]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
spi:Add Freescale DSPI driver for Vybrid VF610 platform
authorChao Fu <B44548@freescale.com>
Fri, 16 Aug 2013 03:08:55 +0000 (11:08 +0800)
committerMark Brown <broonie@linaro.org>
Thu, 22 Aug 2013 10:33:13 +0000 (11:33 +0100)
The serial peripheral interface (SPI) module implemented on Freescale Vybrid
platform provides a synchronous serial bus for communication between Vybrid
and the external peripheral device.
The SPI supports full-duplex, three-wire synchronous transfer, has TX/RX FIFO
with depth of four entries.

This driver is the SPI master mode driver and has been tested on Vybrid
VF610TWR board.

Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Chao Fu <b44548@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
drivers/spi/Kconfig
drivers/spi/Makefile
drivers/spi/spi-fsl-dspi.c [new file with mode: 0644]

index 89cbbabaff44c66771efc3f26b18e9b4565a4cc3..b9da6509c5e5a3e5835c106b91dff4d9b49ffe47 100644 (file)
@@ -248,6 +248,13 @@ config SPI_FSL_SPI
          This also enables using the Aeroflex Gaisler GRLIB SPI controller in
          master mode.
 
+config SPI_FSL_DSPI
+       tristate "Freescale DSPI controller"
+       select SPI_BITBANG
+       help
+         This enables support for the Freescale DSPI controller in master
+         mode. VF610 platform uses the controller.
+
 config SPI_FSL_ESPI
        bool "Freescale eSPI controller"
        depends on FSL_SOC
index 33f9c09561e799051fb257f53f6161961cb734e7..3441e0da405ab663d0fc97e4f01eabdc9b67b030 100644 (file)
@@ -30,6 +30,7 @@ spi-dw-midpci-objs                    := spi-dw-pci.o spi-dw-mid.o
 obj-$(CONFIG_SPI_EP93XX)               += spi-ep93xx.o
 obj-$(CONFIG_SPI_FALCON)               += spi-falcon.o
 obj-$(CONFIG_SPI_FSL_CPM)              += spi-fsl-cpm.o
+obj-$(CONFIG_SPI_FSL_DSPI)             += spi-fsl-dspi.o
 obj-$(CONFIG_SPI_FSL_LIB)              += spi-fsl-lib.o
 obj-$(CONFIG_SPI_FSL_ESPI)             += spi-fsl-espi.o
 obj-$(CONFIG_SPI_FSL_SPI)              += spi-fsl-spi.o
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
new file mode 100644 (file)
index 0000000..6cd07d1
--- /dev/null
@@ -0,0 +1,557 @@
+/*
+ * drivers/spi/spi-fsl-dspi.c
+ *
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Freescale DSPI driver
+ * This file contains a driver for the Freescale DSPI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#define DRIVER_NAME "fsl-dspi"
+
+#define TRAN_STATE_RX_VOID             0x01
+#define TRAN_STATE_TX_VOID             0x02
+#define TRAN_STATE_WORD_ODD_NUM        0x04
+
+#define DSPI_FIFO_SIZE                 4
+
+#define SPI_MCR                0x00
+#define SPI_MCR_MASTER         (1 << 31)
+#define SPI_MCR_PCSIS          (0x3F << 16)
+#define SPI_MCR_CLR_TXF        (1 << 11)
+#define SPI_MCR_CLR_RXF        (1 << 10)
+
+#define SPI_TCR                        0x08
+
+#define SPI_CTAR(x)            (0x0c + (x * 4))
+#define SPI_CTAR_FMSZ(x)       (((x) & 0x0000000f) << 27)
+#define SPI_CTAR_CPOL(x)       ((x) << 26)
+#define SPI_CTAR_CPHA(x)       ((x) << 25)
+#define SPI_CTAR_LSBFE(x)      ((x) << 24)
+#define SPI_CTAR_PCSSCR(x)     (((x) & 0x00000003) << 22)
+#define SPI_CTAR_PASC(x)       (((x) & 0x00000003) << 20)
+#define SPI_CTAR_PDT(x)        (((x) & 0x00000003) << 18)
+#define SPI_CTAR_PBR(x)        (((x) & 0x00000003) << 16)
+#define SPI_CTAR_CSSCK(x)      (((x) & 0x0000000f) << 12)
+#define SPI_CTAR_ASC(x)        (((x) & 0x0000000f) << 8)
+#define SPI_CTAR_DT(x)         (((x) & 0x0000000f) << 4)
+#define SPI_CTAR_BR(x)         ((x) & 0x0000000f)
+
+#define SPI_CTAR0_SLAVE        0x0c
+
+#define SPI_SR                 0x2c
+#define SPI_SR_EOQF            0x10000000
+
+#define SPI_RSER               0x30
+#define SPI_RSER_EOQFE         0x10000000
+
+#define SPI_PUSHR              0x34
+#define SPI_PUSHR_CONT         (1 << 31)
+#define SPI_PUSHR_CTAS(x)      (((x) & 0x00000007) << 28)
+#define SPI_PUSHR_EOQ          (1 << 27)
+#define SPI_PUSHR_CTCNT        (1 << 26)
+#define SPI_PUSHR_PCS(x)       (((1 << x) & 0x0000003f) << 16)
+#define SPI_PUSHR_TXDATA(x)    ((x) & 0x0000ffff)
+
+#define SPI_PUSHR_SLAVE        0x34
+
+#define SPI_POPR               0x38
+#define SPI_POPR_RXDATA(x)     ((x) & 0x0000ffff)
+
+#define SPI_TXFR0              0x3c
+#define SPI_TXFR1              0x40
+#define SPI_TXFR2              0x44
+#define SPI_TXFR3              0x48
+#define SPI_RXFR0              0x7c
+#define SPI_RXFR1              0x80
+#define SPI_RXFR2              0x84
+#define SPI_RXFR3              0x88
+
+#define SPI_FRAME_BITS(bits)   SPI_CTAR_FMSZ((bits) - 1)
+#define SPI_FRAME_BITS_MASK    SPI_CTAR_FMSZ(0xf)
+#define SPI_FRAME_BITS_16      SPI_CTAR_FMSZ(0xf)
+#define SPI_FRAME_BITS_8       SPI_CTAR_FMSZ(0x7)
+
+#define SPI_CS_INIT            0x01
+#define SPI_CS_ASSERT          0x02
+#define SPI_CS_DROP            0x04
+
+struct chip_data {
+       u32 mcr_val;
+       u32 ctar_val;
+       u16 void_write_data;
+};
+
+struct fsl_dspi {
+       struct spi_bitbang      bitbang;
+       struct platform_device  *pdev;
+
+       void                    *base;
+       int                     irq;
+       struct clk              *clk;
+
+       struct spi_transfer     *cur_transfer;
+       struct chip_data        *cur_chip;
+       size_t                  len;
+       void                    *tx;
+       void                    *tx_end;
+       void                    *rx;
+       void                    *rx_end;
+       char                    dataflags;
+       u8                      cs;
+       u16                     void_write_data;
+
+       wait_queue_head_t       waitq;
+       u32                     waitflags;
+};
+
+static inline int is_double_byte_mode(struct fsl_dspi *dspi)
+{
+       return ((readl(dspi->base + SPI_CTAR(dspi->cs)) & SPI_FRAME_BITS_MASK)
+                       == SPI_FRAME_BITS(8)) ? 0 : 1;
+}
+
+static void set_bit_mode(struct fsl_dspi *dspi, unsigned char bits)
+{
+       u32 temp;
+
+       temp = readl(dspi->base + SPI_CTAR(dspi->cs));
+       temp &= ~SPI_FRAME_BITS_MASK;
+       temp |= SPI_FRAME_BITS(bits);
+       writel(temp, dspi->base + SPI_CTAR(dspi->cs));
+}
+
+static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
+               unsigned long clkrate)
+{
+       /* Valid baud rate pre-scaler values */
+       int pbr_tbl[4] = {2, 3, 5, 7};
+       int brs[16] = { 2,      4,      6,      8,
+               16,     32,     64,     128,
+               256,    512,    1024,   2048,
+               4096,   8192,   16384,  32768 };
+       int temp, i = 0, j = 0;
+
+       temp = clkrate / 2 / speed_hz;
+
+       for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++)
+               for (j = 0; j < ARRAY_SIZE(brs); j++) {
+                       if (pbr_tbl[i] * brs[j] >= temp) {
+                               *pbr = i;
+                               *br = j;
+                               return;
+                       }
+               }
+
+       pr_warn("Can not find valid buad rate,speed_hz is %d,clkrate is %ld\
+               ,we use the max prescaler value.\n", speed_hz, clkrate);
+       *pbr = ARRAY_SIZE(pbr_tbl) - 1;
+       *br =  ARRAY_SIZE(brs) - 1;
+}
+
+static int dspi_transfer_write(struct fsl_dspi *dspi)
+{
+       int tx_count = 0;
+       int tx_word;
+       u16 d16;
+       u8  d8;
+       u32 dspi_pushr = 0;
+       int first = 1;
+
+       tx_word = is_double_byte_mode(dspi);
+
+       /* If we are in word mode, but only have a single byte to transfer
+        * then switch to byte mode temporarily.  Will switch back at the
+        * end of the transfer.
+        */
+       if (tx_word && (dspi->len == 1)) {
+               dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
+               set_bit_mode(dspi, 8);
+               tx_word = 0;
+       }
+
+       while (dspi->len && (tx_count < DSPI_FIFO_SIZE)) {
+               if (tx_word) {
+                       if (dspi->len == 1)
+                               break;
+
+                       if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) {
+                               d16 = *(u16 *)dspi->tx;
+                               dspi->tx += 2;
+                       } else {
+                               d16 = dspi->void_write_data;
+                       }
+
+                       dspi_pushr = SPI_PUSHR_TXDATA(d16) |
+                               SPI_PUSHR_PCS(dspi->cs) |
+                               SPI_PUSHR_CTAS(dspi->cs) |
+                               SPI_PUSHR_CONT;
+
+                       dspi->len -= 2;
+               } else {
+                       if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) {
+
+                               d8 = *(u8 *)dspi->tx;
+                               dspi->tx++;
+                       } else {
+                               d8 = (u8)dspi->void_write_data;
+                       }
+
+                       dspi_pushr = SPI_PUSHR_TXDATA(d8) |
+                               SPI_PUSHR_PCS(dspi->cs) |
+                               SPI_PUSHR_CTAS(dspi->cs) |
+                               SPI_PUSHR_CONT;
+
+                       dspi->len--;
+               }
+
+               if (dspi->len == 0 || tx_count == DSPI_FIFO_SIZE - 1) {
+                       /* last transfer in the transfer */
+                       dspi_pushr |= SPI_PUSHR_EOQ;
+               } else if (tx_word && (dspi->len == 1))
+                       dspi_pushr |= SPI_PUSHR_EOQ;
+
+               if (first) {
+                       first = 0;
+                       dspi_pushr |= SPI_PUSHR_CTCNT; /* clear counter */
+               }
+
+               writel(dspi_pushr, dspi->base + SPI_PUSHR);
+               tx_count++;
+       }
+
+       return tx_count * (tx_word + 1);
+}
+
+static int dspi_transfer_read(struct fsl_dspi *dspi)
+{
+       int rx_count = 0;
+       int rx_word = is_double_byte_mode(dspi);
+       u16 d;
+       while ((dspi->rx < dspi->rx_end)
+                       && (rx_count < DSPI_FIFO_SIZE)) {
+               if (rx_word) {
+                       if ((dspi->rx_end - dspi->rx) == 1)
+                               break;
+
+                       d = SPI_POPR_RXDATA(readl(dspi->base + SPI_POPR));
+
+                       if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
+                               *(u16 *)dspi->rx = d;
+                       dspi->rx += 2;
+
+               } else {
+                       d = SPI_POPR_RXDATA(readl(dspi->base + SPI_POPR));
+                       if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
+                               *(u8 *)dspi->rx = d;
+                       dspi->rx++;
+               }
+               rx_count++;
+       }
+
+       return rx_count;
+}
+
+static int dspi_txrx_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+       struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
+       dspi->cur_transfer = t;
+       dspi->cur_chip = spi_get_ctldata(spi);
+       dspi->cs = spi->chip_select;
+       dspi->void_write_data = dspi->cur_chip->void_write_data;
+
+       dspi->dataflags = 0;
+       dspi->tx = (void *)t->tx_buf;
+       dspi->tx_end = dspi->tx + t->len;
+       dspi->rx = t->rx_buf;
+       dspi->rx_end = dspi->rx + t->len;
+       dspi->len = t->len;
+
+       if (!dspi->rx)
+               dspi->dataflags |= TRAN_STATE_RX_VOID;
+
+       if (!dspi->tx)
+               dspi->dataflags |= TRAN_STATE_TX_VOID;
+
+       writel(dspi->cur_chip->mcr_val, dspi->base + SPI_MCR);
+       writel(dspi->cur_chip->ctar_val, dspi->base + SPI_CTAR(dspi->cs));
+       writel(SPI_RSER_EOQFE, dspi->base + SPI_RSER);
+
+       if (t->speed_hz)
+               writel(dspi->cur_chip->ctar_val,
+                               dspi->base + SPI_CTAR(dspi->cs));
+
+       dspi_transfer_write(dspi);
+
+       if (wait_event_interruptible(dspi->waitq, dspi->waitflags))
+               dev_err(&dspi->pdev->dev, "wait transfer complete fail!\n");
+       dspi->waitflags = 0;
+
+       return t->len - dspi->len;
+}
+
+static void dspi_chipselect(struct spi_device *spi, int value)
+{
+       struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
+       u32 pushr = readl(dspi->base + SPI_PUSHR);
+
+       switch (value) {
+       case BITBANG_CS_ACTIVE:
+               pushr |= SPI_PUSHR_CONT;
+       case BITBANG_CS_INACTIVE:
+               pushr &= ~SPI_PUSHR_CONT;
+       }
+
+       writel(pushr, dspi->base + SPI_PUSHR);
+}
+
+static int dspi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+       struct chip_data *chip;
+       struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
+       unsigned char br = 0, pbr = 0, fmsz = 0;
+
+       /* Only alloc on first setup */
+       chip = spi_get_ctldata(spi);
+       if (chip == NULL) {
+               chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
+               if (!chip)
+                       return -ENOMEM;
+       }
+
+       chip->mcr_val = SPI_MCR_MASTER | SPI_MCR_PCSIS |
+               SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF;
+       if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
+               fmsz = spi->bits_per_word - 1;
+       } else {
+               pr_err("Invalid wordsize\n");
+               kfree(chip);
+               return -ENODEV;
+       }
+
+       chip->void_write_data = 0;
+
+       hz_to_spi_baud(&pbr, &br,
+                       spi->max_speed_hz, clk_get_rate(dspi->clk));
+
+       chip->ctar_val =  SPI_CTAR_FMSZ(fmsz)
+               | SPI_CTAR_CPOL(spi->mode & SPI_CPOL ? 1 : 0)
+               | SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0)
+               | SPI_CTAR_LSBFE(spi->mode & SPI_LSB_FIRST ? 1 : 0)
+               | SPI_CTAR_PBR(pbr)
+               | SPI_CTAR_BR(br);
+
+       spi_set_ctldata(spi, chip);
+
+       return 0;
+}
+
+static int dspi_setup(struct spi_device *spi)
+{
+       if (!spi->max_speed_hz)
+               return -EINVAL;
+
+       if (!spi->bits_per_word)
+               spi->bits_per_word = 8;
+
+       return dspi_setup_transfer(spi, NULL);
+}
+
+static irqreturn_t dspi_interrupt(int irq, void *dev_id)
+{
+       struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
+
+       writel(SPI_SR_EOQF, dspi->base + SPI_SR);
+
+       dspi_transfer_read(dspi);
+
+       if (!dspi->len) {
+               if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM)
+                       set_bit_mode(dspi, 16);
+               dspi->waitflags = 1;
+               wake_up_interruptible(&dspi->waitq);
+       } else {
+               dspi_transfer_write(dspi);
+
+               return IRQ_HANDLED;
+       }
+
+       return IRQ_HANDLED;
+}
+
+static struct of_device_id fsl_dspi_dt_ids[] = {
+       { .compatible = "fsl,vf610-dspi", .data = NULL, },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
+
+#ifdef CONFIG_PM_SLEEP
+static int dspi_suspend(struct device *dev)
+{
+       struct spi_master *master = dev_get_drvdata(dev);
+       struct fsl_dspi *dspi = spi_master_get_devdata(master);
+
+       spi_master_suspend(master);
+       clk_disable_unprepare(dspi->clk);
+
+       return 0;
+}
+
+static int dspi_resume(struct device *dev)
+{
+
+       struct spi_master *master = dev_get_drvdata(dev);
+       struct fsl_dspi *dspi = spi_master_get_devdata(master);
+
+       clk_prepare_enable(dspi->clk);
+       spi_master_resume(master);
+
+       return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops dspi_pm = {
+       SET_SYSTEM_SLEEP_PM_OPS(dspi_suspend, dspi_resume)
+};
+
+static int dspi_probe(struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+       struct spi_master *master;
+       struct fsl_dspi *dspi;
+       struct resource *res;
+       int ret = 0, cs_num, bus_num;
+
+       master = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
+       if (!master)
+               return -ENOMEM;
+
+       dspi = spi_master_get_devdata(master);
+       dspi->pdev = pdev;
+       dspi->bitbang.master = spi_master_get(master);
+       dspi->bitbang.chipselect = dspi_chipselect;
+       dspi->bitbang.setup_transfer = dspi_setup_transfer;
+       dspi->bitbang.txrx_bufs = dspi_txrx_transfer;
+       dspi->bitbang.master->setup = dspi_setup;
+       dspi->bitbang.master->dev.of_node = pdev->dev.of_node;
+
+       master->mode_bits = SPI_CPOL | SPI_CPHA;
+       master->bits_per_word_mask = SPI_BPW_MASK(4) | SPI_BPW_MASK(8) |
+                                       SPI_BPW_MASK(16);
+
+       ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "can't get spi-num-chipselects\n");
+               goto out_master_put;
+       }
+       master->num_chipselect = cs_num;
+
+       ret = of_property_read_u32(np, "bus-num", &bus_num);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "can't get bus-num\n");
+               goto out_master_put;
+       }
+       master->bus_num = bus_num;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "can't get platform resource\n");
+               ret = -EINVAL;
+               goto out_master_put;
+       }
+
+       dspi->base = devm_ioremap_resource(&pdev->dev, res);
+       if (!dspi->base) {
+               ret = -EINVAL;
+               goto out_master_put;
+       }
+
+       dspi->irq = platform_get_irq(pdev, 0);
+       if (dspi->irq < 0) {
+               dev_err(&pdev->dev, "can't get platform irq\n");
+               ret = dspi->irq;
+               goto out_master_put;
+       }
+
+       ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0,
+                       pdev->name, dspi);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
+               goto out_master_put;
+       }
+
+       dspi->clk = devm_clk_get(&pdev->dev, "dspi");
+       if (IS_ERR(dspi->clk)) {
+               ret = PTR_ERR(dspi->clk);
+               dev_err(&pdev->dev, "unable to get clock\n");
+               goto out_master_put;
+       }
+       clk_prepare_enable(dspi->clk);
+
+       init_waitqueue_head(&dspi->waitq);
+       platform_set_drvdata(pdev, dspi);
+
+       ret = spi_bitbang_start(&dspi->bitbang);
+       if (ret != 0) {
+               dev_err(&pdev->dev, "Problem registering DSPI master\n");
+               goto out_clk_put;
+       }
+
+       pr_info(KERN_INFO "Freescale DSPI master initialized\n");
+       return ret;
+
+out_clk_put:
+       clk_disable_unprepare(dspi->clk);
+out_master_put:
+       spi_master_put(master);
+       platform_set_drvdata(pdev, NULL);
+
+       return ret;
+}
+
+static int dspi_remove(struct platform_device *pdev)
+{
+       struct fsl_dspi *dspi = platform_get_drvdata(pdev);
+
+       /* Disconnect from the SPI framework */
+       spi_bitbang_stop(&dspi->bitbang);
+       spi_master_put(dspi->bitbang.master);
+
+       return 0;
+}
+
+static struct platform_driver fsl_dspi_driver = {
+       .driver.name    = DRIVER_NAME,
+       .driver.of_match_table = fsl_dspi_dt_ids,
+       .driver.owner   = THIS_MODULE,
+       .driver.pm = &dspi_pm,
+       .probe          = dspi_probe,
+       .remove         = dspi_remove,
+};
+module_platform_driver(fsl_dspi_driver);
+
+MODULE_DESCRIPTION("Freescale DSPI Controller Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);