return SCI_FAILURE;
}
-/**
- * scic_sds_port_add_phy() -
- * @sci_port: This parameter specifies the port in which the phy will be added.
- * @sci_phy: This parameter is the phy which is to be added to the port.
- *
- * This method will add a PHY to the selected port. This method returns an
- * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other status
- * is failre to add the phy to the port.
- */
-enum sci_status scic_sds_port_add_phy(
- struct scic_sds_port *sci_port,
- struct scic_sds_phy *sci_phy)
-{
- return sci_port->state_handlers->add_phy_handler(
- sci_port, sci_phy);
-}
-
-
-/**
- * scic_sds_port_remove_phy() -
- * @sci_port: This parameter specifies the port in which the phy will be added.
- * @sci_phy: This parameter is the phy which is to be added to the port.
- *
- * This method will remove the PHY from the selected PORT. This method returns
- * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any other
- * status is failre to add the phy to the port.
- */
-enum sci_status scic_sds_port_remove_phy(
- struct scic_sds_port *sci_port,
- struct scic_sds_phy *sci_phy)
-{
- return sci_port->state_handlers->remove_phy_handler(
- sci_port, sci_phy);
-}
/**
* This method requests the SAS address for the supplied SAS port from the SCI
return SCI_SUCCESS;
}
-/**
- * scic_port_hard_reset() - perform port hard reset
- * @port: a handle corresponding to the SAS port to be hard reset.
- * @reset_timeout: This parameter specifies the number of milliseconds in which
- * the port reset operation should complete.
- *
- * The SCI User callback in scic_user_callbacks_t will only be called once for
- * each phy in the SAS Port at completion of the hard reset sequence. Return a
- * status indicating whether the hard reset started successfully. SCI_SUCCESS
- * This value is returned if the hard reset operation started successfully.
- */
-static enum sci_status scic_port_hard_reset(struct scic_sds_port *port,
- u32 reset_timeout)
-{
- return port->state_handlers->reset_handler(
- port, reset_timeout);
-}
/**
* This method assigns the direct attached device ID for this port.
return SCI_SUCCESS;
}
-static enum sci_status scic_sds_port_ready_substate_add_phy_handler(struct scic_sds_port *sci_port,
- struct scic_sds_phy *sci_phy)
-{
- enum sci_status status;
-
- status = scic_sds_port_set_phy(sci_port, sci_phy);
-
- if (status != SCI_SUCCESS)
- return status;
-
- scic_sds_port_general_link_up_handler(sci_port, sci_phy, true);
- sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
- port_state_machine_change(sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
-
- return status;
-}
-
-
-static enum sci_status scic_sds_port_ready_substate_remove_phy_handler(struct scic_sds_port *port,
- struct scic_sds_phy *phy)
-{
- enum sci_status status;
-
- status = scic_sds_port_clear_phy(port, phy);
-
- if (status != SCI_SUCCESS)
- return status;
-
- scic_sds_port_deactivate_phy(port, phy, true);
-
- port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
-
- port_state_machine_change(port,
- SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
- return status;
-}
-
-/*
- * ****************************************************************************
- * * READY SUBSTATE WAITING HANDLERS
- * **************************************************************************** */
-
/**
*
* @sci_port: This is the struct scic_sds_port object that which has a phy that has
return SCI_FAILURE_INVALID_STATE;
}
-/*
- * ****************************************************************************
- * * READY SUBSTATE OPERATIONAL HANDLERS
- * **************************************************************************** */
-
-/*
- * This method will casue the port to reset. enum sci_status SCI_SUCCESS
- */
-static enum
-sci_status scic_sds_port_ready_operational_substate_reset_handler(
- struct scic_sds_port *port,
- u32 timeout)
-{
- enum sci_status status = SCI_FAILURE_INVALID_PHY;
- u32 phy_index;
- struct scic_sds_phy *selected_phy = NULL;
-
-
- /* Select a phy on which we can send the hard reset request. */
- for (phy_index = 0;
- (phy_index < SCI_MAX_PHYS) && (selected_phy == NULL);
- phy_index++) {
- selected_phy = port->phy_table[phy_index];
-
- if ((selected_phy != NULL) &&
- !scic_sds_port_active_phy(port, selected_phy)) {
- /*
- * We found a phy but it is not ready select
- * different phy
- */
- selected_phy = NULL;
- }
- }
-
- /* If we have a phy then go ahead and start the reset procedure */
- if (selected_phy != NULL) {
- status = scic_sds_phy_reset(selected_phy);
-
- if (status == SCI_SUCCESS) {
- isci_timer_start(port->timer_handle, timeout);
- port->not_ready_reason =
- SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED;
-
- port_state_machine_change(port,
- SCI_BASE_PORT_STATE_RESETTING);
- }
- }
-
- return status;
-}
-
/**
* scic_sds_port_ready_operational_substate_link_up_handler() -
* @sci_port: This is the struct scic_sds_port object that which has a phy that has
return SCI_SUCCESS;
}
-/*
- * ****************************************************************************
- * * READY SUBSTATE OPERATIONAL HANDLERS
- * **************************************************************************** */
-
-/*
- * This is the default method for a port add phy request. It will report a
- * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE
- */
-static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler(
- struct scic_sds_port *port,
- struct scic_sds_phy *phy)
-{
- enum sci_status status;
-
- status = scic_sds_port_set_phy(port, phy);
-
- if (status == SCI_SUCCESS) {
- scic_sds_port_general_link_up_handler(port, phy, true);
-
- /*
- * Re-enter the configuring state since this may be the last phy in
- * the port. */
- port_state_machine_change(port,
- SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
- }
-
- return status;
-}
-
-/*
- * This is the default method for a port remove phy request. It will report a
- * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE
- */
-static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handler(
- struct scic_sds_port *port,
- struct scic_sds_phy *phy)
-{
- enum sci_status status;
-
- status = scic_sds_port_clear_phy(port, phy);
-
- if (status != SCI_SUCCESS)
- return status;
- scic_sds_port_deactivate_phy(port, phy, true);
-
- /* Re-enter the configuring state since this may be the last phy in
- * the port
- */
- port_state_machine_change(port,
- SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
-
- return status;
-}
-
/**
* scic_sds_port_ready_configuring_substate_complete_io_handler() -
* @port: This is the port that is being requested to complete the io request.
return SCI_FAILURE_INVALID_STATE;
}
-static enum sci_status
-scic_sds_port_default_reset_handler(struct scic_sds_port *sci_port,
- u32 timeout)
-{
- return default_port_handler(sci_port, __func__);
-}
-
-static enum sci_status
-scic_sds_port_default_add_phy_handler(struct scic_sds_port *sci_port,
- struct scic_sds_phy *base_phy)
-{
- return default_port_handler(sci_port, __func__);
-}
-
-static enum sci_status
-scic_sds_port_default_remove_phy_handler(struct scic_sds_port *sci_port,
- struct scic_sds_phy *base_phy)
-{
- return default_port_handler(sci_port, __func__);
-}
-
/*
* This is the default method for a port unsolicited frame request. It will
* report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even
return SCI_SUCCESS;
}
-/*
- * This method takes the struct scic_sds_port that is in a stopped state and handles
- * the add phy request. In MPC mode the only time a phy can be added to a port
- * is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status
- * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not
- * be added to the port. SCI_SUCCESS if the phy is added to the port.
- */
-static enum sci_status scic_sds_port_stopped_state_add_phy_handler(
- struct scic_sds_port *port,
- struct scic_sds_phy *phy)
-{
- struct sci_sas_address port_sas_address;
-
- /* Read the port assigned SAS Address if there is one */
- scic_sds_port_get_sas_address(port, &port_sas_address);
-
- if (port_sas_address.high != 0 && port_sas_address.low != 0) {
- struct sci_sas_address phy_sas_address;
-
- /*
- * Make sure that the PHY SAS Address matches the SAS Address
- * for this port. */
- scic_sds_phy_get_sas_address(phy, &phy_sas_address);
-
- if (
- (port_sas_address.high != phy_sas_address.high)
- || (port_sas_address.low != phy_sas_address.low)
- ) {
- return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
- }
- }
-
- return scic_sds_port_set_phy(port, phy);
-}
-
-/*
- * This method takes the struct scic_sds_port that is in a stopped state and handles
- * the remove phy request. In MPC mode the only time a phy can be removed from
- * a port is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status
- * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not
- * be added to the port. SCI_SUCCESS if the phy is added to the port.
- */
-static enum sci_status scic_sds_port_stopped_state_remove_phy_handler(
- struct scic_sds_port *port,
- struct scic_sds_phy *phy)
-{
- return scic_sds_port_clear_phy(port, phy);
-}
-
-/*
- * ****************************************************************************
- * * READY STATE HANDLERS
- * **************************************************************************** */
-
-/*
- * ****************************************************************************
- * * RESETTING STATE HANDLERS
- * **************************************************************************** */
-
-/*
- * ****************************************************************************
- * * STOPPING STATE HANDLERS
- * **************************************************************************** */
-
/*
* This method takes the struct scic_sds_port that is in a stopping state and handles
* the complete io request. Should the request count reach 0 then the port
}
}
+static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 timeout)
+{
+ enum sci_status status = SCI_FAILURE_INVALID_PHY;
+ struct scic_sds_phy *selected_phy = NULL;
+ enum scic_sds_port_states state;
+ u32 phy_index;
+
+ state = sci_port->state_machine.current_state_id;
+ if (state != SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL) {
+ dev_warn(sciport_to_dev(sci_port),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ /* Select a phy on which we can send the hard reset request. */
+ for (phy_index = 0; phy_index < SCI_MAX_PHYS && !selected_phy; phy_index++) {
+ selected_phy = sci_port->phy_table[phy_index];
+ if (selected_phy &&
+ !scic_sds_port_active_phy(sci_port, selected_phy)) {
+ /*
+ * We found a phy but it is not ready select
+ * different phy
+ */
+ selected_phy = NULL;
+ }
+ }
+
+ /* If we have a phy then go ahead and start the reset procedure */
+ if (!selected_phy)
+ return status;
+ status = scic_sds_phy_reset(selected_phy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ isci_timer_start(sci_port->timer_handle, timeout);
+ sci_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED;
+
+ port_state_machine_change(sci_port,
+ SCI_BASE_PORT_STATE_RESETTING);
+ return SCI_SUCCESS;
+}
+
+/**
+ * scic_sds_port_add_phy() -
+ * @sci_port: This parameter specifies the port in which the phy will be added.
+ * @sci_phy: This parameter is the phy which is to be added to the port.
+ *
+ * This method will add a PHY to the selected port. This method returns an
+ * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other
+ * status is a failure to add the phy to the port.
+ */
+enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port,
+ struct scic_sds_phy *sci_phy)
+{
+ enum sci_status status;
+ enum scic_sds_port_states state;
+
+ state = sci_port->state_machine.current_state_id;
+ switch (state) {
+ case SCI_BASE_PORT_STATE_STOPPED: {
+ struct sci_sas_address port_sas_address;
+
+ /* Read the port assigned SAS Address if there is one */
+ scic_sds_port_get_sas_address(sci_port, &port_sas_address);
+
+ if (port_sas_address.high != 0 && port_sas_address.low != 0) {
+ struct sci_sas_address phy_sas_address;
+
+ /* Make sure that the PHY SAS Address matches the SAS Address
+ * for this port
+ */
+ scic_sds_phy_get_sas_address(sci_phy, &phy_sas_address);
+
+ if (port_sas_address.high != phy_sas_address.high ||
+ port_sas_address.low != phy_sas_address.low)
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+ return scic_sds_port_set_phy(sci_port, sci_phy);
+ }
+ case SCIC_SDS_PORT_READY_SUBSTATE_WAITING:
+ case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL:
+ status = scic_sds_port_set_phy(sci_port, sci_phy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ scic_sds_port_general_link_up_handler(sci_port, sci_phy, true);
+ sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
+ port_state_machine_change(sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
+
+ return status;
+ case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING:
+ status = scic_sds_port_set_phy(sci_port, sci_phy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+ scic_sds_port_general_link_up_handler(sci_port, sci_phy, true);
+
+ /* Re-enter the configuring state since this may be the last phy in
+ * the port.
+ */
+ port_state_machine_change(sci_port,
+ SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(sci_port),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+/**
+ * scic_sds_port_remove_phy() -
+ * @sci_port: This parameter specifies the port in which the phy will be added.
+ * @sci_phy: This parameter is the phy which is to be added to the port.
+ *
+ * This method will remove the PHY from the selected PORT. This method returns
+ * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any
+ * other status is a failure to add the phy to the port.
+ */
+enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port,
+ struct scic_sds_phy *sci_phy)
+{
+ enum sci_status status;
+ enum scic_sds_port_states state;
+
+ state = sci_port->state_machine.current_state_id;
+
+ switch (state) {
+ case SCI_BASE_PORT_STATE_STOPPED:
+ return scic_sds_port_clear_phy(sci_port, sci_phy);
+ case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL:
+ status = scic_sds_port_clear_phy(sci_port, sci_phy);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ scic_sds_port_deactivate_phy(sci_port, sci_phy, true);
+ sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
+ port_state_machine_change(sci_port,
+ SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
+ return SCI_SUCCESS;
+ case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING:
+ status = scic_sds_port_clear_phy(sci_port, sci_phy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+ scic_sds_port_deactivate_phy(sci_port, sci_phy, true);
+
+ /* Re-enter the configuring state since this may be the last phy in
+ * the port
+ */
+ port_state_machine_change(sci_port,
+ SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
+
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(sci_port),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = {
[SCI_BASE_PORT_STATE_STOPPED] = {
- .reset_handler = scic_sds_port_default_reset_handler,
- .add_phy_handler = scic_sds_port_stopped_state_add_phy_handler,
- .remove_phy_handler = scic_sds_port_stopped_state_remove_phy_handler,
.frame_handler = scic_sds_port_default_frame_handler,
.event_handler = scic_sds_port_default_event_handler,
.link_up_handler = scic_sds_port_default_link_up_handler,
.complete_io_handler = scic_sds_port_default_complete_io_handler
},
[SCI_BASE_PORT_STATE_STOPPING] = {
- .reset_handler = scic_sds_port_default_reset_handler,
- .add_phy_handler = scic_sds_port_default_add_phy_handler,
- .remove_phy_handler = scic_sds_port_default_remove_phy_handler,
.frame_handler = scic_sds_port_default_frame_handler,
.event_handler = scic_sds_port_default_event_handler,
.link_up_handler = scic_sds_port_default_link_up_handler,
.complete_io_handler = scic_sds_port_stopping_state_complete_io_handler
},
[SCI_BASE_PORT_STATE_READY] = {
- .reset_handler = scic_sds_port_default_reset_handler,
- .add_phy_handler = scic_sds_port_default_add_phy_handler,
- .remove_phy_handler = scic_sds_port_default_remove_phy_handler,
.frame_handler = scic_sds_port_default_frame_handler,
.event_handler = scic_sds_port_default_event_handler,
.link_up_handler = scic_sds_port_default_link_up_handler,
.complete_io_handler = scic_sds_port_general_complete_io_handler
},
[SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = {
- .reset_handler = scic_sds_port_default_reset_handler,
- .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler,
- .remove_phy_handler = scic_sds_port_default_remove_phy_handler,
.frame_handler = scic_sds_port_default_frame_handler,
.event_handler = scic_sds_port_default_event_handler,
.link_up_handler = scic_sds_port_ready_waiting_substate_link_up_handler,
.complete_io_handler = scic_sds_port_ready_substate_complete_io_handler,
},
[SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = {
- .reset_handler = scic_sds_port_ready_operational_substate_reset_handler,
- .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler,
- .remove_phy_handler = scic_sds_port_ready_substate_remove_phy_handler,
.frame_handler = scic_sds_port_default_frame_handler,
.event_handler = scic_sds_port_default_event_handler,
.link_up_handler = scic_sds_port_ready_operational_substate_link_up_handler,
.complete_io_handler = scic_sds_port_ready_substate_complete_io_handler,
},
[SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = {
- .reset_handler = scic_sds_port_default_reset_handler,
- .add_phy_handler = scic_sds_port_ready_configuring_substate_add_phy_handler,
- .remove_phy_handler = scic_sds_port_ready_configuring_substate_remove_phy_handler,
.frame_handler = scic_sds_port_default_frame_handler,
.event_handler = scic_sds_port_default_event_handler,
.link_up_handler = scic_sds_port_default_link_up_handler,
.complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler
},
[SCI_BASE_PORT_STATE_RESETTING] = {
- .reset_handler = scic_sds_port_default_reset_handler,
- .add_phy_handler = scic_sds_port_default_add_phy_handler,
- .remove_phy_handler = scic_sds_port_default_remove_phy_handler,
.frame_handler = scic_sds_port_default_frame_handler,
.event_handler = scic_sds_port_default_event_handler,
.link_up_handler = scic_sds_port_reset_state_link_up_handler,
.complete_io_handler = scic_sds_port_general_complete_io_handler
},
[SCI_BASE_PORT_STATE_FAILED] = {
- .reset_handler = scic_sds_port_default_reset_handler,
- .add_phy_handler = scic_sds_port_default_add_phy_handler,
- .remove_phy_handler = scic_sds_port_default_remove_phy_handler,
.frame_handler = scic_sds_port_default_frame_handler,
.event_handler = scic_sds_port_default_event_handler,
.link_up_handler = scic_sds_port_default_link_up_handler,
projects / karo-tx-linux.git / commitdiff