]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h
drivers: usb: removed assignment of 0 to static variables
[karo-tx-linux.git] / drivers / net / wireless / intel / iwlwifi / iwl-fw-file.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
10  * Copyright(c) 2016        Intel Deutschland GmbH
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of version 2 of the GNU General Public License as
14  * published by the Free Software Foundation.
15  *
16  * This program is distributed in the hope that it will be useful, but
17  * WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
19  * General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
24  * USA
25  *
26  * The full GNU General Public License is included in this distribution
27  * in the file called COPYING.
28  *
29  * Contact Information:
30  *  Intel Linux Wireless <linuxwifi@intel.com>
31  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
32  *
33  * BSD LICENSE
34  *
35  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
36  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
37  * Copyright(c) 2016        Intel Deutschland GmbH
38  * All rights reserved.
39  *
40  * Redistribution and use in source and binary forms, with or without
41  * modification, are permitted provided that the following conditions
42  * are met:
43  *
44  *  * Redistributions of source code must retain the above copyright
45  *    notice, this list of conditions and the following disclaimer.
46  *  * Redistributions in binary form must reproduce the above copyright
47  *    notice, this list of conditions and the following disclaimer in
48  *    the documentation and/or other materials provided with the
49  *    distribution.
50  *  * Neither the name Intel Corporation nor the names of its
51  *    contributors may be used to endorse or promote products derived
52  *    from this software without specific prior written permission.
53  *
54  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
55  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
56  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
57  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
58  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
59  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
60  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
61  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
62  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
63  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
64  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
65  *****************************************************************************/
66
67 #ifndef __iwl_fw_file_h__
68 #define __iwl_fw_file_h__
69
70 #include <linux/netdevice.h>
71 #include <linux/nl80211.h>
72
73 /* v1/v2 uCode file layout */
74 struct iwl_ucode_header {
75         __le32 ver;     /* major/minor/API/serial */
76         union {
77                 struct {
78                         __le32 inst_size;       /* bytes of runtime code */
79                         __le32 data_size;       /* bytes of runtime data */
80                         __le32 init_size;       /* bytes of init code */
81                         __le32 init_data_size;  /* bytes of init data */
82                         __le32 boot_size;       /* bytes of bootstrap code */
83                         u8 data[0];             /* in same order as sizes */
84                 } v1;
85                 struct {
86                         __le32 build;           /* build number */
87                         __le32 inst_size;       /* bytes of runtime code */
88                         __le32 data_size;       /* bytes of runtime data */
89                         __le32 init_size;       /* bytes of init code */
90                         __le32 init_data_size;  /* bytes of init data */
91                         __le32 boot_size;       /* bytes of bootstrap code */
92                         u8 data[0];             /* in same order as sizes */
93                 } v2;
94         } u;
95 };
96
97 /*
98  * new TLV uCode file layout
99  *
100  * The new TLV file format contains TLVs, that each specify
101  * some piece of data.
102  */
103
104 enum iwl_ucode_tlv_type {
105         IWL_UCODE_TLV_INVALID           = 0, /* unused */
106         IWL_UCODE_TLV_INST              = 1,
107         IWL_UCODE_TLV_DATA              = 2,
108         IWL_UCODE_TLV_INIT              = 3,
109         IWL_UCODE_TLV_INIT_DATA         = 4,
110         IWL_UCODE_TLV_BOOT              = 5,
111         IWL_UCODE_TLV_PROBE_MAX_LEN     = 6, /* a u32 value */
112         IWL_UCODE_TLV_PAN               = 7,
113         IWL_UCODE_TLV_RUNT_EVTLOG_PTR   = 8,
114         IWL_UCODE_TLV_RUNT_EVTLOG_SIZE  = 9,
115         IWL_UCODE_TLV_RUNT_ERRLOG_PTR   = 10,
116         IWL_UCODE_TLV_INIT_EVTLOG_PTR   = 11,
117         IWL_UCODE_TLV_INIT_EVTLOG_SIZE  = 12,
118         IWL_UCODE_TLV_INIT_ERRLOG_PTR   = 13,
119         IWL_UCODE_TLV_ENHANCE_SENS_TBL  = 14,
120         IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
121         IWL_UCODE_TLV_WOWLAN_INST       = 16,
122         IWL_UCODE_TLV_WOWLAN_DATA       = 17,
123         IWL_UCODE_TLV_FLAGS             = 18,
124         IWL_UCODE_TLV_SEC_RT            = 19,
125         IWL_UCODE_TLV_SEC_INIT          = 20,
126         IWL_UCODE_TLV_SEC_WOWLAN        = 21,
127         IWL_UCODE_TLV_DEF_CALIB         = 22,
128         IWL_UCODE_TLV_PHY_SKU           = 23,
129         IWL_UCODE_TLV_SECURE_SEC_RT     = 24,
130         IWL_UCODE_TLV_SECURE_SEC_INIT   = 25,
131         IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
132         IWL_UCODE_TLV_NUM_OF_CPU        = 27,
133         IWL_UCODE_TLV_CSCHEME           = 28,
134         IWL_UCODE_TLV_API_CHANGES_SET   = 29,
135         IWL_UCODE_TLV_ENABLED_CAPABILITIES      = 30,
136         IWL_UCODE_TLV_N_SCAN_CHANNELS           = 31,
137         IWL_UCODE_TLV_PAGING            = 32,
138         IWL_UCODE_TLV_SEC_RT_USNIFFER   = 34,
139         IWL_UCODE_TLV_SDIO_ADMA_ADDR    = 35,
140         IWL_UCODE_TLV_FW_VERSION        = 36,
141         IWL_UCODE_TLV_FW_DBG_DEST       = 38,
142         IWL_UCODE_TLV_FW_DBG_CONF       = 39,
143         IWL_UCODE_TLV_FW_DBG_TRIGGER    = 40,
144         IWL_UCODE_TLV_FW_GSCAN_CAPA     = 50,
145 };
146
147 struct iwl_ucode_tlv {
148         __le32 type;            /* see above */
149         __le32 length;          /* not including type/length fields */
150         u8 data[0];
151 };
152
153 #define IWL_TLV_UCODE_MAGIC             0x0a4c5749
154 #define FW_VER_HUMAN_READABLE_SZ        64
155
156 struct iwl_tlv_ucode_header {
157         /*
158          * The TLV style ucode header is distinguished from
159          * the v1/v2 style header by first four bytes being
160          * zero, as such is an invalid combination of
161          * major/minor/API/serial versions.
162          */
163         __le32 zero;
164         __le32 magic;
165         u8 human_readable[FW_VER_HUMAN_READABLE_SZ];
166         /* major/minor/API/serial or major in new format */
167         __le32 ver;
168         __le32 build;
169         __le64 ignore;
170         /*
171          * The data contained herein has a TLV layout,
172          * see above for the TLV header and types.
173          * Note that each TLV is padded to a length
174          * that is a multiple of 4 for alignment.
175          */
176         u8 data[0];
177 };
178
179 /*
180  * ucode TLVs
181  *
182  * ability to get extension for: flags & capabilities from ucode binaries files
183  */
184 struct iwl_ucode_api {
185         __le32 api_index;
186         __le32 api_flags;
187 } __packed;
188
189 struct iwl_ucode_capa {
190         __le32 api_index;
191         __le32 api_capa;
192 } __packed;
193
194 /**
195  * enum iwl_ucode_tlv_flag - ucode API flags
196  * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
197  *      was a separate TLV but moved here to save space.
198  * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID,
199  *      treats good CRC threshold as a boolean
200  * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
201  * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
202  * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
203  * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
204  * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
205  *      offload profile config command.
206  * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
207  *      (rather than two) IPv6 addresses
208  * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
209  *      from the probe request template.
210  * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
211  * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
212  * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
213  * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
214  *      P2P client interfaces simultaneously if they are in different bindings.
215  * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
216  *      P2P client interfaces simultaneously if they are in same bindings.
217  * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
218  * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
219  * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
220  * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
221  * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
222  */
223 enum iwl_ucode_tlv_flag {
224         IWL_UCODE_TLV_FLAGS_PAN                 = BIT(0),
225         IWL_UCODE_TLV_FLAGS_NEWSCAN             = BIT(1),
226         IWL_UCODE_TLV_FLAGS_MFP                 = BIT(2),
227         IWL_UCODE_TLV_FLAGS_P2P                 = BIT(3),
228         IWL_UCODE_TLV_FLAGS_DW_BC_TABLE         = BIT(4),
229         IWL_UCODE_TLV_FLAGS_SHORT_BL            = BIT(7),
230         IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS     = BIT(10),
231         IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID       = BIT(12),
232         IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL    = BIT(15),
233         IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE    = BIT(16),
234         IWL_UCODE_TLV_FLAGS_P2P_PM              = BIT(21),
235         IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM      = BIT(22),
236         IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM      = BIT(23),
237         IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT       = BIT(24),
238         IWL_UCODE_TLV_FLAGS_EBS_SUPPORT         = BIT(25),
239         IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD        = BIT(26),
240         IWL_UCODE_TLV_FLAGS_BCAST_FILTERING     = BIT(29),
241         IWL_UCODE_TLV_FLAGS_GO_UAPSD            = BIT(30),
242 };
243
244 typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t;
245
246 /**
247  * enum iwl_ucode_tlv_api - ucode api
248  * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
249  * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
250  *      longer than the passive one, which is essential for fragmented scan.
251  * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
252  * @IWL_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header
253  * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
254  * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
255  * @IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority
256  *      instead of 3.
257  * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size
258  *      (command version 3) that supports per-chain limits
259  *
260  * @NUM_IWL_UCODE_TLV_API: number of bits used
261  */
262 enum iwl_ucode_tlv_api {
263         IWL_UCODE_TLV_API_BT_COEX_SPLIT         = (__force iwl_ucode_tlv_api_t)3,
264         IWL_UCODE_TLV_API_FRAGMENTED_SCAN       = (__force iwl_ucode_tlv_api_t)8,
265         IWL_UCODE_TLV_API_WIFI_MCC_UPDATE       = (__force iwl_ucode_tlv_api_t)9,
266         IWL_UCODE_TLV_API_WIDE_CMD_HDR          = (__force iwl_ucode_tlv_api_t)14,
267         IWL_UCODE_TLV_API_LQ_SS_PARAMS          = (__force iwl_ucode_tlv_api_t)18,
268         IWL_UCODE_TLV_API_NEW_VERSION           = (__force iwl_ucode_tlv_api_t)20,
269         IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY     = (__force iwl_ucode_tlv_api_t)24,
270         IWL_UCODE_TLV_API_TX_POWER_CHAIN        = (__force iwl_ucode_tlv_api_t)27,
271
272         NUM_IWL_UCODE_TLV_API
273 #ifdef __CHECKER__
274                 /* sparse says it cannot increment the previous enum member */
275                 = 128
276 #endif
277 };
278
279 typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t;
280
281 /**
282  * enum iwl_ucode_tlv_capa - ucode capabilities
283  * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
284  * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
285  * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
286  * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
287  * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
288  * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
289  * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
290  *      tx power value into TPC Report action frame and Link Measurement Report
291  *      action frame
292  * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
293  *      channel in DS parameter set element in probe requests.
294  * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
295  *      probe requests.
296  * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
297  * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
298  *      which also implies support for the scheduler configuration command
299  * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
300  * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
301  * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
302  * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
303  * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
304  * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
305  * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
306  *      sources for the MCC. This TLV bit is a future replacement to
307  *      IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
308  *      is supported.
309  * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
310  * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
311  * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
312  * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
313  * @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT
314  * @IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what
315  *      antenna the beacon should be transmitted
316  * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2
317  *
318  * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
319  */
320 enum iwl_ucode_tlv_capa {
321         IWL_UCODE_TLV_CAPA_D0I3_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)0,
322         IWL_UCODE_TLV_CAPA_LAR_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)1,
323         IWL_UCODE_TLV_CAPA_UMAC_SCAN                    = (__force iwl_ucode_tlv_capa_t)2,
324         IWL_UCODE_TLV_CAPA_BEAMFORMER                   = (__force iwl_ucode_tlv_capa_t)3,
325         IWL_UCODE_TLV_CAPA_TOF_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)5,
326         IWL_UCODE_TLV_CAPA_TDLS_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)6,
327         IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT    = (__force iwl_ucode_tlv_capa_t)8,
328         IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT      = (__force iwl_ucode_tlv_capa_t)9,
329         IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT       = (__force iwl_ucode_tlv_capa_t)10,
330         IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT         = (__force iwl_ucode_tlv_capa_t)11,
331         IWL_UCODE_TLV_CAPA_DQA_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)12,
332         IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH          = (__force iwl_ucode_tlv_capa_t)13,
333         IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT              = (__force iwl_ucode_tlv_capa_t)18,
334         IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT         = (__force iwl_ucode_tlv_capa_t)19,
335         IWL_UCODE_TLV_CAPA_CSUM_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)21,
336         IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS           = (__force iwl_ucode_tlv_capa_t)22,
337         IWL_UCODE_TLV_CAPA_BT_COEX_PLCR                 = (__force iwl_ucode_tlv_capa_t)28,
338         IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC                = (__force iwl_ucode_tlv_capa_t)29,
339         IWL_UCODE_TLV_CAPA_BT_COEX_RRC                  = (__force iwl_ucode_tlv_capa_t)30,
340         IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT                = (__force iwl_ucode_tlv_capa_t)31,
341         IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE         = (__force iwl_ucode_tlv_capa_t)64,
342         IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS            = (__force iwl_ucode_tlv_capa_t)65,
343         IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT             = (__force iwl_ucode_tlv_capa_t)67,
344         IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION         = (__force iwl_ucode_tlv_capa_t)71,
345         IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2               = (__force iwl_ucode_tlv_capa_t)73,
346
347         NUM_IWL_UCODE_TLV_CAPA
348 #ifdef __CHECKER__
349                 /* sparse says it cannot increment the previous enum member */
350                 = 128
351 #endif
352 };
353
354 /* The default calibrate table size if not specified by firmware file */
355 #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE     18
356 #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE         19
357 #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE                  253
358
359 /* The default max probe length if not specified by the firmware file */
360 #define IWL_DEFAULT_MAX_PROBE_LENGTH    200
361
362 /*
363  * For 16.0 uCode and above, there is no differentiation between sections,
364  * just an offset to the HW address.
365  */
366 #define IWL_UCODE_SECTION_MAX 16
367 #define CPU1_CPU2_SEPARATOR_SECTION     0xFFFFCCCC
368 #define PAGING_SEPARATOR_SECTION        0xAAAABBBB
369
370 /* uCode version contains 4 values: Major/Minor/API/Serial */
371 #define IWL_UCODE_MAJOR(ver)    (((ver) & 0xFF000000) >> 24)
372 #define IWL_UCODE_MINOR(ver)    (((ver) & 0x00FF0000) >> 16)
373 #define IWL_UCODE_API(ver)      (((ver) & 0x0000FF00) >> 8)
374 #define IWL_UCODE_SERIAL(ver)   ((ver) & 0x000000FF)
375
376 /*
377  * Calibration control struct.
378  * Sent as part of the phy configuration command.
379  * @flow_trigger: bitmap for which calibrations to perform according to
380  *              flow triggers.
381  * @event_trigger: bitmap for which calibrations to perform according to
382  *              event triggers.
383  */
384 struct iwl_tlv_calib_ctrl {
385         __le32 flow_trigger;
386         __le32 event_trigger;
387 } __packed;
388
389 enum iwl_fw_phy_cfg {
390         FW_PHY_CFG_RADIO_TYPE_POS = 0,
391         FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
392         FW_PHY_CFG_RADIO_STEP_POS = 2,
393         FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
394         FW_PHY_CFG_RADIO_DASH_POS = 4,
395         FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
396         FW_PHY_CFG_TX_CHAIN_POS = 16,
397         FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
398         FW_PHY_CFG_RX_CHAIN_POS = 20,
399         FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
400 };
401
402 #define IWL_UCODE_MAX_CS                1
403
404 /**
405  * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
406  * @cipher: a cipher suite selector
407  * @flags: cipher scheme flags (currently reserved for a future use)
408  * @hdr_len: a size of MPDU security header
409  * @pn_len: a size of PN
410  * @pn_off: an offset of pn from the beginning of the security header
411  * @key_idx_off: an offset of key index byte in the security header
412  * @key_idx_mask: a bit mask of key_idx bits
413  * @key_idx_shift: bit shift needed to get key_idx
414  * @mic_len: mic length in bytes
415  * @hw_cipher: a HW cipher index used in host commands
416  */
417 struct iwl_fw_cipher_scheme {
418         __le32 cipher;
419         u8 flags;
420         u8 hdr_len;
421         u8 pn_len;
422         u8 pn_off;
423         u8 key_idx_off;
424         u8 key_idx_mask;
425         u8 key_idx_shift;
426         u8 mic_len;
427         u8 hw_cipher;
428 } __packed;
429
430 enum iwl_fw_dbg_reg_operator {
431         CSR_ASSIGN,
432         CSR_SETBIT,
433         CSR_CLEARBIT,
434
435         PRPH_ASSIGN,
436         PRPH_SETBIT,
437         PRPH_CLEARBIT,
438
439         INDIRECT_ASSIGN,
440         INDIRECT_SETBIT,
441         INDIRECT_CLEARBIT,
442
443         PRPH_BLOCKBIT,
444 };
445
446 /**
447  * struct iwl_fw_dbg_reg_op - an operation on a register
448  *
449  * @op: %enum iwl_fw_dbg_reg_operator
450  * @addr: offset of the register
451  * @val: value
452  */
453 struct iwl_fw_dbg_reg_op {
454         u8 op;
455         u8 reserved[3];
456         __le32 addr;
457         __le32 val;
458 } __packed;
459
460 /**
461  * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
462  *
463  * @SMEM_MODE: monitor stores the data in SMEM
464  * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
465  * @MARBH_MODE: monitor stores the data in MARBH buffer
466  * @MIPI_MODE: monitor outputs the data through the MIPI interface
467  */
468 enum iwl_fw_dbg_monitor_mode {
469         SMEM_MODE = 0,
470         EXTERNAL_MODE = 1,
471         MARBH_MODE = 2,
472         MIPI_MODE = 3,
473 };
474
475 /**
476  * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data
477  *
478  * @version: version of the TLV - currently 0
479  * @monitor_mode: %enum iwl_fw_dbg_monitor_mode
480  * @size_power: buffer size will be 2^(size_power + 11)
481  * @base_reg: addr of the base addr register (PRPH)
482  * @end_reg:  addr of the end addr register (PRPH)
483  * @write_ptr_reg: the addr of the reg of the write pointer
484  * @wrap_count: the addr of the reg of the wrap_count
485  * @base_shift: shift right of the base addr reg
486  * @end_shift: shift right of the end addr reg
487  * @reg_ops: array of registers operations
488  *
489  * This parses IWL_UCODE_TLV_FW_DBG_DEST
490  */
491 struct iwl_fw_dbg_dest_tlv {
492         u8 version;
493         u8 monitor_mode;
494         u8 size_power;
495         u8 reserved;
496         __le32 base_reg;
497         __le32 end_reg;
498         __le32 write_ptr_reg;
499         __le32 wrap_count;
500         u8 base_shift;
501         u8 end_shift;
502         struct iwl_fw_dbg_reg_op reg_ops[0];
503 } __packed;
504
505 struct iwl_fw_dbg_conf_hcmd {
506         u8 id;
507         u8 reserved;
508         __le16 len;
509         u8 data[0];
510 } __packed;
511
512 /**
513  * enum iwl_fw_dbg_trigger_mode - triggers functionalities
514  *
515  * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
516  * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
517  * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
518  *      collect only monitor data
519  */
520 enum iwl_fw_dbg_trigger_mode {
521         IWL_FW_DBG_TRIGGER_START = BIT(0),
522         IWL_FW_DBG_TRIGGER_STOP = BIT(1),
523         IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
524 };
525
526 /**
527  * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
528  * @IWL_FW_DBG_CONF_VIF_ANY: any vif type
529  * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
530  * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
531  * @IWL_FW_DBG_CONF_VIF_AP: AP mode
532  * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
533  * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
534  * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
535  */
536 enum iwl_fw_dbg_trigger_vif_type {
537         IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
538         IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
539         IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
540         IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
541         IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
542         IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
543         IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
544 };
545
546 /**
547  * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
548  * @id: %enum iwl_fw_dbg_trigger
549  * @vif_type: %enum iwl_fw_dbg_trigger_vif_type
550  * @stop_conf_ids: bitmap of configurations this trigger relates to.
551  *      if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
552  *      to the currently running configuration is set, the data should be
553  *      collected.
554  * @stop_delay: how many milliseconds to wait before collecting the data
555  *      after the STOP trigger fires.
556  * @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both
557  * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
558  *      configuration should be applied when the triggers kicks in.
559  * @occurrences: number of occurrences. 0 means the trigger will never fire.
560  * @trig_dis_ms: the time, in milliseconds, after an occurrence of this
561  *      trigger in which another occurrence should be ignored.
562  */
563 struct iwl_fw_dbg_trigger_tlv {
564         __le32 id;
565         __le32 vif_type;
566         __le32 stop_conf_ids;
567         __le32 stop_delay;
568         u8 mode;
569         u8 start_conf_id;
570         __le16 occurrences;
571         __le16 trig_dis_ms;
572         __le16 reserved[3];
573
574         u8 data[0];
575 } __packed;
576
577 #define FW_DBG_START_FROM_ALIVE 0
578 #define FW_DBG_CONF_MAX         32
579 #define FW_DBG_INVALID          0xff
580
581 /**
582  * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
583  * @stop_consec_missed_bcon: stop recording if threshold is crossed.
584  * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
585  * @start_consec_missed_bcon: start recording if threshold is crossed.
586  * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
587  * @reserved1: reserved
588  * @reserved2: reserved
589  */
590 struct iwl_fw_dbg_trigger_missed_bcon {
591         __le32 stop_consec_missed_bcon;
592         __le32 stop_consec_missed_bcon_since_rx;
593         __le32 reserved2[2];
594         __le32 start_consec_missed_bcon;
595         __le32 start_consec_missed_bcon_since_rx;
596         __le32 reserved1[2];
597 } __packed;
598
599 /**
600  * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
601  * cmds: the list of commands to trigger the collection on
602  */
603 struct iwl_fw_dbg_trigger_cmd {
604         struct cmd {
605                 u8 cmd_id;
606                 u8 group_id;
607         } __packed cmds[16];
608 } __packed;
609
610 /**
611  * iwl_fw_dbg_trigger_stats - configures trigger for statistics
612  * @stop_offset: the offset of the value to be monitored
613  * @stop_threshold: the threshold above which to collect
614  * @start_offset: the offset of the value to be monitored
615  * @start_threshold: the threshold above which to start recording
616  */
617 struct iwl_fw_dbg_trigger_stats {
618         __le32 stop_offset;
619         __le32 stop_threshold;
620         __le32 start_offset;
621         __le32 start_threshold;
622 } __packed;
623
624 /**
625  * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
626  * @rssi: RSSI value to trigger at
627  */
628 struct iwl_fw_dbg_trigger_low_rssi {
629         __le32 rssi;
630 } __packed;
631
632 /**
633  * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events
634  * @stop_auth_denied: number of denied authentication to collect
635  * @stop_auth_timeout: number of authentication timeout to collect
636  * @stop_rx_deauth: number of Rx deauth before to collect
637  * @stop_tx_deauth: number of Tx deauth before to collect
638  * @stop_assoc_denied: number of denied association to collect
639  * @stop_assoc_timeout: number of association timeout to collect
640  * @stop_connection_loss: number of connection loss to collect
641  * @start_auth_denied: number of denied authentication to start recording
642  * @start_auth_timeout: number of authentication timeout to start recording
643  * @start_rx_deauth: number of Rx deauth to start recording
644  * @start_tx_deauth: number of Tx deauth to start recording
645  * @start_assoc_denied: number of denied association to start recording
646  * @start_assoc_timeout: number of association timeout to start recording
647  * @start_connection_loss: number of connection loss to start recording
648  */
649 struct iwl_fw_dbg_trigger_mlme {
650         u8 stop_auth_denied;
651         u8 stop_auth_timeout;
652         u8 stop_rx_deauth;
653         u8 stop_tx_deauth;
654
655         u8 stop_assoc_denied;
656         u8 stop_assoc_timeout;
657         u8 stop_connection_loss;
658         u8 reserved;
659
660         u8 start_auth_denied;
661         u8 start_auth_timeout;
662         u8 start_rx_deauth;
663         u8 start_tx_deauth;
664
665         u8 start_assoc_denied;
666         u8 start_assoc_timeout;
667         u8 start_connection_loss;
668         u8 reserved2;
669 } __packed;
670
671 /**
672  * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
673  * @command_queue: timeout for the command queue in ms
674  * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
675  * @softap: timeout for the queues of a softAP in ms
676  * @p2p_go: timeout for the queues of a P2P GO in ms
677  * @p2p_client: timeout for the queues of a P2P client in ms
678  * @p2p_device: timeout for the queues of a P2P device in ms
679  * @ibss: timeout for the queues of an IBSS in ms
680  * @tdls: timeout for the queues of a TDLS station in ms
681  */
682 struct iwl_fw_dbg_trigger_txq_timer {
683         __le32 command_queue;
684         __le32 bss;
685         __le32 softap;
686         __le32 p2p_go;
687         __le32 p2p_client;
688         __le32 p2p_device;
689         __le32 ibss;
690         __le32 tdls;
691         __le32 reserved[4];
692 } __packed;
693
694 /**
695  * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger
696  * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
697  *      trigger each time a time event notification that relates to time event
698  *      id with one of the actions in the bitmap is received and
699  *      BIT(notif->status) is set in status_bitmap.
700  *
701  */
702 struct iwl_fw_dbg_trigger_time_event {
703         struct {
704                 __le32 id;
705                 __le32 action_bitmap;
706                 __le32 status_bitmap;
707         } __packed time_events[16];
708 } __packed;
709
710 /**
711  * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger
712  * rx_ba_start: tid bitmap to configure on what tid the trigger should occur
713  *      when an Rx BlockAck session is started.
714  * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
715  *      when an Rx BlockAck session is stopped.
716  * tx_ba_start: tid bitmap to configure on what tid the trigger should occur
717  *      when a Tx BlockAck session is started.
718  * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
719  *      when a Tx BlockAck session is stopped.
720  * rx_bar: tid bitmap to configure on what tid the trigger should occur
721  *      when a BAR is received (for a Tx BlockAck session).
722  * tx_bar: tid bitmap to configure on what tid the trigger should occur
723  *      when a BAR is send (for an Rx BlocAck session).
724  * frame_timeout: tid bitmap to configure on what tid the trigger should occur
725  *      when a frame times out in the reodering buffer.
726  */
727 struct iwl_fw_dbg_trigger_ba {
728         __le16 rx_ba_start;
729         __le16 rx_ba_stop;
730         __le16 tx_ba_start;
731         __le16 tx_ba_stop;
732         __le16 rx_bar;
733         __le16 tx_bar;
734         __le16 frame_timeout;
735 } __packed;
736
737 /**
738  * struct iwl_fw_dbg_trigger_tdls - configures trigger for TDLS events.
739  * @action_bitmap: the TDLS action to trigger the collection upon
740  * @peer_mode: trigger on specific peer or all
741  * @peer: the TDLS peer to trigger the collection on
742  */
743 struct iwl_fw_dbg_trigger_tdls {
744         u8 action_bitmap;
745         u8 peer_mode;
746         u8 peer[ETH_ALEN];
747         u8 reserved[4];
748 } __packed;
749
750 /**
751  * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
752  * @id: conf id
753  * @usniffer: should the uSniffer image be used
754  * @num_of_hcmds: how many HCMDs to send are present here
755  * @hcmd: a variable length host command to be sent to apply the configuration.
756  *      If there is more than one HCMD to send, they will appear one after the
757  *      other and be sent in the order that they appear in.
758  * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
759  * %FW_DBG_CONF_MAX configuration per run.
760  */
761 struct iwl_fw_dbg_conf_tlv {
762         u8 id;
763         u8 usniffer;
764         u8 reserved;
765         u8 num_of_hcmds;
766         struct iwl_fw_dbg_conf_hcmd hcmd;
767 } __packed;
768
769 /**
770  * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW
771  * @max_scan_cache_size: total space allocated for scan results (in bytes).
772  * @max_scan_buckets: maximum number of channel buckets.
773  * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan.
774  * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI.
775  * @max_scan_reporting_threshold: max possible report threshold. in percentage.
776  * @max_hotlist_aps: maximum number of entries for hotlist APs.
777  * @max_significant_change_aps: maximum number of entries for significant
778  *      change APs.
779  * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can
780  *      hold.
781  */
782 struct iwl_fw_gscan_capabilities {
783         __le32 max_scan_cache_size;
784         __le32 max_scan_buckets;
785         __le32 max_ap_cache_per_scan;
786         __le32 max_rssi_sample_size;
787         __le32 max_scan_reporting_threshold;
788         __le32 max_hotlist_aps;
789         __le32 max_significant_change_aps;
790         __le32 max_bssid_history_entries;
791 } __packed;
792
793 #endif  /* __iwl_fw_file_h__ */