03, TLB_DATA_4K,            64,     " TLB_DATA 4 KByte pages, 4-way set associative" },
612         { 0x04, TLB_DATA_4M,            8,      " TLB_DATA 4 MByte pages, 4-way set associative" },
613         { 0x05, TLB_DATA_4M,            32,     " TLB_DATA 4 MByte pages, 4-way set associative" },
614         { 0x0b, TLB_INST_4M,            4,      " TLB_INST 4 MByte pages, 4-way set associative" },
615         { 0x4f, TLB_INST_4K,            32,     " TLB_INST 4 KByte pages */" },
616         { 0x50, TLB_INST_ALL,           64,     " TLB_INST 4 KByte and 2-MByte or 4-MByte pages" },
617         { 0x51, TLB_INST_ALL,           128,    " TLB_INST 4 KByte and 2-MByte or 4-MByte pages" },
618         { 0x52, TLB_INST_ALL,           256,    " TLB_INST 4 KByte and 2-MByte or 4-MByte pages" },
619         { 0x55, TLB_INST_2M_4M,         7,      " TLB_INST 2-MByte or 4-MByte pages, fully associative" },
620         { 0x56, TLB_DATA0_4M,           16,     " TLB_DATA0 4 MByte pages, 4-way set associative" },
621         { 0x57, TLB_DATA0_4K,           16,     " TLB_DATA0 4 KByte pages, 4-way associative" },
622         { 0x59, TLB_DATA0_4K,           16,     " TLB_DATA0 4 KByte pages, fully associative" },
623         { 0x5a, TLB_DATA0_2M_4M,        32,     " TLB_DATA0 2-MByte or 4 MByte pages, 4-way set associative" },
624         { 0x5b, TLB_DATA_4K_4M,         64,     " TLB_DATA 4 KByte and 4 MByte pages" },
625         { 0x5c, TLB_DATA_4K_4M,         128,    " TLB_DATA 4 KByte and 4 MByte pages" },
626         { 0x5d, TLB_DATA_4K_4M,         256,    " TLB_DATA 4 KByte and 4 MByte pages" },
627         { 0x61, TLB_INST_4K,            48,     " TLB_INST 4 KByte pages, full associative" },
628         { 0x63, TLB_DATA_1G,            4,      " TLB_DATA 1 GByte pages, 4-way set associative" },
629         { 0x76, TLB_INST_2M_4M,         8,      " TLB_INST 2-MByte or 4-MByte pages, fully associative" },
630         { 0xb0, TLB_INST_4K,            128,    " TLB_INST 4 KByte pages, 4-way set associative" },
631         { 0xb1, TLB_INST_2M_4M,         4,      " TLB_INST 2M pages, 4-way, 8 entries or 4M pages, 4-way entries" },
632         { 0xb2, TLB_INST_4K,            64,     " TLB_INST 4KByte pages, 4-way set associative" },
633         { 0xb3, TLB_DATA_4K,            128,    " TLB_DATA 4 KByte pages, 4-way set associative" },
634         { 0xb4, TLB_DATA_4K,            256,    " TLB_DATA 4 KByte pages, 4-way associative" },
635         { 0xb5, TLB_INST_4K,            64,     " TLB_INST 4 KByte pages, 8-way set associative" },
636         { 0xb6, TLB_INST_4K,            128,    " TLB_INST 4 KByte pages, 8-way set associative" },
637         { 0xba, TLB_DATA_4K,            64,     " TLB_DATA 4 KByte pages, 4-way associative" },
638         { 0xc0, TLB_DATA_4K_4M,         8,      " TLB_DATA 4 KByte and 4 MByte pages, 4-way associative" },
639         { 0xc1, STLB_4K_2M,             1024,   " STLB 4 KByte and 2 MByte pages, 8-way associative" },
640         { 0xc2, TLB_DATA_2M_4M,         16,     " DTLB 2 MByte/4MByte pages, 4-way associative" },
641         { 0xca, STLB_4K,                512,    " STLB 4 KByte pages, 4-way associative" },
642         { 0x00, 0, 0 }
643 };
644
645 static void intel_tlb_lookup(const unsigned char desc)
646 {
647         unsigned char k;
648         if (desc == 0)
649                 return;
650
651         /* look up this descriptor in the table */
652         for (k = 0; intel_tlb_table[k].descriptor != desc && \
653                         intel_tlb_table[k].descriptor != 0; k++)
654                 ;
655
656         if (intel_tlb_table[k].tlb_type == 0)
657                 return;
658
659         switch (intel_tlb_table[k].tlb_type) {
660         case STLB_4K:
661                 if (tlb_lli_4k[ENTRIES] < intel_tlb_table[k].entries)
662                         tlb_lli_4k[ENTRIES] = intel_tlb_table[k].entries;
663                 if (tlb_lld_4k[ENTRIES] < intel_tlb_table[k].entries)
664                         tlb_lld_4k[ENTRIES] = intel_tlb_table[k].entries;
665                 break;
666         case STLB_4K_2M:
667                 if (tlb_lli_4k[ENTRIES] < intel_tlb_table[k].entries)
668                         tlb_lli_4k[ENTRIES] = intel_tlb_table[k].entries;
669                 if (tlb_lld_4k[ENTRIES] < intel_tlb_table[k].entries)
670                         tlb_lld_4k[ENTRIES] = intel_tlb_table[k].entries;
671                 if (tlb_lli_2m[ENTRIES] < intel_tlb_table[k].entries)
672                         tlb_lli_2m[ENTRIES] = intel_tlb_table[k].entries;
673                 if (tlb_lld_2m[ENTRIES] < intel_tlb_table[k].entries)
674                         tlb_lld_2m[ENTRIES] = intel_tlb_table[k].entries;
675                 if (tlb_lli_4m[ENTRIES] < intel_tlb_table[k].entries)
676                         tlb_lli_4m[ENTRIES] = intel_tlb_table[k].entries;
677                 if (tlb_lld_4m[ENTRIES] < intel_tlb_table[k].entries)
678                         tlb_lld_4m[ENTRIES] = intel_tlb_table[k].entries;
679                 break;
680         case TLB_INST_ALL:
681                 if (tlb_lli_4k[ENTRIES] < intel_tlb_table[k].entries)
682                         tlb_lli_4k[ENTRIES] = intel_tlb_table[k].entries;
683                 if (tlb_lli_2m[ENTRIES] < intel_tlb_table[k].entries)
684                         tlb_lli_2m[ENTRIES] = intel_tlb_table[k].entries;
685                 if (tlb_lli_4m[ENTRIES] < intel_tlb_table[k].entries)
686                         tlb_lli_4m[ENTRIES] = intel_tlb_table[k].entries;
687                 break;
688         case TLB_INST_4K:
689                 if (tlb_lli_4k[ENTRIES] < intel_tlb_table[k].entries)
690                         tlb_lli_4k[ENTRIES] = intel_tlb_table[k].entries;
691                 break;
692         case TLB_INST_4M:
693                 if (tlb_lli_4m[ENTRIES] < intel_tlb_table[k].entries)
694                         tlb_lli_4m[ENTRIES] = intel_tlb_table[k].entries;
695                 break;
696         case TLB_INST_2M_4M:
697                 if (tlb_lli_2m[ENTRIES] < intel_tlb_table[k].entries)
698                         tlb_lli_2m[ENTRIES] = intel_tlb_table[k].entries;
699                 if (tlb_lli_4m[ENTRIES] < intel_tlb_table[k].entries)
700                         tlb_lli_4m[ENTRIES] = intel_tlb_table[k].entries;
701                 break;
702         case TLB_DATA_4K:
703         case TLB_DATA0_4K:
704                 if (tlb_lld_4k[ENTRIES] < intel_tlb_table[k].entries)
705                         tlb_lld_4k[ENTRIES] = intel_tlb_table[k].entries;
706                 break;
707         case TLB_DATA_4M:
708         case TLB_DATA0_4M:
709                 if (tlb_lld_4m[ENTRIES] < intel_tlb_table[k].entries)
710                         tlb_lld_4m[ENTRIES] = intel_tlb_table[k].entries;
711                 break;
712         case TLB_DATA_2M_4M:
713         case TLB_DATA0_2M_4M:
714                 if (tlb_lld_2m[ENTRIES] < intel_tlb_table[k].entries)
715                         tlb_lld_2m[ENTRIES] = intel_tlb_table[k].entries;
716                 if (tlb_lld_4m[ENTRIES] < intel_tlb_table[k].entries)
717                         tlb_lld_4m[ENTRIES] = intel_tlb_table[k].entries;
718                 break;
719         case TLB_DATA_4K_4M:
720                 if (tlb_lld_4k[ENTRIES] < intel_tlb_table[k].entries)
721                         tlb_lld_4k[ENTRIES] = intel_tlb_table[k].entries;
722                 if (tlb_lld_4m[ENTRIES] < intel_tlb_table[k].entries)
723                         tlb_lld_4m[ENTRIES] = intel_tlb_table[k].entries;
724                 break;
725         case TLB_DATA_1G:
726                 if (tlb_lld_1g[ENTRIES] < intel_tlb_table[k].entries)
727                         tlb_lld_1g[ENTRIES] = intel_tlb_table[k].entries;
728                 break;
729         }
730 }
731
732 static void intel_detect_tlb(struct cpuinfo_x86 *c)
733 {
734         int i, j, n;
735         unsigned int regs[4];
736         unsigned char *desc = (unsigned char *)regs;
737
738         if (c->cpuid_level < 2)
739                 return;
740
741         /* Number of times to iterate */
742         n = cpuid_eax(2) & 0xFF;
743
744         for (i = 0 ; i < n ; i++) {
745                 cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
746
747                 /* If bit 31 is set, this is an unknown format */
748                 for (j = 0 ; j < 3 ; j++)
749                         if (regs[j] & (1 << 31))
750                                 regs[j] = 0;
751
752                 /* Byte 0 is level count, not a descriptor */
753                 for (j = 1 ; j < 16 ; j++)
754                         intel_tlb_lookup(desc[j]);
755         }
756 }
757
758 static const struct cpu_dev intel_cpu_dev = {
759         .c_vendor       = "Intel",
760         .c_ident        = { "GenuineIntel" },
761 #ifdef CONFIG_X86_32
762         .legacy_models = {
763                 { .family = 4, .model_names =
764                   {
765                           [0] = "486 DX-25/33",
766                           [1] = "486 DX-50",
767                           [2] = "486 SX",
768                           [3] = "486 DX/2",
769                           [4] = "486 SL",
770                           [5] = "486 SX/2",
771                           [7] = "486 DX/2-WB",
772                           [8] = "486 DX/4",
773                           [9] = "486 DX/4-WB"
774                   }
775                 },
776                 { .family = 5, .model_names =
777                   {
778                           [0] = "Pentium 60/66 A-step",
779                           [1] = "Pentium 60/66",
780                           [2] = "Pentium 75 - 200",
781                           [3] = "OverDrive PODP5V83",
782                           [4] = "Pentium MMX",
783                           [7] = "Mobile Pentium 75 - 200",
784                           [8] = "Mobile Pentium MMX",
785                           [9] = "Quark SoC X1000",
786                   }
787                 },
788                 { .family = 6, .model_names =
789                   {
790                           [0] = "Pentium Pro A-step",
791                           [1] = "Pentium Pro",
792                           [3] = "Pentium II (Klamath)",
793                           [4] = "Pentium II (Deschutes)",
794                           [5] = "Pentium II (Deschutes)",
795                           [6] = "Mobile Pentium II",
796                           [7] = "Pentium III (Katmai)",
797                           [8] = "Pentium III (Coppermine)",
798                           [10] = "Pentium III (Cascades)",
799                           [11] = "Pentium III (Tualatin)",
800                   }
801                 },
802                 { .family = 15, .model_names =
803                   {
804                           [0] = "Pentium 4 (Unknown)",
805                           [1] = "Pentium 4 (Willamette)",
806                           [2] = "Pentium 4 (Northwood)",
807                           [4] = "Pentium 4 (Foster)",
808                           [5] = "Pentium 4 (Foster)",
809                   }
810                 },
811         },
812         .legacy_cache_size = intel_size_cache,
813 #endif
814         .c_detect_tlb   = intel_detect_tlb,
815         .c_early_init   = early_init_intel,
816         .c_init         = init_intel,
817         .c_bsp_resume   = intel_bsp_resume,
818         .c_x86_vendor   = X86_VENDOR_INTEL,
819 };
820
821 cpu_dev_register(intel_cpu_dev);
822