drivers/usb/storage/jumpshot.c

   1 /*
   2  * Driver for Lexar "Jumpshot" Compact Flash reader
   3  *
   4  * jumpshot driver v0.1:
   5  *
   6  * First release
   7  *
   8  * Current development and maintenance by:
   9  *   (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org)
  10  *
  11  *   Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
  12  *   which I used as a template for this driver.
  13  *
  14  *   Some bugfixes and scatter-gather code by Gregory P. Smith
  15  *   (greg-usb@electricrain.com)
  16  *
  17  *   Fix for media change by Joerg Schneider (js@joergschneider.com)
  18  *
  19  * Developed with the assistance of:
  20  *
  21  *   (C) 2002 Alan Stern <stern@rowland.org>
  22  *
  23  * This program is free software; you can redistribute it and/or modify it
  24  * under the terms of the GNU General Public License as published by the
  25  * Free Software Foundation; either version 2, or (at your option) any
  26  * later version.
  27  *
  28  * This program is distributed in the hope that it will be useful, but
  29  * WITHOUT ANY WARRANTY; without even the implied warranty of
  30  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  31  * General Public License for more details.
  32  *
  33  * You should have received a copy of the GNU General Public License along
  34  * with this program; if not, write to the Free Software Foundation, Inc.,
  35  * 675 Mass Ave, Cambridge, MA 02139, USA.
  36  */
  37
  38  /*
  39   * This driver attempts to support the Lexar Jumpshot USB CompactFlash
  40   * reader.  Like many other USB CompactFlash readers, the Jumpshot contains
  41   * a USB-to-ATA chip.
  42   *
  43   * This driver supports reading and writing.  If you're truly paranoid,
  44   * however, you can force the driver into a write-protected state by setting
  45   * the WP enable bits in jumpshot_handle_mode_sense.  See the comments
  46   * in that routine.
  47   */
  48
  49 #include <linux/errno.h>
  50 #include <linux/module.h>
  51 #include <linux/slab.h>
  52
  53 #include <scsi/scsi.h>
  54 #include <scsi/scsi_cmnd.h>
  55
  56 #include "usb.h"
  57 #include "transport.h"
  58 #include "protocol.h"
  59 #include "debug.h"
  60 #include "scsiglue.h"
  61
  62 #define DRV_NAME "ums-jumpshot"
  63
  64 MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader");
  65 MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>");
  66 MODULE_LICENSE("GPL");
  67
  68 /*
  69  * The table of devices
  70  */
  71 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
  72                     vendorName, productName, useProtocol, useTransport, \
  73                     initFunction, flags) \
  74 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
  75   .driver_info = (flags) }
  76
  77 static struct usb_device_id jumpshot_usb_ids[] = {
  78 #       include "unusual_jumpshot.h"
  79         { }             /* Terminating entry */
  80 };
  81 MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids);
  82
  83 #undef UNUSUAL_DEV
  84
  85 /*
  86  * The flags table
  87  */
  88 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
  89                     vendor_name, product_name, use_protocol, use_transport, \
  90                     init_function, Flags) \
  91 { \
  92         .vendorName = vendor_name,      \
  93         .productName = product_name,    \
  94         .useProtocol = use_protocol,    \
  95         .useTransport = use_transport,  \
  96         .initFunction = init_function,  \
  97 }
  98
  99 static struct us_unusual_dev jumpshot_unusual_dev_list[] = {
 100 #       include "unusual_jumpshot.h"
 101         { }             /* Terminating entry */
 102 };
 103
 104 #undef UNUSUAL_DEV
 105
 106
 107 struct jumpshot_info {
 108    unsigned long   sectors;     /* total sector count */
 109    unsigned long   ssize;       /* sector size in bytes */
 110
 111    /* the following aren't used yet */
 112    unsigned char   sense_key;
 113    unsigned long   sense_asc;   /* additional sense code */
 114    unsigned long   sense_ascq;  /* additional sense code qualifier */
 115 };
 116
 117 static inline int jumpshot_bulk_read(struct us_data *us,
 118                                      unsigned char *data,
 119                                      unsigned int len)
 120 {
 121         if (len == 0)
 122                 return USB_STOR_XFER_GOOD;
 123
 124         usb_stor_dbg(us, "len = %d\n", len);
 125         return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
 126                         data, len, NULL);
 127 }
 128
 129
 130 static inline int jumpshot_bulk_write(struct us_data *us,
 131                                       unsigned char *data,
 132                                       unsigned int len)
 133 {
 134         if (len == 0)
 135                 return USB_STOR_XFER_GOOD;
 136
 137         usb_stor_dbg(us, "len = %d\n", len);
 138         return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
 139                         data, len, NULL);
 140 }
 141
 142
 143 static int jumpshot_get_status(struct us_data  *us)
 144 {
 145         int rc;
 146
 147         if (!us)
 148                 return USB_STOR_TRANSPORT_ERROR;
 149
 150         // send the setup
 151         rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
 152                                    0, 0xA0, 0, 7, us->iobuf, 1);
 153
 154         if (rc != USB_STOR_XFER_GOOD)
 155                 return USB_STOR_TRANSPORT_ERROR;
 156
 157         if (us->iobuf[0] != 0x50) {
 158                 usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]);
 159                 return USB_STOR_TRANSPORT_ERROR;
 160         }
 161
 162         return USB_STOR_TRANSPORT_GOOD;
 163 }
 164
 165 static int jumpshot_read_data(struct us_data *us,
 166                               struct jumpshot_info *info,
 167                               u32 sector,
 168                               u32 sectors)
 169 {
 170         unsigned char *command = us->iobuf;
 171         unsigned char *buffer;
 172         unsigned char  thistime;
 173         unsigned int totallen, alloclen;
 174         int len, result;
 175         unsigned int sg_offset = 0;
 176         struct scatterlist *sg = NULL;
 177
 178         // we're working in LBA mode.  according to the ATA spec,
 179         // we can support up to 28-bit addressing.  I don't know if Jumpshot
 180         // supports beyond 24-bit addressing.  It's kind of hard to test
 181         // since it requires > 8GB CF card.
 182
 183         if (sector > 0x0FFFFFFF)
 184                 return USB_STOR_TRANSPORT_ERROR;
 185
 186         totallen = sectors * info->ssize;
 187
 188         // Since we don't read more than 64 KB at a time, we have to create
 189         // a bounce buffer and move the data a piece at a time between the
 190         // bounce buffer and the actual transfer buffer.
 191
 192         alloclen = min(totallen, 65536u);
 193         buffer = kmalloc(alloclen, GFP_NOIO);
 194         if (buffer == NULL)
 195                 return USB_STOR_TRANSPORT_ERROR;
 196
 197         do {
 198                 // loop, never allocate or transfer more than 64k at once
 199                 // (min(128k, 255*info->ssize) is the real limit)
 200                 len = min(totallen, alloclen);
 201                 thistime = (len / info->ssize) & 0xff;
 202
 203                 command[0] = 0;
 204                 command[1] = thistime;
 205                 command[2] = sector & 0xFF;
 206                 command[3] = (sector >>  8) & 0xFF;
 207                 command[4] = (sector >> 16) & 0xFF;
 208
 209                 command[5] = 0xE0 | ((sector >> 24) & 0x0F);
 210                 command[6] = 0x20;
 211
 212                 // send the setup + command
 213                 result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 214                                                0, 0x20, 0, 1, command, 7);
 215                 if (result != USB_STOR_XFER_GOOD)
 216                         goto leave;
 217
 218                 // read the result
 219                 result = jumpshot_bulk_read(us, buffer, len);
 220                 if (result != USB_STOR_XFER_GOOD)
 221                         goto leave;
 222
 223                 usb_stor_dbg(us, "%d bytes\n", len);
 224
 225                 // Store the data in the transfer buffer
 226                 usb_stor_access_xfer_buf(buffer, len, us->srb,
 227                                  &sg, &sg_offset, TO_XFER_BUF);
 228
 229                 sector += thistime;
 230                 totallen -= len;
 231         } while (totallen > 0);
 232
 233         kfree(buffer);
 234         return USB_STOR_TRANSPORT_GOOD;
 235
 236  leave:
 237         kfree(buffer);
 238         return USB_STOR_TRANSPORT_ERROR;
 239 }
 240
 241
 242 static int jumpshot_write_data(struct us_data *us,
 243                                struct jumpshot_info *info,
 244                                u32 sector,
 245                                u32 sectors)
 246 {
 247         unsigned char *command = us->iobuf;
 248         unsigned char *buffer;
 249         unsigned char  thistime;
 250         unsigned int totallen, alloclen;
 251         int len, result, waitcount;
 252         unsigned int sg_offset = 0;
 253         struct scatterlist *sg = NULL;
 254
 255         // we're working in LBA mode.  according to the ATA spec,
 256         // we can support up to 28-bit addressing.  I don't know if Jumpshot
 257         // supports beyond 24-bit addressing.  It's kind of hard to test
 258         // since it requires > 8GB CF card.
 259         //
 260         if (sector > 0x0FFFFFFF)
 261                 return USB_STOR_TRANSPORT_ERROR;
 262
 263         totallen = sectors * info->ssize;
 264
 265         // Since we don't write more than 64 KB at a time, we have to create
 266         // a bounce buffer and move the data a piece at a time between the
 267         // bounce buffer and the actual transfer buffer.
 268
 269         alloclen = min(totallen, 65536u);
 270         buffer = kmalloc(alloclen, GFP_NOIO);
 271         if (buffer == NULL)
 272                 return USB_STOR_TRANSPORT_ERROR;
 273
 274         do {
 275                 // loop, never allocate or transfer more than 64k at once
 276                 // (min(128k, 255*info->ssize) is the real limit)
 277
 278                 len = min(totallen, alloclen);
 279                 thistime = (len / info->ssize) & 0xff;
 280
 281                 // Get the data from the transfer buffer
 282                 usb_stor_access_xfer_buf(buffer, len, us->srb,
 283                                 &sg, &sg_offset, FROM_XFER_BUF);
 284
 285                 command[0] = 0;
 286                 command[1] = thistime;
 287                 command[2] = sector & 0xFF;
 288                 command[3] = (sector >>  8) & 0xFF;
 289                 command[4] = (sector >> 16) & 0xFF;
 290
 291                 command[5] = 0xE0 | ((sector >> 24) & 0x0F);
 292                 command[6] = 0x30;
 293
 294                 // send the setup + command
 295                 result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 296                         0, 0x20, 0, 1, command, 7);
 297                 if (result != USB_STOR_XFER_GOOD)
 298                         goto leave;
 299
 300                 // send the data
 301                 result = jumpshot_bulk_write(us, buffer, len);
 302                 if (result != USB_STOR_XFER_GOOD)
 303                         goto leave;
 304
 305                 // read the result.  apparently the bulk write can complete
 306                 // before the jumpshot drive is finished writing.  so we loop
 307                 // here until we get a good return code
 308                 waitcount = 0;
 309                 do {
 310                         result = jumpshot_get_status(us);
 311                         if (result != USB_STOR_TRANSPORT_GOOD) {
 312                                 // I have not experimented to find the smallest value.
 313                                 //
 314                                 msleep(50);
 315                         }
 316                 } while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10));
 317
 318                 if (result != USB_STOR_TRANSPORT_GOOD)
 319                         usb_stor_dbg(us, "Gah!  Waitcount = 10.  Bad write!?\n");
 320
 321                 sector += thistime;
 322                 totallen -= len;
 323         } while (totallen > 0);
 324
 325         kfree(buffer);
 326         return result;
 327
 328  leave:
 329         kfree(buffer);
 330         return USB_STOR_TRANSPORT_ERROR;
 331 }
 332
 333 static int jumpshot_id_device(struct us_data *us,
 334                               struct jumpshot_info *info)
 335 {
 336         unsigned char *command = us->iobuf;
 337         unsigned char *reply;
 338         int      rc;
 339
 340         if (!info)
 341                 return USB_STOR_TRANSPORT_ERROR;
 342
 343         command[0] = 0xE0;
 344         command[1] = 0xEC;
 345         reply = kmalloc(512, GFP_NOIO);
 346         if (!reply)
 347                 return USB_STOR_TRANSPORT_ERROR;
 348
 349         // send the setup
 350         rc = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 351                                    0, 0x20, 0, 6, command, 2);
 352
 353         if (rc != USB_STOR_XFER_GOOD) {
 354                 usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n");
 355                 rc = USB_STOR_TRANSPORT_ERROR;
 356                 goto leave;
 357         }
 358
 359         // read the reply
 360         rc = jumpshot_bulk_read(us, reply, 512);
 361         if (rc != USB_STOR_XFER_GOOD) {
 362                 rc = USB_STOR_TRANSPORT_ERROR;
 363                 goto leave;
 364         }
 365
 366         info->sectors = ((u32)(reply[117]) << 24) |
 367                         ((u32)(reply[116]) << 16) |
 368                         ((u32)(reply[115]) <<  8) |
 369                         ((u32)(reply[114])      );
 370
 371         rc = USB_STOR_TRANSPORT_GOOD;
 372
 373  leave:
 374         kfree(reply);
 375         return rc;
 376 }
 377
 378 static int jumpshot_handle_mode_sense(struct us_data *us,
 379                                       struct scsi_cmnd * srb,
 380                                       int sense_6)
 381 {
 382         static unsigned char rw_err_page[12] = {
 383                 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
 384         };
 385         static unsigned char cache_page[12] = {
 386                 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
 387         };
 388         static unsigned char rbac_page[12] = {
 389                 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
 390         };
 391         static unsigned char timer_page[8] = {
 392                 0x1C, 0x6, 0, 0, 0, 0
 393         };
 394         unsigned char pc, page_code;
 395         unsigned int i = 0;
 396         struct jumpshot_info *info = (struct jumpshot_info *) (us->extra);
 397         unsigned char *ptr = us->iobuf;
 398
 399         pc = srb->cmnd[2] >> 6;
 400         page_code = srb->cmnd[2] & 0x3F;
 401
 402         switch (pc) {
 403            case 0x0:
 404                    usb_stor_dbg(us, "Current values\n");
 405                    break;
 406            case 0x1:
 407                    usb_stor_dbg(us, "Changeable values\n");
 408                    break;
 409            case 0x2:
 410                    usb_stor_dbg(us, "Default values\n");
 411                    break;
 412            case 0x3:
 413                    usb_stor_dbg(us, "Saves values\n");
 414                    break;
 415         }
 416
 417         memset(ptr, 0, 8);
 418         if (sense_6) {
 419                 ptr[2] = 0x00;          // WP enable: 0x80
 420                 i = 4;
 421         } else {
 422                 ptr[3] = 0x00;          // WP enable: 0x80
 423                 i = 8;
 424         }
 425
 426         switch (page_code) {
 427            case 0x0:
 428                 // vendor-specific mode
 429                 info->sense_key = 0x05;
 430                 info->sense_asc = 0x24;
 431                 info->sense_ascq = 0x00;
 432                 return USB_STOR_TRANSPORT_FAILED;
 433
 434            case 0x1:
 435                 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
 436                 i += sizeof(rw_err_page);
 437                 break;
 438
 439            case 0x8:
 440                 memcpy(ptr + i, cache_page, sizeof(cache_page));
 441                 i += sizeof(cache_page);
 442                 break;
 443
 444            case 0x1B:
 445                 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
 446                 i += sizeof(rbac_page);
 447                 break;
 448
 449            case 0x1C:
 450                 memcpy(ptr + i, timer_page, sizeof(timer_page));
 451                 i += sizeof(timer_page);
 452                 break;
 453
 454            case 0x3F:
 455                 memcpy(ptr + i, timer_page, sizeof(timer_page));
 456                 i += sizeof(timer_page);
 457                 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
 458                 i += sizeof(rbac_page);
 459                 memcpy(ptr + i, cache_page, sizeof(cache_page));
 460                 i += sizeof(cache_page);
 461                 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
 462                 i += sizeof(rw_err_page);
 463                 break;
 464         }
 465
 466         if (sense_6)
 467                 ptr[0] = i - 1;
 468         else
 469                 ((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
 470         usb_stor_set_xfer_buf(ptr, i, srb);
 471
 472         return USB_STOR_TRANSPORT_GOOD;
 473 }
 474
 475
 476 static void jumpshot_info_destructor(void *extra)
 477 {
 478         // this routine is a placeholder...
 479         // currently, we don't allocate any extra blocks so we're okay
 480 }
 481
 482
 483
 484 // Transport for the Lexar 'Jumpshot'
 485 //
 486 static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
 487 {
 488         struct jumpshot_info *info;
 489         int rc;
 490         unsigned long block, blocks;
 491         unsigned char *ptr = us->iobuf;
 492         static unsigned char inquiry_response[8] = {
 493                 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
 494         };
 495
 496         if (!us->extra) {
 497                 us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO);
 498                 if (!us->extra)
 499                         return USB_STOR_TRANSPORT_ERROR;
 500
 501                 us->extra_destructor = jumpshot_info_destructor;
 502         }
 503
 504         info = (struct jumpshot_info *) (us->extra);
 505
 506         if (srb->cmnd[0] == INQUIRY) {
 507                 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
 508                 memcpy(ptr, inquiry_response, sizeof(inquiry_response));
 509                 fill_inquiry_response(us, ptr, 36);
 510                 return USB_STOR_TRANSPORT_GOOD;
 511         }
 512
 513         if (srb->cmnd[0] == READ_CAPACITY) {
 514                 info->ssize = 0x200;  // hard coded 512 byte sectors as per ATA spec
 515
 516                 rc = jumpshot_get_status(us);
 517                 if (rc != USB_STOR_TRANSPORT_GOOD)
 518                         return rc;
 519
 520                 rc = jumpshot_id_device(us, info);
 521                 if (rc != USB_STOR_TRANSPORT_GOOD)
 522                         return rc;
 523
 524                 usb_stor_dbg(us, "READ_CAPACITY:  %ld sectors, %ld bytes per sector\n",
 525                              info->sectors, info->ssize);
 526
 527                 // build the reply
 528                 //
 529                 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
 530                 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
 531                 usb_stor_set_xfer_buf(ptr, 8, srb);
 532
 533                 return USB_STOR_TRANSPORT_GOOD;
 534         }
 535
 536         if (srb->cmnd[0] == MODE_SELECT_10) {
 537                 usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
 538                 return USB_STOR_TRANSPORT_ERROR;
 539         }
 540
 541         if (srb->cmnd[0] == READ_10) {
 542                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
 543                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
 544
 545                 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
 546
 547                 usb_stor_dbg(us, "READ_10: read block 0x%04lx  count %ld\n",
 548                              block, blocks);
 549                 return jumpshot_read_data(us, info, block, blocks);
 550         }
 551
 552         if (srb->cmnd[0] == READ_12) {
 553                 // I don't think we'll ever see a READ_12 but support it anyway...
 554                 //
 555                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
 556                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
 557
 558                 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
 559                          ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
 560
 561                 usb_stor_dbg(us, "READ_12: read block 0x%04lx  count %ld\n",
 562                              block, blocks);
 563                 return jumpshot_read_data(us, info, block, blocks);
 564         }
 565
 566         if (srb->cmnd[0] == WRITE_10) {
 567                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
 568                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
 569
 570                 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
 571
 572                 usb_stor_dbg(us, "WRITE_10: write block 0x%04lx  count %ld\n",
 573                              block, blocks);
 574                 return jumpshot_write_data(us, info, block, blocks);
 575         }
 576
 577         if (srb->cmnd[0] == WRITE_12) {
 578                 // I don't think we'll ever see a WRITE_12 but support it anyway...
 579                 //
 580                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
 581                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
 582
 583                 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
 584                          ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
 585
 586                 usb_stor_dbg(us, "WRITE_12: write block 0x%04lx  count %ld\n",
 587                              block, blocks);
 588                 return jumpshot_write_data(us, info, block, blocks);
 589         }
 590
 591
 592         if (srb->cmnd[0] == TEST_UNIT_READY) {
 593                 usb_stor_dbg(us, "TEST_UNIT_READY\n");
 594                 return jumpshot_get_status(us);
 595         }
 596
 597         if (srb->cmnd[0] == REQUEST_SENSE) {
 598                 usb_stor_dbg(us, "REQUEST_SENSE\n");
 599
 600                 memset(ptr, 0, 18);
 601                 ptr[0] = 0xF0;
 602                 ptr[2] = info->sense_key;
 603                 ptr[7] = 11;
 604                 ptr[12] = info->sense_asc;
 605                 ptr[13] = info->sense_ascq;
 606                 usb_stor_set_xfer_buf(ptr, 18, srb);
 607
 608                 return USB_STOR_TRANSPORT_GOOD;
 609         }
 610
 611         if (srb->cmnd[0] == MODE_SENSE) {
 612                 usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
 613                 return jumpshot_handle_mode_sense(us, srb, 1);
 614         }
 615
 616         if (srb->cmnd[0] == MODE_SENSE_10) {
 617                 usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
 618                 return jumpshot_handle_mode_sense(us, srb, 0);
 619         }
 620
 621         if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
 622                 /*
 623                  * sure.  whatever.  not like we can stop the user from popping
 624                  * the media out of the device (no locking doors, etc)
 625                  */
 626                 return USB_STOR_TRANSPORT_GOOD;
 627         }
 628
 629         if (srb->cmnd[0] == START_STOP) {
 630                 /*
 631                  * this is used by sd.c'check_scsidisk_media_change to detect
 632                  * media change
 633                  */
 634                 usb_stor_dbg(us, "START_STOP\n");
 635                 /*
 636                  * the first jumpshot_id_device after a media change returns
 637                  * an error (determined experimentally)
 638                  */
 639                 rc = jumpshot_id_device(us, info);
 640                 if (rc == USB_STOR_TRANSPORT_GOOD) {
 641                         info->sense_key = NO_SENSE;
 642                         srb->result = SUCCESS;
 643                 } else {
 644                         info->sense_key = UNIT_ATTENTION;
 645                         srb->result = SAM_STAT_CHECK_CONDITION;
 646                 }
 647                 return rc;
 648         }
 649
 650         usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
 651                      srb->cmnd[0], srb->cmnd[0]);
 652         info->sense_key = 0x05;
 653         info->sense_asc = 0x20;
 654         info->sense_ascq = 0x00;
 655         return USB_STOR_TRANSPORT_FAILED;
 656 }
 657
 658 static struct scsi_host_template jumpshot_host_template;
 659
 660 static int jumpshot_probe(struct usb_interface *intf,
 661                          const struct usb_device_id *id)
 662 {
 663         struct us_data *us;
 664         int result;
 665
 666         result = usb_stor_probe1(&us, intf, id,
 667                         (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list,
 668                         &jumpshot_host_template);
 669         if (result)
 670                 return result;
 671
 672         us->transport_name  = "Lexar Jumpshot Control/Bulk";
 673         us->transport = jumpshot_transport;
 674         us->transport_reset = usb_stor_Bulk_reset;
 675         us->max_lun = 1;
 676
 677         result = usb_stor_probe2(us);
 678         return result;
 679 }
 680
 681 static struct usb_driver jumpshot_driver = {
 682         .name =         DRV_NAME,
 683         .probe =        jumpshot_probe,
 684         .disconnect =   usb_stor_disconnect,
 685         .suspend =      usb_stor_suspend,
 686         .resume =       usb_stor_resume,
 687         .reset_resume = usb_stor_reset_resume,
 688         .pre_reset =    usb_stor_pre_reset,
 689         .post_reset =   usb_stor_post_reset,
 690         .id_table =     jumpshot_usb_ids,
 691         .soft_unbind =  1,
 692         .no_dynamic_id = 1,
 693 };
 694
 695 module_usb_stor_driver(jumpshot_driver, jumpshot_host_template, DRV_NAME);