The i2c-imx driver incorrectly uses readb()/writeb() to read and
write to the appropriate registers when performing a repeated start.
The appropriate imx_i2c_read_reg()/imx_i2c_write_reg() functions
should be used instead. Performing a repeated start results in
a kernel panic. The platform is imx.
Signed-off-by: Michail G Etairidis <m.etairidis@beck-ipc.com>
Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver")
Fixes: 054b62d9f25c ("i2c: imx: fix the i2c bus hang issue when do repeat restart")
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* the first read operation, otherwise the first read cost
* one extra clock cycle.
*/
* the first read operation, otherwise the first read cost
* one extra clock cycle.
*/
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
}
msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
}
msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
* the first read operation, otherwise the first read cost
* one extra clock cycle.
*/
* the first read operation, otherwise the first read cost
* one extra clock cycle.
*/
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
}
} else if (i == (msgs->len - 2)) {
dev_dbg(&i2c_imx->adapter.dev,
}
} else if (i == (msgs->len - 2)) {
dev_dbg(&i2c_imx->adapter.dev,