drivers/gpu/drm/i915/intel_lvds.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the next
  13  * paragraph) shall be included in all copies or substantial portions of the
  14  * Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  21  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  22  * DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *      Eric Anholt <eric@anholt.net>
  26  *      Dave Airlie <airlied@linux.ie>
  27  *      Jesse Barnes <jesse.barnes@intel.com>
  28  */
  29
  30 #include <acpi/button.h>
  31 #include <linux/dmi.h>
  32 #include <linux/i2c.h>
  33 #include <linux/slab.h>
  34 #include <drm/drmP.h>
  35 #include <drm/drm_crtc.h>
  36 #include <drm/drm_edid.h>
  37 #include "intel_drv.h"
  38 #include <drm/i915_drm.h>
  39 #include "i915_drv.h"
  40 #include <linux/acpi.h>
  41
  42 /* Private structure for the integrated LVDS support */
  43 struct intel_lvds_connector {
  44         struct intel_connector base;
  45
  46         struct notifier_block lid_notifier;
  47 };
  48
  49 struct intel_lvds_encoder {
  50         struct intel_encoder base;
  51
  52         u32 pfit_control;
  53         u32 pfit_pgm_ratios;
  54         bool is_dual_link;
  55         u32 reg;
  56
  57         struct intel_lvds_connector *attached_connector;
  58 };
  59
  60 static struct intel_lvds_encoder *to_lvds_encoder(struct drm_encoder *encoder)
  61 {
  62         return container_of(encoder, struct intel_lvds_encoder, base.base);
  63 }
  64
  65 static struct intel_lvds_connector *to_lvds_connector(struct drm_connector *connector)
  66 {
  67         return container_of(connector, struct intel_lvds_connector, base.base);
  68 }
  69
  70 static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
  71                                     enum pipe *pipe)
  72 {
  73         struct drm_device *dev = encoder->base.dev;
  74         struct drm_i915_private *dev_priv = dev->dev_private;
  75         struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
  76         u32 tmp;
  77
  78         tmp = I915_READ(lvds_encoder->reg);
  79
  80         if (!(tmp & LVDS_PORT_EN))
  81                 return false;
  82
  83         if (HAS_PCH_CPT(dev))
  84                 *pipe = PORT_TO_PIPE_CPT(tmp);
  85         else
  86                 *pipe = PORT_TO_PIPE(tmp);
  87
  88         return true;
  89 }
  90
  91 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
  92  * This is an exception to the general rule that mode_set doesn't turn
  93  * things on.
  94  */
  95 static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
  96 {
  97         struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
  98         struct drm_device *dev = encoder->base.dev;
  99         struct drm_i915_private *dev_priv = dev->dev_private;
 100         struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 101         struct drm_display_mode *fixed_mode =
 102                 lvds_encoder->attached_connector->base.panel.fixed_mode;
 103         int pipe = intel_crtc->pipe;
 104         u32 temp;
 105
 106         temp = I915_READ(lvds_encoder->reg);
 107         temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
 108
 109         if (HAS_PCH_CPT(dev)) {
 110                 temp &= ~PORT_TRANS_SEL_MASK;
 111                 temp |= PORT_TRANS_SEL_CPT(pipe);
 112         } else {
 113                 if (pipe == 1) {
 114                         temp |= LVDS_PIPEB_SELECT;
 115                 } else {
 116                         temp &= ~LVDS_PIPEB_SELECT;
 117                 }
 118         }
 119
 120         /* set the corresponsding LVDS_BORDER bit */
 121         temp |= dev_priv->lvds_border_bits;
 122         /* Set the B0-B3 data pairs corresponding to whether we're going to
 123          * set the DPLLs for dual-channel mode or not.
 124          */
 125         if (lvds_encoder->is_dual_link)
 126                 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
 127         else
 128                 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
 129
 130         /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
 131          * appropriately here, but we need to look more thoroughly into how
 132          * panels behave in the two modes.
 133          */
 134
 135         /* Set the dithering flag on LVDS as needed, note that there is no
 136          * special lvds dither control bit on pch-split platforms, dithering is
 137          * only controlled through the PIPECONF reg. */
 138         if (INTEL_INFO(dev)->gen == 4) {
 139                 if (dev_priv->lvds_dither)
 140                         temp |= LVDS_ENABLE_DITHER;
 141                 else
 142                         temp &= ~LVDS_ENABLE_DITHER;
 143         }
 144         temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
 145         if (fixed_mode->flags & DRM_MODE_FLAG_NHSYNC)
 146                 temp |= LVDS_HSYNC_POLARITY;
 147         if (fixed_mode->flags & DRM_MODE_FLAG_NVSYNC)
 148                 temp |= LVDS_VSYNC_POLARITY;
 149
 150         I915_WRITE(lvds_encoder->reg, temp);
 151 }
 152
 153 static void intel_pre_enable_lvds(struct intel_encoder *encoder)
 154 {
 155         struct drm_device *dev = encoder->base.dev;
 156         struct intel_lvds_encoder *enc = to_lvds_encoder(&encoder->base);
 157         struct drm_i915_private *dev_priv = dev->dev_private;
 158
 159         if (HAS_PCH_SPLIT(dev) || !enc->pfit_control)
 160                 return;
 161
 162         /*
 163          * Enable automatic panel scaling so that non-native modes
 164          * fill the screen.  The panel fitter should only be
 165          * adjusted whilst the pipe is disabled, according to
 166          * register description and PRM.
 167          */
 168         DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
 169                       enc->pfit_control,
 170                       enc->pfit_pgm_ratios);
 171
 172         I915_WRITE(PFIT_PGM_RATIOS, enc->pfit_pgm_ratios);
 173         I915_WRITE(PFIT_CONTROL, enc->pfit_control);
 174 }
 175
 176 /**
 177  * Sets the power state for the panel.
 178  */
 179 static void intel_enable_lvds(struct intel_encoder *encoder)
 180 {
 181         struct drm_device *dev = encoder->base.dev;
 182         struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 183         struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 184         struct drm_i915_private *dev_priv = dev->dev_private;
 185         u32 ctl_reg, stat_reg;
 186
 187         if (HAS_PCH_SPLIT(dev)) {
 188                 ctl_reg = PCH_PP_CONTROL;
 189                 stat_reg = PCH_PP_STATUS;
 190         } else {
 191                 ctl_reg = PP_CONTROL;
 192                 stat_reg = PP_STATUS;
 193         }
 194
 195         I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN);
 196
 197         I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
 198         POSTING_READ(lvds_encoder->reg);
 199         if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
 200                 DRM_ERROR("timed out waiting for panel to power on\n");
 201
 202         intel_panel_enable_backlight(dev, intel_crtc->pipe);
 203 }
 204
 205 static void intel_disable_lvds(struct intel_encoder *encoder)
 206 {
 207         struct drm_device *dev = encoder->base.dev;
 208         struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 209         struct drm_i915_private *dev_priv = dev->dev_private;
 210         u32 ctl_reg, stat_reg;
 211
 212         if (HAS_PCH_SPLIT(dev)) {
 213                 ctl_reg = PCH_PP_CONTROL;
 214                 stat_reg = PCH_PP_STATUS;
 215         } else {
 216                 ctl_reg = PP_CONTROL;
 217                 stat_reg = PP_STATUS;
 218         }
 219
 220         intel_panel_disable_backlight(dev);
 221
 222         I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
 223         if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000))
 224                 DRM_ERROR("timed out waiting for panel to power off\n");
 225
 226         I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN);
 227         POSTING_READ(lvds_encoder->reg);
 228 }
 229
 230 static int intel_lvds_mode_valid(struct drm_connector *connector,
 231                                  struct drm_display_mode *mode)
 232 {
 233         struct intel_connector *intel_connector = to_intel_connector(connector);
 234         struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
 235
 236         if (mode->hdisplay > fixed_mode->hdisplay)
 237                 return MODE_PANEL;
 238         if (mode->vdisplay > fixed_mode->vdisplay)
 239                 return MODE_PANEL;
 240
 241         return MODE_OK;
 242 }
 243
 244 static void
 245 centre_horizontally(struct drm_display_mode *mode,
 246                     int width)
 247 {
 248         u32 border, sync_pos, blank_width, sync_width;
 249
 250         /* keep the hsync and hblank widths constant */
 251         sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
 252         blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
 253         sync_pos = (blank_width - sync_width + 1) / 2;
 254
 255         border = (mode->hdisplay - width + 1) / 2;
 256         border += border & 1; /* make the border even */
 257
 258         mode->crtc_hdisplay = width;
 259         mode->crtc_hblank_start = width + border;
 260         mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
 261
 262         mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
 263         mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
 264 }
 265
 266 static void
 267 centre_vertically(struct drm_display_mode *mode,
 268                   int height)
 269 {
 270         u32 border, sync_pos, blank_width, sync_width;
 271
 272         /* keep the vsync and vblank widths constant */
 273         sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
 274         blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
 275         sync_pos = (blank_width - sync_width + 1) / 2;
 276
 277         border = (mode->vdisplay - height + 1) / 2;
 278
 279         mode->crtc_vdisplay = height;
 280         mode->crtc_vblank_start = height + border;
 281         mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
 282
 283         mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
 284         mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
 285 }
 286
 287 static inline u32 panel_fitter_scaling(u32 source, u32 target)
 288 {
 289         /*
 290          * Floating point operation is not supported. So the FACTOR
 291          * is defined, which can avoid the floating point computation
 292          * when calculating the panel ratio.
 293          */
 294 #define ACCURACY 12
 295 #define FACTOR (1 << ACCURACY)
 296         u32 ratio = source * FACTOR / target;
 297         return (FACTOR * ratio + FACTOR/2) / FACTOR;
 298 }
 299
 300 static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 301                                       struct intel_crtc_config *pipe_config)
 302 {
 303         struct drm_device *dev = intel_encoder->base.dev;
 304         struct drm_i915_private *dev_priv = dev->dev_private;
 305         struct intel_lvds_encoder *lvds_encoder =
 306                 to_lvds_encoder(&intel_encoder->base);
 307         struct intel_connector *intel_connector =
 308                 &lvds_encoder->attached_connector->base;
 309         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 310         struct drm_display_mode *mode = &pipe_config->requested_mode;
 311         struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
 312         u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
 313         unsigned int lvds_bpp;
 314         int pipe;
 315
 316         /* Should never happen!! */
 317         if (INTEL_INFO(dev)->gen < 4 && intel_crtc->pipe == 0) {
 318                 DRM_ERROR("Can't support LVDS on pipe A\n");
 319                 return false;
 320         }
 321
 322         if (intel_encoder_check_is_cloned(&lvds_encoder->base))
 323                 return false;
 324
 325         if ((I915_READ(lvds_encoder->reg) & LVDS_A3_POWER_MASK) ==
 326             LVDS_A3_POWER_UP)
 327                 lvds_bpp = 8*3;
 328         else
 329                 lvds_bpp = 6*3;
 330
 331         if (lvds_bpp != pipe_config->pipe_bpp) {
 332                 DRM_DEBUG_KMS("forcing display bpp (was %d) to LVDS (%d)\n",
 333                               pipe_config->pipe_bpp, lvds_bpp);
 334                 pipe_config->pipe_bpp = lvds_bpp;
 335         }
 336         /*
 337          * We have timings from the BIOS for the panel, put them in
 338          * to the adjusted mode.  The CRTC will be set up for this mode,
 339          * with the panel scaling set up to source from the H/VDisplay
 340          * of the original mode.
 341          */
 342         intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
 343                                adjusted_mode);
 344
 345         if (HAS_PCH_SPLIT(dev)) {
 346                 pipe_config->has_pch_encoder = true;
 347
 348                 intel_pch_panel_fitting(dev,
 349                                         intel_connector->panel.fitting_mode,
 350                                         mode, adjusted_mode);
 351                 return true;
 352         }
 353
 354         /* Native modes don't need fitting */
 355         if (adjusted_mode->hdisplay == mode->hdisplay &&
 356             adjusted_mode->vdisplay == mode->vdisplay)
 357                 goto out;
 358
 359         /* 965+ wants fuzzy fitting */
 360         if (INTEL_INFO(dev)->gen >= 4)
 361                 pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
 362                                  PFIT_FILTER_FUZZY);
 363
 364         /*
 365          * Enable automatic panel scaling for non-native modes so that they fill
 366          * the screen.  Should be enabled before the pipe is enabled, according
 367          * to register description and PRM.
 368          * Change the value here to see the borders for debugging
 369          */
 370         for_each_pipe(pipe)
 371                 I915_WRITE(BCLRPAT(pipe), 0);
 372
 373         drm_mode_set_crtcinfo(adjusted_mode, 0);
 374         pipe_config->timings_set = true;
 375
 376         switch (intel_connector->panel.fitting_mode) {
 377         case DRM_MODE_SCALE_CENTER:
 378                 /*
 379                  * For centered modes, we have to calculate border widths &
 380                  * heights and modify the values programmed into the CRTC.
 381                  */
 382                 centre_horizontally(adjusted_mode, mode->hdisplay);
 383                 centre_vertically(adjusted_mode, mode->vdisplay);
 384                 border = LVDS_BORDER_ENABLE;
 385                 break;
 386
 387         case DRM_MODE_SCALE_ASPECT:
 388                 /* Scale but preserve the aspect ratio */
 389                 if (INTEL_INFO(dev)->gen >= 4) {
 390                         u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
 391                         u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
 392
 393                         /* 965+ is easy, it does everything in hw */
 394                         if (scaled_width > scaled_height)
 395                                 pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR;
 396                         else if (scaled_width < scaled_height)
 397                                 pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER;
 398                         else if (adjusted_mode->hdisplay != mode->hdisplay)
 399                                 pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
 400                 } else {
 401                         u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
 402                         u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
 403                         /*
 404                          * For earlier chips we have to calculate the scaling
 405                          * ratio by hand and program it into the
 406                          * PFIT_PGM_RATIO register
 407                          */
 408                         if (scaled_width > scaled_height) { /* pillar */
 409                                 centre_horizontally(adjusted_mode, scaled_height / mode->vdisplay);
 410
 411                                 border = LVDS_BORDER_ENABLE;
 412                                 if (mode->vdisplay != adjusted_mode->vdisplay) {
 413                                         u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
 414                                         pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
 415                                                             bits << PFIT_VERT_SCALE_SHIFT);
 416                                         pfit_control |= (PFIT_ENABLE |
 417                                                          VERT_INTERP_BILINEAR |
 418                                                          HORIZ_INTERP_BILINEAR);
 419                                 }
 420                         } else if (scaled_width < scaled_height) { /* letter */
 421                                 centre_vertically(adjusted_mode, scaled_width / mode->hdisplay);
 422
 423                                 border = LVDS_BORDER_ENABLE;
 424                                 if (mode->hdisplay != adjusted_mode->hdisplay) {
 425                                         u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
 426                                         pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
 427                                                             bits << PFIT_VERT_SCALE_SHIFT);
 428                                         pfit_control |= (PFIT_ENABLE |
 429                                                          VERT_INTERP_BILINEAR |
 430                                                          HORIZ_INTERP_BILINEAR);
 431                                 }
 432                         } else
 433                                 /* Aspects match, Let hw scale both directions */
 434                                 pfit_control |= (PFIT_ENABLE |
 435                                                  VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
 436                                                  VERT_INTERP_BILINEAR |
 437                                                  HORIZ_INTERP_BILINEAR);
 438                 }
 439                 break;
 440
 441         case DRM_MODE_SCALE_FULLSCREEN:
 442                 /*
 443                  * Full scaling, even if it changes the aspect ratio.
 444                  * Fortunately this is all done for us in hw.
 445                  */
 446                 if (mode->vdisplay != adjusted_mode->vdisplay ||
 447                     mode->hdisplay != adjusted_mode->hdisplay) {
 448                         pfit_control |= PFIT_ENABLE;
 449                         if (INTEL_INFO(dev)->gen >= 4)
 450                                 pfit_control |= PFIT_SCALING_AUTO;
 451                         else
 452                                 pfit_control |= (VERT_AUTO_SCALE |
 453                                                  VERT_INTERP_BILINEAR |
 454                                                  HORIZ_AUTO_SCALE |
 455                                                  HORIZ_INTERP_BILINEAR);
 456                 }
 457                 break;
 458
 459         default:
 460                 break;
 461         }
 462
 463 out:
 464         /* If not enabling scaling, be consistent and always use 0. */
 465         if ((pfit_control & PFIT_ENABLE) == 0) {
 466                 pfit_control = 0;
 467                 pfit_pgm_ratios = 0;
 468         }
 469
 470         /* Make sure pre-965 set dither correctly */
 471         if (INTEL_INFO(dev)->gen < 4 && dev_priv->lvds_dither)
 472                 pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 473
 474         if (pfit_control != lvds_encoder->pfit_control ||
 475             pfit_pgm_ratios != lvds_encoder->pfit_pgm_ratios) {
 476                 lvds_encoder->pfit_control = pfit_control;
 477                 lvds_encoder->pfit_pgm_ratios = pfit_pgm_ratios;
 478         }
 479         dev_priv->lvds_border_bits = border;
 480
 481         /*
 482          * XXX: It would be nice to support lower refresh rates on the
 483          * panels to reduce power consumption, and perhaps match the
 484          * user's requested refresh rate.
 485          */
 486
 487         return true;
 488 }
 489
 490 static void intel_lvds_mode_set(struct drm_encoder *encoder,
 491                                 struct drm_display_mode *mode,
 492                                 struct drm_display_mode *adjusted_mode)
 493 {
 494         /*
 495          * The LVDS pin pair will already have been turned on in the
 496          * intel_crtc_mode_set since it has a large impact on the DPLL
 497          * settings.
 498          */
 499 }
 500
 501 /**
 502  * Detect the LVDS connection.
 503  *
 504  * Since LVDS doesn't have hotlug, we use the lid as a proxy.  Open means
 505  * connected and closed means disconnected.  We also send hotplug events as
 506  * needed, using lid status notification from the input layer.
 507  */
 508 static enum drm_connector_status
 509 intel_lvds_detect(struct drm_connector *connector, bool force)
 510 {
 511         struct drm_device *dev = connector->dev;
 512         enum drm_connector_status status;
 513
 514         status = intel_panel_detect(dev);
 515         if (status != connector_status_unknown)
 516                 return status;
 517
 518         return connector_status_connected;
 519 }
 520
 521 /**
 522  * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
 523  */
 524 static int intel_lvds_get_modes(struct drm_connector *connector)
 525 {
 526         struct intel_lvds_connector *lvds_connector = to_lvds_connector(connector);
 527         struct drm_device *dev = connector->dev;
 528         struct drm_display_mode *mode;
 529
 530         /* use cached edid if we have one */
 531         if (!IS_ERR_OR_NULL(lvds_connector->base.edid))
 532                 return drm_add_edid_modes(connector, lvds_connector->base.edid);
 533
 534         mode = drm_mode_duplicate(dev, lvds_connector->base.panel.fixed_mode);
 535         if (mode == NULL)
 536                 return 0;
 537
 538         drm_mode_probed_add(connector, mode);
 539         return 1;
 540 }
 541
 542 static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
 543 {
 544         DRM_INFO("Skipping forced modeset for %s\n", id->ident);
 545         return 1;
 546 }
 547
 548 /* The GPU hangs up on these systems if modeset is performed on LID open */
 549 static const struct dmi_system_id intel_no_modeset_on_lid[] = {
 550         {
 551                 .callback = intel_no_modeset_on_lid_dmi_callback,
 552                 .ident = "Toshiba Tecra A11",
 553                 .matches = {
 554                         DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 555                         DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
 556                 },
 557         },
 558
 559         { }     /* terminating entry */
 560 };
 561
 562 /*
 563  * Lid events. Note the use of 'modeset':
 564  *  - we set it to MODESET_ON_LID_OPEN on lid close,
 565  *    and set it to MODESET_DONE on open
 566  *  - we use it as a "only once" bit (ie we ignore
 567  *    duplicate events where it was already properly set)
 568  *  - the suspend/resume paths will set it to
 569  *    MODESET_SUSPENDED and ignore the lid open event,
 570  *    because they restore the mode ("lid open").
 571  */
 572 static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 573                             void *unused)
 574 {
 575         struct intel_lvds_connector *lvds_connector =
 576                 container_of(nb, struct intel_lvds_connector, lid_notifier);
 577         struct drm_connector *connector = &lvds_connector->base.base;
 578         struct drm_device *dev = connector->dev;
 579         struct drm_i915_private *dev_priv = dev->dev_private;
 580
 581         if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
 582                 return NOTIFY_OK;
 583
 584         mutex_lock(&dev_priv->modeset_restore_lock);
 585         if (dev_priv->modeset_restore == MODESET_SUSPENDED)
 586                 goto exit;
 587         /*
 588          * check and update the status of LVDS connector after receiving
 589          * the LID nofication event.
 590          */
 591         connector->status = connector->funcs->detect(connector, false);
 592
 593         /* Don't force modeset on machines where it causes a GPU lockup */
 594         if (dmi_check_system(intel_no_modeset_on_lid))
 595                 goto exit;
 596         if (!acpi_lid_open()) {
 597                 /* do modeset on next lid open event */
 598                 dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
 599                 goto exit;
 600         }
 601
 602         if (dev_priv->modeset_restore == MODESET_DONE)
 603                 goto exit;
 604
 605         drm_modeset_lock_all(dev);
 606         intel_modeset_setup_hw_state(dev, true);
 607         drm_modeset_unlock_all(dev);
 608
 609         dev_priv->modeset_restore = MODESET_DONE;
 610
 611 exit:
 612         mutex_unlock(&dev_priv->modeset_restore_lock);
 613         return NOTIFY_OK;
 614 }
 615
 616 /**
 617  * intel_lvds_destroy - unregister and free LVDS structures
 618  * @connector: connector to free
 619  *
 620  * Unregister the DDC bus for this connector then free the driver private
 621  * structure.
 622  */
 623 static void intel_lvds_destroy(struct drm_connector *connector)
 624 {
 625         struct intel_lvds_connector *lvds_connector =
 626                 to_lvds_connector(connector);
 627
 628         if (lvds_connector->lid_notifier.notifier_call)
 629                 acpi_lid_notifier_unregister(&lvds_connector->lid_notifier);
 630
 631         if (!IS_ERR_OR_NULL(lvds_connector->base.edid))
 632                 kfree(lvds_connector->base.edid);
 633
 634         intel_panel_fini(&lvds_connector->base.panel);
 635
 636         drm_sysfs_connector_remove(connector);
 637         drm_connector_cleanup(connector);
 638         kfree(connector);
 639 }
 640
 641 static int intel_lvds_set_property(struct drm_connector *connector,
 642                                    struct drm_property *property,
 643                                    uint64_t value)
 644 {
 645         struct intel_connector *intel_connector = to_intel_connector(connector);
 646         struct drm_device *dev = connector->dev;
 647
 648         if (property == dev->mode_config.scaling_mode_property) {
 649                 struct drm_crtc *crtc;
 650
 651                 if (value == DRM_MODE_SCALE_NONE) {
 652                         DRM_DEBUG_KMS("no scaling not supported\n");
 653                         return -EINVAL;
 654                 }
 655
 656                 if (intel_connector->panel.fitting_mode == value) {
 657                         /* the LVDS scaling property is not changed */
 658                         return 0;
 659                 }
 660                 intel_connector->panel.fitting_mode = value;
 661
 662                 crtc = intel_attached_encoder(connector)->base.crtc;
 663                 if (crtc && crtc->enabled) {
 664                         /*
 665                          * If the CRTC is enabled, the display will be changed
 666                          * according to the new panel fitting mode.
 667                          */
 668                         intel_crtc_restore_mode(crtc);
 669                 }
 670         }
 671
 672         return 0;
 673 }
 674
 675 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
 676         .mode_set = intel_lvds_mode_set,
 677 };
 678
 679 static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
 680         .get_modes = intel_lvds_get_modes,
 681         .mode_valid = intel_lvds_mode_valid,
 682         .best_encoder = intel_best_encoder,
 683 };
 684
 685 static const struct drm_connector_funcs intel_lvds_connector_funcs = {
 686         .dpms = intel_connector_dpms,
 687         .detect = intel_lvds_detect,
 688         .fill_modes = drm_helper_probe_single_connector_modes,
 689         .set_property = intel_lvds_set_property,
 690         .destroy = intel_lvds_destroy,
 691 };
 692
 693 static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
 694         .destroy = intel_encoder_destroy,
 695 };
 696
 697 static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
 698 {
 699         DRM_INFO("Skipping LVDS initialization for %s\n", id->ident);
 700         return 1;
 701 }
 702
 703 /* These systems claim to have LVDS, but really don't */
 704 static const struct dmi_system_id intel_no_lvds[] = {
 705         {
 706                 .callback = intel_no_lvds_dmi_callback,
 707                 .ident = "Apple Mac Mini (Core series)",
 708                 .matches = {
 709                         DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 710                         DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
 711                 },
 712         },
 713         {
 714                 .callback = intel_no_lvds_dmi_callback,
 715                 .ident = "Apple Mac Mini (Core 2 series)",
 716                 .matches = {
 717                         DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 718                         DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
 719                 },
 720         },
 721         {
 722                 .callback = intel_no_lvds_dmi_callback,
 723                 .ident = "MSI IM-945GSE-A",
 724                 .matches = {
 725                         DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
 726                         DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
 727                 },
 728         },
 729         {
 730                 .callback = intel_no_lvds_dmi_callback,
 731                 .ident = "Dell Studio Hybrid",
 732                 .matches = {
 733                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 734                         DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
 735                 },
 736         },
 737         {
 738                 .callback = intel_no_lvds_dmi_callback,
 739                 .ident = "Dell OptiPlex FX170",
 740                 .matches = {
 741                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 742                         DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex FX170"),
 743                 },
 744         },
 745         {
 746                 .callback = intel_no_lvds_dmi_callback,
 747                 .ident = "AOpen Mini PC",
 748                 .matches = {
 749                         DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
 750                         DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
 751                 },
 752         },
 753         {
 754                 .callback = intel_no_lvds_dmi_callback,
 755                 .ident = "AOpen Mini PC MP915",
 756                 .matches = {
 757                         DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
 758                         DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
 759                 },
 760         },
 761         {
 762                 .callback = intel_no_lvds_dmi_callback,
 763                 .ident = "AOpen i915GMm-HFS",
 764                 .matches = {
 765                         DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
 766                         DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
 767                 },
 768         },
 769         {
 770                 .callback = intel_no_lvds_dmi_callback,
 771                 .ident = "AOpen i45GMx-I",
 772                 .matches = {
 773                         DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
 774                         DMI_MATCH(DMI_BOARD_NAME, "i45GMx-I"),
 775                 },
 776         },
 777         {
 778                 .callback = intel_no_lvds_dmi_callback,
 779                 .ident = "Aopen i945GTt-VFA",
 780                 .matches = {
 781                         DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
 782                 },
 783         },
 784         {
 785                 .callback = intel_no_lvds_dmi_callback,
 786                 .ident = "Clientron U800",
 787                 .matches = {
 788                         DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
 789                         DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
 790                 },
 791         },
 792         {
 793                 .callback = intel_no_lvds_dmi_callback,
 794                 .ident = "Clientron E830",
 795                 .matches = {
 796                         DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
 797                         DMI_MATCH(DMI_PRODUCT_NAME, "E830"),
 798                 },
 799         },
 800         {
 801                 .callback = intel_no_lvds_dmi_callback,
 802                 .ident = "Asus EeeBox PC EB1007",
 803                 .matches = {
 804                         DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
 805                         DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
 806                 },
 807         },
 808         {
 809                 .callback = intel_no_lvds_dmi_callback,
 810                 .ident = "Asus AT5NM10T-I",
 811                 .matches = {
 812                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 813                         DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"),
 814                 },
 815         },
 816         {
 817                 .callback = intel_no_lvds_dmi_callback,
 818                 .ident = "Hewlett-Packard HP t5740",
 819                 .matches = {
 820                         DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
 821                         DMI_MATCH(DMI_PRODUCT_NAME, " t5740"),
 822                 },
 823         },
 824         {
 825                 .callback = intel_no_lvds_dmi_callback,
 826                 .ident = "Hewlett-Packard t5745",
 827                 .matches = {
 828                         DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
 829                         DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"),
 830                 },
 831         },
 832         {
 833                 .callback = intel_no_lvds_dmi_callback,
 834                 .ident = "Hewlett-Packard st5747",
 835                 .matches = {
 836                         DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
 837                         DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"),
 838                 },
 839         },
 840         {
 841                 .callback = intel_no_lvds_dmi_callback,
 842                 .ident = "MSI Wind Box DC500",
 843                 .matches = {
 844                         DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
 845                         DMI_MATCH(DMI_BOARD_NAME, "MS-7469"),
 846                 },
 847         },
 848         {
 849                 .callback = intel_no_lvds_dmi_callback,
 850                 .ident = "Gigabyte GA-D525TUD",
 851                 .matches = {
 852                         DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
 853                         DMI_MATCH(DMI_BOARD_NAME, "D525TUD"),
 854                 },
 855         },
 856         {
 857                 .callback = intel_no_lvds_dmi_callback,
 858                 .ident = "Supermicro X7SPA-H",
 859                 .matches = {
 860                         DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
 861                         DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"),
 862                 },
 863         },
 864         {
 865                 .callback = intel_no_lvds_dmi_callback,
 866                 .ident = "Fujitsu Esprimo Q900",
 867                 .matches = {
 868                         DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 869                         DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Q900"),
 870                 },
 871         },
 872
 873         { }     /* terminating entry */
 874 };
 875
 876 /**
 877  * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
 878  * @dev: drm device
 879  * @connector: LVDS connector
 880  *
 881  * Find the reduced downclock for LVDS in EDID.
 882  */
 883 static void intel_find_lvds_downclock(struct drm_device *dev,
 884                                       struct drm_display_mode *fixed_mode,
 885                                       struct drm_connector *connector)
 886 {
 887         struct drm_i915_private *dev_priv = dev->dev_private;
 888         struct drm_display_mode *scan;
 889         int temp_downclock;
 890
 891         temp_downclock = fixed_mode->clock;
 892         list_for_each_entry(scan, &connector->probed_modes, head) {
 893                 /*
 894                  * If one mode has the same resolution with the fixed_panel
 895                  * mode while they have the different refresh rate, it means
 896                  * that the reduced downclock is found for the LVDS. In such
 897                  * case we can set the different FPx0/1 to dynamically select
 898                  * between low and high frequency.
 899                  */
 900                 if (scan->hdisplay == fixed_mode->hdisplay &&
 901                     scan->hsync_start == fixed_mode->hsync_start &&
 902                     scan->hsync_end == fixed_mode->hsync_end &&
 903                     scan->htotal == fixed_mode->htotal &&
 904                     scan->vdisplay == fixed_mode->vdisplay &&
 905                     scan->vsync_start == fixed_mode->vsync_start &&
 906                     scan->vsync_end == fixed_mode->vsync_end &&
 907                     scan->vtotal == fixed_mode->vtotal) {
 908                         if (scan->clock < temp_downclock) {
 909                                 /*
 910                                  * The downclock is already found. But we
 911                                  * expect to find the lower downclock.
 912                                  */
 913                                 temp_downclock = scan->clock;
 914                         }
 915                 }
 916         }
 917         if (temp_downclock < fixed_mode->clock && i915_lvds_downclock) {
 918                 /* We found the downclock for LVDS. */
 919                 dev_priv->lvds_downclock_avail = 1;
 920                 dev_priv->lvds_downclock = temp_downclock;
 921                 DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
 922                               "Normal clock %dKhz, downclock %dKhz\n",
 923                               fixed_mode->clock, temp_downclock);
 924         }
 925 }
 926
 927 /*
 928  * Enumerate the child dev array parsed from VBT to check whether
 929  * the LVDS is present.
 930  * If it is present, return 1.
 931  * If it is not present, return false.
 932  * If no child dev is parsed from VBT, it assumes that the LVDS is present.
 933  */
 934 static bool lvds_is_present_in_vbt(struct drm_device *dev,
 935                                    u8 *i2c_pin)
 936 {
 937         struct drm_i915_private *dev_priv = dev->dev_private;
 938         int i;
 939
 940         if (!dev_priv->child_dev_num)
 941                 return true;
 942
 943         for (i = 0; i < dev_priv->child_dev_num; i++) {
 944                 struct child_device_config *child = dev_priv->child_dev + i;
 945
 946                 /* If the device type is not LFP, continue.
 947                  * We have to check both the new identifiers as well as the
 948                  * old for compatibility with some BIOSes.
 949                  */
 950                 if (child->device_type != DEVICE_TYPE_INT_LFP &&
 951                     child->device_type != DEVICE_TYPE_LFP)
 952                         continue;
 953
 954                 if (intel_gmbus_is_port_valid(child->i2c_pin))
 955                         *i2c_pin = child->i2c_pin;
 956
 957                 /* However, we cannot trust the BIOS writers to populate
 958                  * the VBT correctly.  Since LVDS requires additional
 959                  * information from AIM blocks, a non-zero addin offset is
 960                  * a good indicator that the LVDS is actually present.
 961                  */
 962                 if (child->addin_offset)
 963                         return true;
 964
 965                 /* But even then some BIOS writers perform some black magic
 966                  * and instantiate the device without reference to any
 967                  * additional data.  Trust that if the VBT was written into
 968                  * the OpRegion then they have validated the LVDS's existence.
 969                  */
 970                 if (dev_priv->opregion.vbt)
 971                         return true;
 972         }
 973
 974         return false;
 975 }
 976
 977 static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
 978 {
 979         DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
 980         return 1;
 981 }
 982
 983 static const struct dmi_system_id intel_dual_link_lvds[] = {
 984         {
 985                 .callback = intel_dual_link_lvds_callback,
 986                 .ident = "Apple MacBook Pro (Core i5/i7 Series)",
 987                 .matches = {
 988                         DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
 989                         DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
 990                 },
 991         },
 992         { }     /* terminating entry */
 993 };
 994
 995 bool intel_is_dual_link_lvds(struct drm_device *dev)
 996 {
 997         struct intel_encoder *encoder;
 998         struct intel_lvds_encoder *lvds_encoder;
 999
1000         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
1001                             base.head) {
1002                 if (encoder->type == INTEL_OUTPUT_LVDS) {
1003                         lvds_encoder = to_lvds_encoder(&encoder->base);
1004
1005                         return lvds_encoder->is_dual_link;
1006                 }
1007         }
1008
1009         return false;
1010 }
1011
1012 static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
1013 {
1014         struct drm_device *dev = lvds_encoder->base.base.dev;
1015         unsigned int val;
1016         struct drm_i915_private *dev_priv = dev->dev_private;
1017
1018         /* use the module option value if specified */
1019         if (i915_lvds_channel_mode > 0)
1020                 return i915_lvds_channel_mode == 2;
1021
1022         if (dmi_check_system(intel_dual_link_lvds))
1023                 return true;
1024
1025         /* BIOS should set the proper LVDS register value at boot, but
1026          * in reality, it doesn't set the value when the lid is closed;
1027          * we need to check "the value to be set" in VBT when LVDS
1028          * register is uninitialized.
1029          */
1030         val = I915_READ(lvds_encoder->reg);
1031         if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
1032                 val = dev_priv->bios_lvds_val;
1033
1034         return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
1035 }
1036
1037 static bool intel_lvds_supported(struct drm_device *dev)
1038 {
1039         /* With the introduction of the PCH we gained a dedicated
1040          * LVDS presence pin, use it. */
1041         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
1042                 return true;
1043
1044         /* Otherwise LVDS was only attached to mobile products,
1045          * except for the inglorious 830gm */
1046         if (INTEL_INFO(dev)->gen <= 4 && IS_MOBILE(dev) && !IS_I830(dev))
1047                 return true;
1048
1049         return false;
1050 }
1051
1052 /**
1053  * intel_lvds_init - setup LVDS connectors on this device
1054  * @dev: drm device
1055  *
1056  * Create the connector, register the LVDS DDC bus, and try to figure out what
1057  * modes we can display on the LVDS panel (if present).
1058  */
1059 bool intel_lvds_init(struct drm_device *dev)
1060 {
1061         struct drm_i915_private *dev_priv = dev->dev_private;
1062         struct intel_lvds_encoder *lvds_encoder;
1063         struct intel_encoder *intel_encoder;
1064         struct intel_lvds_connector *lvds_connector;
1065         struct intel_connector *intel_connector;
1066         struct drm_connector *connector;
1067         struct drm_encoder *encoder;
1068         struct drm_display_mode *scan; /* *modes, *bios_mode; */
1069         struct drm_display_mode *fixed_mode = NULL;
1070         struct edid *edid;
1071         struct drm_crtc *crtc;
1072         u32 lvds;
1073         int pipe;
1074         u8 pin;
1075
1076         if (!intel_lvds_supported(dev))
1077                 return false;
1078
1079         /* Skip init on machines we know falsely report LVDS */
1080         if (dmi_check_system(intel_no_lvds))
1081                 return false;
1082
1083         pin = GMBUS_PORT_PANEL;
1084         if (!lvds_is_present_in_vbt(dev, &pin)) {
1085                 DRM_DEBUG_KMS("LVDS is not present in VBT\n");
1086                 return false;
1087         }
1088
1089         if (HAS_PCH_SPLIT(dev)) {
1090                 if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
1091                         return false;
1092                 if (dev_priv->edp.support) {
1093                         DRM_DEBUG_KMS("disable LVDS for eDP support\n");
1094                         return false;
1095                 }
1096         }
1097
1098         lvds_encoder = kzalloc(sizeof(struct intel_lvds_encoder), GFP_KERNEL);
1099         if (!lvds_encoder)
1100                 return false;
1101
1102         lvds_connector = kzalloc(sizeof(struct intel_lvds_connector), GFP_KERNEL);
1103         if (!lvds_connector) {
1104                 kfree(lvds_encoder);
1105                 return false;
1106         }
1107
1108         lvds_encoder->attached_connector = lvds_connector;
1109
1110         if (!HAS_PCH_SPLIT(dev)) {
1111                 lvds_encoder->pfit_control = I915_READ(PFIT_CONTROL);
1112         }
1113
1114         intel_encoder = &lvds_encoder->base;
1115         encoder = &intel_encoder->base;
1116         intel_connector = &lvds_connector->base;
1117         connector = &intel_connector->base;
1118         drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
1119                            DRM_MODE_CONNECTOR_LVDS);
1120
1121         drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs,
1122                          DRM_MODE_ENCODER_LVDS);
1123
1124         intel_encoder->enable = intel_enable_lvds;
1125         intel_encoder->pre_enable = intel_pre_enable_lvds;
1126         intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
1127         intel_encoder->compute_config = intel_lvds_compute_config;
1128         intel_encoder->disable = intel_disable_lvds;
1129         intel_encoder->get_hw_state = intel_lvds_get_hw_state;
1130         intel_connector->get_hw_state = intel_connector_get_hw_state;
1131
1132         intel_connector_attach_encoder(intel_connector, intel_encoder);
1133         intel_encoder->type = INTEL_OUTPUT_LVDS;
1134
1135         intel_encoder->cloneable = false;
1136         if (HAS_PCH_SPLIT(dev))
1137                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
1138         else if (IS_GEN4(dev))
1139                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
1140         else
1141                 intel_encoder->crtc_mask = (1 << 1);
1142
1143         drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
1144         drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
1145         connector->display_info.subpixel_order = SubPixelHorizontalRGB;
1146         connector->interlace_allowed = false;
1147         connector->doublescan_allowed = false;
1148
1149         if (HAS_PCH_SPLIT(dev)) {
1150                 lvds_encoder->reg = PCH_LVDS;
1151         } else {
1152                 lvds_encoder->reg = LVDS;
1153         }
1154
1155         /* create the scaling mode property */
1156         drm_mode_create_scaling_mode_property(dev);
1157         drm_object_attach_property(&connector->base,
1158                                       dev->mode_config.scaling_mode_property,
1159                                       DRM_MODE_SCALE_ASPECT);
1160         intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
1161         /*
1162          * LVDS discovery:
1163          * 1) check for EDID on DDC
1164          * 2) check for VBT data
1165          * 3) check to see if LVDS is already on
1166          *    if none of the above, no panel
1167          * 4) make sure lid is open
1168          *    if closed, act like it's not there for now
1169          */
1170
1171         /*
1172          * Attempt to get the fixed panel mode from DDC.  Assume that the
1173          * preferred mode is the right one.
1174          */
1175         edid = drm_get_edid(connector, intel_gmbus_get_adapter(dev_priv, pin));
1176         if (edid) {
1177                 if (drm_add_edid_modes(connector, edid)) {
1178                         drm_mode_connector_update_edid_property(connector,
1179                                                                 edid);
1180                 } else {
1181                         kfree(edid);
1182                         edid = ERR_PTR(-EINVAL);
1183                 }
1184         } else {
1185                 edid = ERR_PTR(-ENOENT);
1186         }
1187         lvds_connector->base.edid = edid;
1188
1189         if (IS_ERR_OR_NULL(edid)) {
1190                 /* Didn't get an EDID, so
1191                  * Set wide sync ranges so we get all modes
1192                  * handed to valid_mode for checking
1193                  */
1194                 connector->display_info.min_vfreq = 0;
1195                 connector->display_info.max_vfreq = 200;
1196                 connector->display_info.min_hfreq = 0;
1197                 connector->display_info.max_hfreq = 200;
1198         }
1199
1200         list_for_each_entry(scan, &connector->probed_modes, head) {
1201                 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
1202                         DRM_DEBUG_KMS("using preferred mode from EDID: ");
1203                         drm_mode_debug_printmodeline(scan);
1204
1205                         fixed_mode = drm_mode_duplicate(dev, scan);
1206                         if (fixed_mode) {
1207                                 intel_find_lvds_downclock(dev, fixed_mode,
1208                                                           connector);
1209                                 goto out;
1210                         }
1211                 }
1212         }
1213
1214         /* Failed to get EDID, what about VBT? */
1215         if (dev_priv->lfp_lvds_vbt_mode) {
1216                 DRM_DEBUG_KMS("using mode from VBT: ");
1217                 drm_mode_debug_printmodeline(dev_priv->lfp_lvds_vbt_mode);
1218
1219                 fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
1220                 if (fixed_mode) {
1221                         fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
1222                         goto out;
1223                 }
1224         }
1225
1226         /*
1227          * If we didn't get EDID, try checking if the panel is already turned
1228          * on.  If so, assume that whatever is currently programmed is the
1229          * correct mode.
1230          */
1231
1232         /* Ironlake: FIXME if still fail, not try pipe mode now */
1233         if (HAS_PCH_SPLIT(dev))
1234                 goto failed;
1235
1236         lvds = I915_READ(LVDS);
1237         pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
1238         crtc = intel_get_crtc_for_pipe(dev, pipe);
1239
1240         if (crtc && (lvds & LVDS_PORT_EN)) {
1241                 fixed_mode = intel_crtc_mode_get(dev, crtc);
1242                 if (fixed_mode) {
1243                         DRM_DEBUG_KMS("using current (BIOS) mode: ");
1244                         drm_mode_debug_printmodeline(fixed_mode);
1245                         fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
1246                         goto out;
1247                 }
1248         }
1249
1250         /* If we still don't have a mode after all that, give up. */
1251         if (!fixed_mode)
1252                 goto failed;
1253
1254 out:
1255         lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
1256         DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
1257                       lvds_encoder->is_dual_link ? "dual" : "single");
1258
1259         /*
1260          * Unlock registers and just
1261          * leave them unlocked
1262          */
1263         if (HAS_PCH_SPLIT(dev)) {
1264                 I915_WRITE(PCH_PP_CONTROL,
1265                            I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
1266         } else {
1267                 I915_WRITE(PP_CONTROL,
1268                            I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
1269         }
1270         lvds_connector->lid_notifier.notifier_call = intel_lid_notify;
1271         if (acpi_lid_notifier_register(&lvds_connector->lid_notifier)) {
1272                 DRM_DEBUG_KMS("lid notifier registration failed\n");
1273                 lvds_connector->lid_notifier.notifier_call = NULL;
1274         }
1275         drm_sysfs_connector_add(connector);
1276
1277         intel_panel_init(&intel_connector->panel, fixed_mode);
1278         intel_panel_setup_backlight(connector);
1279
1280         return true;
1281
1282 failed:
1283         DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
1284         drm_connector_cleanup(connector);
1285         drm_encoder_cleanup(encoder);
1286         if (fixed_mode)
1287                 drm_mode_destroy(dev, fixed_mode);
1288         kfree(lvds_encoder);
1289         kfree(lvds_connector);
1290         return false;
1291 }