ARM: config: sort select statements alphanumerically

[karo-tx-linux.git] / arch / arm / mach-s3c24xx / Kconfig

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d56b0f7f2b202a0aaea0b36435328ff15b8c783f..2b6cb5f29c2d09f8ca405d820c450c7f4b903b5c 100644 (file)
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -17,10 +17,10 @@ config CPU_S3C2410
        bool "SAMSUNG S3C2410"
        default y
        select CPU_ARM920T
-       select S3C2410_CLOCK
        select CPU_LLSERIAL_S3C2410
-       select S3C2410_PM if PM
+       select S3C2410_CLOCK
        select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+       select S3C2410_PM if PM
        help
          Support for S3C2410 and S3C2410A family from the S3C24XX line
          of Samsung Mobile CPUs.
@@ -30,8 +30,8 @@ config CPU_S3C2412
        depends on ARCH_S3C24XX
        select CPU_ARM926T
        select CPU_LLSERIAL_S3C2440
-       select S3C2412_PM if PM
        select S3C2412_DMA if S3C24XX_DMA
+       select S3C2412_PM if PM
        help
          Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -40,10 +40,10 @@ config CPU_S3C2416
        depends on ARCH_S3C24XX
        select CPU_ARM926T
        select CPU_LLSERIAL_S3C2440
-       select SAMSUNG_CLKSRC
+       select S3C2416_PM if PM
        select S3C2443_COMMON
        select S3C2443_DMA if S3C24XX_DMA
-       select S3C2416_PM if PM
+       select SAMSUNG_CLKSRC
        help
          Support for the S3C2416 SoC from the S3C24XX line
 
@@ -75,9 +75,9 @@ config CPU_S3C2443
        depends on ARCH_S3C24XX
        select CPU_ARM920T
        select CPU_LLSERIAL_S3C2440
-       select SAMSUNG_CLKSRC
        select S3C2443_COMMON
        select S3C2443_DMA if S3C24XX_DMA
+       select SAMSUNG_CLKSRC
        help
          Support for the S3C2443 SoC from the S3C24XX line
 
@@ -156,16 +156,16 @@ config MACH_AML_M5900
 
 config ARCH_BAST
        bool "Simtec Electronics BAST (EB2410ITX)"
+       select ISA
+       select MACH_BAST_IDE
        select S3C2410_IOTIMING if S3C2410_CPUFREQ
-       select S3C24XX_SIMTEC_PM if PM
+       select S3C24XX_DCLK
        select S3C24XX_SIMTEC_NOR
+       select S3C24XX_SIMTEC_PM if PM
        select S3C24XX_SIMTEC_USB
-       select MACH_BAST_IDE
-       select S3C24XX_DCLK
-       select ISA
        select S3C_DEV_HWMON
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the Simtec Electronics EB2410ITX
          development board (also known as BAST)
@@ -181,9 +181,9 @@ config BAST_PC104_IRQ
 config ARCH_H1940
        bool "IPAQ H1940"
        select PM_H1940 if PM
-       select S3C_DEV_USB_HOST
-       select S3C_DEV_NAND
        select S3C24XX_SETUP_TS
+       select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the HP IPAQ H1940
 
@@ -203,23 +203,23 @@ config PM_H1940
 config MACH_N30
        bool "Acer N30 family"
        select MACH_N35
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you want suppt for the Acer N30, Acer N35,
          Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 
 config MACH_OTOM
        bool "NexVision OTOM Board"
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the Nex Vision OTOM board
 
 config MACH_QT2410
        bool "QT2410"
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the Armzone QT2410
 
@@ -239,12 +239,12 @@ config MACH_TCT_HAMMER
 
 config MACH_VR1000
        bool "Thorcom VR1000"
-       select S3C24XX_SIMTEC_PM if PM
+       select MACH_BAST_IDE
        select S3C24XX_DCLK
        select S3C24XX_SIMTEC_NOR
-       select MACH_BAST_IDE
-       select S3C_DEV_USB_HOST
+       select S3C24XX_SIMTEC_PM if PM
        select S3C24XX_SIMTEC_USB
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the Thorcom VR1000 board.
 
@@ -285,8 +285,8 @@ comment "S3C2412 Boards"
 
 config MACH_JIVE
        bool "Logitech Jive"
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the Logitech Jive.
 
@@ -314,15 +314,15 @@ config MACH_SMDK2413
        bool "SMDK2413"
        select MACH_S3C2413
        select S3C24XX_SMDK
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using an SMDK2413
 
 config MACH_VSTMS
        bool "VMSTMS"
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using an VSTMS board
 
@@ -351,13 +351,13 @@ comment "S3C2416 Boards"
 
 config MACH_SMDK2416
        bool "SMDK2416"
+       select S3C2416_SETUP_SDHCI
        select S3C24XX_SMDK
        select S3C_DEV_FB
        select S3C_DEV_HSMMC
        select S3C_DEV_HSMMC1
        select S3C_DEV_NAND
        select S3C_DEV_USB_HOST
-       select S3C2416_SETUP_SDHCI
        help
          Say Y here if you are using an SMDK2416
 
@@ -379,11 +379,11 @@ comment "S3C2440 Boards"
 
 config MACH_ANUBIS
        bool "Simtec Electronics ANUBIS"
-       select S3C24XX_DCLK
-       select S3C24XX_SIMTEC_PM if PM
        select HAVE_PATA_PLATFORM
-       select S3C24XX_GPIO_EXTRA64
        select S3C2440_XTAL_12000000
+       select S3C24XX_DCLK
+       select S3C24XX_GPIO_EXTRA64
+       select S3C24XX_SIMTEC_PM if PM
        select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the Simtec Electronics ANUBIS
@@ -391,18 +391,18 @@ config MACH_ANUBIS
 
 config MACH_AT2440EVB
        bool "Avantech AT2440EVB development board"
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the AT2440EVB development board
 
 config MACH_MINI2440
        bool "MINI2440 development board"
        select EEPROM_AT24
-       select NEW_LEDS
        select LEDS_CLASS
        select LEDS_TRIGGER
        select LEDS_TRIGGER_BACKLIGHT
+       select NEW_LEDS
        select S3C_DEV_NAND
        select S3C_DEV_USB_HOST
        help
@@ -412,20 +412,20 @@ config MACH_MINI2440
 config MACH_NEXCODER_2440
        bool "NexVision NEXCODER 2440 Light Board"
        select S3C2440_XTAL_12000000
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
 config MACH_OSIRIS
        bool "Simtec IM2440D20 (OSIRIS) module"
+       select S3C2410_IOTIMING if S3C2440_CPUFREQ
+       select S3C2440_XTAL_12000000
        select S3C24XX_DCLK
-       select S3C24XX_SIMTEC_PM if PM
        select S3C24XX_GPIO_EXTRA128
-       select S3C2440_XTAL_12000000
-       select S3C2410_IOTIMING if S3C2440_CPUFREQ
-       select S3C_DEV_USB_HOST
+       select S3C24XX_SIMTEC_PM if PM
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the Simtec IM2440D20 module, also
          known as the Osiris.
@@ -445,8 +445,8 @@ config MACH_OSIRIS_DVS
 
 config MACH_RX3715
        bool "HP iPAQ rx3715"
-       select S3C2440_XTAL_16934400
        select PM_H1940 if PM
+       select S3C2440_XTAL_16934400
        select S3C_DEV_NAND
        help
          Say Y here if you are using the HP iPAQ rx3715.
@@ -455,8 +455,8 @@ config ARCH_S3C2440
        bool "SMDK2440"
        select S3C2440_XTAL_16934400
        select S3C24XX_SMDK
-       select S3C_DEV_USB_HOST
        select S3C_DEV_NAND
+       select S3C_DEV_USB_HOST
        help
          Say Y here if you are using the SMDK2440.
 
@@ -478,11 +478,11 @@ comment "S3C2442 Boards"
 
 config MACH_NEO1973_GTA02
        bool "Openmoko GTA02 / Freerunner phone"
+       select I2C
+       select MACH_NEO1973
        select MFD_PCF50633
        select PCF50633_GPIO
-       select I2C
        select POWER_SUPPLY
-       select MACH_NEO1973
        select S3C24XX_PWM
        select S3C_DEV_USB_HOST
        help
@@ -490,13 +490,13 @@ config MACH_NEO1973_GTA02
 
 config MACH_RX1950
        bool "HP iPAQ rx1950"
-       select S3C24XX_DCLK
-       select PM_H1940 if PM
        select I2C
-       select S3C24XX_PWM
-       select S3C_DEV_NAND
+       select PM_H1940 if PM
        select S3C2410_IOTIMING if S3C2440_CPUFREQ
        select S3C2440_XTAL_16934400
+       select S3C24XX_DCLK
+       select S3C24XX_PWM
+       select S3C_DEV_NAND
        help
           Say Y here if you're using HP iPAQ rx1950