drivers/spi/spi-clps711x.c

   1 /*
   2  *  CLPS711X SPI bus driver
   3  *
   4  *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  */
  11
  12 #include <linux/io.h>
  13 #include <linux/clk.h>
  14 #include <linux/init.h>
  15 #include <linux/gpio.h>
  16 #include <linux/delay.h>
  17 #include <linux/module.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/spi/spi.h>
  21 #include <linux/platform_data/spi-clps711x.h>
  22
  23 #include <mach/hardware.h>
  24
  25 #define DRIVER_NAME     "spi-clps711x"
  26
  27 struct spi_clps711x_data {
  28         struct completion       done;
  29
  30         struct clk              *spi_clk;
  31         u32                     max_speed_hz;
  32
  33         u8                      *tx_buf;
  34         u8                      *rx_buf;
  35         int                     count;
  36         int                     len;
  37
  38         int                     chipselect[0];
  39 };
  40
  41 static int spi_clps711x_setup(struct spi_device *spi)
  42 {
  43         struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master);
  44
  45         /* We are expect that SPI-device is not selected */
  46         gpio_direction_output(hw->chipselect[spi->chip_select],
  47                               !(spi->mode & SPI_CS_HIGH));
  48
  49         return 0;
  50 }
  51
  52 static void spi_clps711x_setup_mode(struct spi_device *spi)
  53 {
  54         /* Setup edge for transfer */
  55         if (spi->mode & SPI_CPHA)
  56                 clps_writew(clps_readw(SYSCON3) | SYSCON3_ADCCKNSEN, SYSCON3);
  57         else
  58                 clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCKNSEN, SYSCON3);
  59 }
  60
  61 static int spi_clps711x_setup_xfer(struct spi_device *spi,
  62                                    struct spi_transfer *xfer)
  63 {
  64         u32 speed = xfer->speed_hz ? : spi->max_speed_hz;
  65         u8 bpw = xfer->bits_per_word;
  66         struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master);
  67
  68         if (bpw != 8) {
  69                 dev_err(&spi->dev, "Unsupported master bus width %i\n", bpw);
  70                 return -EINVAL;
  71         }
  72
  73         /* Setup SPI frequency divider */
  74         if (!speed || (speed >= hw->max_speed_hz))
  75                 clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
  76                             SYSCON1_ADCKSEL(3), SYSCON1);
  77         else if (speed >= (hw->max_speed_hz / 2))
  78                 clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
  79                             SYSCON1_ADCKSEL(2), SYSCON1);
  80         else if (speed >= (hw->max_speed_hz / 8))
  81                 clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
  82                             SYSCON1_ADCKSEL(1), SYSCON1);
  83         else
  84                 clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
  85                             SYSCON1_ADCKSEL(0), SYSCON1);
  86
  87         return 0;
  88 }
  89
  90 static int spi_clps711x_transfer_one_message(struct spi_master *master,
  91                                              struct spi_message *msg)
  92 {
  93         struct spi_clps711x_data *hw = spi_master_get_devdata(master);
  94         struct spi_transfer *xfer;
  95         int status = 0, cs = hw->chipselect[msg->spi->chip_select];
  96         u32 data;
  97
  98         spi_clps711x_setup_mode(msg->spi);
  99
 100         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 101                 if (spi_clps711x_setup_xfer(msg->spi, xfer)) {
 102                         status = -EINVAL;
 103                         goto out_xfr;
 104                 }
 105
 106                 gpio_set_value(cs, !!(msg->spi->mode & SPI_CS_HIGH));
 107
 108                 INIT_COMPLETION(hw->done);
 109
 110                 hw->count = 0;
 111                 hw->len = xfer->len;
 112                 hw->tx_buf = (u8 *)xfer->tx_buf;
 113                 hw->rx_buf = (u8 *)xfer->rx_buf;
 114
 115                 /* Initiate transfer */
 116                 data = hw->tx_buf ? hw->tx_buf[hw->count] : 0;
 117                 clps_writel(data | SYNCIO_FRMLEN(8) | SYNCIO_TXFRMEN, SYNCIO);
 118
 119                 wait_for_completion(&hw->done);
 120
 121                 if (xfer->delay_usecs)
 122                         udelay(xfer->delay_usecs);
 123
 124                 if (xfer->cs_change ||
 125                     list_is_last(&xfer->transfer_list, &msg->transfers))
 126                         gpio_set_value(cs, !(msg->spi->mode & SPI_CS_HIGH));
 127
 128                 msg->actual_length += xfer->len;
 129         }
 130
 131 out_xfr:
 132         msg->status = status;
 133         spi_finalize_current_message(master);
 134
 135         return 0;
 136 }
 137
 138 static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
 139 {
 140         struct spi_clps711x_data *hw = (struct spi_clps711x_data *)dev_id;
 141         u32 data;
 142
 143         /* Handle RX */
 144         data = clps_readb(SYNCIO);
 145         if (hw->rx_buf)
 146                 hw->rx_buf[hw->count] = (u8)data;
 147
 148         hw->count++;
 149
 150         /* Handle TX */
 151         if (hw->count < hw->len) {
 152                 data = hw->tx_buf ? hw->tx_buf[hw->count] : 0;
 153                 clps_writel(data | SYNCIO_FRMLEN(8) | SYNCIO_TXFRMEN, SYNCIO);
 154         } else
 155                 complete(&hw->done);
 156
 157         return IRQ_HANDLED;
 158 }
 159
 160 static int spi_clps711x_probe(struct platform_device *pdev)
 161 {
 162         int i, ret;
 163         struct spi_master *master;
 164         struct spi_clps711x_data *hw;
 165         struct spi_clps711x_pdata *pdata = dev_get_platdata(&pdev->dev);
 166
 167         if (!pdata) {
 168                 dev_err(&pdev->dev, "No platform data supplied\n");
 169                 return -EINVAL;
 170         }
 171
 172         if (pdata->num_chipselect < 1) {
 173                 dev_err(&pdev->dev, "At least one CS must be defined\n");
 174                 return -EINVAL;
 175         }
 176
 177         master = spi_alloc_master(&pdev->dev,
 178                                   sizeof(struct spi_clps711x_data) +
 179                                   sizeof(int) * pdata->num_chipselect);
 180         if (!master) {
 181                 dev_err(&pdev->dev, "SPI allocating memory error\n");
 182                 return -ENOMEM;
 183         }
 184
 185         master->bus_num = pdev->id;
 186         master->mode_bits = SPI_CPHA | SPI_CS_HIGH;
 187         master->bits_per_word_mask = SPI_BPW_MASK(8);
 188         master->num_chipselect = pdata->num_chipselect;
 189         master->setup = spi_clps711x_setup;
 190         master->transfer_one_message = spi_clps711x_transfer_one_message;
 191
 192         hw = spi_master_get_devdata(master);
 193
 194         for (i = 0; i < master->num_chipselect; i++) {
 195                 hw->chipselect[i] = pdata->chipselect[i];
 196                 if (!gpio_is_valid(hw->chipselect[i])) {
 197                         dev_err(&pdev->dev, "Invalid CS GPIO %i\n", i);
 198                         ret = -EINVAL;
 199                         goto err_out;
 200                 }
 201                 if (gpio_request(hw->chipselect[i], DRIVER_NAME)) {
 202                         dev_err(&pdev->dev, "Can't get CS GPIO %i\n", i);
 203                         ret = -EINVAL;
 204                         goto err_out;
 205                 }
 206         }
 207
 208         hw->spi_clk = devm_clk_get(&pdev->dev, "spi");
 209         if (IS_ERR(hw->spi_clk)) {
 210                 dev_err(&pdev->dev, "Can't get clocks\n");
 211                 ret = PTR_ERR(hw->spi_clk);
 212                 goto err_out;
 213         }
 214         hw->max_speed_hz = clk_get_rate(hw->spi_clk);
 215
 216         init_completion(&hw->done);
 217         platform_set_drvdata(pdev, master);
 218
 219         /* Disable extended mode due hardware problems */
 220         clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCON, SYSCON3);
 221
 222         /* Clear possible pending interrupt */
 223         clps_readl(SYNCIO);
 224
 225         ret = devm_request_irq(&pdev->dev, IRQ_SSEOTI, spi_clps711x_isr, 0,
 226                                dev_name(&pdev->dev), hw);
 227         if (ret) {
 228                 dev_err(&pdev->dev, "Can't request IRQ\n");
 229                 goto clk_out;
 230         }
 231
 232         ret = spi_register_master(master);
 233         if (!ret) {
 234                 dev_info(&pdev->dev,
 235                          "SPI bus driver initialized. Master clock %u Hz\n",
 236                          hw->max_speed_hz);
 237                 return 0;
 238         }
 239
 240         dev_err(&pdev->dev, "Failed to register master\n");
 241
 242 clk_out:
 243 err_out:
 244         while (--i >= 0)
 245                 if (gpio_is_valid(hw->chipselect[i]))
 246                         gpio_free(hw->chipselect[i]);
 247
 248         spi_master_put(master);
 249
 250         return ret;
 251 }
 252
 253 static int spi_clps711x_remove(struct platform_device *pdev)
 254 {
 255         int i;
 256         struct spi_master *master = platform_get_drvdata(pdev);
 257         struct spi_clps711x_data *hw = spi_master_get_devdata(master);
 258
 259         for (i = 0; i < master->num_chipselect; i++)
 260                 if (gpio_is_valid(hw->chipselect[i]))
 261                         gpio_free(hw->chipselect[i]);
 262
 263         spi_unregister_master(master);
 264
 265         return 0;
 266 }
 267
 268 static struct platform_driver clps711x_spi_driver = {
 269         .driver = {
 270                 .name   = DRIVER_NAME,
 271                 .owner  = THIS_MODULE,
 272         },
 273         .probe  = spi_clps711x_probe,
 274         .remove = spi_clps711x_remove,
 275 };
 276 module_platform_driver(clps711x_spi_driver);
 277
 278 MODULE_LICENSE("GPL");
 279 MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
 280 MODULE_DESCRIPTION("CLPS711X SPI bus driver");