ARM: dts: add initial VF610 Tower board dts support

Add initial Freescale Vybrid VF610 Tower board support
with uart and fec enabled.

Signed-off-by: Jingchang Lu <b35083@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 80a4603857bbd27c1edeb53c1100df19ea696c29..d5b52f6d9ff08e596c43b11b726cdb34453e54eb 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -122,7 +122,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
        imx6q-sabrelite.dtb \
        imx6q-sabresd.dtb \
        imx6q-sbc6x.dtb \
-       imx6sl-evk.dtb
+       imx6sl-evk.dtb \
+       vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
        imx23-olinuxino.dtb \
        imx23-stmp378x_devb.dtb \

diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
new file mode 100644 (file)
index 0000000..b3905f5
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+       model = "VF610 Tower Board";
+       compatible = "fsl,vf610-twr", "fsl,vf610";
+
+       chosen {
+               bootargs = "console=ttyLP1,115200";
+       };
+
+       memory {
+               reg = <0x80000000 0x8000000>;
+       };
+
+       clocks {
+               audio_ext {
+                       compatible = "fixed-clock";
+                       clock-frequency = <24576000>;
+               };
+
+               enet_ext {
+                       compatible = "fixed-clock";
+                       clock-frequency = <50000000>;
+               };
+       };
+
+};
+
+&fec0 {
+       phy-mode = "rmii";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec0_1>;
+       status = "okay";
+};
+
+&fec1 {
+       phy-mode = "rmii";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec1_1>;
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1_1>;
+       status = "okay";
+};