]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/nfc/st-nci/spi.c
598a58c4d6d1349632ed5b306d33d5163780a6cb
[karo-tx-linux.git] / drivers / nfc / st-nci / spi.c
1 /*
2  * SPI Link Layer for ST NCI based Driver
3  * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms and conditions of the GNU General Public License,
7  * version 2, as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, see <http://www.gnu.org/licenses/>.
16  */
17
18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19
20 #include <linux/module.h>
21 #include <linux/spi/spi.h>
22 #include <linux/gpio.h>
23 #include <linux/of_irq.h>
24 #include <linux/of_gpio.h>
25 #include <linux/interrupt.h>
26 #include <linux/delay.h>
27 #include <linux/nfc.h>
28 #include <linux/platform_data/st-nci.h>
29
30 #include "ndlc.h"
31
32 #define DRIVER_DESC "NCI NFC driver for ST_NCI"
33
34 /* ndlc header */
35 #define ST_NCI_FRAME_HEADROOM   1
36 #define ST_NCI_FRAME_TAILROOM 0
37
38 #define ST_NCI_SPI_MIN_SIZE 4   /* PCB(1) + NCI Packet header(3) */
39 #define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */
40
41 #define ST_NCI_SPI_DRIVER_NAME "st_nci_spi"
42
43 static struct spi_device_id st_nci_spi_id_table[] = {
44         {ST_NCI_SPI_DRIVER_NAME, 0},
45         {}
46 };
47 MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
48
49 struct st_nci_spi_phy {
50         struct spi_device *spi_dev;
51         struct llt_ndlc *ndlc;
52
53         unsigned int gpio_reset;
54         unsigned int irq_polarity;
55 };
56
57 #define SPI_DUMP_SKB(info, skb)                                 \
58 do {                                                            \
59         pr_debug("%s:\n", info);                                \
60         print_hex_dump(KERN_DEBUG, "spi: ", DUMP_PREFIX_OFFSET, \
61                        16, 1, (skb)->data, (skb)->len, 0);      \
62 } while (0)
63
64 static int st_nci_spi_enable(void *phy_id)
65 {
66         struct st_nci_spi_phy *phy = phy_id;
67
68         gpio_set_value(phy->gpio_reset, 0);
69         usleep_range(10000, 15000);
70         gpio_set_value(phy->gpio_reset, 1);
71         usleep_range(80000, 85000);
72
73         if (phy->ndlc->powered == 0)
74                 enable_irq(phy->spi_dev->irq);
75
76         return 0;
77 }
78
79 static void st_nci_spi_disable(void *phy_id)
80 {
81         struct st_nci_spi_phy *phy = phy_id;
82
83         disable_irq_nosync(phy->spi_dev->irq);
84 }
85
86 /*
87  * Writing a frame must not return the number of written bytes.
88  * It must return either zero for success, or <0 for error.
89  * In addition, it must not alter the skb
90  */
91 static int st_nci_spi_write(void *phy_id, struct sk_buff *skb)
92 {
93         int r;
94         struct st_nci_spi_phy *phy = phy_id;
95         struct spi_device *dev = phy->spi_dev;
96         struct sk_buff *skb_rx;
97         u8 buf[ST_NCI_SPI_MAX_SIZE];
98         struct spi_transfer spi_xfer = {
99                 .tx_buf = skb->data,
100                 .rx_buf = buf,
101                 .len = skb->len,
102         };
103
104         SPI_DUMP_SKB("st_nci_spi_write", skb);
105
106         if (phy->ndlc->hard_fault != 0)
107                 return phy->ndlc->hard_fault;
108
109         r = spi_sync_transfer(dev, &spi_xfer, 1);
110         /*
111          * We may have received some valuable data on miso line.
112          * Send them back in the ndlc state machine.
113          */
114         if (!r) {
115                 skb_rx = alloc_skb(skb->len, GFP_KERNEL);
116                 if (!skb_rx) {
117                         r = -ENOMEM;
118                         goto exit;
119                 }
120
121                 skb_put(skb_rx, skb->len);
122                 memcpy(skb_rx->data, buf, skb->len);
123                 ndlc_recv(phy->ndlc, skb_rx);
124         }
125
126 exit:
127         return r;
128 }
129
130 /*
131  * Reads an ndlc frame and returns it in a newly allocated sk_buff.
132  * returns:
133  * 0 : if received frame is complete
134  * -EREMOTEIO : i2c read error (fatal)
135  * -EBADMSG : frame was incorrect and discarded
136  * -ENOMEM : cannot allocate skb, frame dropped
137  */
138 static int st_nci_spi_read(struct st_nci_spi_phy *phy,
139                         struct sk_buff **skb)
140 {
141         int r;
142         u8 len;
143         u8 buf[ST_NCI_SPI_MAX_SIZE];
144         struct spi_device *dev = phy->spi_dev;
145         struct spi_transfer spi_xfer = {
146                 .rx_buf = buf,
147                 .len = ST_NCI_SPI_MIN_SIZE,
148         };
149
150         r = spi_sync_transfer(dev, &spi_xfer, 1);
151         if (r < 0)
152                 return -EREMOTEIO;
153
154         len = be16_to_cpu(*(__be16 *) (buf + 2));
155         if (len > ST_NCI_SPI_MAX_SIZE) {
156                 nfc_err(&dev->dev, "invalid frame len\n");
157                 phy->ndlc->hard_fault = 1;
158                 return -EBADMSG;
159         }
160
161         *skb = alloc_skb(ST_NCI_SPI_MIN_SIZE + len, GFP_KERNEL);
162         if (*skb == NULL)
163                 return -ENOMEM;
164
165         skb_reserve(*skb, ST_NCI_SPI_MIN_SIZE);
166         skb_put(*skb, ST_NCI_SPI_MIN_SIZE);
167         memcpy((*skb)->data, buf, ST_NCI_SPI_MIN_SIZE);
168
169         if (!len)
170                 return 0;
171
172         spi_xfer.len = len;
173         r = spi_sync_transfer(dev, &spi_xfer, 1);
174         if (r < 0) {
175                 kfree_skb(*skb);
176                 return -EREMOTEIO;
177         }
178
179         skb_put(*skb, len);
180         memcpy((*skb)->data + ST_NCI_SPI_MIN_SIZE, buf, len);
181
182         SPI_DUMP_SKB("spi frame read", *skb);
183
184         return 0;
185 }
186
187 /*
188  * Reads an ndlc frame from the chip.
189  *
190  * On ST21NFCB, IRQ goes in idle state when read starts.
191  */
192 static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
193 {
194         struct st_nci_spi_phy *phy = phy_id;
195         struct spi_device *dev;
196         struct sk_buff *skb = NULL;
197         int r;
198
199         if (!phy || !phy->ndlc || irq != phy->spi_dev->irq) {
200                 WARN_ON_ONCE(1);
201                 return IRQ_NONE;
202         }
203
204         dev = phy->spi_dev;
205         dev_dbg(&dev->dev, "IRQ\n");
206
207         if (phy->ndlc->hard_fault)
208                 return IRQ_HANDLED;
209
210         if (!phy->ndlc->powered) {
211                 st_nci_spi_disable(phy);
212                 return IRQ_HANDLED;
213         }
214
215         r = st_nci_spi_read(phy, &skb);
216         if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
217                 return IRQ_HANDLED;
218
219         ndlc_recv(phy->ndlc, skb);
220
221         return IRQ_HANDLED;
222 }
223
224 static struct nfc_phy_ops spi_phy_ops = {
225         .write = st_nci_spi_write,
226         .enable = st_nci_spi_enable,
227         .disable = st_nci_spi_disable,
228 };
229
230 #ifdef CONFIG_OF
231 static int st_nci_spi_of_request_resources(struct spi_device *dev)
232 {
233         struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
234         struct device_node *pp;
235         int gpio;
236         int r;
237
238         pp = dev->dev.of_node;
239         if (!pp)
240                 return -ENODEV;
241
242         /* Get GPIO from device tree */
243         gpio = of_get_named_gpio(pp, "reset-gpios", 0);
244         if (gpio < 0) {
245                 nfc_err(&dev->dev,
246                         "Failed to retrieve reset-gpios from device tree\n");
247                 return gpio;
248         }
249
250         /* GPIO request and configuration */
251         r = devm_gpio_request_one(&dev->dev, gpio,
252                                 GPIOF_OUT_INIT_HIGH, "clf_reset");
253         if (r) {
254                 nfc_err(&dev->dev, "Failed to request reset pin\n");
255                 return r;
256         }
257         phy->gpio_reset = gpio;
258
259         phy->irq_polarity = irq_get_trigger_type(dev->irq);
260
261         return 0;
262 }
263 #else
264 static int st_nci_spi_of_request_resources(struct spi_device *dev)
265 {
266         return -ENODEV;
267 }
268 #endif
269
270 static int st_nci_spi_request_resources(struct spi_device *dev)
271 {
272         struct st_nci_nfc_platform_data *pdata;
273         struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
274         int r;
275
276         pdata = dev->dev.platform_data;
277         if (pdata == NULL) {
278                 nfc_err(&dev->dev, "No platform data\n");
279                 return -EINVAL;
280         }
281
282         /* store for later use */
283         phy->gpio_reset = pdata->gpio_reset;
284         phy->irq_polarity = pdata->irq_polarity;
285
286         r = devm_gpio_request_one(&dev->dev,
287                         phy->gpio_reset, GPIOF_OUT_INIT_HIGH, "clf_reset");
288         if (r) {
289                 pr_err("%s : reset gpio_request failed\n", __FILE__);
290                 return r;
291         }
292
293         return 0;
294 }
295
296 static int st_nci_spi_probe(struct spi_device *dev)
297 {
298         struct st_nci_spi_phy *phy;
299         struct st_nci_nfc_platform_data *pdata;
300         int r;
301
302         dev_dbg(&dev->dev, "%s\n", __func__);
303         dev_dbg(&dev->dev, "IRQ: %d\n", dev->irq);
304
305         /* Check SPI platform functionnalities */
306         if (!dev) {
307                 pr_debug("%s: dev is NULL. Device is not accessible.\n",
308                         __func__);
309                 return -ENODEV;
310         }
311
312         phy = devm_kzalloc(&dev->dev, sizeof(struct st_nci_spi_phy),
313                            GFP_KERNEL);
314         if (!phy)
315                 return -ENOMEM;
316
317         phy->spi_dev = dev;
318
319         spi_set_drvdata(dev, phy);
320
321         pdata = dev->dev.platform_data;
322         if (!pdata && dev->dev.of_node) {
323                 r = st_nci_spi_of_request_resources(dev);
324                 if (r) {
325                         nfc_err(&dev->dev, "No platform data\n");
326                         return r;
327                 }
328         } else if (pdata) {
329                 r = st_nci_spi_request_resources(dev);
330                 if (r) {
331                         nfc_err(&dev->dev,
332                                 "Cannot get platform resources\n");
333                         return r;
334                 }
335         } else {
336                 nfc_err(&dev->dev,
337                         "st_nci platform resources not available\n");
338                 return -ENODEV;
339         }
340
341         r = ndlc_probe(phy, &spi_phy_ops, &dev->dev,
342                         ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
343                         &phy->ndlc);
344         if (r < 0) {
345                 nfc_err(&dev->dev, "Unable to register ndlc layer\n");
346                 return r;
347         }
348
349         r = devm_request_threaded_irq(&dev->dev, dev->irq, NULL,
350                                 st_nci_irq_thread_fn,
351                                 phy->irq_polarity | IRQF_ONESHOT,
352                                 ST_NCI_SPI_DRIVER_NAME, phy);
353         if (r < 0)
354                 nfc_err(&dev->dev, "Unable to register IRQ handler\n");
355
356         return r;
357 }
358
359 static int st_nci_spi_remove(struct spi_device *dev)
360 {
361         struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
362
363         dev_dbg(&dev->dev, "%s\n", __func__);
364
365         ndlc_remove(phy->ndlc);
366
367         return 0;
368 }
369
370 #ifdef CONFIG_OF
371 static const struct of_device_id of_st_nci_spi_match[] = {
372         { .compatible = "st,st21nfcb-spi", },
373         {}
374 };
375 MODULE_DEVICE_TABLE(of, of_st_nci_spi_match);
376 #endif
377
378 static struct spi_driver st_nci_spi_driver = {
379         .driver = {
380                 .owner = THIS_MODULE,
381                 .name = ST_NCI_SPI_DRIVER_NAME,
382                 .of_match_table = of_match_ptr(of_st_nci_spi_match),
383         },
384         .probe = st_nci_spi_probe,
385         .id_table = st_nci_spi_id_table,
386         .remove = st_nci_spi_remove,
387 };
388
389 module_spi_driver(st_nci_spi_driver);
390
391 MODULE_LICENSE("GPL");
392 MODULE_DESCRIPTION(DRIVER_DESC);