--- /dev/null
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-android"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MX6=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_MACH_TX6=y
+CONFIG_USB_EHCI_ARC_H1=y
+CONFIG_USB_FSL_ARC_OTG=y
+# CONFIG_ISP1504_MXC is not set
+CONFIG_MXC_PWM=y
+CONFIG_DMA_ZONE_SIZE=184
+# CONFIG_SWP_EMULATE is not set
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw rootfstype=jffs2 ip=off"
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_IMX=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
+CONFIG_APM_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_FLEXCAN=y
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_MISC_DEVICES=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+CONFIG_FEC_NAPI=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_IMX=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
+# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
+# CONFIG_TOUCHSCREEN_USB_3M is not set
+# CONFIG_TOUCHSCREEN_USB_ITM is not set
+# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
+# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
+# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
+# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
+# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
+# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
+# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
+# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
+# CONFIG_TOUCHSCREEN_USB_E2I is not set
+# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
+# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
+# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
+CONFIG_TOUCHSCREEN_TSC2007=y
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_FSL_OTP=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_IMX2_WDT=y
+# CONFIG_MFD_MXC_HDMI is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+CONFIG_MXC_CAMERA_OV3640=y
+CONFIG_MXC_CAMERA_OV5640=y
+CONFIG_MXC_CAMERA_OV8820_MIPI=y
+CONFIG_MXC_CAMERA_OV5642=y
+CONFIG_MXC_CAMERA_OV5640_MIPI=y
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=y
+CONFIG_USB_VIDEO_CLASS=y
+# CONFIG_USB_GSPCA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DRM=y
+CONFIG_DRM_VIVANTE=y
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FB_MXC_LDB=y
+CONFIG_FB_MXC_MIPI_DSI=y
+CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_HIDRAW=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ARC=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MXC_OTG=y
+CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_DMADEVICES=y
+CONFIG_MXC_PXP_V2=y
+CONFIG_IMX_SDMA=y
+CONFIG_MXC_IPU=y
+CONFIG_MXC_DAM=y
+# CONFIG_MXC_HMP4E is not set
+# CONFIG_MXC_HWEVENT is not set
+CONFIG_MXC_VPU_DEBUG=y
+CONFIG_MXC_ASRC=y
+CONFIG_MXC_MLB150=y
+CONFIG_IMX_ADC=y
+CONFIG_MXC_GPU_VIV=y
+# CONFIG_ANATOP_THERMAL is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_USE_NEW_IDMAPPER=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_DEFAULT="utf-8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_VERBOSE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-karo"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MX6=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_MACH_TX6=y
+CONFIG_USB_EHCI_ARC_H1=y
+CONFIG_USB_FSL_ARC_OTG=y
+# CONFIG_ISP1504_MXC is not set
+CONFIG_MXC_PWM=y
+CONFIG_CLK_DEBUG=y
+CONFIG_DMA_ZONE_SIZE=184
+# CONFIG_SWP_EMULATE is not set
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw rootfstype=jffs2 ip=off"
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_IMX=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_APM_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_MISC_DEVICES=y
+# CONFIG_MXS_PERFMON is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=m
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+CONFIG_FEC_NAPI=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_IMX=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
+# CONFIG_TOUCHSCREEN_USB_3M is not set
+# CONFIG_TOUCHSCREEN_USB_ITM is not set
+# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
+# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
+# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
+# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
+# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
+# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
+# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
+# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
+# CONFIG_TOUCHSCREEN_USB_E2I is not set
+# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
+# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
+# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
+CONFIG_TOUCHSCREEN_TSC2007=m
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_FSL_OTP=m
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_APM_POWER=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_IMX2_WDT=y
+# CONFIG_MFD_MXC_HDMI is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_DEV=m
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+CONFIG_MXC_CAMERA_OV3640=m
+CONFIG_MXC_CAMERA_OV5640=m
+CONFIG_MXC_CAMERA_OV8820_MIPI=m
+CONFIG_MXC_CAMERA_OV5642=m
+CONFIG_MXC_CAMERA_OV5640_MIPI=m
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DRM=y
+CONFIG_DRM_VIVANTE=y
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FB_MXC_LDB=y
+CONFIG_FB_MXC_MIPI_DSI=y
+CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_IMX_SGTL5000=m
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ARC=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MXC_OTG=m
+CONFIG_MMC=m
+CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_DMADEVICES=y
+CONFIG_MXC_PXP_V2=y
+CONFIG_IMX_SDMA=y
+CONFIG_MXC_IPU=y
+CONFIG_MXC_DAM=m
+# CONFIG_MXC_HMP4E is not set
+# CONFIG_MXC_HWEVENT is not set
+CONFIG_MXC_VPU_DEBUG=y
+CONFIG_MXC_ASRC=m
+CONFIG_MXC_MLB150=m
+CONFIG_IMX_ADC=m
+CONFIG_MXC_GPU_VIV=y
+# CONFIG_ANATOP_THERMAL is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_USE_NEW_IDMAPPER=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_DEFAULT="utf-8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SLUB_DEBUG_ON=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_DEBUG_PAGEALLOC=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
--- /dev/null
+/*
+ * Copyright (C) 2013 by Oliver Wendt <OW@KARO-electronics.de>
+ *
+ * based on: arch/arm/mach-mx6/board-mx6q_sabresd.c
+ * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/nodemask.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/i2c.h>
+#include <linux/ata.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pmic_external.h>
+#include <linux/pmic_status.h>
+#include <linux/ipu.h>
+#include <linux/mxcfb.h>
+#include <linux/pwm_backlight.h>
+#include <linux/fec.h>
+#include <linux/memblock.h>
+#include <linux/gpio.h>
+#include <linux/etherdevice.h>
+#include <linux/regulator/anatop-regulator.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/input/edt-ft5x06.h>
+#include <linux/i2c/tsc2007.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mxc_dvfs.h>
+#include <mach/memory.h>
+#include <mach/iomux-mx6q.h>
+#include <mach/imx-uart.h>
+#include <mach/viv_gpu.h>
+#include <mach/ipu-v3.h>
+#include <mach/mxc_asrc.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "usb.h"
+#include "devices-imx6q.h"
+#include "crm_regs.h"
+#include "cpu_op-mx6.h"
+
+#define TX6_USBH1_PWR_EN IMX_GPIO_NR(3, 31)
+
+#define TX6_SD1_CD IMX_GPIO_NR(7, 2)
+#define TX6_SD2_CD IMX_GPIO_NR(7, 3)
+
+#define TX6_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
+#define TX6_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
+
+#define TX6_PCIE_PWR_EN IMX_GPIO_NR(3, 19)
+#define TX6_USB_OTG_PWR IMX_GPIO_NR(1, 7)
+#define TX6_USB_H1_PWR IMX_GPIO_NR(3, 31)
+#define TX6_DISP_RST_B IMX_GPIO_NR(3, 29)
+#define TX6_DISP_PWR_EN IMX_GPIO_NR(2, 31)
+
+#define TX6_FEC_PHY_RST_B IMX_GPIO_NR(7, 6)
+#define TX6_FEC_PHY_PWR_EN IMX_GPIO_NR(3, 20)
+
+/* EDT FT5X06 */
+#define EDT_FT5X06_IRQ_PIN IMX_GPIO_NR(6, 15)
+#define EDT_FT5X06_RESET_PIN IMX_GPIO_NR(2, 22)
+#define EDT_FT5X06_WAKE_PIN IMX_GPIO_NR(2, 21)
+
+#define TX6_FLEXCAN_XCVR_SW IMX_GPIO_NR(4, 21)
+#define TX6_TSC2007_PEN_GPIO IMX_GPIO_NR(3, 26)
+#define TX6_STK5_LED_GPIO IMX_GPIO_NR(2, 20)
+#define TX6_BACKLIGHT_GPIO IMX_GPIO_NR(1, 1)
+
+static struct clk *clko;
+static int enable_lcd_ldb;
+
+extern char *gp_reg_id;
+extern char *soc_reg_id;
+extern char *pu_reg_id;
+
+static const struct esdhc_platform_data mx6q_tx6_sd1_data __initconst = {
+ .cd_gpio = TX6_SD1_CD,
+ .wp_gpio = -EINVAL,
+ .keep_power_at_suspend = 1,
+ .support_8bit = 0,
+ .delay_line = 0,
+ .cd_type = ESDHC_CD_GPIO,
+};
+
+static const struct esdhc_platform_data mx6q_tx6_sd2_data __initconst = {
+ .cd_gpio = TX6_SD2_CD,
+ .wp_gpio = -EINVAL,
+ .keep_power_at_suspend = 1,
+ .support_8bit = 0,
+ .delay_line = 0,
+ .cd_type = ESDHC_CD_GPIO,
+};
+
+static iomux_v3_cfg_t tx6_gpmi_nand_pads[] __initdata = {
+ MX6Q_PAD_NANDF_CLE__RAWNAND_CLE,
+ MX6Q_PAD_NANDF_ALE__RAWNAND_ALE,
+ MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N,
+ MX6Q_PAD_NANDF_RB0__RAWNAND_READY0,
+ MX6Q_PAD_NANDF_D0__RAWNAND_D0,
+ MX6Q_PAD_NANDF_D1__RAWNAND_D1,
+ MX6Q_PAD_NANDF_D2__RAWNAND_D2,
+ MX6Q_PAD_NANDF_D3__RAWNAND_D3,
+ MX6Q_PAD_NANDF_D4__RAWNAND_D4,
+ MX6Q_PAD_NANDF_D5__RAWNAND_D5,
+ MX6Q_PAD_NANDF_D6__RAWNAND_D6,
+ MX6Q_PAD_NANDF_D7__RAWNAND_D7,
+ MX6Q_PAD_SD4_CMD__RAWNAND_RDN,
+ MX6Q_PAD_SD4_CLK__RAWNAND_WRN,
+ MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN,
+};
+
+static int __init gpmi_nand_platform_init(void)
+{
+ return mxc_iomux_v3_setup_multiple_pads(tx6_gpmi_nand_pads,
+ ARRAY_SIZE(tx6_gpmi_nand_pads));
+}
+
+static const struct gpmi_nand_platform_data
+mx6q_gpmi_nand_platform_data __initconst = {
+ .platform_init = gpmi_nand_platform_init,
+ .min_prop_delay_in_ns = 5,
+ .max_prop_delay_in_ns = 9,
+ .max_chip_count = 1,
+ .enable_bbt = 1,
+};
+
+static const struct anatop_thermal_platform_data
+ mx6q_tx6_anatop_thermal_data __initconst = {
+ .name = "anatop_thermal",
+};
+
+static inline void mx6q_tx6_init_uart(void)
+{
+ imx6q_add_imx_uart(0, NULL);
+ imx6q_add_imx_uart(1, NULL);
+ imx6q_add_imx_uart(2, NULL);
+}
+
+static int mx6q_tx6_fec_phy_init(struct phy_device *phydev)
+{
+ gpio_request_one(TX6_FEC_PHY_PWR_EN, GPIOF_OUT_INIT_HIGH, "fec_phy_pwr_en");
+
+ gpio_request_one(TX6_FEC_PHY_RST_B, GPIOF_OUT_INIT_LOW, "fec_phy_reset_B");
+ mdelay(1);
+ gpio_set_value(TX6_FEC_PHY_RST_B, 1);
+
+ return 0;
+}
+
+static struct fec_platform_data fec_data __initdata = {
+ .init = mx6q_tx6_fec_phy_init,
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static int mx6q_tx6_spi_cs[] = {
+ TX6_ECSPI1_CS0,
+ TX6_ECSPI1_CS1,
+};
+
+static const struct spi_imx_master mx6q_tx6_spi_data __initconst = {
+ .chipselect = mx6q_tx6_spi_cs,
+ .num_chipselect = ARRAY_SIZE(mx6q_tx6_spi_cs),
+};
+
+static struct spi_board_info tx6_spi_board_info[] __initdata = {
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 54000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 54000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ },
+};
+
+static struct mxc_audio_platform_data mx6_tx6_audio_data;
+
+static int mx6_tx6_sgtl5000_init(void)
+{
+ int ret;
+ struct clk *new_parent;
+ int rate;
+
+ clko = clk_get(NULL, "clko_clk");
+ if (IS_ERR(clko)) {
+ pr_err("can't get CLKO clock.\n");
+ return PTR_ERR(clko);
+ }
+ new_parent = clk_get(NULL, "ahb");
+ if (!IS_ERR(new_parent)) {
+ ret = clk_set_parent(clko, new_parent);
+ clk_put(new_parent);
+ if (ret) {
+ pr_err("Failed to set CLKO parent to AHB\n");
+ return ret;
+ }
+ }
+ rate = clk_round_rate(clko, 16000000);
+ if (rate < 8000000 || rate > 27000000) {
+ pr_err("Error:SGTL5000 mclk freq %d out of range!\n", rate);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ mx6_tx6_audio_data.sysclk = 26000000;
+ ret = clk_set_rate(clko, rate);
+ if (ret) {
+ pr_err("Failed to set CLKO rate to %u.%03uMHz\n",
+ mx6_tx6_audio_data.sysclk / 1000000,
+ mx6_tx6_audio_data.sysclk / 1000 % 1000);
+ goto err;
+ }
+
+ ret = clk_enable(clko);
+ if (ret) {
+ pr_err("Failed to enable CLKO clock: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ clk_put(clko);
+ return ret;
+}
+
+static int mx6_tx6_sgtl5000_exit(void)
+{
+ if (!IS_ERR(clko)) {
+ clk_disable(clko);
+ clk_put(clko);
+ }
+ return 0;
+}
+
+static struct imx_ssi_platform_data mx6_tx6_ssi_pdata = {
+ .flags = IMX_SSI_DMA | IMX_SSI_SYN,
+};
+
+static struct mxc_audio_platform_data mx6_tx6_audio_data = {
+ .ssi_num = 1,
+ .src_port = 2,
+ .ext_port = 5,
+ .init = mx6_tx6_sgtl5000_init,
+ .finit = mx6_tx6_sgtl5000_exit,
+ .hp_gpio = -1,
+};
+
+static struct platform_device mx6_tx6_audio_device = {
+ .name = "imx-sgtl5000",
+};
+
+/* Multitouch controller */
+#if defined(CONFIG_TOUCHSCREEN_EDT_FT5X06) || \
+ defined(CONFIG_TOUCHSCREEN_EDT_FT5X06_MODULE)
+
+static struct edt_ft5x06_platform_data edt_ft5x06_pdata = {
+ .irq_pin = EDT_FT5X06_IRQ_PIN,
+ .reset_pin = EDT_FT5X06_RESET_PIN,
+ /* wakeup added - thou not really implemented in driver yet */
+ .wakeup_pin = EDT_FT5X06_WAKE_PIN,
+};
+
+static inline void __init imx6q_tx6_init_edt_ft5x06(void)
+{
+ int ret = 0;
+
+ ret = gpio_request_one(EDT_FT5X06_WAKE_PIN, GPIOF_OUT_INIT_LOW,
+ "edt-ft5x06-wake_up");
+ if (ret) {
+ pr_err("edt-ft5x06: failed to get GPIO EDT_FT5X06_WAKE_PIN: %d\n",
+ ret);
+ return;
+ } else {
+ pr_info("edt-ft5x06: wake-up pin requesting: GPIO-%d \n",
+ EDT_FT5X06_WAKE_PIN);
+ }
+ gpio_set_value(EDT_FT5X06_WAKE_PIN, 1);
+}
+#endif
+
+static int tx6_tsc2007_get_pendown_state(void)
+{
+ return !gpio_get_value(TX6_TSC2007_PEN_GPIO);
+}
+
+static int tx6_tsc2007_plat_init(void)
+{
+ return gpio_request_one(TX6_TSC2007_PEN_GPIO, GPIOF_IN, "TSC2007 PENDETECT");
+}
+
+static void tx6_tsc2007_plat_exit(void)
+{
+ gpio_free(TX6_TSC2007_PEN_GPIO);
+}
+
+static struct tsc2007_platform_data tx6_tsc2007_pdata = {
+ .x_plate_ohms = 480,
+ .get_pendown_state = tx6_tsc2007_get_pendown_state,
+ .init_platform_hw = tx6_tsc2007_plat_init,
+ .exit_platform_hw = tx6_tsc2007_plat_exit,
+};
+
+static struct imxi2c_platform_data mx6q_tx6_i2c_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info mxc_i2c0_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("ds1339", 0x68),
+ },
+};
+
+static struct i2c_board_info mxc_i2c2_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("sgtl5000", 0x0a),
+ },
+ {
+ I2C_BOARD_INFO("tsc2007", 0x48),
+ .platform_data = &tx6_tsc2007_pdata,
+ .irq = gpio_to_irq(TX6_TSC2007_PEN_GPIO),
+ },
+#if defined(CONFIG_TOUCHSCREEN_EDT_FT5X06) || \
+ defined(CONFIG_TOUCHSCREEN_EDT_FT5X06_MODULE)
+ {
+ I2C_BOARD_INFO("edt-ft5x06", 0x38),
+ .platform_data = &edt_ft5x06_pdata,
+ .irq = gpio_to_irq(EDT_FT5X06_IRQ_PIN),
+ },
+#endif /* EDT_FT5X06 */
+};
+
+static void imx6q_tx6_usbotg_vbus(bool on)
+{
+ if (on)
+ gpio_set_value(TX6_USB_OTG_PWR, 1);
+ else
+ gpio_set_value(TX6_USB_OTG_PWR, 0);
+}
+
+static void imx6q_tx6_usbh1_vbus(bool on)
+{
+ if (on)
+ gpio_set_value(TX6_USB_H1_PWR, 1);
+ else
+ gpio_set_value(TX6_USB_H1_PWR, 0);
+}
+
+static void __init imx6q_tx6_init_usb(void)
+{
+ int ret = 0;
+
+ imx_otg_base = MX6_IO_ADDRESS(MX6Q_USB_OTG_BASE_ADDR);
+
+ ret = gpio_request_one(TX6_USB_OTG_PWR, GPIOF_OUT_INIT_LOW, "usb-pwr");
+ if (ret) {
+ pr_err("failed to get GPIO TX6_USB_OTG_PWR: %d\n",
+ ret);
+ return;
+ }
+ mx6_set_otghost_vbus_func(imx6q_tx6_usbotg_vbus);
+
+ ret = gpio_request_one(TX6_USB_H1_PWR, GPIOF_OUT_INIT_LOW, "usb-h1-pwr");
+ if (ret) {
+ pr_err("failed to get GPIO TX6_USB_H1_PWR: %d\n",
+ ret);
+ return;
+ }
+
+ mx6_set_host1_vbus_func(imx6q_tx6_usbh1_vbus);
+}
+
+#include <asm/bitops.h>
+static void mx6q_tx6_flexcan_switch(int id, int enable)
+{
+ static unsigned long flexcan_enable;
+
+ if (id < 0 || id > 1)
+ return;
+ if (enable) {
+ if (!flexcan_enable)
+ gpio_set_value(TX6_FLEXCAN_XCVR_SW, 0);
+ set_bit(id, &flexcan_enable);
+ } else {
+ clear_bit(id, &flexcan_enable);
+ if (!flexcan_enable)
+ gpio_set_value(TX6_FLEXCAN_XCVR_SW, 1);
+ }
+}
+
+static void mx6q_tx6_flexcan0_switch(int enable)
+{
+ mx6q_tx6_flexcan_switch(0, enable);
+}
+
+static void mx6q_tx6_flexcan1_switch(int enable)
+{
+ mx6q_tx6_flexcan_switch(1, enable);
+}
+
+static const struct flexcan_platform_data
+mx6q_tx6_flexcan_pdata[] __initconst = {
+ {
+ .transceiver_switch = mx6q_tx6_flexcan0_switch,
+ },
+ {
+ .transceiver_switch = mx6q_tx6_flexcan1_switch,
+ },
+};
+
+static int __init tx6_flexcan_init(void)
+{
+ int ret;
+
+ ret = gpio_request_one(TX6_FLEXCAN_XCVR_SW, GPIOF_OUT_INIT_HIGH, "Flexcan XCVR");
+ return ret;
+}
+
+static struct viv_gpu_platform_data imx6q_gpu_pdata __initdata = {
+ .reserved_mem_size = SZ_128M,
+};
+
+static struct imx_asrc_platform_data imx_asrc_data = {
+ .channel_bits = 4,
+ .clk_map_ver = 2,
+};
+
+static struct ipuv3_fb_platform_data tx6_fb_data[] = {
+ {
+ .disp_dev = "lcd",
+ .interface_pix_fmt = IPU_PIX_FMT_RGB24,
+ .mode_str = "VGA-XGA",
+ .default_bpp = 24,
+ .int_clk = false,
+ }, {
+ .disp_dev = "ldb",
+ .interface_pix_fmt = IPU_PIX_FMT_RGB666,
+ .mode_str = "LDB-XGA",
+ .default_bpp = 16,
+ .int_clk = false,
+ }, {
+ .disp_dev = "ldb",
+ .interface_pix_fmt = IPU_PIX_FMT_RGB666,
+ .mode_str = "LDB-VGA",
+ .default_bpp = 16,
+ .int_clk = false,
+ },
+};
+
+static struct fsl_mxc_lcd_platform_data lcdif_data = {
+ .ipu_id = 0,
+ .disp_id = 0,
+ .default_ifmt = IPU_PIX_FMT_RGB565,
+};
+
+static struct fsl_mxc_ldb_platform_data ldb_data = {
+ .ipu_id = 1,
+ .disp_id = 0,
+ .ext_ref = 1,
+ .mode = LDB_SEP0,
+ .sec_ipu_id = 1,
+ .sec_disp_id = 1,
+};
+
+static struct imx_ipuv3_platform_data ipu_data[] = {
+ {
+ .rev = 4,
+ .csi_clk[0] = "clko_clk",
+ }, {
+ .rev = 4,
+ .csi_clk[0] = "clko_clk",
+ },
+};
+
+static void tx6_suspend_enter(void)
+{
+ /* suspend preparation */
+ /* Disable AUX 5V */
+}
+
+static void tx6_suspend_exit(void)
+{
+ /* resume restore */
+ /* Enable AUX 5V */
+}
+static const struct pm_platform_data mx6q_tx6_pm_data __initconst = {
+ .name = "imx_pm",
+ .suspend_enter = tx6_suspend_enter,
+ .suspend_exit = tx6_suspend_exit,
+};
+
+#if defined(CONFIG_SND_SOC_SGTL5000) || defined(CONFIG_SND_SOC_SGTL5000_MODULE)
+static struct regulator_consumer_supply sgtl5000_tx6_consumer_vdda = {
+ .supply = "VDDA",
+ .dev_name = "2-000a",
+};
+
+static struct regulator_consumer_supply sgtl5000_tx6_consumer_vddio = {
+ .supply = "VDDIO",
+ .dev_name = "2-000a",
+};
+
+static struct regulator_consumer_supply sgtl5000_tx6_consumer_vddd = {
+ .supply = "VDDD",
+ .dev_name = "2-000a",
+};
+
+static struct regulator_init_data sgtl5000_tx6_vdda_reg_initdata = {
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sgtl5000_tx6_consumer_vdda,
+};
+
+static struct regulator_init_data sgtl5000_tx6_vddio_reg_initdata = {
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sgtl5000_tx6_consumer_vddio,
+};
+
+static struct regulator_init_data sgtl5000_tx6_vddd_reg_initdata = {
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sgtl5000_tx6_consumer_vddd,
+};
+
+static struct fixed_voltage_config sgtl5000_tx6_vdda_reg_config = {
+ .supply_name = "VDDA",
+ .microvolts = 2500000,
+ .gpio = -1,
+ .init_data = &sgtl5000_tx6_vdda_reg_initdata,
+};
+
+static struct fixed_voltage_config sgtl5000_tx6_vddio_reg_config = {
+ .supply_name = "VDDIO",
+ .microvolts = 3300000,
+ .gpio = -1,
+ .init_data = &sgtl5000_tx6_vddio_reg_initdata,
+};
+
+static struct fixed_voltage_config sgtl5000_tx6_vddd_reg_config = {
+ .supply_name = "VDDD",
+ .microvolts = 1200000,
+ .gpio = -1,
+ .init_data = &sgtl5000_tx6_vddd_reg_initdata,
+};
+
+static struct platform_device sgtl5000_tx6_vdda_reg_devices = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &sgtl5000_tx6_vdda_reg_config,
+ },
+};
+
+static struct platform_device sgtl5000_tx6_vddio_reg_devices = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sgtl5000_tx6_vddio_reg_config,
+ },
+};
+
+static struct platform_device sgtl5000_tx6_vddd_reg_devices = {
+ .name = "reg-fixed-voltage",
+ .id = 2,
+ .dev = {
+ .platform_data = &sgtl5000_tx6_vddd_reg_config,
+ },
+};
+
+#endif /* CONFIG_SND_SOC_SGTL5000 */
+
+static int imx6q_init_audio(void)
+{
+ mxc_register_device(&mx6_tx6_audio_device,
+ &mx6_tx6_audio_data);
+ imx6q_add_imx_ssi(1, &mx6_tx6_ssi_pdata);
+#if defined(CONFIG_SND_SOC_SGTL5000) || defined(CONFIG_SND_SOC_SGTL5000_MODULE)
+ platform_device_register(&sgtl5000_tx6_vdda_reg_devices);
+ platform_device_register(&sgtl5000_tx6_vddio_reg_devices);
+ platform_device_register(&sgtl5000_tx6_vddd_reg_devices);
+#endif
+ return 0;
+}
+
+static struct gpio_led tx6_gpio_leds[] = {
+ {
+ .name = "heartbeat",
+ .gpio = TX6_STK5_LED_GPIO,
+ .default_trigger = "heartbeat",
+ },
+};
+
+static struct gpio_led_platform_data tx6_gpio_leds_data = {
+ .leds = tx6_gpio_leds,
+ .num_leds = ARRAY_SIZE(tx6_gpio_leds),
+};
+
+static struct platform_device tx6_gpio_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &tx6_gpio_leds_data,
+ }
+};
+
+static struct resource tx6_pwm_resource[] __initdata = {
+ {
+ .start = MX6Q_PWM2_BASE_ADDR,
+ .end = MX6Q_PWM2_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX6Q_INT_PWM2,
+ .end = MX6Q_INT_PWM2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static void tx6_enable_pwm_pad(void)
+{
+ mxc_iomux_v3_setup_pad(MX6Q_PAD_GPIO_1__PWM2_PWMO);
+}
+
+static void tx6_disable_pwm_pad(void)
+{
+ mxc_iomux_v3_setup_pad(MX6Q_PAD_GPIO_1__GPIO_1_1);
+}
+
+static const struct mxc_pwm_platform_data tx6_pwm_pdata __initconst = {
+ .pwmo_invert = 1,
+ .enable_pwm_pad = tx6_enable_pwm_pad,
+ .disable_pwm_pad = tx6_disable_pwm_pad,
+};
+
+static struct platform_pwm_backlight_data tx6_pwm_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 50000,
+};
+
+static int __init tx6_pwm_register(void)
+{
+ int ret;
+
+ ret = gpio_request_one(TX6_BACKLIGHT_GPIO, GPIOF_OUT_INIT_HIGH,
+ "LCD Backlight");
+ if (ret)
+ return ret;
+
+ if (!imx_add_platform_device("mxc_pwm", 1, tx6_pwm_resource,
+ ARRAY_SIZE(tx6_pwm_resource),
+ &tx6_pwm_pdata, sizeof(tx6_pwm_pdata)))
+ goto free_gpio;
+
+ if (!imx6q_add_mxc_pwm_backlight(0, &tx6_pwm_backlight_data))
+ goto free_gpio;
+
+ return 0;
+
+free_gpio:
+ gpio_free(TX6_BACKLIGHT_GPIO);
+ return ret;
+}
+
+static struct mxc_dvfs_platform_data tx6_dvfscore_data = {
+#ifdef CONFIG_MX6_INTER_LDO_BYPASS
+ .reg_id = "VDDCORE",
+ .soc_id = "VDDSOC",
+#else
+ .reg_id = "cpu_vddgp",
+ .soc_id = "cpu_vddsoc",
+ .pu_id = "cpu_vddvpu",
+#endif
+ .clk1_id = "cpu_clk",
+ .clk2_id = "gpc_dvfs_clk",
+ .gpc_cntr_offset = MXC_GPC_CNTR_OFFSET,
+ .ccm_cdcr_offset = MXC_CCM_CDCR_OFFSET,
+ .ccm_cacrr_offset = MXC_CCM_CACRR_OFFSET,
+ .ccm_cdhipr_offset = MXC_CCM_CDHIPR_OFFSET,
+ .prediv_mask = 0x1F800,
+ .prediv_offset = 11,
+ .prediv_val = 3,
+ .div3ck_mask = 0xE0000000,
+ .div3ck_offset = 29,
+ .div3ck_val = 2,
+ .emac_val = 0x08,
+ .upthr_val = 25,
+ .dnthr_val = 9,
+ .pncthr_val = 33,
+ .upcnt_val = 10,
+ .dncnt_val = 10,
+ .delay_time = 80,
+};
+
+static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
+ char **cmdline, struct meminfo *mi)
+{
+}
+
+static iomux_v3_cfg_t mx6q_tx6_pads[] = {
+ /* AUDMUX */
+ MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
+ MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
+ MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
+ MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
+
+ /* CAN2 */
+ MX6Q_PAD_KEY_COL4__CAN2_TXCAN,
+ MX6Q_PAD_KEY_ROW4__CAN2_RXCAN,
+
+ /* CCM */
+ /* MX6Q_PAD_GPIO_0__CCM_CLKO, */ /* SGTL500 sys_mclk */
+ /* MX6Q_PAD_GPIO_3__CCM_CLKO2, */ /* J5 - Camera MCLK */
+
+ /* ECSPI1 */
+ MX6Q_PAD_EIM_D16__ECSPI1_SCLK,
+ MX6Q_PAD_EIM_D18__ECSPI1_MOSI,
+ MX6Q_PAD_EIM_D17__ECSPI1_MISO,
+
+ /* ENET */
+ MX6Q_PAD_ENET_MDIO__ENET_MDIO,
+ MX6Q_PAD_ENET_MDC__ENET_MDC,
+ MX6Q_PAD_ENET_RXD0__ENET_RDATA_0,
+ MX6Q_PAD_ENET_RXD1__ENET_RDATA_1,
+ MX6Q_PAD_ENET_RX_ER__ENET_RX_ER,
+ MX6Q_PAD_ENET_TX_EN__ENET_TX_EN,
+ MX6Q_PAD_ENET_TXD0__ENET_TDATA_0,
+ MX6Q_PAD_ENET_TXD1__ENET_TDATA_1,
+ MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN,
+ MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL,
+ MX6Q_PAD_ENET_REF_CLK__GPIO_1_23, /* Connected to GPIO_16 on TX6 v1 */
+ MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT,
+ MX6Q_PAD_SD3_DAT4__GPIO_7_1, /* Phy Interrupt */
+ MX6Q_PAD_SD3_DAT2__GPIO_7_6, /* Phy reset */
+ MX6Q_PAD_EIM_D20__GPIO_3_20, /* Phy power */
+
+ /* GPIO1 */
+
+ /* GPIO2 */
+
+ /* GPIO3 */
+
+ /* GPIO5 */
+
+ /* GPIO6 */
+
+ /* I2C1 */
+ MX6Q_PAD_EIM_D21__I2C1_SCL,
+ MX6Q_PAD_EIM_D28__I2C1_SDA,
+
+ /* I2C2 */
+
+ /* I2C3 */
+ MX6Q_PAD_GPIO_3__I2C3_SCL, /* GPIO1[3] */
+ MX6Q_PAD_GPIO_6__I2C3_SDA,
+
+ /* DISPLAY */
+ MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
+ MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15, /* DE */
+ MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2, /* HSync */
+ MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3, /* VSync */
+ MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4, /* Contrast */
+ MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
+ MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
+ MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
+ MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
+ MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
+ MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
+ MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
+ MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
+ MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
+ MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
+ MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
+ MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
+ MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
+ MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
+ MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
+ MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
+ MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
+ MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
+ MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
+ MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
+ MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
+ MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
+ MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
+ MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
+ MX6Q_PAD_EIM_D29__GPIO_3_29, /* Reset */
+ MX6Q_PAD_EIM_EB3__GPIO_2_31, /* Enable */
+
+ /* DISP_PWM */
+ MX6Q_PAD_GPIO_1__PWM2_PWMO,
+
+ /* UART1 for debug */
+ MX6Q_PAD_SD3_DAT7__UART1_TXD,
+ MX6Q_PAD_SD3_DAT6__UART1_RXD,
+
+ /* UART3 */
+
+ /* USBOTG ID pin */
+ MX6Q_PAD_EIM_D23__GPIO_3_23,
+
+ /* USB power pin */
+ MX6Q_PAD_GPIO_7__GPIO_1_7,
+ MX6Q_PAD_EIM_D31__GPIO_3_31,
+
+ /* USB OC pin */
+ MX6Q_PAD_GPIO_8__GPIO_1_8,
+ MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC,
+
+ /* USDHC1 */
+ MX6Q_PAD_SD1_CLK__USDHC1_CLK,
+ MX6Q_PAD_SD1_CMD__USDHC1_CMD,
+ MX6Q_PAD_SD1_DAT0__USDHC1_DAT0,
+ MX6Q_PAD_SD1_DAT1__USDHC1_DAT1,
+ MX6Q_PAD_SD1_DAT2__USDHC1_DAT2,
+ MX6Q_PAD_SD1_DAT3__USDHC1_DAT3,
+ MX6Q_PAD_SD3_CMD__GPIO_7_2, /* SD1_CD */
+
+ /* USDHC2 */
+ MX6Q_PAD_SD2_CLK__USDHC2_CLK,
+ MX6Q_PAD_SD2_CMD__USDHC2_CMD,
+ MX6Q_PAD_SD2_DAT0__USDHC2_DAT0,
+ MX6Q_PAD_SD2_DAT1__USDHC2_DAT1,
+ MX6Q_PAD_SD2_DAT2__USDHC2_DAT2,
+ MX6Q_PAD_SD2_DAT3__USDHC2_DAT3,
+ MX6Q_PAD_SD3_CLK__GPIO_7_3, /* SD2_CD */
+
+ /* DISP_RST_B */
+ /* DISP_PWR_EN */
+
+ /* EDT-FT5x06 Polytouch */
+#if defined(CONFIG_TOUCHSCREEN_EDT_FT5X06) || \
+ defined(CONFIG_TOUCHSCREEN_EDT_FT5X06_MODULE)
+ MX6Q_PAD_NANDF_CS2__GPIO_6_15, /* IRQ */
+ MX6Q_PAD_EIM_A16__GPIO_2_22, /* Reset */
+ MX6Q_PAD_EIM_A17__GPIO_2_21, /* Wake-Up */
+#endif
+};
+
+#define SNVS_LPCR 0x38
+static void mx6_snvs_poweroff(void)
+{
+
+ void __iomem *mx6_snvs_base = MX6_IO_ADDRESS(MX6Q_SNVS_BASE_ADDR);
+ u32 value;
+ value = readl(mx6_snvs_base + SNVS_LPCR);
+ /*set TOP and DP_EN bit*/
+ writel(value | 0x60, mx6_snvs_base + SNVS_LPCR);
+}
+
+static int __init early_enable_lcd_ldb(char *p)
+{
+ enable_lcd_ldb = 1;
+ return 0;
+}
+early_param("enable_lcd_ldb", early_enable_lcd_ldb);
+
+/*!
+ * Board specific initialization.
+ */
+static void __init tx6_board_init(void)
+{
+ int i;
+
+ mxc_iomux_v3_setup_multiple_pads(mx6q_tx6_pads,
+ ARRAY_SIZE(mx6q_tx6_pads));
+
+ gp_reg_id = tx6_dvfscore_data.reg_id;
+ soc_reg_id = tx6_dvfscore_data.soc_id;
+ pu_reg_id = tx6_dvfscore_data.pu_id;
+ mx6q_tx6_init_uart();
+
+ imx6q_add_ipuv3(0, &ipu_data[0]);
+ if (cpu_is_mx6q()) {
+ imx6q_add_ipuv3(1, &ipu_data[1]);
+ for (i = 0; i < ARRAY_SIZE(tx6_fb_data); i++)
+ imx6q_add_ipuv3fb(i, &tx6_fb_data[i]);
+ } else
+ for (i = 0; i < (ARRAY_SIZE(tx6_fb_data) + 1) / 2; i++)
+ imx6q_add_ipuv3fb(i, &tx6_fb_data[i]);
+
+ imx6q_add_vdoa();
+ imx6q_add_lcdif(&lcdif_data);
+ imx6q_add_ldb(&ldb_data);
+ imx6q_add_v4l2_output(0);
+ imx6q_add_imx_snvs_rtc();
+ imx6q_tx6_init_edt_ft5x06();
+
+ imx6q_add_imx_caam();
+
+ platform_device_register(&tx6_gpio_led_device);
+
+ i2c_register_board_info(0, mxc_i2c0_board_info,
+ ARRAY_SIZE(mxc_i2c0_board_info));
+ i2c_register_board_info(2, mxc_i2c2_board_info,
+ ARRAY_SIZE(mxc_i2c2_board_info));
+ imx6q_add_imx_i2c(0, &mx6q_tx6_i2c_data);
+ imx6q_add_imx_i2c(2, &mx6q_tx6_i2c_data);
+ /* SPI */
+ spi_register_board_info(tx6_spi_board_info,
+ ARRAY_SIZE(tx6_spi_board_info));
+ imx6q_add_ecspi(0, &mx6q_tx6_spi_data);
+
+ imx6q_add_anatop_thermal_imx(1, &mx6q_tx6_anatop_thermal_data);
+ imx6_init_fec(fec_data);
+ imx6q_add_pm_imx(0, &mx6q_tx6_pm_data);
+
+ imx6q_add_sdhci_usdhc_imx(0, &mx6q_tx6_sd1_data);
+ imx6q_add_sdhci_usdhc_imx(1, &mx6q_tx6_sd2_data);
+ imx_add_viv_gpu(&imx6_gpu_data, &imx6q_gpu_pdata);
+ if (tx6_flexcan_init() == 0) {
+ imx6q_add_flexcan0(&mx6q_tx6_flexcan_pdata[0]);
+ imx6q_add_flexcan1(&mx6q_tx6_flexcan_pdata[1]);
+ } else {
+ imx6q_add_flexcan1(NULL);
+ }
+ imx6q_tx6_init_usb();
+ imx6q_add_vpu();
+ imx6q_init_audio();
+ imx_asrc_data.asrc_core_clk = clk_get(NULL, "asrc_clk");
+ imx_asrc_data.asrc_audio_clk = clk_get(NULL, "asrc_serial_clk");
+ imx6q_add_asrc(&imx_asrc_data);
+
+ tx6_pwm_register();
+
+ imx6q_add_otp();
+ imx6q_add_viim();
+ imx6q_add_imx2_wdt(0, NULL);
+ imx6q_add_dma();
+
+ imx6q_add_gpmi(&mx6q_gpmi_nand_platform_data);
+
+ imx6q_add_dvfs_core(&tx6_dvfscore_data);
+
+#ifndef CONFIG_MX6_INTER_LDO_BYPASS
+ /* mx6_cpu_regulator_init(); */
+#endif
+
+ pm_power_off = mx6_snvs_poweroff;
+ imx6q_add_busfreq();
+
+ /* Add PCIe RC interface support */
+
+ imx6_add_armpmu();
+ imx6q_add_perfmon(0);
+ imx6q_add_perfmon(1);
+ imx6q_add_perfmon(2);
+}
+
+extern void __iomem *twd_base;
+static void __init tx6_timer_init(void)
+{
+ struct clk *uart_clk;
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = ioremap(LOCAL_TWD_ADDR, SZ_256);
+ BUG_ON(!twd_base);
+#endif
+ mx6_clocks_init(32768, 24000000, 0, 0);
+
+ uart_clk = clk_get_sys("imx-uart.0", NULL);
+ early_console_setup(UART1_BASE_ADDR, uart_clk);
+}
+
+static struct sys_timer tx6_timer = {
+ .init = tx6_timer_init,
+};
+
+static void __init tx6_reserve(void)
+{
+#if defined(CONFIG_MXC_GPU_VIV) || defined(CONFIG_MXC_GPU_VIV_MODULE)
+ phys_addr_t phys;
+
+ if (imx6q_gpu_pdata.reserved_mem_size) {
+ phys = memblock_alloc_base(imx6q_gpu_pdata.reserved_mem_size,
+ SZ_4K, SZ_1G);
+ memblock_remove(phys, imx6q_gpu_pdata.reserved_mem_size);
+ imx6q_gpu_pdata.reserved_mem_base = phys;
+ }
+#endif
+}
+
+/*
+ * initialize __mach_desc_TX6 data structure.
+ */
+MACHINE_START(TX6, "Ka-Ro i.MX 6Quad TX6")
+ /* Maintainer: Ka-Ro electronics GmbH */
+ .boot_params = MX6_PHYS_OFFSET + 0x100,
+ .fixup = fixup_mxc_board,
+ .map_io = mx6_map_io,
+ .init_irq = mx6_init_irq,
+ .init_machine = tx6_board_init,
+ .timer = &tx6_timer,
+ .reserve = tx6_reserve,
+MACHINE_END
projects / karo-tx-linux.git / commitdiff