drivers/clk/clk-cdce925.c

   1 /*
   2  * Driver for TI Dual PLL CDCE925 clock synthesizer
   3  *
   4  * This driver always connects the Y1 to the input clock, Y2/Y3 to PLL1
   5  * and Y4/Y5 to PLL2. PLL frequency is set on a first-come-first-serve
   6  * basis. Clients can directly request any frequency that the chip can
   7  * deliver using the standard clk framework. In addition, the device can
   8  * be configured and activated via the devicetree.
   9  *
  10  * Copyright (C) 2014, Topic Embedded Products
  11  * Licenced under GPL
  12  */
  13 #include <linux/clk.h>
  14 #include <linux/clk-provider.h>
  15 #include <linux/delay.h>
  16 #include <linux/module.h>
  17 #include <linux/i2c.h>
  18 #include <linux/regmap.h>
  19 #include <linux/slab.h>
  20 #include <linux/gcd.h>
  21
  22 /* The chip has 2 PLLs which can be routed through dividers to 5 outputs.
  23  * Model this as 2 PLL clocks which are parents to the outputs.
  24  */
  25 #define NUMBER_OF_PLLS  2
  26 #define NUMBER_OF_OUTPUTS       5
  27
  28 #define CDCE925_REG_GLOBAL1     0x01
  29 #define CDCE925_REG_Y1SPIPDIVH  0x02
  30 #define CDCE925_REG_PDIVL       0x03
  31 #define CDCE925_REG_XCSEL       0x05
  32 /* PLL parameters start at 0x10, steps of 0x10 */
  33 #define CDCE925_OFFSET_PLL      0x10
  34 /* Add CDCE925_OFFSET_PLL * (pll) to these registers before sending */
  35 #define CDCE925_PLL_MUX_OUTPUTS 0x14
  36 #define CDCE925_PLL_MULDIV      0x18
  37
  38 #define CDCE925_PLL_FREQUENCY_MIN        80000000ul
  39 #define CDCE925_PLL_FREQUENCY_MAX       230000000ul
  40 struct clk_cdce925_chip;
  41
  42 struct clk_cdce925_output {
  43         struct clk_hw hw;
  44         struct clk_cdce925_chip *chip;
  45         u8 index;
  46         u16 pdiv; /* 1..127 for Y2-Y5; 1..1023 for Y1 */
  47 };
  48 #define to_clk_cdce925_output(_hw) \
  49         container_of(_hw, struct clk_cdce925_output, hw)
  50
  51 struct clk_cdce925_pll {
  52         struct clk_hw hw;
  53         struct clk_cdce925_chip *chip;
  54         u8 index;
  55         u16 m;   /* 1..511 */
  56         u16 n;   /* 1..4095 */
  57 };
  58 #define to_clk_cdce925_pll(_hw) container_of(_hw, struct clk_cdce925_pll, hw)
  59
  60 struct clk_cdce925_chip {
  61         struct regmap *regmap;
  62         struct i2c_client *i2c_client;
  63         struct clk_cdce925_pll pll[NUMBER_OF_PLLS];
  64         struct clk_cdce925_output clk[NUMBER_OF_OUTPUTS];
  65 };
  66
  67 /* ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** */
  68
  69 static unsigned long cdce925_pll_calculate_rate(unsigned long parent_rate,
  70         u16 n, u16 m)
  71 {
  72         if ((!m || !n) || (m == n))
  73                 return parent_rate; /* In bypass mode runs at same frequency */
  74         return mult_frac(parent_rate, (unsigned long)n, (unsigned long)m);
  75 }
  76
  77 static unsigned long cdce925_pll_recalc_rate(struct clk_hw *hw,
  78                 unsigned long parent_rate)
  79 {
  80         /* Output frequency of PLL is Fout = (Fin/Pdiv)*(N/M) */
  81         struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
  82
  83         return cdce925_pll_calculate_rate(parent_rate, data->n, data->m);
  84 }
  85
  86 static void cdce925_pll_find_rate(unsigned long rate,
  87                 unsigned long parent_rate, u16 *n, u16 *m)
  88 {
  89         unsigned long un;
  90         unsigned long um;
  91         unsigned long g;
  92
  93         if (rate <= parent_rate) {
  94                 /* Can always deliver parent_rate in bypass mode */
  95                 rate = parent_rate;
  96                 *n = 0;
  97                 *m = 0;
  98         } else {
  99                 /* In PLL mode, need to apply min/max range */
 100                 if (rate < CDCE925_PLL_FREQUENCY_MIN)
 101                         rate = CDCE925_PLL_FREQUENCY_MIN;
 102                 else if (rate > CDCE925_PLL_FREQUENCY_MAX)
 103                         rate = CDCE925_PLL_FREQUENCY_MAX;
 104
 105                 g = gcd(rate, parent_rate);
 106                 um = parent_rate / g;
 107                 un = rate / g;
 108                 /* When outside hw range, reduce to fit (rounding errors) */
 109                 while ((un > 4095) || (um > 511)) {
 110                         un >>= 1;
 111                         um >>= 1;
 112                 }
 113                 if (un == 0)
 114                         un = 1;
 115                 if (um == 0)
 116                         um = 1;
 117
 118                 *n = un;
 119                 *m = um;
 120         }
 121 }
 122
 123 static long cdce925_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 124                 unsigned long *parent_rate)
 125 {
 126         u16 n, m;
 127
 128         cdce925_pll_find_rate(rate, *parent_rate, &n, &m);
 129         return (long)cdce925_pll_calculate_rate(*parent_rate, n, m);
 130 }
 131
 132 static int cdce925_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 133                 unsigned long parent_rate)
 134 {
 135         struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
 136
 137         if (!rate || (rate == parent_rate)) {
 138                 data->m = 0; /* Bypass mode */
 139                 data->n = 0;
 140                 return 0;
 141         }
 142
 143         if ((rate < CDCE925_PLL_FREQUENCY_MIN) ||
 144                 (rate > CDCE925_PLL_FREQUENCY_MAX)) {
 145                 pr_debug("%s: rate %lu outside PLL range.\n", __func__, rate);
 146                 return -EINVAL;
 147         }
 148
 149         if (rate < parent_rate) {
 150                 pr_debug("%s: rate %lu less than parent rate %lu.\n", __func__,
 151                         rate, parent_rate);
 152                 return -EINVAL;
 153         }
 154
 155         cdce925_pll_find_rate(rate, parent_rate, &data->n, &data->m);
 156         return 0;
 157 }
 158
 159
 160 /* calculate p = max(0, 4 - int(log2 (n/m))) */
 161 static u8 cdce925_pll_calc_p(u16 n, u16 m)
 162 {
 163         u8 p;
 164         u16 r = n / m;
 165
 166         if (r >= 16)
 167                 return 0;
 168         p = 4;
 169         while (r > 1) {
 170                 r >>= 1;
 171                 --p;
 172         }
 173         return p;
 174 }
 175
 176 /* Returns VCO range bits for VCO1_0_RANGE */
 177 static u8 cdce925_pll_calc_range_bits(struct clk_hw *hw, u16 n, u16 m)
 178 {
 179         struct clk *parent = clk_get_parent(hw->clk);
 180         unsigned long rate = clk_get_rate(parent);
 181
 182         rate = mult_frac(rate, (unsigned long)n, (unsigned long)m);
 183         if (rate >= 175000000)
 184                 return 0x3;
 185         if (rate >= 150000000)
 186                 return 0x02;
 187         if (rate >= 125000000)
 188                 return 0x01;
 189         return 0x00;
 190 }
 191
 192 /* I2C clock, hence everything must happen in (un)prepare because this
 193  * may sleep */
 194 static int cdce925_pll_prepare(struct clk_hw *hw)
 195 {
 196         struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
 197         u16 n = data->n;
 198         u16 m = data->m;
 199         u16 r;
 200         u8 q;
 201         u8 p;
 202         u16 nn;
 203         u8 pll[4]; /* Bits are spread out over 4 byte registers */
 204         u8 reg_ofs = data->index * CDCE925_OFFSET_PLL;
 205         unsigned i;
 206
 207         if ((!m || !n) || (m == n)) {
 208                 /* Set PLL mux to bypass mode, leave the rest as is */
 209                 regmap_update_bits(data->chip->regmap,
 210                         reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x80);
 211         } else {
 212                 /* According to data sheet: */
 213                 /* p = max(0, 4 - int(log2 (n/m))) */
 214                 p = cdce925_pll_calc_p(n, m);
 215                 /* nn = n * 2^p */
 216                 nn = n * BIT(p);
 217                 /* q = int(nn/m) */
 218                 q = nn / m;
 219                 if ((q < 16) || (q > 63)) {
 220                         pr_debug("%s invalid q=%d\n", __func__, q);
 221                         return -EINVAL;
 222                 }
 223                 r = nn - (m*q);
 224                 if (r > 511) {
 225                         pr_debug("%s invalid r=%d\n", __func__, r);
 226                         return -EINVAL;
 227                 }
 228                 pr_debug("%s n=%d m=%d p=%d q=%d r=%d\n", __func__,
 229                         n, m, p, q, r);
 230                 /* encode into register bits */
 231                 pll[0] = n >> 4;
 232                 pll[1] = ((n & 0x0F) << 4) | ((r >> 5) & 0x0F);
 233                 pll[2] = ((r & 0x1F) << 3) | ((q >> 3) & 0x07);
 234                 pll[3] = ((q & 0x07) << 5) | (p << 2) |
 235                                 cdce925_pll_calc_range_bits(hw, n, m);
 236                 /* Write to registers */
 237                 for (i = 0; i < ARRAY_SIZE(pll); ++i)
 238                         regmap_write(data->chip->regmap,
 239                                 reg_ofs + CDCE925_PLL_MULDIV + i, pll[i]);
 240                 /* Enable PLL */
 241                 regmap_update_bits(data->chip->regmap,
 242                         reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x00);
 243         }
 244
 245         return 0;
 246 }
 247
 248 static void cdce925_pll_unprepare(struct clk_hw *hw)
 249 {
 250         struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
 251         u8 reg_ofs = data->index * CDCE925_OFFSET_PLL;
 252
 253         regmap_update_bits(data->chip->regmap,
 254                         reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x80);
 255 }
 256
 257 static const struct clk_ops cdce925_pll_ops = {
 258         .prepare = cdce925_pll_prepare,
 259         .unprepare = cdce925_pll_unprepare,
 260         .recalc_rate = cdce925_pll_recalc_rate,
 261         .round_rate = cdce925_pll_round_rate,
 262         .set_rate = cdce925_pll_set_rate,
 263 };
 264
 265
 266 static void cdce925_clk_set_pdiv(struct clk_cdce925_output *data, u16 pdiv)
 267 {
 268         switch (data->index) {
 269         case 0:
 270                 regmap_update_bits(data->chip->regmap,
 271                         CDCE925_REG_Y1SPIPDIVH,
 272                         0x03, (pdiv >> 8) & 0x03);
 273                 regmap_write(data->chip->regmap, 0x03, pdiv & 0xFF);
 274                 break;
 275         case 1:
 276                 regmap_update_bits(data->chip->regmap, 0x16, 0x7F, pdiv);
 277                 break;
 278         case 2:
 279                 regmap_update_bits(data->chip->regmap, 0x17, 0x7F, pdiv);
 280                 break;
 281         case 3:
 282                 regmap_update_bits(data->chip->regmap, 0x26, 0x7F, pdiv);
 283                 break;
 284         case 4:
 285                 regmap_update_bits(data->chip->regmap, 0x27, 0x7F, pdiv);
 286                 break;
 287         }
 288 }
 289
 290 static void cdce925_clk_activate(struct clk_cdce925_output *data)
 291 {
 292         switch (data->index) {
 293         case 0:
 294                 regmap_update_bits(data->chip->regmap,
 295                         CDCE925_REG_Y1SPIPDIVH, 0x0c, 0x0c);
 296                 break;
 297         case 1:
 298         case 2:
 299                 regmap_update_bits(data->chip->regmap, 0x14, 0x03, 0x03);
 300                 break;
 301         case 3:
 302         case 4:
 303                 regmap_update_bits(data->chip->regmap, 0x24, 0x03, 0x03);
 304                 break;
 305         }
 306 }
 307
 308 static int cdce925_clk_prepare(struct clk_hw *hw)
 309 {
 310         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 311
 312         cdce925_clk_set_pdiv(data, data->pdiv);
 313         cdce925_clk_activate(data);
 314         return 0;
 315 }
 316
 317 static void cdce925_clk_unprepare(struct clk_hw *hw)
 318 {
 319         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 320
 321         /* Disable clock by setting divider to "0" */
 322         cdce925_clk_set_pdiv(data, 0);
 323 }
 324
 325 static unsigned long cdce925_clk_recalc_rate(struct clk_hw *hw,
 326                 unsigned long parent_rate)
 327 {
 328         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 329
 330         if (data->pdiv)
 331                 return parent_rate / data->pdiv;
 332         return 0;
 333 }
 334
 335 static u16 cdce925_calc_divider(unsigned long rate,
 336                 unsigned long parent_rate)
 337 {
 338         unsigned long divider;
 339
 340         if (!rate)
 341                 return 0;
 342         if (rate >= parent_rate)
 343                 return 1;
 344
 345         divider = DIV_ROUND_CLOSEST(parent_rate, rate);
 346         if (divider > 0x7F)
 347                 divider = 0x7F;
 348
 349         return (u16)divider;
 350 }
 351
 352 static unsigned long cdce925_clk_best_parent_rate(
 353         struct clk_hw *hw, unsigned long rate)
 354 {
 355         struct clk *pll = clk_get_parent(hw->clk);
 356         struct clk *root = clk_get_parent(pll);
 357         unsigned long root_rate = clk_get_rate(root);
 358         unsigned long best_rate_error = rate;
 359         u16 pdiv_min;
 360         u16 pdiv_max;
 361         u16 pdiv_best;
 362         u16 pdiv_now;
 363
 364         if (root_rate % rate == 0)
 365                 return root_rate; /* Don't need the PLL, use bypass */
 366
 367         pdiv_min = (u16)max(1ul, DIV_ROUND_UP(CDCE925_PLL_FREQUENCY_MIN, rate));
 368         pdiv_max = (u16)min(127ul, CDCE925_PLL_FREQUENCY_MAX / rate);
 369
 370         if (pdiv_min > pdiv_max)
 371                 return 0; /* No can do? */
 372
 373         pdiv_best = pdiv_min;
 374         for (pdiv_now = pdiv_min; pdiv_now < pdiv_max; ++pdiv_now) {
 375                 unsigned long target_rate = rate * pdiv_now;
 376                 long pll_rate = clk_round_rate(pll, target_rate);
 377                 unsigned long actual_rate;
 378                 unsigned long rate_error;
 379
 380                 if (pll_rate <= 0)
 381                         continue;
 382                 actual_rate = pll_rate / pdiv_now;
 383                 rate_error = abs((long)actual_rate - (long)rate);
 384                 if (rate_error < best_rate_error) {
 385                         pdiv_best = pdiv_now;
 386                         best_rate_error = rate_error;
 387                 }
 388                 /* TODO: Consider PLL frequency based on smaller n/m values
 389                  * and pick the better one if the error is equal */
 390         }
 391
 392         return rate * pdiv_best;
 393 }
 394
 395 static long cdce925_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 396                 unsigned long *parent_rate)
 397 {
 398         unsigned long l_parent_rate = *parent_rate;
 399         u16 divider = cdce925_calc_divider(rate, l_parent_rate);
 400
 401         if (l_parent_rate / divider != rate) {
 402                 l_parent_rate = cdce925_clk_best_parent_rate(hw, rate);
 403                 divider = cdce925_calc_divider(rate, l_parent_rate);
 404                 *parent_rate = l_parent_rate;
 405         }
 406
 407         if (divider)
 408                 return (long)(l_parent_rate / divider);
 409         return 0;
 410 }
 411
 412 static int cdce925_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 413                 unsigned long parent_rate)
 414 {
 415         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 416
 417         data->pdiv = cdce925_calc_divider(rate, parent_rate);
 418
 419         return 0;
 420 }
 421
 422 static const struct clk_ops cdce925_clk_ops = {
 423         .prepare = cdce925_clk_prepare,
 424         .unprepare = cdce925_clk_unprepare,
 425         .recalc_rate = cdce925_clk_recalc_rate,
 426         .round_rate = cdce925_clk_round_rate,
 427         .set_rate = cdce925_clk_set_rate,
 428 };
 429
 430
 431 static u16 cdce925_y1_calc_divider(unsigned long rate,
 432                 unsigned long parent_rate)
 433 {
 434         unsigned long divider;
 435
 436         if (!rate)
 437                 return 0;
 438         if (rate >= parent_rate)
 439                 return 1;
 440
 441         divider = DIV_ROUND_CLOSEST(parent_rate, rate);
 442         if (divider > 0x3FF) /* Y1 has 10-bit divider */
 443                 divider = 0x3FF;
 444
 445         return (u16)divider;
 446 }
 447
 448 static long cdce925_clk_y1_round_rate(struct clk_hw *hw, unsigned long rate,
 449                 unsigned long *parent_rate)
 450 {
 451         unsigned long l_parent_rate = *parent_rate;
 452         u16 divider = cdce925_y1_calc_divider(rate, l_parent_rate);
 453
 454         if (divider)
 455                 return (long)(l_parent_rate / divider);
 456         return 0;
 457 }
 458
 459 static int cdce925_clk_y1_set_rate(struct clk_hw *hw, unsigned long rate,
 460                 unsigned long parent_rate)
 461 {
 462         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 463
 464         data->pdiv = cdce925_y1_calc_divider(rate, parent_rate);
 465
 466         return 0;
 467 }
 468
 469 static const struct clk_ops cdce925_clk_y1_ops = {
 470         .prepare = cdce925_clk_prepare,
 471         .unprepare = cdce925_clk_unprepare,
 472         .recalc_rate = cdce925_clk_recalc_rate,
 473         .round_rate = cdce925_clk_y1_round_rate,
 474         .set_rate = cdce925_clk_y1_set_rate,
 475 };
 476
 477
 478 static struct regmap_config cdce925_regmap_config = {
 479         .name = "configuration0",
 480         .reg_bits = 8,
 481         .val_bits = 8,
 482         .cache_type = REGCACHE_RBTREE,
 483         .max_register = 0x2F,
 484 };
 485
 486 #define CDCE925_I2C_COMMAND_BLOCK_TRANSFER      0x00
 487 #define CDCE925_I2C_COMMAND_BYTE_TRANSFER       0x80
 488
 489 static int cdce925_regmap_i2c_write(
 490         void *context, const void *data, size_t count)
 491 {
 492         struct device *dev = context;
 493         struct i2c_client *i2c = to_i2c_client(dev);
 494         int ret;
 495         u8 reg_data[2];
 496
 497         if (count != 2)
 498                 return -ENOTSUPP;
 499
 500         /* First byte is command code */
 501         reg_data[0] = CDCE925_I2C_COMMAND_BYTE_TRANSFER | ((u8 *)data)[0];
 502         reg_data[1] = ((u8 *)data)[1];
 503
 504         dev_dbg(&i2c->dev, "%s(%zu) %#x %#x\n", __func__, count,
 505                         reg_data[0], reg_data[1]);
 506
 507         ret = i2c_master_send(i2c, reg_data, count);
 508         if (likely(ret == count))
 509                 return 0;
 510         else if (ret < 0)
 511                 return ret;
 512         else
 513                 return -EIO;
 514 }
 515
 516 static int cdce925_regmap_i2c_read(void *context,
 517            const void *reg, size_t reg_size, void *val, size_t val_size)
 518 {
 519         struct device *dev = context;
 520         struct i2c_client *i2c = to_i2c_client(dev);
 521         struct i2c_msg xfer[2];
 522         int ret;
 523         u8 reg_data[2];
 524
 525         if (reg_size != 1)
 526                 return -ENOTSUPP;
 527
 528         xfer[0].addr = i2c->addr;
 529         xfer[0].flags = 0;
 530         xfer[0].buf = reg_data;
 531         if (val_size == 1) {
 532                 reg_data[0] =
 533                         CDCE925_I2C_COMMAND_BYTE_TRANSFER | ((u8 *)reg)[0];
 534                 xfer[0].len = 1;
 535         } else {
 536                 reg_data[0] =
 537                         CDCE925_I2C_COMMAND_BLOCK_TRANSFER | ((u8 *)reg)[0];
 538                 reg_data[1] = val_size;
 539                 xfer[0].len = 2;
 540         }
 541
 542         xfer[1].addr = i2c->addr;
 543         xfer[1].flags = I2C_M_RD;
 544         xfer[1].len = val_size;
 545         xfer[1].buf = val;
 546
 547         ret = i2c_transfer(i2c->adapter, xfer, 2);
 548         if (likely(ret == 2)) {
 549                 dev_dbg(&i2c->dev, "%s(%zu, %zu) %#x %#x\n", __func__,
 550                                 reg_size, val_size, reg_data[0], *((u8 *)val));
 551                 return 0;
 552         } else if (ret < 0)
 553                 return ret;
 554         else
 555                 return -EIO;
 556 }
 557
 558 static struct clk_hw *
 559 of_clk_cdce925_get(struct of_phandle_args *clkspec, void *_data)
 560 {
 561         struct clk_cdce925_chip *data = _data;
 562         unsigned int idx = clkspec->args[0];
 563
 564         if (idx >= ARRAY_SIZE(data->clk)) {
 565                 pr_err("%s: invalid index %u\n", __func__, idx);
 566                 return ERR_PTR(-EINVAL);
 567         }
 568
 569         return &data->clk[idx].hw;
 570 }
 571
 572 /* The CDCE925 uses a funky way to read/write registers. Bulk mode is
 573  * just weird, so just use the single byte mode exclusively. */
 574 static struct regmap_bus regmap_cdce925_bus = {
 575         .write = cdce925_regmap_i2c_write,
 576         .read = cdce925_regmap_i2c_read,
 577 };
 578
 579 static int cdce925_probe(struct i2c_client *client,
 580                 const struct i2c_device_id *id)
 581 {
 582         struct clk_cdce925_chip *data;
 583         struct device_node *node = client->dev.of_node;
 584         const char *parent_name;
 585         const char *pll_clk_name[NUMBER_OF_PLLS] = {NULL,};
 586         struct clk_init_data init;
 587         u32 value;
 588         int i;
 589         int err;
 590         struct device_node *np_output;
 591         char child_name[6];
 592
 593         dev_dbg(&client->dev, "%s\n", __func__);
 594         data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 595         if (!data)
 596                 return -ENOMEM;
 597
 598         data->i2c_client = client;
 599         data->regmap = devm_regmap_init(&client->dev, &regmap_cdce925_bus,
 600                         &client->dev, &cdce925_regmap_config);
 601         if (IS_ERR(data->regmap)) {
 602                 dev_err(&client->dev, "failed to allocate register map\n");
 603                 return PTR_ERR(data->regmap);
 604         }
 605         i2c_set_clientdata(client, data);
 606
 607         parent_name = of_clk_get_parent_name(node, 0);
 608         if (!parent_name) {
 609                 dev_err(&client->dev, "missing parent clock\n");
 610                 return -ENODEV;
 611         }
 612         dev_dbg(&client->dev, "parent is: %s\n", parent_name);
 613
 614         if (of_property_read_u32(node, "xtal-load-pf", &value) == 0)
 615                 regmap_write(data->regmap,
 616                         CDCE925_REG_XCSEL, (value << 3) & 0xF8);
 617         /* PWDN bit */
 618         regmap_update_bits(data->regmap, CDCE925_REG_GLOBAL1, BIT(4), 0);
 619
 620         /* Set input source for Y1 to be the XTAL */
 621         regmap_update_bits(data->regmap, 0x02, BIT(7), 0);
 622
 623         init.ops = &cdce925_pll_ops;
 624         init.flags = 0;
 625         init.parent_names = &parent_name;
 626         init.num_parents = parent_name ? 1 : 0;
 627
 628         /* Register PLL clocks */
 629         for (i = 0; i < NUMBER_OF_PLLS; ++i) {
 630                 pll_clk_name[i] = kasprintf(GFP_KERNEL, "%s.pll%d",
 631                         client->dev.of_node->name, i);
 632                 init.name = pll_clk_name[i];
 633                 data->pll[i].chip = data;
 634                 data->pll[i].hw.init = &init;
 635                 data->pll[i].index = i;
 636                 err = devm_clk_hw_register(&client->dev, &data->pll[i].hw);
 637                 if (err) {
 638                         dev_err(&client->dev, "Failed register PLL %d\n", i);
 639                         goto error;
 640                 }
 641                 sprintf(child_name, "PLL%d", i+1);
 642                 np_output = of_get_child_by_name(node, child_name);
 643                 if (!np_output)
 644                         continue;
 645                 if (!of_property_read_u32(np_output,
 646                         "clock-frequency", &value)) {
 647                         err = clk_set_rate(data->pll[i].hw.clk, value);
 648                         if (err)
 649                                 dev_err(&client->dev,
 650                                         "unable to set PLL frequency %ud\n",
 651                                         value);
 652                 }
 653                 if (!of_property_read_u32(np_output,
 654                         "spread-spectrum", &value)) {
 655                         u8 flag = of_property_read_bool(np_output,
 656                                 "spread-spectrum-center") ? 0x80 : 0x00;
 657                         regmap_update_bits(data->regmap,
 658                                 0x16 + (i*CDCE925_OFFSET_PLL),
 659                                 0x80, flag);
 660                         regmap_update_bits(data->regmap,
 661                                 0x12 + (i*CDCE925_OFFSET_PLL),
 662                                 0x07, value & 0x07);
 663                 }
 664         }
 665
 666         /* Register output clock Y1 */
 667         init.ops = &cdce925_clk_y1_ops;
 668         init.flags = 0;
 669         init.num_parents = 1;
 670         init.parent_names = &parent_name; /* Mux Y1 to input */
 671         init.name = kasprintf(GFP_KERNEL, "%s.Y1", client->dev.of_node->name);
 672         data->clk[0].chip = data;
 673         data->clk[0].hw.init = &init;
 674         data->clk[0].index = 0;
 675         data->clk[0].pdiv = 1;
 676         err = devm_clk_hw_register(&client->dev, &data->clk[0].hw);
 677         kfree(init.name); /* clock framework made a copy of the name */
 678         if (err) {
 679                 dev_err(&client->dev, "clock registration Y1 failed\n");
 680                 goto error;
 681         }
 682
 683         /* Register output clocks Y2 .. Y5*/
 684         init.ops = &cdce925_clk_ops;
 685         init.flags = CLK_SET_RATE_PARENT;
 686         init.num_parents = 1;
 687         for (i = 1; i < NUMBER_OF_OUTPUTS; ++i) {
 688                 init.name = kasprintf(GFP_KERNEL, "%s.Y%d",
 689                         client->dev.of_node->name, i+1);
 690                 data->clk[i].chip = data;
 691                 data->clk[i].hw.init = &init;
 692                 data->clk[i].index = i;
 693                 data->clk[i].pdiv = 1;
 694                 switch (i) {
 695                 case 1:
 696                 case 2:
 697                         /* Mux Y2/3 to PLL1 */
 698                         init.parent_names = &pll_clk_name[0];
 699                         break;
 700                 case 3:
 701                 case 4:
 702                         /* Mux Y4/5 to PLL2 */
 703                         init.parent_names = &pll_clk_name[1];
 704                         break;
 705                 }
 706                 err = devm_clk_hw_register(&client->dev, &data->clk[i].hw);
 707                 kfree(init.name); /* clock framework made a copy of the name */
 708                 if (err) {
 709                         dev_err(&client->dev, "clock registration failed\n");
 710                         goto error;
 711                 }
 712         }
 713
 714         /* Register the output clocks */
 715         err = of_clk_add_hw_provider(client->dev.of_node, of_clk_cdce925_get,
 716                                   data);
 717         if (err)
 718                 dev_err(&client->dev, "unable to add OF clock provider\n");
 719
 720         err = 0;
 721
 722 error:
 723         for (i = 0; i < NUMBER_OF_PLLS; ++i)
 724                 /* clock framework made a copy of the name */
 725                 kfree(pll_clk_name[i]);
 726
 727         return err;
 728 }
 729
 730 static const struct i2c_device_id cdce925_id[] = {
 731         { "cdce925", 0 },
 732         { }
 733 };
 734 MODULE_DEVICE_TABLE(i2c, cdce925_id);
 735
 736 static const struct of_device_id clk_cdce925_of_match[] = {
 737         { .compatible = "ti,cdce925" },
 738         { },
 739 };
 740 MODULE_DEVICE_TABLE(of, clk_cdce925_of_match);
 741
 742 static struct i2c_driver cdce925_driver = {
 743         .driver = {
 744                 .name = "cdce925",
 745                 .of_match_table = of_match_ptr(clk_cdce925_of_match),
 746         },
 747         .probe          = cdce925_probe,
 748         .id_table       = cdce925_id,
 749 };
 750 module_i2c_driver(cdce925_driver);
 751
 752 MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
 753 MODULE_DESCRIPTION("cdce925 driver");
 754 MODULE_LICENSE("GPL");