config ARM
bool
default y
+ select ARCH_BINFMT_ELF_RANDOMIZE_PIE
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_HAVE_CUSTOM_GPIO_H
- select HAVE_AOUT
- select HAVE_DMA_API_DEBUG
- select HAVE_IDE if PCI || ISA || PCMCIA
- select HAVE_DMA_ATTRS
- select HAVE_DMA_CONTIGUOUS if MMU
- select HAVE_MEMBLOCK
- select RTC_LIB
- select SYS_SUPPORTS_APM_EMULATION
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select CPU_PM if (SUSPEND || CPU_IDLE)
+ select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
- select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
- select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_KERNEL_THREAD
+ select GENERIC_PCI_IOMAP
+ select GENERIC_SMP_IDLE_THREAD
+ select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
+ select HARDIRQS_SW_RESEND
+ select HAVE_AOUT
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
- select HAVE_SYSCALL_TRACEPOINTS
- select HAVE_KPROBES if !XIP_KERNEL
- select HAVE_KRETPROBES if (HAVE_KPROBES)
- select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
- select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+ select HAVE_BPF_JIT
+ select HAVE_C_RECORDMCOUNT
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DMA_API_DEBUG
+ select HAVE_DMA_ATTRS
+ select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+ select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
- select ARCH_BINFMT_ELF_RANDOMIZE_PIE
+ select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
- select HAVE_DEBUG_KMEMLEAK
+ select HAVE_GENERIC_HARDIRQS
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
+ select HAVE_IDE if PCI || ISA || PCMCIA
+ select HAVE_IRQ_WORK
select HAVE_KERNEL_GZIP
- select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
- select HAVE_IRQ_WORK
+ select HAVE_KPROBES if !XIP_KERNEL
+ select HAVE_KRETPROBES if (HAVE_KPROBES)
+ select HAVE_MEMBLOCK
+ select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_PERF_EVENTS
- select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
- select HAVE_C_RECORDMCOUNT
- select HAVE_GENERIC_HARDIRQS
- select HARDIRQS_SW_RESEND
- select GENERIC_IRQ_PROBE
- select GENERIC_IRQ_SHOW
+ select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
- select ARCH_WANT_IPC_PARSE_VERSION
- select HARDIRQS_SW_RESEND
- select CPU_PM if (SUSPEND || CPU_IDLE)
- select GENERIC_PCI_IOMAP
- select HAVE_BPF_JIT
- select GENERIC_SMP_IDLE_THREAD
select KTIME_SCALAR
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select GENERIC_STRNCPY_FROM_USER
- select GENERIC_STRNLEN_USER
- select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
- select GENERIC_KERNEL_THREAD
+ select PERF_USE_VMALLOC
+ select RTC_LIB
+ select SYS_SUPPORTS_APM_EMULATION
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
bool
config ARM_DMA_USE_IOMMU
- select NEED_SG_DMA_LENGTH
- select ARM_HAS_SG_CHAIN
bool
+ select ARM_HAS_SG_CHAIN
+ select NEED_SG_DMA_LENGTH
config HAVE_PWM
bool
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
+ depends on MMU
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
select COMMON_CLK
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
- depends on MMU
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
- select ARM_AMBA
select ARCH_HAS_CPUFREQ
+ select ARM_AMBA
select COMMON_CLK
select COMMON_CLK_VERSATILE
+ select GENERIC_CLOCKEVENTS
select HAVE_TCM
select ICST
- select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
- select NEED_MACH_MEMORY_H
select SPARSE_IRQ
- select MULTI_IRQ_HANDLER
help
Support for ARM's Integrator platform.
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
+ select ARM_TIMER_SP804
select COMMON_CLK
select COMMON_CLK_VERSATILE
- select ICST
select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select PLAT_VERSATILE
- select PLAT_VERSATILE_CLCD
- select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
+ select ICST
select NEED_MACH_MEMORY_H
+ select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLCD
help
This enables support for ARM Ltd RealView boards.
config ARCH_VERSATILE
bool "ARM Ltd. Versatile family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
+ select ARM_TIMER_SP804
select ARM_VIC
select CLKDEV_LOOKUP
+ select GENERIC_CLOCKEVENTS
select HAVE_MACH_CLKDEV
select ICST
- select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
- select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_FPGA_IRQ
- select ARM_TIMER_SP804
help
This enables support for ARM Ltd Versatile board.
config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
select CLKDEV_LOOKUP
+ select HAVE_CLK
select IRQ_DOMAIN
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
- select CPU_ARM720T
select ARCH_USES_GETTIMEOFFSET
- select COMMON_CLK
select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_ARM720T
select NEED_MACH_MEMORY_H
help
Support for Cirrus Logic 711x/721x/731x based boards.
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family"
+ select ARM_GIC
select CPU_V6K
select GENERIC_CLOCKEVENTS
- select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
config ARCH_GEMINI
bool "Cortina Systems Gemini"
- select CPU_FA526
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
+ select CPU_FA526
help
Support for the Cortina Systems Gemini family SoCs
config ARCH_SIRF
bool "CSR SiRF"
- select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0
+ select NO_IOPORT
select PINCTRL
select PINCTRL_SIRF
select USE_OF
config ARCH_EBSA110
bool "EBSA-110"
+ select ARCH_USES_GETTIMEOFFSET
select CPU_SA110
select ISA
- select NO_IOPORT
- select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
+ select NO_IOPORT
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
config ARCH_EP93XX
bool "EP93xx-based"
- select CPU_ARM920T
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
select ARM_AMBA
select ARM_VIC
select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
- select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_USES_GETTIMEOFFSET
+ select CPU_ARM920T
select NEED_MACH_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
config ARCH_MXC
bool "Freescale MXC/iMX-based"
- select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
config ARCH_MXS
bool "Freescale MXS-based"
- select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK_PREPARE
select MULTI_IRQ_HANDLER
select PINCTRL
config ARCH_NETX
bool "Hilscher NetX based"
+ select ARM_VIC
select CLKSRC_MMIO
select CPU_ARM926T
- select ARM_VIC
select GENERIC_CLOCKEVENTS
help
This enables support for systems based on the Hilscher NetX Soc
config ARCH_H720X
bool "Hynix HMS720x-based"
+ select ARCH_USES_GETTIMEOFFSET
select CPU_ARM720T
select ISA_DMA_API
- select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Hynix HMS720x
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
- select CPU_XSC3
- select PLAT_IOP
- select PCI
select ARCH_SUPPORTS_MSI
- select VMSPLIT_1G
+ select CPU_XSC3
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
+ select PCI
+ select PLAT_IOP
+ select VMSPLIT_1G
help
Support for Intel's IOP13XX (XScale) family of processors.
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select NEED_MACH_GPIO_H
select NEED_RET_TO_USER
- select PLAT_IOP
select PCI
- select ARCH_REQUIRE_GPIOLIB
+ select PLAT_IOP
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select NEED_MACH_GPIO_H
select NEED_RET_TO_USER
- select PLAT_IOP
select PCI
- select ARCH_REQUIRE_GPIOLIB
+ select PLAT_IOP
help
Support for Intel's IOP33X (XScale) family of processors.
bool "IXP4xx-based"
depends on MMU
select ARCH_HAS_DMA_SET_COHERENT_MASK
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_XSCALE
- select ARCH_REQUIRE_GPIOLIB
+ select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H
- select DMABOUNCE if PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_DOVE
bool "Marvell Dove"
- select CPU_V7
select ARCH_REQUIRE_GPIOLIB
+ select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select PLAT_ORION_LEGACY
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
- select CPU_FEROCEON
- select PCI
select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
+ select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell Kirkwood series SoCs:
config ARCH_LPC32XX
bool "NXP LPC32XX"
- select CLKSRC_MMIO
- select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
- select HAVE_IDE
select ARM_AMBA
- select USB_ARCH_HAS_OHCI
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CPU_ARM926T
select GENERIC_CLOCKEVENTS
- select USE_OF
+ select HAVE_IDE
select HAVE_PWM
+ select USB_ARCH_HAS_OHCI
+ select USE_OF
help
Support for the NXP LPC32XX family of processors
config ARCH_MV78XX0
bool "Marvell MV78xx0"
- select CPU_FEROCEON
- select PCI
select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
+ select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
- select CPU_FEROCEON
- select PCI
select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
+ select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell Orion 5x series SoCs:
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select IRQ_DOMAIN
+ select NEED_MACH_GPIO_H
select PLAT_PXA
select SPARSE_IRQ
- select GENERIC_ALLOCATOR
- select NEED_MACH_GPIO_H
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
- select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB
- select NEED_MACH_MEMORY_H
select CLKSRC_MMIO
+ select CPU_ARM922T
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
config ARCH_W90X900
bool "Nuvoton W90X900 CPU"
- select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select CPU_ARM926T
select GENERIC_CLOCKEVENTS
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
config ARCH_TEGRA
bool "NVIDIA Tegra"
+ select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select ARCH_HAS_CPUFREQ
select USE_OF
- select COMMON_CLK
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
- select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
+ select ARCH_MTD_XIP
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_CPU_SUSPEND if PM
+ select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select GPIO_PXA
- select PLAT_PXA
- select SPARSE_IRQ
- select AUTO_ZRELADDR
- select MULTI_IRQ_HANDLER
- select ARM_CPU_SUSPEND if PM
select HAVE_IDE
+ select MULTI_IRQ_HANDLER
select NEED_MACH_GPIO_H
+ select PLAT_PXA
+ select SPARSE_IRQ
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_MSM
bool "Qualcomm MSM"
- select HAVE_CLK
- select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
help
Support for Qualcomm MSM/QSD based systems. This runs on the
apps processor of the MSM/QSD and depends on a shared memory
config ARCH_SHMOBILE
bool "Renesas SH-Mobile / R-Mobile"
- select HAVE_CLK
select CLKDEV_LOOKUP
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
select HAVE_MACH_CLKDEV
select HAVE_SMP
- select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
- select NO_IOPORT
- select SPARSE_IRQ
select MULTI_IRQ_HANDLER
- select PM_GENERIC_DOMAINS if PM
select NEED_MACH_MEMORY_H
+ select NO_IOPORT
+ select PM_GENERIC_DOMAINS if PM
+ select SPARSE_IRQ
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
- select FIQ
select ARCH_MAY_HAVE_PC_FDC
- select HAVE_PATA_PLATFORM
- select ISA_DMA_API
- select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
+ select FIQ
select HAVE_IDE
+ select HAVE_PATA_PLATFORM
+ select ISA_DMA_API
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
+ select NO_IOPORT
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
config ARCH_SA1100
bool "SA1100-based"
- select CLKSRC_MMIO
- select CPU_SA1100
- select ISA
- select ARCH_SPARSEMEM_ENABLE
- select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
+ select ARCH_MTD_XIP
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_SPARSEMEM_ENABLE
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_FREQ
+ select CPU_SA1100
select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
+ select ISA
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
- select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
- select HAVE_CLK
- select CLKDEV_LOOKUP
select ARCH_USES_GETTIMEOFFSET
+ select CLKDEV_LOOKUP
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
config ARCH_S3C64XX
bool "Samsung S3C64XX"
- select PLAT_SAMSUNG
- select CPU_V6
+ select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
select ARM_VIC
+ select CLKDEV_LOOKUP
+ select CPU_V6
select HAVE_CLK
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
- select CLKDEV_LOOKUP
+ select NEED_MACH_GPIO_H
select NO_IOPORT
- select ARCH_USES_GETTIMEOFFSET
- select ARCH_HAS_CPUFREQ
- select ARCH_REQUIRE_GPIOLIB
+ select PLAT_SAMSUNG
+ select S3C_DEV_NAND
+ select S3C_GPIO_TRACK
select SAMSUNG_CLKSRC
+ select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_IRQ_VIC_TIMER
- select S3C_GPIO_TRACK
- select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
- select SAMSUNG_GPIOLIB_4BIT
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select NEED_MACH_GPIO_H
help
Samsung S3C64XX series based systems
config ARCH_S5P64X0
bool "Samsung S5P6440 S5P6450"
- select CPU_V6
- select GENERIC_GPIO
- select HAVE_CLK
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select CPU_V6
select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
help
config ARCH_S5PC100
bool "Samsung S5PC100"
- select GENERIC_GPIO
- select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
select CPU_V7
- select ARCH_USES_GETTIMEOFFSET
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
help
Samsung S5PC100 series based systems
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
- select CPU_V7
- select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
- select GENERIC_GPIO
- select HAVE_CLK
+ select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select ARCH_HAS_CPUFREQ
+ select CPU_V7
select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
config ARCH_EXYNOS
bool "SAMSUNG EXYNOS"
- select CPU_V7
- select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
- select GENERIC_GPIO
- select HAVE_CLK
+ select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
- select ARCH_HAS_CPUFREQ
+ select CPU_V7
select GENERIC_CLOCKEVENTS
- select HAVE_S3C_RTC if RTC_CLASS
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
config ARCH_SHARK
bool "Shark"
+ select ARCH_USES_GETTIMEOFFSET
select CPU_SA110
select ISA
select ISA_DMA
- select ZONE_DMA
- select PCI
- select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
+ select PCI
+ select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
- select CLKSRC_MMIO
- select CPU_ARM926T
- select HAVE_TCM
+ select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
- select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select COMMON_CLK
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
+ select HAVE_TCM
select SPARSE_IRQ
help
Support for ST-Ericsson U300 series mobile platforms.
config ARCH_U8500
bool "ST-Ericsson U8500 Series"
depends on MMU
- select CPU_V7
+ select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
- select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
- select ARCH_HAS_CPUFREQ
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
config ARCH_NOMADIK
bool "STMicroelectronics Nomadik"
+ select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
- select CPU_ARM926T
select COMMON_CLK
+ select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_STN8815
- select MIGHT_HAVE_CACHE_L2X0
- select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
config ARCH_DAVINCI
bool "TI DaVinci"
- select GENERIC_CLOCKEVENTS
+ select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
- select ZONE_DMA
- select HAVE_IDE
select CLKDEV_LOOKUP
select GENERIC_ALLOCATOR
+ select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select ARCH_HAS_HOLES_MEMORYMODEL
+ select HAVE_IDE
select NEED_MACH_GPIO_H
+ select ZONE_DMA
help
Support for TI's DaVinci platform.
config ARCH_OMAP
bool "TI OMAP"
depends on MMU
- select HAVE_CLK
- select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
- select ARCH_HAS_HOLES_MEMORYMODEL
+ select HAVE_CLK
select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
config PLAT_SPEAR
bool "ST SPEAr"
- select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
select CLKDEV_LOOKUP
- select COMMON_CLK
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
config ARCH_VT8500
bool "VIA/WonderMedia 85xx"
- select CPU_ARM926T
- select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
- select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
- select USE_OF
+ select CLKDEV_LOOKUP
select COMMON_CLK
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
select HAVE_CLK
- select CLKDEV_LOOKUP
+ select USE_OF
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
+ select ARM_AMBA
+ select ARM_GIC
+ select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
- select ARM_GIC
- select ARM_AMBA
select ICST
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
config ARCH_MULTI_V4
bool "ARMv4 based platforms (FA526, StrongARM)"
- select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
config ARCH_MULTI_V4T
bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
- select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
config ARCH_MULTI_V5
bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
- select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
config ARCH_MULTI_V4_V5
bool
config ARCH_MULTI_V6
bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
- select CPU_V6
select ARCH_MULTI_V6_V7
+ select CPU_V6
config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
- select CPU_V7
- select ARCH_VEXPRESS
default y
select ARCH_MULTI_V6_V7
+ select ARCH_VEXPRESS
+ select CPU_V7
config ARCH_MULTI_V6_V7
bool
config PLAT_ORION
bool
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
- select COMMON_CLK
config PLAT_ORION_LEGACY
bool
depends on GENERIC_CLOCKEVENTS
depends on HAVE_SMP
depends on MMU
- select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
+ select USE_GENERIC_SMP_HELPERS
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
config USE_OF
bool "Flattened Device Tree support"
+ select IRQ_DOMAIN
select OF
select OF_EARLY_FLATTREE
- select IRQ_DOMAIN
help
Include support for flattened device tree machine descriptions.
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x
default y
- select CPU_FREQ_TABLE
select CPU_FREQ_DEFAULT_GOV_USERSPACE
+ select CPU_FREQ_TABLE
config CPU_FREQ_S3C
bool
config ARM_GIC
+ bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
- bool
config GIC_NON_BANKED
bool
config ARM_VIC
+ bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
- bool
config ARM_VIC_NR
int
config SOC_AT91SAM9
bool
- select GENERIC_CLOCKEVENTS
select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
menu "Atmel AT91 System-on-Chip"
config SOC_AT91SAM9
bool
+ select AT91_SAM9_SMC
+ select AT91_SAM9_TIME
select CPU_ARM926T
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
- select AT91_SAM9_TIME
- select AT91_SAM9_SMC
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_NET_MACB
+ select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
config SOC_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
config SOC_AT91SAM9263
bool "AT91SAM9263"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select SOC_AT91SAM9
config SOC_AT91SAM9RL
bool "AT91SAM9RL"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
config SOC_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10 families"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
config SOC_AT91SAM9X5
bool "AT91SAM9x5 family"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
config SOC_AT91SAM9N12
bool "AT91SAM9N12 family"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
config ARCH_AT91X40
bool "AT91x40"
depends on !MMU
+ select ARCH_USES_GETTIMEOFFSET
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
- select ARCH_USES_GETTIMEOFFSET
endchoice
config ARCH_EDB7211
bool "EDB7211"
- select ISA
- select ARCH_SPARSEMEM_ENABLE
select ARCH_SELECT_MEMORY_MODEL
+ select ARCH_SPARSEMEM_ENABLE
+ select ISA
help
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
evaluation board.
bool
config CP_INTC
- select IRQ_DOMAIN
bool
+ select IRQ_DOMAIN
config ARCH_DAVINCI_DMx
- select CPU_ARM926T
bool
+ select CPU_ARM926T
menu "TI DaVinci Implementations"
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
- select CP_INTC
select ARCH_DAVINCI_DA8XX
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+ select CP_INTC
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
- select CP_INTC
select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
+ select CP_INTC
config ARCH_DAVINCI_DA8XX
- select CPU_ARM926T
bool
+ select CPU_ARM926T
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_TNETV107X
+ bool "TNETV107X based system"
select CPU_V6
select CP_INTC
- bool "TNETV107X based system"
comment "DaVinci Board Type"
bool "TI DM6467 EVM"
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
- select MACH_DAVINCI_DM6467TEVM
select EEPROM_AT24
select I2C
+ select MACH_DAVINCI_DM6467TEVM
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
bool "TI DA830/OMAP-L137/AM17x Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
- select GPIO_PCF857X
select EEPROM_AT24
+ select GPIO_PCF857X
select I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
bool "SAMSUNG EXYNOS4210"
default y
depends on ARCH_EXYNOS4
- select SAMSUNG_DMADEV
select ARM_CPU_SUSPEND if PM
+ select PM_GENERIC_DOMAINS
select S5P_PM if PM
select S5P_SLEEP if PM
- select PM_GENERIC_DOMAINS
+ select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
- select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
help
Enable EXYNOS4212 SoC support
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
- select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
+ select EXYNOS4_DEV_AHCI
+ select EXYNOS4_DEV_USB_OHCI
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
+ select S3C24XX_PWM
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
select S3C_DEV_RTC
+ select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
- select S3C_DEV_I2C1
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS_DEV_DRM
- select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
- select EXYNOS_DEV_DMA
select SAMSUNG_DEV_PWM
- select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select S3C24XX_PWM
help
Machine support for Samsung SMDKV310
config MACH_ARMLEX4210
bool "ARMLEX4210"
select CPU_EXYNOS4210
- select S3C_DEV_RTC
- select S3C_DEV_WDT
+ select EXYNOS4_DEV_AHCI
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS_DEV_DMA
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
- select EXYNOS4_DEV_AHCI
- select EXYNOS_DEV_DMA
- select EXYNOS4_SETUP_SDHCI
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
- select CPU_EXYNOS4210
- select S5P_HRT
select CLKSRC_MMIO
+ select CPU_EXYNOS4210
+ select EXYNOS4_SETUP_FIMC
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C5
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
select HAVE_SCHED_CLOCK
- select S5P_GPIO_INT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_G2D
- select S5P_DEV_CSIS0
- select S5P_DEV_JPEG
- select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_USB_HSOTG
+ select S5P_DEV_CSIS0
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
+ select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
- select EXYNOS_DEV_SYSMMU
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_FIMC
+ select S5P_GPIO_INT
+ select S5P_HRT
select S5P_SETUP_MIPIPHY
- select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
- select S5P_GPIO_INT
- select S3C_DEV_WDT
- select S3C_DEV_RTC
- select S5P_DEV_FIMD0
+ select EXYNOS4_SETUP_FIMC
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C5
+ select EXYNOS4_SETUP_I2C6
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_I2C6
+ select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
select S5P_DEV_CSIS0
- select S5P_DEV_JPEG
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
select S5P_DEV_G2D
+ select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
+ select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
- select EXYNOS4_SETUP_FIMC
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_I2C6
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select S5P_SETUP_MIPIPHY
- select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
config MACH_ORIGEN
bool "ORIGEN"
select CPU_EXYNOS4210
- select S3C_DEV_RTC
- select S3C_DEV_WDT
+ select EXYNOS4_DEV_USB_OHCI
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
+ select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
+ select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
- select EXYNOS_DEV_DRM
- select EXYNOS_DEV_SYSMMU
- select EXYNOS_DEV_DMA
- select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select S3C24XX_PWM
help
Machine support for ORIGEN based on Samsung EXYNOS4210
config MACH_SMDK4212
bool "SMDK4212"
- select SOC_EXYNOS4212
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C7
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
+ select S3C24XX_PWM
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
- select EXYNOS_DEV_SYSMMU
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C7
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select S3C24XX_PWM
+ select SOC_EXYNOS4212
help
Machine support for Samsung SMDK4212
config MACH_SMDK4412
bool "SMDK4412"
- select SOC_EXYNOS4412
select MACH_SMDK4212
+ select SOC_EXYNOS4412
help
Machine support for Samsung SMDK4412
endif
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
- select CPU_EXYNOS4210
- select USE_OF
select ARM_AMBA
+ select CPU_EXYNOS4210
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS4
+ select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
config MACH_EXYNOS5_DT
bool "SAMSUNG EXYNOS5 Machine using device tree"
depends on ARCH_EXYNOS5
+ select ARM_AMBA
select SOC_EXYNOS5250
select USE_OF
- select ARM_AMBA
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
# EBSA285 board in either host or addin mode
config ARCH_EBSA285
- select ARCH_MAY_HAVE_PC_FDC
bool
+ select ARCH_MAY_HAVE_PC_FDC
endif
config ARCH_H7202
bool "hms30c7202"
+ depends on ARCH_H720X
select CPU_H7202
select ZONE_DMA
- depends on ARCH_H720X
help
Say Y here if you are using the Hynix HMS30C7202 Reference Board
config SOC_IMX21
bool
- select MACH_MX21
- select CPU_ARM926T
select COMMON_CLK
+ select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
+ select MACH_MX21
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MX25
+ select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_ARM926T
select HAVE_CAN_FLEXCAN if CAN
- select ARCH_MXC_IOMUX_V3
select MXC_AVIC
config SOC_IMX27
bool
- select MACH_MX27
- select CPU_ARM926T
select COMMON_CLK
+ select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
+ select MACH_MX27
select MXC_AVIC
config SOC_IMX31
bool
+ select COMMON_CLK
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
- select COMMON_CLK
select SMP_ON_UP if SMP
config SOC_IMX35
bool
- select CPU_V6K
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
+ select CPU_V6K
+ select HAVE_CAN_FLEXCAN if CAN
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
- select HAVE_CAN_FLEXCAN if CAN
config SOC_IMX5
- select CPU_V7
- select MXC_TZIC
- select COMMON_CLK
- select ARCH_MXC_IOMUX_V3
+ bool
select ARCH_HAS_CPUFREQ
select ARCH_MX5
- bool
+ select ARCH_MXC_IOMUX_V3
+ select COMMON_CLK
+ select CPU_V7
+ select MXC_TZIC
config SOC_IMX50
bool
- select SOC_IMX5
select ARCH_MX50
+ select SOC_IMX5
config SOC_IMX51
bool
- select SOC_IMX5
select ARCH_MX5
select ARCH_MX51
select PINCTRL
select PINCTRL_IMX51
+ select SOC_IMX5
if ARCH_IMX_V4_V5
config ARCH_MX1ADS
bool "MX1ADS platform"
- select MACH_MXLADS
- select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select MACH_MXLADS
+ select SOC_IMX1
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
config MACH_APF9328
bool "APF9328"
- select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX1
help
Say Yes here if you are using the Armadeus APF9328 development board
config MACH_MX21ADS
bool "MX21ADS platform"
- select SOC_IMX21
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
+ select SOC_IMX21
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
- select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select SOC_IMX25
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
- select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX25
choice
prompt "Baseboard"
config MACH_MX27ADS
bool "MX27ADS platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
+ select SOC_IMX27
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX27
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
+ select SOC_IMX27
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
config MACH_MX27_3DS
bool "MX27PDK platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
+ select SOC_IMX27
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select LEDS_GPIO_REGISTER
+ select SOC_IMX27
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
- select SOC_IMX27
- select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX27
help
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX27
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
+ select SOC_IMX27
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
config MACH_IMX27IPCAM
bool "IMX27 IPCAM platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX27
help
Include support for IMX27 IPCAM platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31ADS
bool "Support MX31ADS platforms"
- select SOC_IMX31
+ default y
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
- default y
+ select SOC_IMX31
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
- select SOC_IMX31
- select MXC_ULPI if USB_ULPI
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
+ select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
- select SOC_IMX31
- select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
config MACH_BUG
bool "Support Buglabs BUGBase platform"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
default y
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
help
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
- select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX35
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX35_3DS
bool "Support MX35PDK platform"
- select SOC_IMX35
- select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select MXC_DEBUG_BOARD
+ select SOC_IMX35
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
- select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX35
help
Include support for Eukrea CPUIMX35 platform. This includes
specific configurations for the board and its peripherals.
config MACH_VPR200
bool "Support VPR200 platform"
- select SOC_IMX35
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select SOC_IMX35
help
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
depends on BROKEN
- select SOC_IMX50
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
+ select SOC_IMX50
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
- select SOC_IMX51
select MACH_MX51_BABBAGE
+ select SOC_IMX51
help
Include support for Freescale i.MX51 based platforms
using the device tree for discovery
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
- select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
+ select SOC_IMX51
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
- select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
+ select SOC_IMX51
help
Include support for MX51PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
- select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
+ select SOC_IMX51
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
config SOC_IMX53
bool "i.MX53 support"
- select SOC_IMX5
select ARCH_MX5
select ARCH_MX53
select HAVE_CAN_FLEXCAN if CAN
select PINCTRL
select PINCTRL_IMX53
+ select SOC_IMX5
help
This enables support for Freescale i.MX53 processor.
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
- select HOTPLUG
select FW_LOADER
+ select HOTPLUG
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
config CPU_PXA168
bool
- select CPU_MOHAWK
select COMMON_CLK
+ select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
- select CPU_MOHAWK
select COMMON_CLK
+ select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
- select CPU_PJ4
select COMMON_CLK
+ select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
- select MACH_TROUT if !MACH_HALIBUT
select ARCH_MSM_ARM11
- select MSM_SMD
- select MSM_SMD_PKG3
select CPU_V6
select GPIO_MSM_V1
+ select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
+ select MSM_SMD
+ select MSM_SMD_PKG3
config ARCH_MSM7X30
bool "MSM7x30"
- select MACH_MSM7X30_SURF # if !
select ARCH_MSM_SCORPION
- select MSM_SMD
- select MSM_VIC
select CPU_V7
- select MSM_GPIOMUX
select GPIO_MSM_V1
+ select MACH_MSM7X30_SURF # if !
+ select MSM_GPIOMUX
select MSM_PROC_COMM
+ select MSM_SMD
+ select MSM_VIC
config ARCH_QSD8X50
bool "QSD8X50"
- select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
select ARCH_MSM_SCORPION
- select MSM_SMD
- select MSM_VIC
select CPU_V7
- select MSM_GPIOMUX
select GPIO_MSM_V1
+ select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
+ select MSM_GPIOMUX
select MSM_PROC_COMM
+ select MSM_SMD
+ select MSM_VIC
endchoice
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
- select MSM_V2_TLMM
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM if SMP
+ select MSM_V2_TLMM
select USE_OF
config ARCH_MSM8960
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
- select MSM_V2_TLMM
select MSM_GPIOMUX
select MSM_SCM if SMP
+ select MSM_V2_TLMM
select USE_OF
config MSM_HAS_DEBUG_UART_HS
config MACH_QSD8X50A_ST1_5
depends on ARCH_QSD8X50
- select MSM_SOC_REV_A
bool "QSD8x50A ST1.5"
+ select MSM_SOC_REV_A
help
Support for the Qualcomm ST1.5.
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
- select NOMADIK_8815
select HAS_MTU
+ select NOMADIK_8815
endmenu
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
depends on PINCTRL_NOMADIK
- select I2C_ALGOBIT
default y
+ select I2C_ALGOBIT
endif
config ARCH_OMAP730
depends on ARCH_OMAP1
bool "OMAP730 Based System"
+ select ARCH_OMAP_OTG
select CPU_ARM926T
select OMAP_MPU_TIMER
- select ARCH_OMAP_OTG
config ARCH_OMAP850
depends on ARCH_OMAP1
bool "OMAP850 Based System"
- select CPU_ARM926T
select ARCH_OMAP_OTG
+ select CPU_ARM926T
config ARCH_OMAP15XX
depends on ARCH_OMAP1
config ARCH_OMAP16XX
depends on ARCH_OMAP1
bool "OMAP16xx Based System"
- select CPU_ARM926T
select ARCH_OMAP_OTG
+ select CPU_ARM926T
comment "OMAP Board Type"
depends on ARCH_OMAP1
config MACH_SX1
bool "Siemens SX1"
- select I2C
depends on ARCH_OMAP1 && ARCH_OMAP15XX
+ select I2C
help
Support for the Siemens SX1 phone. To boot the kernel,
you'll need a SX1 compatible bootloader; check out
bool "Typical OMAP configuration"
default y
select AEABI
- select REGULATOR
- select PM_RUNTIME
- select VFP
- select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
- select SERIAL_OMAP
- select SERIAL_OMAP_CONSOLE
+ select HIGHMEM
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
+ select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+ select PINCTRL
+ select PM_RUNTIME
+ select REGULATOR
+ select SERIAL_OMAP
+ select SERIAL_OMAP_CONSOLE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
- select HIGHMEM
- select PINCTRL
+ select VFP
help
Compile a kernel suitable for booting most boards
bool "TI OMAP3"
depends on ARCH_OMAP2PLUS
default y
- select CPU_V7
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARCH_HAS_OPP
- select PM_RUNTIME if CPU_IDLE
- select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
+ select CPU_V7
select MULTI_IRQ_HANDLER
- select SOC_HAS_OMAP2_SDRC
select OMAP_INTERCONNECT
+ select PM_OPP if PM
+ select PM_RUNTIME if CPU_IDLE
+ select SOC_HAS_OMAP2_SDRC
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
config ARCH_OMAP4
bool "TI OMAP4"
default y
depends on ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+ select ARM_CPU_SUSPEND if PM
+ select ARM_ERRATA_720789
+ select ARM_GIC
select CACHE_L2X0
select CPU_V7
- select ARM_GIC
select HAVE_SMP
select LOCAL_TIMERS if SMP
+ select OMAP_INTERCONNECT
select PL310_ERRATA_588369
select PL310_ERRATA_727915
- select ARM_ERRATA_720789
- select ARCH_HAS_OPP
- select PM_RUNTIME if CPU_IDLE
select PM_OPP if PM
+ select PM_RUNTIME if CPU_IDLE
select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select ARM_CPU_SUSPEND if PM
- select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
- select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
- select CPU_V7
+ select ARM_ARCH_TIMER
+ select ARM_CPU_SUSPEND if PM
select ARM_GIC
+ select CPU_V7
select HAVE_SMP
- select ARM_CPU_SUSPEND if PM
select SOC_HAS_REALTIME_COUNTER
- select ARM_ARCH_TIMER
comment "OMAP Core Type"
depends on ARCH_OMAP2
config SOC_AM33XX
bool "AM33XX support"
default y
- select CPU_V7
select ARM_CPU_SUSPEND if PM
+ select CPU_V7
select MULTI_IRQ_HANDLER
config OMAP_PACKAGE_ZAF
bool "OMAP 2420 H4 board"
depends on SOC_OMAP2420
default y
- select OMAP_PACKAGE_ZAF
select OMAP_DEBUG_DEVICES
+ select OMAP_PACKAGE_ZAF
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
config MACH_OMAP3530_LV_SOM
bool "OMAP3 Logic 3530 LV SOM board"
depends on ARCH_OMAP3
- select OMAP_PACKAGE_CBB
default y
+ select OMAP_PACKAGE_CBB
help
Support for the LogicPD OMAP3530 SOM Development kit
for full description please see the products webpage at
config MACH_OMAP3_TORPEDO
bool "OMAP3 Logic 35x Torpedo board"
depends on ARCH_OMAP3
- select OMAP_PACKAGE_CBB
default y
+ select OMAP_PACKAGE_CBB
help
Support for the LogicPD OMAP35x Torpedo Development kit
for full description please see the products webpage at
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
- select OMAP_PACKAGE_ZAC
select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
+ select OMAP_PACKAGE_ZAC
config MACH_NOKIA_RM680
bool "Nokia RM-680/696 board"
depends on ARCH_OMAP3
default y
- select OMAP_PACKAGE_CBB
select MACH_NOKIA_RM696
+ select OMAP_PACKAGE_CBB
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
- select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBP
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
- select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
bool "IGEP OMAP3 module"
depends on ARCH_OMAP3
default y
- select OMAP_PACKAGE_CBB
select MACH_IGEP0020
+ select OMAP_PACKAGE_CBB
config MACH_SBC3530
bool "OMAP3 SBC STALKER board"
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
default y
select CPU_V7
- select ZONE_DMA
select SIRF_IRQ
+ select ZONE_DMA
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
- select PXA3xx
select CPU_PXA300
- select POWER_SUPPLY
select HAVE_PWM
+ select POWER_SUPPLY
+ select PXA3xx
select USE_OF
help
Include support for Marvell PXA3xx based platforms using
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_ZYLONITE
bool
- select PXA3xx
select HAVE_PWM
+ select PXA3xx
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
+ select PXA3xx
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
- select PXA3xx
select CPU_PXA930
+ select PXA3xx
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
- select PXA3xx
select CPU_PXA930
+ select PXA3xx
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
- select PXA25x
- select ISA
- select I2C_GPIO
+ select ARCOM_PCMCIA
select HAVE_PWM
+ select I2C_GPIO
+ select ISA
+ select PXA25x
select PXA_HAVE_ISA_IRQS
- select ARCOM_PCMCIA
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
- select PXA27x
+ select ARCOM_PCMCIA
select ISA
+ select PXA27x
select PXA_HAVE_ISA_IRQS
- select ARCOM_PCMCIA
config MACH_BALLOON3
bool "Balloon 3 board"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
- select PXA27x
select IWMMXT
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
- select PXA27x
select IWMMXT
- select PXA25x
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H if PCI
+ select PXA25x
+ select PXA27x
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
select HAVE_PWM
+ select PXA3xx
config MACH_CAPC7117
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_XCEP
bool "Iskratel Electronics XCEP"
- select PXA25x
select MTD
- select MTD_PHYSMAP
- select MTD_CFI_INTELEXT
select MTD_CFI
+ select MTD_CFI_INTELEXT
select MTD_CHAR
+ select MTD_PHYSMAP
+ select PXA25x
select SMC91X
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
select PXA27x
+ select TRIZEPS_PCMCIA
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
select PXA27x
+ select TRIZEPS_PCMCIA
choice
prompt "Select base board for Trizeps module"
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
- select HAVE_PWM
depends on MACH_PCM027
+ select HAVE_PWM
choice
prompt "display on pcm990"
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
+ select PXA3xx
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
- select PXA3xx
select CPU_PXA320
+ select PXA3xx
config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
config MACH_VPAC270
bool "Voipac PXA270"
- select PXA27x
select HAVE_PATA_PLATFORM
+ select PXA27x
help
PXA270 based Single Board Computer.
config MACH_H4700
bool "HP iPAQ hx4700"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_H5000
bool "HP iPAQ h5000"
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
- select PXA27x
- select IWMMXT
- select HAVE_PWM
select GPIO_SYSFS
+ select HAVE_PWM
+ select IWMMXT
+ select PXA27x
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
config PXA_EZX
bool "Motorola EZX Platform"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_EZX_A780
bool "Motorola EZX A780"
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
- select MACH_PALM27X
- select PXA27x
select IWMMXT
+ select MACH_PALM27X
select PALM_TREO
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
- select MACH_PALM27X
- select PXA27x
select IWMMXT
+ select MACH_PALM27X
select PALM_TREO
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
- select PXA3xx
select CPU_PXA300
- select POWER_SUPPLY
select HAVE_PWM
+ select POWER_SUPPLY
+ select PXA3xx
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
+ select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
- select CPU_PXA300
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
+ select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
- select CPU_PXA300
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
- select SHARP_SCOOP
select SHARP_PARAM
+ select SHARP_SCOOP
help
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
- select MACH_SPITZ
select I2C
select I2C_PXA
+ select MACH_SPITZ
+ select PXA27x
+ select PXA_SHARP_Cxx00
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
- select PXA25x
select FB_W100
+ select PXA25x
config MACH_E330
bool "Toshiba e330"
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
- select PXA27x
select HAVE_PWM
+ select PXA27x
endif
endmenu
config SHARPSL_PM_MAX1111
bool
select HWMON
+ select SENSORS_MAX1111
select SPI
select SPI_MASTER
- select SENSORS_MAX1111
config PXA_HAVE_ISA_IRQS
bool
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore Tile"
depends on MACH_REALVIEW_EB
- select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
+ select CPU_V6K
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
config MACH_REALVIEW_PB11MP
bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
- select CPU_V6K
+ select ARCH_HAS_BARRIERS if SMP
select ARM_GIC
+ select CPU_V6K
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select ARCH_HAS_BARRIERS if SMP
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
the ARM11MPCore. This platform has an on-board ARM11MPCore and has
# ARMv6 CPU without K extensions, but does have the new exclusive ops
config MACH_REALVIEW_PB1176
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
- select CPU_V6
select ARM_GIC
+ select CPU_V6
select HAVE_TCM
select MIGHT_HAVE_CACHE_L2X0
help
config MACH_REALVIEW_PBA8
bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
- select CPU_V7
select ARM_GIC
+ select CPU_V7
select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Platform Baseboard for
config MACH_REALVIEW_PBX
bool "Support RealView(R) Platform Baseboard Explore"
+ select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ARM_GIC
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM
help
Include support for the ARM(R) RealView(R) Platform Baseboard
config S3C2412_CPUFREQ
bool
depends on CPU_FREQ_S3C24XX && CPU_S3C2412
- select S3C2412_IOTIMING
default y
+ select S3C2412_IOTIMING
help
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
config S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- select S3C2410_CPUFREQ_UTILS
default y
+ select S3C2410_CPUFREQ_UTILS
help
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
bool "SAMSUNG S3C2410"
default y
select CPU_ARM920T
- select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
- select S3C2410_PM if PM
+ select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+ select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
- select S3C2412_PM if PM
select S3C2412_DMA if S3C24XX_DMA
+ select S3C2412_PM if PM
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
- select SAMSUNG_CLKSRC
+ select S3C2416_PM if PM
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
- select S3C2416_PM if PM
+ select SAMSUNG_CLKSRC
help
Support for the S3C2416 SoC from the S3C24XX line
depends on ARCH_S3C24XX
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select SAMSUNG_CLKSRC
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
+ select SAMSUNG_CLKSRC
help
Support for the S3C2443 SoC from the S3C24XX line
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
+ select ISA
+ select MACH_BAST_IDE
select S3C2410_IOTIMING if S3C2410_CPUFREQ
- select S3C24XX_SIMTEC_PM if PM
+ select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
+ select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
- select MACH_BAST_IDE
- select S3C24XX_DCLK
- select ISA
select S3C_DEV_HWMON
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
config ARCH_H1940
bool "IPAQ H1940"
select PM_H1940 if PM
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
select S3C24XX_SETUP_TS
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the HP IPAQ H1940
config MACH_N30
bool "Acer N30 family"
select MACH_N35
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
config MACH_OTOM
bool "NexVision OTOM Board"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision OTOM board
config MACH_QT2410
bool "QT2410"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Armzone QT2410
config MACH_VR1000
bool "Thorcom VR1000"
- select S3C24XX_SIMTEC_PM if PM
+ select MACH_BAST_IDE
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
- select MACH_BAST_IDE
- select S3C_DEV_USB_HOST
+ select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
config MACH_JIVE
bool "Logitech Jive"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Logitech Jive.
bool "SMDK2413"
select MACH_S3C2413
select S3C24XX_SMDK
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2413
config MACH_VSTMS
bool "VMSTMS"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an VSTMS board
config MACH_SMDK2416
bool "SMDK2416"
+ select S3C2416_SETUP_SDHCI
select S3C24XX_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
- select S3C2416_SETUP_SDHCI
help
Say Y here if you are using an SMDK2416
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
- select S3C24XX_DCLK
- select S3C24XX_SIMTEC_PM if PM
select HAVE_PATA_PLATFORM
- select S3C24XX_GPIO_EXTRA64
select S3C2440_XTAL_12000000
+ select S3C24XX_DCLK
+ select S3C24XX_GPIO_EXTRA64
+ select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select EEPROM_AT24
- select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
+ select NEW_LEDS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2440_XTAL_12000000
select S3C24XX_DCLK
- select S3C24XX_SIMTEC_PM if PM
select S3C24XX_GPIO_EXTRA128
- select S3C2440_XTAL_12000000
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
- select S3C_DEV_USB_HOST
+ select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
config MACH_RX3715
bool "HP iPAQ rx3715"
- select S3C2440_XTAL_16934400
select PM_H1940 if PM
+ select S3C2440_XTAL_16934400
select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
bool "SMDK2440"
select S3C2440_XTAL_16934400
select S3C24XX_SMDK
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the SMDK2440.
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
+ select I2C
+ select MACH_NEO1973
select MFD_PCF50633
select PCF50633_GPIO
- select I2C
select POWER_SUPPLY
- select MACH_NEO1973
select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
config MACH_RX1950
bool "HP iPAQ rx1950"
- select S3C24XX_DCLK
- select PM_H1940 if PM
select I2C
- select S3C24XX_PWM
- select S3C_DEV_NAND
+ select PM_H1940 if PM
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
+ select S3C24XX_DCLK
+ select S3C24XX_PWM
+ select S3C_DEV_NAND
help
Say Y here if you're using HP iPAQ rx1950
config PLAT_S3C64XX
bool
depends on ARCH_S3C64XX
- select SAMSUNG_WAKEMASK
- select PM_GENERIC_DOMAINS
default y
+ select PM_GENERIC_DOMAINS
+ select SAMSUNG_WAKEMASK
help
Base platform code for any Samsung S3C64XX device
select S3C_DMA
config S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_SDHCI_GPIO
bool
+ select S3C64XX_SETUP_SDHCI_GPIO
help
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
config MACH_SMDK6400
bool "SMDK6400"
select CPU_S3C6400
+ select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC
select S3C_DEV_NAND
- select S3C64XX_SETUP_SDHCI
help
Machine support for the Samsung SMDK6400
config MACH_ANW6410
bool "A&W6410"
select CPU_S3C6410
- select S3C_DEV_FB
select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_FB
help
Machine support for the A&W6410
config MACH_MINI6410
bool "MINI6410"
select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
- select S3C_DEV_FB
- select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
help
config MACH_REAL6410
bool "REAL6410"
select CPU_S3C6410
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C_DEV_FB
- select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
- select S3C_DEV_USB_HOST
help
Machine support for the CoreWind REAL6410
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
- select SAMSUNG_DEV_ADC
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
+ select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
- select SAMSUNG_DEV_IDE
- select S3C_DEV_FB
select S3C_DEV_RTC
- select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_USB_PHY
+ select SAMSUNG_DEV_TS
help
Machine support for the Samsung SMDK6410
config SMDK6410_WM1190_EV1
bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
depends on MACH_SMDK6410
- select REGULATOR
- select REGULATOR_WM8350
- select SAMSUNG_GPIO_EXTRA64
- select MFD_WM8350_I2C
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8350_CONFIG_MODE_3
+ select MFD_WM8350_I2C
select MFD_WM8352_CONFIG_MODE_0
+ select REGULATOR
+ select REGULATOR_WM8350
+ select SAMSUNG_GPIO_EXTRA64
help
The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
and audio daughtercard for the Samsung SMDK6410 reference
config SMDK6410_WM1192_EV1
bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
depends on MACH_SMDK6410
+ select MFD_WM831X
+ select MFD_WM831X_I2C
select REGULATOR
select REGULATOR_WM831X
select SAMSUNG_GPIO_EXTRA64
- select MFD_WM831X
- select MFD_WM831X_I2C
help
The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
daughtercard for the Samsung SMDK6410 reference platform.
config MACH_NCP
bool "NCP"
select CPU_S3C6410
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC1
select S3C64XX_SETUP_I2C1
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_I2C1
help
Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
- select S3C64XX_SETUP_FB_24BPP
select SAMSUNG_DEV_PWM
help
Machine support for the Airgoo HMT
config MACH_SMARTQ
bool
select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
- select S3C_DEV_FB
select S3C_DEV_HWMON
select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
select S3C_DEV_USB_HOST
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
select CPU_S3C6410
- select S3C64XX_SETUP_SDHCI
+ select I2C
+ select LEDS_GPIO_REGISTER
+ select S3C64XX_DEV_SPI0
+ select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_SPI
select S3C64XX_SETUP_USB_PHY
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_KEYPAD
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
- select S3C_DEV_WDT
select S3C_DEV_RTC
- select S3C64XX_DEV_SPI0
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_KEYPAD
select SAMSUNG_GPIO_EXTRA128
- select I2C
- select LEDS_GPIO_REGISTER
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
config CPU_S5P6440
bool
- select SAMSUNG_DMADEV
select S5P_HRT
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select SAMSUNG_DMADEV
select S5P_HRT
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6450 CPU support
bool "SMDK6440"
select CPU_S5P6440
select S3C_DEV_FB
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S5P64X0_SETUP_FB_24BPP
+ select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
- select S5P64X0_SETUP_FB_24BPP
- select S5P64X0_SETUP_I2C1
- select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6440
bool "SMDK6450"
select CPU_S5P6450
select S3C_DEV_FB
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S5P64X0_SETUP_FB_24BPP
+ select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
- select S5P64X0_SETUP_FB_24BPP
- select S5P64X0_SETUP_I2C1
- select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6450
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
select S5PC100_SETUP_FB_24BPP
select S5PC100_SETUP_I2C1
select S5PC100_SETUP_IDE
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_IDE
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_TS
help
Machine support for the Samsung SMDKC100
config CPU_S5PV210
bool
- select SAMSUNG_DMADEV
select S5P_EXT_INT
select S5P_HRT
select S5P_PM if PM
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
help
Enable S5PV210 CPU support
bool "Aquila"
select CPU_S5PV210
select S3C_DEV_FB
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
- select S5P_DEV_ONENAND
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_USB_PHY
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_ONENAND
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
config MACH_GONI
bool "GONI"
select CPU_S5PV210
- select S5P_GPIO_INT
select S3C_DEV_FB
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_I2C2
- select S5P_DEV_MFC
select S3C_DEV_USB_HSOTG
- select S5P_DEV_ONENAND
- select SAMSUNG_DEV_KEYPAD
- select S5P_DEV_TV
select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_FIMC
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
- select S5PV210_SETUP_FIMC
select S5PV210_SETUP_USB_PHY
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_MFC
+ select S5P_DEV_ONENAND
+ select S5P_DEV_TV
+ select S5P_GPIO_INT
+ select SAMSUNG_DEV_KEYPAD
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_IDE
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_MFC
select SAMSUNG_DEV_IDE
- select S5PV210_SETUP_I2C1
- select S5PV210_SETUP_I2C2
- select S5PV210_SETUP_IDE
help
Machine support for Samsung SMDKC110
S5PC110(MCP) is one of package option of S5PV210
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
+ select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_IDE
+ select S5PV210_SETUP_KEYPAD
+ select S5PV210_SETUP_SDHCI
+ select S5PV210_SETUP_USB_PHY
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
- select S5PV210_SETUP_FB_24BPP
- select S5PV210_SETUP_I2C1
- select S5PV210_SETUP_I2C2
- select S5PV210_SETUP_IDE
- select S5PV210_SETUP_KEYPAD
- select S5PV210_SETUP_SDHCI
- select S5PV210_SETUP_USB_PHY
help
Machine support for Samsung SMDKV210
config MACH_TORBRECK
bool "Torbreck"
- select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
+ select CPU_S5PV210
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
bool "Sharp Zaurus SL5500"
# FIXME: select CPU_FREQ_SA11x0
select SHARP_LOCOMO
- select SHARP_SCOOP
select SHARP_PARAM
+ select SHARP_SCOOP
help
Say Y here to support the Sharp Zaurus SL5500 PDAs.
config SA1100_H3100
bool "Compaq iPAQ H3100"
- select HTC_EGPIO
select CPU_FREQ_SA1110
+ select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
- select HTC_EGPIO
select CPU_FREQ_SA1110
+ select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
- select SA1111
select CPU_FREQ_SA1100
+ select SA1111
help
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
config SA1100_JORNADA720
bool "HP Jornada 720"
- select SA1111
# FIXME: select CPU_FREQ_SA11x0
+ select SA1111
help
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See
config SA1100_JORNADA720_SSP
bool "HP Jornada 720 Extended SSP driver"
- select SA1100_SSP
depends on SA1100_JORNADA720
+ select SA1100_SSP
help
Say Y here if you have a HP Jornada 7xx handheld computer and you
want to access devices connected to the MCU. Those include the
config ARCH_SH7367
bool "SH-Mobile G3 (SH7367)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V6
select SH_CLK_CPG
- select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_SH7377
bool "SH-Mobile G4 (SH7377)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V7
select SH_CLK_CPG
- select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
- select CPU_V7
- select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_CPU_SUSPEND if PM || CPU_IDLE
+ select CPU_V7
+ select SH_CLK_CPG
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
- select CPU_V7
- select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
+ select CPU_V7
select I2C
+ select SH_CLK_CPG
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V7
select SH_CLK_CPG
- select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_GIC
select CPU_V7
select SH_CLK_CPG
- select ARM_GIC
- select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_EMEV2
bool "Emma Mobile EV2"
- select CPU_V7
- select ARM_GIC
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_GIC
+ select CPU_V7
comment "SH-Mobile Board Type"
bool "AP4EVB board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
choice
prompt "AP4EVB LCD panel selection"
config MACH_AG5EVM
bool "AG5EVM board"
+ depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
- select SH_LCD_MIPI_DSI
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on ARCH_SH73A0
+ select SH_LCD_MIPI_DSI
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SND_SOC_AK4642 if SND_SIMPLE_CARD
config MACH_KOTA2
bool "KOTA2 board"
+ depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on ARCH_SH73A0
config MACH_BONITO
bool "bonito board"
+ depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on ARCH_R8A7740
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
- select USE_OF
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_WM8978 if SND_SIMPLE_CARD
+ select USE_OF
config MACH_MARZEN
bool "MARZEN board"
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
- select USE_OF
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select USE_OF
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
- select USE_OF
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select USE_OF
comment "SH-Mobile System Configuration"
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
- select CPU_V7
- select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
- select PINCTRL
- select PINCTRL_TEGRA20
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB
- select USB_ULPI_VIEWPORT if USB_SUPPORT
select ARM_ERRATA_720789
select ARM_ERRATA_742230
select ARM_ERRATA_751472
select ARM_ERRATA_754327
select ARM_ERRATA_764369 if SMP
+ select ARM_GIC
+ select CPU_FREQ_TABLE if CPU_FREQ
+ select CPU_V7
+ select PINCTRL
+ select PINCTRL_TEGRA20
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
- select CPU_FREQ_TABLE if CPU_FREQ
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ select USB_ULPI if USB
+ select USB_ULPI_VIEWPORT if USB_SUPPORT
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
config ARCH_TEGRA_3x_SOC
bool "Enable support for Tegra30 family"
- select CPU_V7
- select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
- select PINCTRL
- select PINCTRL_TEGRA30
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB
- select USB_ULPI_VIEWPORT if USB_SUPPORT
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
- select PL310_ERRATA_769419 if CACHE_L2X0
+ select ARM_GIC
select CPU_FREQ_TABLE if CPU_FREQ
+ select CPU_V7
+ select PINCTRL
+ select PINCTRL_TEGRA30
+ select PL310_ERRATA_769419 if CACHE_L2X0
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ select USB_ULPI if USB
+ select USB_ULPI_VIEWPORT if USB_SUPPORT
help
Support for NVIDIA Tegra T30 processor family, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
config MACH_U300
bool "U300"
select PINCTRL
- select PINCTRL_U300
select PINCTRL_COH901
+ select PINCTRL_U300
comment "ST-Ericsson U300/U335 Feature Selections"
config UX500_SOC_COMMON
bool
default y
- select ARM_GIC
- select HAS_MTU
- select PL310_ERRATA_753970 if CACHE_PL310
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
+ select ARM_GIC
select CACHE_L2X0
+ select COMMON_CLK
+ select HAS_MTU
select PINCTRL
select PINCTRL_NOMADIK
- select COMMON_CLK
+ select PL310_ERRATA_753970 if CACHE_PL310
config UX500_SOC_DB8500
bool
+ select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
+ select PINCTRL_DB8500
select REGULATOR
select REGULATOR_DB8500_PRCMU
- select CPU_FREQ_TABLE if CPU_FREQ
- select PINCTRL_DB8500
menu "Ux500 target platform (boards)"
config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
- select UX500_SOC_DB8500
select I2C
select I2C_NOMADIK
- select SOC_BUS
select REGULATOR_FIXED_VOLTAGE
+ select SOC_BUS
+ select UX500_SOC_DB8500
help
Include support for the MOP500 development platform.
config ARCH_VERSATILE_PB
bool "Support Versatile Platform Baseboard for ARM926EJ-S"
+ default y
select CPU_ARM926T
select MIGHT_HAVE_PCI
- default y
help
Include support for the ARM(R) Versatile Platform Baseboard
for the ARM926EJ-S.
config MACH_VERSATILE_DT
bool "Support Versatile platform from device tree"
- select USE_OF
select CPU_ARM926T
+ select USE_OF
help
Include support for the ARM(R) Versatile/PB platform,
using the device tree for discovery
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4
+ select CPU_PABRT_LEGACY
help
A 32-bit RISC microprocessor based on the ARM7 processor core
which has no memory control unit and cache.
bool "Support ARM720T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WT if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WT if MMU
help
A 32-bit RISC processor with 8kByte Cache, Write Buffer and
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V3 # although the core is v4t
select CPU_CP15_MPU
+ select CPU_PABRT_LEGACY
help
A 32-bit RISC processor with 8KB cache or 4KB variants,
write buffer and MPU(Protection Unit) built around
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4
+ select CPU_PABRT_LEGACY
help
A 32-bit RISC microprocessor based on the ARM9 processor core
which has no memory control unit and cache.
bool "Support ARM920T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
bool "Support ARM922T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM922T is a version of the ARM920T, but with smaller
bool "Support ARM925T processor" if ARCH_OMAP1
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM925T is a mix between the ARM920T and ARM926T, but with
bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v5
select CPU_ABRT_EV5TJ
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
This is a variant of the ARM920. It has slightly different
bool
select CPU_32v4
select CPU_ABRT_EV4
- select CPU_PABRT_LEGACY
- select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_CACHE_FA
+ select CPU_CACHE_VIVT
select CPU_COPY_FA if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_FA if MMU
help
The FA526 is a version of the ARMv4 compatible processor with
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
+ select CPU_PABRT_LEGACY
help
ARM940T is a member of the ARM9TDMI family of general-
purpose microprocessors with MPU and separate 4KB
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
+ select CPU_PABRT_LEGACY
help
ARM946E-S is a member of the ARM9E-S family of high-
performance, 32-bit system-on-chip processor solutions.
bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1020 is the 32K cached version of the ARM10 processor,
# ARM1020E - needs validating
config CPU_ARM1020E
bool "Support ARM1020E processor" if ARCH_INTEGRATOR
+ depends on n
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
- depends on n
# ARM1022E
config CPU_ARM1022
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1022E is an implementation of the ARMv5TE architecture
bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
select CPU_ABRT_EV4
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WB if MMU
help
The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
bool
select CPU_32v4
select CPU_ABRT_EV4
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WB if MMU
# XScale
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
# XScale Core Version 3
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
select IO_36
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
+ select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
- select CPU_COPY_V4WB if MMU
# Feroceon
config CPU_FEROCEON
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_FEROCEON if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_FEROCEON if MMU
config CPU_FEROCEON_OLD_ID
# Marvell PJ4
config CPU_PJ4
bool
- select CPU_V7
select ARM_THUMBEE
+ select CPU_V7
# ARMv6
config CPU_V6
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
- select CPU_PABRT_V6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
+ select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
- select CPU_COPY_V6 if MMU
+ select CPU_PABRT_V6
select CPU_TLB_V6 if MMU
# ARMv6k
select CPU_32v6
select CPU_32v6K
select CPU_ABRT_EV6
- select CPU_PABRT_V6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
+ select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
- select CPU_COPY_V6 if MMU
+ select CPU_PABRT_V6
select CPU_TLB_V6 if MMU
# ARMv7
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
- select CPU_PABRT_V7
select CPU_CACHE_V7
select CPU_CACHE_VIPT
+ select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
- select CPU_COPY_V6 if MMU
+ select CPU_PABRT_V7
select CPU_TLB_V7 if MMU
# Figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v3
bool
- select TLS_REG_EMUL if SMP || !MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
+ select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4
bool
- select TLS_REG_EMUL if SMP || !MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
+ select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4T
bool
- select TLS_REG_EMUL if SMP || !MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
+ select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v5
bool
- select TLS_REG_EMUL if SMP || !MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
+ select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v6
bool
- select TLS_REG_EMUL if !CPU_32v6K && !MMU
select CPU_USE_DOMAINS if CPU_V6 && MMU
+ select TLS_REG_EMUL if !CPU_32v6K && !MMU
config CPU_32v6K
bool
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
depends on !CPU_USE_DOMAINS && CPU_V7
- select HAVE_PROC_CPU if PROC_FS
default y if SMP
+ select HAVE_PROC_CPU if PROC_FS
help
ARMv6 architecture deprecates use of the SWP/SWPB instructions.
ARMv7 multiprocessing extensions introduce the ability to disable
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
- select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
help
This enables support for systems based on the Freescale i.MX ARMv4
and ARMv5 SoCs
config ARCH_IMX_V6_V7
bool "i.MX3, i.MX5, i.MX6"
- select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
select MIGHT_HAVE_CACHE_L2X0
help
This enables support for systems based on the Freescale i.MX3, i.MX5
default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
config IMX_HAVE_PLATFORM_FLEXCAN
- select HAVE_CAN_FLEXCAN if CAN
bool
+ select HAVE_CAN_FLEXCAN if CAN
config IMX_HAVE_PLATFORM_FSL_USB2_UDC
bool
config PLAT_NOMADIK
bool
depends on ARCH_NOMADIK || ARCH_U8500
- select CLKSRC_MMIO
default y
+ select CLKSRC_MMIO
help
Common platform code for Nomadik and other ST-Ericsson
platforms.
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
select HAVE_IDE
- select NEED_MACH_MEMORY_H
+ select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
+ select NEED_MACH_MEMORY_H
help
"Systems based on omap7xx, omap15xx or omap16xx"
bool "TI OMAP2/3/4"
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
- select SPARSE_IRQ
select OMAP_DM_TIMER
- select USE_OF
select PROC_DEVICETREE if PROC_FS
+ select SPARSE_IRQ
+ select USE_OF
help
"Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
config OMAP_DEBUG_LEDS
def_bool y if NEW_LEDS
- select LEDS_CLASS
depends on OMAP_DEBUG_DEVICES
+ select LEDS_CLASS
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
bool
depends on ARCH_S3C24XX
default y
- select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select NO_IOPORT
select S3C_DEV_NAND
help
Base platform code for any Samsung S3C24XX device
config PLAT_SAMSUNG
bool
depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
- select NO_IOPORT
- select GENERIC_IRQ_CHIP
default y
+ select GENERIC_IRQ_CHIP
+ select NO_IOPORT
help
Base platform code for all Samsung SoC based systems
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
- select ARM_VIC if !ARCH_EXYNOS
+ select ARCH_REQUIRE_GPIOLIB
select ARM_GIC if ARCH_EXYNOS
+ select ARM_VIC if !ARCH_EXYNOS
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
+ select PLAT_SAMSUNG
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
- select SAMSUNG_GPIOLIB_4BIT
- select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
+ select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_IRQ_VIC_TIMER
help
Base platform code for Samsung's S5P series SoC.
config SAMSUNG_DMADEV
bool
+ select ARM_AMBA
select DMADEVICES
select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
CPU_S5P6450 || CPU_S5P6440)
- select ARM_AMBA
help
Use DMA device engine for PL330 DMAC.
bool "ST SPEAr13xx with Device Tree"
select ARM_GIC
select CPU_V7
- select USE_OF
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
+ select USE_OF
help
Supports for ARM's SPEAR13XX family
bool "ST SPEAr3xx with Device Tree"
select ARM_VIC
select CPU_ARM926T
- select USE_OF
select PINCTRL
+ select USE_OF
help
Supports for ARM's SPEAR3XX family
projects / karo-tx-linux.git / commitdiff