}
+/*
+ * sanitize ONFI strings so we can safely print them
+ */
+static void sanitize_string(uint8_t *s, size_t len)
+{
+ ssize_t i;
+
+ /* null terminate */
+ s[len - 1] = 0;
+
+ /* remove non printable chars */
+ for (i = 0; i < len - 1; i++) {
+ if (s[i] < ' ' || s[i] > 127)
+ s[i] = '?';
+ }
+
+ /* remove trailing spaces */
+ strim(s);
+}
+
+static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
+{
+ int i;
+ while (len--) {
+ crc ^= *p++ << 8;
+ for (i = 0; i < 8; i++)
+ crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
+ }
+
+ return crc;
+}
+
/*
* Get the flash and manufacturer id and lookup if the type is supported
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
- int busw, int *maf_id,
+ int busw, int *maf_id, int *dev_id,
struct nand_flash_dev *type)
{
- int i, dev_id, maf_idx;
+ int i, maf_idx;
u8 id_data[8];
/* Select the device */
/* Read manufacturer and device IDs */
*maf_id = chip->read_byte(mtd);
- dev_id = chip->read_byte(mtd);
+ *dev_id = chip->read_byte(mtd);
/* Try again to make sure, as some systems the bus-hold or other
* interface concerns can cause random data which looks like a
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
- /* Read entire ID string */
-
- for (i = 0; i < 8; i++)
+ for (i = 0; i < 2; i++)
id_data[i] = chip->read_byte(mtd);
- if (id_data[0] != *maf_id || id_data[1] != dev_id) {
+ if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
printk(KERN_INFO "%s: second ID read did not match "
"%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, dev_id, id_data[0], id_data[1]);
+ *maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
type = nand_flash_ids;
for (; type->name != NULL; type++)
- if (dev_id == type->id)
+ if (*dev_id == type->id)
break;
+ chip->onfi_version = 0;
+ if (!type->name || !type->pagesize) {
+ /* try ONFI for unknow chip or LP */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
+ if (chip->read_byte(mtd) == 'O' &&
+ chip->read_byte(mtd) == 'N' &&
+ chip->read_byte(mtd) == 'F' &&
+ chip->read_byte(mtd) == 'I') {
+
+ struct nand_onfi_params *p = &chip->onfi_params;
+ int i;
+
+ printk(KERN_INFO "ONFI flash detected\n");
+ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+ for (i = 0; i < 3; i++) {
+ chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+ if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
+ le16_to_cpu(p->crc))
+ {
+ printk(KERN_INFO "ONFI param page %d valid\n", i);
+ break;
+ }
+ }
+
+ if (i < 3) {
+ /* check version */
+ int val = le16_to_cpu(p->revision);
+ if (val == 1 || val > (1 << 4))
+ printk(KERN_INFO "%s: unsupported ONFI version: %d\n",
+ __func__, val);
+ else {
+ if (val & (1 << 4))
+ chip->onfi_version = 22;
+ else if (val & (1 << 3))
+ chip->onfi_version = 21;
+ else if (val & (1 << 2))
+ chip->onfi_version = 20;
+ else
+ chip->onfi_version = 10;
+ }
+ }
+
+ if (chip->onfi_version) {
+ sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+ sanitize_string(p->model, sizeof(p->model));
+ if (!mtd->name)
+ mtd->name = p->model;
+ mtd->writesize = le32_to_cpu(p->byte_per_page);
+ mtd->erasesize = le32_to_cpu(p->pages_per_block)*mtd->writesize;
+ mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+ chip->chipsize = le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
+ busw = 0;
+ if (le16_to_cpu(p->features) & 1)
+ busw = NAND_BUSWIDTH_16;
+
+ chip->options &= ~NAND_CHIPOPTIONS_MSK;
+ chip->options |= (NAND_NO_READRDY |
+ NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK;
+
+ goto ident_done;
+
+ }
+ }
+ }
+
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+ /* Read entire ID string */
+
+ for (i = 0; i < 8; i++)
+ id_data[i] = chip->read_byte(mtd);
+
if (!type->name)
return ERR_PTR(-ENODEV);
mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
}
}
+ /* Get chip options, preserve non chip based options */
+ chip->options &= ~NAND_CHIPOPTIONS_MSK;
+ chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
+
+ /* Check if chip is a not a samsung device. Do not clear the
+ * options for chips which are not having an extended id.
+ */
+ if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+ chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ident_done:
+
+ /*
+ * Set chip as a default. Board drivers can override it, if necessary
+ */
+ chip->options |= NAND_NO_AUTOINCR;
/* Try to identify manufacturer */
for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
if (busw != (chip->options & NAND_BUSWIDTH_16)) {
printk(KERN_INFO "NAND device: Manufacturer ID:"
" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
- dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
(chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
busw ? 16 : 8);
else
chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
- /* Get chip options, preserve non chip based options */
- chip->options &= ~NAND_CHIPOPTIONS_MSK;
- chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
-
- /*
- * Set chip as a default. Board drivers can override it, if necessary
- */
- chip->options |= NAND_NO_AUTOINCR;
-
- /* Check if chip is a not a samsung device. Do not clear the
- * options for chips which are not having an extended id.
- */
- if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
- chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-
/*
* Bad block marker is stored in the last page of each block
* on Samsung and Hynix MLC devices; stored in first two pages
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
+ /* TODO onfi flash name */
printk(KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id,
- nand_manuf_ids[maf_idx].name, type->name);
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
+ nand_manuf_ids[maf_idx].name,
+ chip->onfi_version ? type->name:chip->onfi_params.model);
return type;
}
int nand_scan_ident(struct mtd_info *mtd, int maxchips,
struct nand_flash_dev *table)
{
- int i, busw, nand_maf_id;
+ int i, busw, nand_maf_id, nand_dev_id;
struct nand_chip *chip = mtd->priv;
struct nand_flash_dev *type;
nand_set_defaults(chip, busw);
/* Read the flash type */
- type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id, table);
+ type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id, &nand_dev_id, table);
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
/* Read manufacturer and device IDs */
if (nand_maf_id != chip->read_byte(mtd) ||
- type->id != chip->read_byte(mtd))
+ nand_dev_id != chip->read_byte(mtd))
break;
}
if (i > 1)
/* Keep gcc happy */
struct nand_chip;
+struct nand_onfi_params {
+ /* rev info and features block */
+ u8 sig[4]; /* 'O' 'N' 'F' 'I' */
+ __le16 revision;
+ __le16 features;
+ __le16 opt_cmd;
+ u8 reserved[22];
+
+ /* manufacturer information block */
+ char manufacturer[12];
+ char model[20];
+ u8 jedec_id;
+ __le16 date_code;
+ u8 reserved2[13];
+
+ /* memory organization block */
+ __le32 byte_per_page;
+ __le16 spare_bytes_per_page;
+ __le32 data_bytes_per_ppage;
+ __le16 spare_bytes_per_ppage;
+ __le32 pages_per_block;
+ __le32 blocks_per_lun;
+ u8 lun_count;
+ u8 addr_cycles;
+ u8 bits_per_cell;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 guaranteed_good_blocks;
+ __le16 guaranteed_block_endurance;
+ u8 programs_per_page;
+ u8 ppage_attr;
+ u8 ecc_bits;
+ u8 interleaved_bits;
+ u8 interleaved_ops;
+ u8 reserved3[13];
+
+ /* electrical parameter block */
+ u8 io_pin_capacitance_max;
+ __le16 async_timing_mode;
+ __le16 program_cache_timing_mode;
+ __le16 t_prog;
+ __le16 t_bers;
+ __le16 t_r;
+ __le16 t_ccs;
+ __le16 src_sync_timing_mode;
+ __le16 src_ssync_features;
+ __le16 clk_pin_capacitance_typ;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ u8 input_pin_capacitance_max;
+ u8 driver_strenght_support;
+ __le16 t_int_r;
+ __le16 t_ald;
+ u8 reserved4[7];
+
+ /* vendor */
+ u8 reserved5[90];
+
+ __le16 crc;
+} __attribute__((packed));
+
+#define ONFI_CRC_BASE 0x4F4E
+
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
* @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf
* @subpagesize: [INTERN] holds the subpagesize
+ * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded), non 0 if ONFI supported
+ * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is supported, 0 otherwise
* @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup
int badblockpos;
int badblockbits;
+ int onfi_version;
+ struct nand_onfi_params onfi_params;
+
flstate_t state;
uint8_t *oob_poi;
projects / mv-sheeva.git / commitdiff