sky2: ethtool register reserved area blackout

patch 295b54c4902c52cd00d7c837d50a86e39e26caec in mainline.

Make sure and not dump reserved areas of device space.
Touching some of these causes machine check exceptions on boards
like D-Link DGE-550SX.

Coding note, used a complex switch statement rather than bitmap
because it is easier to relate the block values to the documentation
rather than looking at a encoded bitmask.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 457de2654a5c467b28f3e8c8f446f299bc9321ce..d292aefc39a6b5d043ccf2465f9d18c89e030246 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3570,20 +3570,64 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 {
        const struct sky2_port *sky2 = netdev_priv(dev);
        const void __iomem *io = sky2->hw->regs;
+       unsigned int b;
 
        regs->version = 1;
-       memset(p, 0, regs->len);
 
-       memcpy_fromio(p, io, B3_RAM_ADDR);
-
-       /* skip diagnostic ram region */
-       memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, 0x2000 - B3_RI_WTO_R1);
+       for (b = 0; b < 128; b++) {
+               /* This complicated switch statement is to make sure and
+                * only access regions that are unreserved.
+                * Some blocks are only valid on dual port cards.
+                * and block 3 has some special diagnostic registers that
+                * are poison.
+                */
+               switch (b) {
+               case 3:
+                       /* skip diagnostic ram region */
+                       memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
+                       break;
 
-       /* copy GMAC registers */
-       memcpy_fromio(p + BASE_GMAC_1, io + BASE_GMAC_1, 0x1000);
-       if (sky2->hw->ports > 1)
-               memcpy_fromio(p + BASE_GMAC_2, io + BASE_GMAC_2, 0x1000);
+               /* dual port cards only */
+               case 5:         /* Tx Arbiter 2 */
+               case 9:         /* RX2 */
+               case 14 ... 15: /* TX2 */
+               case 17: case 19: /* Ram Buffer 2 */
+               case 22 ... 23: /* Tx Ram Buffer 2 */
+               case 25:        /* Rx MAC Fifo 1 */
+               case 27:        /* Tx MAC Fifo 2 */
+               case 31:        /* GPHY 2 */
+               case 40 ... 47: /* Pattern Ram 2 */
+               case 52: case 54: /* TCP Segmentation 2 */
+               case 112 ... 116: /* GMAC 2 */
+                       if (sky2->hw->ports == 1)
+                               goto reserved;
+                       /* fall through */
+               case 0:         /* Control */
+               case 2:         /* Mac address */
+               case 4:         /* Tx Arbiter 1 */
+               case 7:         /* PCI express reg */
+               case 8:         /* RX1 */
+               case 12 ... 13: /* TX1 */
+               case 16: case 18:/* Rx Ram Buffer 1 */
+               case 20 ... 21: /* Tx Ram Buffer 1 */
+               case 24:        /* Rx MAC Fifo 1 */
+               case 26:        /* Tx MAC Fifo 1 */
+               case 28 ... 29: /* Descriptor and status unit */
+               case 30:        /* GPHY 1*/
+               case 32 ... 39: /* Pattern Ram 1 */
+               case 48: case 50: /* TCP Segmentation 1 */
+               case 56 ... 60: /* PCI space */
+               case 80 ... 84: /* GMAC 1 */
+                       memcpy_fromio(p, io, 128);
+                       break;
+               default:
+reserved:
+                       memset(p, 0, 128);
+               }
 
+               p += 128;
+               io += 128;
+       }
 }
 
 /* In order to do Jumbo packets on these chips, need to turn off the