--- /dev/null
+What: /sys/bus/scsi/drivers/st/debug_flag
+Date: October 2015
+Kernel Version: ?.?
+Contact: shane.seymour@hpe.com
+Description:
+ This file allows you to turn debug output from the st driver
+ off if you write a '0' to the file or on if you write a '1'.
+ Note that debug output requires that the module be compiled
+ with the #define DEBUG set to a non-zero value (this is the
+ default). If DEBUG is set to 0 then this file will not
+ appear in sysfs as its presence is conditional upon debug
+ output support being compiled into the module.
--- /dev/null
+* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
+
+UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
+Each UFS PHY node should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS PHY node.
+
+Required properties:
+- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm"
+ or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
+- reg : should contain PHY register address space (mandatory),
+- reg-names : indicates various resources passed to driver (via reg proptery) by name.
+ Required "reg-names" is "phy_mem".
+- #phy-cells : This property shall be set to 0
+- vdda-phy-supply : phandle to main PHY supply for analog domain
+- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "ref_clk_src", "ref_clk",
+ "tx_iface_clk" & "rx_iface_clk" are mandatory but
+ "ref_clk_parent" is optional
+
+Optional properties:
+- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
+- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
+- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
+- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
+- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
+
+Example:
+
+ ufsphy1: ufsphy@0xfc597000 {
+ compatible = "qcom,ufs-phy-qmp-20nm";
+ reg = <0xfc597000 0x800>;
+ reg-names = "phy_mem";
+ #phy-cells = <0>;
+ vdda-phy-supply = <&pma8084_l4>;
+ vdda-pll-supply = <&pma8084_l12>;
+ vdda-phy-max-microamp = <50000>;
+ vdda-pll-max-microamp = <1000>;
+ clock-names = "ref_clk_src",
+ "ref_clk_parent",
+ "ref_clk",
+ "tx_iface_clk",
+ "rx_iface_clk";
+ clocks = <&clock_rpm clk_ln_bb_clk>,
+ <&clock_gcc clk_pcie_1_phy_ldo >,
+ <&clock_gcc clk_ufs_phy_ldo>,
+ <&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
+ <&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
+ };
+
+ ufshc@0xfc598000 {
+ ...
+ phys = <&ufsphy1>;
+ phy-names = "ufsphy";
+ };
Each UFS controller instance should have its own node.
Required properties:
-- compatible : compatible list, contains "jedec,ufs-1.1"
+- compatible : must contain "jedec,ufs-1.1", may also list one or more
+ of the following:
+ "qcom,msm8994-ufshc"
+ "qcom,msm8996-ufshc"
+ "qcom,ufshc"
- interrupts : <interrupt mapping for UFS host controller IRQ>
- reg : <registers mapping>
Optional properties:
+- phys : phandle to UFS PHY node
+- phy-names : the string "ufsphy" when is found in a node, along
+ with "phys" attribute, provides phandle to UFS PHY node
- vdd-hba-supply : phandle to UFS host controller supply regulator node
- vcc-supply : phandle to VCC supply regulator node
- vccq-supply : phandle to VCCQ supply regulator node
clocks = <&core 0>, <&ref 0>, <&iface 0>;
clock-names = "core_clk", "ref_clk", "iface_clk";
freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+ phys = <&ufsphy1>;
+ phy-names = "ufsphy";
};
with the kernel module parameter debug_flag defaulting to 0. Debugging
can still be switched on and off with an ioctl. To enable debug at
module load time add debug_flag=1 to the module load options, the
-debugging output is not voluminous.
+debugging output is not voluminous. Debugging can also be enabled
+and disabled by writing a '0' (disable) or '1' (enable) to the sysfs
+file /sys/bus/scsi/drivers/st/debug_flag.
If the tape seems to hang, I would be very interested to hear where
the driver is waiting. With the command 'ps -l' you can see the state
*/
shost->max_host_blocked = 1;
- if (scsi_init_shared_tag_map(shost, host->n_tags))
- goto err_add;
-
rc = scsi_add_host_with_dma(ap->scsi_host,
&ap->tdev, ap->host->dev);
if (rc)
.cmd_per_lun = SRP_DEFAULT_CMD_SQ_SIZE,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = srp_host_attrs,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
if (ret)
goto out;
- ret = scsi_init_shared_tag_map(target_host, target_host->can_queue);
- if (ret)
- goto out;
-
target->req_ring_size = target->queue_size - SRP_TSK_MGMT_SQ_SIZE;
if (!srp_conn_unique(target->srp_host, target)) {
int i, buflist_ent;
int sg_spill = MAX_FRAGS_SPILL1;
int dir;
+
+ if (bytes < 0)
+ return NULL;
+
/* initialization */
*frags = 0;
*blp = NULL;
.cmd_per_lun = 7,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = mptscsih_host_attrs,
- .use_blk_tags = 1,
};
static int mptsas_get_linkerrors(struct sas_phy *phy)
tpnt->slave_destroy = NCR_700_slave_destroy;
tpnt->slave_alloc = NCR_700_slave_alloc;
tpnt->change_queue_depth = NCR_700_change_queue_depth;
- tpnt->use_blk_tags = 1;
if(tpnt->name == NULL)
tpnt->name = "53c700";
BUG();
}
if(hostdata->msgin[1] == A_SIMPLE_TAG_MSG) {
- struct scsi_cmnd *SCp = scsi_find_tag(SDp, hostdata->msgin[2]);
+ struct scsi_cmnd *SCp;
+
+ SCp = scsi_host_find_tag(SDp->host, hostdata->msgin[2]);
if(unlikely(SCp == NULL)) {
printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n",
host->host_no, reselection_id, lun, hostdata->msgin[2]);
"reselection is tag %d, slot %p(%d)\n",
hostdata->msgin[2], slot, slot->tag);
} else {
- struct scsi_cmnd *SCp = scsi_find_tag(SDp, SCSI_NO_TAG);
+ struct scsi_cmnd *SCp;
+
+ SCp = scsi_host_find_tag(SDp->host, SCSI_NO_TAG);
if(unlikely(SCp == NULL)) {
sdev_printk(KERN_ERR, SDp,
"no saved request for untagged cmd\n");
slot->tag, slot);
} else {
slot->tag = SCSI_NO_TAG;
- /* must populate current_cmnd for scsi_find_tag to work */
+ /* must populate current_cmnd for scsi_host_find_tag to work */
SCp->device->current_cmnd = SCp;
}
/* sanity check: some of the commands generated by the mid-layer
*
*---------------------------------------------------------------------*/
-static void FPT_SccbMgrTableInitAll()
+static void FPT_SccbMgrTableInitAll(void)
{
unsigned char thisCard;
source "drivers/scsi/esas2r/Kconfig"
source "drivers/scsi/megaraid/Kconfig.megaraid"
-source "drivers/scsi/mpt2sas/Kconfig"
source "drivers/scsi/mpt3sas/Kconfig"
source "drivers/scsi/ufs/Kconfig"
obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
-obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/
obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
obj-$(CONFIG_SCSI_UFSHCD) += ufs/
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
" 0=off, 1=on");
module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(msi, "IRQ handling."
- " 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
+ " 0=PIC(default), 1=MSI, 2=MSI-X)");
module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
" adapter to have it's kernel up and\n"
status = aac_fib_send(ContainerCommand,
cmd_fibcontext,
- sizeof (struct aac_get_name),
+ sizeof(struct aac_get_name_resp),
FsaNormal,
0, 1,
(fib_callback)get_container_name_callback,
status = aac_fib_send(ContainerCommand,
cmd_fibcontext,
- sizeof (struct aac_get_serial),
+ sizeof(struct aac_get_serial_resp),
FsaNormal,
0, 1,
(fib_callback) get_container_serial_callback,
return;
BUG_ON(fibptr == NULL);
-
dev = fibptr->dev;
- srbreply = (struct aac_srb_reply *) fib_data(fibptr);
+ scsi_dma_unmap(scsicmd);
+ /* expose physical device if expose_physicald flag is on */
+ if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
+ && expose_physicals > 0)
+ aac_expose_phy_device(scsicmd);
+
+ srbreply = (struct aac_srb_reply *) fib_data(fibptr);
scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */
if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
*/
scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
- le32_to_cpu(srbreply->data_xfer_length));
- }
-
- scsi_dma_unmap(scsicmd);
-
- /* expose physical device if expose_physicald flag is on */
- if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
- && expose_physicals > 0)
- aac_expose_phy_device(scsicmd);
+ /*
+ * First check the fib status
+ */
- /*
- * First check the fib status
- */
+ if (le32_to_cpu(srbreply->status) != ST_OK) {
+ int len;
- if (le32_to_cpu(srbreply->status) != ST_OK){
- int len;
- printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
- len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
- SCSI_SENSE_BUFFERSIZE);
- scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
- memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
- }
+ printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
+ len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+ SCSI_SENSE_BUFFERSIZE);
+ scsicmd->result = DID_ERROR << 16
+ | COMMAND_COMPLETE << 8
+ | SAM_STAT_CHECK_CONDITION;
+ memcpy(scsicmd->sense_buffer,
+ srbreply->sense_data, len);
+ }
- /*
- * Next check the srb status
- */
- switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
- case SRB_STATUS_ERROR_RECOVERY:
- case SRB_STATUS_PENDING:
- case SRB_STATUS_SUCCESS:
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
- break;
- case SRB_STATUS_DATA_OVERRUN:
- switch(scsicmd->cmnd[0]){
- case READ_6:
- case WRITE_6:
- case READ_10:
- case WRITE_10:
- case READ_12:
- case WRITE_12:
- case READ_16:
- case WRITE_16:
- if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
- printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
- } else {
- printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+ /*
+ * Next check the srb status
+ */
+ switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
+ case SRB_STATUS_ERROR_RECOVERY:
+ case SRB_STATUS_PENDING:
+ case SRB_STATUS_SUCCESS:
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ break;
+ case SRB_STATUS_DATA_OVERRUN:
+ switch (scsicmd->cmnd[0]) {
+ case READ_6:
+ case WRITE_6:
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_16:
+ case WRITE_16:
+ if (le32_to_cpu(srbreply->data_xfer_length)
+ < scsicmd->underflow)
+ printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
+ else
+ printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+ scsicmd->result = DID_ERROR << 16
+ | COMMAND_COMPLETE << 8;
+ break;
+ case INQUIRY: {
+ scsicmd->result = DID_OK << 16
+ | COMMAND_COMPLETE << 8;
+ break;
+ }
+ default:
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ break;
}
- scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
break;
- case INQUIRY: {
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ case SRB_STATUS_ABORTED:
+ scsicmd->result = DID_ABORT << 16 | ABORT << 8;
break;
- }
- default:
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ case SRB_STATUS_ABORT_FAILED:
+ /*
+ * Not sure about this one - but assuming the
+ * hba was trying to abort for some reason
+ */
+ scsicmd->result = DID_ERROR << 16 | ABORT << 8;
+ break;
+ case SRB_STATUS_PARITY_ERROR:
+ scsicmd->result = DID_PARITY << 16
+ | MSG_PARITY_ERROR << 8;
+ break;
+ case SRB_STATUS_NO_DEVICE:
+ case SRB_STATUS_INVALID_PATH_ID:
+ case SRB_STATUS_INVALID_TARGET_ID:
+ case SRB_STATUS_INVALID_LUN:
+ case SRB_STATUS_SELECTION_TIMEOUT:
+ scsicmd->result = DID_NO_CONNECT << 16
+ | COMMAND_COMPLETE << 8;
break;
- }
- break;
- case SRB_STATUS_ABORTED:
- scsicmd->result = DID_ABORT << 16 | ABORT << 8;
- break;
- case SRB_STATUS_ABORT_FAILED:
- // Not sure about this one - but assuming the hba was trying to abort for some reason
- scsicmd->result = DID_ERROR << 16 | ABORT << 8;
- break;
- case SRB_STATUS_PARITY_ERROR:
- scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
- break;
- case SRB_STATUS_NO_DEVICE:
- case SRB_STATUS_INVALID_PATH_ID:
- case SRB_STATUS_INVALID_TARGET_ID:
- case SRB_STATUS_INVALID_LUN:
- case SRB_STATUS_SELECTION_TIMEOUT:
- scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
- break;
- case SRB_STATUS_COMMAND_TIMEOUT:
- case SRB_STATUS_TIMEOUT:
- scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
- break;
+ case SRB_STATUS_COMMAND_TIMEOUT:
+ case SRB_STATUS_TIMEOUT:
+ scsicmd->result = DID_TIME_OUT << 16
+ | COMMAND_COMPLETE << 8;
+ break;
- case SRB_STATUS_BUSY:
- scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
- break;
+ case SRB_STATUS_BUSY:
+ scsicmd->result = DID_BUS_BUSY << 16
+ | COMMAND_COMPLETE << 8;
+ break;
- case SRB_STATUS_BUS_RESET:
- scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
- break;
+ case SRB_STATUS_BUS_RESET:
+ scsicmd->result = DID_RESET << 16
+ | COMMAND_COMPLETE << 8;
+ break;
- case SRB_STATUS_MESSAGE_REJECTED:
- scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
- break;
- case SRB_STATUS_REQUEST_FLUSHED:
- case SRB_STATUS_ERROR:
- case SRB_STATUS_INVALID_REQUEST:
- case SRB_STATUS_REQUEST_SENSE_FAILED:
- case SRB_STATUS_NO_HBA:
- case SRB_STATUS_UNEXPECTED_BUS_FREE:
- case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
- case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
- case SRB_STATUS_DELAYED_RETRY:
- case SRB_STATUS_BAD_FUNCTION:
- case SRB_STATUS_NOT_STARTED:
- case SRB_STATUS_NOT_IN_USE:
- case SRB_STATUS_FORCE_ABORT:
- case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
- default:
+ case SRB_STATUS_MESSAGE_REJECTED:
+ scsicmd->result = DID_ERROR << 16
+ | MESSAGE_REJECT << 8;
+ break;
+ case SRB_STATUS_REQUEST_FLUSHED:
+ case SRB_STATUS_ERROR:
+ case SRB_STATUS_INVALID_REQUEST:
+ case SRB_STATUS_REQUEST_SENSE_FAILED:
+ case SRB_STATUS_NO_HBA:
+ case SRB_STATUS_UNEXPECTED_BUS_FREE:
+ case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+ case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+ case SRB_STATUS_DELAYED_RETRY:
+ case SRB_STATUS_BAD_FUNCTION:
+ case SRB_STATUS_NOT_STARTED:
+ case SRB_STATUS_NOT_IN_USE:
+ case SRB_STATUS_FORCE_ABORT:
+ case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
+ default:
#ifdef AAC_DETAILED_STATUS_INFO
- printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
- le32_to_cpu(srbreply->srb_status) & 0x3F,
- aac_get_status_string(
- le32_to_cpu(srbreply->srb_status) & 0x3F),
- scsicmd->cmnd[0],
- le32_to_cpu(srbreply->scsi_status));
+ printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
+ le32_to_cpu(srbreply->srb_status) & 0x3F,
+ aac_get_status_string(
+ le32_to_cpu(srbreply->srb_status) & 0x3F),
+ scsicmd->cmnd[0],
+ le32_to_cpu(srbreply->scsi_status));
#endif
- if ((scsicmd->cmnd[0] == ATA_12)
- || (scsicmd->cmnd[0] == ATA_16)) {
- if (scsicmd->cmnd[2] & (0x01 << 5)) {
- scsicmd->result = DID_OK << 16
- | COMMAND_COMPLETE << 8;
+ if ((scsicmd->cmnd[0] == ATA_12)
+ || (scsicmd->cmnd[0] == ATA_16)) {
+ if (scsicmd->cmnd[2] & (0x01 << 5)) {
+ scsicmd->result = DID_OK << 16
+ | COMMAND_COMPLETE << 8;
break;
+ } else {
+ scsicmd->result = DID_ERROR << 16
+ | COMMAND_COMPLETE << 8;
+ break;
+ }
} else {
scsicmd->result = DID_ERROR << 16
- | COMMAND_COMPLETE << 8;
+ | COMMAND_COMPLETE << 8;
break;
}
- } else {
- scsicmd->result = DID_ERROR << 16
- | COMMAND_COMPLETE << 8;
- break;
}
- }
- if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
- int len;
- scsicmd->result |= SAM_STAT_CHECK_CONDITION;
- len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
- SCSI_SENSE_BUFFERSIZE);
+ if (le32_to_cpu(srbreply->scsi_status)
+ == SAM_STAT_CHECK_CONDITION) {
+ int len;
+
+ scsicmd->result |= SAM_STAT_CHECK_CONDITION;
+ len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+ SCSI_SENSE_BUFFERSIZE);
#ifdef AAC_DETAILED_STATUS_INFO
- printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
- le32_to_cpu(srbreply->status), len);
+ printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
+ le32_to_cpu(srbreply->status), len);
#endif
- memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
+ memcpy(scsicmd->sense_buffer,
+ srbreply->sense_data, len);
+ }
}
/*
* OR in the scsi status (already shifted up a bit)
* D E F I N E S
*----------------------------------------------------------------------------*/
-#define AAC_MAX_MSIX 8 /* vectors */
+#define AAC_MAX_MSIX 32 /* vectors */
#define AAC_PCI_MSI_ENABLE 0x8000
enum {
#define PMC_GLOBAL_INT_BIT0 0x00000001
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 40709
+# define AAC_DRIVER_BUILD 41010
# define AAC_DRIVER_BRANCH "-ms"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
int (*adapter_restart)(struct aac_dev *dev, int bled);
+ void (*adapter_start)(struct aac_dev *dev);
/* Transport operations */
int (*adapter_ioremap)(struct aac_dev * dev, u32 size);
irq_handler_t adapter_intr;
&((AEP)->regs.src.bar0->CSR))
#define src_writel(AEP, CSR, value) writel(value, \
&((AEP)->regs.src.bar0->CSR))
+#if defined(writeq)
+#define src_writeq(AEP, CSR, value) writeq(value, \
+ &((AEP)->regs.src.bar0->CSR))
+#endif
#define SRC_ODR_SHIFT 12
#define SRC_IDR_SHIFT 9
struct fsa_dev_info *fsa_dev;
struct task_struct *thread;
int cardtype;
+ /*
+ *This lock will protect the two 32-bit
+ *writes to the Inbound Queue
+ */
+ spinlock_t iq_lock;
/*
* The following is the device specific extension.
#define aac_adapter_restart(dev,bled) \
(dev)->a_ops.adapter_restart(dev,bled)
+#define aac_adapter_start(dev) \
+ ((dev)->a_ops.adapter_start(dev))
+
#define aac_adapter_ioremap(dev, size) \
(dev)->a_ops.adapter_ioremap(dev, size)
#define AAC_OWNER_ERROR_HANDLER 0x103
#define AAC_OWNER_FIRMWARE 0x106
+int aac_acquire_irq(struct aac_dev *dev);
+void aac_free_irq(struct aac_dev *dev);
const char *aac_driverinfo(struct Scsi_Host *);
struct fib *aac_fib_alloc(struct aac_dev *dev);
int aac_fib_setup(struct aac_dev *dev);
int aac_src_init(struct aac_dev *dev);
int aac_srcv_init(struct aac_dev *dev);
int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
+void aac_define_int_mode(struct aac_dev *dev);
unsigned int aac_response_normal(struct aac_queue * q);
unsigned int aac_command_normal(struct aac_queue * q);
unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index,
#include "aacraid.h"
-static void aac_define_int_mode(struct aac_dev *dev);
-
struct aac_common aac_config = {
.irq_mod = 1
};
return 0;
}
+void aac_define_int_mode(struct aac_dev *dev)
+{
+ int i, msi_count, min_msix;
+
+ msi_count = i = 0;
+ /* max. vectors from GET_COMM_PREFERRED_SETTINGS */
+ if (dev->max_msix == 0 ||
+ dev->pdev->device == PMC_DEVICE_S6 ||
+ dev->sync_mode) {
+ dev->max_msix = 1;
+ dev->vector_cap =
+ dev->scsi_host_ptr->can_queue +
+ AAC_NUM_MGT_FIB;
+ return;
+ }
+
+ /* Don't bother allocating more MSI-X vectors than cpus */
+ msi_count = min(dev->max_msix,
+ (unsigned int)num_online_cpus());
+
+ dev->max_msix = msi_count;
+
+ if (msi_count > AAC_MAX_MSIX)
+ msi_count = AAC_MAX_MSIX;
+
+ for (i = 0; i < msi_count; i++)
+ dev->msixentry[i].entry = i;
+
+ if (msi_count > 1 &&
+ pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
+ min_msix = 2;
+ i = pci_enable_msix_range(dev->pdev,
+ dev->msixentry,
+ min_msix,
+ msi_count);
+ if (i > 0) {
+ dev->msi_enabled = 1;
+ msi_count = i;
+ } else {
+ dev->msi_enabled = 0;
+ printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+ dev->name, dev->id, i);
+ }
+ }
+
+ if (!dev->msi_enabled) {
+ msi_count = 1;
+ i = pci_enable_msi(dev->pdev);
+
+ if (!i) {
+ dev->msi_enabled = 1;
+ dev->msi = 1;
+ } else {
+ printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
+ dev->name, dev->id, i);
+ }
+ }
+
+ if (!dev->msi_enabled)
+ dev->max_msix = msi_count = 1;
+ else {
+ if (dev->max_msix > msi_count)
+ dev->max_msix = msi_count;
+ }
+ dev->vector_cap =
+ (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
+ msi_count;
+}
struct aac_dev *aac_init_adapter(struct aac_dev *dev)
{
u32 status[5];
dev->management_fib_count = 0;
spin_lock_init(&dev->manage_lock);
spin_lock_init(&dev->sync_lock);
+ spin_lock_init(&dev->iq_lock);
dev->max_fib_size = sizeof(struct hw_fib);
dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
- sizeof(struct aac_fibhdr)
return dev;
}
-static void aac_define_int_mode(struct aac_dev *dev)
-{
-
- int i, msi_count;
-
- msi_count = i = 0;
- /* max. vectors from GET_COMM_PREFERRED_SETTINGS */
- if (dev->max_msix == 0 ||
- dev->pdev->device == PMC_DEVICE_S6 ||
- dev->sync_mode) {
- dev->max_msix = 1;
- dev->vector_cap =
- dev->scsi_host_ptr->can_queue +
- AAC_NUM_MGT_FIB;
- return;
- }
-
- msi_count = min(dev->max_msix,
- (unsigned int)num_online_cpus());
-
- dev->max_msix = msi_count;
-
- if (msi_count > AAC_MAX_MSIX)
- msi_count = AAC_MAX_MSIX;
-
- for (i = 0; i < msi_count; i++)
- dev->msixentry[i].entry = i;
-
- if (msi_count > 1 &&
- pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
- i = pci_enable_msix(dev->pdev,
- dev->msixentry,
- msi_count);
- /* Check how many MSIX vectors are allocated */
- if (i >= 0) {
- dev->msi_enabled = 1;
- if (i) {
- msi_count = i;
- if (pci_enable_msix(dev->pdev,
- dev->msixentry,
- msi_count)) {
- dev->msi_enabled = 0;
- printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
- dev->name, dev->id, i);
- }
- }
- } else {
- dev->msi_enabled = 0;
- printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
- dev->name, dev->id, i);
- }
- }
-
- if (!dev->msi_enabled) {
- msi_count = 1;
- i = pci_enable_msi(dev->pdev);
-
- if (!i) {
- dev->msi_enabled = 1;
- dev->msi = 1;
- } else {
- printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
- dev->name, dev->id, i);
- }
- }
-
- if (!dev->msi_enabled)
- dev->max_msix = msi_count = 1;
- else {
- if (dev->max_msix > msi_count)
- dev->max_msix = msi_count;
- }
- dev->vector_cap =
- (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
- msi_count;
-}
static int _aac_reset_adapter(struct aac_dev *aac, int forced)
{
int index, quirks;
- int retval, i;
+ int retval;
struct Scsi_Host *host;
struct scsi_device *dev;
struct scsi_cmnd *command;
struct scsi_cmnd *command_list;
int jafo = 0;
- int cpu;
/*
* Assumptions:
aac->comm_phys = 0;
kfree(aac->queues);
aac->queues = NULL;
- cpu = cpumask_first(cpu_online_mask);
- if (aac->pdev->device == PMC_DEVICE_S6 ||
- aac->pdev->device == PMC_DEVICE_S7 ||
- aac->pdev->device == PMC_DEVICE_S8 ||
- aac->pdev->device == PMC_DEVICE_S9) {
- if (aac->max_msix > 1) {
- for (i = 0; i < aac->max_msix; i++) {
- if (irq_set_affinity_hint(
- aac->msixentry[i].vector,
- NULL)) {
- printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
- aac->name,
- aac->id,
- cpu);
- }
- cpu = cpumask_next(cpu,
- cpu_online_mask);
- free_irq(aac->msixentry[i].vector,
- &(aac->aac_msix[i]));
- }
- pci_disable_msix(aac->pdev);
- } else {
- free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
- }
- } else {
- free_irq(aac->pdev->irq, aac);
- }
- if (aac->msi)
- pci_disable_msi(aac->pdev);
+ aac_free_irq(aac);
kfree(aac->fsa_dev);
aac->fsa_dev = NULL;
quirks = aac_get_driver_ident(index)->quirks;
dev->aif_thread = 0;
return 0;
}
+
+int aac_acquire_irq(struct aac_dev *dev)
+{
+ int i;
+ int j;
+ int ret = 0;
+ int cpu;
+
+ cpu = cpumask_first(cpu_online_mask);
+ if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+ for (i = 0; i < dev->max_msix; i++) {
+ dev->aac_msix[i].vector_no = i;
+ dev->aac_msix[i].dev = dev;
+ if (request_irq(dev->msixentry[i].vector,
+ dev->a_ops.adapter_intr,
+ 0, "aacraid", &(dev->aac_msix[i]))) {
+ printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+ dev->name, dev->id, i);
+ for (j = 0 ; j < i ; j++)
+ free_irq(dev->msixentry[j].vector,
+ &(dev->aac_msix[j]));
+ pci_disable_msix(dev->pdev);
+ ret = -1;
+ }
+ if (irq_set_affinity_hint(dev->msixentry[i].vector,
+ get_cpu_mask(cpu))) {
+ printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
+ dev->name, dev->id, cpu);
+ }
+ cpu = cpumask_next(cpu, cpu_online_mask);
+ }
+ } else {
+ dev->aac_msix[0].vector_no = 0;
+ dev->aac_msix[0].dev = dev;
+
+ if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+ IRQF_SHARED, "aacraid",
+ &(dev->aac_msix[0])) < 0) {
+ if (dev->msi)
+ pci_disable_msi(dev->pdev);
+ printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+ dev->name, dev->id);
+ ret = -1;
+ }
+ }
+ return ret;
+}
+
+void aac_free_irq(struct aac_dev *dev)
+{
+ int i;
+ int cpu;
+
+ cpu = cpumask_first(cpu_online_mask);
+ if (dev->pdev->device == PMC_DEVICE_S6 ||
+ dev->pdev->device == PMC_DEVICE_S7 ||
+ dev->pdev->device == PMC_DEVICE_S8 ||
+ dev->pdev->device == PMC_DEVICE_S9) {
+ if (dev->max_msix > 1) {
+ for (i = 0; i < dev->max_msix; i++) {
+ if (irq_set_affinity_hint(
+ dev->msixentry[i].vector, NULL)) {
+ printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
+ dev->name, dev->id, cpu);
+ }
+ cpu = cpumask_next(cpu, cpu_online_mask);
+ free_irq(dev->msixentry[i].vector,
+ &(dev->aac_msix[i]));
+ }
+ } else {
+ free_irq(dev->pdev->irq, &(dev->aac_msix[0]));
+ }
+ } else {
+ free_irq(dev->pdev->irq, dev);
+ }
+ if (dev->msi)
+ pci_disable_msi(dev->pdev);
+ else if (dev->max_msix > 1)
+ pci_disable_msix(dev->pdev);
+}
return error;
}
+#if (defined(CONFIG_PM))
+void aac_release_resources(struct aac_dev *aac)
+{
+ int i;
+
+ aac_adapter_disable_int(aac);
+ if (aac->pdev->device == PMC_DEVICE_S6 ||
+ aac->pdev->device == PMC_DEVICE_S7 ||
+ aac->pdev->device == PMC_DEVICE_S8 ||
+ aac->pdev->device == PMC_DEVICE_S9) {
+ if (aac->max_msix > 1) {
+ for (i = 0; i < aac->max_msix; i++)
+ free_irq(aac->msixentry[i].vector,
+ &(aac->aac_msix[i]));
+ } else {
+ free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
+ }
+ } else {
+ free_irq(aac->pdev->irq, aac);
+ }
+ if (aac->msi)
+ pci_disable_msi(aac->pdev);
+ else if (aac->max_msix > 1)
+ pci_disable_msix(aac->pdev);
+
+}
+
+static int aac_acquire_resources(struct aac_dev *dev)
+{
+ int i, j;
+ int instance = dev->id;
+ const char *name = dev->name;
+ unsigned long status;
+ /*
+ * First clear out all interrupts. Then enable the one's that we
+ * can handle.
+ */
+ while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)
+ || status == 0xffffffff)
+ msleep(20);
+
+ aac_adapter_disable_int(dev);
+ aac_adapter_enable_int(dev);
+
+
+ if ((dev->pdev->device == PMC_DEVICE_S7 ||
+ dev->pdev->device == PMC_DEVICE_S8 ||
+ dev->pdev->device == PMC_DEVICE_S9))
+ aac_define_int_mode(dev);
+
+ if (dev->msi_enabled)
+ aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
+
+ if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+ for (i = 0; i < dev->max_msix; i++) {
+ dev->aac_msix[i].vector_no = i;
+ dev->aac_msix[i].dev = dev;
+
+ if (request_irq(dev->msixentry[i].vector,
+ dev->a_ops.adapter_intr,
+ 0, "aacraid", &(dev->aac_msix[i]))) {
+ printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+ name, instance, i);
+ for (j = 0 ; j < i ; j++)
+ free_irq(dev->msixentry[j].vector,
+ &(dev->aac_msix[j]));
+ pci_disable_msix(dev->pdev);
+ goto error_iounmap;
+ }
+ }
+ } else {
+ dev->aac_msix[0].vector_no = 0;
+ dev->aac_msix[0].dev = dev;
+
+ if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+ IRQF_SHARED, "aacraid",
+ &(dev->aac_msix[0])) < 0) {
+ if (dev->msi)
+ pci_disable_msi(dev->pdev);
+ printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+ name, instance);
+ goto error_iounmap;
+ }
+ }
+
+ aac_adapter_enable_int(dev);
+
+ if (!dev->sync_mode)
+ aac_adapter_start(dev);
+ return 0;
+
+error_iounmap:
+ return -1;
+
+}
+static int aac_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+ scsi_block_requests(shost);
+ aac_send_shutdown(aac);
+
+ aac_release_resources(aac);
+
+ pci_set_drvdata(pdev, shost);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int aac_resume(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+ int r;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+ r = pci_enable_device(pdev);
+
+ if (r)
+ goto fail_device;
+
+ pci_set_master(pdev);
+ if (aac_acquire_resources(aac))
+ goto fail_device;
+ /*
+ * reset this flag to unblock ioctl() as it was set at
+ * aac_send_shutdown() to block ioctls from upperlayer
+ */
+ aac->adapter_shutdown = 0;
+ scsi_unblock_requests(shost);
+
+ return 0;
+
+fail_device:
+ printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id);
+ scsi_host_put(shost);
+ pci_disable_device(pdev);
+ return -ENODEV;
+}
+#endif
+
static void aac_shutdown(struct pci_dev *dev)
{
struct Scsi_Host *shost = pci_get_drvdata(dev);
.id_table = aac_pci_tbl,
.probe = aac_probe_one,
.remove = aac_remove_one,
+#if (defined(CONFIG_PM))
+ .suspend = aac_suspend,
+ .resume = aac_resume,
+#endif
.shutdown = aac_shutdown,
};
dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
dev->a_ops.adapter_check_health = aac_rx_check_health;
dev->a_ops.adapter_restart = aac_rx_restart_adapter;
+ dev->a_ops.adapter_start = aac_rx_start_adapter;
/*
* First clear out all interrupts. Then enable the one's that we
dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
dev->a_ops.adapter_check_health = aac_sa_check_health;
dev->a_ops.adapter_restart = aac_sa_restart_adapter;
+ dev->a_ops.adapter_start = aac_sa_start_adapter;
dev->a_ops.adapter_intr = aac_sa_intr;
dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
dev->a_ops.adapter_ioremap = aac_sa_ioremap;
u32 fibsize;
dma_addr_t address;
struct aac_fib_xporthdr *pFibX;
+#if !defined(writeq)
+ unsigned long flags;
+#endif
+
u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
atomic_inc(&q->numpending);
return -EINVAL;
address |= fibsize;
}
-
+#if defined(writeq)
+ src_writeq(dev, MUnit.IQ_L, (u64)address);
+#else
+ spin_lock_irqsave(&fib->dev->iq_lock, flags);
src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
-
+ spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
+#endif
return 0;
}
dev->a_ops.adapter_sync_cmd = src_sync_cmd;
dev->a_ops.adapter_check_health = aac_src_check_health;
dev->a_ops.adapter_restart = aac_src_restart_adapter;
+ dev->a_ops.adapter_start = aac_src_start_adapter;
/*
* First clear out all interrupts. Then enable the one's that we
if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
goto error_iounmap;
- dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+ dev->msi = !pci_enable_msi(dev->pdev);
dev->aac_msix[0].vector_no = 0;
dev->aac_msix[0].dev = dev;
unsigned long status;
int restart = 0;
int instance = dev->id;
- int i, j;
const char *name = dev->name;
- int cpu;
dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
dev->a_ops.adapter_comm = aac_src_select_comm;
dev->a_ops.adapter_sync_cmd = src_sync_cmd;
dev->a_ops.adapter_check_health = aac_src_check_health;
dev->a_ops.adapter_restart = aac_src_restart_adapter;
+ dev->a_ops.adapter_start = aac_src_start_adapter;
/*
* First clear out all interrupts. Then enable the one's that we
goto error_iounmap;
if (dev->msi_enabled)
aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
- if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
- cpu = cpumask_first(cpu_online_mask);
- for (i = 0; i < dev->max_msix; i++) {
- dev->aac_msix[i].vector_no = i;
- dev->aac_msix[i].dev = dev;
-
- if (request_irq(dev->msixentry[i].vector,
- dev->a_ops.adapter_intr,
- 0,
- "aacraid",
- &(dev->aac_msix[i]))) {
- printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
- name, instance, i);
- for (j = 0 ; j < i ; j++)
- free_irq(dev->msixentry[j].vector,
- &(dev->aac_msix[j]));
- pci_disable_msix(dev->pdev);
- goto error_iounmap;
- }
- if (irq_set_affinity_hint(
- dev->msixentry[i].vector,
- get_cpu_mask(cpu))) {
- printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
- name, instance, cpu);
- }
- cpu = cpumask_next(cpu, cpu_online_mask);
- }
- } else {
- dev->aac_msix[0].vector_no = 0;
- dev->aac_msix[0].dev = dev;
-
- if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
- IRQF_SHARED,
- "aacraid",
- &(dev->aac_msix[0])) < 0) {
- if (dev->msi)
- pci_disable_msi(dev->pdev);
- printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
- name, instance);
- goto error_iounmap;
- }
- }
+
+ if (aac_acquire_irq(dev))
+ goto error_iounmap;
+
dev->dbg_base = dev->base_start;
dev->dbg_base_mapped = dev->base;
dev->dbg_size = dev->base_size;
* by enabling clustering, I/O throughput increases as well.
*/
.use_clustering = ENABLE_CLUSTERING,
- .use_blk_tags = 1,
};
static int advansys_wide_init_chip(struct Scsi_Host *shost)
/* Set maximum number of queues the adapter can handle. */
shost->can_queue = adv_dvc_varp->max_host_qng;
}
- ret = scsi_init_shared_tag_map(shost, shost->can_queue);
- if (ret) {
- shost_printk(KERN_ERR, shost, "init tag map failed\n");
- goto err_free_dma;
- }
/*
* Set the maximum number of scatter-gather elements the
.slave_configure = ahd_linux_slave_configure,
.target_alloc = ahd_linux_target_alloc,
.target_destroy = ahd_linux_target_destroy,
- .use_blk_tags = 1,
};
/******************************** Bus DMA *************************************/
.slave_configure = ahc_linux_slave_configure,
.target_alloc = ahc_linux_target_alloc,
.target_destroy = ahc_linux_target_destroy,
- .use_blk_tags = 1,
};
/**************************** Tasklet Handler *********************************/
.eh_bus_reset_handler = sas_eh_bus_reset_handler,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
{
int err;
+ scsi_remove_host(asd_ha->sas_ha.core.shost);
err = sas_unregister_ha(&asd_ha->sas_ha);
sas_remove_host(asd_ha->sas_ha.core.shost);
- scsi_remove_host(asd_ha->sas_ha.core.shost);
scsi_host_put(asd_ha->sas_ha.core.shost);
kfree(asd_ha->sas_ha.sas_phy);
* alloc_wrb_handle - To allocate a wrb handle
* @phba: The hba pointer
* @cid: The cid to use for allocation
+ * @pwrb_context: ptr to ptr to wrb context
*
* This happens under session_lock until submission to chip
*/
-struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid)
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
+ struct hwi_wrb_context **pcontext)
{
struct hwi_wrb_context *pwrb_context;
struct hwi_controller *phwi_ctrlr;
- struct wrb_handle *pwrb_handle, *pwrb_handle_tmp;
+ struct wrb_handle *pwrb_handle;
uint16_t cri_index = BE_GET_CRI_FROM_CID(cid);
phwi_ctrlr = phba->phwi_ctrlr;
pwrb_context->alloc_index = 0;
else
pwrb_context->alloc_index++;
- pwrb_handle_tmp = pwrb_context->pwrb_handle_base[
- pwrb_context->alloc_index];
- pwrb_handle->nxt_wrb_index = pwrb_handle_tmp->wrb_index;
+
+ /* Return the context address */
+ *pcontext = pwrb_context;
} else
pwrb_handle = NULL;
return pwrb_handle;
{
WARN_ON(!virtual_address);
WARN_ON(!physical_address);
- WARN_ON(!length > 0);
+ WARN_ON(!length);
WARN_ON(!sgl);
sgl->va = virtual_address;
struct beiscsi_offload_params *params)
{
struct wrb_handle *pwrb_handle;
+ struct hwi_wrb_context *pwrb_context = NULL;
struct beiscsi_hba *phba = beiscsi_conn->phba;
struct iscsi_task *task = beiscsi_conn->task;
struct iscsi_session *session = task->conn->session;
beiscsi_cleanup_task(task);
spin_unlock_bh(&session->back_lock);
- pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid);
+ pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid,
+ &pwrb_context);
/* Check for the adapter family */
if (is_chip_be2_be3r(phba))
beiscsi_offload_cxn_v0(params, pwrb_handle,
- phba->init_mem);
+ phba->init_mem,
+ pwrb_context);
else
- beiscsi_offload_cxn_v2(params, pwrb_handle);
+ beiscsi_offload_cxn_v2(params, pwrb_handle,
+ pwrb_context);
be_dws_le_to_cpu(pwrb_handle->pwrb,
sizeof(struct iscsi_target_context_update_wrb));
goto free_hndls;
}
io_task->pwrb_handle = alloc_wrb_handle(phba,
- beiscsi_conn->beiscsi_conn_cid);
+ beiscsi_conn->beiscsi_conn_cid,
+ &io_task->pwrb_context);
if (!io_task->pwrb_handle) {
beiscsi_log(phba, KERN_ERR,
BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
io_task->psgl_handle;
io_task->pwrb_handle =
alloc_wrb_handle(phba,
- beiscsi_conn->beiscsi_conn_cid);
+ beiscsi_conn->beiscsi_conn_cid,
+ &io_task->pwrb_context);
if (!io_task->pwrb_handle) {
beiscsi_log(phba, KERN_ERR,
BEISCSI_LOG_IO |
}
io_task->pwrb_handle =
alloc_wrb_handle(phba,
- beiscsi_conn->beiscsi_conn_cid);
+ beiscsi_conn->beiscsi_conn_cid,
+ &io_task->pwrb_context);
if (!io_task->pwrb_handle) {
beiscsi_log(phba, KERN_ERR,
BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
hwi_write_sgl_v2(pwrb, sg, num_sg, io_task);
AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb, pwrb,
- io_task->pwrb_handle->nxt_wrb_index);
+ io_task->pwrb_handle->wrb_index);
+ if (io_task->pwrb_context->plast_wrb)
+ AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb,
+ io_task->pwrb_context->plast_wrb,
+ io_task->pwrb_handle->wrb_index);
+ io_task->pwrb_context->plast_wrb = pwrb;
be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
hwi_write_sgl(pwrb, sg, num_sg, io_task);
AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
- io_task->pwrb_handle->nxt_wrb_index);
+ io_task->pwrb_handle->wrb_index);
+ if (io_task->pwrb_context->plast_wrb)
+ AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb,
+ io_task->pwrb_context->plast_wrb,
+ io_task->pwrb_handle->wrb_index);
+ io_task->pwrb_context->plast_wrb = pwrb;
+
be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb,
task->data_count);
AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
- io_task->pwrb_handle->nxt_wrb_index);
+ io_task->pwrb_handle->wrb_index);
+ if (io_task->pwrb_context->plast_wrb)
+ AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb,
+ io_task->pwrb_context->plast_wrb,
+ io_task->pwrb_handle->wrb_index);
+ io_task->pwrb_context->plast_wrb = pwrb;
+
pwrb_typeoffset = BE_WRB_TYPE_OFFSET;
} else {
AMAP_SET_BITS(struct amap_iscsi_wrb_v2, cmdsn_itt, pwrb,
AMAP_SET_BITS(struct amap_iscsi_wrb_v2, r2t_exp_dtl, pwrb,
task->data_count);
AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb, pwrb,
- io_task->pwrb_handle->nxt_wrb_index);
+ io_task->pwrb_handle->wrb_index);
+ if (io_task->pwrb_context->plast_wrb)
+ AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb,
+ io_task->pwrb_context->plast_wrb,
+ io_task->pwrb_handle->wrb_index);
+ io_task->pwrb_context->plast_wrb = pwrb;
+
pwrb_typeoffset = SKH_WRB_TYPE_OFFSET;
}
#include <scsi/scsi_transport_iscsi.h>
#define DRV_NAME "be2iscsi"
-#define BUILD_STR "10.6.0.0"
+#define BUILD_STR "10.6.0.1"
#define BE_NAME "Emulex OneConnect" \
"Open-iSCSI Driver version" BUILD_STR
#define DRV_DESC BE_NAME " " "Driver"
struct sgl_handle *psgl_handle;
struct beiscsi_conn *conn;
struct scsi_cmnd *scsi_cmnd;
+ struct hwi_wrb_context *pwrb_context;
unsigned int cmd_sn;
unsigned int flags;
unsigned short cid;
} __packed;
-struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid);
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
+ struct hwi_wrb_context **pcontext);
void
free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle);
struct wrb_handle {
enum hwh_type_enum type;
unsigned short wrb_index;
- unsigned short nxt_wrb_index;
struct iscsi_task *pio_handle;
struct iscsi_wrb *pwrb;
void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params,
struct wrb_handle *pwrb_handle,
- struct be_mem_descriptor *mem_descr)
+ struct be_mem_descriptor *mem_descr,
+ struct hwi_wrb_context *pwrb_context)
{
struct iscsi_wrb *pwrb = pwrb_handle->pwrb;
max_burst_length) / 32]);
AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ptr2nextwrb,
- pwrb, pwrb_handle->nxt_wrb_index);
+ pwrb, pwrb_handle->wrb_index);
+ if (pwrb_context->plast_wrb)
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+ ptr2nextwrb,
+ pwrb_context->plast_wrb,
+ pwrb_handle->wrb_index);
+ pwrb_context->plast_wrb = pwrb;
+
AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
session_state, pwrb, 0);
AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, compltonack,
}
void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params,
- struct wrb_handle *pwrb_handle)
+ struct wrb_handle *pwrb_handle,
+ struct hwi_wrb_context *pwrb_context)
{
struct iscsi_wrb *pwrb = pwrb_handle->pwrb;
BE_TGT_CTX_UPDT_CMD);
AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
ptr2nextwrb,
- pwrb, pwrb_handle->nxt_wrb_index);
+ pwrb, pwrb_handle->wrb_index);
+ if (pwrb_context->plast_wrb)
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+ ptr2nextwrb,
+ pwrb_context->plast_wrb,
+ pwrb_handle->wrb_index);
+ pwrb_context->plast_wrb = pwrb;
+
AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, wrb_idx,
pwrb, pwrb_handle->wrb_index);
AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params,
struct wrb_handle *pwrb_handle,
- struct be_mem_descriptor *mem_descr);
+ struct be_mem_descriptor *mem_descr,
+ struct hwi_wrb_context *pwrb_context);
void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params,
- struct wrb_handle *pwrb_handle);
+ struct wrb_handle *pwrb_handle,
+ struct hwi_wrb_context *pwrb_context);
+
void beiscsi_ue_detect(struct beiscsi_hba *phba);
int be_cmd_modify_eq_delay(struct beiscsi_hba *phba,
struct be_set_eqd *, int num);
.shost_attrs = bfad_im_host_attrs,
.max_sectors = BFAD_MAX_SECTORS,
.vendor_id = BFA_PCI_VENDOR_ID_BROCADE,
- .use_blk_tags = 1,
};
struct scsi_host_template bfad_im_vport_template = {
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = bfad_im_vport_attrs,
.max_sectors = BFAD_MAX_SECTORS,
- .use_blk_tags = 1,
};
bfa_status_t
-/* 57xx_hsi_bnx2fc.h: QLogic NetXtreme II Linux FCoE offload driver.
+/* 57xx_hsi_bnx2fc.h: QLogic Linux FCoE offload driver.
* Handles operations such as session offload/upload etc, and manages
* session resources such as connection id and qp resources.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
config SCSI_BNX2X_FCOE
- tristate "QLogic NetXtreme II FCoE support"
+ tristate "QLogic FCoE offload support"
depends on PCI
depends on (IPV6 || IPV6=n)
depends on LIBFC
select NET_VENDOR_BROADCOM
select CNIC
---help---
- This driver supports FCoE offload for the QLogic NetXtreme II
- devices.
+ This driver supports FCoE offload for the QLogic devices.
-/* bnx2fc.h: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc.h: QLogic Linux FCoE offload driver.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc"
-#define BNX2FC_VERSION "2.4.2"
+#define BNX2FC_VERSION "2.9.6"
#define PFX "bnx2fc: "
#define BNX2FC_FLAG_OFLD_REQ_CMPL 0x5
#define BNX2FC_FLAG_CTX_ALLOC_FAILURE 0x6
#define BNX2FC_FLAG_UPLD_REQ_COMPL 0x7
-#define BNX2FC_FLAG_EXPL_LOGO 0x8
#define BNX2FC_FLAG_DISABLE_FAILED 0x9
#define BNX2FC_FLAG_ENABLED 0xa
-/* bnx2fc_constants.h: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_constants.h: QLogic Linux FCoE offload driver.
* Handles operations such as session offload/upload etc, and manages
* session resources such as connection id and qp resources.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
-/* bnx2fc_debug.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_debug.c: QLogic Linux FCoE offload driver.
* Handles operations such as session offload/upload etc, and manages
* session resources such as connection id and qp resources.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
-/* bnx2fc_debug.h: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_debug.h: QLogic Linux FCoE offload driver.
* Handles operations such as session offload/upload etc, and manages
* session resources such as connection id and qp resources.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
- * bnx2fc_els.c: QLogic NetXtreme II Linux FCoE offload driver.
+ * bnx2fc_els.c: QLogic Linux FCoE offload driver.
* This file contains helper routines that handle ELS requests
* and responses.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
rc = -EINVAL;
goto els_err;
}
- if (!(test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags)) ||
- (test_bit(BNX2FC_FLAG_EXPL_LOGO, &tgt->flags))) {
+ if (!(test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags))) {
printk(KERN_ERR PFX "els 0x%x: tgt not ready\n", op);
rc = -EINVAL;
goto els_err;
els_req->cb_func = cb_func;
cb_arg->io_req = els_req;
els_req->cb_arg = cb_arg;
+ els_req->data_xfer_len = data_len;
mp_req = (struct bnx2fc_mp_req *)&(els_req->mp_req);
rc = bnx2fc_init_mp_req(els_req);
-/* bnx2fc_fcoe.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_fcoe.c: QLogic Linux FCoE offload driver.
* This file contains the code that interacts with libfc, libfcoe,
* cnic modules to create FCoE instances, send/receive non-offloaded
* FIP/FCoE packets, listen to link events etc.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define DRV_MODULE_NAME "bnx2fc"
#define DRV_MODULE_VERSION BNX2FC_VERSION
-#define DRV_MODULE_RELDATE "Dec 11, 2013"
+#define DRV_MODULE_RELDATE "October 15, 2015"
static char version[] =
- "QLogic NetXtreme II FCoE Driver " DRV_MODULE_NAME \
+ "QLogic FCoE Driver " DRV_MODULE_NAME \
" v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("Bhanu Prakash Gollapudi <bprakash@broadcom.com>");
-MODULE_DESCRIPTION("QLogic NetXtreme II BCM57710 FCoE Driver");
+MODULE_DESCRIPTION("QLogic FCoE Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
{
struct bnx2fc_interface *interface = fcoe_ctlr_priv(ctlr);
struct bnx2fc_hba *hba;
- struct cnic_fc_npiv_tbl npiv_tbl;
+ struct cnic_fc_npiv_tbl *npiv_tbl;
struct fc_lport *lport;
if (interface->enabled == false) {
if (!hba->cnic->get_fc_npiv_tbl)
goto done;
- memset(&npiv_tbl, 0, sizeof(npiv_tbl));
- if (hba->cnic->get_fc_npiv_tbl(hba->cnic, &npiv_tbl))
+ npiv_tbl = kzalloc(sizeof(struct cnic_fc_npiv_tbl), GFP_KERNEL);
+ if (!npiv_tbl)
goto done;
- bnx2fc_npiv_create_vports(lport, &npiv_tbl);
+ if (hba->cnic->get_fc_npiv_tbl(hba->cnic, npiv_tbl))
+ goto done_free;
+
+ bnx2fc_npiv_create_vports(lport, npiv_tbl);
+done_free:
+ kfree(npiv_tbl);
done:
return 0;
}
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = BNX2FC_MAX_BDS_PER_CMD,
.max_sectors = 1024,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
-/* bnx2fc_hwi.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_hwi.c: QLogic Linux FCoE offload driver.
* This file contains the code that low level functions that interact
* with 57712 FCoE firmware.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
-/* bnx2fc_io.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_io.c: QLogic Linux FCoE offload driver.
* IO manager and SCSI IO processing.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
{
struct bnx2fc_cmd *io_req = container_of(work, struct bnx2fc_cmd,
timeout_work.work);
- struct fc_lport *lport;
- struct fc_rport_priv *rdata;
u8 cmd_type = io_req->cmd_type;
struct bnx2fc_rport *tgt = io_req->tgt;
- int logo_issued;
int rc;
BNX2FC_IO_DBG(io_req, "cmd_timeout, cmd_type = %d,"
io_req->refcount.refcount.counter);
if (!(test_and_set_bit(BNX2FC_FLAG_ABTS_DONE,
&io_req->req_flags))) {
-
- lport = io_req->port->lport;
- rdata = io_req->tgt->rdata;
- logo_issued = test_and_set_bit(
- BNX2FC_FLAG_EXPL_LOGO,
- &tgt->flags);
+ /*
+ * Cleanup and return original command to
+ * mid-layer.
+ */
+ bnx2fc_initiate_cleanup(io_req);
kref_put(&io_req->refcount, bnx2fc_cmd_release);
spin_unlock_bh(&tgt->tgt_lock);
- /* Explicitly logo the target */
- if (!logo_issued) {
- BNX2FC_IO_DBG(io_req, "Explicit "
- "logo - tgt flags = 0x%lx\n",
- tgt->flags);
-
- mutex_lock(&lport->disc.disc_mutex);
- lport->tt.rport_logoff(rdata);
- mutex_unlock(&lport->disc.disc_mutex);
- }
return;
}
} else {
rc = bnx2fc_initiate_abts(io_req);
if (rc == SUCCESS)
goto done;
- /*
- * Explicitly logo the target if
- * abts initiation fails
- */
- lport = io_req->port->lport;
- rdata = io_req->tgt->rdata;
- logo_issued = test_and_set_bit(
- BNX2FC_FLAG_EXPL_LOGO,
- &tgt->flags);
+
kref_put(&io_req->refcount, bnx2fc_cmd_release);
spin_unlock_bh(&tgt->tgt_lock);
- if (!logo_issued) {
- BNX2FC_IO_DBG(io_req, "Explicit "
- "logo - tgt flags = 0x%lx\n",
- tgt->flags);
-
-
- mutex_lock(&lport->disc.disc_mutex);
- lport->tt.rport_logoff(rdata);
- mutex_unlock(&lport->disc.disc_mutex);
- }
return;
} else {
BNX2FC_IO_DBG(io_req, "IO already in "
if (!test_and_set_bit(BNX2FC_FLAG_ABTS_DONE,
&io_req->req_flags)) {
- lport = io_req->port->lport;
- rdata = io_req->tgt->rdata;
- logo_issued = test_and_set_bit(
- BNX2FC_FLAG_EXPL_LOGO,
- &tgt->flags);
kref_put(&io_req->refcount, bnx2fc_cmd_release);
spin_unlock_bh(&tgt->tgt_lock);
- /* Explicitly logo the target */
- if (!logo_issued) {
- BNX2FC_IO_DBG(io_req, "Explicitly logo"
- "(els)\n");
- mutex_lock(&lport->disc.disc_mutex);
- lport->tt.rport_logoff(rdata);
- mutex_unlock(&lport->disc.disc_mutex);
- }
return;
}
} else {
mp_req = (struct bnx2fc_mp_req *)&(io_req->mp_req);
memset(mp_req, 0, sizeof(struct bnx2fc_mp_req));
- mp_req->req_len = sizeof(struct fcp_cmnd);
- io_req->data_xfer_len = mp_req->req_len;
+ if (io_req->cmd_type != BNX2FC_ELS) {
+ mp_req->req_len = sizeof(struct fcp_cmnd);
+ io_req->data_xfer_len = mp_req->req_len;
+ } else
+ mp_req->req_len = io_req->data_xfer_len;
+
mp_req->req_buf = dma_alloc_coherent(&hba->pcidev->dev, CNIC_PAGE_SIZE,
&mp_req->req_buf_dma,
GFP_ATOMIC);
return bnx2fc_initiate_tmf(sc_cmd, FCP_TMF_LUN_RESET);
}
-int bnx2fc_expl_logo(struct fc_lport *lport, struct bnx2fc_cmd *io_req)
+int bnx2fc_abts_cleanup(struct bnx2fc_cmd *io_req)
{
struct bnx2fc_rport *tgt = io_req->tgt;
- struct fc_rport_priv *rdata = tgt->rdata;
- int logo_issued;
int rc = SUCCESS;
- int wait_cnt = 0;
- BNX2FC_IO_DBG(io_req, "Expl logo - tgt flags = 0x%lx\n",
- tgt->flags);
- logo_issued = test_and_set_bit(BNX2FC_FLAG_EXPL_LOGO,
- &tgt->flags);
io_req->wait_for_comp = 1;
bnx2fc_initiate_cleanup(io_req);
* release the reference taken in eh_abort to allow the
* target to re-login after flushing IOs
*/
- kref_put(&io_req->refcount, bnx2fc_cmd_release);
-
- if (!logo_issued) {
- clear_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags);
- mutex_lock(&lport->disc.disc_mutex);
- lport->tt.rport_logoff(rdata);
- mutex_unlock(&lport->disc.disc_mutex);
- do {
- msleep(BNX2FC_RELOGIN_WAIT_TIME);
- if (wait_cnt++ > BNX2FC_RELOGIN_WAIT_CNT) {
- rc = FAILED;
- break;
- }
- } while (!test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags));
- }
+ kref_put(&io_req->refcount, bnx2fc_cmd_release);
+
spin_lock_bh(&tgt->tgt_lock);
return rc;
}
if (cancel_delayed_work(&io_req->timeout_work))
kref_put(&io_req->refcount,
bnx2fc_cmd_release); /* drop timer hold */
- rc = bnx2fc_expl_logo(lport, io_req);
+ rc = bnx2fc_abts_cleanup(io_req);
/* This only occurs when an task abort was requested while ABTS
is in progress. Setting the IO_CLEANUP flag will skip the
RRQ process in the case when the fw generated SCSI_CMD cmpl
/* Let the scsi-ml try to recover this command */
printk(KERN_ERR PFX "abort failed, xid = 0x%x\n",
io_req->xid);
- rc = bnx2fc_expl_logo(lport, io_req);
+ rc = bnx2fc_abts_cleanup(io_req);
goto out;
} else {
/*
int fcp_rsp_len = 0;
io_req->fcp_status = FC_GOOD;
- io_req->fcp_resid = fcp_rsp->fcp_resid;
+ io_req->fcp_resid = 0;
+ if (rsp_flags & (FCOE_FCP_RSP_FLAGS_FCP_RESID_OVER |
+ FCOE_FCP_RSP_FLAGS_FCP_RESID_UNDER))
+ io_req->fcp_resid = fcp_rsp->fcp_resid;
io_req->scsi_comp_flags = rsp_flags;
CMD_SCSI_STATUS(sc_cmd) = io_req->cdb_status =
-/* bnx2fc_tgt.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_tgt.c: QLogic Linux FCoE offload driver.
* Handles operations such as session offload/upload etc, and manages
* session resources such as connection id and qp resources.
*
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
(hba->num_ofld_sess == 0)) {
wake_up_interruptible(&hba->shutdown_wait);
}
- if (test_bit(BNX2FC_FLAG_EXPL_LOGO, &tgt->flags)) {
- printk(KERN_ERR PFX "Relogin to the tgt\n");
- mutex_lock(&lport->disc.disc_mutex);
- lport->tt.rport_login(rdata);
- mutex_unlock(&lport->disc.disc_mutex);
- }
mutex_unlock(&hba->hba_mutex);
break;
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = csio_fcoe_lport_attrs,
.max_sectors = CSIO_MAX_SECTOR_SIZE,
- .use_blk_tags = 1,
};
struct scsi_host_template csio_fcoe_shost_vport_template = {
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = csio_fcoe_vport_attrs,
.max_sectors = CSIO_MAX_SECTOR_SIZE,
- .use_blk_tags = 1,
};
/*
.proc_name = ESAS2R_DRVR_NAME,
.change_queue_depth = scsi_change_queue_depth,
.max_sectors = 0xFFFF,
- .use_blk_tags = 1,
};
int sgl_page_size = 512;
.use_clustering = ENABLE_CLUSTERING,
.max_sectors = 0xffff,
.skip_settle_delay = 1,
- .use_blk_tags = 1,
};
EXPORT_SYMBOL(scsi_esp_template);
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = SG_ALL,
.max_sectors = 0xffff,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
set_user_nice(current, MIN_NICE);
-retry:
while (!kthread_should_stop()) {
spin_lock_bh(&p->fcoe_rx_list.lock);
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock_bh(&p->fcoe_rx_list.lock);
schedule();
- goto retry;
+ continue;
}
spin_unlock_bh(&p->fcoe_rx_list.lock);
.sg_tablesize = FNIC_MAX_SG_DESC_CNT,
.max_sectors = 0xffff,
.shost_attrs = fnic_attrs,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
}
fnic->fnic_max_tag_id = host->can_queue;
- err = scsi_init_shared_tag_map(host, fnic->fnic_max_tag_id);
- if (err) {
- shost_printk(KERN_ERR, fnic->lport->host,
- "Unable to alloc shared tag map\n");
- goto err_out_dev_close;
- }
-
host->max_lun = fnic->config.luns_per_tgt;
host->max_id = FNIC_MAX_FCP_TARGET;
host->max_cmd_len = FCOE_MAX_CMD_LEN;
error = scsi_mq_setup_tags(shost);
if (error)
goto fail;
+ } else {
+ shost->bqt = blk_init_tags(shost->can_queue,
+ shost->hostt->tag_alloc_policy);
+ if (!shost->bqt) {
+ error = -ENOMEM;
+ goto fail;
+ }
}
/*
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport_sas.h>
#include <scsi/scsi_dbg.h>
#include <linux/cciss_ioctl.h>
#include <linux/string.h>
#include "hpsa_cmd.h"
#include "hpsa.h"
-/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
-#define HPSA_DRIVER_VERSION "3.4.10-0"
+/*
+ * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.'
+ * with an optional trailing '-' followed by a byte value (0-255).
+ */
+#define HPSA_DRIVER_VERSION "3.4.14-0"
#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
#define HPSA "hpsa"
{0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
+static struct scsi_transport_template *hpsa_sas_transport_template;
+static int hpsa_add_sas_host(struct ctlr_info *h);
+static void hpsa_delete_sas_host(struct ctlr_info *h);
+static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
+ struct hpsa_scsi_dev_t *device);
+static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device);
+static struct hpsa_scsi_dev_t
+ *hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
+ struct sas_rphy *rphy);
+
#define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy)
static const struct scsi_cmnd hpsa_cmd_busy;
#define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle)
int cmd_type);
static void hpsa_free_cmd_pool(struct ctlr_info *h);
#define VPD_PAGE (1 << 8)
+#define HPSA_SIMPLE_ERROR_BITS 0x03
static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static void hpsa_scan_start(struct Scsi_Host *);
static int hpsa_slave_configure(struct scsi_device *sdev);
static void hpsa_slave_destroy(struct scsi_device *sdev);
-static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
+static void hpsa_update_scsi_devices(struct ctlr_info *h);
static int check_for_unit_attention(struct ctlr_info *h,
struct CommandList *c);
static void check_ioctl_unit_attention(struct ctlr_info *h,
static void hpsa_command_resubmit_worker(struct work_struct *work);
static u32 lockup_detected(struct ctlr_info *h);
static int detect_controller_lockup(struct ctlr_info *h);
-static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device);
+static void hpsa_disable_rld_caching(struct ctlr_info *h);
+static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
+ struct ReportExtendedLUNdata *buf, int bufsize);
+static int hpsa_luns_changed(struct ctlr_info *h);
static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
{
}
static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
- "1(+0)ADM", "UNKNOWN"
+ "1(+0)ADM", "UNKNOWN", "PHYS DRV"
};
#define HPSA_RAID_0 0
#define HPSA_RAID_4 1
#define HPSA_RAID_51 4
#define HPSA_RAID_6 5 /* also used for RAID 60 */
#define HPSA_RAID_ADM 6 /* also used for RAID 1+0 ADM */
-#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1)
+#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 2)
+#define PHYSICAL_DRIVE (ARRAY_SIZE(raid_label) - 1)
+
+static inline bool is_logical_device(struct hpsa_scsi_dev_t *device)
+{
+ return !device->physical_device;
+}
static ssize_t raid_level_show(struct device *dev,
struct device_attribute *attr, char *buf)
}
/* Is this even a logical drive? */
- if (!is_logical_dev_addr_mode(hdev->scsi3addr)) {
+ if (!is_logical_device(hdev)) {
spin_unlock_irqrestore(&h->lock, flags);
l = snprintf(buf, PAGE_SIZE, "N/A\n");
return l;
}
#define MAX_PATHS 8
-#define PATH_STRING_LEN 50
static ssize_t path_info_show(struct device *dev,
struct device_attribute *attr, char *buf)
u8 path_map_index = 0;
char *active;
unsigned char phys_connector[2];
- unsigned char path[MAX_PATHS][PATH_STRING_LEN];
- memset(path, 0, MAX_PATHS * PATH_STRING_LEN);
sdev = to_scsi_device(dev);
h = sdev_to_hba(sdev);
spin_lock_irqsave(&h->devlock, flags);
else
continue;
- output_len = snprintf(path[i],
- PATH_STRING_LEN, "[%d:%d:%d:%d] %20.20s ",
+ output_len += scnprintf(buf + output_len,
+ PAGE_SIZE - output_len,
+ "[%d:%d:%d:%d] %20.20s ",
h->scsi_host->host_no,
hdev->bus, hdev->target, hdev->lun,
scsi_device_type(hdev->devtype));
- if (is_ext_target(h, hdev) ||
- (hdev->devtype == TYPE_RAID) ||
- is_logical_dev_addr_mode(hdev->scsi3addr)) {
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN, "%s\n",
- active);
+ if (hdev->external ||
+ hdev->devtype == TYPE_RAID ||
+ is_logical_device(hdev)) {
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len,
+ "%s\n", active);
continue;
}
if (phys_connector[1] < '0')
phys_connector[1] = '0';
if (hdev->phys_connector[i] > 0)
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN,
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len,
"PORT: %.2s ",
phys_connector);
- if (hdev->devtype == TYPE_DISK &&
- hdev->expose_state != HPSA_DO_NOT_EXPOSE) {
+ if (hdev->devtype == TYPE_DISK && hdev->expose_device) {
if (box == 0 || box == 0xFF) {
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN,
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len,
"BAY: %hhu %s\n",
bay, active);
} else {
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN,
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len,
"BOX: %hhu BAY: %hhu %s\n",
box, bay, active);
}
} else if (box != 0 && box != 0xFF) {
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN, "BOX: %hhu %s\n",
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len, "BOX: %hhu %s\n",
box, active);
} else
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN, "%s\n", active);
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len, "%s\n", active);
}
spin_unlock_irqrestore(&h->devlock, flags);
- return snprintf(buf, output_len+1, "%s%s%s%s%s%s%s%s",
- path[0], path[1], path[2], path[3],
- path[4], path[5], path[6], path[7]);
+ return output_len;
}
static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
&dev_attr_unique_id,
&dev_attr_hp_ssd_smart_path_enabled,
&dev_attr_path_info,
- &dev_attr_lockup_detected,
NULL,
};
&dev_attr_resettable,
&dev_attr_hp_ssd_smart_path_status,
&dev_attr_raid_offload_debug,
+ &dev_attr_lockup_detected,
NULL,
};
return !found;
}
-static inline void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
+static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
struct hpsa_scsi_dev_t *dev, char *description)
{
+#define LABEL_SIZE 25
+ char label[LABEL_SIZE];
+
+ if (h == NULL || h->pdev == NULL || h->scsi_host == NULL)
+ return;
+
+ switch (dev->devtype) {
+ case TYPE_RAID:
+ snprintf(label, LABEL_SIZE, "controller");
+ break;
+ case TYPE_ENCLOSURE:
+ snprintf(label, LABEL_SIZE, "enclosure");
+ break;
+ case TYPE_DISK:
+ if (dev->external)
+ snprintf(label, LABEL_SIZE, "external");
+ else if (!is_logical_dev_addr_mode(dev->scsi3addr))
+ snprintf(label, LABEL_SIZE, "%s",
+ raid_label[PHYSICAL_DRIVE]);
+ else
+ snprintf(label, LABEL_SIZE, "RAID-%s",
+ dev->raid_level > RAID_UNKNOWN ? "?" :
+ raid_label[dev->raid_level]);
+ break;
+ case TYPE_ROM:
+ snprintf(label, LABEL_SIZE, "rom");
+ break;
+ case TYPE_TAPE:
+ snprintf(label, LABEL_SIZE, "tape");
+ break;
+ case TYPE_MEDIUM_CHANGER:
+ snprintf(label, LABEL_SIZE, "changer");
+ break;
+ default:
+ snprintf(label, LABEL_SIZE, "UNKNOWN");
+ break;
+ }
+
dev_printk(level, &h->pdev->dev,
- "scsi %d:%d:%d:%d: %s %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+ "scsi %d:%d:%d:%d: %s %s %.8s %.16s %s SSDSmartPathCap%c En%c Exp=%d\n",
h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
description,
scsi_device_type(dev->devtype),
dev->vendor,
dev->model,
- dev->raid_level > RAID_UNKNOWN ?
- "RAID-?" : raid_label[dev->raid_level],
+ label,
dev->offload_config ? '+' : '-',
dev->offload_enabled ? '+' : '-',
- dev->expose_state);
+ dev->expose_device);
}
/* Add an entry into h->dev[] array. */
-static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno,
+static int hpsa_scsi_add_entry(struct ctlr_info *h,
struct hpsa_scsi_dev_t *device,
struct hpsa_scsi_dev_t *added[], int *nadded)
{
added[*nadded] = device;
(*nadded)++;
hpsa_show_dev_msg(KERN_INFO, h, device,
- device->expose_state & HPSA_SCSI_ADD ? "added" : "masked");
+ device->expose_device ? "added" : "masked");
device->offload_to_be_enabled = device->offload_enabled;
device->offload_enabled = 0;
return 0;
}
/* Update an entry in h->dev[] array. */
-static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
+static void hpsa_scsi_update_entry(struct ctlr_info *h,
int entry, struct hpsa_scsi_dev_t *new_entry)
{
int offload_enabled;
}
/* Replace an entry from h->dev[] array. */
-static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
+static void hpsa_scsi_replace_entry(struct ctlr_info *h,
int entry, struct hpsa_scsi_dev_t *new_entry,
struct hpsa_scsi_dev_t *added[], int *nadded,
struct hpsa_scsi_dev_t *removed[], int *nremoved)
}
/* Remove an entry from h->dev[] array. */
-static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry,
+static void hpsa_scsi_remove_entry(struct ctlr_info *h, int entry,
struct hpsa_scsi_dev_t *removed[], int *nremoved)
{
/* assumes h->devlock is held */
#define DEVICE_CHANGED 1
#define DEVICE_SAME 2
#define DEVICE_UPDATED 3
+ if (needle == NULL)
+ return DEVICE_NOT_FOUND;
+
for (i = 0; i < haystack_size; i++) {
if (haystack[i] == NULL) /* previously removed. */
continue;
if (!logical_drive->offload_config)
continue;
for (j = 0; j < ndevices; j++) {
+ if (dev[j] == NULL)
+ continue;
if (dev[j]->devtype != TYPE_DISK)
continue;
- if (is_logical_dev_addr_mode(dev[j]->scsi3addr))
+ if (is_logical_device(dev[j]))
continue;
if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle)
continue;
int i;
for (i = 0; i < ndevices; i++) {
+ if (dev[i] == NULL)
+ continue;
if (dev[i]->devtype != TYPE_DISK)
continue;
- if (!is_logical_dev_addr_mode(dev[i]->scsi3addr))
+ if (!is_logical_device(dev[i]))
continue;
/*
}
}
-static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
+static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
+{
+ int rc = 0;
+
+ if (!h->scsi_host)
+ return 1;
+
+ if (is_logical_device(device)) /* RAID */
+ rc = scsi_add_device(h->scsi_host, device->bus,
+ device->target, device->lun);
+ else /* HBA */
+ rc = hpsa_add_sas_device(h->sas_host, device);
+
+ return rc;
+}
+
+static void hpsa_remove_device(struct ctlr_info *h,
+ struct hpsa_scsi_dev_t *device)
+{
+ struct scsi_device *sdev = NULL;
+
+ if (!h->scsi_host)
+ return;
+
+ if (is_logical_device(device)) { /* RAID */
+ sdev = scsi_device_lookup(h->scsi_host, device->bus,
+ device->target, device->lun);
+ if (sdev) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else {
+ /*
+ * We don't expect to get here. Future commands
+ * to this device will get a selection timeout as
+ * if the device were gone.
+ */
+ hpsa_show_dev_msg(KERN_WARNING, h, device,
+ "didn't find device for removal.");
+ }
+ } else /* HBA */
+ hpsa_remove_sas_device(device);
+}
+
+static void adjust_hpsa_scsi_table(struct ctlr_info *h,
struct hpsa_scsi_dev_t *sd[], int nsds)
{
/* sd contains scsi3 addresses and devtypes, and inquiry
unsigned long flags;
struct hpsa_scsi_dev_t **added, **removed;
int nadded, nremoved;
- struct Scsi_Host *sh = NULL;
+
+ /*
+ * A reset can cause a device status to change
+ * re-schedule the scan to see what happened.
+ */
+ if (h->reset_in_progress) {
+ h->drv_req_rescan = 1;
+ return;
+ }
added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL);
removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL);
device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry);
if (device_change == DEVICE_NOT_FOUND) {
changes++;
- hpsa_scsi_remove_entry(h, hostno, i,
- removed, &nremoved);
+ hpsa_scsi_remove_entry(h, i, removed, &nremoved);
continue; /* remove ^^^, hence i not incremented */
} else if (device_change == DEVICE_CHANGED) {
changes++;
- hpsa_scsi_replace_entry(h, hostno, i, sd[entry],
+ hpsa_scsi_replace_entry(h, i, sd[entry],
added, &nadded, removed, &nremoved);
/* Set it to NULL to prevent it from being freed
* at the bottom of hpsa_update_scsi_devices()
*/
sd[entry] = NULL;
} else if (device_change == DEVICE_UPDATED) {
- hpsa_scsi_update_entry(h, hostno, i, sd[entry]);
+ hpsa_scsi_update_entry(h, i, sd[entry]);
}
i++;
}
h->ndevices, &entry);
if (device_change == DEVICE_NOT_FOUND) {
changes++;
- if (hpsa_scsi_add_entry(h, hostno, sd[i],
- added, &nadded) != 0)
+ if (hpsa_scsi_add_entry(h, sd[i], added, &nadded) != 0)
break;
sd[i] = NULL; /* prevent from being freed later. */
} else if (device_change == DEVICE_CHANGED) {
/* Now that h->dev[]->phys_disk[] is coherent, we can enable
* any logical drives that need it enabled.
*/
- for (i = 0; i < h->ndevices; i++)
+ for (i = 0; i < h->ndevices; i++) {
+ if (h->dev[i] == NULL)
+ continue;
h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled;
+ }
spin_unlock_irqrestore(&h->devlock, flags);
* (or if there are no changes) scsi_scan_host will do it later the
* first time through.
*/
- if (hostno == -1 || !changes)
+ if (!changes)
goto free_and_out;
- sh = h->scsi_host;
/* Notify scsi mid layer of any removed devices */
for (i = 0; i < nremoved; i++) {
- if (removed[i]->expose_state & HPSA_SCSI_ADD) {
- struct scsi_device *sdev =
- scsi_device_lookup(sh, removed[i]->bus,
- removed[i]->target, removed[i]->lun);
- if (sdev != NULL) {
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
- } else {
- /*
- * We don't expect to get here.
- * future cmds to this device will get selection
- * timeout as if the device was gone.
- */
- hpsa_show_dev_msg(KERN_WARNING, h, removed[i],
- "didn't find device for removal.");
- }
- }
+ if (removed[i] == NULL)
+ continue;
+ if (removed[i]->expose_device)
+ hpsa_remove_device(h, removed[i]);
kfree(removed[i]);
removed[i] = NULL;
}
/* Notify scsi mid layer of any added devices */
for (i = 0; i < nadded; i++) {
- if (!(added[i]->expose_state & HPSA_SCSI_ADD))
+ int rc = 0;
+
+ if (added[i] == NULL)
+ continue;
+ if (!(added[i]->expose_device))
continue;
- if (scsi_add_device(sh, added[i]->bus,
- added[i]->target, added[i]->lun) == 0)
+ rc = hpsa_add_device(h, added[i]);
+ if (!rc)
continue;
- hpsa_show_dev_msg(KERN_WARNING, h, added[i],
- "addition failed, device not added.");
+ dev_warn(&h->pdev->dev,
+ "addition failed %d, device not added.", rc);
/* now we have to remove it from h->dev,
* since it didn't get added to scsi mid layer
*/
fixup_botched_add(h, added[i]);
- added[i] = NULL;
+ h->drv_req_rescan = 1;
}
free_and_out:
h = sdev_to_hba(sdev);
spin_lock_irqsave(&h->devlock, flags);
- sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
- sdev_id(sdev), sdev->lun);
- if (likely(sd)) {
+ if (sdev_channel(sdev) == HPSA_PHYSICAL_DEVICE_BUS) {
+ struct scsi_target *starget;
+ struct sas_rphy *rphy;
+
+ starget = scsi_target(sdev);
+ rphy = target_to_rphy(starget);
+ sd = hpsa_find_device_by_sas_rphy(h, rphy);
+ if (sd) {
+ sd->target = sdev_id(sdev);
+ sd->lun = sdev->lun;
+ }
+ } else
+ sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
+ sdev_id(sdev), sdev->lun);
+
+ if (sd && sd->expose_device) {
atomic_set(&sd->ioaccel_cmds_out, 0);
- sdev->hostdata = (sd->expose_state & HPSA_SCSI_ADD) ? sd : NULL;
+ sdev->hostdata = sd;
} else
sdev->hostdata = NULL;
spin_unlock_irqrestore(&h->devlock, flags);
int queue_depth;
sd = sdev->hostdata;
- sdev->no_uld_attach = !sd || !(sd->expose_state & HPSA_ULD_ATTACH);
+ sdev->no_uld_attach = !sd || !sd->expose_device;
if (sd)
queue_depth = sd->queue_depth != 0 ?
u32 chain_size;
chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex];
- chain_size = le32_to_cpu(cp->data_len);
+ chain_size = le32_to_cpu(cp->sg[0].length);
temp64 = pci_map_single(h->pdev, chain_block, chain_size,
PCI_DMA_TODEVICE);
if (dma_mapping_error(&h->pdev->dev, temp64)) {
chain_sg = cp->sg;
temp64 = le64_to_cpu(chain_sg->address);
- chain_size = le32_to_cpu(cp->data_len);
+ chain_size = le32_to_cpu(cp->sg[0].length);
pci_unmap_single(h->pdev, temp64, chain_size, PCI_DMA_TODEVICE);
}
* the normal I/O path so the controller can handle whatever's
* wrong.
*/
- if (is_logical_dev_addr_mode(dev->scsi3addr) &&
+ if (is_logical_device(dev) &&
c2->error_data.serv_response ==
IOACCEL2_SERV_RESPONSE_FAILURE) {
if (c2->error_data.status ==
* the normal I/O path so the controller can handle whatever's
* wrong.
*/
- if (is_logical_dev_addr_mode(dev->scsi3addr)) {
+ if (is_logical_device(dev)) {
if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
dev->offload_enabled = 0;
return hpsa_retry_cmd(h, cp);
/* fill_cmd can't fail here, no data buffer to map. */
- (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
+ (void) fill_cmd(c, reset_type, h, NULL, 0, 0,
scsi3addr, TYPE_MSG);
- c->Request.CDB[1] = reset_type; /* fill_cmd defaults to LUN reset */
rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
if (rc) {
dev_warn(&h->pdev->dev, "Failed to send reset command\n");
return rc;
}
+static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h,
+ unsigned char scsi3addr[], u16 bmic_device_index,
+ struct bmic_sense_subsystem_info *buf, size_t bufsize)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+
+ c = cmd_alloc(h);
+
+ rc = fill_cmd(c, BMIC_SENSE_SUBSYSTEM_INFORMATION, h, buf, bufsize,
+ 0, RAID_CTLR_LUNID, TYPE_CMD);
+ if (rc)
+ goto out;
+
+ c->Request.CDB[2] = bmic_device_index & 0xff;
+ c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ hpsa_scsi_interpret_error(h, c);
+ rc = -1;
+ }
+out:
+ cmd_free(h, c);
+ return rc;
+}
+
+static int hpsa_bmic_id_controller(struct ctlr_info *h,
+ struct bmic_identify_controller *buf, size_t bufsize)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+
+ c = cmd_alloc(h);
+
+ rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize,
+ 0, RAID_CTLR_LUNID, TYPE_CMD);
+ if (rc)
+ goto out;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ hpsa_scsi_interpret_error(h, c);
+ rc = -1;
+ }
+out:
+ cmd_free(h, c);
+ return rc;
+}
+
static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
unsigned char scsi3addr[], u16 bmic_device_index,
struct bmic_identify_physical_device *buf, size_t bufsize)
}
out:
cmd_free(h, c);
+
return rc;
}
+static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h,
+ unsigned char *scsi3addr)
+{
+ struct ReportExtendedLUNdata *physdev;
+ u32 nphysicals;
+ u64 sa = 0;
+ int i;
+
+ physdev = kzalloc(sizeof(*physdev), GFP_KERNEL);
+ if (!physdev)
+ return 0;
+
+ if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
+ dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
+ kfree(physdev);
+ return 0;
+ }
+ nphysicals = get_unaligned_be32(physdev->LUNListLength) / 24;
+
+ for (i = 0; i < nphysicals; i++)
+ if (!memcmp(&physdev->LUN[i].lunid[0], scsi3addr, 8)) {
+ sa = get_unaligned_be64(&physdev->LUN[i].wwid[0]);
+ break;
+ }
+
+ kfree(physdev);
+
+ return sa;
+}
+
+static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr,
+ struct hpsa_scsi_dev_t *dev)
+{
+ int rc;
+ u64 sa = 0;
+
+ if (is_hba_lunid(scsi3addr)) {
+ struct bmic_sense_subsystem_info *ssi;
+
+ ssi = kzalloc(sizeof(*ssi), GFP_KERNEL);
+ if (ssi == NULL) {
+ dev_warn(&h->pdev->dev,
+ "%s: out of memory\n", __func__);
+ return;
+ }
+
+ rc = hpsa_bmic_sense_subsystem_information(h,
+ scsi3addr, 0, ssi, sizeof(*ssi));
+ if (rc == 0) {
+ sa = get_unaligned_be64(ssi->primary_world_wide_id);
+ h->sas_address = sa;
+ }
+
+ kfree(ssi);
+ } else
+ sa = hpsa_get_sas_address_from_report_physical(h, scsi3addr);
+
+ dev->sas_address = sa;
+}
+
+/* Get a device id from inquiry page 0x83 */
static int hpsa_vpd_page_supported(struct ctlr_info *h,
unsigned char scsi3addr[], u8 page)
{
/* Get the device id from inquiry page 0x83 */
static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
- unsigned char *device_id, int buflen)
+ unsigned char *device_id, int index, int buflen)
{
int rc;
unsigned char *buf;
return -ENOMEM;
rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 0x83, buf, 64);
if (rc == 0)
- memcpy(device_id, &buf[8], buflen);
+ memcpy(device_id, &buf[index], buflen);
+
kfree(buf);
+
return rc != 0;
}
return rc;
}
+static void sanitize_inquiry_string(unsigned char *s, int len)
+{
+ bool terminated = false;
+
+ for (; len > 0; (--len, ++s)) {
+ if (*s == 0)
+ terminated = true;
+ if (terminated || *s < 0x20 || *s > 0x7e)
+ *s = ' ';
+ }
+}
+
static int hpsa_update_device_info(struct ctlr_info *h,
unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
unsigned char *is_OBDR_device)
unsigned char *inq_buff;
unsigned char *obdr_sig;
+ int rc = 0;
inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
- if (!inq_buff)
+ if (!inq_buff) {
+ rc = -ENOMEM;
goto bail_out;
+ }
/* Do an inquiry to the device to see what it is. */
if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
/* Inquiry failed (msg printed already) */
dev_err(&h->pdev->dev,
"hpsa_update_device_info: inquiry failed\n");
+ rc = -EIO;
goto bail_out;
}
+ sanitize_inquiry_string(&inq_buff[8], 8);
+ sanitize_inquiry_string(&inq_buff[16], 16);
+
this_device->devtype = (inq_buff[0] & 0x1f);
memcpy(this_device->scsi3addr, scsi3addr, 8);
memcpy(this_device->vendor, &inq_buff[8],
sizeof(this_device->model));
memset(this_device->device_id, 0,
sizeof(this_device->device_id));
- hpsa_get_device_id(h, scsi3addr, this_device->device_id,
+ hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8,
sizeof(this_device->device_id));
if (this_device->devtype == TYPE_DISK &&
bail_out:
kfree(inq_buff);
- return 1;
+ return rc;
}
static void hpsa_update_device_supports_aborts(struct ctlr_info *h,
}
}
-static unsigned char *ext_target_model[] = {
- "MSA2012",
- "MSA2024",
- "MSA2312",
- "MSA2324",
- "P2000 G3 SAS",
- "MSA 2040 SAS",
- NULL,
-};
-
-static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
-{
- int i;
-
- for (i = 0; ext_target_model[i]; i++)
- if (strncmp(device->model, ext_target_model[i],
- strlen(ext_target_model[i])) == 0)
- return 1;
- return 0;
-}
-
-/* Helper function to assign bus, target, lun mapping of devices.
- * Puts non-external target logical volumes on bus 0, external target logical
- * volumes on bus 1, physical devices on bus 2. and the hba on bus 3.
+/*
+ * Helper function to assign bus, target, lun mapping of devices.
* Logical drive target and lun are assigned at this time, but
* physical device lun and target assignment are deferred (assigned
* in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
- */
+*/
static void figure_bus_target_lun(struct ctlr_info *h,
u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device)
{
- u32 lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
+ u32 lunid = get_unaligned_le32(lunaddrbytes);
if (!is_logical_dev_addr_mode(lunaddrbytes)) {
/* physical device, target and lun filled in later */
if (is_hba_lunid(lunaddrbytes))
- hpsa_set_bus_target_lun(device, 3, 0, lunid & 0x3fff);
+ hpsa_set_bus_target_lun(device,
+ HPSA_HBA_BUS, 0, lunid & 0x3fff);
else
/* defer target, lun assignment for physical devices */
- hpsa_set_bus_target_lun(device, 2, -1, -1);
+ hpsa_set_bus_target_lun(device,
+ HPSA_PHYSICAL_DEVICE_BUS, -1, -1);
return;
}
/* It's a logical device */
- if (is_ext_target(h, device)) {
- /* external target way, put logicals on bus 1
- * and match target/lun numbers box
- * reports, other smart array, bus 0, target 0, match lunid
- */
+ if (device->external) {
hpsa_set_bus_target_lun(device,
- 1, (lunid >> 16) & 0x3fff, lunid & 0x00ff);
+ HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff,
+ lunid & 0x00ff);
return;
}
- hpsa_set_bus_target_lun(device, 0, 0, lunid & 0x3fff);
+ hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS,
+ 0, lunid & 0x3fff);
}
-/*
- * If there is no lun 0 on a target, linux won't find any devices.
- * For the external targets (arrays), we have to manually detect the enclosure
- * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report
- * it for some reason. *tmpdevice is the target we're adding,
- * this_device is a pointer into the current element of currentsd[]
- * that we're building up in update_scsi_devices(), below.
- * lunzerobits is a bitmap that tracks which targets already have a
- * lun 0 assigned.
- * Returns 1 if an enclosure was added, 0 if not.
- */
-static int add_ext_target_dev(struct ctlr_info *h,
- struct hpsa_scsi_dev_t *tmpdevice,
- struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes,
- unsigned long lunzerobits[], int *n_ext_target_devs)
-{
- unsigned char scsi3addr[8];
-
- if (test_bit(tmpdevice->target, lunzerobits))
- return 0; /* There is already a lun 0 on this target. */
-
- if (!is_logical_dev_addr_mode(lunaddrbytes))
- return 0; /* It's the logical targets that may lack lun 0. */
-
- if (!is_ext_target(h, tmpdevice))
- return 0; /* Only external target devices have this problem. */
-
- if (tmpdevice->lun == 0) /* if lun is 0, then we have a lun 0. */
- return 0;
-
- memset(scsi3addr, 0, 8);
- scsi3addr[3] = tmpdevice->target;
- if (is_hba_lunid(scsi3addr))
- return 0; /* Don't add the RAID controller here. */
-
- if (is_scsi_rev_5(h))
- return 0; /* p1210m doesn't need to do this. */
-
- if (*n_ext_target_devs >= MAX_EXT_TARGETS) {
- dev_warn(&h->pdev->dev, "Maximum number of external "
- "target devices exceeded. Check your hardware "
- "configuration.");
- return 0;
- }
-
- if (hpsa_update_device_info(h, scsi3addr, this_device, NULL))
- return 0;
- (*n_ext_target_devs)++;
- hpsa_set_bus_target_lun(this_device,
- tmpdevice->bus, tmpdevice->target, 0);
- hpsa_update_device_supports_aborts(h, this_device, scsi3addr);
- set_bit(tmpdevice->target, lunzerobits);
- return 1;
-}
/*
* Get address of physical disk used for an ioaccel2 mode command:
return 0;
}
+static int figure_external_status(struct ctlr_info *h, int raid_ctlr_position,
+ int i, int nphysicals, int nlocal_logicals)
+{
+ /* In report logicals, local logicals are listed first,
+ * then any externals.
+ */
+ int logicals_start = nphysicals + (raid_ctlr_position == 0);
+
+ if (i == raid_ctlr_position)
+ return 0;
+
+ if (i < logicals_start)
+ return 0;
+
+ /* i is in logicals range, but still within local logicals */
+ if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals)
+ return 0;
+
+ return 1; /* it's an external lun */
+}
+
/*
* Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
* logdev. The number of luns in physdev and logdev are returned in
/* get physical drive ioaccel handle and queue depth */
static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
struct hpsa_scsi_dev_t *dev,
- u8 *lunaddrbytes,
+ struct ReportExtendedLUNdata *rlep, int rle_index,
struct bmic_identify_physical_device *id_phys)
{
int rc;
- struct ext_report_lun_entry *rle =
- (struct ext_report_lun_entry *) lunaddrbytes;
+ struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
dev->ioaccel_handle = rle->ioaccel_handle;
- if (PHYS_IOACCEL(lunaddrbytes) && dev->ioaccel_handle)
+ if ((rle->device_flags & 0x08) && dev->ioaccel_handle)
dev->hba_ioaccel_enabled = 1;
memset(id_phys, 0, sizeof(*id_phys));
- rc = hpsa_bmic_id_physical_device(h, lunaddrbytes,
- GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys,
+ rc = hpsa_bmic_id_physical_device(h, &rle->lunid[0],
+ GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]), id_phys,
sizeof(*id_phys));
if (!rc)
/* Reserve space for FW operations */
DRIVE_CMDS_RESERVED_FOR_FW;
else
dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */
- atomic_set(&dev->ioaccel_cmds_out, 0);
- atomic_set(&dev->reset_cmds_out, 0);
}
static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device,
- u8 *lunaddrbytes,
+ struct ReportExtendedLUNdata *rlep, int rle_index,
struct bmic_identify_physical_device *id_phys)
{
- if (PHYS_IOACCEL(lunaddrbytes)
- && this_device->ioaccel_handle)
+ struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
+
+ if ((rle->device_flags & 0x08) && this_device->ioaccel_handle)
this_device->hba_ioaccel_enabled = 1;
memcpy(&this_device->active_path_index,
sizeof(this_device->bay));
}
-static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
+/* get number of local logical disks. */
+static int hpsa_set_local_logical_count(struct ctlr_info *h,
+ struct bmic_identify_controller *id_ctlr,
+ u32 *nlocals)
+{
+ int rc;
+
+ if (!id_ctlr) {
+ dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n",
+ __func__);
+ return -ENOMEM;
+ }
+ memset(id_ctlr, 0, sizeof(*id_ctlr));
+ rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr));
+ if (!rc)
+ if (id_ctlr->configured_logical_drive_count < 256)
+ *nlocals = id_ctlr->configured_logical_drive_count;
+ else
+ *nlocals = le16_to_cpu(
+ id_ctlr->extended_logical_unit_count);
+ else
+ *nlocals = -1;
+ return rc;
+}
+
+
+static void hpsa_update_scsi_devices(struct ctlr_info *h)
{
/* the idea here is we could get notified
* that some devices have changed, so we do a report
struct ReportExtendedLUNdata *physdev_list = NULL;
struct ReportLUNdata *logdev_list = NULL;
struct bmic_identify_physical_device *id_phys = NULL;
+ struct bmic_identify_controller *id_ctlr = NULL;
u32 nphysicals = 0;
u32 nlogicals = 0;
+ u32 nlocal_logicals = 0;
u32 ndev_allocated = 0;
struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
int ncurrent = 0;
int i, n_ext_target_devs, ndevs_to_allocate;
int raid_ctlr_position;
+ bool physical_device;
DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
+ id_ctlr = kzalloc(sizeof(*id_ctlr), GFP_KERNEL);
if (!currentsd || !physdev_list || !logdev_list ||
- !tmpdevice || !id_phys) {
+ !tmpdevice || !id_phys || !id_ctlr) {
dev_err(&h->pdev->dev, "out of memory\n");
goto out;
}
memset(lunzerobits, 0, sizeof(lunzerobits));
+ h->drv_req_rescan = 0; /* cancel scheduled rescan - we're doing it. */
+
if (hpsa_gather_lun_info(h, physdev_list, &nphysicals,
- logdev_list, &nlogicals))
+ logdev_list, &nlogicals)) {
+ h->drv_req_rescan = 1;
goto out;
+ }
+
+ /* Set number of local logicals (non PTRAID) */
+ if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) {
+ dev_warn(&h->pdev->dev,
+ "%s: Can't determine number of local logical devices.\n",
+ __func__);
+ }
/* We might see up to the maximum number of logical and physical disks
* plus external target devices, and a device for the local RAID
if (!currentsd[i]) {
dev_warn(&h->pdev->dev, "out of memory at %s:%d\n",
__FILE__, __LINE__);
+ h->drv_req_rescan = 1;
goto out;
}
ndev_allocated++;
n_ext_target_devs = 0;
for (i = 0; i < nphysicals + nlogicals + 1; i++) {
u8 *lunaddrbytes, is_OBDR = 0;
+ int rc = 0;
+ int phys_dev_index = i - (raid_ctlr_position == 0);
+
+ physical_device = i < nphysicals + (raid_ctlr_position == 0);
/* Figure out where the LUN ID info is coming from */
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
i, nphysicals, nlogicals, physdev_list, logdev_list);
/* skip masked non-disk devices */
- if (MASKED_DEVICE(lunaddrbytes))
- if (i < nphysicals + (raid_ctlr_position == 0) &&
- NON_DISK_PHYS_DEV(lunaddrbytes))
- continue;
+ if (MASKED_DEVICE(lunaddrbytes) && physical_device &&
+ (physdev_list->LUN[phys_dev_index].device_flags & 0x01))
+ continue;
/* Get device type, vendor, model, device id */
- if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
- &is_OBDR))
- continue; /* skip it if we can't talk to it. */
+ rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
+ &is_OBDR);
+ if (rc == -ENOMEM) {
+ dev_warn(&h->pdev->dev,
+ "Out of memory, rescan deferred.\n");
+ h->drv_req_rescan = 1;
+ goto out;
+ }
+ if (rc) {
+ dev_warn(&h->pdev->dev,
+ "Inquiry failed, skipping device.\n");
+ continue;
+ }
+
+ /* Determine if this is a lun from an external target array */
+ tmpdevice->external =
+ figure_external_status(h, raid_ctlr_position, i,
+ nphysicals, nlocal_logicals);
+
figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
hpsa_update_device_supports_aborts(h, tmpdevice, lunaddrbytes);
this_device = currentsd[ncurrent];
- /*
- * For external target devices, we have to insert a LUN 0 which
- * doesn't show up in CCISS_REPORT_PHYSICAL data, but there
- * is nonetheless an enclosure device there. We have to
- * present that otherwise linux won't find anything if
- * there is no lun 0.
+ /* Turn on discovery_polling if there are ext target devices.
+ * Event-based change notification is unreliable for those.
*/
- if (add_ext_target_dev(h, tmpdevice, this_device,
- lunaddrbytes, lunzerobits,
- &n_ext_target_devs)) {
- ncurrent++;
- this_device = currentsd[ncurrent];
+ if (!h->discovery_polling) {
+ if (tmpdevice->external) {
+ h->discovery_polling = 1;
+ dev_info(&h->pdev->dev,
+ "External target, activate discovery polling.\n");
+ }
}
+
*this_device = *tmpdevice;
+ this_device->physical_device = physical_device;
- /* do not expose masked devices */
- if (MASKED_DEVICE(lunaddrbytes) &&
- i < nphysicals + (raid_ctlr_position == 0)) {
- this_device->expose_state = HPSA_DO_NOT_EXPOSE;
- } else {
- this_device->expose_state =
- HPSA_SG_ATTACH | HPSA_ULD_ATTACH;
- }
+ /*
+ * Expose all devices except for physical devices that
+ * are masked.
+ */
+ if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device)
+ this_device->expose_device = 0;
+ else
+ this_device->expose_device = 1;
+
+
+ /*
+ * Get the SAS address for physical devices that are exposed.
+ */
+ if (this_device->physical_device && this_device->expose_device)
+ hpsa_get_sas_address(h, lunaddrbytes, this_device);
switch (this_device->devtype) {
case TYPE_ROM:
ncurrent++;
break;
case TYPE_DISK:
- if (i < nphysicals + (raid_ctlr_position == 0)) {
+ if (this_device->physical_device) {
/* The disk is in HBA mode. */
/* Never use RAID mapper in HBA mode. */
this_device->offload_enabled = 0;
hpsa_get_ioaccel_drive_info(h, this_device,
- lunaddrbytes, id_phys);
- hpsa_get_path_info(this_device, lunaddrbytes,
- id_phys);
+ physdev_list, phys_dev_index, id_phys);
+ hpsa_get_path_info(this_device,
+ physdev_list, phys_dev_index, id_phys);
}
ncurrent++;
break;
if (ncurrent >= HPSA_MAX_DEVICES)
break;
}
- adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
+
+ if (h->sas_host == NULL) {
+ int rc = 0;
+
+ rc = hpsa_add_sas_host(h);
+ if (rc) {
+ dev_warn(&h->pdev->dev,
+ "Could not add sas host %d\n", rc);
+ goto out;
+ }
+ }
+
+ adjust_hpsa_scsi_table(h, currentsd, ncurrent);
out:
kfree(tmpdevice);
for (i = 0; i < ndev_allocated; i++)
kfree(currentsd);
kfree(physdev_list);
kfree(logdev_list);
+ kfree(id_ctlr);
kfree(id_phys);
}
case READ_6:
case READ_12:
if (*cdb_len == 6) {
- block = (((u32) cdb[2]) << 8) | cdb[3];
+ block = get_unaligned_be16(&cdb[2]);
block_cnt = cdb[4];
+ if (block_cnt == 0)
+ block_cnt = 256;
} else {
BUG_ON(*cdb_len != 12);
- block = (((u32) cdb[2]) << 24) |
- (((u32) cdb[3]) << 16) |
- (((u32) cdb[4]) << 8) |
- cdb[5];
- block_cnt =
- (((u32) cdb[6]) << 24) |
- (((u32) cdb[7]) << 16) |
- (((u32) cdb[8]) << 8) |
- cdb[9];
+ block = get_unaligned_be32(&cdb[2]);
+ block_cnt = get_unaligned_be32(&cdb[6]);
}
if (block_cnt > 0xffff)
return IO_ACCEL_INELIGIBLE;
/* fill in sg elements */
if (use_sg > h->ioaccel_maxsg) {
cp->sg_count = 1;
+ cp->sg[0].length = cpu_to_le32(use_sg * sizeof(cp->sg[0]));
if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) {
atomic_dec(&phys_disk->ioaccel_cmds_out);
scsi_dma_unmap(cmd);
case WRITE_6:
is_write = 1;
case READ_6:
- first_block =
- (((u64) cmd->cmnd[2]) << 8) |
- cmd->cmnd[3];
+ first_block = get_unaligned_be16(&cmd->cmnd[2]);
block_cnt = cmd->cmnd[4];
if (block_cnt == 0)
block_cnt = 256;
if (unlikely(lockup_detected(h)))
return hpsa_scan_complete(h);
- hpsa_update_scsi_devices(h, h->scsi_host->host_no);
+ hpsa_update_scsi_devices(h);
hpsa_scan_complete(h);
}
static int hpsa_scsi_host_alloc(struct ctlr_info *h)
{
struct Scsi_Host *sh;
- int error;
sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h));
if (sh == NULL) {
sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
sh->cmd_per_lun = sh->can_queue;
sh->sg_tablesize = h->maxsgentries;
+ sh->transportt = hpsa_sas_transport_template;
sh->hostdata[0] = (unsigned long) h;
sh->irq = h->intr[h->intr_mode];
sh->unique_id = sh->irq;
- error = scsi_init_shared_tag_map(sh, sh->can_queue);
- if (error) {
- dev_err(&h->pdev->dev,
- "%s: scsi_init_shared_tag_map failed for controller %d\n",
- __func__, h->ctlr);
- scsi_host_put(sh);
- return error;
- }
+
h->scsi_host = sh;
return 0;
}
int rc;
struct ctlr_info *h;
struct hpsa_scsi_dev_t *dev;
+ u8 reset_type;
char msg[48];
/* find the controller to which the command to be aborted was sent */
if (is_hba_lunid(dev->scsi3addr))
return SUCCESS;
- hpsa_show_dev_msg(KERN_WARNING, h, dev, "resetting");
+ if (is_logical_dev_addr_mode(dev->scsi3addr))
+ reset_type = HPSA_DEVICE_RESET_MSG;
+ else
+ reset_type = HPSA_PHYS_TARGET_RESET;
+
+ sprintf(msg, "resetting %s",
+ reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ");
+ hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
+
+ h->reset_in_progress = 1;
/* send a reset to the SCSI LUN which the command was sent to */
- rc = hpsa_do_reset(h, dev, dev->scsi3addr, HPSA_RESET_TYPE_LUN,
+ rc = hpsa_do_reset(h, dev, dev->scsi3addr, reset_type,
DEFAULT_REPLY_QUEUE);
- snprintf(msg, sizeof(msg), "reset %s",
- rc == 0 ? "completed successfully" : "failed");
+ sprintf(msg, "reset %s %s",
+ reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ",
+ rc == 0 ? "completed successfully" : "failed");
hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
+ h->reset_in_progress = 0;
return rc == 0 ? SUCCESS : FAILED;
}
c->Request.CDB[8] = (size >> 8) & 0xFF;
c->Request.CDB[9] = size & 0xFF;
break;
+ case BMIC_SENSE_DIAG_OPTIONS:
+ c->Request.CDBLen = 16;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ /* Spec says this should be BMIC_WRITE */
+ c->Request.CDB[0] = BMIC_READ;
+ c->Request.CDB[6] = BMIC_SENSE_DIAG_OPTIONS;
+ break;
+ case BMIC_SET_DIAG_OPTIONS:
+ c->Request.CDBLen = 16;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type,
+ ATTR_SIMPLE, XFER_WRITE);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_WRITE;
+ c->Request.CDB[6] = BMIC_SET_DIAG_OPTIONS;
+ break;
case HPSA_CACHE_FLUSH:
c->Request.CDBLen = 12;
c->Request.type_attr_dir =
c->Request.CDB[7] = (size >> 16) & 0xFF;
c->Request.CDB[8] = (size >> 8) & 0XFF;
break;
+ case BMIC_SENSE_SUBSYSTEM_INFORMATION:
+ c->Request.CDBLen = 10;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_READ;
+ c->Request.CDB[6] = BMIC_SENSE_SUBSYSTEM_INFORMATION;
+ c->Request.CDB[7] = (size >> 16) & 0xFF;
+ c->Request.CDB[8] = (size >> 8) & 0XFF;
+ break;
+ case BMIC_IDENTIFY_CONTROLLER:
+ c->Request.CDBLen = 10;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_READ;
+ c->Request.CDB[1] = 0;
+ c->Request.CDB[2] = 0;
+ c->Request.CDB[3] = 0;
+ c->Request.CDB[4] = 0;
+ c->Request.CDB[5] = 0;
+ c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER;
+ c->Request.CDB[7] = (size >> 16) & 0xFF;
+ c->Request.CDB[8] = (size >> 8) & 0XFF;
+ c->Request.CDB[9] = 0;
+ break;
default:
dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
BUG();
} else if (cmd_type == TYPE_MSG) {
switch (cmd) {
+ case HPSA_PHYS_TARGET_RESET:
+ c->Request.CDBLen = 16;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
+ c->Request.Timeout = 0; /* Don't time out */
+ memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
+ c->Request.CDB[0] = HPSA_RESET;
+ c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE;
+ /* Physical target reset needs no control bytes 4-7*/
+ c->Request.CDB[4] = 0x00;
+ c->Request.CDB[5] = 0x00;
+ c->Request.CDB[6] = 0x00;
+ c->Request.CDB[7] = 0x00;
+ break;
case HPSA_DEVICE_RESET_MSG:
c->Request.CDBLen = 16;
c->Request.type_attr_dir =
complete(c->waiting);
}
-
-static inline u32 hpsa_tag_discard_error_bits(struct ctlr_info *h, u32 tag)
-{
-#define HPSA_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1)
-#define HPSA_SIMPLE_ERROR_BITS 0x03
- if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
- return tag & ~HPSA_SIMPLE_ERROR_BITS;
- return tag & ~HPSA_PERF_ERROR_BITS;
-}
-
/* process completion of an indexed ("direct lookup") command */
static inline void process_indexed_cmd(struct ctlr_info *h,
u32 raw_tag)
*/
static int hpsa_ctlr_needs_rescan(struct ctlr_info *h)
{
+ if (h->drv_req_rescan) {
+ h->drv_req_rescan = 0;
+ return 1;
+ }
+
if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
return 0;
return 0;
}
+static int hpsa_luns_changed(struct ctlr_info *h)
+{
+ int rc = 1; /* assume there are changes */
+ struct ReportLUNdata *logdev = NULL;
+
+ /* if we can't find out if lun data has changed,
+ * assume that it has.
+ */
+
+ if (!h->lastlogicals)
+ goto out;
+
+ logdev = kzalloc(sizeof(*logdev), GFP_KERNEL);
+ if (!logdev) {
+ dev_warn(&h->pdev->dev,
+ "Out of memory, can't track lun changes.\n");
+ goto out;
+ }
+ if (hpsa_scsi_do_report_luns(h, 1, logdev, sizeof(*logdev), 0)) {
+ dev_warn(&h->pdev->dev,
+ "report luns failed, can't track lun changes.\n");
+ goto out;
+ }
+ if (memcmp(logdev, h->lastlogicals, sizeof(*logdev))) {
+ dev_info(&h->pdev->dev,
+ "Lun changes detected.\n");
+ memcpy(h->lastlogicals, logdev, sizeof(*logdev));
+ goto out;
+ } else
+ rc = 0; /* no changes detected. */
+out:
+ kfree(logdev);
+ return rc;
+}
+
static void hpsa_rescan_ctlr_worker(struct work_struct *work)
{
unsigned long flags;
hpsa_ack_ctlr_events(h);
hpsa_scan_start(h->scsi_host);
scsi_host_put(h->scsi_host);
+ } else if (h->discovery_polling) {
+ hpsa_disable_rld_caching(h);
+ if (hpsa_luns_changed(h)) {
+ struct Scsi_Host *sh = NULL;
+
+ dev_info(&h->pdev->dev,
+ "driver discovery polling rescan.\n");
+ sh = scsi_host_get(h->scsi_host);
+ if (sh != NULL) {
+ hpsa_scan_start(sh);
+ scsi_host_put(sh);
+ }
+ }
}
spin_lock_irqsave(&h->lock, flags);
if (!h->remove_in_progress)
/* Enable Accelerated IO path at driver layer */
h->acciopath_status = 1;
+ /* Disable discovery polling.*/
+ h->discovery_polling = 0;
/* Turn the interrupts on so we can service requests */
hpsa_hba_inquiry(h);
+ h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL);
+ if (!h->lastlogicals)
+ dev_info(&h->pdev->dev,
+ "Can't track change to report lun data\n");
+
/* Monitor the controller for firmware lockups */
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
kfree(flush_buf);
}
+/* Make controller gather fresh report lun data each time we
+ * send down a report luns request
+ */
+static void hpsa_disable_rld_caching(struct ctlr_info *h)
+{
+ u32 *options;
+ struct CommandList *c;
+ int rc;
+
+ /* Don't bother trying to set diag options if locked up */
+ if (unlikely(h->lockup_detected))
+ return;
+
+ options = kzalloc(sizeof(*options), GFP_KERNEL);
+ if (!options) {
+ dev_err(&h->pdev->dev,
+ "Error: failed to disable rld caching, during alloc.\n");
+ return;
+ }
+
+ c = cmd_alloc(h);
+
+ /* first, get the current diag options settings */
+ if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
+ RAID_CTLR_LUNID, TYPE_CMD))
+ goto errout;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if ((rc != 0) || (c->err_info->CommandStatus != 0))
+ goto errout;
+
+ /* Now, set the bit for disabling the RLD caching */
+ *options |= HPSA_DIAG_OPTS_DISABLE_RLD_CACHING;
+
+ if (fill_cmd(c, BMIC_SET_DIAG_OPTIONS, h, options, 4, 0,
+ RAID_CTLR_LUNID, TYPE_CMD))
+ goto errout;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_TODEVICE, NO_TIMEOUT);
+ if ((rc != 0) || (c->err_info->CommandStatus != 0))
+ goto errout;
+
+ /* Now verify that it got set: */
+ if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
+ RAID_CTLR_LUNID, TYPE_CMD))
+ goto errout;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if ((rc != 0) || (c->err_info->CommandStatus != 0))
+ goto errout;
+
+ if (*options && HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
+ goto out;
+
+errout:
+ dev_err(&h->pdev->dev,
+ "Error: failed to disable report lun data caching.\n");
+out:
+ cmd_free(h, c);
+ kfree(options);
+}
+
static void hpsa_shutdown(struct pci_dev *pdev)
{
struct ctlr_info *h;
hpsa_free_performant_mode(h); /* init_one 7 */
hpsa_free_sg_chain_blocks(h); /* init_one 6 */
hpsa_free_cmd_pool(h); /* init_one 5 */
+ kfree(h->lastlogicals);
/* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */
free_percpu(h->lockup_detected); /* init_one 2 */
h->lockup_detected = NULL; /* init_one 2 */
/* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */
+
+ hpsa_delete_sas_host(h);
+
kfree(h); /* init_one 1 */
}
} while (1);
}
+static struct hpsa_sas_phy *hpsa_alloc_sas_phy(
+ struct hpsa_sas_port *hpsa_sas_port)
+{
+ struct hpsa_sas_phy *hpsa_sas_phy;
+ struct sas_phy *phy;
+
+ hpsa_sas_phy = kzalloc(sizeof(*hpsa_sas_phy), GFP_KERNEL);
+ if (!hpsa_sas_phy)
+ return NULL;
+
+ phy = sas_phy_alloc(hpsa_sas_port->parent_node->parent_dev,
+ hpsa_sas_port->next_phy_index);
+ if (!phy) {
+ kfree(hpsa_sas_phy);
+ return NULL;
+ }
+
+ hpsa_sas_port->next_phy_index++;
+ hpsa_sas_phy->phy = phy;
+ hpsa_sas_phy->parent_port = hpsa_sas_port;
+
+ return hpsa_sas_phy;
+}
+
+static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy)
+{
+ struct sas_phy *phy = hpsa_sas_phy->phy;
+
+ sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
+ sas_phy_free(phy);
+ if (hpsa_sas_phy->added_to_port)
+ list_del(&hpsa_sas_phy->phy_list_entry);
+ kfree(hpsa_sas_phy);
+}
+
+static int hpsa_sas_port_add_phy(struct hpsa_sas_phy *hpsa_sas_phy)
+{
+ int rc;
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct sas_phy *phy;
+ struct sas_identify *identify;
+
+ hpsa_sas_port = hpsa_sas_phy->parent_port;
+ phy = hpsa_sas_phy->phy;
+
+ identify = &phy->identify;
+ memset(identify, 0, sizeof(*identify));
+ identify->sas_address = hpsa_sas_port->sas_address;
+ identify->device_type = SAS_END_DEVICE;
+ identify->initiator_port_protocols = SAS_PROTOCOL_STP;
+ identify->target_port_protocols = SAS_PROTOCOL_STP;
+ phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+ phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+ phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+ rc = sas_phy_add(hpsa_sas_phy->phy);
+ if (rc)
+ return rc;
+
+ sas_port_add_phy(hpsa_sas_port->port, hpsa_sas_phy->phy);
+ list_add_tail(&hpsa_sas_phy->phy_list_entry,
+ &hpsa_sas_port->phy_list_head);
+ hpsa_sas_phy->added_to_port = true;
+
+ return 0;
+}
+
+static int
+ hpsa_sas_port_add_rphy(struct hpsa_sas_port *hpsa_sas_port,
+ struct sas_rphy *rphy)
+{
+ struct sas_identify *identify;
+
+ identify = &rphy->identify;
+ identify->sas_address = hpsa_sas_port->sas_address;
+ identify->initiator_port_protocols = SAS_PROTOCOL_STP;
+ identify->target_port_protocols = SAS_PROTOCOL_STP;
+
+ return sas_rphy_add(rphy);
+}
+
+static struct hpsa_sas_port
+ *hpsa_alloc_sas_port(struct hpsa_sas_node *hpsa_sas_node,
+ u64 sas_address)
+{
+ int rc;
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct sas_port *port;
+
+ hpsa_sas_port = kzalloc(sizeof(*hpsa_sas_port), GFP_KERNEL);
+ if (!hpsa_sas_port)
+ return NULL;
+
+ INIT_LIST_HEAD(&hpsa_sas_port->phy_list_head);
+ hpsa_sas_port->parent_node = hpsa_sas_node;
+
+ port = sas_port_alloc_num(hpsa_sas_node->parent_dev);
+ if (!port)
+ goto free_hpsa_port;
+
+ rc = sas_port_add(port);
+ if (rc)
+ goto free_sas_port;
+
+ hpsa_sas_port->port = port;
+ hpsa_sas_port->sas_address = sas_address;
+ list_add_tail(&hpsa_sas_port->port_list_entry,
+ &hpsa_sas_node->port_list_head);
+
+ return hpsa_sas_port;
+
+free_sas_port:
+ sas_port_free(port);
+free_hpsa_port:
+ kfree(hpsa_sas_port);
+
+ return NULL;
+}
+
+static void hpsa_free_sas_port(struct hpsa_sas_port *hpsa_sas_port)
+{
+ struct hpsa_sas_phy *hpsa_sas_phy;
+ struct hpsa_sas_phy *next;
+
+ list_for_each_entry_safe(hpsa_sas_phy, next,
+ &hpsa_sas_port->phy_list_head, phy_list_entry)
+ hpsa_free_sas_phy(hpsa_sas_phy);
+
+ sas_port_delete(hpsa_sas_port->port);
+ list_del(&hpsa_sas_port->port_list_entry);
+ kfree(hpsa_sas_port);
+}
+
+static struct hpsa_sas_node *hpsa_alloc_sas_node(struct device *parent_dev)
+{
+ struct hpsa_sas_node *hpsa_sas_node;
+
+ hpsa_sas_node = kzalloc(sizeof(*hpsa_sas_node), GFP_KERNEL);
+ if (hpsa_sas_node) {
+ hpsa_sas_node->parent_dev = parent_dev;
+ INIT_LIST_HEAD(&hpsa_sas_node->port_list_head);
+ }
+
+ return hpsa_sas_node;
+}
+
+static void hpsa_free_sas_node(struct hpsa_sas_node *hpsa_sas_node)
+{
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct hpsa_sas_port *next;
+
+ if (!hpsa_sas_node)
+ return;
+
+ list_for_each_entry_safe(hpsa_sas_port, next,
+ &hpsa_sas_node->port_list_head, port_list_entry)
+ hpsa_free_sas_port(hpsa_sas_port);
+
+ kfree(hpsa_sas_node);
+}
+
+static struct hpsa_scsi_dev_t
+ *hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
+ struct sas_rphy *rphy)
+{
+ int i;
+ struct hpsa_scsi_dev_t *device;
+
+ for (i = 0; i < h->ndevices; i++) {
+ device = h->dev[i];
+ if (!device->sas_port)
+ continue;
+ if (device->sas_port->rphy == rphy)
+ return device;
+ }
+
+ return NULL;
+}
+
+static int hpsa_add_sas_host(struct ctlr_info *h)
+{
+ int rc;
+ struct device *parent_dev;
+ struct hpsa_sas_node *hpsa_sas_node;
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct hpsa_sas_phy *hpsa_sas_phy;
+
+ parent_dev = &h->scsi_host->shost_gendev;
+
+ hpsa_sas_node = hpsa_alloc_sas_node(parent_dev);
+ if (!hpsa_sas_node)
+ return -ENOMEM;
+
+ hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, h->sas_address);
+ if (!hpsa_sas_port) {
+ rc = -ENODEV;
+ goto free_sas_node;
+ }
+
+ hpsa_sas_phy = hpsa_alloc_sas_phy(hpsa_sas_port);
+ if (!hpsa_sas_phy) {
+ rc = -ENODEV;
+ goto free_sas_port;
+ }
+
+ rc = hpsa_sas_port_add_phy(hpsa_sas_phy);
+ if (rc)
+ goto free_sas_phy;
+
+ h->sas_host = hpsa_sas_node;
+
+ return 0;
+
+free_sas_phy:
+ hpsa_free_sas_phy(hpsa_sas_phy);
+free_sas_port:
+ hpsa_free_sas_port(hpsa_sas_port);
+free_sas_node:
+ hpsa_free_sas_node(hpsa_sas_node);
+
+ return rc;
+}
+
+static void hpsa_delete_sas_host(struct ctlr_info *h)
+{
+ hpsa_free_sas_node(h->sas_host);
+}
+
+static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
+ struct hpsa_scsi_dev_t *device)
+{
+ int rc;
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct sas_rphy *rphy;
+
+ hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, device->sas_address);
+ if (!hpsa_sas_port)
+ return -ENOMEM;
+
+ rphy = sas_end_device_alloc(hpsa_sas_port->port);
+ if (!rphy) {
+ rc = -ENODEV;
+ goto free_sas_port;
+ }
+
+ hpsa_sas_port->rphy = rphy;
+ device->sas_port = hpsa_sas_port;
+
+ rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy);
+ if (rc)
+ goto free_sas_port;
+
+ return 0;
+
+free_sas_port:
+ hpsa_free_sas_port(hpsa_sas_port);
+ device->sas_port = NULL;
+
+ return rc;
+}
+
+static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device)
+{
+ if (device->sas_port) {
+ hpsa_free_sas_port(device->sas_port);
+ device->sas_port = NULL;
+ }
+}
+
+static int
+hpsa_sas_get_linkerrors(struct sas_phy *phy)
+{
+ return 0;
+}
+
+static int
+hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+{
+ return 0;
+}
+
+static int
+hpsa_sas_get_bay_identifier(struct sas_rphy *rphy)
+{
+ return -ENXIO;
+}
+
+static int
+hpsa_sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+ return 0;
+}
+
+static int
+hpsa_sas_phy_enable(struct sas_phy *phy, int enable)
+{
+ return 0;
+}
+
+static int
+hpsa_sas_phy_setup(struct sas_phy *phy)
+{
+ return 0;
+}
+
+static void
+hpsa_sas_phy_release(struct sas_phy *phy)
+{
+}
+
+static int
+hpsa_sas_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
+{
+ return -EINVAL;
+}
+
+/* SMP = Serial Management Protocol */
+static int
+hpsa_sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+struct request *req)
+{
+ return -EINVAL;
+}
+
+static struct sas_function_template hpsa_sas_transport_functions = {
+ .get_linkerrors = hpsa_sas_get_linkerrors,
+ .get_enclosure_identifier = hpsa_sas_get_enclosure_identifier,
+ .get_bay_identifier = hpsa_sas_get_bay_identifier,
+ .phy_reset = hpsa_sas_phy_reset,
+ .phy_enable = hpsa_sas_phy_enable,
+ .phy_setup = hpsa_sas_phy_setup,
+ .phy_release = hpsa_sas_phy_release,
+ .set_phy_speed = hpsa_sas_phy_speed,
+ .smp_handler = hpsa_sas_smp_handler,
+};
+
/*
* This is it. Register the PCI driver information for the cards we control
* the OS will call our registered routines when it finds one of our cards.
*/
static int __init hpsa_init(void)
{
- return pci_register_driver(&hpsa_pci_driver);
+ int rc;
+
+ hpsa_sas_transport_template =
+ sas_attach_transport(&hpsa_sas_transport_functions);
+ if (!hpsa_sas_transport_template)
+ return -ENODEV;
+
+ rc = pci_register_driver(&hpsa_pci_driver);
+
+ if (rc)
+ sas_release_transport(hpsa_sas_transport_template);
+
+ return rc;
}
static void __exit hpsa_cleanup(void)
{
pci_unregister_driver(&hpsa_pci_driver);
+ sas_release_transport(hpsa_sas_transport_template);
}
static void __attribute__((unused)) verify_offsets(void)
unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
};
+/* for SAS hosts and SAS expanders */
+struct hpsa_sas_node {
+ struct device *parent_dev;
+ struct list_head port_list_head;
+};
+
+struct hpsa_sas_port {
+ struct list_head port_list_entry;
+ u64 sas_address;
+ struct sas_port *port;
+ int next_phy_index;
+ struct list_head phy_list_head;
+ struct hpsa_sas_node *parent_node;
+ struct sas_rphy *rphy;
+};
+
+struct hpsa_sas_phy {
+ struct list_head phy_list_entry;
+ struct sas_phy *phy;
+ struct hpsa_sas_port *parent_port;
+ bool added_to_port;
+};
+
struct hpsa_scsi_dev_t {
- int devtype;
+ unsigned int devtype;
int bus, target, lun; /* as presented to the OS */
unsigned char scsi3addr[8]; /* as presented to the HW */
+ u8 physical_device : 1;
+ u8 expose_device;
#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
unsigned char device_id[16]; /* from inquiry pg. 0x83 */
+ u64 sas_address;
unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
unsigned char model[16]; /* bytes 16-31 of inquiry data */
unsigned char raid_level; /* from inquiry page 0xC1 */
struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
int nphysical_disks;
int supports_aborts;
-#define HPSA_DO_NOT_EXPOSE 0x0
-#define HPSA_SG_ATTACH 0x1
-#define HPSA_ULD_ATTACH 0x2
-#define HPSA_SCSI_ADD (HPSA_SG_ATTACH | HPSA_ULD_ATTACH)
- u8 expose_state;
+ struct hpsa_sas_port *sas_port;
+ int external; /* 1-from external array 0-not <0-unknown */
};
struct reply_queue_buffer {
char *product_name;
struct pci_dev *pdev;
u32 board_id;
+ u64 sas_address;
void __iomem *vaddr;
unsigned long paddr;
int nr_cmds; /* Number of commands allowed on this controller */
spinlock_t offline_device_lock;
struct list_head offline_device_list;
int acciopath_status;
+ int drv_req_rescan;
int raid_offload_debug;
+ int discovery_polling;
+ struct ReportLUNdata *lastlogicals;
int needs_abort_tags_swizzled;
struct workqueue_struct *resubmit_wq;
struct workqueue_struct *rescan_ctlr_wq;
wait_queue_head_t abort_cmd_wait_queue;
wait_queue_head_t event_sync_wait_queue;
struct mutex reset_mutex;
+ u8 reset_in_progress;
+ struct hpsa_sas_node *sas_host;
};
struct offline_device_entry {
#define HPSA_RESET_TYPE_BUS 0x01
#define HPSA_RESET_TYPE_TARGET 0x03
#define HPSA_RESET_TYPE_LUN 0x04
+#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
#define HPSA_MSG_SEND_RETRY_LIMIT 10
#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
#define IOACCEL2_INBOUND_POSTQ_64_LOW 0xd0
#define IOACCEL2_INBOUND_POSTQ_64_HI 0xd4
+#define HPSA_PHYSICAL_DEVICE_BUS 0
+#define HPSA_RAID_VOLUME_BUS 1
+#define HPSA_EXTERNAL_RAID_VOLUME_BUS 2
+#define HPSA_HBA_BUS 3
+
/*
Send the command to the hardware
*/
u8 wwid[8];
u8 device_type;
u8 device_flags;
-#define NON_DISK_PHYS_DEV(x) ((x)[17] & 0x01)
-#define PHYS_IOACCEL(x) ((x)[17] & 0x08)
u8 lun_count; /* multi-lun device, how many luns */
u8 redundant_paths;
u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
#define BMIC_FLASH_FIRMWARE 0xF7
#define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
#define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15
+#define BMIC_IDENTIFY_CONTROLLER 0x11
+#define BMIC_SET_DIAG_OPTIONS 0xF4
+#define BMIC_SENSE_DIAG_OPTIONS 0xF5
+#define HPSA_DIAG_OPTS_DISABLE_RLD_CACHING 0x40000000
+#define BMIC_SENSE_SUBSYSTEM_INFORMATION 0x66
/* Command List Structure */
union SCSI3Addr {
u32 board_id;
};
+struct bmic_identify_controller {
+ u8 configured_logical_drive_count; /* offset 0 */
+ u8 pad1[153];
+ __le16 extended_logical_unit_count; /* offset 154 */
+ u8 pad2[136];
+ u8 controller_mode; /* offset 292 */
+ u8 pad3[32];
+};
+
+
struct bmic_identify_physical_device {
u8 scsi_bus; /* SCSI Bus number on controller */
u8 scsi_id; /* SCSI ID on this bus */
u8 padding[112];
};
+struct bmic_sense_subsystem_info {
+ u8 primary_slot_number;
+ u8 reserved[3];
+ u8 chasis_serial_number[32];
+ u8 primary_world_wide_id[8];
+ u8 primary_array_serial_number[32]; /* NULL terminated */
+ u8 primary_cache_serial_number[32]; /* NULL terminated */
+ u8 reserved_2[8];
+ u8 secondary_array_serial_number[32];
+ u8 secondary_cache_serial_number[32];
+ u8 pad[332];
+};
+
#pragma pack()
#endif /* HPSA_CMD_H */
.max_sectors = IBMVFC_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = ibmvfc_attrs,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
MODULE_VERSION(IBMVSCSI_VERSION);
module_param_named(max_id, max_id, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(max_id, "Largest ID value for each channel");
+MODULE_PARM_DESC(max_id, "Largest ID value for each channel [Default=64]");
module_param_named(max_channel, max_channel, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(max_channel, "Largest channel value");
+MODULE_PARM_DESC(max_channel, "Largest channel value [Default=3]");
module_param_named(init_timeout, init_timeout, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds");
module_param_named(max_requests, max_requests, int, S_IRUGO);
goto init_pool_failed;
}
- host->max_lun = 8;
+ host->max_lun = IBMVSCSI_MAX_LUN;
host->max_id = max_id;
host->max_channel = max_channel;
host->max_cmd_len = 16;
+ dev_info(dev,
+ "Maximum ID: %d Maximum LUN: %llu Maximum Channel: %d\n",
+ host->max_id, host->max_lun, host->max_channel);
+
if (scsi_add_host(hostdata->host, hostdata->dev))
goto add_host_failed;
#define IBMVSCSI_CMDS_PER_LUN_DEFAULT 16
#define IBMVSCSI_MAX_SECTORS_DEFAULT 256 /* 32 * 8 = default max I/O 32 pages */
#define IBMVSCSI_MAX_CMDS_PER_LUN 64
+#define IBMVSCSI_MAX_LUN 32
/* ------------------------------------------------------------
* Data Structures
ipr_cmd->scsi_cmd = scsi_cmd;
ipr_cmd->done = ipr_scsi_eh_done;
- if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
+ if (ipr_is_gscsi(res)) {
if (scsi_cmd->underflow == 0)
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
- ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
- if (ipr_is_gscsi(res) && res->reset_occurred) {
+ if (res->reset_occurred) {
res->reset_occurred = 0;
ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
}
+ }
+
+ if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
+ ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
+
ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
if (scsi_cmd->flags & SCMD_TAGGED)
ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_SIMPLE_TASK;
.shost_attrs = ipr_ioa_attrs,
.sdev_attrs = ipr_dev_attrs,
.proc_name = IPR_NAME,
- .use_blk_tags = 1,
};
/**
return IPR_RC_JOB_RETURN;
}
+static int ipr_ioa_service_action_failed(struct ipr_cmnd *ipr_cmd)
+{
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
+
+ if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT)
+ return IPR_RC_JOB_CONTINUE;
+
+ return ipr_reset_cmd_failed(ipr_cmd);
+}
+
+static void ipr_build_ioa_service_action(struct ipr_cmnd *ipr_cmd,
+ __be32 res_handle, u8 sa_code)
+{
+ struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+
+ ioarcb->res_handle = res_handle;
+ ioarcb->cmd_pkt.cdb[0] = IPR_IOA_SERVICE_ACTION;
+ ioarcb->cmd_pkt.cdb[1] = sa_code;
+ ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
+}
+
+/**
+ * ipr_ioafp_set_caching_parameters - Issue Set Cache parameters service
+ * action
+ *
+ * Return value:
+ * none
+ **/
+static int ipr_ioafp_set_caching_parameters(struct ipr_cmnd *ipr_cmd)
+{
+ struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+ struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+ struct ipr_inquiry_pageC4 *pageC4 = &ioa_cfg->vpd_cbs->pageC4_data;
+
+ ENTER;
+
+ ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
+
+ if (pageC4->cache_cap[0] & IPR_CAP_SYNC_CACHE) {
+ ipr_build_ioa_service_action(ipr_cmd,
+ cpu_to_be32(IPR_IOA_RES_HANDLE),
+ IPR_IOA_SA_CHANGE_CACHE_PARAMS);
+
+ ioarcb->cmd_pkt.cdb[2] = 0x40;
+
+ ipr_cmd->job_step_failed = ipr_ioa_service_action_failed;
+ ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
+ IPR_SET_SUP_DEVICE_TIMEOUT);
+
+ LEAVE;
+ return IPR_RC_JOB_RETURN;
+ }
+
+ LEAVE;
+ return IPR_RC_JOB_CONTINUE;
+}
+
/**
* ipr_ioafp_inquiry - Send an Inquiry to the adapter.
* @ipr_cmd: ipr command struct
return 0;
}
+/**
+ * ipr_ioafp_pageC4_inquiry - Send a Page 0xC4 Inquiry to the adapter.
+ * @ipr_cmd: ipr command struct
+ *
+ * This function sends a Page 0xC4 inquiry to the adapter
+ * to retrieve software VPD information.
+ *
+ * Return value:
+ * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
+ **/
+static int ipr_ioafp_pageC4_inquiry(struct ipr_cmnd *ipr_cmd)
+{
+ struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+ struct ipr_inquiry_page0 *page0 = &ioa_cfg->vpd_cbs->page0_data;
+ struct ipr_inquiry_pageC4 *pageC4 = &ioa_cfg->vpd_cbs->pageC4_data;
+
+ ENTER;
+ ipr_cmd->job_step = ipr_ioafp_set_caching_parameters;
+ memset(pageC4, 0, sizeof(*pageC4));
+
+ if (ipr_inquiry_page_supported(page0, 0xC4)) {
+ ipr_ioafp_inquiry(ipr_cmd, 1, 0xC4,
+ (ioa_cfg->vpd_cbs_dma
+ + offsetof(struct ipr_misc_cbs,
+ pageC4_data)),
+ sizeof(struct ipr_inquiry_pageC4));
+ return IPR_RC_JOB_RETURN;
+ }
+
+ LEAVE;
+ return IPR_RC_JOB_CONTINUE;
+}
+
/**
* ipr_ioafp_cap_inquiry - Send a Page 0xD0 Inquiry to the adapter.
* @ipr_cmd: ipr command struct
struct ipr_inquiry_cap *cap = &ioa_cfg->vpd_cbs->cap;
ENTER;
- ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
+ ipr_cmd->job_step = ipr_ioafp_pageC4_inquiry;
memset(cap, 0, sizeof(*cap));
if (ipr_inquiry_page_supported(page0, 0xD0)) {
return IPR_RC_JOB_RETURN;
}
+static int ipr_dump_mailbox_wait(struct ipr_cmnd *ipr_cmd)
+{
+ struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+
+ ENTER;
+
+ if (ioa_cfg->sdt_state != GET_DUMP)
+ return IPR_RC_JOB_RETURN;
+
+ if (!ioa_cfg->sis64 || !ipr_cmd->u.time_left ||
+ (readl(ioa_cfg->regs.sense_interrupt_reg) &
+ IPR_PCII_MAILBOX_STABLE)) {
+
+ if (!ipr_cmd->u.time_left)
+ dev_err(&ioa_cfg->pdev->dev,
+ "Timed out waiting for Mailbox register.\n");
+
+ ioa_cfg->sdt_state = READ_DUMP;
+ ioa_cfg->dump_timeout = 0;
+ if (ioa_cfg->sis64)
+ ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
+ else
+ ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT);
+ ipr_cmd->job_step = ipr_reset_wait_for_dump;
+ schedule_work(&ioa_cfg->work_q);
+
+ } else {
+ ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
+ ipr_reset_start_timer(ipr_cmd,
+ IPR_CHECK_FOR_RESET_TIMEOUT);
+ }
+
+ LEAVE;
+ return IPR_RC_JOB_RETURN;
+}
+
/**
* ipr_reset_restore_cfg_space - Restore PCI config space.
* @ipr_cmd: ipr command struct
if (ioa_cfg->in_ioa_bringdown) {
ipr_cmd->job_step = ipr_ioa_bringdown_done;
+ } else if (ioa_cfg->sdt_state == GET_DUMP) {
+ ipr_cmd->job_step = ipr_dump_mailbox_wait;
+ ipr_cmd->u.time_left = IPR_WAIT_FOR_MAILBOX;
} else {
ipr_cmd->job_step = ipr_reset_enable_ioa;
-
- if (GET_DUMP == ioa_cfg->sdt_state) {
- ioa_cfg->sdt_state = READ_DUMP;
- ioa_cfg->dump_timeout = 0;
- if (ioa_cfg->sis64)
- ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
- else
- ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT);
- ipr_cmd->job_step = ipr_reset_wait_for_dump;
- schedule_work(&ioa_cfg->work_q);
- return IPR_RC_JOB_RETURN;
- }
}
LEAVE;
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.6.2"
-#define IPR_DRIVER_DATE "(June 11, 2015)"
+#define IPR_DRIVER_VERSION "2.6.3"
+#define IPR_DRIVER_DATE "(October 17, 2015)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
#define IPR_SET_ALL_SUPPORTED_DEVICES 0x80
#define IPR_IOA_SHUTDOWN 0xF7
#define IPR_WR_BUF_DOWNLOAD_AND_SAVE 0x05
+#define IPR_IOA_SERVICE_ACTION 0xD2
+
+/* IOA Service Actions */
+#define IPR_IOA_SA_CHANGE_CACHE_PARAMS 0x14
/*
* Timeouts
#define IPR_IPL_INIT_STAGE_TIME_MASK 0x0000ffff
#define IPR_PCII_IPL_STAGE_CHANGE (0x80000000 >> 0)
+#define IPR_PCII_MAILBOX_STABLE (0x80000000 >> 4)
+#define IPR_WAIT_FOR_MAILBOX (2 * HZ)
+
#define IPR_PCII_IOA_TRANS_TO_OPER (0x80000000 >> 0)
#define IPR_PCII_IOARCB_XFER_FAILED (0x80000000 >> 3)
#define IPR_PCII_IOA_UNIT_CHECKED (0x80000000 >> 4)
u8 page[IPR_INQUIRY_PAGE0_ENTRIES];
}__attribute__((packed));
+struct ipr_inquiry_pageC4 {
+ u8 peri_qual_dev_type;
+ u8 page_code;
+ u8 reserved1;
+ u8 len;
+ u8 cache_cap[4];
+#define IPR_CAP_SYNC_CACHE 0x08
+ u8 reserved2[20];
+} __packed;
+
struct ipr_hostrcb_device_data_entry {
struct ipr_vpd vpd;
struct ipr_res_addr dev_res_addr;
struct ipr_inquiry_page0 page0_data;
struct ipr_inquiry_page3 page3_data;
struct ipr_inquiry_cap cap;
+ struct ipr_inquiry_pageC4 pageC4_data;
struct ipr_mode_pages mode_pages;
struct ipr_supported_device supp_dev;
};
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = isci_host_attrs,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
if (!isci_host)
return;
+ shost = to_shost(isci_host);
+ scsi_remove_host(shost);
sas_unregister_ha(&isci_host->sas_ha);
- shost = to_shost(isci_host);
sas_remove_host(shost);
- scsi_remove_host(shost);
scsi_host_put(shost);
}
#include <linux/export.h>
/**
- * fc_vport_create() - Create a new NPIV vport instance
+ * libfc_vport_create() - Create a new NPIV vport instance
* @vport: fc_vport structure from scsi_transport_fc
* @privsize: driver private data size to allocate along with the Scsi_Host
*/
rjt_err = LSRJT_CMD_UNSUPPORTED;
goto rjt;
}
- lcb_context = kmalloc(sizeof(struct lpfc_lcb_context), GFP_KERNEL);
if (phba->hba_flag & HBA_FCOE_MODE) {
rjt_err = LSRJT_CMD_UNSUPPORTED;
goto rjt;
}
+ lcb_context = kmalloc(sizeof(*lcb_context), GFP_KERNEL);
+ if (!lcb_context) {
+ rjt_err = LSRJT_UNABLE_TPC;
+ goto rjt;
+ }
+
state = (beacon->lcb_sub_command == LPFC_LCB_ON) ? 1 : 0;
lcb_context->sub_command = beacon->lcb_sub_command;
lcb_context->type = beacon->lcb_type;
if (lpfc_sli4_set_beacon(vport, lcb_context, state)) {
lpfc_printf_vlog(ndlp->vport, KERN_ERR,
LOG_ELS, "0193 failed to send mail box");
+ kfree(lcb_context);
lpfc_nlp_put(ndlp);
rjt_err = LSRJT_UNABLE_TPC;
goto rjt;
.max_sectors = 0xFFFF,
.vendor_id = LPFC_NL_VENDOR_ID,
.change_queue_depth = scsi_change_queue_depth,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
.max_sectors = 0xFFFF,
.vendor_id = LPFC_NL_VENDOR_ID,
.change_queue_depth = scsi_change_queue_depth,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
.shost_attrs = lpfc_vport_attrs,
.max_sectors = 0xFFFF,
.change_queue_depth = scsi_change_queue_depth,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "06.807.10.00-rc1"
-#define MEGASAS_RELDATE "March 6, 2015"
+#define MEGASAS_VERSION "06.808.16.00-rc1"
+#define MEGASAS_RELDATE "Oct. 8, 2015"
/*
* Device IDs
#define PCI_DEVICE_ID_LSI_PLASMA 0x002f
#define PCI_DEVICE_ID_LSI_INVADER 0x005d
#define PCI_DEVICE_ID_LSI_FURY 0x005f
+#define PCI_DEVICE_ID_LSI_INTRUDER 0x00ce
+#define PCI_DEVICE_ID_LSI_INTRUDER_24 0x00cf
+#define PCI_DEVICE_ID_LSI_CUTLASS_52 0x0052
+#define PCI_DEVICE_ID_LSI_CUTLASS_53 0x0053
/*
* Intel HBA SSDIDs
#define MEGARAID_INTEL_RS3MC044_SSDID 0x9381
#define MEGARAID_INTEL_RS3WC080_SSDID 0x9341
#define MEGARAID_INTEL_RS3WC040_SSDID 0x9343
+#define MEGARAID_INTEL_RMS3BC160_SSDID 0x352B
+
+/*
+ * Intruder HBA SSDIDs
+ */
+#define MEGARAID_INTRUDER_SSDID1 0x9371
+#define MEGARAID_INTRUDER_SSDID2 0x9390
+#define MEGARAID_INTRUDER_SSDID3 0x9370
/*
* Intel HBA branding
"Intel(R) RAID Controller RS3WC080"
#define MEGARAID_INTEL_RS3WC040_BRANDING \
"Intel(R) RAID Controller RS3WC040"
+#define MEGARAID_INTEL_RMS3BC160_BRANDING \
+ "Intel(R) Integrated RAID Module RMS3BC160"
/*
* =====================================
MFI_STAT_INVALID_STATUS = 0xFF
};
+enum mfi_evt_class {
+ MFI_EVT_CLASS_DEBUG = -2,
+ MFI_EVT_CLASS_PROGRESS = -1,
+ MFI_EVT_CLASS_INFO = 0,
+ MFI_EVT_CLASS_WARNING = 1,
+ MFI_EVT_CLASS_CRITICAL = 2,
+ MFI_EVT_CLASS_FATAL = 3,
+ MFI_EVT_CLASS_DEAD = 4
+};
+
/*
* Crash dump related defines
*/
MR_EVT_ARGS_GENERIC,
};
+
+#define SGE_BUFFER_SIZE 4096
/*
* define constants for device list query options
*/
#define MR_EVT_FOREIGN_CFG_IMPORTED 0x00db
#define MR_EVT_LD_OFFLINE 0x00fc
#define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED 0x0152
+#define MR_EVT_CTRL_PROP_CHANGED 0x012f
enum MR_PD_STATE {
MR_PD_STATE_UNCONFIGURED_GOOD = 0x00,
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
- u32 reserved:12;
+ u32 reserved:7;
+ u32 useSeqNumJbodFP:1;
+ u32 supportExtendedSSCSize:1;
+ u32 supportDiskCacheSettingForSysPDs:1;
+ u32 supportCPLDUpdate:1;
+ u32 supportTTYLogCompression:1;
u32 discardCacheDuringLDDelete:1;
u32 supportSecurityonJBOD:1;
u32 supportCacheBypassModes:1;
u32 supportCacheBypassModes:1;
u32 supportSecurityonJBOD:1;
u32 discardCacheDuringLDDelete:1;
- u32 reserved:12;
+ u32 supportTTYLogCompression:1;
+ u32 supportCPLDUpdate:1;
+ u32 supportDiskCacheSettingForSysPDs:1;
+ u32 supportExtendedSSCSize:1;
+ u32 useSeqNumJbodFP:1;
+ u32 reserved:7;
#endif
} adapterOperations3;
typedef union _MFI_CAPABILITIES {
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
- u32 reserved:25;
+ u32 reserved:23;
+ u32 support_ext_io_size:1;
+ u32 support_ext_queue_depth:1;
u32 security_protocol_cmds_fw:1;
u32 support_core_affinity:1;
u32 support_ndrive_r1_lb:1;
u32 support_ndrive_r1_lb:1;
u32 support_core_affinity:1;
u32 security_protocol_cmds_fw:1;
- u32 reserved:25;
+ u32 support_ext_queue_depth:1;
+ u32 support_ext_io_size:1;
+ u32 reserved:23;
#endif
} mfi_capabilities;
__le32 reg;
u32 crash_dump_drv_support;
u32 crash_dump_app_support;
u32 secure_jbod_support;
+ bool use_seqnum_jbod_fp; /* Added for PD sequence */
spinlock_t crashdump_lock;
struct megasas_register_set __iomem *reg_set;
u8 UnevenSpanSupport;
u8 supportmax256vd;
+ u8 allow_fw_scan;
u16 fw_supported_vd_count;
u16 fw_supported_pd_count;
struct msix_entry msixentry[MEGASAS_MAX_MSIX_QUEUES];
struct megasas_irq_context irq_context[MEGASAS_MAX_MSIX_QUEUES];
u64 map_id;
+ u64 pd_seq_map_id;
struct megasas_cmd *map_update_cmd;
+ struct megasas_cmd *jbod_seq_cmd;
unsigned long bar;
long reset_flags;
struct mutex reset_mutex;
char mpio;
u16 throttlequeuedepth;
u8 mask_interrupts;
+ u16 max_chain_frame_sz;
u8 is_imr;
bool dev_handle;
};
void mr_update_load_balance_params(struct MR_DRV_RAID_MAP_ALL *map,
struct LD_LOAD_BALANCE_INFO *lbInfo);
int megasas_get_ctrl_info(struct megasas_instance *instance);
+/* PD sequence */
+int
+megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend);
int megasas_set_crash_dump_params(struct megasas_instance *instance,
u8 crash_buf_state);
void megasas_free_host_crash_buffer(struct megasas_instance *instance);
void megasas_return_mfi_mpt_pthr(struct megasas_instance *instance,
struct megasas_cmd *cmd_mfi, struct megasas_cmd_fusion *cmd_fusion);
int megasas_cmd_type(struct scsi_cmnd *cmd);
+void megasas_setup_jbod_map(struct megasas_instance *instance);
#endif /*LSI_MEGARAID_SAS_H */
/* Invader */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FURY)},
/* Fury */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INTRUDER)},
+ /* Intruder */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INTRUDER_24)},
+ /* Intruder 24 port*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_52)},
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_53)},
{}
};
}
+static const char *
+format_timestamp(uint32_t timestamp)
+{
+ static char buffer[32];
+
+ if ((timestamp & 0xff000000) == 0xff000000)
+ snprintf(buffer, sizeof(buffer), "boot + %us", timestamp &
+ 0x00ffffff);
+ else
+ snprintf(buffer, sizeof(buffer), "%us", timestamp);
+ return buffer;
+}
+
+static const char *
+format_class(int8_t class)
+{
+ static char buffer[6];
+
+ switch (class) {
+ case MFI_EVT_CLASS_DEBUG:
+ return "debug";
+ case MFI_EVT_CLASS_PROGRESS:
+ return "progress";
+ case MFI_EVT_CLASS_INFO:
+ return "info";
+ case MFI_EVT_CLASS_WARNING:
+ return "WARN";
+ case MFI_EVT_CLASS_CRITICAL:
+ return "CRIT";
+ case MFI_EVT_CLASS_FATAL:
+ return "FATAL";
+ case MFI_EVT_CLASS_DEAD:
+ return "DEAD";
+ default:
+ snprintf(buffer, sizeof(buffer), "%d", class);
+ return buffer;
+ }
+}
+
+/**
+ * megasas_decode_evt: Decode FW AEN event and print critical event
+ * for information.
+ * @instance: Adapter soft state
+ */
+static void
+megasas_decode_evt(struct megasas_instance *instance)
+{
+ struct megasas_evt_detail *evt_detail = instance->evt_detail;
+ union megasas_evt_class_locale class_locale;
+ class_locale.word = le32_to_cpu(evt_detail->cl.word);
+
+ if (class_locale.members.class >= MFI_EVT_CLASS_CRITICAL)
+ dev_info(&instance->pdev->dev, "%d (%s/0x%04x/%s) - %s\n",
+ le32_to_cpu(evt_detail->seq_num),
+ format_timestamp(le32_to_cpu(evt_detail->time_stamp)),
+ (class_locale.members.locale),
+ format_class(class_locale.members.class),
+ evt_detail->description);
+}
+
/**
* The following functions are defined for xscale
* (deviceid : 1064R, PERC5) controllers
return NULL;
}
+/*
+* megasas_set_dma_alignment - Set DMA alignment for PI enabled VD
+*
+* @sdev: OS provided scsi device
+*
+* Returns void
+*/
+static void megasas_set_dma_alignment(struct scsi_device *sdev)
+{
+ u32 device_id, ld;
+ struct megasas_instance *instance;
+ struct fusion_context *fusion;
+ struct MR_LD_RAID *raid;
+ struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
+
+ instance = megasas_lookup_instance(sdev->host->host_no);
+ fusion = instance->ctrl_context;
+
+ if (!fusion)
+ return;
+
+ if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) {
+ device_id = ((sdev->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL)
+ + sdev->id;
+ local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
+ ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
+ raid = MR_LdRaidGet(ld, local_map_ptr);
+
+ if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER)
+ blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
+ }
+}
+
static int megasas_slave_configure(struct scsi_device *sdev)
{
+ u16 pd_index = 0;
+ struct megasas_instance *instance;
+
+ instance = megasas_lookup_instance(sdev->host->host_no);
+ if (instance->allow_fw_scan) {
+ if (sdev->channel < MEGASAS_MAX_PD_CHANNELS &&
+ sdev->type == TYPE_DISK) {
+ pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
+ sdev->id;
+ if (instance->pd_list[pd_index].driveState !=
+ MR_PD_STATE_SYSTEM)
+ return -ENXIO;
+ }
+ }
+ megasas_set_dma_alignment(sdev);
/*
* The RAID firmware may require extended timeouts.
*/
pd_index =
(sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
sdev->id;
- if (instance->pd_list[pd_index].driveState ==
- MR_PD_STATE_SYSTEM) {
+ if ((instance->allow_fw_scan || instance->pd_list[pd_index].driveState ==
+ MR_PD_STATE_SYSTEM)) {
return 0;
}
return -ENXIO;
msleep(1000);
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ (instance->ctrl_context)) {
writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
/* Flush */
readl(&instance->reg_set->doorbell);
/*
* First wait for all commands to complete
*/
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+ if (instance->ctrl_context)
ret = megasas_reset_fusion(scmd->device->host, 1);
else
ret = megasas_generic_reset(scmd);
struct megasas_header *hdr = &cmd->frame->hdr;
unsigned long flags;
struct fusion_context *fusion = instance->ctrl_context;
- u32 opcode;
+ u32 opcode, status;
/* flag for the retry reset */
cmd->retry_for_fw_reset = 0;
&& (cmd->frame->dcmd.mbox.b[1] == 1)) {
fusion->fast_path_io = 0;
spin_lock_irqsave(instance->host->host_lock, flags);
+ instance->map_update_cmd = NULL;
if (cmd->frame->hdr.cmd_status != 0) {
if (cmd->frame->hdr.cmd_status !=
MFI_STAT_NOT_FOUND)
spin_unlock_irqrestore(&poll_aen_lock, flags);
}
+ /* FW has an updated PD sequence */
+ if ((opcode == MR_DCMD_SYSTEM_PD_MAP_GET_INFO) &&
+ (cmd->frame->dcmd.mbox.b[0] == 1)) {
+
+ spin_lock_irqsave(instance->host->host_lock, flags);
+ status = cmd->frame->hdr.cmd_status;
+ instance->jbod_seq_cmd = NULL;
+ megasas_return_cmd(instance, cmd);
+
+ if (status == MFI_STAT_OK) {
+ instance->pd_seq_map_id++;
+ /* Re-register a pd sync seq num cmd */
+ if (megasas_sync_pd_seq_num(instance, true))
+ instance->use_seqnum_jbod_fp = false;
+ } else
+ instance->use_seqnum_jbod_fp = false;
+
+ spin_unlock_irqrestore(instance->host->host_lock, flags);
+ break;
+ }
+
/*
* See if got an event notification
*/
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FURY)) {
+ (instance->ctrl_context))
writel(
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
&instance->reg_set->doorbell);
- } else {
+ else
writel(
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
&instance->reg_set->inbound_doorbell);
- }
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_WAIT_HANDSHAKE;
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FURY)) {
+ (instance->ctrl_context))
writel(MFI_INIT_HOTPLUG,
&instance->reg_set->doorbell);
- } else
+ else
writel(MFI_INIT_HOTPLUG,
&instance->reg_set->inbound_doorbell);
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->pdev->device
- == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device
- == PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device
- == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device
- == PCI_DEVICE_ID_LSI_FURY)) {
+ (instance->ctrl_context)) {
writel(MFI_RESET_FLAGS,
&instance->reg_set->doorbell);
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FURY)) {
+
+ if (instance->ctrl_context) {
for (i = 0; i < (10 * 1000); i += 20) {
if (readl(
&instance->
memset(cmd->frame, 0, total_sz);
cmd->frame->io.context = cpu_to_le32(cmd->index);
cmd->frame->io.pad_0 = 0;
- if ((instance->pdev->device != PCI_DEVICE_ID_LSI_FUSION) &&
- (instance->pdev->device != PCI_DEVICE_ID_LSI_PLASMA) &&
- (instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER) &&
- (instance->pdev->device != PCI_DEVICE_ID_LSI_FURY) &&
- (reset_devices))
+ if (!instance->ctrl_context && reset_devices)
cmd->frame->hdr.cmd = MFI_CMD_INVALID;
}
le32_to_cpus((u32 *)&ctrl_info->adapterOperations2);
le32_to_cpus((u32 *)&ctrl_info->adapterOperations3);
megasas_update_ext_vd_details(instance);
+ instance->use_seqnum_jbod_fp =
+ ctrl_info->adapterOperations3.useSeqNumJbodFP;
instance->is_imr = (ctrl_info->memory_size ? 0 : 1);
dev_info(&instance->pdev->dev,
"controller type\t: %s(%dMB)\n",
instance->is_imr ? "iMR" : "MR",
le16_to_cpu(ctrl_info->memory_size));
+ instance->disableOnlineCtrlReset =
+ ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
+ dev_info(&instance->pdev->dev, "Online Controller Reset(OCR)\t: %s\n",
+ instance->disableOnlineCtrlReset ? "Disabled" : "Enabled");
+ instance->secure_jbod_support =
+ ctrl_info->adapterOperations3.supportSecurityonJBOD;
+ dev_info(&instance->pdev->dev, "Secure JBOD support\t: %s\n",
+ instance->secure_jbod_support ? "Yes" : "No");
}
pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info),
free_irq(instance->pdev->irq, &instance->irq_context[0]);
}
+/**
+ * megasas_setup_jbod_map - setup jbod map for FP seq_number.
+ * @instance: Adapter soft state
+ * @is_probe: Driver probe check
+ *
+ * Return 0 on success.
+ */
+void
+megasas_setup_jbod_map(struct megasas_instance *instance)
+{
+ int i;
+ struct fusion_context *fusion = instance->ctrl_context;
+ u32 pd_seq_map_sz;
+
+ pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
+ (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1));
+
+ if (reset_devices || !fusion ||
+ !instance->ctrl_info->adapterOperations3.useSeqNumJbodFP) {
+ dev_info(&instance->pdev->dev,
+ "Jbod map is not supported %s %d\n",
+ __func__, __LINE__);
+ instance->use_seqnum_jbod_fp = false;
+ return;
+ }
+
+ if (fusion->pd_seq_sync[0])
+ goto skip_alloc;
+
+ for (i = 0; i < JBOD_MAPS_COUNT; i++) {
+ fusion->pd_seq_sync[i] = dma_alloc_coherent
+ (&instance->pdev->dev, pd_seq_map_sz,
+ &fusion->pd_seq_phys[i], GFP_KERNEL);
+ if (!fusion->pd_seq_sync[i]) {
+ dev_err(&instance->pdev->dev,
+ "Failed to allocate memory from %s %d\n",
+ __func__, __LINE__);
+ if (i == 1) {
+ dma_free_coherent(&instance->pdev->dev,
+ pd_seq_map_sz, fusion->pd_seq_sync[0],
+ fusion->pd_seq_phys[0]);
+ fusion->pd_seq_sync[0] = NULL;
+ }
+ instance->use_seqnum_jbod_fp = false;
+ return;
+ }
+ }
+
+skip_alloc:
+ if (!megasas_sync_pd_seq_num(instance, false) &&
+ !megasas_sync_pd_seq_num(instance, true))
+ instance->use_seqnum_jbod_fp = true;
+ else
+ instance->use_seqnum_jbod_fp = false;
+}
+
/**
* megasas_init_fw - Initializes the FW
* @instance: Adapter soft state
unsigned long bar_list;
int i, loop, fw_msix_count = 0;
struct IOV_111 *iovPtr;
+ struct fusion_context *fusion;
+
+ fusion = instance->ctrl_context;
/* Find first memory bar */
bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
case PCI_DEVICE_ID_LSI_PLASMA:
case PCI_DEVICE_ID_LSI_INVADER:
case PCI_DEVICE_ID_LSI_FURY:
+ case PCI_DEVICE_ID_LSI_INTRUDER:
+ case PCI_DEVICE_ID_LSI_INTRUDER_24:
+ case PCI_DEVICE_ID_LSI_CUTLASS_52:
+ case PCI_DEVICE_ID_LSI_CUTLASS_53:
instance->instancet = &megasas_instance_template_fusion;
break;
case PCI_DEVICE_ID_LSI_SAS1078R:
case PCI_DEVICE_ID_DELL_PERC5:
default:
instance->instancet = &megasas_instance_template_xscale;
+ instance->allow_fw_scan = 1;
break;
}
scratch_pad_2 = readl
(&instance->reg_set->outbound_scratch_pad_2);
/* Check max MSI-X vectors */
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA)) {
- instance->msix_vectors = (scratch_pad_2
- & MR_MAX_REPLY_QUEUES_OFFSET) + 1;
- fw_msix_count = instance->msix_vectors;
- if (msix_vectors)
- instance->msix_vectors =
- min(msix_vectors,
- instance->msix_vectors);
- } else if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER)
- || (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
- /* Invader/Fury supports more than 8 MSI-X */
- instance->msix_vectors = ((scratch_pad_2
- & MR_MAX_REPLY_QUEUES_EXT_OFFSET)
- >> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1;
- fw_msix_count = instance->msix_vectors;
- /* Save 1-15 reply post index address to local memory
- * Index 0 is already saved from reg offset
- * MPI2_REPLY_POST_HOST_INDEX_OFFSET
- */
- for (loop = 1; loop < MR_MAX_MSIX_REG_ARRAY; loop++) {
- instance->reply_post_host_index_addr[loop] =
- (u32 __iomem *)
- ((u8 __iomem *)instance->reg_set +
- MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET
- + (loop * 0x10));
+ if (fusion) {
+ if (fusion->adapter_type == THUNDERBOLT_SERIES) { /* Thunderbolt Series*/
+ instance->msix_vectors = (scratch_pad_2
+ & MR_MAX_REPLY_QUEUES_OFFSET) + 1;
+ fw_msix_count = instance->msix_vectors;
+ } else { /* Invader series supports more than 8 MSI-x vectors*/
+ instance->msix_vectors = ((scratch_pad_2
+ & MR_MAX_REPLY_QUEUES_EXT_OFFSET)
+ >> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1;
+ fw_msix_count = instance->msix_vectors;
+ /* Save 1-15 reply post index address to local memory
+ * Index 0 is already saved from reg offset
+ * MPI2_REPLY_POST_HOST_INDEX_OFFSET
+ */
+ for (loop = 1; loop < MR_MAX_MSIX_REG_ARRAY; loop++) {
+ instance->reply_post_host_index_addr[loop] =
+ (u32 __iomem *)
+ ((u8 __iomem *)instance->reg_set +
+ MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET
+ + (loop * 0x10));
+ }
}
if (msix_vectors)
instance->msix_vectors = min(msix_vectors,
instance->msix_vectors);
- } else
+ } else /* MFI adapters */
instance->msix_vectors = 1;
/* Don't bother allocating more MSI-X vectors than cpus */
instance->msix_vectors = min(instance->msix_vectors,
"current msix/online cpus\t: (%d/%d)\n",
instance->msix_vectors, (unsigned int)num_online_cpus());
+ tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
+ (unsigned long)instance);
+
if (instance->msix_vectors ?
megasas_setup_irqs_msix(instance, 1) :
megasas_setup_irqs_ioapic(instance))
if (instance->instancet->init_adapter(instance))
goto fail_init_adapter;
- tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
- (unsigned long)instance);
instance->instancet->enable_intr(instance);
dev_err(&instance->pdev->dev, "INIT adapter done\n");
+ megasas_setup_jbod_map(instance);
+
/** for passthrough
* the following function will get the PD LIST.
*/
tmp_sectors = min_t(u32, max_sectors_1, max_sectors_2);
- instance->disableOnlineCtrlReset =
- ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
instance->mpio = ctrl_info->adapterOperations2.mpio;
instance->UnevenSpanSupport =
ctrl_info->adapterOperations2.supportUnevenSpans;
}
if (ctrl_info->host_interface.SRIOV) {
- if (!ctrl_info->adapterOperations2.activePassive)
- instance->PlasmaFW111 = 1;
-
- if (!instance->PlasmaFW111)
- instance->requestorId =
- ctrl_info->iov.requestorId;
- else {
- iovPtr = (struct IOV_111 *)((unsigned char *)ctrl_info + IOV_111_OFFSET);
- instance->requestorId = iovPtr->requestorId;
+ instance->requestorId = ctrl_info->iov.requestorId;
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) {
+ if (!ctrl_info->adapterOperations2.activePassive)
+ instance->PlasmaFW111 = 1;
+
+ dev_info(&instance->pdev->dev, "SR-IOV: firmware type: %s\n",
+ instance->PlasmaFW111 ? "1.11" : "new");
+
+ if (instance->PlasmaFW111) {
+ iovPtr = (struct IOV_111 *)
+ ((unsigned char *)ctrl_info + IOV_111_OFFSET);
+ instance->requestorId = iovPtr->requestorId;
+ }
}
- dev_warn(&instance->pdev->dev, "I am VF "
- "requestorId %d\n", instance->requestorId);
+ dev_info(&instance->pdev->dev, "SRIOV: VF requestorId %d\n",
+ instance->requestorId);
}
instance->crash_dump_fw_support =
instance->crash_dump_buf = NULL;
}
- instance->secure_jbod_support =
- ctrl_info->adapterOperations3.supportSecurityonJBOD;
dev_info(&instance->pdev->dev,
"pci id\t\t: (0x%04x)/(0x%04x)/(0x%04x)/(0x%04x)\n",
le16_to_cpu(ctrl_info->pci.sub_device_id));
dev_info(&instance->pdev->dev, "unevenspan support : %s\n",
instance->UnevenSpanSupport ? "yes" : "no");
- dev_info(&instance->pdev->dev, "disable ocr : %s\n",
- instance->disableOnlineCtrlReset ? "yes" : "no");
dev_info(&instance->pdev->dev, "firmware crash dump : %s\n",
instance->crash_dump_drv_support ? "yes" : "no");
- dev_info(&instance->pdev->dev, "secure jbod : %s\n",
- instance->secure_jbod_support ? "yes" : "no");
+ dev_info(&instance->pdev->dev, "jbod sync map : %s\n",
+ instance->use_seqnum_jbod_fp ? "yes" : "no");
instance->max_sectors_per_req = instance->max_num_sge *
- PAGE_SIZE / 512;
+ SGE_BUFFER_SIZE / 512;
if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
instance->max_sectors_per_req = tmp_sectors;
static int megasas_io_attach(struct megasas_instance *instance)
{
struct Scsi_Host *host = instance->host;
- u32 error;
/*
* Export parameters required by SCSI mid-layer
host->max_cmd_len = 16;
/* Fusion only supports host reset */
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ if (instance->ctrl_context) {
host->hostt->eh_device_reset_handler = NULL;
host->hostt->eh_bus_reset_handler = NULL;
}
- error = scsi_init_shared_tag_map(host, host->can_queue);
- if (error) {
- dev_err(&instance->pdev->dev,
- "Failed to shared tag from %s %d\n",
- __func__, __LINE__);
- return -ENODEV;
- }
/*
* Notify the mid-layer about the new controller
case PCI_DEVICE_ID_LSI_PLASMA:
case PCI_DEVICE_ID_LSI_INVADER:
case PCI_DEVICE_ID_LSI_FURY:
+ case PCI_DEVICE_ID_LSI_INTRUDER:
+ case PCI_DEVICE_ID_LSI_INTRUDER_24:
+ case PCI_DEVICE_ID_LSI_CUTLASS_52:
+ case PCI_DEVICE_ID_LSI_CUTLASS_53:
{
instance->ctrl_context_pages =
get_order(sizeof(struct fusion_context));
fusion = instance->ctrl_context;
memset(fusion, 0,
((1 << PAGE_SHIFT) << instance->ctrl_context_pages));
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA))
+ fusion->adapter_type = THUNDERBOLT_SERIES;
+ else
+ fusion->adapter_type = INVADER_SERIES;
}
break;
default: /* For all other supported controllers */
instance->disableOnlineCtrlReset = 1;
instance->UnevenSpanSupport = 0;
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ if (instance->ctrl_context) {
INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
INIT_WORK(&instance->crash_init, megasas_fusion_crash_dump_wq);
} else
instance->instancet->disable_intr(instance);
megasas_destroy_irqs(instance);
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+ if (instance->ctrl_context)
megasas_release_fusion(instance);
else
megasas_release_mfi(instance);
if (instance->aen_cmd)
megasas_issue_blocked_abort_cmd(instance,
- instance->aen_cmd, 30);
+ instance->aen_cmd, MEGASAS_BLOCKED_CMD_TIMEOUT);
if (instance->map_update_cmd)
megasas_issue_blocked_abort_cmd(instance,
- instance->map_update_cmd, 30);
+ instance->map_update_cmd, MEGASAS_BLOCKED_CMD_TIMEOUT);
+ if (instance->jbod_seq_cmd)
+ megasas_issue_blocked_abort_cmd(instance,
+ instance->jbod_seq_cmd, MEGASAS_BLOCKED_CMD_TIMEOUT);
+
dcmd = &cmd->frame->dcmd;
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
instance->msix_vectors))
goto fail_reenable_msix;
- switch (instance->pdev->device) {
- case PCI_DEVICE_ID_LSI_FUSION:
- case PCI_DEVICE_ID_LSI_PLASMA:
- case PCI_DEVICE_ID_LSI_INVADER:
- case PCI_DEVICE_ID_LSI_FURY:
- {
+ if (instance->ctrl_context) {
megasas_reset_reply_desc(instance);
if (megasas_ioc_init_fusion(instance)) {
megasas_free_cmds(instance);
}
if (!megasas_get_map_info(instance))
megasas_sync_map_info(instance);
- }
- break;
- default:
+ } else {
*instance->producer = 0;
*instance->consumer = 0;
if (megasas_issue_init_mfi(instance))
goto fail_init_mfi;
- break;
}
tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
}
instance->instancet->enable_intr(instance);
+ megasas_setup_jbod_map(instance);
instance->unload = 0;
/*
struct Scsi_Host *host;
struct megasas_instance *instance;
struct fusion_context *fusion;
+ u32 pd_seq_map_sz;
instance = pci_get_drvdata(pdev);
instance->unload = 1;
if (instance->msix_vectors)
pci_disable_msix(instance->pdev);
- switch (instance->pdev->device) {
- case PCI_DEVICE_ID_LSI_FUSION:
- case PCI_DEVICE_ID_LSI_PLASMA:
- case PCI_DEVICE_ID_LSI_INVADER:
- case PCI_DEVICE_ID_LSI_FURY:
+ if (instance->ctrl_context) {
megasas_release_fusion(instance);
+ pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
+ (sizeof(struct MR_PD_CFG_SEQ) *
+ (MAX_PHYSICAL_DEVICES - 1));
for (i = 0; i < 2 ; i++) {
if (fusion->ld_map[i])
dma_free_coherent(&instance->pdev->dev,
if (fusion->ld_drv_map[i])
free_pages((ulong)fusion->ld_drv_map[i],
fusion->drv_map_pages);
+ if (fusion->pd_seq_sync)
+ dma_free_coherent(&instance->pdev->dev,
+ pd_seq_map_sz,
+ fusion->pd_seq_sync[i],
+ fusion->pd_seq_phys[i]);
}
free_pages((ulong)instance->ctrl_context,
instance->ctrl_context_pages);
- break;
- default:
+ } else {
megasas_release_mfi(instance);
pci_free_consistent(pdev, sizeof(u32),
instance->producer,
pci_free_consistent(pdev, sizeof(u32),
instance->consumer,
instance->consumer_h);
- break;
}
kfree(instance->ctrl_info);
int i;
int error = 0;
compat_uptr_t ptr;
+ unsigned long local_raw_ptr;
+ u32 local_sense_off;
+ u32 local_sense_len;
if (clear_user(ioc, sizeof(*ioc)))
return -EFAULT;
* sense_len is not null, so prepare the 64bit value under
* the same condition.
*/
- if (ioc->sense_len) {
+ if (get_user(local_raw_ptr, ioc->frame.raw) ||
+ get_user(local_sense_off, &ioc->sense_off) ||
+ get_user(local_sense_len, &ioc->sense_len))
+ return -EFAULT;
+
+
+ if (local_sense_len) {
void __user **sense_ioc_ptr =
- (void __user **)(ioc->frame.raw + ioc->sense_off);
+ (void __user **)((u8*)local_raw_ptr + local_sense_off);
compat_uptr_t *sense_cioc_ptr =
(compat_uptr_t *)(cioc->frame.raw + cioc->sense_off);
if (get_user(ptr, sense_cioc_ptr) ||
instance->ev = NULL;
host = instance->host;
if (instance->evt_detail) {
+ megasas_decode_evt(instance);
switch (le32_to_cpu(instance->evt_detail->code)) {
case MR_EVT_PD_INSERTED:
case MR_EVT_CFG_CLEARED:
case MR_EVT_LD_DELETED:
if (!instance->requestorId ||
- (instance->requestorId &&
- megasas_get_ld_vf_affiliation(instance, 0))) {
+ megasas_get_ld_vf_affiliation(instance, 0)) {
if (megasas_ld_list_query(instance,
MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
megasas_get_ld_list(instance);
break;
case MR_EVT_LD_CREATED:
if (!instance->requestorId ||
- (instance->requestorId &&
- megasas_get_ld_vf_affiliation(instance, 0))) {
+ megasas_get_ld_vf_affiliation(instance, 0)) {
if (megasas_ld_list_query(instance,
MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
megasas_get_ld_list(instance);
case MR_EVT_LD_STATE_CHANGE:
doscan = 1;
break;
+ case MR_EVT_CTRL_PROP_CHANGED:
+ megasas_get_ctrl_info(instance);
+ break;
default:
doscan = 0;
break;
}
if (!instance->requestorId ||
- (instance->requestorId &&
- megasas_get_ld_vf_affiliation(instance, 0))) {
+ megasas_get_ld_vf_affiliation(instance, 0)) {
if (megasas_ld_list_query(instance,
MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
megasas_get_ld_list(instance);
u8 physArm, span;
u64 row;
u8 retval = TRUE;
- u8 do_invader = 0;
u64 *pdBlock = &io_info->pdBlock;
__le16 *pDevHandle = &io_info->devHandle;
u32 logArm, rowMod, armQ, arm;
+ struct fusion_context *fusion;
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER ||
- instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
- do_invader = 1;
+ fusion = instance->ctrl_context;
/*Get row and span from io_info for Uneven Span IO.*/
row = io_info->start_row;
else {
*pDevHandle = cpu_to_le16(MR_PD_INVALID);
if ((raid->level >= 5) &&
- (!do_invader || (do_invader &&
+ ((fusion->adapter_type == THUNDERBOLT_SERIES) ||
+ ((fusion->adapter_type == INVADER_SERIES) &&
(raid->regTypeReqOnRead != REGION_TYPE_UNUSED))))
pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
else if (raid->level == 1) {
u8 physArm, span;
u64 row;
u8 retval = TRUE;
- u8 do_invader = 0;
u64 *pdBlock = &io_info->pdBlock;
__le16 *pDevHandle = &io_info->devHandle;
+ struct fusion_context *fusion;
+
+ fusion = instance->ctrl_context;
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER ||
- instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
- do_invader = 1;
row = mega_div64_32(stripRow, raid->rowDataSize);
/* set dev handle as invalid. */
*pDevHandle = cpu_to_le16(MR_PD_INVALID);
if ((raid->level >= 5) &&
- (!do_invader || (do_invader &&
+ ((fusion->adapter_type == THUNDERBOLT_SERIES) ||
+ ((fusion->adapter_type == INVADER_SERIES) &&
(raid->regTypeReqOnRead != REGION_TYPE_UNUSED))))
pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
else if (raid->level == 1) {
struct RAID_CONTEXT *pRAID_Context,
struct MR_DRV_RAID_MAP_ALL *map, u8 **raidLUN)
{
+ struct fusion_context *fusion;
struct MR_LD_RAID *raid;
u32 ld, stripSize, stripe_mask;
u64 endLba, endStrip, endRow, start_row, start_strip;
isRead = io_info->isRead;
io_info->IoforUnevenSpan = 0;
io_info->start_span = SPAN_INVALID;
+ fusion = instance->ctrl_context;
ld = MR_TargetIdToLdGet(ldTgtId, map);
raid = MR_LdRaidGet(ld, map);
cpu_to_le16(raid->fpIoTimeoutForLd ?
raid->fpIoTimeoutForLd :
map->raidMap.fpPdIoTimeoutSec);
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+ if (fusion->adapter_type == INVADER_SERIES)
pRAID_Context->regLockFlags = (isRead) ?
raid->regTypeReqOnRead : raid->regTypeReqOnWrite;
else
span_row_width +=
MR_LdSpanPtrGet
(ld, count, map)->spanRowDataSize;
- printk(KERN_INFO "megasas:"
- "span %x rowDataSize %x\n",
- count, MR_LdSpanPtrGet
- (ld, count, map)->spanRowDataSize);
}
}
u32 max_cmd;
struct fusion_context *fusion;
struct megasas_cmd_fusion *cmd;
- u32 total_sz_chain_frame;
fusion = instance->ctrl_context;
max_cmd = instance->max_fw_cmds;
- total_sz_chain_frame = MEGASAS_MAX_SZ_CHAIN_FRAME;
/*
* Use DMA pool facility provided by PCI layer
*/
- fusion->sg_dma_pool = pci_pool_create("megasas sg pool fusion",
- instance->pdev,
- total_sz_chain_frame, 4,
- 0);
+ fusion->sg_dma_pool = pci_pool_create("sg_pool_fusion", instance->pdev,
+ instance->max_chain_frame_sz,
+ 4, 0);
if (!fusion->sg_dma_pool) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "failed to setup request pool fusion\n");
return -ENOMEM;
}
- fusion->sense_dma_pool = pci_pool_create("megasas sense pool fusion",
+ fusion->sense_dma_pool = pci_pool_create("sense pool fusion",
instance->pdev,
SCSI_SENSE_BUFFERSIZE, 64, 0);
int i;
struct megasas_header *frame_hdr;
const char *sys_info;
+ MFI_CAPABILITIES *drv_ops;
fusion = instance->ctrl_context;
init_frame->cmd = MFI_CMD_INIT;
init_frame->cmd_status = 0xFF;
+ drv_ops = (MFI_CAPABILITIES *) &(init_frame->driver_operations);
+
/* driver support Extended MSIX */
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
- init_frame->driver_operations.
- mfi_capabilities.support_additional_msix = 1;
+ if (fusion->adapter_type == INVADER_SERIES)
+ drv_ops->mfi_capabilities.support_additional_msix = 1;
/* driver supports HA / Remote LUN over Fast Path interface */
- init_frame->driver_operations.mfi_capabilities.support_fp_remote_lun
- = 1;
- init_frame->driver_operations.mfi_capabilities.support_max_255lds
- = 1;
- init_frame->driver_operations.mfi_capabilities.support_ndrive_r1_lb
- = 1;
- init_frame->driver_operations.mfi_capabilities.security_protocol_cmds_fw
- = 1;
+ drv_ops->mfi_capabilities.support_fp_remote_lun = 1;
+
+ drv_ops->mfi_capabilities.support_max_255lds = 1;
+ drv_ops->mfi_capabilities.support_ndrive_r1_lb = 1;
+ drv_ops->mfi_capabilities.security_protocol_cmds_fw = 1;
+
+ if (instance->max_chain_frame_sz > MEGASAS_CHAIN_FRAME_SZ_MIN)
+ drv_ops->mfi_capabilities.support_ext_io_size = 1;
+
/* Convert capability to LE32 */
cpu_to_le32s((u32 *)&init_frame->driver_operations.mfi_capabilities);
return ret;
}
+/**
+ * megasas_sync_pd_seq_num - JBOD SEQ MAP
+ * @instance: Adapter soft state
+ * @pend: set to 1, if it is pended jbod map.
+ *
+ * Issue Jbod map to the firmware. If it is pended command,
+ * issue command and return. If it is first instance of jbod map
+ * issue and receive command.
+ */
+int
+megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend) {
+ int ret = 0;
+ u32 pd_seq_map_sz;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct fusion_context *fusion = instance->ctrl_context;
+ struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
+ dma_addr_t pd_seq_h;
+
+ pd_sync = (void *)fusion->pd_seq_sync[(instance->pd_seq_map_id & 1)];
+ pd_seq_h = fusion->pd_seq_phys[(instance->pd_seq_map_id & 1)];
+ pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
+ (sizeof(struct MR_PD_CFG_SEQ) *
+ (MAX_PHYSICAL_DEVICES - 1));
+
+ cmd = megasas_get_cmd(instance);
+ if (!cmd) {
+ dev_err(&instance->pdev->dev,
+ "Could not get mfi cmd. Fail from %s %d\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ memset(pd_sync, 0, pd_seq_map_sz);
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
+ dcmd->data_xfer_len = cpu_to_le32(pd_seq_map_sz);
+ dcmd->opcode = cpu_to_le32(MR_DCMD_SYSTEM_PD_MAP_GET_INFO);
+ dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(pd_seq_h);
+ dcmd->sgl.sge32[0].length = cpu_to_le32(pd_seq_map_sz);
+
+ if (pend) {
+ dcmd->mbox.b[0] = MEGASAS_DCMD_MBOX_PEND_FLAG;
+ dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_WRITE);
+ instance->jbod_seq_cmd = cmd;
+ instance->instancet->issue_dcmd(instance, cmd);
+ return 0;
+ }
+
+ dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+
+ /* Below code is only for non pended DCMD */
+ if (instance->ctrl_context && !instance->mask_interrupts)
+ ret = megasas_issue_blocked_cmd(instance, cmd, 60);
+ else
+ ret = megasas_issue_polled(instance, cmd);
+
+ if (le32_to_cpu(pd_sync->count) > MAX_PHYSICAL_DEVICES) {
+ dev_warn(&instance->pdev->dev,
+ "driver supports max %d JBOD, but FW reports %d\n",
+ MAX_PHYSICAL_DEVICES, le32_to_cpu(pd_sync->count));
+ ret = -EINVAL;
+ }
+
+ if (!ret)
+ instance->pd_seq_map_id++;
+
+ megasas_return_cmd(instance, cmd);
+ return ret;
+}
+
/*
* megasas_get_ld_map_info - Returns FW's ld_map structure
* @instance: Adapter soft state
break;
}
break;
+ case PCI_DEVICE_ID_LSI_CUTLASS_52:
+ case PCI_DEVICE_ID_LSI_CUTLASS_53:
+ switch (instance->pdev->subsystem_device) {
+ case MEGARAID_INTEL_RMS3BC160_SSDID:
+ dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
+ instance->host->host_no,
+ MEGARAID_INTEL_RMS3BC160_BRANDING);
+ break;
+ default:
+ break;
+ }
+ break;
default:
break;
}
{
struct megasas_register_set __iomem *reg_set;
struct fusion_context *fusion;
- u32 max_cmd;
+ u32 max_cmd, scratch_pad_2;
int i = 0, count;
fusion = instance->ctrl_context;
(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE *
(max_cmd + 1)); /* Extra 1 for SMID 0 */
+ scratch_pad_2 = readl(&instance->reg_set->outbound_scratch_pad_2);
+ /* If scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK is set,
+ * Firmware support extended IO chain frame which is 4 times more than
+ * legacy Firmware.
+ * Legacy Firmware - Frame size is (8 * 128) = 1K
+ * 1M IO Firmware - Frame size is (8 * 128 * 4) = 4K
+ */
+ if (scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK)
+ instance->max_chain_frame_sz =
+ ((scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_MASK) >>
+ MEGASAS_MAX_CHAIN_SHIFT) * MEGASAS_1MB_IO;
+ else
+ instance->max_chain_frame_sz =
+ ((scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_MASK) >>
+ MEGASAS_MAX_CHAIN_SHIFT) * MEGASAS_256K_IO;
+
+ if (instance->max_chain_frame_sz < MEGASAS_CHAIN_FRAME_SZ_MIN) {
+ dev_warn(&instance->pdev->dev, "frame size %d invalid, fall back to legacy max frame size %d\n",
+ instance->max_chain_frame_sz,
+ MEGASAS_CHAIN_FRAME_SZ_MIN);
+ instance->max_chain_frame_sz = MEGASAS_CHAIN_FRAME_SZ_MIN;
+ }
+
fusion->max_sge_in_main_msg =
- (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
- offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL))/16;
+ (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE
+ - offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL))/16;
fusion->max_sge_in_chain =
- MEGASAS_MAX_SZ_CHAIN_FRAME / sizeof(union MPI2_SGE_IO_UNION);
+ instance->max_chain_frame_sz
+ / sizeof(union MPI2_SGE_IO_UNION);
- instance->max_num_sge = rounddown_pow_of_two(
- fusion->max_sge_in_main_msg + fusion->max_sge_in_chain - 2);
+ instance->max_num_sge =
+ rounddown_pow_of_two(fusion->max_sge_in_main_msg
+ + fusion->max_sge_in_chain - 2);
/* Used for pass thru MFI frame (DCMD) */
fusion->chain_offset_mfi_pthru =
fusion = instance->ctrl_context;
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ if (fusion->adapter_type == INVADER_SERIES) {
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end = sgl_ptr;
sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
sgl_ptr_end->Flags = 0;
sgl_ptr->Length = cpu_to_le32(sg_dma_len(os_sgl));
sgl_ptr->Address = cpu_to_le64(sg_dma_address(os_sgl));
sgl_ptr->Flags = 0;
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ if (fusion->adapter_type == INVADER_SERIES)
if (i == sge_count - 1)
sgl_ptr->Flags = IEEE_SGE_FLAGS_END_OF_LIST;
- }
sgl_ptr++;
sg_processed = i + 1;
(sge_count > fusion->max_sge_in_main_msg)) {
struct MPI25_IEEE_SGE_CHAIN64 *sg_chain;
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FURY)) {
+ if (fusion->adapter_type == INVADER_SERIES) {
if ((le16_to_cpu(cmd->io_request->IoFlags) &
MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) !=
MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH)
sg_chain = sgl_ptr;
/* Prepare chain element */
sg_chain->NextChainOffset = 0;
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FURY))
+ if (fusion->adapter_type == INVADER_SERIES)
sg_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT;
else
sg_chain->Flags =
sgl_ptr =
(struct MPI25_IEEE_SGE_CHAIN64 *)cmd->sg_frame;
- memset(sgl_ptr, 0, MEGASAS_MAX_SZ_CHAIN_FRAME);
+ memset(sgl_ptr, 0, instance->max_chain_frame_sz);
}
}
cmd->request_desc->SCSIIO.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
<< MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ if (fusion->adapter_type == INVADER_SERIES) {
if (io_request->RaidContext.regLockFlags ==
REGION_TYPE_UNUSED)
cmd->request_desc->SCSIIO.RequestFlags =
scp->SCp.Status &= ~MEGASAS_LOAD_BALANCE_FLAG;
if ((raidLUN[0] == 1) &&
- (local_map_ptr->raidMap.devHndlInfo[io_info.pd_after_lb].validHandles > 2)) {
+ (local_map_ptr->raidMap.devHndlInfo[io_info.pd_after_lb].validHandles > 1)) {
instance->dev_handle = !(instance->dev_handle);
io_info.devHandle =
local_map_ptr->raidMap.devHndlInfo[io_info.pd_after_lb].devHandle[instance->dev_handle];
cmd->request_desc->SCSIIO.RequestFlags =
(MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO
<< MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ if (fusion->adapter_type == INVADER_SERIES) {
if (io_request->RaidContext.regLockFlags ==
REGION_TYPE_UNUSED)
cmd->request_desc->SCSIIO.RequestFlags =
u16 timeout_limit;
struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
struct RAID_CONTEXT *pRAID_Context;
+ struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
struct fusion_context *fusion = instance->ctrl_context;
+ pd_sync = (void *)fusion->pd_seq_sync[(instance->pd_seq_map_id - 1) & 1];
device_id = MEGASAS_DEV_INDEX(scmd);
pd_index = MEGASAS_PD_INDEX(scmd);
io_request = cmd->io_request;
/* get RAID_Context pointer */
pRAID_Context = &io_request->RaidContext;
+ pRAID_Context->regLockFlags = 0;
+ pRAID_Context->regLockRowLBA = 0;
+ pRAID_Context->regLockLength = 0;
io_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
io_request->LUN[1] = scmd->device->lun;
pRAID_Context->RAIDFlags = MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD
<< MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
- pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
- pRAID_Context->configSeqNum = 0;
- local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
- io_request->DevHandle =
- local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
+ /* If FW supports PD sequence number */
+ if (instance->use_seqnum_jbod_fp &&
+ instance->pd_list[pd_index].driveType == TYPE_DISK) {
+ /* TgtId must be incremented by 255 as jbod seq number is index
+ * below raid map
+ */
+ pRAID_Context->VirtualDiskTgtId =
+ cpu_to_le16(device_id + (MAX_PHYSICAL_DEVICES - 1));
+ pRAID_Context->configSeqNum = pd_sync->seq[pd_index].seqNum;
+ io_request->DevHandle = pd_sync->seq[pd_index].devHandle;
+ pRAID_Context->regLockFlags |=
+ (MR_RL_FLAGS_SEQ_NUM_ENABLE|MR_RL_FLAGS_GRANT_DESTINATION_CUDA);
+ } else if (fusion->fast_path_io) {
+ pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
+ pRAID_Context->configSeqNum = 0;
+ local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
+ io_request->DevHandle =
+ local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
+ } else {
+ /* Want to send all IO via FW path */
+ pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
+ pRAID_Context->configSeqNum = 0;
+ io_request->DevHandle = cpu_to_le16(0xFFFF);
+ }
cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle;
cmd->request_desc->SCSIIO.MSIxIndex =
(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
pRAID_Context->timeoutValue = cpu_to_le16(os_timeout_value);
+ pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
} else {
/* system pd Fast Path */
io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
- pRAID_Context->regLockFlags = 0;
- pRAID_Context->regLockRowLBA = 0;
- pRAID_Context->regLockLength = 0;
timeout_limit = (scmd->device->type == TYPE_DISK) ?
255 : 0xFFFF;
pRAID_Context->timeoutValue =
cpu_to_le16((os_timeout_value > timeout_limit) ?
timeout_limit : os_timeout_value);
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
- cmd->request_desc->SCSIIO.RequestFlags |=
- (MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK <<
- MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ if (fusion->adapter_type == INVADER_SERIES) {
pRAID_Context->Type = MPI2_TYPE_CUDA;
pRAID_Context->nseg = 0x1;
io_request->IoFlags |=
struct scsi_cmnd *scp,
struct megasas_cmd_fusion *cmd)
{
- u32 sge_count;
+ u16 sge_count;
u8 cmd_type;
struct MPI2_RAID_SCSI_IO_REQUEST *io_request = cmd->io_request;
return 1;
}
+ /* numSGE store lower 8 bit of sge_count.
+ * numSGEExt store higher 8 bit of sge_count
+ */
io_request->RaidContext.numSGE = sge_count;
+ io_request->RaidContext.numSGEExt = (u8)(sge_count >> 8);
io_request->SGLFlags = cpu_to_le16(MPI2_SGE_FLAGS_64_BIT_ADDRESSING);
* pending to be completed
*/
if (threshold_reply_count >= THRESHOLD_REPLY_COUNT) {
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FURY))
+ if (fusion->adapter_type == INVADER_SERIES)
writel(((MSIxIndex & 0x7) << 24) |
fusion->last_reply_idx[MSIxIndex],
instance->reply_post_host_index_addr[MSIxIndex/8]);
return IRQ_NONE;
wmb();
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+ if (fusion->adapter_type == INVADER_SERIES)
writel(((MSIxIndex & 0x7) << 24) |
fusion->last_reply_idx[MSIxIndex],
instance->reply_post_host_index_addr[MSIxIndex/8]);
io_req = cmd->io_request;
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+ if (fusion->adapter_type == INVADER_SERIES) {
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end =
(struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL;
sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
mpi25_ieee_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
- mpi25_ieee_chain->Length = cpu_to_le32(MEGASAS_MAX_SZ_CHAIN_FRAME);
+ mpi25_ieee_chain->Length = cpu_to_le32(instance->max_chain_frame_sz);
return 0;
}
megasas_adp_reset_fusion(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
+ u32 host_diag, abs_state, retry;
+
+ /* Now try to reset the chip */
+ writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_1ST_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_2ND_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_3RD_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_4TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_5TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_6TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+
+ /* Check that the diag write enable (DRWE) bit is on */
+ host_diag = readl(&instance->reg_set->fusion_host_diag);
+ retry = 0;
+ while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
+ msleep(100);
+ host_diag = readl(&instance->reg_set->fusion_host_diag);
+ if (retry++ == 100) {
+ dev_warn(&instance->pdev->dev,
+ "Host diag unlock failed from %s %d\n",
+ __func__, __LINE__);
+ break;
+ }
+ }
+ if (!(host_diag & HOST_DIAG_WRITE_ENABLE))
+ return -1;
+
+ /* Send chip reset command */
+ writel(host_diag | HOST_DIAG_RESET_ADAPTER,
+ &instance->reg_set->fusion_host_diag);
+ msleep(3000);
+
+ /* Make sure reset adapter bit is cleared */
+ host_diag = readl(&instance->reg_set->fusion_host_diag);
+ retry = 0;
+ while (host_diag & HOST_DIAG_RESET_ADAPTER) {
+ msleep(100);
+ host_diag = readl(&instance->reg_set->fusion_host_diag);
+ if (retry++ == 1000) {
+ dev_warn(&instance->pdev->dev,
+ "Diag reset adapter never cleared %s %d\n",
+ __func__, __LINE__);
+ break;
+ }
+ }
+ if (host_diag & HOST_DIAG_RESET_ADAPTER)
+ return -1;
+
+ abs_state = instance->instancet->read_fw_status_reg(instance->reg_set)
+ & MFI_STATE_MASK;
+ retry = 0;
+
+ while ((abs_state <= MFI_STATE_FW_INIT) && (retry++ < 1000)) {
+ msleep(100);
+ abs_state = instance->instancet->
+ read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
+ }
+ if (abs_state <= MFI_STATE_FW_INIT) {
+ dev_warn(&instance->pdev->dev,
+ "fw state < MFI_STATE_FW_INIT, state = 0x%x %s %d\n",
+ abs_state, __func__, __LINE__);
+ return -1;
+ }
+
return 0;
}
continue;
req_desc = megasas_get_request_descriptor
(instance, smid - 1);
- if (req_desc && (cmd_mfi->frame->dcmd.opcode !=
- cpu_to_le32(MR_DCMD_LD_MAP_GET_INFO)))
+ if (req_desc && ((cmd_mfi->frame->dcmd.opcode !=
+ cpu_to_le32(MR_DCMD_LD_MAP_GET_INFO)) &&
+ (cmd_mfi->frame->dcmd.opcode !=
+ cpu_to_le32(MR_DCMD_SYSTEM_PD_MAP_GET_INFO))))
megasas_fire_cmd_fusion(instance, req_desc);
else
megasas_return_cmd(instance, cmd_mfi);
/* Core fusion reset function */
int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
{
- int retval = SUCCESS, i, retry = 0, convert = 0;
+ int retval = SUCCESS, i, convert = 0;
struct megasas_instance *instance;
struct megasas_cmd_fusion *cmd_fusion;
struct fusion_context *fusion;
- u32 host_diag, abs_state, status_reg, reset_adapter;
+ u32 abs_state, status_reg, reset_adapter;
u32 io_timeout_in_crash_mode = 0;
struct scsi_cmnd *scmd_local = NULL;
/* Now try to reset the chip */
for (i = 0; i < MEGASAS_FUSION_MAX_RESET_TRIES; i++) {
- writel(MPI2_WRSEQ_FLUSH_KEY_VALUE,
- &instance->reg_set->fusion_seq_offset);
- writel(MPI2_WRSEQ_1ST_KEY_VALUE,
- &instance->reg_set->fusion_seq_offset);
- writel(MPI2_WRSEQ_2ND_KEY_VALUE,
- &instance->reg_set->fusion_seq_offset);
- writel(MPI2_WRSEQ_3RD_KEY_VALUE,
- &instance->reg_set->fusion_seq_offset);
- writel(MPI2_WRSEQ_4TH_KEY_VALUE,
- &instance->reg_set->fusion_seq_offset);
- writel(MPI2_WRSEQ_5TH_KEY_VALUE,
- &instance->reg_set->fusion_seq_offset);
- writel(MPI2_WRSEQ_6TH_KEY_VALUE,
- &instance->reg_set->fusion_seq_offset);
-
- /* Check that the diag write enable (DRWE) bit is on */
- host_diag = readl(&instance->reg_set->fusion_host_diag);
- retry = 0;
- while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
- msleep(100);
- host_diag =
- readl(&instance->reg_set->fusion_host_diag);
- if (retry++ == 100) {
- dev_warn(&instance->pdev->dev,
- "Host diag unlock failed! "
- "for scsi%d\n",
- instance->host->host_no);
- break;
- }
- }
- if (!(host_diag & HOST_DIAG_WRITE_ENABLE))
- continue;
- /* Send chip reset command */
- writel(host_diag | HOST_DIAG_RESET_ADAPTER,
- &instance->reg_set->fusion_host_diag);
- msleep(3000);
-
- /* Make sure reset adapter bit is cleared */
- host_diag = readl(&instance->reg_set->fusion_host_diag);
- retry = 0;
- while (host_diag & HOST_DIAG_RESET_ADAPTER) {
- msleep(100);
- host_diag =
- readl(&instance->reg_set->fusion_host_diag);
- if (retry++ == 1000) {
- dev_warn(&instance->pdev->dev,
- "Diag reset adapter never "
- "cleared for scsi%d!\n",
- instance->host->host_no);
- break;
- }
- }
- if (host_diag & HOST_DIAG_RESET_ADAPTER)
+ if (instance->instancet->adp_reset
+ (instance, instance->reg_set))
continue;
- abs_state =
- instance->instancet->read_fw_status_reg(
- instance->reg_set) & MFI_STATE_MASK;
- retry = 0;
-
- while ((abs_state <= MFI_STATE_FW_INIT) &&
- (retry++ < 1000)) {
- msleep(100);
- abs_state =
- instance->instancet->read_fw_status_reg(
- instance->reg_set) & MFI_STATE_MASK;
- }
- if (abs_state <= MFI_STATE_FW_INIT) {
- dev_warn(&instance->pdev->dev, "firmware "
- "state < MFI_STATE_FW_INIT, state = "
- "0x%x for scsi%d\n", abs_state,
- instance->host->host_no);
- continue;
- }
-
/* Wait for FW to become ready */
if (megasas_transition_to_ready(instance, 1)) {
dev_warn(&instance->pdev->dev, "Failed to "
if (!megasas_get_map_info(instance))
megasas_sync_map_info(instance);
+ megasas_setup_jbod_map(instance);
+
clear_bit(MEGASAS_FUSION_IN_RESET,
&instance->reset_flags);
instance->instancet->enable_intr(instance);
#define _MEGARAID_SAS_FUSION_H_
/* Fusion defines */
-#define MEGASAS_MAX_SZ_CHAIN_FRAME 1024
+#define MEGASAS_CHAIN_FRAME_SZ_MIN 1024
#define MFI_FUSION_ENABLE_INTERRUPT_MASK (0x00000009)
+#define MEGASAS_MAX_CHAIN_SHIFT 5
+#define MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK 0x400000
+#define MEGASAS_MAX_CHAIN_SIZE_MASK 0x3E0
+#define MEGASAS_256K_IO 128
+#define MEGASAS_1MB_IO (MEGASAS_256K_IO * 4)
#define MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE 256
#define MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST 0xF0
#define MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST 0xF1
#define MEGASAS_FP_CMD_LEN 16
#define MEGASAS_FUSION_IN_RESET 0
#define THRESHOLD_REPLY_COUNT 50
+#define JBOD_MAPS_COUNT 2
+
+enum MR_FUSION_ADAPTER_TYPE {
+ THUNDERBOLT_SERIES = 0,
+ INVADER_SERIES = 1,
+};
/*
* Raid Context structure which describes MegaRAID specific IO Parameters
u8 numSGE;
__le16 configSeqNum;
u8 spanArm;
- u8 resvd2[3];
+ u8 priority;
+ u8 numSGEExt;
+ u8 resvd2;
};
#define RAID_CTX_SPANARM_ARM_SHIFT (0)
#define MAX_PHYSICAL_DEVICES 256
#define MAX_RAIDMAP_PHYSICAL_DEVICES (MAX_PHYSICAL_DEVICES)
#define MR_DCMD_LD_MAP_GET_INFO 0x0300e101
+#define MR_DCMD_SYSTEM_PD_MAP_GET_INFO 0x0200e102
#define MR_DCMD_CTRL_SHARED_HOST_MEM_ALLOC 0x010e8485 /* SR-IOV HB alloc*/
#define MR_DCMD_LD_VF_MAP_GET_ALL_LDS_111 0x03200200
#define MR_DCMD_LD_VF_MAP_GET_ALL_LDS 0x03150200
struct MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES_EXT];
};
+/*
+ * * define MR_PD_CFG_SEQ structure for system PDs
+ * */
+struct MR_PD_CFG_SEQ {
+ __le16 seqNum;
+ __le16 devHandle;
+ u8 reserved[4];
+} __packed;
+
+struct MR_PD_CFG_SEQ_NUM_SYNC {
+ __le32 size;
+ __le32 count;
+ struct MR_PD_CFG_SEQ seq[1];
+} __packed;
+
struct fusion_context {
struct megasas_cmd_fusion **cmd_list;
dma_addr_t req_frames_desc_phys;
u32 current_map_sz;
u32 drv_map_sz;
u32 drv_map_pages;
+ struct MR_PD_CFG_SEQ_NUM_SYNC *pd_seq_sync[JBOD_MAPS_COUNT];
+ dma_addr_t pd_seq_phys[JBOD_MAPS_COUNT];
u8 fast_path_io;
struct LD_LOAD_BALANCE_INFO load_balance_info[MAX_LOGICAL_DRIVES_EXT];
LD_SPAN_INFO log_to_span[MAX_LOGICAL_DRIVES_EXT];
+ u8 adapter_type;
};
union desc_value {
+++ /dev/null
-#
-# Kernel configuration file for the MPT2SAS
-#
-# This code is based on drivers/scsi/mpt2sas/Kconfig
-# Copyright (C) 2007-2014 LSI Corporation
-# (mailto:DL-MPTFusionLinux@lsi.com)
-
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# NO WARRANTY
-# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-# solely responsible for determining the appropriateness of using and
-# distributing the Program and assumes all risks associated with its
-# exercise of rights under this Agreement, including but not limited to
-# the risks and costs of program errors, damage to or loss of data,
-# programs or equipment, and unavailability or interruption of operations.
-
-# DISCLAIMER OF LIABILITY
-# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-# USA.
-
-config SCSI_MPT2SAS
- tristate "LSI MPT Fusion SAS 2.0 Device Driver"
- depends on PCI && SCSI
- select SCSI_SAS_ATTRS
- select RAID_ATTRS
- ---help---
- This driver supports PCI-Express SAS 6Gb/s Host Adapters.
-
-config SCSI_MPT2SAS_MAX_SGE
- int "LSI MPT Fusion Max number of SG Entries (16 - 128)"
- depends on PCI && SCSI && SCSI_MPT2SAS
- default "128"
- range 16 128
- ---help---
- This option allows you to specify the maximum number of scatter-
- gather entries per I/O. The driver default is 128, which matches
- SAFE_PHYS_SEGMENTS. However, it may decreased down to 16.
- Decreasing this parameter will reduce memory requirements
- on a per controller instance.
-
-config SCSI_MPT2SAS_LOGGING
- bool "LSI MPT Fusion logging facility"
- depends on PCI && SCSI && SCSI_MPT2SAS
- ---help---
- This turns on a logging facility.
+++ /dev/null
-# mpt2sas makefile
-obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas.o
-mpt2sas-y += mpt2sas_base.o \
- mpt2sas_config.o \
- mpt2sas_scsih.o \
- mpt2sas_transport.o \
- mpt2sas_ctl.o
+++ /dev/null
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2.h
- * Title: MPI Message independent structures and definitions
- * including System Interface Register Set and
- * scatter/gather formats.
- * Creation Date: June 21, 2006
- *
- * mpi2.h Version: 02.00.35
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
- * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
- * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
- * Moved ReplyPostHostIndex register to offset 0x6C of the
- * MPI2_SYSTEM_INTERFACE_REGS and modified the define for
- * MPI2_REPLY_POST_HOST_INDEX_OFFSET.
- * Added union of request descriptors.
- * Added union of reply descriptors.
- * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added define for MPI2_VERSION_02_00.
- * Fixed the size of the FunctionDependent5 field in the
- * MPI2_DEFAULT_REPLY structure.
- * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
- * Removed the MPI-defined Fault Codes and extended the
- * product specific codes up to 0xEFFF.
- * Added a sixth key value for the WriteSequence register
- * and changed the flush value to 0x0.
- * Added message function codes for Diagnostic Buffer Post
- * and Diagnsotic Release.
- * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
- * Moved MPI2_VERSION_UNION from mpi2_ioc.h.
- * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
- * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
- * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added #defines for marking a reply descriptor as unused.
- * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
- * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
- * Moved LUN field defines from mpi2_init.h.
- * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
- * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
- * In all request and reply descriptors, replaced VF_ID
- * field with MSIxIndex field.
- * Removed DevHandle field from
- * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
- * bytes reserved.
- * Added RAID Accelerator functionality.
- * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
- * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added MSI-x index mask and shift for Reply Post Host
- * Index register.
- * Added function code for Host Based Discovery Action.
- * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
- * Added defines for product-specific range of message
- * function codes, 0xF0 to 0xFF.
- * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added alternative defines for the SGE Direction bit.
- * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT.
- * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
- * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
- * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT.
- * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT.
- * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT.
- * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT.
- * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT.
- * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added Hard Reset delay timings.
- * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT.
- * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT.
- * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT.
- * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
- * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT.
- * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT.
- * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT.
- * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT.
- * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT.
- * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_H
-#define MPI2_H
-
-
-/*****************************************************************************
-*
-* MPI Version Definitions
-*
-*****************************************************************************/
-
-#define MPI2_VERSION_MAJOR (0x02)
-#define MPI2_VERSION_MINOR (0x00)
-#define MPI2_VERSION_MAJOR_MASK (0xFF00)
-#define MPI2_VERSION_MAJOR_SHIFT (8)
-#define MPI2_VERSION_MINOR_MASK (0x00FF)
-#define MPI2_VERSION_MINOR_SHIFT (0)
-#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
- MPI2_VERSION_MINOR)
-
-#define MPI2_VERSION_02_00 (0x0200)
-
-/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x23)
-#define MPI2_HEADER_VERSION_DEV (0x00)
-#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
-#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
-#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
-#define MPI2_HEADER_VERSION_DEV_SHIFT (0)
-#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV)
-
-
-/*****************************************************************************
-*
-* IOC State Definitions
-*
-*****************************************************************************/
-
-#define MPI2_IOC_STATE_RESET (0x00000000)
-#define MPI2_IOC_STATE_READY (0x10000000)
-#define MPI2_IOC_STATE_OPERATIONAL (0x20000000)
-#define MPI2_IOC_STATE_FAULT (0x40000000)
-
-#define MPI2_IOC_STATE_MASK (0xF0000000)
-#define MPI2_IOC_STATE_SHIFT (28)
-
-/* Fault state range for prodcut specific codes */
-#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000)
-#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF)
-
-
-/*****************************************************************************
-*
-* System Interface Register Definitions
-*
-*****************************************************************************/
-
-typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS
-{
- U32 Doorbell; /* 0x00 */
- U32 WriteSequence; /* 0x04 */
- U32 HostDiagnostic; /* 0x08 */
- U32 Reserved1; /* 0x0C */
- U32 DiagRWData; /* 0x10 */
- U32 DiagRWAddressLow; /* 0x14 */
- U32 DiagRWAddressHigh; /* 0x18 */
- U32 Reserved2[5]; /* 0x1C */
- U32 HostInterruptStatus; /* 0x30 */
- U32 HostInterruptMask; /* 0x34 */
- U32 DCRData; /* 0x38 */
- U32 DCRAddress; /* 0x3C */
- U32 Reserved3[2]; /* 0x40 */
- U32 ReplyFreeHostIndex; /* 0x48 */
- U32 Reserved4[8]; /* 0x4C */
- U32 ReplyPostHostIndex; /* 0x6C */
- U32 Reserved5; /* 0x70 */
- U32 HCBSize; /* 0x74 */
- U32 HCBAddressLow; /* 0x78 */
- U32 HCBAddressHigh; /* 0x7C */
- U32 Reserved6[16]; /* 0x80 */
- U32 RequestDescriptorPostLow; /* 0xC0 */
- U32 RequestDescriptorPostHigh; /* 0xC4 */
- U32 Reserved7[14]; /* 0xC8 */
-} MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS,
- Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t;
-
-/*
- * Defines for working with the Doorbell register.
- */
-#define MPI2_DOORBELL_OFFSET (0x00000000)
-
-/* IOC --> System values */
-#define MPI2_DOORBELL_USED (0x08000000)
-#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000)
-#define MPI2_DOORBELL_WHO_INIT_SHIFT (24)
-#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF)
-#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF)
-
-/* System --> IOC values */
-#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000)
-#define MPI2_DOORBELL_FUNCTION_SHIFT (24)
-#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000)
-#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16)
-
-
-/*
- * Defines for the WriteSequence register
- */
-#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004)
-#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F)
-#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0)
-#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF)
-#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4)
-#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB)
-#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2)
-#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7)
-#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD)
-
-/*
- * Defines for the HostDiagnostic register
- */
-#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008)
-
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800)
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
-
-#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
-#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200)
-#define MPI2_DIAG_HCB_MODE (0x00000100)
-#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080)
-#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040)
-#define MPI2_DIAG_RESET_HISTORY (0x00000020)
-#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010)
-#define MPI2_DIAG_RESET_ADAPTER (0x00000004)
-#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002)
-
-/*
- * Offsets for DiagRWData and address
- */
-#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010)
-#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014)
-#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018)
-
-/*
- * Defines for the HostInterruptStatus register
- */
-#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030)
-#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000)
-#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS
-#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000)
-#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008)
-#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001)
-#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS
-
-/*
- * Defines for the HostInterruptMask register
- */
-#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034)
-#define MPI2_HIM_RESET_IRQ_MASK (0x40000000)
-#define MPI2_HIM_REPLY_INT_MASK (0x00000008)
-#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK
-#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001)
-#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK
-
-/*
- * Offsets for DCRData and address
- */
-#define MPI2_DCR_DATA_OFFSET (0x00000038)
-#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C)
-
-/*
- * Offset for the Reply Free Queue
- */
-#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048)
-
-/*
- * Defines for the Reply Descriptor Post Queue
- */
-#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C)
-#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
-#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
-#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
-#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /* MPI v2.5 only */
-
-/*
- * Defines for the HCBSize and address
- */
-#define MPI2_HCB_SIZE_OFFSET (0x00000074)
-#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000)
-#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001)
-
-#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078)
-#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C)
-
-/*
- * Offsets for the Request Queue
- */
-#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0)
-#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4)
-
-
-/* Hard Reset delay timings */
-#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000)
-#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000)
-#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000)
-
-/*****************************************************************************
-*
-* Message Descriptors
-*
-*****************************************************************************/
-
-/* Request Descriptors */
-
-/* Default Request Descriptor */
-typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
-{
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 DescriptorTypeDependent; /* 0x06 */
-} MPI2_DEFAULT_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
- Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t;
-
-/* defines for the RequestFlags field */
-#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
-#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
-#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02)
-#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
-#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
-#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
-
-#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
-
-
-/* High Priority Request Descriptor */
-typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
-{
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 Reserved1; /* 0x06 */
-} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
- Mpi2HighPriorityRequestDescriptor_t,
- MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t;
-
-
-/* SCSI IO Request Descriptor */
-typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
-{
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 DevHandle; /* 0x06 */
-} MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
- Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t;
-
-
-/* SCSI Target Request Descriptor */
-typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
-{
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 IoIndex; /* 0x06 */
-} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
- Mpi2SCSITargetRequestDescriptor_t,
- MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
-
-
-/* RAID Accelerator Request Descriptor */
-typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 Reserved; /* 0x06 */
-} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
- Mpi2RAIDAcceleratorRequestDescriptor_t,
- MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
-
-
-/* union of Request Descriptors */
-typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
-{
- MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
- MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
- MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
- MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
- MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
- U64 Words;
-} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
- Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t;
-
-
-/* Reply Descriptors */
-
-/* Default Reply Descriptor */
-typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 DescriptorTypeDependent1; /* 0x02 */
- U32 DescriptorTypeDependent2; /* 0x04 */
-} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
- Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
-
-/* defines for the ReplyFlags field */
-#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
-#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
-#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
-#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
-#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
-
-/* values for marking a reply descriptor as unused */
-#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF)
-#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF)
-
-/* Address Reply Descriptor */
-typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U32 ReplyFrameAddress; /* 0x04 */
-} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
- Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t;
-
-#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00)
-
-
-/* SCSI IO Success Reply Descriptor */
-typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 TaskTag; /* 0x04 */
- U16 Reserved1; /* 0x06 */
-} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
- Mpi2SCSIIOSuccessReplyDescriptor_t,
- MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t;
-
-
-/* TargetAssist Success Reply Descriptor */
-typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U8 SequenceNumber; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 IoIndex; /* 0x06 */
-} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
- Mpi2TargetAssistSuccessReplyDescriptor_t,
- MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t;
-
-
-/* Target Command Buffer Reply Descriptor */
-typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U8 VP_ID; /* 0x02 */
- U8 Flags; /* 0x03 */
- U16 InitiatorDevHandle; /* 0x04 */
- U16 IoIndex; /* 0x06 */
-} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
- Mpi2TargetCommandBufferReplyDescriptor_t,
- MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t;
-
-/* defines for Flags field */
-#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F)
-
-
-/* RAID Accelerator Success Reply Descriptor */
-typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U32 Reserved; /* 0x04 */
-} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
- Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
- MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
-
-
-/* union of Reply Descriptors */
-typedef union _MPI2_REPLY_DESCRIPTORS_UNION
-{
- MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
- MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
- MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
- MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
- MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
- MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
- U64 Words;
-} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
-Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
-
-
-
-/*****************************************************************************
-*
-* Message Functions
-*
-*****************************************************************************/
-
-#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */
-#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */
-#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */
-#define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */
-#define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */
-#define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */
-#define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */
-#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */
-#define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */
-#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */
-#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */
-#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */
-#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */
-#define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */
-#define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */
-#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */
-#define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */
-#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */
-#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */
-#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */
-#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */
-#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */
-#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */
-#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */
-#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */
-#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator*/
-/* Host Based Discovery Action */
-#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
-/* Power Management Control */
-#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30)
-/* Send Host Message */
-#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31)
-/* beginning of product-specific range */
-#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0)
-/* end of product-specific range */
-#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF)
-
-
-
-
-/* Doorbell functions */
-#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
-#define MPI2_FUNCTION_HANDSHAKE (0x42)
-
-
-/*****************************************************************************
-*
-* IOC Status Values
-*
-*****************************************************************************/
-
-/* mask for IOCStatus status value */
-#define MPI2_IOCSTATUS_MASK (0x7FFF)
-
-/****************************************************************************
-* Common IOCStatus values for all replies
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SUCCESS (0x0000)
-#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001)
-#define MPI2_IOCSTATUS_BUSY (0x0002)
-#define MPI2_IOCSTATUS_INVALID_SGL (0x0003)
-#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004)
-#define MPI2_IOCSTATUS_INVALID_VPID (0x0005)
-#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
-#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007)
-#define MPI2_IOCSTATUS_INVALID_STATE (0x0008)
-#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
-
-/****************************************************************************
-* Config IOCStatus values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
-#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
-#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
-
-/****************************************************************************
-* SCSI IO Reply
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
-#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
-#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
-#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
-#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
-#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
-#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
-#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
-#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
-#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
-#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
-#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
-
-/****************************************************************************
-* For use by SCSI Initiator and SCSI Target end-to-end data protection
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
-#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
-#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
-
-/****************************************************************************
-* SCSI Target values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
-#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063)
-#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
-#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
-#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
-#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
-#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
-#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
-#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
-#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
-
-/****************************************************************************
-* Serial Attached SCSI values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
-#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
-
-/****************************************************************************
-* Diagnostic Buffer Post / Diagnostic Release values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
-
-/****************************************************************************
-* RAID Accelerator values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0)
-
-/****************************************************************************
-* IOCStatus flag to indicate that log info is available
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
-
-/****************************************************************************
-* IOCLogInfo Types
-****************************************************************************/
-
-#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000)
-#define MPI2_IOCLOGINFO_TYPE_SHIFT (28)
-#define MPI2_IOCLOGINFO_TYPE_NONE (0x0)
-#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1)
-#define MPI2_IOCLOGINFO_TYPE_FC (0x2)
-#define MPI2_IOCLOGINFO_TYPE_SAS (0x3)
-#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4)
-#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
-
-
-/*****************************************************************************
-*
-* Standard Message Structures
-*
-*****************************************************************************/
-
-/****************************************************************************
-* Request Message Header for all request messages
-****************************************************************************/
-
-typedef struct _MPI2_REQUEST_HEADER
-{
- U16 FunctionDependent1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 FunctionDependent2; /* 0x04 */
- U8 FunctionDependent3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
-} MPI2_REQUEST_HEADER, MPI2_POINTER PTR_MPI2_REQUEST_HEADER,
- MPI2RequestHeader_t, MPI2_POINTER pMPI2RequestHeader_t;
-
-
-/****************************************************************************
-* Default Reply
-****************************************************************************/
-
-typedef struct _MPI2_DEFAULT_REPLY
-{
- U16 FunctionDependent1; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 FunctionDependent2; /* 0x04 */
- U8 FunctionDependent3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U16 FunctionDependent5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_DEFAULT_REPLY, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY,
- MPI2DefaultReply_t, MPI2_POINTER pMPI2DefaultReply_t;
-
-
-/* common version structure/union used in messages and configuration pages */
-
-typedef struct _MPI2_VERSION_STRUCT
-{
- U8 Dev; /* 0x00 */
- U8 Unit; /* 0x01 */
- U8 Minor; /* 0x02 */
- U8 Major; /* 0x03 */
-} MPI2_VERSION_STRUCT;
-
-typedef union _MPI2_VERSION_UNION
-{
- MPI2_VERSION_STRUCT Struct;
- U32 Word;
-} MPI2_VERSION_UNION;
-
-
-/* LUN field defines, common to many structures */
-#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
-#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
-#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
-#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
-#define MPI2_LUN_LEVEL_1_WORD (0xFF00)
-#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00)
-
-
-/*****************************************************************************
-*
-* Fusion-MPT MPI Scatter Gather Elements
-*
-*****************************************************************************/
-
-/****************************************************************************
-* MPI Simple Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_SIMPLE32
-{
- U32 FlagsLength;
- U32 Address;
-} MPI2_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_SGE_SIMPLE32,
- Mpi2SGESimple32_t, MPI2_POINTER pMpi2SGESimple32_t;
-
-typedef struct _MPI2_SGE_SIMPLE64
-{
- U32 FlagsLength;
- U64 Address;
-} MPI2_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_SGE_SIMPLE64,
- Mpi2SGESimple64_t, MPI2_POINTER pMpi2SGESimple64_t;
-
-typedef struct _MPI2_SGE_SIMPLE_UNION
-{
- U32 FlagsLength;
- union
- {
- U32 Address32;
- U64 Address64;
- } u;
-} MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION,
- Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t;
-
-
-/****************************************************************************
-* MPI Chain Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_CHAIN32
-{
- U16 Length;
- U8 NextChainOffset;
- U8 Flags;
- U32 Address;
-} MPI2_SGE_CHAIN32, MPI2_POINTER PTR_MPI2_SGE_CHAIN32,
- Mpi2SGEChain32_t, MPI2_POINTER pMpi2SGEChain32_t;
-
-typedef struct _MPI2_SGE_CHAIN64
-{
- U16 Length;
- U8 NextChainOffset;
- U8 Flags;
- U64 Address;
-} MPI2_SGE_CHAIN64, MPI2_POINTER PTR_MPI2_SGE_CHAIN64,
- Mpi2SGEChain64_t, MPI2_POINTER pMpi2SGEChain64_t;
-
-typedef struct _MPI2_SGE_CHAIN_UNION
-{
- U16 Length;
- U8 NextChainOffset;
- U8 Flags;
- union
- {
- U32 Address32;
- U64 Address64;
- } u;
-} MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION,
- Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t;
-
-
-/****************************************************************************
-* MPI Transaction Context Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_TRANSACTION32
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- U32 TransactionContext[1];
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION32, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION32,
- Mpi2SGETransaction32_t, MPI2_POINTER pMpi2SGETransaction32_t;
-
-typedef struct _MPI2_SGE_TRANSACTION64
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- U32 TransactionContext[2];
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION64, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION64,
- Mpi2SGETransaction64_t, MPI2_POINTER pMpi2SGETransaction64_t;
-
-typedef struct _MPI2_SGE_TRANSACTION96
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- U32 TransactionContext[3];
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION96, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION96,
- Mpi2SGETransaction96_t, MPI2_POINTER pMpi2SGETransaction96_t;
-
-typedef struct _MPI2_SGE_TRANSACTION128
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- U32 TransactionContext[4];
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION128, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION128,
- Mpi2SGETransaction_t128, MPI2_POINTER pMpi2SGETransaction_t128;
-
-typedef struct _MPI2_SGE_TRANSACTION_UNION
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- union
- {
- U32 TransactionContext32[1];
- U32 TransactionContext64[2];
- U32 TransactionContext96[3];
- U32 TransactionContext128[4];
- } u;
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION_UNION,
- Mpi2SGETransactionUnion_t, MPI2_POINTER pMpi2SGETransactionUnion_t;
-
-
-/****************************************************************************
-* MPI SGE union for IO SGL's
-****************************************************************************/
-
-typedef struct _MPI2_MPI_SGE_IO_UNION
-{
- union
- {
- MPI2_SGE_SIMPLE_UNION Simple;
- MPI2_SGE_CHAIN_UNION Chain;
- } u;
-} MPI2_MPI_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_IO_UNION,
- Mpi2MpiSGEIOUnion_t, MPI2_POINTER pMpi2MpiSGEIOUnion_t;
-
-
-/****************************************************************************
-* MPI SGE union for SGL's with Simple and Transaction elements
-****************************************************************************/
-
-typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION
-{
- union
- {
- MPI2_SGE_SIMPLE_UNION Simple;
- MPI2_SGE_TRANSACTION_UNION Transaction;
- } u;
-} MPI2_SGE_TRANS_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANS_SIMPLE_UNION,
- Mpi2SGETransSimpleUnion_t, MPI2_POINTER pMpi2SGETransSimpleUnion_t;
-
-
-/****************************************************************************
-* All MPI SGE types union
-****************************************************************************/
-
-typedef struct _MPI2_MPI_SGE_UNION
-{
- union
- {
- MPI2_SGE_SIMPLE_UNION Simple;
- MPI2_SGE_CHAIN_UNION Chain;
- MPI2_SGE_TRANSACTION_UNION Transaction;
- } u;
-} MPI2_MPI_SGE_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_UNION,
- Mpi2MpiSgeUnion_t, MPI2_POINTER pMpi2MpiSgeUnion_t;
-
-
-/****************************************************************************
-* MPI SGE field definition and masks
-****************************************************************************/
-
-/* Flags field bit definitions */
-
-#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80)
-#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40)
-#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30)
-#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08)
-#define MPI2_SGE_FLAGS_DIRECTION (0x04)
-#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02)
-#define MPI2_SGE_FLAGS_END_OF_LIST (0x01)
-
-#define MPI2_SGE_FLAGS_SHIFT (24)
-
-#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF)
-#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF)
-
-/* Element Type */
-
-#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00)
-#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10)
-#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30)
-#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30)
-
-/* Address location */
-
-#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00)
-
-/* Direction */
-
-#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00)
-#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04)
-
-#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST)
-#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC)
-
-/* Address Size */
-
-#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00)
-#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
-
-/* Context Size */
-
-#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00)
-#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02)
-#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04)
-#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06)
-
-#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000)
-#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16)
-
-/****************************************************************************
-* MPI SGE operation Macros
-****************************************************************************/
-
-/* SIMPLE FlagsLength manipulations... */
-#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT)
-#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> MPI2_SGE_FLAGS_SHIFT)
-#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK)
-#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK)
-
-#define MPI2_SGE_SET_FLAGS_LENGTH(f,l) (MPI2_SGE_SET_FLAGS(f) | MPI2_SGE_LENGTH(l))
-
-#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength)
-#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength)
-#define MPI2_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_SGE_SET_FLAGS_LENGTH(f,l)
-
-/* CAUTION - The following are READ-MODIFY-WRITE! */
-#define MPI2_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_SGE_SET_FLAGS(f)
-#define MPI2_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_SGE_LENGTH(l)
-
-#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> MPI2_SGE_CHAIN_OFFSET_SHIFT)
-
-
-/*****************************************************************************
-*
-* Fusion-MPT IEEE Scatter Gather Elements
-*
-*****************************************************************************/
-
-/****************************************************************************
-* IEEE Simple Element structures
-****************************************************************************/
-
-typedef struct _MPI2_IEEE_SGE_SIMPLE32
-{
- U32 Address;
- U32 FlagsLength;
-} MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32,
- Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t;
-
-typedef struct _MPI2_IEEE_SGE_SIMPLE64
-{
- U64 Address;
- U32 Length;
- U16 Reserved1;
- U8 Reserved2;
- U8 Flags;
-} MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64,
- Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t;
-
-typedef union _MPI2_IEEE_SGE_SIMPLE_UNION
-{
- MPI2_IEEE_SGE_SIMPLE32 Simple32;
- MPI2_IEEE_SGE_SIMPLE64 Simple64;
-} MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
- Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t;
-
-
-/****************************************************************************
-* IEEE Chain Element structures
-****************************************************************************/
-
-typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32;
-
-typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64;
-
-typedef union _MPI2_IEEE_SGE_CHAIN_UNION
-{
- MPI2_IEEE_SGE_CHAIN32 Chain32;
- MPI2_IEEE_SGE_CHAIN64 Chain64;
-} MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION,
- Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t;
-
-
-/****************************************************************************
-* All IEEE SGE types union
-****************************************************************************/
-
-typedef struct _MPI2_IEEE_SGE_UNION
-{
- union
- {
- MPI2_IEEE_SGE_SIMPLE_UNION Simple;
- MPI2_IEEE_SGE_CHAIN_UNION Chain;
- } u;
-} MPI2_IEEE_SGE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_UNION,
- Mpi2IeeeSgeUnion_t, MPI2_POINTER pMpi2IeeeSgeUnion_t;
-
-
-/****************************************************************************
-* IEEE SGE field definitions and masks
-****************************************************************************/
-
-/* Flags field bit definitions */
-
-#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80)
-
-#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24)
-
-#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF)
-
-/* Element Type */
-
-#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00)
-#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
-
-/* Data Location Address Space */
-
-#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03)
-#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00)
- /* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01)
- /* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02)
-#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
- /* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03)
- /* IEEE Chain Element only */
-#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \
- (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) /* typo in name */
-
-/****************************************************************************
-* IEEE SGE operation Macros
-****************************************************************************/
-
-/* SIMPLE FlagsLength manipulations... */
-#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT)
-#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) >> MPI2_IEEE32_SGE_FLAGS_SHIFT)
-#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK)
-
-#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) | MPI2_IEEE32_SGE_LENGTH(l))
-
-#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength)
-#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength)
-#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f,l)
-
-/* CAUTION - The following are READ-MODIFY-WRITE! */
-#define MPI2_IEEE32_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_IEEE32_SGE_SET_FLAGS(f)
-#define MPI2_IEEE32_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_IEEE32_SGE_LENGTH(l)
-
-
-
-
-/*****************************************************************************
-*
-* Fusion-MPT MPI/IEEE Scatter Gather Unions
-*
-*****************************************************************************/
-
-typedef union _MPI2_SIMPLE_SGE_UNION
-{
- MPI2_SGE_SIMPLE_UNION MpiSimple;
- MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
-} MPI2_SIMPLE_SGE_UNION, MPI2_POINTER PTR_MPI2_SIMPLE_SGE_UNION,
- Mpi2SimpleSgeUntion_t, MPI2_POINTER pMpi2SimpleSgeUntion_t;
-
-
-typedef union _MPI2_SGE_IO_UNION
-{
- MPI2_SGE_SIMPLE_UNION MpiSimple;
- MPI2_SGE_CHAIN_UNION MpiChain;
- MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
- MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
-} MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION,
- Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t;
-
-
-/****************************************************************************
-*
-* Values for SGLFlags field, used in many request messages with an SGL
-*
-****************************************************************************/
-
-/* values for MPI SGL Data Location Address Space subfield */
-#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C)
-#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00)
-#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04)
-#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08)
-#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C)
-/* values for SGL Type subfield */
-#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03)
-#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00)
-#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01)
-#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02)
-
-
-#endif
-
+++ /dev/null
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_cnfg.h
- * Title: MPI Configuration messages and pages
- * Creation Date: November 10, 2006
- *
- * mpi2_cnfg.h Version: 02.00.29
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
- * Added Manufacturing Page 11.
- * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
- * define.
- * 06-26-07 02.00.02 Adding generic structure for product-specific
- * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
- * Rework of BIOS Page 2 configuration page.
- * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
- * forms.
- * Added configuration pages IOC Page 8 and Driver
- * Persistent Mapping Page 0.
- * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
- * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
- * RAID Physical Disk Pages 0 and 1, RAID Configuration
- * Page 0).
- * Added new value for AccessStatus field of SAS Device
- * Page 0 (_SATA_NEEDS_INITIALIZATION).
- * 10-31-07 02.00.04 Added missing SEPDevHandle field to
- * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
- * NVDATA.
- * Modified IOC Page 7 to use masks and added field for
- * SASBroadcastPrimitiveMasks.
- * Added MPI2_CONFIG_PAGE_BIOS_4.
- * Added MPI2_CONFIG_PAGE_LOG_0.
- * 02-29-08 02.00.06 Modified various names to make them 32-character unique.
- * Added SAS Device IDs.
- * Updated Integrated RAID configuration pages including
- * Manufacturing Page 4, IOC Page 6, and RAID Configuration
- * Page 0.
- * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
- * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
- * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
- * Added missing MaxNumRoutedSasAddresses field to
- * MPI2_CONFIG_PAGE_EXPANDER_0.
- * Added SAS Port Page 0.
- * Modified structure layout for
- * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
- * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
- * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
- * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
- * to 0x000000FF.
- * Added two new values for the Physical Disk Coercion Size
- * bits in the Flags field of Manufacturing Page 4.
- * Added product-specific Manufacturing pages 16 to 31.
- * Modified Flags bits for controlling write cache on SATA
- * drives in IO Unit Page 1.
- * Added new bit to AdditionalControlFlags of SAS IO Unit
- * Page 1 to control Invalid Topology Correction.
- * Added additional defines for RAID Volume Page 0
- * VolumeStatusFlags field.
- * Modified meaning of RAID Volume Page 0 VolumeSettings
- * define for auto-configure of hot-swap drives.
- * Added SupportedPhysDisks field to RAID Volume Page 1 and
- * added related defines.
- * Added PhysDiskAttributes field (and related defines) to
- * RAID Physical Disk Page 0.
- * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
- * Added three new DiscoveryStatus bits for SAS IO Unit
- * Page 0 and SAS Expander Page 0.
- * Removed multiplexing information from SAS IO Unit pages.
- * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
- * Removed Zone Address Resolved bit from PhyInfo and from
- * Expander Page 0 Flags field.
- * Added two new AccessStatus values to SAS Device Page 0
- * for indicating routing problems. Added 3 reserved words
- * to this page.
- * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
- * Inserted missing reserved field into structure for IOC
- * Page 6.
- * Added more pending task bits to RAID Volume Page 0
- * VolumeStatusFlags defines.
- * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
- * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
- * and SAS Expander Page 0 to flag a downstream initiator
- * when in simplified routing mode.
- * Removed SATA Init Failure defines for DiscoveryStatus
- * fields of SAS IO Unit Page 0 and SAS Expander Page 0.
- * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
- * Added PortGroups, DmaGroup, and ControlGroup fields to
- * SAS Device Page 0.
- * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
- * Unit Page 6.
- * Added expander reduced functionality data to SAS
- * Expander Page 0.
- * Added SAS PHY Page 2 and SAS PHY Page 3.
- * 07-30-09 02.00.12 Added IO Unit Page 7.
- * Added new device ids.
- * Added SAS IO Unit Page 5.
- * Added partial and slumber power management capable flags
- * to SAS Device Page 0 Flags field.
- * Added PhyInfo defines for power condition.
- * Added Ethernet configuration pages.
- * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
- * Added SAS PHY Page 4 structure and defines.
- * 02-10-10 02.00.14 Modified the comments for the configuration page
- * structures that contain an array of data. The host
- * should use the "count" field in the page data (e.g. the
- * NumPhys field) to determine the number of valid elements
- * in the array.
- * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
- * Added PowerManagementCapabilities to IO Unit Page 7.
- * Added PortWidthModGroup field to
- * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
- * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
- * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
- * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
- * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
- * define.
- * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
- * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
- * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
- * defines.
- * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
- * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
- * the Pinout field.
- * Added BoardTemperature and BoardTemperatureUnits fields
- * to MPI2_CONFIG_PAGE_IO_UNIT_7.
- * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
- * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
- * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
- * Added IO Unit Page 8, IO Unit Page 9,
- * and IO Unit Page 10.
- * Added SASNotifyPrimitiveMasks field to
- * MPI2_CONFIG_PAGE_IOC_7.
- * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
- * 05-25-11 02.00.20 Cleaned up a few comments.
- * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities
- * for PCIe link as obsolete.
- * Added SpinupFlags field containing a Disable Spin-up
- * bit to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of
- * SAS IO Unit Page 4.
- * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
- * Added UEFIVersion field to BIOS Page 1 and defined new
- * BiosOptions bits.
- * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
- * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
- * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
- * obsolete for MPI v2.5 and later.
- * Added some defines for 12G SAS speeds.
- * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
- * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
- * match the specification.
- * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
- * MPI2_CONFIG_PAGE_MAN_7.
- * Added EnclosureLevel and ConnectorName fields to
- * MPI2_CONFIG_PAGE_SAS_DEV_0.
- * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
- * MPI2_CONFIG_PAGE_SAS_DEV_0.
- * Added EnclosureLevel field to
- * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
- * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- * 01-08-14 02.00.28 Added more defines for the BiosOptions field of
- * MPI2_CONFIG_PAGE_BIOS_1.
- * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
- * more defines for the BiosOptions field.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_CNFG_H
-#define MPI2_CNFG_H
-
-/*****************************************************************************
-* Configuration Page Header and defines
-*****************************************************************************/
-
-/* Config Page Header */
-typedef struct _MPI2_CONFIG_PAGE_HEADER
-{
- U8 PageVersion; /* 0x00 */
- U8 PageLength; /* 0x01 */
- U8 PageNumber; /* 0x02 */
- U8 PageType; /* 0x03 */
-} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER,
- Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t;
-
-typedef union _MPI2_CONFIG_PAGE_HEADER_UNION
-{
- MPI2_CONFIG_PAGE_HEADER Struct;
- U8 Bytes[4];
- U16 Word16[2];
- U32 Word32;
-} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
- Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion;
-
-/* Extended Config Page Header */
-typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER
-{
- U8 PageVersion; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 PageNumber; /* 0x02 */
- U8 PageType; /* 0x03 */
- U16 ExtPageLength; /* 0x04 */
- U8 ExtPageType; /* 0x06 */
- U8 Reserved2; /* 0x07 */
-} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
- MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
- Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t;
-
-typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION
-{
- MPI2_CONFIG_PAGE_HEADER Struct;
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
- U8 Bytes[8];
- U16 Word16[4];
- U32 Word32[2];
-} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
- Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion;
-
-
-/* PageType field values */
-#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00)
-#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10)
-#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20)
-#define MPI2_CONFIG_PAGEATTR_MASK (0xF0)
-
-#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00)
-#define MPI2_CONFIG_PAGETYPE_IOC (0x01)
-#define MPI2_CONFIG_PAGETYPE_BIOS (0x02)
-#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
-#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09)
-#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
-#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F)
-#define MPI2_CONFIG_PAGETYPE_MASK (0x0F)
-
-#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF)
-
-
-/* ExtPageType field values */
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
-#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14)
-#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15)
-#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
-#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
-#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
-#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
-
-
-/*****************************************************************************
-* PageAddress defines
-*****************************************************************************/
-
-/* RAID Volume PageAddress format */
-#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
-#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000)
-
-#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF)
-
-
-/* RAID Physical Disk PageAddress format */
-#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000)
-#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000)
-#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000)
-
-#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
-#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF)
-
-
-/* SAS Expander PageAddress format */
-#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000)
-
-#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF)
-#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000)
-#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
-
-
-/* SAS Device PageAddress format */
-#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
-#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000)
-
-#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
-
-
-/* SAS PHY PageAddress format */
-#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
-#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000)
-
-#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF)
-#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF)
-
-
-/* SAS Port PageAddress format */
-#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
-#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
-
-#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF)
-
-
-/* SAS Enclosure PageAddress format */
-#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
-#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
-
-#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
-
-
-/* RAID Configuration PageAddress format */
-#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000)
-#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000)
-#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000)
-
-#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF)
-
-
-/* Driver Persistent Mapping PageAddress format */
-#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000)
-
-#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000)
-#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16)
-#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
-
-
-/* Ethernet PageAddress format */
-#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
-
-#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
-
-
-
-/****************************************************************************
-* Configuration messages
-****************************************************************************/
-
-/* Configuration Request Message */
-typedef struct _MPI2_CONFIG_REQUEST
-{
- U8 Action; /* 0x00 */
- U8 SGLFlags; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 ExtPageLength; /* 0x04 */
- U8 ExtPageType; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U8 Reserved2; /* 0x0C */
- U8 ProxyVF_ID; /* 0x0D */
- U16 Reserved4; /* 0x0E */
- U32 Reserved3; /* 0x10 */
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */
- U32 PageAddress; /* 0x18 */
- MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */
-} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST,
- Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t;
-
-/* values for the Action field */
-#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00)
-#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
-#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
-#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03)
-#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
-#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
-#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
-#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* Config Reply Message */
-typedef struct _MPI2_CONFIG_REPLY
-{
- U8 Action; /* 0x00 */
- U8 SGLFlags; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 ExtPageLength; /* 0x04 */
- U8 ExtPageType; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U16 Reserved2; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */
-} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY,
- Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t;
-
-
-
-/*****************************************************************************
-*
-* C o n f i g u r a t i o n P a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************
-* Manufacturing Config pages
-****************************************************************************/
-
-#define MPI2_MFGPAGE_VENDORID_LSI (0x1000)
-
-/* SAS */
-#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070)
-#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072)
-#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074)
-#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076)
-#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
-#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
-#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
-
-#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E)
-
-#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
-#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
-#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
-#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
-#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
-#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
-#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
-#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
-#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
-
-
-
-
-/* Manufacturing Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 ChipName[16]; /* 0x04 */
- U8 ChipRevision[8]; /* 0x14 */
- U8 BoardName[16]; /* 0x1C */
- U8 BoardAssembly[16]; /* 0x2C */
- U8 BoardTracerNumber[16]; /* 0x3C */
-} MPI2_CONFIG_PAGE_MAN_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0,
- Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t;
-
-#define MPI2_MANUFACTURING0_PAGEVERSION (0x00)
-
-
-/* Manufacturing Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 VPD[256]; /* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_1,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1,
- Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t;
-
-#define MPI2_MANUFACTURING1_PAGEVERSION (0x00)
-
-
-typedef struct _MPI2_CHIP_REVISION_ID
-{
- U16 DeviceID; /* 0x00 */
- U8 PCIRevisionID; /* 0x02 */
- U8 Reserved; /* 0x03 */
-} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID,
- Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t;
-
-
-/* Manufacturing Page 2 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
-#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_2
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */
- U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_2,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2,
- Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t;
-
-#define MPI2_MANUFACTURING2_PAGEVERSION (0x00)
-
-
-/* Manufacturing Page 3 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
-#define MPI2_MAN_PAGE_3_INFO_WORDS (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_3
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */
- U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_3,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3,
- Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t;
-
-#define MPI2_MANUFACTURING3_PAGEVERSION (0x00)
-
-
-/* Manufacturing Page 4 */
-
-typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS
-{
- U8 PowerSaveFlags; /* 0x00 */
- U8 InternalOperationsSleepTime; /* 0x01 */
- U8 InternalOperationsRunTime; /* 0x02 */
- U8 HostIdleTime; /* 0x03 */
-} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
- MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
- Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t;
-
-/* defines for the PowerSaveFlags field */
-#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03)
-#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00)
-#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01)
-#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02)
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_4
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Flags; /* 0x08 */
- U8 InquirySize; /* 0x0C */
- U8 Reserved2; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- U8 InquiryData[56]; /* 0x10 */
- U32 RAID0VolumeSettings; /* 0x48 */
- U32 RAID1EVolumeSettings; /* 0x4C */
- U32 RAID1VolumeSettings; /* 0x50 */
- U32 RAID10VolumeSettings; /* 0x54 */
- U32 Reserved4; /* 0x58 */
- U32 Reserved5; /* 0x5C */
- MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */
- U8 MaxOCEDisks; /* 0x64 */
- U8 ResyncRate; /* 0x65 */
- U16 DataScrubDuration; /* 0x66 */
- U8 MaxHotSpares; /* 0x68 */
- U8 MaxPhysDisksPerVol; /* 0x69 */
- U8 MaxPhysDisks; /* 0x6A */
- U8 MaxVolumes; /* 0x6B */
-} MPI2_CONFIG_PAGE_MAN_4,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4,
- Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t;
-
-#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A)
-
-/* Manufacturing Page 4 Flags field */
-#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000)
-#define MPI2_MANPAGE4_METADATA_512MB (0x00000000)
-
-#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000)
-#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000)
-#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000)
-
-#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00)
-#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000)
-#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400)
-#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800)
-#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00)
-
-#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300)
-#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000)
-#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100)
-#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200)
-
-#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080)
-#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040)
-#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020)
-#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010)
-#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008)
-#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004)
-#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002)
-#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001)
-
-
-/* Manufacturing Page 5 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
-#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_MANUFACTURING5_ENTRY
-{
- U64 WWID; /* 0x00 */
- U64 DeviceName; /* 0x08 */
-} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY,
- Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_5
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumPhys; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U32 Reserved3; /* 0x08 */
- U32 Reserved4; /* 0x0C */
- MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_5,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5,
- Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t;
-
-#define MPI2_MANUFACTURING5_PAGEVERSION (0x03)
-
-
-/* Manufacturing Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_6
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 ProductSpecificInfo;/* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_6,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6,
- Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t;
-
-#define MPI2_MANUFACTURING6_PAGEVERSION (0x00)
-
-
-/* Manufacturing Page 7 */
-
-typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO
-{
- U32 Pinout; /* 0x00 */
- U8 Connector[16]; /* 0x04 */
- U8 Location; /* 0x14 */
- U8 ReceptacleID; /* 0x15 */
- U16 Slot; /* 0x16 */
- U32 Reserved2; /* 0x18 */
-} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
- Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t;
-
-/* defines for the Pinout field */
-#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00)
-#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8)
-
-#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF)
-#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00)
-#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01)
-#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02)
-#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03)
-#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04)
-#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05)
-#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06)
-#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07)
-#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08)
-#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
-#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
-
-/* defines for the Location field */
-#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
-#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02)
-#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04)
-#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08)
-#define MPI2_MANPAGE7_LOCATION_AUTO (0x10)
-#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
-#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
-#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_7
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U32 Flags; /* 0x0C */
- U8 EnclosureName[16]; /* 0x10 */
- U8 NumPhys; /* 0x20 */
- U8 Reserved3; /* 0x21 */
- U16 Reserved4; /* 0x22 */
- MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */
-} MPI2_CONFIG_PAGE_MAN_7,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7,
- Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t;
-
-#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
-
-/* defines for the Flags field */
-#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008)
-#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
-#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
-
-
-/*
- * Generic structure to use for product-specific manufacturing pages
- * (currently Manufacturing Page 8 through Manufacturing Page 31).
- */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_PS
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 ProductSpecificInfo;/* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_PS,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS,
- Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t;
-
-#define MPI2_MANUFACTURING8_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING9_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING10_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING11_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING12_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING13_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING14_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING15_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING16_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING17_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING18_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING19_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING20_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING21_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING22_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING23_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING24_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING25_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING26_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING27_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING28_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING29_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING30_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING31_PAGEVERSION (0x00)
-
-
-/****************************************************************************
-* IO Unit Config Pages
-****************************************************************************/
-
-/* IO Unit Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U64 UniqueValue; /* 0x04 */
- MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */
- MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */
-} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
- Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t;
-
-#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02)
-
-
-/* IO Unit Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Flags; /* 0x04 */
-} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
- Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t;
-
-#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
-
-/* IO Unit Page 1 Flags defines */
-#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
-#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
-#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
-#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9)
-#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
-#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
-#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400)
-#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
-#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040)
-#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
-#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
-
-
-/* IO Unit Page 3 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for GPIOCount at runtime.
- */
-#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
-#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 GPIOCount; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */
-} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
- Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t;
-
-#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01)
-
-/* defines for IO Unit Page 3 GPIOVal field */
-#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC)
-#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
-#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000)
-#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
-
-
-/* IO Unit Page 5 */
-
-/*
- * Upper layer code (drivers, utilities, etc.) should leave this define set to
- * one and check the value returned for NumDmaEngines at runtime.
- */
-#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
-#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */
- U64 RaidAcceleratorBufferSize; /* 0x0C */
- U64 RaidAcceleratorControlBaseAddress; /* 0x14 */
- U8 RAControlSize; /* 0x1C */
- U8 NumDmaEngines; /* 0x1D */
- U8 RAMinControlSize; /* 0x1E */
- U8 RAMaxControlSize; /* 0x1F */
- U32 Reserved1; /* 0x20 */
- U32 Reserved2; /* 0x24 */
- U32 Reserved3; /* 0x28 */
- U32 DmaEngineCapabilities
- [MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */
-} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
- Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t;
-
-#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
-
-/* defines for IO Unit Page 5 DmaEngineCapabilities field */
-#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000)
-#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
-
-#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
-#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
-#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
-#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
-
-
-/* IO Unit Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 Flags; /* 0x04 */
- U8 RAHostControlSize; /* 0x06 */
- U8 Reserved0; /* 0x07 */
- U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
- U32 Reserved3; /* 0x18 */
-} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
- Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t;
-
-#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
-
-/* defines for IO Unit Page 6 Flags field */
-#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
-
-
-/* IO Unit Page 7 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 Reserved1; /* 0x04 */
- U8 PCIeWidth; /* 0x06 */
- U8 PCIeSpeed; /* 0x07 */
- U32 ProcessorState; /* 0x08 */
- U32 PowerManagementCapabilities; /* 0x0C */
- U16 IOCTemperature; /* 0x10 */
- U8 IOCTemperatureUnits; /* 0x12 */
- U8 IOCSpeed; /* 0x13 */
- U16 BoardTemperature; /* 0x14 */
- U8 BoardTemperatureUnits; /* 0x16 */
- U8 Reserved3; /* 0x17 */
- U32 Reserved4; /* 0x18 */
- U32 Reserved5; /* 0x1C */
- U32 Reserved6; /* 0x20 */
- U32 Reserved7; /* 0x24 */
-} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
- Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
-
-#define MPI2_IOUNITPAGE7_PAGEVERSION (0x04)
-
-/* defines for IO Unit Page 7 PCIeWidth field */
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
-
-/* defines for IO Unit Page 7 PCIeSpeed field */
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
-
-/* defines for IO Unit Page 7 ProcessorState field */
-#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
-#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
-
-#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
-#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
-#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
-
-/* defines for IO Unit Page 7 PowerManagementCapabilities field */
-#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
-#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
-#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
-#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /* obsolete */
-#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /* obsolete */
-
-/* defines for IO Unit Page 7 IOCTemperatureUnits field */
-#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
-#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
-#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
-
-/* defines for IO Unit Page 7 IOCSpeed field */
-#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
-
-/* defines for IO Unit Page 7 BoardTemperatureUnits field */
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00)
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
-
-/* IO Unit Page 8 */
-
-#define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
-
-typedef struct _MPI2_IOUNIT8_SENSOR {
- U16 Flags; /* 0x00 */
- U16 Reserved1; /* 0x02 */
- U16
- Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */
- U32 Reserved2; /* 0x0C */
- U32 Reserved3; /* 0x10 */
- U32 Reserved4; /* 0x14 */
-} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR,
-Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t;
-
-/* defines for IO Unit Page 8 Sensor Flags field */
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumSensors at runtime.
- */
-#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
-#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U8 NumSensors; /* 0x0C */
- U8 PollingInterval; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_IOUNIT8_SENSOR
- Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
-Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t;
-
-#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
-
-
-/* IO Unit Page 9 */
-
-typedef struct _MPI2_IOUNIT9_SENSOR {
- U16 CurrentTemperature; /* 0x00 */
- U16 Reserved1; /* 0x02 */
- U8 Flags; /* 0x04 */
- U8 Reserved2; /* 0x05 */
- U16 Reserved3; /* 0x06 */
- U32 Reserved4; /* 0x08 */
- U32 Reserved5; /* 0x0C */
-} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR,
-Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t;
-
-/* defines for IO Unit Page 9 Sensor Flags field */
-#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumSensors at runtime.
- */
-#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
-#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U8 NumSensors; /* 0x0C */
- U8 Reserved4; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_IOUNIT9_SENSOR
- Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
-Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t;
-
-#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
-
-
-/* IO Unit Page 10 */
-
-typedef struct _MPI2_IOUNIT10_FUNCTION {
- U8 CreditPercent; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
-} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION,
-Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumFunctions at runtime.
- */
-#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
-#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumFunctions; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U32 Reserved3; /* 0x08 */
- U32 Reserved4; /* 0x0C */
- MPI2_IOUNIT10_FUNCTION
- Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
-Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t;
-
-#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
-
-
-
-/****************************************************************************
-* IOC Config Pages
-****************************************************************************/
-
-/* IOC Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U16 VendorID; /* 0x0C */
- U16 DeviceID; /* 0x0E */
- U8 RevisionID; /* 0x10 */
- U8 Reserved3; /* 0x11 */
- U16 Reserved4; /* 0x12 */
- U32 ClassCode; /* 0x14 */
- U16 SubsystemVendorID; /* 0x18 */
- U16 SubsystemID; /* 0x1A */
-} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0,
- Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t;
-
-#define MPI2_IOCPAGE0_PAGEVERSION (0x02)
-
-
-/* IOC Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Flags; /* 0x04 */
- U32 CoalescingTimeout; /* 0x08 */
- U8 CoalescingDepth; /* 0x0C */
- U8 PCISlotNum; /* 0x0D */
- U8 PCIBusNum; /* 0x0E */
- U8 PCIDomainSegment; /* 0x0F */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
-} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1,
- Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t;
-
-#define MPI2_IOCPAGE1_PAGEVERSION (0x05)
-
-/* defines for IOC Page 1 Flags field */
-#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001)
-
-#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
-#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF)
-#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF)
-
-/* IOC Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_6
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 CapabilitiesFlags; /* 0x04 */
- U8 MaxDrivesRAID0; /* 0x08 */
- U8 MaxDrivesRAID1; /* 0x09 */
- U8 MaxDrivesRAID1E; /* 0x0A */
- U8 MaxDrivesRAID10; /* 0x0B */
- U8 MinDrivesRAID0; /* 0x0C */
- U8 MinDrivesRAID1; /* 0x0D */
- U8 MinDrivesRAID1E; /* 0x0E */
- U8 MinDrivesRAID10; /* 0x0F */
- U32 Reserved1; /* 0x10 */
- U8 MaxGlobalHotSpares; /* 0x14 */
- U8 MaxPhysDisks; /* 0x15 */
- U8 MaxVolumes; /* 0x16 */
- U8 MaxConfigs; /* 0x17 */
- U8 MaxOCEDisks; /* 0x18 */
- U8 Reserved2; /* 0x19 */
- U16 Reserved3; /* 0x1A */
- U32 SupportedStripeSizeMapRAID0; /* 0x1C */
- U32 SupportedStripeSizeMapRAID1E; /* 0x20 */
- U32 SupportedStripeSizeMapRAID10; /* 0x24 */
- U32 Reserved4; /* 0x28 */
- U32 Reserved5; /* 0x2C */
- U16 DefaultMetadataSize; /* 0x30 */
- U16 Reserved6; /* 0x32 */
- U16 MaxBadBlockTableEntries; /* 0x34 */
- U16 Reserved7; /* 0x36 */
- U32 IRNvsramVersion; /* 0x38 */
-} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6,
- Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t;
-
-#define MPI2_IOCPAGE6_PAGEVERSION (0x05)
-
-/* defines for IOC Page 6 CapabilitiesFlags */
-#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002)
-#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
-
-
-/* IOC Page 7 */
-
-#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4)
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_7
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
- U16 SASBroadcastPrimitiveMasks; /* 0x18 */
- U16 SASNotifyPrimitiveMasks; /* 0x1A */
- U32 Reserved3; /* 0x1C */
-} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
- Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;
-
-#define MPI2_IOCPAGE7_PAGEVERSION (0x02)
-
-
-/* IOC Page 8 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_8
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumDevsPerEnclosure; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U16 MaxPersistentEntries; /* 0x08 */
- U16 MaxNumPhysicalMappedIDs; /* 0x0A */
- U16 Flags; /* 0x0C */
- U16 Reserved3; /* 0x0E */
- U16 IRVolumeMappingFlags; /* 0x10 */
- U16 Reserved4; /* 0x12 */
- U32 Reserved5; /* 0x14 */
-} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8,
- Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t;
-
-#define MPI2_IOCPAGE8_PAGEVERSION (0x00)
-
-/* defines for IOC Page 8 Flags field */
-#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020)
-#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010)
-
-#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E)
-#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000)
-#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002)
-
-#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001)
-#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000)
-
-/* defines for IOC Page 8 IRVolumeMappingFlags */
-#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003)
-#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000)
-#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001)
-
-
-/****************************************************************************
-* BIOS Config Pages
-****************************************************************************/
-
-/* BIOS Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 BiosOptions; /* 0x04 */
- U32 IOCSettings; /* 0x08 */
- U8 SSUTimeout; /* 0x0C */
- U8 Reserved1; /* 0x0D */
- U16 Reserved2; /* 0x0E */
- U32 DeviceSettings; /* 0x10 */
- U16 NumberOfDevices; /* 0x14 */
- U16 UEFIVersion; /* 0x16 */
- U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */
- U16 IOTimeoutSequential; /* 0x1A */
- U16 IOTimeoutOther; /* 0x1C */
- U16 IOTimeoutBlockDevicesRM; /* 0x1E */
-} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1,
- Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t;
-
-#define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
-
-/* values for BIOS Page 1 BiosOptions field */
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000)
-
-#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300)
-#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100)
-#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200)
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
-#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
-#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
-#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004)
-
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
-
-/* values for BIOS Page 1 IOCSettings field */
-#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
-#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
-
-#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
-#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
-#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
-
-#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
-#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
-#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
-#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
-
-#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
-
-/* values for BIOS Page 1 DeviceSettings field */
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
-
-/* defines for BIOS Page 1 UEFIVersion field */
-#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00)
-#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8)
-#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF)
-#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0)
-
-
-
-/* BIOS Page 2 */
-
-typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER
-{
- U32 Reserved1; /* 0x00 */
- U32 Reserved2; /* 0x04 */
- U32 Reserved3; /* 0x08 */
- U32 Reserved4; /* 0x0C */
- U32 Reserved5; /* 0x10 */
- U32 Reserved6; /* 0x14 */
-} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
- MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
- Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t;
-
-typedef struct _MPI2_BOOT_DEVICE_SAS_WWID
-{
- U64 SASAddress; /* 0x00 */
- U8 LUN[8]; /* 0x08 */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
-} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID,
- Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t;
-
-typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT
-{
- U64 EnclosureLogicalID; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
- U16 SlotNumber; /* 0x10 */
- U16 Reserved3; /* 0x12 */
- U32 Reserved4; /* 0x14 */
-} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
- MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
- Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t;
-
-typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME
-{
- U64 DeviceName; /* 0x00 */
- U8 LUN[8]; /* 0x08 */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
-} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
- Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t;
-
-typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE
-{
- MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder;
- MPI2_BOOT_DEVICE_SAS_WWID SasWwid;
- MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
- MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName;
-} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
- Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t;
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_2
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U32 Reserved3; /* 0x0C */
- U32 Reserved4; /* 0x10 */
- U32 Reserved5; /* 0x14 */
- U32 Reserved6; /* 0x18 */
- U8 ReqBootDeviceForm; /* 0x1C */
- U8 Reserved7; /* 0x1D */
- U16 Reserved8; /* 0x1E */
- MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */
- U8 ReqAltBootDeviceForm; /* 0x38 */
- U8 Reserved9; /* 0x39 */
- U16 Reserved10; /* 0x3A */
- MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */
- U8 CurrentBootDeviceForm; /* 0x58 */
- U8 Reserved11; /* 0x59 */
- U16 Reserved12; /* 0x5A */
- MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */
-} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2,
- Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t;
-
-#define MPI2_BIOSPAGE2_PAGEVERSION (0x04)
-
-/* values for BIOS Page 2 BootDeviceForm fields */
-#define MPI2_BIOSPAGE2_FORM_MASK (0x0F)
-#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00)
-#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05)
-#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
-#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07)
-
-
-/* BIOS Page 3 */
-
-typedef struct _MPI2_ADAPTER_INFO
-{
- U8 PciBusNumber; /* 0x00 */
- U8 PciDeviceAndFunctionNumber; /* 0x01 */
- U16 AdapterFlags; /* 0x02 */
-} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO,
- Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t;
-
-#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
-#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_3
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 GlobalFlags; /* 0x04 */
- U32 BiosVersion; /* 0x08 */
- MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */
- U32 Reserved1; /* 0x1C */
-} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3,
- Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t;
-
-#define MPI2_BIOSPAGE3_PAGEVERSION (0x00)
-
-/* values for BIOS Page 3 GlobalFlags */
-#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
-#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004)
-#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010)
-
-#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
-#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
-#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020)
-#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
-
-
-/* BIOS Page 4 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
-#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_BIOS4_ENTRY
-{
- U64 ReassignmentWWID; /* 0x00 */
- U64 ReassignmentDeviceName; /* 0x08 */
-} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY,
- Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_4
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumPhys; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */
-} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4,
- Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t;
-
-#define MPI2_BIOSPAGE4_PAGEVERSION (0x01)
-
-
-/****************************************************************************
-* RAID Volume Config Pages
-****************************************************************************/
-
-/* RAID Volume Page 0 */
-
-typedef struct _MPI2_RAIDVOL0_PHYS_DISK
-{
- U8 RAIDSetNum; /* 0x00 */
- U8 PhysDiskMap; /* 0x01 */
- U8 PhysDiskNum; /* 0x02 */
- U8 Reserved; /* 0x03 */
-} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK,
- Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t;
-
-/* defines for the PhysDiskMap field */
-#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
-#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
-
-typedef struct _MPI2_RAIDVOL0_SETTINGS
-{
- U16 Settings; /* 0x00 */
- U8 HotSparePool; /* 0x01 */
- U8 Reserved; /* 0x02 */
-} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS,
- Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t;
-
-/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
-#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01)
-#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02)
-#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04)
-#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08)
-#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10)
-#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20)
-#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40)
-#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80)
-
-/* RAID Volume Page 0 VolumeSettings defines */
-#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008)
-#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
-
-#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003)
-#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000)
-#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001)
-#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhysDisks at runtime.
- */
-#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
-#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 DevHandle; /* 0x04 */
- U8 VolumeState; /* 0x06 */
- U8 VolumeType; /* 0x07 */
- U32 VolumeStatusFlags; /* 0x08 */
- MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */
- U64 MaxLBA; /* 0x10 */
- U32 StripeSize; /* 0x18 */
- U16 BlockSize; /* 0x1C */
- U16 Reserved1; /* 0x1E */
- U8 SupportedPhysDisks; /* 0x20 */
- U8 ResyncRate; /* 0x21 */
- U16 DataScrubDuration; /* 0x22 */
- U8 NumPhysDisks; /* 0x24 */
- U8 Reserved2; /* 0x25 */
- U8 Reserved3; /* 0x26 */
- U8 InactiveStatus; /* 0x27 */
- MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */
-} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
- Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t;
-
-#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A)
-
-/* values for RAID VolumeState */
-#define MPI2_RAID_VOL_STATE_MISSING (0x00)
-#define MPI2_RAID_VOL_STATE_FAILED (0x01)
-#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02)
-#define MPI2_RAID_VOL_STATE_ONLINE (0x03)
-#define MPI2_RAID_VOL_STATE_DEGRADED (0x04)
-#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05)
-
-/* values for RAID VolumeType */
-#define MPI2_RAID_VOL_TYPE_RAID0 (0x00)
-#define MPI2_RAID_VOL_TYPE_RAID1E (0x01)
-#define MPI2_RAID_VOL_TYPE_RAID1 (0x02)
-#define MPI2_RAID_VOL_TYPE_RAID10 (0x05)
-#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF)
-
-/* values for RAID Volume Page 0 VolumeStatusFlags field */
-#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080)
-#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020)
-#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008)
-#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004)
-#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002)
-#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001)
-
-/* values for RAID Volume Page 0 SupportedPhysDisks field */
-#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08)
-#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04)
-#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02)
-#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01)
-
-/* values for RAID Volume Page 0 InactiveStatus field */
-#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
-#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01)
-#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02)
-#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
-#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04)
-#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
-#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06)
-
-
-/* RAID Volume Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 DevHandle; /* 0x04 */
- U16 Reserved0; /* 0x06 */
- U8 GUID[24]; /* 0x08 */
- U8 Name[16]; /* 0x20 */
- U64 WWID; /* 0x30 */
- U32 Reserved1; /* 0x38 */
- U32 Reserved2; /* 0x3C */
-} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
- Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t;
-
-#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03)
-
-
-/****************************************************************************
-* RAID Physical Disk Config Pages
-****************************************************************************/
-
-/* RAID Physical Disk Page 0 */
-
-typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS
-{
- U16 Reserved1; /* 0x00 */
- U8 HotSparePool; /* 0x02 */
- U8 Reserved2; /* 0x03 */
-} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
- Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t;
-
-/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
-
-typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA
-{
- U8 VendorID[8]; /* 0x00 */
- U8 ProductID[16]; /* 0x08 */
- U8 ProductRevLevel[4]; /* 0x18 */
- U8 SerialNum[32]; /* 0x1C */
-} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
- MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
- Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t;
-
-typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 DevHandle; /* 0x04 */
- U8 Reserved1; /* 0x06 */
- U8 PhysDiskNum; /* 0x07 */
- MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */
- U32 Reserved2; /* 0x0C */
- MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */
- U32 Reserved3; /* 0x4C */
- U8 PhysDiskState; /* 0x50 */
- U8 OfflineReason; /* 0x51 */
- U8 IncompatibleReason; /* 0x52 */
- U8 PhysDiskAttributes; /* 0x53 */
- U32 PhysDiskStatusFlags; /* 0x54 */
- U64 DeviceMaxLBA; /* 0x58 */
- U64 HostMaxLBA; /* 0x60 */
- U64 CoercedMaxLBA; /* 0x68 */
- U16 BlockSize; /* 0x70 */
- U16 Reserved5; /* 0x72 */
- U32 Reserved6; /* 0x74 */
-} MPI2_CONFIG_PAGE_RD_PDISK_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
- Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t;
-
-#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05)
-
-/* PhysDiskState defines */
-#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00)
-#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01)
-#define MPI2_RAID_PD_STATE_OFFLINE (0x02)
-#define MPI2_RAID_PD_STATE_ONLINE (0x03)
-#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04)
-#define MPI2_RAID_PD_STATE_DEGRADED (0x05)
-#define MPI2_RAID_PD_STATE_REBUILDING (0x06)
-#define MPI2_RAID_PD_STATE_OPTIMAL (0x07)
-
-/* OfflineReason defines */
-#define MPI2_PHYSDISK0_ONLINE (0x00)
-#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01)
-#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03)
-#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04)
-#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05)
-#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06)
-#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF)
-
-/* IncompatibleReason defines */
-#define MPI2_PHYSDISK0_COMPATIBLE (0x00)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF)
-
-/* PhysDiskAttributes defines */
-#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C)
-#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08)
-#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04)
-
-#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03)
-#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02)
-#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01)
-
-/* PhysDiskStatusFlags defines */
-#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020)
-#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000)
-#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
-#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004)
-#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001)
-
-
-/* RAID Physical Disk Page 1 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhysDiskPaths at runtime.
- */
-#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
-#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
-#endif
-
-typedef struct _MPI2_RAIDPHYSDISK1_PATH
-{
- U16 DevHandle; /* 0x00 */
- U16 Reserved1; /* 0x02 */
- U64 WWID; /* 0x04 */
- U64 OwnerWWID; /* 0x0C */
- U8 OwnerIdentifier; /* 0x14 */
- U8 Reserved2; /* 0x15 */
- U16 Flags; /* 0x16 */
-} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH,
- Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t;
-
-/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
-#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004)
-#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
-#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
-
-typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumPhysDiskPaths; /* 0x04 */
- U8 PhysDiskNum; /* 0x05 */
- U16 Reserved1; /* 0x06 */
- U32 Reserved2; /* 0x08 */
- MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */
-} MPI2_CONFIG_PAGE_RD_PDISK_1,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
- Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t;
-
-#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02)
-
-
-/****************************************************************************
-* values for fields used by several types of SAS Config Pages
-****************************************************************************/
-
-/* values for NegotiatedLinkRates fields */
-#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0)
-#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4)
-#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
-/* link rates used for Negotiated Physical and Logical Link Rate */
-#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
-#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
-#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
-#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
-#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
-#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
-#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
-#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08)
-#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
-#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
-
-
-/* values for AttachedPhyInfo fields */
-#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
-#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
-#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
-
-#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F)
-#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
-#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
-#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
-#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
-#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
-#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
-#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
-#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
-#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
-
-
-/* values for PhyInfo fields */
-#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
-
-#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
-#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27)
-#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
-#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
-#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
-
-#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
-#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
-#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
-#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000)
-#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000)
-#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000)
-
-#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000)
-#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
-#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
-#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
-#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
-#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
-#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
-#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
-#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
-#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
-
-#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000)
-#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
-#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
-#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
-
-#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00)
-#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8)
-
-#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0)
-#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000)
-#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010)
-#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020)
-
-
-/* values for SAS ProgrammedLinkRate fields */
-#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0)
-#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
-#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
-#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
-#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
-#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
-#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
-#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
-#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
-#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
-#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
-
-
-/* values for SAS HwLinkRate fields */
-#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0)
-#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
-#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
-#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
-#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
-#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
-#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
-#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
-#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
-
-
-
-/****************************************************************************
-* SAS IO Unit Config Pages
-****************************************************************************/
-
-/* SAS IO Unit Page 0 */
-
-typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA
-{
- U8 Port; /* 0x00 */
- U8 PortFlags; /* 0x01 */
- U8 PhyFlags; /* 0x02 */
- U8 NegotiatedLinkRate; /* 0x03 */
- U32 ControllerPhyDeviceInfo;/* 0x04 */
- U16 AttachedDevHandle; /* 0x08 */
- U16 ControllerDevHandle; /* 0x0A */
- U32 DiscoveryStatus; /* 0x0C */
- U32 Reserved; /* 0x10 */
-} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
- Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
-#define MPI2_SAS_IOUNIT0_PHY_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U8 NumPhys; /* 0x0C */
- U8 Reserved2; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
- Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t;
-
-#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05)
-
-/* values for SAS IO Unit Page 0 PortFlags */
-#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08)
-#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
-
-/* values for SAS IO Unit Page 0 PhyFlags */
-#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10)
-#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
-
-/* values for SAS IO Unit Page 0 DiscoveryStatus */
-#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
-#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
-#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000)
-#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
-#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000)
-#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
-#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
-#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000)
-#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
-#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
-#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400)
-#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
-#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100)
-#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080)
-#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040)
-#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020)
-#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010)
-#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004)
-#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002)
-#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001)
-
-
-/* SAS IO Unit Page 1 */
-
-typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA
-{
- U8 Port; /* 0x00 */
- U8 PortFlags; /* 0x01 */
- U8 PhyFlags; /* 0x02 */
- U8 MaxMinLinkRate; /* 0x03 */
- U32 ControllerPhyDeviceInfo; /* 0x04 */
- U16 MaxTargetPortConnectTime; /* 0x08 */
- U16 Reserved1; /* 0x0A */
-} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
- Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
-#define MPI2_SAS_IOUNIT1_PHY_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U16 ControlFlags; /* 0x08 */
- U16 SASNarrowMaxQueueDepth; /* 0x0A */
- U16 AdditionalControlFlags; /* 0x0C */
- U16 SASWideMaxQueueDepth; /* 0x0E */
- U8 NumPhys; /* 0x10 */
- U8 SATAMaxQDepth; /* 0x11 */
- U8 ReportDeviceMissingDelay; /* 0x12 */
- U8 IODeviceMissingDelay; /* 0x13 */
- MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_1,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
- Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t;
-
-#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09)
-
-/* values for SAS IO Unit Page 1 ControlFlags */
-#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
-
-#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
-#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2)
-
-#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
-#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
-#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
-#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
-#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
-
-/* values for SAS IO Unit Page 1 AdditionalControlFlags */
-#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
-#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
-#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
-#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
-#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
-#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
-#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
-#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
-
-/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
-#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
-#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80)
-
-/* values for SAS IO Unit Page 1 PortFlags */
-#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
-
-/* values for SAS IO Unit Page 1 PhyFlags */
-#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
-#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
-
-/* values for SAS IO Unit Page 1 MaxMinLinkRate */
-#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
-#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
-#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
-#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
-#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
-#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
-#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
-#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
-
-/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
-
-
-/* SAS IO Unit Page 4 */
-
-typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP
-{
- U8 MaxTargetSpinup; /* 0x00 */
- U8 SpinupDelay; /* 0x01 */
- U8 SpinupFlags; /* 0x02 */
- U8 Reserved1; /* 0x03 */
-} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
- Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t;
-
-/* defines for SAS IO Unit Page 4 SpinupFlags */
-#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
-#define MPI2_SAS_IOUNIT4_PHY_MAX (4)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */
- U32 Reserved1; /* 0x18 */
- U32 Reserved2; /* 0x1C */
- U32 Reserved3; /* 0x20 */
- U8 BootDeviceWaitTime; /* 0x24 */
- U8 Reserved4; /* 0x25 */
- U16 Reserved5; /* 0x26 */
- U8 NumPhys; /* 0x28 */
- U8 PEInitialSpinupDelay; /* 0x29 */
- U8 PEReplyDelay; /* 0x2A */
- U8 Flags; /* 0x2B */
- U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */
-} MPI2_CONFIG_PAGE_SASIOUNIT_4,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
- Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t;
-
-#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02)
-
-/* defines for Flags field */
-#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01)
-
-/* defines for PHY field */
-#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
-
-
-/* SAS IO Unit Page 5 */
-
-typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
- U8 ControlFlags; /* 0x00 */
- U8 PortWidthModGroup; /* 0x01 */
- U16 InactivityTimerExponent; /* 0x02 */
- U8 SATAPartialTimeout; /* 0x04 */
- U8 Reserved2; /* 0x05 */
- U8 SATASlumberTimeout; /* 0x06 */
- U8 Reserved3; /* 0x07 */
- U8 SASPartialTimeout; /* 0x08 */
- U8 Reserved4; /* 0x09 */
- U8 SASSlumberTimeout; /* 0x0A */
- U8 Reserved5; /* 0x0B */
-} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
- MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
- Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t;
-
-/* defines for ControlFlags field */
-#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
-#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
-#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
-#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
-
-/* defines for PortWidthModeGroup field */
-#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
-
-/* defines for InactivityTimerExponent field */
-#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
-#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
-#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
-#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
-
-#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
-#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
-#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
-#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
-#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
-#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
-#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
-#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
-#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 NumPhys; /* 0x08 */
- U8 Reserved1; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U32 Reserved3; /* 0x0C */
- MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings
- [MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_5,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
- Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
-
-#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
-
-
-/* SAS IO Unit Page 6 */
-
-typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
- U8 CurrentStatus; /* 0x00 */
- U8 CurrentModulation; /* 0x01 */
- U8 CurrentUtilization; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 Reserved2; /* 0x04 */
-} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
- MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
- Mpi2SasIOUnit6PortWidthModGroupStatus_t,
- MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t;
-
-/* defines for CurrentStatus field */
-#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
-#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
-#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
-#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
-#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
-#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
-#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
-#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
-
-/* defines for CurrentModulation field */
-#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
-#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
-#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
-#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumGroups at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
-#define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
- U8 NumGroups; /* 0x10 */
- U8 Reserved3; /* 0x11 */
- U16 Reserved4; /* 0x12 */
- MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
- PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_6,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
- Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t;
-
-#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
-
-
-/* SAS IO Unit Page 7 */
-
-typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
- U8 Flags; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U8 Threshold75Pct; /* 0x04 */
- U8 Threshold50Pct; /* 0x05 */
- U8 Threshold25Pct; /* 0x06 */
- U8 Reserved3; /* 0x07 */
-} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
- MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
- Mpi2SasIOUnit7PortWidthModGroupSettings_t,
- MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t;
-
-/* defines for Flags field */
-#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumGroups at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
-#define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 SamplingInterval; /* 0x08 */
- U8 WindowLength; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U32 Reserved2; /* 0x0C */
- U32 Reserved3; /* 0x10 */
- U8 NumGroups; /* 0x14 */
- U8 Reserved4; /* 0x15 */
- U16 Reserved5; /* 0x16 */
- MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
- PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_7,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
- Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t;
-
-#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
-
-
-/* SAS IO Unit Page 8 */
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 PowerManagementCapabilities;/* 0x0C */
- U32 Reserved2; /* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_8,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
- Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t;
-
-#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
-
-/* defines for PowerManagementCapabilities field */
-#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
-
-
-
-/* SAS IO Unit Page 16 */
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U64 TimeStamp; /* 0x08 */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
- U32 FastPathPendedRequests; /* 0x18 */
- U32 FastPathUnPendedRequests; /* 0x1C */
- U32 FastPathHostRequestStarts; /* 0x20 */
- U32 FastPathFirmwareRequestStarts; /* 0x24 */
- U32 FastPathHostCompletions; /* 0x28 */
- U32 FastPathFirmwareCompletions; /* 0x2C */
- U32 NonFastPathRequestStarts; /* 0x30 */
- U32 NonFastPathHostCompletions; /* 0x30 */
-} MPI2_CONFIG_PAGE_SASIOUNIT16,
-MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
-Mpi2SasIOUnitPage16_t, MPI2_POINTER pMpi2SasIOUnitPage16_t;
-
-#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00)
-
-
-/****************************************************************************
-* SAS Expander Config Pages
-****************************************************************************/
-
-/* SAS Expander Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 PhysicalPort; /* 0x08 */
- U8 ReportGenLength; /* 0x09 */
- U16 EnclosureHandle; /* 0x0A */
- U64 SASAddress; /* 0x0C */
- U32 DiscoveryStatus; /* 0x14 */
- U16 DevHandle; /* 0x18 */
- U16 ParentDevHandle; /* 0x1A */
- U16 ExpanderChangeCount; /* 0x1C */
- U16 ExpanderRouteIndexes; /* 0x1E */
- U8 NumPhys; /* 0x20 */
- U8 SASLevel; /* 0x21 */
- U16 Flags; /* 0x22 */
- U16 STPBusInactivityTimeLimit; /* 0x24 */
- U16 STPMaxConnectTimeLimit; /* 0x26 */
- U16 STP_SMP_NexusLossTime; /* 0x28 */
- U16 MaxNumRoutedSasAddresses; /* 0x2A */
- U64 ActiveZoneManagerSASAddress;/* 0x2C */
- U16 ZoneLockInactivityLimit; /* 0x34 */
- U16 Reserved1; /* 0x36 */
- U8 TimeToReducedFunc; /* 0x38 */
- U8 InitialTimeToReducedFunc; /* 0x39 */
- U8 MaxReducedFuncTime; /* 0x3A */
- U8 Reserved2; /* 0x3B */
-} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
- Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t;
-
-#define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
-
-/* values for SAS Expander Page 0 DiscoveryStatus field */
-#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
-#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000)
-#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
-#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
-#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000)
-#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
-#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800)
-#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400)
-#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200)
-#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100)
-#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080)
-#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040)
-#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020)
-#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010)
-#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004)
-#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002)
-#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
-
-/* values for SAS Expander Page 0 Flags field */
-#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
-#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
-#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
-#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
-#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
-#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
-#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
-#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
-#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
-#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
-#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
-
-
-/* SAS Expander Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 PhysicalPort; /* 0x08 */
- U8 Reserved1; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U8 NumPhys; /* 0x0C */
- U8 Phy; /* 0x0D */
- U16 NumTableEntriesProgrammed; /* 0x0E */
- U8 ProgrammedLinkRate; /* 0x10 */
- U8 HwLinkRate; /* 0x11 */
- U16 AttachedDevHandle; /* 0x12 */
- U32 PhyInfo; /* 0x14 */
- U32 AttachedDeviceInfo; /* 0x18 */
- U16 ExpanderDevHandle; /* 0x1C */
- U8 ChangeCount; /* 0x1E */
- U8 NegotiatedLinkRate; /* 0x1F */
- U8 PhyIdentifier; /* 0x20 */
- U8 AttachedPhyIdentifier; /* 0x21 */
- U8 Reserved3; /* 0x22 */
- U8 DiscoveryInfo; /* 0x23 */
- U32 AttachedPhyInfo; /* 0x24 */
- U8 ZoneGroup; /* 0x28 */
- U8 SelfConfigStatus; /* 0x29 */
- U16 Reserved4; /* 0x2A */
-} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
- Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t;
-
-#define MPI2_SASEXPANDER1_PAGEVERSION (0x02)
-
-/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
-
-/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
-
-/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */
-
-/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-/* values for SAS Expander Page 1 DiscoveryInfo field */
-#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
-#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
-#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
-
-/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
-
-/****************************************************************************
-* SAS Device Config Pages
-****************************************************************************/
-
-/* SAS Device Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U16 Slot; /* 0x08 */
- U16 EnclosureHandle; /* 0x0A */
- U64 SASAddress; /* 0x0C */
- U16 ParentDevHandle; /* 0x14 */
- U8 PhyNum; /* 0x16 */
- U8 AccessStatus; /* 0x17 */
- U16 DevHandle; /* 0x18 */
- U8 AttachedPhyIdentifier; /* 0x1A */
- U8 ZoneGroup; /* 0x1B */
- U32 DeviceInfo; /* 0x1C */
- U16 Flags; /* 0x20 */
- U8 PhysicalPort; /* 0x22 */
- U8 MaxPortConnections; /* 0x23 */
- U64 DeviceName; /* 0x24 */
- U8 PortGroups; /* 0x2C */
- U8 DmaGroup; /* 0x2D */
- U8 ControlGroup; /* 0x2E */
- U8 EnclosureLevel; /* 0x2F */
- U8 ConnectorName[4]; /* 0x30 */
- U32 Reserved3; /* 0x34 */
-} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
- Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t;
-
-#define MPI2_SASDEVICE0_PAGEVERSION (0x09)
-
-/* values for SAS Device Page 0 AccessStatus field */
-#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
-#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05)
-#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06)
-#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07)
-/* specific values for SATA Init failures */
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
-
-/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
-
-/* values for SAS Device Page 0 Flags field */
-#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
-#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
-#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
-#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
-#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
-#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002)
-#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
-
-
-/* SAS Device Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U64 SASAddress; /* 0x0C */
- U32 Reserved2; /* 0x14 */
- U16 DevHandle; /* 0x18 */
- U16 Reserved3; /* 0x1A */
- U8 InitialRegDeviceFIS[20];/* 0x1C */
-} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
- Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t;
-
-#define MPI2_SASDEVICE1_PAGEVERSION (0x01)
-
-
-/****************************************************************************
-* SAS PHY Config Pages
-****************************************************************************/
-
-/* SAS PHY Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U16 OwnerDevHandle; /* 0x08 */
- U16 Reserved1; /* 0x0A */
- U16 AttachedDevHandle; /* 0x0C */
- U8 AttachedPhyIdentifier; /* 0x0E */
- U8 Reserved2; /* 0x0F */
- U32 AttachedPhyInfo; /* 0x10 */
- U8 ProgrammedLinkRate; /* 0x14 */
- U8 HwLinkRate; /* 0x15 */
- U8 ChangeCount; /* 0x16 */
- U8 Flags; /* 0x17 */
- U32 PhyInfo; /* 0x18 */
- U8 NegotiatedLinkRate; /* 0x1C */
- U8 Reserved3; /* 0x1D */
- U16 Reserved4; /* 0x1E */
-} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
- Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t;
-
-#define MPI2_SASPHY0_PAGEVERSION (0x03)
-
-/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
-
-/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
-
-/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
-
-/* values for SAS PHY Page 0 Flags field */
-#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
-
-/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-
-/* SAS PHY Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 InvalidDwordCount; /* 0x0C */
- U32 RunningDisparityErrorCount; /* 0x10 */
- U32 LossDwordSynchCount; /* 0x14 */
- U32 PhyResetProblemCount; /* 0x18 */
-} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
- Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t;
-
-#define MPI2_SASPHY1_PAGEVERSION (0x01)
-
-
-/* SAS PHY Page 2 */
-
-typedef struct _MPI2_SASPHY2_PHY_EVENT {
- U8 PhyEventCode; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 PhyEventInfo; /* 0x04 */
-} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT,
- Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t;
-
-/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhyEvents at runtime.
- */
-#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
-#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U8 NumPhyEvents; /* 0x0C */
- U8 Reserved2; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX];
- /* 0x10 */
-} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
- Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t;
-
-#define MPI2_SASPHY2_PAGEVERSION (0x00)
-
-
-/* SAS PHY Page 3 */
-
-typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
- U8 PhyEventCode; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U8 CounterType; /* 0x04 */
- U8 ThresholdWindow; /* 0x05 */
- U8 TimeUnits; /* 0x06 */
- U8 Reserved3; /* 0x07 */
- U32 EventThreshold; /* 0x08 */
- U16 ThresholdFlags; /* 0x0C */
- U16 Reserved4; /* 0x0E */
-} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
- Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t;
-
-/* values for PhyEventCode field */
-#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
-#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
-#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
-#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
-#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
-#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
-#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
-#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
-#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
-#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
-#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
-#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
-#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
-#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
-#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
-#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
-#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
-#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
-#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
-#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
-#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
-#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
-#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
-#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
-
-/* values for the CounterType field */
-#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
-#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
-#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
-
-/* values for the TimeUnits field */
-#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
-#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
-#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
-#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
-
-/* values for the ThresholdFlags field */
-#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
-#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhyEvents at runtime.
- */
-#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
-#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U8 NumPhyEvents; /* 0x0C */
- U8 Reserved2; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig
- [MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */
-} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
- Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t;
-
-#define MPI2_SASPHY3_PAGEVERSION (0x00)
-
-
-/* SAS PHY Page 4 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U16 Reserved1; /* 0x08 */
- U8 Reserved2; /* 0x0A */
- U8 Flags; /* 0x0B */
- U8 InitialFrame[28]; /* 0x0C */
-} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
- Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t;
-
-#define MPI2_SASPHY4_PAGEVERSION (0x00)
-
-/* values for the Flags field */
-#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02)
-#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01)
-
-
-
-
-/****************************************************************************
-* SAS Port Config Pages
-****************************************************************************/
-
-/* SAS Port Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 PortNumber; /* 0x08 */
- U8 PhysicalPort; /* 0x09 */
- U8 PortWidth; /* 0x0A */
- U8 PhysicalPortWidth; /* 0x0B */
- U8 ZoneGroup; /* 0x0C */
- U8 Reserved1; /* 0x0D */
- U16 Reserved2; /* 0x0E */
- U64 SASAddress; /* 0x10 */
- U32 DeviceInfo; /* 0x18 */
- U32 Reserved3; /* 0x1C */
- U32 Reserved4; /* 0x20 */
-} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
- Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t;
-
-#define MPI2_SASPORT0_PAGEVERSION (0x00)
-
-/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
-
-
-/****************************************************************************
-* SAS Enclosure Config Pages
-****************************************************************************/
-
-/* SAS Enclosure Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U64 EnclosureLogicalID; /* 0x0C */
- U16 Flags; /* 0x14 */
- U16 EnclosureHandle; /* 0x16 */
- U16 NumSlots; /* 0x18 */
- U16 StartSlot; /* 0x1A */
- U8 Reserved2; /* 0x1C */
- U8 EnclosureLevel; /* 0x1D */
- U16 SEPDevHandle; /* 0x1E */
- U32 Reserved3; /* 0x20 */
- U32 Reserved4; /* 0x24 */
-} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
- Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t;
-
-#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
-
-/* values for SAS Enclosure Page 0 Flags field */
-#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
-
-
-/****************************************************************************
-* Log Config Page
-****************************************************************************/
-
-/* Log Page 0 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumLogEntries at runtime.
- */
-#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
-#define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
-#endif
-
-#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C)
-
-typedef struct _MPI2_LOG_0_ENTRY
-{
- U64 TimeStamp; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U16 LogSequence; /* 0x0C */
- U16 LogEntryQualifier; /* 0x0E */
- U8 VP_ID; /* 0x10 */
- U8 VF_ID; /* 0x11 */
- U16 Reserved2; /* 0x12 */
- U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */
-} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY,
- Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t;
-
-/* values for Log Page 0 LogEntry LogEntryQualifier field */
-#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000)
-#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001)
-#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002)
-#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000)
-#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF)
-
-typedef struct _MPI2_CONFIG_PAGE_LOG_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
- U16 NumLogEntries; /* 0x10 */
- U16 Reserved3; /* 0x12 */
- MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */
-} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0,
- Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t;
-
-#define MPI2_LOG_0_PAGEVERSION (0x02)
-
-
-/****************************************************************************
-* RAID Config Page
-****************************************************************************/
-
-/* RAID Page 0 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumElements at runtime.
- */
-#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
-#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
-#endif
-
-typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT
-{
- U16 ElementFlags; /* 0x00 */
- U16 VolDevHandle; /* 0x02 */
- U8 HotSparePool; /* 0x04 */
- U8 PhysDiskNum; /* 0x05 */
- U16 PhysDiskDevHandle; /* 0x06 */
-} MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
- MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
- Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t;
-
-/* values for the ElementFlags field */
-#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F)
-#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000)
-#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001)
-#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002)
-#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003)
-
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 NumHotSpares; /* 0x08 */
- U8 NumPhysDisks; /* 0x09 */
- U8 NumVolumes; /* 0x0A */
- U8 ConfigNum; /* 0x0B */
- U32 Flags; /* 0x0C */
- U8 ConfigGUID[24]; /* 0x10 */
- U32 Reserved1; /* 0x28 */
- U8 NumElements; /* 0x2C */
- U8 Reserved2; /* 0x2D */
- U16 Reserved3; /* 0x2E */
- MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */
-} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
- Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t;
-
-#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00)
-
-/* values for RAID Configuration Page 0 Flags field */
-#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001)
-
-
-/****************************************************************************
-* Driver Persistent Mapping Config Pages
-****************************************************************************/
-
-/* Driver Persistent Mapping Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY
-{
- U64 PhysicalIdentifier; /* 0x00 */
- U16 MappingInformation; /* 0x08 */
- U16 DeviceIndex; /* 0x0A */
- U32 PhysicalBitsMapping; /* 0x0C */
- U32 Reserved1; /* 0x10 */
-} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
- Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */
-} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
- Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t;
-
-#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00)
-
-/* values for Driver Persistent Mapping Page 0 MappingInformation field */
-#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0)
-#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4)
-#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
-
-
-/****************************************************************************
-* Ethernet Config Pages
-****************************************************************************/
-
-/* Ethernet Page 0 */
-
-/* IP address (union of IPv4 and IPv6) */
-typedef union _MPI2_ETHERNET_IP_ADDR {
- U32 IPv4Addr;
- U32 IPv6Addr[4];
-} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR,
- Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t;
-
-#define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
-
-typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 NumInterfaces; /* 0x08 */
- U8 Reserved0; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U32 Status; /* 0x0C */
- U8 MediaState; /* 0x10 */
- U8 Reserved2; /* 0x11 */
- U16 Reserved3; /* 0x12 */
- U8 MacAddress[6]; /* 0x14 */
- U8 Reserved4; /* 0x1A */
- U8 Reserved5; /* 0x1B */
- MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */
- MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */
- MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */
- MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */
- MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */
- MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */
- U8 HostName
- [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
-} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
- Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t;
-
-#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
-
-/* values for Ethernet Page 0 Status field */
-#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
-#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
-#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
-#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
-#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
-#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
-#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
-#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
-#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
-#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
-#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
-#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
-
-/* values for Ethernet Page 0 MediaState field */
-#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
-#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
-#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
-
-#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
-#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
-#define MPI2_ETHPG0_MS_10MBIT (0x01)
-#define MPI2_ETHPG0_MS_100MBIT (0x02)
-#define MPI2_ETHPG0_MS_1GBIT (0x03)
-
-
-/* Ethernet Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved0; /* 0x08 */
- U32 Flags; /* 0x0C */
- U8 MediaState; /* 0x10 */
- U8 Reserved1; /* 0x11 */
- U16 Reserved2; /* 0x12 */
- U8 MacAddress[6]; /* 0x14 */
- U8 Reserved3; /* 0x1A */
- U8 Reserved4; /* 0x1B */
- MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */
- MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */
- MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */
- MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */
- MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */
- U32 Reserved5; /* 0x6C */
- U32 Reserved6; /* 0x70 */
- U32 Reserved7; /* 0x74 */
- U32 Reserved8; /* 0x78 */
- U8 HostName
- [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
-} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
- Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t;
-
-#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
-
-/* values for Ethernet Page 1 Flags field */
-#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
-#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
-#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
-#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
-#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
-#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
-#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
-#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
-#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
-
-/* values for Ethernet Page 1 MediaState field */
-#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
-#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
-#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
-
-#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
-#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
-#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
-#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
-#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
-
-
-/****************************************************************************
-* Extended Manufacturing Config Pages
-****************************************************************************/
-
-/*
- * Generic structure to use for product-specific extended manufacturing pages
- * (currently Extended Manufacturing Page 40 through Extended Manufacturing
- * Page 60).
- */
-
-typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 ProductSpecificInfo; /* 0x08 */
-} MPI2_CONFIG_PAGE_EXT_MAN_PS,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
- Mpi2ExtManufacturingPagePS_t,
- MPI2_POINTER pMpi2ExtManufacturingPagePS_t;
-
-/* PageVersion should be provided by product-specific code */
-
-#endif
-
+++ /dev/null
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_init.h
- * Title: MPI SCSI initiator mode messages and structures
- * Creation Date: June 23, 2006
- *
- * mpi2_init.h Version: 02.00.15
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
- * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
- * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
- * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
- * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
- * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
- * Control field Task Attribute flags.
- * Moved LUN field defines to mpi2.h because they are
- * common to many structures.
- * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
- * Query Asynchronous Event.
- * Defined two new bits in the SlotStatus field of the SCSI
- * Enclosure Processor Request and Reply.
- * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
- * both SCSI IO Error Reply and SCSI Task Management Reply.
- * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
- * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
- * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it.
- * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
- * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
- * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command
- * Priority to match SAM-4.
- * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
- * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
- * replacing the Reserved4 field.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_INIT_H
-#define MPI2_INIT_H
-
-/*****************************************************************************
-*
-* SCSI Initiator Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-* SCSI IO messages and associated structures
-****************************************************************************/
-
-typedef struct
-{
- U8 CDB[20]; /* 0x00 */
- U32 PrimaryReferenceTag; /* 0x14 */
- U16 PrimaryApplicationTag; /* 0x18 */
- U16 PrimaryApplicationTagMask; /* 0x1A */
- U32 TransferLength; /* 0x1C */
-} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
- Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;
-
-typedef union
-{
- U8 CDB32[32];
- MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
- MPI2_SGE_SIMPLE_UNION SGE;
-} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION,
- Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t;
-
-/* SCSI IO Request Message */
-typedef struct _MPI2_SCSI_IO_REQUEST
-{
- U16 DevHandle; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U32 SenseBufferLowAddress; /* 0x0C */
- U16 SGLFlags; /* 0x10 */
- U8 SenseBufferLength; /* 0x12 */
- U8 Reserved4; /* 0x13 */
- U8 SGLOffset0; /* 0x14 */
- U8 SGLOffset1; /* 0x15 */
- U8 SGLOffset2; /* 0x16 */
- U8 SGLOffset3; /* 0x17 */
- U32 SkipCount; /* 0x18 */
- U32 DataLength; /* 0x1C */
- U32 BidirectionalDataLength; /* 0x20 */
- U16 IoFlags; /* 0x24 */
- U16 EEDPFlags; /* 0x26 */
- U32 EEDPBlockSize; /* 0x28 */
- U32 SecondaryReferenceTag; /* 0x2C */
- U16 SecondaryApplicationTag; /* 0x30 */
- U16 ApplicationTagTranslationMask; /* 0x32 */
- U8 LUN[8]; /* 0x34 */
- U32 Control; /* 0x3C */
- MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
-
-#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /* typically this is left undefined */
- MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
-#endif
-
- MPI2_SGE_IO_UNION SGL; /* 0x60 */
-
-} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST,
- Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t;
-
-/* SCSI IO MsgFlags bits */
-
-/* MsgFlags for SenseBufferAddressSpace */
-#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C)
-#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00)
-#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04)
-#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08)
-#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C)
-
-/* SCSI IO SGLFlags bits */
-
-/* base values for Data Location Address Space */
-#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C)
-#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00)
-#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04)
-#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08)
-#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C)
-
-/* base values for Type */
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02)
-
-/* shift values for each sub-field */
-#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12)
-#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8)
-#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4)
-#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0)
-
-/* number of SGLOffset fields */
-#define MPI2_SCSIIO_NUM_SGLOFFSETS (4)
-
-/* SCSI IO IoFlags bits */
-
-/* Large CDB Address Space */
-#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000)
-#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000)
-
-#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
-#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
-#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400)
-#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
-#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
-
-/* SCSI IO EEDPFlags bits */
-
-#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
-
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
-
-#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
-
-#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007)
-#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001)
-#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
-#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
-#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
-
-/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
-
-/* SCSI IO Control bits */
-#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000)
-#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
-
-#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
-#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24)
-#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
-#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
-#define MPI2_SCSIIO_CONTROL_READ (0x02000000)
-#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000)
-
-#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800)
-#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11)
-/* alternate name for the previous field; called Command Priority in SAM-4 */
-#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800)
-#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11)
-
-#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
-#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
-#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100)
-#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
-#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400)
-
-#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0)
-#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000)
-#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040)
-#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080)
-
-
-/* SCSI IO Error Reply Message */
-typedef struct _MPI2_SCSI_IO_REPLY
-{
- U16 DevHandle; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U8 SCSIStatus; /* 0x0C */
- U8 SCSIState; /* 0x0D */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 TransferCount; /* 0x14 */
- U32 SenseCount; /* 0x18 */
- U32 ResponseInfo; /* 0x1C */
- U16 TaskTag; /* 0x20 */
- U16 SCSIStatusQualifier; /* 0x22 */
- U32 BidirectionalTransferCount; /* 0x24 */
- U32 Reserved5; /* 0x28 */
- U32 Reserved6; /* 0x2C */
-} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY,
- Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t;
-
-/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
-
-#define MPI2_SCSI_STATUS_GOOD (0x00)
-#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02)
-#define MPI2_SCSI_STATUS_CONDITION_MET (0x04)
-#define MPI2_SCSI_STATUS_BUSY (0x08)
-#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10)
-#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
-#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
-#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */
-#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28)
-#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30)
-#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40)
-
-/* SCSI IO Reply SCSIState flags */
-
-#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
-#define MPI2_SCSI_STATE_TERMINATED (0x08)
-#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04)
-#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02)
-#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01)
-
-/* masks and shifts for the ResponseInfo field */
-
-#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF)
-#define MPI2_SCSI_RI_SHIFT_REASONCODE (0)
-
-#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF)
-
-
-/****************************************************************************
-* SCSI Task Management messages
-****************************************************************************/
-
-/* SCSI Task Management Request Message */
-typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST
-{
- U16 DevHandle; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Reserved1; /* 0x04 */
- U8 TaskType; /* 0x05 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U8 LUN[8]; /* 0x0C */
- U32 Reserved4[7]; /* 0x14 */
- U16 TaskMID; /* 0x30 */
- U16 Reserved5; /* 0x32 */
-} MPI2_SCSI_TASK_MANAGE_REQUEST,
- MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
- Mpi2SCSITaskManagementRequest_t,
- MPI2_POINTER pMpi2SCSITaskManagementRequest_t;
-
-/* TaskType values */
-
-#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
-#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
-#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
-#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
-#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
-#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
-
-/* obsolete TaskType name */
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \
- (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
-
-/* MsgFlags bits */
-
-#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
-
-#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
-
-
-
-/* SCSI Task Management Reply Message */
-typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY
-{
- U16 DevHandle; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 ResponseCode; /* 0x04 */
- U8 TaskType; /* 0x05 */
- U8 Reserved1; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U16 Reserved3; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 TerminationCount; /* 0x14 */
- U32 ResponseInfo; /* 0x18 */
-} MPI2_SCSI_TASK_MANAGE_REPLY,
- MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
- Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t;
-
-/* ResponseCode values */
-
-#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
-#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
-#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
-#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
-#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
-#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
-#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
-#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
-
-/* masks and shifts for the ResponseInfo field */
-
-#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24)
-
-
-/****************************************************************************
-* SCSI Enclosure Processor messages
-****************************************************************************/
-
-/* SCSI Enclosure Processor Request Message */
-typedef struct _MPI2_SEP_REQUEST
-{
- U16 DevHandle; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Action; /* 0x04 */
- U8 Flags; /* 0x05 */
- U8 Reserved1; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U32 SlotStatus; /* 0x0C */
- U32 Reserved3; /* 0x10 */
- U32 Reserved4; /* 0x14 */
- U32 Reserved5; /* 0x18 */
- U16 Slot; /* 0x1C */
- U16 EnclosureHandle; /* 0x1E */
-} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST,
- Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t;
-
-/* Action defines */
-#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00)
-#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01)
-
-/* Flags defines */
-#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00)
-#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
-
-/* SlotStatus defines */
-#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
-#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
-#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
-#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
-#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
-#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
-#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
-#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
-#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
-#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
-#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
-
-
-/* SCSI Enclosure Processor Reply Message */
-typedef struct _MPI2_SEP_REPLY
-{
- U16 DevHandle; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Action; /* 0x04 */
- U8 Flags; /* 0x05 */
- U8 Reserved1; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U16 Reserved3; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 SlotStatus; /* 0x14 */
- U32 Reserved4; /* 0x18 */
- U16 Slot; /* 0x1C */
- U16 EnclosureHandle; /* 0x1E */
-} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY,
- Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t;
-
-/* SlotStatus defines */
-#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
-#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
-#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
-#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
-#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
-#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
-#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
-#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
-
-
-#endif
-
-
+++ /dev/null
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_ioc.h
- * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
- * Creation Date: October 11, 2006
- *
- * mpi2_ioc.h Version: 02.00.24
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
- * MaxTargets.
- * Added TotalImageSize field to FWDownload Request.
- * Added reserved words to FWUpload Request.
- * 06-26-07 02.00.02 Added IR Configuration Change List Event.
- * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
- * request and replaced it with
- * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
- * Replaced the MinReplyQueueDepth field of the IOCFacts
- * reply with MaxReplyDescriptorPostQueueDepth.
- * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
- * depth for the Reply Descriptor Post Queue.
- * Added SASAddress field to Initiator Device Table
- * Overflow Event data.
- * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
- * for SAS Initiator Device Status Change Event data.
- * Modified Reason Code defines for SAS Topology Change
- * List Event data, including adding a bit for PHY Vacant
- * status, and adding a mask for the Reason Code.
- * Added define for
- * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
- * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
- * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
- * the IOCFacts Reply.
- * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
- * Moved MPI2_VERSION_UNION to mpi2.h.
- * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
- * instead of enables, and added SASBroadcastPrimitiveMasks
- * field.
- * Added Log Entry Added Event and related structure.
- * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
- * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
- * Added MaxVolumes and MaxPersistentEntries fields to
- * IOCFacts reply.
- * Added ProtocalFlags and IOCCapabilities fields to
- * MPI2_FW_IMAGE_HEADER.
- * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
- * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
- * a U16 (from a U32).
- * Removed extra 's' from EventMasks name.
- * 06-27-08 02.00.08 Fixed an offset in a comment.
- * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
- * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
- * renamed MinReplyFrameSize to ReplyFrameSize.
- * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
- * Added two new RAIDOperation values for Integrated RAID
- * Operations Status Event data.
- * Added four new IR Configuration Change List Event data
- * ReasonCode values.
- * Added two new ReasonCode defines for SAS Device Status
- * Change Event data.
- * Added three new DiscoveryStatus bits for the SAS
- * Discovery event data.
- * Added Multiplexing Status Change bit to the PhyStatus
- * field of the SAS Topology Change List event data.
- * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
- * BootFlags are now product-specific.
- * Added defines for the indivdual signature bytes
- * for MPI2_INIT_IMAGE_FOOTER.
- * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
- * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
- * define.
- * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
- * define.
- * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
- * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
- * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
- * Added two new reason codes for SAS Device Status Change
- * Event.
- * Added new event: SAS PHY Counter.
- * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
- * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
- * Added new product id family for 2208.
- * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
- * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
- * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
- * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
- * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
- * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
- * Added Host Based Discovery Phy Event data.
- * Added defines for ProductID Product field
- * (MPI2_FW_HEADER_PID_).
- * Modified values for SAS ProductID Family
- * (MPI2_FW_HEADER_PID_FAMILY_).
- * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
- * Added PowerManagementControl Request structures and
- * defines.
- * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
- * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
- * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
- * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
- * SASNotifyPrimitiveMasks field to
- * MPI2_EVENT_NOTIFICATION_REQUEST.
- * Added Temperature Threshold Event.
- * Added Host Message Event.
- * Added Send Host Message request and reply.
- * 05-25-11 02.00.18 For Extended Image Header, added
- * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
- * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
- * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
- * 08-24-11 02.00.19 Added PhysicalPort field to
- * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
- * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
- * 03-29-12 02.00.21 Added a product specific range to event values.
- * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
- * Added ElapsedSeconds field to
- * MPI2_EVENT_DATA_IR_OPERATION_STATUS.
- * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
- * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
- * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
- * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
- * Added Encrypted Hash Extended Image.
- * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_IOC_H
-#define MPI2_IOC_H
-
-/*****************************************************************************
-*
-* IOC Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-* IOCInit message
-****************************************************************************/
-
-/* IOCInit Request message */
-typedef struct _MPI2_IOC_INIT_REQUEST
-{
- U8 WhoInit; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 MsgVersion; /* 0x0C */
- U16 HeaderVersion; /* 0x0E */
- U32 Reserved5; /* 0x10 */
- U16 Reserved6; /* 0x14 */
- U8 Reserved7; /* 0x16 */
- U8 HostMSIxVectors; /* 0x17 */
- U16 Reserved8; /* 0x18 */
- U16 SystemRequestFrameSize; /* 0x1A */
- U16 ReplyDescriptorPostQueueDepth; /* 0x1C */
- U16 ReplyFreeQueueDepth; /* 0x1E */
- U32 SenseBufferAddressHigh; /* 0x20 */
- U32 SystemReplyAddressHigh; /* 0x24 */
- U64 SystemRequestFrameBaseAddress; /* 0x28 */
- U64 ReplyDescriptorPostQueueAddress;/* 0x30 */
- U64 ReplyFreeQueueAddress; /* 0x38 */
- U64 TimeStamp; /* 0x40 */
-} MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST,
- Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t;
-
-/* WhoInit values */
-#define MPI2_WHOINIT_NOT_INITIALIZED (0x00)
-#define MPI2_WHOINIT_SYSTEM_BIOS (0x01)
-#define MPI2_WHOINIT_ROM_BIOS (0x02)
-#define MPI2_WHOINIT_PCI_PEER (0x03)
-#define MPI2_WHOINIT_HOST_DRIVER (0x04)
-#define MPI2_WHOINIT_MANUFACTURER (0x05)
-
-/* MsgFlags */
-#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01)
-
-/* MsgVersion */
-#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00)
-#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8)
-#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF)
-#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0)
-
-/* HeaderVersion */
-#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00)
-#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8)
-#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
-#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
-
-/* minimum depth for a Reply Descriptor Post Queue */
-#define MPI2_RDPQ_DEPTH_MIN (16)
-
-/* Reply Descriptor Post Queue Array Entry */
-typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
- U64 RDPQBaseAddress; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
-} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
-MPI2_POINTER PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
-Mpi2IOCInitRDPQArrayEntry, MPI2_POINTER pMpi2IOCInitRDPQArrayEntry;
-
-/* IOCInit Reply message */
-typedef struct _MPI2_IOC_INIT_REPLY
-{
- U8 WhoInit; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY,
- Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t;
-
-
-/****************************************************************************
-* IOCFacts message
-****************************************************************************/
-
-/* IOCFacts Request message */
-typedef struct _MPI2_IOC_FACTS_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
-} MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST,
- Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t;
-
-
-/* IOCFacts Reply message */
-typedef struct _MPI2_IOC_FACTS_REPLY
-{
- U16 MsgVersion; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 HeaderVersion; /* 0x04 */
- U8 IOCNumber; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U16 IOCExceptions; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U8 MaxChainDepth; /* 0x14 */
- U8 WhoInit; /* 0x15 */
- U8 NumberOfPorts; /* 0x16 */
- U8 MaxMSIxVectors; /* 0x17 */
- U16 RequestCredit; /* 0x18 */
- U16 ProductID; /* 0x1A */
- U32 IOCCapabilities; /* 0x1C */
- MPI2_VERSION_UNION FWVersion; /* 0x20 */
- U16 IOCRequestFrameSize; /* 0x24 */
- U16 Reserved3; /* 0x26 */
- U16 MaxInitiators; /* 0x28 */
- U16 MaxTargets; /* 0x2A */
- U16 MaxSasExpanders; /* 0x2C */
- U16 MaxEnclosures; /* 0x2E */
- U16 ProtocolFlags; /* 0x30 */
- U16 HighPriorityCredit; /* 0x32 */
- U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */
- U8 ReplyFrameSize; /* 0x36 */
- U8 MaxVolumes; /* 0x37 */
- U16 MaxDevHandle; /* 0x38 */
- U16 MaxPersistentEntries; /* 0x3A */
- U16 MinDevHandle; /* 0x3C */
- U16 Reserved4; /* 0x3E */
-} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY,
- Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t;
-
-/* MsgVersion */
-#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
-#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8)
-#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
-#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0)
-
-/* HeaderVersion */
-#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00)
-#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8)
-#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF)
-#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
-
-/* IOCExceptions */
-#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
-#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
-
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060)
-
-#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
-#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008)
-#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
-#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
-#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
-
-/* defines for WhoInit field are after the IOCInit Request */
-
-/* ProductID field uses MPI2_FW_HEADER_PID_ */
-
-/* IOCCapabilities */
-#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
-#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
-#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
-#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
-#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
-#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000)
-#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800)
-#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
-#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080)
-#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040)
-#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
-#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
-#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
-#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
-
-/* ProtocolFlags */
-#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
-#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
-
-
-/****************************************************************************
-* PortFacts message
-****************************************************************************/
-
-/* PortFacts Request message */
-typedef struct _MPI2_PORT_FACTS_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 PortNumber; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
-} MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST,
- Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t;
-
-/* PortFacts Reply message */
-typedef struct _MPI2_PORT_FACTS_REPLY
-{
- U16 Reserved1; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 PortNumber; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U16 Reserved4; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U8 Reserved5; /* 0x14 */
- U8 PortType; /* 0x15 */
- U16 Reserved6; /* 0x16 */
- U16 MaxPostedCmdBuffers; /* 0x18 */
- U16 Reserved7; /* 0x1A */
-} MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY,
- Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t;
-
-/* PortType values */
-#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00)
-#define MPI2_PORTFACTS_PORTTYPE_FC (0x10)
-#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
-#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
-#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
-
-
-/****************************************************************************
-* PortEnable message
-****************************************************************************/
-
-/* PortEnable Request message */
-typedef struct _MPI2_PORT_ENABLE_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Reserved2; /* 0x04 */
- U8 PortFlags; /* 0x05 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
-} MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST,
- Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t;
-
-
-/* PortEnable Reply message */
-typedef struct _MPI2_PORT_ENABLE_REPLY
-{
- U16 Reserved1; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Reserved2; /* 0x04 */
- U8 PortFlags; /* 0x05 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY,
- Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t;
-
-
-/****************************************************************************
-* EventNotification message
-****************************************************************************/
-
-/* EventNotification Request message */
-#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4)
-
-typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 Reserved5; /* 0x0C */
- U32 Reserved6; /* 0x10 */
- U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */
- U16 SASBroadcastPrimitiveMasks; /* 0x24 */
- U16 SASNotifyPrimitiveMasks; /* 0x26 */
- U32 Reserved8; /* 0x28 */
-} MPI2_EVENT_NOTIFICATION_REQUEST,
- MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
- Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t;
-
-
-/* EventNotification Reply message */
-typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
-{
- U16 EventDataLength; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 AckRequired; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U16 Reserved3; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U16 Event; /* 0x14 */
- U16 Reserved4; /* 0x16 */
- U32 EventContext; /* 0x18 */
- U32 EventData[1]; /* 0x1C */
-} MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY,
- Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t;
-
-/* AckRequired */
-#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
-#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01)
-
-/* Event */
-#define MPI2_EVENT_LOG_DATA (0x0001)
-#define MPI2_EVENT_STATE_CHANGE (0x0002)
-#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005)
-#define MPI2_EVENT_EVENT_CHANGE (0x000A)
-#define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */
-#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F)
-#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014)
-#define MPI2_EVENT_SAS_DISCOVERY (0x0016)
-#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017)
-#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018)
-#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
-#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
-#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
-#define MPI2_EVENT_IR_VOLUME (0x001E)
-#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
-#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
-#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
-#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
-#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
-#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
-#define MPI2_EVENT_SAS_QUIESCE (0x0025)
-#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
-#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
-#define MPI2_EVENT_HOST_MESSAGE (0x0028)
-#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
-#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
-
-/* Log Entry Added Event data */
-
-/* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
-#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C)
-
-typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED
-{
- U64 TimeStamp; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U16 LogSequence; /* 0x0C */
- U16 LogEntryQualifier; /* 0x0E */
- U8 VP_ID; /* 0x10 */
- U8 VF_ID; /* 0x11 */
- U16 Reserved2; /* 0x12 */
- U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */
-} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
- Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t;
-
-/* GPIO Interrupt Event data */
-
-typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
- U8 GPIONum; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
-} MPI2_EVENT_DATA_GPIO_INTERRUPT,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
- Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
-
-/* Temperature Threshold Event data */
-
-typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
- U16 Status; /* 0x00 */
- U8 SensorNum; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U16 CurrentTemperature; /* 0x04 */
- U16 Reserved2; /* 0x06 */
- U32 Reserved3; /* 0x08 */
- U32 Reserved4; /* 0x0C */
-} MPI2_EVENT_DATA_TEMPERATURE,
-MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE,
-Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t;
-
-/* Temperature Threshold Event data Status bits */
-#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
-#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
-#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
-#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
-
-
-/* Host Message Event data */
-
-typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
- U8 SourceVF_ID; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 Reserved3; /* 0x04 */
- U32 HostData[1]; /* 0x08 */
-} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
-Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t;
-
-
-/* Hard Reset Received Event data */
-
-typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
-{
- U8 Reserved1; /* 0x00 */
- U8 Port; /* 0x01 */
- U16 Reserved2; /* 0x02 */
-} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
- Mpi2EventDataHardResetReceived_t,
- MPI2_POINTER pMpi2EventDataHardResetReceived_t;
-
-/* Task Set Full Event data */
-/* this event is obsolete */
-
-typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL
-{
- U16 DevHandle; /* 0x00 */
- U16 CurrentDepth; /* 0x02 */
-} MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
- Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t;
-
-
-/* SAS Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
-{
- U16 TaskTag; /* 0x00 */
- U8 ReasonCode; /* 0x02 */
- U8 PhysicalPort; /* 0x03 */
- U8 ASC; /* 0x04 */
- U8 ASCQ; /* 0x05 */
- U16 DevHandle; /* 0x06 */
- U32 Reserved2; /* 0x08 */
- U64 SASAddress; /* 0x0C */
- U8 LUN[8]; /* 0x14 */
-} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
- Mpi2EventDataSasDeviceStatusChange_t,
- MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t;
-
-/* SAS Device Status Change Event data ReasonCode values */
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12)
-
-
-/* Integrated RAID Operation Status Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS
-{
- U16 VolDevHandle; /* 0x00 */
- U16 Reserved1; /* 0x02 */
- U8 RAIDOperation; /* 0x04 */
- U8 PercentComplete; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U32 ElapsedSeconds; /* 0x08 */
-} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
- Mpi2EventDataIrOperationStatus_t,
- MPI2_POINTER pMpi2EventDataIrOperationStatus_t;
-
-/* Integrated RAID Operation Status Event data RAIDOperation values */
-#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00)
-#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01)
-#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02)
-#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03)
-#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04)
-
-
-/* Integrated RAID Volume Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_VOLUME
-{
- U16 VolDevHandle; /* 0x00 */
- U8 ReasonCode; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 NewValue; /* 0x04 */
- U32 PreviousValue; /* 0x08 */
-} MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME,
- Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t;
-
-/* Integrated RAID Volume Event data ReasonCode values */
-#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01)
-#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02)
-#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03)
-
-
-/* Integrated RAID Physical Disk Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK
-{
- U16 Reserved1; /* 0x00 */
- U8 ReasonCode; /* 0x02 */
- U8 PhysDiskNum; /* 0x03 */
- U16 PhysDiskDevHandle; /* 0x04 */
- U16 Reserved2; /* 0x06 */
- U16 Slot; /* 0x08 */
- U16 EnclosureHandle; /* 0x0A */
- U32 NewValue; /* 0x0C */
- U32 PreviousValue; /* 0x10 */
-} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
- Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t;
-
-/* Integrated RAID Physical Disk Event data ReasonCode values */
-#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01)
-#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02)
-#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03)
-
-
-/* Integrated RAID Configuration Change List Event data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumElements at runtime.
- */
-#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
-#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1)
-#endif
-
-typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT
-{
- U16 ElementFlags; /* 0x00 */
- U16 VolDevHandle; /* 0x02 */
- U8 ReasonCode; /* 0x04 */
- U8 PhysDiskNum; /* 0x05 */
- U16 PhysDiskDevHandle; /* 0x06 */
-} MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
- Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t;
-
-/* IR Configuration Change List Event data ElementFlags values */
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002)
-
-/* IR Configuration Change List Event data ReasonCode values */
-#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01)
-#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02)
-#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03)
-#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04)
-#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05)
-#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06)
-#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07)
-#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08)
-#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09)
-
-typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST
-{
- U8 NumElements; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 Reserved2; /* 0x02 */
- U8 ConfigNum; /* 0x03 */
- U32 Flags; /* 0x04 */
- MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */
-} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
- Mpi2EventDataIrConfigChangeList_t,
- MPI2_POINTER pMpi2EventDataIrConfigChangeList_t;
-
-/* IR Configuration Change List Event data Flags values */
-#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001)
-
-
-/* SAS Discovery Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY
-{
- U8 Flags; /* 0x00 */
- U8 ReasonCode; /* 0x01 */
- U8 PhysicalPort; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 DiscoveryStatus; /* 0x04 */
-} MPI2_EVENT_DATA_SAS_DISCOVERY,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
- Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t;
-
-/* SAS Discovery Event data Flags values */
-#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02)
-#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01)
-
-/* SAS Discovery Event data ReasonCode values */
-#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01)
-#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02)
-
-/* SAS Discovery Event data DiscoveryStatus values */
-#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
-#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000)
-#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
-#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
-#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000)
-#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
-#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800)
-#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400)
-#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080)
-#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040)
-#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010)
-#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004)
-#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002)
-#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001)
-
-
-/* SAS Broadcast Primitive Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE
-{
- U8 PhyNum; /* 0x00 */
- U8 Port; /* 0x01 */
- U8 PortWidth; /* 0x02 */
- U8 Primitive; /* 0x03 */
-} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
- Mpi2EventDataSasBroadcastPrimitive_t,
- MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t;
-
-/* defines for the Primitive field */
-#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01)
-#define MPI2_EVENT_PRIMITIVE_SES (0x02)
-#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03)
-#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
-#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05)
-#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06)
-#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
-#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
-
-/* SAS Notify Primitive Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
- U8 PhyNum; /* 0x00 */
- U8 Port; /* 0x01 */
- U8 Reserved1; /* 0x02 */
- U8 Primitive; /* 0x03 */
-} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
-MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
-Mpi2EventDataSasNotifyPrimitive_t,
-MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t;
-
-/* defines for the Primitive field */
-#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
-#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
-#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
-#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
-
-
-/* SAS Initiator Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE
-{
- U8 ReasonCode; /* 0x00 */
- U8 PhysicalPort; /* 0x01 */
- U16 DevHandle; /* 0x02 */
- U64 SASAddress; /* 0x04 */
-} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
- Mpi2EventDataSasInitDevStatusChange_t,
- MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t;
-
-/* SAS Initiator Device Status Change event ReasonCode values */
-#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01)
-#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
-
-
-/* SAS Initiator Device Table Overflow Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
-{
- U16 MaxInit; /* 0x00 */
- U16 CurrentInit; /* 0x02 */
- U64 SASAddress; /* 0x04 */
-} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
- Mpi2EventDataSasInitTableOverflow_t,
- MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t;
-
-
-/* SAS Topology Change List Event data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumEntries at runtime.
- */
-#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
-#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1)
-#endif
-
-typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY
-{
- U16 AttachedDevHandle; /* 0x00 */
- U8 LinkRate; /* 0x02 */
- U8 PhyStatus; /* 0x03 */
-} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
- Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t;
-
-typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST
-{
- U16 EnclosureHandle; /* 0x00 */
- U16 ExpanderDevHandle; /* 0x02 */
- U8 NumPhys; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U8 NumEntries; /* 0x08 */
- U8 StartPhyNum; /* 0x09 */
- U8 ExpStatus; /* 0x0A */
- U8 PhysicalPort; /* 0x0B */
- MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/
-} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
- Mpi2EventDataSasTopologyChangeList_t,
- MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t;
-
-/* values for the ExpStatus field */
-#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
-#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01)
-#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
-#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
-#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
-
-/* defines for the LinkRate field */
-#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0)
-#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
-#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F)
-#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
-
-#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
-#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
-#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
-#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
-#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
-#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
-#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
-
-/* values for the PhyStatus field */
-#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
-#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10)
-/* values for the PhyStatus ReasonCode sub-field */
-#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F)
-#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01)
-#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02)
-#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03)
-#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04)
-#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05)
-
-
-/* SAS Enclosure Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE
-{
- U16 EnclosureHandle; /* 0x00 */
- U8 ReasonCode; /* 0x02 */
- U8 PhysicalPort; /* 0x03 */
- U64 EnclosureLogicalID; /* 0x04 */
- U16 NumSlots; /* 0x0C */
- U16 StartSlot; /* 0x0E */
- U32 PhyBits; /* 0x10 */
-} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
- Mpi2EventDataSasEnclDevStatusChange_t,
- MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t;
-
-/* SAS Enclosure Device Status Change event ReasonCode values */
-#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
-#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
-
-
-/* SAS PHY Counter Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
- U64 TimeStamp; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U8 PhyEventCode; /* 0x0C */
- U8 PhyNum; /* 0x0D */
- U16 Reserved2; /* 0x0E */
- U32 PhyEventInfo; /* 0x10 */
- U8 CounterType; /* 0x14 */
- U8 ThresholdWindow; /* 0x15 */
- U8 TimeUnits; /* 0x16 */
- U8 Reserved3; /* 0x17 */
- U32 EventThreshold; /* 0x18 */
- U16 ThresholdFlags; /* 0x1C */
- U16 Reserved4; /* 0x1E */
-} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
- Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t;
-
-/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the
- * PhyEventCode field
- * use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the
- * CounterType field
- * use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the
- * TimeUnits field
- * use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the
- * ThresholdFlags field
- * */
-
-
-/* SAS Quiesce Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
- U8 ReasonCode; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 Reserved3; /* 0x04 */
-} MPI2_EVENT_DATA_SAS_QUIESCE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
- Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t;
-
-/* SAS Quiesce Event data ReasonCode values */
-#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01)
-#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02)
-
-
-/* Host Based Discovery Phy Event data */
-
-typedef struct _MPI2_EVENT_HBD_PHY_SAS {
- U8 Flags; /* 0x00 */
- U8 NegotiatedLinkRate; /* 0x01 */
- U8 PhyNum; /* 0x02 */
- U8 PhysicalPort; /* 0x03 */
- U32 Reserved1; /* 0x04 */
- U8 InitialFrame[28]; /* 0x08 */
-} MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS,
- Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t;
-
-/* values for the Flags field */
-#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02)
-#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01)
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for
- * the NegotiatedLinkRate field */
-
-typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
- MPI2_EVENT_HBD_PHY_SAS Sas;
-} MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR,
- Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t;
-
-typedef struct _MPI2_EVENT_DATA_HBD_PHY {
- U8 DescriptorType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 Reserved3; /* 0x04 */
- MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */
-} MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY,
- Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t;
-
-/* values for the DescriptorType field */
-#define MPI2_EVENT_HBD_DT_SAS (0x01)
-
-
-
-/****************************************************************************
-* EventAck message
-****************************************************************************/
-
-/* EventAck Request message */
-typedef struct _MPI2_EVENT_ACK_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Event; /* 0x0C */
- U16 Reserved5; /* 0x0E */
- U32 EventContext; /* 0x10 */
-} MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST,
- Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t;
-
-
-/* EventAck Reply message */
-typedef struct _MPI2_EVENT_ACK_REPLY
-{
- U16 Reserved1; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY,
- Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t;
-
-
-/****************************************************************************
-* SendHostMessage message
-****************************************************************************/
-
-/* SendHostMessage Request message */
-typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
- U16 HostDataLength; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U8 Reserved4; /* 0x0C */
- U8 DestVF_ID; /* 0x0D */
- U16 Reserved5; /* 0x0E */
- U32 Reserved6; /* 0x10 */
- U32 Reserved7; /* 0x14 */
- U32 Reserved8; /* 0x18 */
- U32 Reserved9; /* 0x1C */
- U32 Reserved10; /* 0x20 */
- U32 HostData[1]; /* 0x24 */
-} MPI2_SEND_HOST_MESSAGE_REQUEST,
-MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
-Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t;
-
-
-/* SendHostMessage Reply message */
-typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
- U16 HostDataLength; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U16 Reserved4; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
-Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t;
-
-
-/****************************************************************************
-* FWDownload message
-****************************************************************************/
-
-/* FWDownload Request message */
-typedef struct _MPI2_FW_DOWNLOAD_REQUEST
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 TotalImageSize; /* 0x0C */
- U32 Reserved5; /* 0x10 */
- MPI2_MPI_SGE_UNION SGL; /* 0x14 */
-} MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST,
- Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest;
-
-#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01)
-
-#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01)
-#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02)
-#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
-#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
-#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
-#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
-#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
-#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
-#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
-#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
-
-/* FWDownload TransactionContext Element */
-typedef struct _MPI2_FW_DOWNLOAD_TCSGE
-{
- U8 Reserved1; /* 0x00 */
- U8 ContextSize; /* 0x01 */
- U8 DetailsLength; /* 0x02 */
- U8 Flags; /* 0x03 */
- U32 Reserved2; /* 0x04 */
- U32 ImageOffset; /* 0x08 */
- U32 ImageSize; /* 0x0C */
-} MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE,
- Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t;
-
-/* FWDownload Reply message */
-typedef struct _MPI2_FW_DOWNLOAD_REPLY
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY,
- Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t;
-
-
-/****************************************************************************
-* FWUpload message
-****************************************************************************/
-
-/* FWUpload Request message */
-typedef struct _MPI2_FW_UPLOAD_REQUEST
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 Reserved5; /* 0x0C */
- U32 Reserved6; /* 0x10 */
- MPI2_MPI_SGE_UNION SGL; /* 0x14 */
-} MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST,
- Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t;
-
-#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00)
-#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
-#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
-#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
-#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
-#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
-#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
-#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09)
-#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
-#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
-
-typedef struct _MPI2_FW_UPLOAD_TCSGE
-{
- U8 Reserved1; /* 0x00 */
- U8 ContextSize; /* 0x01 */
- U8 DetailsLength; /* 0x02 */
- U8 Flags; /* 0x03 */
- U32 Reserved2; /* 0x04 */
- U32 ImageOffset; /* 0x08 */
- U32 ImageSize; /* 0x0C */
-} MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE,
- Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t;
-
-/* FWUpload Reply message */
-typedef struct _MPI2_FW_UPLOAD_REPLY
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 ActualImageSize; /* 0x14 */
-} MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY,
- Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t;
-
-
-/* FW Image Header */
-typedef struct _MPI2_FW_IMAGE_HEADER
-{
- U32 Signature; /* 0x00 */
- U32 Signature0; /* 0x04 */
- U32 Signature1; /* 0x08 */
- U32 Signature2; /* 0x0C */
- MPI2_VERSION_UNION MPIVersion; /* 0x10 */
- MPI2_VERSION_UNION FWVersion; /* 0x14 */
- MPI2_VERSION_UNION NVDATAVersion; /* 0x18 */
- MPI2_VERSION_UNION PackageVersion; /* 0x1C */
- U16 VendorID; /* 0x20 */
- U16 ProductID; /* 0x22 */
- U16 ProtocolFlags; /* 0x24 */
- U16 Reserved26; /* 0x26 */
- U32 IOCCapabilities; /* 0x28 */
- U32 ImageSize; /* 0x2C */
- U32 NextImageHeaderOffset; /* 0x30 */
- U32 Checksum; /* 0x34 */
- U32 Reserved38; /* 0x38 */
- U32 Reserved3C; /* 0x3C */
- U32 Reserved40; /* 0x40 */
- U32 Reserved44; /* 0x44 */
- U32 Reserved48; /* 0x48 */
- U32 Reserved4C; /* 0x4C */
- U32 Reserved50; /* 0x50 */
- U32 Reserved54; /* 0x54 */
- U32 Reserved58; /* 0x58 */
- U32 Reserved5C; /* 0x5C */
- U32 Reserved60; /* 0x60 */
- U32 FirmwareVersionNameWhat; /* 0x64 */
- U8 FirmwareVersionName[32]; /* 0x68 */
- U32 VendorNameWhat; /* 0x88 */
- U8 VendorName[32]; /* 0x8C */
- U32 PackageNameWhat; /* 0x88 */
- U8 PackageName[32]; /* 0x8C */
- U32 ReservedD0; /* 0xD0 */
- U32 ReservedD4; /* 0xD4 */
- U32 ReservedD8; /* 0xD8 */
- U32 ReservedDC; /* 0xDC */
- U32 ReservedE0; /* 0xE0 */
- U32 ReservedE4; /* 0xE4 */
- U32 ReservedE8; /* 0xE8 */
- U32 ReservedEC; /* 0xEC */
- U32 ReservedF0; /* 0xF0 */
- U32 ReservedF4; /* 0xF4 */
- U32 ReservedF8; /* 0xF8 */
- U32 ReservedFC; /* 0xFC */
-} MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER,
- Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t;
-
-/* Signature field */
-#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
-#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
-#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
-
-/* Signature0 field */
-#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
-#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
-
-/* Signature1 field */
-#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
-#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
-
-/* Signature2 field */
-#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
-#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
-
-
-/* defines for using the ProductID field */
-#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
-#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
-
-#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
-#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
-#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
-#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
-
-
-#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
-/* SAS */
-#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
-#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
-
-/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
-
-/* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
-
-
-#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
-#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
-#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
-
-#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
-
-#define MPI2_FW_HEADER_SIZE (0x100)
-
-
-/* Extended Image Header */
-typedef struct _MPI2_EXT_IMAGE_HEADER
-
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 Checksum; /* 0x04 */
- U32 ImageSize; /* 0x08 */
- U32 NextImageHeaderOffset; /* 0x0C */
- U32 PackageVersion; /* 0x10 */
- U32 Reserved3; /* 0x14 */
- U32 Reserved4; /* 0x18 */
- U32 Reserved5; /* 0x1C */
- U8 IdentifyString[32]; /* 0x20 */
-} MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER,
- Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t;
-
-/* useful offsets */
-#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
-#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
-#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
-
-#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40)
-
-/* defines for the ImageType field */
-#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
-#define MPI2_EXT_IMAGE_TYPE_FW (0x01)
-#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03)
-#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
-#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
-#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06)
-#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
-#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
-#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
-#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
-#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
-#define MPI2_EXT_IMAGE_TYPE_MAX \
- (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) /* deprecated */
-
-
-
-/* FLASH Layout Extended Image Data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check RegionsPerLayout at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
-#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
-#endif
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumberOfLayouts at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
-#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
-#endif
-
-typedef struct _MPI2_FLASH_REGION
-{
- U8 RegionType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 RegionOffset; /* 0x04 */
- U32 RegionSize; /* 0x08 */
- U32 Reserved3; /* 0x0C */
-} MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION,
- Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t;
-
-typedef struct _MPI2_FLASH_LAYOUT
-{
- U32 FlashSize; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U32 Reserved3; /* 0x0C */
- MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */
-} MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT,
- Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t;
-
-typedef struct _MPI2_FLASH_LAYOUT_DATA
-{
- U8 ImageRevision; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 SizeOfRegion; /* 0x02 */
- U8 Reserved2; /* 0x03 */
- U16 NumberOfLayouts; /* 0x04 */
- U16 RegionsPerLayout; /* 0x06 */
- U16 MinimumSectorAlignment; /* 0x08 */
- U16 Reserved3; /* 0x0A */
- U32 Reserved4; /* 0x0C */
- MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */
-} MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA,
- Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t;
-
-/* defines for the RegionType field */
-#define MPI2_FLASH_REGION_UNUSED (0x00)
-#define MPI2_FLASH_REGION_FIRMWARE (0x01)
-#define MPI2_FLASH_REGION_BIOS (0x02)
-#define MPI2_FLASH_REGION_NVDATA (0x03)
-#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05)
-#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06)
-#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
-#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
-#define MPI2_FLASH_REGION_MEGARAID (0x09)
-#define MPI2_FLASH_REGION_INIT (0x0A)
-
-/* ImageRevision */
-#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
-
-
-
-/* Supported Devices Extended Image Data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumberOfDevices at runtime.
- */
-#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
-#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
-#endif
-
-typedef struct _MPI2_SUPPORTED_DEVICE
-{
- U16 DeviceID; /* 0x00 */
- U16 VendorID; /* 0x02 */
- U16 DeviceIDMask; /* 0x04 */
- U16 Reserved1; /* 0x06 */
- U8 LowPCIRev; /* 0x08 */
- U8 HighPCIRev; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U32 Reserved3; /* 0x0C */
-} MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE,
- Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t;
-
-typedef struct _MPI2_SUPPORTED_DEVICES_DATA
-{
- U8 ImageRevision; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 NumberOfDevices; /* 0x02 */
- U8 Reserved2; /* 0x03 */
- U32 Reserved3; /* 0x04 */
- MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */
-} MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA,
- Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t;
-
-/* ImageRevision */
-#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00)
-
-
-/* Init Extended Image Data */
-
-typedef struct _MPI2_INIT_IMAGE_FOOTER
-
-{
- U32 BootFlags; /* 0x00 */
- U32 ImageSize; /* 0x04 */
- U32 Signature0; /* 0x08 */
- U32 Signature1; /* 0x0C */
- U32 Signature2; /* 0x10 */
- U32 ResetVector; /* 0x14 */
-} MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER,
- Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t;
-
-/* defines for the BootFlags field */
-#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00)
-
-/* defines for the ImageSize field */
-#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04)
-
-/* defines for the Signature0 field */
-#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08)
-#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA)
-
-/* defines for the Signature1 field */
-#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C)
-#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5)
-
-/* defines for the Signature2 field */
-#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10)
-#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A)
-
-/* Signature fields as individual bytes */
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A)
-
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5)
-
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A)
-
-/* defines for the ResetVector field */
-#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
-
-
-/* Encrypted Hash Extended Image Data */
-
-typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
- U8 HashImageType; /* 0x00 */
- U8 HashAlgorithm; /* 0x01 */
- U8 EncryptionAlgorithm; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 Reserved2; /* 0x04 */
- U32 EncryptedHash[1]; /* 0x08 */
-} MPI25_ENCRYPTED_HASH_ENTRY, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_ENTRY,
-Mpi25EncryptedHashEntry_t, MPI2_POINTER pMpi25EncryptedHashEntry_t;
-
-/* values for HashImageType */
-#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
-#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
-#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02)
-
-/* values for HashAlgorithm */
-#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
-#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
-
-/* values for EncryptionAlgorithm */
-#define MPI25_ENCRYPTION_ALG_UNUSED (0x00)
-#define MPI25_ENCRYPTION_ALG_RSA256 (0x01)
-
-typedef struct _MPI25_ENCRYPTED_HASH_DATA {
- U8 ImageVersion; /* 0x00 */
- U8 NumHash; /* 0x01 */
- U16 Reserved1; /* 0x02 */
- U32 Reserved2; /* 0x04 */
- MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */
-} MPI25_ENCRYPTED_HASH_DATA, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_DATA,
-Mpi25EncryptedHashData_t, MPI2_POINTER pMpi25EncryptedHashData_t;
-
-/****************************************************************************
-* PowerManagementControl message
-****************************************************************************/
-
-/* PowerManagementControl Request message */
-typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
- U8 Feature; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 Parameter1; /* 0x0C */
- U8 Parameter2; /* 0x0D */
- U8 Parameter3; /* 0x0E */
- U8 Parameter4; /* 0x0F */
- U32 Reserved5; /* 0x10 */
- U32 Reserved6; /* 0x14 */
-} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
- Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t;
-
-/* defines for the Feature field */
-#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01)
-#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02)
-#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /* obsolete */
-#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04)
-#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80)
-#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF)
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
-/* Parameter1 contains a PHY number */
-/* Parameter2 indicates power condition action using these defines */
-#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01)
-#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02)
-#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03)
-/* Parameter3 and Parameter4 are reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
- * Feature */
-/* Parameter1 contains SAS port width modulation group number */
-/* Parameter2 indicates IOC action using these defines */
-#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01)
-#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02)
-#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03)
-/* Parameter3 indicates desired modulation level using these defines */
-#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00)
-#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01)
-#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02)
-#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03)
-/* Parameter4 is reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
-/* Parameter1 indicates desired PCIe link speed using these defines */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* obsolete */
-/* Parameter2 indicates desired PCIe link width using these defines */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* obsolete */
-/* Parameter3 and Parameter4 are reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
-/* Parameter1 indicates desired IOC hardware clock speed using these defines */
-#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01)
-#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02)
-#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04)
-#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08)
-/* Parameter2, Parameter3, and Parameter4 are reserved */
-
-
-/* PowerManagementControl Reply message */
-typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
- U8 Feature; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
- Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t;
-
-
-#endif
-
+++ /dev/null
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_raid.h
- * Title: MPI Integrated RAID messages and structures
- * Creation Date: April 26, 2007
- *
- * mpi2_raid.h Version: 02.00.10
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 08-31-07 02.00.01 Modifications to RAID Action request and reply,
- * including the Actions and ActionData.
- * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
- * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
- * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
- * can be sized by the build environment.
- * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
- * VolumeCreationFlags and marked the old one as obsolete.
- * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
- * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with
- * related structures and defines.
- * Added product-specific range to RAID Action values.
- * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
- * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
- * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
- * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_RAID_H
-#define MPI2_RAID_H
-
-/*****************************************************************************
-*
-* Integrated RAID Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-* RAID Action messages
-****************************************************************************/
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_CREATE_VOLUME action */
-#define MPI25_RAID_ACTION_ADATA_ALLOW_PI (0x80000000)
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
-#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
-#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001)
-
-/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */
-#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001)
-
-/* ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */
-typedef struct _MPI2_RAID_ACTION_RATE_DATA
-{
- U8 RateToChange; /* 0x00 */
- U8 RateOrMode; /* 0x01 */
- U16 DataScrubDuration; /* 0x02 */
-} MPI2_RAID_ACTION_RATE_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_RATE_DATA,
- Mpi2RaidActionRateData_t, MPI2_POINTER pMpi2RaidActionRateData_t;
-
-#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00)
-#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01)
-#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02)
-
-/* ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */
-typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION
-{
- U8 RAIDFunction; /* 0x00 */
- U8 Flags; /* 0x01 */
- U16 Reserved1; /* 0x02 */
-} MPI2_RAID_ACTION_START_RAID_FUNCTION,
- MPI2_POINTER PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION,
- Mpi2RaidActionStartRaidFunction_t,
- MPI2_POINTER pMpi2RaidActionStartRaidFunction_t;
-
-/* defines for the RAIDFunction field */
-#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00)
-#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01)
-#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02)
-
-/* defines for the Flags field */
-#define MPI2_RAID_ACTION_START_NEW (0x00)
-#define MPI2_RAID_ACTION_START_RESUME (0x01)
-
-/* ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */
-typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION
-{
- U8 RAIDFunction; /* 0x00 */
- U8 Flags; /* 0x01 */
- U16 Reserved1; /* 0x02 */
-} MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
- MPI2_POINTER PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
- Mpi2RaidActionStopRaidFunction_t,
- MPI2_POINTER pMpi2RaidActionStopRaidFunction_t;
-
-/* defines for the RAIDFunction field */
-#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00)
-#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01)
-#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02)
-
-/* defines for the Flags field */
-#define MPI2_RAID_ACTION_STOP_ABORT (0x00)
-#define MPI2_RAID_ACTION_STOP_PAUSE (0x01)
-
-/* ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */
-typedef struct _MPI2_RAID_ACTION_HOT_SPARE
-{
- U8 HotSparePool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 DevHandle; /* 0x02 */
-} MPI2_RAID_ACTION_HOT_SPARE, MPI2_POINTER PTR_MPI2_RAID_ACTION_HOT_SPARE,
- Mpi2RaidActionHotSpare_t, MPI2_POINTER pMpi2RaidActionHotSpare_t;
-
-/* ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */
-typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE
-{
- U8 Flags; /* 0x00 */
- U8 DeviceFirmwareUpdateModeTimeout; /* 0x01 */
- U16 Reserved1; /* 0x02 */
-} MPI2_RAID_ACTION_FW_UPDATE_MODE,
- MPI2_POINTER PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE,
- Mpi2RaidActionFwUpdateMode_t, MPI2_POINTER pMpi2RaidActionFwUpdateMode_t;
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
-#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00)
-#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01)
-
-typedef union _MPI2_RAID_ACTION_DATA
-{
- U32 Word;
- MPI2_RAID_ACTION_RATE_DATA Rates;
- MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction;
- MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction;
- MPI2_RAID_ACTION_HOT_SPARE HotSpare;
- MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode;
-} MPI2_RAID_ACTION_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_DATA,
- Mpi2RaidActionData_t, MPI2_POINTER pMpi2RaidActionData_t;
-
-
-/* RAID Action Request Message */
-typedef struct _MPI2_RAID_ACTION_REQUEST
-{
- U8 Action; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 VolDevHandle; /* 0x04 */
- U8 PhysDiskNum; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U32 Reserved3; /* 0x0C */
- MPI2_RAID_ACTION_DATA ActionDataWord; /* 0x10 */
- MPI2_SGE_SIMPLE_UNION ActionDataSGE; /* 0x14 */
-} MPI2_RAID_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACTION_REQUEST,
- Mpi2RaidActionRequest_t, MPI2_POINTER pMpi2RaidActionRequest_t;
-
-/* RAID Action request Action values */
-
-#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01)
-#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02)
-#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03)
-#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04)
-#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05)
-#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A)
-#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B)
-#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F)
-#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11)
-#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
-#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17)
-#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18)
-#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19)
-#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C)
-#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D)
-#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E)
-#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20)
-#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21)
-#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22)
-#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK (0x23)
-#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN (0x24)
-#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC (0x80)
-#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC (0xFF)
-
-/* RAID Volume Creation Structure */
-
-/*
- * The following define can be customized for the targeted product.
- */
-#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS
-#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1)
-#endif
-
-typedef struct _MPI2_RAID_VOLUME_PHYSDISK
-{
- U8 RAIDSetNum; /* 0x00 */
- U8 PhysDiskMap; /* 0x01 */
- U16 PhysDiskDevHandle; /* 0x02 */
-} MPI2_RAID_VOLUME_PHYSDISK, MPI2_POINTER PTR_MPI2_RAID_VOLUME_PHYSDISK,
- Mpi2RaidVolumePhysDisk_t, MPI2_POINTER pMpi2RaidVolumePhysDisk_t;
-
-/* defines for the PhysDiskMap field */
-#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01)
-#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02)
-
-typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT
-{
- U8 NumPhysDisks; /* 0x00 */
- U8 VolumeType; /* 0x01 */
- U16 Reserved1; /* 0x02 */
- U32 VolumeCreationFlags; /* 0x04 */
- U32 VolumeSettings; /* 0x08 */
- U8 Reserved2; /* 0x0C */
- U8 ResyncRate; /* 0x0D */
- U16 DataScrubDuration; /* 0x0E */
- U64 VolumeMaxLBA; /* 0x10 */
- U32 StripeSize; /* 0x18 */
- U8 Name[16]; /* 0x1C */
- MPI2_RAID_VOLUME_PHYSDISK PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];/* 0x2C */
-} MPI2_RAID_VOLUME_CREATION_STRUCT,
- MPI2_POINTER PTR_MPI2_RAID_VOLUME_CREATION_STRUCT,
- Mpi2RaidVolumeCreationStruct_t, MPI2_POINTER pMpi2RaidVolumeCreationStruct_t;
-
-/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
-
-/* defines for the VolumeCreationFlags field */
-#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000)
-#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004)
-#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002)
-#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001)
-/* The following is an obsolete define.
- * It must be shifted left 24 bits in order to set the proper bit.
- */
-#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
-
-
-/* RAID Online Capacity Expansion Structure */
-
-typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION
-{
- U32 Flags; /* 0x00 */
- U16 DevHandle0; /* 0x04 */
- U16 Reserved1; /* 0x06 */
- U16 DevHandle1; /* 0x08 */
- U16 Reserved2; /* 0x0A */
-} MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
- MPI2_POINTER PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
- Mpi2RaidOnlineCapacityExpansion_t,
- MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t;
-
-/* RAID Compatibility Input Structure */
-
-typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT {
- U16 SourceDevHandle; /* 0x00 */
- U16 CandidateDevHandle; /* 0x02 */
- U32 Flags; /* 0x04 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
-} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
-MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
-Mpi2RaidCompatibilityInputStruct_t,
-MPI2_POINTER pMpi2RaidCompatibilityInputStruct_t;
-
-/* defines for RAID Compatibility Structure Flags field */
-#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG (0x00000002)
-#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG (0x00000001)
-
-
-/* RAID Volume Indicator Structure */
-
-typedef struct _MPI2_RAID_VOL_INDICATOR
-{
- U64 TotalBlocks; /* 0x00 */
- U64 BlocksRemaining; /* 0x08 */
- U32 Flags; /* 0x10 */
- U32 ElapsedSeconds; /* 0x14 */
-} MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR,
- Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t;
-
-/* defines for RAID Volume Indicator Flags field */
-#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000)
-
-#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F)
-#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000)
-#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
-#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002)
-#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003)
-#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004)
-
-/* RAID Compatibility Result Structure */
-
-typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT {
- U8 State; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 GenericAttributes; /* 0x04 */
- U32 OEMSpecificAttributes; /* 0x08 */
- U32 Reserved3; /* 0x0C */
- U32 Reserved4; /* 0x10 */
-} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
-MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
-Mpi2RaidCompatibilityResultStruct_t,
-MPI2_POINTER pMpi2RaidCompatibilityResultStruct_t;
-
-/* defines for RAID Compatibility Result Structure State field */
-#define MPI2_RAID_COMPAT_STATE_COMPATIBLE (0x00)
-#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE (0x01)
-
-/* defines for RAID Compatibility Result Structure GenericAttributes field */
-#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR (0x00000010)
-
-#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK (0x0000000C)
-#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE (0x00000008)
-#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE (0x00000004)
-
-#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK (0x00000003)
-#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL (0x00000002)
-#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL (0x00000001)
-
-/* RAID Action Reply ActionData union */
-typedef union _MPI2_RAID_ACTION_REPLY_DATA
-{
- U32 Word[6];
- MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
- U16 VolDevHandle;
- U8 VolumeState;
- U8 PhysDiskNum;
- MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult;
-} MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA,
- Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t;
-
-/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
-
-
-/* RAID Action Reply Message */
-typedef struct _MPI2_RAID_ACTION_REPLY
-{
- U8 Action; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 VolDevHandle; /* 0x04 */
- U8 PhysDiskNum; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U16 Reserved3; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- MPI2_RAID_ACTION_REPLY_DATA ActionData; /* 0x14 */
-} MPI2_RAID_ACTION_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY,
- Mpi2RaidActionReply_t, MPI2_POINTER pMpi2RaidActionReply_t;
-
-
-#endif
-
+++ /dev/null
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_sas.h
- * Title: MPI Serial Attached SCSI structures and definitions
- * Creation Date: February 9, 2007
- *
- * mpi2_sas.h Version: 02.00.05
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
- * Control Request.
- * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
- * Request.
- * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
- * to MPI2_SGE_IO_UNION since it supports chained SGLs.
- * 05-12-10 02.00.04 Modified some comments.
- * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_SAS_H
-#define MPI2_SAS_H
-
-/*
- * Values for SASStatus.
- */
-#define MPI2_SASSTATUS_SUCCESS (0x00)
-#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01)
-#define MPI2_SASSTATUS_INVALID_FRAME (0x02)
-#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03)
-#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
-#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
-#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
-#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
-#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
-#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
-#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
-#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
-#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
-#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
-#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
-#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
-#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
-#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11)
-#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
-#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
-#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
-
-
-/*
- * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
- * data and SAS Configuration pages.
- */
-#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000)
-#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
-#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
-#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
-#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
-#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
-#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
-#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
-#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
-#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
-#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
-#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
-
-#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
-#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
-#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
-#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
-#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
-
-
-/*****************************************************************************
-*
-* SAS Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-* SMP Passthrough messages
-****************************************************************************/
-
-/* SMP Passthrough Request Message */
-typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST
-{
- U8 PassthroughFlags; /* 0x00 */
- U8 PhysicalPort; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 RequestDataLength; /* 0x04 */
- U8 SGLFlags; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U32 Reserved2; /* 0x0C */
- U64 SASAddress; /* 0x10 */
- U32 Reserved3; /* 0x18 */
- U32 Reserved4; /* 0x1C */
- MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */
-} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
- Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* SMP Passthrough Reply Message */
-typedef struct _MPI2_SMP_PASSTHROUGH_REPLY
-{
- U8 PassthroughFlags; /* 0x00 */
- U8 PhysicalPort; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 ResponseDataLength; /* 0x04 */
- U8 SGLFlags; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U8 Reserved2; /* 0x0C */
- U8 SASStatus; /* 0x0D */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 Reserved3; /* 0x14 */
- U8 ResponseData[4]; /* 0x18 */
-} MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY,
- Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
-
-/* values for SASStatus field are at the top of this file */
-
-
-/****************************************************************************
-* SATA Passthrough messages
-****************************************************************************/
-
-/* SATA Passthrough Request Message */
-typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST
-{
- U16 DevHandle; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 PassthroughFlags; /* 0x04 */
- U8 SGLFlags; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U32 Reserved2; /* 0x0C */
- U32 Reserved3; /* 0x10 */
- U32 Reserved4; /* 0x14 */
- U32 DataLength; /* 0x18 */
- U8 CommandFIS[20]; /* 0x1C */
- MPI2_SGE_IO_UNION SGL; /* 0x30 */
-} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
- Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* SATA Passthrough Reply Message */
-typedef struct _MPI2_SATA_PASSTHROUGH_REPLY
-{
- U16 DevHandle; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 PassthroughFlags; /* 0x04 */
- U8 SGLFlags; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U8 Reserved2; /* 0x0C */
- U8 SASStatus; /* 0x0D */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U8 StatusFIS[20]; /* 0x14 */
- U32 StatusControlRegisters; /* 0x28 */
- U32 TransferCount; /* 0x2C */
-} MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY,
- Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t;
-
-/* values for SASStatus field are at the top of this file */
-
-
-/****************************************************************************
-* SAS IO Unit Control messages
-****************************************************************************/
-
-/* SAS IO Unit Control Request Message */
-typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST
-{
- U8 Operation; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 DevHandle; /* 0x04 */
- U8 IOCParameter; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U16 Reserved4; /* 0x0C */
- U8 PhyNum; /* 0x0E */
- U8 PrimFlags; /* 0x0F */
- U32 Primitive; /* 0x10 */
- U8 LookupMethod; /* 0x14 */
- U8 Reserved5; /* 0x15 */
- U16 SlotNumber; /* 0x16 */
- U64 LookupAddress; /* 0x18 */
- U32 IOCParameterValue; /* 0x20 */
- U32 Reserved7; /* 0x24 */
- U32 Reserved8; /* 0x28 */
-} MPI2_SAS_IOUNIT_CONTROL_REQUEST,
- MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
- Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t;
-
-/* values for the Operation field */
-#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
-#define MPI2_SAS_OP_PHY_LINK_RESET (0x06)
-#define MPI2_SAS_OP_PHY_HARD_RESET (0x07)
-#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
-#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A)
-#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
-#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
-#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D)
-#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E)
-#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F)
-#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14)
-#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15)
-#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
-
-/* values for the PrimFlags field */
-#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08)
-#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02)
-#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01)
-
-/* values for the LookupMethod field */
-#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01)
-#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02)
-#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
-
-
-/* SAS IO Unit Control Reply Message */
-typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY
-{
- U8 Operation; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 DevHandle; /* 0x04 */
- U8 IOCParameter; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U16 Reserved4; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_SAS_IOUNIT_CONTROL_REPLY,
- MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
- Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t;
-
-
-#endif
-
-
+++ /dev/null
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_tool.h
- * Title: MPI diagnostic tool structures and definitions
- * Creation Date: March 26, 2007
- *
- * mpi2_tool.h Version: 02.00.12
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
- * structures and defines.
- * 02-29-08 02.00.02 Modified various names to make them 32-character unique.
- * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
- * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
- * and reply messages.
- * Added MPI2_DIAG_BUF_TYPE_EXTENDED.
- * Incremented MPI2_DIAG_BUF_TYPE_COUNT.
- * 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
- * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
- * Post Request.
- * 05-25-11 02.00.07 Added Flags field and related defines to
- * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
- * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
- * it uses MPI Chain SGE as well as MPI Simple SGE.
- * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
- * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_TOOL_H
-#define MPI2_TOOL_H
-
-/*****************************************************************************
-*
-* Toolbox Messages
-*
-*****************************************************************************/
-
-/* defines for the Tools */
-#define MPI2_TOOLBOX_CLEAN_TOOL (0x00)
-#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
-#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
-#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
-#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
-#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
-#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07)
-
-
-/****************************************************************************
-* Toolbox reply
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_REPLY
-{
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_TOOLBOX_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_REPLY,
- Mpi2ToolboxReply_t, MPI2_POINTER pMpi2ToolboxReply_t;
-
-
-/****************************************************************************
-* Toolbox Clean Tool request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST
-{
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 Flags; /* 0x0C */
- } MPI2_TOOLBOX_CLEAN_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
- Mpi2ToolboxCleanRequest_t, MPI2_POINTER pMpi2ToolboxCleanRequest_t;
-
-/* values for the Flags field */
-#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000)
-#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000)
-#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
-#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
-#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
-#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000)
-#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
-#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
-#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
-#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002)
-#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)
-
-
-/****************************************************************************
-* Toolbox Memory Move request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- MPI2_SGE_SIMPLE_UNION SGL; /* 0x0C */
-} MPI2_TOOLBOX_MEM_MOVE_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
- Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t;
-
-
-/****************************************************************************
-* Toolbox Diagnostic Data Upload request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 SGLFlags; /* 0x0C */
- U8 Reserved5; /* 0x0D */
- U16 Reserved6; /* 0x0E */
- U32 Flags; /* 0x10 */
- U32 DataLength; /* 0x14 */
- MPI2_SGE_SIMPLE_UNION SGL; /* 0x18 */
-} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
-MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
-Mpi2ToolboxDiagDataUploadRequest_t,
-MPI2_POINTER pMpi2ToolboxDiagDataUploadRequest_t;
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER {
- U32 DiagDataLength; /* 00h */
- U8 FormatCode; /* 04h */
- U8 Reserved1; /* 05h */
- U16 Reserved2; /* 06h */
-} MPI2_DIAG_DATA_UPLOAD_HEADER, MPI2_POINTER PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
-Mpi2DiagDataUploadHeader_t, MPI2_POINTER pMpi2DiagDataUploadHeader_t;
-
-
-/****************************************************************************
-* Toolbox ISTWI Read Write Tool
-****************************************************************************/
-
-/* Toolbox ISTWI Read Write Tool request message */
-typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 Reserved5; /* 0x0C */
- U32 Reserved6; /* 0x10 */
- U8 DevIndex; /* 0x14 */
- U8 Action; /* 0x15 */
- U8 SGLFlags; /* 0x16 */
- U8 Flags; /* 0x17 */
- U16 TxDataLength; /* 0x18 */
- U16 RxDataLength; /* 0x1A */
- U32 Reserved8; /* 0x1C */
- U32 Reserved9; /* 0x20 */
- U32 Reserved10; /* 0x24 */
- U32 Reserved11; /* 0x28 */
- U32 Reserved12; /* 0x2C */
- MPI2_SGE_SIMPLE_UNION SGL; /* 0x30 */
-} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
- MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
- Mpi2ToolboxIstwiReadWriteRequest_t,
- MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t;
-
-/* values for the Action field */
-#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01)
-#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02)
-#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03)
-#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10)
-#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11)
-#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-/* values for the Flags field */
-#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80)
-#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07)
-
-/* Toolbox ISTWI Read Write Tool reply message */
-typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U8 DevIndex; /* 0x14 */
- U8 Action; /* 0x15 */
- U8 IstwiStatus; /* 0x16 */
- U8 Reserved6; /* 0x17 */
- U16 TxDataCount; /* 0x18 */
- U16 RxDataCount; /* 0x1A */
-} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY,
- Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t;
-
-
-/****************************************************************************
-* Toolbox Beacon Tool request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_BEACON_REQUEST
-{
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 Reserved5; /* 0x0C */
- U8 PhysicalPort; /* 0x0D */
- U8 Reserved6; /* 0x0E */
- U8 Flags; /* 0x0F */
-} MPI2_TOOLBOX_BEACON_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_BEACON_REQUEST,
- Mpi2ToolboxBeaconRequest_t, MPI2_POINTER pMpi2ToolboxBeaconRequest_t;
-
-/* values for the Flags field */
-#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00)
-#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01)
-
-
-/****************************************************************************
-* Toolbox Diagnostic CLI Tool
-****************************************************************************/
-
-#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C)
-
-/* MPI v2.0 Toolbox Diagnostic CLI Tool request message */
-typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 SGLFlags; /* 0x0C */
- U8 Reserved5; /* 0x0D */
- U16 Reserved6; /* 0x0E */
- U32 DataLength; /* 0x10 */
- U8 DiagnosticCliCommand
- [MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */
- MPI2_MPI_SGE_IO_UNION SGL; /* 0x70 */
-} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
- MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
- Mpi2ToolboxDiagnosticCliRequest_t,
- MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t;
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* Toolbox Diagnostic CLI Tool reply message */
-typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 ReturnedDataLength; /* 0x14 */
-} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
- MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
- Mpi2ToolboxDiagnosticCliReply_t,
- MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t;
-
-
-/****************************************************************************
-* Toolbox Console Text Display Tool
-****************************************************************************/
-
-/* Toolbox Console Text Display Tool request message */
-typedef struct _MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 Console; /* 0x0C */
- U8 Flags; /* 0x0D */
- U16 Reserved6; /* 0x0E */
- U8 TextToDisplay[4]; /* 0x10 */
-} MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
-MPI2_POINTER PTR_MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
-Mpi2ToolboxTextDisplayRequest_t,
-MPI2_POINTER pMpi2ToolboxTextDisplayRequest_t;
-
-/* defines for the Console field */
-#define MPI2_TOOLBOX_CONSOLE_TYPE_MASK (0xF0)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_DEFAULT (0x00)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_UART (0x10)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_ETHERNET (0x20)
-
-#define MPI2_TOOLBOX_CONSOLE_NUMBER_MASK (0x0F)
-
-/* defines for the Flags field */
-#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01)
-
-
-
-/*****************************************************************************
-*
-* Diagnostic Buffer Messages
-*
-*****************************************************************************/
-
-
-/****************************************************************************
-* Diagnostic Buffer Post request
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST
-{
- U8 ExtendedType; /* 0x00 */
- U8 BufferType; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U64 BufferAddress; /* 0x0C */
- U32 BufferLength; /* 0x14 */
- U32 Reserved5; /* 0x18 */
- U32 Reserved6; /* 0x1C */
- U32 Flags; /* 0x20 */
- U32 ProductSpecific[23]; /* 0x24 */
-} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
- Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t;
-
-/* values for the ExtendedType field */
-#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02)
-
-/* values for the BufferType field */
-#define MPI2_DIAG_BUF_TYPE_TRACE (0x00)
-#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01)
-#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02)
-/* count of the number of buffer types */
-#define MPI2_DIAG_BUF_TYPE_COUNT (0x03)
-
-/* values for the Flags field */
-#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002)
-#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001)
-
-
-/****************************************************************************
-* Diagnostic Buffer Post reply
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_BUFFER_POST_REPLY
-{
- U8 ExtendedType; /* 0x00 */
- U8 BufferType; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 TransferLength; /* 0x14 */
-} MPI2_DIAG_BUFFER_POST_REPLY, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REPLY,
- Mpi2DiagBufferPostReply_t, MPI2_POINTER pMpi2DiagBufferPostReply_t;
-
-
-/****************************************************************************
-* Diagnostic Release request
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_RELEASE_REQUEST
-{
- U8 Reserved1; /* 0x00 */
- U8 BufferType; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
-} MPI2_DIAG_RELEASE_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REQUEST,
- Mpi2DiagReleaseRequest_t, MPI2_POINTER pMpi2DiagReleaseRequest_t;
-
-
-/****************************************************************************
-* Diagnostic Buffer Post reply
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_RELEASE_REPLY
-{
- U8 Reserved1; /* 0x00 */
- U8 BufferType; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_DIAG_RELEASE_REPLY, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REPLY,
- Mpi2DiagReleaseReply_t, MPI2_POINTER pMpi2DiagReleaseReply_t;
-
-
-#endif
-
+++ /dev/null
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_type.h
- * Title: MPI basic type definitions
- * Creation Date: August 16, 2006
- *
- * mpi2_type.h Version: 02.00.00
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_TYPE_H
-#define MPI2_TYPE_H
-
-
-/*******************************************************************************
- * Define MPI2_POINTER if it hasn't already been defined. By default
- * MPI2_POINTER is defined to be a near pointer. MPI2_POINTER can be defined as
- * a far pointer by defining MPI2_POINTER as "far *" before this header file is
- * included.
- */
-#ifndef MPI2_POINTER
-#define MPI2_POINTER *
-#endif
-
-/* the basic types may have already been included by mpi_type.h */
-#ifndef MPI_TYPE_H
-/*****************************************************************************
-*
-* Basic Types
-*
-*****************************************************************************/
-
-typedef u8 U8;
-typedef __le16 U16;
-typedef __le32 U32;
-typedef __le64 U64 __attribute__((aligned(4)));
-
-/*****************************************************************************
-*
-* Pointer Types
-*
-*****************************************************************************/
-
-typedef U8 *PU8;
-typedef U16 *PU16;
-typedef U32 *PU32;
-typedef U64 *PU64;
-
-#endif
-
-#endif
-
+++ /dev/null
-/*
- * This is the Fusion MPT base driver providing common API layer interface
- * for access to MPT (Message Passing Technology) firmware.
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/sort.h>
-#include <linux/io.h>
-#include <linux/time.h>
-#include <linux/kthread.h>
-#include <linux/aer.h>
-
-#include "mpt2sas_base.h"
-
-static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS];
-
-#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
-
-#define MAX_HBA_QUEUE_DEPTH 30000
-#define MAX_CHAIN_DEPTH 100000
-static int max_queue_depth = -1;
-module_param(max_queue_depth, int, 0);
-MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
-
-static int max_sgl_entries = -1;
-module_param(max_sgl_entries, int, 0);
-MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
-
-static int msix_disable = -1;
-module_param(msix_disable, int, 0);
-MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
-
-static int max_msix_vectors = -1;
-module_param(max_msix_vectors, int, 0);
-MODULE_PARM_DESC(max_msix_vectors, " max msix vectors ");
-
-static int mpt2sas_fwfault_debug;
-MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
- "and halt firmware - (default=0)");
-
-static int disable_discovery = -1;
-module_param(disable_discovery, int, 0);
-MODULE_PARM_DESC(disable_discovery, " disable discovery ");
-
-static int
-_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag);
-
-static int
-_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag);
-
-/**
- * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
- *
- */
-static int
-_scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
-{
- int ret = param_set_int(val, kp);
- struct MPT2SAS_ADAPTER *ioc;
-
- if (ret)
- return ret;
-
- /* global ioc spinlock to protect controller list on list operations */
- printk(KERN_INFO "setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug);
- spin_lock(&gioc_lock);
- list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
- ioc->fwfault_debug = mpt2sas_fwfault_debug;
- spin_unlock(&gioc_lock);
- return 0;
-}
-
-module_param_call(mpt2sas_fwfault_debug, _scsih_set_fwfault_debug,
- param_get_int, &mpt2sas_fwfault_debug, 0644);
-
-/**
- * mpt2sas_remove_dead_ioc_func - kthread context to remove dead ioc
- * @arg: input argument, used to derive ioc
- *
- * Return 0 if controller is removed from pci subsystem.
- * Return -1 for other case.
- */
-static int mpt2sas_remove_dead_ioc_func(void *arg)
-{
- struct MPT2SAS_ADAPTER *ioc = (struct MPT2SAS_ADAPTER *)arg;
- struct pci_dev *pdev;
-
- if ((ioc == NULL))
- return -1;
-
- pdev = ioc->pdev;
- if ((pdev == NULL))
- return -1;
- pci_stop_and_remove_bus_device_locked(pdev);
- return 0;
-}
-
-
-/**
- * _base_fault_reset_work - workq handling ioc fault conditions
- * @work: input argument, used to derive ioc
- * Context: sleep.
- *
- * Return nothing.
- */
-static void
-_base_fault_reset_work(struct work_struct *work)
-{
- struct MPT2SAS_ADAPTER *ioc =
- container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work);
- unsigned long flags;
- u32 doorbell;
- int rc;
- struct task_struct *p;
-
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->shost_recovery || ioc->pci_error_recovery)
- goto rearm_timer;
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-
- doorbell = mpt2sas_base_get_iocstate(ioc, 0);
- if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
- printk(MPT2SAS_INFO_FMT "%s : SAS host is non-operational !!!!\n",
- ioc->name, __func__);
-
- /* It may be possible that EEH recovery can resolve some of
- * pci bus failure issues rather removing the dead ioc function
- * by considering controller is in a non-operational state. So
- * here priority is given to the EEH recovery. If it doesn't
- * not resolve this issue, mpt2sas driver will consider this
- * controller to non-operational state and remove the dead ioc
- * function.
- */
- if (ioc->non_operational_loop++ < 5) {
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
- flags);
- goto rearm_timer;
- }
-
- /*
- * Call _scsih_flush_pending_cmds callback so that we flush all
- * pending commands back to OS. This call is required to aovid
- * deadlock at block layer. Dead IOC will fail to do diag reset,
- * and this call is safe since dead ioc will never return any
- * command back from HW.
- */
- ioc->schedule_dead_ioc_flush_running_cmds(ioc);
- /*
- * Set remove_host flag early since kernel thread will
- * take some time to execute.
- */
- ioc->remove_host = 1;
- /*Remove the Dead Host */
- p = kthread_run(mpt2sas_remove_dead_ioc_func, ioc,
- "mpt2sas_dead_ioc_%d", ioc->id);
- if (IS_ERR(p)) {
- printk(MPT2SAS_ERR_FMT
- "%s: Running mpt2sas_dead_ioc thread failed !!!!\n",
- ioc->name, __func__);
- } else {
- printk(MPT2SAS_ERR_FMT
- "%s: Running mpt2sas_dead_ioc thread success !!!!\n",
- ioc->name, __func__);
- }
-
- return; /* don't rearm timer */
- }
-
- ioc->non_operational_loop = 0;
-
- if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
- rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name,
- __func__, (rc == 0) ? "success" : "failed");
- doorbell = mpt2sas_base_get_iocstate(ioc, 0);
- if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
- mpt2sas_base_fault_info(ioc, doorbell &
- MPI2_DOORBELL_DATA_MASK);
- }
-
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- rearm_timer:
- if (ioc->fault_reset_work_q)
- queue_delayed_work(ioc->fault_reset_work_q,
- &ioc->fault_reset_work,
- msecs_to_jiffies(FAULT_POLLING_INTERVAL));
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-}
-
-/**
- * mpt2sas_base_start_watchdog - start the fault_reset_work_q
- * @ioc: per adapter object
- * Context: sleep.
- *
- * Return nothing.
- */
-void
-mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
-{
- unsigned long flags;
-
- if (ioc->fault_reset_work_q)
- return;
-
- /* initialize fault polling */
- INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
- snprintf(ioc->fault_reset_work_q_name,
- sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
- ioc->fault_reset_work_q =
- create_singlethread_workqueue(ioc->fault_reset_work_q_name);
- if (!ioc->fault_reset_work_q) {
- printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
- ioc->name, __func__, __LINE__);
- return;
- }
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->fault_reset_work_q)
- queue_delayed_work(ioc->fault_reset_work_q,
- &ioc->fault_reset_work,
- msecs_to_jiffies(FAULT_POLLING_INTERVAL));
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-}
-
-/**
- * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
- * @ioc: per adapter object
- * Context: sleep.
- *
- * Return nothing.
- */
-void
-mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
-{
- unsigned long flags;
- struct workqueue_struct *wq;
-
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- wq = ioc->fault_reset_work_q;
- ioc->fault_reset_work_q = NULL;
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
- if (wq) {
- if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
- flush_workqueue(wq);
- destroy_workqueue(wq);
- }
-}
-
-/**
- * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
- * @ioc: per adapter object
- * @fault_code: fault code
- *
- * Return nothing.
- */
-void
-mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code)
-{
- printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n",
- ioc->name, fault_code);
-}
-
-/**
- * mpt2sas_halt_firmware - halt's mpt controller firmware
- * @ioc: per adapter object
- *
- * For debugging timeout related issues. Writing 0xCOFFEE00
- * to the doorbell register will halt controller firmware. With
- * the purpose to stop both driver and firmware, the enduser can
- * obtain a ring buffer from controller UART.
- */
-void
-mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc)
-{
- u32 doorbell;
-
- if (!ioc->fwfault_debug)
- return;
-
- dump_stack();
-
- doorbell = readl(&ioc->chip->Doorbell);
- if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
- mpt2sas_base_fault_info(ioc , doorbell);
- else {
- writel(0xC0FFEE00, &ioc->chip->Doorbell);
- printk(MPT2SAS_ERR_FMT "Firmware is halted due to command "
- "timeout\n", ioc->name);
- }
-
- panic("panic in %s\n", __func__);
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _base_sas_ioc_info - verbose translation of the ioc status
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @request_hdr: request mf
- *
- * Return nothing.
- */
-static void
-_base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
- MPI2RequestHeader_t *request_hdr)
-{
- u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- char *desc = NULL;
- u16 frame_sz;
- char *func_str = NULL;
-
- /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
- if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
- request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
- request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
- return;
-
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- return;
-
- switch (ioc_status) {
-
-/****************************************************************************
-* Common IOCStatus values for all replies
-****************************************************************************/
-
- case MPI2_IOCSTATUS_INVALID_FUNCTION:
- desc = "invalid function";
- break;
- case MPI2_IOCSTATUS_BUSY:
- desc = "busy";
- break;
- case MPI2_IOCSTATUS_INVALID_SGL:
- desc = "invalid sgl";
- break;
- case MPI2_IOCSTATUS_INTERNAL_ERROR:
- desc = "internal error";
- break;
- case MPI2_IOCSTATUS_INVALID_VPID:
- desc = "invalid vpid";
- break;
- case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
- desc = "insufficient resources";
- break;
- case MPI2_IOCSTATUS_INVALID_FIELD:
- desc = "invalid field";
- break;
- case MPI2_IOCSTATUS_INVALID_STATE:
- desc = "invalid state";
- break;
- case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
- desc = "op state not supported";
- break;
-
-/****************************************************************************
-* Config IOCStatus values
-****************************************************************************/
-
- case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
- desc = "config invalid action";
- break;
- case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
- desc = "config invalid type";
- break;
- case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
- desc = "config invalid page";
- break;
- case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
- desc = "config invalid data";
- break;
- case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
- desc = "config no defaults";
- break;
- case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
- desc = "config cant commit";
- break;
-
-/****************************************************************************
-* SCSI IO Reply
-****************************************************************************/
-
- case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
- case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
- case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
- case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
- case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
- case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
- case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
- case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
- case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
- case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
- case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
- case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
- break;
-
-/****************************************************************************
-* For use by SCSI Initiator and SCSI Target end-to-end data protection
-****************************************************************************/
-
- case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
- desc = "eedp guard error";
- break;
- case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
- desc = "eedp ref tag error";
- break;
- case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
- desc = "eedp app tag error";
- break;
-
-/****************************************************************************
-* SCSI Target values
-****************************************************************************/
-
- case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
- desc = "target invalid io index";
- break;
- case MPI2_IOCSTATUS_TARGET_ABORTED:
- desc = "target aborted";
- break;
- case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
- desc = "target no conn retryable";
- break;
- case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
- desc = "target no connection";
- break;
- case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
- desc = "target xfer count mismatch";
- break;
- case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
- desc = "target data offset error";
- break;
- case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
- desc = "target too much write data";
- break;
- case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
- desc = "target iu too short";
- break;
- case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
- desc = "target ack nak timeout";
- break;
- case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
- desc = "target nak received";
- break;
-
-/****************************************************************************
-* Serial Attached SCSI values
-****************************************************************************/
-
- case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
- desc = "smp request failed";
- break;
- case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
- desc = "smp data overrun";
- break;
-
-/****************************************************************************
-* Diagnostic Buffer Post / Diagnostic Release values
-****************************************************************************/
-
- case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
- desc = "diagnostic released";
- break;
- default:
- break;
- }
-
- if (!desc)
- return;
-
- switch (request_hdr->Function) {
- case MPI2_FUNCTION_CONFIG:
- frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
- func_str = "config_page";
- break;
- case MPI2_FUNCTION_SCSI_TASK_MGMT:
- frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
- func_str = "task_mgmt";
- break;
- case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
- frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
- func_str = "sas_iounit_ctl";
- break;
- case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
- frame_sz = sizeof(Mpi2SepRequest_t);
- func_str = "enclosure";
- break;
- case MPI2_FUNCTION_IOC_INIT:
- frame_sz = sizeof(Mpi2IOCInitRequest_t);
- func_str = "ioc_init";
- break;
- case MPI2_FUNCTION_PORT_ENABLE:
- frame_sz = sizeof(Mpi2PortEnableRequest_t);
- func_str = "port_enable";
- break;
- case MPI2_FUNCTION_SMP_PASSTHROUGH:
- frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
- func_str = "smp_passthru";
- break;
- default:
- frame_sz = 32;
- func_str = "unknown";
- break;
- }
-
- printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p),"
- " (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str);
-
- _debug_dump_mf(request_hdr, frame_sz/4);
-}
-
-/**
- * _base_display_event_data - verbose translation of firmware asyn events
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- *
- * Return nothing.
- */
-static void
-_base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventNotificationReply_t *mpi_reply)
-{
- char *desc = NULL;
- u16 event;
-
- if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
- return;
-
- event = le16_to_cpu(mpi_reply->Event);
-
- switch (event) {
- case MPI2_EVENT_LOG_DATA:
- desc = "Log Data";
- break;
- case MPI2_EVENT_STATE_CHANGE:
- desc = "Status Change";
- break;
- case MPI2_EVENT_HARD_RESET_RECEIVED:
- desc = "Hard Reset Received";
- break;
- case MPI2_EVENT_EVENT_CHANGE:
- desc = "Event Change";
- break;
- case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
- desc = "Device Status Change";
- break;
- case MPI2_EVENT_IR_OPERATION_STATUS:
- if (!ioc->hide_ir_msg)
- desc = "IR Operation Status";
- break;
- case MPI2_EVENT_SAS_DISCOVERY:
- {
- Mpi2EventDataSasDiscovery_t *event_data =
- (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
- printk(MPT2SAS_INFO_FMT "Discovery: (%s)", ioc->name,
- (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
- "start" : "stop");
- if (event_data->DiscoveryStatus)
- printk("discovery_status(0x%08x)",
- le32_to_cpu(event_data->DiscoveryStatus));
- printk("\n");
- return;
- }
- case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
- desc = "SAS Broadcast Primitive";
- break;
- case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
- desc = "SAS Init Device Status Change";
- break;
- case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
- desc = "SAS Init Table Overflow";
- break;
- case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
- desc = "SAS Topology Change List";
- break;
- case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
- desc = "SAS Enclosure Device Status Change";
- break;
- case MPI2_EVENT_IR_VOLUME:
- if (!ioc->hide_ir_msg)
- desc = "IR Volume";
- break;
- case MPI2_EVENT_IR_PHYSICAL_DISK:
- if (!ioc->hide_ir_msg)
- desc = "IR Physical Disk";
- break;
- case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
- if (!ioc->hide_ir_msg)
- desc = "IR Configuration Change List";
- break;
- case MPI2_EVENT_LOG_ENTRY_ADDED:
- if (!ioc->hide_ir_msg)
- desc = "Log Entry Added";
- break;
- case MPI2_EVENT_TEMP_THRESHOLD:
- desc = "Temperature Threshold";
- break;
- }
-
- if (!desc)
- return;
-
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc);
-}
-#endif
-
-/**
- * _base_sas_log_info - verbose translation of firmware log info
- * @ioc: per adapter object
- * @log_info: log info
- *
- * Return nothing.
- */
-static void
-_base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
-{
- union loginfo_type {
- u32 loginfo;
- struct {
- u32 subcode:16;
- u32 code:8;
- u32 originator:4;
- u32 bus_type:4;
- } dw;
- };
- union loginfo_type sas_loginfo;
- char *originator_str = NULL;
-
- sas_loginfo.loginfo = log_info;
- if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
- return;
-
- /* each nexus loss loginfo */
- if (log_info == 0x31170000)
- return;
-
- /* eat the loginfos associated with task aborts */
- if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
- 0x31140000 || log_info == 0x31130000))
- return;
-
- switch (sas_loginfo.dw.originator) {
- case 0:
- originator_str = "IOP";
- break;
- case 1:
- originator_str = "PL";
- break;
- case 2:
- if (!ioc->hide_ir_msg)
- originator_str = "IR";
- else
- originator_str = "WarpDrive";
- break;
- }
-
- printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), "
- "code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info,
- originator_str, sas_loginfo.dw.code,
- sas_loginfo.dw.subcode);
-}
-
-/**
- * _base_display_reply_info -
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Return nothing.
- */
-static void
-_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply)
-{
- MPI2DefaultReply_t *mpi_reply;
- u16 ioc_status;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (unlikely(!mpi_reply)) {
- printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
- (ioc->logging_level & MPT_DEBUG_REPLY)) {
- _base_sas_ioc_info(ioc , mpi_reply,
- mpt2sas_base_get_msg_frame(ioc, smid));
- }
-#endif
- if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
- _base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo));
-}
-
-/**
- * mpt2sas_base_done - base internal command completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-u8
-mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply)
-{
- MPI2DefaultReply_t *mpi_reply;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
- return 1;
-
- if (ioc->base_cmds.status == MPT2_CMD_NOT_USED)
- return 1;
-
- ioc->base_cmds.status |= MPT2_CMD_COMPLETE;
- if (mpi_reply) {
- ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID;
- memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
- }
- ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
-
- complete(&ioc->base_cmds.done);
- return 1;
-}
-
-/**
- * _base_async_event - main callback handler for firmware asyn events
- * @ioc: per adapter object
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Returns void.
- */
-static void
-_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
-{
- Mpi2EventNotificationReply_t *mpi_reply;
- Mpi2EventAckRequest_t *ack_request;
- u16 smid;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (!mpi_reply)
- return;
- if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
- return;
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- _base_display_event_data(ioc, mpi_reply);
-#endif
- if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
- goto out;
- smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- goto out;
- }
-
- ack_request = mpt2sas_base_get_msg_frame(ioc, smid);
- memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
- ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
- ack_request->Event = mpi_reply->Event;
- ack_request->EventContext = mpi_reply->EventContext;
- ack_request->VF_ID = 0; /* TODO */
- ack_request->VP_ID = 0;
- mpt2sas_base_put_smid_default(ioc, smid);
-
- out:
-
- /* scsih callback handler */
- mpt2sas_scsih_event_callback(ioc, msix_index, reply);
-
- /* ctl callback handler */
- mpt2sas_ctl_event_callback(ioc, msix_index, reply);
-
- return;
-}
-
-/**
- * _base_get_cb_idx - obtain the callback index
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return callback index.
- */
-static u8
-_base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- int i;
- u8 cb_idx;
-
- if (smid < ioc->hi_priority_smid) {
- i = smid - 1;
- cb_idx = ioc->scsi_lookup[i].cb_idx;
- } else if (smid < ioc->internal_smid) {
- i = smid - ioc->hi_priority_smid;
- cb_idx = ioc->hpr_lookup[i].cb_idx;
- } else if (smid <= ioc->hba_queue_depth) {
- i = smid - ioc->internal_smid;
- cb_idx = ioc->internal_lookup[i].cb_idx;
- } else
- cb_idx = 0xFF;
- return cb_idx;
-}
-
-/**
- * _base_mask_interrupts - disable interrupts
- * @ioc: per adapter object
- *
- * Disabling ResetIRQ, Reply and Doorbell Interrupts
- *
- * Return nothing.
- */
-static void
-_base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc)
-{
- u32 him_register;
-
- ioc->mask_interrupts = 1;
- him_register = readl(&ioc->chip->HostInterruptMask);
- him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
- writel(him_register, &ioc->chip->HostInterruptMask);
- readl(&ioc->chip->HostInterruptMask);
-}
-
-/**
- * _base_unmask_interrupts - enable interrupts
- * @ioc: per adapter object
- *
- * Enabling only Reply Interrupts
- *
- * Return nothing.
- */
-static void
-_base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc)
-{
- u32 him_register;
-
- him_register = readl(&ioc->chip->HostInterruptMask);
- him_register &= ~MPI2_HIM_RIM;
- writel(him_register, &ioc->chip->HostInterruptMask);
- ioc->mask_interrupts = 0;
-}
-
-union reply_descriptor {
- u64 word;
- struct {
- u32 low;
- u32 high;
- } u;
-};
-
-/**
- * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
- * @irq: irq number (not used)
- * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
- * @r: pt_regs pointer (not used)
- *
- * Return IRQ_HANDLE if processed, else IRQ_NONE.
- */
-static irqreturn_t
-_base_interrupt(int irq, void *bus_id)
-{
- struct adapter_reply_queue *reply_q = bus_id;
- union reply_descriptor rd;
- u32 completed_cmds;
- u8 request_desript_type;
- u16 smid;
- u8 cb_idx;
- u32 reply;
- u8 msix_index = reply_q->msix_index;
- struct MPT2SAS_ADAPTER *ioc = reply_q->ioc;
- Mpi2ReplyDescriptorsUnion_t *rpf;
- u8 rc;
-
- if (ioc->mask_interrupts)
- return IRQ_NONE;
-
- if (!atomic_add_unless(&reply_q->busy, 1, 1))
- return IRQ_NONE;
-
- rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
- request_desript_type = rpf->Default.ReplyFlags
- & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
- if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
- atomic_dec(&reply_q->busy);
- return IRQ_NONE;
- }
-
- completed_cmds = 0;
- cb_idx = 0xFF;
- do {
- rd.word = le64_to_cpu(rpf->Words);
- if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
- goto out;
- reply = 0;
- smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
- if (request_desript_type ==
- MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
- reply = le32_to_cpu
- (rpf->AddressReply.ReplyFrameAddress);
- if (reply > ioc->reply_dma_max_address ||
- reply < ioc->reply_dma_min_address)
- reply = 0;
- } else if (request_desript_type ==
- MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER)
- goto next;
- else if (request_desript_type ==
- MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS)
- goto next;
- if (smid) {
- cb_idx = _base_get_cb_idx(ioc, smid);
- if ((likely(cb_idx < MPT_MAX_CALLBACKS))
- && (likely(mpt_callbacks[cb_idx] != NULL))) {
- rc = mpt_callbacks[cb_idx](ioc, smid,
- msix_index, reply);
- if (reply)
- _base_display_reply_info(ioc, smid,
- msix_index, reply);
- if (rc)
- mpt2sas_base_free_smid(ioc, smid);
- }
- }
- if (!smid)
- _base_async_event(ioc, msix_index, reply);
-
- /* reply free queue handling */
- if (reply) {
- ioc->reply_free_host_index =
- (ioc->reply_free_host_index ==
- (ioc->reply_free_queue_depth - 1)) ?
- 0 : ioc->reply_free_host_index + 1;
- ioc->reply_free[ioc->reply_free_host_index] =
- cpu_to_le32(reply);
- wmb();
- writel(ioc->reply_free_host_index,
- &ioc->chip->ReplyFreeHostIndex);
- }
-
- next:
-
- rpf->Words = cpu_to_le64(ULLONG_MAX);
- reply_q->reply_post_host_index =
- (reply_q->reply_post_host_index ==
- (ioc->reply_post_queue_depth - 1)) ? 0 :
- reply_q->reply_post_host_index + 1;
- request_desript_type =
- reply_q->reply_post_free[reply_q->reply_post_host_index].
- Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
- completed_cmds++;
- if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
- goto out;
- if (!reply_q->reply_post_host_index)
- rpf = reply_q->reply_post_free;
- else
- rpf++;
- } while (1);
-
- out:
-
- if (!completed_cmds) {
- atomic_dec(&reply_q->busy);
- return IRQ_NONE;
- }
- wmb();
- if (ioc->is_warpdrive) {
- writel(reply_q->reply_post_host_index,
- ioc->reply_post_host_index[msix_index]);
- atomic_dec(&reply_q->busy);
- return IRQ_HANDLED;
- }
- writel(reply_q->reply_post_host_index | (msix_index <<
- MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
- atomic_dec(&reply_q->busy);
- return IRQ_HANDLED;
-}
-
-/**
- * _base_is_controller_msix_enabled - is controller support muli-reply queues
- * @ioc: per adapter object
- *
- */
-static inline int
-_base_is_controller_msix_enabled(struct MPT2SAS_ADAPTER *ioc)
-{
- return (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
-}
-
-/**
- * mpt2sas_base_flush_reply_queues - flushing the MSIX reply queues
- * @ioc: per adapter object
- * Context: ISR conext
- *
- * Called when a Task Management request has completed. We want
- * to flush the other reply queues so all the outstanding IO has been
- * completed back to OS before we process the TM completetion.
- *
- * Return nothing.
- */
-void
-mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc)
-{
- struct adapter_reply_queue *reply_q;
-
- /* If MSIX capability is turned off
- * then multi-queues are not enabled
- */
- if (!_base_is_controller_msix_enabled(ioc))
- return;
-
- list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
- if (ioc->shost_recovery)
- return;
- /* TMs are on msix_index == 0 */
- if (reply_q->msix_index == 0)
- continue;
- _base_interrupt(reply_q->vector, (void *)reply_q);
- }
-}
-
-/**
- * mpt2sas_base_release_callback_handler - clear interrupt callback handler
- * @cb_idx: callback index
- *
- * Return nothing.
- */
-void
-mpt2sas_base_release_callback_handler(u8 cb_idx)
-{
- mpt_callbacks[cb_idx] = NULL;
-}
-
-/**
- * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler
- * @cb_func: callback function
- *
- * Returns cb_func.
- */
-u8
-mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func)
-{
- u8 cb_idx;
-
- for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
- if (mpt_callbacks[cb_idx] == NULL)
- break;
-
- mpt_callbacks[cb_idx] = cb_func;
- return cb_idx;
-}
-
-/**
- * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler
- *
- * Return nothing.
- */
-void
-mpt2sas_base_initialize_callback_handler(void)
-{
- u8 cb_idx;
-
- for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
- mpt2sas_base_release_callback_handler(cb_idx);
-}
-
-/**
- * mpt2sas_base_build_zero_len_sge - build zero length sg entry
- * @ioc: per adapter object
- * @paddr: virtual address for SGE
- *
- * Create a zero length scatter gather entry to insure the IOCs hardware has
- * something to use if the target device goes brain dead and tries
- * to send data even when none is asked for.
- *
- * Return nothing.
- */
-void
-mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr)
-{
- u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
- MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
- MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
- MPI2_SGE_FLAGS_SHIFT);
- ioc->base_add_sg_single(paddr, flags_length, -1);
-}
-
-/**
- * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
- * @paddr: virtual address for SGE
- * @flags_length: SGE flags and data transfer length
- * @dma_addr: Physical address
- *
- * Return nothing.
- */
-static void
-_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
-{
- Mpi2SGESimple32_t *sgel = paddr;
-
- flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
- MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
- sgel->FlagsLength = cpu_to_le32(flags_length);
- sgel->Address = cpu_to_le32(dma_addr);
-}
-
-
-/**
- * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
- * @paddr: virtual address for SGE
- * @flags_length: SGE flags and data transfer length
- * @dma_addr: Physical address
- *
- * Return nothing.
- */
-static void
-_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
-{
- Mpi2SGESimple64_t *sgel = paddr;
-
- flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
- MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
- sgel->FlagsLength = cpu_to_le32(flags_length);
- sgel->Address = cpu_to_le64(dma_addr);
-}
-
-#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
-
-/**
- * _base_config_dma_addressing - set dma addressing
- * @ioc: per adapter object
- * @pdev: PCI device struct
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
-{
- struct sysinfo s;
- u64 consistent_dma_mask;
-
- if (ioc->dma_mask)
- consistent_dma_mask = DMA_BIT_MASK(64);
- else
- consistent_dma_mask = DMA_BIT_MASK(32);
-
- if (sizeof(dma_addr_t) > 4) {
- const uint64_t required_mask =
- dma_get_required_mask(&pdev->dev);
- if ((required_mask > DMA_BIT_MASK(32)) &&
- !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
- !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
- ioc->base_add_sg_single = &_base_add_sg_single_64;
- ioc->sge_size = sizeof(Mpi2SGESimple64_t);
- ioc->dma_mask = 64;
- goto out;
- }
- }
-
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
- && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
- ioc->base_add_sg_single = &_base_add_sg_single_32;
- ioc->sge_size = sizeof(Mpi2SGESimple32_t);
- ioc->dma_mask = 32;
- } else
- return -ENODEV;
-
- out:
- si_meminfo(&s);
- printk(MPT2SAS_INFO_FMT
- "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
- ioc->name, ioc->dma_mask, convert_to_kb(s.totalram));
-
- return 0;
-}
-
-static int
-_base_change_consistent_dma_mask(struct MPT2SAS_ADAPTER *ioc,
- struct pci_dev *pdev)
-{
- if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
- if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
- return -ENODEV;
- }
- return 0;
-}
-/**
- * _base_check_enable_msix - checks MSIX capabable.
- * @ioc: per adapter object
- *
- * Check to see if card is capable of MSIX, and set number
- * of available msix vectors
- */
-static int
-_base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
-{
- int base;
- u16 message_control;
-
-
- /* Check whether controller SAS2008 B0 controller,
- if it is SAS2008 B0 controller use IO-APIC instead of MSIX */
- if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
- ioc->pdev->revision == 0x01) {
- return -EINVAL;
- }
-
- base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
- if (!base) {
- dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
- "supported\n", ioc->name));
- return -EINVAL;
- }
-
- /* get msix vector count */
- /* NUMA_IO not supported for older controllers */
- if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
- ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
- ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
- ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
- ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
- ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
- ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
- ioc->msix_vector_count = 1;
- else {
- pci_read_config_word(ioc->pdev, base + 2, &message_control);
- ioc->msix_vector_count = (message_control & 0x3FF) + 1;
- }
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, "
- "vector_count(%d)\n", ioc->name, ioc->msix_vector_count));
-
- return 0;
-}
-
-/**
- * _base_free_irq - free irq
- * @ioc: per adapter object
- *
- * Freeing respective reply_queue from the list.
- */
-static void
-_base_free_irq(struct MPT2SAS_ADAPTER *ioc)
-{
- struct adapter_reply_queue *reply_q, *next;
-
- if (list_empty(&ioc->reply_queue_list))
- return;
-
- list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
- list_del(&reply_q->list);
- irq_set_affinity_hint(reply_q->vector, NULL);
- free_cpumask_var(reply_q->affinity_hint);
- synchronize_irq(reply_q->vector);
- free_irq(reply_q->vector, reply_q);
- kfree(reply_q);
- }
-}
-
-/**
- * _base_request_irq - request irq
- * @ioc: per adapter object
- * @index: msix index into vector table
- * @vector: irq vector
- *
- * Inserting respective reply_queue into the list.
- */
-static int
-_base_request_irq(struct MPT2SAS_ADAPTER *ioc, u8 index, u32 vector)
-{
- struct adapter_reply_queue *reply_q;
- int r;
-
- reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
- if (!reply_q) {
- printk(MPT2SAS_ERR_FMT "unable to allocate memory %d!\n",
- ioc->name, (int)sizeof(struct adapter_reply_queue));
- return -ENOMEM;
- }
- reply_q->ioc = ioc;
- reply_q->msix_index = index;
- reply_q->vector = vector;
-
- if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
- return -ENOMEM;
- cpumask_clear(reply_q->affinity_hint);
-
- atomic_set(&reply_q->busy, 0);
- if (ioc->msix_enable)
- snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
- MPT2SAS_DRIVER_NAME, ioc->id, index);
- else
- snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
- MPT2SAS_DRIVER_NAME, ioc->id);
- r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
- reply_q);
- if (r) {
- printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n",
- reply_q->name, vector);
- kfree(reply_q);
- return -EBUSY;
- }
-
- INIT_LIST_HEAD(&reply_q->list);
- list_add_tail(&reply_q->list, &ioc->reply_queue_list);
- return 0;
-}
-
-/**
- * _base_assign_reply_queues - assigning msix index for each cpu
- * @ioc: per adapter object
- *
- * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
- *
- * It would nice if we could call irq_set_affinity, however it is not
- * an exported symbol
- */
-static void
-_base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
-{
- unsigned int cpu, nr_cpus, nr_msix, index = 0;
- struct adapter_reply_queue *reply_q;
-
- if (!_base_is_controller_msix_enabled(ioc))
- return;
-
- memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
-
- nr_cpus = num_online_cpus();
- nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count,
- ioc->facts.MaxMSIxVectors);
- if (!nr_msix)
- return;
-
- cpu = cpumask_first(cpu_online_mask);
-
- list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
-
- unsigned int i, group = nr_cpus / nr_msix;
-
- if (cpu >= nr_cpus)
- break;
-
- if (index < nr_cpus % nr_msix)
- group++;
-
- for (i = 0 ; i < group ; i++) {
- ioc->cpu_msix_table[cpu] = index;
- cpumask_or(reply_q->affinity_hint,
- reply_q->affinity_hint, get_cpu_mask(cpu));
- cpu = cpumask_next(cpu, cpu_online_mask);
- }
-
- if (irq_set_affinity_hint(reply_q->vector,
- reply_q->affinity_hint))
- dinitprintk(ioc, pr_info(MPT2SAS_FMT
- "error setting affinity hint for irq vector %d\n",
- ioc->name, reply_q->vector));
- index++;
- }
-}
-
-/**
- * _base_disable_msix - disables msix
- * @ioc: per adapter object
- *
- */
-static void
-_base_disable_msix(struct MPT2SAS_ADAPTER *ioc)
-{
- if (ioc->msix_enable) {
- pci_disable_msix(ioc->pdev);
- ioc->msix_enable = 0;
- }
-}
-
-/**
- * _base_enable_msix - enables msix, failback to io_apic
- * @ioc: per adapter object
- *
- */
-static int
-_base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
-{
- struct msix_entry *entries, *a;
- int r;
- int i;
- u8 try_msix = 0;
-
- if (msix_disable == -1 || msix_disable == 0)
- try_msix = 1;
-
- if (!try_msix)
- goto try_ioapic;
-
- if (_base_check_enable_msix(ioc) != 0)
- goto try_ioapic;
-
- ioc->reply_queue_count = min_t(int, ioc->cpu_count,
- ioc->msix_vector_count);
-
- if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
- max_msix_vectors = 8;
-
- if (max_msix_vectors > 0) {
- ioc->reply_queue_count = min_t(int, max_msix_vectors,
- ioc->reply_queue_count);
- ioc->msix_vector_count = ioc->reply_queue_count;
- } else if (max_msix_vectors == 0)
- goto try_ioapic;
-
- printk(MPT2SAS_INFO_FMT
- "MSI-X vectors supported: %d, no of cores: %d, max_msix_vectors: %d\n",
- ioc->name, ioc->msix_vector_count, ioc->cpu_count, max_msix_vectors);
-
- entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
- GFP_KERNEL);
- if (!entries) {
- dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "kcalloc "
- "failed @ at %s:%d/%s() !!!\n", ioc->name, __FILE__,
- __LINE__, __func__));
- goto try_ioapic;
- }
-
- for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++)
- a->entry = i;
-
- r = pci_enable_msix_exact(ioc->pdev, entries, ioc->reply_queue_count);
- if (r) {
- dfailprintk(ioc, printk(MPT2SAS_INFO_FMT
- "pci_enable_msix_exact failed (r=%d) !!!\n", ioc->name, r));
- kfree(entries);
- goto try_ioapic;
- }
-
- ioc->msix_enable = 1;
- for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) {
- r = _base_request_irq(ioc, i, a->vector);
- if (r) {
- _base_free_irq(ioc);
- _base_disable_msix(ioc);
- kfree(entries);
- goto try_ioapic;
- }
- }
-
- kfree(entries);
- return 0;
-
-/* failback to io_apic interrupt routing */
- try_ioapic:
-
- ioc->reply_queue_count = 1;
- r = _base_request_irq(ioc, 0, ioc->pdev->irq);
-
- return r;
-}
-
-/**
- * mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
- * @ioc: per adapter object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
-{
- struct pci_dev *pdev = ioc->pdev;
- u32 memap_sz;
- u32 pio_sz;
- int i, r = 0;
- u64 pio_chip = 0;
- u64 chip_phys = 0;
- struct adapter_reply_queue *reply_q;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n",
- ioc->name, __func__));
-
- ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
- if (pci_enable_device_mem(pdev)) {
- printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: "
- "failed\n", ioc->name);
- ioc->bars = 0;
- return -ENODEV;
- }
-
-
- if (pci_request_selected_regions(pdev, ioc->bars,
- MPT2SAS_DRIVER_NAME)) {
- printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: "
- "failed\n", ioc->name);
- ioc->bars = 0;
- r = -ENODEV;
- goto out_fail;
- }
-
- /* AER (Advanced Error Reporting) hooks */
- pci_enable_pcie_error_reporting(pdev);
-
- pci_set_master(pdev);
-
- if (_base_config_dma_addressing(ioc, pdev) != 0) {
- printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n",
- ioc->name, pci_name(pdev));
- r = -ENODEV;
- goto out_fail;
- }
-
- for (i = 0, memap_sz = 0, pio_sz = 0; (i < DEVICE_COUNT_RESOURCE) &&
- (!memap_sz || !pio_sz); i++) {
- if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
- if (pio_sz)
- continue;
- pio_chip = (u64)pci_resource_start(pdev, i);
- pio_sz = pci_resource_len(pdev, i);
- } else {
- if (memap_sz)
- continue;
- /* verify memory resource is valid before using */
- if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
- ioc->chip_phys = pci_resource_start(pdev, i);
- chip_phys = (u64)ioc->chip_phys;
- memap_sz = pci_resource_len(pdev, i);
- ioc->chip = ioremap(ioc->chip_phys, memap_sz);
- }
- }
- }
-
- if (ioc->chip == NULL) {
- printk(MPT2SAS_ERR_FMT "unable to map adapter memory! "
- "or resource not found\n", ioc->name);
- r = -EINVAL;
- goto out_fail;
- }
-
- _base_mask_interrupts(ioc);
-
- r = _base_get_ioc_facts(ioc, CAN_SLEEP);
- if (r)
- goto out_fail;
-
- if (!ioc->rdpq_array_enable_assigned) {
- ioc->rdpq_array_enable = ioc->rdpq_array_capable;
- ioc->rdpq_array_enable_assigned = 1;
- }
-
- r = _base_enable_msix(ioc);
- if (r)
- goto out_fail;
-
- list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
- printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n",
- reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
- "IO-APIC enabled"), reply_q->vector);
-
- printk(MPT2SAS_INFO_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
- ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
- printk(MPT2SAS_INFO_FMT "ioport(0x%016llx), size(%d)\n",
- ioc->name, (unsigned long long)pio_chip, pio_sz);
-
- /* Save PCI configuration state for recovery from PCI AER/EEH errors */
- pci_save_state(pdev);
-
- return 0;
-
- out_fail:
- if (ioc->chip_phys)
- iounmap(ioc->chip);
- ioc->chip_phys = 0;
- pci_release_selected_regions(ioc->pdev, ioc->bars);
- pci_disable_pcie_error_reporting(pdev);
- pci_disable_device(pdev);
- return r;
-}
-
-/**
- * mpt2sas_base_get_msg_frame - obtain request mf pointer
- * @ioc: per adapter object
- * @smid: system request message index(smid zero is invalid)
- *
- * Returns virt pointer to message frame.
- */
-void *
-mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- return (void *)(ioc->request + (smid * ioc->request_sz));
-}
-
-/**
- * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns virt pointer to sense buffer.
- */
-void *
-mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
-}
-
-/**
- * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns phys pointer to the low 32bit address of the sense buffer.
- */
-__le32
-mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- return cpu_to_le32(ioc->sense_dma +
- ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
-}
-
-/**
- * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address
- * @ioc: per adapter object
- * @phys_addr: lower 32 physical addr of the reply
- *
- * Converts 32bit lower physical addr into a virt address.
- */
-void *
-mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr)
-{
- if (!phys_addr)
- return NULL;
- return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
-}
-
-/**
- * mpt2sas_base_get_smid - obtain a free smid from internal queue
- * @ioc: per adapter object
- * @cb_idx: callback index
- *
- * Returns smid (zero is invalid)
- */
-u16
-mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
-{
- unsigned long flags;
- struct request_tracker *request;
- u16 smid;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- if (list_empty(&ioc->internal_free_list)) {
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
- ioc->name, __func__);
- return 0;
- }
-
- request = list_entry(ioc->internal_free_list.next,
- struct request_tracker, tracker_list);
- request->cb_idx = cb_idx;
- smid = request->smid;
- list_del(&request->tracker_list);
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return smid;
-}
-
-/**
- * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
- * @ioc: per adapter object
- * @cb_idx: callback index
- * @scmd: pointer to scsi command object
- *
- * Returns smid (zero is invalid)
- */
-u16
-mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
- struct scsi_cmnd *scmd)
-{
- unsigned long flags;
- struct scsiio_tracker *request;
- u16 smid;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- if (list_empty(&ioc->free_list)) {
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
- ioc->name, __func__);
- return 0;
- }
-
- request = list_entry(ioc->free_list.next,
- struct scsiio_tracker, tracker_list);
- request->scmd = scmd;
- request->cb_idx = cb_idx;
- smid = request->smid;
- list_del(&request->tracker_list);
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return smid;
-}
-
-/**
- * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
- * @ioc: per adapter object
- * @cb_idx: callback index
- *
- * Returns smid (zero is invalid)
- */
-u16
-mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
-{
- unsigned long flags;
- struct request_tracker *request;
- u16 smid;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- if (list_empty(&ioc->hpr_free_list)) {
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return 0;
- }
-
- request = list_entry(ioc->hpr_free_list.next,
- struct request_tracker, tracker_list);
- request->cb_idx = cb_idx;
- smid = request->smid;
- list_del(&request->tracker_list);
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return smid;
-}
-
-
-/**
- * mpt2sas_base_free_smid - put smid back on free_list
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return nothing.
- */
-void
-mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- unsigned long flags;
- int i;
- struct chain_tracker *chain_req, *next;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- if (smid < ioc->hi_priority_smid) {
- /* scsiio queue */
- i = smid - 1;
- if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
- list_for_each_entry_safe(chain_req, next,
- &ioc->scsi_lookup[i].chain_list, tracker_list) {
- list_del_init(&chain_req->tracker_list);
- list_add(&chain_req->tracker_list,
- &ioc->free_chain_list);
- }
- }
- ioc->scsi_lookup[i].cb_idx = 0xFF;
- ioc->scsi_lookup[i].scmd = NULL;
- ioc->scsi_lookup[i].direct_io = 0;
- list_add(&ioc->scsi_lookup[i].tracker_list,
- &ioc->free_list);
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
- /*
- * See _wait_for_commands_to_complete() call with regards
- * to this code.
- */
- if (ioc->shost_recovery && ioc->pending_io_count) {
- if (ioc->pending_io_count == 1)
- wake_up(&ioc->reset_wq);
- ioc->pending_io_count--;
- }
- return;
- } else if (smid < ioc->internal_smid) {
- /* hi-priority */
- i = smid - ioc->hi_priority_smid;
- ioc->hpr_lookup[i].cb_idx = 0xFF;
- list_add(&ioc->hpr_lookup[i].tracker_list,
- &ioc->hpr_free_list);
- } else if (smid <= ioc->hba_queue_depth) {
- /* internal queue */
- i = smid - ioc->internal_smid;
- ioc->internal_lookup[i].cb_idx = 0xFF;
- list_add(&ioc->internal_lookup[i].tracker_list,
- &ioc->internal_free_list);
- }
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-}
-
-/**
- * _base_writeq - 64 bit write to MMIO
- * @ioc: per adapter object
- * @b: data payload
- * @addr: address in MMIO space
- * @writeq_lock: spin lock
- *
- * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
- * care of 32 bit environment where its not quarenteed to send the entire word
- * in one transfer.
- */
-#ifndef writeq
-static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
- spinlock_t *writeq_lock)
-{
- unsigned long flags;
- __u64 data_out = cpu_to_le64(b);
-
- spin_lock_irqsave(writeq_lock, flags);
- writel((u32)(data_out), addr);
- writel((u32)(data_out >> 32), (addr + 4));
- spin_unlock_irqrestore(writeq_lock, flags);
-}
-#else
-static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
- spinlock_t *writeq_lock)
-{
- writeq(cpu_to_le64(b), addr);
-}
-#endif
-
-static inline u8
-_base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
-{
- return ioc->cpu_msix_table[raw_smp_processor_id()];
-}
-
-/**
- * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
- * @ioc: per adapter object
- * @smid: system request message index
- * @handle: device handle
- *
- * Return nothing.
- */
-void
-mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
-{
- Mpi2RequestDescriptorUnion_t descriptor;
- u64 *request = (u64 *)&descriptor;
-
-
- descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
- descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
- descriptor.SCSIIO.SMID = cpu_to_le16(smid);
- descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
- descriptor.SCSIIO.LMID = 0;
- _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
- &ioc->scsi_lookup_lock);
-}
-
-
-/**
- * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return nothing.
- */
-void
-mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- Mpi2RequestDescriptorUnion_t descriptor;
- u64 *request = (u64 *)&descriptor;
-
- descriptor.HighPriority.RequestFlags =
- MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
- descriptor.HighPriority.MSIxIndex = 0;
- descriptor.HighPriority.SMID = cpu_to_le16(smid);
- descriptor.HighPriority.LMID = 0;
- descriptor.HighPriority.Reserved1 = 0;
- _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
- &ioc->scsi_lookup_lock);
-}
-
-/**
- * mpt2sas_base_put_smid_default - Default, primarily used for config pages
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return nothing.
- */
-void
-mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- Mpi2RequestDescriptorUnion_t descriptor;
- u64 *request = (u64 *)&descriptor;
-
- descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
- descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
- descriptor.Default.SMID = cpu_to_le16(smid);
- descriptor.Default.LMID = 0;
- descriptor.Default.DescriptorTypeDependent = 0;
- _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
- &ioc->scsi_lookup_lock);
-}
-
-/**
- * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
- * @ioc: per adapter object
- * @smid: system request message index
- * @io_index: value used to track the IO
- *
- * Return nothing.
- */
-void
-mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u16 io_index)
-{
- Mpi2RequestDescriptorUnion_t descriptor;
- u64 *request = (u64 *)&descriptor;
-
- descriptor.SCSITarget.RequestFlags =
- MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET;
- descriptor.SCSITarget.MSIxIndex = _base_get_msix_index(ioc);
- descriptor.SCSITarget.SMID = cpu_to_le16(smid);
- descriptor.SCSITarget.LMID = 0;
- descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index);
- _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
- &ioc->scsi_lookup_lock);
-}
-
-/**
- * _base_display_dell_branding - Disply branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
-{
- char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
-
- if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
- return;
-
- memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
- switch (ioc->pdev->subsystem_device) {
- case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
- strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
- MPT2SAS_DELL_BRANDING_SIZE - 1);
- break;
- case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
- strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
- MPT2SAS_DELL_BRANDING_SIZE - 1);
- break;
- case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
- strncpy(dell_branding,
- MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
- MPT2SAS_DELL_BRANDING_SIZE - 1);
- break;
- case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
- strncpy(dell_branding,
- MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
- MPT2SAS_DELL_BRANDING_SIZE - 1);
- break;
- case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
- strncpy(dell_branding,
- MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
- MPT2SAS_DELL_BRANDING_SIZE - 1);
- break;
- case MPT2SAS_DELL_PERC_H200_SSDID:
- strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
- MPT2SAS_DELL_BRANDING_SIZE - 1);
- break;
- case MPT2SAS_DELL_6GBPS_SAS_SSDID:
- strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
- MPT2SAS_DELL_BRANDING_SIZE - 1);
- break;
- default:
- sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
- break;
- }
-
- printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
- " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
- ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
- ioc->pdev->subsystem_device);
-}
-
-/**
- * _base_display_intel_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
-{
- if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
- return;
-
- switch (ioc->pdev->device) {
- case MPI2_MFGPAGE_DEVID_SAS2008:
- switch (ioc->pdev->subsystem_device) {
- case MPT2SAS_INTEL_RMS2LL080_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RMS2LL080_BRANDING);
- break;
- case MPT2SAS_INTEL_RMS2LL040_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RMS2LL040_BRANDING);
- break;
- case MPT2SAS_INTEL_SSD910_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_SSD910_BRANDING);
- break;
- default:
- break;
- }
- case MPI2_MFGPAGE_DEVID_SAS2308_2:
- switch (ioc->pdev->subsystem_device) {
- case MPT2SAS_INTEL_RS25GB008_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RS25GB008_BRANDING);
- break;
- case MPT2SAS_INTEL_RMS25JB080_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RMS25JB080_BRANDING);
- break;
- case MPT2SAS_INTEL_RMS25JB040_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RMS25JB040_BRANDING);
- break;
- case MPT2SAS_INTEL_RMS25KB080_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RMS25KB080_BRANDING);
- break;
- case MPT2SAS_INTEL_RMS25KB040_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RMS25KB040_BRANDING);
- break;
- case MPT2SAS_INTEL_RMS25LB040_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RMS25LB040_BRANDING);
- break;
- case MPT2SAS_INTEL_RMS25LB080_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_INTEL_RMS25LB080_BRANDING);
- break;
- default:
- break;
- }
- default:
- break;
- }
-}
-
-/**
- * _base_display_hp_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_hp_branding(struct MPT2SAS_ADAPTER *ioc)
-{
- if (ioc->pdev->subsystem_vendor != MPT2SAS_HP_3PAR_SSVID)
- return;
-
- switch (ioc->pdev->device) {
- case MPI2_MFGPAGE_DEVID_SAS2004:
- switch (ioc->pdev->subsystem_device) {
- case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING);
- break;
- default:
- break;
- }
- case MPI2_MFGPAGE_DEVID_SAS2308_2:
- switch (ioc->pdev->subsystem_device) {
- case MPT2SAS_HP_2_4_INTERNAL_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_HP_2_4_INTERNAL_BRANDING);
- break;
- case MPT2SAS_HP_2_4_EXTERNAL_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_HP_2_4_EXTERNAL_BRANDING);
- break;
- case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING);
- break;
- case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID:
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING);
- break;
- default:
- break;
- }
- default:
- break;
- }
-}
-
-/**
- * _base_display_ioc_capabilities - Disply IOC's capabilities.
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
-{
- int i = 0;
- char desc[16];
- u32 iounit_pg1_flags;
- u32 bios_version;
-
- bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
- strncpy(desc, ioc->manu_pg0.ChipName, 16);
- printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "
- "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
- ioc->name, desc,
- (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
- (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
- (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
- ioc->facts.FWVersion.Word & 0x000000FF,
- ioc->pdev->revision,
- (bios_version & 0xFF000000) >> 24,
- (bios_version & 0x00FF0000) >> 16,
- (bios_version & 0x0000FF00) >> 8,
- bios_version & 0x000000FF);
-
- _base_display_dell_branding(ioc);
- _base_display_intel_branding(ioc);
- _base_display_hp_branding(ioc);
-
- printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name);
-
- if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
- printk("Initiator");
- i++;
- }
-
- if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
- printk("%sTarget", i ? "," : "");
- i++;
- }
-
- i = 0;
- printk("), ");
- printk("Capabilities=(");
-
- if (!ioc->hide_ir_msg) {
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
- printk("Raid");
- i++;
- }
- }
-
- if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
- printk("%sTLR", i ? "," : "");
- i++;
- }
-
- if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
- printk("%sMulticast", i ? "," : "");
- i++;
- }
-
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
- printk("%sBIDI Target", i ? "," : "");
- i++;
- }
-
- if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
- printk("%sEEDP", i ? "," : "");
- i++;
- }
-
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
- printk("%sSnapshot Buffer", i ? "," : "");
- i++;
- }
-
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
- printk("%sDiag Trace Buffer", i ? "," : "");
- i++;
- }
-
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
- printk(KERN_INFO "%sDiag Extended Buffer", i ? "," : "");
- i++;
- }
-
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
- printk("%sTask Set Full", i ? "," : "");
- i++;
- }
-
- iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
- if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
- printk("%sNCQ", i ? "," : "");
- i++;
- }
-
- printk(")\n");
-}
-
-/**
- * mpt2sas_base_update_missing_delay - change the missing delay timers
- * @ioc: per adapter object
- * @device_missing_delay: amount of time till device is reported missing
- * @io_missing_delay: interval IO is returned when there is a missing device
- *
- * Return nothing.
- *
- * Passed on the command line, this function will modify the device missing
- * delay, as well as the io missing delay. This should be called at driver
- * load time.
- */
-void
-mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
- u16 device_missing_delay, u8 io_missing_delay)
-{
- u16 dmd, dmd_new, dmd_orignal;
- u8 io_missing_delay_original;
- u16 sz;
- Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
- Mpi2ConfigReply_t mpi_reply;
- u8 num_phys = 0;
- u16 ioc_status;
-
- mpt2sas_config_get_number_hba_phys(ioc, &num_phys);
- if (!num_phys)
- return;
-
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
- sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
- if (!sas_iounit_pg1) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
- if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
- sas_iounit_pg1, sz))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
-
- /* device missing delay */
- dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
- if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
- dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
- else
- dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
- dmd_orignal = dmd;
- if (device_missing_delay > 0x7F) {
- dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
- device_missing_delay;
- dmd = dmd / 16;
- dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
- } else
- dmd = device_missing_delay;
- sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
-
- /* io missing delay */
- io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
- sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
-
- if (!mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
- sz)) {
- if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
- dmd_new = (dmd &
- MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
- else
- dmd_new =
- dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
- printk(MPT2SAS_INFO_FMT "device_missing_delay: old(%d), "
- "new(%d)\n", ioc->name, dmd_orignal, dmd_new);
- printk(MPT2SAS_INFO_FMT "ioc_missing_delay: old(%d), "
- "new(%d)\n", ioc->name, io_missing_delay_original,
- io_missing_delay);
- ioc->device_missing_delay = dmd_new;
- ioc->io_missing_delay = io_missing_delay;
- }
-
-out:
- kfree(sas_iounit_pg1);
-}
-
-/**
- * _base_static_config_pages - static start of day config pages
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2ConfigReply_t mpi_reply;
- u32 iounit_pg1_flags;
-
- mpt2sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
- if (ioc->ir_firmware)
- mpt2sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
- &ioc->manu_pg10);
- mpt2sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
- mpt2sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
- mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
- mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
- mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
- mpt2sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
- _base_display_ioc_capabilities(ioc);
-
- /*
- * Enable task_set_full handling in iounit_pg1 when the
- * facts capabilities indicate that its supported.
- */
- iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
- if ((ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
- iounit_pg1_flags &=
- ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
- else
- iounit_pg1_flags |=
- MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
- ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
- mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
-
- if (ioc->iounit_pg8.NumSensors)
- ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
-}
-
-/**
- * _base_release_memory_pools - release memory
- * @ioc: per adapter object
- *
- * Free memory allocated from _base_allocate_memory_pools.
- *
- * Return nothing.
- */
-static void
-_base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
-{
- int i = 0;
- struct reply_post_struct *rps;
-
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- if (ioc->request) {
- pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
- ioc->request, ioc->request_dma);
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)"
- ": free\n", ioc->name, ioc->request));
- ioc->request = NULL;
- }
-
- if (ioc->sense) {
- pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
- if (ioc->sense_dma_pool)
- pci_pool_destroy(ioc->sense_dma_pool);
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)"
- ": free\n", ioc->name, ioc->sense));
- ioc->sense = NULL;
- }
-
- if (ioc->reply) {
- pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
- if (ioc->reply_dma_pool)
- pci_pool_destroy(ioc->reply_dma_pool);
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)"
- ": free\n", ioc->name, ioc->reply));
- ioc->reply = NULL;
- }
-
- if (ioc->reply_free) {
- pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
- ioc->reply_free_dma);
- if (ioc->reply_free_dma_pool)
- pci_pool_destroy(ioc->reply_free_dma_pool);
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool"
- "(0x%p): free\n", ioc->name, ioc->reply_free));
- ioc->reply_free = NULL;
- }
-
- if (ioc->reply_post) {
- do {
- rps = &ioc->reply_post[i];
- if (rps->reply_post_free) {
- pci_pool_free(
- ioc->reply_post_free_dma_pool,
- rps->reply_post_free,
- rps->reply_post_free_dma);
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "reply_post_free_pool(0x%p): free\n",
- ioc->name, rps->reply_post_free));
- rps->reply_post_free = NULL;
- }
- } while (ioc->rdpq_array_enable &&
- (++i < ioc->reply_queue_count));
-
- if (ioc->reply_post_free_dma_pool)
- pci_pool_destroy(ioc->reply_post_free_dma_pool);
- kfree(ioc->reply_post);
- }
-
- if (ioc->config_page) {
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "config_page(0x%p): free\n", ioc->name,
- ioc->config_page));
- pci_free_consistent(ioc->pdev, ioc->config_page_sz,
- ioc->config_page, ioc->config_page_dma);
- }
-
- if (ioc->scsi_lookup) {
- free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages);
- ioc->scsi_lookup = NULL;
- }
- kfree(ioc->hpr_lookup);
- kfree(ioc->internal_lookup);
- if (ioc->chain_lookup) {
- for (i = 0; i < ioc->chain_depth; i++) {
- if (ioc->chain_lookup[i].chain_buffer)
- pci_pool_free(ioc->chain_dma_pool,
- ioc->chain_lookup[i].chain_buffer,
- ioc->chain_lookup[i].chain_buffer_dma);
- }
- if (ioc->chain_dma_pool)
- pci_pool_destroy(ioc->chain_dma_pool);
- free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
- ioc->chain_lookup = NULL;
- }
-}
-
-
-/**
- * _base_allocate_memory_pools - allocate start of day memory pools
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 success, anything else error
- */
-static int
-_base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- struct mpt2sas_facts *facts;
- u16 max_sge_elements;
- u16 chains_needed_per_io;
- u32 sz, total_sz, reply_post_free_sz;
- u32 retry_sz;
- u16 max_request_credit;
- int i;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- retry_sz = 0;
- facts = &ioc->facts;
-
- /* command line tunables for max sgl entries */
- if (max_sgl_entries != -1) {
- ioc->shost->sg_tablesize = min_t(unsigned short,
- max_sgl_entries, SCSI_MAX_SG_CHAIN_SEGMENTS);
- if (ioc->shost->sg_tablesize > MPT2SAS_SG_DEPTH)
- printk(MPT2SAS_WARN_FMT
- "sg_tablesize(%u) is bigger than kernel defined"
- " SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
- ioc->shost->sg_tablesize, MPT2SAS_SG_DEPTH);
- } else {
- ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH;
- }
-
- /* command line tunables for max controller queue depth */
- if (max_queue_depth != -1 && max_queue_depth != 0) {
- max_request_credit = min_t(u16, max_queue_depth +
- ioc->hi_priority_depth + ioc->internal_depth,
- facts->RequestCredit);
- if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
- max_request_credit = MAX_HBA_QUEUE_DEPTH;
- } else
- max_request_credit = min_t(u16, facts->RequestCredit,
- MAX_HBA_QUEUE_DEPTH);
-
- ioc->hba_queue_depth = max_request_credit;
- ioc->hi_priority_depth = facts->HighPriorityCredit;
- ioc->internal_depth = ioc->hi_priority_depth + 5;
-
- /* request frame size */
- ioc->request_sz = facts->IOCRequestFrameSize * 4;
-
- /* reply frame size */
- ioc->reply_sz = facts->ReplyFrameSize * 4;
-
- retry_allocation:
- total_sz = 0;
- /* calculate number of sg elements left over in the 1st frame */
- max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
- sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size);
- ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size;
-
- /* now do the same for a chain buffer */
- max_sge_elements = ioc->request_sz - ioc->sge_size;
- ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size;
-
- ioc->chain_offset_value_for_main_message =
- ((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) +
- (ioc->max_sges_in_chain_message * ioc->sge_size)) / 4;
-
- /*
- * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
- */
- chains_needed_per_io = ((ioc->shost->sg_tablesize -
- ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
- + 1;
- if (chains_needed_per_io > facts->MaxChainDepth) {
- chains_needed_per_io = facts->MaxChainDepth;
- ioc->shost->sg_tablesize = min_t(u16,
- ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
- * chains_needed_per_io), ioc->shost->sg_tablesize);
- }
- ioc->chains_needed_per_io = chains_needed_per_io;
-
- /* reply free queue sizing - taking into account for 64 FW events */
- ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
-
- /* calculate reply descriptor post queue depth */
- ioc->reply_post_queue_depth = ioc->hba_queue_depth +
- ioc->reply_free_queue_depth + 1;
- /* align the reply post queue on the next 16 count boundary */
- if (ioc->reply_post_queue_depth % 16)
- ioc->reply_post_queue_depth += 16 -
- (ioc->reply_post_queue_depth % 16);
-
-
- if (ioc->reply_post_queue_depth >
- facts->MaxReplyDescriptorPostQueueDepth) {
- ioc->reply_post_queue_depth =
- facts->MaxReplyDescriptorPostQueueDepth -
- (facts->MaxReplyDescriptorPostQueueDepth % 16);
- ioc->hba_queue_depth =
- ((ioc->reply_post_queue_depth - 64) / 2) - 1;
- ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
- }
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: "
- "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
- "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
- ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
- ioc->chains_needed_per_io));
-
- /* reply post queue, 16 byte align */
- reply_post_free_sz = ioc->reply_post_queue_depth *
- sizeof(Mpi2DefaultReplyDescriptor_t);
-
- sz = reply_post_free_sz;
- if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
- sz *= ioc->reply_queue_count;
-
- ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
- (ioc->reply_queue_count):1,
- sizeof(struct reply_post_struct), GFP_KERNEL);
-
- if (!ioc->reply_post) {
- printk(MPT2SAS_ERR_FMT "reply_post_free pool: kcalloc failed\n",
- ioc->name);
- goto out;
- }
- ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
- ioc->pdev, sz, 16, 0);
- if (!ioc->reply_post_free_dma_pool) {
- printk(MPT2SAS_ERR_FMT
- "reply_post_free pool: pci_pool_create failed\n",
- ioc->name);
- goto out;
- }
- i = 0;
- do {
- ioc->reply_post[i].reply_post_free =
- pci_pool_alloc(ioc->reply_post_free_dma_pool,
- GFP_KERNEL,
- &ioc->reply_post[i].reply_post_free_dma);
- if (!ioc->reply_post[i].reply_post_free) {
- printk(MPT2SAS_ERR_FMT
- "reply_post_free pool: pci_pool_alloc failed\n",
- ioc->name);
- goto out;
- }
- memset(ioc->reply_post[i].reply_post_free, 0, sz);
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "reply post free pool (0x%p): depth(%d),"
- "element_size(%d), pool_size(%d kB)\n", ioc->name,
- ioc->reply_post[i].reply_post_free,
- ioc->reply_post_queue_depth, 8, sz/1024));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "reply_post_free_dma = (0x%llx)\n", ioc->name,
- (unsigned long long)
- ioc->reply_post[i].reply_post_free_dma));
- total_sz += sz;
- } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
-
- if (ioc->dma_mask == 64) {
- if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
- printk(MPT2SAS_WARN_FMT
- "no suitable consistent DMA mask for %s\n",
- ioc->name, pci_name(ioc->pdev));
- goto out;
- }
- }
-
- ioc->scsiio_depth = ioc->hba_queue_depth -
- ioc->hi_priority_depth - ioc->internal_depth;
-
- /* set the scsi host can_queue depth
- * with some internal commands that could be outstanding
- */
- ioc->shost->can_queue = ioc->scsiio_depth;
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
- "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
-
- /* contiguous pool for request and chains, 16 byte align, one extra "
- * "frame for smid=0
- */
- ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
- sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
-
- /* hi-priority queue */
- sz += (ioc->hi_priority_depth * ioc->request_sz);
-
- /* internal queue */
- sz += (ioc->internal_depth * ioc->request_sz);
-
- ioc->request_dma_sz = sz;
- ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
- if (!ioc->request) {
- printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
- "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
- "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
- ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
- if (ioc->scsiio_depth < MPT2SAS_SAS_QUEUE_DEPTH)
- goto out;
- retry_sz += 64;
- ioc->hba_queue_depth = max_request_credit - retry_sz;
- goto retry_allocation;
- }
-
- if (retry_sz)
- printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
- "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
- "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
- ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
-
-
- /* hi-priority queue */
- ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
- ioc->request_sz);
- ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
- ioc->request_sz);
-
- /* internal queue */
- ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
- ioc->request_sz);
- ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
- ioc->request_sz);
-
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): "
- "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
- ioc->request, ioc->hba_queue_depth, ioc->request_sz,
- (ioc->hba_queue_depth * ioc->request_sz)/1024));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n",
- ioc->name, (unsigned long long) ioc->request_dma));
- total_sz += sz;
-
- sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker);
- ioc->scsi_lookup_pages = get_order(sz);
- ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages(
- GFP_KERNEL, ioc->scsi_lookup_pages);
- if (!ioc->scsi_lookup) {
- printk(MPT2SAS_ERR_FMT "scsi_lookup: get_free_pages failed, "
- "sz(%d)\n", ioc->name, (int)sz);
- goto out;
- }
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsiio(0x%p): "
- "depth(%d)\n", ioc->name, ioc->request,
- ioc->scsiio_depth));
-
- ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
- sz = ioc->chain_depth * sizeof(struct chain_tracker);
- ioc->chain_pages = get_order(sz);
-
- ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
- GFP_KERNEL, ioc->chain_pages);
- if (!ioc->chain_lookup) {
- printk(MPT2SAS_ERR_FMT "chain_lookup: get_free_pages failed, "
- "sz(%d)\n", ioc->name, (int)sz);
- goto out;
- }
- ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
- ioc->request_sz, 16, 0);
- if (!ioc->chain_dma_pool) {
- printk(MPT2SAS_ERR_FMT "chain_dma_pool: pci_pool_create "
- "failed\n", ioc->name);
- goto out;
- }
- for (i = 0; i < ioc->chain_depth; i++) {
- ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
- ioc->chain_dma_pool , GFP_KERNEL,
- &ioc->chain_lookup[i].chain_buffer_dma);
- if (!ioc->chain_lookup[i].chain_buffer) {
- ioc->chain_depth = i;
- goto chain_done;
- }
- total_sz += ioc->request_sz;
- }
-chain_done:
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool depth"
- "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
- ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
- ioc->request_sz))/1024));
-
- /* initialize hi-priority queue smid's */
- ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
- sizeof(struct request_tracker), GFP_KERNEL);
- if (!ioc->hpr_lookup) {
- printk(MPT2SAS_ERR_FMT "hpr_lookup: kcalloc failed\n",
- ioc->name);
- goto out;
- }
- ioc->hi_priority_smid = ioc->scsiio_depth + 1;
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hi_priority(0x%p): "
- "depth(%d), start smid(%d)\n", ioc->name, ioc->hi_priority,
- ioc->hi_priority_depth, ioc->hi_priority_smid));
-
- /* initialize internal queue smid's */
- ioc->internal_lookup = kcalloc(ioc->internal_depth,
- sizeof(struct request_tracker), GFP_KERNEL);
- if (!ioc->internal_lookup) {
- printk(MPT2SAS_ERR_FMT "internal_lookup: kcalloc failed\n",
- ioc->name);
- goto out;
- }
- ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "internal(0x%p): "
- "depth(%d), start smid(%d)\n", ioc->name, ioc->internal,
- ioc->internal_depth, ioc->internal_smid));
-
- /* sense buffers, 4 byte align */
- sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
- ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
- 0);
- if (!ioc->sense_dma_pool) {
- printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n",
- ioc->name);
- goto out;
- }
- ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
- &ioc->sense_dma);
- if (!ioc->sense) {
- printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n",
- ioc->name);
- goto out;
- }
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
- "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
- SCSI_SENSE_BUFFERSIZE, sz/1024));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n",
- ioc->name, (unsigned long long)ioc->sense_dma));
- total_sz += sz;
-
- /* reply pool, 4 byte align */
- sz = ioc->reply_free_queue_depth * ioc->reply_sz;
- ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
- 0);
- if (!ioc->reply_dma_pool) {
- printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n",
- ioc->name);
- goto out;
- }
- ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
- &ioc->reply_dma);
- if (!ioc->reply) {
- printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n",
- ioc->name);
- goto out;
- }
- ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
- ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth"
- "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply,
- ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n",
- ioc->name, (unsigned long long)ioc->reply_dma));
- total_sz += sz;
-
- /* reply free queue, 16 byte align */
- sz = ioc->reply_free_queue_depth * 4;
- ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
- ioc->pdev, sz, 16, 0);
- if (!ioc->reply_free_dma_pool) {
- printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create "
- "failed\n", ioc->name);
- goto out;
- }
- ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
- &ioc->reply_free_dma);
- if (!ioc->reply_free) {
- printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc "
- "failed\n", ioc->name);
- goto out;
- }
- memset(ioc->reply_free, 0, sz);
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): "
- "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
- ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma"
- "(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma));
- total_sz += sz;
-
- ioc->config_page_sz = 512;
- ioc->config_page = pci_alloc_consistent(ioc->pdev,
- ioc->config_page_sz, &ioc->config_page_dma);
- if (!ioc->config_page) {
- printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc "
- "failed\n", ioc->name);
- goto out;
- }
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size"
- "(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma"
- "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma));
- total_sz += ioc->config_page_sz;
-
- printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n",
- ioc->name, total_sz/1024);
- printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), "
- "Max Controller Queue Depth(%d)\n",
- ioc->name, ioc->shost->can_queue, facts->RequestCredit);
- printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n",
- ioc->name, ioc->shost->sg_tablesize);
- return 0;
-
- out:
- return -ENOMEM;
-}
-
-
-/**
- * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
- * @ioc: Pointer to MPT_ADAPTER structure
- * @cooked: Request raw or cooked IOC state
- *
- * Returns all IOC Doorbell register bits if cooked==0, else just the
- * Doorbell bits in MPI_IOC_STATE_MASK.
- */
-u32
-mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked)
-{
- u32 s, sc;
-
- s = readl(&ioc->chip->Doorbell);
- sc = s & MPI2_IOC_STATE_MASK;
- return cooked ? sc : s;
-}
-
-/**
- * _base_wait_on_iocstate - waiting on a particular ioc state
- * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
- int sleep_flag)
-{
- u32 count, cntdn;
- u32 current_state;
-
- count = 0;
- cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
- do {
- current_state = mpt2sas_base_get_iocstate(ioc, 1);
- if (current_state == ioc_state)
- return 0;
- if (count && current_state == MPI2_IOC_STATE_FAULT)
- break;
- if (sleep_flag == CAN_SLEEP)
- msleep(1);
- else
- udelay(500);
- count++;
- } while (--cntdn);
-
- return current_state;
-}
-
-/**
- * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
- * a write to the doorbell)
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
- */
-static int
-_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
- int sleep_flag)
-{
- u32 cntdn, count;
- u32 int_status;
-
- count = 0;
- cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
- do {
- int_status = readl(&ioc->chip->HostInterruptStatus);
- if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "successful count(%d), timeout(%d)\n", ioc->name,
- __func__, count, timeout));
- return 0;
- }
- if (sleep_flag == CAN_SLEEP)
- msleep(1);
- else
- udelay(500);
- count++;
- } while (--cntdn);
-
- printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
- "int_status(%x)!\n", ioc->name, __func__, count, int_status);
- return -EFAULT;
-}
-
-/**
- * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
- * doorbell.
- */
-static int
-_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
- int sleep_flag)
-{
- u32 cntdn, count;
- u32 int_status;
- u32 doorbell;
-
- count = 0;
- cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
- do {
- int_status = readl(&ioc->chip->HostInterruptStatus);
- if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "successful count(%d), timeout(%d)\n", ioc->name,
- __func__, count, timeout));
- return 0;
- } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
- doorbell = readl(&ioc->chip->Doorbell);
- if ((doorbell & MPI2_IOC_STATE_MASK) ==
- MPI2_IOC_STATE_FAULT) {
- mpt2sas_base_fault_info(ioc , doorbell);
- return -EFAULT;
- }
- } else if (int_status == 0xFFFFFFFF)
- goto out;
-
- if (sleep_flag == CAN_SLEEP)
- msleep(1);
- else
- udelay(500);
- count++;
- } while (--cntdn);
-
- out:
- printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
- "int_status(%x)!\n", ioc->name, __func__, count, int_status);
- return -EFAULT;
-}
-
-/**
- * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
- int sleep_flag)
-{
- u32 cntdn, count;
- u32 doorbell_reg;
-
- count = 0;
- cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
- do {
- doorbell_reg = readl(&ioc->chip->Doorbell);
- if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "successful count(%d), timeout(%d)\n", ioc->name,
- __func__, count, timeout));
- return 0;
- }
- if (sleep_flag == CAN_SLEEP)
- msleep(1);
- else
- udelay(500);
- count++;
- } while (--cntdn);
-
- printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
- "doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg);
- return -EFAULT;
-}
-
-/**
- * _base_send_ioc_reset - send doorbell reset
- * @ioc: per adapter object
- * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout,
- int sleep_flag)
-{
- u32 ioc_state;
- int r = 0;
-
- if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
- printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n",
- ioc->name, __func__);
- return -EFAULT;
- }
-
- if (!(ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
- return -EFAULT;
-
- printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name);
-
- writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
- &ioc->chip->Doorbell);
- if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
- r = -EFAULT;
- goto out;
- }
- ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
- timeout, sleep_flag);
- if (ioc_state) {
- printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
- " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
- r = -EFAULT;
- goto out;
- }
- out:
- printk(MPT2SAS_INFO_FMT "message unit reset: %s\n",
- ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
- return r;
-}
-
-/**
- * _base_handshake_req_reply_wait - send request thru doorbell interface
- * @ioc: per adapter object
- * @request_bytes: request length
- * @request: pointer having request payload
- * @reply_bytes: reply length
- * @reply: pointer to reply payload
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
- u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
-{
- MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
- int i;
- u8 failed;
- u16 dummy;
- __le32 *mfp;
-
- /* make sure doorbell is not in use */
- if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
- printk(MPT2SAS_ERR_FMT "doorbell is in use "
- " (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
-
- /* clear pending doorbell interrupts from previous state changes */
- if (readl(&ioc->chip->HostInterruptStatus) &
- MPI2_HIS_IOC2SYS_DB_STATUS)
- writel(0, &ioc->chip->HostInterruptStatus);
-
- /* send message to ioc */
- writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
- ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
- &ioc->chip->Doorbell);
-
- if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "int failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
- writel(0, &ioc->chip->HostInterruptStatus);
-
- if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "ack failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
-
- /* send message 32-bits at a time */
- for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
- writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
- if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
- failed = 1;
- }
-
- if (failed) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "sending request failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
-
- /* now wait for the reply */
- if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "int failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
-
- /* read the first two 16-bits, it gives the total length of the reply */
- reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
- & MPI2_DOORBELL_DATA_MASK);
- writel(0, &ioc->chip->HostInterruptStatus);
- if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "int failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
- reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
- & MPI2_DOORBELL_DATA_MASK);
- writel(0, &ioc->chip->HostInterruptStatus);
-
- for (i = 2; i < default_reply->MsgLength * 2; i++) {
- if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
- printk(MPT2SAS_ERR_FMT "doorbell "
- "handshake int failed (line=%d)\n", ioc->name,
- __LINE__);
- return -EFAULT;
- }
- if (i >= reply_bytes/2) /* overflow case */
- dummy = readl(&ioc->chip->Doorbell);
- else
- reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
- & MPI2_DOORBELL_DATA_MASK);
- writel(0, &ioc->chip->HostInterruptStatus);
- }
-
- _base_wait_for_doorbell_int(ioc, 5, sleep_flag);
- if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use "
- " (line=%d)\n", ioc->name, __LINE__));
- }
- writel(0, &ioc->chip->HostInterruptStatus);
-
- if (ioc->logging_level & MPT_DEBUG_INIT) {
- mfp = (__le32 *)reply;
- printk(KERN_INFO "\toffset:data\n");
- for (i = 0; i < reply_bytes/4; i++)
- printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
- le32_to_cpu(mfp[i]));
- }
- return 0;
-}
-
-/**
- * mpt2sas_base_sas_iounit_control - send sas iounit control to FW
- * @ioc: per adapter object
- * @mpi_reply: the reply payload from FW
- * @mpi_request: the request payload sent to FW
- *
- * The SAS IO Unit Control Request message allows the host to perform low-level
- * operations, such as resets on the PHYs of the IO Unit, also allows the host
- * to obtain the IOC assigned device handles for a device if it has other
- * identifying information about the device, in addition allows the host to
- * remove IOC resources associated with the device.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
- Mpi2SasIoUnitControlReply_t *mpi_reply,
- Mpi2SasIoUnitControlRequest_t *mpi_request)
-{
- u16 smid;
- u32 ioc_state;
- unsigned long timeleft;
- bool issue_reset = false;
- int rc;
- void *request;
- u16 wait_state_count;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- mutex_lock(&ioc->base_cmds.mutex);
-
- if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- wait_state_count = 0;
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- if (wait_state_count++ == 10) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed due to ioc not operational\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto out;
- }
- ssleep(1);
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- printk(MPT2SAS_INFO_FMT "%s: waiting for "
- "operational state(count=%d)\n", ioc->name,
- __func__, wait_state_count);
- }
-
- smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- rc = 0;
- ioc->base_cmds.status = MPT2_CMD_PENDING;
- request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->base_cmds.smid = smid;
- memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
- if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
- mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
- ioc->ioc_link_reset_in_progress = 1;
- init_completion(&ioc->base_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
- msecs_to_jiffies(10000));
- if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
- mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
- ioc->ioc_link_reset_in_progress)
- ioc->ioc_link_reset_in_progress = 0;
- if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2SasIoUnitControlRequest_t)/4);
- if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
- issue_reset = true;
- goto issue_host_reset;
- }
- if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
- memcpy(mpi_reply, ioc->base_cmds.reply,
- sizeof(Mpi2SasIoUnitControlReply_t));
- else
- memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- goto out;
-
- issue_host_reset:
- if (issue_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- rc = -EFAULT;
- out:
- mutex_unlock(&ioc->base_cmds.mutex);
- return rc;
-}
-
-
-/**
- * mpt2sas_base_scsi_enclosure_processor - sending request to sep device
- * @ioc: per adapter object
- * @mpi_reply: the reply payload from FW
- * @mpi_request: the request payload sent to FW
- *
- * The SCSI Enclosure Processor request message causes the IOC to
- * communicate with SES devices to control LED status signals.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
- Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
-{
- u16 smid;
- u32 ioc_state;
- unsigned long timeleft;
- bool issue_reset = false;
- int rc;
- void *request;
- u16 wait_state_count;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- mutex_lock(&ioc->base_cmds.mutex);
-
- if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- wait_state_count = 0;
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- if (wait_state_count++ == 10) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed due to ioc not operational\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto out;
- }
- ssleep(1);
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- printk(MPT2SAS_INFO_FMT "%s: waiting for "
- "operational state(count=%d)\n", ioc->name,
- __func__, wait_state_count);
- }
-
- smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- rc = 0;
- ioc->base_cmds.status = MPT2_CMD_PENDING;
- request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->base_cmds.smid = smid;
- memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
- init_completion(&ioc->base_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
- msecs_to_jiffies(10000));
- if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2SepRequest_t)/4);
- if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
- issue_reset = true;
- goto issue_host_reset;
- }
- if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
- memcpy(mpi_reply, ioc->base_cmds.reply,
- sizeof(Mpi2SepReply_t));
- else
- memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- goto out;
-
- issue_host_reset:
- if (issue_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- rc = -EFAULT;
- out:
- mutex_unlock(&ioc->base_cmds.mutex);
- return rc;
-}
-
-/**
- * _base_get_port_facts - obtain port facts reply and save in ioc
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
-{
- Mpi2PortFactsRequest_t mpi_request;
- Mpi2PortFactsReply_t mpi_reply;
- struct mpt2sas_port_facts *pfacts;
- int mpi_reply_sz, mpi_request_sz, r;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
- mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
- memset(&mpi_request, 0, mpi_request_sz);
- mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
- mpi_request.PortNumber = port;
- r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
- (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
-
- if (r != 0) {
- printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
- ioc->name, __func__, r);
- return r;
- }
-
- pfacts = &ioc->pfacts[port];
- memset(pfacts, 0, sizeof(struct mpt2sas_port_facts));
- pfacts->PortNumber = mpi_reply.PortNumber;
- pfacts->VP_ID = mpi_reply.VP_ID;
- pfacts->VF_ID = mpi_reply.VF_ID;
- pfacts->MaxPostedCmdBuffers =
- le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
-
- return 0;
-}
-
-/**
- * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
- * @ioc: per adapter object
- * @timeout:
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_wait_for_iocstate(struct MPT2SAS_ADAPTER *ioc, int timeout,
- int sleep_flag)
-{
- u32 ioc_state, doorbell;
- int rc;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- if (ioc->pci_error_recovery)
- return 0;
-
- doorbell = mpt2sas_base_get_iocstate(ioc, 0);
- ioc_state = doorbell & MPI2_IOC_STATE_MASK;
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n",
- ioc->name, __func__, ioc_state));
-
- switch (ioc_state) {
- case MPI2_IOC_STATE_READY:
- case MPI2_IOC_STATE_OPERATIONAL:
- return 0;
- }
-
- if (doorbell & MPI2_DOORBELL_USED) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT
- "unexpected doorbell activ!e\n", ioc->name));
- goto issue_diag_reset;
- }
-
- if (ioc_state == MPI2_IOC_STATE_FAULT) {
- mpt2sas_base_fault_info(ioc, doorbell &
- MPI2_DOORBELL_DATA_MASK);
- goto issue_diag_reset;
- }
-
- ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
- timeout, sleep_flag);
- if (ioc_state) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed going to ready state (ioc_state=0x%x)\n",
- ioc->name, __func__, ioc_state);
- return -EFAULT;
- }
-
- issue_diag_reset:
- rc = _base_diag_reset(ioc, sleep_flag);
- return rc;
-}
-
-/**
- * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- Mpi2IOCFactsRequest_t mpi_request;
- Mpi2IOCFactsReply_t mpi_reply;
- struct mpt2sas_facts *facts;
- int mpi_reply_sz, mpi_request_sz, r;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
- if (r) {
- printk(MPT2SAS_ERR_FMT "%s: failed getting to correct state\n",
- ioc->name, __func__);
- return r;
- }
-
- mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
- mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
- memset(&mpi_request, 0, mpi_request_sz);
- mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
- r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
- (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
-
- if (r != 0) {
- printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
- ioc->name, __func__, r);
- return r;
- }
-
- facts = &ioc->facts;
- memset(facts, 0, sizeof(struct mpt2sas_facts));
- facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
- facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
- facts->VP_ID = mpi_reply.VP_ID;
- facts->VF_ID = mpi_reply.VF_ID;
- facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
- facts->MaxChainDepth = mpi_reply.MaxChainDepth;
- facts->WhoInit = mpi_reply.WhoInit;
- facts->NumberOfPorts = mpi_reply.NumberOfPorts;
- facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
- facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
- facts->MaxReplyDescriptorPostQueueDepth =
- le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
- facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
- facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
- if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
- ioc->ir_firmware = 1;
- if ((facts->IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
- ioc->rdpq_array_capable = 1;
- facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
- facts->IOCRequestFrameSize =
- le16_to_cpu(mpi_reply.IOCRequestFrameSize);
- facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
- facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
- ioc->shost->max_id = -1;
- facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
- facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
- facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
- facts->HighPriorityCredit =
- le16_to_cpu(mpi_reply.HighPriorityCredit);
- facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
- facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), "
- "max chains per io(%d)\n", ioc->name, facts->RequestCredit,
- facts->MaxChainDepth));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), "
- "reply frame size(%d)\n", ioc->name,
- facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
- return 0;
-}
-
-/**
- * _base_send_ioc_init - send ioc_init to firmware
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- Mpi2IOCInitRequest_t mpi_request;
- Mpi2IOCInitReply_t mpi_reply;
- int i, r = 0;
- struct timeval current_time;
- u16 ioc_status;
- u32 reply_post_free_array_sz = 0;
- Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
- dma_addr_t reply_post_free_array_dma;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
- mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
- mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
- mpi_request.VF_ID = 0; /* TODO */
- mpi_request.VP_ID = 0;
- mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
- mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
-
- if (_base_is_controller_msix_enabled(ioc))
- mpi_request.HostMSIxVectors = ioc->reply_queue_count;
- mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
- mpi_request.ReplyDescriptorPostQueueDepth =
- cpu_to_le16(ioc->reply_post_queue_depth);
- mpi_request.ReplyFreeQueueDepth =
- cpu_to_le16(ioc->reply_free_queue_depth);
-
- mpi_request.SenseBufferAddressHigh =
- cpu_to_le32((u64)ioc->sense_dma >> 32);
- mpi_request.SystemReplyAddressHigh =
- cpu_to_le32((u64)ioc->reply_dma >> 32);
- mpi_request.SystemRequestFrameBaseAddress =
- cpu_to_le64((u64)ioc->request_dma);
- mpi_request.ReplyFreeQueueAddress =
- cpu_to_le64((u64)ioc->reply_free_dma);
-
- if (ioc->rdpq_array_enable) {
- reply_post_free_array_sz = ioc->reply_queue_count *
- sizeof(Mpi2IOCInitRDPQArrayEntry);
- reply_post_free_array = pci_alloc_consistent(ioc->pdev,
- reply_post_free_array_sz, &reply_post_free_array_dma);
- if (!reply_post_free_array) {
- printk(MPT2SAS_ERR_FMT
- "reply_post_free_array: pci_alloc_consistent failed\n",
- ioc->name);
- r = -ENOMEM;
- goto out;
- }
- memset(reply_post_free_array, 0, reply_post_free_array_sz);
- for (i = 0; i < ioc->reply_queue_count; i++)
- reply_post_free_array[i].RDPQBaseAddress =
- cpu_to_le64(
- (u64)ioc->reply_post[i].reply_post_free_dma);
- mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
- mpi_request.ReplyDescriptorPostQueueAddress =
- cpu_to_le64((u64)reply_post_free_array_dma);
- } else {
- mpi_request.ReplyDescriptorPostQueueAddress =
- cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
- }
-
- /* This time stamp specifies number of milliseconds
- * since epoch ~ midnight January 1, 1970.
- */
- do_gettimeofday(¤t_time);
- mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
- (current_time.tv_usec / 1000));
-
- if (ioc->logging_level & MPT_DEBUG_INIT) {
- __le32 *mfp;
- int i;
-
- mfp = (__le32 *)&mpi_request;
- printk(KERN_INFO "\toffset:data\n");
- for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
- printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
- le32_to_cpu(mfp[i]));
- }
-
- r = _base_handshake_req_reply_wait(ioc,
- sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
- sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
- sleep_flag);
-
- if (r != 0) {
- printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
- ioc->name, __func__, r);
- goto out;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
- mpi_reply.IOCLogInfo) {
- printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__);
- r = -EIO;
- }
-
-out:
- if (reply_post_free_array)
- pci_free_consistent(ioc->pdev, reply_post_free_array_sz,
- reply_post_free_array,
- reply_post_free_array_dma);
- return r;
-}
-
-/**
- * mpt2sas_port_enable_done - command completion routine for port enable
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-u8
-mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply)
-{
- MPI2DefaultReply_t *mpi_reply;
- u16 ioc_status;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
- return 1;
-
- if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED)
- return 1;
-
- ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE;
- if (mpi_reply) {
- ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID;
- memcpy(ioc->port_enable_cmds.reply, mpi_reply,
- mpi_reply->MsgLength*4);
- }
- ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING;
-
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- ioc->port_enable_failed = 1;
-
- if (ioc->is_driver_loading) {
- if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
- mpt2sas_port_enable_complete(ioc);
- return 1;
- } else {
- ioc->start_scan_failed = ioc_status;
- ioc->start_scan = 0;
- return 1;
- }
- }
- complete(&ioc->port_enable_cmds.done);
- return 1;
-}
-
-
-/**
- * _base_send_port_enable - send port_enable(discovery stuff) to firmware
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- Mpi2PortEnableRequest_t *mpi_request;
- Mpi2PortEnableReply_t *mpi_reply;
- unsigned long timeleft;
- int r = 0;
- u16 smid;
- u16 ioc_status;
-
- printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
-
- if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
- printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
- ioc->name, __func__);
- return -EAGAIN;
- }
-
- smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- return -EAGAIN;
- }
-
- ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->port_enable_cmds.smid = smid;
- memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
- mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
-
- init_completion(&ioc->port_enable_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
- 300*HZ);
- if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2PortEnableRequest_t)/4);
- if (ioc->port_enable_cmds.status & MPT2_CMD_RESET)
- r = -EFAULT;
- else
- r = -ETIME;
- goto out;
- }
- mpi_reply = ioc->port_enable_cmds.reply;
-
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n",
- ioc->name, __func__, ioc_status);
- r = -EFAULT;
- goto out;
- }
- out:
- ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
- printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
- "SUCCESS" : "FAILED"));
- return r;
-}
-
-/**
- * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
- * @ioc: per adapter object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2PortEnableRequest_t *mpi_request;
- u16 smid;
-
- printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
-
- if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
- printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
- ioc->name, __func__);
- return -EAGAIN;
- }
-
- smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- return -EAGAIN;
- }
-
- ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->port_enable_cmds.smid = smid;
- memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
- mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
-
- mpt2sas_base_put_smid_default(ioc, smid);
- return 0;
-}
-
-/**
- * _base_determine_wait_on_discovery - desposition
- * @ioc: per adapter object
- *
- * Decide whether to wait on discovery to complete. Used to either
- * locate boot device, or report volumes ahead of physical devices.
- *
- * Returns 1 for wait, 0 for don't wait
- */
-static int
-_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc)
-{
- /* We wait for discovery to complete if IR firmware is loaded.
- * The sas topology events arrive before PD events, so we need time to
- * turn on the bit in ioc->pd_handles to indicate PD
- * Also, it maybe required to report Volumes ahead of physical
- * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
- */
- if (ioc->ir_firmware)
- return 1;
-
- /* if no Bios, then we don't need to wait */
- if (!ioc->bios_pg3.BiosVersion)
- return 0;
-
- /* Bios is present, then we drop down here.
- *
- * If there any entries in the Bios Page 2, then we wait
- * for discovery to complete.
- */
-
- /* Current Boot Device */
- if ((ioc->bios_pg2.CurrentBootDeviceForm &
- MPI2_BIOSPAGE2_FORM_MASK) ==
- MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
- /* Request Boot Device */
- (ioc->bios_pg2.ReqBootDeviceForm &
- MPI2_BIOSPAGE2_FORM_MASK) ==
- MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
- /* Alternate Request Boot Device */
- (ioc->bios_pg2.ReqAltBootDeviceForm &
- MPI2_BIOSPAGE2_FORM_MASK) ==
- MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
- return 0;
-
- return 1;
-}
-
-
-/**
- * _base_unmask_events - turn on notification for this event
- * @ioc: per adapter object
- * @event: firmware event
- *
- * The mask is stored in ioc->event_masks.
- */
-static void
-_base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event)
-{
- u32 desired_event;
-
- if (event >= 128)
- return;
-
- desired_event = (1 << (event % 32));
-
- if (event < 32)
- ioc->event_masks[0] &= ~desired_event;
- else if (event < 64)
- ioc->event_masks[1] &= ~desired_event;
- else if (event < 96)
- ioc->event_masks[2] &= ~desired_event;
- else if (event < 128)
- ioc->event_masks[3] &= ~desired_event;
-}
-
-/**
- * _base_event_notification - send event notification
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- Mpi2EventNotificationRequest_t *mpi_request;
- unsigned long timeleft;
- u16 smid;
- int r = 0;
- int i;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
- printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
- ioc->name, __func__);
- return -EAGAIN;
- }
-
- smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- return -EAGAIN;
- }
- ioc->base_cmds.status = MPT2_CMD_PENDING;
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->base_cmds.smid = smid;
- memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
- mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
- for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
- mpi_request->EventMasks[i] =
- cpu_to_le32(ioc->event_masks[i]);
- init_completion(&ioc->base_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
- if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2EventNotificationRequest_t)/4);
- if (ioc->base_cmds.status & MPT2_CMD_RESET)
- r = -EFAULT;
- else
- r = -ETIME;
- } else
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
- ioc->name, __func__));
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- return r;
-}
-
-/**
- * mpt2sas_base_validate_event_type - validating event types
- * @ioc: per adapter object
- * @event: firmware event
- *
- * This will turn on firmware event notification when application
- * ask for that event. We don't mask events that are already enabled.
- */
-void
-mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type)
-{
- int i, j;
- u32 event_mask, desired_event;
- u8 send_update_to_fw;
-
- for (i = 0, send_update_to_fw = 0; i <
- MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
- event_mask = ~event_type[i];
- desired_event = 1;
- for (j = 0; j < 32; j++) {
- if (!(event_mask & desired_event) &&
- (ioc->event_masks[i] & desired_event)) {
- ioc->event_masks[i] &= ~desired_event;
- send_update_to_fw = 1;
- }
- desired_event = (desired_event << 1);
- }
- }
-
- if (!send_update_to_fw)
- return;
-
- mutex_lock(&ioc->base_cmds.mutex);
- _base_event_notification(ioc, CAN_SLEEP);
- mutex_unlock(&ioc->base_cmds.mutex);
-}
-
-/**
- * _base_diag_reset - the "big hammer" start of day reset
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- u32 host_diagnostic;
- u32 ioc_state;
- u32 count;
- u32 hcb_size;
-
- printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name);
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT "clear interrupts\n",
- ioc->name));
-
- count = 0;
- do {
- /* Write magic sequence to WriteSequence register
- * Loop until in diagnostic mode
- */
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT "write magic "
- "sequence\n", ioc->name));
- writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
- writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
- writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
- writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
- writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
- writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
- writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
-
- /* wait 100 msec */
- if (sleep_flag == CAN_SLEEP)
- msleep(100);
- else
- mdelay(100);
-
- if (count++ > 20)
- goto out;
-
- host_diagnostic = readl(&ioc->chip->HostDiagnostic);
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT "wrote magic "
- "sequence: count(%d), host_diagnostic(0x%08x)\n",
- ioc->name, count, host_diagnostic));
-
- } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
-
- hcb_size = readl(&ioc->chip->HCBSize);
-
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT "diag reset: issued\n",
- ioc->name));
- writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
- &ioc->chip->HostDiagnostic);
-
- /* This delay allows the chip PCIe hardware time to finish reset tasks*/
- if (sleep_flag == CAN_SLEEP)
- msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
- else
- mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
-
- /* Approximately 300 second max wait */
- for (count = 0; count < (300000000 /
- MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
-
- host_diagnostic = readl(&ioc->chip->HostDiagnostic);
-
- if (host_diagnostic == 0xFFFFFFFF)
- goto out;
- if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
- break;
-
- /* Wait to pass the second read delay window */
- if (sleep_flag == CAN_SLEEP)
- msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
- /1000);
- else
- mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
- /1000);
- }
-
- if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
-
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter "
- "assuming the HCB Address points to good F/W\n",
- ioc->name));
- host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
- host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
- writel(host_diagnostic, &ioc->chip->HostDiagnostic);
-
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT
- "re-enable the HCDW\n", ioc->name));
- writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
- &ioc->chip->HCBSize);
- }
-
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter\n",
- ioc->name));
- writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
- &ioc->chip->HostDiagnostic);
-
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT "disable writes to the "
- "diagnostic register\n", ioc->name));
- writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
-
- drsprintk(ioc, printk(MPT2SAS_INFO_FMT "Wait for FW to go to the "
- "READY state\n", ioc->name));
- ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
- sleep_flag);
- if (ioc_state) {
- printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
- " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
- goto out;
- }
-
- printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name);
- return 0;
-
- out:
- printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name);
- return -EFAULT;
-}
-
-/**
- * _base_make_ioc_ready - put controller in READY state
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- * @type: FORCE_BIG_HAMMER or SOFT_RESET
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
- enum reset_type type)
-{
- u32 ioc_state;
- int rc;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- if (ioc->pci_error_recovery)
- return 0;
-
- ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n",
- ioc->name, __func__, ioc_state));
-
- if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
- return 0;
-
- if (ioc_state & MPI2_DOORBELL_USED) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
- "active!\n", ioc->name));
- goto issue_diag_reset;
- }
-
- if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
- mpt2sas_base_fault_info(ioc, ioc_state &
- MPI2_DOORBELL_DATA_MASK);
- goto issue_diag_reset;
- }
-
- if (type == FORCE_BIG_HAMMER)
- goto issue_diag_reset;
-
- if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
- if (!(_base_send_ioc_reset(ioc,
- MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
- ioc->ioc_reset_count++;
- return 0;
- }
-
- issue_diag_reset:
- rc = _base_diag_reset(ioc, CAN_SLEEP);
- ioc->ioc_reset_count++;
- return rc;
-}
-
-/**
- * _base_make_ioc_operational - put controller in OPERATIONAL state
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- int r, i;
- unsigned long flags;
- u32 reply_address;
- u16 smid;
- struct _tr_list *delayed_tr, *delayed_tr_next;
- u8 hide_flag;
- struct adapter_reply_queue *reply_q;
- long reply_post_free;
- u32 reply_post_free_sz, index = 0;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- /* clean the delayed target reset list */
- list_for_each_entry_safe(delayed_tr, delayed_tr_next,
- &ioc->delayed_tr_list, list) {
- list_del(&delayed_tr->list);
- kfree(delayed_tr);
- }
-
- list_for_each_entry_safe(delayed_tr, delayed_tr_next,
- &ioc->delayed_tr_volume_list, list) {
- list_del(&delayed_tr->list);
- kfree(delayed_tr);
- }
-
- /* initialize the scsi lookup free list */
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- INIT_LIST_HEAD(&ioc->free_list);
- smid = 1;
- for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
- INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list);
- ioc->scsi_lookup[i].cb_idx = 0xFF;
- ioc->scsi_lookup[i].smid = smid;
- ioc->scsi_lookup[i].scmd = NULL;
- ioc->scsi_lookup[i].direct_io = 0;
- list_add_tail(&ioc->scsi_lookup[i].tracker_list,
- &ioc->free_list);
- }
-
- /* hi-priority queue */
- INIT_LIST_HEAD(&ioc->hpr_free_list);
- smid = ioc->hi_priority_smid;
- for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
- ioc->hpr_lookup[i].cb_idx = 0xFF;
- ioc->hpr_lookup[i].smid = smid;
- list_add_tail(&ioc->hpr_lookup[i].tracker_list,
- &ioc->hpr_free_list);
- }
-
- /* internal queue */
- INIT_LIST_HEAD(&ioc->internal_free_list);
- smid = ioc->internal_smid;
- for (i = 0; i < ioc->internal_depth; i++, smid++) {
- ioc->internal_lookup[i].cb_idx = 0xFF;
- ioc->internal_lookup[i].smid = smid;
- list_add_tail(&ioc->internal_lookup[i].tracker_list,
- &ioc->internal_free_list);
- }
-
- /* chain pool */
- INIT_LIST_HEAD(&ioc->free_chain_list);
- for (i = 0; i < ioc->chain_depth; i++)
- list_add_tail(&ioc->chain_lookup[i].tracker_list,
- &ioc->free_chain_list);
-
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
- /* initialize Reply Free Queue */
- for (i = 0, reply_address = (u32)ioc->reply_dma ;
- i < ioc->reply_free_queue_depth ; i++, reply_address +=
- ioc->reply_sz)
- ioc->reply_free[i] = cpu_to_le32(reply_address);
-
- /* initialize reply queues */
- if (ioc->is_driver_loading)
- _base_assign_reply_queues(ioc);
-
- /* initialize Reply Post Free Queue */
- reply_post_free_sz = ioc->reply_post_queue_depth *
- sizeof(Mpi2DefaultReplyDescriptor_t);
- reply_post_free = (long)ioc->reply_post[index].reply_post_free;
- list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
- reply_q->reply_post_host_index = 0;
- reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
- reply_post_free;
- for (i = 0; i < ioc->reply_post_queue_depth; i++)
- reply_q->reply_post_free[i].Words =
- cpu_to_le64(ULLONG_MAX);
- if (!_base_is_controller_msix_enabled(ioc))
- goto skip_init_reply_post_free_queue;
- /*
- * If RDPQ is enabled, switch to the next allocation.
- * Otherwise advance within the contiguous region.
- */
- if (ioc->rdpq_array_enable)
- reply_post_free = (long)
- ioc->reply_post[++index].reply_post_free;
- else
- reply_post_free += reply_post_free_sz;
- }
- skip_init_reply_post_free_queue:
-
- r = _base_send_ioc_init(ioc, sleep_flag);
- if (r)
- return r;
-
- /* initialize reply free host index */
- ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
- writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
-
- /* initialize reply post host index */
- list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
- writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
- &ioc->chip->ReplyPostHostIndex);
- if (!_base_is_controller_msix_enabled(ioc))
- goto skip_init_reply_post_host_index;
- }
-
- skip_init_reply_post_host_index:
-
- _base_unmask_interrupts(ioc);
-
- r = _base_event_notification(ioc, sleep_flag);
- if (r)
- return r;
-
- if (sleep_flag == CAN_SLEEP)
- _base_static_config_pages(ioc);
-
-
- if (ioc->is_driver_loading) {
- if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
- == 0x80) {
- hide_flag = (u8) (
- le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
- MFG_PAGE10_HIDE_SSDS_MASK);
- if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
- ioc->mfg_pg10_hide_flag = hide_flag;
- }
- ioc->wait_for_discovery_to_complete =
- _base_determine_wait_on_discovery(ioc);
- return r; /* scan_start and scan_finished support */
- }
- r = _base_send_port_enable(ioc, sleep_flag);
- if (r)
- return r;
-
- return r;
-}
-
-/**
- * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap)
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-void
-mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
-{
- struct pci_dev *pdev = ioc->pdev;
-
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- /* synchronizing freeing resource with pci_access_mutex lock */
- mutex_lock(&ioc->pci_access_mutex);
- if (ioc->chip_phys && ioc->chip) {
- _base_mask_interrupts(ioc);
- ioc->shost_recovery = 1;
- _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
- ioc->shost_recovery = 0;
- }
-
- _base_free_irq(ioc);
- _base_disable_msix(ioc);
-
- if (ioc->chip_phys && ioc->chip)
- iounmap(ioc->chip);
- ioc->chip_phys = 0;
-
- if (pci_is_enabled(pdev)) {
- pci_release_selected_regions(ioc->pdev, ioc->bars);
- pci_disable_pcie_error_reporting(pdev);
- pci_disable_device(pdev);
- }
- mutex_unlock(&ioc->pci_access_mutex);
- return;
-}
-
-/**
- * mpt2sas_base_attach - attach controller instance
- * @ioc: per adapter object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
-{
- int r, i;
- int cpu_id, last_cpu_id = 0;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- /* setup cpu_msix_table */
- ioc->cpu_count = num_online_cpus();
- for_each_online_cpu(cpu_id)
- last_cpu_id = cpu_id;
- ioc->cpu_msix_table_sz = last_cpu_id + 1;
- ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
- ioc->reply_queue_count = 1;
- if (!ioc->cpu_msix_table) {
- dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for "
- "cpu_msix_table failed!!!\n", ioc->name));
- r = -ENOMEM;
- goto out_free_resources;
- }
-
- if (ioc->is_warpdrive) {
- ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
- sizeof(resource_size_t *), GFP_KERNEL);
- if (!ioc->reply_post_host_index) {
- dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation "
- "for cpu_msix_table failed!!!\n", ioc->name));
- r = -ENOMEM;
- goto out_free_resources;
- }
- }
-
- ioc->rdpq_array_enable_assigned = 0;
- ioc->dma_mask = 0;
- r = mpt2sas_base_map_resources(ioc);
- if (r)
- goto out_free_resources;
-
- if (ioc->is_warpdrive) {
- ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
- &ioc->chip->ReplyPostHostIndex;
-
- for (i = 1; i < ioc->cpu_msix_table_sz; i++)
- ioc->reply_post_host_index[i] =
- (resource_size_t __iomem *)
- ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
- * 4)));
- }
-
- pci_set_drvdata(ioc->pdev, ioc->shost);
- r = _base_get_ioc_facts(ioc, CAN_SLEEP);
- if (r)
- goto out_free_resources;
-
- r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
- if (r)
- goto out_free_resources;
-
- ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
- sizeof(struct mpt2sas_port_facts), GFP_KERNEL);
- if (!ioc->pfacts) {
- r = -ENOMEM;
- goto out_free_resources;
- }
-
- for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
- r = _base_get_port_facts(ioc, i, CAN_SLEEP);
- if (r)
- goto out_free_resources;
- }
-
- r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
- if (r)
- goto out_free_resources;
-
- init_waitqueue_head(&ioc->reset_wq);
- /* allocate memory pd handle bitmask list */
- ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
- if (ioc->facts.MaxDevHandle % 8)
- ioc->pd_handles_sz++;
- ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
- GFP_KERNEL);
- if (!ioc->pd_handles) {
- r = -ENOMEM;
- goto out_free_resources;
- }
- ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
- GFP_KERNEL);
- if (!ioc->blocking_handles) {
- r = -ENOMEM;
- goto out_free_resources;
- }
- ioc->fwfault_debug = mpt2sas_fwfault_debug;
-
- /* base internal command bits */
- mutex_init(&ioc->base_cmds.mutex);
- ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-
- /* port_enable command bits */
- ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
- ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
-
- /* transport internal command bits */
- ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
- ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
- mutex_init(&ioc->transport_cmds.mutex);
-
- /* scsih internal command bits */
- ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
- ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
- mutex_init(&ioc->scsih_cmds.mutex);
-
- /* task management internal command bits */
- ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
- mutex_init(&ioc->tm_cmds.mutex);
-
- /* config page internal command bits */
- ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- mutex_init(&ioc->config_cmds.mutex);
-
- /* ctl module internal command bits */
- ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
- ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
- mutex_init(&ioc->ctl_cmds.mutex);
-
- if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
- !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
- !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
- !ioc->ctl_cmds.sense) {
- r = -ENOMEM;
- goto out_free_resources;
- }
-
- if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
- !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
- !ioc->config_cmds.reply || !ioc->ctl_cmds.reply) {
- r = -ENOMEM;
- goto out_free_resources;
- }
-
- for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
- ioc->event_masks[i] = -1;
-
- /* here we enable the events we care about */
- _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
- _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
- _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
- _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
- _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
- _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
- _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
- _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
- _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
- _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
- _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
- r = _base_make_ioc_operational(ioc, CAN_SLEEP);
- if (r)
- goto out_free_resources;
-
- ioc->non_operational_loop = 0;
-
- return 0;
-
- out_free_resources:
-
- ioc->remove_host = 1;
- mpt2sas_base_free_resources(ioc);
- _base_release_memory_pools(ioc);
- pci_set_drvdata(ioc->pdev, NULL);
- kfree(ioc->cpu_msix_table);
- if (ioc->is_warpdrive)
- kfree(ioc->reply_post_host_index);
- kfree(ioc->pd_handles);
- kfree(ioc->blocking_handles);
- kfree(ioc->tm_cmds.reply);
- kfree(ioc->transport_cmds.reply);
- kfree(ioc->scsih_cmds.reply);
- kfree(ioc->config_cmds.reply);
- kfree(ioc->base_cmds.reply);
- kfree(ioc->port_enable_cmds.reply);
- kfree(ioc->ctl_cmds.reply);
- kfree(ioc->ctl_cmds.sense);
- kfree(ioc->pfacts);
- ioc->ctl_cmds.reply = NULL;
- ioc->base_cmds.reply = NULL;
- ioc->tm_cmds.reply = NULL;
- ioc->scsih_cmds.reply = NULL;
- ioc->transport_cmds.reply = NULL;
- ioc->config_cmds.reply = NULL;
- ioc->pfacts = NULL;
- return r;
-}
-
-
-/**
- * mpt2sas_base_detach - remove controller instance
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-void
-mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
-{
-
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- mpt2sas_base_stop_watchdog(ioc);
- mpt2sas_base_free_resources(ioc);
- _base_release_memory_pools(ioc);
- pci_set_drvdata(ioc->pdev, NULL);
- kfree(ioc->cpu_msix_table);
- if (ioc->is_warpdrive)
- kfree(ioc->reply_post_host_index);
- kfree(ioc->pd_handles);
- kfree(ioc->blocking_handles);
- kfree(ioc->pfacts);
- kfree(ioc->ctl_cmds.reply);
- kfree(ioc->ctl_cmds.sense);
- kfree(ioc->base_cmds.reply);
- kfree(ioc->port_enable_cmds.reply);
- kfree(ioc->tm_cmds.reply);
- kfree(ioc->transport_cmds.reply);
- kfree(ioc->scsih_cmds.reply);
- kfree(ioc->config_cmds.reply);
-}
-
-/**
- * _base_reset_handler - reset callback handler (for base)
- * @ioc: per adapter object
- * @reset_phase: phase
- *
- * The handler for doing any required cleanup or initialization.
- *
- * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
- * MPT2_IOC_DONE_RESET
- *
- * Return nothing.
- */
-static void
-_base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
-{
- mpt2sas_scsih_reset_handler(ioc, reset_phase);
- mpt2sas_ctl_reset_handler(ioc, reset_phase);
- switch (reset_phase) {
- case MPT2_IOC_PRE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
- break;
- case MPT2_IOC_AFTER_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
- if (ioc->transport_cmds.status & MPT2_CMD_PENDING) {
- ioc->transport_cmds.status |= MPT2_CMD_RESET;
- mpt2sas_base_free_smid(ioc, ioc->transport_cmds.smid);
- complete(&ioc->transport_cmds.done);
- }
- if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
- ioc->base_cmds.status |= MPT2_CMD_RESET;
- mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
- complete(&ioc->base_cmds.done);
- }
- if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
- ioc->port_enable_failed = 1;
- ioc->port_enable_cmds.status |= MPT2_CMD_RESET;
- mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
- if (ioc->is_driver_loading) {
- ioc->start_scan_failed =
- MPI2_IOCSTATUS_INTERNAL_ERROR;
- ioc->start_scan = 0;
- ioc->port_enable_cmds.status =
- MPT2_CMD_NOT_USED;
- } else
- complete(&ioc->port_enable_cmds.done);
-
- }
- if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
- ioc->config_cmds.status |= MPT2_CMD_RESET;
- mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
- ioc->config_cmds.smid = USHRT_MAX;
- complete(&ioc->config_cmds.done);
- }
- break;
- case MPT2_IOC_DONE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
- break;
- }
-}
-
-/**
- * _wait_for_commands_to_complete - reset controller
- * @ioc: Pointer to MPT_ADAPTER structure
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * This function waiting(3s) for all pending commands to complete
- * prior to putting controller in reset.
- */
-static void
-_wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- u32 ioc_state;
- unsigned long flags;
- u16 i;
-
- ioc->pending_io_count = 0;
- if (sleep_flag != CAN_SLEEP)
- return;
-
- ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
- if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
- return;
-
- /* pending command count */
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- for (i = 0; i < ioc->scsiio_depth; i++)
- if (ioc->scsi_lookup[i].cb_idx != 0xFF)
- ioc->pending_io_count++;
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
- if (!ioc->pending_io_count)
- return;
-
- /* wait for pending commands to complete */
- wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
-}
-
-/**
- * mpt2sas_base_hard_reset_handler - reset controller
- * @ioc: Pointer to MPT_ADAPTER structure
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- * @type: FORCE_BIG_HAMMER or SOFT_RESET
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
- enum reset_type type)
-{
- int r;
- unsigned long flags;
-
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
- __func__));
-
- if (ioc->pci_error_recovery) {
- printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
- ioc->name, __func__);
- r = 0;
- goto out_unlocked;
- }
-
- if (mpt2sas_fwfault_debug)
- mpt2sas_halt_firmware(ioc);
-
- /* TODO - What we really should be doing is pulling
- * out all the code associated with NO_SLEEP; its never used.
- * That is legacy code from mpt fusion driver, ported over.
- * I will leave this BUG_ON here for now till its been resolved.
- */
- BUG_ON(sleep_flag == NO_SLEEP);
-
- /* wait for an active reset in progress to complete */
- if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
- do {
- ssleep(1);
- } while (ioc->shost_recovery == 1);
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
- __func__));
- return ioc->ioc_reset_in_progress_status;
- }
-
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- ioc->shost_recovery = 1;
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-
- _base_reset_handler(ioc, MPT2_IOC_PRE_RESET);
- _wait_for_commands_to_complete(ioc, sleep_flag);
- _base_mask_interrupts(ioc);
- r = _base_make_ioc_ready(ioc, sleep_flag, type);
- if (r)
- goto out;
- _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);
-
- /* If this hard reset is called while port enable is active, then
- * there is no reason to call make_ioc_operational
- */
- if (ioc->is_driver_loading && ioc->port_enable_failed) {
- ioc->remove_host = 1;
- r = -EFAULT;
- goto out;
- }
-
- r = _base_get_ioc_facts(ioc, CAN_SLEEP);
- if (r)
- goto out;
-
- if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
- panic("%s: Issue occurred with flashing controller firmware."
- "Please reboot the system and ensure that the correct"
- " firmware version is running\n", ioc->name);
-
- r = _base_make_ioc_operational(ioc, sleep_flag);
- if (!r)
- _base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
- out:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %s\n",
- ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
-
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- ioc->ioc_reset_in_progress_status = r;
- ioc->shost_recovery = 0;
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
- mutex_unlock(&ioc->reset_in_progress_mutex);
-
- out_unlocked:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
- __func__));
- return r;
-}
+++ /dev/null
-/*
- * This is the Fusion MPT base driver providing common API layer interface
- * for access to MPT (Message Passing Technology) firmware.
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_base.h
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_BASE_H_INCLUDED
-#define MPT2SAS_BASE_H_INCLUDED
-
-#include "mpi/mpi2_type.h"
-#include "mpi/mpi2.h"
-#include "mpi/mpi2_ioc.h"
-#include "mpi/mpi2_cnfg.h"
-#include "mpi/mpi2_init.h"
-#include "mpi/mpi2_raid.h"
-#include "mpi/mpi2_tool.h"
-#include "mpi/mpi2_sas.h"
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsi_transport_sas.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_eh.h>
-
-#include "mpt2sas_debug.h"
-
-/* driver versioning info */
-#define MPT2SAS_DRIVER_NAME "mpt2sas"
-#define MPT2SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
-#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "20.100.00.00"
-#define MPT2SAS_MAJOR_VERSION 20
-#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 00
-#define MPT2SAS_RELEASE_VERSION 00
-
-/*
- * Set MPT2SAS_SG_DEPTH value based on user input.
- */
-#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
-#if CONFIG_SCSI_MPT2SAS_MAX_SGE < 16
-#define MPT2SAS_SG_DEPTH 16
-#elif CONFIG_SCSI_MPT2SAS_MAX_SGE > 128
-#define MPT2SAS_SG_DEPTH 128
-#else
-#define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE
-#endif
-#else
-#define MPT2SAS_SG_DEPTH 128 /* MAX_HW_SEGMENTS */
-#endif
-
-
-/*
- * Generic Defines
- */
-#define MPT2SAS_SATA_QUEUE_DEPTH 32
-#define MPT2SAS_SAS_QUEUE_DEPTH 254
-#define MPT2SAS_RAID_QUEUE_DEPTH 128
-
-#define MPT_NAME_LENGTH 32 /* generic length of strings */
-#define MPT_STRING_LENGTH 64
-
-#define MPT_MAX_CALLBACKS 16
-
-
-#define CAN_SLEEP 1
-#define NO_SLEEP 0
-
-#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */
-
-#define MPI2_HIM_MASK 0xFFFFFFFF /* mask every bit*/
-
-#define MPT2SAS_INVALID_DEVICE_HANDLE 0xFFFF
-
-
-/*
- * reset phases
- */
-#define MPT2_IOC_PRE_RESET 1 /* prior to host reset */
-#define MPT2_IOC_AFTER_RESET 2 /* just after host reset */
-#define MPT2_IOC_DONE_RESET 3 /* links re-initialized */
-
-/*
- * logging format
- */
-#define MPT2SAS_FMT "%s: "
-#define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT
-#define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT
-#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT
-#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT
-
-/*
- * Dell HBA branding
- */
-#define MPT2SAS_DELL_BRANDING_SIZE 32
-
-#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
-#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
-#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
-#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
-#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
-#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
-#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
-
-/*
- * Dell HBA SSDIDs
- */
-#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
-#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
-#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
-#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
-#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
-#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
-#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
-
-/*
- * Intel HBA branding
- */
-#define MPT2SAS_INTEL_RMS25JB080_BRANDING \
- "Intel(R) Integrated RAID Module RMS25JB080"
-#define MPT2SAS_INTEL_RMS25JB040_BRANDING \
- "Intel(R) Integrated RAID Module RMS25JB040"
-#define MPT2SAS_INTEL_RMS25KB080_BRANDING \
- "Intel(R) Integrated RAID Module RMS25KB080"
-#define MPT2SAS_INTEL_RMS25KB040_BRANDING \
- "Intel(R) Integrated RAID Module RMS25KB040"
-#define MPT2SAS_INTEL_RMS25LB040_BRANDING \
- "Intel(R) Integrated RAID Module RMS25LB040"
-#define MPT2SAS_INTEL_RMS25LB080_BRANDING \
- "Intel(R) Integrated RAID Module RMS25LB080"
-#define MPT2SAS_INTEL_RMS2LL080_BRANDING \
- "Intel Integrated RAID Module RMS2LL080"
-#define MPT2SAS_INTEL_RMS2LL040_BRANDING \
- "Intel Integrated RAID Module RMS2LL040"
-#define MPT2SAS_INTEL_RS25GB008_BRANDING \
- "Intel(R) RAID Controller RS25GB008"
-#define MPT2SAS_INTEL_SSD910_BRANDING \
- "Intel(R) SSD 910 Series"
-/*
- * Intel HBA SSDIDs
- */
-#define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516
-#define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517
-#define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518
-#define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519
-#define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A
-#define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B
-#define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E
-#define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F
-#define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000
-#define MPT2SAS_INTEL_SSD910_SSDID 0x3700
-
-/*
- * HP HBA branding
- */
-#define MPT2SAS_HP_3PAR_SSVID 0x1590
-#define MPT2SAS_HP_2_4_INTERNAL_BRANDING "HP H220 Host Bus Adapter"
-#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING "HP H221 Host Bus Adapter"
-#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING "HP H222 Host Bus Adapter"
-#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING "HP H220i Host Bus Adapter"
-#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING "HP H210i Host Bus Adapter"
-
-/*
- * HO HBA SSDIDs
- */
-#define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041
-#define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042
-#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043
-#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044
-#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046
-
-/*
- * WarpDrive Specific Log codes
- */
-
-#define MPT2_WARPDRIVE_LOGENTRY (0x8002)
-#define MPT2_WARPDRIVE_LC_SSDT (0x41)
-#define MPT2_WARPDRIVE_LC_SSDLW (0x43)
-#define MPT2_WARPDRIVE_LC_SSDLF (0x44)
-#define MPT2_WARPDRIVE_LC_BRMF (0x4D)
-
-/*
- * per target private data
- */
-#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01
-#define MPT_TARGET_FLAGS_VOLUME 0x02
-#define MPT_TARGET_FLAGS_DELETED 0x04
-
-/**
- * struct MPT2SAS_TARGET - starget private hostdata
- * @starget: starget object
- * @sas_address: target sas address
- * @raid_device: raid_device pointer to access volume data
- * @handle: device handle
- * @num_luns: number luns
- * @flags: MPT_TARGET_FLAGS_XXX flags
- * @deleted: target flaged for deletion
- * @tm_busy: target is busy with TM request.
- * @sdev: The sas_device associated with this target
- */
-struct MPT2SAS_TARGET {
- struct scsi_target *starget;
- u64 sas_address;
- struct _raid_device *raid_device;
- u16 handle;
- int num_luns;
- u32 flags;
- u8 deleted;
- u8 tm_busy;
- struct _sas_device *sdev;
-};
-
-
-/*
- * per device private data
- */
-#define MPT_DEVICE_FLAGS_INIT 0x01
-#define MPT_DEVICE_TLR_ON 0x02
-
-/**
- * struct MPT2SAS_DEVICE - sdev private hostdata
- * @sas_target: starget private hostdata
- * @lun: lun number
- * @flags: MPT_DEVICE_XXX flags
- * @configured_lun: lun is configured
- * @block: device is in SDEV_BLOCK state
- * @tlr_snoop_check: flag used in determining whether to disable TLR
- */
-
-/* OEM Identifiers */
-#define MFG10_OEM_ID_INVALID (0x00000000)
-#define MFG10_OEM_ID_DELL (0x00000001)
-#define MFG10_OEM_ID_FSC (0x00000002)
-#define MFG10_OEM_ID_SUN (0x00000003)
-#define MFG10_OEM_ID_IBM (0x00000004)
-
-/* GENERIC Flags 0*/
-#define MFG10_GF0_OCE_DISABLED (0x00000001)
-#define MFG10_GF0_R1E_DRIVE_COUNT (0x00000002)
-#define MFG10_GF0_R10_DISPLAY (0x00000004)
-#define MFG10_GF0_SSD_DATA_SCRUB_DISABLE (0x00000008)
-#define MFG10_GF0_SINGLE_DRIVE_R0 (0x00000010)
-
-/* OEM Specific Flags will come from OEM specific header files */
-typedef struct _MPI2_CONFIG_PAGE_MAN_10 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 00h */
- U8 OEMIdentifier; /* 04h */
- U8 Reserved1; /* 05h */
- U16 Reserved2; /* 08h */
- U32 Reserved3; /* 0Ch */
- U32 GenericFlags0; /* 10h */
- U32 GenericFlags1; /* 14h */
- U32 Reserved4; /* 18h */
- U32 OEMSpecificFlags0; /* 1Ch */
- U32 OEMSpecificFlags1; /* 20h */
- U32 Reserved5[18]; /* 24h-60h*/
-} MPI2_CONFIG_PAGE_MAN_10,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10,
- Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t;
-
-#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003)
-#define MFG_PAGE10_HIDE_ALL_DISKS (0x00)
-#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01)
-#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02)
-
-
-struct MPT2SAS_DEVICE {
- struct MPT2SAS_TARGET *sas_target;
- unsigned int lun;
- u32 flags;
- u8 configured_lun;
- u8 block;
- u8 tlr_snoop_check;
-};
-
-#define MPT2_CMD_NOT_USED 0x8000 /* free */
-#define MPT2_CMD_COMPLETE 0x0001 /* completed */
-#define MPT2_CMD_PENDING 0x0002 /* pending */
-#define MPT2_CMD_REPLY_VALID 0x0004 /* reply is valid */
-#define MPT2_CMD_RESET 0x0008 /* host reset dropped the command */
-
-/**
- * struct _internal_cmd - internal commands struct
- * @mutex: mutex
- * @done: completion
- * @reply: reply message pointer
- * @sense: sense data
- * @status: MPT2_CMD_XXX status
- * @smid: system message id
- */
-struct _internal_cmd {
- struct mutex mutex;
- struct completion done;
- void *reply;
- void *sense;
- u16 status;
- u16 smid;
-};
-
-
-/**
- * struct _sas_device - attached device information
- * @list: sas device list
- * @starget: starget object
- * @sas_address: device sas address
- * @device_name: retrieved from the SAS IDENTIFY frame.
- * @handle: device handle
- * @sas_address_parent: sas address of parent expander or sas host
- * @enclosure_handle: enclosure handle
- * @enclosure_logical_id: enclosure logical identifier
- * @volume_handle: volume handle (valid when hidden raid member)
- * @volume_wwid: volume unique identifier
- * @device_info: bitfield provides detailed info about the device
- * @id: target id
- * @channel: target channel
- * @slot: number number
- * @phy: phy identifier provided in sas device page 0
- * @responding: used in _scsih_sas_device_mark_responding
- * @pfa_led_on: flag for PFA LED status
- */
-struct _sas_device {
- struct list_head list;
- struct scsi_target *starget;
- u64 sas_address;
- u64 device_name;
- u16 handle;
- u64 sas_address_parent;
- u16 enclosure_handle;
- u64 enclosure_logical_id;
- u16 volume_handle;
- u64 volume_wwid;
- u32 device_info;
- int id;
- int channel;
- u16 slot;
- u8 phy;
- u8 responding;
- u8 pfa_led_on;
- struct kref refcount;
-};
-
-static inline void sas_device_get(struct _sas_device *s)
-{
- kref_get(&s->refcount);
-}
-
-static inline void sas_device_free(struct kref *r)
-{
- kfree(container_of(r, struct _sas_device, refcount));
-}
-
-static inline void sas_device_put(struct _sas_device *s)
-{
- kref_put(&s->refcount, sas_device_free);
-}
-
-/**
- * struct _raid_device - raid volume link list
- * @list: sas device list
- * @starget: starget object
- * @sdev: scsi device struct (volumes are single lun)
- * @wwid: unique identifier for the volume
- * @handle: device handle
- * @block_size: Block size of the volume
- * @id: target id
- * @channel: target channel
- * @volume_type: the raid level
- * @device_info: bitfield provides detailed info about the hidden components
- * @num_pds: number of hidden raid components
- * @responding: used in _scsih_raid_device_mark_responding
- * @percent_complete: resync percent complete
- * @direct_io_enabled: Whether direct io to PDs are allowed or not
- * @stripe_exponent: X where 2powX is the stripe sz in blocks
- * @block_exponent: X where 2powX is the block sz in bytes
- * @max_lba: Maximum number of LBA in the volume
- * @stripe_sz: Stripe Size of the volume
- * @device_info: Device info of the volume member disk
- * @pd_handle: Array of handles of the physical drives for direct I/O in le16
- */
-#define MPT_MAX_WARPDRIVE_PDS 8
-struct _raid_device {
- struct list_head list;
- struct scsi_target *starget;
- struct scsi_device *sdev;
- u64 wwid;
- u16 handle;
- u16 block_sz;
- int id;
- int channel;
- u8 volume_type;
- u8 num_pds;
- u8 responding;
- u8 percent_complete;
- u8 direct_io_enabled;
- u8 stripe_exponent;
- u8 block_exponent;
- u64 max_lba;
- u32 stripe_sz;
- u32 device_info;
- u16 pd_handle[MPT_MAX_WARPDRIVE_PDS];
-};
-
-/**
- * struct _boot_device - boot device info
- * @is_raid: flag to indicate whether this is volume
- * @device: holds pointer for either struct _sas_device or
- * struct _raid_device
- */
-struct _boot_device {
- u8 is_raid;
- void *device;
-};
-
-/**
- * struct _sas_port - wide/narrow sas port information
- * @port_list: list of ports belonging to expander
- * @num_phys: number of phys belonging to this port
- * @remote_identify: attached device identification
- * @rphy: sas transport rphy object
- * @port: sas transport wide/narrow port object
- * @phy_list: _sas_phy list objects belonging to this port
- */
-struct _sas_port {
- struct list_head port_list;
- u8 num_phys;
- struct sas_identify remote_identify;
- struct sas_rphy *rphy;
- struct sas_port *port;
- struct list_head phy_list;
-};
-
-/**
- * struct _sas_phy - phy information
- * @port_siblings: list of phys belonging to a port
- * @identify: phy identification
- * @remote_identify: attached device identification
- * @phy: sas transport phy object
- * @phy_id: unique phy id
- * @handle: device handle for this phy
- * @attached_handle: device handle for attached device
- * @phy_belongs_to_port: port has been created for this phy
- */
-struct _sas_phy {
- struct list_head port_siblings;
- struct sas_identify identify;
- struct sas_identify remote_identify;
- struct sas_phy *phy;
- u8 phy_id;
- u16 handle;
- u16 attached_handle;
- u8 phy_belongs_to_port;
-};
-
-/**
- * struct _sas_node - sas_host/expander information
- * @list: list of expanders
- * @parent_dev: parent device class
- * @num_phys: number phys belonging to this sas_host/expander
- * @sas_address: sas address of this sas_host/expander
- * @handle: handle for this sas_host/expander
- * @sas_address_parent: sas address of parent expander or sas host
- * @enclosure_handle: handle for this a member of an enclosure
- * @device_info: bitwise defining capabilities of this sas_host/expander
- * @responding: used in _scsih_expander_device_mark_responding
- * @phy: a list of phys that make up this sas_host/expander
- * @sas_port_list: list of ports attached to this sas_host/expander
- */
-struct _sas_node {
- struct list_head list;
- struct device *parent_dev;
- u8 num_phys;
- u64 sas_address;
- u16 handle;
- u64 sas_address_parent;
- u16 enclosure_handle;
- u64 enclosure_logical_id;
- u8 responding;
- struct _sas_phy *phy;
- struct list_head sas_port_list;
-};
-
-/**
- * enum reset_type - reset state
- * @FORCE_BIG_HAMMER: issue diagnostic reset
- * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
- */
-enum reset_type {
- FORCE_BIG_HAMMER,
- SOFT_RESET,
-};
-
-/**
- * struct chain_tracker - firmware chain tracker
- * @chain_buffer: chain buffer
- * @chain_buffer_dma: physical address
- * @tracker_list: list of free request (ioc->free_chain_list)
- */
-struct chain_tracker {
- void *chain_buffer;
- dma_addr_t chain_buffer_dma;
- struct list_head tracker_list;
-};
-
-/**
- * struct scsiio_tracker - scsi mf request tracker
- * @smid: system message id
- * @scmd: scsi request pointer
- * @cb_idx: callback index
- * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
- * @chain_list: list of chains associated to this IO
- * @tracker_list: list of free request (ioc->free_list)
- */
-struct scsiio_tracker {
- u16 smid;
- struct scsi_cmnd *scmd;
- u8 cb_idx;
- u8 direct_io;
- struct list_head chain_list;
- struct list_head tracker_list;
-};
-
-/**
- * struct request_tracker - firmware request tracker
- * @smid: system message id
- * @cb_idx: callback index
- * @tracker_list: list of free request (ioc->free_list)
- */
-struct request_tracker {
- u16 smid;
- u8 cb_idx;
- struct list_head tracker_list;
-};
-
-/**
- * struct _tr_list - target reset list
- * @handle: device handle
- * @state: state machine
- */
-struct _tr_list {
- struct list_head list;
- u16 handle;
- u16 state;
-};
-
-typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
-
-/**
- * struct adapter_reply_queue - the reply queue struct
- * @ioc: per adapter object
- * @msix_index: msix index into vector table
- * @vector: irq vector
- * @reply_post_host_index: head index in the pool where FW completes IO
- * @reply_post_free: reply post base virt address
- * @name: the name registered to request_irq()
- * @busy: isr is actively processing replies on another cpu
- * @list: this list
-*/
-struct adapter_reply_queue {
- struct MPT2SAS_ADAPTER *ioc;
- u8 msix_index;
- unsigned int vector;
- u32 reply_post_host_index;
- Mpi2ReplyDescriptorsUnion_t *reply_post_free;
- char name[MPT_NAME_LENGTH];
- atomic_t busy;
- cpumask_var_t affinity_hint;
- struct list_head list;
-};
-
-/* IOC Facts and Port Facts converted from little endian to cpu */
-union mpi2_version_union {
- MPI2_VERSION_STRUCT Struct;
- u32 Word;
-};
-
-struct mpt2sas_facts {
- u16 MsgVersion;
- u16 HeaderVersion;
- u8 IOCNumber;
- u8 VP_ID;
- u8 VF_ID;
- u16 IOCExceptions;
- u16 IOCStatus;
- u32 IOCLogInfo;
- u8 MaxChainDepth;
- u8 WhoInit;
- u8 NumberOfPorts;
- u8 MaxMSIxVectors;
- u16 RequestCredit;
- u16 ProductID;
- u32 IOCCapabilities;
- union mpi2_version_union FWVersion;
- u16 IOCRequestFrameSize;
- u16 Reserved3;
- u16 MaxInitiators;
- u16 MaxTargets;
- u16 MaxSasExpanders;
- u16 MaxEnclosures;
- u16 ProtocolFlags;
- u16 HighPriorityCredit;
- u16 MaxReplyDescriptorPostQueueDepth;
- u8 ReplyFrameSize;
- u8 MaxVolumes;
- u16 MaxDevHandle;
- u16 MaxPersistentEntries;
- u16 MinDevHandle;
-};
-
-struct mpt2sas_port_facts {
- u8 PortNumber;
- u8 VP_ID;
- u8 VF_ID;
- u8 PortType;
- u16 MaxPostedCmdBuffers;
-};
-
-struct reply_post_struct {
- Mpi2ReplyDescriptorsUnion_t *reply_post_free;
- dma_addr_t reply_post_free_dma;
-};
-
-/**
- * enum mutex_type - task management mutex type
- * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
- * @TM_MUTEX_ON: mutex is required
- */
-enum mutex_type {
- TM_MUTEX_OFF = 0,
- TM_MUTEX_ON = 1,
-};
-
-typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
-/**
- * struct MPT2SAS_ADAPTER - per adapter struct
- * @list: ioc_list
- * @shost: shost object
- * @id: unique adapter id
- * @cpu_count: number online cpus
- * @name: generic ioc string
- * @tmp_string: tmp string used for logging
- * @pdev: pci pdev object
- * @chip: memory mapped register space
- * @chip_phys: physical addrss prior to mapping
- * @logging_level: see mpt2sas_debug.h
- * @fwfault_debug: debuging FW timeouts
- * @ir_firmware: IR firmware present
- * @bars: bitmask of BAR's that must be configured
- * @mask_interrupts: ignore interrupt
- * @dma_mask: used to set the consistent dma mask
- * @fault_reset_work_q_name: fw fault work queue
- * @fault_reset_work_q: ""
- * @fault_reset_work: ""
- * @firmware_event_name: fw event work queue
- * @firmware_event_thread: ""
- * @fw_events_off: flag to turn off fw event handling
- * @fw_event_lock:
- * @fw_event_list: list of fw events
- * @aen_event_read_flag: event log was read
- * @broadcast_aen_busy: broadcast aen waiting to be serviced
- * @shost_recovery: host reset in progress
- * @ioc_reset_in_progress_lock:
- * @ioc_link_reset_in_progress: phy/hard reset in progress
- * @ignore_loginfos: ignore loginfos during task management
- * @remove_host: flag for when driver unloads, to avoid sending dev resets
- * @pci_error_recovery: flag to prevent ioc access until slot reset completes
- * @wait_for_discovery_to_complete: flag set at driver load time when
- * waiting on reporting devices
- * @is_driver_loading: flag set at driver load time
- * @port_enable_failed: flag set when port enable has failed
- * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work
- * @start_scan_failed: means port enable failed, return's the ioc_status
- * @msix_enable: flag indicating msix is enabled
- * @msix_vector_count: number msix vectors
- * @cpu_msix_table: table for mapping cpus to msix index
- * @cpu_msix_table_sz: table size
- * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
- * @scsi_io_cb_idx: shost generated commands
- * @tm_cb_idx: task management commands
- * @scsih_cb_idx: scsih internal commands
- * @transport_cb_idx: transport internal commands
- * @ctl_cb_idx: clt internal commands
- * @base_cb_idx: base internal commands
- * @config_cb_idx: base internal commands
- * @tm_tr_cb_idx : device removal target reset handshake
- * @tm_tr_volume_cb_idx : volume removal target reset
- * @base_cmds:
- * @transport_cmds:
- * @scsih_cmds:
- * @tm_cmds:
- * @ctl_cmds:
- * @config_cmds:
- * @base_add_sg_single: handler for either 32/64 bit sgl's
- * @event_type: bits indicating which events to log
- * @event_context: unique id for each logged event
- * @event_log: event log pointer
- * @event_masks: events that are masked
- * @facts: static facts data
- * @pfacts: static port facts data
- * @manu_pg0: static manufacturing page 0
- * @manu_pg10: static manufacturing page 10
- * @bios_pg2: static bios page 2
- * @bios_pg3: static bios page 3
- * @ioc_pg8: static ioc page 8
- * @iounit_pg0: static iounit page 0
- * @iounit_pg1: static iounit page 1
- * @iounit_pg8: static iounit page 8
- * @sas_hba: sas host object
- * @sas_expander_list: expander object list
- * @sas_node_lock:
- * @sas_device_list: sas device object list
- * @sas_device_init_list: sas device object list (used only at init time)
- * @sas_device_lock:
- * @io_missing_delay: time for IO completed by fw when PDR enabled
- * @device_missing_delay: time for device missing by fw when PDR enabled
- * @sas_id : used for setting volume target IDs
- * @blocking_handles: bitmask used to identify which devices need blocking
- * @pd_handles : bitmask for PD handles
- * @pd_handles_sz : size of pd_handle bitmask
- * @config_page_sz: config page size
- * @config_page: reserve memory for config page payload
- * @config_page_dma:
- * @hba_queue_depth: hba request queue depth
- * @sge_size: sg element size for either 32/64 bit
- * @scsiio_depth: SCSI_IO queue depth
- * @request_sz: per request frame size
- * @request: pool of request frames
- * @request_dma:
- * @request_dma_sz:
- * @scsi_lookup: firmware request tracker list
- * @scsi_lookup_lock:
- * @free_list: free list of request
- * @chain: pool of chains
- * @pending_io_count:
- * @reset_wq:
- * @chain_dma:
- * @max_sges_in_main_message: number sg elements in main message
- * @max_sges_in_chain_message: number sg elements per chain
- * @chains_needed_per_io: max chains per io
- * @chain_offset_value_for_main_message: location 1st sg in main
- * @chain_depth: total chains allocated
- * @hi_priority_smid:
- * @hi_priority:
- * @hi_priority_dma:
- * @hi_priority_depth:
- * @hpr_lookup:
- * @hpr_free_list:
- * @internal_smid:
- * @internal:
- * @internal_dma:
- * @internal_depth:
- * @internal_lookup:
- * @internal_free_list:
- * @sense: pool of sense
- * @sense_dma:
- * @sense_dma_pool:
- * @reply_depth: hba reply queue depth:
- * @reply_sz: per reply frame size:
- * @reply: pool of replys:
- * @reply_dma:
- * @reply_dma_pool:
- * @reply_free_queue_depth: reply free depth
- * @reply_free: pool for reply free queue (32 bit addr)
- * @reply_free_dma:
- * @reply_free_dma_pool:
- * @reply_free_host_index: tail index in pool to insert free replys
- * @reply_post_queue_depth: reply post queue depth
- * @reply_post_struct: struct for reply_post_free physical & virt address
- * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
- * @rdpq_array_enable: rdpq_array support is enabled in the driver
- * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
- * is assigned only ones
- * @reply_queue_count: number of reply queue's
- * @reply_queue_list: link list contaning the reply queue info
- * @reply_post_host_index: head index in the pool where FW completes IO
- * @delayed_tr_list: target reset link list
- * @delayed_tr_volume_list: volume target reset link list
- * @@temp_sensors_count: flag to carry the number of temperature sensors
- * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and
- * pci resource handling. PCI resource freeing will lead to free
- * vital hardware/memory resource, which might be in use by cli/sysfs
- * path functions resulting in Null pointer reference followed by kernel
- * crash. To avoid the above race condition we use mutex syncrhonization
- * which ensures the syncrhonization between cli/sysfs_show path
- */
-struct MPT2SAS_ADAPTER {
- struct list_head list;
- struct Scsi_Host *shost;
- u8 id;
- int cpu_count;
- char name[MPT_NAME_LENGTH];
- char tmp_string[MPT_STRING_LENGTH];
- struct pci_dev *pdev;
- Mpi2SystemInterfaceRegs_t __iomem *chip;
- resource_size_t chip_phys;
- int logging_level;
- int fwfault_debug;
- u8 ir_firmware;
- int bars;
- u8 mask_interrupts;
- int dma_mask;
-
- /* fw fault handler */
- char fault_reset_work_q_name[20];
- struct workqueue_struct *fault_reset_work_q;
- struct delayed_work fault_reset_work;
-
- /* fw event handler */
- char firmware_event_name[20];
- struct workqueue_struct *firmware_event_thread;
- spinlock_t fw_event_lock;
- struct list_head fw_event_list;
-
- /* misc flags */
- int aen_event_read_flag;
- u8 broadcast_aen_busy;
- u16 broadcast_aen_pending;
- u8 shost_recovery;
-
- struct mutex reset_in_progress_mutex;
- spinlock_t ioc_reset_in_progress_lock;
- u8 ioc_link_reset_in_progress;
- u8 ioc_reset_in_progress_status;
-
- u8 ignore_loginfos;
- u8 remove_host;
- u8 pci_error_recovery;
- u8 wait_for_discovery_to_complete;
- struct completion port_enable_done;
- u8 is_driver_loading;
- u8 port_enable_failed;
-
- u8 start_scan;
- u16 start_scan_failed;
-
- u8 msix_enable;
- u16 msix_vector_count;
- u8 *cpu_msix_table;
- resource_size_t __iomem **reply_post_host_index;
- u16 cpu_msix_table_sz;
- u32 ioc_reset_count;
- MPT2SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
- u32 non_operational_loop;
-
- /* internal commands, callback index */
- u8 scsi_io_cb_idx;
- u8 tm_cb_idx;
- u8 transport_cb_idx;
- u8 scsih_cb_idx;
- u8 ctl_cb_idx;
- u8 base_cb_idx;
- u8 port_enable_cb_idx;
- u8 config_cb_idx;
- u8 tm_tr_cb_idx;
- u8 tm_tr_volume_cb_idx;
- u8 tm_sas_control_cb_idx;
- struct _internal_cmd base_cmds;
- struct _internal_cmd port_enable_cmds;
- struct _internal_cmd transport_cmds;
- struct _internal_cmd scsih_cmds;
- struct _internal_cmd tm_cmds;
- struct _internal_cmd ctl_cmds;
- struct _internal_cmd config_cmds;
-
- MPT_ADD_SGE base_add_sg_single;
-
- /* event log */
- u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
- u32 event_context;
- void *event_log;
- u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
-
- /* static config pages */
- struct mpt2sas_facts facts;
- struct mpt2sas_port_facts *pfacts;
- Mpi2ManufacturingPage0_t manu_pg0;
- Mpi2BiosPage2_t bios_pg2;
- Mpi2BiosPage3_t bios_pg3;
- Mpi2IOCPage8_t ioc_pg8;
- Mpi2IOUnitPage0_t iounit_pg0;
- Mpi2IOUnitPage1_t iounit_pg1;
- Mpi2IOUnitPage8_t iounit_pg8;
-
- struct _boot_device req_boot_device;
- struct _boot_device req_alt_boot_device;
- struct _boot_device current_boot_device;
-
- /* sas hba, expander, and device list */
- struct _sas_node sas_hba;
- struct list_head sas_expander_list;
- spinlock_t sas_node_lock;
- struct list_head sas_device_list;
- struct list_head sas_device_init_list;
- spinlock_t sas_device_lock;
- struct list_head raid_device_list;
- spinlock_t raid_device_lock;
- u8 io_missing_delay;
- u16 device_missing_delay;
- int sas_id;
- void *blocking_handles;
- void *pd_handles;
- u16 pd_handles_sz;
-
- /* config page */
- u16 config_page_sz;
- void *config_page;
- dma_addr_t config_page_dma;
-
- /* scsiio request */
- u16 hba_queue_depth;
- u16 sge_size;
- u16 scsiio_depth;
- u16 request_sz;
- u8 *request;
- dma_addr_t request_dma;
- u32 request_dma_sz;
- struct scsiio_tracker *scsi_lookup;
- ulong scsi_lookup_pages;
- spinlock_t scsi_lookup_lock;
- struct list_head free_list;
- int pending_io_count;
- wait_queue_head_t reset_wq;
-
- /* chain */
- struct chain_tracker *chain_lookup;
- struct list_head free_chain_list;
- struct dma_pool *chain_dma_pool;
- ulong chain_pages;
- u16 max_sges_in_main_message;
- u16 max_sges_in_chain_message;
- u16 chains_needed_per_io;
- u16 chain_offset_value_for_main_message;
- u32 chain_depth;
-
- /* hi-priority queue */
- u16 hi_priority_smid;
- u8 *hi_priority;
- dma_addr_t hi_priority_dma;
- u16 hi_priority_depth;
- struct request_tracker *hpr_lookup;
- struct list_head hpr_free_list;
-
- /* internal queue */
- u16 internal_smid;
- u8 *internal;
- dma_addr_t internal_dma;
- u16 internal_depth;
- struct request_tracker *internal_lookup;
- struct list_head internal_free_list;
-
- /* sense */
- u8 *sense;
- dma_addr_t sense_dma;
- struct dma_pool *sense_dma_pool;
-
- /* reply */
- u16 reply_sz;
- u8 *reply;
- dma_addr_t reply_dma;
- u32 reply_dma_max_address;
- u32 reply_dma_min_address;
- struct dma_pool *reply_dma_pool;
-
- /* reply free queue */
- u16 reply_free_queue_depth;
- __le32 *reply_free;
- dma_addr_t reply_free_dma;
- struct dma_pool *reply_free_dma_pool;
- u32 reply_free_host_index;
-
- /* reply post queue */
- u16 reply_post_queue_depth;
- struct reply_post_struct *reply_post;
- u8 rdpq_array_capable;
- u8 rdpq_array_enable;
- u8 rdpq_array_enable_assigned;
- struct dma_pool *reply_post_free_dma_pool;
- u8 reply_queue_count;
- struct list_head reply_queue_list;
-
- struct list_head delayed_tr_list;
- struct list_head delayed_tr_volume_list;
- u8 temp_sensors_count;
-
- /* diag buffer support */
- u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
- u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
- dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT];
- u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT];
- u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT];
- Mpi2ManufacturingPage10_t manu_pg10;
- u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23];
- u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
- u32 ring_buffer_offset;
- u32 ring_buffer_sz;
- u8 is_warpdrive;
- u8 hide_ir_msg;
- u8 mfg_pg10_hide_flag;
- u8 hide_drives;
-
- struct mutex pci_access_mutex;
-};
-
-typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-
-
-/* base shared API */
-extern struct list_head mpt2sas_ioc_list;
-/* spinlock on list operations over IOCs
- * Case: when multiple warpdrive cards(IOCs) are in use
- * Each IOC will added to the ioc list stucture on initialization.
- * Watchdog threads run at regular intervals to check IOC for any
- * fault conditions which will trigger the dead_ioc thread to
- * deallocate pci resource, resulting deleting the IOC netry from list,
- * this deletion need to protected by spinlock to enusre that
- * ioc removal is syncrhonized, if not synchronized it might lead to
- * list_del corruption as the ioc list is traversed in cli path
- */
-extern spinlock_t gioc_lock;
-void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
-
-int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
-int mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc);
-int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
- enum reset_type type);
-
-void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr);
-__le32 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
- u16 smid);
-void mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc);
-
-/* hi-priority queue */
-u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
-u16 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
- struct scsi_cmnd *scmd);
-
-u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
-void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u16 handle);
-void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u16 io_index);
-void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_initialize_callback_handler(void);
-u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func);
-void mpt2sas_base_release_callback_handler(u8 cb_idx);
-
-u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u8 msix_index, u32 reply);
-void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
-
-u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
-
-void mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code);
-int mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
- Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t
- *mpi_request);
-int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
- Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
-void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type);
-
-void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
-
-void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
- u16 device_missing_delay, u8 io_missing_delay);
-
-int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
-
-/* scsih shared API */
-void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
- u32 reply);
-int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle,
- uint channel, uint id, uint lun, u8 type, u16 smid_task,
- ulong timeout, enum mutex_type m_type);
-void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
-void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
-void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-void mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address);
-struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc,
- u16 handle);
-struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER
- *ioc, u64 sas_address);
-struct _sas_device *mpt2sas_get_sdev_by_addr(
- struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-struct _sas_device *__mpt2sas_get_sdev_by_addr(
- struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-
-void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
-
-/* config shared API */
-u8 mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys);
-int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
-int mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage10_t *config_page);
-int mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2BiosPage2_t *config_page);
-int mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2BiosPage3_t *config_page);
-int mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2IOUnitPage0_t *config_page);
-int mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz);
-int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2IOUnitPage1_t *config_page);
-int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2IOUnitPage1_t *config_page);
-int mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page);
-int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
-int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
-int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
-int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2IOCPage8_t *config_page);
-int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle);
-int mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number);
-int mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number);
-int mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 *num_pds);
-int mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz);
-int mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
- u32 form_specific);
-int mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
- u16 *volume_handle);
-int mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle,
- u64 *wwid);
-/* ctl shared API */
-extern struct device_attribute *mpt2sas_host_attrs[];
-extern struct device_attribute *mpt2sas_dev_attrs[];
-void mpt2sas_ctl_init(void);
-void mpt2sas_ctl_exit(void);
-u8 mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
-void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
- u32 reply);
-void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventNotificationReply_t *mpi_reply);
-
-void mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc,
- u8 bits_to_regsiter);
-
-/* transport shared API */
-u8 mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc,
- u16 handle, u64 sas_address);
-void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
- u64 sas_address_parent);
-int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
- *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
-int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
- *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev);
-void mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address, u16 handle, u8 phy_number, u8 link_rate);
-extern struct sas_function_template mpt2sas_transport_functions;
-extern struct scsi_transport_template *mpt2sas_transport_template;
-extern int scsi_internal_device_block(struct scsi_device *sdev);
-extern u8 mpt2sas_stm_zero_smid_handler(struct MPT2SAS_ADAPTER *ioc,
- u8 msix_index, u32 reply);
-extern int scsi_internal_device_unblock(struct scsi_device *sdev,
- enum scsi_device_state new_state);
-
-#endif /* MPT2SAS_BASE_H_INCLUDED */
+++ /dev/null
-/*
- * This module provides common API for accessing firmware configuration pages
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/blkdev.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "mpt2sas_base.h"
-
-/* local definitions */
-
-/* Timeout for config page request (in seconds) */
-#define MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT 15
-
-/* Common sgl flags for READING a config page. */
-#define MPT2_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
- | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT)
-
-/* Common sgl flags for WRITING a config page. */
-#define MPT2_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
- | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \
- << MPI2_SGE_FLAGS_SHIFT)
-
-/**
- * struct config_request - obtain dma memory via routine
- * @sz: size
- * @page: virt pointer
- * @page_dma: phys pointer
- *
- */
-struct config_request{
- u16 sz;
- void *page;
- dma_addr_t page_dma;
-};
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _config_display_some_debug - debug routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @calling_function_name: string pass from calling function
- * @mpi_reply: reply message frame
- * Context: none.
- *
- * Function for displaying debug info helpful when debugging issues
- * in this module.
- */
-static void
-_config_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
-{
- Mpi2ConfigRequest_t *mpi_request;
- char *desc = NULL;
-
- if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
- return;
-
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
- case MPI2_CONFIG_PAGETYPE_IO_UNIT:
- desc = "io_unit";
- break;
- case MPI2_CONFIG_PAGETYPE_IOC:
- desc = "ioc";
- break;
- case MPI2_CONFIG_PAGETYPE_BIOS:
- desc = "bios";
- break;
- case MPI2_CONFIG_PAGETYPE_RAID_VOLUME:
- desc = "raid_volume";
- break;
- case MPI2_CONFIG_PAGETYPE_MANUFACTURING:
- desc = "manufaucturing";
- break;
- case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK:
- desc = "physdisk";
- break;
- case MPI2_CONFIG_PAGETYPE_EXTENDED:
- switch (mpi_request->ExtPageType) {
- case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT:
- desc = "sas_io_unit";
- break;
- case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER:
- desc = "sas_expander";
- break;
- case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE:
- desc = "sas_device";
- break;
- case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY:
- desc = "sas_phy";
- break;
- case MPI2_CONFIG_EXTPAGETYPE_LOG:
- desc = "log";
- break;
- case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE:
- desc = "enclosure";
- break;
- case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG:
- desc = "raid_config";
- break;
- case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
- desc = "driver_mapping";
- break;
- }
- break;
- }
-
- if (!desc)
- return;
-
- printk(MPT2SAS_INFO_FMT "%s: %s(%d), action(%d), form(0x%08x), "
- "smid(%d)\n", ioc->name, calling_function_name, desc,
- mpi_request->Header.PageNumber, mpi_request->Action,
- le32_to_cpu(mpi_request->PageAddress), smid);
-
- if (!mpi_reply)
- return;
-
- if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
- printk(MPT2SAS_INFO_FMT
- "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
- ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo));
-}
-#endif
-
-/**
- * _config_alloc_config_dma_memory - obtain physical memory
- * @ioc: per adapter object
- * @mem: struct config_request
- *
- * A wrapper for obtaining dma-able memory for config page request.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_config_alloc_config_dma_memory(struct MPT2SAS_ADAPTER *ioc,
- struct config_request *mem)
-{
- int r = 0;
-
- if (mem->sz > ioc->config_page_sz) {
- mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz,
- &mem->page_dma, GFP_KERNEL);
- if (!mem->page) {
- printk(MPT2SAS_ERR_FMT "%s: dma_alloc_coherent"
- " failed asking for (%d) bytes!!\n",
- ioc->name, __func__, mem->sz);
- r = -ENOMEM;
- }
- } else { /* use tmp buffer if less than 512 bytes */
- mem->page = ioc->config_page;
- mem->page_dma = ioc->config_page_dma;
- }
- return r;
-}
-
-/**
- * _config_free_config_dma_memory - wrapper to free the memory
- * @ioc: per adapter object
- * @mem: struct config_request
- *
- * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static void
-_config_free_config_dma_memory(struct MPT2SAS_ADAPTER *ioc,
- struct config_request *mem)
-{
- if (mem->sz > ioc->config_page_sz)
- dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page,
- mem->page_dma);
-}
-
-/**
- * mpt2sas_config_done - config page completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: none.
- *
- * The callback handler when using _config_request.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-u8
-mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply)
-{
- MPI2DefaultReply_t *mpi_reply;
-
- if (ioc->config_cmds.status == MPT2_CMD_NOT_USED)
- return 1;
- if (ioc->config_cmds.smid != smid)
- return 1;
- ioc->config_cmds.status |= MPT2_CMD_COMPLETE;
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (mpi_reply) {
- ioc->config_cmds.status |= MPT2_CMD_REPLY_VALID;
- memcpy(ioc->config_cmds.reply, mpi_reply,
- mpi_reply->MsgLength*4);
- }
- ioc->config_cmds.status &= ~MPT2_CMD_PENDING;
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- _config_display_some_debug(ioc, smid, "config_done", mpi_reply);
-#endif
- ioc->config_cmds.smid = USHRT_MAX;
- complete(&ioc->config_cmds.done);
- return 1;
-}
-
-/**
- * _config_request - main routine for sending config page requests
- * @ioc: per adapter object
- * @mpi_request: request message frame
- * @mpi_reply: reply mf payload returned from firmware
- * @timeout: timeout in seconds
- * @config_page: contents of the config page
- * @config_page_sz: size of config page
- * Context: sleep
- *
- * A generic API for config page requests to firmware.
- *
- * The ioc->config_cmds.status flag should be MPT2_CMD_NOT_USED before calling
- * this API.
- *
- * The callback index is set inside `ioc->config_cb_idx.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
- *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout,
- void *config_page, u16 config_page_sz)
-{
- u16 smid;
- u32 ioc_state;
- unsigned long timeleft;
- Mpi2ConfigRequest_t *config_request;
- int r;
- u8 retry_count, issue_host_reset = 0;
- u16 wait_state_count;
- struct config_request mem;
-
- mutex_lock(&ioc->config_cmds.mutex);
- if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n",
- ioc->name, __func__);
- mutex_unlock(&ioc->config_cmds.mutex);
- return -EAGAIN;
- }
-
- retry_count = 0;
- memset(&mem, 0, sizeof(struct config_request));
-
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
-
- if (config_page) {
- mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
- mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
- mpi_request->Header.PageType = mpi_reply->Header.PageType;
- mpi_request->Header.PageLength = mpi_reply->Header.PageLength;
- mpi_request->ExtPageLength = mpi_reply->ExtPageLength;
- mpi_request->ExtPageType = mpi_reply->ExtPageType;
- if (mpi_request->Header.PageLength)
- mem.sz = mpi_request->Header.PageLength * 4;
- else
- mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4;
- r = _config_alloc_config_dma_memory(ioc, &mem);
- if (r != 0)
- goto out;
- if (mpi_request->Action ==
- MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
- mpi_request->Action ==
- MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
- ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
- MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
- mem.page_dma);
- memcpy(mem.page, config_page, min_t(u16, mem.sz,
- config_page_sz));
- } else {
- memset(config_page, 0, config_page_sz);
- ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
- MPT2_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma);
- }
- }
-
- retry_config:
- if (retry_count) {
- if (retry_count > 2) { /* attempt only 2 retries */
- r = -EFAULT;
- goto free_mem;
- }
- printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n",
- ioc->name, __func__, retry_count);
- }
- wait_state_count = 0;
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- if (wait_state_count++ == MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed due to ioc not operational\n",
- ioc->name, __func__);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- r = -EFAULT;
- goto free_mem;
- }
- ssleep(1);
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- printk(MPT2SAS_INFO_FMT "%s: waiting for "
- "operational state(count=%d)\n", ioc->name,
- __func__, wait_state_count);
- }
- if (wait_state_count)
- printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
- ioc->name, __func__);
-
- smid = mpt2sas_base_get_smid(ioc, ioc->config_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- r = -EAGAIN;
- goto free_mem;
- }
-
- r = 0;
- memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t));
- ioc->config_cmds.status = MPT2_CMD_PENDING;
- config_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->config_cmds.smid = smid;
- memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- _config_display_some_debug(ioc, smid, "config_request", NULL);
-#endif
- init_completion(&ioc->config_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
- timeout*HZ);
- if (!(ioc->config_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2ConfigRequest_t)/4);
- retry_count++;
- if (ioc->config_cmds.smid == smid)
- mpt2sas_base_free_smid(ioc, smid);
- if ((ioc->shost_recovery) || (ioc->config_cmds.status &
- MPT2_CMD_RESET) || ioc->pci_error_recovery)
- goto retry_config;
- issue_host_reset = 1;
- r = -EFAULT;
- goto free_mem;
- }
-
- if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID)
- memcpy(mpi_reply, ioc->config_cmds.reply,
- sizeof(Mpi2ConfigReply_t));
- if (retry_count)
- printk(MPT2SAS_INFO_FMT "%s: retry (%d) completed!!\n",
- ioc->name, __func__, retry_count);
- if (config_page && mpi_request->Action ==
- MPI2_CONFIG_ACTION_PAGE_READ_CURRENT)
- memcpy(config_page, mem.page, min_t(u16, mem.sz,
- config_page_sz));
- free_mem:
- if (config_page)
- _config_free_config_dma_memory(ioc, &mem);
- out:
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- mutex_unlock(&ioc->config_cmds.mutex);
-
- if (issue_host_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- return r;
-}
-
-/**
- * mpt2sas_config_get_manufacturing_pg0 - obtain manufacturing page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_manufacturing_pg10 - obtain manufacturing page 10
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage10_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
- mpi_request.Header.PageNumber = 10;
- mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_bios_pg2 - obtain bios page 2
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
- mpi_request.Header.PageNumber = 2;
- mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_bios_pg3 - obtain bios page 3
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2BiosPage3_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
- mpi_request.Header.PageNumber = 3;
- mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_iounit_pg0 - obtain iounit page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_iounit_pg1 - obtain iounit page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
- mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_set_iounit_pg1 - set iounit page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
- mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_iounit_pg3 - obtain iounit page 3
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
- mpi_request.Header.PageNumber = 3;
- mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_iounit_pg8 - obtain iounit page 8
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
- mpi_request.Header.PageNumber = 8;
- mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_ioc_pg8 - obtain ioc page 8
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
- mpi_request.Header.PageNumber = 8;
- mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_sas_device_pg0 - obtain sas device page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: device handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
- mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
- mpi_request.Header.PageNumber = 0;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress = cpu_to_le32(form | handle);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_sas_device_pg1 - obtain sas device page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: device handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
- mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION;
- mpi_request.Header.PageNumber = 1;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress = cpu_to_le32(form | handle);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_number_hba_phys - obtain number of phys on the host
- * @ioc: per adapter object
- * @num_phys: pointer returned with the number of phys
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
- u16 ioc_status;
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasIOUnitPage0_t config_page;
-
- *num_phys = 0;
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, &mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, &mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
- sizeof(Mpi2SasIOUnitPage0_t));
- if (!r) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
- *num_phys = config_page.NumPhys;
- }
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Calling function should call config_get_number_hba_phys prior to
- * this function, so enough memory is allocated for config_page.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Calling function should call config_get_number_hba_phys prior to
- * this function, so enough memory is allocated for config_page.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
- mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_set_sas_iounit_pg1 - send sas iounit page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Calling function should call config_get_number_hba_phys prior to
- * this function, so enough memory is allocated for config_page.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
- mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_expander_pg0 - obtain expander page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: expander handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress = cpu_to_le32(form | handle);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_expander_pg1 - obtain expander page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @phy_number: phy number
- * @handle: expander handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number,
- u16 handle)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
- mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress =
- cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM |
- (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_enclosure_pg0 - obtain enclosure page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: expander handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress = cpu_to_le32(form | handle);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_phy_pg0 - obtain phy page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @phy_number: phy number
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress =
- cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_phy_pg1 - obtain phy page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @phy_number: phy number
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
- mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress =
- cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_raid_volume_pg1 - obtain raid volume page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: volume handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
- u32 handle)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
- mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress = cpu_to_le32(form | handle);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_number_pds - obtain number of phys disk assigned to volume
- * @ioc: per adapter object
- * @handle: volume handle
- * @num_pds: returns pds count
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle,
- u8 *num_pds)
-{
- Mpi2ConfigRequest_t mpi_request;
- Mpi2RaidVolPage0_t config_page;
- Mpi2ConfigReply_t mpi_reply;
- int r;
- u16 ioc_status;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- *num_pds = 0;
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, &mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress =
- cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, &mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
- sizeof(Mpi2RaidVolPage0_t));
- if (!r) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
- *num_pds = config_page.NumPhysDisks;
- }
-
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_raid_volume_pg0 - obtain raid volume page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: volume handle
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
- u32 handle, u16 sz)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress = cpu_to_le32(form | handle);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_phys_disk_pg0 - obtain phys disk page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE
- * @form_specific: specific to the form
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
- u32 form_specific)
-{
- Mpi2ConfigRequest_t mpi_request;
- int r;
-
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
- mpi_request.Header.PageNumber = 0;
- mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.PageAddress = cpu_to_le32(form | form_specific);
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
- out:
- return r;
-}
-
-/**
- * mpt2sas_config_get_volume_handle - returns volume handle for give hidden raid components
- * @ioc: per adapter object
- * @pd_handle: phys disk handle
- * @volume_handle: volume handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
- u16 *volume_handle)
-{
- Mpi2RaidConfigurationPage0_t *config_page = NULL;
- Mpi2ConfigRequest_t mpi_request;
- Mpi2ConfigReply_t mpi_reply;
- int r, i, config_page_sz;
- u16 ioc_status;
- int config_num;
- u16 element_type;
- u16 phys_disk_dev_handle;
-
- *volume_handle = 0;
- memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
- mpi_request.Function = MPI2_FUNCTION_CONFIG;
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
- mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
- mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG;
- mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION;
- mpi_request.Header.PageNumber = 0;
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
- r = _config_request(ioc, &mpi_request, &mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
- if (r)
- goto out;
-
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
- config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
- config_page = kmalloc(config_page_sz, GFP_KERNEL);
- if (!config_page) {
- r = -1;
- goto out;
- }
- config_num = 0xff;
- while (1) {
- mpi_request.PageAddress = cpu_to_le32(config_num +
- MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
- r = _config_request(ioc, &mpi_request, &mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- config_page_sz);
- if (r)
- goto out;
- r = -1;
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- goto out;
- for (i = 0; i < config_page->NumElements; i++) {
- element_type = le16_to_cpu(config_page->
- ConfigElement[i].ElementFlags) &
- MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
- if (element_type ==
- MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
- element_type ==
- MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
- phys_disk_dev_handle =
- le16_to_cpu(config_page->ConfigElement[i].
- PhysDiskDevHandle);
- if (phys_disk_dev_handle == pd_handle) {
- *volume_handle =
- le16_to_cpu(config_page->
- ConfigElement[i].VolDevHandle);
- r = 0;
- goto out;
- }
- } else if (element_type ==
- MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
- *volume_handle = 0;
- r = 0;
- goto out;
- }
- }
- config_num = config_page->ConfigNum;
- }
- out:
- kfree(config_page);
- return r;
-}
-
-/**
- * mpt2sas_config_get_volume_wwid - returns wwid given the volume handle
- * @ioc: per adapter object
- * @volume_handle: volume handle
- * @wwid: volume wwid
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle,
- u64 *wwid)
-{
- Mpi2ConfigReply_t mpi_reply;
- Mpi2RaidVolPage1_t raid_vol_pg1;
-
- *wwid = 0;
- if (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
- &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE,
- volume_handle))) {
- *wwid = le64_to_cpu(raid_vol_pg1.WWID);
- return 0;
- } else
- return -1;
-}
+++ /dev/null
-/*
- * Management Module Support for MPT (Message Passing Technology) based
- * controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/compat.h>
-#include <linux/poll.h>
-
-#include <linux/io.h>
-#include <linux/uaccess.h>
-
-#include "mpt2sas_base.h"
-#include "mpt2sas_ctl.h"
-
-static DEFINE_MUTEX(_ctl_mutex);
-static struct fasync_struct *async_queue;
-static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
-
-static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
- u8 *issue_reset);
-
-/**
- * enum block_state - blocking state
- * @NON_BLOCKING: non blocking
- * @BLOCKING: blocking
- *
- * These states are for ioctls that need to wait for a response
- * from firmware, so they probably require sleep.
- */
-enum block_state {
- NON_BLOCKING,
- BLOCKING,
-};
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _ctl_sas_device_find_by_handle - sas device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for sas_device based on sas_address, then return sas_device
- * object.
- */
-static struct _sas_device *
-_ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_device *sas_device, *r;
-
- r = NULL;
- list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
- if (sas_device->handle != handle)
- continue;
- r = sas_device;
- goto out;
- }
-
- out:
- return r;
-}
-
-/**
- * _ctl_display_some_debug - debug routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @calling_function_name: string pass from calling function
- * @mpi_reply: reply message frame
- * Context: none.
- *
- * Function for displaying debug info helpful when debugging issues
- * in this module.
- */
-static void
-_ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
-{
- Mpi2ConfigRequest_t *mpi_request;
- char *desc = NULL;
-
- if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
- return;
-
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- switch (mpi_request->Function) {
- case MPI2_FUNCTION_SCSI_IO_REQUEST:
- {
- Mpi2SCSIIORequest_t *scsi_request =
- (Mpi2SCSIIORequest_t *)mpi_request;
-
- snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
- "scsi_io, cmd(0x%02x), cdb_len(%d)",
- scsi_request->CDB.CDB32[0],
- le16_to_cpu(scsi_request->IoFlags) & 0xF);
- desc = ioc->tmp_string;
- break;
- }
- case MPI2_FUNCTION_SCSI_TASK_MGMT:
- desc = "task_mgmt";
- break;
- case MPI2_FUNCTION_IOC_INIT:
- desc = "ioc_init";
- break;
- case MPI2_FUNCTION_IOC_FACTS:
- desc = "ioc_facts";
- break;
- case MPI2_FUNCTION_CONFIG:
- {
- Mpi2ConfigRequest_t *config_request =
- (Mpi2ConfigRequest_t *)mpi_request;
-
- snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
- "config, type(0x%02x), ext_type(0x%02x), number(%d)",
- (config_request->Header.PageType &
- MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
- config_request->Header.PageNumber);
- desc = ioc->tmp_string;
- break;
- }
- case MPI2_FUNCTION_PORT_FACTS:
- desc = "port_facts";
- break;
- case MPI2_FUNCTION_PORT_ENABLE:
- desc = "port_enable";
- break;
- case MPI2_FUNCTION_EVENT_NOTIFICATION:
- desc = "event_notification";
- break;
- case MPI2_FUNCTION_FW_DOWNLOAD:
- desc = "fw_download";
- break;
- case MPI2_FUNCTION_FW_UPLOAD:
- desc = "fw_upload";
- break;
- case MPI2_FUNCTION_RAID_ACTION:
- desc = "raid_action";
- break;
- case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
- {
- Mpi2SCSIIORequest_t *scsi_request =
- (Mpi2SCSIIORequest_t *)mpi_request;
-
- snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
- "raid_pass, cmd(0x%02x), cdb_len(%d)",
- scsi_request->CDB.CDB32[0],
- le16_to_cpu(scsi_request->IoFlags) & 0xF);
- desc = ioc->tmp_string;
- break;
- }
- case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
- desc = "sas_iounit_cntl";
- break;
- case MPI2_FUNCTION_SATA_PASSTHROUGH:
- desc = "sata_pass";
- break;
- case MPI2_FUNCTION_DIAG_BUFFER_POST:
- desc = "diag_buffer_post";
- break;
- case MPI2_FUNCTION_DIAG_RELEASE:
- desc = "diag_release";
- break;
- case MPI2_FUNCTION_SMP_PASSTHROUGH:
- desc = "smp_passthrough";
- break;
- }
-
- if (!desc)
- return;
-
- printk(MPT2SAS_INFO_FMT "%s: %s, smid(%d)\n",
- ioc->name, calling_function_name, desc, smid);
-
- if (!mpi_reply)
- return;
-
- if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
- printk(MPT2SAS_INFO_FMT
- "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
- ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo));
-
- if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
- mpi_request->Function ==
- MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
- Mpi2SCSIIOReply_t *scsi_reply =
- (Mpi2SCSIIOReply_t *)mpi_reply;
- struct _sas_device *sas_device = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _ctl_sas_device_find_by_handle(ioc,
- le16_to_cpu(scsi_reply->DevHandle));
- if (sas_device) {
- printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), "
- "phy(%d)\n", ioc->name, (unsigned long long)
- sas_device->sas_address, sas_device->phy);
- printk(MPT2SAS_WARN_FMT
- "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
- ioc->name, sas_device->enclosure_logical_id,
- sas_device->slot);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
- printk(MPT2SAS_INFO_FMT
- "\tscsi_state(0x%02x), scsi_status"
- "(0x%02x)\n", ioc->name,
- scsi_reply->SCSIState,
- scsi_reply->SCSIStatus);
- }
-}
-#endif
-
-/**
- * mpt2sas_ctl_done - ctl module completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: none.
- *
- * The callback handler when using ioc->ctl_cb_idx.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-u8
-mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply)
-{
- MPI2DefaultReply_t *mpi_reply;
- Mpi2SCSIIOReply_t *scsiio_reply;
- const void *sense_data;
- u32 sz;
-
- if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED)
- return 1;
- if (ioc->ctl_cmds.smid != smid)
- return 1;
- ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE;
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (mpi_reply) {
- memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
- ioc->ctl_cmds.status |= MPT2_CMD_REPLY_VALID;
- /* get sense data */
- if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
- mpi_reply->Function ==
- MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
- scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply;
- if (scsiio_reply->SCSIState &
- MPI2_SCSI_STATE_AUTOSENSE_VALID) {
- sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
- le32_to_cpu(scsiio_reply->SenseCount));
- sense_data = mpt2sas_base_get_sense_buffer(ioc,
- smid);
- memcpy(ioc->ctl_cmds.sense, sense_data, sz);
- }
- }
- }
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- _ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
-#endif
- ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING;
- complete(&ioc->ctl_cmds.done);
- return 1;
-}
-
-/**
- * _ctl_check_event_type - determines when an event needs logging
- * @ioc: per adapter object
- * @event: firmware event
- *
- * The bitmask in ioc->event_type[] indicates which events should be
- * be saved in the driver event_log. This bitmask is set by application.
- *
- * Returns 1 when event should be captured, or zero means no match.
- */
-static int
-_ctl_check_event_type(struct MPT2SAS_ADAPTER *ioc, u16 event)
-{
- u16 i;
- u32 desired_event;
-
- if (event >= 128 || !event || !ioc->event_log)
- return 0;
-
- desired_event = (1 << (event % 32));
- if (!desired_event)
- desired_event = 1;
- i = event / 32;
- return desired_event & ioc->event_type[i];
-}
-
-/**
- * mpt2sas_ctl_add_to_event_log - add event
- * @ioc: per adapter object
- * @mpi_reply: reply message frame
- *
- * Return nothing.
- */
-void
-mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventNotificationReply_t *mpi_reply)
-{
- struct MPT2_IOCTL_EVENTS *event_log;
- u16 event;
- int i;
- u32 sz, event_data_sz;
- u8 send_aen = 0;
-
- if (!ioc->event_log)
- return;
-
- event = le16_to_cpu(mpi_reply->Event);
-
- if (_ctl_check_event_type(ioc, event)) {
-
- /* insert entry into circular event_log */
- i = ioc->event_context % MPT2SAS_CTL_EVENT_LOG_SIZE;
- event_log = ioc->event_log;
- event_log[i].event = event;
- event_log[i].context = ioc->event_context++;
-
- event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
- sz = min_t(u32, event_data_sz, MPT2_EVENT_DATA_SIZE);
- memset(event_log[i].data, 0, MPT2_EVENT_DATA_SIZE);
- memcpy(event_log[i].data, mpi_reply->EventData, sz);
- send_aen = 1;
- }
-
- /* This aen_event_read_flag flag is set until the
- * application has read the event log.
- * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
- */
- if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
- (send_aen && !ioc->aen_event_read_flag)) {
- ioc->aen_event_read_flag = 1;
- wake_up_interruptible(&ctl_poll_wait);
- if (async_queue)
- kill_fasync(&async_queue, SIGIO, POLL_IN);
- }
-}
-
-/**
- * mpt2sas_ctl_event_callback - firmware event handler (called at ISR time)
- * @ioc: per adapter object
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt.
- *
- * This function merely adds a new work task into ioc->firmware_event_thread.
- * The tasks are worked from _firmware_event_work in user context.
- *
- * Returns void.
- */
-void
-mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
- u32 reply)
-{
- Mpi2EventNotificationReply_t *mpi_reply;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (unlikely(!mpi_reply)) {
- printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
- mpt2sas_ctl_add_to_event_log(ioc, mpi_reply);
- return;
-}
-
-/**
- * _ctl_verify_adapter - validates ioc_number passed from application
- * @ioc: per adapter object
- * @iocpp: The ioc pointer is returned in this.
- *
- * Return (-1) means error, else ioc_number.
- */
-static int
-_ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp)
-{
- struct MPT2SAS_ADAPTER *ioc;
- /* global ioc lock to protect controller on list operations */
- spin_lock(&gioc_lock);
- list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
- if (ioc->id != ioc_number)
- continue;
- spin_unlock(&gioc_lock);
- *iocpp = ioc;
- return ioc_number;
- }
- spin_unlock(&gioc_lock);
- *iocpp = NULL;
- return -1;
-}
-
-/**
- * mpt2sas_ctl_reset_handler - reset callback handler (for ctl)
- * @ioc: per adapter object
- * @reset_phase: phase
- *
- * The handler for doing any required cleanup or initialization.
- *
- * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
- * MPT2_IOC_DONE_RESET
- */
-void
-mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
-{
- int i;
- u8 issue_reset;
-
- switch (reset_phase) {
- case MPT2_IOC_PRE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
- for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
- if (!(ioc->diag_buffer_status[i] &
- MPT2_DIAG_BUFFER_IS_REGISTERED))
- continue;
- if ((ioc->diag_buffer_status[i] &
- MPT2_DIAG_BUFFER_IS_RELEASED))
- continue;
- _ctl_send_release(ioc, i, &issue_reset);
- }
- break;
- case MPT2_IOC_AFTER_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
- if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) {
- ioc->ctl_cmds.status |= MPT2_CMD_RESET;
- mpt2sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
- complete(&ioc->ctl_cmds.done);
- }
- break;
- case MPT2_IOC_DONE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
-
- for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
- if (!(ioc->diag_buffer_status[i] &
- MPT2_DIAG_BUFFER_IS_REGISTERED))
- continue;
- if ((ioc->diag_buffer_status[i] &
- MPT2_DIAG_BUFFER_IS_RELEASED))
- continue;
- ioc->diag_buffer_status[i] |=
- MPT2_DIAG_BUFFER_IS_DIAG_RESET;
- }
- break;
- }
-}
-
-/**
- * _ctl_fasync -
- * @fd -
- * @filep -
- * @mode -
- *
- * Called when application request fasyn callback handler.
- */
-static int
-_ctl_fasync(int fd, struct file *filep, int mode)
-{
- return fasync_helper(fd, filep, mode, &async_queue);
-}
-
-/**
- * _ctl_poll -
- * @file -
- * @wait -
- *
- */
-static unsigned int
-_ctl_poll(struct file *filep, poll_table *wait)
-{
- struct MPT2SAS_ADAPTER *ioc;
-
- poll_wait(filep, &ctl_poll_wait, wait);
-
- /* global ioc lock to protect controller on list operations */
- spin_lock(&gioc_lock);
- list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
- if (ioc->aen_event_read_flag) {
- spin_unlock(&gioc_lock);
- return POLLIN | POLLRDNORM;
- }
- }
- spin_unlock(&gioc_lock);
- return 0;
-}
-
-/**
- * _ctl_set_task_mid - assign an active smid to tm request
- * @ioc: per adapter object
- * @karg - (struct mpt2_ioctl_command)
- * @tm_request - pointer to mf from user space
- *
- * Returns 0 when an smid if found, else fail.
- * during failure, the reply frame is filled.
- */
-static int
-_ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
- Mpi2SCSITaskManagementRequest_t *tm_request)
-{
- u8 found = 0;
- u16 i;
- u16 handle;
- struct scsi_cmnd *scmd;
- struct MPT2SAS_DEVICE *priv_data;
- unsigned long flags;
- Mpi2SCSITaskManagementReply_t *tm_reply;
- u32 sz;
- u32 lun;
- char *desc = NULL;
-
- if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
- desc = "abort_task";
- else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
- desc = "query_task";
- else
- return 0;
-
- lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
-
- handle = le16_to_cpu(tm_request->DevHandle);
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- for (i = ioc->scsiio_depth; i && !found; i--) {
- scmd = ioc->scsi_lookup[i - 1].scmd;
- if (scmd == NULL || scmd->device == NULL ||
- scmd->device->hostdata == NULL)
- continue;
- if (lun != scmd->device->lun)
- continue;
- priv_data = scmd->device->hostdata;
- if (priv_data->sas_target == NULL)
- continue;
- if (priv_data->sas_target->handle != handle)
- continue;
- tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid);
- found = 1;
- }
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
- if (!found) {
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
- desc, le16_to_cpu(tm_request->DevHandle), lun));
- tm_reply = ioc->ctl_cmds.reply;
- tm_reply->DevHandle = tm_request->DevHandle;
- tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
- tm_reply->TaskType = tm_request->TaskType;
- tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
- tm_reply->VP_ID = tm_request->VP_ID;
- tm_reply->VF_ID = tm_request->VF_ID;
- sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
- if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
- sz))
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- return 1;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
- desc, le16_to_cpu(tm_request->DevHandle), lun,
- le16_to_cpu(tm_request->TaskMID)));
- return 0;
-}
-
-/**
- * _ctl_do_mpt_command - main handler for MPT2COMMAND opcode
- * @ioc: per adapter object
- * @karg - (struct mpt2_ioctl_command)
- * @mf - pointer to mf in user space
- */
-static long
-_ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command karg,
- void __user *mf)
-{
- MPI2RequestHeader_t *mpi_request = NULL, *request;
- MPI2DefaultReply_t *mpi_reply;
- u32 ioc_state;
- u16 ioc_status;
- u16 smid;
- unsigned long timeout, timeleft;
- u8 issue_reset;
- u32 sz;
- void *psge;
- void *data_out = NULL;
- dma_addr_t data_out_dma;
- size_t data_out_sz = 0;
- void *data_in = NULL;
- dma_addr_t data_in_dma;
- size_t data_in_sz = 0;
- u32 sgl_flags;
- long ret;
- u16 wait_state_count;
-
- issue_reset = 0;
-
- if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
- ioc->name, __func__);
- ret = -EAGAIN;
- goto out;
- }
-
- wait_state_count = 0;
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- if (wait_state_count++ == 10) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed due to ioc not operational\n",
- ioc->name, __func__);
- ret = -EFAULT;
- goto out;
- }
- ssleep(1);
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- printk(MPT2SAS_INFO_FMT "%s: waiting for "
- "operational state(count=%d)\n", ioc->name,
- __func__, wait_state_count);
- }
- if (wait_state_count)
- printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
- ioc->name, __func__);
-
- mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
- if (!mpi_request) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a memory for "
- "mpi_request\n", ioc->name, __func__);
- ret = -ENOMEM;
- goto out;
- }
-
- /* Check for overflow and wraparound */
- if (karg.data_sge_offset * 4 > ioc->request_sz ||
- karg.data_sge_offset > (UINT_MAX / 4)) {
- ret = -EINVAL;
- goto out;
- }
-
- /* copy in request message frame from user */
- if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__,
- __func__);
- ret = -EFAULT;
- goto out;
- }
-
- if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
- smid = mpt2sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- ret = -EAGAIN;
- goto out;
- }
- } else {
-
- smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- ret = -EAGAIN;
- goto out;
- }
- }
-
- ret = 0;
- ioc->ctl_cmds.status = MPT2_CMD_PENDING;
- memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
- request = mpt2sas_base_get_msg_frame(ioc, smid);
- memcpy(request, mpi_request, karg.data_sge_offset*4);
- ioc->ctl_cmds.smid = smid;
- data_out_sz = karg.data_out_size;
- data_in_sz = karg.data_in_size;
-
- if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
- mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
- if (!le16_to_cpu(mpi_request->FunctionDependent1) ||
- le16_to_cpu(mpi_request->FunctionDependent1) >
- ioc->facts.MaxDevHandle) {
- ret = -EINVAL;
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
- }
-
- /* obtain dma-able memory for data transfer */
- if (data_out_sz) /* WRITE */ {
- data_out = pci_alloc_consistent(ioc->pdev, data_out_sz,
- &data_out_dma);
- if (!data_out) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- ret = -ENOMEM;
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
- if (copy_from_user(data_out, karg.data_out_buf_ptr,
- data_out_sz)) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- ret = -EFAULT;
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
- }
-
- if (data_in_sz) /* READ */ {
- data_in = pci_alloc_consistent(ioc->pdev, data_in_sz,
- &data_in_dma);
- if (!data_in) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- ret = -ENOMEM;
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
- }
-
- /* add scatter gather elements */
- psge = (void *)request + (karg.data_sge_offset*4);
-
- if (!data_out_sz && !data_in_sz) {
- mpt2sas_base_build_zero_len_sge(ioc, psge);
- } else if (data_out_sz && data_in_sz) {
- /* WRITE sgel first */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- data_out_sz, data_out_dma);
-
- /* incr sgel */
- psge += ioc->sge_size;
-
- /* READ sgel last */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
- MPI2_SGE_FLAGS_END_OF_LIST);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- data_in_sz, data_in_dma);
- } else if (data_out_sz) /* WRITE */ {
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
- MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- data_out_sz, data_out_dma);
- } else if (data_in_sz) /* READ */ {
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
- MPI2_SGE_FLAGS_END_OF_LIST);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- data_in_sz, data_in_dma);
- }
-
- /* send command to firmware */
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- _ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
-#endif
-
- init_completion(&ioc->ctl_cmds.done);
- switch (mpi_request->Function) {
- case MPI2_FUNCTION_SCSI_IO_REQUEST:
- case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
- {
- Mpi2SCSIIORequest_t *scsiio_request =
- (Mpi2SCSIIORequest_t *)request;
- scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
- scsiio_request->SenseBufferLowAddress =
- mpt2sas_base_get_sense_buffer_dma(ioc, smid);
- memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE);
- if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
- mpt2sas_base_put_smid_scsi_io(ioc, smid,
- le16_to_cpu(mpi_request->FunctionDependent1));
- else
- mpt2sas_base_put_smid_default(ioc, smid);
- break;
- }
- case MPI2_FUNCTION_SCSI_TASK_MGMT:
- {
- Mpi2SCSITaskManagementRequest_t *tm_request =
- (Mpi2SCSITaskManagementRequest_t *)request;
-
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "TASK_MGMT: "
- "handle(0x%04x), task_type(0x%02x)\n", ioc->name,
- le16_to_cpu(tm_request->DevHandle), tm_request->TaskType));
-
- if (tm_request->TaskType ==
- MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
- tm_request->TaskType ==
- MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
- if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
- }
-
- mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu(
- tm_request->DevHandle));
- mpt2sas_base_put_smid_hi_priority(ioc, smid);
- break;
- }
- case MPI2_FUNCTION_SMP_PASSTHROUGH:
- {
- Mpi2SmpPassthroughRequest_t *smp_request =
- (Mpi2SmpPassthroughRequest_t *)mpi_request;
- u8 *data;
-
- /* ioc determines which port to use */
- smp_request->PhysicalPort = 0xFF;
- if (smp_request->PassthroughFlags &
- MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
- data = (u8 *)&smp_request->SGL;
- else {
- if (unlikely(data_out == NULL)) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- mpt2sas_base_free_smid(ioc, smid);
- ret = -EINVAL;
- goto out;
- }
- data = data_out;
- }
-
- if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
- ioc->ioc_link_reset_in_progress = 1;
- ioc->ignore_loginfos = 1;
- }
- mpt2sas_base_put_smid_default(ioc, smid);
- break;
- }
- case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
- {
- Mpi2SasIoUnitControlRequest_t *sasiounit_request =
- (Mpi2SasIoUnitControlRequest_t *)mpi_request;
-
- if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
- || sasiounit_request->Operation ==
- MPI2_SAS_OP_PHY_LINK_RESET) {
- ioc->ioc_link_reset_in_progress = 1;
- ioc->ignore_loginfos = 1;
- }
- mpt2sas_base_put_smid_default(ioc, smid);
- break;
- }
- default:
- mpt2sas_base_put_smid_default(ioc, smid);
- break;
- }
-
- if (karg.timeout < MPT2_IOCTL_DEFAULT_TIMEOUT)
- timeout = MPT2_IOCTL_DEFAULT_TIMEOUT;
- else
- timeout = karg.timeout;
- timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
- timeout*HZ);
- if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
- Mpi2SCSITaskManagementRequest_t *tm_request =
- (Mpi2SCSITaskManagementRequest_t *)mpi_request;
- mpt2sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
- tm_request->DevHandle));
- } else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
- mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
- ioc->ioc_link_reset_in_progress) {
- ioc->ioc_link_reset_in_progress = 0;
- ioc->ignore_loginfos = 0;
- }
- if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
- __func__);
- _debug_dump_mf(mpi_request, karg.data_sge_offset);
- if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
- }
-
- mpi_reply = ioc->ctl_cmds.reply;
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
- (ioc->logging_level & MPT_DEBUG_TM)) {
- Mpi2SCSITaskManagementReply_t *tm_reply =
- (Mpi2SCSITaskManagementReply_t *)mpi_reply;
-
- printk(MPT2SAS_INFO_FMT "TASK_MGMT: "
- "IOCStatus(0x%04x), IOCLogInfo(0x%08x), "
- "TerminationCount(0x%08x)\n", ioc->name,
- le16_to_cpu(tm_reply->IOCStatus),
- le32_to_cpu(tm_reply->IOCLogInfo),
- le32_to_cpu(tm_reply->TerminationCount));
- }
-#endif
- /* copy out xdata to user */
- if (data_in_sz) {
- if (copy_to_user(karg.data_in_buf_ptr, data_in,
- data_in_sz)) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- ret = -ENODATA;
- goto out;
- }
- }
-
- /* copy out reply message frame to user */
- if (karg.max_reply_bytes) {
- sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
- if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
- sz)) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- ret = -ENODATA;
- goto out;
- }
- }
-
- /* copy out sense to user */
- if (karg.max_sense_bytes && (mpi_request->Function ==
- MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
- MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
- sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE);
- if (copy_to_user(karg.sense_data_ptr,
- ioc->ctl_cmds.sense, sz)) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- ret = -ENODATA;
- goto out;
- }
- }
-
- issue_host_reset:
- if (issue_reset) {
- ret = -ENODATA;
- if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
- mpi_request->Function ==
- MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
- mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) {
- printk(MPT2SAS_INFO_FMT "issue target reset: handle "
- "= (0x%04x)\n", ioc->name,
- le16_to_cpu(mpi_request->FunctionDependent1));
- mpt2sas_halt_firmware(ioc);
- mpt2sas_scsih_issue_tm(ioc,
- le16_to_cpu(mpi_request->FunctionDependent1), 0, 0,
- 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10,
- TM_MUTEX_ON);
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
- } else
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- }
-
- out:
-
- /* free memory associated with sg buffers */
- if (data_in)
- pci_free_consistent(ioc->pdev, data_in_sz, data_in,
- data_in_dma);
-
- if (data_out)
- pci_free_consistent(ioc->pdev, data_out_sz, data_out,
- data_out_dma);
-
- kfree(mpi_request);
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
- return ret;
-}
-
-/**
- * _ctl_getiocinfo - main handler for MPT2IOCINFO opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_getiocinfo(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_ioctl_iocinfo karg;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
- __func__));
-
- memset(&karg, 0 , sizeof(karg));
- if (ioc->is_warpdrive)
- karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
- else
- karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
- if (ioc->pfacts)
- karg.port_number = ioc->pfacts[0].PortNumber;
- karg.hw_rev = ioc->pdev->revision;
- karg.pci_id = ioc->pdev->device;
- karg.subsystem_device = ioc->pdev->subsystem_device;
- karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
- karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
- karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
- karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
- karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
- karg.firmware_version = ioc->facts.FWVersion.Word;
- strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
- strcat(karg.driver_version, "-");
- strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
- karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
-
- if (copy_to_user(arg, &karg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
- return 0;
-}
-
-/**
- * _ctl_eventquery - main handler for MPT2EVENTQUERY opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_eventquery(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_ioctl_eventquery karg;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
- __func__));
-
- karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE;
- memcpy(karg.event_types, ioc->event_type,
- MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
-
- if (copy_to_user(arg, &karg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
- return 0;
-}
-
-/**
- * _ctl_eventenable - main handler for MPT2EVENTENABLE opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_eventenable(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_ioctl_eventenable karg;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
- __func__));
-
- if (ioc->event_log)
- return 0;
- memcpy(ioc->event_type, karg.event_types,
- MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
- mpt2sas_base_validate_event_type(ioc, ioc->event_type);
-
- /* initialize event_log */
- ioc->event_context = 0;
- ioc->aen_event_read_flag = 0;
- ioc->event_log = kcalloc(MPT2SAS_CTL_EVENT_LOG_SIZE,
- sizeof(struct MPT2_IOCTL_EVENTS), GFP_KERNEL);
- if (!ioc->event_log) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -ENOMEM;
- }
- return 0;
-}
-
-/**
- * _ctl_eventreport - main handler for MPT2EVENTREPORT opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_eventreport(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_ioctl_eventreport karg;
- u32 number_bytes, max_events, max;
- struct mpt2_ioctl_eventreport __user *uarg = arg;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
- __func__));
-
- number_bytes = karg.hdr.max_data_size -
- sizeof(struct mpt2_ioctl_header);
- max_events = number_bytes/sizeof(struct MPT2_IOCTL_EVENTS);
- max = min_t(u32, MPT2SAS_CTL_EVENT_LOG_SIZE, max_events);
-
- /* If fewer than 1 event is requested, there must have
- * been some type of error.
- */
- if (!max || !ioc->event_log)
- return -ENODATA;
-
- number_bytes = max * sizeof(struct MPT2_IOCTL_EVENTS);
- if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- /* reset flag so SIGIO can restart */
- ioc->aen_event_read_flag = 0;
- return 0;
-}
-
-/**
- * _ctl_do_reset - main handler for MPT2HARDRESET opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_do_reset(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_ioctl_diag_reset karg;
- int retval;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- if (ioc->shost_recovery || ioc->pci_error_recovery ||
- ioc->is_driver_loading)
- return -EAGAIN;
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
- __func__));
-
- retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- printk(MPT2SAS_INFO_FMT "host reset: %s\n",
- ioc->name, ((!retval) ? "SUCCESS" : "FAILED"));
- return 0;
-}
-
-/**
- * _ctl_btdh_search_sas_device - searching for sas device
- * @ioc: per adapter object
- * @btdh: btdh ioctl payload
- */
-static int
-_ctl_btdh_search_sas_device(struct MPT2SAS_ADAPTER *ioc,
- struct mpt2_ioctl_btdh_mapping *btdh)
-{
- struct _sas_device *sas_device;
- unsigned long flags;
- int rc = 0;
-
- if (list_empty(&ioc->sas_device_list))
- return rc;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
- if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
- btdh->handle == sas_device->handle) {
- btdh->bus = sas_device->channel;
- btdh->id = sas_device->id;
- rc = 1;
- goto out;
- } else if (btdh->bus == sas_device->channel && btdh->id ==
- sas_device->id && btdh->handle == 0xFFFF) {
- btdh->handle = sas_device->handle;
- rc = 1;
- goto out;
- }
- }
- out:
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return rc;
-}
-
-/**
- * _ctl_btdh_search_raid_device - searching for raid device
- * @ioc: per adapter object
- * @btdh: btdh ioctl payload
- */
-static int
-_ctl_btdh_search_raid_device(struct MPT2SAS_ADAPTER *ioc,
- struct mpt2_ioctl_btdh_mapping *btdh)
-{
- struct _raid_device *raid_device;
- unsigned long flags;
- int rc = 0;
-
- if (list_empty(&ioc->raid_device_list))
- return rc;
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
- if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
- btdh->handle == raid_device->handle) {
- btdh->bus = raid_device->channel;
- btdh->id = raid_device->id;
- rc = 1;
- goto out;
- } else if (btdh->bus == raid_device->channel && btdh->id ==
- raid_device->id && btdh->handle == 0xFFFF) {
- btdh->handle = raid_device->handle;
- rc = 1;
- goto out;
- }
- }
- out:
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- return rc;
-}
-
-/**
- * _ctl_btdh_mapping - main handler for MPT2BTDHMAPPING opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_btdh_mapping(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_ioctl_btdh_mapping karg;
- int rc;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- rc = _ctl_btdh_search_sas_device(ioc, &karg);
- if (!rc)
- _ctl_btdh_search_raid_device(ioc, &karg);
-
- if (copy_to_user(arg, &karg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
- return 0;
-}
-
-/**
- * _ctl_diag_capability - return diag buffer capability
- * @ioc: per adapter object
- * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
- *
- * returns 1 when diag buffer support is enabled in firmware
- */
-static u8
-_ctl_diag_capability(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type)
-{
- u8 rc = 0;
-
- switch (buffer_type) {
- case MPI2_DIAG_BUF_TYPE_TRACE:
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
- rc = 1;
- break;
- case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
- rc = 1;
- break;
- case MPI2_DIAG_BUF_TYPE_EXTENDED:
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
- rc = 1;
- }
-
- return rc;
-}
-
-/**
- * _ctl_diag_register_2 - wrapper for registering diag buffer support
- * @ioc: per adapter object
- * @diag_register: the diag_register struct passed in from user space
- *
- */
-static long
-_ctl_diag_register_2(struct MPT2SAS_ADAPTER *ioc,
- struct mpt2_diag_register *diag_register)
-{
- int rc, i;
- void *request_data = NULL;
- dma_addr_t request_data_dma;
- u32 request_data_sz = 0;
- Mpi2DiagBufferPostRequest_t *mpi_request;
- Mpi2DiagBufferPostReply_t *mpi_reply;
- u8 buffer_type;
- unsigned long timeleft;
- u16 smid;
- u16 ioc_status;
- u8 issue_reset = 0;
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- buffer_type = diag_register->buffer_type;
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if (ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) {
- printk(MPT2SAS_ERR_FMT "%s: already has a registered "
- "buffer for buffer_type(0x%02x)\n", ioc->name, __func__,
- buffer_type);
- return -EINVAL;
- }
-
- if (diag_register->requested_buffer_size % 4) {
- printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size "
- "is not 4 byte aligned\n", ioc->name, __func__);
- return -EINVAL;
- }
-
- smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- rc = 0;
- ioc->ctl_cmds.status = MPT2_CMD_PENDING;
- memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->ctl_cmds.smid = smid;
-
- request_data = ioc->diag_buffer[buffer_type];
- request_data_sz = diag_register->requested_buffer_size;
- ioc->unique_id[buffer_type] = diag_register->unique_id;
- ioc->diag_buffer_status[buffer_type] = 0;
- memcpy(ioc->product_specific[buffer_type],
- diag_register->product_specific, MPT2_PRODUCT_SPECIFIC_DWORDS);
- ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
-
- if (request_data) {
- request_data_dma = ioc->diag_buffer_dma[buffer_type];
- if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
- pci_free_consistent(ioc->pdev,
- ioc->diag_buffer_sz[buffer_type],
- request_data, request_data_dma);
- request_data = NULL;
- }
- }
-
- if (request_data == NULL) {
- ioc->diag_buffer_sz[buffer_type] = 0;
- ioc->diag_buffer_dma[buffer_type] = 0;
- request_data = pci_alloc_consistent(
- ioc->pdev, request_data_sz, &request_data_dma);
- if (request_data == NULL) {
- printk(MPT2SAS_ERR_FMT "%s: failed allocating memory"
- " for diag buffers, requested size(%d)\n",
- ioc->name, __func__, request_data_sz);
- mpt2sas_base_free_smid(ioc, smid);
- return -ENOMEM;
- }
- ioc->diag_buffer[buffer_type] = request_data;
- ioc->diag_buffer_sz[buffer_type] = request_data_sz;
- ioc->diag_buffer_dma[buffer_type] = request_data_dma;
- }
-
- mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
- mpi_request->BufferType = diag_register->buffer_type;
- mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
- mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
- mpi_request->BufferLength = cpu_to_le32(request_data_sz);
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(0x%p), "
- "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data,
- (unsigned long long)request_data_dma,
- le32_to_cpu(mpi_request->BufferLength)));
-
- for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
- mpi_request->ProductSpecific[i] =
- cpu_to_le32(ioc->product_specific[buffer_type][i]);
-
- init_completion(&ioc->ctl_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
- MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
-
- if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
- __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2DiagBufferPostRequest_t)/4);
- if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
- }
-
- /* process the completed Reply Message Frame */
- if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto out;
- }
-
- mpi_reply = ioc->ctl_cmds.reply;
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
- if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
- ioc->diag_buffer_status[buffer_type] |=
- MPT2_DIAG_BUFFER_IS_REGISTERED;
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
- ioc->name, __func__));
- } else {
- printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
- "log_info(0x%08x)\n", ioc->name, __func__,
- ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
- rc = -EFAULT;
- }
-
- issue_host_reset:
- if (issue_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
-
- out:
-
- if (rc && request_data)
- pci_free_consistent(ioc->pdev, request_data_sz,
- request_data, request_data_dma);
-
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
- return rc;
-}
-
-/**
- * mpt2sas_enable_diag_buffer - enabling diag_buffers support driver load time
- * @ioc: per adapter object
- * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
- *
- * This is called when command line option diag_buffer_enable is enabled
- * at driver load time.
- */
-void
-mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc, u8 bits_to_register)
-{
- struct mpt2_diag_register diag_register;
-
- memset(&diag_register, 0, sizeof(struct mpt2_diag_register));
-
- if (bits_to_register & 1) {
- printk(MPT2SAS_INFO_FMT "registering trace buffer support\n",
- ioc->name);
- diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
- /* register for 1MB buffers */
- diag_register.requested_buffer_size = (1024 * 1024);
- diag_register.unique_id = 0x7075900;
- _ctl_diag_register_2(ioc, &diag_register);
- }
-
- if (bits_to_register & 2) {
- printk(MPT2SAS_INFO_FMT "registering snapshot buffer support\n",
- ioc->name);
- diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
- /* register for 2MB buffers */
- diag_register.requested_buffer_size = 2 * (1024 * 1024);
- diag_register.unique_id = 0x7075901;
- _ctl_diag_register_2(ioc, &diag_register);
- }
-
- if (bits_to_register & 4) {
- printk(MPT2SAS_INFO_FMT "registering extended buffer support\n",
- ioc->name);
- diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
- /* register for 2MB buffers */
- diag_register.requested_buffer_size = 2 * (1024 * 1024);
- diag_register.unique_id = 0x7075901;
- _ctl_diag_register_2(ioc, &diag_register);
- }
-}
-
-/**
- * _ctl_diag_register - application register with driver
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- *
- * This will allow the driver to setup any required buffers that will be
- * needed by firmware to communicate with the driver.
- */
-static long
-_ctl_diag_register(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_diag_register karg;
- long rc;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- rc = _ctl_diag_register_2(ioc, &karg);
- return rc;
-}
-
-/**
- * _ctl_diag_unregister - application unregister with driver
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- *
- * This will allow the driver to cleanup any memory allocated for diag
- * messages and to free up any resources.
- */
-static long
-_ctl_diag_unregister(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_diag_unregister karg;
- void *request_data;
- dma_addr_t request_data_dma;
- u32 request_data_sz;
- u8 buffer_type;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- buffer_type = karg.unique_id & 0x000000ff;
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
- "registered\n", ioc->name, __func__, buffer_type);
- return -EINVAL;
- }
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) has not been "
- "released\n", ioc->name, __func__, buffer_type);
- return -EINVAL;
- }
-
- if (karg.unique_id != ioc->unique_id[buffer_type]) {
- printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
- "registered\n", ioc->name, __func__, karg.unique_id);
- return -EINVAL;
- }
-
- request_data = ioc->diag_buffer[buffer_type];
- if (!request_data) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -ENOMEM;
- }
-
- request_data_sz = ioc->diag_buffer_sz[buffer_type];
- request_data_dma = ioc->diag_buffer_dma[buffer_type];
- pci_free_consistent(ioc->pdev, request_data_sz,
- request_data, request_data_dma);
- ioc->diag_buffer[buffer_type] = NULL;
- ioc->diag_buffer_status[buffer_type] = 0;
- return 0;
-}
-
-/**
- * _ctl_diag_query - query relevant info associated with diag buffers
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- *
- * The application will send only buffer_type and unique_id. Driver will
- * inspect unique_id first, if valid, fill in all the info. If unique_id is
- * 0x00, the driver will return info specified by Buffer Type.
- */
-static long
-_ctl_diag_query(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_diag_query karg;
- void *request_data;
- int i;
- u8 buffer_type;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- karg.application_flags = 0;
- buffer_type = karg.buffer_type;
-
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
- "registered\n", ioc->name, __func__, buffer_type);
- return -EINVAL;
- }
-
- if (karg.unique_id & 0xffffff00) {
- if (karg.unique_id != ioc->unique_id[buffer_type]) {
- printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
- "registered\n", ioc->name, __func__,
- karg.unique_id);
- return -EINVAL;
- }
- }
-
- request_data = ioc->diag_buffer[buffer_type];
- if (!request_data) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -ENOMEM;
- }
-
- if (ioc->diag_buffer_status[buffer_type] & MPT2_DIAG_BUFFER_IS_RELEASED)
- karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
- MPT2_APP_FLAGS_BUFFER_VALID);
- else
- karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
- MPT2_APP_FLAGS_BUFFER_VALID |
- MPT2_APP_FLAGS_FW_BUFFER_ACCESS);
-
- for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
- karg.product_specific[i] =
- ioc->product_specific[buffer_type][i];
-
- karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
- karg.driver_added_buffer_size = 0;
- karg.unique_id = ioc->unique_id[buffer_type];
- karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
-
- if (copy_to_user(arg, &karg, sizeof(struct mpt2_diag_query))) {
- printk(MPT2SAS_ERR_FMT "%s: unable to write mpt2_diag_query "
- "data @ %p\n", ioc->name, __func__, arg);
- return -EFAULT;
- }
- return 0;
-}
-
-/**
- * _ctl_send_release - Diag Release Message
- * @ioc: per adapter object
- * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
- * @issue_reset - specifies whether host reset is required.
- *
- */
-static int
-_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
-{
- Mpi2DiagReleaseRequest_t *mpi_request;
- Mpi2DiagReleaseReply_t *mpi_reply;
- u16 smid;
- u16 ioc_status;
- u32 ioc_state;
- int rc;
- unsigned long timeleft;
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- rc = 0;
- *issue_reset = 0;
-
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "skipping due to FAULT state\n", ioc->name,
- __func__));
- rc = -EAGAIN;
- goto out;
- }
-
- if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- ioc->ctl_cmds.status = MPT2_CMD_PENDING;
- memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->ctl_cmds.smid = smid;
-
- mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
- mpi_request->BufferType = buffer_type;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
-
- init_completion(&ioc->ctl_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
- MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
-
- if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
- __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2DiagReleaseRequest_t)/4);
- if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
- *issue_reset = 1;
- rc = -EFAULT;
- goto out;
- }
-
- /* process the completed Reply Message Frame */
- if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto out;
- }
-
- mpi_reply = ioc->ctl_cmds.reply;
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
- if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
- ioc->diag_buffer_status[buffer_type] |=
- MPT2_DIAG_BUFFER_IS_RELEASED;
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
- ioc->name, __func__));
- } else {
- printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
- "log_info(0x%08x)\n", ioc->name, __func__,
- ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
- rc = -EFAULT;
- }
-
- out:
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
- return rc;
-}
-
-/**
- * _ctl_diag_release - request to send Diag Release Message to firmware
- * @arg - user space buffer containing ioctl content
- *
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
- */
-static long
-_ctl_diag_release(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_diag_release karg;
- void *request_data;
- int rc;
- u8 buffer_type;
- u8 issue_reset = 0;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- buffer_type = karg.unique_id & 0x000000ff;
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
- "registered\n", ioc->name, __func__, buffer_type);
- return -EINVAL;
- }
-
- if (karg.unique_id != ioc->unique_id[buffer_type]) {
- printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
- "registered\n", ioc->name, __func__, karg.unique_id);
- return -EINVAL;
- }
-
- if (ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_RELEASED) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
- "is already released\n", ioc->name, __func__,
- buffer_type);
- return 0;
- }
-
- request_data = ioc->diag_buffer[buffer_type];
-
- if (!request_data) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -ENOMEM;
- }
-
- /* buffers were released by due to host reset */
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
- ioc->diag_buffer_status[buffer_type] |=
- MPT2_DIAG_BUFFER_IS_RELEASED;
- ioc->diag_buffer_status[buffer_type] &=
- ~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
- "was released due to host reset\n", ioc->name, __func__,
- buffer_type);
- return 0;
- }
-
- rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
-
- if (issue_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
-
- return rc;
-}
-
-/**
- * _ctl_diag_read_buffer - request for copy of the diag buffer
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_diag_read_buffer(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
- struct mpt2_diag_read_buffer karg;
- struct mpt2_diag_read_buffer __user *uarg = arg;
- void *request_data, *diag_data;
- Mpi2DiagBufferPostRequest_t *mpi_request;
- Mpi2DiagBufferPostReply_t *mpi_reply;
- int rc, i;
- u8 buffer_type;
- unsigned long timeleft, request_size, copy_size;
- u16 smid;
- u16 ioc_status;
- u8 issue_reset = 0;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- buffer_type = karg.unique_id & 0x000000ff;
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if (karg.unique_id != ioc->unique_id[buffer_type]) {
- printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
- "registered\n", ioc->name, __func__, karg.unique_id);
- return -EINVAL;
- }
-
- request_data = ioc->diag_buffer[buffer_type];
- if (!request_data) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -ENOMEM;
- }
-
- request_size = ioc->diag_buffer_sz[buffer_type];
-
- if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
- printk(MPT2SAS_ERR_FMT "%s: either the starting_offset "
- "or bytes_to_read are not 4 byte aligned\n", ioc->name,
- __func__);
- return -EINVAL;
- }
-
- if (karg.starting_offset > request_size)
- return -EINVAL;
-
- diag_data = (void *)(request_data + karg.starting_offset);
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), "
- "offset(%d), sz(%d)\n", ioc->name, __func__,
- diag_data, karg.starting_offset, karg.bytes_to_read));
-
- /* Truncate data on requests that are too large */
- if ((diag_data + karg.bytes_to_read < diag_data) ||
- (diag_data + karg.bytes_to_read > request_data + request_size))
- copy_size = request_size - karg.starting_offset;
- else
- copy_size = karg.bytes_to_read;
-
- if (copy_to_user((void __user *)uarg->diagnostic_data,
- diag_data, copy_size)) {
- printk(MPT2SAS_ERR_FMT "%s: Unable to write "
- "mpt_diag_read_buffer_t data @ %p\n", ioc->name,
- __func__, diag_data);
- return -EFAULT;
- }
-
- if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0)
- return 0;
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: Reregister "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type));
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "buffer_type(0x%02x) is still registered\n", ioc->name,
- __func__, buffer_type));
- return 0;
- }
- /* Get a free request frame and save the message context.
- */
-
- if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- rc = 0;
- ioc->ctl_cmds.status = MPT2_CMD_PENDING;
- memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->ctl_cmds.smid = smid;
-
- mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
- mpi_request->BufferType = buffer_type;
- mpi_request->BufferLength =
- cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
- mpi_request->BufferAddress =
- cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
- for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
- mpi_request->ProductSpecific[i] =
- cpu_to_le32(ioc->product_specific[buffer_type][i]);
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
-
- init_completion(&ioc->ctl_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
- MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
-
- if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
- __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2DiagBufferPostRequest_t)/4);
- if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
- }
-
- /* process the completed Reply Message Frame */
- if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto out;
- }
-
- mpi_reply = ioc->ctl_cmds.reply;
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
- if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
- ioc->diag_buffer_status[buffer_type] |=
- MPT2_DIAG_BUFFER_IS_REGISTERED;
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
- ioc->name, __func__));
- } else {
- printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
- "log_info(0x%08x)\n", ioc->name, __func__,
- ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
- rc = -EFAULT;
- }
-
- issue_host_reset:
- if (issue_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
-
- out:
-
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
- return rc;
-}
-
-
-#ifdef CONFIG_COMPAT
-/**
- * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
- * @ioc: per adapter object
- * @cmd - ioctl opcode
- * @arg - (struct mpt2_ioctl_command32)
- *
- * MPT2COMMAND32 - Handle 32bit applications running on 64bit os.
- */
-static long
-_ctl_compat_mpt_command(struct MPT2SAS_ADAPTER *ioc, unsigned cmd,
- void __user *arg)
-{
- struct mpt2_ioctl_command32 karg32;
- struct mpt2_ioctl_command32 __user *uarg;
- struct mpt2_ioctl_command karg;
-
- if (_IOC_SIZE(cmd) != sizeof(struct mpt2_ioctl_command32))
- return -EINVAL;
-
- uarg = (struct mpt2_ioctl_command32 __user *) arg;
-
- if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
- karg.hdr.ioc_number = karg32.hdr.ioc_number;
- karg.hdr.port_number = karg32.hdr.port_number;
- karg.hdr.max_data_size = karg32.hdr.max_data_size;
- karg.timeout = karg32.timeout;
- karg.max_reply_bytes = karg32.max_reply_bytes;
- karg.data_in_size = karg32.data_in_size;
- karg.data_out_size = karg32.data_out_size;
- karg.max_sense_bytes = karg32.max_sense_bytes;
- karg.data_sge_offset = karg32.data_sge_offset;
- karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
- karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
- karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
- karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
- return _ctl_do_mpt_command(ioc, karg, &uarg->mf);
-}
-#endif
-
-/**
- * _ctl_ioctl_main - main ioctl entry point
- * @file - (struct file)
- * @cmd - ioctl opcode
- * @arg -
- * compat - handles 32 bit applications in 64bit os
- */
-static long
-_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
- u8 compat)
-{
- struct MPT2SAS_ADAPTER *ioc;
- struct mpt2_ioctl_header ioctl_header;
- enum block_state state;
- long ret = -EINVAL;
-
- /* get IOCTL header */
- if (copy_from_user(&ioctl_header, (char __user *)arg,
- sizeof(struct mpt2_ioctl_header))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
- if (_ctl_verify_adapter(ioctl_header.ioc_number, &ioc) == -1 || !ioc)
- return -ENODEV;
- /* pci_access_mutex lock acquired by ioctl path */
- mutex_lock(&ioc->pci_access_mutex);
- if (ioc->shost_recovery || ioc->pci_error_recovery ||
- ioc->is_driver_loading || ioc->remove_host) {
- ret = -EAGAIN;
- goto out_unlock_pciaccess;
- }
-
- state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
- if (state == NON_BLOCKING) {
- if (!mutex_trylock(&ioc->ctl_cmds.mutex)) {
- ret = -EAGAIN;
- goto out_unlock_pciaccess;
- }
- } else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) {
- ret = -ERESTARTSYS;
- goto out_unlock_pciaccess;
- }
-
- switch (cmd) {
- case MPT2IOCINFO:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_iocinfo))
- ret = _ctl_getiocinfo(ioc, arg);
- break;
-#ifdef CONFIG_COMPAT
- case MPT2COMMAND32:
-#endif
- case MPT2COMMAND:
- {
- struct mpt2_ioctl_command __user *uarg;
- struct mpt2_ioctl_command karg;
-#ifdef CONFIG_COMPAT
- if (compat) {
- ret = _ctl_compat_mpt_command(ioc, cmd, arg);
- break;
- }
-#endif
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- ret = -EFAULT;
- break;
- }
-
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
- uarg = arg;
- ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf);
- }
- break;
- }
- case MPT2EVENTQUERY:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventquery))
- ret = _ctl_eventquery(ioc, arg);
- break;
- case MPT2EVENTENABLE:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventenable))
- ret = _ctl_eventenable(ioc, arg);
- break;
- case MPT2EVENTREPORT:
- ret = _ctl_eventreport(ioc, arg);
- break;
- case MPT2HARDRESET:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_diag_reset))
- ret = _ctl_do_reset(ioc, arg);
- break;
- case MPT2BTDHMAPPING:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_btdh_mapping))
- ret = _ctl_btdh_mapping(ioc, arg);
- break;
- case MPT2DIAGREGISTER:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_register))
- ret = _ctl_diag_register(ioc, arg);
- break;
- case MPT2DIAGUNREGISTER:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_unregister))
- ret = _ctl_diag_unregister(ioc, arg);
- break;
- case MPT2DIAGQUERY:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_query))
- ret = _ctl_diag_query(ioc, arg);
- break;
- case MPT2DIAGRELEASE:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_release))
- ret = _ctl_diag_release(ioc, arg);
- break;
- case MPT2DIAGREADBUFFER:
- if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_read_buffer))
- ret = _ctl_diag_read_buffer(ioc, arg);
- break;
- default:
-
- dctlprintk(ioc, printk(MPT2SAS_INFO_FMT
- "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd));
- break;
- }
-
- mutex_unlock(&ioc->ctl_cmds.mutex);
-out_unlock_pciaccess:
- mutex_unlock(&ioc->pci_access_mutex);
- return ret;
-}
-
-/**
- * _ctl_ioctl - main ioctl entry point (unlocked)
- * @file - (struct file)
- * @cmd - ioctl opcode
- * @arg -
- */
-static long
-_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- long ret;
-
- ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0);
- return ret;
-}
-#ifdef CONFIG_COMPAT
-/**
- * _ctl_ioctl_compat - main ioctl entry point (compat)
- * @file -
- * @cmd -
- * @arg -
- *
- * This routine handles 32 bit applications in 64bit os.
- */
-static long
-_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
-{
- long ret;
-
- ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1);
- return ret;
-}
-#endif
-
-/* scsi host attributes */
-
-/**
- * _ctl_version_fw_show - firmware version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
- (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
- (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
- (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
- ioc->facts.FWVersion.Word & 0x000000FF);
-}
-static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL);
-
-/**
- * _ctl_version_bios_show - bios version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
-
- return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
- (version & 0xFF000000) >> 24,
- (version & 0x00FF0000) >> 16,
- (version & 0x0000FF00) >> 8,
- version & 0x000000FF);
-}
-static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL);
-
-/**
- * _ctl_version_mpi_show - MPI (message passing interface) version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
- ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
-}
-static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL);
-
-/**
- * _ctl_version_product_show - product name
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_product_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
-}
-static DEVICE_ATTR(version_product, S_IRUGO,
- _ctl_version_product_show, NULL);
-
-/**
- * _ctl_version_nvdata_persistent_show - ndvata persistent version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_nvdata_persistent_show(struct device *cdev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%08xh\n",
- le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
-}
-static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
- _ctl_version_nvdata_persistent_show, NULL);
-
-/**
- * _ctl_version_nvdata_default_show - nvdata default version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_nvdata_default_show(struct device *cdev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%08xh\n",
- le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
-}
-static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
- _ctl_version_nvdata_default_show, NULL);
-
-/**
- * _ctl_board_name_show - board name
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_board_name_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
-}
-static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL);
-
-/**
- * _ctl_board_assembly_show - board assembly name
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
-}
-static DEVICE_ATTR(board_assembly, S_IRUGO,
- _ctl_board_assembly_show, NULL);
-
-/**
- * _ctl_board_tracer_show - board tracer number
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
-}
-static DEVICE_ATTR(board_tracer, S_IRUGO,
- _ctl_board_tracer_show, NULL);
-
-/**
- * _ctl_io_delay_show - io missing delay
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is for firmware implemention for deboucing device
- * removal events.
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
-}
-static DEVICE_ATTR(io_delay, S_IRUGO,
- _ctl_io_delay_show, NULL);
-
-/**
- * _ctl_device_delay_show - device missing delay
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is for firmware implemention for deboucing device
- * removal events.
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
-}
-static DEVICE_ATTR(device_delay, S_IRUGO,
- _ctl_device_delay_show, NULL);
-
-/**
- * _ctl_fw_queue_depth_show - global credits
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is firmware queue depth limit
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
-}
-static DEVICE_ATTR(fw_queue_depth, S_IRUGO,
- _ctl_fw_queue_depth_show, NULL);
-
-/**
- * _ctl_sas_address_show - sas address
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is the controller sas address
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
- (unsigned long long)ioc->sas_hba.sas_address);
-}
-static DEVICE_ATTR(host_sas_address, S_IRUGO,
- _ctl_host_sas_address_show, NULL);
-
-/**
- * _ctl_logging_level_show - logging level
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read/write' shost attribute.
- */
-static ssize_t
-_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
-}
-static ssize_t
-_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- int val = 0;
-
- if (sscanf(buf, "%x", &val) != 1)
- return -EINVAL;
-
- ioc->logging_level = val;
- printk(MPT2SAS_INFO_FMT "logging_level=%08xh\n", ioc->name,
- ioc->logging_level);
- return strlen(buf);
-}
-static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
- _ctl_logging_level_show, _ctl_logging_level_store);
-
-/* device attributes */
-/*
- * _ctl_fwfault_debug_show - show/store fwfault_debug
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * mpt2sas_fwfault_debug is command line option
- * A sysfs 'read/write' shost attribute.
- */
-static ssize_t
-_ctl_fwfault_debug_show(struct device *cdev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
-}
-static ssize_t
-_ctl_fwfault_debug_store(struct device *cdev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- int val = 0;
-
- if (sscanf(buf, "%d", &val) != 1)
- return -EINVAL;
-
- ioc->fwfault_debug = val;
- printk(MPT2SAS_INFO_FMT "fwfault_debug=%d\n", ioc->name,
- ioc->fwfault_debug);
- return strlen(buf);
-}
-static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR,
- _ctl_fwfault_debug_show, _ctl_fwfault_debug_store);
-
-
-/**
- * _ctl_ioc_reset_count_show - ioc reset count
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is firmware queue depth limit
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_ioc_reset_count_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- return snprintf(buf, PAGE_SIZE, "%08d\n", ioc->ioc_reset_count);
-}
-static DEVICE_ATTR(ioc_reset_count, S_IRUGO,
- _ctl_ioc_reset_count_show, NULL);
-
-/**
- * _ctl_ioc_reply_queue_count_show - number of reply queues
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is number of reply queues
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_ioc_reply_queue_count_show(struct device *cdev,
- struct device_attribute *attr, char *buf)
-{
- u8 reply_queue_count;
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- if ((ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
- reply_queue_count = ioc->reply_queue_count;
- else
- reply_queue_count = 1;
- return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
-}
-static DEVICE_ATTR(reply_queue_count, S_IRUGO,
- _ctl_ioc_reply_queue_count_show, NULL);
-
-/**
- * _ctl_BRM_status_show - Backup Rail Monitor Status
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is number of reply queues
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_BRM_status_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- Mpi2IOUnitPage3_t *io_unit_pg3 = NULL;
- Mpi2ConfigReply_t mpi_reply;
- u16 backup_rail_monitor_status = 0;
- u16 ioc_status;
- int sz;
- ssize_t rc = 0;
-
- if (!ioc->is_warpdrive) {
- printk(MPT2SAS_ERR_FMT "%s: BRM attribute is only for"\
- "warpdrive\n", ioc->name, __func__);
- goto out;
- }
- /* pci_access_mutex lock acquired by sysfs show path */
- mutex_lock(&ioc->pci_access_mutex);
- if (ioc->pci_error_recovery || ioc->remove_host) {
- mutex_unlock(&ioc->pci_access_mutex);
- return 0;
- }
-
- /* allocate upto GPIOVal 36 entries */
- sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36);
- io_unit_pg3 = kzalloc(sz, GFP_KERNEL);
- if (!io_unit_pg3) {
- printk(MPT2SAS_ERR_FMT "%s: failed allocating memory"\
- "for iounit_pg3: (%d) bytes\n", ioc->name, __func__, sz);
- goto out;
- }
-
- if (mpt2sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) !=
- 0) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed reading iounit_pg3\n", ioc->name,
- __func__);
- goto out;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "%s: iounit_pg3 failed with"\
- "ioc_status(0x%04x)\n", ioc->name, __func__, ioc_status);
- goto out;
- }
-
- if (io_unit_pg3->GPIOCount < 25) {
- printk(MPT2SAS_ERR_FMT "%s: iounit_pg3->GPIOCount less than"\
- "25 entries, detected (%d) entries\n", ioc->name, __func__,
- io_unit_pg3->GPIOCount);
- goto out;
- }
-
- /* BRM status is in bit zero of GPIOVal[24] */
- backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
- rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
-
- out:
- kfree(io_unit_pg3);
- mutex_unlock(&ioc->pci_access_mutex);
- return rc;
-}
-static DEVICE_ATTR(BRM_status, S_IRUGO, _ctl_BRM_status_show, NULL);
-
-struct DIAG_BUFFER_START {
- __le32 Size;
- __le32 DiagVersion;
- u8 BufferType;
- u8 Reserved[3];
- __le32 Reserved1;
- __le32 Reserved2;
- __le32 Reserved3;
-};
-/**
- * _ctl_host_trace_buffer_size_show - host buffer size (trace only)
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_host_trace_buffer_size_show(struct device *cdev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- u32 size = 0;
- struct DIAG_BUFFER_START *request_data;
-
- if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
- printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
- "registered\n", ioc->name, __func__);
- return 0;
- }
-
- if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
- "registered\n", ioc->name, __func__);
- return 0;
- }
-
- request_data = (struct DIAG_BUFFER_START *)
- ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE];
- if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 ||
- le32_to_cpu(request_data->DiagVersion) == 0x01000000) &&
- le32_to_cpu(request_data->Reserved3) == 0x4742444c)
- size = le32_to_cpu(request_data->Size);
-
- ioc->ring_buffer_sz = size;
- return snprintf(buf, PAGE_SIZE, "%d\n", size);
-}
-static DEVICE_ATTR(host_trace_buffer_size, S_IRUGO,
- _ctl_host_trace_buffer_size_show, NULL);
-
-/**
- * _ctl_host_trace_buffer_show - firmware ring buffer (trace only)
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read/write' shost attribute.
- *
- * You will only be able to read 4k bytes of ring buffer at a time.
- * In order to read beyond 4k bytes, you will have to write out the
- * offset to the same attribute, it will move the pointer.
- */
-static ssize_t
-_ctl_host_trace_buffer_show(struct device *cdev, struct device_attribute *attr,
- char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- void *request_data;
- u32 size;
-
- if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
- printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
- "registered\n", ioc->name, __func__);
- return 0;
- }
-
- if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
- "registered\n", ioc->name, __func__);
- return 0;
- }
-
- if (ioc->ring_buffer_offset > ioc->ring_buffer_sz)
- return 0;
-
- size = ioc->ring_buffer_sz - ioc->ring_buffer_offset;
- size = (size > PAGE_SIZE) ? PAGE_SIZE : size;
- request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset;
- memcpy(buf, request_data, size);
- return size;
-}
-
-static ssize_t
-_ctl_host_trace_buffer_store(struct device *cdev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- int val = 0;
-
- if (sscanf(buf, "%d", &val) != 1)
- return -EINVAL;
-
- ioc->ring_buffer_offset = val;
- return strlen(buf);
-}
-static DEVICE_ATTR(host_trace_buffer, S_IRUGO | S_IWUSR,
- _ctl_host_trace_buffer_show, _ctl_host_trace_buffer_store);
-
-/*****************************************/
-
-/**
- * _ctl_host_trace_buffer_enable_show - firmware ring buffer (trace only)
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read/write' shost attribute.
- *
- * This is a mechnism to post/release host_trace_buffers
- */
-static ssize_t
-_ctl_host_trace_buffer_enable_show(struct device *cdev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) ||
- ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0))
- return snprintf(buf, PAGE_SIZE, "off\n");
- else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
- MPT2_DIAG_BUFFER_IS_RELEASED))
- return snprintf(buf, PAGE_SIZE, "release\n");
- else
- return snprintf(buf, PAGE_SIZE, "post\n");
-}
-
-static ssize_t
-_ctl_host_trace_buffer_enable_store(struct device *cdev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct Scsi_Host *shost = class_to_shost(cdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- char str[10] = "";
- struct mpt2_diag_register diag_register;
- u8 issue_reset = 0;
-
- if (sscanf(buf, "%9s", str) != 1)
- return -EINVAL;
-
- if (!strcmp(str, "post")) {
- /* exit out if host buffers are already posted */
- if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) &&
- (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) &&
- ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
- MPT2_DIAG_BUFFER_IS_RELEASED) == 0))
- goto out;
- memset(&diag_register, 0, sizeof(struct mpt2_diag_register));
- printk(MPT2SAS_INFO_FMT "posting host trace buffers\n",
- ioc->name);
- diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
- diag_register.requested_buffer_size = (1024 * 1024);
- diag_register.unique_id = 0x7075900;
- ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0;
- _ctl_diag_register_2(ioc, &diag_register);
- } else if (!strcmp(str, "release")) {
- /* exit out if host buffers are already released */
- if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE])
- goto out;
- if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0)
- goto out;
- if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
- MPT2_DIAG_BUFFER_IS_RELEASED))
- goto out;
- printk(MPT2SAS_INFO_FMT "releasing host trace buffer\n",
- ioc->name);
- _ctl_send_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE, &issue_reset);
- }
-
- out:
- return strlen(buf);
-}
-static DEVICE_ATTR(host_trace_buffer_enable, S_IRUGO | S_IWUSR,
- _ctl_host_trace_buffer_enable_show, _ctl_host_trace_buffer_enable_store);
-
-struct device_attribute *mpt2sas_host_attrs[] = {
- &dev_attr_version_fw,
- &dev_attr_version_bios,
- &dev_attr_version_mpi,
- &dev_attr_version_product,
- &dev_attr_version_nvdata_persistent,
- &dev_attr_version_nvdata_default,
- &dev_attr_board_name,
- &dev_attr_board_assembly,
- &dev_attr_board_tracer,
- &dev_attr_io_delay,
- &dev_attr_device_delay,
- &dev_attr_logging_level,
- &dev_attr_fwfault_debug,
- &dev_attr_fw_queue_depth,
- &dev_attr_host_sas_address,
- &dev_attr_ioc_reset_count,
- &dev_attr_host_trace_buffer_size,
- &dev_attr_host_trace_buffer,
- &dev_attr_host_trace_buffer_enable,
- &dev_attr_reply_queue_count,
- &dev_attr_BRM_status,
- NULL,
-};
-
-/**
- * _ctl_device_sas_address_show - sas address
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is the sas address for the target
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct scsi_device *sdev = to_scsi_device(dev);
- struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
-
- return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
- (unsigned long long)sas_device_priv_data->sas_target->sas_address);
-}
-static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL);
-
-/**
- * _ctl_device_handle_show - device handle
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is the firmware assigned device handle
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_device_handle_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct scsi_device *sdev = to_scsi_device(dev);
- struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
-
- return snprintf(buf, PAGE_SIZE, "0x%04x\n",
- sas_device_priv_data->sas_target->handle);
-}
-static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL);
-
-struct device_attribute *mpt2sas_dev_attrs[] = {
- &dev_attr_sas_address,
- &dev_attr_sas_device_handle,
- NULL,
-};
-
-static const struct file_operations ctl_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = _ctl_ioctl,
- .poll = _ctl_poll,
- .fasync = _ctl_fasync,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = _ctl_ioctl_compat,
-#endif
- .llseek = noop_llseek,
-};
-
-static struct miscdevice ctl_dev = {
- .minor = MPT2SAS_MINOR,
- .name = MPT2SAS_DEV_NAME,
- .fops = &ctl_fops,
-};
-
-/**
- * mpt2sas_ctl_init - main entry point for ctl.
- *
- */
-void
-mpt2sas_ctl_init(void)
-{
- async_queue = NULL;
- if (misc_register(&ctl_dev) < 0)
- printk(KERN_ERR "%s can't register misc device [minor=%d]\n",
- MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
-
- init_waitqueue_head(&ctl_poll_wait);
-}
-
-/**
- * mpt2sas_ctl_exit - exit point for ctl
- *
- */
-void
-mpt2sas_ctl_exit(void)
-{
- struct MPT2SAS_ADAPTER *ioc;
- int i;
-
- list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
-
- /* free memory associated to diag buffers */
- for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
- if (!ioc->diag_buffer[i])
- continue;
- pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i],
- ioc->diag_buffer[i], ioc->diag_buffer_dma[i]);
- ioc->diag_buffer[i] = NULL;
- ioc->diag_buffer_status[i] = 0;
- }
-
- kfree(ioc->event_log);
- }
- misc_deregister(&ctl_dev);
-}
-
+++ /dev/null
-/*
- * Management Module Support for MPT (Message Passing Technology) based
- * controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_CTL_H_INCLUDED
-#define MPT2SAS_CTL_H_INCLUDED
-
-#ifdef __KERNEL__
-#include <linux/miscdevice.h>
-#endif
-
-#define MPT2SAS_DEV_NAME "mpt2ctl"
-#define MPT2_MAGIC_NUMBER 'L'
-#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
-
-/**
- * IOCTL opcodes
- */
-#define MPT2IOCINFO _IOWR(MPT2_MAGIC_NUMBER, 17, \
- struct mpt2_ioctl_iocinfo)
-#define MPT2COMMAND _IOWR(MPT2_MAGIC_NUMBER, 20, \
- struct mpt2_ioctl_command)
-#ifdef CONFIG_COMPAT
-#define MPT2COMMAND32 _IOWR(MPT2_MAGIC_NUMBER, 20, \
- struct mpt2_ioctl_command32)
-#endif
-#define MPT2EVENTQUERY _IOWR(MPT2_MAGIC_NUMBER, 21, \
- struct mpt2_ioctl_eventquery)
-#define MPT2EVENTENABLE _IOWR(MPT2_MAGIC_NUMBER, 22, \
- struct mpt2_ioctl_eventenable)
-#define MPT2EVENTREPORT _IOWR(MPT2_MAGIC_NUMBER, 23, \
- struct mpt2_ioctl_eventreport)
-#define MPT2HARDRESET _IOWR(MPT2_MAGIC_NUMBER, 24, \
- struct mpt2_ioctl_diag_reset)
-#define MPT2BTDHMAPPING _IOWR(MPT2_MAGIC_NUMBER, 31, \
- struct mpt2_ioctl_btdh_mapping)
-
-/* diag buffer support */
-#define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \
- struct mpt2_diag_register)
-#define MPT2DIAGRELEASE _IOWR(MPT2_MAGIC_NUMBER, 27, \
- struct mpt2_diag_release)
-#define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \
- struct mpt2_diag_unregister)
-#define MPT2DIAGQUERY _IOWR(MPT2_MAGIC_NUMBER, 29, \
- struct mpt2_diag_query)
-#define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \
- struct mpt2_diag_read_buffer)
-
-/**
- * struct mpt2_ioctl_header - main header structure
- * @ioc_number - IOC unit number
- * @port_number - IOC port number
- * @max_data_size - maximum number bytes to transfer on read
- */
-struct mpt2_ioctl_header {
- uint32_t ioc_number;
- uint32_t port_number;
- uint32_t max_data_size;
-};
-
-/**
- * struct mpt2_ioctl_diag_reset - diagnostic reset
- * @hdr - generic header
- */
-struct mpt2_ioctl_diag_reset {
- struct mpt2_ioctl_header hdr;
-};
-
-
-/**
- * struct mpt2_ioctl_pci_info - pci device info
- * @device - pci device id
- * @function - pci function id
- * @bus - pci bus id
- * @segment_id - pci segment id
- */
-struct mpt2_ioctl_pci_info {
- union {
- struct {
- uint32_t device:5;
- uint32_t function:3;
- uint32_t bus:24;
- } bits;
- uint32_t word;
- } u;
- uint32_t segment_id;
-};
-
-
-#define MPT2_IOCTL_INTERFACE_SCSI (0x00)
-#define MPT2_IOCTL_INTERFACE_FC (0x01)
-#define MPT2_IOCTL_INTERFACE_FC_IP (0x02)
-#define MPT2_IOCTL_INTERFACE_SAS (0x03)
-#define MPT2_IOCTL_INTERFACE_SAS2 (0x04)
-#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200 (0x05)
-#define MPT2_IOCTL_VERSION_LENGTH (32)
-
-/**
- * struct mpt2_ioctl_iocinfo - generic controller info
- * @hdr - generic header
- * @adapter_type - type of adapter (spi, fc, sas)
- * @port_number - port number
- * @pci_id - PCI Id
- * @hw_rev - hardware revision
- * @sub_system_device - PCI subsystem Device ID
- * @sub_system_vendor - PCI subsystem Vendor ID
- * @rsvd0 - reserved
- * @firmware_version - firmware version
- * @bios_version - BIOS version
- * @driver_version - driver version - 32 ASCII characters
- * @rsvd1 - reserved
- * @scsi_id - scsi id of adapter 0
- * @rsvd2 - reserved
- * @pci_information - pci info (2nd revision)
- */
-struct mpt2_ioctl_iocinfo {
- struct mpt2_ioctl_header hdr;
- uint32_t adapter_type;
- uint32_t port_number;
- uint32_t pci_id;
- uint32_t hw_rev;
- uint32_t subsystem_device;
- uint32_t subsystem_vendor;
- uint32_t rsvd0;
- uint32_t firmware_version;
- uint32_t bios_version;
- uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
- uint8_t rsvd1;
- uint8_t scsi_id;
- uint16_t rsvd2;
- struct mpt2_ioctl_pci_info pci_information;
-};
-
-
-/* number of event log entries */
-#define MPT2SAS_CTL_EVENT_LOG_SIZE (50)
-
-/**
- * struct mpt2_ioctl_eventquery - query event count and type
- * @hdr - generic header
- * @event_entries - number of events returned by get_event_report
- * @rsvd - reserved
- * @event_types - type of events currently being captured
- */
-struct mpt2_ioctl_eventquery {
- struct mpt2_ioctl_header hdr;
- uint16_t event_entries;
- uint16_t rsvd;
- uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
-};
-
-/**
- * struct mpt2_ioctl_eventenable - enable/disable event capturing
- * @hdr - generic header
- * @event_types - toggle off/on type of events to be captured
- */
-struct mpt2_ioctl_eventenable {
- struct mpt2_ioctl_header hdr;
- uint32_t event_types[4];
-};
-
-#define MPT2_EVENT_DATA_SIZE (192)
-/**
- * struct MPT2_IOCTL_EVENTS -
- * @event - the event that was reported
- * @context - unique value for each event assigned by driver
- * @data - event data returned in fw reply message
- */
-struct MPT2_IOCTL_EVENTS {
- uint32_t event;
- uint32_t context;
- uint8_t data[MPT2_EVENT_DATA_SIZE];
-};
-
-/**
- * struct mpt2_ioctl_eventreport - returing event log
- * @hdr - generic header
- * @event_data - (see struct MPT2_IOCTL_EVENTS)
- */
-struct mpt2_ioctl_eventreport {
- struct mpt2_ioctl_header hdr;
- struct MPT2_IOCTL_EVENTS event_data[1];
-};
-
-/**
- * struct mpt2_ioctl_command - generic mpt firmware passthru ioctl
- * @hdr - generic header
- * @timeout - command timeout in seconds. (if zero then use driver default
- * value).
- * @reply_frame_buf_ptr - reply location
- * @data_in_buf_ptr - destination for read
- * @data_out_buf_ptr - data source for write
- * @sense_data_ptr - sense data location
- * @max_reply_bytes - maximum number of reply bytes to be sent to app.
- * @data_in_size - number bytes for data transfer in (read)
- * @data_out_size - number bytes for data transfer out (write)
- * @max_sense_bytes - maximum number of bytes for auto sense buffers
- * @data_sge_offset - offset in words from the start of the request message to
- * the first SGL
- * @mf[1];
- */
-struct mpt2_ioctl_command {
- struct mpt2_ioctl_header hdr;
- uint32_t timeout;
- void __user *reply_frame_buf_ptr;
- void __user *data_in_buf_ptr;
- void __user *data_out_buf_ptr;
- void __user *sense_data_ptr;
- uint32_t max_reply_bytes;
- uint32_t data_in_size;
- uint32_t data_out_size;
- uint32_t max_sense_bytes;
- uint32_t data_sge_offset;
- uint8_t mf[1];
-};
-
-#ifdef CONFIG_COMPAT
-struct mpt2_ioctl_command32 {
- struct mpt2_ioctl_header hdr;
- uint32_t timeout;
- uint32_t reply_frame_buf_ptr;
- uint32_t data_in_buf_ptr;
- uint32_t data_out_buf_ptr;
- uint32_t sense_data_ptr;
- uint32_t max_reply_bytes;
- uint32_t data_in_size;
- uint32_t data_out_size;
- uint32_t max_sense_bytes;
- uint32_t data_sge_offset;
- uint8_t mf[1];
-};
-#endif
-
-/**
- * struct mpt2_ioctl_btdh_mapping - mapping info
- * @hdr - generic header
- * @id - target device identification number
- * @bus - SCSI bus number that the target device exists on
- * @handle - device handle for the target device
- * @rsvd - reserved
- *
- * To obtain a bus/id the application sets
- * handle to valid handle, and bus/id to 0xFFFF.
- *
- * To obtain the device handle the application sets
- * bus/id valid value, and the handle to 0xFFFF.
- */
-struct mpt2_ioctl_btdh_mapping {
- struct mpt2_ioctl_header hdr;
- uint32_t id;
- uint32_t bus;
- uint16_t handle;
- uint16_t rsvd;
-};
-
-
-/* status bits for ioc->diag_buffer_status */
-#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
-#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
-#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04)
-
-/* application flags for mpt2_diag_register, mpt2_diag_query */
-#define MPT2_APP_FLAGS_APP_OWNED (0x0001)
-#define MPT2_APP_FLAGS_BUFFER_VALID (0x0002)
-#define MPT2_APP_FLAGS_FW_BUFFER_ACCESS (0x0004)
-
-/* flags for mpt2_diag_read_buffer */
-#define MPT2_FLAGS_REREGISTER (0x0001)
-
-#define MPT2_PRODUCT_SPECIFIC_DWORDS 23
-
-/**
- * struct mpt2_diag_register - application register with driver
- * @hdr - generic header
- * @reserved -
- * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
- * @application_flags - misc flags
- * @diagnostic_flags - specifies flags affecting command processing
- * @product_specific - product specific information
- * @requested_buffer_size - buffers size in bytes
- * @unique_id - tag specified by application that is used to signal ownership
- * of the buffer.
- *
- * This will allow the driver to setup any required buffers that will be
- * needed by firmware to communicate with the driver.
- */
-struct mpt2_diag_register {
- struct mpt2_ioctl_header hdr;
- uint8_t reserved;
- uint8_t buffer_type;
- uint16_t application_flags;
- uint32_t diagnostic_flags;
- uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
- uint32_t requested_buffer_size;
- uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_unregister - application unregister with driver
- * @hdr - generic header
- * @unique_id - tag uniquely identifies the buffer to be unregistered
- *
- * This will allow the driver to cleanup any memory allocated for diag
- * messages and to free up any resources.
- */
-struct mpt2_diag_unregister {
- struct mpt2_ioctl_header hdr;
- uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_query - query relevant info associated with diag buffers
- * @hdr - generic header
- * @reserved -
- * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
- * @application_flags - misc flags
- * @diagnostic_flags - specifies flags affecting command processing
- * @product_specific - product specific information
- * @total_buffer_size - diag buffer size in bytes
- * @driver_added_buffer_size - size of extra space appended to end of buffer
- * @unique_id - unique id associated with this buffer.
- *
- * The application will send only buffer_type and unique_id. Driver will
- * inspect unique_id first, if valid, fill in all the info. If unique_id is
- * 0x00, the driver will return info specified by Buffer Type.
- */
-struct mpt2_diag_query {
- struct mpt2_ioctl_header hdr;
- uint8_t reserved;
- uint8_t buffer_type;
- uint16_t application_flags;
- uint32_t diagnostic_flags;
- uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
- uint32_t total_buffer_size;
- uint32_t driver_added_buffer_size;
- uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_release - request to send Diag Release Message to firmware
- * @hdr - generic header
- * @unique_id - tag uniquely identifies the buffer to be released
- *
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
- */
-struct mpt2_diag_release {
- struct mpt2_ioctl_header hdr;
- uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_read_buffer - request for copy of the diag buffer
- * @hdr - generic header
- * @status -
- * @reserved -
- * @flags - misc flags
- * @starting_offset - starting offset within drivers buffer where to start
- * reading data at into the specified application buffer
- * @bytes_to_read - number of bytes to copy from the drivers buffer into the
- * application buffer starting at starting_offset.
- * @unique_id - unique id associated with this buffer.
- * @diagnostic_data - data payload
- */
-struct mpt2_diag_read_buffer {
- struct mpt2_ioctl_header hdr;
- uint8_t status;
- uint8_t reserved;
- uint16_t flags;
- uint32_t starting_offset;
- uint32_t bytes_to_read;
- uint32_t unique_id;
- uint32_t diagnostic_data[1];
-};
-
-#endif /* MPT2SAS_CTL_H_INCLUDED */
+++ /dev/null
-/*
- * Logging Support for MPT (Message Passing Technology) based controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_DEBUG_H_INCLUDED
-#define MPT2SAS_DEBUG_H_INCLUDED
-
-#define MPT_DEBUG 0x00000001
-#define MPT_DEBUG_MSG_FRAME 0x00000002
-#define MPT_DEBUG_SG 0x00000004
-#define MPT_DEBUG_EVENTS 0x00000008
-#define MPT_DEBUG_EVENT_WORK_TASK 0x00000010
-#define MPT_DEBUG_INIT 0x00000020
-#define MPT_DEBUG_EXIT 0x00000040
-#define MPT_DEBUG_FAIL 0x00000080
-#define MPT_DEBUG_TM 0x00000100
-#define MPT_DEBUG_REPLY 0x00000200
-#define MPT_DEBUG_HANDSHAKE 0x00000400
-#define MPT_DEBUG_CONFIG 0x00000800
-#define MPT_DEBUG_DL 0x00001000
-#define MPT_DEBUG_RESET 0x00002000
-#define MPT_DEBUG_SCSI 0x00004000
-#define MPT_DEBUG_IOCTL 0x00008000
-#define MPT_DEBUG_CSMISAS 0x00010000
-#define MPT_DEBUG_SAS 0x00020000
-#define MPT_DEBUG_TRANSPORT 0x00040000
-#define MPT_DEBUG_TASK_SET_FULL 0x00080000
-
-#define MPT_DEBUG_TARGET_MODE 0x00100000
-
-
-/*
- * CONFIG_SCSI_MPT2SAS_LOGGING - enabled in Kconfig
- */
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS) \
-{ \
- if (IOC->logging_level & BITS) \
- CMD; \
-}
-#else
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)
-#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */
-
-
-/*
- * debug macros
- */
-
-#define dprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG)
-
-#define dsgprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG)
-
-#define devtprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS)
-
-#define dewtprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENT_WORK_TASK)
-
-#define dinitprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT)
-
-#define dexitprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT)
-
-#define dfailprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL)
-
-#define dtmprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM)
-
-#define dreplyprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY)
-
-#define dhsprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE)
-
-#define dcprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG)
-
-#define ddlprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL)
-
-#define drsprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET)
-
-#define dsprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI)
-
-#define dctlprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL)
-
-#define dcsmisasprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CSMISAS)
-
-#define dsasprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS)
-
-#define dsastransport(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
-
-#define dmfprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME)
-
-#define dtsfprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TASK_SET_FULL)
-
-#define dtransportprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRANSPORT)
-
-#define dTMprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TARGET_MODE)
-
-/* inline functions for dumping debug data*/
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _debug_dump_mf - print message frame contents
- * @mpi_request: pointer to message frame
- * @sz: number of dwords
- */
-static inline void
-_debug_dump_mf(void *mpi_request, int sz)
-{
- int i;
- __le32 *mfp = (__le32 *)mpi_request;
-
- printk(KERN_INFO "mf:\n\t");
- for (i = 0; i < sz; i++) {
- if (i && ((i % 8) == 0))
- printk("\n\t");
- printk("%08x ", le32_to_cpu(mfp[i]));
- }
- printk("\n");
-}
-#else
-#define _debug_dump_mf(mpi_request, sz)
-#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */
-
-#endif /* MPT2SAS_DEBUG_H_INCLUDED */
+++ /dev/null
-/*
- * Scsi Host Layer for MPT (Message Passing Technology) based controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/blkdev.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/aer.h>
-#include <linux/raid_class.h>
-#include <linux/slab.h>
-
-#include <asm/unaligned.h>
-
-#include "mpt2sas_base.h"
-
-MODULE_AUTHOR(MPT2SAS_AUTHOR);
-MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT2SAS_DRIVER_VERSION);
-
-#define RAID_CHANNEL 1
-
-/* forward proto's */
-static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_node *sas_expander);
-static void _firmware_event_work(struct work_struct *work);
-
-static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-
-static void _scsih_scan_start(struct Scsi_Host *shost);
-static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
-
-/* global parameters */
-LIST_HEAD(mpt2sas_ioc_list);
-/* global ioc lock for list operations */
-DEFINE_SPINLOCK(gioc_lock);
-/* local parameters */
-static u8 scsi_io_cb_idx = -1;
-static u8 tm_cb_idx = -1;
-static u8 ctl_cb_idx = -1;
-static u8 base_cb_idx = -1;
-static u8 port_enable_cb_idx = -1;
-static u8 transport_cb_idx = -1;
-static u8 scsih_cb_idx = -1;
-static u8 config_cb_idx = -1;
-static int mpt_ids;
-
-static u8 tm_tr_cb_idx = -1 ;
-static u8 tm_tr_volume_cb_idx = -1 ;
-static u8 tm_sas_control_cb_idx = -1;
-
-/* command line options */
-static u32 logging_level;
-MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info "
- "(default=0)");
-
-static ushort max_sectors = 0xFFFF;
-module_param(max_sectors, ushort, 0);
-MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767 default=32767");
-
-static int missing_delay[2] = {-1, -1};
-module_param_array(missing_delay, int, NULL, 0);
-MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
-
-/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
-#define MPT2SAS_MAX_LUN (16895)
-static int max_lun = MPT2SAS_MAX_LUN;
-module_param(max_lun, int, 0);
-MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
-
-/* diag_buffer_enable is bitwise
- * bit 0 set = TRACE
- * bit 1 set = SNAPSHOT
- * bit 2 set = EXTENDED
- *
- * Either bit can be set, or both
- */
-static int diag_buffer_enable = -1;
-module_param(diag_buffer_enable, int, 0);
-MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
- "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
-
-static int disable_discovery = -1;
-module_param(disable_discovery, int, 0);
-MODULE_PARM_DESC(disable_discovery, " disable discovery ");
-
-/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
-static int prot_mask = 0;
-module_param(prot_mask, int, 0);
-MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
-
-/**
- * struct sense_info - common structure for obtaining sense keys
- * @skey: sense key
- * @asc: additional sense code
- * @ascq: additional sense code qualifier
- */
-struct sense_info {
- u8 skey;
- u8 asc;
- u8 ascq;
-};
-
-
-#define MPT2SAS_TURN_ON_PFA_LED (0xFFFC)
-#define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD)
-#define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
-/**
- * struct fw_event_work - firmware event struct
- * @list: link list framework
- * @work: work object (ioc->fault_reset_work_q)
- * @cancel_pending_work: flag set during reset handling
- * @ioc: per adapter object
- * @device_handle: device handle
- * @VF_ID: virtual function id
- * @VP_ID: virtual port id
- * @ignore: flag meaning this event has been marked to ignore
- * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
- * @event_data: reply event data payload follows
- *
- * This object stored on ioc->fw_event_list.
- */
-struct fw_event_work {
- struct list_head list;
- u8 cancel_pending_work;
- struct delayed_work delayed_work;
- struct MPT2SAS_ADAPTER *ioc;
- u16 device_handle;
- u8 VF_ID;
- u8 VP_ID;
- u8 ignore;
- u16 event;
- struct kref refcount;
- char event_data[0] __aligned(4);
-};
-
-static void fw_event_work_free(struct kref *r)
-{
- kfree(container_of(r, struct fw_event_work, refcount));
-}
-
-static void fw_event_work_get(struct fw_event_work *fw_work)
-{
- kref_get(&fw_work->refcount);
-}
-
-static void fw_event_work_put(struct fw_event_work *fw_work)
-{
- kref_put(&fw_work->refcount, fw_event_work_free);
-}
-
-static struct fw_event_work *alloc_fw_event_work(int len)
-{
- struct fw_event_work *fw_event;
-
- fw_event = kzalloc(sizeof(*fw_event) + len, GFP_ATOMIC);
- if (!fw_event)
- return NULL;
-
- kref_init(&fw_event->refcount);
- return fw_event;
-}
-
-/* raid transport support */
-static struct raid_template *mpt2sas_raid_template;
-
-/**
- * struct _scsi_io_transfer - scsi io transfer
- * @handle: sas device handle (assigned by firmware)
- * @is_raid: flag set for hidden raid components
- * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
- * @data_length: data transfer length
- * @data_dma: dma pointer to data
- * @sense: sense data
- * @lun: lun number
- * @cdb_length: cdb length
- * @cdb: cdb contents
- * @timeout: timeout for this command
- * @VF_ID: virtual function id
- * @VP_ID: virtual port id
- * @valid_reply: flag set for reply message
- * @sense_length: sense length
- * @ioc_status: ioc status
- * @scsi_state: scsi state
- * @scsi_status: scsi staus
- * @log_info: log information
- * @transfer_length: data length transfer when there is a reply message
- *
- * Used for sending internal scsi commands to devices within this module.
- * Refer to _scsi_send_scsi_io().
- */
-struct _scsi_io_transfer {
- u16 handle;
- u8 is_raid;
- enum dma_data_direction dir;
- u32 data_length;
- dma_addr_t data_dma;
- u8 sense[SCSI_SENSE_BUFFERSIZE];
- u32 lun;
- u8 cdb_length;
- u8 cdb[32];
- u8 timeout;
- u8 VF_ID;
- u8 VP_ID;
- u8 valid_reply;
- /* the following bits are only valid when 'valid_reply = 1' */
- u32 sense_length;
- u16 ioc_status;
- u8 scsi_state;
- u8 scsi_status;
- u32 log_info;
- u32 transfer_length;
-};
-
-/*
- * The pci device ids are defined in mpi/mpi2_cnfg.h.
- */
-static struct pci_device_id scsih_pci_table[] = {
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Falcon ~ 2008*/
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Liberator ~ 2108 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Meteor ~ 2116 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Thunderbolt ~ 2208 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Mustang ~ 2308 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
- PCI_ANY_ID, PCI_ANY_ID },
- /* SSS6200 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
- PCI_ANY_ID, PCI_ANY_ID },
- {0} /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, scsih_pci_table);
-
-/**
- * _scsih_set_debug_level - global setting of ioc->logging_level.
- *
- * Note: The logging levels are defined in mpt2sas_debug.h.
- */
-static int
-_scsih_set_debug_level(const char *val, struct kernel_param *kp)
-{
- int ret = param_set_int(val, kp);
- struct MPT2SAS_ADAPTER *ioc;
-
- if (ret)
- return ret;
-
- printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level);
- spin_lock(&gioc_lock);
- list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
- ioc->logging_level = logging_level;
- spin_unlock(&gioc_lock);
- return 0;
-}
-module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
- &logging_level, 0644);
-
-/**
- * _scsih_srch_boot_sas_address - search based on sas_address
- * @sas_address: sas address
- * @boot_device: boot device object from bios page 2
- *
- * Returns 1 when there's a match, 0 means no match.
- */
-static inline int
-_scsih_srch_boot_sas_address(u64 sas_address,
- Mpi2BootDeviceSasWwid_t *boot_device)
-{
- return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0;
-}
-
-/**
- * _scsih_srch_boot_device_name - search based on device name
- * @device_name: device name specified in INDENTIFY fram
- * @boot_device: boot device object from bios page 2
- *
- * Returns 1 when there's a match, 0 means no match.
- */
-static inline int
-_scsih_srch_boot_device_name(u64 device_name,
- Mpi2BootDeviceDeviceName_t *boot_device)
-{
- return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
-}
-
-/**
- * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
- * @enclosure_logical_id: enclosure logical id
- * @slot_number: slot number
- * @boot_device: boot device object from bios page 2
- *
- * Returns 1 when there's a match, 0 means no match.
- */
-static inline int
-_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
- Mpi2BootDeviceEnclosureSlot_t *boot_device)
-{
- return (enclosure_logical_id == le64_to_cpu(boot_device->
- EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
- SlotNumber)) ? 1 : 0;
-}
-
-/**
- * _scsih_is_boot_device - search for matching boot device.
- * @sas_address: sas address
- * @device_name: device name specified in INDENTIFY fram
- * @enclosure_logical_id: enclosure logical id
- * @slot_number: slot number
- * @form: specifies boot device form
- * @boot_device: boot device object from bios page 2
- *
- * Returns 1 when there's a match, 0 means no match.
- */
-static int
-_scsih_is_boot_device(u64 sas_address, u64 device_name,
- u64 enclosure_logical_id, u16 slot, u8 form,
- Mpi2BiosPage2BootDevice_t *boot_device)
-{
- int rc = 0;
-
- switch (form) {
- case MPI2_BIOSPAGE2_FORM_SAS_WWID:
- if (!sas_address)
- break;
- rc = _scsih_srch_boot_sas_address(
- sas_address, &boot_device->SasWwid);
- break;
- case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
- if (!enclosure_logical_id)
- break;
- rc = _scsih_srch_boot_encl_slot(
- enclosure_logical_id,
- slot, &boot_device->EnclosureSlot);
- break;
- case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
- if (!device_name)
- break;
- rc = _scsih_srch_boot_device_name(
- device_name, &boot_device->DeviceName);
- break;
- case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
- break;
- }
-
- return rc;
-}
-
-/**
- * _scsih_get_sas_address - set the sas_address for given device handle
- * @handle: device handle
- * @sas_address: sas address
- *
- * Returns 0 success, non-zero when failure
- */
-static int
-_scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
- u64 *sas_address)
-{
- Mpi2SasDevicePage0_t sas_device_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u32 ioc_status;
- *sas_address = 0;
-
- if (handle <= ioc->sas_hba.num_phys) {
- *sas_address = ioc->sas_hba.sas_address;
- return 0;
- }
-
- if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__);
- return -ENXIO;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
- *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
- return 0;
- }
-
- /* we hit this becuase the given parent handle doesn't exist */
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- return -ENXIO;
- /* else error case */
- printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), "
- "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
- __FILE__, __LINE__, __func__);
- return -EIO;
-}
-
-/**
- * _scsih_determine_boot_device - determine boot device.
- * @ioc: per adapter object
- * @device: either sas_device or raid_device object
- * @is_raid: [flag] 1 = raid object, 0 = sas object
- *
- * Determines whether this device should be first reported device to
- * to scsi-ml or sas transport, this purpose is for persistent boot device.
- * There are primary, alternate, and current entries in bios page 2. The order
- * priority is primary, alternate, then current. This routine saves
- * the corresponding device object and is_raid flag in the ioc object.
- * The saved data to be used later in _scsih_probe_boot_devices().
- */
-static void
-_scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc,
- void *device, u8 is_raid)
-{
- struct _sas_device *sas_device;
- struct _raid_device *raid_device;
- u64 sas_address;
- u64 device_name;
- u64 enclosure_logical_id;
- u16 slot;
-
- /* only process this function when driver loads */
- if (!ioc->is_driver_loading)
- return;
-
- /* no Bios, return immediately */
- if (!ioc->bios_pg3.BiosVersion)
- return;
-
- if (!is_raid) {
- sas_device = device;
- sas_address = sas_device->sas_address;
- device_name = sas_device->device_name;
- enclosure_logical_id = sas_device->enclosure_logical_id;
- slot = sas_device->slot;
- } else {
- raid_device = device;
- sas_address = raid_device->wwid;
- device_name = 0;
- enclosure_logical_id = 0;
- slot = 0;
- }
-
- if (!ioc->req_boot_device.device) {
- if (_scsih_is_boot_device(sas_address, device_name,
- enclosure_logical_id, slot,
- (ioc->bios_pg2.ReqBootDeviceForm &
- MPI2_BIOSPAGE2_FORM_MASK),
- &ioc->bios_pg2.RequestedBootDevice)) {
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "%s: req_boot_device(0x%016llx)\n",
- ioc->name, __func__,
- (unsigned long long)sas_address));
- ioc->req_boot_device.device = device;
- ioc->req_boot_device.is_raid = is_raid;
- }
- }
-
- if (!ioc->req_alt_boot_device.device) {
- if (_scsih_is_boot_device(sas_address, device_name,
- enclosure_logical_id, slot,
- (ioc->bios_pg2.ReqAltBootDeviceForm &
- MPI2_BIOSPAGE2_FORM_MASK),
- &ioc->bios_pg2.RequestedAltBootDevice)) {
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "%s: req_alt_boot_device(0x%016llx)\n",
- ioc->name, __func__,
- (unsigned long long)sas_address));
- ioc->req_alt_boot_device.device = device;
- ioc->req_alt_boot_device.is_raid = is_raid;
- }
- }
-
- if (!ioc->current_boot_device.device) {
- if (_scsih_is_boot_device(sas_address, device_name,
- enclosure_logical_id, slot,
- (ioc->bios_pg2.CurrentBootDeviceForm &
- MPI2_BIOSPAGE2_FORM_MASK),
- &ioc->bios_pg2.CurrentBootDevice)) {
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "%s: current_boot_device(0x%016llx)\n",
- ioc->name, __func__,
- (unsigned long long)sas_address));
- ioc->current_boot_device.device = device;
- ioc->current_boot_device.is_raid = is_raid;
- }
- }
-}
-
-static struct _sas_device *
-__mpt2sas_get_sdev_from_target(struct MPT2SAS_ADAPTER *ioc,
- struct MPT2SAS_TARGET *tgt_priv)
-{
- struct _sas_device *ret;
-
- assert_spin_locked(&ioc->sas_device_lock);
-
- ret = tgt_priv->sdev;
- if (ret)
- sas_device_get(ret);
-
- return ret;
-}
-
-static struct _sas_device *
-mpt2sas_get_sdev_from_target(struct MPT2SAS_ADAPTER *ioc,
- struct MPT2SAS_TARGET *tgt_priv)
-{
- struct _sas_device *ret;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- ret = __mpt2sas_get_sdev_from_target(ioc, tgt_priv);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- return ret;
-}
-
-
-struct _sas_device *
-__mpt2sas_get_sdev_by_addr(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address)
-{
- struct _sas_device *sas_device;
-
- assert_spin_locked(&ioc->sas_device_lock);
-
- list_for_each_entry(sas_device, &ioc->sas_device_list, list)
- if (sas_device->sas_address == sas_address)
- goto found_device;
-
- list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
- if (sas_device->sas_address == sas_address)
- goto found_device;
-
- return NULL;
-
-found_device:
- sas_device_get(sas_device);
- return sas_device;
-}
-
-/**
- * mpt2sas_get_sdev_by_addr - sas device search
- * @ioc: per adapter object
- * @sas_address: sas address
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for sas_device based on sas_address, then return sas_device
- * object.
- */
-struct _sas_device *
-mpt2sas_get_sdev_by_addr(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address)
-{
- struct _sas_device *sas_device;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- sas_address);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- return sas_device;
-}
-
-static struct _sas_device *
-__mpt2sas_get_sdev_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_device *sas_device;
-
- assert_spin_locked(&ioc->sas_device_lock);
-
- list_for_each_entry(sas_device, &ioc->sas_device_list, list)
- if (sas_device->handle == handle)
- goto found_device;
-
- list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
- if (sas_device->handle == handle)
- goto found_device;
-
- return NULL;
-
-found_device:
- sas_device_get(sas_device);
- return sas_device;
-}
-
-/**
- * mpt2sas_get_sdev_by_handle - sas device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for sas_device based on sas_address, then return sas_device
- * object.
- */
-static struct _sas_device *
-mpt2sas_get_sdev_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_device *sas_device;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- return sas_device;
-}
-
-/**
- * _scsih_sas_device_remove - remove sas_device from list.
- * @ioc: per adapter object
- * @sas_device: the sas_device object
- * Context: This function will acquire ioc->sas_device_lock.
- *
- * If sas_device is on the list, remove it and decrement its reference count.
- */
-static void
-_scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_device *sas_device)
-{
- unsigned long flags;
-
- if (!sas_device)
- return;
-
- /*
- * The lock serializes access to the list, but we still need to verify
- * that nobody removed the entry while we were waiting on the lock.
- */
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- if (!list_empty(&sas_device->list)) {
- list_del_init(&sas_device->list);
- sas_device_put(sas_device);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-}
-
-
-/**
- * _scsih_sas_device_add - insert sas_device to the list.
- * @ioc: per adapter object
- * @sas_device: the sas_device object
- * Context: This function will acquire ioc->sas_device_lock.
- *
- * Adding new object to the ioc->sas_device_list.
- */
-static void
-_scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_device *sas_device)
-{
- unsigned long flags;
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
- "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
- sas_device->handle, (unsigned long long)sas_device->sas_address));
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device_get(sas_device);
- list_add_tail(&sas_device->list, &ioc->sas_device_list);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->sas_address_parent)) {
- _scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- /* When asyn scanning is enabled, its not possible to remove
- * devices while scanning is turned on due to an oops in
- * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
- */
- if (!ioc->is_driver_loading) {
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
- }
- }
-}
-
-/**
- * _scsih_sas_device_init_add - insert sas_device to the list.
- * @ioc: per adapter object
- * @sas_device: the sas_device object
- * Context: This function will acquire ioc->sas_device_lock.
- *
- * Adding new object at driver load time to the ioc->sas_device_init_list.
- */
-static void
-_scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_device *sas_device)
-{
- unsigned long flags;
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
- "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
- sas_device->handle, (unsigned long long)sas_device->sas_address));
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device_get(sas_device);
- list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
- _scsih_determine_boot_device(ioc, sas_device, 0);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-}
-
-/**
- * _scsih_raid_device_find_by_id - raid device search
- * @ioc: per adapter object
- * @id: sas device target id
- * @channel: sas device channel
- * Context: Calling function should acquire ioc->raid_device_lock
- *
- * This searches for raid_device based on target id, then return raid_device
- * object.
- */
-static struct _raid_device *
-_scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel)
-{
- struct _raid_device *raid_device, *r;
-
- r = NULL;
- list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
- if (raid_device->id == id && raid_device->channel == channel) {
- r = raid_device;
- goto out;
- }
- }
-
- out:
- return r;
-}
-
-/**
- * _scsih_raid_device_find_by_handle - raid device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->raid_device_lock
- *
- * This searches for raid_device based on handle, then return raid_device
- * object.
- */
-static struct _raid_device *
-_scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _raid_device *raid_device, *r;
-
- r = NULL;
- list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
- if (raid_device->handle != handle)
- continue;
- r = raid_device;
- goto out;
- }
-
- out:
- return r;
-}
-
-/**
- * _scsih_raid_device_find_by_wwid - raid device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->raid_device_lock
- *
- * This searches for raid_device based on wwid, then return raid_device
- * object.
- */
-static struct _raid_device *
-_scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid)
-{
- struct _raid_device *raid_device, *r;
-
- r = NULL;
- list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
- if (raid_device->wwid != wwid)
- continue;
- r = raid_device;
- goto out;
- }
-
- out:
- return r;
-}
-
-/**
- * _scsih_raid_device_add - add raid_device object
- * @ioc: per adapter object
- * @raid_device: raid_device object
- *
- * This is added to the raid_device_list link list.
- */
-static void
-_scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc,
- struct _raid_device *raid_device)
-{
- unsigned long flags;
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
- "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
- raid_device->handle, (unsigned long long)raid_device->wwid));
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- list_add_tail(&raid_device->list, &ioc->raid_device_list);
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-}
-
-/**
- * _scsih_raid_device_remove - delete raid_device object
- * @ioc: per adapter object
- * @raid_device: raid_device object
- *
- */
-static void
-_scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc,
- struct _raid_device *raid_device)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- list_del(&raid_device->list);
- kfree(raid_device);
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-}
-
-/**
- * mpt2sas_scsih_expander_find_by_handle - expander device search
- * @ioc: per adapter object
- * @handle: expander handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for expander device based on handle, then returns the
- * sas_node object.
- */
-struct _sas_node *
-mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_node *sas_expander, *r;
-
- r = NULL;
- list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
- if (sas_expander->handle != handle)
- continue;
- r = sas_expander;
- goto out;
- }
- out:
- return r;
-}
-
-/**
- * mpt2sas_scsih_expander_find_by_sas_address - expander device search
- * @ioc: per adapter object
- * @sas_address: sas address
- * Context: Calling function should acquire ioc->sas_node_lock.
- *
- * This searches for expander device based on sas_address, then returns the
- * sas_node object.
- */
-struct _sas_node *
-mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address)
-{
- struct _sas_node *sas_expander, *r;
-
- r = NULL;
- list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
- if (sas_expander->sas_address != sas_address)
- continue;
- r = sas_expander;
- goto out;
- }
- out:
- return r;
-}
-
-/**
- * _scsih_expander_node_add - insert expander device to the list.
- * @ioc: per adapter object
- * @sas_expander: the sas_device object
- * Context: This function will acquire ioc->sas_node_lock.
- *
- * Adding new object to the ioc->sas_expander_list.
- *
- * Return nothing.
- */
-static void
-_scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_node *sas_expander)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-}
-
-/**
- * _scsih_is_end_device - determines if device is an end device
- * @device_info: bitfield providing information about the device.
- * Context: none
- *
- * Returns 1 if end device.
- */
-static int
-_scsih_is_end_device(u32 device_info)
-{
- if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
- ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
- (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
- (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
- return 1;
- else
- return 0;
-}
-
-/**
- * _scsih_scsi_lookup_get - returns scmd entry
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns the smid stored scmd pointer.
- */
-static struct scsi_cmnd *
-_scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- return ioc->scsi_lookup[smid - 1].scmd;
-}
-
-/**
- * _scsih_scsi_lookup_get_clear - returns scmd entry
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns the smid stored scmd pointer.
- * Then will derefrence the stored scmd pointer.
- */
-static inline struct scsi_cmnd *
-_scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- unsigned long flags;
- struct scsi_cmnd *scmd;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- scmd = ioc->scsi_lookup[smid - 1].scmd;
- ioc->scsi_lookup[smid - 1].scmd = NULL;
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
- return scmd;
-}
-
-/**
- * _scsih_scsi_lookup_find_by_scmd - scmd lookup
- * @ioc: per adapter object
- * @smid: system request message index
- * @scmd: pointer to scsi command object
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * This will search for a scmd pointer in the scsi_lookup array,
- * returning the revelent smid. A returned value of zero means invalid.
- */
-static u16
-_scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd
- *scmd)
-{
- u16 smid;
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- smid = 0;
- for (i = 0; i < ioc->scsiio_depth; i++) {
- if (ioc->scsi_lookup[i].scmd == scmd) {
- smid = ioc->scsi_lookup[i].smid;
- goto out;
- }
- }
- out:
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return smid;
-}
-
-/**
- * _scsih_scsi_lookup_find_by_target - search for matching channel:id
- * @ioc: per adapter object
- * @id: target id
- * @channel: channel
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * This will search for a matching channel:id in the scsi_lookup array,
- * returning 1 if found.
- */
-static u8
-_scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id,
- int channel)
-{
- u8 found;
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- found = 0;
- for (i = 0 ; i < ioc->scsiio_depth; i++) {
- if (ioc->scsi_lookup[i].scmd &&
- (ioc->scsi_lookup[i].scmd->device->id == id &&
- ioc->scsi_lookup[i].scmd->device->channel == channel)) {
- found = 1;
- goto out;
- }
- }
- out:
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return found;
-}
-
-/**
- * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
- * @ioc: per adapter object
- * @id: target id
- * @lun: lun number
- * @channel: channel
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * This will search for a matching channel:id:lun in the scsi_lookup array,
- * returning 1 if found.
- */
-static u8
-_scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
- unsigned int lun, int channel)
-{
- u8 found;
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- found = 0;
- for (i = 0 ; i < ioc->scsiio_depth; i++) {
- if (ioc->scsi_lookup[i].scmd &&
- (ioc->scsi_lookup[i].scmd->device->id == id &&
- ioc->scsi_lookup[i].scmd->device->channel == channel &&
- ioc->scsi_lookup[i].scmd->device->lun == lun)) {
- found = 1;
- goto out;
- }
- }
- out:
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return found;
-}
-
-/**
- * _scsih_get_chain_buffer_tracker - obtain chain tracker
- * @ioc: per adapter object
- * @smid: smid associated to an IO request
- *
- * Returns chain tracker(from ioc->free_chain_list)
- */
-static struct chain_tracker *
-_scsih_get_chain_buffer_tracker(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- struct chain_tracker *chain_req;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- if (list_empty(&ioc->free_chain_list)) {
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT "chain buffers not "
- "available\n", ioc->name));
- return NULL;
- }
- chain_req = list_entry(ioc->free_chain_list.next,
- struct chain_tracker, tracker_list);
- list_del_init(&chain_req->tracker_list);
- list_add_tail(&chain_req->tracker_list,
- &ioc->scsi_lookup[smid - 1].chain_list);
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return chain_req;
-}
-
-/**
- * _scsih_build_scatter_gather - main sg creation routine
- * @ioc: per adapter object
- * @scmd: scsi command
- * @smid: system request message index
- * Context: none.
- *
- * The main routine that builds scatter gather table from a given
- * scsi request sent via the .queuecommand main handler.
- *
- * Returns 0 success, anything else error
- */
-static int
-_scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
- struct scsi_cmnd *scmd, u16 smid)
-{
- Mpi2SCSIIORequest_t *mpi_request;
- dma_addr_t chain_dma;
- struct scatterlist *sg_scmd;
- void *sg_local, *chain;
- u32 chain_offset;
- u32 chain_length;
- u32 chain_flags;
- int sges_left;
- u32 sges_in_segment;
- u32 sgl_flags;
- u32 sgl_flags_last_element;
- u32 sgl_flags_end_buffer;
- struct chain_tracker *chain_req;
-
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-
- /* init scatter gather flags */
- sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
- if (scmd->sc_data_direction == DMA_TO_DEVICE)
- sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
- sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
- << MPI2_SGE_FLAGS_SHIFT;
- sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
- MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
- << MPI2_SGE_FLAGS_SHIFT;
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-
- sg_scmd = scsi_sglist(scmd);
- sges_left = scsi_dma_map(scmd);
- if (sges_left < 0) {
- sdev_printk(KERN_ERR, scmd->device, "pci_map_sg"
- " failed: request for %d bytes!\n", scsi_bufflen(scmd));
- return -ENOMEM;
- }
-
- sg_local = &mpi_request->SGL;
- sges_in_segment = ioc->max_sges_in_main_message;
- if (sges_left <= sges_in_segment)
- goto fill_in_last_segment;
-
- mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
- (sges_in_segment * ioc->sge_size))/4;
-
- /* fill in main message segment when there is a chain following */
- while (sges_in_segment) {
- if (sges_in_segment == 1)
- ioc->base_add_sg_single(sg_local,
- sgl_flags_last_element | sg_dma_len(sg_scmd),
- sg_dma_address(sg_scmd));
- else
- ioc->base_add_sg_single(sg_local, sgl_flags |
- sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
- sg_scmd = sg_next(sg_scmd);
- sg_local += ioc->sge_size;
- sges_left--;
- sges_in_segment--;
- }
-
- /* initializing the chain flags and pointers */
- chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
- chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
- if (!chain_req)
- return -1;
- chain = chain_req->chain_buffer;
- chain_dma = chain_req->chain_buffer_dma;
- do {
- sges_in_segment = (sges_left <=
- ioc->max_sges_in_chain_message) ? sges_left :
- ioc->max_sges_in_chain_message;
- chain_offset = (sges_left == sges_in_segment) ?
- 0 : (sges_in_segment * ioc->sge_size)/4;
- chain_length = sges_in_segment * ioc->sge_size;
- if (chain_offset) {
- chain_offset = chain_offset <<
- MPI2_SGE_CHAIN_OFFSET_SHIFT;
- chain_length += ioc->sge_size;
- }
- ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
- chain_length, chain_dma);
- sg_local = chain;
- if (!chain_offset)
- goto fill_in_last_segment;
-
- /* fill in chain segments */
- while (sges_in_segment) {
- if (sges_in_segment == 1)
- ioc->base_add_sg_single(sg_local,
- sgl_flags_last_element |
- sg_dma_len(sg_scmd),
- sg_dma_address(sg_scmd));
- else
- ioc->base_add_sg_single(sg_local, sgl_flags |
- sg_dma_len(sg_scmd),
- sg_dma_address(sg_scmd));
- sg_scmd = sg_next(sg_scmd);
- sg_local += ioc->sge_size;
- sges_left--;
- sges_in_segment--;
- }
-
- chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
- if (!chain_req)
- return -1;
- chain = chain_req->chain_buffer;
- chain_dma = chain_req->chain_buffer_dma;
- } while (1);
-
-
- fill_in_last_segment:
-
- /* fill the last segment */
- while (sges_left) {
- if (sges_left == 1)
- ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
- sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
- else
- ioc->base_add_sg_single(sg_local, sgl_flags |
- sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
- sg_scmd = sg_next(sg_scmd);
- sg_local += ioc->sge_size;
- sges_left--;
- }
-
- return 0;
-}
-
-/**
- * _scsih_change_queue_depth - setting device queue depth
- * @sdev: scsi device struct
- * @qdepth: requested queue depth
- *
- * Returns queue depth.
- */
-static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
-{
- struct Scsi_Host *shost = sdev->host;
- int max_depth;
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct _sas_device *sas_device;
- unsigned long flags;
-
- max_depth = shost->can_queue;
-
- /* limit max device queue for SATA to 32 */
- sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
- goto not_sata;
- sas_target_priv_data = sas_device_priv_data->sas_target;
- if (!sas_target_priv_data)
- goto not_sata;
- if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
- goto not_sata;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_from_target(ioc, sas_target_priv_data);
- if (sas_device) {
- if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
- max_depth = MPT2SAS_SATA_QUEUE_DEPTH;
-
- sas_device_put(sas_device);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- not_sata:
- if (!sdev->tagged_supported)
- max_depth = 1;
- if (qdepth > max_depth)
- qdepth = max_depth;
- return scsi_change_queue_depth(sdev, qdepth);
-}
-
-/**
- * _scsih_target_alloc - target add routine
- * @starget: scsi target struct
- *
- * Returns 0 if ok. Any other return is assumed to be an error and
- * the device is ignored.
- */
-static int
-_scsih_target_alloc(struct scsi_target *starget)
-{
- struct Scsi_Host *shost = dev_to_shost(&starget->dev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct _sas_device *sas_device;
- struct _raid_device *raid_device;
- unsigned long flags;
- struct sas_rphy *rphy;
-
- sas_target_priv_data = kzalloc(sizeof(*sas_target_priv_data),
- GFP_KERNEL);
- if (!sas_target_priv_data)
- return -ENOMEM;
-
- starget->hostdata = sas_target_priv_data;
- sas_target_priv_data->starget = starget;
- sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
-
- /* RAID volumes */
- if (starget->channel == RAID_CHANNEL) {
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
- starget->channel);
- if (raid_device) {
- sas_target_priv_data->handle = raid_device->handle;
- sas_target_priv_data->sas_address = raid_device->wwid;
- sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
- if (ioc->is_warpdrive)
- sas_target_priv_data->raid_device = raid_device;
- raid_device->starget = starget;
- }
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- return 0;
- }
-
- /* sas/sata devices */
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- rphy = dev_to_rphy(starget->dev.parent);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- rphy->identify.sas_address);
-
- if (sas_device) {
- sas_target_priv_data->handle = sas_device->handle;
- sas_target_priv_data->sas_address = sas_device->sas_address;
- sas_target_priv_data->sdev = sas_device;
- sas_device->starget = starget;
- sas_device->id = starget->id;
- sas_device->channel = starget->channel;
- if (test_bit(sas_device->handle, ioc->pd_handles))
- sas_target_priv_data->flags |=
- MPT_TARGET_FLAGS_RAID_COMPONENT;
-
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- return 0;
-}
-
-/**
- * _scsih_target_destroy - target destroy routine
- * @starget: scsi target struct
- *
- * Returns nothing.
- */
-static void
-_scsih_target_destroy(struct scsi_target *starget)
-{
- struct Scsi_Host *shost = dev_to_shost(&starget->dev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct _sas_device *sas_device;
- struct _raid_device *raid_device;
- unsigned long flags;
- struct sas_rphy *rphy;
-
- sas_target_priv_data = starget->hostdata;
- if (!sas_target_priv_data)
- return;
-
- if (starget->channel == RAID_CHANNEL) {
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
- starget->channel);
- if (raid_device) {
- raid_device->starget = NULL;
- raid_device->sdev = NULL;
- }
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- goto out;
- }
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- rphy = dev_to_rphy(starget->dev.parent);
- sas_device = __mpt2sas_get_sdev_from_target(ioc, sas_target_priv_data);
- if (sas_device && (sas_device->starget == starget) &&
- (sas_device->id == starget->id) &&
- (sas_device->channel == starget->channel))
- sas_device->starget = NULL;
-
- if (sas_device) {
- /*
- * Corresponding get() is in _scsih_target_alloc()
- */
- sas_target_priv_data->sdev = NULL;
- sas_device_put(sas_device);
-
- sas_device_put(sas_device);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- out:
- kfree(sas_target_priv_data);
- starget->hostdata = NULL;
-}
-
-/**
- * _scsih_slave_alloc - device add routine
- * @sdev: scsi device struct
- *
- * Returns 0 if ok. Any other return is assumed to be an error and
- * the device is ignored.
- */
-static int
-_scsih_slave_alloc(struct scsi_device *sdev)
-{
- struct Scsi_Host *shost;
- struct MPT2SAS_ADAPTER *ioc;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct scsi_target *starget;
- struct _raid_device *raid_device;
- struct _sas_device *sas_device;
- unsigned long flags;
-
- sas_device_priv_data = kzalloc(sizeof(*sas_device_priv_data),
- GFP_KERNEL);
- if (!sas_device_priv_data)
- return -ENOMEM;
-
- sas_device_priv_data->lun = sdev->lun;
- sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
-
- starget = scsi_target(sdev);
- sas_target_priv_data = starget->hostdata;
- sas_target_priv_data->num_luns++;
- sas_device_priv_data->sas_target = sas_target_priv_data;
- sdev->hostdata = sas_device_priv_data;
- if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
- sdev->no_uld_attach = 1;
-
- shost = dev_to_shost(&starget->dev);
- ioc = shost_priv(shost);
- if (starget->channel == RAID_CHANNEL) {
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_id(ioc,
- starget->id, starget->channel);
- if (raid_device)
- raid_device->sdev = sdev; /* raid is single lun */
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- }
-
- if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- sas_target_priv_data->sas_address);
- if (sas_device && (sas_device->starget == NULL)) {
- sdev_printk(KERN_INFO, sdev,
- "%s : sas_device->starget set to starget @ %d\n",
- __func__, __LINE__);
- sas_device->starget = starget;
- }
-
- if (sas_device)
- sas_device_put(sas_device);
-
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- }
-
- return 0;
-}
-
-/**
- * _scsih_slave_destroy - device destroy routine
- * @sdev: scsi device struct
- *
- * Returns nothing.
- */
-static void
-_scsih_slave_destroy(struct scsi_device *sdev)
-{
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct scsi_target *starget;
- struct Scsi_Host *shost;
- struct MPT2SAS_ADAPTER *ioc;
- struct _sas_device *sas_device;
- unsigned long flags;
-
- if (!sdev->hostdata)
- return;
-
- starget = scsi_target(sdev);
- sas_target_priv_data = starget->hostdata;
- sas_target_priv_data->num_luns--;
-
- shost = dev_to_shost(&starget->dev);
- ioc = shost_priv(shost);
-
- if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_from_target(ioc,
- sas_target_priv_data);
- if (sas_device && !sas_target_priv_data->num_luns)
- sas_device->starget = NULL;
-
- if (sas_device)
- sas_device_put(sas_device);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- }
-
- kfree(sdev->hostdata);
- sdev->hostdata = NULL;
-}
-
-/**
- * _scsih_display_sata_capabilities - sata capabilities
- * @ioc: per adapter object
- * @handle: device handle
- * @sdev: scsi device struct
- */
-static void
-_scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
- u16 handle, struct scsi_device *sdev)
-{
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasDevicePage0_t sas_device_pg0;
- u32 ioc_status;
- u16 flags;
- u32 device_info;
-
- if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- flags = le16_to_cpu(sas_device_pg0.Flags);
- device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
-
- sdev_printk(KERN_INFO, sdev,
- "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
- "sw_preserve(%s)\n",
- (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
- (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
- (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
- "n",
- (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
- (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
- (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
-}
-
-/**
- * _scsih_is_raid - return boolean indicating device is raid volume
- * @dev the device struct object
- */
-static int
-_scsih_is_raid(struct device *dev)
-{
- struct scsi_device *sdev = to_scsi_device(dev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
-
- if (ioc->is_warpdrive)
- return 0;
- return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
-}
-
-/**
- * _scsih_get_resync - get raid volume resync percent complete
- * @dev the device struct object
- */
-static void
-_scsih_get_resync(struct device *dev)
-{
- struct scsi_device *sdev = to_scsi_device(dev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
- static struct _raid_device *raid_device;
- unsigned long flags;
- Mpi2RaidVolPage0_t vol_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u32 volume_status_flags;
- u8 percent_complete;
- u16 handle;
-
- percent_complete = 0;
- handle = 0;
- if (ioc->is_warpdrive)
- goto out;
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
- sdev->channel);
- if (raid_device) {
- handle = raid_device->handle;
- percent_complete = raid_device->percent_complete;
- }
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-
- if (!handle)
- goto out;
-
- if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
- MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
- sizeof(Mpi2RaidVolPage0_t))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- percent_complete = 0;
- goto out;
- }
-
- volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
- if (!(volume_status_flags &
- MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS))
- percent_complete = 0;
-
- out:
- raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
-}
-
-/**
- * _scsih_get_state - get raid volume level
- * @dev the device struct object
- */
-static void
-_scsih_get_state(struct device *dev)
-{
- struct scsi_device *sdev = to_scsi_device(dev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
- static struct _raid_device *raid_device;
- unsigned long flags;
- Mpi2RaidVolPage0_t vol_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u32 volstate;
- enum raid_state state = RAID_STATE_UNKNOWN;
- u16 handle = 0;
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
- sdev->channel);
- if (raid_device)
- handle = raid_device->handle;
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-
- if (!raid_device)
- goto out;
-
- if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
- MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
- sizeof(Mpi2RaidVolPage0_t))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
-
- volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
- if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
- state = RAID_STATE_RESYNCING;
- goto out;
- }
-
- switch (vol_pg0.VolumeState) {
- case MPI2_RAID_VOL_STATE_OPTIMAL:
- case MPI2_RAID_VOL_STATE_ONLINE:
- state = RAID_STATE_ACTIVE;
- break;
- case MPI2_RAID_VOL_STATE_DEGRADED:
- state = RAID_STATE_DEGRADED;
- break;
- case MPI2_RAID_VOL_STATE_FAILED:
- case MPI2_RAID_VOL_STATE_MISSING:
- state = RAID_STATE_OFFLINE;
- break;
- }
- out:
- raid_set_state(mpt2sas_raid_template, dev, state);
-}
-
-/**
- * _scsih_set_level - set raid level
- * @sdev: scsi device struct
- * @volume_type: volume type
- */
-static void
-_scsih_set_level(struct scsi_device *sdev, u8 volume_type)
-{
- enum raid_level level = RAID_LEVEL_UNKNOWN;
-
- switch (volume_type) {
- case MPI2_RAID_VOL_TYPE_RAID0:
- level = RAID_LEVEL_0;
- break;
- case MPI2_RAID_VOL_TYPE_RAID10:
- level = RAID_LEVEL_10;
- break;
- case MPI2_RAID_VOL_TYPE_RAID1E:
- level = RAID_LEVEL_1E;
- break;
- case MPI2_RAID_VOL_TYPE_RAID1:
- level = RAID_LEVEL_1;
- break;
- }
-
- raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level);
-}
-
-/**
- * _scsih_get_volume_capabilities - volume capabilities
- * @ioc: per adapter object
- * @sas_device: the raid_device object
- *
- * Returns 0 for success, else 1
- */
-static int
-_scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
- struct _raid_device *raid_device)
-{
- Mpi2RaidVolPage0_t *vol_pg0;
- Mpi2RaidPhysDiskPage0_t pd_pg0;
- Mpi2SasDevicePage0_t sas_device_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u16 sz;
- u8 num_pds;
-
- if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
- &num_pds)) || !num_pds) {
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
- "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
- __func__));
- return 1;
- }
-
- raid_device->num_pds = num_pds;
- sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
- sizeof(Mpi2RaidVol0PhysDisk_t));
- vol_pg0 = kzalloc(sz, GFP_KERNEL);
- if (!vol_pg0) {
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
- "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
- __func__));
- return 1;
- }
-
- if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
- MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
- "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
- __func__));
- kfree(vol_pg0);
- return 1;
- }
-
- raid_device->volume_type = vol_pg0->VolumeType;
-
- /* figure out what the underlying devices are by
- * obtaining the device_info bits for the 1st device
- */
- if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
- &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
- vol_pg0->PhysDisk[0].PhysDiskNum))) {
- if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
- &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
- le16_to_cpu(pd_pg0.DevHandle)))) {
- raid_device->device_info =
- le32_to_cpu(sas_device_pg0.DeviceInfo);
- }
- }
-
- kfree(vol_pg0);
- return 0;
-}
-/**
- * _scsih_disable_ddio - Disable direct I/O for all the volumes
- * @ioc: per adapter object
- */
-static void
-_scsih_disable_ddio(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2RaidVolPage1_t vol_pg1;
- Mpi2ConfigReply_t mpi_reply;
- struct _raid_device *raid_device;
- u16 handle;
- u16 ioc_status;
- unsigned long flags;
-
- handle = 0xFFFF;
- while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
- &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
- handle = le16_to_cpu(vol_pg1.DevHandle);
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
- if (raid_device)
- raid_device->direct_io_enabled = 0;
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- }
- return;
-}
-
-
-/**
- * _scsih_get_num_volumes - Get number of volumes in the ioc
- * @ioc: per adapter object
- */
-static u8
-_scsih_get_num_volumes(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2RaidVolPage1_t vol_pg1;
- Mpi2ConfigReply_t mpi_reply;
- u16 handle;
- u8 vol_cnt = 0;
- u16 ioc_status;
-
- handle = 0xFFFF;
- while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
- &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
- vol_cnt++;
- handle = le16_to_cpu(vol_pg1.DevHandle);
- }
- return vol_cnt;
-}
-
-
-/**
- * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O.
- * @ioc: per adapter object
- * @raid_device: the raid_device object
- */
-static void
-_scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc,
- struct _raid_device *raid_device)
-{
- Mpi2RaidVolPage0_t *vol_pg0;
- Mpi2RaidPhysDiskPage0_t pd_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u16 sz;
- u8 num_pds, count;
- unsigned long stripe_sz, block_sz;
- u8 stripe_exp, block_exp;
- u64 dev_max_lba;
-
- if (!ioc->is_warpdrive)
- return;
-
- if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
- "globally as drives are exposed\n", ioc->name);
- return;
- }
- if (_scsih_get_num_volumes(ioc) > 1) {
- _scsih_disable_ddio(ioc);
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
- "globally as number of drives > 1\n", ioc->name);
- return;
- }
- if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
- &num_pds)) || !num_pds) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
- "Failure in computing number of drives\n", ioc->name);
- return;
- }
-
- sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
- sizeof(Mpi2RaidVol0PhysDisk_t));
- vol_pg0 = kzalloc(sz, GFP_KERNEL);
- if (!vol_pg0) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
- "Memory allocation failure for RVPG0\n", ioc->name);
- return;
- }
-
- if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
- MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
- "Failure in retrieving RVPG0\n", ioc->name);
- kfree(vol_pg0);
- return;
- }
-
- /*
- * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
- * assumed for WARPDRIVE, disable direct I/O
- */
- if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
- printk(MPT2SAS_WARN_FMT "WarpDrive : Direct IO is disabled "
- "for the drive with handle(0x%04x): num_mem=%d, "
- "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
- num_pds, MPT_MAX_WARPDRIVE_PDS);
- kfree(vol_pg0);
- return;
- }
- for (count = 0; count < num_pds; count++) {
- if (mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
- &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
- vol_pg0->PhysDisk[count].PhysDiskNum) ||
- le16_to_cpu(pd_pg0.DevHandle) ==
- MPT2SAS_INVALID_DEVICE_HANDLE) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is "
- "disabled for the drive with handle(0x%04x) member"
- "handle retrieval failed for member number=%d\n",
- ioc->name, raid_device->handle,
- vol_pg0->PhysDisk[count].PhysDiskNum);
- goto out_error;
- }
- /* Disable direct I/O if member drive lba exceeds 4 bytes */
- dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
- if (dev_max_lba >> 32) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is "
- "disabled for the drive with handle(0x%04x) member"
- "handle (0x%04x) unsupported max lba 0x%016llx\n",
- ioc->name, raid_device->handle,
- le16_to_cpu(pd_pg0.DevHandle),
- (unsigned long long)dev_max_lba);
- goto out_error;
- }
-
- raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
- }
-
- /*
- * Assumption for WD: Direct I/O is not supported if the volume is
- * not RAID0
- */
- if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
- "for the drive with handle(0x%04x): type=%d, "
- "s_sz=%uK, blk_size=%u\n", ioc->name,
- raid_device->handle, raid_device->volume_type,
- (le32_to_cpu(vol_pg0->StripeSize) *
- le16_to_cpu(vol_pg0->BlockSize)) / 1024,
- le16_to_cpu(vol_pg0->BlockSize));
- goto out_error;
- }
-
- stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
- stripe_exp = find_first_bit(&stripe_sz, 32);
- if (stripe_exp == 32) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
- "for the drive with handle(0x%04x) invalid stripe sz %uK\n",
- ioc->name, raid_device->handle,
- (le32_to_cpu(vol_pg0->StripeSize) *
- le16_to_cpu(vol_pg0->BlockSize)) / 1024);
- goto out_error;
- }
- raid_device->stripe_exponent = stripe_exp;
- block_sz = le16_to_cpu(vol_pg0->BlockSize);
- block_exp = find_first_bit(&block_sz, 16);
- if (block_exp == 16) {
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
- "for the drive with handle(0x%04x) invalid block sz %u\n",
- ioc->name, raid_device->handle,
- le16_to_cpu(vol_pg0->BlockSize));
- goto out_error;
- }
- raid_device->block_exponent = block_exp;
- raid_device->direct_io_enabled = 1;
-
- printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive"
- " with handle(0x%04x)\n", ioc->name, raid_device->handle);
- /*
- * WARPDRIVE: Though the following fields are not used for direct IO,
- * stored for future purpose:
- */
- raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
- raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
- raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
-
-
- kfree(vol_pg0);
- return;
-
-out_error:
- raid_device->direct_io_enabled = 0;
- for (count = 0; count < num_pds; count++)
- raid_device->pd_handle[count] = 0;
- kfree(vol_pg0);
- return;
-}
-
-/**
- * _scsih_enable_tlr - setting TLR flags
- * @ioc: per adapter object
- * @sdev: scsi device struct
- *
- * Enabling Transaction Layer Retries for tape devices when
- * vpd page 0x90 is present
- *
- */
-static void
-_scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev)
-{
- /* only for TAPE */
- if (sdev->type != TYPE_TAPE)
- return;
-
- if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
- return;
-
- sas_enable_tlr(sdev);
- sdev_printk(KERN_INFO, sdev, "TLR %s\n",
- sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
- return;
-
-}
-
-/**
- * _scsih_slave_configure - device configure routine.
- * @sdev: scsi device struct
- *
- * Returns 0 if ok. Any other return is assumed to be an error and
- * the device is ignored.
- */
-static int
-_scsih_slave_configure(struct scsi_device *sdev)
-{
- struct Scsi_Host *shost = sdev->host;
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct _sas_device *sas_device;
- struct _raid_device *raid_device;
- unsigned long flags;
- int qdepth;
- u8 ssp_target = 0;
- char *ds = "";
- char *r_level = "";
- u16 handle, volume_handle = 0;
- u64 volume_wwid = 0;
-
- qdepth = 1;
- sas_device_priv_data = sdev->hostdata;
- sas_device_priv_data->configured_lun = 1;
- sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
- sas_target_priv_data = sas_device_priv_data->sas_target;
- handle = sas_target_priv_data->handle;
-
- /* raid volume handling */
- if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- if (!raid_device) {
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
- "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
- __LINE__, __func__));
- return 1;
- }
-
- if (_scsih_get_volume_capabilities(ioc, raid_device)) {
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
- "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
- __LINE__, __func__));
- return 1;
- }
- /*
- * WARPDRIVE: Initialize the required data for Direct IO
- */
- _scsih_init_warpdrive_properties(ioc, raid_device);
-
- /* RAID Queue Depth Support
- * IS volume = underlying qdepth of drive type, either
- * MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH
- * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH)
- */
- if (raid_device->device_info &
- MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
- qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
- ds = "SSP";
- } else {
- qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
- if (raid_device->device_info &
- MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
- ds = "SATA";
- else
- ds = "STP";
- }
-
- switch (raid_device->volume_type) {
- case MPI2_RAID_VOL_TYPE_RAID0:
- r_level = "RAID0";
- break;
- case MPI2_RAID_VOL_TYPE_RAID1E:
- qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
- if (ioc->manu_pg10.OEMIdentifier &&
- (le32_to_cpu(ioc->manu_pg10.GenericFlags0) &
- MFG10_GF0_R10_DISPLAY) &&
- !(raid_device->num_pds % 2))
- r_level = "RAID10";
- else
- r_level = "RAID1E";
- break;
- case MPI2_RAID_VOL_TYPE_RAID1:
- qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
- r_level = "RAID1";
- break;
- case MPI2_RAID_VOL_TYPE_RAID10:
- qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
- r_level = "RAID10";
- break;
- case MPI2_RAID_VOL_TYPE_UNKNOWN:
- default:
- qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
- r_level = "RAIDX";
- break;
- }
-
- if (!ioc->hide_ir_msg)
- sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
- "wwid(0x%016llx), pd_count(%d), type(%s)\n",
- r_level, raid_device->handle,
- (unsigned long long)raid_device->wwid,
- raid_device->num_pds, ds);
- _scsih_change_queue_depth(sdev, qdepth);
- /* raid transport support */
- if (!ioc->is_warpdrive)
- _scsih_set_level(sdev, raid_device->volume_type);
- return 0;
- }
-
- /* non-raid handling */
- if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
- if (mpt2sas_config_get_volume_handle(ioc, handle,
- &volume_handle)) {
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
- "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__));
- return 1;
- }
- if (volume_handle && mpt2sas_config_get_volume_wwid(ioc,
- volume_handle, &volume_wwid)) {
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
- "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__));
- return 1;
- }
- }
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- sas_device_priv_data->sas_target->sas_address);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
- "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
- __LINE__, __func__));
- return 1;
- }
- sas_device->volume_handle = volume_handle;
- sas_device->volume_wwid = volume_wwid;
- if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
- qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
- ssp_target = 1;
- ds = "SSP";
- } else {
- qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
- if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
- ds = "STP";
- else if (sas_device->device_info &
- MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
- ds = "SATA";
- }
- sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
- "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
- ds, sas_device->handle,
- (unsigned long long)sas_device->sas_address,
- sas_device->phy,
- (unsigned long long)sas_device->device_name);
- sdev_printk(KERN_INFO, sdev, "%s: "
- "enclosure_logical_id(0x%016llx), slot(%d)\n", ds,
- (unsigned long long) sas_device->enclosure_logical_id,
- sas_device->slot);
-
- sas_device_put(sas_device);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (!ssp_target)
- _scsih_display_sata_capabilities(ioc, handle, sdev);
-
- _scsih_change_queue_depth(sdev, qdepth);
-
- if (ssp_target) {
- sas_read_port_mode_page(sdev);
- _scsih_enable_tlr(ioc, sdev);
- }
-
- return 0;
-}
-
-/**
- * _scsih_bios_param - fetch head, sector, cylinder info for a disk
- * @sdev: scsi device struct
- * @bdev: pointer to block device context
- * @capacity: device size (in 512 byte sectors)
- * @params: three element array to place output:
- * params[0] number of heads (max 255)
- * params[1] number of sectors (max 63)
- * params[2] number of cylinders
- *
- * Return nothing.
- */
-static int
-_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int params[])
-{
- int heads;
- int sectors;
- sector_t cylinders;
- ulong dummy;
-
- heads = 64;
- sectors = 32;
-
- dummy = heads * sectors;
- cylinders = capacity;
- sector_div(cylinders, dummy);
-
- /*
- * Handle extended translation size for logical drives
- * > 1Gb
- */
- if ((ulong)capacity >= 0x200000) {
- heads = 255;
- sectors = 63;
- dummy = heads * sectors;
- cylinders = capacity;
- sector_div(cylinders, dummy);
- }
-
- /* return result */
- params[0] = heads;
- params[1] = sectors;
- params[2] = cylinders;
-
- return 0;
-}
-
-/**
- * _scsih_response_code - translation of device response code
- * @ioc: per adapter object
- * @response_code: response code returned by the device
- *
- * Return nothing.
- */
-static void
-_scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
-{
- char *desc;
-
- switch (response_code) {
- case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
- desc = "task management request completed";
- break;
- case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
- desc = "invalid frame";
- break;
- case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
- desc = "task management request not supported";
- break;
- case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
- desc = "task management request failed";
- break;
- case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
- desc = "task management request succeeded";
- break;
- case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
- desc = "invalid lun";
- break;
- case 0xA:
- desc = "overlapped tag attempted";
- break;
- case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
- desc = "task queued, however not sent to target";
- break;
- default:
- desc = "unknown";
- break;
- }
- printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n",
- ioc->name, response_code, desc);
-}
-
-/**
- * _scsih_tm_done - tm completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: none.
- *
- * The callback handler when using scsih_issue_tm.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-static u8
-_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
-{
- MPI2DefaultReply_t *mpi_reply;
-
- if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED)
- return 1;
- if (ioc->tm_cmds.smid != smid)
- return 1;
- mpt2sas_base_flush_reply_queues(ioc);
- ioc->tm_cmds.status |= MPT2_CMD_COMPLETE;
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (mpi_reply) {
- memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
- ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID;
- }
- ioc->tm_cmds.status &= ~MPT2_CMD_PENDING;
- complete(&ioc->tm_cmds.done);
- return 1;
-}
-
-/**
- * mpt2sas_scsih_set_tm_flag - set per target tm_busy
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During taskmangement request, we need to freeze the device queue.
- */
-void
-mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct scsi_device *sdev;
- u8 skip = 0;
-
- shost_for_each_device(sdev, ioc->shost) {
- if (skip)
- continue;
- sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
- continue;
- if (sas_device_priv_data->sas_target->handle == handle) {
- sas_device_priv_data->sas_target->tm_busy = 1;
- skip = 1;
- ioc->ignore_loginfos = 1;
- }
- }
-}
-
-/**
- * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During taskmangement request, we need to freeze the device queue.
- */
-void
-mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct scsi_device *sdev;
- u8 skip = 0;
-
- shost_for_each_device(sdev, ioc->shost) {
- if (skip)
- continue;
- sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
- continue;
- if (sas_device_priv_data->sas_target->handle == handle) {
- sas_device_priv_data->sas_target->tm_busy = 0;
- skip = 1;
- ioc->ignore_loginfos = 0;
- }
- }
-}
-
-
-/**
- * mpt2sas_scsih_issue_tm - main routine for sending tm requests
- * @ioc: per adapter struct
- * @device_handle: device handle
- * @channel: the channel assigned by the OS
- * @id: the id assigned by the OS
- * @lun: lun number
- * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
- * @smid_task: smid assigned to the task
- * @timeout: timeout in seconds
- * @m_type: TM_MUTEX_ON or TM_MUTEX_OFF
- * Context: user
- *
- * A generic API for sending task management requests to firmware.
- *
- * The callback index is set inside `ioc->tm_cb_idx`.
- *
- * Return SUCCESS or FAILED.
- */
-int
-mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint channel,
- uint id, uint lun, u8 type, u16 smid_task, ulong timeout,
- enum mutex_type m_type)
-{
- Mpi2SCSITaskManagementRequest_t *mpi_request;
- Mpi2SCSITaskManagementReply_t *mpi_reply;
- u16 smid = 0;
- u32 ioc_state;
- unsigned long timeleft;
- struct scsiio_tracker *scsi_lookup = NULL;
- int rc;
-
- if (m_type == TM_MUTEX_ON)
- mutex_lock(&ioc->tm_cmds.mutex);
- if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n",
- __func__, ioc->name);
- rc = FAILED;
- goto err_out;
- }
-
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
- __func__, ioc->name);
- rc = FAILED;
- goto err_out;
- }
-
- ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
- if (ioc_state & MPI2_DOORBELL_USED) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
- "active!\n", ioc->name));
- rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- rc = (!rc) ? SUCCESS : FAILED;
- goto err_out;
- }
-
- if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
- mpt2sas_base_fault_info(ioc, ioc_state &
- MPI2_DOORBELL_DATA_MASK);
- rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- rc = (!rc) ? SUCCESS : FAILED;
- goto err_out;
- }
-
- smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = FAILED;
- goto err_out;
- }
-
- if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
- scsi_lookup = &ioc->scsi_lookup[smid_task - 1];
-
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x),"
- " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type,
- smid_task));
- ioc->tm_cmds.status = MPT2_CMD_PENDING;
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->tm_cmds.smid = smid;
- memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
- memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t));
- mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
- mpi_request->DevHandle = cpu_to_le16(handle);
- mpi_request->TaskType = type;
- mpi_request->TaskMID = cpu_to_le16(smid_task);
- int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
- mpt2sas_scsih_set_tm_flag(ioc, handle);
- init_completion(&ioc->tm_cmds.done);
- mpt2sas_base_put_smid_hi_priority(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
- if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2SCSITaskManagementRequest_t)/4);
- if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) {
- rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- rc = (!rc) ? SUCCESS : FAILED;
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
- mpt2sas_scsih_clear_tm_flag(ioc, handle);
- goto err_out;
- }
- }
-
- if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) {
- mpi_reply = ioc->tm_cmds.reply;
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: "
- "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
- ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo),
- le32_to_cpu(mpi_reply->TerminationCount)));
- if (ioc->logging_level & MPT_DEBUG_TM) {
- _scsih_response_code(ioc, mpi_reply->ResponseCode);
- if (mpi_reply->IOCStatus)
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2SCSITaskManagementRequest_t)/4);
- }
- }
-
- switch (type) {
- case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
- rc = SUCCESS;
- if (scsi_lookup->scmd == NULL)
- break;
- rc = FAILED;
- break;
-
- case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
- if (_scsih_scsi_lookup_find_by_target(ioc, id, channel))
- rc = FAILED;
- else
- rc = SUCCESS;
- break;
-
- case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET:
- case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET:
- if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel))
- rc = FAILED;
- else
- rc = SUCCESS;
- break;
- case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK:
- rc = SUCCESS;
- break;
- default:
- rc = FAILED;
- break;
- }
-
- mpt2sas_scsih_clear_tm_flag(ioc, handle);
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
- if (m_type == TM_MUTEX_ON)
- mutex_unlock(&ioc->tm_cmds.mutex);
-
- return rc;
-
- err_out:
- if (m_type == TM_MUTEX_ON)
- mutex_unlock(&ioc->tm_cmds.mutex);
- return rc;
-}
-
-/**
- * _scsih_tm_display_info - displays info about the device
- * @ioc: per adapter struct
- * @scmd: pointer to scsi command object
- *
- * Called by task management callback handlers.
- */
-static void
-_scsih_tm_display_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
-{
- struct scsi_target *starget = scmd->device->sdev_target;
- struct MPT2SAS_TARGET *priv_target = starget->hostdata;
- struct _sas_device *sas_device = NULL;
- unsigned long flags;
- char *device_str = NULL;
-
- if (!priv_target)
- return;
- if (ioc->hide_ir_msg)
- device_str = "WarpDrive";
- else
- device_str = "volume";
-
- scsi_print_command(scmd);
- if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
- starget_printk(KERN_INFO, starget, "%s handle(0x%04x), "
- "%s wwid(0x%016llx)\n", device_str, priv_target->handle,
- device_str, (unsigned long long)priv_target->sas_address);
- } else {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_from_target(ioc, priv_target);
- if (sas_device) {
- if (priv_target->flags &
- MPT_TARGET_FLAGS_RAID_COMPONENT) {
- starget_printk(KERN_INFO, starget,
- "volume handle(0x%04x), "
- "volume wwid(0x%016llx)\n",
- sas_device->volume_handle,
- (unsigned long long)sas_device->volume_wwid);
- }
- starget_printk(KERN_INFO, starget,
- "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
- sas_device->handle,
- (unsigned long long)sas_device->sas_address,
- sas_device->phy);
- starget_printk(KERN_INFO, starget,
- "enclosure_logical_id(0x%016llx), slot(%d)\n",
- (unsigned long long)sas_device->enclosure_logical_id,
- sas_device->slot);
-
- sas_device_put(sas_device);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- }
-}
-
-/**
- * _scsih_abort - eh threads main abort routine
- * @scmd: pointer to scsi command object
- *
- * Returns SUCCESS if command aborted else FAILED
- */
-static int
-_scsih_abort(struct scsi_cmnd *scmd)
-{
- struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- u16 smid;
- u16 handle;
- int r;
-
- sdev_printk(KERN_INFO, scmd->device, "attempting task abort! "
- "scmd(%p)\n", scmd);
- _scsih_tm_display_info(ioc, scmd);
-
- sas_device_priv_data = scmd->device->hostdata;
- if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
- sdev_printk(KERN_INFO, scmd->device, "device been deleted! "
- "scmd(%p)\n", scmd);
- scmd->result = DID_NO_CONNECT << 16;
- scmd->scsi_done(scmd);
- r = SUCCESS;
- goto out;
- }
-
- /* search for the command */
- smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd);
- if (!smid) {
- scmd->result = DID_RESET << 16;
- r = SUCCESS;
- goto out;
- }
-
- /* for hidden raid components and volumes this is not supported */
- if (sas_device_priv_data->sas_target->flags &
- MPT_TARGET_FLAGS_RAID_COMPONENT ||
- sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
- scmd->result = DID_RESET << 16;
- r = FAILED;
- goto out;
- }
-
- mpt2sas_halt_firmware(ioc);
-
- handle = sas_device_priv_data->sas_target->handle;
- r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
- scmd->device->id, scmd->device->lun,
- MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, TM_MUTEX_ON);
-
- out:
- sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
- ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
- return r;
-}
-
-/**
- * _scsih_dev_reset - eh threads main device reset routine
- * @scmd: pointer to scsi command object
- *
- * Returns SUCCESS if command aborted else FAILED
- */
-static int
-_scsih_dev_reset(struct scsi_cmnd *scmd)
-{
- struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct _sas_device *sas_device = NULL;
- u16 handle;
- int r;
-
- struct scsi_target *starget = scmd->device->sdev_target;
- struct MPT2SAS_TARGET *target_priv_data = starget->hostdata;
-
- starget_printk(KERN_INFO, starget, "attempting device reset! "
- "scmd(%p)\n", scmd);
- _scsih_tm_display_info(ioc, scmd);
-
- sas_device_priv_data = scmd->device->hostdata;
- if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
- starget_printk(KERN_INFO, starget, "device been deleted! "
- "scmd(%p)\n", scmd);
- scmd->result = DID_NO_CONNECT << 16;
- scmd->scsi_done(scmd);
- r = SUCCESS;
- goto out;
- }
-
- /* for hidden raid components obtain the volume_handle */
- handle = 0;
- if (sas_device_priv_data->sas_target->flags &
- MPT_TARGET_FLAGS_RAID_COMPONENT) {
- sas_device = mpt2sas_get_sdev_from_target(ioc,
- target_priv_data);
- if (sas_device)
- handle = sas_device->volume_handle;
- } else
- handle = sas_device_priv_data->sas_target->handle;
-
- if (!handle) {
- scmd->result = DID_RESET << 16;
- r = FAILED;
- goto out;
- }
-
- r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
- scmd->device->id, scmd->device->lun,
- MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, TM_MUTEX_ON);
-
- out:
- sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
- ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
-
- if (sas_device)
- sas_device_put(sas_device);
-
- return r;
-}
-
-/**
- * _scsih_target_reset - eh threads main target reset routine
- * @scmd: pointer to scsi command object
- *
- * Returns SUCCESS if command aborted else FAILED
- */
-static int
-_scsih_target_reset(struct scsi_cmnd *scmd)
-{
- struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct _sas_device *sas_device = NULL;
- u16 handle;
- int r;
- struct scsi_target *starget = scmd->device->sdev_target;
- struct MPT2SAS_TARGET *target_priv_data = starget->hostdata;
-
- starget_printk(KERN_INFO, starget, "attempting target reset! "
- "scmd(%p)\n", scmd);
- _scsih_tm_display_info(ioc, scmd);
-
- sas_device_priv_data = scmd->device->hostdata;
- if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
- starget_printk(KERN_INFO, starget, "target been deleted! "
- "scmd(%p)\n", scmd);
- scmd->result = DID_NO_CONNECT << 16;
- scmd->scsi_done(scmd);
- r = SUCCESS;
- goto out;
- }
-
- /* for hidden raid components obtain the volume_handle */
- handle = 0;
- if (sas_device_priv_data->sas_target->flags &
- MPT_TARGET_FLAGS_RAID_COMPONENT) {
- sas_device = mpt2sas_get_sdev_from_target(ioc,
- target_priv_data);
- if (sas_device)
- handle = sas_device->volume_handle;
- } else
- handle = sas_device_priv_data->sas_target->handle;
-
- if (!handle) {
- scmd->result = DID_RESET << 16;
- r = FAILED;
- goto out;
- }
-
- r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
- scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
- 30, TM_MUTEX_ON);
-
- out:
- starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
- ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
-
- if (sas_device)
- sas_device_put(sas_device);
-
- return r;
-}
-
-/**
- * _scsih_host_reset - eh threads main host reset routine
- * @scmd: pointer to scsi command object
- *
- * Returns SUCCESS if command aborted else FAILED
- */
-static int
-_scsih_host_reset(struct scsi_cmnd *scmd)
-{
- struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
- int r, retval;
-
- printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n",
- ioc->name, scmd);
- scsi_print_command(scmd);
-
- if (ioc->is_driver_loading) {
- printk(MPT2SAS_INFO_FMT "Blocking the host reset\n",
- ioc->name);
- r = FAILED;
- goto out;
- }
-
- retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- r = (retval < 0) ? FAILED : SUCCESS;
-
- out:
- printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
- ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
-
- return r;
-}
-
-/**
- * _scsih_fw_event_add - insert and queue up fw_event
- * @ioc: per adapter object
- * @fw_event: object describing the event
- * Context: This function will acquire ioc->fw_event_lock.
- *
- * This adds the firmware event object into link list, then queues it up to
- * be processed from user context.
- *
- * Return nothing.
- */
-static void
-_scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
-{
- unsigned long flags;
-
- if (ioc->firmware_event_thread == NULL)
- return;
-
- spin_lock_irqsave(&ioc->fw_event_lock, flags);
- fw_event_work_get(fw_event);
- list_add_tail(&fw_event->list, &ioc->fw_event_list);
- INIT_DELAYED_WORK(&fw_event->delayed_work, _firmware_event_work);
- fw_event_work_get(fw_event);
- queue_delayed_work(ioc->firmware_event_thread,
- &fw_event->delayed_work, 0);
- spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-}
-
-/**
- * _scsih_fw_event_del_from_list - delete fw_event from the list
- * @ioc: per adapter object
- * @fw_event: object describing the event
- * Context: This function will acquire ioc->fw_event_lock.
- *
- * If the fw_event is on the fw_event_list, remove it and do a put.
- *
- * Return nothing.
- */
-static void
-_scsih_fw_event_del_from_list(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
- *fw_event)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->fw_event_lock, flags);
- if (!list_empty(&fw_event->list)) {
- list_del_init(&fw_event->list);
- fw_event_work_put(fw_event);
- }
- spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-}
-
-/**
- * _scsih_error_recovery_delete_devices - remove devices not responding
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc)
-{
- struct fw_event_work *fw_event;
-
- if (ioc->is_driver_loading)
- return;
-
- fw_event = alloc_fw_event_work(0);
- if (!fw_event)
- return;
-
- fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
- fw_event->ioc = ioc;
- _scsih_fw_event_add(ioc, fw_event);
- fw_event_work_put(fw_event);
-}
-
-/**
- * mpt2sas_port_enable_complete - port enable completed (fake event)
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-void
-mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc)
-{
- struct fw_event_work *fw_event;
-
- fw_event = alloc_fw_event_work(0);
- if (!fw_event)
- return;
- fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE;
- fw_event->ioc = ioc;
- _scsih_fw_event_add(ioc, fw_event);
- fw_event_work_put(fw_event);
-}
-
-static struct fw_event_work *dequeue_next_fw_event(struct MPT2SAS_ADAPTER *ioc)
-{
- unsigned long flags;
- struct fw_event_work *fw_event = NULL;
-
- spin_lock_irqsave(&ioc->fw_event_lock, flags);
- if (!list_empty(&ioc->fw_event_list)) {
- fw_event = list_first_entry(&ioc->fw_event_list,
- struct fw_event_work, list);
- list_del_init(&fw_event->list);
- }
- spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-
- return fw_event;
-}
-
-/**
- * _scsih_fw_event_cleanup_queue - cleanup event queue
- * @ioc: per adapter object
- *
- * Walk the firmware event queue, either killing timers, or waiting
- * for outstanding events to complete
- *
- * Return nothing.
- */
-static void
-_scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc)
-{
- struct fw_event_work *fw_event;
-
- if (list_empty(&ioc->fw_event_list) ||
- !ioc->firmware_event_thread || in_interrupt())
- return;
-
- while ((fw_event = dequeue_next_fw_event(ioc))) {
- /*
- * Wait on the fw_event to complete. If this returns 1, then
- * the event was never executed, and we need a put for the
- * reference the delayed_work had on the fw_event.
- *
- * If it did execute, we wait for it to finish, and the put will
- * happen from _firmware_event_work()
- */
- if (cancel_delayed_work_sync(&fw_event->delayed_work))
- fw_event_work_put(fw_event);
-
- fw_event_work_put(fw_event);
- }
-}
-
-/**
- * _scsih_ublock_io_all_device - unblock every device
- * @ioc: per adapter object
- *
- * change the device state from block to running
- */
-static void
-_scsih_ublock_io_all_device(struct MPT2SAS_ADAPTER *ioc)
-{
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct scsi_device *sdev;
-
- shost_for_each_device(sdev, ioc->shost) {
- sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
- continue;
- if (!sas_device_priv_data->block)
- continue;
- sas_device_priv_data->block = 0;
- dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_running, "
- "handle(0x%04x)\n",
- sas_device_priv_data->sas_target->handle));
- scsi_internal_device_unblock(sdev, SDEV_RUNNING);
- }
-}
-/**
- * _scsih_ublock_io_device - set the device state to SDEV_RUNNING
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During device pull we need to appropiately set the sdev state.
- */
-static void
-_scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
-{
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct scsi_device *sdev;
-
- shost_for_each_device(sdev, ioc->shost) {
- sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
- continue;
- if (!sas_device_priv_data->block)
- continue;
- if (sas_device_priv_data->sas_target->sas_address ==
- sas_address) {
- dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
- MPT2SAS_INFO_FMT "SDEV_RUNNING: "
- "sas address(0x%016llx)\n", ioc->name,
- (unsigned long long)sas_address));
- sas_device_priv_data->block = 0;
- scsi_internal_device_unblock(sdev, SDEV_RUNNING);
- }
- }
-}
-
-/**
- * _scsih_block_io_all_device - set the device state to SDEV_BLOCK
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During device pull we need to appropiately set the sdev state.
- */
-static void
-_scsih_block_io_all_device(struct MPT2SAS_ADAPTER *ioc)
-{
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct scsi_device *sdev;
-
- shost_for_each_device(sdev, ioc->shost) {
- sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
- continue;
- if (sas_device_priv_data->block)
- continue;
- sas_device_priv_data->block = 1;
- dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_blocked, "
- "handle(0x%04x)\n",
- sas_device_priv_data->sas_target->handle));
- scsi_internal_device_block(sdev);
- }
-}
-
-
-/**
- * _scsih_block_io_device - set the device state to SDEV_BLOCK
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During device pull we need to appropiately set the sdev state.
- */
-static void
-_scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct scsi_device *sdev;
-
- shost_for_each_device(sdev, ioc->shost) {
- sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data)
- continue;
- if (sas_device_priv_data->block)
- continue;
- if (sas_device_priv_data->sas_target->handle == handle) {
- dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
- MPT2SAS_INFO_FMT "SDEV_BLOCK: "
- "handle(0x%04x)\n", ioc->name, handle));
- sas_device_priv_data->block = 1;
- scsi_internal_device_block(sdev);
- }
- }
-}
-
-/**
- * _scsih_block_io_to_children_attached_to_ex
- * @ioc: per adapter object
- * @sas_expander: the sas_device object
- *
- * This routine set sdev state to SDEV_BLOCK for all devices
- * attached to this expander. This function called when expander is
- * pulled.
- */
-static void
-_scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_node *sas_expander)
-{
- struct _sas_port *mpt2sas_port;
- struct _sas_device *sas_device;
- struct _sas_node *expander_sibling;
- unsigned long flags;
-
- if (!sas_expander)
- return;
-
- list_for_each_entry(mpt2sas_port,
- &sas_expander->sas_port_list, port_list) {
- if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- mpt2sas_port->remote_identify.sas_address);
- if (sas_device) {
- set_bit(sas_device->handle,
- ioc->blocking_handles);
- sas_device_put(sas_device);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- }
- }
-
- list_for_each_entry(mpt2sas_port,
- &sas_expander->sas_port_list, port_list) {
-
- if (mpt2sas_port->remote_identify.device_type ==
- SAS_EDGE_EXPANDER_DEVICE ||
- mpt2sas_port->remote_identify.device_type ==
- SAS_FANOUT_EXPANDER_DEVICE) {
- expander_sibling =
- mpt2sas_scsih_expander_find_by_sas_address(
- ioc, mpt2sas_port->remote_identify.sas_address);
- _scsih_block_io_to_children_attached_to_ex(ioc,
- expander_sibling);
- }
- }
-}
-
-/**
- * _scsih_block_io_to_children_attached_directly
- * @ioc: per adapter object
- * @event_data: topology change event data
- *
- * This routine set sdev state to SDEV_BLOCK for all devices
- * direct attached during device pull.
- */
-static void
-_scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataSasTopologyChangeList_t *event_data)
-{
- int i;
- u16 handle;
- u16 reason_code;
- u8 phy_number;
-
- for (i = 0; i < event_data->NumEntries; i++) {
- handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
- if (!handle)
- continue;
- phy_number = event_data->StartPhyNum + i;
- reason_code = event_data->PHY[i].PhyStatus &
- MPI2_EVENT_SAS_TOPO_RC_MASK;
- if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
- _scsih_block_io_device(ioc, handle);
- }
-}
-
-/**
- * _scsih_tm_tr_send - send task management request
- * @ioc: per adapter object
- * @handle: device handle
- * Context: interrupt time.
- *
- * This code is to initiate the device removal handshake protocol
- * with controller firmware. This function will issue target reset
- * using high priority request queue. It will send a sas iounit
- * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
- *
- * This is designed to send muliple task management request at the same
- * time to the fifo. If the fifo is full, we will append the request,
- * and process it in a future completion.
- */
-static void
-_scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- Mpi2SCSITaskManagementRequest_t *mpi_request;
- u16 smid;
- struct _sas_device *sas_device = NULL;
- struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
- u64 sas_address = 0;
- unsigned long flags;
- struct _tr_list *delayed_tr;
- u32 ioc_state;
-
- if (ioc->remove_host) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
- "removed: handle(0x%04x)\n", __func__, ioc->name, handle));
- return;
- } else if (ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
- "error recovery: handle(0x%04x)\n", __func__, ioc->name,
- handle));
- return;
- }
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
- "operational: handle(0x%04x)\n", __func__, ioc->name,
- handle));
- return;
- }
-
- /* if PD, then return */
- if (test_bit(handle, ioc->pd_handles))
- return;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
- if (sas_device && sas_device->starget &&
- sas_device->starget->hostdata) {
- sas_target_priv_data = sas_device->starget->hostdata;
- sas_target_priv_data->deleted = 1;
- sas_address = sas_device->sas_address;
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- if (sas_target_priv_data) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: "
- "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle,
- (unsigned long long)sas_address));
- _scsih_ublock_io_device(ioc, sas_address);
- sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
- }
-
- smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
- if (!smid) {
- delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
- if (!delayed_tr)
- goto out;
- INIT_LIST_HEAD(&delayed_tr->list);
- delayed_tr->handle = handle;
- list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "DELAYED:tr:handle(0x%04x), (open)\n",
- ioc->name, handle));
- goto out;
- }
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), "
- "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid,
- ioc->tm_tr_cb_idx));
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
- mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
- mpi_request->DevHandle = cpu_to_le16(handle);
- mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
- mpt2sas_base_put_smid_hi_priority(ioc, smid);
-out:
- if (sas_device)
- sas_device_put(sas_device);
-}
-
-
-
-/**
- * _scsih_sas_control_complete - completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt time.
- *
- * This is the sas iounit control completion routine.
- * This code is part of the code to initiate the device removal
- * handshake protocol with controller firmware.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-static u8
-_scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u8 msix_index, u32 reply)
-{
- Mpi2SasIoUnitControlReply_t *mpi_reply =
- mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (likely(mpi_reply)) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "sc_complete:handle(0x%04x), (open) "
- "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid,
- le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo)));
- } else {
- printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- }
- return 1;
-}
-
-/**
- * _scsih_tm_tr_volume_send - send target reset request for volumes
- * @ioc: per adapter object
- * @handle: device handle
- * Context: interrupt time.
- *
- * This is designed to send muliple task management request at the same
- * time to the fifo. If the fifo is full, we will append the request,
- * and process it in a future completion.
- */
-static void
-_scsih_tm_tr_volume_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- Mpi2SCSITaskManagementRequest_t *mpi_request;
- u16 smid;
- struct _tr_list *delayed_tr;
-
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
- "progress!\n", __func__, ioc->name));
- return;
- }
-
- smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx);
- if (!smid) {
- delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
- if (!delayed_tr)
- return;
- INIT_LIST_HEAD(&delayed_tr->list);
- delayed_tr->handle = handle;
- list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list);
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "DELAYED:tr:handle(0x%04x), (open)\n",
- ioc->name, handle));
- return;
- }
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), "
- "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid,
- ioc->tm_tr_volume_cb_idx));
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
- mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
- mpi_request->DevHandle = cpu_to_le16(handle);
- mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
- mpt2sas_base_put_smid_hi_priority(ioc, smid);
-}
-
-/**
- * _scsih_tm_volume_tr_complete - target reset completion
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt time.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-static u8
-_scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u8 msix_index, u32 reply)
-{
- u16 handle;
- Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
- Mpi2SCSITaskManagementReply_t *mpi_reply =
- mpt2sas_base_get_reply_virt_addr(ioc, reply);
-
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
- "progress!\n", __func__, ioc->name));
- return 1;
- }
- if (unlikely(!mpi_reply)) {
- printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return 1;
- }
- mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid);
- handle = le16_to_cpu(mpi_request_tm->DevHandle);
- if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
- dewtprintk(ioc, printk("spurious interrupt: "
- "handle(0x%04x:0x%04x), smid(%d)!!!\n", handle,
- le16_to_cpu(mpi_reply->DevHandle), smid));
- return 0;
- }
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
- "loginfo(0x%08x), completed(%d)\n", ioc->name,
- handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo),
- le32_to_cpu(mpi_reply->TerminationCount)));
-
- return _scsih_check_for_pending_tm(ioc, smid);
-}
-
-/**
- * _scsih_tm_tr_complete -
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt time.
- *
- * This is the target reset completion routine.
- * This code is part of the code to initiate the device removal
- * handshake protocol with controller firmware.
- * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-static u8
-_scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply)
-{
- u16 handle;
- Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
- Mpi2SCSITaskManagementReply_t *mpi_reply =
- mpt2sas_base_get_reply_virt_addr(ioc, reply);
- Mpi2SasIoUnitControlRequest_t *mpi_request;
- u16 smid_sas_ctrl;
- u32 ioc_state;
-
- if (ioc->remove_host) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
- "removed\n", __func__, ioc->name));
- return 1;
- } else if (ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
- "error recovery\n", __func__, ioc->name));
- return 1;
- }
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
- "operational\n", __func__, ioc->name));
- return 1;
- }
- if (unlikely(!mpi_reply)) {
- printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return 1;
- }
- mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid);
- handle = le16_to_cpu(mpi_request_tm->DevHandle);
- if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "spurious interrupt: "
- "handle(0x%04x:0x%04x), smid(%d)!!!\n", ioc->name, handle,
- le16_to_cpu(mpi_reply->DevHandle), smid));
- return 0;
- }
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
- "loginfo(0x%08x), completed(%d)\n", ioc->name,
- handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo),
- le32_to_cpu(mpi_reply->TerminationCount)));
-
- smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
- if (!smid_sas_ctrl) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- return 1;
- }
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_send:handle(0x%04x), "
- "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid_sas_ctrl,
- ioc->tm_sas_control_cb_idx));
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl);
- memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
- mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
- mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
- mpi_request->DevHandle = mpi_request_tm->DevHandle;
- mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl);
-
- return _scsih_check_for_pending_tm(ioc, smid);
-}
-
-/**
- * _scsih_check_for_pending_tm - check for pending task management
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * This will check delayed target reset list, and feed the
- * next reqeust.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-static u8
-_scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- struct _tr_list *delayed_tr;
-
- if (!list_empty(&ioc->delayed_tr_volume_list)) {
- delayed_tr = list_entry(ioc->delayed_tr_volume_list.next,
- struct _tr_list, list);
- mpt2sas_base_free_smid(ioc, smid);
- _scsih_tm_tr_volume_send(ioc, delayed_tr->handle);
- list_del(&delayed_tr->list);
- kfree(delayed_tr);
- return 0;
- }
-
- if (!list_empty(&ioc->delayed_tr_list)) {
- delayed_tr = list_entry(ioc->delayed_tr_list.next,
- struct _tr_list, list);
- mpt2sas_base_free_smid(ioc, smid);
- _scsih_tm_tr_send(ioc, delayed_tr->handle);
- list_del(&delayed_tr->list);
- kfree(delayed_tr);
- return 0;
- }
-
- return 1;
-}
-
-/**
- * _scsih_check_topo_delete_events - sanity check on topo events
- * @ioc: per adapter object
- * @event_data: the event data payload
- *
- * This routine added to better handle cable breaker.
- *
- * This handles the case where driver receives multiple expander
- * add and delete events in a single shot. When there is a delete event
- * the routine will void any pending add events waiting in the event queue.
- *
- * Return nothing.
- */
-static void
-_scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataSasTopologyChangeList_t *event_data)
-{
- struct fw_event_work *fw_event;
- Mpi2EventDataSasTopologyChangeList_t *local_event_data;
- u16 expander_handle;
- struct _sas_node *sas_expander;
- unsigned long flags;
- int i, reason_code;
- u16 handle;
-
- for (i = 0 ; i < event_data->NumEntries; i++) {
- handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
- if (!handle)
- continue;
- reason_code = event_data->PHY[i].PhyStatus &
- MPI2_EVENT_SAS_TOPO_RC_MASK;
- if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
- _scsih_tm_tr_send(ioc, handle);
- }
-
- expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
- if (expander_handle < ioc->sas_hba.num_phys) {
- _scsih_block_io_to_children_attached_directly(ioc, event_data);
- return;
- }
- if (event_data->ExpStatus ==
- MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) {
- /* put expander attached devices into blocking state */
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
- expander_handle);
- _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- do {
- handle = find_first_bit(ioc->blocking_handles,
- ioc->facts.MaxDevHandle);
- if (handle < ioc->facts.MaxDevHandle)
- _scsih_block_io_device(ioc, handle);
- } while (test_and_clear_bit(handle, ioc->blocking_handles));
- } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
- _scsih_block_io_to_children_attached_directly(ioc, event_data);
-
- if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
- return;
-
- /* mark ignore flag for pending events */
- spin_lock_irqsave(&ioc->fw_event_lock, flags);
- list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
- if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
- fw_event->ignore)
- continue;
- local_event_data = (Mpi2EventDataSasTopologyChangeList_t *)
- fw_event->event_data;
- if (local_event_data->ExpStatus ==
- MPI2_EVENT_SAS_TOPO_ES_ADDED ||
- local_event_data->ExpStatus ==
- MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
- if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
- expander_handle) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "setting ignoring flag\n", ioc->name));
- fw_event->ignore = 1;
- }
- }
- }
- spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-}
-
-/**
- * _scsih_set_volume_delete_flag - setting volume delete flag
- * @ioc: per adapter object
- * @handle: device handle
- *
- * This
- * Return nothing.
- */
-static void
-_scsih_set_volume_delete_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _raid_device *raid_device;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
- if (raid_device && raid_device->starget &&
- raid_device->starget->hostdata) {
- sas_target_priv_data =
- raid_device->starget->hostdata;
- sas_target_priv_data->deleted = 1;
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "setting delete flag: handle(0x%04x), "
- "wwid(0x%016llx)\n", ioc->name, handle,
- (unsigned long long) raid_device->wwid));
- }
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-}
-
-/**
- * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
- * @handle: input handle
- * @a: handle for volume a
- * @b: handle for volume b
- *
- * IR firmware only supports two raid volumes. The purpose of this
- * routine is to set the volume handle in either a or b. When the given
- * input handle is non-zero, or when a and b have not been set before.
- */
-static void
-_scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b)
-{
- if (!handle || handle == *a || handle == *b)
- return;
- if (!*a)
- *a = handle;
- else if (!*b)
- *b = handle;
-}
-
-/**
- * _scsih_check_ir_config_unhide_events - check for UNHIDE events
- * @ioc: per adapter object
- * @event_data: the event data payload
- * Context: interrupt time.
- *
- * This routine will send target reset to volume, followed by target
- * resets to the PDs. This is called when a PD has been removed, or
- * volume has been deleted or removed. When the target reset is sent
- * to volume, the PD target resets need to be queued to start upon
- * completion of the volume target reset.
- *
- * Return nothing.
- */
-static void
-_scsih_check_ir_config_unhide_events(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataIrConfigChangeList_t *event_data)
-{
- Mpi2EventIrConfigElement_t *element;
- int i;
- u16 handle, volume_handle, a, b;
- struct _tr_list *delayed_tr;
-
- a = 0;
- b = 0;
-
- if (ioc->is_warpdrive)
- return;
-
- /* Volume Resets for Deleted or Removed */
- element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
- for (i = 0; i < event_data->NumElements; i++, element++) {
- if (element->ReasonCode ==
- MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED ||
- element->ReasonCode ==
- MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
- volume_handle = le16_to_cpu(element->VolDevHandle);
- _scsih_set_volume_delete_flag(ioc, volume_handle);
- _scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
- }
- }
-
- /* Volume Resets for UNHIDE events */
- element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
- for (i = 0; i < event_data->NumElements; i++, element++) {
- if (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
- continue;
- if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) {
- volume_handle = le16_to_cpu(element->VolDevHandle);
- _scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
- }
- }
-
- if (a)
- _scsih_tm_tr_volume_send(ioc, a);
- if (b)
- _scsih_tm_tr_volume_send(ioc, b);
-
- /* PD target resets */
- element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
- for (i = 0; i < event_data->NumElements; i++, element++) {
- if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE)
- continue;
- handle = le16_to_cpu(element->PhysDiskDevHandle);
- volume_handle = le16_to_cpu(element->VolDevHandle);
- clear_bit(handle, ioc->pd_handles);
- if (!volume_handle)
- _scsih_tm_tr_send(ioc, handle);
- else if (volume_handle == a || volume_handle == b) {
- delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
- BUG_ON(!delayed_tr);
- INIT_LIST_HEAD(&delayed_tr->list);
- delayed_tr->handle = handle;
- list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name,
- handle));
- } else
- _scsih_tm_tr_send(ioc, handle);
- }
-}
-
-
-/**
- * _scsih_check_volume_delete_events - set delete flag for volumes
- * @ioc: per adapter object
- * @event_data: the event data payload
- * Context: interrupt time.
- *
- * This will handle the case when the cable connected to entire volume is
- * pulled. We will take care of setting the deleted flag so normal IO will
- * not be sent.
- *
- * Return nothing.
- */
-static void
-_scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataIrVolume_t *event_data)
-{
- u32 state;
-
- if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
- return;
- state = le32_to_cpu(event_data->NewValue);
- if (state == MPI2_RAID_VOL_STATE_MISSING || state ==
- MPI2_RAID_VOL_STATE_FAILED)
- _scsih_set_volume_delete_flag(ioc,
- le16_to_cpu(event_data->VolDevHandle));
-}
-
-/**
- * _scsih_temp_threshold_events - display temperature threshold exceeded events
- * @ioc: per adapter object
- * @event_data: the temp threshold event data
- * Context: interrupt time.
- *
- * Return nothing.
- */
-static void
-_scsih_temp_threshold_events(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataTemperature_t *event_data)
-{
- if (ioc->temp_sensors_count >= event_data->SensorNum) {
- printk(MPT2SAS_ERR_FMT "Temperature Threshold flags %s%s%s%s"
- " exceeded for Sensor: %d !!!\n", ioc->name,
- ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ",
- ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ",
- ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ",
- ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ",
- event_data->SensorNum);
- printk(MPT2SAS_ERR_FMT "Current Temp In Celsius: %d\n",
- ioc->name, event_data->CurrentTemperature);
- }
-}
-
-/**
- * _scsih_flush_running_cmds - completing outstanding commands.
- * @ioc: per adapter object
- *
- * The flushing out of all pending scmd commands following host reset,
- * where all IO is dropped to the floor.
- *
- * Return nothing.
- */
-static void
-_scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
-{
- struct scsi_cmnd *scmd;
- u16 smid;
- u16 count = 0;
-
- for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
- scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
- if (!scmd)
- continue;
- count++;
- mpt2sas_base_free_smid(ioc, smid);
- scsi_dma_unmap(scmd);
- if (ioc->pci_error_recovery)
- scmd->result = DID_NO_CONNECT << 16;
- else
- scmd->result = DID_RESET << 16;
- scmd->scsi_done(scmd);
- }
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n",
- ioc->name, count));
-}
-
-/**
- * _scsih_setup_eedp - setup MPI request for EEDP transfer
- * @scmd: pointer to scsi command object
- * @mpi_request: pointer to the SCSI_IO reqest message frame
- *
- * Supporting protection 1 and 3.
- *
- * Returns nothing
- */
-static void
-_scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
-{
- u16 eedp_flags;
- unsigned char prot_op = scsi_get_prot_op(scmd);
- unsigned char prot_type = scsi_get_prot_type(scmd);
-
- if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL)
- return;
-
- if (prot_op == SCSI_PROT_READ_STRIP)
- eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
- else if (prot_op == SCSI_PROT_WRITE_INSERT)
- eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
- else
- return;
-
- switch (prot_type) {
- case SCSI_PROT_DIF_TYPE1:
- case SCSI_PROT_DIF_TYPE2:
-
- /*
- * enable ref/guard checking
- * auto increment ref tag
- */
- eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
- MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
- MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
- mpi_request->CDB.EEDP32.PrimaryReferenceTag =
- cpu_to_be32(scsi_get_lba(scmd));
- break;
-
- case SCSI_PROT_DIF_TYPE3:
-
- /*
- * enable guard checking
- */
- eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
- break;
- }
- mpi_request->EEDPBlockSize = cpu_to_le32(scmd->device->sector_size);
- mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
-}
-
-/**
- * _scsih_eedp_error_handling - return sense code for EEDP errors
- * @scmd: pointer to scsi command object
- * @ioc_status: ioc status
- *
- * Returns nothing
- */
-static void
-_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
-{
- u8 ascq;
-
- switch (ioc_status) {
- case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
- ascq = 0x01;
- break;
- case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
- ascq = 0x02;
- break;
- case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
- ascq = 0x03;
- break;
- default:
- ascq = 0x00;
- break;
- }
-
- scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST, 0x10, ascq);
- scmd->result = DRIVER_SENSE << 24 | (DID_ABORT << 16) |
- SAM_STAT_CHECK_CONDITION;
-}
-
-/**
- * _scsih_scsi_direct_io_get - returns direct io flag
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns the smid stored scmd pointer.
- */
-static inline u8
-_scsih_scsi_direct_io_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- return ioc->scsi_lookup[smid - 1].direct_io;
-}
-
-/**
- * _scsih_scsi_direct_io_set - sets direct io flag
- * @ioc: per adapter object
- * @smid: system request message index
- * @direct_io: Zero or non-zero value to set in the direct_io flag
- *
- * Returns Nothing.
- */
-static inline void
-_scsih_scsi_direct_io_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
-{
- ioc->scsi_lookup[smid - 1].direct_io = direct_io;
-}
-
-
-/**
- * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
- * @ioc: per adapter object
- * @scmd: pointer to scsi command object
- * @raid_device: pointer to raid device data structure
- * @mpi_request: pointer to the SCSI_IO reqest message frame
- * @smid: system request message index
- *
- * Returns nothing
- */
-static void
-_scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
- u16 smid)
-{
- sector_t v_lba, p_lba, stripe_off, column, io_size;
- u32 stripe_sz, stripe_exp;
- u8 num_pds, cmd = scmd->cmnd[0];
-
- if (cmd != READ_10 && cmd != WRITE_10 &&
- cmd != READ_16 && cmd != WRITE_16)
- return;
-
- if (cmd == READ_10 || cmd == WRITE_10)
- v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
- else
- v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
-
- io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
-
- if (v_lba + io_size - 1 > raid_device->max_lba)
- return;
-
- stripe_sz = raid_device->stripe_sz;
- stripe_exp = raid_device->stripe_exponent;
- stripe_off = v_lba & (stripe_sz - 1);
-
- /* Return unless IO falls within a stripe */
- if (stripe_off + io_size > stripe_sz)
- return;
-
- num_pds = raid_device->num_pds;
- p_lba = v_lba >> stripe_exp;
- column = sector_div(p_lba, num_pds);
- p_lba = (p_lba << stripe_exp) + stripe_off;
-
- mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
-
- if (cmd == READ_10 || cmd == WRITE_10)
- put_unaligned_be32(lower_32_bits(p_lba),
- &mpi_request->CDB.CDB32[2]);
- else
- put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
-
- _scsih_scsi_direct_io_set(ioc, smid, 1);
-}
-
-/**
- * _scsih_qcmd - main scsi request entry point
- * @scmd: pointer to scsi command object
- * @done: function pointer to be invoked on completion
- *
- * The callback index is set inside `ioc->scsi_io_cb_idx`.
- *
- * Returns 0 on success. If there's a failure, return either:
- * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
- * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
- */
-static int
-_scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
-{
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct _raid_device *raid_device;
- Mpi2SCSIIORequest_t *mpi_request;
- u32 mpi_control;
- u16 smid;
-
- sas_device_priv_data = scmd->device->hostdata;
- if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
- scmd->result = DID_NO_CONNECT << 16;
- scmd->scsi_done(scmd);
- return 0;
- }
-
- if (ioc->pci_error_recovery || ioc->remove_host) {
- scmd->result = DID_NO_CONNECT << 16;
- scmd->scsi_done(scmd);
- return 0;
- }
-
- sas_target_priv_data = sas_device_priv_data->sas_target;
- /* invalid device handle */
- if (sas_target_priv_data->handle == MPT2SAS_INVALID_DEVICE_HANDLE) {
- scmd->result = DID_NO_CONNECT << 16;
- scmd->scsi_done(scmd);
- return 0;
- }
-
- /* host recovery or link resets sent via IOCTLs */
- if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
- return SCSI_MLQUEUE_HOST_BUSY;
- /* device busy with task management */
- else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
- return SCSI_MLQUEUE_DEVICE_BUSY;
- /* device has been deleted */
- else if (sas_target_priv_data->deleted) {
- scmd->result = DID_NO_CONNECT << 16;
- scmd->scsi_done(scmd);
- return 0;
- }
-
- if (scmd->sc_data_direction == DMA_FROM_DEVICE)
- mpi_control = MPI2_SCSIIO_CONTROL_READ;
- else if (scmd->sc_data_direction == DMA_TO_DEVICE)
- mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
- else
- mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
-
- /* set tags */
- mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-
- /* Make sure Device is not raid volume.
- * We do not expose raid functionality to upper layer for warpdrive.
- */
- if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
- sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
- mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
-
- smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- goto out;
- }
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
- _scsih_setup_eedp(scmd, mpi_request);
- if (scmd->cmd_len == 32)
- mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
- mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
- if (sas_device_priv_data->sas_target->flags &
- MPT_TARGET_FLAGS_RAID_COMPONENT)
- mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
- else
- mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
- mpi_request->DevHandle =
- cpu_to_le16(sas_device_priv_data->sas_target->handle);
- mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
- mpi_request->Control = cpu_to_le32(mpi_control);
- mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
- mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
- mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
- mpi_request->SenseBufferLowAddress =
- mpt2sas_base_get_sense_buffer_dma(ioc, smid);
- mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
- mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
- MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
- int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
- mpi_request->LUN);
- memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
-
- if (!mpi_request->DataLength) {
- mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL);
- } else {
- if (_scsih_build_scatter_gather(ioc, scmd, smid)) {
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
- }
-
- raid_device = sas_target_priv_data->raid_device;
- if (raid_device && raid_device->direct_io_enabled)
- _scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request,
- smid);
-
- if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST))
- mpt2sas_base_put_smid_scsi_io(ioc, smid,
- le16_to_cpu(mpi_request->DevHandle));
- else
- mpt2sas_base_put_smid_default(ioc, smid);
- return 0;
-
- out:
- return SCSI_MLQUEUE_HOST_BUSY;
-}
-
-/**
- * _scsih_normalize_sense - normalize descriptor and fixed format sense data
- * @sense_buffer: sense data returned by target
- * @data: normalized skey/asc/ascq
- *
- * Return nothing.
- */
-static void
-_scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
-{
- if ((sense_buffer[0] & 0x7F) >= 0x72) {
- /* descriptor format */
- data->skey = sense_buffer[1] & 0x0F;
- data->asc = sense_buffer[2];
- data->ascq = sense_buffer[3];
- } else {
- /* fixed format */
- data->skey = sense_buffer[2] & 0x0F;
- data->asc = sense_buffer[12];
- data->ascq = sense_buffer[13];
- }
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request
- * @ioc: per adapter object
- * @scmd: pointer to scsi command object
- * @mpi_reply: reply mf payload returned from firmware
- *
- * scsi_status - SCSI Status code returned from target device
- * scsi_state - state info associated with SCSI_IO determined by ioc
- * ioc_status - ioc supplied status info
- *
- * Return nothing.
- */
-static void
-_scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
-{
- u32 response_info;
- u8 *response_bytes;
- u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- u8 scsi_state = mpi_reply->SCSIState;
- u8 scsi_status = mpi_reply->SCSIStatus;
- char *desc_ioc_state = NULL;
- char *desc_scsi_status = NULL;
- char *desc_scsi_state = ioc->tmp_string;
- u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
- struct _sas_device *sas_device = NULL;
- struct scsi_target *starget = scmd->device->sdev_target;
- struct MPT2SAS_TARGET *priv_target = starget->hostdata;
- char *device_str = NULL;
-
- if (!priv_target)
- return;
-
- if (ioc->hide_ir_msg)
- device_str = "WarpDrive";
- else
- device_str = "volume";
-
- if (log_info == 0x31170000)
- return;
-
- switch (ioc_status) {
- case MPI2_IOCSTATUS_SUCCESS:
- desc_ioc_state = "success";
- break;
- case MPI2_IOCSTATUS_INVALID_FUNCTION:
- desc_ioc_state = "invalid function";
- break;
- case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
- desc_ioc_state = "scsi recovered error";
- break;
- case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
- desc_ioc_state = "scsi invalid dev handle";
- break;
- case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
- desc_ioc_state = "scsi device not there";
- break;
- case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
- desc_ioc_state = "scsi data overrun";
- break;
- case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
- desc_ioc_state = "scsi data underrun";
- break;
- case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
- desc_ioc_state = "scsi io data error";
- break;
- case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
- desc_ioc_state = "scsi protocol error";
- break;
- case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
- desc_ioc_state = "scsi task terminated";
- break;
- case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
- desc_ioc_state = "scsi residual mismatch";
- break;
- case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
- desc_ioc_state = "scsi task mgmt failed";
- break;
- case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
- desc_ioc_state = "scsi ioc terminated";
- break;
- case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
- desc_ioc_state = "scsi ext terminated";
- break;
- case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
- desc_ioc_state = "eedp guard error";
- break;
- case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
- desc_ioc_state = "eedp ref tag error";
- break;
- case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
- desc_ioc_state = "eedp app tag error";
- break;
- default:
- desc_ioc_state = "unknown";
- break;
- }
-
- switch (scsi_status) {
- case MPI2_SCSI_STATUS_GOOD:
- desc_scsi_status = "good";
- break;
- case MPI2_SCSI_STATUS_CHECK_CONDITION:
- desc_scsi_status = "check condition";
- break;
- case MPI2_SCSI_STATUS_CONDITION_MET:
- desc_scsi_status = "condition met";
- break;
- case MPI2_SCSI_STATUS_BUSY:
- desc_scsi_status = "busy";
- break;
- case MPI2_SCSI_STATUS_INTERMEDIATE:
- desc_scsi_status = "intermediate";
- break;
- case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
- desc_scsi_status = "intermediate condmet";
- break;
- case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
- desc_scsi_status = "reservation conflict";
- break;
- case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
- desc_scsi_status = "command terminated";
- break;
- case MPI2_SCSI_STATUS_TASK_SET_FULL:
- desc_scsi_status = "task set full";
- break;
- case MPI2_SCSI_STATUS_ACA_ACTIVE:
- desc_scsi_status = "aca active";
- break;
- case MPI2_SCSI_STATUS_TASK_ABORTED:
- desc_scsi_status = "task aborted";
- break;
- default:
- desc_scsi_status = "unknown";
- break;
- }
-
- desc_scsi_state[0] = '\0';
- if (!scsi_state)
- desc_scsi_state = " ";
- if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
- strcat(desc_scsi_state, "response info ");
- if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
- strcat(desc_scsi_state, "state terminated ");
- if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
- strcat(desc_scsi_state, "no status ");
- if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
- strcat(desc_scsi_state, "autosense failed ");
- if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
- strcat(desc_scsi_state, "autosense valid ");
-
- scsi_print_command(scmd);
-
- if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
- printk(MPT2SAS_WARN_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
- device_str, (unsigned long long)priv_target->sas_address);
- } else {
- sas_device = mpt2sas_get_sdev_from_target(ioc, priv_target);
- if (sas_device) {
- printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), "
- "phy(%d)\n", ioc->name, sas_device->sas_address,
- sas_device->phy);
- printk(MPT2SAS_WARN_FMT
- "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
- ioc->name, sas_device->enclosure_logical_id,
- sas_device->slot);
-
- sas_device_put(sas_device);
- }
- }
-
- printk(MPT2SAS_WARN_FMT "\thandle(0x%04x), ioc_status(%s)(0x%04x), "
- "smid(%d)\n", ioc->name, le16_to_cpu(mpi_reply->DevHandle),
- desc_ioc_state, ioc_status, smid);
- printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), "
- "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow,
- scsi_get_resid(scmd));
- printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), "
- "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag),
- le32_to_cpu(mpi_reply->TransferCount), scmd->result);
- printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), "
- "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status,
- scsi_status, desc_scsi_state, scsi_state);
-
- if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
- struct sense_info data;
- _scsih_normalize_sense(scmd->sense_buffer, &data);
- printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: "
- "[0x%02x,0x%02x,0x%02x], count(%d)\n", ioc->name, data.skey,
- data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
- }
-
- if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
- response_info = le32_to_cpu(mpi_reply->ResponseInfo);
- response_bytes = (u8 *)&response_info;
- _scsih_response_code(ioc, response_bytes[0]);
- }
-}
-#endif
-
-/**
- * _scsih_turn_on_pfa_led - illuminate PFA LED
- * @ioc: per adapter object
- * @handle: device handle
- * Context: process
- *
- * Return nothing.
- */
-static void
-_scsih_turn_on_pfa_led(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- Mpi2SepReply_t mpi_reply;
- Mpi2SepRequest_t mpi_request;
- struct _sas_device *sas_device;
-
- sas_device = mpt2sas_get_sdev_by_handle(ioc, handle);
- if (!sas_device)
- return;
-
- memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
- mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
- mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
- mpi_request.SlotStatus =
- cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
- mpi_request.DevHandle = cpu_to_le16(handle);
- mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
- if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
- &mpi_request)) != 0) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__);
- goto out;
- }
- sas_device->pfa_led_on = 1;
-
-
- if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
- ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
- le32_to_cpu(mpi_reply.IOCLogInfo)));
- goto out;
- }
-out:
- sas_device_put(sas_device);
-}
-
-/**
- * _scsih_turn_off_pfa_led - turn off PFA LED
- * @ioc: per adapter object
- * @sas_device: sas device whose PFA LED has to turned off
- * Context: process
- *
- * Return nothing.
- */
-static void
-_scsih_turn_off_pfa_led(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_device *sas_device)
-{
- Mpi2SepReply_t mpi_reply;
- Mpi2SepRequest_t mpi_request;
-
- memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
- mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
- mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
- mpi_request.SlotStatus = 0;
- mpi_request.Slot = cpu_to_le16(sas_device->slot);
- mpi_request.DevHandle = 0;
- mpi_request.EnclosureHandle = cpu_to_le16(sas_device->enclosure_handle);
- mpi_request.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
- if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
- &mpi_request)) != 0) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__);
- return;
- }
-
- if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "enclosure_processor: "
- "ioc_status (0x%04x), loginfo(0x%08x)\n", ioc->name,
- le16_to_cpu(mpi_reply.IOCStatus),
- le32_to_cpu(mpi_reply.IOCLogInfo)));
- return;
- }
-}
-
-/**
- * _scsih_send_event_to_turn_on_pfa_led - fire delayed event
- * @ioc: per adapter object
- * @handle: device handle
- * Context: interrupt.
- *
- * Return nothing.
- */
-static void
-_scsih_send_event_to_turn_on_pfa_led(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct fw_event_work *fw_event;
-
- fw_event = alloc_fw_event_work(0);
- if (!fw_event)
- return;
- fw_event->event = MPT2SAS_TURN_ON_PFA_LED;
- fw_event->device_handle = handle;
- fw_event->ioc = ioc;
- _scsih_fw_event_add(ioc, fw_event);
- fw_event_work_put(fw_event);
-}
-
-/**
- * _scsih_smart_predicted_fault - process smart errors
- * @ioc: per adapter object
- * @handle: device handle
- * Context: interrupt.
- *
- * Return nothing.
- */
-static void
-_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct scsi_target *starget;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- Mpi2EventNotificationReply_t *event_reply;
- Mpi2EventDataSasDeviceStatusChange_t *event_data;
- struct _sas_device *sas_device;
- ssize_t sz;
- unsigned long flags;
-
- /* only handle non-raid devices */
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
- if (!sas_device) {
- goto out_unlock;
- }
- starget = sas_device->starget;
- sas_target_priv_data = starget->hostdata;
-
- if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
- ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)))
- goto out_unlock;
-
- starget_printk(KERN_WARNING, starget, "predicted fault\n");
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
- _scsih_send_event_to_turn_on_pfa_led(ioc, handle);
-
- /* insert into event log */
- sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
- sizeof(Mpi2EventDataSasDeviceStatusChange_t);
- event_reply = kzalloc(sz, GFP_ATOMIC);
- if (!event_reply) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
-
- event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
- event_reply->Event =
- cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
- event_reply->MsgLength = sz/4;
- event_reply->EventDataLength =
- cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
- event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
- event_reply->EventData;
- event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
- event_data->ASC = 0x5D;
- event_data->DevHandle = cpu_to_le16(handle);
- event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
- mpt2sas_ctl_add_to_event_log(ioc, event_reply);
- kfree(event_reply);
-out:
- if (sas_device)
- sas_device_put(sas_device);
- return;
-
-out_unlock:
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- goto out;
-}
-
-/**
- * _scsih_io_done - scsi request callback
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Callback handler when using _scsih_qcmd.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-static u8
-_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
-{
- Mpi2SCSIIORequest_t *mpi_request;
- Mpi2SCSIIOReply_t *mpi_reply;
- struct scsi_cmnd *scmd;
- u16 ioc_status;
- u32 xfer_cnt;
- u8 scsi_state;
- u8 scsi_status;
- u32 log_info;
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- u32 response_code = 0;
- unsigned long flags;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
- if (scmd == NULL)
- return 1;
-
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-
- if (mpi_reply == NULL) {
- scmd->result = DID_OK << 16;
- goto out;
- }
-
- sas_device_priv_data = scmd->device->hostdata;
- if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
- sas_device_priv_data->sas_target->deleted) {
- scmd->result = DID_NO_CONNECT << 16;
- goto out;
- }
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
- /*
- * WARPDRIVE: If direct_io is set then it is directIO,
- * the failed direct I/O should be redirected to volume
- */
- if (_scsih_scsi_direct_io_get(ioc, smid) &&
- ((ioc_status & MPI2_IOCSTATUS_MASK)
- != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- ioc->scsi_lookup[smid - 1].scmd = scmd;
- _scsih_scsi_direct_io_set(ioc, smid, 0);
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
- mpi_request->DevHandle =
- cpu_to_le16(sas_device_priv_data->sas_target->handle);
- mpt2sas_base_put_smid_scsi_io(ioc, smid,
- sas_device_priv_data->sas_target->handle);
- return 0;
- }
-
-
- /* turning off TLR */
- scsi_state = mpi_reply->SCSIState;
- if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
- response_code =
- le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
- if (!sas_device_priv_data->tlr_snoop_check) {
- sas_device_priv_data->tlr_snoop_check++;
- /* Make sure Device is not raid volume.
- * We do not expose raid functionality to upper layer for warpdrive.
- */
- if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
- sas_is_tlr_enabled(scmd->device) &&
- response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
- sas_disable_tlr(scmd->device);
- sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
- }
- }
-
- xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
- scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
- if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
- log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
- else
- log_info = 0;
- ioc_status &= MPI2_IOCSTATUS_MASK;
- scsi_status = mpi_reply->SCSIStatus;
-
- if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
- (scsi_status == MPI2_SCSI_STATUS_BUSY ||
- scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
- scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
- ioc_status = MPI2_IOCSTATUS_SUCCESS;
- }
-
- if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
- struct sense_info data;
- const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
- smid);
- u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
- le32_to_cpu(mpi_reply->SenseCount));
- memcpy(scmd->sense_buffer, sense_data, sz);
- _scsih_normalize_sense(scmd->sense_buffer, &data);
- /* failure prediction threshold exceeded */
- if (data.asc == 0x5D)
- _scsih_smart_predicted_fault(ioc,
- le16_to_cpu(mpi_reply->DevHandle));
- }
-
- switch (ioc_status) {
- case MPI2_IOCSTATUS_BUSY:
- case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
- scmd->result = SAM_STAT_BUSY;
- break;
-
- case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
- scmd->result = DID_NO_CONNECT << 16;
- break;
-
- case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
- if (sas_device_priv_data->block) {
- scmd->result = DID_TRANSPORT_DISRUPTED << 16;
- goto out;
- }
- if (log_info == 0x32010081) {
- scmd->result = DID_RESET << 16;
- break;
- }
- scmd->result = DID_SOFT_ERROR << 16;
- break;
- case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
- case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
- scmd->result = DID_RESET << 16;
- break;
-
- case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
- if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
- scmd->result = DID_SOFT_ERROR << 16;
- else
- scmd->result = (DID_OK << 16) | scsi_status;
- break;
-
- case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
- scmd->result = (DID_OK << 16) | scsi_status;
-
- if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
- break;
-
- if (xfer_cnt < scmd->underflow) {
- if (scsi_status == SAM_STAT_BUSY)
- scmd->result = SAM_STAT_BUSY;
- else
- scmd->result = DID_SOFT_ERROR << 16;
- } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
- MPI2_SCSI_STATE_NO_SCSI_STATUS))
- scmd->result = DID_SOFT_ERROR << 16;
- else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
- scmd->result = DID_RESET << 16;
- else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
- mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
- mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
- scmd->result = (DRIVER_SENSE << 24) |
- SAM_STAT_CHECK_CONDITION;
- scmd->sense_buffer[0] = 0x70;
- scmd->sense_buffer[2] = ILLEGAL_REQUEST;
- scmd->sense_buffer[12] = 0x20;
- scmd->sense_buffer[13] = 0;
- }
- break;
-
- case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
- scsi_set_resid(scmd, 0);
- case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
- case MPI2_IOCSTATUS_SUCCESS:
- scmd->result = (DID_OK << 16) | scsi_status;
- if (response_code ==
- MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
- (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
- MPI2_SCSI_STATE_NO_SCSI_STATUS)))
- scmd->result = DID_SOFT_ERROR << 16;
- else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
- scmd->result = DID_RESET << 16;
- break;
-
- case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
- case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
- case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
- _scsih_eedp_error_handling(scmd, ioc_status);
- break;
- case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
- case MPI2_IOCSTATUS_INVALID_FUNCTION:
- case MPI2_IOCSTATUS_INVALID_SGL:
- case MPI2_IOCSTATUS_INTERNAL_ERROR:
- case MPI2_IOCSTATUS_INVALID_FIELD:
- case MPI2_IOCSTATUS_INVALID_STATE:
- case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
- case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
- default:
- scmd->result = DID_SOFT_ERROR << 16;
- break;
-
- }
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
- _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
-#endif
-
- out:
- scsi_dma_unmap(scmd);
- scmd->scsi_done(scmd);
- return 1;
-}
-
-/**
- * _scsih_sas_host_refresh - refreshing sas host object contents
- * @ioc: per adapter object
- * Context: user
- *
- * During port enable, fw will send topology events for every device. Its
- * possible that the handles may change from the previous setting, so this
- * code keeping handles updating if changed.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc)
-{
- u16 sz;
- u16 ioc_status;
- int i;
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
- u16 attached_handle;
- u8 link_rate;
-
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
- "updating handles for sas_host(0x%016llx)\n",
- ioc->name, (unsigned long long)ioc->sas_hba.sas_address));
-
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
- * sizeof(Mpi2SasIOUnit0PhyData_t));
- sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
- if (!sas_iounit_pg0) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
- sas_iounit_pg0, sz)) != 0)
- goto out;
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- goto out;
- for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
- link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
- if (i == 0)
- ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
- PhyData[0].ControllerDevHandle);
- ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
- attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
- AttachedDevHandle);
- if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
- link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
- mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
- attached_handle, i, link_rate);
- }
- out:
- kfree(sas_iounit_pg0);
-}
-
-/**
- * _scsih_sas_host_add - create sas host object
- * @ioc: per adapter object
- *
- * Creating host side data object, stored in ioc->sas_hba
- *
- * Return nothing.
- */
-static void
-_scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc)
-{
- int i;
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
- Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
- Mpi2SasPhyPage0_t phy_pg0;
- Mpi2SasDevicePage0_t sas_device_pg0;
- Mpi2SasEnclosurePage0_t enclosure_pg0;
- u16 ioc_status;
- u16 sz;
- u16 device_missing_delay;
-
- mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys);
- if (!ioc->sas_hba.num_phys) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- /* sas_iounit page 0 */
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit0PhyData_t));
- sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
- if (!sas_iounit_pg0) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
- if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
- sas_iounit_pg0, sz))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
-
- /* sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
- sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
- if (!sas_iounit_pg1) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
- if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
- sas_iounit_pg1, sz))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
-
- ioc->io_missing_delay =
- le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay);
- device_missing_delay =
- le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay);
- if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
- ioc->device_missing_delay = (device_missing_delay &
- MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
- else
- ioc->device_missing_delay = device_missing_delay &
- MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
-
- ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
- ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys,
- sizeof(struct _sas_phy), GFP_KERNEL);
- if (!ioc->sas_hba.phy) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
- for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
- if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
- i))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
-
- if (i == 0)
- ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
- PhyData[0].ControllerDevHandle);
- ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
- ioc->sas_hba.phy[i].phy_id = i;
- mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
- phy_pg0, ioc->sas_hba.parent_dev);
- }
- if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out;
- }
- ioc->sas_hba.enclosure_handle =
- le16_to_cpu(sas_device_pg0.EnclosureHandle);
- ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
- printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), "
- "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle,
- (unsigned long long) ioc->sas_hba.sas_address,
- ioc->sas_hba.num_phys) ;
-
- if (ioc->sas_hba.enclosure_handle) {
- if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
- &enclosure_pg0,
- MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
- ioc->sas_hba.enclosure_handle))) {
- ioc->sas_hba.enclosure_logical_id =
- le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
- }
- }
-
- out:
- kfree(sas_iounit_pg1);
- kfree(sas_iounit_pg0);
-}
-
-/**
- * _scsih_expander_add - creating expander object
- * @ioc: per adapter object
- * @handle: expander handle
- *
- * Creating expander object, stored in ioc->sas_expander_list.
- *
- * Return 0 for success, else error.
- */
-static int
-_scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_node *sas_expander;
- Mpi2ConfigReply_t mpi_reply;
- Mpi2ExpanderPage0_t expander_pg0;
- Mpi2ExpanderPage1_t expander_pg1;
- Mpi2SasEnclosurePage0_t enclosure_pg0;
- u32 ioc_status;
- u16 parent_handle;
- u64 sas_address, sas_address_parent = 0;
- int i;
- unsigned long flags;
- struct _sas_port *mpt2sas_port = NULL;
- int rc = 0;
-
- if (!handle)
- return -1;
-
- if (ioc->shost_recovery || ioc->pci_error_recovery)
- return -1;
-
- if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
- MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
-
- /* handle out of order topology events */
- parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
- if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
- != 0) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
- if (sas_address_parent != ioc->sas_hba.sas_address) {
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
- sas_address_parent);
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- if (!sas_expander) {
- rc = _scsih_expander_add(ioc, parent_handle);
- if (rc != 0)
- return rc;
- }
- }
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_address = le64_to_cpu(expander_pg0.SASAddress);
- sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
- sas_address);
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
- if (sas_expander)
- return 0;
-
- sas_expander = kzalloc(sizeof(struct _sas_node),
- GFP_KERNEL);
- if (!sas_expander) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
-
- sas_expander->handle = handle;
- sas_expander->num_phys = expander_pg0.NumPhys;
- sas_expander->sas_address_parent = sas_address_parent;
- sas_expander->sas_address = sas_address;
-
- printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x),"
- " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
- handle, parent_handle, (unsigned long long)
- sas_expander->sas_address, sas_expander->num_phys);
-
- if (!sas_expander->num_phys)
- goto out_fail;
- sas_expander->phy = kcalloc(sas_expander->num_phys,
- sizeof(struct _sas_phy), GFP_KERNEL);
- if (!sas_expander->phy) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -1;
- goto out_fail;
- }
-
- INIT_LIST_HEAD(&sas_expander->sas_port_list);
- mpt2sas_port = mpt2sas_transport_port_add(ioc, handle,
- sas_address_parent);
- if (!mpt2sas_port) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -1;
- goto out_fail;
- }
- sas_expander->parent_dev = &mpt2sas_port->rphy->dev;
-
- for (i = 0 ; i < sas_expander->num_phys ; i++) {
- if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
- &expander_pg1, i, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -1;
- goto out_fail;
- }
- sas_expander->phy[i].handle = handle;
- sas_expander->phy[i].phy_id = i;
-
- if ((mpt2sas_transport_add_expander_phy(ioc,
- &sas_expander->phy[i], expander_pg1,
- sas_expander->parent_dev))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -1;
- goto out_fail;
- }
- }
-
- if (sas_expander->enclosure_handle) {
- if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
- &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
- sas_expander->enclosure_handle))) {
- sas_expander->enclosure_logical_id =
- le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
- }
- }
-
- _scsih_expander_node_add(ioc, sas_expander);
- return 0;
-
- out_fail:
-
- if (mpt2sas_port)
- mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
- sas_address_parent);
- kfree(sas_expander);
- return rc;
-}
-
-/**
- * _scsih_done - scsih callback handler.
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Callback handler when sending internal generated message frames.
- * The callback index passed is `ioc->scsih_cb_idx`
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-static u8
-_scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
-{
- MPI2DefaultReply_t *mpi_reply;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (ioc->scsih_cmds.status == MPT2_CMD_NOT_USED)
- return 1;
- if (ioc->scsih_cmds.smid != smid)
- return 1;
- ioc->scsih_cmds.status |= MPT2_CMD_COMPLETE;
- if (mpi_reply) {
- memcpy(ioc->scsih_cmds.reply, mpi_reply,
- mpi_reply->MsgLength*4);
- ioc->scsih_cmds.status |= MPT2_CMD_REPLY_VALID;
- }
- ioc->scsih_cmds.status &= ~MPT2_CMD_PENDING;
- complete(&ioc->scsih_cmds.done);
- return 1;
-}
-
-/**
- * mpt2sas_expander_remove - removing expander object
- * @ioc: per adapter object
- * @sas_address: expander sas_address
- *
- * Return nothing.
- */
-void
-mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
-{
- struct _sas_node *sas_expander;
- unsigned long flags;
-
- if (ioc->shost_recovery)
- return;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
- sas_address);
- if (sas_expander)
- list_del(&sas_expander->list);
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- if (sas_expander)
- _scsih_expander_node_remove(ioc, sas_expander);
-}
-
-/**
- * _scsih_check_access_status - check access flags
- * @ioc: per adapter object
- * @sas_address: sas address
- * @handle: sas device handle
- * @access_flags: errors returned during discovery of the device
- *
- * Return 0 for success, else failure
- */
-static u8
-_scsih_check_access_status(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
- u16 handle, u8 access_status)
-{
- u8 rc = 1;
- char *desc = NULL;
-
- switch (access_status) {
- case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS:
- case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION:
- rc = 0;
- break;
- case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED:
- desc = "sata capability failed";
- break;
- case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT:
- desc = "sata affiliation conflict";
- break;
- case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE:
- desc = "route not addressable";
- break;
- case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE:
- desc = "smp error not addressable";
- break;
- case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED:
- desc = "device blocked";
- break;
- case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE:
- case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX:
- desc = "sata initialization failed";
- break;
- default:
- desc = "unknown";
- break;
- }
-
- if (!rc)
- return 0;
-
- printk(MPT2SAS_ERR_FMT "discovery errors(%s): sas_address(0x%016llx), "
- "handle(0x%04x)\n", ioc->name, desc,
- (unsigned long long)sas_address, handle);
- return rc;
-}
-
-static void
-_scsih_check_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasDevicePage0_t sas_device_pg0;
- struct _sas_device *sas_device;
- u32 ioc_status;
- unsigned long flags;
- u64 sas_address;
- struct scsi_target *starget;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- u32 device_info;
-
-
- if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
- return;
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- return;
-
- /* check if this is end device */
- device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
- if (!(_scsih_is_end_device(device_info)))
- return;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- sas_address);
-
- if (!sas_device) {
- printk(MPT2SAS_ERR_FMT "device is not present "
- "handle(0x%04x), no sas_device!!!\n", ioc->name, handle);
- goto out_unlock;
- }
-
- if (unlikely(sas_device->handle != handle)) {
- starget = sas_device->starget;
- sas_target_priv_data = starget->hostdata;
- starget_printk(KERN_INFO, starget, "handle changed from(0x%04x)"
- " to (0x%04x)!!!\n", sas_device->handle, handle);
- sas_target_priv_data->handle = handle;
- sas_device->handle = handle;
- }
-
- /* check if device is present */
- if (!(le16_to_cpu(sas_device_pg0.Flags) &
- MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
- printk(MPT2SAS_ERR_FMT "device is not present "
- "handle(0x%04x), flags!!!\n", ioc->name, handle);
- goto out_unlock;
- }
-
- /* check if there were any issues with discovery */
- if (_scsih_check_access_status(ioc, sas_address, handle,
- sas_device_pg0.AccessStatus))
- goto out_unlock;
-
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- _scsih_ublock_io_device(ioc, sas_address);
- if (sas_device)
- sas_device_put(sas_device);
- return;
-
-out_unlock:
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device)
- sas_device_put(sas_device);
-}
-
-/**
- * _scsih_add_device - creating sas device object
- * @ioc: per adapter object
- * @handle: sas device handle
- * @phy_num: phy number end device attached to
- * @is_pd: is this hidden raid component
- *
- * Creating end device object, stored in ioc->sas_device_list.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
-{
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasDevicePage0_t sas_device_pg0;
- Mpi2SasEnclosurePage0_t enclosure_pg0;
- struct _sas_device *sas_device;
- u32 ioc_status;
- __le64 sas_address;
- u32 device_info;
-
- if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
-
- sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-
- /* check if device is present */
- if (!(le16_to_cpu(sas_device_pg0.Flags) &
- MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n",
- ioc->name, le16_to_cpu(sas_device_pg0.Flags));
- return -1;
- }
-
- /* check if there were any issues with discovery */
- if (_scsih_check_access_status(ioc, sas_address, handle,
- sas_device_pg0.AccessStatus))
- return -1;
-
- /* check if this is end device */
- device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
- if (!(_scsih_is_end_device(device_info))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
-
- sas_device = mpt2sas_get_sdev_by_addr(ioc,
- sas_address);
-
- if (sas_device) {
- sas_device_put(sas_device);
- return 0;
- }
-
- sas_device = kzalloc(sizeof(struct _sas_device),
- GFP_KERNEL);
- if (!sas_device) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
-
- kref_init(&sas_device->refcount);
- sas_device->handle = handle;
- if (_scsih_get_sas_address(ioc, le16_to_cpu
- (sas_device_pg0.ParentDevHandle),
- &sas_device->sas_address_parent) != 0)
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- sas_device->enclosure_handle =
- le16_to_cpu(sas_device_pg0.EnclosureHandle);
- sas_device->slot =
- le16_to_cpu(sas_device_pg0.Slot);
- sas_device->device_info = device_info;
- sas_device->sas_address = sas_address;
- sas_device->phy = sas_device_pg0.PhyNum;
-
- /* get enclosure_logical_id */
- if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
- ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
- sas_device->enclosure_handle)))
- sas_device->enclosure_logical_id =
- le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
-
- /* get device name */
- sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
-
- if (ioc->wait_for_discovery_to_complete)
- _scsih_sas_device_init_add(ioc, sas_device);
- else
- _scsih_sas_device_add(ioc, sas_device);
-
- sas_device_put(sas_device);
- return 0;
-}
-
-/**
- * _scsih_remove_device - removing sas device object
- * @ioc: per adapter object
- * @sas_device_delete: the sas_device object
- *
- * Return nothing.
- */
-static void
-_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_device *sas_device)
-{
- struct MPT2SAS_TARGET *sas_target_priv_data;
-
- if ((ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
- (sas_device->pfa_led_on)) {
- _scsih_turn_off_pfa_led(ioc, sas_device);
- sas_device->pfa_led_on = 0;
- }
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: "
- "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
- sas_device->handle, (unsigned long long)
- sas_device->sas_address));
-
- if (sas_device->starget && sas_device->starget->hostdata) {
- sas_target_priv_data = sas_device->starget->hostdata;
- sas_target_priv_data->deleted = 1;
- _scsih_ublock_io_device(ioc, sas_device->sas_address);
- sas_target_priv_data->handle =
- MPT2SAS_INVALID_DEVICE_HANDLE;
- }
-
- if (!ioc->hide_drives)
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
-
- printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
- "(0x%016llx)\n", ioc->name, sas_device->handle,
- (unsigned long long) sas_device->sas_address);
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: "
- "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
- sas_device->handle, (unsigned long long)
- sas_device->sas_address));
-}
-/**
- * _scsih_device_remove_by_handle - removing device object by handle
- * @ioc: per adapter object
- * @handle: device handle
- *
- * Return nothing.
- */
-static void
-_scsih_device_remove_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_device *sas_device;
- unsigned long flags;
-
- if (ioc->shost_recovery)
- return;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
- if (sas_device) {
- list_del_init(&sas_device->list);
- sas_device_put(sas_device);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- if (sas_device) {
- _scsih_remove_device(ioc, sas_device);
- sas_device_put(sas_device);
- }
-}
-
-/**
- * mpt2sas_device_remove_by_sas_address - removing device object by sas address
- * @ioc: per adapter object
- * @sas_address: device sas_address
- *
- * Return nothing.
- */
-void
-mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address)
-{
- struct _sas_device *sas_device;
- unsigned long flags;
-
- if (ioc->shost_recovery)
- return;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc, sas_address);
- if (sas_device) {
- list_del_init(&sas_device->list);
- sas_device_put(sas_device);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- if (sas_device) {
- _scsih_remove_device(ioc, sas_device);
- sas_device_put(sas_device);
- }
-}
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_topology_change_event_debug - debug for topology event
- * @ioc: per adapter object
- * @event_data: event data payload
- * Context: user.
- */
-static void
-_scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataSasTopologyChangeList_t *event_data)
-{
- int i;
- u16 handle;
- u16 reason_code;
- u8 phy_number;
- char *status_str = NULL;
- u8 link_rate, prev_link_rate;
-
- switch (event_data->ExpStatus) {
- case MPI2_EVENT_SAS_TOPO_ES_ADDED:
- status_str = "add";
- break;
- case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
- status_str = "remove";
- break;
- case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
- case 0:
- status_str = "responding";
- break;
- case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
- status_str = "remove delay";
- break;
- default:
- status_str = "unknown status";
- break;
- }
- printk(MPT2SAS_INFO_FMT "sas topology change: (%s)\n",
- ioc->name, status_str);
- printk(KERN_INFO "\thandle(0x%04x), enclosure_handle(0x%04x) "
- "start_phy(%02d), count(%d)\n",
- le16_to_cpu(event_data->ExpanderDevHandle),
- le16_to_cpu(event_data->EnclosureHandle),
- event_data->StartPhyNum, event_data->NumEntries);
- for (i = 0; i < event_data->NumEntries; i++) {
- handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
- if (!handle)
- continue;
- phy_number = event_data->StartPhyNum + i;
- reason_code = event_data->PHY[i].PhyStatus &
- MPI2_EVENT_SAS_TOPO_RC_MASK;
- switch (reason_code) {
- case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
- status_str = "target add";
- break;
- case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
- status_str = "target remove";
- break;
- case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
- status_str = "delay target remove";
- break;
- case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
- status_str = "link rate change";
- break;
- case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
- status_str = "target responding";
- break;
- default:
- status_str = "unknown";
- break;
- }
- link_rate = event_data->PHY[i].LinkRate >> 4;
- prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
- printk(KERN_INFO "\tphy(%02d), attached_handle(0x%04x): %s:"
- " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
- handle, status_str, link_rate, prev_link_rate);
-
- }
-}
-#endif
-
-/**
- * _scsih_sas_topology_change_event - handle topology changes
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- */
-static void
-_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
- int i;
- u16 parent_handle, handle;
- u16 reason_code;
- u8 phy_number, max_phys;
- struct _sas_node *sas_expander;
- u64 sas_address;
- unsigned long flags;
- u8 link_rate, prev_link_rate;
- Mpi2EventDataSasTopologyChangeList_t *event_data =
- (Mpi2EventDataSasTopologyChangeList_t *)
- fw_event->event_data;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
- _scsih_sas_topology_change_event_debug(ioc, event_data);
-#endif
-
- if (ioc->remove_host || ioc->pci_error_recovery)
- return;
-
- if (!ioc->sas_hba.num_phys)
- _scsih_sas_host_add(ioc);
- else
- _scsih_sas_host_refresh(ioc);
-
- if (fw_event->ignore) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring expander "
- "event\n", ioc->name));
- return;
- }
-
- parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
-
- /* handle expander add */
- if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
- if (_scsih_expander_add(ioc, parent_handle) != 0)
- return;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
- parent_handle);
- if (sas_expander) {
- sas_address = sas_expander->sas_address;
- max_phys = sas_expander->num_phys;
- } else if (parent_handle < ioc->sas_hba.num_phys) {
- sas_address = ioc->sas_hba.sas_address;
- max_phys = ioc->sas_hba.num_phys;
- } else {
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- return;
- }
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
- /* handle siblings events */
- for (i = 0; i < event_data->NumEntries; i++) {
- if (fw_event->ignore) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring "
- "expander event\n", ioc->name));
- return;
- }
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery)
- return;
- phy_number = event_data->StartPhyNum + i;
- if (phy_number >= max_phys)
- continue;
- reason_code = event_data->PHY[i].PhyStatus &
- MPI2_EVENT_SAS_TOPO_RC_MASK;
- if ((event_data->PHY[i].PhyStatus &
- MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
- MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
- continue;
- handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
- if (!handle)
- continue;
- link_rate = event_data->PHY[i].LinkRate >> 4;
- prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
- switch (reason_code) {
- case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
-
- if (ioc->shost_recovery)
- break;
-
- if (link_rate == prev_link_rate)
- break;
-
- mpt2sas_transport_update_links(ioc, sas_address,
- handle, phy_number, link_rate);
-
- if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
- break;
-
- _scsih_check_device(ioc, handle);
- break;
- case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
-
- if (ioc->shost_recovery)
- break;
-
- mpt2sas_transport_update_links(ioc, sas_address,
- handle, phy_number, link_rate);
-
- _scsih_add_device(ioc, handle, phy_number, 0);
- break;
- case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
-
- _scsih_device_remove_by_handle(ioc, handle);
- break;
- }
- }
-
- /* handle expander removal */
- if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
- sas_expander)
- mpt2sas_expander_remove(ioc, sas_address);
-
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_device_status_change_event_debug - debug for device event
- * @event_data: event data payload
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataSasDeviceStatusChange_t *event_data)
-{
- char *reason_str = NULL;
-
- switch (event_data->ReasonCode) {
- case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
- reason_str = "smart data";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
- reason_str = "unsupported device discovered";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
- reason_str = "internal device reset";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
- reason_str = "internal task abort";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
- reason_str = "internal task abort set";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
- reason_str = "internal clear task set";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
- reason_str = "internal query task";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
- reason_str = "sata init failure";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
- reason_str = "internal device reset complete";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
- reason_str = "internal task abort complete";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
- reason_str = "internal async notification";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
- reason_str = "expander reduced functionality";
- break;
- case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
- reason_str = "expander reduced functionality complete";
- break;
- default:
- reason_str = "unknown reason";
- break;
- }
- printk(MPT2SAS_INFO_FMT "device status change: (%s)\n"
- "\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
- ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
- (unsigned long long)le64_to_cpu(event_data->SASAddress),
- le16_to_cpu(event_data->TaskTag));
- if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
- printk(MPT2SAS_INFO_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
- event_data->ASC, event_data->ASCQ);
- printk(KERN_INFO "\n");
-}
-#endif
-
-/**
- * _scsih_sas_device_status_change_event - handle device status change
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
- struct MPT2SAS_TARGET *target_priv_data;
- struct _sas_device *sas_device;
- u64 sas_address;
- unsigned long flags;
- Mpi2EventDataSasDeviceStatusChange_t *event_data =
- (Mpi2EventDataSasDeviceStatusChange_t *)
- fw_event->event_data;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
- _scsih_sas_device_status_change_event_debug(ioc,
- event_data);
-#endif
-
- /* In MPI Revision K (0xC), the internal device reset complete was
- * implemented, so avoid setting tm_busy flag for older firmware.
- */
- if ((ioc->facts.HeaderVersion >> 8) < 0xC)
- return;
-
- if (event_data->ReasonCode !=
- MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
- event_data->ReasonCode !=
- MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
- return;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_address = le64_to_cpu(event_data->SASAddress);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- sas_address);
-
- if (!sas_device || !sas_device->starget)
- goto out;
-
- target_priv_data = sas_device->starget->hostdata;
- if (!target_priv_data)
- goto out;
-
- if (event_data->ReasonCode ==
- MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
- target_priv_data->tm_busy = 1;
- else
- target_priv_data->tm_busy = 0;
-
-out:
- if (sas_device)
- sas_device_put(sas_device);
-
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event
- * @ioc: per adapter object
- * @event_data: event data payload
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataSasEnclDevStatusChange_t *event_data)
-{
- char *reason_str = NULL;
-
- switch (event_data->ReasonCode) {
- case MPI2_EVENT_SAS_ENCL_RC_ADDED:
- reason_str = "enclosure add";
- break;
- case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
- reason_str = "enclosure remove";
- break;
- default:
- reason_str = "unknown reason";
- break;
- }
-
- printk(MPT2SAS_INFO_FMT "enclosure status change: (%s)\n"
- "\thandle(0x%04x), enclosure logical id(0x%016llx)"
- " number slots(%d)\n", ioc->name, reason_str,
- le16_to_cpu(event_data->EnclosureHandle),
- (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
- le16_to_cpu(event_data->StartSlot));
-}
-#endif
-
-/**
- * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
- _scsih_sas_enclosure_dev_status_change_event_debug(ioc,
- (Mpi2EventDataSasEnclDevStatusChange_t *)
- fw_event->event_data);
-#endif
-}
-
-/**
- * _scsih_sas_broadcast_primitive_event - handle broadcast events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_broadcast_primitive_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
- struct scsi_cmnd *scmd;
- struct scsi_device *sdev;
- u16 smid, handle;
- u32 lun;
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- u32 termination_count;
- u32 query_count;
- Mpi2SCSITaskManagementReply_t *mpi_reply;
- Mpi2EventDataSasBroadcastPrimitive_t *event_data =
- (Mpi2EventDataSasBroadcastPrimitive_t *)
- fw_event->event_data;
- u16 ioc_status;
- unsigned long flags;
- int r;
- u8 max_retries = 0;
- u8 task_abort_retries;
-
- mutex_lock(&ioc->tm_cmds.mutex);
- pr_info(MPT2SAS_FMT
- "%s: enter: phy number(%d), width(%d)\n",
- ioc->name, __func__, event_data->PhyNum,
- event_data->PortWidth);
-
- _scsih_block_io_all_device(ioc);
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- mpi_reply = ioc->tm_cmds.reply;
-broadcast_aen_retry:
-
- /* sanity checks for retrying this loop */
- if (max_retries++ == 5) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: giving up\n",
- ioc->name, __func__));
- goto out;
- } else if (max_retries > 1)
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %d retry\n",
- ioc->name, __func__, max_retries - 1));
-
- termination_count = 0;
- query_count = 0;
- for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
- if (ioc->shost_recovery)
- goto out;
- scmd = _scsih_scsi_lookup_get(ioc, smid);
- if (!scmd)
- continue;
- sdev = scmd->device;
- sas_device_priv_data = sdev->hostdata;
- if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
- continue;
- /* skip hidden raid components */
- if (sas_device_priv_data->sas_target->flags &
- MPT_TARGET_FLAGS_RAID_COMPONENT)
- continue;
- /* skip volumes */
- if (sas_device_priv_data->sas_target->flags &
- MPT_TARGET_FLAGS_VOLUME)
- continue;
-
- handle = sas_device_priv_data->sas_target->handle;
- lun = sas_device_priv_data->lun;
- query_count++;
-
- if (ioc->shost_recovery)
- goto out;
-
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- r = mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
- MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30,
- TM_MUTEX_OFF);
- if (r == FAILED) {
- sdev_printk(KERN_WARNING, sdev,
- "mpt2sas_scsih_issue_tm: FAILED when sending "
- "QUERY_TASK: scmd(%p)\n", scmd);
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- goto broadcast_aen_retry;
- }
- ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
- & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- sdev_printk(KERN_WARNING, sdev, "query task: FAILED "
- "with IOCSTATUS(0x%04x), scmd(%p)\n", ioc_status,
- scmd);
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- goto broadcast_aen_retry;
- }
-
- /* see if IO is still owned by IOC and target */
- if (mpi_reply->ResponseCode ==
- MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
- mpi_reply->ResponseCode ==
- MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) {
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- continue;
- }
- task_abort_retries = 0;
- tm_retry:
- if (task_abort_retries++ == 60) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "%s: ABORT_TASK: giving up\n", ioc->name,
- __func__));
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- goto broadcast_aen_retry;
- }
-
- if (ioc->shost_recovery)
- goto out_no_lock;
-
- r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
- sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30,
- TM_MUTEX_OFF);
- if (r == FAILED) {
- sdev_printk(KERN_WARNING, sdev,
- "mpt2sas_scsih_issue_tm: ABORT_TASK: FAILED : "
- "scmd(%p)\n", scmd);
- goto tm_retry;
- }
-
- if (task_abort_retries > 1)
- sdev_printk(KERN_WARNING, sdev,
- "mpt2sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):"
- " scmd(%p)\n",
- task_abort_retries - 1, scmd);
-
- termination_count += le32_to_cpu(mpi_reply->TerminationCount);
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- }
-
- if (ioc->broadcast_aen_pending) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: loop back due to"
- " pending AEN\n", ioc->name, __func__));
- ioc->broadcast_aen_pending = 0;
- goto broadcast_aen_retry;
- }
-
- out:
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- out_no_lock:
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "%s - exit, query_count = %d termination_count = %d\n",
- ioc->name, __func__, query_count, termination_count));
-
- ioc->broadcast_aen_busy = 0;
- if (!ioc->shost_recovery)
- _scsih_ublock_io_all_device(ioc);
- mutex_unlock(&ioc->tm_cmds.mutex);
-}
-
-/**
- * _scsih_sas_discovery_event - handle discovery events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
- Mpi2EventDataSasDiscovery_t *event_data =
- (Mpi2EventDataSasDiscovery_t *)
- fw_event->event_data;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
- printk(MPT2SAS_INFO_FMT "discovery event: (%s)", ioc->name,
- (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
- "start" : "stop");
- if (event_data->DiscoveryStatus)
- printk("discovery_status(0x%08x)",
- le32_to_cpu(event_data->DiscoveryStatus));
- printk("\n");
- }
-#endif
-
- if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
- !ioc->sas_hba.num_phys) {
- if (disable_discovery > 0 && ioc->shost_recovery) {
- /* Wait for the reset to complete */
- while (ioc->shost_recovery)
- ssleep(1);
- }
- _scsih_sas_host_add(ioc);
- }
-}
-
-/**
- * _scsih_reprobe_lun - reprobing lun
- * @sdev: scsi device struct
- * @no_uld_attach: sdev->no_uld_attach flag setting
- *
- **/
-static void
-_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
-{
- int rc;
-
- sdev->no_uld_attach = no_uld_attach ? 1 : 0;
- sdev_printk(KERN_INFO, sdev, "%s raid component\n",
- sdev->no_uld_attach ? "hidding" : "exposing");
- rc = scsi_device_reprobe(sdev);
-}
-
-/**
- * _scsih_sas_volume_add - add new volume
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventIrConfigElement_t *element)
-{
- struct _raid_device *raid_device;
- unsigned long flags;
- u64 wwid;
- u16 handle = le16_to_cpu(element->VolDevHandle);
- int rc;
-
- mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
- if (!wwid) {
- printk(MPT2SAS_ERR_FMT
- "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__);
- return;
- }
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-
- if (raid_device)
- return;
-
- raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
- if (!raid_device) {
- printk(MPT2SAS_ERR_FMT
- "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__);
- return;
- }
-
- raid_device->id = ioc->sas_id++;
- raid_device->channel = RAID_CHANNEL;
- raid_device->handle = handle;
- raid_device->wwid = wwid;
- _scsih_raid_device_add(ioc, raid_device);
- if (!ioc->wait_for_discovery_to_complete) {
- rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
- raid_device->id, 0);
- if (rc)
- _scsih_raid_device_remove(ioc, raid_device);
- } else {
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- _scsih_determine_boot_device(ioc, raid_device, 1);
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- }
-}
-
-/**
- * _scsih_sas_volume_delete - delete volume
- * @ioc: per adapter object
- * @handle: volume device handle
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _raid_device *raid_device;
- unsigned long flags;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct scsi_target *starget = NULL;
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
- if (raid_device) {
- if (raid_device->starget) {
- starget = raid_device->starget;
- sas_target_priv_data = starget->hostdata;
- sas_target_priv_data->deleted = 1;
- }
- printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
- "(0x%016llx)\n", ioc->name, raid_device->handle,
- (unsigned long long) raid_device->wwid);
- list_del(&raid_device->list);
- kfree(raid_device);
- }
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- if (starget)
- scsi_remove_target(&starget->dev);
-}
-
-/**
- * _scsih_sas_pd_expose - expose pd component to /dev/sdX
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventIrConfigElement_t *element)
-{
- struct _sas_device *sas_device;
- struct scsi_target *starget = NULL;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- unsigned long flags;
- u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
- if (sas_device) {
- sas_device->volume_handle = 0;
- sas_device->volume_wwid = 0;
- clear_bit(handle, ioc->pd_handles);
- if (sas_device->starget && sas_device->starget->hostdata) {
- starget = sas_device->starget;
- sas_target_priv_data = starget->hostdata;
- sas_target_priv_data->flags &=
- ~MPT_TARGET_FLAGS_RAID_COMPONENT;
- }
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (!sas_device)
- return;
-
- /* exposing raid component */
- if (starget)
- starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
-
- sas_device_put(sas_device);
-}
-
-/**
- * _scsih_sas_pd_hide - hide pd component from /dev/sdX
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventIrConfigElement_t *element)
-{
- struct _sas_device *sas_device;
- struct scsi_target *starget = NULL;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- unsigned long flags;
- u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
- u16 volume_handle = 0;
- u64 volume_wwid = 0;
-
- mpt2sas_config_get_volume_handle(ioc, handle, &volume_handle);
- if (volume_handle)
- mpt2sas_config_get_volume_wwid(ioc, volume_handle,
- &volume_wwid);
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
- if (sas_device) {
- set_bit(handle, ioc->pd_handles);
- if (sas_device->starget && sas_device->starget->hostdata) {
- starget = sas_device->starget;
- sas_target_priv_data = starget->hostdata;
- sas_target_priv_data->flags |=
- MPT_TARGET_FLAGS_RAID_COMPONENT;
- sas_device->volume_handle = volume_handle;
- sas_device->volume_wwid = volume_wwid;
- }
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (!sas_device)
- return;
-
- /* hiding raid component */
- if (starget)
- starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
-
- sas_device_put(sas_device);
-}
-
-/**
- * _scsih_sas_pd_delete - delete pd component
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventIrConfigElement_t *element)
-{
- u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
-
- _scsih_device_remove_by_handle(ioc, handle);
-}
-
-/**
- * _scsih_sas_pd_add - remove pd component
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventIrConfigElement_t *element)
-{
- struct _sas_device *sas_device;
- u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasDevicePage0_t sas_device_pg0;
- u32 ioc_status;
- u64 sas_address;
- u16 parent_handle;
-
- set_bit(handle, ioc->pd_handles);
-
- sas_device = mpt2sas_get_sdev_by_handle(ioc, handle);
- if (sas_device) {
- sas_device_put(sas_device);
- return;
- }
-
- if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
- if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
- mpt2sas_transport_update_links(ioc, sas_address, handle,
- sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
-
- _scsih_add_device(ioc, handle, 0, 1);
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
- * @ioc: per adapter object
- * @event_data: event data payload
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataIrConfigChangeList_t *event_data)
-{
- Mpi2EventIrConfigElement_t *element;
- u8 element_type;
- int i;
- char *reason_str = NULL, *element_str = NULL;
-
- element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
-
- printk(MPT2SAS_INFO_FMT "raid config change: (%s), elements(%d)\n",
- ioc->name, (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
- "foreign" : "native", event_data->NumElements);
- for (i = 0; i < event_data->NumElements; i++, element++) {
- switch (element->ReasonCode) {
- case MPI2_EVENT_IR_CHANGE_RC_ADDED:
- reason_str = "add";
- break;
- case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
- reason_str = "remove";
- break;
- case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
- reason_str = "no change";
- break;
- case MPI2_EVENT_IR_CHANGE_RC_HIDE:
- reason_str = "hide";
- break;
- case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
- reason_str = "unhide";
- break;
- case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
- reason_str = "volume_created";
- break;
- case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
- reason_str = "volume_deleted";
- break;
- case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
- reason_str = "pd_created";
- break;
- case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
- reason_str = "pd_deleted";
- break;
- default:
- reason_str = "unknown reason";
- break;
- }
- element_type = le16_to_cpu(element->ElementFlags) &
- MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
- switch (element_type) {
- case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
- element_str = "volume";
- break;
- case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
- element_str = "phys disk";
- break;
- case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
- element_str = "hot spare";
- break;
- default:
- element_str = "unknown element";
- break;
- }
- printk(KERN_INFO "\t(%s:%s), vol handle(0x%04x), "
- "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
- reason_str, le16_to_cpu(element->VolDevHandle),
- le16_to_cpu(element->PhysDiskDevHandle),
- element->PhysDiskNum);
- }
-}
-#endif
-
-/**
- * _scsih_sas_ir_config_change_event - handle ir configuration change events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
- Mpi2EventIrConfigElement_t *element;
- int i;
- u8 foreign_config;
- Mpi2EventDataIrConfigChangeList_t *event_data =
- (Mpi2EventDataIrConfigChangeList_t *)
- fw_event->event_data;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
- && !ioc->hide_ir_msg)
- _scsih_sas_ir_config_change_event_debug(ioc, event_data);
-
-#endif
-
- if (ioc->shost_recovery)
- return;
-
- foreign_config = (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
-
- element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
- for (i = 0; i < event_data->NumElements; i++, element++) {
-
- switch (element->ReasonCode) {
- case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
- case MPI2_EVENT_IR_CHANGE_RC_ADDED:
- if (!foreign_config)
- _scsih_sas_volume_add(ioc, element);
- break;
- case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
- case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
- if (!foreign_config)
- _scsih_sas_volume_delete(ioc,
- le16_to_cpu(element->VolDevHandle));
- break;
- case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
- if (!ioc->is_warpdrive)
- _scsih_sas_pd_hide(ioc, element);
- break;
- case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
- if (!ioc->is_warpdrive)
- _scsih_sas_pd_expose(ioc, element);
- break;
- case MPI2_EVENT_IR_CHANGE_RC_HIDE:
- if (!ioc->is_warpdrive)
- _scsih_sas_pd_add(ioc, element);
- break;
- case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
- if (!ioc->is_warpdrive)
- _scsih_sas_pd_delete(ioc, element);
- break;
- }
- }
-}
-
-/**
- * _scsih_sas_ir_volume_event - IR volume event
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
- u64 wwid;
- unsigned long flags;
- struct _raid_device *raid_device;
- u16 handle;
- u32 state;
- int rc;
- Mpi2EventDataIrVolume_t *event_data =
- (Mpi2EventDataIrVolume_t *)
- fw_event->event_data;
-
- if (ioc->shost_recovery)
- return;
-
- if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
- return;
-
- handle = le16_to_cpu(event_data->VolDevHandle);
- state = le32_to_cpu(event_data->NewValue);
- if (!ioc->hide_ir_msg)
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
- "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
- le32_to_cpu(event_data->PreviousValue), state));
-
- switch (state) {
- case MPI2_RAID_VOL_STATE_MISSING:
- case MPI2_RAID_VOL_STATE_FAILED:
- _scsih_sas_volume_delete(ioc, handle);
- break;
-
- case MPI2_RAID_VOL_STATE_ONLINE:
- case MPI2_RAID_VOL_STATE_DEGRADED:
- case MPI2_RAID_VOL_STATE_OPTIMAL:
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-
- if (raid_device)
- break;
-
- mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
- if (!wwid) {
- printk(MPT2SAS_ERR_FMT
- "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__);
- break;
- }
-
- raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
- if (!raid_device) {
- printk(MPT2SAS_ERR_FMT
- "failure at %s:%d/%s()!\n", ioc->name,
- __FILE__, __LINE__, __func__);
- break;
- }
-
- raid_device->id = ioc->sas_id++;
- raid_device->channel = RAID_CHANNEL;
- raid_device->handle = handle;
- raid_device->wwid = wwid;
- _scsih_raid_device_add(ioc, raid_device);
- rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
- raid_device->id, 0);
- if (rc)
- _scsih_raid_device_remove(ioc, raid_device);
- break;
-
- case MPI2_RAID_VOL_STATE_INITIALIZING:
- default:
- break;
- }
-}
-
-/**
- * _scsih_sas_ir_physical_disk_event - PD event
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
- u16 handle, parent_handle;
- u32 state;
- struct _sas_device *sas_device;
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasDevicePage0_t sas_device_pg0;
- u32 ioc_status;
- Mpi2EventDataIrPhysicalDisk_t *event_data =
- (Mpi2EventDataIrPhysicalDisk_t *)
- fw_event->event_data;
- u64 sas_address;
-
- if (ioc->shost_recovery)
- return;
-
- if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
- return;
-
- handle = le16_to_cpu(event_data->PhysDiskDevHandle);
- state = le32_to_cpu(event_data->NewValue);
-
- if (!ioc->hide_ir_msg)
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
- "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
- le32_to_cpu(event_data->PreviousValue), state));
-
- switch (state) {
- case MPI2_RAID_PD_STATE_ONLINE:
- case MPI2_RAID_PD_STATE_DEGRADED:
- case MPI2_RAID_PD_STATE_REBUILDING:
- case MPI2_RAID_PD_STATE_OPTIMAL:
- case MPI2_RAID_PD_STATE_HOT_SPARE:
-
- if (!ioc->is_warpdrive)
- set_bit(handle, ioc->pd_handles);
-
- sas_device = mpt2sas_get_sdev_by_handle(ioc, handle);
- if (sas_device) {
- sas_device_put(sas_device);
- return;
- }
-
- if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
- &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
- handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
- if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
- mpt2sas_transport_update_links(ioc, sas_address, handle,
- sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
-
- _scsih_add_device(ioc, handle, 0, 1);
-
- break;
-
- case MPI2_RAID_PD_STATE_OFFLINE:
- case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
- case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
- default:
- break;
- }
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
- * @ioc: per adapter object
- * @event_data: event data payload
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventDataIrOperationStatus_t *event_data)
-{
- char *reason_str = NULL;
-
- switch (event_data->RAIDOperation) {
- case MPI2_EVENT_IR_RAIDOP_RESYNC:
- reason_str = "resync";
- break;
- case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
- reason_str = "online capacity expansion";
- break;
- case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
- reason_str = "consistency check";
- break;
- case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
- reason_str = "background init";
- break;
- case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
- reason_str = "make data consistent";
- break;
- }
-
- if (!reason_str)
- return;
-
- printk(MPT2SAS_INFO_FMT "raid operational status: (%s)"
- "\thandle(0x%04x), percent complete(%d)\n",
- ioc->name, reason_str,
- le16_to_cpu(event_data->VolDevHandle),
- event_data->PercentComplete);
-}
-#endif
-
-/**
- * _scsih_sas_ir_operation_status_event - handle RAID operation events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
- struct fw_event_work *fw_event)
-{
- Mpi2EventDataIrOperationStatus_t *event_data =
- (Mpi2EventDataIrOperationStatus_t *)
- fw_event->event_data;
- static struct _raid_device *raid_device;
- unsigned long flags;
- u16 handle;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
- && !ioc->hide_ir_msg)
- _scsih_sas_ir_operation_status_event_debug(ioc,
- event_data);
-#endif
-
- /* code added for raid transport support */
- if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- handle = le16_to_cpu(event_data->VolDevHandle);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
- if (raid_device)
- raid_device->percent_complete =
- event_data->PercentComplete;
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- }
-}
-
-/**
- * _scsih_prep_device_scan - initialize parameters prior to device scan
- * @ioc: per adapter object
- *
- * Set the deleted flag prior to device scan. If the device is found during
- * the scan, then we clear the deleted flag.
- */
-static void
-_scsih_prep_device_scan(struct MPT2SAS_ADAPTER *ioc)
-{
- struct MPT2SAS_DEVICE *sas_device_priv_data;
- struct scsi_device *sdev;
-
- shost_for_each_device(sdev, ioc->shost) {
- sas_device_priv_data = sdev->hostdata;
- if (sas_device_priv_data && sas_device_priv_data->sas_target)
- sas_device_priv_data->sas_target->deleted = 1;
- }
-}
-
-/**
- * _scsih_mark_responding_sas_device - mark a sas_devices as responding
- * @ioc: per adapter object
- * @sas_address: sas address
- * @slot: enclosure slot id
- * @handle: device handle
- *
- * After host reset, find out whether devices are still responding.
- * Used in _scsi_remove_unresponsive_sas_devices.
- *
- * Return nothing.
- */
-static void
-_scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
- u16 slot, u16 handle)
-{
- struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
- struct scsi_target *starget;
- struct _sas_device *sas_device;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
- if (sas_device->sas_address == sas_address &&
- sas_device->slot == slot) {
- sas_device->responding = 1;
- starget = sas_device->starget;
- if (starget && starget->hostdata) {
- sas_target_priv_data = starget->hostdata;
- sas_target_priv_data->tm_busy = 0;
- sas_target_priv_data->deleted = 0;
- } else
- sas_target_priv_data = NULL;
- if (starget)
- starget_printk(KERN_INFO, starget,
- "handle(0x%04x), sas_addr(0x%016llx), "
- "enclosure logical id(0x%016llx), "
- "slot(%d)\n", handle,
- (unsigned long long)sas_device->sas_address,
- (unsigned long long)
- sas_device->enclosure_logical_id,
- sas_device->slot);
- if (sas_device->handle == handle)
- goto out;
- printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
- sas_device->handle);
- sas_device->handle = handle;
- if (sas_target_priv_data)
- sas_target_priv_data->handle = handle;
- goto out;
- }
- }
- out:
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-}
-
-/**
- * _scsih_search_responding_sas_devices -
- * @ioc: per adapter object
- *
- * After host reset, find out whether devices are still responding.
- * If not remove.
- *
- * Return nothing.
- */
-static void
-_scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2SasDevicePage0_t sas_device_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u16 ioc_status;
- __le64 sas_address;
- u16 handle;
- u32 device_info;
- u16 slot;
-
- printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name);
-
- if (list_empty(&ioc->sas_device_list))
- goto out;
-
- handle = 0xFFFF;
- while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
- &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
- handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- break;
- handle = le16_to_cpu(sas_device_pg0.DevHandle);
- device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
- if (!(_scsih_is_end_device(device_info)))
- continue;
- sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
- slot = le16_to_cpu(sas_device_pg0.Slot);
- _scsih_mark_responding_sas_device(ioc, sas_address, slot,
- handle);
- }
-out:
- printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n",
- ioc->name);
-}
-
-/**
- * _scsih_mark_responding_raid_device - mark a raid_device as responding
- * @ioc: per adapter object
- * @wwid: world wide identifier for raid volume
- * @handle: device handle
- *
- * After host reset, find out whether devices are still responding.
- * Used in _scsi_remove_unresponsive_raid_devices.
- *
- * Return nothing.
- */
-static void
-_scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid,
- u16 handle)
-{
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct scsi_target *starget;
- struct _raid_device *raid_device;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
- if (raid_device->wwid == wwid && raid_device->starget) {
- starget = raid_device->starget;
- if (starget && starget->hostdata) {
- sas_target_priv_data = starget->hostdata;
- sas_target_priv_data->deleted = 0;
- } else
- sas_target_priv_data = NULL;
- raid_device->responding = 1;
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- starget_printk(KERN_INFO, raid_device->starget,
- "handle(0x%04x), wwid(0x%016llx)\n", handle,
- (unsigned long long)raid_device->wwid);
- /*
- * WARPDRIVE: The handles of the PDs might have changed
- * across the host reset so re-initialize the
- * required data for Direct IO
- */
- _scsih_init_warpdrive_properties(ioc, raid_device);
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- if (raid_device->handle == handle) {
- spin_unlock_irqrestore(&ioc->raid_device_lock,
- flags);
- return;
- }
- printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
- raid_device->handle);
- raid_device->handle = handle;
- if (sas_target_priv_data)
- sas_target_priv_data->handle = handle;
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- return;
- }
- }
-
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-}
-
-/**
- * _scsih_search_responding_raid_devices -
- * @ioc: per adapter object
- *
- * After host reset, find out whether devices are still responding.
- * If not remove.
- *
- * Return nothing.
- */
-static void
-_scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2RaidVolPage1_t volume_pg1;
- Mpi2RaidVolPage0_t volume_pg0;
- Mpi2RaidPhysDiskPage0_t pd_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u16 ioc_status;
- u16 handle;
- u8 phys_disk_num;
-
- if (!ioc->ir_firmware)
- return;
-
- printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n",
- ioc->name);
-
- if (list_empty(&ioc->raid_device_list))
- goto out;
-
- handle = 0xFFFF;
- while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
- &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- break;
- handle = le16_to_cpu(volume_pg1.DevHandle);
-
- if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
- &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
- sizeof(Mpi2RaidVolPage0_t)))
- continue;
-
- if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
- volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
- volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED)
- _scsih_mark_responding_raid_device(ioc,
- le64_to_cpu(volume_pg1.WWID), handle);
- }
-
- /* refresh the pd_handles */
- if (!ioc->is_warpdrive) {
- phys_disk_num = 0xFF;
- memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
- while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
- &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
- phys_disk_num))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- break;
- phys_disk_num = pd_pg0.PhysDiskNum;
- handle = le16_to_cpu(pd_pg0.DevHandle);
- set_bit(handle, ioc->pd_handles);
- }
- }
-out:
- printk(MPT2SAS_INFO_FMT "search for responding raid volumes: "
- "complete\n", ioc->name);
-}
-
-/**
- * _scsih_mark_responding_expander - mark a expander as responding
- * @ioc: per adapter object
- * @sas_address: sas address
- * @handle:
- *
- * After host reset, find out whether devices are still responding.
- * Used in _scsi_remove_unresponsive_expanders.
- *
- * Return nothing.
- */
-static void
-_scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
- u16 handle)
-{
- struct _sas_node *sas_expander;
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
- if (sas_expander->sas_address != sas_address)
- continue;
- sas_expander->responding = 1;
- if (sas_expander->handle == handle)
- goto out;
- printk(KERN_INFO "\texpander(0x%016llx): handle changed"
- " from(0x%04x) to (0x%04x)!!!\n",
- (unsigned long long)sas_expander->sas_address,
- sas_expander->handle, handle);
- sas_expander->handle = handle;
- for (i = 0 ; i < sas_expander->num_phys ; i++)
- sas_expander->phy[i].handle = handle;
- goto out;
- }
- out:
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-}
-
-/**
- * _scsih_search_responding_expanders -
- * @ioc: per adapter object
- *
- * After host reset, find out whether devices are still responding.
- * If not remove.
- *
- * Return nothing.
- */
-static void
-_scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2ExpanderPage0_t expander_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u16 ioc_status;
- u64 sas_address;
- u16 handle;
-
- printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name);
-
- if (list_empty(&ioc->sas_expander_list))
- goto out;
-
- handle = 0xFFFF;
- while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
- MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- break;
-
- handle = le16_to_cpu(expander_pg0.DevHandle);
- sas_address = le64_to_cpu(expander_pg0.SASAddress);
- printk(KERN_INFO "\texpander present: handle(0x%04x), "
- "sas_addr(0x%016llx)\n", handle,
- (unsigned long long)sas_address);
- _scsih_mark_responding_expander(ioc, sas_address, handle);
- }
-
- out:
- printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name);
-}
-
-/**
- * _scsih_remove_unresponding_sas_devices - removing unresponding devices
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
-{
- struct _sas_device *sas_device, *sas_device_next;
- struct _sas_node *sas_expander, *sas_expander_next;
- struct _raid_device *raid_device, *raid_device_next;
- struct list_head tmp_list;
- unsigned long flags;
- LIST_HEAD(head);
-
- printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n",
- ioc->name);
-
- /* removing unresponding end devices */
- printk(MPT2SAS_INFO_FMT "removing unresponding devices: end-devices\n",
- ioc->name);
-
- /*
- * Iterate, pulling off devices marked as non-responding. We become the
- * owner for the reference the list had on any object we prune.
- */
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- list_for_each_entry_safe(sas_device, sas_device_next,
- &ioc->sas_device_list, list) {
- if (!sas_device->responding)
- list_move_tail(&sas_device->list, &head);
- else
- sas_device->responding = 0;
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- /*
- * Now, uninitialize and remove the unresponding devices we pruned.
- */
- list_for_each_entry_safe(sas_device, sas_device_next, &head, list) {
- _scsih_remove_device(ioc, sas_device);
- list_del_init(&sas_device->list);
- sas_device_put(sas_device);
- }
-
- /* removing unresponding volumes */
- if (ioc->ir_firmware) {
- printk(MPT2SAS_INFO_FMT "removing unresponding devices: "
- "volumes\n", ioc->name);
- list_for_each_entry_safe(raid_device, raid_device_next,
- &ioc->raid_device_list, list) {
- if (!raid_device->responding)
- _scsih_sas_volume_delete(ioc,
- raid_device->handle);
- else
- raid_device->responding = 0;
- }
- }
- /* removing unresponding expanders */
- printk(MPT2SAS_INFO_FMT "removing unresponding devices: expanders\n",
- ioc->name);
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- INIT_LIST_HEAD(&tmp_list);
- list_for_each_entry_safe(sas_expander, sas_expander_next,
- &ioc->sas_expander_list, list) {
- if (!sas_expander->responding)
- list_move_tail(&sas_expander->list, &tmp_list);
- else
- sas_expander->responding = 0;
- }
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list,
- list) {
- list_del(&sas_expander->list);
- _scsih_expander_node_remove(ioc, sas_expander);
- }
- printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n",
- ioc->name);
- /* unblock devices */
- _scsih_ublock_io_all_device(ioc);
-}
-
-static void
-_scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_node *sas_expander, u16 handle)
-{
- Mpi2ExpanderPage1_t expander_pg1;
- Mpi2ConfigReply_t mpi_reply;
- int i;
-
- for (i = 0 ; i < sas_expander->num_phys ; i++) {
- if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
- &expander_pg1, i, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- mpt2sas_transport_update_links(ioc, sas_expander->sas_address,
- le16_to_cpu(expander_pg1.AttachedDevHandle), i,
- expander_pg1.NegotiatedLinkRate >> 4);
- }
-}
-
-/**
- * _scsih_scan_for_devices_after_reset - scan for devices after host reset
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2ExpanderPage0_t expander_pg0;
- Mpi2SasDevicePage0_t sas_device_pg0;
- Mpi2RaidVolPage1_t volume_pg1;
- Mpi2RaidVolPage0_t volume_pg0;
- Mpi2RaidPhysDiskPage0_t pd_pg0;
- Mpi2EventIrConfigElement_t element;
- Mpi2ConfigReply_t mpi_reply;
- u8 phys_disk_num;
- u16 ioc_status;
- u16 handle, parent_handle;
- u64 sas_address;
- struct _sas_device *sas_device;
- struct _sas_node *expander_device;
- static struct _raid_device *raid_device;
- u8 retry_count;
- unsigned long flags;
-
- printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
-
- _scsih_sas_host_refresh(ioc);
-
- printk(MPT2SAS_INFO_FMT "\tscan devices: expanders start\n",
- ioc->name);
- /* expanders */
- handle = 0xFFFF;
- while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
- MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_INFO_FMT "\tbreak from expander scan: "
- "ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, ioc_status,
- le32_to_cpu(mpi_reply.IOCLogInfo));
- break;
- }
- handle = le16_to_cpu(expander_pg0.DevHandle);
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- expander_device = mpt2sas_scsih_expander_find_by_sas_address(
- ioc, le64_to_cpu(expander_pg0.SASAddress));
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- if (expander_device)
- _scsih_refresh_expander_links(ioc, expander_device,
- handle);
- else {
- printk(MPT2SAS_INFO_FMT "\tBEFORE adding expander: "
- "handle (0x%04x), sas_addr(0x%016llx)\n",
- ioc->name, handle, (unsigned long long)
- le64_to_cpu(expander_pg0.SASAddress));
- _scsih_expander_add(ioc, handle);
- printk(MPT2SAS_INFO_FMT "\tAFTER adding expander: "
- "handle (0x%04x), sas_addr(0x%016llx)\n",
- ioc->name, handle, (unsigned long long)
- le64_to_cpu(expander_pg0.SASAddress));
- }
- }
-
- printk(MPT2SAS_INFO_FMT "\tscan devices: expanders complete\n",
- ioc->name);
-
- if (!ioc->ir_firmware)
- goto skip_to_sas;
-
- printk(MPT2SAS_INFO_FMT "\tscan devices phys disk start\n", ioc->name);
- /* phys disk */
- phys_disk_num = 0xFF;
- while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
- &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
- phys_disk_num))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan:"
- "ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, ioc_status,
- le32_to_cpu(mpi_reply.IOCLogInfo));
- break;
- }
- phys_disk_num = pd_pg0.PhysDiskNum;
- handle = le16_to_cpu(pd_pg0.DevHandle);
- sas_device = mpt2sas_get_sdev_by_handle(ioc, handle);
- if (sas_device) {
- sas_device_put(sas_device);
- continue;
- }
- if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
- &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
- handle) != 0)
- continue;
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan "
- "ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, ioc_status,
- le32_to_cpu(mpi_reply.IOCLogInfo));
- break;
- }
- parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
- if (!_scsih_get_sas_address(ioc, parent_handle,
- &sas_address)) {
- printk(MPT2SAS_INFO_FMT "\tBEFORE adding phys disk: "
- " handle (0x%04x), sas_addr(0x%016llx)\n",
- ioc->name, handle, (unsigned long long)
- le64_to_cpu(sas_device_pg0.SASAddress));
- mpt2sas_transport_update_links(ioc, sas_address,
- handle, sas_device_pg0.PhyNum,
- MPI2_SAS_NEG_LINK_RATE_1_5);
- set_bit(handle, ioc->pd_handles);
- retry_count = 0;
- /* This will retry adding the end device.
- * _scsih_add_device() will decide on retries and
- * return "1" when it should be retried
- */
- while (_scsih_add_device(ioc, handle, retry_count++,
- 1)) {
- ssleep(1);
- }
- printk(MPT2SAS_INFO_FMT "\tAFTER adding phys disk: "
- " handle (0x%04x), sas_addr(0x%016llx)\n",
- ioc->name, handle, (unsigned long long)
- le64_to_cpu(sas_device_pg0.SASAddress));
- }
- }
-
- printk(MPT2SAS_INFO_FMT "\tscan devices: phys disk complete\n",
- ioc->name);
-
- printk(MPT2SAS_INFO_FMT "\tscan devices: volumes start\n", ioc->name);
- /* volumes */
- handle = 0xFFFF;
- while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
- &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
- "ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, ioc_status,
- le32_to_cpu(mpi_reply.IOCLogInfo));
- break;
- }
- handle = le16_to_cpu(volume_pg1.DevHandle);
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_wwid(ioc,
- le64_to_cpu(volume_pg1.WWID));
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- if (raid_device)
- continue;
- if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
- &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
- sizeof(Mpi2RaidVolPage0_t)))
- continue;
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
- "ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, ioc_status,
- le32_to_cpu(mpi_reply.IOCLogInfo));
- break;
- }
- if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
- volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
- volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
- memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
- element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
- element.VolDevHandle = volume_pg1.DevHandle;
- printk(MPT2SAS_INFO_FMT "\tBEFORE adding volume: "
- " handle (0x%04x)\n", ioc->name,
- volume_pg1.DevHandle);
- _scsih_sas_volume_add(ioc, &element);
- printk(MPT2SAS_INFO_FMT "\tAFTER adding volume: "
- " handle (0x%04x)\n", ioc->name,
- volume_pg1.DevHandle);
- }
- }
-
- printk(MPT2SAS_INFO_FMT "\tscan devices: volumes complete\n",
- ioc->name);
-
- skip_to_sas:
-
- printk(MPT2SAS_INFO_FMT "\tscan devices: end devices start\n",
- ioc->name);
- /* sas devices */
- handle = 0xFFFF;
- while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
- &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
- handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_INFO_FMT "\tbreak from end device scan:"
- " ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, ioc_status,
- le32_to_cpu(mpi_reply.IOCLogInfo));
- break;
- }
- handle = le16_to_cpu(sas_device_pg0.DevHandle);
- if (!(_scsih_is_end_device(
- le32_to_cpu(sas_device_pg0.DeviceInfo))))
- continue;
- sas_device = mpt2sas_get_sdev_by_addr(ioc,
- le64_to_cpu(sas_device_pg0.SASAddress));
- if (sas_device) {
- sas_device_put(sas_device);
- continue;
- }
- parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
- if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
- printk(MPT2SAS_INFO_FMT "\tBEFORE adding end device: "
- "handle (0x%04x), sas_addr(0x%016llx)\n",
- ioc->name, handle, (unsigned long long)
- le64_to_cpu(sas_device_pg0.SASAddress));
- mpt2sas_transport_update_links(ioc, sas_address, handle,
- sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
- retry_count = 0;
- /* This will retry adding the end device.
- * _scsih_add_device() will decide on retries and
- * return "1" when it should be retried
- */
- while (_scsih_add_device(ioc, handle, retry_count++,
- 0)) {
- ssleep(1);
- }
- printk(MPT2SAS_INFO_FMT "\tAFTER adding end device: "
- "handle (0x%04x), sas_addr(0x%016llx)\n",
- ioc->name, handle, (unsigned long long)
- le64_to_cpu(sas_device_pg0.SASAddress));
- }
- }
-
- printk(MPT2SAS_INFO_FMT "\tscan devices: end devices complete\n",
- ioc->name);
-
- printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
-}
-
-
-/**
- * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
- * @ioc: per adapter object
- * @reset_phase: phase
- *
- * The handler for doing any required cleanup or initialization.
- *
- * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
- * MPT2_IOC_DONE_RESET
- *
- * Return nothing.
- */
-void
-mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
-{
- switch (reset_phase) {
- case MPT2_IOC_PRE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
- break;
- case MPT2_IOC_AFTER_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
- if (ioc->scsih_cmds.status & MPT2_CMD_PENDING) {
- ioc->scsih_cmds.status |= MPT2_CMD_RESET;
- mpt2sas_base_free_smid(ioc, ioc->scsih_cmds.smid);
- complete(&ioc->scsih_cmds.done);
- }
- if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
- ioc->tm_cmds.status |= MPT2_CMD_RESET;
- mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
- complete(&ioc->tm_cmds.done);
- }
- _scsih_fw_event_cleanup_queue(ioc);
- _scsih_flush_running_cmds(ioc);
- break;
- case MPT2_IOC_DONE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
- _scsih_sas_host_refresh(ioc);
- _scsih_prep_device_scan(ioc);
- _scsih_search_responding_sas_devices(ioc);
- _scsih_search_responding_raid_devices(ioc);
- _scsih_search_responding_expanders(ioc);
- if ((!ioc->is_driver_loading) && !(disable_discovery > 0 &&
- !ioc->sas_hba.num_phys)) {
- _scsih_prep_device_scan(ioc);
- _scsih_search_responding_sas_devices(ioc);
- _scsih_search_responding_raid_devices(ioc);
- _scsih_search_responding_expanders(ioc);
- _scsih_error_recovery_delete_devices(ioc);
- }
- break;
- }
-}
-
-/**
- * _firmware_event_work - delayed task for processing firmware events
- * @ioc: per adapter object
- * @work: equal to the fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_firmware_event_work(struct work_struct *work)
-{
- struct fw_event_work *fw_event = container_of(work,
- struct fw_event_work, delayed_work.work);
- struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
-
- _scsih_fw_event_del_from_list(ioc, fw_event);
-
- /* the queue is being flushed so ignore this event */
- if (ioc->remove_host || ioc->pci_error_recovery) {
- fw_event_work_put(fw_event);
- return;
- }
-
- switch (fw_event->event) {
- case MPT2SAS_REMOVE_UNRESPONDING_DEVICES:
- while (scsi_host_in_recovery(ioc->shost) ||
- ioc->shost_recovery) {
- /*
- * If we're unloading, bail. Otherwise, this can become
- * an infinite loop.
- */
- if (ioc->remove_host)
- goto out;
-
- ssleep(1);
- }
- _scsih_remove_unresponding_sas_devices(ioc);
- _scsih_scan_for_devices_after_reset(ioc);
- break;
- case MPT2SAS_PORT_ENABLE_COMPLETE:
- ioc->start_scan = 0;
-
- if (missing_delay[0] != -1 && missing_delay[1] != -1)
- mpt2sas_base_update_missing_delay(ioc, missing_delay[0],
- missing_delay[1]);
-
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
- "from worker thread\n", ioc->name));
- break;
- case MPT2SAS_TURN_ON_PFA_LED:
- _scsih_turn_on_pfa_led(ioc, fw_event->device_handle);
- break;
- case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
- _scsih_sas_topology_change_event(ioc, fw_event);
- break;
- case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
- _scsih_sas_device_status_change_event(ioc,
- fw_event);
- break;
- case MPI2_EVENT_SAS_DISCOVERY:
- _scsih_sas_discovery_event(ioc,
- fw_event);
- break;
- case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
- _scsih_sas_broadcast_primitive_event(ioc,
- fw_event);
- break;
- case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
- _scsih_sas_enclosure_dev_status_change_event(ioc,
- fw_event);
- break;
- case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
- _scsih_sas_ir_config_change_event(ioc, fw_event);
- break;
- case MPI2_EVENT_IR_VOLUME:
- _scsih_sas_ir_volume_event(ioc, fw_event);
- break;
- case MPI2_EVENT_IR_PHYSICAL_DISK:
- _scsih_sas_ir_physical_disk_event(ioc, fw_event);
- break;
- case MPI2_EVENT_IR_OPERATION_STATUS:
- _scsih_sas_ir_operation_status_event(ioc, fw_event);
- break;
- }
-out:
- fw_event_work_put(fw_event);
-}
-
-/**
- * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time)
- * @ioc: per adapter object
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt.
- *
- * This function merely adds a new work task into ioc->firmware_event_thread.
- * The tasks are worked from _firmware_event_work in user context.
- *
- * Returns void.
- */
-void
-mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
- u32 reply)
-{
- struct fw_event_work *fw_event;
- Mpi2EventNotificationReply_t *mpi_reply;
- u16 event;
- u16 sz;
-
- /* events turned off due to host reset or driver unloading */
- if (ioc->remove_host || ioc->pci_error_recovery)
- return;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-
- if (unlikely(!mpi_reply)) {
- printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- event = le16_to_cpu(mpi_reply->Event);
-
- switch (event) {
- /* handle these */
- case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
- {
- Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
- (Mpi2EventDataSasBroadcastPrimitive_t *)
- mpi_reply->EventData;
-
- if (baen_data->Primitive !=
- MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
- return;
-
- if (ioc->broadcast_aen_busy) {
- ioc->broadcast_aen_pending++;
- return;
- } else
- ioc->broadcast_aen_busy = 1;
- break;
- }
-
- case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
- _scsih_check_topo_delete_events(ioc,
- (Mpi2EventDataSasTopologyChangeList_t *)
- mpi_reply->EventData);
- break;
- case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
- _scsih_check_ir_config_unhide_events(ioc,
- (Mpi2EventDataIrConfigChangeList_t *)
- mpi_reply->EventData);
- break;
- case MPI2_EVENT_IR_VOLUME:
- _scsih_check_volume_delete_events(ioc,
- (Mpi2EventDataIrVolume_t *)
- mpi_reply->EventData);
- break;
- case MPI2_EVENT_LOG_ENTRY_ADDED:
- {
- Mpi2EventDataLogEntryAdded_t *log_entry;
- __le32 *log_code;
-
- if (!ioc->is_warpdrive)
- break;
-
- log_entry = (Mpi2EventDataLogEntryAdded_t *)
- mpi_reply->EventData;
- log_code = (__le32 *)log_entry->LogData;
-
- if (le16_to_cpu(log_entry->LogEntryQualifier)
- != MPT2_WARPDRIVE_LOGENTRY)
- break;
-
- switch (le32_to_cpu(*log_code)) {
- case MPT2_WARPDRIVE_LC_SSDT:
- printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
- "IO Throttling has occurred in the WarpDrive "
- "subsystem. Check WarpDrive documentation for "
- "additional details.\n", ioc->name);
- break;
- case MPT2_WARPDRIVE_LC_SSDLW:
- printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
- "Program/Erase Cycles for the WarpDrive subsystem "
- "in degraded range. Check WarpDrive documentation "
- "for additional details.\n", ioc->name);
- break;
- case MPT2_WARPDRIVE_LC_SSDLF:
- printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
- "There are no Program/Erase Cycles for the "
- "WarpDrive subsystem. The storage device will be "
- "in read-only mode. Check WarpDrive documentation "
- "for additional details.\n", ioc->name);
- break;
- case MPT2_WARPDRIVE_LC_BRMF:
- printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
- "The Backup Rail Monitor has failed on the "
- "WarpDrive subsystem. Check WarpDrive "
- "documentation for additional details.\n",
- ioc->name);
- break;
- }
-
- break;
- }
- case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
- case MPI2_EVENT_IR_OPERATION_STATUS:
- case MPI2_EVENT_SAS_DISCOVERY:
- case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
- case MPI2_EVENT_IR_PHYSICAL_DISK:
- break;
-
- case MPI2_EVENT_TEMP_THRESHOLD:
- _scsih_temp_threshold_events(ioc,
- (Mpi2EventDataTemperature_t *)
- mpi_reply->EventData);
- break;
-
- default: /* ignore the rest */
- return;
- }
-
- sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
- fw_event = alloc_fw_event_work(sz);
- if (!fw_event) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
- }
-
- memcpy(fw_event->event_data, mpi_reply->EventData, sz);
- fw_event->ioc = ioc;
- fw_event->VF_ID = mpi_reply->VF_ID;
- fw_event->VP_ID = mpi_reply->VP_ID;
- fw_event->event = event;
- _scsih_fw_event_add(ioc, fw_event);
- fw_event_work_put(fw_event);
- return;
-}
-
-/* shost template */
-static struct scsi_host_template scsih_driver_template = {
- .module = THIS_MODULE,
- .name = "Fusion MPT SAS Host",
- .proc_name = MPT2SAS_DRIVER_NAME,
- .queuecommand = _scsih_qcmd,
- .target_alloc = _scsih_target_alloc,
- .slave_alloc = _scsih_slave_alloc,
- .slave_configure = _scsih_slave_configure,
- .target_destroy = _scsih_target_destroy,
- .slave_destroy = _scsih_slave_destroy,
- .scan_finished = _scsih_scan_finished,
- .scan_start = _scsih_scan_start,
- .change_queue_depth = _scsih_change_queue_depth,
- .eh_abort_handler = _scsih_abort,
- .eh_device_reset_handler = _scsih_dev_reset,
- .eh_target_reset_handler = _scsih_target_reset,
- .eh_host_reset_handler = _scsih_host_reset,
- .bios_param = _scsih_bios_param,
- .can_queue = 1,
- .this_id = -1,
- .sg_tablesize = MPT2SAS_SG_DEPTH,
- .max_sectors = 32767,
- .cmd_per_lun = 7,
- .use_clustering = ENABLE_CLUSTERING,
- .shost_attrs = mpt2sas_host_attrs,
- .sdev_attrs = mpt2sas_dev_attrs,
- .track_queue_depth = 1,
-};
-
-/**
- * _scsih_expander_node_remove - removing expander device from list.
- * @ioc: per adapter object
- * @sas_expander: the sas_device object
- * Context: Calling function should acquire ioc->sas_node_lock.
- *
- * Removing object and freeing associated memory from the
- * ioc->sas_expander_list.
- *
- * Return nothing.
- */
-static void
-_scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_node *sas_expander)
-{
- struct _sas_port *mpt2sas_port, *next;
-
- /* remove sibling ports attached to this expander */
- list_for_each_entry_safe(mpt2sas_port, next,
- &sas_expander->sas_port_list, port_list) {
- if (ioc->shost_recovery)
- return;
- if (mpt2sas_port->remote_identify.device_type ==
- SAS_END_DEVICE)
- mpt2sas_device_remove_by_sas_address(ioc,
- mpt2sas_port->remote_identify.sas_address);
- else if (mpt2sas_port->remote_identify.device_type ==
- SAS_EDGE_EXPANDER_DEVICE ||
- mpt2sas_port->remote_identify.device_type ==
- SAS_FANOUT_EXPANDER_DEVICE)
- mpt2sas_expander_remove(ioc,
- mpt2sas_port->remote_identify.sas_address);
- }
-
- mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
- sas_expander->sas_address_parent);
-
- printk(MPT2SAS_INFO_FMT "expander_remove: handle"
- "(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
- sas_expander->handle, (unsigned long long)
- sas_expander->sas_address);
-
- kfree(sas_expander->phy);
- kfree(sas_expander);
-}
-
-/**
- * _scsih_ir_shutdown - IR shutdown notification
- * @ioc: per adapter object
- *
- * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
- * the host system is shutting down.
- *
- * Return nothing.
- */
-static void
-_scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc)
-{
- Mpi2RaidActionRequest_t *mpi_request;
- Mpi2RaidActionReply_t *mpi_reply;
- u16 smid;
-
- /* is IR firmware build loaded ? */
- if (!ioc->ir_firmware)
- return;
-
- mutex_lock(&ioc->scsih_cmds.mutex);
-
- if (ioc->scsih_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: scsih_cmd in use\n",
- ioc->name, __func__);
- goto out;
- }
- ioc->scsih_cmds.status = MPT2_CMD_PENDING;
-
- smid = mpt2sas_base_get_smid(ioc, ioc->scsih_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
- goto out;
- }
-
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->scsih_cmds.smid = smid;
- memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
-
- mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
- mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
-
- if (!ioc->hide_ir_msg)
- printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
- init_completion(&ioc->scsih_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
-
- if (!(ioc->scsih_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- goto out;
- }
-
- if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) {
- mpi_reply = ioc->scsih_cmds.reply;
-
- if (!ioc->hide_ir_msg)
- printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
- "ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo));
- }
-
- out:
- ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
- mutex_unlock(&ioc->scsih_cmds.mutex);
-}
-
-/**
- * _scsih_shutdown - routine call during system shutdown
- * @pdev: PCI device struct
- *
- * Return nothing.
- */
-static void
-_scsih_shutdown(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- struct workqueue_struct *wq;
- unsigned long flags;
-
- ioc->remove_host = 1;
- _scsih_fw_event_cleanup_queue(ioc);
-
- spin_lock_irqsave(&ioc->fw_event_lock, flags);
- wq = ioc->firmware_event_thread;
- ioc->firmware_event_thread = NULL;
- spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
- if (wq)
- destroy_workqueue(wq);
-
- _scsih_ir_shutdown(ioc);
- mpt2sas_base_detach(ioc);
-}
-
-/**
- * _scsih_remove - detach and remove add host
- * @pdev: PCI device struct
- *
- * Routine called when unloading the driver.
- * Return nothing.
- */
-static void
-_scsih_remove(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- struct _sas_port *mpt2sas_port, *next_port;
- struct _raid_device *raid_device, *next;
- struct MPT2SAS_TARGET *sas_target_priv_data;
- struct workqueue_struct *wq;
- unsigned long flags;
-
- ioc->remove_host = 1;
- _scsih_fw_event_cleanup_queue(ioc);
-
- spin_lock_irqsave(&ioc->fw_event_lock, flags);
- wq = ioc->firmware_event_thread;
- ioc->firmware_event_thread = NULL;
- spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
- if (wq)
- destroy_workqueue(wq);
-
- /* release all the volumes */
- _scsih_ir_shutdown(ioc);
- list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
- list) {
- if (raid_device->starget) {
- sas_target_priv_data =
- raid_device->starget->hostdata;
- sas_target_priv_data->deleted = 1;
- scsi_remove_target(&raid_device->starget->dev);
- }
- printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
- "(0x%016llx)\n", ioc->name, raid_device->handle,
- (unsigned long long) raid_device->wwid);
- _scsih_raid_device_remove(ioc, raid_device);
- }
-
- /* free ports attached to the sas_host */
- list_for_each_entry_safe(mpt2sas_port, next_port,
- &ioc->sas_hba.sas_port_list, port_list) {
- if (mpt2sas_port->remote_identify.device_type ==
- SAS_END_DEVICE)
- mpt2sas_device_remove_by_sas_address(ioc,
- mpt2sas_port->remote_identify.sas_address);
- else if (mpt2sas_port->remote_identify.device_type ==
- SAS_EDGE_EXPANDER_DEVICE ||
- mpt2sas_port->remote_identify.device_type ==
- SAS_FANOUT_EXPANDER_DEVICE)
- mpt2sas_expander_remove(ioc,
- mpt2sas_port->remote_identify.sas_address);
- }
-
- /* free phys attached to the sas_host */
- if (ioc->sas_hba.num_phys) {
- kfree(ioc->sas_hba.phy);
- ioc->sas_hba.phy = NULL;
- ioc->sas_hba.num_phys = 0;
- }
-
- sas_remove_host(shost);
- scsi_remove_host(shost);
- mpt2sas_base_detach(ioc);
- spin_lock(&gioc_lock);
- list_del(&ioc->list);
- spin_unlock(&gioc_lock);
- scsi_host_put(shost);
-}
-
-/**
- * _scsih_probe_boot_devices - reports 1st device
- * @ioc: per adapter object
- *
- * If specified in bios page 2, this routine reports the 1st
- * device scsi-ml or sas transport for persistent boot device
- * purposes. Please refer to function _scsih_determine_boot_device()
- */
-static void
-_scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
-{
- u8 is_raid;
- void *device;
- struct _sas_device *sas_device;
- struct _raid_device *raid_device;
- u16 handle;
- u64 sas_address_parent;
- u64 sas_address;
- unsigned long flags;
- int rc;
-
- /* no Bios, return immediately */
- if (!ioc->bios_pg3.BiosVersion)
- return;
-
- device = NULL;
- is_raid = 0;
- if (ioc->req_boot_device.device) {
- device = ioc->req_boot_device.device;
- is_raid = ioc->req_boot_device.is_raid;
- } else if (ioc->req_alt_boot_device.device) {
- device = ioc->req_alt_boot_device.device;
- is_raid = ioc->req_alt_boot_device.is_raid;
- } else if (ioc->current_boot_device.device) {
- device = ioc->current_boot_device.device;
- is_raid = ioc->current_boot_device.is_raid;
- }
-
- if (!device)
- return;
-
- if (is_raid) {
- raid_device = device;
- rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
- raid_device->id, 0);
- if (rc)
- _scsih_raid_device_remove(ioc, raid_device);
- } else {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = device;
- handle = sas_device->handle;
- sas_address_parent = sas_device->sas_address_parent;
- sas_address = sas_device->sas_address;
- list_move_tail(&sas_device->list, &ioc->sas_device_list);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- if (ioc->hide_drives)
- return;
- if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->sas_address_parent)) {
- _scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- if (!ioc->is_driver_loading) {
- mpt2sas_transport_port_remove(ioc,
- sas_address,
- sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
- }
- }
- }
-}
-
-/**
- * _scsih_probe_raid - reporting raid volumes to scsi-ml
- * @ioc: per adapter object
- *
- * Called during initial loading of the driver.
- */
-static void
-_scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc)
-{
- struct _raid_device *raid_device, *raid_next;
- int rc;
-
- list_for_each_entry_safe(raid_device, raid_next,
- &ioc->raid_device_list, list) {
- if (raid_device->starget)
- continue;
- rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
- raid_device->id, 0);
- if (rc)
- _scsih_raid_device_remove(ioc, raid_device);
- }
-}
-
-static struct _sas_device *get_next_sas_device(struct MPT2SAS_ADAPTER *ioc)
-{
- struct _sas_device *sas_device = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- if (!list_empty(&ioc->sas_device_init_list)) {
- sas_device = list_first_entry(&ioc->sas_device_init_list,
- struct _sas_device, list);
- sas_device_get(sas_device);
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- return sas_device;
-}
-
-static void sas_device_make_active(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_device *sas_device)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
-
- /*
- * Since we dropped the lock during the call to port_add(), we need to
- * be careful here that somebody else didn't move or delete this item
- * while we were busy with other things.
- *
- * If it was on the list, we need a put() for the reference the list
- * had. Either way, we need a get() for the destination list.
- */
- if (!list_empty(&sas_device->list)) {
- list_del_init(&sas_device->list);
- sas_device_put(sas_device);
- }
-
- sas_device_get(sas_device);
- list_add_tail(&sas_device->list, &ioc->sas_device_list);
-
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-}
-
-/**
- * _scsih_probe_sas - reporting sas devices to sas transport
- * @ioc: per adapter object
- *
- * Called during initial loading of the driver.
- */
-static void
-_scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
-{
- struct _sas_device *sas_device;
-
- if (ioc->hide_drives)
- return;
-
- while ((sas_device = get_next_sas_device(ioc))) {
- if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->sas_address_parent)) {
- _scsih_sas_device_remove(ioc, sas_device);
- sas_device_put(sas_device);
- continue;
- } else if (!sas_device->starget) {
- if (!ioc->is_driver_loading) {
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
- sas_device_put(sas_device);
- continue;
- }
- }
-
- sas_device_make_active(ioc, sas_device);
- sas_device_put(sas_device);
- }
-}
-
-/**
- * _scsih_probe_devices - probing for devices
- * @ioc: per adapter object
- *
- * Called during initial loading of the driver.
- */
-static void
-_scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
-{
- u16 volume_mapping_flags;
-
- if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
- return; /* return when IOC doesn't support initiator mode */
-
- _scsih_probe_boot_devices(ioc);
-
- if (ioc->ir_firmware) {
- volume_mapping_flags =
- le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
- MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
- if (volume_mapping_flags ==
- MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
- _scsih_probe_raid(ioc);
- _scsih_probe_sas(ioc);
- } else {
- _scsih_probe_sas(ioc);
- _scsih_probe_raid(ioc);
- }
- } else
- _scsih_probe_sas(ioc);
-}
-
-
-/**
- * _scsih_scan_start - scsi lld callback for .scan_start
- * @shost: SCSI host pointer
- *
- * The shost has the ability to discover targets on its own instead
- * of scanning the entire bus. In our implemention, we will kick off
- * firmware discovery.
- */
-static void
-_scsih_scan_start(struct Scsi_Host *shost)
-{
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- int rc;
-
- if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
- mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
-
- if (disable_discovery > 0)
- return;
-
- ioc->start_scan = 1;
- rc = mpt2sas_port_enable(ioc);
-
- if (rc != 0)
- printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name);
-}
-
-/**
- * _scsih_scan_finished - scsi lld callback for .scan_finished
- * @shost: SCSI host pointer
- * @time: elapsed time of the scan in jiffies
- *
- * This function will be called periodically until it returns 1 with the
- * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
- * we wait for firmware discovery to complete, then return 1.
- */
-static int
-_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
-{
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- if (disable_discovery > 0) {
- ioc->is_driver_loading = 0;
- ioc->wait_for_discovery_to_complete = 0;
- return 1;
- }
-
- if (time >= (300 * HZ)) {
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout "
- "(timeout=300s)\n", ioc->name);
- ioc->is_driver_loading = 0;
- return 1;
- }
-
- if (ioc->start_scan)
- return 0;
-
- if (ioc->start_scan_failed) {
- printk(MPT2SAS_INFO_FMT "port enable: FAILED with "
- "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed);
- ioc->is_driver_loading = 0;
- ioc->wait_for_discovery_to_complete = 0;
- ioc->remove_host = 1;
- return 1;
- }
-
- printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name);
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-
- if (ioc->wait_for_discovery_to_complete) {
- ioc->wait_for_discovery_to_complete = 0;
- _scsih_probe_devices(ioc);
- }
- mpt2sas_base_start_watchdog(ioc);
- ioc->is_driver_loading = 0;
- return 1;
-}
-
-
-/**
- * _scsih_probe - attach and add scsi host
- * @pdev: PCI device struct
- * @id: pci device id
- *
- * Returns 0 success, anything else error.
- */
-static int
-_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct MPT2SAS_ADAPTER *ioc;
- struct Scsi_Host *shost;
- int rv;
-
- shost = scsi_host_alloc(&scsih_driver_template,
- sizeof(struct MPT2SAS_ADAPTER));
- if (!shost)
- return -ENODEV;
-
- /* init local params */
- ioc = shost_priv(shost);
- memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER));
- INIT_LIST_HEAD(&ioc->list);
- spin_lock(&gioc_lock);
- list_add_tail(&ioc->list, &mpt2sas_ioc_list);
- spin_unlock(&gioc_lock);
- ioc->shost = shost;
- ioc->id = mpt_ids++;
- sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id);
- ioc->pdev = pdev;
- if (id->device == MPI2_MFGPAGE_DEVID_SSS6200) {
- ioc->is_warpdrive = 1;
- ioc->hide_ir_msg = 1;
- } else
- ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
- ioc->scsi_io_cb_idx = scsi_io_cb_idx;
- ioc->tm_cb_idx = tm_cb_idx;
- ioc->ctl_cb_idx = ctl_cb_idx;
- ioc->base_cb_idx = base_cb_idx;
- ioc->port_enable_cb_idx = port_enable_cb_idx;
- ioc->transport_cb_idx = transport_cb_idx;
- ioc->scsih_cb_idx = scsih_cb_idx;
- ioc->config_cb_idx = config_cb_idx;
- ioc->tm_tr_cb_idx = tm_tr_cb_idx;
- ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx;
- ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
- ioc->logging_level = logging_level;
- ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
- /* misc semaphores and spin locks */
- mutex_init(&ioc->reset_in_progress_mutex);
- /* initializing pci_access_mutex lock */
- mutex_init(&ioc->pci_access_mutex);
- spin_lock_init(&ioc->ioc_reset_in_progress_lock);
- spin_lock_init(&ioc->scsi_lookup_lock);
- spin_lock_init(&ioc->sas_device_lock);
- spin_lock_init(&ioc->sas_node_lock);
- spin_lock_init(&ioc->fw_event_lock);
- spin_lock_init(&ioc->raid_device_lock);
-
- INIT_LIST_HEAD(&ioc->sas_device_list);
- INIT_LIST_HEAD(&ioc->sas_device_init_list);
- INIT_LIST_HEAD(&ioc->sas_expander_list);
- INIT_LIST_HEAD(&ioc->fw_event_list);
- INIT_LIST_HEAD(&ioc->raid_device_list);
- INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
- INIT_LIST_HEAD(&ioc->delayed_tr_list);
- INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
- INIT_LIST_HEAD(&ioc->reply_queue_list);
-
- /* init shost parameters */
- shost->max_cmd_len = 32;
- shost->max_lun = max_lun;
- shost->transportt = mpt2sas_transport_template;
- shost->unique_id = ioc->id;
-
- if (max_sectors != 0xFFFF) {
- if (max_sectors < 64) {
- shost->max_sectors = 64;
- printk(MPT2SAS_WARN_FMT "Invalid value %d passed "
- "for max_sectors, range is 64 to 32767. Assigning "
- "value of 64.\n", ioc->name, max_sectors);
- } else if (max_sectors > 32767) {
- shost->max_sectors = 32767;
- printk(MPT2SAS_WARN_FMT "Invalid value %d passed "
- "for max_sectors, range is 64 to 8192. Assigning "
- "default value of 32767.\n", ioc->name,
- max_sectors);
- } else {
- shost->max_sectors = max_sectors & 0xFFFE;
- printk(MPT2SAS_INFO_FMT "The max_sectors value is "
- "set to %d\n", ioc->name, shost->max_sectors);
- }
- }
-
- /* register EEDP capabilities with SCSI layer */
- if (prot_mask)
- scsi_host_set_prot(shost, prot_mask);
- else
- scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
- | SHOST_DIF_TYPE2_PROTECTION
- | SHOST_DIF_TYPE3_PROTECTION);
-
- scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
-
- /* event thread */
- snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
- "fw_event%d", ioc->id);
- ioc->firmware_event_thread = create_singlethread_workqueue(
- ioc->firmware_event_name);
- if (!ioc->firmware_event_thread) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rv = -ENODEV;
- goto out_thread_fail;
- }
-
- ioc->is_driver_loading = 1;
- if ((mpt2sas_base_attach(ioc))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rv = -ENODEV;
- goto out_attach_fail;
- }
-
- if (ioc->is_warpdrive) {
- if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS)
- ioc->hide_drives = 0;
- else if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_HIDE_ALL_DISKS)
- ioc->hide_drives = 1;
- else {
- if (_scsih_get_num_volumes(ioc))
- ioc->hide_drives = 1;
- else
- ioc->hide_drives = 0;
- }
- } else
- ioc->hide_drives = 0;
-
- rv = scsi_add_host(shost, &pdev->dev);
- if (rv) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out_add_shost_fail;
- }
-
- scsi_scan_host(shost);
-
- return 0;
-
- out_add_shost_fail:
- mpt2sas_base_detach(ioc);
- out_attach_fail:
- destroy_workqueue(ioc->firmware_event_thread);
- out_thread_fail:
- spin_lock(&gioc_lock);
- list_del(&ioc->list);
- spin_unlock(&gioc_lock);
- scsi_host_put(shost);
- return rv;
-}
-
-#ifdef CONFIG_PM
-/**
- * _scsih_suspend - power management suspend main entry point
- * @pdev: PCI device struct
- * @state: PM state change to (usually PCI_D3)
- *
- * Returns 0 success, anything else error.
- */
-static int
-_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- pci_power_t device_state;
-
- mpt2sas_base_stop_watchdog(ioc);
- scsi_block_requests(shost);
- _scsih_ir_shutdown(ioc);
- device_state = pci_choose_state(pdev, state);
- printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering "
- "operating state [D%d]\n", ioc->name, pdev,
- pci_name(pdev), device_state);
-
- mpt2sas_base_free_resources(ioc);
- pci_save_state(pdev);
- pci_set_power_state(pdev, device_state);
- return 0;
-}
-
-/**
- * _scsih_resume - power management resume main entry point
- * @pdev: PCI device struct
- *
- * Returns 0 success, anything else error.
- */
-static int
-_scsih_resume(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- pci_power_t device_state = pdev->current_state;
- int r;
-
- printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous "
- "operating state [D%d]\n", ioc->name, pdev,
- pci_name(pdev), device_state);
-
- pci_set_power_state(pdev, PCI_D0);
- pci_enable_wake(pdev, PCI_D0, 0);
- pci_restore_state(pdev);
- ioc->pdev = pdev;
- r = mpt2sas_base_map_resources(ioc);
- if (r)
- return r;
-
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
- scsi_unblock_requests(shost);
- mpt2sas_base_start_watchdog(ioc);
- return 0;
-}
-#endif /* CONFIG_PM */
-
-/**
- * _scsih_pci_error_detected - Called when a PCI error is detected.
- * @pdev: PCI device struct
- * @state: PCI channel state
- *
- * Description: Called when a PCI error is detected.
- *
- * Return value:
- * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
- */
-static pci_ers_result_t
-_scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n",
- ioc->name, state);
-
- switch (state) {
- case pci_channel_io_normal:
- return PCI_ERS_RESULT_CAN_RECOVER;
- case pci_channel_io_frozen:
- /* Fatal error, prepare for slot reset */
- ioc->pci_error_recovery = 1;
- scsi_block_requests(ioc->shost);
- mpt2sas_base_stop_watchdog(ioc);
- mpt2sas_base_free_resources(ioc);
- return PCI_ERS_RESULT_NEED_RESET;
- case pci_channel_io_perm_failure:
- /* Permanent error, prepare for device removal */
- ioc->pci_error_recovery = 1;
- mpt2sas_base_stop_watchdog(ioc);
- _scsih_flush_running_cmds(ioc);
- return PCI_ERS_RESULT_DISCONNECT;
- }
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * _scsih_pci_slot_reset - Called when PCI slot has been reset.
- * @pdev: PCI device struct
- *
- * Description: This routine is called by the pci error recovery
- * code after the PCI slot has been reset, just before we
- * should resume normal operations.
- */
-static pci_ers_result_t
-_scsih_pci_slot_reset(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- int rc;
-
- printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n",
- ioc->name);
-
- ioc->pci_error_recovery = 0;
- ioc->pdev = pdev;
- pci_restore_state(pdev);
- rc = mpt2sas_base_map_resources(ioc);
- if (rc)
- return PCI_ERS_RESULT_DISCONNECT;
-
-
- rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
-
- printk(MPT2SAS_WARN_FMT "hard reset: %s\n", ioc->name,
- (rc == 0) ? "success" : "failed");
-
- if (!rc)
- return PCI_ERS_RESULT_RECOVERED;
- else
- return PCI_ERS_RESULT_DISCONNECT;
-}
-
-/**
- * _scsih_pci_resume() - resume normal ops after PCI reset
- * @pdev: pointer to PCI device
- *
- * Called when the error recovery driver tells us that its
- * OK to resume normal operation. Use completion to allow
- * halted scsi ops to resume.
- */
-static void
-_scsih_pci_resume(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name);
-
- pci_cleanup_aer_uncorrect_error_status(pdev);
- mpt2sas_base_start_watchdog(ioc);
- scsi_unblock_requests(ioc->shost);
-}
-
-/**
- * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
- * @pdev: pointer to PCI device
- */
-static pci_ers_result_t
-_scsih_pci_mmio_enabled(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
- printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n",
- ioc->name);
-
- /* TODO - dump whatever for debugging purposes */
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-static const struct pci_error_handlers _scsih_err_handler = {
- .error_detected = _scsih_pci_error_detected,
- .mmio_enabled = _scsih_pci_mmio_enabled,
- .slot_reset = _scsih_pci_slot_reset,
- .resume = _scsih_pci_resume,
-};
-
-static struct pci_driver scsih_driver = {
- .name = MPT2SAS_DRIVER_NAME,
- .id_table = scsih_pci_table,
- .probe = _scsih_probe,
- .remove = _scsih_remove,
- .shutdown = _scsih_shutdown,
- .err_handler = &_scsih_err_handler,
-#ifdef CONFIG_PM
- .suspend = _scsih_suspend,
- .resume = _scsih_resume,
-#endif
-};
-
-/* raid transport support */
-static struct raid_function_template mpt2sas_raid_functions = {
- .cookie = &scsih_driver_template,
- .is_raid = _scsih_is_raid,
- .get_resync = _scsih_get_resync,
- .get_state = _scsih_get_state,
-};
-
-/**
- * _scsih_init - main entry point for this driver.
- *
- * Returns 0 success, anything else error.
- */
-static int __init
-_scsih_init(void)
-{
- int error;
-
- mpt_ids = 0;
- printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME,
- MPT2SAS_DRIVER_VERSION);
-
- mpt2sas_transport_template =
- sas_attach_transport(&mpt2sas_transport_functions);
- if (!mpt2sas_transport_template)
- return -ENODEV;
- /* raid transport support */
- mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions);
- if (!mpt2sas_raid_template) {
- sas_release_transport(mpt2sas_transport_template);
- return -ENODEV;
- }
-
- mpt2sas_base_initialize_callback_handler();
-
- /* queuecommand callback hander */
- scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
-
- /* task management callback handler */
- tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
-
- /* base internal commands callback handler */
- base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
- port_enable_cb_idx = mpt2sas_base_register_callback_handler(
- mpt2sas_port_enable_done);
-
- /* transport internal commands callback handler */
- transport_cb_idx = mpt2sas_base_register_callback_handler(
- mpt2sas_transport_done);
-
- /* scsih internal commands callback handler */
- scsih_cb_idx = mpt2sas_base_register_callback_handler(_scsih_done);
-
- /* configuration page API internal commands callback handler */
- config_cb_idx = mpt2sas_base_register_callback_handler(
- mpt2sas_config_done);
-
- /* ctl module callback handler */
- ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done);
-
- tm_tr_cb_idx = mpt2sas_base_register_callback_handler(
- _scsih_tm_tr_complete);
-
- tm_tr_volume_cb_idx = mpt2sas_base_register_callback_handler(
- _scsih_tm_volume_tr_complete);
-
- tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler(
- _scsih_sas_control_complete);
-
- mpt2sas_ctl_init();
-
- error = pci_register_driver(&scsih_driver);
- if (error) {
- /* raid transport support */
- raid_class_release(mpt2sas_raid_template);
- sas_release_transport(mpt2sas_transport_template);
- }
-
- return error;
-}
-
-/**
- * _scsih_exit - exit point for this driver (when it is a module).
- *
- * Returns 0 success, anything else error.
- */
-static void __exit
-_scsih_exit(void)
-{
- printk(KERN_INFO "mpt2sas version %s unloading\n",
- MPT2SAS_DRIVER_VERSION);
-
- pci_unregister_driver(&scsih_driver);
-
- mpt2sas_ctl_exit();
-
- mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
- mpt2sas_base_release_callback_handler(tm_cb_idx);
- mpt2sas_base_release_callback_handler(base_cb_idx);
- mpt2sas_base_release_callback_handler(port_enable_cb_idx);
- mpt2sas_base_release_callback_handler(transport_cb_idx);
- mpt2sas_base_release_callback_handler(scsih_cb_idx);
- mpt2sas_base_release_callback_handler(config_cb_idx);
- mpt2sas_base_release_callback_handler(ctl_cb_idx);
-
- mpt2sas_base_release_callback_handler(tm_tr_cb_idx);
- mpt2sas_base_release_callback_handler(tm_tr_volume_cb_idx);
- mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx);
-
- /* raid transport support */
- raid_class_release(mpt2sas_raid_template);
- sas_release_transport(mpt2sas_transport_template);
-
-}
-
-module_init(_scsih_init);
-module_exit(_scsih_exit);
+++ /dev/null
-/*
- * SAS Transport Layer for MPT (Message Passing Technology) based controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_transport_sas.h>
-#include <scsi/scsi_dbg.h>
-
-#include "mpt2sas_base.h"
-/**
- * _transport_sas_node_find_by_sas_address - sas node search
- * @ioc: per adapter object
- * @sas_address: sas address of expander or sas host
- * Context: Calling function should acquire ioc->sas_node_lock.
- *
- * Search for either hba phys or expander device based on handle, then returns
- * the sas_node object.
- */
-static struct _sas_node *
-_transport_sas_node_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address)
-{
- if (ioc->sas_hba.sas_address == sas_address)
- return &ioc->sas_hba;
- else
- return mpt2sas_scsih_expander_find_by_sas_address(ioc,
- sas_address);
-}
-
-/**
- * _transport_convert_phy_link_rate -
- * @link_rate: link rate returned from mpt firmware
- *
- * Convert link_rate from mpi fusion into sas_transport form.
- */
-static enum sas_linkrate
-_transport_convert_phy_link_rate(u8 link_rate)
-{
- enum sas_linkrate rc;
-
- switch (link_rate) {
- case MPI2_SAS_NEG_LINK_RATE_1_5:
- rc = SAS_LINK_RATE_1_5_GBPS;
- break;
- case MPI2_SAS_NEG_LINK_RATE_3_0:
- rc = SAS_LINK_RATE_3_0_GBPS;
- break;
- case MPI2_SAS_NEG_LINK_RATE_6_0:
- rc = SAS_LINK_RATE_6_0_GBPS;
- break;
- case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED:
- rc = SAS_PHY_DISABLED;
- break;
- case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED:
- rc = SAS_LINK_RATE_FAILED;
- break;
- case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR:
- rc = SAS_SATA_PORT_SELECTOR;
- break;
- case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS:
- rc = SAS_PHY_RESET_IN_PROGRESS;
- break;
- default:
- case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE:
- case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE:
- rc = SAS_LINK_RATE_UNKNOWN;
- break;
- }
- return rc;
-}
-
-/**
- * _transport_set_identify - set identify for phys and end devices
- * @ioc: per adapter object
- * @handle: device handle
- * @identify: sas identify info
- *
- * Populates sas identify info.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle,
- struct sas_identify *identify)
-{
- Mpi2SasDevicePage0_t sas_device_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u32 device_info;
- u32 ioc_status;
-
- if (ioc->shost_recovery || ioc->pci_error_recovery) {
- printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
- __func__, ioc->name);
- return -EFAULT;
- }
-
- if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-
- ioc->name, __FILE__, __LINE__, __func__);
- return -ENXIO;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
- "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
- __FILE__, __LINE__, __func__);
- return -EIO;
- }
-
- memset(identify, 0, sizeof(struct sas_identify));
- device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
-
- /* sas_address */
- identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-
- /* phy number of the parent device this device is linked to */
- identify->phy_identifier = sas_device_pg0.PhyNum;
-
- /* device_type */
- switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
- case MPI2_SAS_DEVICE_INFO_NO_DEVICE:
- identify->device_type = SAS_PHY_UNUSED;
- break;
- case MPI2_SAS_DEVICE_INFO_END_DEVICE:
- identify->device_type = SAS_END_DEVICE;
- break;
- case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER:
- identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
- break;
- case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER:
- identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
- break;
- }
-
- /* initiator_port_protocols */
- if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR)
- identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
- if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR)
- identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
- if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR)
- identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
- if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST)
- identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
-
- /* target_port_protocols */
- if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET)
- identify->target_port_protocols |= SAS_PROTOCOL_SSP;
- if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
- identify->target_port_protocols |= SAS_PROTOCOL_STP;
- if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET)
- identify->target_port_protocols |= SAS_PROTOCOL_SMP;
- if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
- identify->target_port_protocols |= SAS_PROTOCOL_SATA;
-
- return 0;
-}
-
-/**
- * mpt2sas_transport_done - internal transport layer callback handler.
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Callback handler when sending internal generated transport cmds.
- * The callback index passed is `ioc->transport_cb_idx`
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
- */
-u8
-mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply)
-{
- MPI2DefaultReply_t *mpi_reply;
-
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- if (ioc->transport_cmds.status == MPT2_CMD_NOT_USED)
- return 1;
- if (ioc->transport_cmds.smid != smid)
- return 1;
- ioc->transport_cmds.status |= MPT2_CMD_COMPLETE;
- if (mpi_reply) {
- memcpy(ioc->transport_cmds.reply, mpi_reply,
- mpi_reply->MsgLength*4);
- ioc->transport_cmds.status |= MPT2_CMD_REPLY_VALID;
- }
- ioc->transport_cmds.status &= ~MPT2_CMD_PENDING;
- complete(&ioc->transport_cmds.done);
- return 1;
-}
-
-/* report manufacture request structure */
-struct rep_manu_request{
- u8 smp_frame_type;
- u8 function;
- u8 reserved;
- u8 request_length;
-};
-
-/* report manufacture reply structure */
-struct rep_manu_reply{
- u8 smp_frame_type; /* 0x41 */
- u8 function; /* 0x01 */
- u8 function_result;
- u8 response_length;
- u16 expander_change_count;
- u8 reserved0[2];
- u8 sas_format;
- u8 reserved2[3];
- u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN];
- u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN];
- u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN];
- u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN];
- u16 component_id;
- u8 component_revision_id;
- u8 reserved3;
- u8 vendor_specific[8];
-};
-
-/**
- * _transport_expander_report_manufacture - obtain SMP report_manufacture
- * @ioc: per adapter object
- * @sas_address: expander sas address
- * @edev: the sas_expander_device object
- *
- * Fills in the sas_expander_device object when SMP port is created.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address, struct sas_expander_device *edev)
-{
- Mpi2SmpPassthroughRequest_t *mpi_request;
- Mpi2SmpPassthroughReply_t *mpi_reply;
- struct rep_manu_reply *manufacture_reply;
- struct rep_manu_request *manufacture_request;
- int rc;
- u16 smid;
- u32 ioc_state;
- unsigned long timeleft;
- void *psge;
- u32 sgl_flags;
- u8 issue_reset = 0;
- void *data_out = NULL;
- dma_addr_t data_out_dma;
- u32 sz;
- u16 wait_state_count;
-
- if (ioc->shost_recovery || ioc->pci_error_recovery) {
- printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
- __func__, ioc->name);
- return -EFAULT;
- }
-
- mutex_lock(&ioc->transport_cmds.mutex);
-
- if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
- ioc->transport_cmds.status = MPT2_CMD_PENDING;
-
- wait_state_count = 0;
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- if (wait_state_count++ == 10) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed due to ioc not operational\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto out;
- }
- ssleep(1);
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- printk(MPT2SAS_INFO_FMT "%s: waiting for "
- "operational state(count=%d)\n", ioc->name,
- __func__, wait_state_count);
- }
- if (wait_state_count)
- printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
- ioc->name, __func__);
-
- smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- rc = 0;
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->transport_cmds.smid = smid;
-
- sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply);
- data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
-
- if (!data_out) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- rc = -ENOMEM;
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
-
- manufacture_request = data_out;
- manufacture_request->smp_frame_type = 0x40;
- manufacture_request->function = 1;
- manufacture_request->reserved = 0;
- manufacture_request->request_length = 0;
-
- memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
- mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
- mpi_request->PhysicalPort = 0xFF;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
- mpi_request->SASAddress = cpu_to_le64(sas_address);
- mpi_request->RequestDataLength =
- cpu_to_le16(sizeof(struct rep_manu_request));
- psge = &mpi_request->SGL;
-
- /* WRITE sgel first */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- sizeof(struct rep_manu_request), data_out_dma);
-
- /* incr sgel */
- psge += ioc->sge_size;
-
- /* READ sgel last */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
- MPI2_SGE_FLAGS_END_OF_LIST);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- sizeof(struct rep_manu_reply), data_out_dma +
- sizeof(struct rep_manu_request));
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "report_manufacture - "
- "send to sas_addr(0x%016llx)\n", ioc->name,
- (unsigned long long)sas_address));
- init_completion(&ioc->transport_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
- 10*HZ);
-
- if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2SmpPassthroughRequest_t)/4);
- if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
- }
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "report_manufacture - "
- "complete\n", ioc->name));
-
- if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
- u8 *tmp;
-
- mpi_reply = ioc->transport_cmds.reply;
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "report_manufacture - reply data transfer size(%d)\n",
- ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
-
- if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
- sizeof(struct rep_manu_reply))
- goto out;
-
- manufacture_reply = data_out + sizeof(struct rep_manu_request);
- strncpy(edev->vendor_id, manufacture_reply->vendor_id,
- SAS_EXPANDER_VENDOR_ID_LEN);
- strncpy(edev->product_id, manufacture_reply->product_id,
- SAS_EXPANDER_PRODUCT_ID_LEN);
- strncpy(edev->product_rev, manufacture_reply->product_rev,
- SAS_EXPANDER_PRODUCT_REV_LEN);
- edev->level = manufacture_reply->sas_format & 1;
- if (edev->level) {
- strncpy(edev->component_vendor_id,
- manufacture_reply->component_vendor_id,
- SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
- tmp = (u8 *)&manufacture_reply->component_id;
- edev->component_id = tmp[0] << 8 | tmp[1];
- edev->component_revision_id =
- manufacture_reply->component_revision_id;
- }
- } else
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "report_manufacture - no reply\n", ioc->name));
-
- issue_host_reset:
- if (issue_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- out:
- ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
- if (data_out)
- pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
-
- mutex_unlock(&ioc->transport_cmds.mutex);
- return rc;
-}
-
-/**
- * _transport_delete_port - helper function to removing a port
- * @ioc: per adapter object
- * @mpt2sas_port: mpt2sas per port object
- *
- * Returns nothing.
- */
-static void
-_transport_delete_port(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_port *mpt2sas_port)
-{
- u64 sas_address = mpt2sas_port->remote_identify.sas_address;
- enum sas_device_type device_type =
- mpt2sas_port->remote_identify.device_type;
-
- dev_printk(KERN_INFO, &mpt2sas_port->port->dev,
- "remove: sas_addr(0x%016llx)\n",
- (unsigned long long) sas_address);
-
- ioc->logging_level |= MPT_DEBUG_TRANSPORT;
- if (device_type == SAS_END_DEVICE)
- mpt2sas_device_remove_by_sas_address(ioc, sas_address);
- else if (device_type == SAS_EDGE_EXPANDER_DEVICE ||
- device_type == SAS_FANOUT_EXPANDER_DEVICE)
- mpt2sas_expander_remove(ioc, sas_address);
- ioc->logging_level &= ~MPT_DEBUG_TRANSPORT;
-}
-
-/**
- * _transport_delete_phy - helper function to removing single phy from port
- * @ioc: per adapter object
- * @mpt2sas_port: mpt2sas per port object
- * @mpt2sas_phy: mpt2sas per phy object
- *
- * Returns nothing.
- */
-static void
-_transport_delete_phy(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_port *mpt2sas_port, struct _sas_phy *mpt2sas_phy)
-{
- u64 sas_address = mpt2sas_port->remote_identify.sas_address;
-
- dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
- "remove: sas_addr(0x%016llx), phy(%d)\n",
- (unsigned long long) sas_address, mpt2sas_phy->phy_id);
-
- list_del(&mpt2sas_phy->port_siblings);
- mpt2sas_port->num_phys--;
- sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy);
- mpt2sas_phy->phy_belongs_to_port = 0;
-}
-
-/**
- * _transport_add_phy - helper function to adding single phy to port
- * @ioc: per adapter object
- * @mpt2sas_port: mpt2sas per port object
- * @mpt2sas_phy: mpt2sas per phy object
- *
- * Returns nothing.
- */
-static void
-_transport_add_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_port *mpt2sas_port,
- struct _sas_phy *mpt2sas_phy)
-{
- u64 sas_address = mpt2sas_port->remote_identify.sas_address;
-
- dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
- "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long)
- sas_address, mpt2sas_phy->phy_id);
-
- list_add_tail(&mpt2sas_phy->port_siblings, &mpt2sas_port->phy_list);
- mpt2sas_port->num_phys++;
- sas_port_add_phy(mpt2sas_port->port, mpt2sas_phy->phy);
- mpt2sas_phy->phy_belongs_to_port = 1;
-}
-
-/**
- * _transport_add_phy_to_an_existing_port - adding new phy to existing port
- * @ioc: per adapter object
- * @sas_node: sas node object (either expander or sas host)
- * @mpt2sas_phy: mpt2sas per phy object
- * @sas_address: sas address of device/expander were phy needs to be added to
- *
- * Returns nothing.
- */
-static void
-_transport_add_phy_to_an_existing_port(struct MPT2SAS_ADAPTER *ioc,
-struct _sas_node *sas_node, struct _sas_phy *mpt2sas_phy, u64 sas_address)
-{
- struct _sas_port *mpt2sas_port;
- struct _sas_phy *phy_srch;
-
- if (mpt2sas_phy->phy_belongs_to_port == 1)
- return;
-
- list_for_each_entry(mpt2sas_port, &sas_node->sas_port_list,
- port_list) {
- if (mpt2sas_port->remote_identify.sas_address !=
- sas_address)
- continue;
- list_for_each_entry(phy_srch, &mpt2sas_port->phy_list,
- port_siblings) {
- if (phy_srch == mpt2sas_phy)
- return;
- }
- _transport_add_phy(ioc, mpt2sas_port, mpt2sas_phy);
- return;
- }
-
-}
-
-/**
- * _transport_del_phy_from_an_existing_port - delete phy from existing port
- * @ioc: per adapter object
- * @sas_node: sas node object (either expander or sas host)
- * @mpt2sas_phy: mpt2sas per phy object
- *
- * Returns nothing.
- */
-static void
-_transport_del_phy_from_an_existing_port(struct MPT2SAS_ADAPTER *ioc,
- struct _sas_node *sas_node, struct _sas_phy *mpt2sas_phy)
-{
- struct _sas_port *mpt2sas_port, *next;
- struct _sas_phy *phy_srch;
-
- if (mpt2sas_phy->phy_belongs_to_port == 0)
- return;
-
- list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list,
- port_list) {
- list_for_each_entry(phy_srch, &mpt2sas_port->phy_list,
- port_siblings) {
- if (phy_srch != mpt2sas_phy)
- continue;
- if (mpt2sas_port->num_phys == 1)
- _transport_delete_port(ioc, mpt2sas_port);
- else
- _transport_delete_phy(ioc, mpt2sas_port,
- mpt2sas_phy);
- return;
- }
- }
-}
-
-/**
- * _transport_sanity_check - sanity check when adding a new port
- * @ioc: per adapter object
- * @sas_node: sas node object (either expander or sas host)
- * @sas_address: sas address of device being added
- *
- * See the explanation above from _transport_delete_duplicate_port
- */
-static void
-_transport_sanity_check(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_node,
- u64 sas_address)
-{
- int i;
-
- for (i = 0; i < sas_node->num_phys; i++) {
- if (sas_node->phy[i].remote_identify.sas_address != sas_address)
- continue;
- if (sas_node->phy[i].phy_belongs_to_port == 1)
- _transport_del_phy_from_an_existing_port(ioc, sas_node,
- &sas_node->phy[i]);
- }
-}
-
-/**
- * mpt2sas_transport_port_add - insert port to the list
- * @ioc: per adapter object
- * @handle: handle of attached device
- * @sas_address: sas address of parent expander or sas host
- * Context: This function will acquire ioc->sas_node_lock.
- *
- * Adding new port object to the sas_node->sas_port_list.
- *
- * Returns mpt2sas_port.
- */
-struct _sas_port *
-mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle,
- u64 sas_address)
-{
- struct _sas_phy *mpt2sas_phy, *next;
- struct _sas_port *mpt2sas_port;
- unsigned long flags;
- struct _sas_node *sas_node;
- struct sas_rphy *rphy;
- int i;
- struct sas_port *port;
-
- mpt2sas_port = kzalloc(sizeof(struct _sas_port),
- GFP_KERNEL);
- if (!mpt2sas_port) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return NULL;
- }
-
- INIT_LIST_HEAD(&mpt2sas_port->port_list);
- INIT_LIST_HEAD(&mpt2sas_port->phy_list);
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address);
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
- if (!sas_node) {
- printk(MPT2SAS_ERR_FMT "%s: Could not find "
- "parent sas_address(0x%016llx)!\n", ioc->name,
- __func__, (unsigned long long)sas_address);
- goto out_fail;
- }
-
- if ((_transport_set_identify(ioc, handle,
- &mpt2sas_port->remote_identify))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out_fail;
- }
-
- if (mpt2sas_port->remote_identify.device_type == SAS_PHY_UNUSED) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out_fail;
- }
-
- _transport_sanity_check(ioc, sas_node,
- mpt2sas_port->remote_identify.sas_address);
-
- for (i = 0; i < sas_node->num_phys; i++) {
- if (sas_node->phy[i].remote_identify.sas_address !=
- mpt2sas_port->remote_identify.sas_address)
- continue;
- list_add_tail(&sas_node->phy[i].port_siblings,
- &mpt2sas_port->phy_list);
- mpt2sas_port->num_phys++;
- }
-
- if (!mpt2sas_port->num_phys) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out_fail;
- }
-
- port = sas_port_alloc_num(sas_node->parent_dev);
- if ((sas_port_add(port))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- goto out_fail;
- }
-
- list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list,
- port_siblings) {
- if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
- dev_printk(KERN_INFO, &port->dev, "add: handle(0x%04x)"
- ", sas_addr(0x%016llx), phy(%d)\n", handle,
- (unsigned long long)
- mpt2sas_port->remote_identify.sas_address,
- mpt2sas_phy->phy_id);
- sas_port_add_phy(port, mpt2sas_phy->phy);
- mpt2sas_phy->phy_belongs_to_port = 1;
- }
-
- mpt2sas_port->port = port;
- if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE)
- rphy = sas_end_device_alloc(port);
- else
- rphy = sas_expander_alloc(port,
- mpt2sas_port->remote_identify.device_type);
-
- rphy->identify = mpt2sas_port->remote_identify;
- if ((sas_rphy_add(rphy))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- }
- if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
- dev_printk(KERN_INFO, &rphy->dev, "add: handle(0x%04x), "
- "sas_addr(0x%016llx)\n", handle,
- (unsigned long long)
- mpt2sas_port->remote_identify.sas_address);
- mpt2sas_port->rphy = rphy;
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- list_add_tail(&mpt2sas_port->port_list, &sas_node->sas_port_list);
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
- /* fill in report manufacture */
- if (mpt2sas_port->remote_identify.device_type ==
- MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
- mpt2sas_port->remote_identify.device_type ==
- MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
- _transport_expander_report_manufacture(ioc,
- mpt2sas_port->remote_identify.sas_address,
- rphy_to_expander_device(rphy));
-
- return mpt2sas_port;
-
- out_fail:
- list_for_each_entry_safe(mpt2sas_phy, next, &mpt2sas_port->phy_list,
- port_siblings)
- list_del(&mpt2sas_phy->port_siblings);
- kfree(mpt2sas_port);
- return NULL;
-}
-
-/**
- * mpt2sas_transport_port_remove - remove port from the list
- * @ioc: per adapter object
- * @sas_address: sas address of attached device
- * @sas_address_parent: sas address of parent expander or sas host
- * Context: This function will acquire ioc->sas_node_lock.
- *
- * Removing object and freeing associated memory from the
- * ioc->sas_port_list.
- *
- * Return nothing.
- */
-void
-mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
- u64 sas_address_parent)
-{
- int i;
- unsigned long flags;
- struct _sas_port *mpt2sas_port, *next;
- struct _sas_node *sas_node;
- u8 found = 0;
- struct _sas_phy *mpt2sas_phy, *next_phy;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_node = _transport_sas_node_find_by_sas_address(ioc,
- sas_address_parent);
- if (!sas_node) {
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- return;
- }
- list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list,
- port_list) {
- if (mpt2sas_port->remote_identify.sas_address != sas_address)
- continue;
- found = 1;
- list_del(&mpt2sas_port->port_list);
- goto out;
- }
- out:
- if (!found) {
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- return;
- }
-
- for (i = 0; i < sas_node->num_phys; i++) {
- if (sas_node->phy[i].remote_identify.sas_address == sas_address)
- memset(&sas_node->phy[i].remote_identify, 0 ,
- sizeof(struct sas_identify));
- }
-
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- list_for_each_entry_safe(mpt2sas_phy, next_phy,
- &mpt2sas_port->phy_list, port_siblings) {
- if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
- dev_printk(KERN_INFO, &mpt2sas_port->port->dev,
- "remove: sas_addr(0x%016llx), phy(%d)\n",
- (unsigned long long)
- mpt2sas_port->remote_identify.sas_address,
- mpt2sas_phy->phy_id);
- mpt2sas_phy->phy_belongs_to_port = 0;
- sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy);
- list_del(&mpt2sas_phy->port_siblings);
- }
- sas_port_delete(mpt2sas_port->port);
- kfree(mpt2sas_port);
-}
-
-/**
- * mpt2sas_transport_add_host_phy - report sas_host phy to transport
- * @ioc: per adapter object
- * @mpt2sas_phy: mpt2sas per phy object
- * @phy_pg0: sas phy page 0
- * @parent_dev: parent device class object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
- *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev)
-{
- struct sas_phy *phy;
- int phy_index = mpt2sas_phy->phy_id;
-
-
- INIT_LIST_HEAD(&mpt2sas_phy->port_siblings);
- phy = sas_phy_alloc(parent_dev, phy_index);
- if (!phy) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
- if ((_transport_set_identify(ioc, mpt2sas_phy->handle,
- &mpt2sas_phy->identify))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
- phy->identify = mpt2sas_phy->identify;
- mpt2sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle);
- if (mpt2sas_phy->attached_handle)
- _transport_set_identify(ioc, mpt2sas_phy->attached_handle,
- &mpt2sas_phy->remote_identify);
- phy->identify.phy_identifier = mpt2sas_phy->phy_id;
- phy->negotiated_linkrate = _transport_convert_phy_link_rate(
- phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
- phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
- phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
- phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
- phy_pg0.HwLinkRate >> 4);
- phy->minimum_linkrate = _transport_convert_phy_link_rate(
- phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
- phy->maximum_linkrate = _transport_convert_phy_link_rate(
- phy_pg0.ProgrammedLinkRate >> 4);
-
- if ((sas_phy_add(phy))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- sas_phy_free(phy);
- return -1;
- }
- if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
- dev_printk(KERN_INFO, &phy->dev,
- "add: handle(0x%04x), sas_addr(0x%016llx)\n"
- "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
- mpt2sas_phy->handle, (unsigned long long)
- mpt2sas_phy->identify.sas_address,
- mpt2sas_phy->attached_handle,
- (unsigned long long)
- mpt2sas_phy->remote_identify.sas_address);
- mpt2sas_phy->phy = phy;
- return 0;
-}
-
-
-/**
- * mpt2sas_transport_add_expander_phy - report expander phy to transport
- * @ioc: per adapter object
- * @mpt2sas_phy: mpt2sas per phy object
- * @expander_pg1: expander page 1
- * @parent_dev: parent device class object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
- *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev)
-{
- struct sas_phy *phy;
- int phy_index = mpt2sas_phy->phy_id;
-
- INIT_LIST_HEAD(&mpt2sas_phy->port_siblings);
- phy = sas_phy_alloc(parent_dev, phy_index);
- if (!phy) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
- if ((_transport_set_identify(ioc, mpt2sas_phy->handle,
- &mpt2sas_phy->identify))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -1;
- }
- phy->identify = mpt2sas_phy->identify;
- mpt2sas_phy->attached_handle =
- le16_to_cpu(expander_pg1.AttachedDevHandle);
- if (mpt2sas_phy->attached_handle)
- _transport_set_identify(ioc, mpt2sas_phy->attached_handle,
- &mpt2sas_phy->remote_identify);
- phy->identify.phy_identifier = mpt2sas_phy->phy_id;
- phy->negotiated_linkrate = _transport_convert_phy_link_rate(
- expander_pg1.NegotiatedLinkRate &
- MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
- phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
- expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
- phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
- expander_pg1.HwLinkRate >> 4);
- phy->minimum_linkrate = _transport_convert_phy_link_rate(
- expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
- phy->maximum_linkrate = _transport_convert_phy_link_rate(
- expander_pg1.ProgrammedLinkRate >> 4);
-
- if ((sas_phy_add(phy))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- sas_phy_free(phy);
- return -1;
- }
- if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
- dev_printk(KERN_INFO, &phy->dev,
- "add: handle(0x%04x), sas_addr(0x%016llx)\n"
- "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
- mpt2sas_phy->handle, (unsigned long long)
- mpt2sas_phy->identify.sas_address,
- mpt2sas_phy->attached_handle,
- (unsigned long long)
- mpt2sas_phy->remote_identify.sas_address);
- mpt2sas_phy->phy = phy;
- return 0;
-}
-
-/**
- * mpt2sas_transport_update_links - refreshing phy link changes
- * @ioc: per adapter object
- * @sas_address: sas address of parent expander or sas host
- * @handle: attached device handle
- * @phy_numberv: phy number
- * @link_rate: new link rate
- *
- * Returns nothing.
- */
-void
-mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address, u16 handle, u8 phy_number, u8 link_rate)
-{
- unsigned long flags;
- struct _sas_node *sas_node;
- struct _sas_phy *mpt2sas_phy;
-
- if (ioc->shost_recovery || ioc->pci_error_recovery)
- return;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address);
- if (!sas_node) {
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- return;
- }
-
- mpt2sas_phy = &sas_node->phy[phy_number];
- mpt2sas_phy->attached_handle = handle;
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) {
- _transport_set_identify(ioc, handle,
- &mpt2sas_phy->remote_identify);
- _transport_add_phy_to_an_existing_port(ioc, sas_node,
- mpt2sas_phy, mpt2sas_phy->remote_identify.sas_address);
- } else
- memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct
- sas_identify));
-
- if (mpt2sas_phy->phy)
- mpt2sas_phy->phy->negotiated_linkrate =
- _transport_convert_phy_link_rate(link_rate);
-
- if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
- dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
- "refresh: parent sas_addr(0x%016llx),\n"
- "\tlink_rate(0x%02x), phy(%d)\n"
- "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
- (unsigned long long)sas_address,
- link_rate, phy_number, handle, (unsigned long long)
- mpt2sas_phy->remote_identify.sas_address);
-}
-
-static inline void *
-phy_to_ioc(struct sas_phy *phy)
-{
- struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
- return shost_priv(shost);
-}
-
-static inline void *
-rphy_to_ioc(struct sas_rphy *rphy)
-{
- struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
- return shost_priv(shost);
-}
-
-
-/* report phy error log structure */
-struct phy_error_log_request{
- u8 smp_frame_type; /* 0x40 */
- u8 function; /* 0x11 */
- u8 allocated_response_length;
- u8 request_length; /* 02 */
- u8 reserved_1[5];
- u8 phy_identifier;
- u8 reserved_2[2];
-};
-
-/* report phy error log reply structure */
-struct phy_error_log_reply{
- u8 smp_frame_type; /* 0x41 */
- u8 function; /* 0x11 */
- u8 function_result;
- u8 response_length;
- __be16 expander_change_count;
- u8 reserved_1[3];
- u8 phy_identifier;
- u8 reserved_2[2];
- __be32 invalid_dword;
- __be32 running_disparity_error;
- __be32 loss_of_dword_sync;
- __be32 phy_reset_problem;
-};
-
-/**
- * _transport_get_expander_phy_error_log - return expander counters
- * @ioc: per adapter object
- * @phy: The sas phy object
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_transport_get_expander_phy_error_log(struct MPT2SAS_ADAPTER *ioc,
- struct sas_phy *phy)
-{
- Mpi2SmpPassthroughRequest_t *mpi_request;
- Mpi2SmpPassthroughReply_t *mpi_reply;
- struct phy_error_log_request *phy_error_log_request;
- struct phy_error_log_reply *phy_error_log_reply;
- int rc;
- u16 smid;
- u32 ioc_state;
- unsigned long timeleft;
- void *psge;
- u32 sgl_flags;
- u8 issue_reset = 0;
- void *data_out = NULL;
- dma_addr_t data_out_dma;
- u32 sz;
- u16 wait_state_count;
-
- if (ioc->shost_recovery || ioc->pci_error_recovery) {
- printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
- __func__, ioc->name);
- return -EFAULT;
- }
-
- mutex_lock(&ioc->transport_cmds.mutex);
-
- if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
- ioc->transport_cmds.status = MPT2_CMD_PENDING;
-
- wait_state_count = 0;
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- if (wait_state_count++ == 10) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed due to ioc not operational\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto out;
- }
- ssleep(1);
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- printk(MPT2SAS_INFO_FMT "%s: waiting for "
- "operational state(count=%d)\n", ioc->name,
- __func__, wait_state_count);
- }
- if (wait_state_count)
- printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
- ioc->name, __func__);
-
- smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->transport_cmds.smid = smid;
-
- sz = sizeof(struct phy_error_log_request) +
- sizeof(struct phy_error_log_reply);
- data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
- if (!data_out) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- rc = -ENOMEM;
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
-
- rc = -EINVAL;
- memset(data_out, 0, sz);
- phy_error_log_request = data_out;
- phy_error_log_request->smp_frame_type = 0x40;
- phy_error_log_request->function = 0x11;
- phy_error_log_request->request_length = 2;
- phy_error_log_request->allocated_response_length = 0;
- phy_error_log_request->phy_identifier = phy->number;
-
- memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
- mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
- mpi_request->PhysicalPort = 0xFF;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
- mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
- mpi_request->RequestDataLength =
- cpu_to_le16(sizeof(struct phy_error_log_request));
- psge = &mpi_request->SGL;
-
- /* WRITE sgel first */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- sizeof(struct phy_error_log_request), data_out_dma);
-
- /* incr sgel */
- psge += ioc->sge_size;
-
- /* READ sgel last */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
- MPI2_SGE_FLAGS_END_OF_LIST);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- sizeof(struct phy_error_log_reply), data_out_dma +
- sizeof(struct phy_error_log_request));
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_error_log - "
- "send to sas_addr(0x%016llx), phy(%d)\n", ioc->name,
- (unsigned long long)phy->identify.sas_address, phy->number));
- init_completion(&ioc->transport_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
- 10*HZ);
-
- if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2SmpPassthroughRequest_t)/4);
- if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
- }
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_error_log - "
- "complete\n", ioc->name));
-
- if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
-
- mpi_reply = ioc->transport_cmds.reply;
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "phy_error_log - reply data transfer size(%d)\n",
- ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
-
- if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
- sizeof(struct phy_error_log_reply))
- goto out;
-
- phy_error_log_reply = data_out +
- sizeof(struct phy_error_log_request);
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "phy_error_log - function_result(%d)\n",
- ioc->name, phy_error_log_reply->function_result));
-
- phy->invalid_dword_count =
- be32_to_cpu(phy_error_log_reply->invalid_dword);
- phy->running_disparity_error_count =
- be32_to_cpu(phy_error_log_reply->running_disparity_error);
- phy->loss_of_dword_sync_count =
- be32_to_cpu(phy_error_log_reply->loss_of_dword_sync);
- phy->phy_reset_problem_count =
- be32_to_cpu(phy_error_log_reply->phy_reset_problem);
- rc = 0;
- } else
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "phy_error_log - no reply\n", ioc->name));
-
- issue_host_reset:
- if (issue_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- out:
- ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
- if (data_out)
- pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
-
- mutex_unlock(&ioc->transport_cmds.mutex);
- return rc;
-}
-
-/**
- * _transport_get_linkerrors - return phy counters for both hba and expanders
- * @phy: The sas phy object
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_transport_get_linkerrors(struct sas_phy *phy)
-{
- struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
- unsigned long flags;
- Mpi2ConfigReply_t mpi_reply;
- Mpi2SasPhyPage1_t phy_pg1;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- if (_transport_sas_node_find_by_sas_address(ioc,
- phy->identify.sas_address) == NULL) {
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- return -EINVAL;
- }
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
- if (phy->identify.sas_address != ioc->sas_hba.sas_address)
- return _transport_get_expander_phy_error_log(ioc, phy);
-
- /* get hba phy error logs */
- if ((mpt2sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1,
- phy->number))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -ENXIO;
- }
-
- if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
- printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status"
- "(0x%04x), loginfo(0x%08x)\n", ioc->name,
- phy->number, le16_to_cpu(mpi_reply.IOCStatus),
- le32_to_cpu(mpi_reply.IOCLogInfo));
-
- phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount);
- phy->running_disparity_error_count =
- le32_to_cpu(phy_pg1.RunningDisparityErrorCount);
- phy->loss_of_dword_sync_count =
- le32_to_cpu(phy_pg1.LossDwordSynchCount);
- phy->phy_reset_problem_count =
- le32_to_cpu(phy_pg1.PhyResetProblemCount);
- return 0;
-}
-
-/**
- * _transport_get_enclosure_identifier -
- * @phy: The sas phy object
- *
- * Obtain the enclosure logical id for an expander.
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
-{
- struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
- struct _sas_device *sas_device;
- unsigned long flags;
- int rc;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- rphy->identify.sas_address);
- if (sas_device) {
- *identifier = sas_device->enclosure_logical_id;
- rc = 0;
- sas_device_put(sas_device);
- } else {
- *identifier = 0;
- rc = -ENXIO;
- }
-
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return rc;
-}
-
-/**
- * _transport_get_bay_identifier -
- * @phy: The sas phy object
- *
- * Returns the slot id for a device that resides inside an enclosure.
- */
-static int
-_transport_get_bay_identifier(struct sas_rphy *rphy)
-{
- struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
- struct _sas_device *sas_device;
- unsigned long flags;
- int rc;
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = __mpt2sas_get_sdev_by_addr(ioc,
- rphy->identify.sas_address);
- if (sas_device) {
- rc = sas_device->slot;
- sas_device_put(sas_device);
- } else {
- rc = -ENXIO;
- }
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return rc;
-}
-
-/* phy control request structure */
-struct phy_control_request{
- u8 smp_frame_type; /* 0x40 */
- u8 function; /* 0x91 */
- u8 allocated_response_length;
- u8 request_length; /* 0x09 */
- u16 expander_change_count;
- u8 reserved_1[3];
- u8 phy_identifier;
- u8 phy_operation;
- u8 reserved_2[13];
- u64 attached_device_name;
- u8 programmed_min_physical_link_rate;
- u8 programmed_max_physical_link_rate;
- u8 reserved_3[6];
-};
-
-/* phy control reply structure */
-struct phy_control_reply{
- u8 smp_frame_type; /* 0x41 */
- u8 function; /* 0x11 */
- u8 function_result;
- u8 response_length;
-};
-
-#define SMP_PHY_CONTROL_LINK_RESET (0x01)
-#define SMP_PHY_CONTROL_HARD_RESET (0x02)
-#define SMP_PHY_CONTROL_DISABLE (0x03)
-
-/**
- * _transport_expander_phy_control - expander phy control
- * @ioc: per adapter object
- * @phy: The sas phy object
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_transport_expander_phy_control(struct MPT2SAS_ADAPTER *ioc,
- struct sas_phy *phy, u8 phy_operation)
-{
- Mpi2SmpPassthroughRequest_t *mpi_request;
- Mpi2SmpPassthroughReply_t *mpi_reply;
- struct phy_control_request *phy_control_request;
- struct phy_control_reply *phy_control_reply;
- int rc;
- u16 smid;
- u32 ioc_state;
- unsigned long timeleft;
- void *psge;
- u32 sgl_flags;
- u8 issue_reset = 0;
- void *data_out = NULL;
- dma_addr_t data_out_dma;
- u32 sz;
- u16 wait_state_count;
-
- if (ioc->shost_recovery) {
- printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
- __func__, ioc->name);
- return -EFAULT;
- }
-
- mutex_lock(&ioc->transport_cmds.mutex);
-
- if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
- ioc->transport_cmds.status = MPT2_CMD_PENDING;
-
- wait_state_count = 0;
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- if (wait_state_count++ == 10) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed due to ioc not operational\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto out;
- }
- ssleep(1);
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- printk(MPT2SAS_INFO_FMT "%s: waiting for "
- "operational state(count=%d)\n", ioc->name,
- __func__, wait_state_count);
- }
- if (wait_state_count)
- printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
- ioc->name, __func__);
-
- smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->transport_cmds.smid = smid;
-
- sz = sizeof(struct phy_control_request) +
- sizeof(struct phy_control_reply);
- data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
- if (!data_out) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
- rc = -ENOMEM;
- mpt2sas_base_free_smid(ioc, smid);
- goto out;
- }
-
- rc = -EINVAL;
- memset(data_out, 0, sz);
- phy_control_request = data_out;
- phy_control_request->smp_frame_type = 0x40;
- phy_control_request->function = 0x91;
- phy_control_request->request_length = 9;
- phy_control_request->allocated_response_length = 0;
- phy_control_request->phy_identifier = phy->number;
- phy_control_request->phy_operation = phy_operation;
- phy_control_request->programmed_min_physical_link_rate =
- phy->minimum_linkrate << 4;
- phy_control_request->programmed_max_physical_link_rate =
- phy->maximum_linkrate << 4;
-
- memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
- mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
- mpi_request->PhysicalPort = 0xFF;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
- mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
- mpi_request->RequestDataLength =
- cpu_to_le16(sizeof(struct phy_error_log_request));
- psge = &mpi_request->SGL;
-
- /* WRITE sgel first */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- sizeof(struct phy_control_request), data_out_dma);
-
- /* incr sgel */
- psge += ioc->sge_size;
-
- /* READ sgel last */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
- MPI2_SGE_FLAGS_END_OF_LIST);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- ioc->base_add_sg_single(psge, sgl_flags |
- sizeof(struct phy_control_reply), data_out_dma +
- sizeof(struct phy_control_request));
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_control - "
- "send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n", ioc->name,
- (unsigned long long)phy->identify.sas_address, phy->number,
- phy_operation));
-
- init_completion(&ioc->transport_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
- 10*HZ);
-
- if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s: timeout\n",
- ioc->name, __func__);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2SmpPassthroughRequest_t)/4);
- if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
- }
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_control - "
- "complete\n", ioc->name));
-
- if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
-
- mpi_reply = ioc->transport_cmds.reply;
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "phy_control - reply data transfer size(%d)\n",
- ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
-
- if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
- sizeof(struct phy_control_reply))
- goto out;
-
- phy_control_reply = data_out +
- sizeof(struct phy_control_request);
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "phy_control - function_result(%d)\n",
- ioc->name, phy_control_reply->function_result));
-
- rc = 0;
- } else
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "phy_control - no reply\n", ioc->name));
-
- issue_host_reset:
- if (issue_reset)
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- out:
- ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
- if (data_out)
- pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
-
- mutex_unlock(&ioc->transport_cmds.mutex);
- return rc;
-}
-
-/**
- * _transport_phy_reset -
- * @phy: The sas phy object
- * @hard_reset:
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_phy_reset(struct sas_phy *phy, int hard_reset)
-{
- struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
- Mpi2SasIoUnitControlReply_t mpi_reply;
- Mpi2SasIoUnitControlRequest_t mpi_request;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- if (_transport_sas_node_find_by_sas_address(ioc,
- phy->identify.sas_address) == NULL) {
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- return -EINVAL;
- }
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
- /* handle expander phys */
- if (phy->identify.sas_address != ioc->sas_hba.sas_address)
- return _transport_expander_phy_control(ioc, phy,
- (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET :
- SMP_PHY_CONTROL_LINK_RESET);
-
- /* handle hba phys */
- memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t));
- mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
- mpi_request.Operation = hard_reset ?
- MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET;
- mpi_request.PhyNum = phy->number;
-
- if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return -ENXIO;
- }
-
- if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
- printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status"
- "(0x%04x), loginfo(0x%08x)\n", ioc->name,
- phy->number, le16_to_cpu(mpi_reply.IOCStatus),
- le32_to_cpu(mpi_reply.IOCLogInfo));
-
- return 0;
-}
-
-/**
- * _transport_phy_enable - enable/disable phys
- * @phy: The sas phy object
- * @enable: enable phy when true
- *
- * Only support sas_host direct attached phys.
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_phy_enable(struct sas_phy *phy, int enable)
-{
- struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
- Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
- Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
- Mpi2ConfigReply_t mpi_reply;
- u16 ioc_status;
- u16 sz;
- int rc = 0;
- unsigned long flags;
- int i, discovery_active;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- if (_transport_sas_node_find_by_sas_address(ioc,
- phy->identify.sas_address) == NULL) {
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- return -EINVAL;
- }
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
- /* handle expander phys */
- if (phy->identify.sas_address != ioc->sas_hba.sas_address)
- return _transport_expander_phy_control(ioc, phy,
- (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET :
- SMP_PHY_CONTROL_DISABLE);
-
- /* handle hba phys */
-
- /* read sas_iounit page 0 */
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit0PhyData_t));
- sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
- if (!sas_iounit_pg0) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -ENOMEM;
- goto out;
- }
- if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
- sas_iounit_pg0, sz))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -ENXIO;
- goto out;
- }
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -EIO;
- goto out;
- }
-
- /* unable to enable/disable phys when when discovery is active */
- for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) {
- if (sas_iounit_pg0->PhyData[i].PortFlags &
- MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) {
- printk(MPT2SAS_ERR_FMT "discovery is active on "
- "port = %d, phy = %d: unable to enable/disable "
- "phys, try again later!\n", ioc->name,
- sas_iounit_pg0->PhyData[i].Port, i);
- discovery_active = 1;
- }
- }
-
- if (discovery_active) {
- rc = -EAGAIN;
- goto out;
- }
-
- /* read sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
- sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
- if (!sas_iounit_pg1) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -ENOMEM;
- goto out;
- }
- if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
- sas_iounit_pg1, sz))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -ENXIO;
- goto out;
- }
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -EIO;
- goto out;
- }
- /* copy Port/PortFlags/PhyFlags from page 0 */
- for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
- sas_iounit_pg1->PhyData[i].Port =
- sas_iounit_pg0->PhyData[i].Port;
- sas_iounit_pg1->PhyData[i].PortFlags =
- (sas_iounit_pg0->PhyData[i].PortFlags &
- MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG);
- sas_iounit_pg1->PhyData[i].PhyFlags =
- (sas_iounit_pg0->PhyData[i].PhyFlags &
- (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED +
- MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED));
- }
- if (enable)
- sas_iounit_pg1->PhyData[phy->number].PhyFlags
- &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
- else
- sas_iounit_pg1->PhyData[phy->number].PhyFlags
- |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
-
- mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz);
-
- /* link reset */
- if (enable)
- _transport_phy_reset(phy, 0);
-
- out:
- kfree(sas_iounit_pg1);
- kfree(sas_iounit_pg0);
- return rc;
-}
-
-/**
- * _transport_phy_speed - set phy min/max link rates
- * @phy: The sas phy object
- * @rates: rates defined in sas_phy_linkrates
- *
- * Only support sas_host direct attached phys.
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
-{
- struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
- Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
- Mpi2SasPhyPage0_t phy_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u16 ioc_status;
- u16 sz;
- int i;
- int rc = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- if (_transport_sas_node_find_by_sas_address(ioc,
- phy->identify.sas_address) == NULL) {
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- return -EINVAL;
- }
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
- if (!rates->minimum_linkrate)
- rates->minimum_linkrate = phy->minimum_linkrate;
- else if (rates->minimum_linkrate < phy->minimum_linkrate_hw)
- rates->minimum_linkrate = phy->minimum_linkrate_hw;
-
- if (!rates->maximum_linkrate)
- rates->maximum_linkrate = phy->maximum_linkrate;
- else if (rates->maximum_linkrate > phy->maximum_linkrate_hw)
- rates->maximum_linkrate = phy->maximum_linkrate_hw;
-
- /* handle expander phys */
- if (phy->identify.sas_address != ioc->sas_hba.sas_address) {
- phy->minimum_linkrate = rates->minimum_linkrate;
- phy->maximum_linkrate = rates->maximum_linkrate;
- return _transport_expander_phy_control(ioc, phy,
- SMP_PHY_CONTROL_LINK_RESET);
- }
-
- /* handle hba phys */
-
- /* sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
- sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
- if (!sas_iounit_pg1) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -ENOMEM;
- goto out;
- }
- if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
- sas_iounit_pg1, sz))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -ENXIO;
- goto out;
- }
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -EIO;
- goto out;
- }
-
- for (i = 0; i < ioc->sas_hba.num_phys; i++) {
- if (phy->number != i) {
- sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
- (ioc->sas_hba.phy[i].phy->minimum_linkrate +
- (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4));
- } else {
- sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
- (rates->minimum_linkrate +
- (rates->maximum_linkrate << 4));
- }
- }
-
- if (mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
- sz)) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- rc = -ENXIO;
- goto out;
- }
-
- /* link reset */
- _transport_phy_reset(phy, 0);
-
- /* read phy page 0, then update the rates in the sas transport phy */
- if (!mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
- phy->number)) {
- phy->minimum_linkrate = _transport_convert_phy_link_rate(
- phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
- phy->maximum_linkrate = _transport_convert_phy_link_rate(
- phy_pg0.ProgrammedLinkRate >> 4);
- phy->negotiated_linkrate = _transport_convert_phy_link_rate(
- phy_pg0.NegotiatedLinkRate &
- MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
- }
-
- out:
- kfree(sas_iounit_pg1);
- return rc;
-}
-
-
-/**
- * _transport_smp_handler - transport portal for smp passthru
- * @shost: shost object
- * @rphy: sas transport rphy object
- * @req:
- *
- * This used primarily for smp_utils.
- * Example:
- * smp_rep_general /sys/class/bsg/expander-5:0
- */
-static int
-_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
- struct request *req)
-{
- struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- Mpi2SmpPassthroughRequest_t *mpi_request;
- Mpi2SmpPassthroughReply_t *mpi_reply;
- int rc;
- u16 smid;
- u32 ioc_state;
- unsigned long timeleft;
- void *psge;
- u32 sgl_flags;
- u8 issue_reset = 0;
- dma_addr_t dma_addr_in = 0;
- dma_addr_t dma_addr_out = 0;
- dma_addr_t pci_dma_in = 0;
- dma_addr_t pci_dma_out = 0;
- void *pci_addr_in = NULL;
- void *pci_addr_out = NULL;
- u16 wait_state_count;
- struct request *rsp = req->next_rq;
- struct bio_vec bvec;
- struct bvec_iter iter;
-
- if (!rsp) {
- printk(MPT2SAS_ERR_FMT "%s: the smp response space is "
- "missing\n", ioc->name, __func__);
- return -EINVAL;
- }
- if (ioc->shost_recovery || ioc->pci_error_recovery) {
- printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
- __func__, ioc->name);
- return -EFAULT;
- }
-
- rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex);
- if (rc)
- return rc;
-
- if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", ioc->name,
- __func__);
- rc = -EAGAIN;
- goto out;
- }
- ioc->transport_cmds.status = MPT2_CMD_PENDING;
-
- /* Check if the request is split across multiple segments */
- if (bio_multiple_segments(req->bio)) {
- u32 offset = 0;
-
- /* Allocate memory and copy the request */
- pci_addr_out = pci_alloc_consistent(ioc->pdev,
- blk_rq_bytes(req), &pci_dma_out);
- if (!pci_addr_out) {
- printk(MPT2SAS_INFO_FMT "%s(): PCI Addr out = NULL\n",
- ioc->name, __func__);
- rc = -ENOMEM;
- goto out;
- }
-
- bio_for_each_segment(bvec, req->bio, iter) {
- memcpy(pci_addr_out + offset,
- page_address(bvec.bv_page) + bvec.bv_offset,
- bvec.bv_len);
- offset += bvec.bv_len;
- }
- } else {
- dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
- blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
- if (!dma_addr_out) {
- printk(MPT2SAS_INFO_FMT "%s(): DMA Addr out = NULL\n",
- ioc->name, __func__);
- rc = -ENOMEM;
- goto free_pci;
- }
- }
-
- /* Check if the response needs to be populated across
- * multiple segments */
- if (bio_multiple_segments(rsp->bio)) {
- pci_addr_in = pci_alloc_consistent(ioc->pdev, blk_rq_bytes(rsp),
- &pci_dma_in);
- if (!pci_addr_in) {
- printk(MPT2SAS_INFO_FMT "%s(): PCI Addr in = NULL\n",
- ioc->name, __func__);
- rc = -ENOMEM;
- goto unmap;
- }
- } else {
- dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
- blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
- if (!dma_addr_in) {
- printk(MPT2SAS_INFO_FMT "%s(): DMA Addr in = NULL\n",
- ioc->name, __func__);
- rc = -ENOMEM;
- goto unmap;
- }
- }
-
- wait_state_count = 0;
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- if (wait_state_count++ == 10) {
- printk(MPT2SAS_ERR_FMT
- "%s: failed due to ioc not operational\n",
- ioc->name, __func__);
- rc = -EFAULT;
- goto unmap;
- }
- ssleep(1);
- ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
- printk(MPT2SAS_INFO_FMT "%s: waiting for "
- "operational state(count=%d)\n", ioc->name,
- __func__, wait_state_count);
- }
- if (wait_state_count)
- printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
- ioc->name, __func__);
-
- smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
- if (!smid) {
- printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto unmap;
- }
-
- rc = 0;
- mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->transport_cmds.smid = smid;
-
- memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
- mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
- mpi_request->PhysicalPort = 0xFF;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
- mpi_request->SASAddress = (rphy) ?
- cpu_to_le64(rphy->identify.sas_address) :
- cpu_to_le64(ioc->sas_hba.sas_address);
- mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
- psge = &mpi_request->SGL;
-
- /* WRITE sgel first */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- if (bio_multiple_segments(req->bio)) {
- ioc->base_add_sg_single(psge, sgl_flags |
- (blk_rq_bytes(req) - 4), pci_dma_out);
- } else {
- ioc->base_add_sg_single(psge, sgl_flags |
- (blk_rq_bytes(req) - 4), dma_addr_out);
- }
-
- /* incr sgel */
- psge += ioc->sge_size;
-
- /* READ sgel last */
- sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
- MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
- MPI2_SGE_FLAGS_END_OF_LIST);
- sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
- if (bio_multiple_segments(rsp->bio)) {
- ioc->base_add_sg_single(psge, sgl_flags |
- (blk_rq_bytes(rsp) + 4), pci_dma_in);
- } else {
- ioc->base_add_sg_single(psge, sgl_flags |
- (blk_rq_bytes(rsp) + 4), dma_addr_in);
- }
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "%s - "
- "sending smp request\n", ioc->name, __func__));
-
- init_completion(&ioc->transport_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid);
- timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
- 10*HZ);
-
- if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
- printk(MPT2SAS_ERR_FMT "%s : timeout\n",
- __func__, ioc->name);
- _debug_dump_mf(mpi_request,
- sizeof(Mpi2SmpPassthroughRequest_t)/4);
- if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
- }
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "%s - "
- "complete\n", ioc->name, __func__));
-
- if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
-
- mpi_reply = ioc->transport_cmds.reply;
-
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "%s - reply data transfer size(%d)\n",
- ioc->name, __func__,
- le16_to_cpu(mpi_reply->ResponseDataLength)));
-
- memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
- req->sense_len = sizeof(*mpi_reply);
- req->resid_len = 0;
- rsp->resid_len -=
- le16_to_cpu(mpi_reply->ResponseDataLength);
- /* check if the resp needs to be copied from the allocated
- * pci mem */
- if (bio_multiple_segments(rsp->bio)) {
- u32 offset = 0;
- u32 bytes_to_copy =
- le16_to_cpu(mpi_reply->ResponseDataLength);
- bio_for_each_segment(bvec, rsp->bio, iter) {
- if (bytes_to_copy <= bvec.bv_len) {
- memcpy(page_address(bvec.bv_page) +
- bvec.bv_offset, pci_addr_in +
- offset, bytes_to_copy);
- break;
- } else {
- memcpy(page_address(bvec.bv_page) +
- bvec.bv_offset, pci_addr_in +
- offset, bvec.bv_len);
- bytes_to_copy -= bvec.bv_len;
- }
- offset += bvec.bv_len;
- }
- }
- } else {
- dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
- "%s - no reply\n", ioc->name, __func__));
- rc = -ENXIO;
- }
-
- issue_host_reset:
- if (issue_reset) {
- mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
- FORCE_BIG_HAMMER);
- rc = -ETIMEDOUT;
- }
-
- unmap:
- if (dma_addr_out)
- pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
- PCI_DMA_BIDIRECTIONAL);
- if (dma_addr_in)
- pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
- PCI_DMA_BIDIRECTIONAL);
-
- free_pci:
- if (pci_addr_out)
- pci_free_consistent(ioc->pdev, blk_rq_bytes(req), pci_addr_out,
- pci_dma_out);
-
- if (pci_addr_in)
- pci_free_consistent(ioc->pdev, blk_rq_bytes(rsp), pci_addr_in,
- pci_dma_in);
-
- out:
- ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
- mutex_unlock(&ioc->transport_cmds.mutex);
- return rc;
-}
-
-struct sas_function_template mpt2sas_transport_functions = {
- .get_linkerrors = _transport_get_linkerrors,
- .get_enclosure_identifier = _transport_get_enclosure_identifier,
- .get_bay_identifier = _transport_get_bay_identifier,
- .phy_reset = _transport_phy_reset,
- .phy_enable = _transport_phy_enable,
- .set_phy_speed = _transport_phy_speed,
- .smp_handler = _transport_smp_handler,
-};
-
-struct scsi_transport_template *mpt2sas_transport_template;
# USA.
config SCSI_MPT3SAS
- tristate "LSI MPT Fusion SAS 3.0 Device Driver"
+ tristate "LSI MPT Fusion SAS 3.0 & SAS 2.0 Device Driver"
depends on PCI && SCSI
select SCSI_SAS_ATTRS
select RAID_ATTRS
---help---
This driver supports PCI-Express SAS 12Gb/s Host Adapters.
-config SCSI_MPT3SAS_MAX_SGE
- int "LSI MPT Fusion Max number of SG Entries (16 - 256)"
+config SCSI_MPT2SAS_MAX_SGE
+ int "LSI MPT Fusion SAS 2.0 Max number of SG Entries (16 - 256)"
depends on PCI && SCSI && SCSI_MPT3SAS
default "128"
range 16 256
can be 256. However, it may decreased down to 16. Decreasing this
parameter will reduce memory requirements on a per controller instance.
-config SCSI_MPT3SAS_LOGGING
- bool "LSI MPT Fusion logging facility"
+config SCSI_MPT3SAS_MAX_SGE
+ int "LSI MPT Fusion SAS 3.0 Max number of SG Entries (16 - 256)"
depends on PCI && SCSI && SCSI_MPT3SAS
+ default "128"
+ range 16 256
---help---
- This turns on a logging facility.
+ This option allows you to specify the maximum number of scatter-
+ gather entries per I/O. The driver default is 128, which matches
+ MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this
+ can be 256. However, it may decreased down to 16. Decreasing this
+ parameter will reduce memory requirements on a per controller instance.
mpt3sas_scsih.o \
mpt3sas_transport.o \
mpt3sas_ctl.o \
- mpt3sas_trigger_diag.o
+ mpt3sas_trigger_diag.o \
+ mpt3sas_warpdrive.o
if (ret)
return ret;
+ /* global ioc spinlock to protect controller list on list operations */
pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
+ spin_lock(&gioc_lock);
list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
ioc->fwfault_debug = mpt3sas_fwfault_debug;
+ spin_unlock(&gioc_lock);
return 0;
}
module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->shost_recovery)
+ if (ioc->shost_recovery || ioc->pci_error_recovery)
goto rearm_timer;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n",
ioc->name);
+ /* It may be possible that EEH recovery can resolve some of
+ * pci bus failure issues rather removing the dead ioc function
+ * by considering controller is in a non-operational state. So
+ * here priority is given to the EEH recovery. If it doesn't
+ * not resolve this issue, mpt3sas driver will consider this
+ * controller to non-operational state and remove the dead ioc
+ * function.
+ */
+ if (ioc->non_operational_loop++ < 5) {
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
+ flags);
+ goto rearm_timer;
+ }
+
/*
* Call _scsih_flush_pending_cmds callback so that we flush all
* pending commands back to OS. This call is required to aovid
ioc->remove_host = 1;
/*Remove the Dead Host */
p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
- "mpt3sas_dead_ioc_%d", ioc->id);
+ "%s_dead_ioc_%d", ioc->driver_name, ioc->id);
if (IS_ERR(p))
pr_err(MPT3SAS_FMT
"%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
return; /* don't rearm timer */
}
+ ioc->non_operational_loop = 0;
+
if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
snprintf(ioc->fault_reset_work_q_name,
- sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+ sizeof(ioc->fault_reset_work_q_name), "poll_%s%d_status",
+ ioc->driver_name, ioc->id);
ioc->fault_reset_work_q =
create_singlethread_workqueue(ioc->fault_reset_work_q_name);
if (!ioc->fault_reset_work_q) {
panic("panic in %s\n", __func__);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
* @ioc: per adapter object
desc = "Device Status Change";
break;
case MPI2_EVENT_IR_OPERATION_STATUS:
- desc = "IR Operation Status";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Operation Status";
break;
case MPI2_EVENT_SAS_DISCOVERY:
{
desc = "SAS Enclosure Device Status Change";
break;
case MPI2_EVENT_IR_VOLUME:
- desc = "IR Volume";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Volume";
break;
case MPI2_EVENT_IR_PHYSICAL_DISK:
- desc = "IR Physical Disk";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Physical Disk";
break;
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
- desc = "IR Configuration Change List";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Configuration Change List";
break;
case MPI2_EVENT_LOG_ENTRY_ADDED:
- desc = "Log Entry Added";
+ if (!ioc->hide_ir_msg)
+ desc = "Log Entry Added";
break;
case MPI2_EVENT_TEMP_THRESHOLD:
desc = "Temperature Threshold";
pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
}
-#endif
/**
* _base_sas_log_info - verbose translation of firmware log info
originator_str = "PL";
break;
case 2:
- originator_str = "IR";
+ if (!ioc->hide_ir_msg)
+ originator_str = "IR";
+ else
+ originator_str = "WarpDrive";
break;
}
return;
}
ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
(ioc->logging_level & MPT_DEBUG_REPLY)) {
_base_sas_ioc_info(ioc , mpi_reply,
mpt3sas_base_get_msg_frame(ioc, smid));
}
-#endif
+
if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
_base_sas_log_info(ioc, loginfo);
return 1;
if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
return 1;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
_base_display_event_data(ioc, mpi_reply);
-#endif
+
if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
goto out;
smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
}
wmb();
+ if (ioc->is_warpdrive) {
+ writel(reply_q->reply_post_host_index,
+ ioc->reply_post_host_index[msix_index]);
+ atomic_dec(&reply_q->busy);
+ return IRQ_HANDLED;
+ }
/* Update Reply Post Host Index.
* For those HBA's which support combined reply queue feature
_base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1);
}
+/**
+ * _base_build_sg_scmd - main sg creation routine
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Returns 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd, u16 smid)
+{
+ Mpi2SCSIIORequest_t *mpi_request;
+ dma_addr_t chain_dma;
+ struct scatterlist *sg_scmd;
+ void *sg_local, *chain;
+ u32 chain_offset;
+ u32 chain_length;
+ u32 chain_flags;
+ int sges_left;
+ u32 sges_in_segment;
+ u32 sgl_flags;
+ u32 sgl_flags_last_element;
+ u32 sgl_flags_end_buffer;
+ struct chain_tracker *chain_req;
+
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+ /* init scatter gather flags */
+ sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
+ sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
+ << MPI2_SGE_FLAGS_SHIFT;
+ sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
+ << MPI2_SGE_FLAGS_SHIFT;
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ if (sges_left < 0) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "pci_map_sg failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return -ENOMEM;
+ }
+
+ sg_local = &mpi_request->SGL;
+ sges_in_segment = ioc->max_sges_in_main_message;
+ if (sges_left <= sges_in_segment)
+ goto fill_in_last_segment;
+
+ mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
+ (sges_in_segment * ioc->sge_size))/4;
+
+ /* fill in main message segment when there is a chain following */
+ while (sges_in_segment) {
+ if (sges_in_segment == 1)
+ ioc->base_add_sg_single(sg_local,
+ sgl_flags_last_element | sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ /* initializing the chain flags and pointers */
+ chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
+ chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ do {
+ sges_in_segment = (sges_left <=
+ ioc->max_sges_in_chain_message) ? sges_left :
+ ioc->max_sges_in_chain_message;
+ chain_offset = (sges_left == sges_in_segment) ?
+ 0 : (sges_in_segment * ioc->sge_size)/4;
+ chain_length = sges_in_segment * ioc->sge_size;
+ if (chain_offset) {
+ chain_offset = chain_offset <<
+ MPI2_SGE_CHAIN_OFFSET_SHIFT;
+ chain_length += ioc->sge_size;
+ }
+ ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
+ chain_length, chain_dma);
+ sg_local = chain;
+ if (!chain_offset)
+ goto fill_in_last_segment;
+
+ /* fill in chain segments */
+ while (sges_in_segment) {
+ if (sges_in_segment == 1)
+ ioc->base_add_sg_single(sg_local,
+ sgl_flags_last_element |
+ sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ } while (1);
+
+
+ fill_in_last_segment:
+
+ /* fill the last segment */
+ while (sges_left) {
+ if (sges_left == 1)
+ ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ }
+
+ return 0;
+}
+
/**
* _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
* @ioc: per adapter object
int base;
u16 message_control;
+ /* Check whether controller SAS2008 B0 controller,
+ * if it is SAS2008 B0 controller use IO-APIC instead of MSIX
+ */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+ ioc->pdev->revision == SAS2_PCI_DEVICE_B0_REVISION) {
+ return -EINVAL;
+ }
+
base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
if (!base) {
dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n",
}
/* get msix vector count */
-
- pci_read_config_word(ioc->pdev, base + 2, &message_control);
- ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+ /* NUMA_IO not supported for older controllers */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
+ ioc->msix_vector_count = 1;
+ else {
+ pci_read_config_word(ioc->pdev, base + 2, &message_control);
+ ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+ }
dinitprintk(ioc, pr_info(MPT3SAS_FMT
"msix is supported, vector_count(%d)\n",
ioc->name, ioc->msix_vector_count));
atomic_set(&reply_q->busy, 0);
if (ioc->msix_enable)
snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
- MPT3SAS_DRIVER_NAME, ioc->id, index);
+ ioc->driver_name, ioc->id, index);
else
snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
- MPT3SAS_DRIVER_NAME, ioc->id);
+ ioc->driver_name, ioc->id);
r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
reply_q);
if (r) {
if (pci_request_selected_regions(pdev, ioc->bars,
- MPT3SAS_DRIVER_NAME)) {
+ ioc->driver_name)) {
pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
ioc->name);
ioc->bars = 0;
}
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].scmd = NULL;
+ ioc->scsi_lookup[i].direct_io = 0;
list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
}
/**
- * _base_display_intel_branding - Display branding string
+ * _base_display_OEMs_branding - Display branding string
* @ioc: per adapter object
*
* Return nothing.
*/
static void
-_base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc)
+_base_display_OEMs_branding(struct MPT3SAS_ADAPTER *ioc)
{
if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
return;
- switch (ioc->pdev->device) {
- case MPI25_MFGPAGE_DEVID_SAS3008:
- switch (ioc->pdev->subsystem_device) {
- case MPT3SAS_INTEL_RMS3JC080_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_INTEL_RMS3JC080_BRANDING);
- break;
-
- case MPT3SAS_INTEL_RS3GC008_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_INTEL_RS3GC008_BRANDING);
- break;
- case MPT3SAS_INTEL_RS3FC044_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_INTEL_RS3FC044_BRANDING);
- break;
- case MPT3SAS_INTEL_RS3UC080_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_INTEL_RS3UC080_BRANDING);
+ switch (ioc->pdev->subsystem_vendor) {
+ case PCI_VENDOR_ID_INTEL:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_INTEL_RMS2LL080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS2LL080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS2LL040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS2LL040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_SSD910_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_SSD910_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI2_MFGPAGE_DEVID_SAS2308_2:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_INTEL_RS25GB008_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RS25GB008_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25JB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25JB080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25JB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25JB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25KB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25KB080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25KB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25KB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB080_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_INTEL_RMS3JC080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RMS3JC080_BRANDING);
+ break;
+
+ case MPT3SAS_INTEL_RS3GC008_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3GC008_BRANDING);
+ break;
+ case MPT3SAS_INTEL_RS3FC044_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3FC044_BRANDING);
+ break;
+ case MPT3SAS_INTEL_RS3UC080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3UC080_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
break;
default:
pr_info(MPT3SAS_FMT
- "Intel(R) Controller: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
break;
}
break;
- default:
- pr_info(MPT3SAS_FMT
- "Intel(R) Controller: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
- break;
- }
-}
-
-
-
-/**
- * _base_display_dell_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_dell_branding(struct MPT3SAS_ADAPTER *ioc)
-{
- if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
- return;
-
- switch (ioc->pdev->device) {
- case MPI25_MFGPAGE_DEVID_SAS3008:
- switch (ioc->pdev->subsystem_device) {
- case MPT3SAS_DELL_12G_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_DELL_12G_HBA_BRANDING);
+ case PCI_VENDOR_ID_DELL:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_BRANDING);
+ break;
+ case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_6GBPS_SAS_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Dell 6Gbps HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_DELL_12G_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_DELL_12G_HBA_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Dell 12Gbps HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
break;
default:
pr_info(MPT3SAS_FMT
- "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
+ "Dell HBA: Subsystem ID: 0x%X\n", ioc->name,
ioc->pdev->subsystem_device);
break;
}
break;
- default:
- pr_info(MPT3SAS_FMT
- "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
- ioc->pdev->subsystem_device);
- break;
- }
-}
-
-/**
- * _base_display_cisco_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_cisco_branding(struct MPT3SAS_ADAPTER *ioc)
-{
- if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_CISCO)
- return;
-
- switch (ioc->pdev->device) {
- case MPI25_MFGPAGE_DEVID_SAS3008:
- switch (ioc->pdev->subsystem_device) {
- case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
- break;
- case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+ case PCI_VENDOR_ID_CISCO:
+ switch (ioc->pdev->device) {
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
break;
- case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ case MPI25_MFGPAGE_DEVID_SAS3108_1:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING
+ );
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
break;
default:
pr_info(MPT3SAS_FMT
- "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
+ "Cisco SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
break;
}
break;
- case MPI25_MFGPAGE_DEVID_SAS3108_1:
- switch (ioc->pdev->subsystem_device) {
- case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
- break;
- case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING);
- break;
+ case MPT2SAS_HP_3PAR_SSVID:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2004:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI2_MFGPAGE_DEVID_SAS2308_2:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_HP_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_2_4_INTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_2_4_EXTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_2_4_EXTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
default:
pr_info(MPT3SAS_FMT
- "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
+ "HP SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
break;
}
- break;
default:
- pr_info(MPT3SAS_FMT
- "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
break;
}
}
(bios_version & 0x0000FF00) >> 8,
bios_version & 0x000000FF);
- _base_display_intel_branding(ioc);
- _base_display_dell_branding(ioc);
- _base_display_cisco_branding(ioc);
+ _base_display_OEMs_branding(ioc);
pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
pr_info("), ");
pr_info("Capabilities=(");
- if (ioc->facts.IOCCapabilities &
+ if (!ioc->hide_ir_msg) {
+ if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
pr_info("Raid");
i++;
+ }
}
if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
/* command line tunables for max sgl entries */
if (max_sgl_entries != -1)
sg_tablesize = max_sgl_entries;
- else
- sg_tablesize = MPT3SAS_SG_DEPTH;
+ else {
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+ sg_tablesize = MPT2SAS_SG_DEPTH;
+ else
+ sg_tablesize = MPT3SAS_SG_DEPTH;
+ }
- if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
- sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
- else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) {
+ if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS)
+ sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+ else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
sg_tablesize = min_t(unsigned short, sg_tablesize,
SCSI_MAX_SG_CHAIN_SEGMENTS);
pr_warn(MPT3SAS_FMT
"sg_tablesize(%u) is bigger than kernel"
" defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
- sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS);
+ sg_tablesize, MPT_MAX_PHYS_SEGMENTS);
}
ioc->shost->sg_tablesize = sg_tablesize;
mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
mpi_request.VF_ID = 0; /* TODO */
mpi_request.VP_ID = 0;
- mpi_request.MsgVersion = cpu_to_le16(MPI25_VERSION);
+ mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged);
mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
if (_base_is_controller_msix_enabled(ioc))
u32 reply_address;
u16 smid;
struct _tr_list *delayed_tr, *delayed_tr_next;
+ u8 hide_flag;
struct adapter_reply_queue *reply_q;
long reply_post_free;
u32 reply_post_free_sz, index = 0;
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].smid = smid;
ioc->scsi_lookup[i].scmd = NULL;
+ ioc->scsi_lookup[i].direct_io = 0;
list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
}
if (ioc->is_driver_loading) {
+
+ if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
+ == 0x80) {
+ hide_flag = (u8) (
+ le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
+ MFG_PAGE10_HIDE_SSDS_MASK);
+ if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
+ ioc->mfg_pg10_hide_flag = hide_flag;
+ }
+
ioc->wait_for_discovery_to_complete =
_base_determine_wait_on_discovery(ioc);
dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
__func__));
+ /* synchronizing freeing resource with pci_access_mutex lock */
+ mutex_lock(&ioc->pci_access_mutex);
if (ioc->chip_phys && ioc->chip) {
_base_mask_interrupts(ioc);
ioc->shost_recovery = 1;
}
mpt3sas_base_unmap_resources(ioc);
+ mutex_unlock(&ioc->pci_access_mutex);
return;
}
{
int r, i;
int cpu_id, last_cpu_id = 0;
- u8 revision;
dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
__func__));
goto out_free_resources;
}
- /* Check whether the controller revision is C0 or above.
- * only C0 and above revision controllers support 96 MSI-X vectors.
- */
- revision = ioc->pdev->revision;
-
- if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
- (revision >= 0x02))
- ioc->msix96_vector = 1;
+ if (ioc->is_warpdrive) {
+ ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
+ sizeof(resource_size_t *), GFP_KERNEL);
+ if (!ioc->reply_post_host_index) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT "allocation "
+ "for cpu_msix_table failed!!!\n", ioc->name));
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+ }
ioc->rdpq_array_enable_assigned = 0;
ioc->dma_mask = 0;
if (r)
goto out_free_resources;
+ if (ioc->is_warpdrive) {
+ ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
+ &ioc->chip->ReplyPostHostIndex;
+
+ for (i = 1; i < ioc->cpu_msix_table_sz; i++)
+ ioc->reply_post_host_index[i] =
+ (resource_size_t __iomem *)
+ ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
+ * 4)));
+ }
pci_set_drvdata(ioc->pdev, ioc->shost);
r = _base_get_ioc_facts(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
- /*
- * In SAS3.0,
- * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
- * Target Status - all require the IEEE formated scatter gather
- * elements.
- */
-
- ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
- ioc->build_sg = &_base_build_sg_ieee;
- ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
- ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+ switch (ioc->hba_mpi_version_belonged) {
+ case MPI2_VERSION:
+ ioc->build_sg_scmd = &_base_build_sg_scmd;
+ ioc->build_sg = &_base_build_sg;
+ ioc->build_zero_len_sge = &_base_build_zero_len_sge;
+ break;
+ case MPI25_VERSION:
+ /*
+ * In SAS3.0,
+ * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
+ * Target Status - all require the IEEE formated scatter gather
+ * elements.
+ */
+ ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
+ ioc->build_sg = &_base_build_sg_ieee;
+ ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
+ ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+ break;
+ }
/*
* These function pointers for other requests that don't
if (r)
goto out_free_resources;
+ ioc->non_operational_loop = 0;
return 0;
out_free_resources:
_base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->cpu_msix_table);
+ if (ioc->is_warpdrive)
+ kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles);
kfree(ioc->blocking_handles);
kfree(ioc->tm_cmds.reply);
_base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->cpu_msix_table);
+ if (ioc->is_warpdrive)
+ kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles);
kfree(ioc->blocking_handles);
kfree(ioc->pfacts);
#include <scsi/scsi_transport_sas.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
#include "mpt3sas_debug.h"
#include "mpt3sas_trigger_diag.h"
#define MPT3SAS_DRIVER_NAME "mpt3sas"
#define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
#define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION "09.100.00.00"
+#define MPT3SAS_DRIVER_VERSION "09.102.00.00"
#define MPT3SAS_MAJOR_VERSION 9
-#define MPT3SAS_MINOR_VERSION 100
+#define MPT3SAS_MINOR_VERSION 102
#define MPT3SAS_BUILD_VERSION 0
#define MPT3SAS_RELEASE_VERSION 00
+#define MPT2SAS_DRIVER_NAME "mpt2sas"
+#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
+#define MPT2SAS_DRIVER_VERSION "20.102.00.00"
+#define MPT2SAS_MAJOR_VERSION 20
+#define MPT2SAS_MINOR_VERSION 102
+#define MPT2SAS_BUILD_VERSION 0
+#define MPT2SAS_RELEASE_VERSION 00
+
/*
* Set MPT3SAS_SG_DEPTH value based on user input.
*/
-#define MPT3SAS_MAX_PHYS_SEGMENTS SCSI_MAX_SG_SEGMENTS
-#define MPT3SAS_MIN_PHYS_SEGMENTS 16
+#define MPT_MAX_PHYS_SEGMENTS SCSI_MAX_SG_SEGMENTS
+#define MPT_MIN_PHYS_SEGMENTS 16
+
#ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
#define MPT3SAS_SG_DEPTH CONFIG_SCSI_MPT3SAS_MAX_SGE
#else
-#define MPT3SAS_SG_DEPTH MPT3SAS_MAX_PHYS_SEGMENTS
+#define MPT3SAS_SG_DEPTH MPT_MAX_PHYS_SEGMENTS
#endif
+#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
+#define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE
+#else
+#define MPT2SAS_SG_DEPTH MPT_MAX_PHYS_SEGMENTS
+#endif
/*
* Generic Defines
*/
#define MPT3SAS_FMT "%s: "
+/*
+ * WarpDrive Specific Log codes
+ */
+
+#define MPT2_WARPDRIVE_LOGENTRY (0x8002)
+#define MPT2_WARPDRIVE_LC_SSDT (0x41)
+#define MPT2_WARPDRIVE_LC_SSDLW (0x43)
+#define MPT2_WARPDRIVE_LC_SSDLF (0x44)
+#define MPT2_WARPDRIVE_LC_BRMF (0x4D)
+
/*
* per target private data
*/
#define MPT_TARGET_FLAGS_DELETED 0x04
#define MPT_TARGET_FASTPATH_IO 0x08
+#define SAS2_PCI_DEVICE_B0_REVISION (0x01)
+#define SAS3_PCI_DEVICE_C0_REVISION (0x02)
+
/*
* Intel HBA branding
*/
+#define MPT2SAS_INTEL_RMS25JB080_BRANDING \
+ "Intel(R) Integrated RAID Module RMS25JB080"
+#define MPT2SAS_INTEL_RMS25JB040_BRANDING \
+ "Intel(R) Integrated RAID Module RMS25JB040"
+#define MPT2SAS_INTEL_RMS25KB080_BRANDING \
+ "Intel(R) Integrated RAID Module RMS25KB080"
+#define MPT2SAS_INTEL_RMS25KB040_BRANDING \
+ "Intel(R) Integrated RAID Module RMS25KB040"
+#define MPT2SAS_INTEL_RMS25LB040_BRANDING \
+ "Intel(R) Integrated RAID Module RMS25LB040"
+#define MPT2SAS_INTEL_RMS25LB080_BRANDING \
+ "Intel(R) Integrated RAID Module RMS25LB080"
+#define MPT2SAS_INTEL_RMS2LL080_BRANDING \
+ "Intel Integrated RAID Module RMS2LL080"
+#define MPT2SAS_INTEL_RMS2LL040_BRANDING \
+ "Intel Integrated RAID Module RMS2LL040"
+#define MPT2SAS_INTEL_RS25GB008_BRANDING \
+ "Intel(R) RAID Controller RS25GB008"
+#define MPT2SAS_INTEL_SSD910_BRANDING \
+ "Intel(R) SSD 910 Series"
+
#define MPT3SAS_INTEL_RMS3JC080_BRANDING \
"Intel(R) Integrated RAID Module RMS3JC080"
#define MPT3SAS_INTEL_RS3GC008_BRANDING \
/*
* Intel HBA SSDIDs
*/
-#define MPT3SAS_INTEL_RMS3JC080_SSDID 0x3521
-#define MPT3SAS_INTEL_RS3GC008_SSDID 0x3522
-#define MPT3SAS_INTEL_RS3FC044_SSDID 0x3523
-#define MPT3SAS_INTEL_RS3UC080_SSDID 0x3524
+#define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516
+#define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517
+#define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518
+#define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519
+#define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A
+#define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B
+#define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E
+#define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F
+#define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000
+#define MPT2SAS_INTEL_SSD910_SSDID 0x3700
+
+#define MPT3SAS_INTEL_RMS3JC080_SSDID 0x3521
+#define MPT3SAS_INTEL_RS3GC008_SSDID 0x3522
+#define MPT3SAS_INTEL_RS3FC044_SSDID 0x3523
+#define MPT3SAS_INTEL_RS3UC080_SSDID 0x3524
/*
* Dell HBA branding
*/
+#define MPT2SAS_DELL_BRANDING_SIZE 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
+
#define MPT3SAS_DELL_12G_HBA_BRANDING \
"Dell 12Gbps HBA"
/*
* Dell HBA SSDIDs
*/
-#define MPT3SAS_DELL_12G_HBA_SSDID 0x1F46
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
+
+#define MPT3SAS_DELL_12G_HBA_SSDID 0x1F46
/*
* Cisco HBA branding
*/
#define MPT3SAS_CISCO_12G_8E_HBA_BRANDING \
- "Cisco 9300-8E 12G SAS HBA"
+ "Cisco 9300-8E 12G SAS HBA"
#define MPT3SAS_CISCO_12G_8I_HBA_BRANDING \
- "Cisco 9300-8i 12G SAS HBA"
+ "Cisco 9300-8i 12G SAS HBA"
#define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING \
- "Cisco 12G Modular SAS Pass through Controller"
+ "Cisco 12G Modular SAS Pass through Controller"
#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING \
- "UCS C3X60 12G SAS Pass through Controller"
+ "UCS C3X60 12G SAS Pass through Controller"
/*
* Cisco HBA SSSDIDs
*/
#define MPT3_DIAG_BUFFER_IS_RELEASED (0x02)
#define MPT3_DIAG_BUFFER_IS_DIAG_RESET (0x04)
+/*
+ * HP HBA branding
+ */
+#define MPT2SAS_HP_3PAR_SSVID 0x1590
+
+#define MPT2SAS_HP_2_4_INTERNAL_BRANDING \
+ "HP H220 Host Bus Adapter"
+#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING \
+ "HP H221 Host Bus Adapter"
+#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING \
+ "HP H222 Host Bus Adapter"
+#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING \
+ "HP H220i Host Bus Adapter"
+#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING \
+ "HP H210i Host Bus Adapter"
+
+/*
+ * HO HBA SSDIDs
+ */
+#define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041
+#define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042
+#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043
+#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044
+#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046
+
/*
* Combined Reply Queue constants,
* There are twelve Supplemental Reply Post Host Index Registers
* struct MPT3SAS_TARGET - starget private hostdata
* @starget: starget object
* @sas_address: target sas address
+ * @raid_device: raid_device pointer to access volume data
* @handle: device handle
* @num_luns: number luns
* @flags: MPT_TARGET_FLAGS_XXX flags
* @deleted: target flaged for deletion
* @tm_busy: target is busy with TM request.
+ * @sdev: The sas_device associated with this target
*/
struct MPT3SAS_TARGET {
struct scsi_target *starget;
u64 sas_address;
+ struct _raid_device *raid_device;
u16 handle;
int num_luns;
u32 flags;
u8 deleted;
u8 tm_busy;
+ struct _sas_device *sdev;
};
#define MPT_DEVICE_FLAGS_INIT 0x01
#define MPT_DEVICE_TLR_ON 0x02
+#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003)
+#define MFG_PAGE10_HIDE_ALL_DISKS (0x00)
+#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01)
+#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02)
+
/**
* struct MPT3SAS_DEVICE - sdev private hostdata
* @sas_target: starget private hostdata
u8 pend_sas_rphy_add;
u8 enclosure_level;
u8 connector_name[4];
+ struct kref refcount;
};
+static inline void sas_device_get(struct _sas_device *s)
+{
+ kref_get(&s->refcount);
+}
+
+static inline void sas_device_free(struct kref *r)
+{
+ kfree(container_of(r, struct _sas_device, refcount));
+}
+
+static inline void sas_device_put(struct _sas_device *s)
+{
+ kref_put(&s->refcount, sas_device_free);
+}
+
/**
* struct _raid_device - raid volume link list
* @list: sas device list
* @sdev: scsi device struct (volumes are single lun)
* @wwid: unique identifier for the volume
* @handle: device handle
+ * @block_size: Block size of the volume
* @id: target id
* @channel: target channel
* @volume_type: the raid level
* @num_pds: number of hidden raid components
* @responding: used in _scsih_raid_device_mark_responding
* @percent_complete: resync percent complete
+ * @direct_io_enabled: Whether direct io to PDs are allowed or not
+ * @stripe_exponent: X where 2powX is the stripe sz in blocks
+ * @block_exponent: X where 2powX is the block sz in bytes
+ * @max_lba: Maximum number of LBA in the volume
+ * @stripe_sz: Stripe Size of the volume
+ * @device_info: Device info of the volume member disk
+ * @pd_handle: Array of handles of the physical drives for direct I/O in le16
*/
#define MPT_MAX_WARPDRIVE_PDS 8
struct _raid_device {
struct scsi_device *sdev;
u64 wwid;
u16 handle;
+ u16 block_sz;
int id;
int channel;
u8 volume_type;
u8 num_pds;
u8 responding;
u8 percent_complete;
+ u8 direct_io_enabled;
+ u8 stripe_exponent;
+ u8 block_exponent;
+ u64 max_lba;
+ u32 stripe_sz;
u32 device_info;
+ u16 pd_handle[MPT_MAX_WARPDRIVE_PDS];
};
/**
* @smid: system message id
* @scmd: scsi request pointer
* @cb_idx: callback index
+ * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
* @tracker_list: list of free request (ioc->free_list)
*/
struct scsiio_tracker {
u16 smid;
struct scsi_cmnd *scmd;
u8 cb_idx;
+ u8 direct_io;
struct list_head chain_list;
struct list_head tracker_list;
};
* @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
* @delayed_tr_list: target reset link list
* @delayed_tr_volume_list: volume target reset link list
- * @@temp_sensors_count: flag to carry the number of temperature sensors
+ * @temp_sensors_count: flag to carry the number of temperature sensors
+ * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and
+ * pci resource handling. PCI resource freeing will lead to free
+ * vital hardware/memory resource, which might be in use by cli/sysfs
+ * path functions resulting in Null pointer reference followed by kernel
+ * crash. To avoid the above race condition we use mutex syncrhonization
+ * which ensures the syncrhonization between cli/sysfs_show path.
*/
struct MPT3SAS_ADAPTER {
struct list_head list;
u8 id;
int cpu_count;
char name[MPT_NAME_LENGTH];
+ char driver_name[MPT_NAME_LENGTH];
char tmp_string[MPT_STRING_LENGTH];
struct pci_dev *pdev;
Mpi2SystemInterfaceRegs_t __iomem *chip;
u16 msix_vector_count;
u8 *cpu_msix_table;
u16 cpu_msix_table_sz;
+ resource_size_t __iomem **reply_post_host_index;
u32 ioc_reset_count;
MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
+ u32 non_operational_loop;
/* internal commands, callback index */
u8 scsi_io_cb_idx;
MPT_BUILD_SG build_sg;
MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge;
u16 sge_size_ieee;
+ u16 hba_mpi_version_belonged;
/* function ptr for MPI sg elements only */
MPT_BUILD_SG build_sg_mpi;
struct list_head delayed_tr_list;
struct list_head delayed_tr_volume_list;
u8 temp_sensors_count;
+ struct mutex pci_access_mutex;
/* diag buffer support */
u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
u32 ring_buffer_offset;
u32 ring_buffer_sz;
+ u8 is_warpdrive;
+ u8 hide_ir_msg;
+ u8 mfg_pg10_hide_flag;
+ u8 hide_drives;
spinlock_t diag_trigger_lock;
u8 diag_trigger_active;
struct SL_WH_MASTER_TRIGGER_T diag_trigger_master;
/* base shared API */
extern struct list_head mpt3sas_ioc_list;
+extern char driver_name[MPT_NAME_LENGTH];
+/* spinlock on list operations over IOCs
+ * Case: when multiple warpdrive cards(IOCs) are in use
+ * Each IOC will added to the ioc list structure on initialization.
+ * Watchdog threads run at regular intervals to check IOC for any
+ * fault conditions which will trigger the dead_ioc thread to
+ * deallocate pci resource, resulting deleting the IOC netry from list,
+ * this deletion need to protected by spinlock to enusre that
+ * ioc removal is syncrhonized, if not synchronized it might lead to
+ * list_del corruption as the ioc list is traversed in cli path.
+ */
+extern spinlock_t gioc_lock;
+
void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc);
void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc);
struct MPT3SAS_ADAPTER *ioc, u16 handle);
struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address(
struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
-struct _sas_device *mpt3sas_scsih_sas_device_find_by_sas_address(
- struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+struct _sas_device *mpt3sas_get_sdev_by_addr(
+ struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+struct _sas_device *__mpt3sas_get_sdev_by_addr(
+ struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle);
/* config shared API */
u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u16 sz);
int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
/* ctl shared API */
extern struct device_attribute *mpt3sas_host_attrs[];
extern struct device_attribute *mpt3sas_dev_attrs[];
-void mpt3sas_ctl_init(void);
-void mpt3sas_ctl_exit(void);
+void mpt3sas_ctl_init(ushort hbas_to_enumerate);
+void mpt3sas_ctl_exit(ushort hbas_to_enumerate);
u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply);
void mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase);
u8 *issue_reset);
/* transport shared API */
+extern struct scsi_transport_template *mpt3sas_transport_template;
u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply);
struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc,
u8 asc, u8 ascq);
void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status,
u32 loginfo);
+
+/* warpdrive APIs */
+u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+ struct _raid_device *raid_device);
+u8
+mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void
+mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+ struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ u16 smid);
+
#endif /* MPT3SAS_BASE_H_INCLUDED */
dma_addr_t page_dma;
};
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _config_display_some_debug - debug routine
* @ioc: per adapter object
ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
}
-#endif
/**
* _config_alloc_config_dma_memory - obtain physical memory
mpi_reply->MsgLength*4);
}
ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
-#endif
ioc->config_cmds.smid = USHRT_MAX;
complete(&ioc->config_cmds.done);
return 1;
config_request = mpt3sas_base_get_msg_frame(ioc, smid);
ioc->config_cmds.smid = smid;
memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_config_display_some_debug(ioc, smid, "config_request", NULL);
-#endif
init_completion(&ioc->config_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
return r;
}
+/**
+ * mpt3sas_config_get_iounit_pg3 - obtain iounit page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+ mpi_request.Header.PageNumber = 3;
+ mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+ return r;
+}
+
/**
* mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
* @ioc: per adapter object
BLOCKING,
};
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _ctl_sas_device_find_by_handle - sas device search
* @ioc: per adapter object
}
}
-#endif
-
/**
* mpt3sas_ctl_done - ctl module completion routine
* @ioc: per adapter object
}
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
-#endif
ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
complete(&ioc->ctl_cmds.done);
return 1;
* _ctl_verify_adapter - validates ioc_number passed from application
* @ioc: per adapter object
* @iocpp: The ioc pointer is returned in this.
+ * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
+ * MPI25_VERSION for mpt3ctl ioctl device.
*
* Return (-1) means error, else ioc_number.
*/
static int
-_ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp)
+_ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp,
+ int mpi_version)
{
struct MPT3SAS_ADAPTER *ioc;
-
+ /* global ioc lock to protect controller on list operations */
+ spin_lock(&gioc_lock);
list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
if (ioc->id != ioc_number)
continue;
+ /* Check whether this ioctl command is from right
+ * ioctl device or not, if not continue the search.
+ */
+ if (ioc->hba_mpi_version_belonged != mpi_version)
+ continue;
+ spin_unlock(&gioc_lock);
*iocpp = ioc;
return ioc_number;
}
+ spin_unlock(&gioc_lock);
*iocpp = NULL;
return -1;
}
*
* Called when application request fasyn callback handler.
*/
-static int
+int
_ctl_fasync(int fd, struct file *filep, int mode)
{
return fasync_helper(fd, filep, mode, &async_queue);
* @wait -
*
*/
-static unsigned int
+unsigned int
_ctl_poll(struct file *filep, poll_table *wait)
{
struct MPT3SAS_ADAPTER *ioc;
poll_wait(filep, &ctl_poll_wait, wait);
+ /* global ioc lock to protect controller on list operations */
+ spin_lock(&gioc_lock);
list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
- if (ioc->aen_event_read_flag)
+ if (ioc->aen_event_read_flag) {
+ spin_unlock(&gioc_lock);
return POLLIN | POLLRDNORM;
+ }
}
+ spin_unlock(&gioc_lock);
return 0;
}
psge = (void *)request + (karg.data_sge_offset*4);
/* send command to firmware */
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
-#endif
init_completion(&ioc->ctl_cmds.done);
switch (mpi_request->Function) {
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
(ioc->logging_level & MPT_DEBUG_TM)) {
Mpi2SCSITaskManagementReply_t *tm_reply =
le32_to_cpu(tm_reply->IOCLogInfo),
le32_to_cpu(tm_reply->TerminationCount));
}
-#endif
+
/* copy out xdata to user */
if (data_in_sz) {
if (copy_to_user(karg.data_in_buf_ptr, data_in,
__func__));
memset(&karg, 0 , sizeof(karg));
- karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
if (ioc->pfacts)
karg.port_number = ioc->pfacts[0].PortNumber;
karg.hw_rev = ioc->pdev->revision;
karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
karg.firmware_version = ioc->facts.FWVersion.Word;
- strcpy(karg.driver_version, MPT3SAS_DRIVER_NAME);
+ strcpy(karg.driver_version, ioc->driver_name);
strcat(karg.driver_version, "-");
- strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
+ switch (ioc->hba_mpi_version_belonged) {
+ case MPI2_VERSION:
+ if (ioc->is_warpdrive)
+ karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
+ else
+ karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
+ strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
+ break;
+ case MPI25_VERSION:
+ karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
+ strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
+ break;
+ }
karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
if (copy_to_user(arg, &karg, sizeof(karg))) {
* _ctl_ioctl_main - main ioctl entry point
* @file - (struct file)
* @cmd - ioctl opcode
- * @arg -
- * compat - handles 32 bit applications in 64bit os
+ * @arg - user space data buffer
+ * @compat - handles 32 bit applications in 64bit os
+ * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
+ * MPI25_VERSION for mpt3ctl ioctl device.
*/
static long
_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
- u8 compat)
+ u8 compat, u16 mpi_version)
{
struct MPT3SAS_ADAPTER *ioc;
struct mpt3_ioctl_header ioctl_header;
return -EFAULT;
}
- if (_ctl_verify_adapter(ioctl_header.ioc_number, &ioc) == -1 || !ioc)
+ if (_ctl_verify_adapter(ioctl_header.ioc_number,
+ &ioc, mpi_version) == -1 || !ioc)
return -ENODEV;
+ /* pci_access_mutex lock acquired by ioctl path */
+ mutex_lock(&ioc->pci_access_mutex);
+
if (ioc->shost_recovery || ioc->pci_error_recovery ||
- ioc->is_driver_loading)
- return -EAGAIN;
+ ioc->is_driver_loading || ioc->remove_host) {
+ ret = -EAGAIN;
+ goto out_unlock_pciaccess;
+ }
state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
if (state == NON_BLOCKING) {
- if (!mutex_trylock(&ioc->ctl_cmds.mutex))
- return -EAGAIN;
- } else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
- return -ERESTARTSYS;
+ if (!mutex_trylock(&ioc->ctl_cmds.mutex)) {
+ ret = -EAGAIN;
+ goto out_unlock_pciaccess;
+ }
+ } else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) {
+ ret = -ERESTARTSYS;
+ goto out_unlock_pciaccess;
+ }
switch (cmd) {
}
mutex_unlock(&ioc->ctl_cmds.mutex);
+out_unlock_pciaccess:
+ mutex_unlock(&ioc->pci_access_mutex);
return ret;
}
/**
- * _ctl_ioctl - main ioctl entry point (unlocked)
+ * _ctl_ioctl - mpt3ctl main ioctl entry point (unlocked)
* @file - (struct file)
* @cmd - ioctl opcode
* @arg -
*/
-static long
+long
_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
- ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0);
+ /* pass MPI25_VERSION value, to indicate that this ioctl cmd
+ * came from mpt3ctl ioctl device.
+ */
+ ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI25_VERSION);
return ret;
}
+/**
+ * _ctl_mpt2_ioctl - mpt2ctl main ioctl entry point (unlocked)
+ * @file - (struct file)
+ * @cmd - ioctl opcode
+ * @arg -
+ */
+long
+_ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ long ret;
+
+ /* pass MPI2_VERSION value, to indicate that this ioctl cmd
+ * came from mpt2ctl ioctl device.
+ */
+ ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI2_VERSION);
+ return ret;
+}
#ifdef CONFIG_COMPAT
/**
- * _ctl_ioctl_compat - main ioctl entry point (compat)
+ *_ ctl_ioctl_compat - main ioctl entry point (compat)
* @file -
* @cmd -
* @arg -
*
* This routine handles 32 bit applications in 64bit os.
*/
-static long
+long
_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
{
long ret;
- ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1);
+ ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI25_VERSION);
+ return ret;
+}
+
+/**
+ *_ ctl_mpt2_ioctl_compat - main ioctl entry point (compat)
+ * @file -
+ * @cmd -
+ * @arg -
+ *
+ * This routine handles 32 bit applications in 64bit os.
+ */
+long
+_ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
+{
+ long ret;
+
+ ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI2_VERSION);
return ret;
}
#endif
static DEVICE_ATTR(reply_queue_count, S_IRUGO, _ctl_ioc_reply_queue_count_show,
NULL);
+/**
+ * _ctl_BRM_status_show - Backup Rail Monitor Status
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is number of reply queues
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_BRM_status_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ Mpi2IOUnitPage3_t *io_unit_pg3 = NULL;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 backup_rail_monitor_status = 0;
+ u16 ioc_status;
+ int sz;
+ ssize_t rc = 0;
+
+ if (!ioc->is_warpdrive) {
+ pr_err(MPT3SAS_FMT "%s: BRM attribute is only for"
+ " warpdrive\n", ioc->name, __func__);
+ goto out;
+ }
+ /* pci_access_mutex lock acquired by sysfs show path */
+ mutex_lock(&ioc->pci_access_mutex);
+ if (ioc->pci_error_recovery || ioc->remove_host) {
+ mutex_unlock(&ioc->pci_access_mutex);
+ return 0;
+ }
+
+ /* allocate upto GPIOVal 36 entries */
+ sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36);
+ io_unit_pg3 = kzalloc(sz, GFP_KERNEL);
+ if (!io_unit_pg3) {
+ pr_err(MPT3SAS_FMT "%s: failed allocating memory "
+ "for iounit_pg3: (%d) bytes\n", ioc->name, __func__, sz);
+ goto out;
+ }
+
+ if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) !=
+ 0) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed reading iounit_pg3\n", ioc->name,
+ __func__);
+ goto out;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT "%s: iounit_pg3 failed with "
+ "ioc_status(0x%04x)\n", ioc->name, __func__, ioc_status);
+ goto out;
+ }
+
+ if (io_unit_pg3->GPIOCount < 25) {
+ pr_err(MPT3SAS_FMT "%s: iounit_pg3->GPIOCount less than "
+ "25 entries, detected (%d) entries\n", ioc->name, __func__,
+ io_unit_pg3->GPIOCount);
+ goto out;
+ }
+
+ /* BRM status is in bit zero of GPIOVal[24] */
+ backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
+ rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
+
+ out:
+ kfree(io_unit_pg3);
+ mutex_unlock(&ioc->pci_access_mutex);
+ return rc;
+}
+static DEVICE_ATTR(BRM_status, S_IRUGO, _ctl_BRM_status_show, NULL);
+
struct DIAG_BUFFER_START {
__le32 Size;
__le32 DiagVersion;
&dev_attr_diag_trigger_event,
&dev_attr_diag_trigger_scsi,
&dev_attr_diag_trigger_mpi,
+ &dev_attr_BRM_status,
NULL,
};
NULL,
};
+/* file operations table for mpt3ctl device */
static const struct file_operations ctl_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = _ctl_ioctl,
#endif
};
+/* file operations table for mpt2ctl device */
+static const struct file_operations ctl_gen2_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = _ctl_mpt2_ioctl,
+ .poll = _ctl_poll,
+ .fasync = _ctl_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = _ctl_mpt2_ioctl_compat,
+#endif
+};
+
static struct miscdevice ctl_dev = {
.minor = MPT3SAS_MINOR,
.name = MPT3SAS_DEV_NAME,
.fops = &ctl_fops,
};
+static struct miscdevice gen2_ctl_dev = {
+ .minor = MPT2SAS_MINOR,
+ .name = MPT2SAS_DEV_NAME,
+ .fops = &ctl_gen2_fops,
+};
+
/**
* mpt3sas_ctl_init - main entry point for ctl.
*
*/
void
-mpt3sas_ctl_init(void)
+mpt3sas_ctl_init(ushort hbas_to_enumerate)
{
async_queue = NULL;
- if (misc_register(&ctl_dev) < 0)
- pr_err("%s can't register misc device [minor=%d]\n",
- MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
+
+ /* Don't register mpt3ctl ioctl device if
+ * hbas_to_enumarate is one.
+ */
+ if (hbas_to_enumerate != 1)
+ if (misc_register(&ctl_dev) < 0)
+ pr_err("%s can't register misc device [minor=%d]\n",
+ MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
+
+ /* Don't register mpt3ctl ioctl device if
+ * hbas_to_enumarate is two.
+ */
+ if (hbas_to_enumerate != 2)
+ if (misc_register(&gen2_ctl_dev) < 0)
+ pr_err("%s can't register misc device [minor=%d]\n",
+ MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
init_waitqueue_head(&ctl_poll_wait);
}
*
*/
void
-mpt3sas_ctl_exit(void)
+mpt3sas_ctl_exit(ushort hbas_to_enumerate)
{
struct MPT3SAS_ADAPTER *ioc;
int i;
kfree(ioc->event_log);
}
- misc_deregister(&ctl_dev);
+ if (hbas_to_enumerate != 1)
+ misc_deregister(&ctl_dev);
+ if (hbas_to_enumerate != 2)
+ misc_deregister(&gen2_ctl_dev);
}
#include <linux/miscdevice.h>
#endif
-
+#ifndef MPT2SAS_MINOR
+#define MPT2SAS_MINOR (MPT_MINOR + 1)
+#endif
#ifndef MPT3SAS_MINOR
#define MPT3SAS_MINOR (MPT_MINOR + 2)
#endif
+#define MPT2SAS_DEV_NAME "mpt2ctl"
#define MPT3SAS_DEV_NAME "mpt3ctl"
#define MPT3_MAGIC_NUMBER 'L'
#define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
#define MPT2_IOCTL_INTERFACE_FC_IP (0x02)
#define MPT2_IOCTL_INTERFACE_SAS (0x03)
#define MPT2_IOCTL_INTERFACE_SAS2 (0x04)
+#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200 (0x05)
#define MPT3_IOCTL_INTERFACE_SAS3 (0x06)
#define MPT2_IOCTL_VERSION_LENGTH (32)
#define MPT_DEBUG_TRIGGER_DIAG 0x00200000
-/*
- * CONFIG_SCSI_MPT3SAS_LOGGING - enabled in Kconfig
- */
-
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
#define MPT_CHECK_LOGGING(IOC, CMD, BITS) \
{ \
if (IOC->logging_level & BITS) \
CMD; \
}
-#else
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)
-#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
-
/*
* debug macros
/* inline functions for dumping debug data*/
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
/**
* _debug_dump_mf - print message frame contents
* @mpi_request: pointer to message frame
}
pr_info("\n");
}
-#else
-#define _debug_dump_mf(mpi_request, sz)
-#define _debug_dump_reply(mpi_request, sz)
-#define _debug_dump_config(mpi_request, sz)
-#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
#endif /* MPT3SAS_DEBUG_H_INCLUDED */
#include <linux/interrupt.h>
#include <linux/aer.h>
#include <linux/raid_class.h>
+#include <asm/unaligned.h>
#include "mpt3sas_base.h"
-MODULE_AUTHOR(MPT3SAS_AUTHOR);
-MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
-
#define RAID_CHANNEL 1
/* forward proto's */
static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
-static void _scsih_scan_start(struct Scsi_Host *shost);
-static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
-
/* global parameters */
LIST_HEAD(mpt3sas_ioc_list);
+/* global ioc lock for list operations */
+DEFINE_SPINLOCK(gioc_lock);
+
+MODULE_AUTHOR(MPT3SAS_AUTHOR);
+MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
+MODULE_ALIAS("mpt2sas");
/* local parameters */
static u8 scsi_io_cb_idx = -1;
static u8 transport_cb_idx = -1;
static u8 scsih_cb_idx = -1;
static u8 config_cb_idx = -1;
-static int mpt_ids;
+static int mpt2_ids;
+static int mpt3_ids;
static u8 tm_tr_cb_idx = -1 ;
static u8 tm_tr_volume_cb_idx = -1 ;
module_param(max_lun, ullong, 0);
MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
-
-
+static ushort hbas_to_enumerate;
+module_param(hbas_to_enumerate, ushort, 0);
+MODULE_PARM_DESC(hbas_to_enumerate,
+ " 0 - enumerates both SAS 2.0 & SAS 3.0 generation HBAs\n \
+ 1 - enumerates only SAS 2.0 generation HBAs\n \
+ 2 - enumerates only SAS 3.0 generation HBAs (default=0)");
/* diag_buffer_enable is bitwise
* bit 0 set = TRACE
/* raid transport support */
-
-static struct raid_template *mpt3sas_raid_template;
+struct raid_template *mpt3sas_raid_template;
+struct raid_template *mpt2sas_raid_template;
/**
u8 VP_ID;
u8 ignore;
u16 event;
+ struct kref refcount;
char event_data[0] __aligned(4);
};
-/* raid transport support */
-static struct raid_template *mpt3sas_raid_template;
+static void fw_event_work_free(struct kref *r)
+{
+ kfree(container_of(r, struct fw_event_work, refcount));
+}
+
+static void fw_event_work_get(struct fw_event_work *fw_work)
+{
+ kref_get(&fw_work->refcount);
+}
+
+static void fw_event_work_put(struct fw_event_work *fw_work)
+{
+ kref_put(&fw_work->refcount, fw_event_work_free);
+}
+
+static struct fw_event_work *alloc_fw_event_work(int len)
+{
+ struct fw_event_work *fw_event;
+
+ fw_event = kzalloc(sizeof(*fw_event) + len, GFP_ATOMIC);
+ if (!fw_event)
+ return NULL;
+
+ kref_init(&fw_event->refcount);
+ return fw_event;
+}
/**
* struct _scsi_io_transfer - scsi io transfer
u32 transfer_length;
};
-/*
- * The pci device ids are defined in mpi/mpi2_cnfg.h.
- */
-static const struct pci_device_id scsih_pci_table[] = {
- /* Fury ~ 3004 and 3008 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Invader ~ 3108 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
- PCI_ANY_ID, PCI_ANY_ID },
- {0} /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, scsih_pci_table);
-
/**
* _scsih_set_debug_level - global setting of ioc->logging_level.
*
return ret;
pr_info("setting logging_level(0x%08x)\n", logging_level);
+ spin_lock(&gioc_lock);
list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
ioc->logging_level = logging_level;
+ spin_unlock(&gioc_lock);
return 0;
}
module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
}
}
+static struct _sas_device *
+__mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+ struct MPT3SAS_TARGET *tgt_priv)
+{
+ struct _sas_device *ret;
+
+ assert_spin_locked(&ioc->sas_device_lock);
+
+ ret = tgt_priv->sdev;
+ if (ret)
+ sas_device_get(ret);
+
+ return ret;
+}
+
+static struct _sas_device *
+mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+ struct MPT3SAS_TARGET *tgt_priv)
+{
+ struct _sas_device *ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ ret = __mpt3sas_get_sdev_from_target(ioc, tgt_priv);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ return ret;
+}
+
+
+struct _sas_device *
+__mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
+ u64 sas_address)
+{
+ struct _sas_device *sas_device;
+
+ assert_spin_locked(&ioc->sas_device_lock);
+
+ list_for_each_entry(sas_device, &ioc->sas_device_list, list)
+ if (sas_device->sas_address == sas_address)
+ goto found_device;
+
+ list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
+ if (sas_device->sas_address == sas_address)
+ goto found_device;
+
+ return NULL;
+
+found_device:
+ sas_device_get(sas_device);
+ return sas_device;
+}
+
/**
- * mpt3sas_scsih_sas_device_find_by_sas_address - sas device search
+ * mpt3sas_get_sdev_by_addr - sas device search
* @ioc: per adapter object
* @sas_address: sas address
* Context: Calling function should acquire ioc->sas_device_lock
* object.
*/
struct _sas_device *
-mpt3sas_scsih_sas_device_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
u64 sas_address)
+{
+ struct _sas_device *sas_device;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+ sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ return sas_device;
+}
+
+static struct _sas_device *
+__mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
{
struct _sas_device *sas_device;
+ assert_spin_locked(&ioc->sas_device_lock);
+
list_for_each_entry(sas_device, &ioc->sas_device_list, list)
- if (sas_device->sas_address == sas_address)
- return sas_device;
+ if (sas_device->handle == handle)
+ goto found_device;
list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
- if (sas_device->sas_address == sas_address)
- return sas_device;
+ if (sas_device->handle == handle)
+ goto found_device;
return NULL;
+
+found_device:
+ sas_device_get(sas_device);
+ return sas_device;
}
/**
- * _scsih_sas_device_find_by_handle - sas device search
+ * mpt3sas_get_sdev_by_handle - sas device search
* @ioc: per adapter object
* @handle: sas device handle (assigned by firmware)
* Context: Calling function should acquire ioc->sas_device_lock
* object.
*/
static struct _sas_device *
-_scsih_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
{
struct _sas_device *sas_device;
+ unsigned long flags;
- list_for_each_entry(sas_device, &ioc->sas_device_list, list)
- if (sas_device->handle == handle)
- return sas_device;
-
- list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
- if (sas_device->handle == handle)
- return sas_device;
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return NULL;
+ return sas_device;
}
/**
* @sas_device: the sas_device object
* Context: This function will acquire ioc->sas_device_lock.
*
- * Removing object and freeing associated memory from the ioc->sas_device_list.
+ * If sas_device is on the list, remove it and decrement its reference count.
*/
static void
_scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc,
ioc->name, sas_device->enclosure_level,
sas_device->connector_name);
+ /*
+ * The lock serializes access to the list, but we still need to verify
+ * that nobody removed the entry while we were waiting on the lock.
+ */
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- list_del(&sas_device->list);
- kfree(sas_device);
+ if (!list_empty(&sas_device->list)) {
+ list_del_init(&sas_device->list);
+ sas_device_put(sas_device);
+ }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
return;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (sas_device)
- list_del(&sas_device->list);
+ sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+ if (sas_device) {
+ list_del_init(&sas_device->list);
+ sas_device_put(sas_device);
+ }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device)
+ if (sas_device) {
_scsih_remove_device(ioc, sas_device);
+ sas_device_put(sas_device);
+ }
}
/**
return;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
- sas_address);
- if (sas_device)
- list_del(&sas_device->list);
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc, sas_address);
+ if (sas_device) {
+ list_del_init(&sas_device->list);
+ sas_device_put(sas_device);
+ }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device)
+ if (sas_device) {
_scsih_remove_device(ioc, sas_device);
+ sas_device_put(sas_device);
+ }
}
/**
sas_device->enclosure_level, sas_device->connector_name));
spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device_get(sas_device);
list_add_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
sas_device->connector_name));
spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device_get(sas_device);
list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
_scsih_determine_boot_device(ioc, sas_device, 0);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
/**
- * _scsih_raid_device_find_by_handle - raid device search
+ * mpt3sas_raid_device_find_by_handle - raid device search
* @ioc: per adapter object
* @handle: sas device handle (assigned by firmware)
* Context: Calling function should acquire ioc->raid_device_lock
* This searches for raid_device based on handle, then return raid_device
* object.
*/
-static struct _raid_device *
-_scsih_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
{
struct _raid_device *raid_device, *r;
}
/**
- * _scsih_change_queue_depth - setting device queue depth
+ * scsih_change_queue_depth - setting device queue depth
* @sdev: scsi device struct
* @qdepth: requested queue depth
*
* Returns queue depth.
*/
-static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+int
+scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
struct Scsi_Host *shost = sdev->host;
int max_depth;
goto not_sata;
if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
goto not_sata;
+
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
- sas_device_priv_data->sas_target->sas_address);
- if (sas_device && sas_device->device_info &
- MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
- max_depth = MPT3SAS_SATA_QUEUE_DEPTH;
+ sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
+ if (sas_device) {
+ if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+ max_depth = MPT3SAS_SATA_QUEUE_DEPTH;
+
+ sas_device_put(sas_device);
+ }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
not_sata:
}
/**
- * _scsih_target_alloc - target add routine
+ * scsih_target_alloc - target add routine
* @starget: scsi target struct
*
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
-static int
-_scsih_target_alloc(struct scsi_target *starget)
+int
+scsih_target_alloc(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
sas_target_priv_data->handle = raid_device->handle;
sas_target_priv_data->sas_address = raid_device->wwid;
sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
- raid_device->starget = starget;
+ sas_target_priv_data->raid_device = raid_device;
+ if (ioc->is_warpdrive)
+ raid_device->starget = starget;
}
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
return 0;
/* sas/sata devices */
spin_lock_irqsave(&ioc->sas_device_lock, flags);
rphy = dev_to_rphy(starget->dev.parent);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
rphy->identify.sas_address);
if (sas_device) {
sas_target_priv_data->handle = sas_device->handle;
sas_target_priv_data->sas_address = sas_device->sas_address;
+ sas_target_priv_data->sdev = sas_device;
sas_device->starget = starget;
sas_device->id = starget->id;
sas_device->channel = starget->channel;
}
/**
- * _scsih_target_destroy - target destroy routine
+ * scsih_target_destroy - target destroy routine
* @starget: scsi target struct
*
* Returns nothing.
*/
-static void
-_scsih_target_destroy(struct scsi_target *starget)
+void
+scsih_target_destroy(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
spin_lock_irqsave(&ioc->sas_device_lock, flags);
rphy = dev_to_rphy(starget->dev.parent);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
- rphy->identify.sas_address);
+ sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
if (sas_device && (sas_device->starget == starget) &&
(sas_device->id == starget->id) &&
(sas_device->channel == starget->channel))
sas_device->starget = NULL;
+ if (sas_device) {
+ /*
+ * Corresponding get() is in _scsih_target_alloc()
+ */
+ sas_target_priv_data->sdev = NULL;
+ sas_device_put(sas_device);
+
+ sas_device_put(sas_device);
+ }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
out:
}
/**
- * _scsih_slave_alloc - device add routine
+ * scsih_slave_alloc - device add routine
* @sdev: scsi device struct
*
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
-static int
-_scsih_slave_alloc(struct scsi_device *sdev)
+int
+scsih_slave_alloc(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
struct MPT3SAS_ADAPTER *ioc;
if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
sas_target_priv_data->sas_address);
if (sas_device && (sas_device->starget == NULL)) {
sdev_printk(KERN_INFO, sdev,
"%s : sas_device->starget set to starget @ %d\n",
- __func__, __LINE__);
+ __func__, __LINE__);
sas_device->starget = starget;
}
+
+ if (sas_device)
+ sas_device_put(sas_device);
+
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
}
/**
- * _scsih_slave_destroy - device destroy routine
+ * scsih_slave_destroy - device destroy routine
* @sdev: scsi device struct
*
* Returns nothing.
*/
-static void
-_scsih_slave_destroy(struct scsi_device *sdev)
+void
+scsih_slave_destroy(struct scsi_device *sdev)
{
struct MPT3SAS_TARGET *sas_target_priv_data;
struct scsi_target *starget;
if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
- sas_target_priv_data->sas_address);
+ sas_device = __mpt3sas_get_sdev_from_target(ioc,
+ sas_target_priv_data);
if (sas_device && !sas_target_priv_data->num_luns)
sas_device->starget = NULL;
+
+ if (sas_device)
+ sas_device_put(sas_device);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
*/
/**
- * _scsih_is_raid - return boolean indicating device is raid volume
+ * scsih_is_raid - return boolean indicating device is raid volume
* @dev the device struct object
*/
-static int
-_scsih_is_raid(struct device *dev)
+int
+scsih_is_raid(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
+ struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+ if (ioc->is_warpdrive)
+ return 0;
return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
}
/**
- * _scsih_get_resync - get raid volume resync percent complete
+ * scsih_get_resync - get raid volume resync percent complete
* @dev the device struct object
*/
-static void
-_scsih_get_resync(struct device *dev)
+void
+scsih_get_resync(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
percent_complete = 0;
handle = 0;
+ if (ioc->is_warpdrive)
+ goto out;
+
spin_lock_irqsave(&ioc->raid_device_lock, flags);
raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
sdev->channel);
percent_complete = 0;
out:
- raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+ raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
+ if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
+ raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
}
/**
- * _scsih_get_state - get raid volume level
+ * scsih_get_state - get raid volume level
* @dev the device struct object
*/
-static void
-_scsih_get_state(struct device *dev)
+void
+scsih_get_state(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
break;
}
out:
- raid_set_state(mpt3sas_raid_template, dev, state);
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+ raid_set_state(mpt2sas_raid_template, dev, state);
+ if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
+ raid_set_state(mpt3sas_raid_template, dev, state);
}
/**
* @volume_type: volume type
*/
static void
-_scsih_set_level(struct scsi_device *sdev, u8 volume_type)
+_scsih_set_level(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_device *sdev, u8 volume_type)
{
enum raid_level level = RAID_LEVEL_UNKNOWN;
break;
}
- raid_set_level(mpt3sas_raid_template, &sdev->sdev_gendev, level);
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+ raid_set_level(mpt2sas_raid_template,
+ &sdev->sdev_gendev, level);
+ if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
+ raid_set_level(mpt3sas_raid_template,
+ &sdev->sdev_gendev, level);
}
return 0;
}
-
-
/**
* _scsih_enable_tlr - setting TLR flags
* @ioc: per adapter object
}
/**
- * _scsih_slave_configure - device configure routine.
+ * scsih_slave_configure - device configure routine.
* @sdev: scsi device struct
*
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
-static int
-_scsih_slave_configure(struct scsi_device *sdev)
+int
+scsih_slave_configure(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
if (!raid_device) {
dfailprintk(ioc, pr_warn(MPT3SAS_FMT
return 1;
}
+ /*
+ * WARPDRIVE: Initialize the required data for Direct IO
+ */
+ mpt3sas_init_warpdrive_properties(ioc, raid_device);
/* RAID Queue Depth Support
* IS volume = underlying qdepth of drive type, either
break;
}
- sdev_printk(KERN_INFO, sdev,
- "%s: handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n",
- r_level, raid_device->handle,
- (unsigned long long)raid_device->wwid,
- raid_device->num_pds, ds);
-
+ if (!ioc->hide_ir_msg)
+ sdev_printk(KERN_INFO, sdev,
+ "%s: handle(0x%04x), wwid(0x%016llx),"
+ " pd_count(%d), type(%s)\n",
+ r_level, raid_device->handle,
+ (unsigned long long)raid_device->wwid,
+ raid_device->num_pds, ds);
- _scsih_change_queue_depth(sdev, qdepth);
+ scsih_change_queue_depth(sdev, qdepth);
-/* raid transport support */
- _scsih_set_level(sdev, raid_device->volume_type);
+ /* raid transport support */
+ if (!ioc->is_warpdrive)
+ _scsih_set_level(ioc, sdev, raid_device->volume_type);
return 0;
}
}
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
sas_device_priv_data->sas_target->sas_address);
if (!sas_device) {
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
ds, sas_device->enclosure_level,
sas_device->connector_name);
+ sas_device_put(sas_device);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!ssp_target)
_scsih_display_sata_capabilities(ioc, handle, sdev);
- _scsih_change_queue_depth(sdev, qdepth);
+ scsih_change_queue_depth(sdev, qdepth);
if (ssp_target) {
sas_read_port_mode_page(sdev);
}
/**
- * _scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * scsih_bios_param - fetch head, sector, cylinder info for a disk
* @sdev: scsi device struct
* @bdev: pointer to block device context
* @capacity: device size (in 512 byte sectors)
*
* Return nothing.
*/
-static int
-_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+int
+scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int params[])
{
int heads;
if (!priv_target)
return;
- device_str = "volume";
+ if (ioc->hide_ir_msg)
+ device_str = "WarpDrive";
+ else
+ device_str = "volume";
scsi_print_command(scmd);
if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
device_str, (unsigned long long)priv_target->sas_address);
} else {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
- priv_target->sas_address);
+ sas_device = __mpt3sas_get_sdev_from_target(ioc, priv_target);
if (sas_device) {
if (priv_target->flags &
MPT_TARGET_FLAGS_RAID_COMPONENT) {
"enclosure level(0x%04x),connector name(%s)\n",
sas_device->enclosure_level,
sas_device->connector_name);
+
+ sas_device_put(sas_device);
}
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
}
/**
- * _scsih_abort - eh threads main abort routine
+ * scsih_abort - eh threads main abort routine
* @scmd: pointer to scsi command object
*
* Returns SUCCESS if command aborted else FAILED
*/
-static int
-_scsih_abort(struct scsi_cmnd *scmd)
+int
+scsih_abort(struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
struct MPT3SAS_DEVICE *sas_device_priv_data;
}
/**
- * _scsih_dev_reset - eh threads main device reset routine
+ * scsih_dev_reset - eh threads main device reset routine
* @scmd: pointer to scsi command object
*
* Returns SUCCESS if command aborted else FAILED
*/
-static int
-_scsih_dev_reset(struct scsi_cmnd *scmd)
+int
+scsih_dev_reset(struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
struct MPT3SAS_DEVICE *sas_device_priv_data;
- struct _sas_device *sas_device;
- unsigned long flags;
+ struct _sas_device *sas_device = NULL;
u16 handle;
int r;
+ struct scsi_target *starget = scmd->device->sdev_target;
+ struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
+
sdev_printk(KERN_INFO, scmd->device,
"attempting device reset! scmd(%p)\n", scmd);
_scsih_tm_display_info(ioc, scmd);
handle = 0;
if (sas_device_priv_data->sas_target->flags &
MPT_TARGET_FLAGS_RAID_COMPONENT) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc,
- sas_device_priv_data->sas_target->handle);
+ sas_device = mpt3sas_get_sdev_from_target(ioc,
+ target_priv_data);
if (sas_device)
handle = sas_device->volume_handle;
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
} else
handle = sas_device_priv_data->sas_target->handle;
out:
sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+ if (sas_device)
+ sas_device_put(sas_device);
+
return r;
}
/**
- * _scsih_target_reset - eh threads main target reset routine
+ * scsih_target_reset - eh threads main target reset routine
* @scmd: pointer to scsi command object
*
* Returns SUCCESS if command aborted else FAILED
*/
-static int
-_scsih_target_reset(struct scsi_cmnd *scmd)
+int
+scsih_target_reset(struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
struct MPT3SAS_DEVICE *sas_device_priv_data;
- struct _sas_device *sas_device;
- unsigned long flags;
+ struct _sas_device *sas_device = NULL;
u16 handle;
int r;
struct scsi_target *starget = scmd->device->sdev_target;
+ struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
starget_printk(KERN_INFO, starget, "attempting target reset! scmd(%p)\n",
scmd);
handle = 0;
if (sas_device_priv_data->sas_target->flags &
MPT_TARGET_FLAGS_RAID_COMPONENT) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc,
- sas_device_priv_data->sas_target->handle);
+ sas_device = mpt3sas_get_sdev_from_target(ioc,
+ target_priv_data);
if (sas_device)
handle = sas_device->volume_handle;
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
} else
handle = sas_device_priv_data->sas_target->handle;
out:
starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+ if (sas_device)
+ sas_device_put(sas_device);
+
return r;
}
/**
- * _scsih_host_reset - eh threads main host reset routine
+ * scsih_host_reset - eh threads main host reset routine
* @scmd: pointer to scsi command object
*
* Returns SUCCESS if command aborted else FAILED
*/
-static int
-_scsih_host_reset(struct scsi_cmnd *scmd)
+int
+scsih_host_reset(struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
int r, retval;
return;
spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ fw_event_work_get(fw_event);
INIT_LIST_HEAD(&fw_event->list);
list_add_tail(&fw_event->list, &ioc->fw_event_list);
INIT_WORK(&fw_event->work, _firmware_event_work);
+ fw_event_work_get(fw_event);
queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
/**
- * _scsih_fw_event_free - delete fw_event
+ * _scsih_fw_event_del_from_list - delete fw_event from the list
* @ioc: per adapter object
* @fw_event: object describing the event
* Context: This function will acquire ioc->fw_event_lock.
*
- * This removes firmware event object from link list, frees associated memory.
+ * If the fw_event is on the fw_event_list, remove it and do a put.
*
* Return nothing.
*/
static void
-_scsih_fw_event_free(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work
+_scsih_fw_event_del_from_list(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work
*fw_event)
{
unsigned long flags;
spin_lock_irqsave(&ioc->fw_event_lock, flags);
- list_del(&fw_event->list);
- kfree(fw_event);
+ if (!list_empty(&fw_event->list)) {
+ list_del_init(&fw_event->list);
+ fw_event_work_put(fw_event);
+ }
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
{
struct fw_event_work *fw_event;
+ u16 sz;
if (ioc->is_driver_loading)
return;
- fw_event = kzalloc(sizeof(*fw_event) + sizeof(*event_data),
- GFP_ATOMIC);
+ sz = sizeof(*event_data);
+ fw_event = alloc_fw_event_work(sz);
if (!fw_event)
return;
fw_event->event = MPT3SAS_PROCESS_TRIGGER_DIAG;
fw_event->ioc = ioc;
memcpy(fw_event->event_data, event_data, sizeof(*event_data));
_scsih_fw_event_add(ioc, fw_event);
+ fw_event_work_put(fw_event);
}
/**
if (ioc->is_driver_loading)
return;
- fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+ fw_event = alloc_fw_event_work(0);
if (!fw_event)
return;
fw_event->event = MPT3SAS_REMOVE_UNRESPONDING_DEVICES;
fw_event->ioc = ioc;
_scsih_fw_event_add(ioc, fw_event);
+ fw_event_work_put(fw_event);
}
/**
{
struct fw_event_work *fw_event;
- fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+ fw_event = alloc_fw_event_work(0);
if (!fw_event)
return;
fw_event->event = MPT3SAS_PORT_ENABLE_COMPLETE;
fw_event->ioc = ioc;
_scsih_fw_event_add(ioc, fw_event);
+ fw_event_work_put(fw_event);
+}
+
+static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+ struct fw_event_work *fw_event = NULL;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ if (!list_empty(&ioc->fw_event_list)) {
+ fw_event = list_first_entry(&ioc->fw_event_list,
+ struct fw_event_work, list);
+ list_del_init(&fw_event->list);
+ }
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+ return fw_event;
}
/**
static void
_scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
{
- struct fw_event_work *fw_event, *next;
+ struct fw_event_work *fw_event;
if (list_empty(&ioc->fw_event_list) ||
!ioc->firmware_event_thread || in_interrupt())
return;
- list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
- if (cancel_delayed_work_sync(&fw_event->delayed_work)) {
- _scsih_fw_event_free(ioc, fw_event);
- continue;
- }
+ while ((fw_event = dequeue_next_fw_event(ioc))) {
+ /*
+ * Wait on the fw_event to complete. If this returns 1, then
+ * the event was never executed, and we need a put for the
+ * reference the delayed_work had on the fw_event.
+ *
+ * If it did execute, we wait for it to finish, and the put will
+ * happen from _firmware_event_work()
+ */
+ if (cancel_delayed_work_sync(&fw_event->delayed_work))
+ fw_event_work_put(fw_event);
+
+ fw_event_work_put(fw_event);
}
}
struct scsi_device *sdev;
struct _sas_device *sas_device;
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
if (!sas_device)
return;
continue;
_scsih_internal_device_block(sdev, sas_device_priv_data);
}
+
+ sas_device_put(sas_device);
}
/**
if (mpt3sas_port->remote_identify.device_type ==
SAS_END_DEVICE) {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device =
- mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
- mpt3sas_port->remote_identify.sas_address);
- if (sas_device)
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+ mpt3sas_port->remote_identify.sas_address);
+ if (sas_device) {
set_bit(sas_device->handle,
- ioc->blocking_handles);
+ ioc->blocking_handles);
+ sas_device_put(sas_device);
+ }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
}
{
Mpi2SCSITaskManagementRequest_t *mpi_request;
u16 smid;
- struct _sas_device *sas_device;
+ struct _sas_device *sas_device = NULL;
struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
u64 sas_address = 0;
unsigned long flags;
return;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
if (sas_device && sas_device->starget &&
sas_device->starget->hostdata) {
sas_target_priv_data = sas_device->starget->hostdata;
if (!smid) {
delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
if (!delayed_tr)
- return;
+ goto out;
INIT_LIST_HEAD(&delayed_tr->list);
delayed_tr->handle = handle;
list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
dewtprintk(ioc, pr_info(MPT3SAS_FMT
"DELAYED:tr:handle(0x%04x), (open)\n",
ioc->name, handle));
- return;
+ goto out;
}
dewtprintk(ioc, pr_info(MPT3SAS_FMT
mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
mpt3sas_base_put_smid_hi_priority(ioc, smid);
mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL);
+
+out:
+ if (sas_device)
+ sas_device_put(sas_device);
}
/**
unsigned long flags;
spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
if (raid_device && raid_device->starget &&
raid_device->starget->hostdata) {
sas_target_priv_data =
a = 0;
b = 0;
+ if (ioc->is_warpdrive)
+ return;
+
/* Volume Resets for Deleted or Removed */
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
for (i = 0; i < event_data->NumElements; i++, element++) {
}
+
/**
- * _scsih_qcmd - main scsi request entry point
+ * scsih_qcmd - main scsi request entry point
* @scmd: pointer to scsi command object
* @done: function pointer to be invoked on completion
*
* SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
* SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
*/
-static int
-_scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
+int
+scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
struct MPT3SAS_DEVICE *sas_device_priv_data;
struct MPT3SAS_TARGET *sas_target_priv_data;
+ struct _raid_device *raid_device;
Mpi2SCSIIORequest_t *mpi_request;
u32 mpi_control;
u16 smid;
u16 handle;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_SCSI)
scsi_print_command(scmd);
-#endif
sas_device_priv_data = scmd->device->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
/* set tags */
mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
- if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
+ /* Make sure Device is not raid volume.
+ * We do not expose raid functionality to upper layer for warpdrive.
+ */
+ if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev)
+ && (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
scmd->cmd_len != 32)
mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
} else
ioc->build_zero_len_sge(ioc, &mpi_request->SGL);
+ raid_device = sas_target_priv_data->raid_device;
+ if (raid_device && raid_device->direct_io_enabled)
+ mpt3sas_setup_direct_io(ioc, scmd, raid_device, mpi_request,
+ smid);
+
if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len |
MPI25_SCSIIO_IOFLAGS_FAST_PATH);
mpt3sas_base_put_smid_fast_path(ioc, smid, handle);
} else
- mpt3sas_base_put_smid_scsi_io(ioc, smid, handle);
+ mpt3sas_base_put_smid_scsi_io(ioc, smid,
+ le16_to_cpu(mpi_request->DevHandle));
} else
mpt3sas_base_put_smid_default(ioc, smid);
return 0;
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
* @ioc: per adapter object
char *desc_scsi_state = ioc->tmp_string;
u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
struct _sas_device *sas_device = NULL;
- unsigned long flags;
struct scsi_target *starget = scmd->device->sdev_target;
struct MPT3SAS_TARGET *priv_target = starget->hostdata;
char *device_str = NULL;
if (!priv_target)
return;
- device_str = "volume";
+ if (ioc->hide_ir_msg)
+ device_str = "WarpDrive";
+ else
+ device_str = "volume";
if (log_info == 0x31170000)
return;
pr_warn(MPT3SAS_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
device_str, (unsigned long long)priv_target->sas_address);
} else {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
- priv_target->sas_address);
+ sas_device = mpt3sas_get_sdev_from_target(ioc, priv_target);
if (sas_device) {
pr_warn(MPT3SAS_FMT
"\tsas_address(0x%016llx), phy(%d)\n",
" connector name( %s)\n", ioc->name,
sas_device->enclosure_level,
sas_device->connector_name);
+
+ sas_device_put(sas_device);
}
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
pr_warn(MPT3SAS_FMT
_scsih_response_code(ioc, response_bytes[0]);
}
}
-#endif
/**
* _scsih_turn_on_pfa_led - illuminate PFA LED
Mpi2SepRequest_t mpi_request;
struct _sas_device *sas_device;
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
if (!sas_device)
return;
&mpi_request)) != 0) {
pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
__FILE__, __LINE__, __func__);
- return;
+ goto out;
}
sas_device->pfa_led_on = 1;
"enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
le32_to_cpu(mpi_reply.IOCLogInfo)));
- return;
+ goto out;
}
+out:
+ sas_device_put(sas_device);
}
+
/**
* _scsih_turn_off_pfa_led - turn off Fault LED
* @ioc: per adapter object
return;
}
}
+
/**
* _scsih_send_event_to_turn_on_pfa_led - fire delayed event
* @ioc: per adapter object
{
struct fw_event_work *fw_event;
- fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+ fw_event = alloc_fw_event_work(0);
if (!fw_event)
return;
fw_event->event = MPT3SAS_TURN_ON_PFA_LED;
fw_event->device_handle = handle;
fw_event->ioc = ioc;
_scsih_fw_event_add(ioc, fw_event);
+ fw_event_work_put(fw_event);
}
/**
/* only handle non-raid devices */
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return;
- }
+ sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+ if (!sas_device)
+ goto out_unlock;
+
starget = sas_device->starget;
sas_target_priv_data = starget->hostdata;
if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
- ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return;
- }
+ ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)))
+ goto out_unlock;
+
if (sas_device->enclosure_handle != 0)
starget_printk(KERN_INFO, starget, "predicted fault, "
"enclosure logical id(0x%016llx), slot(%d)\n",
if (!event_reply) {
pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
- return;
+ goto out;
}
event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
mpt3sas_ctl_add_to_event_log(ioc, event_reply);
kfree(event_reply);
+out:
+ if (sas_device)
+ sas_device_put(sas_device);
+ return;
+
+out_unlock:
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ goto out;
}
/**
u32 log_info;
struct MPT3SAS_DEVICE *sas_device_priv_data;
u32 response_code = 0;
+ unsigned long flags;
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
}
ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+ /*
+ * WARPDRIVE: If direct_io is set then it is directIO,
+ * the failed direct I/O should be redirected to volume
+ */
+ if (mpt3sas_scsi_direct_io_get(ioc, smid) &&
+ ((ioc_status & MPI2_IOCSTATUS_MASK)
+ != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ ioc->scsi_lookup[smid - 1].scmd = scmd;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ mpt3sas_scsi_direct_io_set(ioc, smid, 0);
+ memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+ mpi_request->DevHandle =
+ cpu_to_le16(sas_device_priv_data->sas_target->handle);
+ mpt3sas_base_put_smid_scsi_io(ioc, smid,
+ sas_device_priv_data->sas_target->handle);
+ return 0;
+ }
/* turning off TLR */
scsi_state = mpi_reply->SCSIState;
if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
if (!sas_device_priv_data->tlr_snoop_check) {
sas_device_priv_data->tlr_snoop_check++;
- if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
- response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
- sas_device_priv_data->flags &=
- ~MPT_DEVICE_TLR_ON;
+ if (!ioc->is_warpdrive &&
+ !scsih_is_raid(&scmd->device->sdev_gendev) &&
+ sas_is_tlr_enabled(scmd->device) &&
+ response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
+ sas_disable_tlr(scmd->device);
+ sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
+ }
}
xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
le16_to_cpu(mpi_reply->DevHandle));
mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (!(ioc->logging_level & MPT_DEBUG_REPLY) &&
((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
(scmd->sense_buffer[2] == MEDIUM_ERROR) ||
(scmd->sense_buffer[2] == HARDWARE_ERROR)))
_scsih_scsi_ioc_info(ioc, scmd, mpi_reply, smid);
-#endif
}
switch (ioc_status) {
case MPI2_IOCSTATUS_BUSY:
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
_scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
-#endif
out:
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
sas_address);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return;
- }
+ if (!sas_device)
+ goto out_unlock;
if (unlikely(sas_device->handle != handle)) {
starget = sas_device->starget;
pr_err(MPT3SAS_FMT
"device is not present handle(0x%04x), flags!!!\n",
ioc->name, handle);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return;
+ goto out_unlock;
}
/* check if there were any issues with discovery */
if (_scsih_check_access_status(ioc, sas_address, handle,
- sas_device_pg0.AccessStatus)) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return;
- }
+ sas_device_pg0.AccessStatus))
+ goto out_unlock;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
_scsih_ublock_io_device(ioc, sas_address);
+ if (sas_device)
+ sas_device_put(sas_device);
+ return;
+
+out_unlock:
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (sas_device)
+ sas_device_put(sas_device);
}
/**
u32 ioc_status;
u64 sas_address;
u32 device_info;
- unsigned long flags;
if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
sas_device_pg0.AccessStatus))
return -1;
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
- sas_address);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- if (sas_device)
+ sas_device = mpt3sas_get_sdev_by_addr(ioc,
+ sas_address);
+ if (sas_device) {
+ sas_device_put(sas_device);
return -1;
+ }
sas_device = kzalloc(sizeof(struct _sas_device),
GFP_KERNEL);
return 0;
}
+ kref_init(&sas_device->refcount);
sas_device->handle = handle;
if (_scsih_get_sas_address(ioc,
le16_to_cpu(sas_device_pg0.ParentDevHandle),
else
_scsih_sas_device_add(ioc, sas_device);
+ sas_device_put(sas_device);
return 0;
}
sas_target_priv_data->handle =
MPT3SAS_INVALID_DEVICE_HANDLE;
}
- mpt3sas_transport_port_remove(ioc,
+
+ if (!ioc->hide_drives)
+ mpt3sas_transport_port_remove(ioc,
sas_device->sas_address,
sas_device->sas_address_parent);
"%s: exit: enclosure level(0x%04x), connector name(%s)\n",
ioc->name, __func__, sas_device->enclosure_level,
sas_device->connector_name));
-
- kfree(sas_device);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_topology_change_event_debug - debug for topology event
* @ioc: per adapter object
}
}
-#endif
/**
* _scsih_sas_topology_change_event - handle topology changes
(Mpi2EventDataSasTopologyChangeList_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_topology_change_event_debug(ioc, event_data);
-#endif
if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
return 0;
return 0;
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_device_status_change_event_debug - debug for device event
* @event_data: event data payload
event_data->ASC, event_data->ASCQ);
pr_info("\n");
}
-#endif
/**
* _scsih_sas_device_status_change_event - handle device status change
(Mpi2EventDataSasDeviceStatusChange_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_device_status_change_event_debug(ioc,
event_data);
-#endif
/* In MPI Revision K (0xC), the internal device reset complete was
* implemented, so avoid setting tm_busy flag for older firmware.
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_address = le64_to_cpu(event_data->SASAddress);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
sas_address);
- if (!sas_device || !sas_device->starget) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return;
- }
+ if (!sas_device || !sas_device->starget)
+ goto out;
target_priv_data = sas_device->starget->hostdata;
- if (!target_priv_data) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- return;
- }
+ if (!target_priv_data)
+ goto out;
if (event_data->ReasonCode ==
MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
target_priv_data->tm_busy = 1;
else
target_priv_data->tm_busy = 0;
+
+out:
+ if (sas_device)
+ sas_device_put(sas_device);
+
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
* event
(unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
le16_to_cpu(event_data->StartSlot));
}
-#endif
/**
* _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
_scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
(Mpi2EventDataSasEnclDevStatusChange_t *)
fw_event->event_data);
-#endif
}
/**
Mpi2EventDataSasDiscovery_t *event_data =
(Mpi2EventDataSasDiscovery_t *) fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
pr_info(MPT3SAS_FMT "discovery event: (%s)", ioc->name,
(event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
"start" : "stop");
- if (event_data->DiscoveryStatus)
- pr_info("discovery_status(0x%08x)",
- le32_to_cpu(event_data->DiscoveryStatus));
- pr_info("\n");
+ if (event_data->DiscoveryStatus)
+ pr_info("discovery_status(0x%08x)",
+ le32_to_cpu(event_data->DiscoveryStatus));
+ pr_info("\n");
}
-#endif
if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
!ioc->sas_hba.num_phys) {
u16 ioc_status;
u32 log_info;
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+ return rc;
mutex_lock(&ioc->scsih_cmds.mutex);
struct scsi_target *starget = NULL;
spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
if (raid_device) {
if (raid_device->starget) {
starget = raid_device->starget;
u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
if (sas_device) {
sas_device->volume_handle = 0;
sas_device->volume_wwid = 0;
/* exposing raid component */
if (starget)
starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
+
+ sas_device_put(sas_device);
}
/**
&volume_wwid);
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
if (sas_device) {
set_bit(handle, ioc->pd_handles);
if (sas_device->starget && sas_device->starget->hostdata) {
/* hiding raid component */
_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+
if (starget)
starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
+
+ sas_device_put(sas_device);
}
/**
Mpi2EventIrConfigElement_t *element)
{
struct _sas_device *sas_device;
- unsigned long flags;
u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t sas_device_pg0;
set_bit(handle, ioc->pd_handles);
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
if (sas_device) {
_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+ sas_device_put(sas_device);
return;
}
_scsih_add_device(ioc, handle, 0, 1);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
* @ioc: per adapter object
element->PhysDiskNum);
}
}
-#endif
/**
* _scsih_sas_ir_config_change_event - handle ir configuration change events
(Mpi2EventDataIrConfigChangeList_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
- if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
+ (!ioc->hide_ir_msg))
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
-#endif
-
foreign_config = (le32_to_cpu(event_data->Flags) &
MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
- if (ioc->shost_recovery) {
-
+ if (ioc->shost_recovery &&
+ ioc->hba_mpi_version_belonged != MPI2_VERSION) {
for (i = 0; i < event_data->NumElements; i++, element++) {
if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_HIDE)
_scsih_ir_fastpath(ioc,
}
return;
}
+
for (i = 0; i < event_data->NumElements; i++, element++) {
switch (element->ReasonCode) {
le16_to_cpu(element->VolDevHandle));
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
- _scsih_sas_pd_hide(ioc, element);
+ if (!ioc->is_warpdrive)
+ _scsih_sas_pd_hide(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
- _scsih_sas_pd_expose(ioc, element);
+ if (!ioc->is_warpdrive)
+ _scsih_sas_pd_expose(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_HIDE:
- _scsih_sas_pd_add(ioc, element);
+ if (!ioc->is_warpdrive)
+ _scsih_sas_pd_add(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
- _scsih_sas_pd_delete(ioc, element);
+ if (!ioc->is_warpdrive)
+ _scsih_sas_pd_delete(ioc, element);
break;
}
}
handle = le16_to_cpu(event_data->VolDevHandle);
state = le32_to_cpu(event_data->NewValue);
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
- ioc->name, __func__, handle,
- le32_to_cpu(event_data->PreviousValue), state));
+ if (!ioc->hide_ir_msg)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+ ioc->name, __func__, handle,
+ le32_to_cpu(event_data->PreviousValue), state));
switch (state) {
case MPI2_RAID_VOL_STATE_MISSING:
case MPI2_RAID_VOL_STATE_FAILED:
case MPI2_RAID_VOL_STATE_OPTIMAL:
spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
if (raid_device)
u16 handle, parent_handle;
u32 state;
struct _sas_device *sas_device;
- unsigned long flags;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t sas_device_pg0;
u32 ioc_status;
handle = le16_to_cpu(event_data->PhysDiskDevHandle);
state = le32_to_cpu(event_data->NewValue);
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
- ioc->name, __func__, handle,
+ if (!ioc->hide_ir_msg)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+ ioc->name, __func__, handle,
le32_to_cpu(event_data->PreviousValue), state));
+
switch (state) {
case MPI2_RAID_PD_STATE_ONLINE:
case MPI2_RAID_PD_STATE_DEGRADED:
case MPI2_RAID_PD_STATE_OPTIMAL:
case MPI2_RAID_PD_STATE_HOT_SPARE:
- set_bit(handle, ioc->pd_handles);
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!ioc->is_warpdrive)
+ set_bit(handle, ioc->pd_handles);
- if (sas_device)
+ sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+ if (sas_device) {
+ sas_device_put(sas_device);
return;
+ }
if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
&sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_ir_operation_status_event_debug - debug for IR op event
* @ioc: per adapter object
le16_to_cpu(event_data->VolDevHandle),
event_data->PercentComplete);
}
-#endif
/**
* _scsih_sas_ir_operation_status_event - handle RAID operation events
unsigned long flags;
u16 handle;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
- if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
+ (!ioc->hide_ir_msg))
_scsih_sas_ir_operation_status_event_debug(ioc,
event_data);
-#endif
/* code added for raid transport support */
if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
spin_lock_irqsave(&ioc->raid_device_lock, flags);
handle = le16_to_cpu(event_data->VolDevHandle);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
if (raid_device)
raid_device->percent_complete =
event_data->PercentComplete;
_scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
u16 handle)
{
- struct MPT3SAS_TARGET *sas_target_priv_data;
+ struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
struct scsi_target *starget;
struct _raid_device *raid_device;
unsigned long flags;
starget_printk(KERN_INFO, raid_device->starget,
"handle(0x%04x), wwid(0x%016llx)\n", handle,
(unsigned long long)raid_device->wwid);
+
+ /*
+ * WARPDRIVE: The handles of the PDs might have changed
+ * across the host reset so re-initialize the
+ * required data for Direct IO
+ */
+ mpt3sas_init_warpdrive_properties(ioc, raid_device);
spin_lock_irqsave(&ioc->raid_device_lock, flags);
if (raid_device->handle == handle) {
spin_unlock_irqrestore(&ioc->raid_device_lock,
}
/* refresh the pd_handles */
+ if (!ioc->is_warpdrive) {
phys_disk_num = 0xFF;
memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
handle = le16_to_cpu(pd_pg0.DevHandle);
set_bit(handle, ioc->pd_handles);
}
+ }
out:
pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n",
ioc->name);
struct _raid_device *raid_device, *raid_device_next;
struct list_head tmp_list;
unsigned long flags;
+ LIST_HEAD(head);
pr_info(MPT3SAS_FMT "removing unresponding devices: start\n",
ioc->name);
/* removing unresponding end devices */
pr_info(MPT3SAS_FMT "removing unresponding devices: end-devices\n",
ioc->name);
+ /*
+ * Iterate, pulling off devices marked as non-responding. We become the
+ * owner for the reference the list had on any object we prune.
+ */
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
list_for_each_entry_safe(sas_device, sas_device_next,
&ioc->sas_device_list, list) {
if (!sas_device->responding)
- mpt3sas_device_remove_by_sas_address(ioc,
- sas_device->sas_address);
+ list_move_tail(&sas_device->list, &head);
else
sas_device->responding = 0;
}
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ /*
+ * Now, uninitialize and remove the unresponding devices we pruned.
+ */
+ list_for_each_entry_safe(sas_device, sas_device_next, &head, list) {
+ _scsih_remove_device(ioc, sas_device);
+ list_del_init(&sas_device->list);
+ sas_device_put(sas_device);
+ }
/* removing unresponding volumes */
if (ioc->ir_firmware) {
}
phys_disk_num = pd_pg0.PhysDiskNum;
handle = le16_to_cpu(pd_pg0.DevHandle);
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device)
+ sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+ if (sas_device) {
+ sas_device_put(sas_device);
continue;
+ }
if (mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
&sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
handle) != 0)
if (!(_scsih_is_end_device(
le32_to_cpu(sas_device_pg0.DeviceInfo))))
continue;
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = mpt3sas_get_sdev_by_addr(ioc,
le64_to_cpu(sas_device_pg0.SASAddress));
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device)
+ if (sas_device) {
+ sas_device_put(sas_device);
continue;
+ }
parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
pr_info(MPT3SAS_FMT "\tBEFORE adding end device: " \
static void
_mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
{
+ _scsih_fw_event_del_from_list(ioc, fw_event);
+
/* the queue is being flushed so ignore this event */
- if (ioc->remove_host ||
- ioc->pci_error_recovery) {
- _scsih_fw_event_free(ioc, fw_event);
+ if (ioc->remove_host || ioc->pci_error_recovery) {
+ fw_event_work_put(fw_event);
return;
}
fw_event->event_data);
break;
case MPT3SAS_REMOVE_UNRESPONDING_DEVICES:
- while (scsi_host_in_recovery(ioc->shost) || ioc->shost_recovery)
+ while (scsi_host_in_recovery(ioc->shost) ||
+ ioc->shost_recovery) {
+ /*
+ * If we're unloading, bail. Otherwise, this can become
+ * an infinite loop.
+ */
+ if (ioc->remove_host)
+ goto out;
ssleep(1);
+ }
_scsih_remove_unresponding_sas_devices(ioc);
_scsih_scan_for_devices_after_reset(ioc);
break;
_scsih_sas_ir_operation_status_event(ioc, fw_event);
break;
}
- _scsih_fw_event_free(ioc, fw_event);
+out:
+ fw_event_work_put(fw_event);
}
/**
(Mpi2EventDataIrVolume_t *)
mpi_reply->EventData);
break;
+ case MPI2_EVENT_LOG_ENTRY_ADDED:
+ {
+ Mpi2EventDataLogEntryAdded_t *log_entry;
+ u32 *log_code;
+
+ if (!ioc->is_warpdrive)
+ break;
+
+ log_entry = (Mpi2EventDataLogEntryAdded_t *)
+ mpi_reply->EventData;
+ log_code = (u32 *)log_entry->LogData;
+ if (le16_to_cpu(log_entry->LogEntryQualifier)
+ != MPT2_WARPDRIVE_LOGENTRY)
+ break;
+
+ switch (le32_to_cpu(*log_code)) {
+ case MPT2_WARPDRIVE_LC_SSDT:
+ pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
+ "IO Throttling has occurred in the WarpDrive "
+ "subsystem. Check WarpDrive documentation for "
+ "additional details.\n", ioc->name);
+ break;
+ case MPT2_WARPDRIVE_LC_SSDLW:
+ pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
+ "Program/Erase Cycles for the WarpDrive subsystem "
+ "in degraded range. Check WarpDrive documentation "
+ "for additional details.\n", ioc->name);
+ break;
+ case MPT2_WARPDRIVE_LC_SSDLF:
+ pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
+ "There are no Program/Erase Cycles for the "
+ "WarpDrive subsystem. The storage device will be "
+ "in read-only mode. Check WarpDrive documentation "
+ "for additional details.\n", ioc->name);
+ break;
+ case MPT2_WARPDRIVE_LC_BRMF:
+ pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
+ "The Backup Rail Monitor has failed on the "
+ "WarpDrive subsystem. Check WarpDrive "
+ "documentation for additional details.\n",
+ ioc->name);
+ break;
+ }
+
+ break;
+ }
case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
case MPI2_EVENT_IR_OPERATION_STATUS:
case MPI2_EVENT_SAS_DISCOVERY:
}
sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
- fw_event = kzalloc(sizeof(*fw_event) + sz, GFP_ATOMIC);
+ fw_event = alloc_fw_event_work(sz);
if (!fw_event) {
pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
fw_event->VP_ID = mpi_reply->VP_ID;
fw_event->event = event;
_scsih_fw_event_add(ioc, fw_event);
+ fw_event_work_put(fw_event);
return 1;
}
-/* shost template */
-static struct scsi_host_template scsih_driver_template = {
- .module = THIS_MODULE,
- .name = "Fusion MPT SAS Host",
- .proc_name = MPT3SAS_DRIVER_NAME,
- .queuecommand = _scsih_qcmd,
- .target_alloc = _scsih_target_alloc,
- .slave_alloc = _scsih_slave_alloc,
- .slave_configure = _scsih_slave_configure,
- .target_destroy = _scsih_target_destroy,
- .slave_destroy = _scsih_slave_destroy,
- .scan_finished = _scsih_scan_finished,
- .scan_start = _scsih_scan_start,
- .change_queue_depth = _scsih_change_queue_depth,
- .eh_abort_handler = _scsih_abort,
- .eh_device_reset_handler = _scsih_dev_reset,
- .eh_target_reset_handler = _scsih_target_reset,
- .eh_host_reset_handler = _scsih_host_reset,
- .bios_param = _scsih_bios_param,
- .can_queue = 1,
- .this_id = -1,
- .sg_tablesize = MPT3SAS_SG_DEPTH,
- .max_sectors = 32767,
- .cmd_per_lun = 7,
- .use_clustering = ENABLE_CLUSTERING,
- .shost_attrs = mpt3sas_host_attrs,
- .sdev_attrs = mpt3sas_dev_attrs,
- .track_queue_depth = 1,
-};
-
/**
* _scsih_expander_node_remove - removing expander device from list.
* @ioc: per adapter object
mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
- pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
+ if (!ioc->hide_ir_msg)
+ pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
init_completion(&ioc->scsih_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
mpi_reply = ioc->scsih_cmds.reply;
- pr_info(MPT3SAS_FMT
- "IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo));
+ if (!ioc->hide_ir_msg)
+ pr_info(MPT3SAS_FMT "IR shutdown "
+ "(complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo));
}
out:
}
/**
- * _scsih_remove - detach and remove add host
+ * scsih_remove - detach and remove add host
* @pdev: PCI device struct
*
* Routine called when unloading the driver.
* Return nothing.
*/
-static void _scsih_remove(struct pci_dev *pdev)
+void scsih_remove(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
sas_remove_host(shost);
scsi_remove_host(shost);
mpt3sas_base_detach(ioc);
+ spin_lock(&gioc_lock);
list_del(&ioc->list);
+ spin_unlock(&gioc_lock);
scsi_host_put(shost);
}
/**
- * _scsih_shutdown - routine call during system shutdown
+ * scsih_shutdown - routine call during system shutdown
* @pdev: PCI device struct
*
* Return nothing.
*/
-static void
-_scsih_shutdown(struct pci_dev *pdev)
+void
+scsih_shutdown(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
list_move_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (ioc->hide_drives)
+ return;
if (!mpt3sas_transport_port_add(ioc, handle,
sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
}
}
+static struct _sas_device *get_next_sas_device(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct _sas_device *sas_device = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ if (!list_empty(&ioc->sas_device_init_list)) {
+ sas_device = list_first_entry(&ioc->sas_device_init_list,
+ struct _sas_device, list);
+ sas_device_get(sas_device);
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ return sas_device;
+}
+
+static void sas_device_make_active(struct MPT3SAS_ADAPTER *ioc,
+ struct _sas_device *sas_device)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+
+ /*
+ * Since we dropped the lock during the call to port_add(), we need to
+ * be careful here that somebody else didn't move or delete this item
+ * while we were busy with other things.
+ *
+ * If it was on the list, we need a put() for the reference the list
+ * had. Either way, we need a get() for the destination list.
+ */
+ if (!list_empty(&sas_device->list)) {
+ list_del_init(&sas_device->list);
+ sas_device_put(sas_device);
+ }
+
+ sas_device_get(sas_device);
+ list_add_tail(&sas_device->list, &ioc->sas_device_list);
+
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
/**
* _scsih_probe_sas - reporting sas devices to sas transport
* @ioc: per adapter object
static void
_scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
{
- struct _sas_device *sas_device, *next;
- unsigned long flags;
+ struct _sas_device *sas_device;
- /* SAS Device List */
- list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
- list) {
+ if (ioc->hide_drives)
+ return;
+ while ((sas_device = get_next_sas_device(ioc))) {
if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
sas_device->sas_address_parent)) {
- list_del(&sas_device->list);
- kfree(sas_device);
+ _scsih_sas_device_remove(ioc, sas_device);
+ sas_device_put(sas_device);
continue;
} else if (!sas_device->starget) {
/*
mpt3sas_transport_port_remove(ioc,
sas_device->sas_address,
sas_device->sas_address_parent);
- list_del(&sas_device->list);
- kfree(sas_device);
+ _scsih_sas_device_remove(ioc, sas_device);
+ sas_device_put(sas_device);
continue;
}
}
-
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- list_move_tail(&sas_device->list, &ioc->sas_device_list);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ sas_device_make_active(ioc, sas_device);
+ sas_device_put(sas_device);
}
}
}
/**
- * _scsih_scan_start - scsi lld callback for .scan_start
+ * scsih_scan_start - scsi lld callback for .scan_start
* @shost: SCSI host pointer
*
* The shost has the ability to discover targets on its own instead
* of scanning the entire bus. In our implemention, we will kick off
* firmware discovery.
*/
-static void
-_scsih_scan_start(struct Scsi_Host *shost)
+void
+scsih_scan_start(struct Scsi_Host *shost)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
int rc;
}
/**
- * _scsih_scan_finished - scsi lld callback for .scan_finished
+ * scsih_scan_finished - scsi lld callback for .scan_finished
* @shost: SCSI host pointer
* @time: elapsed time of the scan in jiffies
*
* scsi_host and the elapsed time of the scan in jiffies. In our implemention,
* we wait for firmware discovery to complete, then return 1.
*/
-static int
-_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
+int
+scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return 1;
}
+/* shost template for SAS 2.0 HBA devices */
+static struct scsi_host_template mpt2sas_driver_template = {
+ .module = THIS_MODULE,
+ .name = "Fusion MPT SAS Host",
+ .proc_name = MPT2SAS_DRIVER_NAME,
+ .queuecommand = scsih_qcmd,
+ .target_alloc = scsih_target_alloc,
+ .slave_alloc = scsih_slave_alloc,
+ .slave_configure = scsih_slave_configure,
+ .target_destroy = scsih_target_destroy,
+ .slave_destroy = scsih_slave_destroy,
+ .scan_finished = scsih_scan_finished,
+ .scan_start = scsih_scan_start,
+ .change_queue_depth = scsih_change_queue_depth,
+ .eh_abort_handler = scsih_abort,
+ .eh_device_reset_handler = scsih_dev_reset,
+ .eh_target_reset_handler = scsih_target_reset,
+ .eh_host_reset_handler = scsih_host_reset,
+ .bios_param = scsih_bios_param,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = MPT2SAS_SG_DEPTH,
+ .max_sectors = 32767,
+ .cmd_per_lun = 7,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = mpt3sas_host_attrs,
+ .sdev_attrs = mpt3sas_dev_attrs,
+ .track_queue_depth = 1,
+};
+
+/* raid transport support for SAS 2.0 HBA devices */
+static struct raid_function_template mpt2sas_raid_functions = {
+ .cookie = &mpt2sas_driver_template,
+ .is_raid = scsih_is_raid,
+ .get_resync = scsih_get_resync,
+ .get_state = scsih_get_state,
+};
+
+/* shost template for SAS 3.0 HBA devices */
+static struct scsi_host_template mpt3sas_driver_template = {
+ .module = THIS_MODULE,
+ .name = "Fusion MPT SAS Host",
+ .proc_name = MPT3SAS_DRIVER_NAME,
+ .queuecommand = scsih_qcmd,
+ .target_alloc = scsih_target_alloc,
+ .slave_alloc = scsih_slave_alloc,
+ .slave_configure = scsih_slave_configure,
+ .target_destroy = scsih_target_destroy,
+ .slave_destroy = scsih_slave_destroy,
+ .scan_finished = scsih_scan_finished,
+ .scan_start = scsih_scan_start,
+ .change_queue_depth = scsih_change_queue_depth,
+ .eh_abort_handler = scsih_abort,
+ .eh_device_reset_handler = scsih_dev_reset,
+ .eh_target_reset_handler = scsih_target_reset,
+ .eh_host_reset_handler = scsih_host_reset,
+ .bios_param = scsih_bios_param,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = MPT3SAS_SG_DEPTH,
+ .max_sectors = 32767,
+ .cmd_per_lun = 7,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = mpt3sas_host_attrs,
+ .sdev_attrs = mpt3sas_dev_attrs,
+ .track_queue_depth = 1,
+};
+
+/* raid transport support for SAS 3.0 HBA devices */
+static struct raid_function_template mpt3sas_raid_functions = {
+ .cookie = &mpt3sas_driver_template,
+ .is_raid = scsih_is_raid,
+ .get_resync = scsih_get_resync,
+ .get_state = scsih_get_state,
+};
+
+/**
+ * _scsih_determine_hba_mpi_version - determine in which MPI version class
+ * this device belongs to.
+ * @pdev: PCI device struct
+ *
+ * return MPI2_VERSION for SAS 2.0 HBA devices,
+ * MPI25_VERSION for SAS 3.0 HBA devices.
+ */
+u16
+_scsih_determine_hba_mpi_version(struct pci_dev *pdev)
+{
+
+ switch (pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SSS6200:
+ case MPI2_MFGPAGE_DEVID_SAS2004:
+ case MPI2_MFGPAGE_DEVID_SAS2008:
+ case MPI2_MFGPAGE_DEVID_SAS2108_1:
+ case MPI2_MFGPAGE_DEVID_SAS2108_2:
+ case MPI2_MFGPAGE_DEVID_SAS2108_3:
+ case MPI2_MFGPAGE_DEVID_SAS2116_1:
+ case MPI2_MFGPAGE_DEVID_SAS2116_2:
+ case MPI2_MFGPAGE_DEVID_SAS2208_1:
+ case MPI2_MFGPAGE_DEVID_SAS2208_2:
+ case MPI2_MFGPAGE_DEVID_SAS2208_3:
+ case MPI2_MFGPAGE_DEVID_SAS2208_4:
+ case MPI2_MFGPAGE_DEVID_SAS2208_5:
+ case MPI2_MFGPAGE_DEVID_SAS2208_6:
+ case MPI2_MFGPAGE_DEVID_SAS2308_1:
+ case MPI2_MFGPAGE_DEVID_SAS2308_2:
+ case MPI2_MFGPAGE_DEVID_SAS2308_3:
+ return MPI2_VERSION;
+ case MPI25_MFGPAGE_DEVID_SAS3004:
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ case MPI25_MFGPAGE_DEVID_SAS3108_1:
+ case MPI25_MFGPAGE_DEVID_SAS3108_2:
+ case MPI25_MFGPAGE_DEVID_SAS3108_5:
+ case MPI25_MFGPAGE_DEVID_SAS3108_6:
+ return MPI25_VERSION;
+ }
+ return 0;
+}
+
/**
* _scsih_probe - attach and add scsi host
* @pdev: PCI device struct
*
* Returns 0 success, anything else error.
*/
-static int
+int
_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct MPT3SAS_ADAPTER *ioc;
- struct Scsi_Host *shost;
+ struct Scsi_Host *shost = NULL;
int rv;
+ u16 hba_mpi_version;
- shost = scsi_host_alloc(&scsih_driver_template,
- sizeof(struct MPT3SAS_ADAPTER));
- if (!shost)
+ /* Determine in which MPI version class this pci device belongs */
+ hba_mpi_version = _scsih_determine_hba_mpi_version(pdev);
+ if (hba_mpi_version == 0)
return -ENODEV;
- /* init local params */
- ioc = shost_priv(shost);
- memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+ /* Enumerate only SAS 2.0 HBA's if hbas_to_enumerate is one,
+ * for other generation HBA's return with -ENODEV
+ */
+ if ((hbas_to_enumerate == 1) && (hba_mpi_version != MPI2_VERSION))
+ return -ENODEV;
+
+ /* Enumerate only SAS 3.0 HBA's if hbas_to_enumerate is two,
+ * for other generation HBA's return with -ENODEV
+ */
+ if ((hbas_to_enumerate == 2) && (hba_mpi_version != MPI25_VERSION))
+ return -ENODEV;
+
+ switch (hba_mpi_version) {
+ case MPI2_VERSION:
+ /* Use mpt2sas driver host template for SAS 2.0 HBA's */
+ shost = scsi_host_alloc(&mpt2sas_driver_template,
+ sizeof(struct MPT3SAS_ADAPTER));
+ if (!shost)
+ return -ENODEV;
+ ioc = shost_priv(shost);
+ memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+ ioc->hba_mpi_version_belonged = hba_mpi_version;
+ ioc->id = mpt2_ids++;
+ sprintf(ioc->driver_name, "%s", MPT2SAS_DRIVER_NAME);
+ if (pdev->device == MPI2_MFGPAGE_DEVID_SSS6200) {
+ ioc->is_warpdrive = 1;
+ ioc->hide_ir_msg = 1;
+ } else
+ ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
+ break;
+ case MPI25_VERSION:
+ /* Use mpt3sas driver host template for SAS 3.0 HBA's */
+ shost = scsi_host_alloc(&mpt3sas_driver_template,
+ sizeof(struct MPT3SAS_ADAPTER));
+ if (!shost)
+ return -ENODEV;
+ ioc = shost_priv(shost);
+ memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+ ioc->hba_mpi_version_belonged = hba_mpi_version;
+ ioc->id = mpt3_ids++;
+ sprintf(ioc->driver_name, "%s", MPT3SAS_DRIVER_NAME);
+ if (pdev->revision >= SAS3_PCI_DEVICE_C0_REVISION)
+ ioc->msix96_vector = 1;
+ break;
+ default:
+ return -ENODEV;
+ }
+
INIT_LIST_HEAD(&ioc->list);
+ spin_lock(&gioc_lock);
list_add_tail(&ioc->list, &mpt3sas_ioc_list);
+ spin_unlock(&gioc_lock);
ioc->shost = shost;
- ioc->id = mpt_ids++;
- sprintf(ioc->name, "%s%d", MPT3SAS_DRIVER_NAME, ioc->id);
ioc->pdev = pdev;
ioc->scsi_io_cb_idx = scsi_io_cb_idx;
ioc->tm_cb_idx = tm_cb_idx;
ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
/* misc semaphores and spin locks */
mutex_init(&ioc->reset_in_progress_mutex);
+ /* initializing pci_access_mutex lock */
+ mutex_init(&ioc->pci_access_mutex);
spin_lock_init(&ioc->ioc_reset_in_progress_lock);
spin_lock_init(&ioc->scsi_lookup_lock);
spin_lock_init(&ioc->sas_device_lock);
INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
INIT_LIST_HEAD(&ioc->reply_queue_list);
+ sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
+
/* init shost parameters */
shost->max_cmd_len = 32;
shost->max_lun = max_lun;
/* event thread */
snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
- "fw_event%d", ioc->id);
+ "fw_event_%s%d", ioc->driver_name, ioc->id);
ioc->firmware_event_thread = alloc_ordered_workqueue(
ioc->firmware_event_name, WQ_MEM_RECLAIM);
if (!ioc->firmware_event_thread) {
rv = -ENODEV;
goto out_attach_fail;
}
+
+ if (ioc->is_warpdrive) {
+ if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS)
+ ioc->hide_drives = 0;
+ else if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_HIDE_ALL_DISKS)
+ ioc->hide_drives = 1;
+ else {
+ if (mpt3sas_get_num_volumes(ioc))
+ ioc->hide_drives = 1;
+ else
+ ioc->hide_drives = 0;
+ }
+ } else
+ ioc->hide_drives = 0;
+
rv = scsi_add_host(shost, &pdev->dev);
if (rv) {
pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
out_attach_fail:
destroy_workqueue(ioc->firmware_event_thread);
out_thread_fail:
+ spin_lock(&gioc_lock);
list_del(&ioc->list);
+ spin_unlock(&gioc_lock);
scsi_host_put(shost);
return rv;
}
#ifdef CONFIG_PM
/**
- * _scsih_suspend - power management suspend main entry point
+ * scsih_suspend - power management suspend main entry point
* @pdev: PCI device struct
* @state: PM state change to (usually PCI_D3)
*
* Returns 0 success, anything else error.
*/
-static int
-_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+int
+scsih_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
}
/**
- * _scsih_resume - power management resume main entry point
+ * scsih_resume - power management resume main entry point
* @pdev: PCI device struct
*
* Returns 0 success, anything else error.
*/
-static int
-_scsih_resume(struct pci_dev *pdev)
+int
+scsih_resume(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
#endif /* CONFIG_PM */
/**
- * _scsih_pci_error_detected - Called when a PCI error is detected.
+ * scsih_pci_error_detected - Called when a PCI error is detected.
* @pdev: PCI device struct
* @state: PCI channel state
*
* Return value:
* PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
*/
-static pci_ers_result_t
-_scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+pci_ers_result_t
+scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
}
/**
- * _scsih_pci_slot_reset - Called when PCI slot has been reset.
+ * scsih_pci_slot_reset - Called when PCI slot has been reset.
* @pdev: PCI device struct
*
* Description: This routine is called by the pci error recovery
* code after the PCI slot has been reset, just before we
* should resume normal operations.
*/
-static pci_ers_result_t
-_scsih_pci_slot_reset(struct pci_dev *pdev)
+pci_ers_result_t
+scsih_pci_slot_reset(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
}
/**
- * _scsih_pci_resume() - resume normal ops after PCI reset
+ * scsih_pci_resume() - resume normal ops after PCI reset
* @pdev: pointer to PCI device
*
* Called when the error recovery driver tells us that its
* OK to resume normal operation. Use completion to allow
* halted scsi ops to resume.
*/
-static void
-_scsih_pci_resume(struct pci_dev *pdev)
+void
+scsih_pci_resume(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
}
/**
- * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
+ * scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
* @pdev: pointer to PCI device
*/
-static pci_ers_result_t
-_scsih_pci_mmio_enabled(struct pci_dev *pdev)
+pci_ers_result_t
+scsih_pci_mmio_enabled(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return PCI_ERS_RESULT_NEED_RESET;
}
-/* raid transport support */
-static struct raid_function_template mpt3sas_raid_functions = {
- .cookie = &scsih_driver_template,
- .is_raid = _scsih_is_raid,
- .get_resync = _scsih_get_resync,
- .get_state = _scsih_get_state,
+/*
+ * The pci device ids are defined in mpi/mpi2_cnfg.h.
+ */
+static const struct pci_device_id mpt3sas_pci_table[] = {
+ /* Spitfire ~ 2004 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Falcon ~ 2008 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Liberator ~ 2108 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Meteor ~ 2116 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Thunderbolt ~ 2208 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Mustang ~ 2308 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* SSS6200 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Fury ~ 3004 and 3008 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Invader ~ 3108 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
+ PCI_ANY_ID, PCI_ANY_ID },
+ {0} /* Terminating entry */
};
+MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
-static struct pci_error_handlers _scsih_err_handler = {
- .error_detected = _scsih_pci_error_detected,
- .mmio_enabled = _scsih_pci_mmio_enabled,
- .slot_reset = _scsih_pci_slot_reset,
- .resume = _scsih_pci_resume,
+static struct pci_error_handlers _mpt3sas_err_handler = {
+ .error_detected = scsih_pci_error_detected,
+ .mmio_enabled = scsih_pci_mmio_enabled,
+ .slot_reset = scsih_pci_slot_reset,
+ .resume = scsih_pci_resume,
};
-static struct pci_driver scsih_driver = {
+static struct pci_driver mpt3sas_driver = {
.name = MPT3SAS_DRIVER_NAME,
- .id_table = scsih_pci_table,
+ .id_table = mpt3sas_pci_table,
.probe = _scsih_probe,
- .remove = _scsih_remove,
- .shutdown = _scsih_shutdown,
- .err_handler = &_scsih_err_handler,
+ .remove = scsih_remove,
+ .shutdown = scsih_shutdown,
+ .err_handler = &_mpt3sas_err_handler,
#ifdef CONFIG_PM
- .suspend = _scsih_suspend,
- .resume = _scsih_resume,
+ .suspend = scsih_suspend,
+ .resume = scsih_resume,
#endif
};
-
/**
- * _scsih_init - main entry point for this driver.
+ * scsih_init - main entry point for this driver.
*
* Returns 0 success, anything else error.
*/
-static int __init
-_scsih_init(void)
+int
+scsih_init(void)
{
- int error;
-
- mpt_ids = 0;
-
- pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
- MPT3SAS_DRIVER_VERSION);
-
- mpt3sas_transport_template =
- sas_attach_transport(&mpt3sas_transport_functions);
- if (!mpt3sas_transport_template)
- return -ENODEV;
-
-/* raid transport support */
- mpt3sas_raid_template = raid_class_attach(&mpt3sas_raid_functions);
- if (!mpt3sas_raid_template) {
- sas_release_transport(mpt3sas_transport_template);
- return -ENODEV;
- }
+ mpt2_ids = 0;
+ mpt3_ids = 0;
mpt3sas_base_initialize_callback_handler();
tm_sas_control_cb_idx = mpt3sas_base_register_callback_handler(
_scsih_sas_control_complete);
- mpt3sas_ctl_init();
-
- error = pci_register_driver(&scsih_driver);
- if (error) {
- /* raid transport support */
- raid_class_release(mpt3sas_raid_template);
- sas_release_transport(mpt3sas_transport_template);
- }
-
- return error;
+ return 0;
}
/**
- * _scsih_exit - exit point for this driver (when it is a module).
+ * scsih_exit - exit point for this driver (when it is a module).
*
* Returns 0 success, anything else error.
*/
-static void __exit
-_scsih_exit(void)
+void
+scsih_exit(void)
{
- pr_info("mpt3sas version %s unloading\n",
- MPT3SAS_DRIVER_VERSION);
-
- mpt3sas_ctl_exit();
-
- pci_unregister_driver(&scsih_driver);
-
mpt3sas_base_release_callback_handler(scsi_io_cb_idx);
mpt3sas_base_release_callback_handler(tm_cb_idx);
mpt3sas_base_release_callback_handler(tm_sas_control_cb_idx);
/* raid transport support */
- raid_class_release(mpt3sas_raid_template);
+ if (hbas_to_enumerate != 1)
+ raid_class_release(mpt3sas_raid_template);
+ if (hbas_to_enumerate != 2)
+ raid_class_release(mpt2sas_raid_template);
sas_release_transport(mpt3sas_transport_template);
}
-module_init(_scsih_init);
-module_exit(_scsih_exit);
+/**
+ * _mpt3sas_init - main entry point for this driver.
+ *
+ * Returns 0 success, anything else error.
+ */
+static int __init
+_mpt3sas_init(void)
+{
+ int error;
+
+ pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
+ MPT3SAS_DRIVER_VERSION);
+
+ mpt3sas_transport_template =
+ sas_attach_transport(&mpt3sas_transport_functions);
+ if (!mpt3sas_transport_template)
+ return -ENODEV;
+
+ /* No need attach mpt3sas raid functions template
+ * if hbas_to_enumarate value is one.
+ */
+ if (hbas_to_enumerate != 1) {
+ mpt3sas_raid_template =
+ raid_class_attach(&mpt3sas_raid_functions);
+ if (!mpt3sas_raid_template) {
+ sas_release_transport(mpt3sas_transport_template);
+ return -ENODEV;
+ }
+ }
+
+ /* No need to attach mpt2sas raid functions template
+ * if hbas_to_enumarate value is two
+ */
+ if (hbas_to_enumerate != 2) {
+ mpt2sas_raid_template =
+ raid_class_attach(&mpt2sas_raid_functions);
+ if (!mpt2sas_raid_template) {
+ sas_release_transport(mpt3sas_transport_template);
+ return -ENODEV;
+ }
+ }
+
+ error = scsih_init();
+ if (error) {
+ scsih_exit();
+ return error;
+ }
+
+ mpt3sas_ctl_init(hbas_to_enumerate);
+
+ error = pci_register_driver(&mpt3sas_driver);
+ if (error)
+ scsih_exit();
+
+ return error;
+}
+
+/**
+ * _mpt3sas_exit - exit point for this driver (when it is a module).
+ *
+ */
+static void __exit
+_mpt3sas_exit(void)
+{
+ pr_info("mpt3sas version %s unloading\n",
+ MPT3SAS_DRIVER_VERSION);
+
+ pci_unregister_driver(&mpt3sas_driver);
+
+ mpt3sas_ctl_exit(hbas_to_enumerate);
+
+ scsih_exit();
+}
+
+module_init(_mpt3sas_init);
+module_exit(_mpt3sas_exit);
rphy->identify = mpt3sas_port->remote_identify;
if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = mpt3sas_get_sdev_by_addr(ioc,
mpt3sas_port->remote_identify.sas_address);
if (!sas_device) {
dfailprintk(ioc, printk(MPT3SAS_FMT
ioc->name, __FILE__, __LINE__, __func__);
}
- if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE)
+ if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
sas_device->pend_sas_rphy_add = 0;
+ sas_device_put(sas_device);
+ }
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &rphy->dev,
int rc;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
rphy->identify.sas_address);
if (sas_device) {
*identifier = sas_device->enclosure_logical_id;
rc = 0;
+ sas_device_put(sas_device);
} else {
*identifier = 0;
rc = -ENXIO;
}
+
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
return rc;
}
int rc;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device = __mpt3sas_get_sdev_by_addr(ioc,
rphy->identify.sas_address);
- if (sas_device)
+ if (sas_device) {
rc = sas_device->slot;
- else
+ sas_device_put(sas_device);
+ } else {
rc = -ENXIO;
+ }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
return rc;
}
--- /dev/null
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * Copyright (C) 2012-2014 LSI Corporation
+ * Copyright (C) 2013-2015 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _warpdrive_disable_ddio - Disable direct I/O for all the volumes
+ * @ioc: per adapter object
+ */
+static void
+_warpdrive_disable_ddio(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2RaidVolPage1_t vol_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ struct _raid_device *raid_device;
+ u16 handle;
+ u16 ioc_status;
+ unsigned long flags;
+
+ handle = 0xFFFF;
+ while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(vol_pg1.DevHandle);
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+ if (raid_device)
+ raid_device->direct_io_enabled = 0;
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ }
+ return;
+}
+
+
+/**
+ * mpt3sas_get_num_volumes - Get number of volumes in the ioc
+ * @ioc: per adapter object
+ */
+u8
+mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2RaidVolPage1_t vol_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 handle;
+ u8 vol_cnt = 0;
+ u16 ioc_status;
+
+ handle = 0xFFFF;
+ while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ vol_cnt++;
+ handle = le16_to_cpu(vol_pg1.DevHandle);
+ }
+ return vol_cnt;
+}
+
+
+/**
+ * mpt3sas_init_warpdrive_properties - Set properties for warpdrive direct I/O.
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ */
+void
+mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+ struct _raid_device *raid_device)
+{
+ Mpi2RaidVolPage0_t *vol_pg0;
+ Mpi2RaidPhysDiskPage0_t pd_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 sz;
+ u8 num_pds, count;
+ unsigned long stripe_sz, block_sz;
+ u8 stripe_exp, block_exp;
+ u64 dev_max_lba;
+
+ if (!ioc->is_warpdrive)
+ return;
+
+ if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "globally as drives are exposed\n", ioc->name);
+ return;
+ }
+ if (mpt3sas_get_num_volumes(ioc) > 1) {
+ _warpdrive_disable_ddio(ioc);
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "globally as number of drives > 1\n", ioc->name);
+ return;
+ }
+ if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
+ &num_pds)) || !num_pds) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "Failure in computing number of drives\n", ioc->name);
+ return;
+ }
+
+ sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+ sizeof(Mpi2RaidVol0PhysDisk_t));
+ vol_pg0 = kzalloc(sz, GFP_KERNEL);
+ if (!vol_pg0) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "Memory allocation failure for RVPG0\n", ioc->name);
+ return;
+ }
+
+ if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+ MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "Failure in retrieving RVPG0\n", ioc->name);
+ kfree(vol_pg0);
+ return;
+ }
+
+ /*
+ * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
+ * assumed for WARPDRIVE, disable direct I/O
+ */
+ if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
+ pr_warn(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x): num_mem=%d, "
+ "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
+ num_pds, MPT_MAX_WARPDRIVE_PDS);
+ kfree(vol_pg0);
+ return;
+ }
+ for (count = 0; count < num_pds; count++) {
+ if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+ &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+ vol_pg0->PhysDisk[count].PhysDiskNum) ||
+ pd_pg0.DevHandle == MPT3SAS_INVALID_DEVICE_HANDLE) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
+ "disabled for the drive with handle(0x%04x) member"
+ "handle retrieval failed for member number=%d\n",
+ ioc->name, raid_device->handle,
+ vol_pg0->PhysDisk[count].PhysDiskNum);
+ goto out_error;
+ }
+ /* Disable direct I/O if member drive lba exceeds 4 bytes */
+ dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
+ if (dev_max_lba >> 32) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
+ "disabled for the drive with handle(0x%04x) member"
+ " handle (0x%04x) unsupported max lba 0x%016llx\n",
+ ioc->name, raid_device->handle,
+ le16_to_cpu(pd_pg0.DevHandle),
+ (unsigned long long)dev_max_lba);
+ goto out_error;
+ }
+
+ raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
+ }
+
+ /*
+ * Assumption for WD: Direct I/O is not supported if the volume is
+ * not RAID0
+ */
+ if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x): type=%d, "
+ "s_sz=%uK, blk_size=%u\n", ioc->name,
+ raid_device->handle, raid_device->volume_type,
+ (le32_to_cpu(vol_pg0->StripeSize) *
+ le16_to_cpu(vol_pg0->BlockSize)) / 1024,
+ le16_to_cpu(vol_pg0->BlockSize));
+ goto out_error;
+ }
+
+ stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+ stripe_exp = find_first_bit(&stripe_sz, 32);
+ if (stripe_exp == 32) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x) invalid stripe sz %uK\n",
+ ioc->name, raid_device->handle,
+ (le32_to_cpu(vol_pg0->StripeSize) *
+ le16_to_cpu(vol_pg0->BlockSize)) / 1024);
+ goto out_error;
+ }
+ raid_device->stripe_exponent = stripe_exp;
+ block_sz = le16_to_cpu(vol_pg0->BlockSize);
+ block_exp = find_first_bit(&block_sz, 16);
+ if (block_exp == 16) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x) invalid block sz %u\n",
+ ioc->name, raid_device->handle,
+ le16_to_cpu(vol_pg0->BlockSize));
+ goto out_error;
+ }
+ raid_device->block_exponent = block_exp;
+ raid_device->direct_io_enabled = 1;
+
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is Enabled for the drive"
+ " with handle(0x%04x)\n", ioc->name, raid_device->handle);
+ /*
+ * WARPDRIVE: Though the following fields are not used for direct IO,
+ * stored for future purpose:
+ */
+ raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
+ raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+ raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
+
+
+ kfree(vol_pg0);
+ return;
+
+out_error:
+ raid_device->direct_io_enabled = 0;
+ for (count = 0; count < num_pds; count++)
+ raid_device->pd_handle[count] = 0;
+ kfree(vol_pg0);
+ return;
+}
+
+/**
+ * mpt3sas_scsi_direct_io_get - returns direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ */
+inline u8
+mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return ioc->scsi_lookup[smid - 1].direct_io;
+}
+
+/**
+ * mpt3sas_scsi_direct_io_set - sets direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @direct_io: Zero or non-zero value to set in the direct_io flag
+ *
+ * Returns Nothing.
+ */
+inline void
+mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
+{
+ ioc->scsi_lookup[smid - 1].direct_io = direct_io;
+}
+
+/**
+ * mpt3sas_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @raid_device: pointer to raid device data structure
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ * @smid: system request message index
+ *
+ * Returns nothing
+ */
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+ struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ u16 smid)
+{
+ sector_t v_lba, p_lba, stripe_off, column, io_size;
+ u32 stripe_sz, stripe_exp;
+ u8 num_pds, cmd = scmd->cmnd[0];
+
+ if (cmd != READ_10 && cmd != WRITE_10 &&
+ cmd != READ_16 && cmd != WRITE_16)
+ return;
+
+ if (cmd == READ_10 || cmd == WRITE_10)
+ v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
+ else
+ v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
+
+ io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
+
+ if (v_lba + io_size - 1 > raid_device->max_lba)
+ return;
+
+ stripe_sz = raid_device->stripe_sz;
+ stripe_exp = raid_device->stripe_exponent;
+ stripe_off = v_lba & (stripe_sz - 1);
+
+ /* Return unless IO falls within a stripe */
+ if (stripe_off + io_size > stripe_sz)
+ return;
+
+ num_pds = raid_device->num_pds;
+ p_lba = v_lba >> stripe_exp;
+ column = sector_div(p_lba, num_pds);
+ p_lba = (p_lba << stripe_exp) + stripe_off;
+ mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
+
+ if (cmd == READ_10 || cmd == WRITE_10)
+ put_unaligned_be32(lower_32_bits(p_lba),
+ &mpi_request->CDB.CDB32[2]);
+ else
+ put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
+
+ mpt3sas_scsi_direct_io_set(ioc, smid, 1);
+}
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = mvst_host_attrs,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
tasklet_kill(&((struct mvs_prv_info *)sha->lldd_ha)->mv_tasklet);
#endif
+ scsi_remove_host(mvi->shost);
sas_unregister_ha(sha);
sas_remove_host(mvi->shost);
- scsi_remove_host(mvi->shost);
MVS_CHIP_DISP->interrupt_disable(mvi);
free_irq(mvi->pdev->irq, sha);
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/ktime.h>
#include <linux/blkdev.h>
#include <linux/io.h>
#include <scsi/scsi.h>
struct mvumi_hs_page2 *hs_page2;
struct mvumi_hs_page4 *hs_page4;
struct mvumi_hs_page3 *hs_page3;
- struct timeval time;
- unsigned int local_time;
+ u64 time;
+ u64 local_time;
switch (hs_header->page_code) {
case HS_PAGE_HOST_INFO:
hs_page2->slot_number = 0;
hs_page2->intr_level = 0;
hs_page2->intr_vector = 0;
- do_gettimeofday(&time);
- local_time = (unsigned int) (time.tv_sec -
- (sys_tz.tz_minuteswest * 60));
+ time = ktime_get_real_seconds();
+ local_time = (time - (sys_tz.tz_minuteswest * 60));
hs_page2->seconds_since1970 = local_time;
hs_header->checksum = mvumi_calculate_checksum(hs_header,
hs_header->frame_length);
chip_8076,
chip_8077,
chip_8006,
+ chip_8070,
+ chip_8072
};
enum phy_speed {
[chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
[chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
[chip_8006] = {0, 16, &pm8001_80xx_dispatch,},
+ [chip_8070] = {0, 8, &pm8001_80xx_dispatch,},
+ [chip_8072] = {0, 16, &pm8001_80xx_dispatch,},
};
static int pm8001_id;
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = pm8001_host_attrs,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
#ifdef PM8001_USE_TASKLET
/* Tasklet for non msi-x interrupt handler */
- if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ if ((!pdev->msix_cap || !pci_msi_enabled())
+ || (pm8001_ha->chip_id == chip_8001))
tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
(unsigned long)&(pm8001_ha->irq_vector[0]));
else
payload.minor_function = 0;
payload.length = 128;
}
+ } else if ((pm8001_ha->chip_id == chip_8070 ||
+ pm8001_ha->chip_id == chip_8072) &&
+ pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+ payload.minor_function = 4;
+ payload.length = 4096;
} else {
payload.minor_function = 1;
payload.length = 4096;
else if (deviceid == 0x0042)
pm8001_ha->sas_addr[j] =
payload.func_specific[0x010 + i];
+ } else if ((pm8001_ha->chip_id == chip_8070 ||
+ pm8001_ha->chip_id == chip_8072) &&
+ pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+ pm8001_ha->sas_addr[j] =
+ payload.func_specific[0x010 + i];
} else
pm8001_ha->sas_addr[j] =
payload.func_specific[0x804 + i];
return 0;
}
+struct pm8001_mpi3_phy_pg_trx_config {
+ u32 LaneLosCfg;
+ u32 LanePgaCfg1;
+ u32 LanePisoCfg1;
+ u32 LanePisoCfg2;
+ u32 LanePisoCfg3;
+ u32 LanePisoCfg4;
+ u32 LanePisoCfg5;
+ u32 LanePisoCfg6;
+ u32 LaneBctCtrl;
+};
+
+/**
+ * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings
+ * @pm8001_ha : our adapter
+ * @phycfg : PHY config page to populate
+ */
+static
+void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_mpi3_phy_pg_trx_config *phycfg)
+{
+ phycfg->LaneLosCfg = 0x00000132;
+ phycfg->LanePgaCfg1 = 0x00203949;
+ phycfg->LanePisoCfg1 = 0x000000FF;
+ phycfg->LanePisoCfg2 = 0xFF000001;
+ phycfg->LanePisoCfg3 = 0xE7011300;
+ phycfg->LanePisoCfg4 = 0x631C40C0;
+ phycfg->LanePisoCfg5 = 0xF8102036;
+ phycfg->LanePisoCfg6 = 0xF74A1000;
+ phycfg->LaneBctCtrl = 0x00FB33F8;
+}
+
+/**
+ * pm8001_get_external_phy_settings : Retrieves the external PHY settings
+ * @pm8001_ha : our adapter
+ * @phycfg : PHY config page to populate
+ */
+static
+void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_mpi3_phy_pg_trx_config *phycfg)
+{
+ phycfg->LaneLosCfg = 0x00000132;
+ phycfg->LanePgaCfg1 = 0x00203949;
+ phycfg->LanePisoCfg1 = 0x000000FF;
+ phycfg->LanePisoCfg2 = 0xFF000001;
+ phycfg->LanePisoCfg3 = 0xE7011300;
+ phycfg->LanePisoCfg4 = 0x63349140;
+ phycfg->LanePisoCfg5 = 0xF8102036;
+ phycfg->LanePisoCfg6 = 0xF80D9300;
+ phycfg->LaneBctCtrl = 0x00FB33F8;
+}
+
+/**
+ * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext
+ * @pm8001_ha : our adapter
+ * @phymask : The PHY mask
+ */
+static
+void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
+{
+ switch (pm8001_ha->pdev->subsystem_device) {
+ case 0x0070: /* H1280 - 8 external 0 internal */
+ case 0x0072: /* H12F0 - 16 external 0 internal */
+ *phymask = 0x0000;
+ break;
+
+ case 0x0071: /* H1208 - 0 external 8 internal */
+ case 0x0073: /* H120F - 0 external 16 internal */
+ *phymask = 0xFFFF;
+ break;
+
+ case 0x0080: /* H1244 - 4 external 4 internal */
+ *phymask = 0x00F0;
+ break;
+
+ case 0x0081: /* H1248 - 4 external 8 internal */
+ *phymask = 0x0FF0;
+ break;
+
+ case 0x0082: /* H1288 - 8 external 8 internal */
+ *phymask = 0xFF00;
+ break;
+
+ default:
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Unknown subsystem device=0x%.04x",
+ pm8001_ha->pdev->subsystem_device));
+ }
+}
+
+/**
+ * pm8001_set_phy_settings_ven_117c_12Gb : Configure ATTO 12Gb PHY settings
+ * @pm8001_ha : our adapter
+ */
+static
+int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
+ struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
+ int phymask = 0;
+ int i = 0;
+
+ memset(&phycfg_int, 0, sizeof(phycfg_int));
+ memset(&phycfg_ext, 0, sizeof(phycfg_ext));
+
+ pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
+ pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
+ pm8001_get_phy_mask(pm8001_ha, &phymask);
+
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ if (phymask & (1 << i)) {/* Internal PHY */
+ pm8001_set_phy_profile_single(pm8001_ha, i,
+ sizeof(phycfg_int) / sizeof(u32),
+ (u32 *)&phycfg_int);
+
+ } else { /* External PHY */
+ pm8001_set_phy_profile_single(pm8001_ha, i,
+ sizeof(phycfg_ext) / sizeof(u32),
+ (u32 *)&phycfg_ext);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID.
+ * @pm8001_ha : our hba.
+ */
+static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
+{
+ switch (pm8001_ha->pdev->subsystem_vendor) {
+ case PCI_VENDOR_ID_ATTO:
+ if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
+ return 0;
+ else
+ return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
+
+ case PCI_VENDOR_ID_ADAPTEC2:
+ case 0:
+ return 0;
+
+ default:
+ return pm8001_get_phy_settings_info(pm8001_ha);
+ }
+}
+
#ifdef PM8001_USE_MSIX
/**
* pm8001_setup_msix - enable MSI-X interrupt
pdev = pm8001_ha->pdev;
#ifdef PM8001_USE_MSIX
- if (pdev->msix_cap)
+ if (pdev->msix_cap && pci_msi_enabled())
return pm8001_setup_msix(pm8001_ha);
else {
PM8001_INIT_DBG(pm8001_ha,
intx:
/* initialize the INT-X interrupt */
+ pm8001_ha->irq_vector[0].irq_id = 0;
+ pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
return rc;
pm8001_init_sas_add(pm8001_ha);
/* phy setting support for motherboard controller */
- if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 &&
- pdev->subsystem_vendor != 0) {
- rc = pm8001_get_phy_settings_info(pm8001_ha);
- if (rc)
- goto err_out_shost;
- }
+ if (pm8001_configure_phy_settings(pm8001_ha))
+ goto err_out_shost;
+
pm8001_post_sas_ha_init(shost, chip);
rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
if (rc)
struct pm8001_hba_info *pm8001_ha;
int i, j;
pm8001_ha = sha->lldd_ha;
+ scsi_remove_host(pm8001_ha->shost);
sas_unregister_ha(sha);
sas_remove_host(pm8001_ha->shost);
list_del(&pm8001_ha->list);
- scsi_remove_host(pm8001_ha->shost);
PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
#endif
#ifdef PM8001_USE_TASKLET
/* For non-msix and msix interrupts */
- if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+ (pm8001_ha->chip_id == chip_8001))
tasklet_kill(&pm8001_ha->tasklet[0]);
else
for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
#endif
#ifdef PM8001_USE_TASKLET
/* For non-msix and msix interrupts */
- if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+ (pm8001_ha->chip_id == chip_8001))
tasklet_kill(&pm8001_ha->tasklet[0]);
else
for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
goto err_out_disable;
#ifdef PM8001_USE_TASKLET
/* Tasklet for non msi-x interrupt handler */
- if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+ (pm8001_ha->chip_id == chip_8001))
tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
(unsigned long)&(pm8001_ha->irq_vector[0]));
else
for (i = 1; i < pm8001_ha->number_of_intr; i++)
PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
}
+
+ /* Chip documentation for the 8070 and 8072 SPCv */
+ /* states that a 500ms minimum delay is required */
+ /* before issuing commands. Otherwise, the firmare */
+ /* will enter an unrecoverable state. */
+
+ if (pm8001_ha->chip_id == chip_8070 ||
+ pm8001_ha->chip_id == chip_8072) {
+ mdelay(500);
+ }
+
+ /* Spin up the PHYs */
+
pm8001_ha->flags = PM8001F_RUN_TIME;
for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
pm8001_ha->phy[i].enable_completion = &completion;
PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
{ PCI_VENDOR_ID_ADAPTEC2, 0x8074,
PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
+ { PCI_VENDOR_ID_ATTO, 0x8070,
+ PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
+ { PCI_VENDOR_ID_ATTO, 0x8070,
+ PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
+ { PCI_VENDOR_ID_ATTO, 0x8072,
+ PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
+ { PCI_VENDOR_ID_ATTO, 0x8072,
+ PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
+ { PCI_VENDOR_ID_ATTO, 0x8070,
+ PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
+ { PCI_VENDOR_ID_ATTO, 0x8072,
+ PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
+ { PCI_VENDOR_ID_ATTO, 0x8072,
+ PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
{} /* terminate list */
};
MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
MODULE_DESCRIPTION(
- "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077 "
+ "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
"SAS/SATA controller driver");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
#define DEV_IS_EXPANDER(type) ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
#define IS_SPCV_12G(dev) ((dev->device == 0X8074) \
|| (dev->device == 0X8076) \
- || (dev->device == 0X8077))
+ || (dev->device == 0X8077) \
+ || (dev->device == 0X8070) \
+ || (dev->device == 0X8072))
#define PM8001_NAME_LENGTH 32/* generic length of strings */
extern struct list_head hba_list;
int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
u32 length, u8 *buf);
+void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
+ u32 phy, u32 length, u32 *buf);
int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
ssize_t pm80xx_get_fatal_dump(struct device *cdev,
struct device_attribute *attr, char *buf);
/* check iButton feature support for motherboard controller */
if (pm8001_ha->pdev->subsystem_vendor !=
PCI_VENDOR_ID_ADAPTEC2 &&
+ pm8001_ha->pdev->subsystem_vendor !=
+ PCI_VENDOR_ID_ATTO &&
pm8001_ha->pdev->subsystem_vendor != 0) {
ibutton0 = pm8001_cr32(pm8001_ha, 0,
MSGU_HOST_SCRATCH_PAD_6);
}
PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy settings completed\n"));
}
+
+void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
+ u32 phy, u32 length, u32 *buf)
+{
+ u32 tag, opc;
+ int rc, i;
+ struct set_phy_profile_req payload;
+ struct inbound_queue_table *circularQ;
+
+ memset(&payload, 0, sizeof(payload));
+
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk("Invalid tag"));
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ opc = OPC_INB_SET_PHY_PROFILE;
+
+ payload.tag = cpu_to_le32(tag);
+ payload.ppc_phyid = (((SAS_PHY_ANALOG_SETTINGS_PAGE & 0xF) << 8)
+ | (phy & 0xFF));
+
+ for (i = 0; i < length; i++)
+ payload.reserved[i] = cpu_to_le32(*(buf + i));
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+ if (rc)
+ pm8001_tag_free(pm8001_ha, tag);
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PHY %d settings applied", phy));
+}
const struct pm8001_dispatch pm8001_80xx_dispatch = {
.name = "pmc80xx",
.chip_init = pm80xx_chip_init,
#include <asm/processor.h>
#include <linux/libata.h>
#include <linux/mutex.h>
+#include <linux/ktime.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = pmcraid_host_attrs,
.proc_name = PMCRAID_DRIVER_NAME,
- .use_blk_tags = 1,
};
/*
__be32 time_stamp_len = cpu_to_be32(PMCRAID_TIMESTAMP_LEN);
struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl;
- struct timeval tv;
__le64 timestamp;
- do_gettimeofday(&tv);
- timestamp = tv.tv_sec * 1000;
+ timestamp = ktime_get_real_seconds() * 1000;
pinstance->timestamp_data->timestamp[0] = (__u8)(timestamp);
pinstance->timestamp_data->timestamp[1] = (__u8)((timestamp) >> 8);
.shost_attrs = qla2x00_host_attrs,
.supported_mode = MODE_INITIATOR,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
.shost_attrs = qla4xxx_host_attrs,
.host_reset = qla4xxx_host_reset,
.vendor_id = SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC,
- .use_blk_tags = 1,
};
static struct iscsi_transport qla4xxx_iscsi_transport = {
host->can_queue = MAX_SRBS ;
host->transportt = qla4xxx_scsi_transport;
- ret = scsi_init_shared_tag_map(host, MAX_SRBS);
- if (ret) {
- ql4_printk(KERN_WARNING, ha,
- "%s: scsi_init_shared_tag_map failed\n", __func__);
- goto probe_failed;
- }
-
pci_set_drvdata(pdev, ha);
ret = scsi_add_host(host, &pdev->dev);
*/
int scsi_change_queue_depth(struct scsi_device *sdev, int depth)
{
- unsigned long flags;
-
- if (depth <= 0)
- goto out;
-
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-
- /*
- * Check to see if the queue is managed by the block layer.
- * If it is, and we fail to adjust the depth, exit.
- *
- * Do not resize the tag map if it is a host wide share bqt,
- * because the size should be the hosts's can_queue. If there
- * is more IO than the LLD's can_queue (so there are not enuogh
- * tags) request_fn's host queue ready check will handle it.
- */
- if (!shost_use_blk_mq(sdev->host) && !sdev->host->bqt) {
- if (blk_queue_tagged(sdev->request_queue) &&
- blk_queue_resize_tags(sdev->request_queue, depth) != 0)
- goto out_unlock;
+ if (depth > 0) {
+ sdev->queue_depth = depth;
+ wmb();
}
- sdev->queue_depth = depth;
-out_unlock:
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-out:
return sdev->queue_depth;
}
EXPORT_SYMBOL(scsi_change_queue_depth);
* Default timeout
*/
#define SCSI_TIMEOUT (2*HZ)
+#define SCSI_REPORT_LUNS_TIMEOUT (30*HZ)
/*
* Prefix values for the SCSI id's (stored in sysfs name field)
WARN_ON_ONCE(!blk_get_queue(sdev->request_queue));
sdev->request_queue->queuedata = sdev;
- if (!shost_use_blk_mq(sdev->host) &&
- (shost->bqt || shost->hostt->use_blk_tags)) {
+ if (!shost_use_blk_mq(sdev->host)) {
blk_queue_init_tags(sdev->request_queue,
sdev->host->cmd_per_lun, shost->bqt,
shost->hostt->tag_alloc_policy);
result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
lun_data, length, &sshdr,
- SCSI_TIMEOUT + 4 * HZ, 3, NULL);
+ SCSI_REPORT_LUNS_TIMEOUT, 3, NULL);
SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
"scsi scan: REPORT LUNS"
return NULL;
if (shost->async_scan) {
- shost_printk(KERN_INFO, shost, "%s called twice\n", __func__);
- dump_stack();
+ shost_printk(KERN_DEBUG, shost, "%s called twice\n", __func__);
return NULL;
}
sdev_vpd_pg_attr(pg83);
sdev_vpd_pg_attr(pg80);
+static ssize_t show_inquiry(struct file *filep, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ if (!sdev->inquiry)
+ return -EINVAL;
+
+ return memory_read_from_buffer(buf, count, &off, sdev->inquiry,
+ sdev->inquiry_len);
+}
+
+static struct bin_attribute dev_attr_inquiry = {
+ .attr = {
+ .name = "inquiry",
+ .mode = S_IRUGO,
+ },
+ .size = 0,
+ .read = show_inquiry,
+};
+
static ssize_t
show_iostat_counterbits(struct device *dev, struct device_attribute *attr,
char *buf)
return -EINVAL;
sdev->queue_ramp_up_period = msecs_to_jiffies(period);
- return period;
+ return count;
}
static DEVICE_ATTR(queue_ramp_up_period, S_IRUGO | S_IWUSR,
static struct bin_attribute *scsi_sdev_bin_attrs[] = {
&dev_attr_vpd_pg83,
&dev_attr_vpd_pg80,
+ &dev_attr_inquiry,
NULL
};
static struct attribute_group scsi_sdev_attr_group = {
device_unregister(&sdev->sdev_dev);
transport_remove_device(dev);
scsi_dh_remove_device(sdev);
- device_del(dev);
- } else
- put_device(&sdev->sdev_dev);
+ }
/*
* Stop accepting new requests and wait until all queuecommand() and
blk_cleanup_queue(sdev->request_queue);
cancel_work_sync(&sdev->requeue_work);
+ /*
+ * Remove the device after blk_cleanup_queue() has been called such
+ * a possible bdi_register() call with the same name occurs after
+ * blk_cleanup_queue() has called bdi_destroy().
+ */
+ if (sdev->is_visible)
+ device_del(dev);
+ else
+ put_device(&sdev->sdev_dev);
+
if (sdev->host->hostt->slave_destroy)
sdev->host->hostt->slave_destroy(sdev);
transport_destroy_device(dev);
void scsi_remove_target(struct device *dev)
{
struct Scsi_Host *shost = dev_to_shost(dev->parent);
- struct scsi_target *starget, *last = NULL;
+ struct scsi_target *starget;
unsigned long flags;
- /* remove targets being careful to lookup next entry before
- * deleting the last
- */
+restart:
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry(starget, &shost->__targets, siblings) {
if (starget->state == STARGET_DEL)
continue;
if (starget->dev.parent == dev || &starget->dev == dev) {
- /* assuming new targets arrive at the end */
kref_get(&starget->reap_ref);
spin_unlock_irqrestore(shost->host_lock, flags);
- if (last)
- scsi_target_reap(last);
- last = starget;
__scsi_remove_target(starget);
- spin_lock_irqsave(shost->host_lock, flags);
+ scsi_target_reap(starget);
+ goto restart;
}
}
spin_unlock_irqrestore(shost->host_lock, flags);
-
- if (last)
- scsi_target_reap(last);
}
EXPORT_SYMBOL(scsi_remove_target);
buffer_data[2] &= ~0x05;
buffer_data[2] |= wce << 2 | rcd;
sp = buffer_data[0] & 0x80 ? 1 : 0;
+ buffer_data[0] &= ~0x80;
if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
SD_MAX_RETRIES, &data, &sshdr)) {
return k; /* probably out of space --> ENOMEM */
}
if (atomic_read(&sdp->detaching)) {
- if (srp->bio)
+ if (srp->bio) {
+ if (srp->rq->cmd != srp->rq->__cmd)
+ kfree(srp->rq->cmd);
+
blk_end_request_all(srp->rq, -EIO);
+ srp->rq = NULL;
+ }
+
sg_finish_rem_req(srp);
return -ENODEV;
}
.sg_tablesize = SNIC_MAX_SG_DESC_CNT,
.max_sectors = 0x800,
.shost_attrs = snic_attrs,
- .use_blk_tags = 1,
.track_queue_depth = 1,
.cmd_size = sizeof(struct snic_internal_io_state),
.proc_name = "snic_scsi",
snic->max_tag_id = shost->can_queue;
- ret = scsi_init_shared_tag_map(shost, snic->max_tag_id);
- if (ret) {
- SNIC_HOST_ERR(shost,
- "Unable to alloc shared tag map. %d\n",
- ret);
-
- goto err_dev_close;
- }
-
shost->max_lun = snic->config.luns_per_tgt;
shost->max_id = SNIC_MAX_TARGET;
}
static DRIVER_ATTR_RO(version);
+#if DEBUG
+static ssize_t debug_flag_store(struct device_driver *ddp,
+ const char *buf, size_t count)
+{
+/* We only care what the first byte of the data is the rest is unused.
+ * if it's a '1' we turn on debug and if it's a '0' we disable it. All
+ * other values have -EINVAL returned if they are passed in.
+ */
+ if (count > 0) {
+ if (buf[0] == '0') {
+ debugging = NO_DEBUG;
+ return count;
+ } else if (buf[0] == '1') {
+ debugging = 1;
+ return count;
+ }
+ }
+ return -EINVAL;
+}
+
+static ssize_t debug_flag_show(struct device_driver *ddp, char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", debugging);
+}
+static DRIVER_ATTR_RW(debug_flag);
+#endif
+
static struct attribute *st_drv_attrs[] = {
&driver_attr_try_direct_io.attr,
&driver_attr_fixed_buffer_size.attr,
&driver_attr_max_sg_segs.attr,
&driver_attr_version.attr,
+#if DEBUG
+ &driver_attr_debug_flag.attr,
+#endif
NULL,
};
ATTRIBUTE_GROUPS(st_drv);
#include <linux/types.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/ktime.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
MODULE_LICENSE("GPL");
MODULE_VERSION(ST_DRIVER_VERSION);
-static void stex_gettime(__le64 *time)
-{
- struct timeval tv;
-
- do_gettimeofday(&tv);
- *time = cpu_to_le64(tv.tv_sec);
-}
-
static struct status_msg *stex_get_status(struct st_hba *hba)
{
struct status_msg *status = hba->status_buffer + hba->status_tail;
h->req_cnt = cpu_to_le16(hba->rq_count+1);
h->status_sz = cpu_to_le16(sizeof(struct status_msg));
h->status_cnt = cpu_to_le16(hba->sts_count+1);
- stex_gettime(&h->hosttime);
+ h->hosttime = cpu_to_le64(ktime_get_real_seconds());
h->partner_type = HMU_PARTNER_TYPE;
if (hba->extra_offset) {
h->extra_offset = cpu_to_le32(hba->extra_offset);
h->req_cnt = cpu_to_le16(hba->rq_count+1);
h->status_sz = cpu_to_le16(sizeof(struct status_msg));
h->status_cnt = cpu_to_le16(hba->sts_count+1);
- stex_gettime(&h->hosttime);
+ h->hosttime = cpu_to_le64(ktime_get_real_seconds());
h->partner_type = HMU_PARTNER_TYPE;
h->extra_offset = h->extra_size = 0;
scratch_size = (hba->sts_count+1)*sizeof(u32);
.eh_abort_handler = stex_abort,
.eh_host_reset_handler = stex_reset,
.this_id = -1,
- .use_blk_tags = 1,
};
static struct pci_device_id stex_pci_tbl[] = {
if (err)
goto out_free_irq;
- err = scsi_init_shared_tag_map(host, host->can_queue);
- if (err) {
- printk(KERN_ERR DRV_NAME "(%s): init shared queue failed\n",
- pci_name(pdev));
- goto out_free_irq;
- }
-
pci_set_drvdata(pdev, hba);
err = scsi_add_host(host, &pdev->dev);
*/
#define SRB_STATUS_AUTOSENSE_VALID 0x80
+#define SRB_STATUS_QUEUE_FROZEN 0x40
#define SRB_STATUS_INVALID_LUN 0x20
#define SRB_STATUS_SUCCESS 0x01
#define SRB_STATUS_ABORTED 0x02
#define SRB_STATUS_ERROR 0x04
+#define SRB_STATUS(status) \
+ (status & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN))
/*
* This is the end of Protocol specific defines.
*/
struct storvsc_cmd_request {
struct scsi_cmnd *cmd;
- unsigned int bounce_sgl_count;
- struct scatterlist *bounce_sgl;
-
struct hv_device *device;
/* Synchronize the request/response if needed */
}
-static void destroy_bounce_buffer(struct scatterlist *sgl,
- unsigned int sg_count)
-{
- int i;
- struct page *page_buf;
-
- for (i = 0; i < sg_count; i++) {
- page_buf = sg_page((&sgl[i]));
- if (page_buf != NULL)
- __free_page(page_buf);
- }
-
- kfree(sgl);
-}
-
-static int do_bounce_buffer(struct scatterlist *sgl, unsigned int sg_count)
-{
- int i;
-
- /* No need to check */
- if (sg_count < 2)
- return -1;
-
- /* We have at least 2 sg entries */
- for (i = 0; i < sg_count; i++) {
- if (i == 0) {
- /* make sure 1st one does not have hole */
- if (sgl[i].offset + sgl[i].length != PAGE_SIZE)
- return i;
- } else if (i == sg_count - 1) {
- /* make sure last one does not have hole */
- if (sgl[i].offset != 0)
- return i;
- } else {
- /* make sure no hole in the middle */
- if (sgl[i].length != PAGE_SIZE || sgl[i].offset != 0)
- return i;
- }
- }
- return -1;
-}
-
-static struct scatterlist *create_bounce_buffer(struct scatterlist *sgl,
- unsigned int sg_count,
- unsigned int len,
- int write)
-{
- int i;
- int num_pages;
- struct scatterlist *bounce_sgl;
- struct page *page_buf;
- unsigned int buf_len = ((write == WRITE_TYPE) ? 0 : PAGE_SIZE);
-
- num_pages = ALIGN(len, PAGE_SIZE) >> PAGE_SHIFT;
-
- bounce_sgl = kcalloc(num_pages, sizeof(struct scatterlist), GFP_ATOMIC);
- if (!bounce_sgl)
- return NULL;
-
- sg_init_table(bounce_sgl, num_pages);
- for (i = 0; i < num_pages; i++) {
- page_buf = alloc_page(GFP_ATOMIC);
- if (!page_buf)
- goto cleanup;
- sg_set_page(&bounce_sgl[i], page_buf, buf_len, 0);
- }
-
- return bounce_sgl;
-
-cleanup:
- destroy_bounce_buffer(bounce_sgl, num_pages);
- return NULL;
-}
-
-/* Assume the original sgl has enough room */
-static unsigned int copy_from_bounce_buffer(struct scatterlist *orig_sgl,
- struct scatterlist *bounce_sgl,
- unsigned int orig_sgl_count,
- unsigned int bounce_sgl_count)
-{
- int i;
- int j = 0;
- unsigned long src, dest;
- unsigned int srclen, destlen, copylen;
- unsigned int total_copied = 0;
- unsigned long bounce_addr = 0;
- unsigned long dest_addr = 0;
- unsigned long flags;
- struct scatterlist *cur_dest_sgl;
- struct scatterlist *cur_src_sgl;
-
- local_irq_save(flags);
- cur_dest_sgl = orig_sgl;
- cur_src_sgl = bounce_sgl;
- for (i = 0; i < orig_sgl_count; i++) {
- dest_addr = (unsigned long)
- kmap_atomic(sg_page(cur_dest_sgl)) +
- cur_dest_sgl->offset;
- dest = dest_addr;
- destlen = cur_dest_sgl->length;
-
- if (bounce_addr == 0)
- bounce_addr = (unsigned long)kmap_atomic(
- sg_page(cur_src_sgl));
-
- while (destlen) {
- src = bounce_addr + cur_src_sgl->offset;
- srclen = cur_src_sgl->length - cur_src_sgl->offset;
-
- copylen = min(srclen, destlen);
- memcpy((void *)dest, (void *)src, copylen);
-
- total_copied += copylen;
- cur_src_sgl->offset += copylen;
- destlen -= copylen;
- dest += copylen;
-
- if (cur_src_sgl->offset == cur_src_sgl->length) {
- /* full */
- kunmap_atomic((void *)bounce_addr);
- j++;
-
- /*
- * It is possible that the number of elements
- * in the bounce buffer may not be equal to
- * the number of elements in the original
- * scatter list. Handle this correctly.
- */
-
- if (j == bounce_sgl_count) {
- /*
- * We are done; cleanup and return.
- */
- kunmap_atomic((void *)(dest_addr -
- cur_dest_sgl->offset));
- local_irq_restore(flags);
- return total_copied;
- }
-
- /* if we need to use another bounce buffer */
- if (destlen || i != orig_sgl_count - 1) {
- cur_src_sgl = sg_next(cur_src_sgl);
- bounce_addr = (unsigned long)
- kmap_atomic(
- sg_page(cur_src_sgl));
- }
- } else if (destlen == 0 && i == orig_sgl_count - 1) {
- /* unmap the last bounce that is < PAGE_SIZE */
- kunmap_atomic((void *)bounce_addr);
- }
- }
-
- kunmap_atomic((void *)(dest_addr - cur_dest_sgl->offset));
- cur_dest_sgl = sg_next(cur_dest_sgl);
- }
-
- local_irq_restore(flags);
-
- return total_copied;
-}
-
-/* Assume the bounce_sgl has enough room ie using the create_bounce_buffer() */
-static unsigned int copy_to_bounce_buffer(struct scatterlist *orig_sgl,
- struct scatterlist *bounce_sgl,
- unsigned int orig_sgl_count)
-{
- int i;
- int j = 0;
- unsigned long src, dest;
- unsigned int srclen, destlen, copylen;
- unsigned int total_copied = 0;
- unsigned long bounce_addr = 0;
- unsigned long src_addr = 0;
- unsigned long flags;
- struct scatterlist *cur_src_sgl;
- struct scatterlist *cur_dest_sgl;
-
- local_irq_save(flags);
-
- cur_src_sgl = orig_sgl;
- cur_dest_sgl = bounce_sgl;
-
- for (i = 0; i < orig_sgl_count; i++) {
- src_addr = (unsigned long)
- kmap_atomic(sg_page(cur_src_sgl)) +
- cur_src_sgl->offset;
- src = src_addr;
- srclen = cur_src_sgl->length;
-
- if (bounce_addr == 0)
- bounce_addr = (unsigned long)
- kmap_atomic(sg_page(cur_dest_sgl));
-
- while (srclen) {
- /* assume bounce offset always == 0 */
- dest = bounce_addr + cur_dest_sgl->length;
- destlen = PAGE_SIZE - cur_dest_sgl->length;
-
- copylen = min(srclen, destlen);
- memcpy((void *)dest, (void *)src, copylen);
-
- total_copied += copylen;
- cur_dest_sgl->length += copylen;
- srclen -= copylen;
- src += copylen;
-
- if (cur_dest_sgl->length == PAGE_SIZE) {
- /* full..move to next entry */
- kunmap_atomic((void *)bounce_addr);
- bounce_addr = 0;
- j++;
- }
-
- /* if we need to use another bounce buffer */
- if (srclen && bounce_addr == 0) {
- cur_dest_sgl = sg_next(cur_dest_sgl);
- bounce_addr = (unsigned long)
- kmap_atomic(
- sg_page(cur_dest_sgl));
- }
-
- }
-
- kunmap_atomic((void *)(src_addr - cur_src_sgl->offset));
- cur_src_sgl = sg_next(cur_src_sgl);
- }
-
- if (bounce_addr)
- kunmap_atomic((void *)bounce_addr);
-
- local_irq_restore(flags);
-
- return total_copied;
-}
-
static void handle_sc_creation(struct vmbus_channel *new_sc)
{
struct hv_device *device = new_sc->primary_channel->device_obj;
void (*process_err_fn)(struct work_struct *work);
bool do_work = false;
- switch (vm_srb->srb_status) {
+ switch (SRB_STATUS(vm_srb->srb_status)) {
case SRB_STATUS_ERROR:
/*
* If there is an error; offline the device since all
host = stor_dev->host;
vm_srb = &cmd_request->vstor_packet.vm_srb;
- if (cmd_request->bounce_sgl_count) {
- if (vm_srb->data_in == READ_TYPE)
- copy_from_bounce_buffer(scsi_sglist(scmnd),
- cmd_request->bounce_sgl,
- scsi_sg_count(scmnd),
- cmd_request->bounce_sgl_count);
- destroy_bounce_buffer(cmd_request->bounce_sgl,
- cmd_request->bounce_sgl_count);
- }
scmnd->result = vm_srb->scsi_status;
blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ));
+ /* Ensure there are no gaps in presented sgls */
+ blk_queue_virt_boundary(sdevice->request_queue, PAGE_SIZE - 1);
+
sdevice->no_write_same = 1;
/*
vm_srb->win8_extension.time_out_value = 60;
vm_srb->win8_extension.srb_flags |=
- (SRB_FLAGS_QUEUE_ACTION_ENABLE |
- SRB_FLAGS_DISABLE_SYNCH_TRANSFER);
+ SRB_FLAGS_DISABLE_SYNCH_TRANSFER;
/* Build the SRB */
switch (scmnd->sc_data_direction) {
payload_sz = sizeof(cmd_request->mpb);
if (sg_count) {
- /* check if we need to bounce the sgl */
- if (do_bounce_buffer(sgl, scsi_sg_count(scmnd)) != -1) {
- cmd_request->bounce_sgl =
- create_bounce_buffer(sgl, sg_count,
- length,
- vm_srb->data_in);
- if (!cmd_request->bounce_sgl)
- return SCSI_MLQUEUE_HOST_BUSY;
-
- cmd_request->bounce_sgl_count =
- ALIGN(length, PAGE_SIZE) >> PAGE_SHIFT;
-
- if (vm_srb->data_in == WRITE_TYPE)
- copy_to_bounce_buffer(sgl,
- cmd_request->bounce_sgl, sg_count);
-
- sgl = cmd_request->bounce_sgl;
- sg_count = cmd_request->bounce_sgl_count;
- }
-
-
if (sg_count > MAX_PAGE_BUFFER_COUNT) {
payload_sz = (sg_count * sizeof(void *) +
sizeof(struct vmbus_packet_mpb_array));
payload = kmalloc(payload_sz, GFP_ATOMIC);
- if (!payload) {
- if (cmd_request->bounce_sgl_count)
- destroy_bounce_buffer(
- cmd_request->bounce_sgl,
- cmd_request->bounce_sgl_count);
-
- return SCSI_MLQUEUE_DEVICE_BUSY;
- }
+ if (!payload)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
}
payload->range.len = length;
if (ret == -EAGAIN) {
/* no more space */
-
- if (cmd_request->bounce_sgl_count)
- destroy_bounce_buffer(cmd_request->bounce_sgl,
- cmd_request->bounce_sgl_count);
-
return SCSI_MLQUEUE_DEVICE_BUSY;
}
If unsure, say N.
config SCSI_UFS_QCOM
- bool "QCOM specific hooks to UFS controller platform driver"
+ tristate "QCOM specific hooks to UFS controller platform driver"
depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
select PHY_QCOM_UFS
help
#include <linux/phy/phy-qcom-ufs.h>
#include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
#include "unipro.h"
#include "ufs-qcom.h"
#include "ufshci.h"
+#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \
+ (UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
+
+enum {
+ TSTBUS_UAWM,
+ TSTBUS_UARM,
+ TSTBUS_TXUC,
+ TSTBUS_RXUC,
+ TSTBUS_DFC,
+ TSTBUS_TRLUT,
+ TSTBUS_TMRLUT,
+ TSTBUS_OCSC,
+ TSTBUS_UTP_HCI,
+ TSTBUS_COMBINED,
+ TSTBUS_WRAPPER,
+ TSTBUS_UNIPRO,
+ TSTBUS_MAX,
+};
static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
-static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result);
-static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
- const char *speed_mode);
static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
+static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+ u32 clk_cycles);
+
+static void ufs_qcom_dump_regs(struct ufs_hba *hba, int offset, int len,
+ char *prefix)
+{
+ print_hex_dump(KERN_ERR, prefix,
+ len > 4 ? DUMP_PREFIX_OFFSET : DUMP_PREFIX_NONE,
+ 16, 4, (void __force *)hba->mmio_base + offset,
+ len * 4, false);
+}
static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes)
{
err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
&host->tx_l1_sync_clk);
+
out:
return err;
}
static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
u32 tx_lanes;
int err = 0;
do {
err = ufshcd_dme_get(hba,
- UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &tx_fsm_val);
if (err || tx_fsm_val == TX_FSM_HIBERN8)
break;
*/
if (time_after(jiffies, timeout))
err = ufshcd_dme_get(hba,
- UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &tx_fsm_val);
if (err) {
dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
return err;
}
+static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
+{
+ ufshcd_rmwl(host->hba, QUNIPRO_SEL,
+ ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
+ REG_UFS_CFG1);
+ /* make sure above configuration is applied before we return */
+ mb();
+}
+
static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
int ret = 0;
bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
usleep_range(1000, 1100);
ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
+
if (ret) {
- dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
- __func__, ret);
+ dev_err(hba->dev,
+ "%s: ufs_qcom_phy_calibrate_phy()failed, ret = %d\n",
+ __func__, ret);
goto out;
}
ret = ufs_qcom_phy_is_pcs_ready(phy);
if (ret)
- dev_err(hba->dev, "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
+ dev_err(hba->dev,
+ "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
__func__, ret);
+ ufs_qcom_select_unipro_mode(host);
+
out:
return ret;
}
mb();
}
-static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
+static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
int err = 0;
switch (status) {
}
/**
- * Returns non-zero for success (which rate of core_clk) and 0
- * in case of a failure
+ * Returns zero for success and non-zero in case of a failure
*/
-static unsigned long
-ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
+static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
+ u32 hs, u32 rate, bool update_link_startup_timer)
{
- struct ufs_qcom_host *host = hba->priv;
+ int ret = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct ufs_clk_info *clki;
u32 core_clk_period_in_ns;
u32 tx_clk_cycles_per_us = 0;
static u32 hs_fr_table_rA[][2] = {
{UFS_HS_G1, 0x1F},
{UFS_HS_G2, 0x3e},
+ {UFS_HS_G3, 0x7D},
};
static u32 hs_fr_table_rB[][2] = {
{UFS_HS_G1, 0x24},
{UFS_HS_G2, 0x49},
+ {UFS_HS_G3, 0x92},
};
/*
core_clk_rate = DEFAULT_CLK_RATE_HZ;
core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
- ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+ if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) {
+ ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+ /*
+ * make sure above write gets applied before we return from
+ * this function.
+ */
+ mb();
+ }
+
+ if (ufs_qcom_cap_qunipro(host))
+ goto out;
core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
goto out_error;
}
- /* this register 2 fields shall be written at once */
- ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
- REG_UFS_TX_SYMBOL_CLK_NS_US);
+ if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) !=
+ (core_clk_period_in_ns | tx_clk_cycles_per_us)) {
+ /* this register 2 fields shall be written at once */
+ ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
+ REG_UFS_TX_SYMBOL_CLK_NS_US);
+ /*
+ * make sure above write gets applied before we return from
+ * this function.
+ */
+ mb();
+ }
+
+ if (update_link_startup_timer) {
+ ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
+ REG_UFS_PA_LINK_STARTUP_TIMER);
+ /*
+ * make sure that this configuration is applied before
+ * we return
+ */
+ mb();
+ }
goto out;
out_error:
- core_clk_rate = 0;
+ ret = -EINVAL;
out:
- return core_clk_rate;
+ return ret;
}
-static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status)
+static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
{
- unsigned long core_clk_rate = 0;
- u32 core_clk_cycles_per_100ms;
+ int err = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
switch (status) {
case PRE_CHANGE:
- core_clk_rate = ufs_qcom_cfg_timers(hba, UFS_PWM_G1,
- SLOWAUTO_MODE, 0);
- if (!core_clk_rate) {
+ if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
+ 0, true)) {
dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
__func__);
- return -EINVAL;
+ err = -EINVAL;
+ goto out;
}
- core_clk_cycles_per_100ms =
- (core_clk_rate / MSEC_PER_SEC) * 100;
- ufshcd_writel(hba, core_clk_cycles_per_100ms,
- REG_UFS_PA_LINK_STARTUP_TIMER);
+
+ if (ufs_qcom_cap_qunipro(host))
+ /*
+ * set unipro core clock cycles to 150 & clear clock
+ * divider
+ */
+ err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
+ 150);
+
break;
case POST_CHANGE:
ufs_qcom_link_startup_post_change(hba);
break;
}
- return 0;
+out:
+ return err;
}
static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
int ret = 0;
* If UniPro link is not active, PHY ref_clk, main PHY analog power
* rail and low noise analog power rail for PLL can be switched off.
*/
- if (!ufs_qcom_is_link_active(hba))
+ if (!ufs_qcom_is_link_active(hba)) {
+ ufs_qcom_disable_lane_clks(host);
phy_power_off(phy);
+ }
out:
return ret;
static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
int err;
goto out;
}
+ err = ufs_qcom_enable_lane_clks(host);
+ if (err)
+ goto out;
+
hba->is_sys_suspended = false;
out:
return 0;
}
+#ifdef CONFIG_MSM_BUS_SCALING
+static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
+ const char *speed_mode)
+{
+ struct device *dev = host->hba->dev;
+ struct device_node *np = dev->of_node;
+ int err;
+ const char *key = "qcom,bus-vector-names";
+
+ if (!speed_mode) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
+ err = of_property_match_string(np, key, "MAX");
+ else
+ err = of_property_match_string(np, key, speed_mode);
+
+out:
+ if (err < 0)
+ dev_err(dev, "%s: Invalid %s mode %d\n",
+ __func__, speed_mode, err);
+ return err;
+}
+
+static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
+{
+ int gear = max_t(u32, p->gear_rx, p->gear_tx);
+ int lanes = max_t(u32, p->lane_rx, p->lane_tx);
+ int pwr;
+
+ /* default to PWM Gear 1, Lane 1 if power mode is not initialized */
+ if (!gear)
+ gear = 1;
+
+ if (!lanes)
+ lanes = 1;
+
+ if (!p->pwr_rx && !p->pwr_tx) {
+ pwr = SLOWAUTO_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
+ } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
+ p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
+ pwr = FAST_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
+ p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
+ } else {
+ pwr = SLOW_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
+ "PWM", gear, lanes);
+ }
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+ int err = 0;
+
+ if (vote != host->bus_vote.curr_vote) {
+ err = msm_bus_scale_client_update_request(
+ host->bus_vote.client_handle, vote);
+ if (err) {
+ dev_err(host->hba->dev,
+ "%s: msm_bus_scale_client_update_request() failed: bus_client_handle=0x%x, vote=%d, err=%d\n",
+ __func__, host->bus_vote.client_handle,
+ vote, err);
+ goto out;
+ }
+
+ host->bus_vote.curr_vote = vote;
+ }
+out:
+ return err;
+}
+
static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
{
int vote;
return err;
}
+static ssize_t
+show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ host->bus_vote.is_max_bw_needed);
+}
+
+static ssize_t
+store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ uint32_t value;
+
+ if (!kstrtou32(buf, 0, &value)) {
+ host->bus_vote.is_max_bw_needed = !!value;
+ ufs_qcom_update_bus_bw_vote(host);
+ }
+
+ return count;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+ int err;
+ struct msm_bus_scale_pdata *bus_pdata;
+ struct device *dev = host->hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct device_node *np = dev->of_node;
+
+ bus_pdata = msm_bus_cl_get_pdata(pdev);
+ if (!bus_pdata) {
+ dev_err(dev, "%s: failed to get bus vectors\n", __func__);
+ err = -ENODATA;
+ goto out;
+ }
+
+ err = of_property_count_strings(np, "qcom,bus-vector-names");
+ if (err < 0 || err != bus_pdata->num_usecases) {
+ dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ host->bus_vote.client_handle = msm_bus_scale_register_client(bus_pdata);
+ if (!host->bus_vote.client_handle) {
+ dev_err(dev, "%s: msm_bus_scale_register_client failed\n",
+ __func__);
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* cache the vote index for minimum and maximum bandwidth */
+ host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
+ host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
+
+ host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
+ host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
+ sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
+ host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
+ host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
+ err = device_create_file(dev, &host->bus_vote.max_bus_bw);
+out:
+ return err;
+}
+#else /* CONFIG_MSM_BUS_SCALING */
+static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+ return 0;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+#endif /* CONFIG_MSM_BUS_SCALING */
+
+static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
+{
+ if (host->dev_ref_clk_ctrl_mmio &&
+ (enable ^ host->is_dev_ref_clk_enabled)) {
+ u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio);
+
+ if (enable)
+ temp |= host->dev_ref_clk_en_mask;
+ else
+ temp &= ~host->dev_ref_clk_en_mask;
+
+ /*
+ * If we are here to disable this clock it might be immediately
+ * after entering into hibern8 in which case we need to make
+ * sure that device ref_clk is active at least 1us after the
+ * hibern8 enter.
+ */
+ if (!enable)
+ udelay(1);
+
+ writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);
+
+ /* ensure that ref_clk is enabled/disabled before we return */
+ wmb();
+
+ /*
+ * If we call hibern8 exit after this, we need to make sure that
+ * device ref_clk is stable for at least 1us before the hibern8
+ * exit command.
+ */
+ if (enable)
+ udelay(1);
+
+ host->is_dev_ref_clk_enabled = enable;
+ }
+}
+
static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
- bool status,
+ enum ufs_notify_change_status status,
struct ufs_pa_layer_attr *dev_max_params,
struct ufs_pa_layer_attr *dev_req_params)
{
u32 val;
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
struct ufs_qcom_dev_params ufs_qcom_cap;
int ret = 0;
ufs_qcom_cap.desired_working_mode =
UFS_QCOM_LIMIT_DESIRED_MODE;
+ if (host->hw_ver.major == 0x1) {
+ /*
+ * HS-G3 operations may not reliably work on legacy QCOM
+ * UFS host controller hardware even though capability
+ * exchange during link startup phase may end up
+ * negotiating maximum supported gear as G3.
+ * Hence downgrade the maximum supported gear to HS-G2.
+ */
+ if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2)
+ ufs_qcom_cap.hs_tx_gear = UFS_HS_G2;
+ if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2)
+ ufs_qcom_cap.hs_rx_gear = UFS_HS_G2;
+ }
+
ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
dev_max_params,
dev_req_params);
break;
case POST_CHANGE:
- if (!ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+ if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
dev_req_params->pwr_rx,
- dev_req_params->hs_rate)) {
+ dev_req_params->hs_rate, false)) {
dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
__func__);
/*
static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
if (host->hw_ver.major == 0x1)
return UFSHCI_VERSION_11;
*/
static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
if (host->hw_ver.major == 0x01) {
hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001)
hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR;
+
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
}
if (host->hw_ver.major >= 0x2) {
- hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION;
if (!ufs_qcom_cap_qunipro(host))
static void ufs_qcom_set_caps(struct ufs_hba *hba)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- if (host->hw_ver.major >= 0x2)
- host->caps = UFS_QCOM_CAP_QUNIPRO;
-}
-
-static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
- const char *speed_mode)
-{
- struct device *dev = host->hba->dev;
- struct device_node *np = dev->of_node;
- int err;
- const char *key = "qcom,bus-vector-names";
-
- if (!speed_mode) {
- err = -EINVAL;
- goto out;
- }
-
- if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
- err = of_property_match_string(np, key, "MAX");
- else
- err = of_property_match_string(np, key, speed_mode);
-
-out:
- if (err < 0)
- dev_err(dev, "%s: Invalid %s mode %d\n",
- __func__, speed_mode, err);
- return err;
-}
-
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
-{
- int err = 0;
-
- if (vote != host->bus_vote.curr_vote)
- host->bus_vote.curr_vote = vote;
-
- return err;
-}
-
-static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
-{
- int gear = max_t(u32, p->gear_rx, p->gear_tx);
- int lanes = max_t(u32, p->lane_rx, p->lane_tx);
- int pwr;
-
- /* default to PWM Gear 1, Lane 1 if power mode is not initialized */
- if (!gear)
- gear = 1;
-
- if (!lanes)
- lanes = 1;
+ hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+ hba->caps |= UFSHCD_CAP_CLK_SCALING;
+ hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
- if (!p->pwr_rx && !p->pwr_tx) {
- pwr = SLOWAUTO_MODE;
- snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
- } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
- p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
- pwr = FAST_MODE;
- snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
- p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
- } else {
- pwr = SLOW_MODE;
- snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
- "PWM", gear, lanes);
+ if (host->hw_ver.major >= 0x2) {
+ host->caps = UFS_QCOM_CAP_QUNIPRO |
+ UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE;
}
}
+/**
+ * ufs_qcom_setup_clocks - enables/disable clocks
+ * @hba: host controller instance
+ * @on: If true, enable clocks else disable them.
+ *
+ * Returns 0 on success, non-zero on failure.
+ */
static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
{
- struct ufs_qcom_host *host = hba->priv;
- int err = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err;
int vote = 0;
/*
ufs_qcom_phy_disable_iface_clk(host->generic_phy);
goto out;
}
- /* enable the device ref clock */
- ufs_qcom_phy_enable_dev_ref_clk(host->generic_phy);
vote = host->bus_vote.saved_vote;
if (vote == host->bus_vote.min_bw_vote)
ufs_qcom_update_bus_bw_vote(host);
+
} else {
+
/* M-PHY RMMI interface clocks can be turned off */
ufs_qcom_phy_disable_iface_clk(host->generic_phy);
- if (!ufs_qcom_is_link_active(hba)) {
- /* turn off UFS local PHY ref_clk */
- ufs_qcom_phy_disable_ref_clk(host->generic_phy);
+ if (!ufs_qcom_is_link_active(hba))
/* disable device ref_clk */
- ufs_qcom_phy_disable_dev_ref_clk(host->generic_phy);
- }
+ ufs_qcom_dev_ref_clk_ctrl(host, false);
+
vote = host->bus_vote.min_bw_vote;
}
return err;
}
-static ssize_t
-show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct ufs_hba *hba = dev_get_drvdata(dev);
- struct ufs_qcom_host *host = hba->priv;
-
- return snprintf(buf, PAGE_SIZE, "%u\n",
- host->bus_vote.is_max_bw_needed);
-}
-
-static ssize_t
-store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct ufs_hba *hba = dev_get_drvdata(dev);
- struct ufs_qcom_host *host = hba->priv;
- uint32_t value;
-
- if (!kstrtou32(buf, 0, &value)) {
- host->bus_vote.is_max_bw_needed = !!value;
- ufs_qcom_update_bus_bw_vote(host);
- }
-
- return count;
-}
-
-static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
-{
- int err;
- struct device *dev = host->hba->dev;
- struct device_node *np = dev->of_node;
-
- err = of_property_count_strings(np, "qcom,bus-vector-names");
- if (err < 0 ) {
- dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
- __func__, err);
- goto out;
- }
-
- /* cache the vote index for minimum and maximum bandwidth */
- host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
- host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
-
- host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
- host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
- sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
- host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
- host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
- err = device_create_file(dev, &host->bus_vote.max_bus_bw);
-out:
- return err;
-}
-
#define ANDROID_BOOT_DEV_MAX 30
static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
-static int get_android_boot_dev(char *str)
+
+#ifndef MODULE
+static int __init get_android_boot_dev(char *str)
{
strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
return 1;
}
__setup("androidboot.bootdevice=", get_android_boot_dev);
+#endif
/**
* ufs_qcom_init - bind phy with controller
{
int err;
struct device *dev = hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
struct ufs_qcom_host *host;
+ struct resource *res;
if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
return -ENODEV;
goto out;
}
+ /* Make a two way bind between the qcom host and the hba */
host->hba = hba;
- hba->priv = (void *)host;
+ ufshcd_set_variant(hba, host);
+ /*
+ * voting/devoting device ref_clk source is time consuming hence
+ * skip devoting it during aggressive clock gating. This clock
+ * will still be gated off during runtime suspend.
+ */
host->generic_phy = devm_phy_get(dev, "ufsphy");
if (IS_ERR(host->generic_phy)) {
ufs_qcom_get_controller_revision(hba, &host->hw_ver.major,
&host->hw_ver.minor, &host->hw_ver.step);
+ /*
+ * for newer controllers, device reference clock control bit has
+ * moved inside UFS controller register address space itself.
+ */
+ if (host->hw_ver.major >= 0x02) {
+ host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1;
+ host->dev_ref_clk_en_mask = BIT(26);
+ } else {
+ /* "dev_ref_clk_ctrl_mem" is optional resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res) {
+ host->dev_ref_clk_ctrl_mmio =
+ devm_ioremap_resource(dev, res);
+ if (IS_ERR(host->dev_ref_clk_ctrl_mmio)) {
+ dev_warn(dev,
+ "%s: could not map dev_ref_clk_ctrl_mmio, err %ld\n",
+ __func__,
+ PTR_ERR(host->dev_ref_clk_ctrl_mmio));
+ host->dev_ref_clk_ctrl_mmio = NULL;
+ }
+ host->dev_ref_clk_en_mask = BIT(5);
+ }
+ }
+
/* update phy revision information before calling phy_init() */
ufs_qcom_phy_save_controller_version(host->generic_phy,
host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
ufs_qcom_set_caps(hba);
ufs_qcom_advertise_quirks(hba);
- hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_CLK_SCALING;
- hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
-
ufs_qcom_setup_clocks(hba, true);
if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
ufs_qcom_hosts[hba->dev->id] = host;
+ host->dbg_print_en |= UFS_QCOM_DEFAULT_DBG_PRINT_EN;
+ ufs_qcom_get_default_testbus_cfg(host);
+ err = ufs_qcom_testbus_config(host);
+ if (err) {
+ dev_warn(dev, "%s: failed to configure the testbus %d\n",
+ __func__, err);
+ err = 0;
+ }
+
goto out;
out_disable_phy:
phy_exit(host->generic_phy);
out_host_free:
devm_kfree(dev, host);
- hba->priv = NULL;
+ ufshcd_set_variant(hba, NULL);
out:
return err;
}
static void ufs_qcom_exit(struct ufs_hba *hba)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
ufs_qcom_disable_lane_clks(host);
phy_power_off(host->generic_phy);
}
-static
-void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+ u32 clk_cycles)
+{
+ int err;
+ u32 core_clk_ctrl_reg;
+
+ if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
+ return -EINVAL;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ &core_clk_ctrl_reg);
+ if (err)
+ goto out;
+
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
+ core_clk_ctrl_reg |= clk_cycles;
+
+ /* Clear CORE_CLK_DIV_EN */
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ core_clk_ctrl_reg);
+out:
+ return err;
+}
+
+static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
+{
+ /* nothing to do as of now */
+ return 0;
+}
+
+static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ /* set unipro core clock cycles to 150 and clear clock divider */
+ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
+}
+
+static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err;
+ u32 core_clk_ctrl_reg;
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ &core_clk_ctrl_reg);
+
+ /* make sure CORE_CLK_DIV_EN is cleared */
+ if (!err &&
+ (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ core_clk_ctrl_reg);
+ }
+
+ return err;
+}
+
+static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ /* set unipro core clock cycles to 75 and clear clock divider */
+ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
+}
+
+static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
+ bool scale_up, enum ufs_notify_change_status status)
{
- struct ufs_qcom_host *host = hba->priv;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
+ int err = 0;
- if (!dev_req_params)
- return;
+ if (status == PRE_CHANGE) {
+ if (scale_up)
+ err = ufs_qcom_clk_scale_up_pre_change(hba);
+ else
+ err = ufs_qcom_clk_scale_down_pre_change(hba);
+ } else {
+ if (scale_up)
+ err = ufs_qcom_clk_scale_up_post_change(hba);
+ else
+ err = ufs_qcom_clk_scale_down_post_change(hba);
- ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
- dev_req_params->pwr_rx,
- dev_req_params->hs_rate);
+ if (err || !dev_req_params)
+ goto out;
+
+ ufs_qcom_cfg_timers(hba,
+ dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate,
+ false);
+ ufs_qcom_update_bus_bw_vote(host);
+ }
+
+out:
+ return err;
}
+static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
+{
+ /* provide a legal default configuration */
+ host->testbus.select_major = TSTBUS_UAWM;
+ host->testbus.select_minor = 1;
+}
+
+static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host)
+{
+ if (host->testbus.select_major >= TSTBUS_MAX) {
+ dev_err(host->hba->dev,
+ "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n",
+ __func__, host->testbus.select_major);
+ return false;
+ }
+
+ /*
+ * Not performing check for each individual select_major
+ * mappings of select_minor, since there is no harm in
+ * configuring a non-existent select_minor
+ */
+ if (host->testbus.select_minor > 0x1F) {
+ dev_err(host->hba->dev,
+ "%s: 0x%05X is not a legal testbus option\n",
+ __func__, host->testbus.select_minor);
+ return false;
+ }
+
+ return true;
+}
+
+int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
+{
+ int reg;
+ int offset;
+ u32 mask = TEST_BUS_SUB_SEL_MASK;
+
+ if (!host)
+ return -EINVAL;
+
+ if (!ufs_qcom_testbus_cfg_is_ok(host))
+ return -EPERM;
+
+ switch (host->testbus.select_major) {
+ case TSTBUS_UAWM:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 24;
+ break;
+ case TSTBUS_UARM:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 16;
+ break;
+ case TSTBUS_TXUC:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 8;
+ break;
+ case TSTBUS_RXUC:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 0;
+ break;
+ case TSTBUS_DFC:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 24;
+ break;
+ case TSTBUS_TRLUT:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 16;
+ break;
+ case TSTBUS_TMRLUT:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 8;
+ break;
+ case TSTBUS_OCSC:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 0;
+ break;
+ case TSTBUS_WRAPPER:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 16;
+ break;
+ case TSTBUS_COMBINED:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 8;
+ break;
+ case TSTBUS_UTP_HCI:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 0;
+ break;
+ case TSTBUS_UNIPRO:
+ reg = UFS_UNIPRO_CFG;
+ offset = 1;
+ break;
+ /*
+ * No need for a default case, since
+ * ufs_qcom_testbus_cfg_is_ok() checks that the configuration
+ * is legal
+ */
+ }
+ mask <<= offset;
+
+ pm_runtime_get_sync(host->hba->dev);
+ ufshcd_hold(host->hba, false);
+ ufshcd_rmwl(host->hba, TEST_BUS_SEL,
+ (u32)host->testbus.select_major << 19,
+ REG_UFS_CFG1);
+ ufshcd_rmwl(host->hba, mask,
+ (u32)host->testbus.select_minor << offset,
+ reg);
+ ufshcd_release(host->hba);
+ pm_runtime_put_sync(host->hba->dev);
+
+ return 0;
+}
+
+static void ufs_qcom_testbus_read(struct ufs_hba *hba)
+{
+ ufs_qcom_dump_regs(hba, UFS_TEST_BUS, 1, "UFS_TEST_BUS ");
+}
+
+static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
+{
+ ufs_qcom_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16,
+ "HCI Vendor Specific Registers ");
+
+ ufs_qcom_testbus_read(hba);
+}
/**
* struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
*
* The variant operations configure the necessary controller and PHY
* handshake during initialization.
*/
-static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
.name = "qcom",
.init = ufs_qcom_init,
.exit = ufs_qcom_exit,
.pwr_change_notify = ufs_qcom_pwr_change_notify,
.suspend = ufs_qcom_suspend,
.resume = ufs_qcom_resume,
+ .dbg_register_dump = ufs_qcom_dump_dbg_regs,
+};
+
+/**
+ * ufs_qcom_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Return zero for success and non-zero for failure
+ */
+static int ufs_qcom_probe(struct platform_device *pdev)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+
+ /* Perform generic probe */
+ err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
+ if (err)
+ dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+ return err;
+}
+
+/**
+ * ufs_qcom_remove - set driver_data of the device to NULL
+ * @pdev: pointer to platform device handle
+ *
+ * Always return 0
+ */
+static int ufs_qcom_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&(pdev)->dev);
+ ufshcd_remove(hba);
+ return 0;
+}
+
+static const struct of_device_id ufs_qcom_of_match[] = {
+ { .compatible = "qcom,ufshc"},
+ {},
+};
+
+static const struct dev_pm_ops ufs_qcom_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
};
-EXPORT_SYMBOL(ufs_hba_qcom_vops);
+
+static struct platform_driver ufs_qcom_pltform = {
+ .probe = ufs_qcom_probe,
+ .remove = ufs_qcom_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "ufshcd-qcom",
+ .pm = &ufs_qcom_pm_ops,
+ .of_match_table = of_match_ptr(ufs_qcom_of_match),
+ },
+};
+module_platform_driver(ufs_qcom_pltform);
+
+MODULE_LICENSE("GPL v2");
#define UFS_QCOM_LIMIT_NUM_LANES_RX 2
#define UFS_QCOM_LIMIT_NUM_LANES_TX 2
-#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G2
-#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G2
+#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G3
+#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G3
#define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4
#define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4
#define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE
REG_UFS_CFG2 = 0xE0,
REG_UFS_HW_VERSION = 0xE4,
+ UFS_TEST_BUS = 0xE8,
+ UFS_TEST_BUS_CTRL_0 = 0xEC,
+ UFS_TEST_BUS_CTRL_1 = 0xF0,
+ UFS_TEST_BUS_CTRL_2 = 0xF4,
+ UFS_UNIPRO_CFG = 0xF8,
+
+ /*
+ * QCOM UFS host controller vendor specific registers
+ * added in HW Version 3.0.0
+ */
+ UFS_AH8_CFG = 0xFC,
+};
+
+/* QCOM UFS host controller vendor specific debug registers */
+enum {
UFS_DBG_RD_REG_UAWM = 0x100,
UFS_DBG_RD_REG_UARM = 0x200,
UFS_DBG_RD_REG_TXUC = 0x300,
UFS_UFS_DBG_RD_EDTL_RAM = 0x1900,
};
+#define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x) (0x000 + x)
+#define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x)
+
+/* bit definitions for REG_UFS_CFG1 register */
+#define QUNIPRO_SEL UFS_BIT(0)
+#define TEST_BUS_EN BIT(18)
+#define TEST_BUS_SEL GENMASK(22, 19)
+
/* bit definitions for REG_UFS_CFG2 register */
#define UAWM_HW_CGC_EN (1 << 0)
#define UARM_HW_CGC_EN (1 << 1)
#define TMRLUT_HW_CGC_EN (1 << 6)
#define OCSC_HW_CGC_EN (1 << 7)
+/* bit definition for UFS_UFS_TEST_BUS_CTRL_n */
+#define TEST_BUS_SUB_SEL_MASK 0x1F /* All XXX_SEL fields are 5 bits wide */
+
#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
UFS_PHY_INIT_CFG_RESTORE,
};
+/* QCOM UFS debug print bit mask */
+#define UFS_QCOM_DBG_PRINT_REGS_EN BIT(0)
+#define UFS_QCOM_DBG_PRINT_ICE_REGS_EN BIT(1)
+#define UFS_QCOM_DBG_PRINT_TEST_BUS_EN BIT(2)
+
+#define UFS_QCOM_DBG_PRINT_ALL \
+ (UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_ICE_REGS_EN | \
+ UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
+
+/* QUniPro Vendor specific attributes */
+#define DME_VS_CORE_CLK_CTRL 0xD002
+/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
+#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8)
+#define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK 0xFF
+
static inline void
ufs_qcom_get_controller_revision(struct ufs_hba *hba,
u8 *major, u16 *minor, u16 *step)
u16 minor;
u8 major;
};
-struct ufs_qcom_host {
+struct ufs_qcom_testbus {
+ u8 select_major;
+ u8 select_minor;
+};
+
+struct ufs_qcom_host {
/*
* Set this capability if host controller supports the QUniPro mode
* and if driver wants the Host controller to operate in QUniPro mode.
* controller supports the QUniPro mode.
*/
#define UFS_QCOM_CAP_QUNIPRO UFS_BIT(0)
+
+ /*
+ * Set this capability if host controller can retain the secure
+ * configuration even after UFS controller core power collapse.
+ */
+ #define UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE UFS_BIT(1)
u32 caps;
struct phy *generic_phy;
struct clk *tx_l1_sync_clk;
bool is_lane_clks_enabled;
+ void __iomem *dev_ref_clk_ctrl_mmio;
+ bool is_dev_ref_clk_enabled;
struct ufs_hw_version hw_ver;
+
+ u32 dev_ref_clk_en_mask;
+
+ /* Bitmask for enabling debug prints */
+ u32 dbg_print_en;
+ struct ufs_qcom_testbus testbus;
};
#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
+int ufs_qcom_testbus_config(struct ufs_qcom_host *host);
+
static inline bool ufs_qcom_cap_qunipro(struct ufs_qcom_host *host)
{
if (host->caps & UFS_QCOM_CAP_QUNIPRO)
#include <linux/of.h>
#include "ufshcd.h"
-
-static const struct of_device_id ufs_of_match[];
-static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
-{
- if (dev->of_node) {
- const struct of_device_id *match;
-
- match = of_match_node(ufs_of_match, dev->of_node);
- if (match)
- return (struct ufs_hba_variant_ops *)match->data;
- }
-
- return NULL;
-}
+#include "ufshcd-pltfrm.h"
static int ufshcd_parse_clock_info(struct ufs_hba *hba)
{
* Returns 0 if successful
* Returns non-zero otherwise
*/
-static int ufshcd_pltfrm_suspend(struct device *dev)
+int ufshcd_pltfrm_suspend(struct device *dev)
{
return ufshcd_system_suspend(dev_get_drvdata(dev));
}
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_suspend);
/**
* ufshcd_pltfrm_resume - resume power management function
* Returns 0 if successful
* Returns non-zero otherwise
*/
-static int ufshcd_pltfrm_resume(struct device *dev)
+int ufshcd_pltfrm_resume(struct device *dev)
{
return ufshcd_system_resume(dev_get_drvdata(dev));
}
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume);
-static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
+int ufshcd_pltfrm_runtime_suspend(struct device *dev)
{
return ufshcd_runtime_suspend(dev_get_drvdata(dev));
}
-static int ufshcd_pltfrm_runtime_resume(struct device *dev)
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_suspend);
+
+int ufshcd_pltfrm_runtime_resume(struct device *dev)
{
return ufshcd_runtime_resume(dev_get_drvdata(dev));
}
-static int ufshcd_pltfrm_runtime_idle(struct device *dev)
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_resume);
+
+int ufshcd_pltfrm_runtime_idle(struct device *dev)
{
return ufshcd_runtime_idle(dev_get_drvdata(dev));
}
-#else /* !CONFIG_PM */
-#define ufshcd_pltfrm_suspend NULL
-#define ufshcd_pltfrm_resume NULL
-#define ufshcd_pltfrm_runtime_suspend NULL
-#define ufshcd_pltfrm_runtime_resume NULL
-#define ufshcd_pltfrm_runtime_idle NULL
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle);
+
#endif /* CONFIG_PM */
-static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
+void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
{
ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
}
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown);
/**
- * ufshcd_pltfrm_probe - probe routine of the driver
+ * ufshcd_pltfrm_init - probe routine of the driver
* @pdev: pointer to Platform device handle
+ * @vops: pointer to variant ops
*
* Returns 0 on success, non-zero value on failure
*/
-static int ufshcd_pltfrm_probe(struct platform_device *pdev)
+int ufshcd_pltfrm_init(struct platform_device *pdev,
+ struct ufs_hba_variant_ops *vops)
{
struct ufs_hba *hba;
void __iomem *mmio_base;
goto out;
}
- hba->vops = get_variant_ops(&pdev->dev);
+ hba->vops = vops;
err = ufshcd_parse_clock_info(hba);
if (err) {
dev_err(&pdev->dev, "%s: clock parse failed %d\n",
__func__, err);
- goto out;
+ goto dealloc_host;
}
err = ufshcd_parse_regulator_info(hba);
if (err) {
dev_err(&pdev->dev, "%s: regulator init failed %d\n",
__func__, err);
- goto out;
+ goto dealloc_host;
}
pm_runtime_set_active(&pdev->dev);
out_disable_rpm:
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
+dealloc_host:
+ ufshcd_dealloc_host(hba);
out:
return err;
}
-
-/**
- * ufshcd_pltfrm_remove - remove platform driver routine
- * @pdev: pointer to platform device handle
- *
- * Returns 0 on success, non-zero value on failure
- */
-static int ufshcd_pltfrm_remove(struct platform_device *pdev)
-{
- struct ufs_hba *hba = platform_get_drvdata(pdev);
-
- pm_runtime_get_sync(&(pdev)->dev);
- ufshcd_remove(hba);
- return 0;
-}
-
-static const struct of_device_id ufs_of_match[] = {
- { .compatible = "jedec,ufs-1.1"},
- {},
-};
-
-static const struct dev_pm_ops ufshcd_dev_pm_ops = {
- .suspend = ufshcd_pltfrm_suspend,
- .resume = ufshcd_pltfrm_resume,
- .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
- .runtime_resume = ufshcd_pltfrm_runtime_resume,
- .runtime_idle = ufshcd_pltfrm_runtime_idle,
-};
-
-static struct platform_driver ufshcd_pltfrm_driver = {
- .probe = ufshcd_pltfrm_probe,
- .remove = ufshcd_pltfrm_remove,
- .shutdown = ufshcd_pltfrm_shutdown,
- .driver = {
- .name = "ufshcd",
- .pm = &ufshcd_dev_pm_ops,
- .of_match_table = ufs_of_match,
- },
-};
-
-module_platform_driver(ufshcd_pltfrm_driver);
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);
MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFSHCD_PLTFRM_H_
+#define UFSHCD_PLTFRM_H_
+
+#include "ufshcd.h"
+
+int ufshcd_pltfrm_init(struct platform_device *pdev,
+ struct ufs_hba_variant_ops *vops);
+void ufshcd_pltfrm_shutdown(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+
+int ufshcd_pltfrm_suspend(struct device *dev);
+int ufshcd_pltfrm_resume(struct device *dev);
+int ufshcd_pltfrm_runtime_suspend(struct device *dev);
+int ufshcd_pltfrm_runtime_resume(struct device *dev);
+int ufshcd_pltfrm_runtime_idle(struct device *dev);
+
+#else /* !CONFIG_PM */
+
+#define ufshcd_pltfrm_suspend NULL
+#define ufshcd_pltfrm_resume NULL
+#define ufshcd_pltfrm_runtime_suspend NULL
+#define ufshcd_pltfrm_runtime_resume NULL
+#define ufshcd_pltfrm_runtime_idle NULL
+
+#endif /* CONFIG_PM */
+
+#endif /* UFSHCD_PLTFRM_H_ */
*/
static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba)
{
- if (hba->quirks & UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION) {
- if (hba->vops && hba->vops->get_ufs_hci_version)
- return hba->vops->get_ufs_hci_version(hba);
- }
+ if (hba->quirks & UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION)
+ return ufshcd_vops_get_ufs_hci_version(hba);
return ufshcd_readl(hba, REG_UFS_VERSION);
}
out:
return rc;
}
+EXPORT_SYMBOL_GPL(ufshcd_hold);
static void ufshcd_gate_work(struct work_struct *work)
{
__ufshcd_release(hba);
spin_unlock_irqrestore(hba->host->host_lock, flags);
}
+EXPORT_SYMBOL_GPL(ufshcd_release);
static ssize_t ufshcd_clkgate_delay_show(struct device *dev,
struct device_attribute *attr, char *buf)
dev_err(hba->dev,
"%s: power mode change failed %d\n", __func__, ret);
} else {
- if (hba->vops && hba->vops->pwr_change_notify)
- hba->vops->pwr_change_notify(hba,
- POST_CHANGE, NULL, pwr_mode);
+ ufshcd_vops_pwr_change_notify(hba, POST_CHANGE, NULL,
+ pwr_mode);
memcpy(&hba->pwr_info, pwr_mode,
sizeof(struct ufs_pa_layer_attr));
struct ufs_pa_layer_attr final_params = { 0 };
int ret;
- if (hba->vops && hba->vops->pwr_change_notify)
- hba->vops->pwr_change_notify(hba,
- PRE_CHANGE, desired_pwr_mode, &final_params);
- else
+ ret = ufshcd_vops_pwr_change_notify(hba, PRE_CHANGE,
+ desired_pwr_mode, &final_params);
+
+ if (ret)
memcpy(&final_params, desired_pwr_mode, sizeof(final_params));
ret = ufshcd_change_power_mode(hba, &final_params);
/* UniPro link is disabled at this point */
ufshcd_set_link_off(hba);
- if (hba->vops && hba->vops->hce_enable_notify)
- hba->vops->hce_enable_notify(hba, PRE_CHANGE);
+ ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE);
/* start controller initialization sequence */
ufshcd_hba_start(hba);
/* enable UIC related interrupts */
ufshcd_enable_intr(hba, UFSHCD_UIC_MASK);
- if (hba->vops && hba->vops->hce_enable_notify)
- hba->vops->hce_enable_notify(hba, POST_CHANGE);
+ ufshcd_vops_hce_enable_notify(hba, POST_CHANGE);
return 0;
}
int retries = DME_LINKSTARTUP_RETRIES;
do {
- if (hba->vops && hba->vops->link_startup_notify)
- hba->vops->link_startup_notify(hba, PRE_CHANGE);
+ ufshcd_vops_link_startup_notify(hba, PRE_CHANGE);
ret = ufshcd_dme_link_startup(hba);
}
/* Include any host controller configuration via UIC commands */
- if (hba->vops && hba->vops->link_startup_notify) {
- ret = hba->vops->link_startup_notify(hba, POST_CHANGE);
- if (ret)
- goto out;
- }
+ ret = ufshcd_vops_link_startup_notify(hba, POST_CHANGE);
+ if (ret)
+ goto out;
ret = ufshcd_make_hba_operational(hba);
out:
.cmd_per_lun = UFSHCD_CMD_PER_LUN,
.can_queue = UFSHCD_CAN_QUEUE,
.max_host_blocked = 1,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
}
}
- if (hba->vops && hba->vops->setup_clocks)
- ret = hba->vops->setup_clocks(hba, on);
+ ret = ufshcd_vops_setup_clocks(hba, on);
out:
if (ret) {
list_for_each_entry(clki, head, list) {
if (!hba->vops)
goto out;
- if (hba->vops->init) {
- err = hba->vops->init(hba);
- if (err)
- goto out;
- }
+ err = ufshcd_vops_init(hba);
+ if (err)
+ goto out;
- if (hba->vops->setup_regulators) {
- err = hba->vops->setup_regulators(hba, true);
- if (err)
- goto out_exit;
- }
+ err = ufshcd_vops_setup_regulators(hba, true);
+ if (err)
+ goto out_exit;
goto out;
out_exit:
- if (hba->vops->exit)
- hba->vops->exit(hba);
+ ufshcd_vops_exit(hba);
out:
if (err)
dev_err(hba->dev, "%s: variant %s init failed err %d\n",
- __func__, hba->vops ? hba->vops->name : "", err);
+ __func__, ufshcd_get_var_name(hba), err);
return err;
}
if (!hba->vops)
return;
- if (hba->vops->setup_clocks)
- hba->vops->setup_clocks(hba, false);
+ ufshcd_vops_setup_clocks(hba, false);
- if (hba->vops->setup_regulators)
- hba->vops->setup_regulators(hba, false);
+ ufshcd_vops_setup_regulators(hba, false);
- if (hba->vops->exit)
- hba->vops->exit(hba);
+ ufshcd_vops_exit(hba);
}
static int ufshcd_hba_init(struct ufs_hba *hba)
* vendor specific host controller register space call them before the
* host clocks are ON.
*/
- if (hba->vops && hba->vops->suspend) {
- ret = hba->vops->suspend(hba, pm_op);
- if (ret)
- goto set_link_active;
- }
+ ret = ufshcd_vops_suspend(hba, pm_op);
+ if (ret)
+ goto set_link_active;
- if (hba->vops && hba->vops->setup_clocks) {
- ret = hba->vops->setup_clocks(hba, false);
- if (ret)
- goto vops_resume;
- }
+ ret = ufshcd_vops_setup_clocks(hba, false);
+ if (ret)
+ goto vops_resume;
if (!ufshcd_is_link_active(hba))
ufshcd_setup_clocks(hba, false);
hba->clk_gating.state = CLKS_OFF;
/*
* Disable the host irq as host controller as there won't be any
- * host controller trasanction expected till resume.
+ * host controller transaction expected till resume.
*/
ufshcd_disable_irq(hba);
/* Put the host controller in low power mode if possible */
goto out;
vops_resume:
- if (hba->vops && hba->vops->resume)
- hba->vops->resume(hba, pm_op);
+ ufshcd_vops_resume(hba, pm_op);
set_link_active:
ufshcd_vreg_set_hpm(hba);
if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba))
* vendor specific host controller register space call them when the
* host clocks are ON.
*/
- if (hba->vops && hba->vops->resume) {
- ret = hba->vops->resume(hba, pm_op);
- if (ret)
- goto disable_vreg;
- }
+ ret = ufshcd_vops_resume(hba, pm_op);
+ if (ret)
+ goto disable_vreg;
if (ufshcd_is_link_hibern8(hba)) {
ret = ufshcd_uic_hibern8_exit(hba);
set_old_link_state:
ufshcd_link_state_transition(hba, old_link_state, 0);
vendor_suspend:
- if (hba->vops && hba->vops->suspend)
- hba->vops->suspend(hba, pm_op);
+ ufshcd_vops_suspend(hba, pm_op);
disable_vreg:
ufshcd_vreg_set_lpm(hba);
disable_irq_and_vops_clks:
}
EXPORT_SYMBOL_GPL(ufshcd_remove);
+/**
+ * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA)
+ * @hba: pointer to Host Bus Adapter (HBA)
+ */
+void ufshcd_dealloc_host(struct ufs_hba *hba)
+{
+ scsi_host_put(hba->host);
+}
+EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
+
/**
* ufshcd_set_dma_mask - Set dma mask based on the controller
* addressing capability
if (!head || list_empty(head))
goto out;
+ ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
+ if (ret)
+ return ret;
+
list_for_each_entry(clki, head, list) {
if (!IS_ERR_OR_NULL(clki->clk)) {
if (scale_up && clki->max_freq) {
dev_dbg(hba->dev, "%s: clk: %s, rate: %lu\n", __func__,
clki->name, clk_get_rate(clki->clk));
}
- if (hba->vops->clk_scale_notify)
- hba->vops->clk_scale_notify(hba);
+
+ ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);
+
out:
return ret;
}
hba->is_irq_enabled = true;
}
- /* Enable SCSI tag mapping */
- err = scsi_init_shared_tag_map(host, host->can_queue);
- if (err) {
- dev_err(hba->dev, "init shared queue failed\n");
- goto exit_gating;
- }
-
err = scsi_add_host(host, hba->dev);
if (err) {
dev_err(hba->dev, "scsi_add_host failed\n");
bool enabled;
};
-#define PRE_CHANGE 0
-#define POST_CHANGE 1
+enum ufs_notify_change_status {
+ PRE_CHANGE,
+ POST_CHANGE,
+};
struct ufs_pa_layer_attr {
u32 gear_rx;
* to be set.
* @suspend: called during host controller PM callback
* @resume: called during host controller PM callback
+ * @dbg_register_dump: used to dump controller debug information
*/
struct ufs_hba_variant_ops {
const char *name;
int (*init)(struct ufs_hba *);
void (*exit)(struct ufs_hba *);
u32 (*get_ufs_hci_version)(struct ufs_hba *);
- void (*clk_scale_notify)(struct ufs_hba *);
- int (*setup_clocks)(struct ufs_hba *, bool);
+ int (*clk_scale_notify)(struct ufs_hba *, bool,
+ enum ufs_notify_change_status);
+ int (*setup_clocks)(struct ufs_hba *, bool);
int (*setup_regulators)(struct ufs_hba *, bool);
- int (*hce_enable_notify)(struct ufs_hba *, bool);
- int (*link_startup_notify)(struct ufs_hba *, bool);
+ int (*hce_enable_notify)(struct ufs_hba *,
+ enum ufs_notify_change_status);
+ int (*link_startup_notify)(struct ufs_hba *,
+ enum ufs_notify_change_status);
int (*pwr_change_notify)(struct ufs_hba *,
- bool, struct ufs_pa_layer_attr *,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *,
struct ufs_pa_layer_attr *);
int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
int (*resume)(struct ufs_hba *, enum ufs_pm_op);
+ void (*dbg_register_dump)(struct ufs_hba *hba);
};
/* clock gating state */
}
int ufshcd_alloc_host(struct device *, struct ufs_hba **);
+void ufshcd_dealloc_host(struct ufs_hba *);
int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
void ufshcd_remove(struct ufs_hba *);
GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
}
+/**
+ * ufshcd_set_variant - set variant specific data to the hba
+ * @hba - per adapter instance
+ * @variant - pointer to variant specific data
+ */
+static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
+{
+ BUG_ON(!hba);
+ hba->priv = variant;
+}
+
+/**
+ * ufshcd_get_variant - get variant specific data from the hba
+ * @hba - per adapter instance
+ */
+static inline void *ufshcd_get_variant(struct ufs_hba *hba)
+{
+ BUG_ON(!hba);
+ return hba->priv;
+}
+
extern int ufshcd_runtime_suspend(struct ufs_hba *hba);
extern int ufshcd_runtime_resume(struct ufs_hba *hba);
extern int ufshcd_runtime_idle(struct ufs_hba *hba);
int ufshcd_hold(struct ufs_hba *hba, bool async);
void ufshcd_release(struct ufs_hba *hba);
+
+/* Wrapper functions for safely calling variant operations */
+static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
+{
+ if (hba->vops)
+ return hba->vops->name;
+ return "";
+}
+
+static inline int ufshcd_vops_init(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->init)
+ return hba->vops->init(hba);
+
+ return 0;
+}
+
+static inline void ufshcd_vops_exit(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->exit)
+ return hba->vops->exit(hba);
+}
+
+static inline u32 ufshcd_vops_get_ufs_hci_version(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->get_ufs_hci_version)
+ return hba->vops->get_ufs_hci_version(hba);
+
+ return ufshcd_readl(hba, REG_UFS_VERSION);
+}
+
+static inline int ufshcd_vops_clk_scale_notify(struct ufs_hba *hba,
+ bool up, enum ufs_notify_change_status status)
+{
+ if (hba->vops && hba->vops->clk_scale_notify)
+ return hba->vops->clk_scale_notify(hba, up, status);
+ return 0;
+}
+
+static inline int ufshcd_vops_setup_clocks(struct ufs_hba *hba, bool on)
+{
+ if (hba->vops && hba->vops->setup_clocks)
+ return hba->vops->setup_clocks(hba, on);
+ return 0;
+}
+
+static inline int ufshcd_vops_setup_regulators(struct ufs_hba *hba, bool status)
+{
+ if (hba->vops && hba->vops->setup_regulators)
+ return hba->vops->setup_regulators(hba, status);
+
+ return 0;
+}
+
+static inline int ufshcd_vops_hce_enable_notify(struct ufs_hba *hba,
+ bool status)
+{
+ if (hba->vops && hba->vops->hce_enable_notify)
+ return hba->vops->hce_enable_notify(hba, status);
+
+ return 0;
+}
+static inline int ufshcd_vops_link_startup_notify(struct ufs_hba *hba,
+ bool status)
+{
+ if (hba->vops && hba->vops->link_startup_notify)
+ return hba->vops->link_startup_notify(hba, status);
+
+ return 0;
+}
+
+static inline int ufshcd_vops_pwr_change_notify(struct ufs_hba *hba,
+ bool status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ if (hba->vops && hba->vops->pwr_change_notify)
+ return hba->vops->pwr_change_notify(hba, status,
+ dev_max_params, dev_req_params);
+
+ return -ENOTSUPP;
+}
+
+static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum ufs_pm_op op)
+{
+ if (hba->vops && hba->vops->suspend)
+ return hba->vops->suspend(hba, op);
+
+ return 0;
+}
+
+static inline int ufshcd_vops_resume(struct ufs_hba *hba, enum ufs_pm_op op)
+{
+ if (hba->vops && hba->vops->resume)
+ return hba->vops->resume(hba, op);
+
+ return 0;
+}
+
+static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->dbg_register_dump)
+ hba->vops->dbg_register_dump(hba);
+}
+
#endif /* End of Header */
.use_clustering = DISABLE_CLUSTERING,
.slave_alloc = tcm_loop_slave_alloc,
.module = THIS_MODULE,
- .use_blk_tags = 1,
.track_queue_depth = 1,
};
.this_id = -1,
.sg_tablesize = SG_NONE,
.skip_settle_delay = 1,
- .use_blk_tags = 1,
};
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
if (result)
goto set_alt0;
- result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2);
- if (result)
- goto free_streams;
-
usb_set_intfdata(intf, shost);
result = scsi_add_host(shost, &intf->dev);
if (result)
/* If use block layer to manage tags, this is tag allocation policy */
int tag_alloc_policy;
- /*
- * Let the block layer assigns tags to all commands.
- */
- unsigned use_blk_tags:1;
-
/*
* Track QUEUE_FULL events and reduce queue depth on demand.
*/
#ifdef CONFIG_BLOCK
-static inline struct scsi_cmnd *scsi_mq_find_tag(struct Scsi_Host *shost,
- int unique_tag)
-{
- u16 hwq = blk_mq_unique_tag_to_hwq(unique_tag);
- struct request *req = NULL;
-
- if (hwq < shost->tag_set.nr_hw_queues)
- req = blk_mq_tag_to_rq(shost->tag_set.tags[hwq],
- blk_mq_unique_tag_to_tag(unique_tag));
- return req ? (struct scsi_cmnd *)req->special : NULL;
-}
-
-/**
- * scsi_find_tag - find a tagged command by device
- * @SDpnt: pointer to the ScSI device
- * @tag: tag generated by blk_mq_unique_tag()
- *
- * Notes:
- * Only works with tags allocated by the generic blk layer.
- **/
-static inline struct scsi_cmnd *scsi_find_tag(struct scsi_device *sdev, int tag)
-{
- struct request *req;
-
- if (tag != SCSI_NO_TAG) {
- if (shost_use_blk_mq(sdev->host))
- return scsi_mq_find_tag(sdev->host, tag);
-
- req = blk_queue_find_tag(sdev->request_queue, tag);
- return req ? (struct scsi_cmnd *)req->special : NULL;
- }
-
- /* single command, look in space */
- return sdev->current_cmnd;
-}
-
-
-/**
- * scsi_init_shared_tag_map - create a shared tag map
- * @shost: the host to share the tag map among all devices
- * @depth: the total depth of the map
- */
-static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth)
-{
- /*
- * We always have a shared tag map around when using blk-mq.
- */
- if (shost_use_blk_mq(shost))
- return 0;
-
- /*
- * If the shared tag map isn't already initialized, do it now.
- * This saves callers from having to check ->bqt when setting up
- * devices on the shared host (for libata)
- */
- if (!shost->bqt) {
- shost->bqt = blk_init_tags(depth,
- shost->hostt->tag_alloc_policy);
- if (!shost->bqt)
- return -ENOMEM;
- }
-
- return 0;
-}
-
/**
* scsi_host_find_tag - find the tagged command by host
* @shost: pointer to scsi_host
- * @tag: tag generated by blk_mq_unique_tag()
+ * @tag: tag
*
- * Notes:
- * Only works with tags allocated by the generic blk layer.
+ * Note: for devices using multiple hardware queues tag must have been
+ * generated by blk_mq_unique_tag().
**/
static inline struct scsi_cmnd *scsi_host_find_tag(struct Scsi_Host *shost,
- int tag)
+ int tag)
{
- struct request *req;
+ struct request *req = NULL;
- if (tag != SCSI_NO_TAG) {
- if (shost_use_blk_mq(shost))
- return scsi_mq_find_tag(shost, tag);
+ if (tag == SCSI_NO_TAG)
+ return NULL;
+
+ if (shost_use_blk_mq(shost)) {
+ u16 hwq = blk_mq_unique_tag_to_hwq(tag);
+
+ if (hwq < shost->tag_set.nr_hw_queues) {
+ req = blk_mq_tag_to_rq(shost->tag_set.tags[hwq],
+ blk_mq_unique_tag_to_tag(tag));
+ }
+ } else {
req = blk_map_queue_find_tag(shost->bqt, tag);
- return req ? (struct scsi_cmnd *)req->special : NULL;
}
- return NULL;
+
+ if (!req)
+ return NULL;
+ return req->special;
}
#endif /* CONFIG_BLOCK */
projects / karo-tx-linux.git / commitdiff