1 ======================================================================
2 Changes for U-Boot 1.1.4:
3 ======================================================================
5 * Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
6 The COPYING file was extended to make clear that these files can be
7 used in non-GPL code, too.
9 * Add support for Prodrive P3P440 board:
10 - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
11 - CFG_FLASH_QUIET_TEST added to use the common CFI driver
12 for bank autodetection
13 Patch by Stefan Roese, 22 Nov 2005
15 * Change all '$(...)' variable references into '${...}'
16 which makes the environment compatible with the hush shell.
17 WARNING: Support for the old '$(...)' syntax will be
18 discontinued in a later version.
20 * Minor changes to init flags in TQM834x PCI.
22 * Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
23 Patch by Stefan Roese, 15 Nov 2005
25 * New PPC 405EP board added: CMS700
26 Added CONFIG_NET_MULTI for VOM405 board.
27 Added reset_phy() for VOM405 board.
28 Patch by Matthias Fuchs, 09 Nov 2005
30 * Updated PCI mapping for esd CPCI2DP board.
31 Add support for error LED.
32 Patch by Matthias Fuchs, 07 Nov 2005
34 * Fix MPC85xx PCI support (pci_register_hose() before pci config access)
35 Patch by Stefan Roese, 07 Nov 2005
37 * Correct PPC Timebase register definitions (SPRN_TBRL...)
38 Patch by Stefan Roese, 07 Nov 2005
40 * Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
41 Patch by Stefan Roese, 05 Nov 2005
43 * Additional fix for external IRQ config on Yellowstone & Yosemite
44 Patch by Stefan Roese, 03 Nov 2005
46 * Add support for Ocotea pass 3 with 440GX Rev. F
47 Patch by Stefan Roese, 01 Nov 2005
49 * Fix external IRQ configuration on Yellowstone & Yosemite
50 Patch by Stefan Roese, 28 Oct 2005
52 * Add support for multiple PHYs.
53 Tested on the following boards:
54 cmcpu2 (at91rm9200/ether.c)
55 PPChameleon (ppc4xx/4xx_enet.c)
58 tqm834x (mpc834x/tsec.c) with EEPRO100
59 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
62 - miiphy_register routine was added to allow multiple PHYs to be registered
63 - miiphy_read and miiphy_write are now defined in this file, and
64 require additional argument (char *devname)
65 - other miiphy_* routines also require additional device name argument
68 Calling reset_phy() was moved to be executed *after* eth_initialize().
69 This is necessary as now some of the implementations of reset_phy()
70 may need to use miiphy_reset() which is not allowed before eth_initialize()
71 as eth_initialize registers all required miiphy_* routines.
72 Tested on IP860 and PHY initializes properly after this change.
74 * Correct includes for flat tree builder.
76 * Fix conflicting types (flash_write()) in trab auto_update.c.
78 * Add PCI support for the TQM834x board.
80 * Add missing 4xx board to MAKEALL
81 Patch by Stefan Roese, 20 Oct 2005
83 * Fix conflicting types (flash_write()) in esd auto_update.c
84 Patch by Stefan Roese, 20 Oct 2005
86 * Fix problem with sleep in NetConsole (use get_timer())
87 Patch by Stefan Roese, 20 Oct 2005
89 * Add NetConsole Support for AMCC eval boards
90 Patch by Stefan Roese, 20 Oct 2005
92 * Fix NetConsole support on 4xx (only print eth link on 1st transfer)
93 Patch by Stefan Roese, 18 Oct 2005
95 * Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
96 Fix identation on ext2ls help entry.
97 Patch by Stefan Roese, 14 Oct 2005
99 * Add support for TQM834x boards.
102 * Cleanup for GCC-4.x
104 * Add documentation for Open Firmware Flat Tree and usage.
105 Patch by Pantelis Antoniou, 13 Oct 2005
107 * Add missing files for Pantelis Antoniou's patch
108 Patch by Pantelis Antoniou, 04 Sep 2005
110 * Fix problem in ppc4xx eth-driver without ethaddr (only without
111 CONFIG_NET_MULTI set)
112 Patch by Stefan Roese, 10 Oct 2005
114 * Fix gzip bmp support (test if malloc fails, warning when truncated).
115 Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
116 Patch by Stefan Roese, 07 Oct 2005
118 * Add support for OF flat tree for the STXtc board.
119 Patch by Pantelis Antoniou, 04 Sep 2005
121 * Support passing of OF flat trees to the kernel.
122 Patch by Pantelis Antoniou, 04 Sep 2005
126 * Add support for NetSilicon NS7520 processor.
127 Patch by Art Shipkowski, 12 May 2005
129 * Add support for AP1000 board.
130 Patch by James MacAulay, 07 Oct 2005
132 * Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
133 Patch by Anders Larsen, 07 Oct 2005
135 The Atmel errata #11 states that the transfer buffer descriptor
136 table must be aligned on a 16-word boundary. As it turned out, this
137 is insufficient - it seems the table must be aligned on a boundary
138 at least as large as the table itself (in Linux this is not an
139 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
141 * Fixed compilation for ARM when using a (standard) hard-FP toolchain
142 Patch by Anders Larsen, 07 Oct 2005
144 * Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
145 sed the linker scripts, rather than pre-process them.
146 Patch by Peter Pearse, 07 Oct 2005
148 * Update make target for ARM supported boards.
149 Use lowlevel_init() instead of platformsetup() [rename].
150 Patch by Peter Pearse, 06 Oct 2005
152 * Fix booting from serial dataflash on AT91RM9200
153 Patch by Peter Menzebach, 29 Aug 2005
155 * Add JFFS2 support for TRAB board
156 Patch by Martin Krause, 25 Aug 2005
158 * Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
159 Patch by Marcus Hall, 24 Aug 2005
161 * Fix the machine-id of the Cogent csb637 board
162 Patch by Anders Larsen, 05 Oct 2005
164 * Complete support for the KwikByte KB920x boards
165 Patch by Anders Larsen, 05 Oct 2005
167 * Set the AT91RM9200 clock to asynchronous mode
168 Patch by Anders Larsen, 03 May 2005
170 * Set the AT91RM9200 clock to synchronous mode
171 Patch by Anders Larsen, 29 Apr 2005
173 * Add support for Cogent csb637
174 Patch by Anders Larsen, 29 Apr 2005
176 * Fix dm9161.c initialization
177 Patch by Anders Larsen, 29 Apr 2005
179 * Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
180 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
182 * Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
183 Patch by Anders Larsen, 29 Apr 2005
185 * Fix device partition intialization for SystemACE disks.
186 Patch by Stephen Williams, 28 Apr 2005
188 * Added support for KwikByte KB920x boards (based on AT91RM9200)
189 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
191 * Add support for S29GL064M-R3 flash chip on xsengine board
192 Patch by Kurt Stremerch, 18 Apr 2005
194 * E500 update: repoint IVPR to RAM when code is relocated
195 Patch by Kylo Ginsberg, 13 Apr 2005
197 * Fix loop end test in lib_generic/string.c:strswab()
198 Patch by Andrew Dyer, October 10, 2005
199 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
203 * Update ARM Integrator boards:
204 Correct addessing errors in platform files.
205 Split off common core module data from Integrator header files to
206 include/armcoremodule.h.
207 Patch by Peter Pearse, 04 Oct 2005
209 * Make sure only supported compiler options are used
210 Import "cc-option" shell function from kernel and
211 use it to get the correct ARM GCC options for individual CPUs
212 Patch by Peter Pearse, 30 Jun 2005
214 * Fix 440GR to print correct cpu revision
215 Patch by Stefan Roese, 04 Oct 2005
217 * Change board message on AMCC Yosemite & Yellowstone to common style
218 Patch by Stefan Roese, 03 Oct 2005
220 * Fix compiler warning
222 * Fix FEC PHY addresses for TQM85xx boards
224 * Fix uninitialized variable problem in hush shell
225 Patch by Lars Rostock, 26 Sep 2005
227 * Undo change of f6e20fc6ca... to include/configs/trab.h
228 (Must have been an accident?)
230 * Add support for AT91RM9200 OHCI Controller.
231 Patch by Eric Benard, 07 Apr 2005
233 * Update ARM mach-types.h
234 Patch by Eric Benard, 07 Apr 2005
236 * Add support for MP2USB board.
237 Patch by Eric Benard, 07 Apr 2005
239 * Add board support for armadillo HT1070
240 Patch by Rowel Atienza, 06 Apr 2005
242 * Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
243 Patch by Vitaly Bordug, 30 Mar 2005
245 * Add iopset command on mpc8xx
246 Patch by Daniel Eisenhut, 25 Mar 2005
248 * Add support for MII in eepro100 driver.
249 Patch by Gleb Natapov, 21 Mar 2005
251 * Fixes to the Lubbock (PXA 25x) support:
252 - Resolve the FIXME with respect to saving the u-boot environment.
253 - Make the default load address land in real memory.
254 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
255 Patch by David Brownell, 10 Mar 2005
257 * Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
258 Patch by Marc Leeman, 04 Mar 2005
260 * OMAP242x H4 board update
261 - fix for ES2 differences.
262 - switch to using the cfi_flash driver.
263 - fix SRAM build address.
264 - fix for GP device operation.
265 - unlock SRAM for GP devices.
266 - display more device information.
267 - fix potential deadlock in omap24xx_i2c driver.
268 - fix DLL load values to match dpllout*1 operation.
269 - fix 2nd chip select init for combo DDR device.
270 - add support for CFI Intel 28F256L18 on H4 board.
271 Patch by Richard Woodruff, 03 Mar 2005
273 * Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
274 Patch by Steven Scholz, 02 Mar 2005
277 Patch by Ara Avanesyan, 24 Feb 2005
279 * Remove unneeded #include <malloc.h>
280 Patch by Ladislav Michl, 22 Feb 2005
282 * Add cramfs support for m68k
283 Patch by Zachary Landau, 21 Feb 2005
285 * Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
286 Patch by Jeff Angielski, 21 Feb 2005
288 * Fix au1x00_serial baud rate calculation:
289 remove hardcoded cpu clock divisor and use register instead;
290 round up instead of truncate
291 Patch by Andrew Dyer, 15 Feb 2005
293 * Add Xilinx Spartan3 family FPGA support
294 Patch by Kurt Stremerch, 14 Feb 2005
296 * Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
297 Patch by Zachary Landau, 11 Feb 2005
300 Patch by Matthias Fuchs, 25 Sep 2005
302 * Added support for PCI bridge on MPC8272ADS
303 Patch by Vitaly Bordug, Feb 09 2005
305 * Update multicore CM9XX support for Integrator AP to allow booting from flash
306 Patch by Jean-Paul Saman, 8 Feb 2005
308 * Fix strswab() to reliably find end of string
309 Patch by Andrew Dyer, 08 Feb 2005
311 * Fix typos in include/ppc440.h
312 Patch by Andrew E Mileski, 04 Feb 2005
314 * Add Vibren (was Accelent) PXA255 IDP Support
315 Patch by Cliff Brake, 04 Feb 2005
317 * Fix tools/bmp_logo.c using incorrect offset to pixel data
318 Patch by Andrew Dyer, 31 Jan 2005
320 * Add ARM946E cpu and core module targets; remap memory to 0x00000000
321 Patch by Peter Pearse, 2 Feb 2005
323 * Fix error handling in tools/env/fw_env.c
324 Patch by Ara Avanesyan, 01 Feb 2005
326 * Fix MGT5100 PSC baudrate calculation
327 Patch by Sebastian Schau, 27 Jan 2005
329 * OMAP242x fix for GP device booting
330 - Add SRAM unlock for GP devices.
331 - Change DDR DLL unlock value to allow DPLLout*1 operation.
332 Patches by Richard Woodruff, 21 Jan 2005:
334 * Add support for AMD's Pb1x00 eval board;
335 add MII routines to the au1x00 ethernet driver;
336 add USB ohci driver (work in progress)
337 Patch by Thomas Sailer, 20 Jan 2005
339 * Update omap5912osk board
340 Use drivers/cfi_flash.c instead of private flash driver;
341 Remove hardcoded personalized settings from omap5912osk.h;
342 Fix spacing with (RO) marks in 'flinfo' output.
343 Patch by Michael Bendzick, 14 Jan 2005
345 * Fix warnings for PCI code on ixp
346 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
348 * virtex2 fix for bogus download error messages
349 The virtex2 FPGA download code watches for init going active during
350 a download of config data as an error condition. init also goes
351 active after a configuration is finished in concert with the done
352 signal. So far, the code does not check for done active until all
353 of the configuration data is sent. If configuration data has a few
354 extra pad bytes at the end, this would cause an error message even
355 though the download had suceeded.
356 NOTE: virtex2 slave serial and spartan2 versions may still have the
358 Patch by Andrew Dyer, 12 Jan 2005
360 * Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
361 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
362 message when probing for nonexistent flash in little endian mode.
363 As a side effect more efficient and smaller code is generated,
364 which is always a Good Thing (TM).
365 Patch by Ladislav Michl, 24 Sep 2005
367 * Update for TFTP using a fixed UDP port
368 Use the approved environment variable names. Added "tftpdstp" to
369 allow ports other than 69 per Tolunay Orkun's recommendation.
370 Patch by Jerry Van Baren, 12 Jan 2005
372 * Allow to force TFTP to use a fixed UDP port
373 (Add a configuration option CONFIG_TFTP_PORT and optional env
375 Patch by Jerry Van Baren, 10 Jan 2005
377 * Fix ethernet timeouts on dbau1550 and other au1x00 systems
378 Patch by Leif Lindholm, 29 Dec 2004
380 * Cleanup: fix broken builds
382 * Fix PHY address argument passing with mii info command
383 Patch by Andrew Dyer, 28 Dec 2004
385 * Cleanup (PPC4xx is AMCC now)
387 * esd CPCI2DP board added
388 Patch by Matthias Fuchs, 22 Sep 2005
390 * esd PMC405 board updated
391 Patch by Matthias Fuchs, 22 Sep 2005
393 * Add SM501 support to HH405 board.
394 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
395 Add support for eeprom write-enable (CFG_EEPROM_WREN).
396 Patch by Stefan Roese, 22 Sep 2005
398 * Fix autonegotiation in tsec ethernet driver
399 Patch by Stefan Roese, 21 Sep 2005
401 * Fix bug in auto_update (trab board)
402 Patch by Martin Krause, 16 Sep 2005
404 * Fix computation of framebuffer palette for 8bpp LCD bitmaps
405 Patch by Francesco Mandracci, 16 Sep 2005
407 * Update configuration for INKA4x0 board
409 * Update configuration for PM854 board
410 Based on patch by R. Loeffl, 20 Jul 2005
412 * Add PCI support to TQM8540 and TQM8560 boards
413 Patch by Stefan Roese, 15 Sep 2005
415 * Update AMCC Yosemite to get a consistent setup for all AMCC eval
416 boards (baudrate, environment...). Flash driver fixed.
417 Patch by Stefan Roese, 15 Sep 2005
419 * Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
420 ethernet port on ebony.
421 Patch by Stefan Roese, 7 Sep 2005
423 * Added support for mtddevnum and mtddevname variables (mtdparts command)
425 * Change default console baud rate for stxxtc board
427 * Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
428 Patch by Stefan Roese, 31 Aug 2005
430 * Fix default command set (don't include CFG_CMD_DISPLAY command)
431 Patch by Pantelis Antoniou, 02 Sep 2005
435 * Enable SM712 driver support for HMI1001 board.
437 * Fix problems with ld version 2.16 (dot outside sections problem)
438 Pointed out by Gerhard Jaeger, 31 Aug 2005;
439 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
441 * Prepare U-Boot for gcc-4.x: fix global data pointer initialization
443 * Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
445 * Add keyboard and dot matrix display support for HMI1001 board.
447 * Prepare U-Boot for gcc-4.x
449 * Fixed Bamboo port to enable running without DDR-DIMM
450 (Bamboo has also 64MB onboard DDR)
451 Patch by Stefan Roese, 24 Aug 2005
453 * Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
454 now handling all 4xx cpu's
455 Patch by Stefan Roese, 16 Aug 2005
457 * Fix make dependencies for at91rm9200 and ks8695 cpus
458 Patch by Steven Scholz, 23 Aug 2005
460 * Add JFFS2 support for TQM5200 board
462 * Add esd cpci5200 and pf5200 boards
463 Patch by Reinhard Arlt, 22 Aug 2005
465 * Fix sysclock for TQM8540 and TQM8560 boards
466 Patch by Martin Krause, 25 Jul 2005
468 * Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
469 Patch by Martin Krause, 08 Jun 2005
471 * Add new board specific commands for TQM5200/STK52XX
472 - Sound commands (beep, wav, sound)
473 - Test commands (led, can, backlight, rs232)
474 Patch by Martin Krause, 02 May 2005
476 * Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
477 because of a bug in the AT91RM9200 CPU PLL
478 Patch by Martin Krause, 22 Apr 2005
480 * Add automatic HW detection for another CMC_PU2 variant
481 Patch by Martin Krause, 20 Apr 2005
483 * Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
484 Patch by Martin Krause, 19 Apr 2005
486 * Fix initialization problem on TQM5200 without SM501
487 Patch by Martin Krause, 08 Apr 2005
489 * Add RTC support for STK52XX.200
490 Patch by Martin Krause, 07 Apr 2005
492 * Add support for IFM o2dnt board
494 * Enable PCI on hmi1001 board
496 * Fix return values of the jffs2 commands ls/fsload/fsinfo,
497 so we can use them to, e.g., check the existence of a file with
498 "if ls foo; then this; else that; fi" in the hush shell
499 Patch by Andreas Engel, 16 August 2005
501 * Coding style cleanup
503 * Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
504 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
506 * Check return value of malloc in 440gx_enet.c
507 Patch by Travis B. Sawyer, 18 Jul 2005
509 * Add Sandburst Metrobox and Sandburst Karef board support packages.
510 Second serial port on 440GX now defined as a system device.
511 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
512 Patch by Travis B. Sawyer, 12 Jul 2005
514 ======================================================================
515 Changes for U-Boot 1.1.3:
516 ======================================================================
520 * Add forgotten new fils from latest VoiceBlue update
522 * Make bootretry feature work with hush shell.
523 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
524 Patch by Andreas Engel, 19 Jul 2005
526 * Update Hymod Board Database PHP code in "tools" directory
527 Patch by Murray Jensen, 01 Jul 2005
529 * Make "tr" command use POSIX compliant; export HOSTOS make variable
530 Patch by Murray Jensen, 30 Jun 2005
532 * Fix Murray Jensen's mail address.
533 Patch by Murray Jensen, 30 Jun 2005
535 * Preserve PHY_BMCR during a soft reset.
536 Patch by Carl Riechers, 24 Jun 2005
538 * VoiceBlue update: eeprom tool can also store firmware version now.
539 eeprom.bin is runable by jumping at load address.
540 Patch by Ladislav Michl, 23 May 2005
542 * Move the AT91RM9200DK to the ARM Systems list.
543 Patch by Anders Larsen, 26 Apr 2005
545 * Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
546 Patch by Anders Larsen, 26 Apr 2005
548 * measure_gclk() is needed when DEBUG is enabled
549 Patch by Bryan O'Donoghue, 25 Apr 2005
551 * Add UPD-Checksum code, fix problem in net.c (return instead of break)
552 Patch by Reinhard Arlt, 12 Aug 2005
554 * esd PCI405 board updated
555 Patch by Matthias Fuchs, 28 Jul 2005
557 * esd WUH405 and DU405 board updated
558 Patch by Matthias Fuchs, 27 Jul 2005
560 * Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
561 Patch by Matthias Fuchs, 4 May 2005
563 * Update AMCC Yosemite to get a consistent setup for all AMCC eval
564 boards (baudrate, environment...). Flash driver fixed.
565 Patch by Stefan Roese, 11 Aug 2005
567 * Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
568 Patch by Stefan Roese, 11 Aug 2005
570 * Add NAND FLASH support for AMCC Bamboo 440EP eval board
571 Patch by Stefan Roese, 11 Aug 2005
573 * Add configuration for IFM AEV FIFO board.
574 Minor coding style cleanup.
576 * Add configuration for IFM SPI eval board
578 * Fix CompactFlash problem on HMI1001 board
580 * Make new "mtdparts" code build with older compilers
581 Patch by Andrea Scian, 09 Aug 2005
583 * Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
584 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
585 with the 405 defines and the linux kernel defines.
586 Patch by Stefan Roese, 08 Aug 2005
588 * Fix compiler warnings with older GCC versions
590 * Add common (with Linux) MTD partition scheme and "mtdparts" command
592 Old, obsolete and duplicated code was cleaned up and replace by the
593 new partitioning method. There are two possible approaches now:
595 The first one is to define a single, static partition:
597 #undef CONFIG_JFFS2_CMDLINE
598 #define CONFIG_JFFS2_DEV "nor0"
599 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
600 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
601 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
603 The second method uses the mtdparts command line option and dynamic
606 /* mtdparts command line support */
607 #define CONFIG_JFFS2_CMDLINE
608 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
609 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
611 Command line of course produces bigger images, and may be inappropriate
612 for some targets, so by default it's off.
614 * Fix build problems for PM856 Board
616 * Fix sign extension bug in 'fpga loadb' command;
617 make 'fpga loadb' always print the file header info
618 Patch by Andrew Dyer, 11 Jan 2005
620 * Fix errors that occur when accessing SystemACE CF
621 Patch by Jeff Angielski, 09 Jan 2005
623 * Document switching between U-Boot and PlanetCore on RPXlite
624 by Sam Song, 24 Dec 2004
626 * Fix PowerQUICC II mask detection.
627 Patch by Eugene Surovegin, 20 Dec 2004
629 * Add support for Altera NIOS DK1C20 board
630 Patch by Shlomo Kut, 13 Dec 2004
632 * Add support for ep8248 board
633 Patch by Yuli Barcohen, 12 Dec 2004
637 * Fix baudrate setting for KGDB on MPC8260
638 Patch by HoJin, 11 Dec 2004
640 * Fix 'mii help' text formatting
641 Patch by Cory Tusar, 10 Dec 2004
643 * Fix return code of NFS command
644 Patch by Hiroshi Ito, 11 Dec 2004
648 * Fix compiler warnings in cpu/ppc4xx/usbdev.c
649 Patch by Steven Blakeslee, 04 Aug 2005
651 * Add support for AMCC Bamboo PPC440EP eval board
652 Patch by Stefan Roese, 04 Aug 2005
654 * Patch by Jon Loeliger
655 Fix style issues primarily in 85xx and 83xx boards.
657 - Trailing white space
658 - Indentation not by TAB
659 - Excessive amount of empty lines
660 - Trailing empty lines
662 * Patch by Ron Alder, 11 Jul 2005
663 Add Xianghua Xiao and Lunsheng Wang's support for the
664 GDA MPC8540 EVAL board.
666 * Patch by Eran Liberty
667 Add support for the Freescale MPC8349ADS board.
669 * Patch by Jon Loeliger, 25 Jul 2005
670 Move the TSEC driver out of cpu/mpc85xx as it will be shared
671 by the upcoming mpc83xx family as well.
673 * Patch by Jon Loeliger, 05 May 2005
674 Implemented support for MPC8548CDS board.
675 Added DDR II support based on SPD values for MPC85xx boards.
676 This roll-up patch also includes bugfies for the previously
678 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
680 * Patch by Jon Loeliger, 10 Feb 2005
681 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
683 * Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
685 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
686 for faster flash parts.
687 Add documentation for BR/OR for FLASH.
689 * Patch by Jon Loeliger 08 Feb 2005
690 Determine L2 Cache size dynamically on 85XX boards.
692 * Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
693 - Convert the CPM2 based functionality to use new CONFIG_CPM2
694 option rather than a myriad of CONFIG_MPC8560-like variants.
695 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
696 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
697 new CONFIG_CPM2 option to each 8260 board.
699 * Add support for MicroSys PM856 board
700 Patch by Josef Wagner, 03 Aug 2005
702 * Minor fixes to PM854 board
703 Patch by Josef Wagner, 03 Aug 2005
705 * Adjust configuration of XENIAX board
706 (chip select and GPIO required for USB operation)
708 * Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
709 routed to the Watchdog handler
710 Patch by Eugene Surovegin, 18 Jun 2005
712 * (re)enabled scsi commands do_scsi() and do_scsiboot()
713 Patch by Denis Peter, 06 Dec 2004
715 * Fix endianess problem in TFTP / NFS default filenames
716 Patch by Hiroshi Ito, 06 Dec 2004
718 * Ignore broadcast status bit in received frames in 8260 FCC ethernet
720 Patch by Murray Jensen, 18 Jul 2005
722 * Fix typo in mkconfig script (used == instead of =)
723 Patch by Murray Jensen, 18 Jul 2005
725 * Cleanup build problems on 64 bit build hosts
727 * Update MAINTAINERS file
729 * Patch by Stefan Roese, 01 Aug 2005:
730 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
731 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
733 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
734 to run on both 405GP and 405GPr eval boards).
736 * Patch by Steven Blakeslee, 27 Jul 2005:
737 - Add support for AMCC PPC440EP/GR.
738 - Add support for AMCC Yosemite PPC440EP eval board.
739 - Add support for AMCC Yellowstone PPC440GR eval board.
741 * Minor fixes for PPChameleon Board:
742 - fix alignment of NAND size
743 - make code do what the comment says
745 * Implement h/w sector protection status synchronization at boot.
746 The code is provided for, and was tested on, the Yukon/Alaska
747 and PM520 boards only.
749 A bug in flash_real_protect() for the Yukon board was fixed by
750 adding a function that tells if two banks are on one flash chip.
752 * Fix sysmon POST problem: check I2C error codes
753 This fixes a problem of displaying bogus voltages when the voltages
754 are so low that the I2C devices start failing while the rest of the
755 system keeps running.
757 * Patch by Cedric Vincent, 6 Jul 2005:
758 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
760 * Patch by Jon Loeliger, 20 Jul 2005:
761 Add missing PCI IO port definitions.
763 * Add CompactFlash support for HMI1001 board.
765 * Adjust printed board ID for LWMON board.
767 * Fix low-level OHCI transfers for ARM920t and MPC5xxx
769 * Add new argument format for flash commands to allow for usage like
770 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
771 U-Boot will automaticially find the end of the corresponding sector.
773 * Patch by Stefan Roese, 5 Jul 2005:
774 Update uc100 board PHY setup
776 * Patch by Stefan Roese, 1 Jul 2005:
777 Fix PHY address for CATcenter board (now correct!)
779 * Patch by Stefan Roese, 30 Jun 2005:
780 Fix PHY addresses for PPChameleon and CATcenter boards
781 Change MAINTAINER for most esd boards
783 * Patch by Detlev Zundel, 30 Jun 2005:
784 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
786 * Fix baudrate calculation problem on MPC5200 systems
788 * Add EEPROM and RTC support for HMI1001 board
790 * Patch by Detlev Zundel, 20 Jun 2005:
791 Fix initialization of low active GPIO pins on inka4x0 board
793 * Enable redundant environment, disable HW flash protection of
796 * Patch by Travis Sawyer, 10 Jun 2005:
797 Initialize allocated dev and private hw structures
798 after their respective allocation in 440gx_enet.c
800 * Patch by Steven Scholz, 10 Jun 2005:
801 Fix byteorder problems with second argument of "bootm" with
804 * Add support for HMI1001 board
806 * Disable "date" and "sntp" commands on TQM866M
808 * Fix watchdog reset problems on LWMON board
810 * Patch by Juergen Selent, 17 May 2005:
811 Add support for Funkwerk VoVPN gateway module.
813 * Cleanup debug code for MPC8220 FEC driver
815 * Extend burst mode RAM test program to take a loop count
818 * Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
819 those boards that use it.
821 * Patches by Greg Ungerer, 19 May 2005:
822 - add support for the KS8695P (ARM 922 based) CPU
823 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
825 * Patch by Steven Scholz, 19 May 2005:
826 Add support for CONFIG_SERIAL_TAG on ARM boards
828 * Add PCI support for Sorcery board.
829 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
831 * Fix compile problems caused by new burst mode SDRAM test;
832 make port pins to trigger logic analyzer configurable
834 * Fix timer handling on MPC85xx systems
836 * Fix debug code in omap5912osk flash driver
838 * Add support for MPC8247 based "IDS8247" board.
840 * Add support for 2 x TSEC interfaces on the TQM8540 board.
842 * On LWMON we must use the watchdog to reset the board as the CPU
843 genereated HRESET pulse is too short to reset the external
846 * Add test tool to exercise SDRAM accesses in burst mode
847 (as standalone program, MPC8xx/PowerPC only)
849 * Increase CFG_MONITOR_LEN for Rattler board to match actual code
852 * Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
853 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
854 added to support LZO and LZARI compression modes (undefined by
857 * Fix problem with symbolic links in JFFS2 code.
859 * Use linker ASSERT statement to prevent undetected overlapping of
860 sections on PPChameleon board; other boards might use this, too.
862 * Patch by Stefan Roese, 03 May 2005:
864 Fix problems in cmd_universe.c
866 * Patch by Matthias Fuchs, 03 May 2005:
867 Added missing variable declaration in cmd_nand.c
868 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
870 * Fix INKA4x0: use CS1 as gpio_wkup_6 output
872 * Fix bug in the SDRAM initialization code for canmb, IceCube and
874 Fix PHY address for canmb board.
876 * Cleanup serial console baudrate calculation on AT91RM9200;
877 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
879 * Patch by Matthias Fuchs, 18 Apr 2005:
880 Make PCI target address spaces on PMC405 and CPCI405 boards
881 configurable via environment variables
883 * Auto-size RAM on canmb board.
885 * Add support for canmb board
887 * Patch by Stefan Roese, 13 Apr 2005:
888 Update for esd apc405
890 * Fixes for TQM8560 board:
892 - remove debug messages
893 - fix flash sector protection
895 * Patch by Steven Scholz, 07 Apr 2005:
896 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
898 * Patches by Steven Scholz, 07 Apr 2005:
899 Fix compiler warning in altera.c
900 Fix warning in cpu/arm920t/at91rm9200/i2c.c
902 * Patch by Ladislav Michl, 06 Apr 2005:
903 Fix voiceblue configuration.
905 * Patch by Stefan Roese, 06 Apr 2005:
906 Updates for OCOTEA board:
907 - Changed U-Boot size from 512kByte to 256kByte
908 - Fixed flash driver to support boot from soldered user flash
909 - Added README for switch from PIBS firmware to U-Boot
911 * Patch by Travis Sawyer, 05 Apr 2005:
912 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
913 Problem found by Andrew Wozniak.
915 * Patch by Steven Scholz, 06 Apr 2005:
916 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
917 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
919 * Patches by Robert Whaley, 29 Nov 2004:
920 - update the pxa-regs.h file for PXA27x chips
921 - add PXA27x based ADSVIX board
922 - add support for MMC on PXA27x processors
924 * Patch by Andrew E. Mileski, 28 Nov 2004:
925 Fix PPC4xx SPD SDRAM detection bug
927 * Patch by Hiroshi Ito, 26 Nov 2004:
928 Fix logic of "test -z" and "test -n" commands
930 * Patch by Ladislav Michl, 05 Apr 2005:
931 Add support for VoiceBlue board.
933 * Patch by Ladislav Michl, 05 Apr 2005:
934 Fix netboot_common() prototypes.
936 * Patch by Steven Scholz, 05 Apr 2005:
937 Use i.MX watchdog timer for reset_cpu()
939 * Patch by Steven Scholz, 05 Apr 2005:
940 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
941 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
944 * Add support for MPC8220 based "sorcery" board.
946 * Add support for TQM8560 board.
948 * Add FEC support for TQM8540 board.
949 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
951 * Patch by Martin Krause, 04 Apr 2005:
952 Update default configuration for CMC_PU2 board.
954 * Patch by Steven Scholz, 04 Apr 2005:
955 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
956 - introduce two new configuration options instead:
957 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
959 * Patch by Steven Scholz, 04 Apr 2005:
960 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
962 * Fix timer code for ARM systems: make sure that udelay() does not
963 reset timers so it's save to use udelay() in timeout code.
965 * Patch by Mathias Küster, 23 Nov 2004:
966 add udelay support for the mcf5282 cpu
968 * Patch by Tolunay Orkun, 16 November 2004:
969 fix incorrect onboard Xilinx CPLD base address
971 * Patch by Jerry Van Baren, 08 Nov 2004:
972 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
973 the jumper for the HRCW source should select flash. If lowboot is
974 not selected, the jumper for the HRCW source should select the
976 - change default load base address to 0x00400000
978 * Patch by Yuli Barcohen, 08 Nov 2004:
979 Add support for Analogue & Micro Rattler boards.
980 Tested on Rattler8248.
982 * Patch by Andre Renaud, 08 Nov 2004:
983 Fix watchdog support in common/lcd.c
985 * Patch by Marc Leeman, 05 Nov 2003:
986 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
987 bug only affects the XPC8245 processors
989 * Patches by Josef Wagner, 29 Oct 2004:
990 - Add support for MicroSys CPU87 board
991 - Add support for MicroSys PM854 board
993 * Patch by Jian Zhang, 02 Nov 2004:
994 Add 16-bit NAND support
996 * Patch by Scott McNutt, 01 Nov 2004:
997 Add missing NIOS/NIOS2 support for "iminfo" command
999 * Patch by Detlev Zundel, 29 Oct 2004:
1000 Add missing NIOS/NIOS2 support for "mkimage" tool.
1002 * Patch by David Adair, 27 Oct 2004:
1003 Add missing 440GX SDRAM Controller reset
1005 * Patch by Steven Scholz, 25 Oct 2004:
1006 Declare reset_cpu() in include/common.h instead locally
1008 * Patch by Yusdi Santoso, 22 Oct 2004:
1009 - Add support for HIDDEN_DRAGON board
1010 - fix endianess problem in driver/rtl1839.c
1012 * Patch by Allen Curtis, 21 Oct 2004:
1013 support multiple serial ports
1015 * Patch by Richard Klingler, 03 Apr 2005:
1016 Add call to eth_halt() in net/net.c when called functions fail
1017 after eth_init() has been called.
1019 * Patch by Sam Song, 3 April 2005:
1020 - Update README.Netconsole
1023 * Prepare for SoC rework of ARM code:
1024 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
1025 - rename memsetup into lowlevel_init (function name and source files)
1026 Patch by Steven Scholz, 03 Apr 2005:
1027 - create SoC specific directories include/asm-arm/arch-imx and
1028 include/asm-arm/arch-s3c24x0
1030 * Fix problems with SNTP support;
1031 enable SNTP support in some boards.
1033 * Patches by Martin Krause, 01 Apr 2005:
1034 - Fix flash erase timeout on CMC_PU2
1035 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
1037 * Patch by Steven Scholz, 13 March 2005:
1038 fix cache enabling for AT91RM9200
1040 * Patch by Masami Komiya, 30 Mar 2005:
1041 add SNTP support and expand time server and time offset fields of
1042 DHCP support. See doc/README.SNTP
1044 * Patch by Steven Scholz, 13 Dec 2004:
1045 Fix bug in at91rm920 ethernet driver
1047 * Patch by Steven Scholz, 13 Dec 2004:
1048 Remove duplicated code by merging memsetup.S files for
1049 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
1051 * Patch by Detlev Zundel, 31 Mar 2005:
1052 Cleanup duplicate definition of overwrite_console()
1054 * Update TQM5200 configuration;
1055 prepare for Rev. 200 starter kit boards
1057 * Patch by Scott McNutt, 21 Oct 2004:
1058 Add support for Nios-II EPCS Controller core.
1060 * Patch by Scott McNutt, 20 Oct 2004:
1062 - Add sysid command (Nios-II only).
1063 - Locate default exception trampoline at proper offset.
1064 - Implement I/O routines (readb, writeb, etc)
1065 - Implement do_bootm_linux
1067 * Patches by Martin Krause, 22 Mar 2005:
1068 - use TQM5200_auto as MAKEALL target for TQM5200 systems
1069 - add support for SM501 graphics controller
1070 - add support for graphic console on TQM5200
1071 - add support for TQM5200 Rev 200
1072 - cleanup, fix typo in include/configs/TQM5200.h
1074 * Patch by Manfred Baral, 17 Mar 2005:
1077 * Fix RTC configuration for PPChameleon board
1079 * Cleanup, fix typo in include/configs/TQM5200.h
1081 * Patch by Stefan Roese, 16 Mar 2005:
1082 Update for esd auto_update and hh405 board
1084 * Adapt for U-Boot image size (new features enabled) on TQM5200
1086 * Update code for TQM8540 board (and 85xx in general):
1087 - Change the name of the Ethernet driver: MOTO ENET -> ENET
1088 - Reformat boot messages
1089 - Enable redundant environment
1090 - Replace the -O2 optimization flag with -mno-string
1092 * Patch by David Brownell, 10 Mar 2005:
1093 Restore copyright statements in OHCI drivers.
1095 * Add support for TQM8540 board
1097 * Patch by Detlev Zundel, 14 Mar 2005:
1098 NC650: changed NAND flash addressing to using UPMB
1100 * Patch by Stefan Roese, 14 Mar 2005:
1101 Update for esd voh405 fpga image
1103 * INKA4x0: Allow initialization of LCD backlight dimming from
1104 "brightness" environment variable.
1106 * Add port initialization for digital I/O on INKA4x0
1108 * Patch by Stefan Roese, 01 Mar 2005:
1109 Update for esd boards dp405 and hub405
1111 * Fix get_partition_info() parameter error in all other calls
1112 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
1114 * Enable USB and IDE support for INKA4x0 board
1116 * Patch by Andrew Dyer, 28 Feb 2005:
1117 fix ext2load passing an incorrect pointer to get_partition_info()
1118 resulting in load failure for devices other than 0
1120 * Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
1122 * Cleanup USB and partition defines
1124 * Add support for ext2 filesystems and image timestamps to TQM5200 board
1126 * Add reset code for Coral-P on INKA4x0 board
1128 * Patch by Martin Krause, 28 Jun 2004:
1129 Update for TRAB board.
1131 * Fix some missing "volatile"s in MPC5xxx FEC driver
1133 * Fix cirrus voltage detection (for CPC45)
1135 * Fix byteorder problem in usbboot and scsiboot commands.
1137 * Patch by Cajus Hahn, 04 Feb 2005:
1138 - don't insist on leading '/' for filename in ext2load
1139 - set default partition to useful value (1) in ext2load
1141 * Patch by Andrew Dyer, 08 Jan 2005:
1142 fix wrong return codes in ext2 code
1144 * Removed '--no-warn-mismatch' option from Makefile. This option
1145 makes 'ld' to overlook binary objects compatibility.
1147 * Moved $(PLATFORM_LIBS) from the library group (--start-group ...
1148 --end-group) outside of the group. This will make 'ld' to do
1149 _multiple_ search in the library group when resolving symbol
1150 references and do only a _single_ seach in libgcc.a after the group
1153 * Fix stability problems on CPC45 board again.
1155 * Make image detection for diskboot / usbboot / scsiboot more robust
1156 (also check header checksum)
1158 * Update CPC45 board configuration.
1160 * Add USB and PCI support for INKA4x0 board
1162 * Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
1166 * Patch by Robin Getz, 13 Oct 2004:
1167 Add standalone application to change SMC91C111 MAC addresses,
1168 see examples/README.smc91111_eeprom
1170 * Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
1171 Fix Flash support for ARM Integrator CP.
1173 * Patch by Richard Woodruff, 10 Jan 2005:
1174 Update support for OMAP2420 (ARM11) and H4 board:
1175 o clean up and add new types to H4 memory probe code.
1176 o fix to work with internal boot.
1177 o added PRCM config III operation.
1178 o fix marginal flash timings.
1179 o add revison ATAG usage.
1180 o enable voltage scaling at power chip.
1181 o fix compile error for i2c.
1183 * Fix network problem (error when receiving multiple ARP packets)
1185 * Patch by Daniel Poirot, 12 Oct 2004:
1186 Add support for Wind River sbc405 board
1188 * Patch by Rainer Brestan, 12 Oct 2004:
1189 Make examples/Makefile more robust
1191 * Patch by Sam Song, 11 October 2004:
1192 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
1193 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
1196 * Patch by Sam Song, 10 Oct 2004:
1197 Fix a parameter error in run_command() in main.c
1199 * Patch by Richard Woodruff, 01 Oct 2004:
1200 add support for the TI OMAP2420 processor and its H4 reference
1203 * Patch by Christian Pellegrin, 24 Sep 2004:
1204 Added support for NE2000 compatible (DP8390, DP83902) NICs.
1206 * Patch by Leif Lindholm, 23 Sep 2004:
1207 add support for the AMD db1550 board
1209 * Patch by Travis Sawyer, 15 Sep 2004:
1210 Add CONFIG_SERIAL_MULTI support for ppc4xx,
1211 update README.serial_multi
1213 * Patches by David Snowdon, 07 Sep 2004:
1214 - add u-boot.hex target in the top level Makefile
1215 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
1216 - use -mtune=xscale and -march=armv5 options for PXA
1218 * Patch by Florian Schlote, 08 Sep 2004:
1219 Add support for SenTec-COBRA5272-board (Coldfire).
1221 * Patch by Gleb Natapov, 07 Sep 2004:
1222 mpc824x: set PCI latency timer to a sane value
1225 * Patch by Kurt Stremerch, 03 Sep 2004:
1226 Add bitstream configuration option for fpga command (Xilinx only).
1228 * Patch by Kurt Stremerch, 03 Sep 2004:
1229 Add Xilinx Spartan2E family FPGA support
1231 * Patch by Jeff Angielski, 02 Sep 2004:
1232 Add Added support for H2 revision of the EP8260 board.
1233 Fixed formatting for some of the EP8260 related source files.
1235 * Patch by Jon Loeliger, 02 Sep 2004:
1236 Reset monitor size back to 256 so environment can be written
1237 to flash on MPC85xx ADS and CDS releases.
1239 * Patch by Paolo Broggini, 02 Sep 2004:
1240 Make BSS clearing on ARM systems more robust
1242 * Patch by Yue Hu and Joe, 01 Sep 2004:
1243 - add PCI support for ixp425;
1244 - add EEPRO100 suppor tfor ixdp425 board.
1246 * Fix problem with protected sector detection in driver/cfi_flash.c
1248 ======================================================================
1249 Changes for U-Boot 1.1.2:
1250 ======================================================================
1252 * Code cleanup, mostly for GCC-3.3.x
1254 * Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
1255 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
1256 additional ethernet addresses.
1258 * Cleanup drivers/i82365.c - avoid duplication of code
1260 * Fix bogus "cannot span across banks" flash error message
1264 * Add support for CompactFlash for the CPC45 Board.
1266 * Fix problems with CMC_PU2 flash driver.
1269 - avoid trigraph warning in fs/ext2/ext2fs.c
1270 - rename UC100 -> uc100
1272 * Add support for UC100 board
1274 * Patch by Stefan Roese, 16 Dez 2004:
1275 - ext2fs support added
1276 - Tundra universe support added
1277 - Coldfire MCF5249 support added (no preloader needed!)
1278 - MCF5249 board TASREG added
1279 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
1281 - some esd boards updated
1282 - memory commands "mdc" and "mwc" added for cyclic read/write
1283 (CONFIG_MX_CYCLIC, see README for further description)
1285 * Add support for INKA4X0 board
1287 * Patch by Steven Scholz, 12 Dec 2004:
1288 Fix typo in AT91 memory setup.
1290 * Patch by Martin Krause, 27 Oct 2004:
1291 - add support for "STK52xx" board (including PS/2 multiplexer)
1292 - add hardware detection for TQM5200
1294 * Clean up CMC PU2 flash driver
1296 * Update MAINTAINERS file
1298 * Fix bug in MPC823 LCD driver
1300 * Fix udelay() on AT91RM9200 for delays < 1 ms.
1302 * Enable long help on CMC PU2 board;
1304 increase CPU speed from 179 to 207 MHz.
1306 * Fix smc91111 ethernet driver for Xaeniax board (need to handle
1307 unaligned tail part specially).
1309 * Update for AT91RM9200DK and CMC_PU2 boards:
1310 - Enable booting directly from flash
1311 - fix CMC_PU2 flash driver
1313 * Fix mkimage usage message
1315 * Map SRAM on NC650 board
1317 * Work around for Ethernet problems on Xaeniax board
1319 * Patch by TsiChung Liew, 23 Sep 2004:
1320 - add support for MPC8220 CPU
1321 - Add support for Alaska and Yukon boards
1323 * Fix configuration for ERIC board (needs more room)
1325 * Adjust MIPS compiler options at run-time depending on tools version
1326 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
1327 "-mcpu=4kc" for old tools)
1329 * Add passing of the command line and memory size information to the
1330 kernel on xaeniax board.
1332 * Enable NAND flash support for NC650 board.
1334 * Patch by Thomas Lange 07 Oct 2004:
1335 Updated README for DBAu1x00 boards to match current status
1337 * Patch by Philippe Robin, 28 Sept 2004:
1338 Fix Flash support for Versatile.
1340 * Patch by Roger Blofeld, 16 Sep 2004:
1341 Fix timeout for DHCP command retry
1343 * Patch by Pantelis Antoniou, 14 Sep 2004:
1344 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
1346 * Patch by Pantelis Antoniou, 14 Sep 2004:
1347 Kick watchdog when bz-decompressing
1349 * Fix CFG_HZ problems on AT91RM9200 systems
1350 [Remember: CFG_HZ should be 1000 on ALL systems!]
1352 * Patch by Gridish Shlomi, 30 Aug 2004:
1353 - Add support to revA version of PQ27 and PQ27E.
1354 - Reverted MPC8260ADS baudrate back to original 115200
1356 * Patch by Hojin, 17 Sep 2004:
1357 Fix typo in cfi_flash.c
1359 * Patch by Mark Jonas, 09 September 2004:
1360 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
1363 * Patch by Mark Jonas, 31 August 2004:
1364 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
1365 improves FTP performance for MPC5200 systems. Enabled for IceCube
1368 * Patch by Michael Bendzick, 30 Aug 2004:
1369 - Improve platform.S code for omap1510inn that detects whether code
1370 is running from SDRAM or not. Patch allows SDRAM to be configured
1371 if code is running out of SRAM at 0x20000000.
1373 * Patch by Frederick Klatt, 30 Aug 2004:
1374 Add support for the Wind River SBC8540/SBC8560 boards
1376 * Configure SX1 board to use drivers/cfi_flash.c
1378 * Patches by Michael Bendzick, 30 Aug 2004:
1379 - Configure omap1510inn board to use drivers/cfi_flash.c
1380 - Make drivers/cfi_flash.c protect environment and redundant
1383 * Patch by Steven Scholz, 23 Jun 2004:
1384 - Add script (tools/img2brec.sh) to programm U-Boot into
1385 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
1387 * Patches by Scott McNutt, 24 Aug 2004:
1388 - Add support for Altera Nios-II processors.
1389 - Add support for Psyent PCI-5441 board.
1390 - Add support for Psyent PK1C20 board.
1392 * Patches by Jon Loeliger, 24 Aug 2004:
1393 - Add support for the MPC8541 and MPC8555 CDS boards
1394 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
1395 - Convert MPC85xxADS to use common CFI flash driver
1396 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
1397 from board_early_init_f()
1398 - Provide SW workaround for PCI initialization on 85xx CDS
1400 * Patches by George G. Davis, 24 Aug 2004:
1401 - Enable ramdisk/initrd tagged param support for omap1610h2_config
1402 - Remove static network setup defaults from mx1ads_config
1403 - update ARM boards to use constants from mach-types.h
1405 * Patch by Gary Jennejohn, 04 Oct 2004:
1406 - fix I2C on at91rm9200
1407 - add support for Ricoh RS5C372A RTC
1409 * Patch by Gary Jennejohn, 01 Oct 2004:
1410 - add support for CMC PU2 board
1411 - add support for I2C on at91rm9200
1413 * Patch by Gary Jennejohn, 28 Sep 2004:
1414 fix baudrate handling on at91rm9200
1416 * Patch by Yuli Barcohen, 22 Aug 2004:
1417 - remove ZPC.1900 board-specific flash driver;
1418 switch the port to generic CFI driver;
1421 * Patch by Hinko Kocevar, 21 Aug 2004:
1422 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
1424 * Clean up tools/bmp_logo.c to not add trailing white space
1426 * Patch by Hinko Kocevar, 21 Aug 2004:
1427 - Group common framebuffer functions in common/lcd.c
1428 - Group common framebuffer macros and #defines in include/lcd.h
1429 - Provide calc_fbsize() for video ATAG
1431 * Patch by Sam Song, 21 August 2004:
1432 - Fix a typo in README
1433 - Align "(RO)" output for "flinfo" after "protect on"
1434 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
1435 ratio 1:1 when core frequency less than 50MHz
1437 * Patches by Hinko Kocevar, 21 Aug 2004:
1438 - fix some "use of label at end of compound statement" warnings
1439 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
1441 * Patch by Steven Scholz, 16 Aug 2004:
1442 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
1443 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
1444 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
1445 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
1446 into cpu/arm920t/$(SOC)/
1448 * Patches by Sean Chang, 09 Aug 2004:
1449 - Added support for both 8 and 16 bit mode access to System ACE CF
1451 - Fixed missing System ACE CF device during get FAT partition info
1452 in fat_register_device function.
1453 - Enabled System ACE CF support on ML300.
1455 * Patch by Sean Chang, 09 Aug 2004:
1456 Synch defines for saveenv and do_saveenv functions so they get
1457 compiled under the same statement.
1459 * Patch by Sean Chang, 09 Aug 2004:
1460 - Added I2C support for ML300.
1461 - Added support for ML300 to read out its environment information
1462 stored on the EEPROM.
1463 - Added support to use board specific parameters as part of
1464 U-Boot's environment information.
1465 - Updated MLD files to support configuration for new features
1468 * Patches by Travis Sawyer, 05 Aug 2004:
1469 - Remove incorrect bridge settings for eth group 6
1470 - Add call to setup bridge in ppc_440x_eth_initialize
1471 - Fix ppc_440x_eth_init to reset the phy only if its the
1472 first time through, otherwise, just check the phy for the
1473 autonegotiated speed/duplex. This allows the use of netconsole
1474 - only print the speed/duplex the first time the phy is reset.
1476 * Patch by Shlomo Kut, 29 Mar 2004:
1477 Add support for MKS Instruments "Quantum" board
1479 * Fix build problem with Cogent boards;
1480 avoid using <asm/byteorder.h> when using the host compiler
1482 * Patch by Ganapathi C, 04 Aug 2004:
1483 Fix NFS timeout issue
1485 * Patch by Yuli Barcohen, 19 Jul 2004:
1486 - Fix host tools building in Cygwin environment
1487 - Fix header files search order for host tools
1489 * Patch by Tom Armistead, 19 Jul 2004:
1490 Fix kgdb.S support for 74xx_75x cpu
1492 * Patch by Jon Loeliger, 15 Jul 2004:
1493 Fix MPC85xx I2C driver
1495 * Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
1497 * Patch by Stephen Williams, 15 July 2004
1498 Set the PCI class code for JSE board as part of PCI interface setup
1500 * Patch by Michael Bendzick, 15 Jul 2004:
1501 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
1502 CFG_FLASH_USE_BUFFER_WRITE is set
1504 * Patch by Yuli Barcohen, 13 Jul 2004:
1505 Allow clock setting on MPC866/MPC885 series chips according to
1506 environment variable `cpuclk'
1508 * Patch by Yuli Barcohen, 20 Apr 2004:
1509 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
1511 * Patch by Vincent Dubey, 24 Sep 2004:
1512 Add support for xaeniax board
1514 * Add comment about non-GPL character of standalone applications to
1517 * Fix FEC ethernet problem on NSCU board.
1519 * Patch by Gary Jennejohn, 09 Sep 2004:
1520 allow to use USART1 as console port on at91rm9200dk boards
1522 * Patch by Stefan Roese, 16 Sep 2004:
1525 * Fix SysClk handling for PPChameleon and CATcenter boards
1527 * Patch by Detlev Zundel, 08 Sep 2004:
1528 Update etags build target
1530 * Improve NetConsole support: add support for broadcast destination
1531 address and buffered input.
1533 * Cleanup compiler warnings for GCC 3.3.x and later
1535 * Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
1537 * Add support for IDS "NC650" board
1539 * Add automatic update support for LWMON board
1541 * Clear Block Lock-Bits when erasing flash on LWMON board.
1543 * Fix return code of "fatload" command
1545 * Enable MSDOS/VFAT filesystem support for LWMON board
1547 * Patch by Martin Krause, 03 Aug 2004:
1548 change timing for SM501 graphics controller on TQM5200 module
1550 * Patch by Mark Jonas, 13 July 2004:
1551 - Total5200 LCD now run in little endian mode. Endianess conversion
1552 is done in hardware.
1553 - Removed last reference to "console" environment variable.
1555 * Patches by Lars Munch, 12 Jul 2004:
1556 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
1558 - split out the LXT971A PHY from ns_9750_eth.h
1559 - split the dm9161 phy part out of at91rm9200_ether.c
1561 * Patch by Andreas Engel, 12 Jul 2004:
1562 Replaced hardcoded PL011 clock frequency with config variable.
1563 Fixed wrong CONFIG_CMD_DFL doc.
1565 * Patch by Thomas Viehweger, 09 Jun 2004:
1566 make it possible to remove chpart when there is only one partition
1568 * Add support for console over UDP (compatible to Ingo Molnar's
1569 netconsole patch under Linux)
1571 * Patch by Jon Loeliger, 16 Jul 2004:
1572 - support larger DDR memories up to 2G on the PC8540/8560ADS and
1574 - Made MPC8540/8560ADS be 33Mhz PCI by default.
1575 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
1576 and CONFIG_L2_INIT_RAM options.
1577 - Refactor Local Bus initialization out of SDRAM setup.
1578 - Re-implement new version of LBC11/DDR11 errata workarounds.
1579 - Moved board specific PCI init parts out of CPU directory.
1580 - Added TLB entry for PCI-1 IO Memory
1581 - Updated README.mpc85xxads
1583 * Patch by Sascha Hauer, 28 Jun:
1584 - add generic support for Motorola i.MX architecture
1585 - add support for mx1ads, mx1fs2 and scb9328 boards
1587 * Patches by Marc Leeman, 23 Jul 2004:
1588 - Add define for the PCI/Memory Buffer Configuration Register
1589 - corrected comments in cpu/mpc824x/cpu_init.c
1591 * Add support for multiple serial interfaces
1592 (for example to allow modem dial-in / dial-out)
1594 * Patch by Stefan Roese, 15 Jul 2004:
1595 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
1597 * Fix NSCU config; add ethernet wakeup code.
1599 * Add link for preloader for Motorola Coldfire to README.m68k
1601 * Patch by Michael Bendzick, 12 Jul 2004:
1602 fix output formatting in drivers/cfi_flash.c
1604 * Patch by Mark Jonas, 02 Jul 2004:
1605 Fix lowboot (again) on MPC5xxx
1607 * Patch by Curt Brune, 07 Jul 2004:
1608 relocate exception vectors on arm720t if needed
1610 * Patch by George G. Davis, 06 Jul 2004:
1611 - update mach-types.h to latest arm.linux.org.uk master list
1612 - Set correct OMAP1610 bi_arch_number for build target
1614 * Patch by Curt Brune, 06 Jul 2004:
1615 evb4510: add support for timer interrupt; cleanup
1617 * Patch by Dan Poirot, 06 Jul 2004:
1618 Fix sbc8260 environment variables
1620 * Cleanup redundand "console" environment variable
1622 * Patch by Mark Jonas, 05 Jul 2004:
1623 add support for the Total5100's and Total5200's LCD screen
1625 * Patches by Dan Eisenhut, 01 Jul 2004:
1627 - Move doc2000.h include to prevent compiler warning on some boards
1629 * Patch by Mark Jonas, 01 Jul 2004:
1630 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
1631 MGT5100 and MPC5200 based Freescale platforms.
1633 * Patch by Philippe Robin, 01 Jul 2004:
1634 Add initialization for Integrator and versatile board files.
1636 * Patch by Hinko Kocevar, 01 Jun 2004:
1637 Fix VFD FB allocation, add LCD FB allocation on ARM
1639 * Patch by Martin Krause, 30 Jun 2004:
1640 Add support for TQM5200 board
1642 * Patch by Martin Krause, 29 Jun 2004:
1643 Add loopw command: infinite write loop on address range
1645 * Patches by Yasushi Shoji, 29 Jun 2004:
1646 - add empty include/asm-microblaze/processor.h
1647 - add to CREDITS and MAINTAINERS
1648 - add gd initialization
1649 - add MicroBlaze and SUZAKU board to MAKEALL script
1650 - add reset support for SUZAKU
1651 - add flush_cache() for MicroBlaze
1652 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
1653 size flash memory on SUZAKU
1655 * Patch by Prakash Kumar, 27 Jun 2004:
1656 Add support for the PXA250 based Intrinsyc Cerf board.
1658 * Patch by Yasushi Shoji, 27 Jun 2004:
1659 fix comment in include/common.h
1661 * Rename SBC8560 into sbc8560 for consistency
1663 * Patch by Daniel Poirot, 24 Jun 2004:
1664 Add support for Wind River's sbc8240 board
1666 * Patches by Yasushi Shoji, 26 Jun 2004:
1667 - drivers/serial_xuartlite.c: fix "return 0" in void function
1668 - add microblaze support to mkimage tool
1670 * Patch by Fred Klatt, 25 Jun 2004:
1671 Add support for WindRiver's sbc8560 board
1673 * Patch by Nicolas Lacressonniere, 24 Jun 2004
1674 Small Bugs fixes for "at91rm9200dk" board:
1675 - Timing modifications for SPI DataFlash access
1676 - Fix NAND flash detection bug
1678 * Patch by Nicolas Lacressonniere, 24 Jun 2004:
1679 Add Support for Flash AT49BV6416 for AT91RM9200DK board
1681 * Patch by Jon Loeliger, 17 June 2004:
1682 Completion of the 8540ADS/8560ADS updates:
1683 Fix some PCI and Rapid I/O memory maps,
1684 Initialize both TSEC 1 and 2,
1686 Update MAINTAINER for 85xx boards and README.mpc85xxads
1688 * Patch by Yuli Barcohen, 16 Jun 2004:
1689 Remove obsolete AdderII port which was superseded by unified
1690 AdderII/Adder87x port
1692 * Patch by Ladislav Michl, 16 Jun 2004:
1693 Fix gcc-3.3.3 warnings for smc91111.c
1695 * Patch by Stefan Roese, 02 Jul 2004:
1696 - Fix bug in 405 ethernet driver; allocated data not cleared!
1697 - Fix problem in 405 i2c driver; don't try to print without console!
1699 * Patch by Paul Ruhland, 11 Jun 2004:
1700 Remove debug code from 'board/lpd7a40x/flash.c'
1702 * Patch by Andrea Marson, 11 Jun 2004:
1703 Update for PPChameleon board:
1704 - support for SysClk @ 25MHz
1705 - support for Silicon Motion SM712 VGA controller
1708 * Patches by Richard Woodruff, 10 Jun 2004:
1709 - fix problems with examples/stubs.c for GCC >= 3.4
1710 - fix problems with gd initialization
1712 * Patch by Curt Brune, 17 May 2004:
1713 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
1714 - Add support for ESPD-Inc. EVB4510 Board
1716 * Patch by Marc Leeman, 11 May 2004:
1717 Fix for MPC8245 - reading PPC Memory from another device with the
1718 PPC as PCI target device corrupts data due to interenal hardware
1721 * Fix "cls" command when used with splash screen
1723 * Increase NFS download timeout (now 1 min - 10 sec is to short for a
1724 slow download of a big image)
1726 * Add "cls" function to MPC823 LCD driver so we can reinitialize the
1727 display even after showing a bitmap
1729 * Patch by Josef Wagner, 04 Jun 2004:
1730 - DDR Ram support for PM520 (MPC5200)
1731 - support for different flash types (PM520)
1732 - USB / IDE / CF-Card / DiskOnChip support for PM520
1733 - 8 bit boot rom support for PM520/CE520
1734 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
1735 - I2C and RTC support for CPC45
1736 - support of new flash type (28F160C3T) for CPC45
1738 * Fix flash parameters passed to Linux for PPChameleon board
1740 * Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
1742 * Patch by Paul Ruhland, 10 Jun 2004:
1743 fix support for Logic SDK-LH7A404 board and clean up the
1744 LH7A404 register macros.
1746 * Patch by Matthew McClintock, 10 Jun 2004:
1747 Modify code to select correct serial clock on Sandpoint8245
1749 * Patch by Robert Schwebel, 10 Jun 2004:
1750 Add support for Intel K3 strata flash.
1752 * Patch by Thomas Brand, 10 Jun 2004:
1753 Fix "loads" command on DK1S10 board
1755 * Patch by Yuli Barcohen, 09 Jun 2004:
1756 Add support for 8MB flash SIMM and JFFS2 file system on
1757 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
1759 * Patch by Yuli Barcohen, 09 Jun 2004:
1760 Add support for Analogue&Micro Adder87x and the older AdderII board.
1762 * Patch by Ming-Len Wu, 09 Jun 2004:
1763 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
1765 * Patch by Sam Song, 09 Jun 2004:
1766 - Add support for RPXlite_DW board
1767 - Update FLASH driver for 4*AM29DL323DB90VI
1768 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
1770 * Patch by Mark Jonas, 08 June 2004:
1771 - Make MPC5200 boards evaluate the SVR to print processor name and
1772 version in checkcpu() (cpu/mpc5xxx/cpu.c).
1774 * Patch by Kai-Uwe Bloem, 06 May 2004:
1775 Fix endianess problem in cramfs code
1777 * Patch by Tom Armistead, 04 Jun 2004:
1778 Add support for MAX6900 RTC
1780 * Patches by Ladislav Michl, 03 Jun 2004:
1781 - fix cfi_flash.c on LE systems
1782 - let 'make mrproper' delete u-boot.img as well
1783 - turn printf into debug in cfi_flash.c
1785 * Patch by Kurt Stremerch, 28 May 2004:
1786 Add support for Exys XSEngine board
1788 * Patch by Martin Krause, 27 May 2004:
1789 Fix a MPC5xxx I2C timing issue in i2c_probe().
1791 * Patch by Leif Lindholm, 27 May 2004:
1792 Fix board_init_f() for dbau1x00 board.
1794 * Patch by Imre Deak, 26 May 2004:
1795 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
1796 Set flash base accordingly, and decide whether to do or skip board
1797 specific setup steps.
1799 * Patch by Josef Baumgartner, 26 May 2004:
1800 Add missing define in include/asm-m68k/global_data.h
1802 * Patch by Josef Baumgartner, 25 May 2004:
1803 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
1805 * Patch by Paul Ruhland, 24 May 2004:
1806 fix SDRAM initialization for LPD7A400 board.
1808 * Patch by Jian Zhang, 20 May 2004:
1809 add support for environment in NAND flash
1811 * Patch by Yuli Barcohen, 20 May 2004:
1812 Add support for Interphase iSPAN boards.
1814 * Patches by Paul Ruhland, 17 May 2004:
1815 - Add I/O functions to the smc91111 ethernet driver to support the
1816 Logic LPD7A40x boards.
1817 - Add support for the Logic Zoom LH7A40x based SDK board(s),
1818 specifically the LPD7A400.
1820 * Patches by Robert Schwebel, 15 May 2004:
1821 - call MAC address reading code also for SMSC91C111;
1822 - make SMSC91C111 timeout configurable, remove duplicate code
1823 - fix get_timer() for PXA
1824 - update doc/README.JFFS2
1825 - use "bootfile" env variable also for jffs2
1827 * Patch by Tolunay Orkun, 14 May 2004:
1828 Add support for Cogent CSB472 board (8MB Flash Rev)
1830 * Patch by Thomas Viehweger, 14 May 2004:
1831 - flash.h: more flash types added
1832 - immap_8260.h: some bits added (useful for RMII)
1833 - cmd_coninfo.c: typo corrected, printf -> puts
1834 - reduced size by replacing spaces with tab
1836 * Patch by Robert Schwebel, 13 May 2004:
1837 Add 'imgextract' command: extract one part of a multi file image.
1839 * Patches by Jon Loeliger, 11 May 2004:
1840 Dynamically handle REV1 and REV2 MPC85xx parts.
1841 (Jon Loeliger, 10-May-2004).
1842 New consistent memory map and Local Access Window across MPC85xx line.
1843 New CCSRBAR at 0xE000_0000 now.
1844 Add RAPID I/O memory map.
1845 New memory map in README.MPC85xxads
1846 (Kumar Gala, 10-May-2004)
1847 Better board and CPU identification on MPC85xx boards at boot.
1848 (Jon Loeliger, 10-May-2004)
1849 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
1850 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
1851 (Jim Robertson, 10-May-2004)
1852 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
1853 Supports multiple PHYs.
1854 (Andy Fleming, 10-May-2004)
1855 Some README.MPC85xxads updates.
1856 (Kumar Gala, 10-May-2004)
1857 Copyright updates for "Freescale"
1858 (Andy Fleming, 10-May-2004)
1860 * Patch by Stephen Williams, 11 May 2004:
1861 Add flash support for ST M29W040B
1862 Reduce JSE specific flash.c to remove dead code.
1864 * Patch by Markus Pietrek, 04 May 2004:
1865 Fix clear_bss code for ARM systems (all except s3c44b0 which
1866 doesn't clear BSS at all?)
1868 * Fix "ping" problem on INC-IP board. Strange problem:
1869 Sometimes the store word instruction hangs while writing to one of
1870 the Switch registers, but only if the next instruction is 16-byte
1871 aligned. Moving the instruction into a separate function somehow
1872 makes the problem go away.
1874 * Patch by Rishi Bhattacharya, 08 May 2004:
1875 Add support for TI OMAP5912 OSK Board
1877 * Patch by Sam Song May, 07 May 2004:
1878 Fix typo of UPM table for rmu board
1880 * Patch by Pantelis Antoniou, 05 May 2004:
1881 - Intracom board update.
1884 * Add support for the second Ethernet interface for the 'PPChameleon'
1887 * Patch by Dave Peverley, 30 Apr 2004:
1888 Add support for OMAP730 Perseus2 Development board
1890 * Patch by Alan J. Luse, 29 Apr 2004:
1891 Fix flash chip-select (OR0) option register setting on FADS boards.
1893 * Patch by Alan J. Luse, 29 Apr 2004:
1894 Report MII network speed and duplex setting properly when
1895 auto-negotiate is not enabled.
1897 * Patch by Jarrett Redd, 29 Apr 2004:
1898 Fix hang on reset on Ocotea board due to flash in wrong mode.
1900 * Patch by Dave Peverley, 29 Apr 2004:
1901 add MAC address detection to smc91111 driver
1903 * Patch by David Müller, 28 Apr 2004:
1904 fix typo in lib_arm/board.c
1906 * Patch by Tolunay Orkun, 20 Apr 2004:
1907 - README update: add CONFIG_CSB272 and csb272_config
1908 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
1909 i2cfast environment variable
1911 * Patch by Yuli Barcohen, 19 Apr 2004:
1912 - Rename DUET_ADS to MPC885ADS
1913 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
1914 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
1915 - Clean up FADS family port to use the new defines
1917 * Fix PCI support on CPC45 board
1919 * Patch by Scott McNutt, 25 Apr 2004:
1920 Add Nios GDB/JTAG Console support:
1921 - Add stubs to support gdb via JTAG.
1922 - Add support for console over JTAG.
1925 * Add support for CATcenter board (based on PPChameleon ME module)
1927 * Patch by Klaus Heydeck, 12 May 2004:
1928 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
1929 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
1930 various changes to KUP4 board specific files
1932 * Fix minor network problem on MPC5200: need some delay between
1933 resetting the PHY and sending the first packet. Implemented in a
1934 "natural" way by invoking the PHY reset and initialization code
1935 only once after power on vs. each time the interface is brought up.
1937 * Add some limited support for low-speed devices to SL811 USB controller
1938 (at least "usb reset" now passes successfully and "usb info" displays
1939 correct information)
1941 * Change init sequence for multiple network interfaces: initialize
1942 on-chip interfaces before external cards.
1944 * Fix memory leak in the NAND-specific JFFS2 code
1946 * Fix SL811 USB controller when attached to a USB hub
1948 * Fix config option spelling in PM520 config file
1950 * Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
1951 patches by Pantelis Antoniou, 30 Mar 2004)
1953 * Fix minor NAND JFFS2 related issue
1955 * Fixes for SL811 USB controller:
1956 - implement workaround for broken memory stick
1957 - improve error handling
1959 * Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
1960 cope with congested networks.
1962 ======================================================================
1963 Changes for U-Boot 1.1.1:
1964 ======================================================================
1966 * Patch by Travis Sawyer, 23 Apr 2004:
1967 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
1968 errata from Vitesse Semiconductor.
1970 * Patch by Philippe Robin, 22 Apr 2004:
1971 Fix ethernet configuration for "versatile" board
1973 * Patch by Kshitij Gupta, 21 Apr 2004:
1974 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
1976 * Patch by Steven Scholz, 24 Feb 2004:
1977 Fix a bug in AT91RM9200 ethernet driver:
1978 The MII interface is now initialized before accessing the PHY.
1980 * Patch by John Kerl, 19 Apr 2004:
1981 Use U-boot's miiphy.h for PHY register names, rather than
1982 introducing a new header file.
1984 * Update pci_ids.h from linux-2.4.26
1986 * Patch by Masami Komiya, 19 Apr 2004:
1987 Fix problem cause by VLAN function on little endian architecture
1988 without VLAN environment
1990 * Clean up the TQM8xx_YYMHz configurations; allow to use the same
1991 binary image for all clock frequencies. Implement run-time
1992 optimization of flash access timing based on the actual bus
1995 * Modify KUP4X board configuration to use SL811 driver for USB memory
1996 sticks (including FAT / VFAT filesystem support)
1998 * Add SL811 Host Controller Interface driver for USB
2000 * Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
2002 * Patch by Pantelis Antoniou, 19 Apr 2004:
2003 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
2004 Minor patches for Intracom boards.
2006 * Patch by Christian Pell, 19 Apr 2004:
2007 cleanup support for CF/IDE on PCMCIA for PXA25X
2009 * Temporarily disabled John Kerl's extended MII command code because
2010 "miivals.h" is missing
2012 * Patches by Mark Jonas, 13 Apr 2004:
2013 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
2014 - Add sync instructions to IceCube SDRAM init code
2015 - Move SDRAM chip constants into seperate include files
2016 - Unify DDR and SDR initialization code
2017 - Unify all IceCube (Lite5xxx) target names
2019 * Patch by John Kerl, 16 Apr 2004:
2020 Enable ranges in mii command, e.g. mii read 0-1f 0 or
2021 mii read 4-7 18-1a. Also add mii dump subcommand for
2022 pretty-printing standard regs 0-5.
2024 * Patch by Stephen Williams, 16 April 2004:
2025 fix typo in JSE.h; update MAINTAINERS
2027 * Patch by Matthew S. McClintock, 14 Apr 2004:
2028 fix initdram function for utx8245 board
2030 * Patch by Markus Pietrek, 14 Apr 2004:
2031 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
2033 * Patch by Reinhard Meyer, 18 Apr 2004:
2034 provide the IDE Reset Function for EMK 5200 boards
2036 * Patch by Masami Komiya, 12 Apr 2004:
2037 fix pci_hose_write_config_{byte,word}_via_dword problems
2039 * Patch by Sangmoon Kim, 12 Apr 2004:
2040 Update max RAM size for debris board
2042 * Patch by Travis Sawyer, 08 Apr 2004:
2043 Add TLB entry for second DIMM slot on ocotea
2045 * Patch by Masami Komiya, 08 Apr 2004:
2046 add RTL8169 network driver
2048 * Patch by Dan Malek, 07 Apr 2004:
2049 - Add support for RPC/STx GP3, Motorola 8560 board
2050 - Update 85xx TSEC driver so it searches MII for first available PHY
2052 - Add functions to support console MII commands.
2054 * Patch by Tolunay Orkun, 07 Apr 2004:
2055 Move initialization of bi_iic_fast[]
2056 from board_init_f() to board_init_r()
2058 * Patch by Yasushi Shoji, 07 Apr 2004:
2059 Cleanup microblaze port
2061 * Patch by Sangmoon Kim, 07 Apr 2004:
2062 Add auto SDRAM module detection for Debris board
2064 * Patch by Rune Torgersen, 06 Apr 2004:
2065 - Fix some PCI problems on the MPC8266ADS board
2066 - Fix the location of some PCI entries in the immap structure
2068 * Patch by Yasushi Shoji, 07 Apr 2004:
2069 - add support for microblaze processors
2070 - add support for AtmarkTechno "suzaku" board
2072 * Configure PPChameleon board to use redundand environment in flash
2074 * Configure PPChameleon board to use JFFS2 NAND support.
2076 * Added support for JFFS2 filesystem (read-only) on top of NAND flash
2078 * Patch by Rune Torgersen, 16 Apr 2004:
2081 * Patches by Pantelis Antoniou, 16 Apr 2004:
2082 - add support for a new version of an Intracom board and fix
2083 various other things on others.
2084 - add verify support to the crc32 command (define
2085 CONFIG_CRC32_VERIFY to enable it)
2086 - fix FEC driver for MPC8xx systems:
2087 1. fix compilation problems for boards that use dynamic
2089 2. shut down FEC after network transfers
2090 - HUSH parser fixes:
2091 1. A new test command was added. This is a simplified version of
2092 the one in the bourne shell.
2093 2. A new exit command was added which terminates the current
2095 3. Fixed handing of $? (exit code of last executed command)
2096 - Fix some compile problems;
2097 add "once" functionality for the netretry variable
2099 * Patch by George G. Davis, 02 Apr 2004:
2100 add support for Intel Assabet board
2102 * Patch by Stephen Williams, 01 Apr 2004:
2103 Add support for Picture Elements JSE board
2105 * Patch by Christian Pell, 01 Apr 2004:
2106 Add CompactFlash support for PXA systems.
2108 * Patches by Pantelis Antoniou, 30 Mar 2004:
2109 - add auto-complete support to the U-Boot CLI
2110 - add support for NETTA and NETPHONE boards; fix NETVIA board
2111 - add support for the Epson 156x series of graphical displays
2112 (These displays are serial and not suitable for using a normal
2113 framebuffer console on them)
2114 - add infrastructure needed in order to POST any DSPs in a board
2115 - improve and fix various things in the MPC8xx FEC driver:
2116 1. The new 87x and 88x series of processors have two FECs,
2117 and the new driver supports them both.
2118 2. Another change in the 87x/88x series is support for
2119 the RMII (Reduced MII) interface. However numerous
2120 changes are needed to make it work since the PHYs
2121 are connected to the same lines. That means that
2122 you have to address them correctly over the MII
2124 3. We now correctly match the MII/RMII interface
2125 configuration to what the PHY reports.
2126 - Fix problem when readingthe MII status register. Due to the
2127 internal design of many PHYs you have to read the register
2128 twice. The problem is more apparent in 10Mbit mode.
2129 - add new mode ".jffs2s" for reading from a NAND device: it just
2130 skips over bad blocks.
2131 - add networking support for VLANs (802.1q), and CDP (Cisco
2133 - some minor patches / cleanup
2135 * Patch by Yuli Barcohen, 28 Mar 2004:
2136 - Add support for MPC8272 family including MPC8247/8248/8271/8272
2137 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
2138 - Change configuration method for MPC8260ADS family
2140 * add startup code to clear the BSS of standalone applications
2142 * Fix if / elif handling bug in HUSH shell
2144 ======================================================================
2145 Changes for U-Boot 1.1.0:
2146 ======================================================================
2148 * Patch by Mark Jonas: Remove config.tmp files only when
2149 unconfiguring the board
2151 * Adapt RMU board for bigger flash memory
2153 * Patch by Klaus Heydeck, 13 Mar 2003:
2154 Add support for KUP4X Board
2156 * Patch by Pavel Bartusek, 21 Mar 2004
2157 Add Reiserfs support
2159 * Patch by Hinko Kocevar, 20 Mar 2004
2160 - Add auto-release for SMSC LAN91c111 driver
2161 - Add save/restore of PTR and PNR regs as suggested in datasheet
2163 * Patch by Stephen Williams, 19 March 2004
2164 Increase speed of sector reads from SystemACE,
2165 shorten poll timeout and remove a useless reset
2167 * Patch by Tolunay Orkun, 19 Mar 2004:
2168 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
2171 * Patch by Brad Kemp, 18 Mar 2004:
2172 prevent machine checks during a PCI scan
2174 * Patch by Pierre Aubert, 18 Mar 2004:
2175 Fix string cleaning in IDE identification
2177 * Patch by Pierre Aubert, 18 Mar 2004:
2178 - Unify video mode handling for Chips & Technologies 69000 Video
2179 chip and Silicon Motion SMI 712/710/810 Video chip
2180 - Add selection of the video output (CRT or LCD) via 'videoout'
2181 environment variable for the Silicon Motion
2184 * Patch by Pierre Aubert, 18 Mar 2004:
2185 include/common.h typo fix
2187 * Patches by Tolunay Orkun, 17 Mar 2004:
2188 - Add support for bd->bi_iic_fast[] initialization via environment
2189 variable "i2cfast" (CONFIG_I2CFAST)
2190 - Add "i2cfast" u-boot environment variable support for csb272
2192 * Patch by Carl Riechers, 17 Mar 2004:
2193 Ignore '\0' characters in console input for use with telnet and
2196 * Patch by Leon Kukovec, 17 Mar 2004:
2197 typo fix for strswab prototype #ifdef
2199 * Patches by Thomas Viehweger, 16 Mar 2004:
2200 - show PCI clock frequency on MPC8260 systems
2201 - add FCC_PSMR_RMII flag for HiP7 processors
2202 - in do_jffs2_fsload(), take load address from load_addr if not set
2203 explicit, update load_addr otherwise
2204 - replaced printf by putc/puts when no formatting is needed
2205 (smaller code size, faster execution)
2207 * Patch by Phillippe Robin, 16 Mar 2004:
2208 avoid dereferencing NULL pointer in lib_arm/armlinux.c
2210 * Patch by Stephen Williams, 15 Mar 2004:
2211 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
2213 * Patch by Tolunay Orkun, 15 Mar 2004:
2214 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
2216 * Patch by Travis Sawyer, 15 Mar 2004:
2217 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2219 * Add start-up delay to make sure power has stabilized before
2220 attempting to switch on USB on SX1 board.
2222 * Patch by Josef Wagner, 18 Mar 2004:
2223 - Add support for MicroSys XM250 board (PXA255)
2224 - Add support for MicroSys PM828 board (MPC8280)
2225 - Add support for 32 MB Flash on PM825/826
2226 - new SDRAM refresh rate for PM825/PM826
2227 - added support for MicroSys PM520 (MPC5200)
2228 - replaced Query by Identify command in CPU86/flash.c
2229 to support 28F160F3B
2231 * Fix wrap around problem with udelay() on ARM920T
2233 * Add support for Macronix flash on TRAB board
2235 * Patch by Pierre Aubert, 15 Mar 2004:
2236 Fix buffer overflow in IDE identification
2238 * Fix power-off of LCD for out-of-band temperatures on LWMON board
2240 * Remove redundand #define in IceCube.h
2242 * Patch by Steven Scholz, 27 Feb 2004:
2243 - Adding get_ticks() and get_tbclk() for AT91RM9200
2244 - Many white space fixes in cpu/at91rm9200/interrupts.c
2246 * Patches by Steven Scholz, 20 Feb 2004:
2247 some cleanup in AT91RM9200 related code
2249 * Patches by Travis Sawyer, 12 Mar 2004:
2250 - Fix Gigabit Ethernet support for 440GX
2251 - Add Gigabit Ethernet Support to MII PHY utilities
2253 * Patch by Brad Kemp, 12 Mar 2004:
2254 Fixes for drivers/cfi_flash.c:
2255 - Better support for x8/x16 implementations
2256 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
2257 - Added defines for AMD command and address constants
2259 * Patch by Leon Kukovec, 12 Mar 2004:
2260 Fix get_dentfromdir() to correctly handle deleted dentries
2262 * Patch by George G. Davis, 11 Mar 2004:
2263 Remove hard coded network settings in TI OMAP1610 H2
2264 default board config
2266 * Patch by George G. Davis, 11 Mar 2004:
2267 add support for ADS GraphicsClient+ board.
2269 * Patch by Pierre Aubert, 11 Mar 2004:
2270 - add bitmap command and splash screen support in cfb console
2271 - add [optional] origin in the bitmap display command
2273 * Patch by Travis Sawyer, 11 Mar 2004:
2274 Fix ocotea board early init interrupt setup.
2276 * Patch by Thomas Viehweger, 11 Mar 2004:
2277 Remove redundand code; add PCI-specific bits to include/mpc8260.h
2279 * Patch by Stephan Linz, 09 Mar 2004
2280 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
2282 * Patch by George G. Davis, 9 Mar 2004:
2283 fix recent build failure for SA1100 target
2285 * Patch by Travis Sawyer, 09 Mar 2004:
2286 Support native interrupt mode for the IBM440GX.
2287 Previously it was running in 440GP compatibility mode.
2289 * Patch by Philippe Robin, 09 Mar 2004:
2290 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
2293 * Patch by Masami Komiya, 08 Mar 2004:
2294 Don't overwrite server IP address or boot file name
2295 when the boot server does not return values
2297 * Patch by Tolunay Orkun, 5 Mar 2004:
2298 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2300 * Patch by Tolunay Orkun, 5 Mar 2004:
2301 Fix early board initialization for Cogent CSB272 board
2303 * Patch by Ed Okerson, 3 Mar 2004:
2304 fix CFI flash writes for little endian systems
2306 * Patch by Reinhard Meyer, 01 Mar 2004:
2307 generalize USB and IDE support for MPC5200 with according
2308 changes to IceCube.h and TOP5200.h
2309 add Am29LV256 256 MBit FLASH support for TOP5200 boards
2310 add info about USB and IDE to README
2312 * Patch by Yuli Barcohen, 4 Mar 2004:
2313 Fix problems with GCC 3.3.x which changed handling of global
2314 variables explicitly initialized to zero (now in .bss instead of
2317 * Patch by Leon Kukovec, 02 Mar 2004:
2318 add strswab() to fix IDE LBA capacity, firmware and model numbers
2319 on little endian machines
2321 * Patch by Masami Komiya, 02 Mar 2004:
2322 - Remove get_ticks() from NFS code
2323 - Add verification of RPC transaction ID
2325 * Patch by Pierre Aubert, 02 Mar 2004:
2326 cleanup for IDE and USB drivers for MPC5200
2328 * Patch by Travis Sawyer, 01 Mar 2004:
2330 - Add IBM PPC440GX Ref Platform support (Ocotea)
2331 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
2332 Adapted to U-Boot and 440GX port
2334 - Add gracious handling of all Ethernet Pin Selections for 440GX
2335 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
2337 - Add needed bit definitions
2340 * Patch by Carl Riechers, 1 Mar 2004:
2341 Add PPC440GX prbdv0 divider to fix memory clock calculation.
2343 * Patch by Stephan Linz, 27 Feb 2004
2344 - avoid problems for targets without NFS download support
2346 * Patch by Rune Torgersen, 27 Feb 2004:
2347 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
2348 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
2349 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
2351 * Patch by Masami Komiya, 27 Feb 2004:
2352 Fix rarpboot: add autoload by NFS
2354 * Patch by Dan Eisenhut, 26 Feb 2004:
2355 fix flash_write return value in saveenv
2357 * Patch by Stephan Linz, 11 Dec 2003
2358 expand config.mk to avoid trigraph warnings on NIOS
2360 * Rename "BMS2003" board into "HMI10"
2362 * SX1 patches: use "serial#" for USB serial #; use redundand environment
2363 storage; auto-set console on USB port (using preboot command)
2365 * Add support for SX1 mobile phone; add support for USB-based console
2366 (enable with "setenv stdout usbtty; setenv stdin usbtty")
2368 * Fix LOWBOOT configuration for MPC5200 with DDR memory
2370 * Fix SDRAM timings for LITE5200 / IceCube board
2372 * Handle Auti-MDIX / connection status for INCA-IP
2374 * Fix USB problems when attempting to read 0 bytes
2376 * Patch by Travis Sawyer, 26 Feb 2004:
2377 Fix broken compile for XPEDITE1K target.
2379 * Patch by Stephan Linz, 26 Feb 2004:
2380 Bug fix for NFS code on NIOS targets
2382 * Patch by Stephen Williams, 26 Feb 2004:
2383 Break up SystemACE reads of large block counts
2385 * Patch by Pierre Aubert, 26 Feb 2004
2386 add IDE support for MPC5200
2388 * Patch by Masami Komiya, 26 Feb 2004:
2389 add autoload via NFS
2391 * Patch by Stephen Williams
2392 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
2393 elsewhere in the source.
2395 * Patch by Steven Scholz, 25 Feb 2004:
2396 - Timeouts in FPGA code should be based on CFG_HZ
2397 - Minor cleanup in code for Altera FPGA ACEX1K
2399 * Patch by Steven Scholz, 25 Feb 2004:
2400 Changed "Directory Hierarchy" section in README
2402 * Patch by Masami Komiya, 25 Feb 2004:
2403 Reduce copy count in nfs_read_reply() of NFS code
2405 * Patch by Markus Pietrek, 24 Feb 2004:
2406 NS9750 DevBoard added
2408 * Patch by Pierre Aubert, 24 Feb 2004
2409 add USB support for MPC5200
2411 * Patch by Steven Scholz, 24 Feb 2004:
2412 - fix MII commands to use values from last command
2414 * Patch by Torsten Demke, 24 Feb 2004:
2415 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2417 * Patch by Rahul Shanbhag, 19 Feb 2004:
2418 Fixes for for OMAP1610 board:
2419 - shift some IRQ specific code to platform.S file
2420 - remove duplicatewatchdog reset code from start.S
2422 * Make Auto-MDIX Support configurable on INCA-IP board
2424 * Fix license for mkimage tool
2426 * Patch by Masami Komiya, 24 Feb 2004:
2427 Update NetBootFileXferSize in NFS code
2429 * Patch by Scott McNutt, 24 Feb 2004:
2430 fix packet length in NFS code
2432 * Patch by Masami Komiy, 22 Feb 2004:
2433 Add support for NFS for file download
2435 * Patch by Andrea Scian, 17 Feb 2004:
2436 Add support for S3C44B0 processor and DAVE B2 board
2438 * Patch by Steven Scholz, 20 Feb 2004:
2439 - Add support for MII commands on AT91RM9200 boards
2440 - some cleanup in AT91RM9200 ethernet code
2442 * Patch by Peter Ryser, 20 Feb 2004:
2443 Add support for the Xilinx ML300 platform
2445 * Patch by Stephan Linz, 17 Feb 2004:
2446 Fix watchdog support for NIOS
2448 * Patch by Josh Fryman, 16 Feb 2004:
2449 Fix byte-swapping for cfi_flash.c for different bus widths
2451 * Patch by Jon Diekema, 14 Jeb 2004:
2452 Remove duplicate "FPGA Support" notes from the README file
2454 * Patches by Reinhard Meyer, 14 Feb 2004:
2455 - update board/emk tree; use common flash driver
2456 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
2457 [adapted for other PPC CPUs -- wd]
2458 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
2460 * Patch by Jon Diekema, 13 Feb 2004:
2461 Call show_boot_progress() whenever POST "FAILED" is printed.
2463 * Patch by Nishant Kamat, 13 Feb 2004:
2464 Add support for TI OMAP1610 H2 Board
2465 Fixes for cpu/arm926ejs/interrupt.c
2466 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
2467 Fix for a timer bug in OMAP1610 Innovator
2468 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
2470 * Patches by Stephan Linz, 12 Feb 2004:
2471 - add support for NIOS timer with variable period preload counter value
2472 - prepare POST framework support for NIOS targets
2474 * Patch by Denis Peter, 11 Feb 2004:
2475 add POST support for the MIP405 board
2477 * Patch by Laurent Mohin, 10 Feb 2004:
2478 Fix buffer overflow in common/usb.c
2480 * Patch by Tolunay Orkun, 10 Feb 2004:
2481 Add support for Cogent CSB272 board
2483 * Patch by Thomas Elste, 10 Feb 2004:
2484 Add support for NET+50 CPU and ModNET50 board
2486 * Patch by Sam Song, 10 Feb 2004:
2487 Fix typos in cfi_flash.c
2489 * Patch by Leon Kukovec, 10 Feb 2004
2490 Fixed long dir entry slot id calculation in get_vfatname
2492 * Patch by Robin Gilks, 10 Feb 2004:
2493 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
2494 !=, <>, <, >, <=, >=)
2496 * Fix problem with side effects in macros in include/usb.h
2498 * Patch by David Benson, 13 Nov 2003:
2499 bug 841358 - fix TFTP download size limit
2501 * Fixing bug 850768:
2502 improper flush_cache() in load_serial()
2504 * Fixing bug 834943:
2505 MPC8540 - missing volatile declarations
2507 * Patch by Stephen Williams, 09 Feb 2004:
2508 Add support for Xilinx SystemACE chip:
2509 - New files common/cmd_ace.c and include/systemace.h
2510 - Hook systemace support into cmd_fat and the partition manager
2512 * Patch by Travis Sawyer, 09 Feb 2004:
2513 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2515 * Patch by Travis Sawyer, 09 Feb 2004:
2517 - Fix PCI Indirect access for type 1 config cycles with ppc440.
2518 - Add phymode for 440 enet
2521 - Change board_pre_init to board_early_init_f
2522 - Add user flash to bus controller setup
2524 - Fix is_pci_host to check GPIO for monarch bit
2525 - Force xpedite1k to pci conventional mode (via #define option)
2527 * Patch by Brad Kemp, 4 Feb 2004:
2528 - handle the machine check that is generated during the PCI scans
2530 - define the registers used in the IMMR by the PCI subsystem.
2532 * Patch by Pierre Aubert, 03 Feb 2004:
2533 cpu/mpc5xxx/start.S: copy MBAR into SPR311
2535 * Patch by Jeff Angielski, 03 Feb 2004:
2536 Fix copy & paste error in cpu/mpc8260/pci.c
2538 * Patch by Reinhard Meyer, 24 Jan 2004:
2539 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
2541 * Add Auto-MDIX support for INCA-IP
2545 * Patch by Josef Baumgartner, 10 Feb 2004:
2546 Fixes for Coldfire port
2548 * Patch by Brad Kemp, 11 Feb 2004:
2549 Fix CFI flash driver problems
2551 * Make sure to use a bus clock divider of 2 only when running TQM8xxM
2552 modules at CPU clock frequencies above 66 MHz.
2554 * Optimize flash programming speed for LWMON (by another 100% :-)
2556 * Patch by Jian Zhang, 3 Feb 2004:
2557 - Changed the incorrect FAT12BUFSIZE
2558 - data_begin in fsdata can be negative. Changed it to be short.
2560 * Patches by Stephan Linz, 30 Jan 2004:
2561 1: - board/altera/common/flash.c:flash_erase():
2562 o allow interrupts befor get_timer() call
2563 o check-up each erased sector and avoid unexpected timeouts
2564 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
2565 o enclose sevenseg_set() in cpp condition
2566 - remove the ASMI configuration for DK1S10_standard_32 (never present)
2567 - fix some typed in mistakes in the NIOS documentation
2568 2: - split DK1C20 configuration into several header files:
2569 o two new files for each NIOS CPU description
2570 o U-Boot related part is remaining in DK1C20.h
2571 3: - split DK1S10 configuration into several header files:
2572 o two new files for each NIOS CPU description
2573 o U-Boot related part is remaining in DK1S10.h
2574 4: - Add support for the Microtronix Linux Development Kit
2575 NIOS CPU configuration at the Altera Nios Development Kit,
2576 Stratix Edition (DK-1S10)
2577 5: - Add documentation for the Altera Nios Development Kit,
2578 Stratix Edition (DK-1S10)
2579 6: - Add support for the Nios Serial Peripharel Interface (SPI)
2581 7: - Add support for the common U-Boot SPI framework at
2584 * Patch by Rahul Shanbhag, 28 Jan 2004:
2585 Fix flash protection/locking handling for OMAP1610 innovator board.
2587 * Patch by Rolf Peukert, 28 Jan 2004:
2588 fix flash write problems on CSB226 board (write with 32 bit bus width)
2590 * Patches by Mark Jonas, 16 Jan 2004:
2591 - fix rounding error when calculating baudrates for MPC5200 PSCs
2592 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
2593 time which is not supported
2595 * Patch by Yuli Barcohen, 26 Jan 2004:
2596 Allow bzip2 compression for small memory footprint boards
2598 * Patch by Brad Kemp, 21 Jan 2004:
2599 Add support for CFI flash driver for both the Intel and the AMD
2602 * Patch by Travis Sawyer, 20 Jan 2004:
2603 Fix pci bridge auto enumeration of sibling p2p bridges.
2605 * Patch by Tolunay Orkun, 12 Jan 2004:
2606 Add some delays as needed for Intel LXT971A PHY support
2608 * Patches by Stephan Linz, 09 Jan 2004:
2609 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
2610 - make DK1C20 board configuration related to ASMI conform to
2613 * Patch by Anders Larsen, 09 Jan 2004:
2615 ARM memory layout fixes: the abort-stack is now set up in the
2616 correct RAM area, and the BSS is zeroed out as it should be.
2618 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
2619 of the linker scripts are replaced by '__bss_start' and '_end',
2620 resp., which is a further step to eliminate unnecessary differences
2621 between the implementation of the CPU architectures.
2623 * Patch by liang a lei, 9 Jan 2004:
2624 Fix Intel 28F128J3 ID in include/flash.h
2626 * Patch by Masami Komiya, 09 Jan 2004:
2627 add support for TB0229 board (NEC VR4131 MIPS processor)
2629 * Patch by Leon Kukovec, 12 Dec 2003:
2630 changed extern __inline__ into static __inline__ in
2631 include/linux/byteorder/swab.h
2633 * Patch by Travis Sawyer, 30 Dec 2003:
2634 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
2635 select MDI port based on enabled EMAC device.
2636 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
2639 * Patch by Wolter Kamphuis, 15 Dec 2003:
2640 made CONFIG_SILENT_CONSOLE usable on all architectures
2642 * Disable date command on TQM866M - there is no RTC on MPC866
2644 * Fix variable CPU clock for MPC859/866 systems for low CPU clocks
2646 * Implement adaptive SDRAM timing configuration based on actual CPU
2647 clock frequency for INCA-IP; fix problem with board hanging when
2648 switching from 150MHz to 100MHz
2650 * Add PCMCIA CS support for BMS2003 board
2652 * Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
2653 see doc/README.MPC866 for details;
2654 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
2655 calculate CPU clock frequency from PLL register values.
2657 * Add support for 128 MB RAM on TQM8xxL/M modules
2659 * Fix PS/2 keyboard problem caused by statically initialized variable
2660 pointing to a location in flash
2662 * Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
2664 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
2665 before we can access it; add delay in case we are faster (with no
2668 * Cleanup of some init functions
2670 * Make sure SCC Ethernet is always stopped by the time we boot Linux
2671 to avoid Linux crashes by early packets coming in.
2673 * Accelerate flash accesses on LWMON board by using buffered writes
2675 * Fix typo in Makefile;
2676 fix problem with PARTNUM detection
2678 * Patch by Reinhard Meyer, 09 Jan 2004:
2679 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
2681 * Add support for IDE LED on BMS2003 board
2682 (exclusive with status LED!)
2684 * Add support for PS/2 keyboard (used with PS/2 multiplexor on
2687 * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
2688 Add common files for "emk" boards
2690 * Add a common get_ram_size() function and modify the the
2691 board-specific files to invoke that common implementation.
2693 ======================================================================
2694 Changes for U-Boot 1.0.1:
2695 ======================================================================
2697 * Set default clock for INCA-IP to 150 MHz
2699 * Make BMS2003 use a separate config file to avoid #ifdef mess;
2700 add I2C support; add support for DS1337 RTC
2702 * Add CompactFlash support for BMS2003 board
2704 * Add support for status LED on BMS2003 board
2706 * Patch by Scott McNutt, 02 Jan 2004:
2707 Add support for the Nios Active Serial Memory Interface (ASMI)
2710 * Patch by Andrea Marson, 16 Dec 2003:
2711 Add support for the PPChameleon ME and HI modules
2713 * Patch by Yuli Barcohen, 22 Dec 2003:
2714 Add support for Motorola DUET ADS board (MPC87x/88x)
2716 * Patch by Robert Schwebel, 15 Dec 2003:
2717 add support for cramfs (uses JFFS2 command interface)
2719 * Patches by Stephan Linz, 11 Dec 2003:
2720 - more documentation for NIOS port
2721 - new struct nios_pio_t, struct nios_spi_t
2722 - Reconfiguration for NIOS Development Kit DK1C20:
2723 o move board related code from board/dk1c20
2724 to board/altera/dk1c20
2725 o create a new common source path board/altera/common
2726 and move generic flash access stuff into it
2727 o change/expand configuration file DK1C20.h
2728 - Add support for NIOS Development Kit DK1S10
2729 - Add status LED support for NIOS systems
2730 - Add dual 7-segment LED support for Altera NIOS DevKits
2732 * Patch by Ronen Shitrit, 10 Dec 2003:
2733 Add support for the Marvell DB64360 / DB64460 development boards
2735 * Patch by Detlev Zundel, 10 Dec 2003:
2736 fix dependency problem in examples/Makefile
2738 * Patch by Denis Peter, 8 Dec 2003
2739 - add support for the PATI board (MPC555)
2740 - add SPI support for the MPC5xx
2742 * Patch by Anders Larsen, 08 Dec 2003:
2743 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
2744 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
2745 cleanup some redundand #defines
2747 * Patch by André Schwarz, 8 Dec 2003:
2748 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
2749 - TX and RX deskriptors must be quad-word aligned
2750 - does not work with only one TX deskriptor
2751 - standard reset method does not work
2753 * Patch by Masami Komiya, 08 Dec 2003:
2754 add RTL8139 ethernet driver
2756 * Patches by Ed Okerson, 07 Dec 2003:
2757 - fix ethernet for the AU1x00 processors in little-endian mode.
2758 - extend memsetup.S for the AU1x00 processors in BE and LE modes
2760 * Minor code cleanup (coding style)
2762 * Patch by Reinhard Meyer, 30 Dec 2003:
2763 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
2764 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
2765 - turned debug print of PHY registers into a function (called in two places)
2766 - added support for EMK MPC5200 based modules
2768 * Fix MPC8xx PLPRCR_MFD_SHIFT typo
2770 * Add support for TQM866M modules
2772 * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
2774 * Fix a few compiler warnings
2776 * Patch by Reinhard Meyer, 28 Dec 2003:
2777 Add initial support for TOP5200 board
2779 * Make CPU clock on ICA-IP board controllable by a "cpuclk"
2780 environment variable which can set to "100", "133", or "150". The
2781 CPU clock will be configured accordingly upon next reboot. Other
2782 values are ignored. In case of an invalid or undefined "cpuclk"
2783 value, the compile-time default CPU clock speed will be used.
2785 * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
2786 window that is used to access the UART registers by the Linux driver)
2788 * Patch by Reinhard Meyer, 20 Dec 2003:
2789 Fix clock calculation for the MPC5200 for higher clock frequencies
2790 (above 2**32 / 10 = 429.5 MHz).
2792 * Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
2794 * Fix IceCube CLKIN configuration (it's 33.000000MHz)
2796 * Add new configuration for IceCube board with DDR memory
2798 * Update TRAB memory configurations
2800 * Add JFFS2 support for INCA-IP board
2802 * Patch by Bill Hargen, 09 Dec 2003:
2803 - BUBINGA405EP: changed flash driver to protect top sector containing
2805 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
2806 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
2807 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
2808 - 405EP: added/fixed support for "reginfo" command.
2809 - 4xx: removed spurious MII error messages on "mii info" command.
2811 * Patch by Bernhard Kuhn, 28 Nov 2003:
2812 add support for Coldfire CPU
2813 add support for Motorola M5272C3 and M5282EVB boards
2815 * Patch by Pierre Aubert, 24 Nov 2003:
2816 - add a return value for the fpga command
2817 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
2818 is defined. If ide_preinit fails, ide_init is aborted.
2819 - fix an endianess problem in fat.h
2821 * Patch by Wolter Kamphuis, 05 Dec 2003:
2822 Add support for SNMC's QS850/QS823/QS860T boards
2824 * Patch by Yuli Barcohen, 3 Dec 2003:
2825 "revive" U-Boot support for old Motorola MPC860ADS board
2827 * Patch by Cam(ilo?), 03 Dec 2003:
2828 make examples build even with broken Montavista objcopy
2830 * Patch by Pavel Bartusek, 27 Nov 2003:
2831 fix conversion problem with "bootretry" evironment variable
2833 * Patch by Andre Schwarz, 24 Nov 2003:
2834 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
2836 * Patch by Pavel Bartusek, 21 Nov 2003:
2837 set ZMII bridge speed on 440
2839 * Patch by Anders Larsen, 17 Nov 2003:
2840 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
2842 * Patches by David Müller, 14 Nov 2003:
2843 - board/mpl/common/common_util.c
2844 * implement support for BZIP2 compressed images
2845 * various cleanups (printf -> puts, ...)
2846 - board/mpl/common/flash.c
2847 * report correct errors to upper layers
2848 * check the erase fail and VPP low bits in status reg
2849 - board/mpl/vcma9/cmd_vcma9.c
2850 - board/mpl/vcma9/flash.c
2851 * various cleanups (printf -> puts, ...)
2853 * fix typo in comment
2854 - cpu/arm920t/usb_ohci.c
2855 * support for S3C2410 is missing in #if line
2857 * reinit some registers in case of error (cable missing, ...)
2859 * support for USB/MMC devices is missing in #if line
2860 - include/configs/MIP405.h
2861 - include/configs/PIP405.h
2862 * enable BZIP2 support
2863 * enlarge malloc space to 1MiB because of BZIP2 support
2864 - include/configs/VCMA9.h
2865 * enable BZIP2 support
2866 * enlarge malloc space to 1MiB because of BZIP2 support
2867 * enable USB support
2868 - lib_arm/armlinux.c
2869 * change calling convention of ARM Linux kernel as
2870 described on http://www.arm.linux.org.uk/developer/booting.php
2872 * Patch by Thomas Lange, 14 Nov 2003:
2873 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
2874 support all these AMD boards.
2876 * Patch by Thomas Lange, 14 Nov 2003:
2877 Workaround for mips au1x00 physical memory accesses (the au1x00
2878 uses a 36 bit bus internally and cannot access physical memory
2879 directly. Use the uncached SDRAM address instead of the physical
2882 * Patch by Xue Ligong (Joe), 13 Nov 2003:
2883 add Realtek 8019 ethernet driver
2885 * Patch by Yuli Barcohen, 13 Nov 2003:
2886 MPC826xADS/PQ2FADS cleanup
2888 * Patch by Anders Larsen, 12 Nov 2003:
2889 Update README to mark the PORTIO commands non-standard
2891 * Patch by Nicolas Lacressonnière, 12 Nov 2003:
2892 update for for Atmel AT91RM9200DK development kit:
2893 - support for environment variables in DataFlash
2894 - Atmel DataFlash AT45DB1282 support
2896 * Patch by Jeff Carr, 11 Nov 2003:
2897 add support for new version of 8270 processors
2899 * Patches by George G. Davis, 05 Nov 2003:
2900 - only pass the ARM linux initrd tag to the kernel when an initrd
2902 - update omap1510inn configuration file
2904 * Patches by Stephan Linz, 3 Nov 2003:
2905 - more endianess fixes for LAN91C111 driver
2906 - CFG_HZ configuration patch for NIOS Cyclone board
2908 * Patch by Stephan Linz, 28 Oct 2003:
2909 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
2911 * Patch by Steven Scholz, 20 Oct 2003:
2912 - make "mii info <addr>" show infor for PHY at "addr" only
2913 - Endian fix for miiphy_info()
2915 * Patch by Gleb Natapov, 19 Sep 2003:
2916 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
2918 * Patch by Anders Larsen, 17 Sep 2003:
2919 Bring ARM memory layout in sync with the documentation:
2920 stack and malloc-heap are now located _below_ the U-Boot code
2922 * Accelerate booting on TRAB board: read and check autoupdate image
2923 headers first instead of always reading the whole images.
2925 * Fix type in MPC5XXX code (pointed out by Victor Wren)
2927 * Enabled password check on RMU board
2929 * Fix configuration problem with IceCube in LOWBOOT configuration:
2930 envrionment got embedded, corrupting the image layout.
2932 * Fix NEC display names (it's 6440 [for 640x480], not 6640).
2934 * Added BMS2003 board
2935 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
2937 * Fix flash driver for TRAB board (must use Unlock Bypass Reset
2938 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
2941 * Use "-fPIC" instead of "-mrelocatable" to prevent problems with
2944 * Add checksum verification to 'imls' command
2946 * Add bd_info fields needed for 4xx Linux I2C driver
2948 * Patch by Martin Krause, 4 Nov. 2003:
2949 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
2951 * Print used network interface when CONFIG_NET_MULTI is set
2953 * Patch by Bernhard Kuhn, 28 Oct 2003:
2954 Add low boot support for MPC5200
2956 * Fix problem with dual PCMCIA support (NSCU)
2958 * Fix MPC5200 I2C initialization function
2960 ======================================================================
2961 Changes for U-Boot 1.0.0:
2962 ======================================================================
2964 * Fix parameter passing to standalone images with bootm command
2966 * Patch by Kyle Harris, 30 Oct 2003:
2967 Fix build errors for ixdp425 board
2969 * Patch by David M. Horn, 29 Oct 2003:
2970 Fixes to build under CYGWIN
2972 * Get IceCube MGT5100 working (again)
2974 * Fix problems in memory test on some boards (which was not
2975 non-destructive as intended)
2977 * Patch by Gary Jennejohn, 28 Oct 2003:
2978 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
2979 to prevent stack overflow on ARM systems
2981 * Patch by Stephan Linz, 28 Oct 2003:
2982 fix init sequence error for NIOS port
2984 * Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
2986 * Add CONFIG_VERSION_VARIABLE to TRAB configuration
2988 * Patch by Xiao Xianghua, 23 Oct 2003:
2989 small patch for mpc85xx
2991 * Fix small problem in MPC5200 I2C driver
2993 * Fix FCC3 support on ATC board
2995 * Correct header printing for multi-image files in do_bootm()
2997 * Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
2999 * Fix PCI problems on PPChameleon board
3001 * Patch by Steven Scholz, 18 Oct 2003:
3002 Fix AT91RM9200 ethernet driver
3004 * Patch by Nye Liu, 17 Oct 2003:
3005 Fix typo in include/mpc8xx.h
3007 * Patch by Richard Woodruff, 16 Oct 03:
3008 Fixes for cpu/arm925/interrupt.c
3009 - Initialize timestamp & lastdec vars.
3010 - fix timestamp overflows.
3011 - fix lastdec overflow.
3012 - smarter normalization to allow udelay() below 1ms to work.
3014 * Patch by Scott McNutt, 16 Oct
3015 add networking support for the Altera Nios Development Kit,
3016 Cyclone Edition (DK-1C20)
3018 * Patch by Jon Diekema, 14 Oct 2003:
3019 add hint about doc/README.silent to README file
3021 * Add CompactFlash support for NSCU
3023 * Fix PCI problems on PPChameleonEVB
3025 * TRAB auto-update: Base decision if we have to strip the image
3026 header on image type as encoded in the header
3027 (include image type patch by Martin Krause, 17 Oct 2003)
3029 * Patches by Xianghua Xiao, 15 Oct 2003:
3031 - Added Motorola CPU 8540/8560 support (cpu/85xx)
3032 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
3033 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
3035 * Fix flash timings on TRAB board
3037 * Make sure HUSH is initialized for running auto-update scripts
3039 * Make 5200 reset command _really_ reset the board, without running
3040 any other code after it
3042 * Fix errors with flash erase when range spans across banks
3043 that are mapped in reverse order
3045 * Fix flash mapping and display on P3G4 board
3047 * Patch by Kyle Harris, 15 Jul 2003:
3048 - add support for Intel IXP425 CPU
3049 - add support for IXDP425 eval board
3051 * Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
3052 for more information
3054 * Patch by Steven Scholz, 10 Oct 2003
3055 - Add support for Altera FPGA ACEX1K
3057 * Patches by Thomas Lange, 09 Oct 2003:
3058 - fix cmd_ide.c for non ppc boards (read/write functions did not
3059 add ATA base address)
3060 - fix for shannon board
3061 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
3062 - Endian swap ATA identity for all big endian CPUs, not just PPC
3063 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
3065 - add support for dbau1x00 board (MIPS32)
3067 * Patch by Sangmoon Kim, 07 Oct 2003:
3068 add support for debris board
3070 * Patch by Martin Krause, 09 Oct 2003:
3071 Fixes for TRAB board
3072 - /board/trab/rs485.c: correct baudrate
3073 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
3074 udelay(); fix some timing problems with adc controller
3075 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
3076 modify commands: touch and buzzer
3078 * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
3079 (quick & dirty workaround for rogue pointer problem in get_vfatname());
3080 Use direct function calls for auto_update instead of hush commands
3082 * Patch by Scott McNutt, 04 Oct 2003:
3083 - add support for Altera Nios-32 CPU
3084 - add support for Nios Cyclone Development Kit (DK-1C20)
3086 * Patch by Steven Scholz, 29 Sep 2003:
3087 - A second parameter for bootm overwrites the load address for
3088 "Standalone Application" images.
3089 - bootm sets environment variable "filesize" to the resulting
3090 (uncompressed) data length for "Standalone Application" images
3091 when autostart is set to "no". Now you can do something like
3092 if bootm $fpgadata $some_free_ram ; then
3093 fpga load 0 $some_free_ram $filesize
3096 * Patch by Denis Peter, 25 Sept 2003:
3097 add support for the MIP405 Rev. C board
3099 * Patch by Yuli Barcohen, 25 Sep 2003:
3100 add support for Zephyr Engineering ZPC.1900 board
3102 * Patch by Anders Larsen, 23 Sep 2003:
3103 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
3104 implemented for the x86 architecture)
3106 * Patch by Sangmoon Kim, 23 Sep 2003:
3107 fix pll_pci_to_mem_multiplier table for MPC8245
3109 * Patch by Anders Larsen, 22 Sep 2003:
3110 enable timed autoboot on PXA
3112 * Patch by David Müller, 22 Sep 2003:
3113 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
3114 returns correct libgcc file path
3115 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
3116 time on s3c24x0 systems
3118 * Patch by Jon Diekema, 19 Sep 2003:
3119 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
3120 link state to the fault LED.
3121 - In NetLoop, make the Fault LED reflect the link status. The link
3122 status gets updated on entry, and on timeouts.
3124 * Patch by Anders Larsen, 18 Sep 2003:
3125 allow mkimage to build and run on Cygwin-hosted systems
3127 * Patch by Frank Müller, 18 Sep 2003:
3128 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
3131 * Patch by Pantelis Antoniou, 16 Sep 2003:
3132 add tool to compute fileds in the PLPRCR register for MPC86x
3134 * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
3136 * Fix build problems under FreeBSD
3138 * Add generic filesystem image type
3140 * Make fatload set filesize environment variable
3142 * enable basic / medium / high-end configurations for PPChameleonEVB
3143 board; fix NAND code
3145 * enable TFTP client code to specify to the server the desired
3146 timeout value (see RFC-2349)
3148 * Improve SDRAM setup for TRAB board
3150 * Suppress all output with splashscreen configured only if "splashimage"
3153 * Fix problems with I2C support for mpc5200
3155 * Adapt TRAB configuration and auto_update to new memory layout
3157 * Add configuration for wtk board
3159 * Add support for the Sharp LQ065T9DR51U LCD display
3161 * Patch by Rune Torgersen, 17 Sep 2003:
3162 - Fixes for MPC8266 default config
3163 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
3165 * Patches by Jon Diekema, 17 Sep 2003:
3166 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
3169 - adjust "help" output
3171 * Patches by Anders Larsen, 17 Sep 2003:
3172 - fix spelling errors
3173 - set GD_FLG_DEVINIT flag only after device function pointers
3175 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
3177 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
3178 - trigger watchdog while waiting in serial driver
3180 * Add auto-update code for TRAB board using USB memory sticks,
3181 support new configuration with more memory
3183 * disable MPC5200 bus pipelining as workaround for bus contention
3185 * Modify XLB arbiter priorities on MPC5200 so all devices use same
3186 priority; configure critical interrupts to be handled like external
3189 * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
3190 go back to 66 MHz for stability
3192 * Patches by Jon Diekema, 15 Sep 2003:
3193 - add description for missing CFG_CMD_* entries in the README file
3196 * Patch by Gleb Natapov, 14 Sep 2003:
3197 enable watchdog support for all MPC824x boards that have a watchdog
3199 * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
3200 "Non-octet Aligned Frame" errors we see at 100 Mbps
3202 * Patch by Sharad Gupta, 14 Sep 2003:
3203 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
3205 * Patch by llandre, 11 Sep 2003:
3206 update configuration for PPChameleonEVB board
3208 * Patch by David Müller, 13 Sep 2003:
3209 various changes to VCMA9 board specific files
3211 * Add I2C support for MGT5100 / MPC5200
3213 * Patch by Rune Torgersen, 11 Sep 2003:
3214 Changed default memory option on MPC8266ADS to NOT be Page Based
3215 Interleave, since this doesn't work very well with the standard
3218 * Patch by George G. Davis, 12 Sep 2003:
3219 fix Makefile settings for sk98 driver
3221 * Patch by Stefan Roese, 12 Sep 2003:
3222 - new boards added: DP405, HUB405, PLU405, VOH405
3223 - some esd boards updated
3224 - cpu/ppc4xx/sdram.c: disable memory controller before setting
3226 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
3228 * Patch by Martin Krause, 11 Sep 2003:
3229 add burn-in tests for TRAB board
3231 * Enable instruction cache on MPC5200 board
3233 * Patch by Denis Peter, 11 Sep 2003:
3234 - fix USB data pointer assignment for bulk only transfer.
3235 - prevent to display erased directories in FAT filesystem.
3237 * Change output format for NAND flash - make it look like for other
3240 ======================================================================
3241 Changes for U-Boot 0.4.8:
3242 ======================================================================
3244 * Add I2C and RTC support for RMU board
3246 * Patches by Denis Peter, 9 Sep 2003:
3247 add FAT support for IDE, SCSI and USB
3249 * Patches by Gleb Natapov, 2 Sep 2003:
3250 - cleanup of POST code for unsupported architectures
3251 - MPC824x locks way0 of data cache for use as initial RAM;
3252 this patch unlocks it after relocation to RAM and invalidates
3255 * Patch by Gleb Natapov, 30 Aug 2003:
3256 new I2C driver for mpc107 bridge. Now works from flash.
3258 * Patch by Dave Ellis, 11 Aug 2003:
3259 - JFFS2: fix typo in common/cmd_jffs2.c
3260 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
3261 - JFFS2: remove node version 0 warning
3262 - JFFS2: accept JFFS2 PADDING nodes
3263 - SXNI855T: add AM29LV800 support
3264 - SXNI855T: move environment from EEPROM to flash
3265 - SXNI855T: boot from JFFS2 in NOR or NAND flash
3267 * Patch by Bill Hargen, 11 Aug 2003:
3268 fixes for I2C on MPC8240
3269 - fix i2c_write routine
3270 - fix iprobe command
3271 - eliminates use of global variables, plus dead code, cleanup.
3273 * Add support for USB Mass Storage Devices (BBB)
3274 (tested with USB memory sticks only)
3276 * Avoid flicker on TRAB's VFD
3278 * Add support for SK98xx driver
3280 * Add PCI support for SL8245 board
3282 * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
3283 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
3284 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
3286 * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
3287 to allow for more accurate baudrate settings
3288 (error now 0.7% at 115 kbps, instead of 3.5% before)
3290 * Patch by Andreas Mohr, 4 Sep 2003:
3291 Fix a lot of spelling errors
3293 * Add support for PPChameleon Eval Board
3295 * Add support for P3G4 board
3297 * Fix problem with MGT5100 FEC driver: add "early" MAC address
3300 * Patch by Yuli Barcohen, 7 Aug 2003:
3301 check BCSR to detect if the board is configured in PCI mode
3303 ======================================================================
3304 Changes for U-Boot 0.4.7:
3305 ======================================================================
3307 * Patch by Raghu Krishnaprasad, 7 Aug 2003:
3308 add support for Adder II MPC852T module
3310 * Patch by George G. Davis, 19 Aug 2003:
3311 fix TI Innovator/OMAP1510 pin configs
3313 * Patches by Kshitij, 18 Aug 2003
3314 - add support for arm926ejs cpu core
3315 - add support for TI OMAP 1610 Innovator Board
3317 * Patch by Yuli Barcohen, 14 Aug 2003:
3318 add support for bzip2 uncompression
3320 * Add GCC library to examples/Makefile so GCC utility functions will
3323 * Add I2C and RTC support for RMU board using software I2C driver
3324 (because of better response to iprobe command); fix problem with
3327 * Patch by Matthias Fuchs, 28 Aug 2003:
3328 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
3329 CONFIG_BOOTP_MAKS (see README).
3331 * Fix ICU862 environment problem
3333 * Fix RAM size detection for RMU board
3335 * Implement "reset" for MGT5100/MPC5200 systems
3337 ======================================================================
3338 Changes for U-Boot 0.4.6:
3339 ======================================================================
3341 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
3342 allow selection of clock frequency as "make" target
3344 * Implement memory autosizing code for IceCube boards
3346 * Configure network port on INCA-IP for autonegotiation
3348 * Fix overflow problem in network timeout code
3350 * Patch by Richard Woodruff, 8 Aug 2003:
3351 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
3353 ======================================================================
3354 Changes for U-Boot 0.4.5:
3355 ======================================================================
3357 * Update for TQM board defaults:
3358 disable clocks_in_mhz, enable boot count limit
3360 * Removed tools/gdb from "make all" target. Added make target "gdbtools"
3361 in toplevel directory instead. Removed astest.c from tools/gdb because
3362 it is no longer relevant.
3364 * Fix PCI support for MPC5200 / IceCube Board
3366 * Map ISP1362 USB OTG controller for NSCU board
3368 * Patch by Brad Parker, 02 Aug 2003:
3369 fix sc520_cdp problems
3371 * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
3373 * Allow erase command to cross flash bank boundaries
3375 * Patch by Scott McNutt, 21 Jul 2003:
3376 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
3377 Both LynxOS and BlueCat linux KDIs are supported.
3379 * Patch by Richard Woodruff, 25 Jul 2003:
3380 use more reliable reset for OMAP/925T
3382 * Patch by Nye Liu, 25 Jul 2003:
3383 fix typo in mpc8xx.h
3385 * Patch by Richard Woodruff, 24 Jul 2003:
3386 Fixes for cmd_nand.c:
3387 - Fixed null dereferece which could result in incorrect ECC values.
3388 - Added support for devices with no Ready/Busy signal hooked up.
3389 - Added OMAP1510 read/write protect handling.
3390 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
3392 - Switched default ECC to be JFFS2.
3394 * Allow crc32 to be used at address 0x000
3396 * Provide consistent interface to standalone applications to access
3397 the 'global_data' structure
3398 Provide a doc/README.standalone more useful to users/developers.
3400 * Make IceCube MGT5100 FEC driver work
3402 * Implement new mechanism to export U-Boot's functions to standalone
3403 applications: instead of using (PPC-specific) system calls we now
3404 use a jump table; please see doc/README.standalone for details
3406 * Patch by Dave Westwood, 24 Jul 2003:
3407 added support for Unity OS (a proprietary OS)
3409 * Patch by Detlev Zundel, 23 Jul 2003:
3410 add "imls" command to print flash table of contents
3412 * Fix cold boot detection for log buffer reset
3414 * Return error for invalid length specifiers with "cp.X" etc.
3416 * Fix startup problem on MIPS
3418 * Allow for CONFIG_SPLASH_SCREEN even when no explicit
3419 bitmap support is configured
3421 * Patch by Bill Hargen, 18 Jul 2003:
3422 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
3424 * Patch by Denis Peter, 18 Jul 2003:
3425 - fix memory configuration for MIP405T
3426 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
3428 * Cleanup of TQM82xx configurations; use "official" board types
3429 to make selection easier.
3431 * Patch by Martin Krause, 17 Jul 2003:
3432 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
3434 * Patch by Richard Woodruff, 17 July 03:
3435 - Fixed bug in OMAP1510 baud rate divisor settings.
3437 * Patch by Nye Liu, 16 July 2003:
3439 - add MPC86xADS support (uses MPC86xADS.h)
3440 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
3442 o BRG changes (EXTAL/XTAL restricted to 10MHz)
3443 o don't trust gclk() software measurement by default, depend on
3444 CONFIG_8xx_GCLK_FREQ
3445 - add DRAM SIMM not installed detection
3446 - use more "correct" SDRAM initialization sequence
3447 - allow different SDRAM sizes (8xxADS has 8M)
3449 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
3450 - rename MAMR/MBMR defines to be more consistent. Should eventually
3451 be merged into MxMR to better reflect the PowerQUICC datasheet.
3453 * Patch by Yuli Barcohen, 16 Jul 2003:
3454 support new Motorola PQ2FADS-ZU evaluation board which replaced
3455 MPC8260ADS and MPC8266ADS
3457 ======================================================================
3458 Changes for U-Boot 0.4.4:
3459 ======================================================================
3461 * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
3463 * Add support for MGT5100 and MPC5200 processors
3465 * Patch by Lutz Dennig, 15 Jul 2003:
3466 update for R360MPI board
3468 ======================================================================
3469 Changes for U-Boot 0.4.3:
3470 ======================================================================
3472 * Patches by Kshitij, 04 Jul 2003
3473 - added support for arm925t cpu core
3474 - added support for TI OMAP 1510 Innovator Board
3476 * Patches by Martin Krause, 14 Jul 2003:
3477 - add I2C support for s3c2400 systems (trab board)
3478 - (re-) add "ping" to command table
3480 * Fix handling of "slow" POST routines
3482 * Patches by Yuli Barcohen, 13 Jul 2003:
3483 - Correct flash and JFFS2 support for MPC8260ADS
3484 - fix PVR values and clock generation for PowerQUICC II family
3487 * Patch by Bernhard Kuhn, 08 Jul 2003:
3488 - add support for M68K targets
3490 * Patch by Ken Chou, 3 Jul:
3491 - Fix PCI config table for A3000
3492 - Fix iobase for natsemi.c
3493 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
3495 * Allow to enable "slow" POST routines by key press on power-on
3496 * Fix temperature dependend switching of LCD backlight on LWMON
3497 * Tweak output format for LWMON
3499 * Patch by Stefan Roese, 11 Jul 2003:
3500 - Fix bug in CONFIG_VERSION_VARIABLE.
3501 - AR405 config updated.
3502 - OCRTC/ORSG: bsp command added.
3503 - ASH405 bsp update.
3505 ======================================================================
3506 Changes for U-Boot 0.4.2:
3507 ======================================================================
3509 * Add support for NSCU board
3511 * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
3513 * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
3514 mirror bit flash on TQM8xxM modules
3516 * Patch by Kenneth Johansson, 30 Jun 2003:
3517 get rid of MK_CMD_ENTRY macro; update doc/README.command
3519 * Patch by Seb James, 30 Jun 2003:
3520 Improve documentation of I2C configuration in README
3522 * Fix problems with previous log buffer "fixes"
3524 * Fix minor help text issues
3526 * "log append" did not append a newline
3528 ======================================================================
3529 Changes for U-Boot 0.4.1:
3530 ======================================================================
3532 * Fix some missing commands, cleanup header files
3533 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
3535 * Rewrite command lookup and help command (fix problems with bubble
3536 sort when sorting command name list). Minor cleanup here and there.
3538 * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
3539 - Allow to call sysmon function interactively
3540 - PIC on LWMON board needs delay after power-on
3541 - Add missing RSR definitions for MPC8xx
3542 - Improve log buffer handling: guarantee clean reset after power-on
3543 - Add support for EXBITGEN board (aka "genie")
3544 - Add support for SL8245 board
3547 - remove trailing white space, trailing empty lines, C++ comments, etc.
3548 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
3550 * Patches by Kenneth Johansson, 25 Jun 2003:
3551 - major rework of command structure
3552 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
3554 ======================================================================
3555 Changes for U-Boot 0.4.0:
3556 ======================================================================
3558 * Patches by Robert Schwebel, 26 Jun 2003:
3559 - csb226 configuration updated
3560 - credits for logodl port updated
3561 - innokom configuration updated
3562 - logodl tree update, still with coding style inconsistencies
3563 - added OCM for ppc405 warning to README
3565 * Patch by Pantelis Antoniou, 25 Jun 2003:
3566 update NetVia with V2 board support
3568 * Header file cleanup for ARM
3570 * Patch by Murray Jensen, 24 Jun 2003:
3571 - make sure to use only U-boot provided header files
3572 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
3574 * Patch by Stefan Roese, 24 Jun 2003:
3575 - Update esd ASH405 board files.
3576 - Update esd DASA_SIM config file.
3577 - Add ping command to some esd boards.
3579 * Patch by Yuli Barcohen, 23 Jun 2003:
3580 Update for MPC8260ADS board
3582 * Patch by Murray Jensen, 23 Jun 2003:
3583 - cleanup of GCC 3.x compiler warnings
3585 * Patch by Rune Torgersen, 4 Jun 2003:
3586 add large memory support for MPC8266ADS board
3588 * Patch by Richard Woodruff, 19 June 03:
3589 - Enabled standard u-boot device abstraction for ARM
3590 - Enabled console device for ARM
3591 - Initilized bi_baudrate for ARM
3593 * Patch by Bill Hargen, 23 Apr 2003:
3594 fix byte order for 824x I2C addresses (write op)
3596 * Patch by Murray Jensen, 20 Jun 2003:
3598 - cleanup (especially for gcc-3.x compilers)
3600 * Patch by Tom Guilliams, 20 Jun 2003:
3601 added CONFIG_750FX support for IBM 750FX processors
3603 * Patch by Devin Crumb, 02 Apr 2003:
3604 Fix clock divider rounding problem in drivers/serial.c
3606 * Patch by Richard Woodruff, 19 June 03:
3607 - Fixed smc91c111 driver to sync with the u-boot environment
3608 (driver/smc91c111.c).
3609 - Added eth_init error return check in NetLoop (net/net.c).
3611 * Patch by Ken Chou, 19 June 2003:
3612 Added support for A3000 SBC board (Artis Microsystems Inc.)
3614 * Patches by Murray Jensen, 17 Jun 2003:
3615 - Hymod board database mods: add "who" field and new xilinx chip types
3616 - provide new "init_cmd_timeout()" function so code external to
3617 "common/main.c" can use the "reset_cmd_timeout()" function before
3618 entering the main loop
3619 - add DTT support for adm1021 (new file dtt/adm1021.c; config
3620 slightly different. see include/configs/hymod.h for an example
3621 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
3622 CFG_DTT_ADM1021 defined)
3623 - add new "eeprom_probe()" function which has similar args and
3624 behaves in a similar way to "eeprom_read()" etc.
3625 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
3626 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
3627 - gdbtools copyright update
3628 - ensure that set_msr() executes the "sync" and "isync" instructions
3629 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
3630 - 8260 I/O ports fix: Open Drain should be set last when configuring
3631 - add SIU IRQ defines for 8260
3632 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
3633 config.mk to allow board configurations to override the GNU
3634 linker script, selected via the LDSCRIPT, make variable, and to
3635 give an initial value to the OBJCFLAGS make variable
3636 - 8260 i2c enhancement:
3637 o correctly extends the timeout depending on the size of all
3638 queued messages for both transmit and receive
3639 o will not continue with receive if transmit times out
3640 o ensures that the error callback is done for all queued tx
3642 o correctly detects both tx and rx timeouts, only delivers one to
3643 the callback, and does not overwrite an earlier error
3644 o logic in i2c_probe now correct
3645 - add "vprintf()" function so that "panic()" function can be
3647 - many Hymod board changes
3649 * Patches by Robert Schwebel, 14 Jun 2003:
3650 - add support for Logotronic DL datalogger board
3651 - cleanup serial line after kermit binary download
3652 - add debugX macro (debug level support)
3653 - update mach-types.h to latest arm.linux.org.uk master list.
3655 * Patches by David Müller, 12 Jun 2003:
3656 - rewrite of the S3C24X0 register definitions stuff
3657 - "driver" for the built-in S3C24X0 RTC
3659 * Patches by Yuli Barcohen, 12 Jun 2003:
3660 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
3661 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
3662 configuration word supplied by FPGA on some MPC8260ADS boards
3664 * Patch by Pantelis Antoniou, 10 Jun 2003:
3665 Unify status LED interface
3667 * Add support for DS12887 RTC; add RTC support for ATC board
3669 * Patch by Nicolas Lacressonniere, 11 Jun 2003:
3670 Modifications for Atmel AT91RM9200DK ARM920T based development kit
3671 - Add Atmel DataFlash support for reading and writing.
3672 - Add possibility to boot a Linux from DataFlash with BOOTM command.
3673 - Add Flash detection on Atmel AT91RM9200DK
3674 (between Atmel AT49BV1614 and AT49BV1614A flashes)
3675 - Replace old Ethernet PHY layer functions
3676 - Change link address
3678 * Patch by Frank Smith, 9 Jun 2003:
3679 use CRIT_EXCEPTION for machine check on 4xx
3681 * Patch by Detlev Zundel, 13 Jun 2003:
3682 added implementation of the "carinfo" command in cmd_immap.c
3684 * Fix CONFIG_NET_MULTI support in include/net.h
3686 * Patches by Kyle Harris, 13 Mar 2003:
3687 - Add FAT partition support
3688 - Add command support for FAT
3689 - Add command support for MMC
3691 - Add Intel PXA support for video
3692 - Add Intel PXA support for MMC
3694 - Enable MMC and FAT for lubbock board
3695 - Other misc changes for lubbock board
3697 * Patch by Robert Schwebel, April 02, 2003:
3698 fix for SMSC91111 driver
3700 * Patch by Vladimir Gurevich, 04 Jun 2003:
3701 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
3703 * Patch by Stefan Roese, 05 Jun 2003:
3704 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
3705 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
3706 data cache can be used even if the chip select is in use.
3707 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
3708 (see README for further description).
3709 - Changed config files of CONFIG_EEPRO100 boards to use the
3710 CFG_RX_ETH_BUFFER define.
3712 * Add support for RMU board
3714 * Add support for TQM862L at 100/50 MHz
3716 * Patch by Pantelis Antoniou, 02 Jun 2003:
3717 major reconstruction of networking code;
3718 add "ping" support (outgoing only!)
3720 * Patch by Denis Peter, 04 June 2003:
3721 add support for the MIP405T board
3723 * Patches by Udi Finkelstein, 2 June 2003:
3724 - Added support for custom keyboards, initialized by defining a
3725 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
3726 - Added support for the RBC823 board.
3727 - cpu/mpc8xx/lcd.c now automatically calculates the
3728 Horizontal Pixel Count field.
3730 * Fix alignment problem in BOOTP (dhcp_leasetime option)
3731 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
3733 * Patch by Mark Rakes, 14 May 2003:
3734 add support for Intel e1000 gig cards.
3736 * Patch by Nye Liu, 3 Jun 2003:
3737 fix critical typo in MAMR definition (include/mpc8xx.h)
3739 * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
3741 * Patch by Klaus Heydeck, 2 Jun 2003
3742 Minor changes for KUP4K configuration
3744 * Patch by Marc Singer, 29 May 2003:
3745 Fixed rarp boot method for IA32 and other little-endian CPUs.
3747 * Patch by Marc Singer, 28 May 2003:
3748 Added port I/O commands.
3750 * Patch by Matthew McClintock, 28 May 2003
3751 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
3752 - minor patches for utx8245
3754 * Patch by Daniel Engström, 28 May 2003:
3757 * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
3758 add nand flash support to SXNI855T configuration
3759 fix/extend nand flash support:
3760 - fix 'nand erase' command so does not erase bad blocks
3761 - fix 'nand write' command so does not write to bad blocks
3762 - fix nand_probe() so handles no flash detected properly
3763 - add doc/README.nand
3764 - add .jffs2 and .oob options to nand read/write
3765 - add 'nand bad' command to list bad blocks
3766 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
3767 - make NAND read/write faster
3769 * Patch by Rune Torgersen, 23 May 2003:
3770 Update for MPC8266ADS board
3772 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
3773 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
3774 _time_ (!) if the environment is embedded within the U-Boot image,
3775 or in a separate flash sector.
3777 * Cleanup CFG_DER #defines in config files (wd maintained only)
3779 * Fix data abort exception handling for arm920t CPU
3781 * Fix alignment problems with flash driver for TRAB board
3783 * Patch by Donald White, 21 May 2003:
3784 fix calculation of base address in pci_hose_config_device()
3786 * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
3787 execute "cmd2", even if "cmd1" fails. Note that this is different
3788 to "run var1 var2" where the contents of "var2" will NOT be
3789 executed when a command in "var1" fails.
3791 * Add zero-copy ramdisk support (requires corresponding kernel support!)
3793 * Patch by Kyle Harris, 20 May 2003:
3794 In preparation for an ixp port, rename cpu/xscale and arch-xscale
3795 into cpu/pxa and arch-pxa.
3797 * Patch by Stefan Roese, 23 May 2003:
3798 - IBM PPC405EP port added.
3799 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
3800 UART0) is used as default U-Boot console. PPC4xx only!
3801 - esd ASH405 board added (PPC405EP based).
3802 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
3803 - esd CPCI405AB board added.
3804 - esd PMC405 board added.
3805 - Update of some esd boards.
3807 * Patch by Denis Peter, 19 Mai 2003:
3808 add support for the MIP405-3 board
3810 * Patch by Dave Ellis, 22 May 2003:
3811 Fix problem with only partially cleared .bss segment
3813 * Patch by Rune Torgersen, 12 May 2003:
3814 get PCI to work on a MPC8266ADS board; incorporate change to
3815 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
3817 * Patch by Nye Liu, 1 May 2003:
3818 minor patches for the FADS8xx
3820 * Patch by Thomas Schäfer, 28 Apr 2003:
3821 Fix SPD handling for 256 ECC DIMM on Walnut
3823 * Add support for arbitrary bitmaps for TRAB's VFD command;
3824 allow to pass boot bitmap addresses in environment variables;
3825 allow for zero boot delay
3827 * Patch by Christian Geißinger, 19 May 2002:
3828 On TRAB: wait until the dummy byte has been completely sent
3830 * Patch by David Updegraff, 22 Apr 2003:
3831 update for CrayL1 board
3833 * Patch by Pantelis Antoniou, 21 Apr 2003:
3834 add boot support for ARTOS (a proprietary OS)
3836 * Patch by Steven Scholz, 11 Apr 2003:
3837 Add support for RTC DS1338
3839 * Patch by Rod Boyce, 24 Jan 2003:
3840 Fix counting of extended partitions in diskboot command
3842 * Patch by Christophe Lindheimer, 20 May 2003:
3843 allow the use of CFG_LOADS when CFG_NO_FLASH is set
3845 * Fix SDRAM timing on Purple board
3847 * Add support for CompactFlash on ATC board
3848 (includes support for Intel 82365 and compatible PC Card controllers,
3849 and Yenta-compatible PCI-to-CardBus controllers)
3851 * Patch by Mathijs Haarman, 08 May 2003:
3852 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
3854 * Fix problem with usage of "true" (undefined in current versions of bfd.h)
3856 * Add support for Promess ATC board
3858 * Patch by Keith Outwater, 28 Apr 2003:
3859 - Miscellaneous corrections and additions to GEN860T board specific code.
3860 - Added GEN860_SC variant to GEN860T.
3861 - Miscellaneous corrections to GEN860T documentation.
3862 - Correct duplicate entry in U-Boot CREDITS file.
3863 - Add GEN860T_SC entry in MAINTAINERS file.
3864 - Update CREDITS file with GEN860T_SC info.
3866 * Update Smiths Aerospace addresses in MAINTAINERS file
3868 * Fix error handling in hush's version of "run" command
3871 - Splashscreen support
3874 - temperature dependend enabling of LCD
3876 * Allow booting from old "PPCBoot" disk partitions
3878 * Add support for TQM8255 Board / MPC8255 CPU
3880 ======================================================================
3881 Changes for U-Boot 0.3.1:
3882 ======================================================================
3884 * Make sure Block Lock Bits get cleared in R360MPI flash driver
3886 * MPC823 LCD driver: Fill color map backwards, to allow for steady
3887 display when Linux takes over
3889 * Patch by Erwin Rol, 27 Feb 2003:
3890 Add support for RTEMS (this time for real).
3892 * Add support for "bmp info" and "bmp display" commands to load
3893 bitmap images; this can be used (for example in a "preboot"
3894 command) to display a splash screen very quickly after poweron.
3896 * Add support for 133 MHz clock on INCA-IP board
3898 * Patch by Lutz Dennig, 10 Apr 2003:
3899 Update for R360MPI board
3901 * Add new meaning to "autostart" environment variable:
3902 If set to "no", a standalone image passed to the
3903 "bootm" command will be copied to the load address
3904 (and eventually uncompressed), but NOT be started.
3905 This can be used to load and uncompress arbitrary
3908 * Patch by Stefan Roese, 10 Apr 2003:
3909 Changed DHCP client to use IP address from server option field #54
3910 from the OFFER packet in the server option field #54 in the REQUEST
3911 packet. This fixes a problem using a Windows 2000 DHCP server,
3912 where the DHCP-server is not the TFTP-server.
3914 * Set max brightness for MN11236 displays on TRAB board
3916 * Add support for TQM862L modules
3918 ======================================================================
3919 Changes for U-Boot 0.3.0:
3920 ======================================================================
3922 * Patch by Arun Dharankar, 4 Apr 2003:
3923 Add IDMA example code (tested on 8260 only)
3925 * Add support for Purple Board (MIPS64 5Kc)
3927 * Add support for MIPS64 5Kc CPUs
3929 * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
3931 * Patch by Denis Peter, 04 Apr 2003:
3932 - update MIP405-4 board
3934 * Patch by Stefan Roese, 4 Apr 2003:
3935 - U-Boot version environment variable "ver" added
3936 (CONFIG_VERSION_VARIABLE).
3937 - Changed PPC405GPr version from A to B.
3938 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
3940 * Patches by Denis Peter, 03 April 2003:
3941 - fix PCI IRQs on MPL boards
3942 - fix two more un-relocated pointer problems
3944 * Fix behaviour of "run" command:
3945 - print error message iv variable does not exist
3946 - terminate processing of arguments in case of error
3948 * Patches by Peter Figuli, 10 Mar 2003
3949 - Add support for BTUART on PXA platform
3950 - Add support for WEP EP250 (PXA) board
3952 * Fix flash problems on INCA-IP; add tool to allow bruning images to
3953 flash using a BDI2000
3955 * Implement fix for I2C Edge Conditions problem for all boards that
3956 use the bit-banging driver (common/soft_i2c.c)
3958 * Patch by Martin Winistoerfer, 23 Mar 2003
3959 - Add port to MPC555/556 microcontrollers
3960 - Add support for cmi customer board with
3961 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
3963 * Patch by Rick Bronson, 28 Mar 2003:
3964 - fix common/cmd_nand.c
3966 * Patch by Arun Dharankar, 24 Mar 2003:
3967 - add threads / scheduler example code
3969 * Add patches by Robert Schwebel, 31 Mar 2003:
3970 - add ctrl-c support for kermit download
3971 - align bdinfo output on ARM
3972 - csb226 board: bring in sync with innokom/memsetup.S
3973 - csb226 board: fix MDREFR handling
3974 - misc doc fixes / extensions
3975 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
3976 - add BOOT_PROGRESS to armlinux.c
3978 * Add CPU ID, version, and clock speed for INCA-IP
3980 * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
3981 - fix SRAM and SDRAM memory sizing
3982 - add status LED support
3983 - add MAC address for second (SCC1) ethernet port
3985 * Update default environment for TQM8260 board
3987 * Patch by Rick Bronson, 16 Mar 2003:
3988 - Add NAND flash support for reading, writing, and erasing NAND
3989 flash (certain forms of which are called SmartMedia).
3990 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
3992 * Patches by Robert Schwebel, 19 Mar 2003:
3993 - use arm-linux-gcc as default compiler for ARM
3994 - fix i2c fixup code
3995 - fix missing baudrate setting
3996 - added $loadaddr / CFG_LOAD_ADDR support to loadb
3997 - moved "ignoring trailing characters" _before_ u-boot wants to
3998 print out diagnostics messages; removes bogus characters at the
4001 * Patch by John Zhan, 18 Mar 2003:
4002 Add support for SinoVee Microsystems SC8xx boards
4004 * Patch by Rolf Offermanns, 21 Mar 2003:
4005 ported the dnp1110 related changes from the current armboot cvs to
4006 current u-boot cvs. smc91111 does not work. problem marked in
4007 smc91111.c, grep for "FIXME".
4009 * Patch by Brian Auld, 25 Mar 2003:
4010 Add support for STM flash chips on ebony board
4012 * Add PCI support for MPC8250 Boards (PM825 module)
4014 * Patch by Stefan Roese, 25 Mar 2003:
4017 * Patch by Stefan Roese, 20 Mar 2003:
4018 - CPCI4052 update (support for revision 3).
4019 - Set edge conditioning circuitry on PPC405GPr for compatibility
4020 to existing PPC405GP designs.
4021 - Clip udiv to 5 bits on PPC405 (serial.c).
4023 * Extend INCAIP board support:
4024 - add automatic RAM size detection
4025 - add "bdinfo" command
4026 - pass flash address and size to Linux kernel
4027 - switch to 150 MHz clock
4029 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
4030 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
4031 boards, version 153 for Rev. 200 boards).
4033 * Patch by Vladimir Gurevich, 12 Mar 2003:
4034 Fix relocation problem of statically initialized string pointers
4037 * Patch by Kai-Uwe Blöm, 12 Mar 2003:
4038 Cleanup & bug fixes for JFFS2 code:
4039 - the memory mangement was broken. It caused havoc on malloc by
4040 writing beyond the block boundaries.
4041 - the length calculation for files was wrong, sometimes resulting
4042 in short file reads.
4043 - data copying now optionally takes fragment version numbers into
4044 account, to avoid copying from older data.
4045 See doc/README.JFFS2 for details.
4047 * Patch by Josef Wagner, 12 Mar 2003:
4048 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
4049 - ETH05 and BEDBUG support for CU824
4050 - added support for MicroSys CPC45
4051 - new BOOTROM/FLASH0 and DOC base for PM826
4053 * Patch by Robert Schwebel, 12 Mar 2003:
4054 Fix the chpart command on innokom board
4057 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
4058 s/PPCBoot/U-Boot/ in some files
4059 s/pImage/uImage/ in some files
4061 * Patch by Detlev Zundel, 15 Jan 2003:
4062 Fix '' command line quoting
4064 * Patch by The LEOX team, 19 Jan 2003:
4065 - add support for the ELPT860 board
4066 - add support for Dallas ds164x RTC
4068 * Patches by David Müller, 31 Jan 2003:
4069 - minimal setup for CardBus bridges
4070 - add EEPROM read/write support in the CS8900 driver
4071 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
4072 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
4074 * Patch by Steven Scholz, 04 Feb 2003:
4075 add support for RTC DS1307
4077 * Patch by Reinhard Meyer, 5 Feb 2003:
4078 fix PLPRCR/SCCR init sequence on 8xx to allow for
4079 changes of EBDF by software
4081 * Patch by Vladimir Gurevich, 07 Feb 2003:
4082 "API-compatibility patch" for 4xx I2C driver
4084 * TRAB fixes / extensions:
4085 - Restore VFD brightness as saved in environment
4086 - add support for Fujitsu flashes
4087 - make sure both buzzers are turned off (drive low level)
4089 * Patches by Robert Schwebel, 06 Mar 2003:
4090 - fix bug in BOOTP code (must use NetCopyIP)
4091 - update of CSB226 port
4092 - clear BSS segment on XScale
4093 - added support for i2c_init_board() function
4094 - update to the Innokom plattform
4096 * Extend support for redundand environments for configurations where
4097 environment size < sector size
4099 * Patch by Rune Torgersen, 13 Feb 2003:
4100 Add support for Motorola MPC8266ADS board
4102 * Patch by Kyle Harris, 19 Feb 2003:
4103 patches for the Intel lubbock board:
4104 memsetup.S - general cleanup (based on Robert's csb226 code)
4105 flash.c - overhaul, actually works now
4106 lubbock.c - fix init funcs to return proper value
4108 * Patch by Kenneth Johansson, 26 Feb 2003:
4109 - Fixed off by one in RFTA calculation.
4110 - No need to abort when LDF is lower than we can program it's only
4111 minimum timing so clamp it to what we can do.
4112 - Takes function pointer to function for reading the spd_nvram. Usefull
4113 for faking data or hardcode a module without the nvram.
4114 - fix other user for above change
4115 - fix some comments.
4117 * Patches by Brian Waite, 26 Feb 2003:
4118 - fix port for evb64260 board
4119 - fix PCI for evb64260 board
4122 * Patch by Reinhard Meyer, 1 Mar 2003:
4123 Add support for EMK TOP860 Module
4125 * Patch by Yuli Barcohen, 02 Mar 2003:
4126 Add SPD EEPROM support for MPC8260ADS board
4128 * Patch by Robert Schwebel, 21 Jan 2003:
4129 - Add support for Innokom board
4130 - Don't complain if "install" fails
4131 - README cleanup (remove duplicated lines)
4132 - Update PXA header files
4134 * Add documentation for existing POST code (doc/README.POST)
4136 * Patch by Laudney Ren, 15 Jan 2003:
4137 Fix handling of redundand environment in "tools/envcrc.c"
4139 * Patch by Detlev Zundel, 28 Feb 2003:
4140 Add bedbug support for 824x systems
4142 * Add support for 16 MB flash configuration of TRAB board
4144 * Patch by Erwin Rol, 27 Feb 2003:
4145 Add support for RTEMS
4147 * Add image information to README
4149 * Patch by Stefan Roese, 18 Feb 2003:
4150 CPCIISER4 configuration updated.
4152 * Patch by Stefan Roese, 17 Feb 2003:
4153 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
4155 * Patch by Stefan Roese, 13 Feb 2003:
4156 Add "pcidelay" environment variable (in ms, enabled via
4157 CONFIG_PCI_BOOTDELAY).
4158 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
4159 RST# to respond to configuration cycles (33MHz -> 1s).
4161 * Fix dual PCMCIA slot support (when running with just one
4164 * Add VFD type detection to trab board
4166 * extend drivers/cs8900.c driver to synchronize ethaddr environment
4167 variable with value in the EEPROM
4169 * Patch by Stefan Roese, 10 Feb 2003:
4170 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
4172 * Add support for MIPS32 4Kc CPUs
4174 * Add support for INCA-IP Board
4176 ======================================================================
4177 Changes for U-Boot 0.2.2:
4178 ======================================================================
4180 * Add dual ethernet support on PM826
4182 * Add support for LXT971 PHY on PM826
4184 * Patch by Tord Andersson, 16 Jan 2003:
4185 Fix flash sector count for TQM8xxL
4187 * Fix I2C EEPROM problem on ICU862 board (would only write the first
4188 16 bytes out of each 32 byte block)
4190 ======================================================================
4191 Changes for U-Boot 0.2.1:
4192 ======================================================================
4194 * Add support for V37 board
4195 (patch by Jón Benediktsson, 11 Dec 2002)
4197 * Update baudrate in bd_info when it gets changed
4199 * Add watchdog trigger points while waiting for serial port
4200 (so far only 8xx -- needed on LWMON with 100ms watchdog)
4202 * Improve command line tool to access the U-Boot's environment
4203 (figuration of the utility, using a config file)
4205 * Add single quote support for (old) command line parser
4207 * Switch LWMON board default config from FRAM to EEPROM;
4208 in POST, EEPROM shows up on 8 addresses
4210 ======================================================================
4211 Changes for U-Boot 0.2.0:
4212 ======================================================================
4214 * Use 1-byte-read instead of -write for iprobe() function
4215 Add i2c commands to PM826 config
4217 * extend I2C POST code: check for list on known addresses
4219 * Improve log buffer code; use "loglevel" to decide which messages
4220 to log on the console, too (like in Linux); get rid of "logstart"
4222 * Add command line tool to access the U-Boot's environment
4223 (board-specific for TRAB now, to be fixed later)
4225 * Patch by Hans-Joerg Frieden, 06 Dec 2002
4226 Fix misc problems with AmigaOne support
4228 * Patch by Chris Hallinan, 3 Dec 2002:
4229 minor cleanup to the MPC8245 EPIC driver
4231 * Patch by Pierre Aubert , 28 Nov 2002
4232 Add support for external (SIU) interrupts on MPC8xx
4234 * Patch by Pierre Aubert , 28 Nov 2002
4235 Fix nested syscalls bug in standalone applications
4237 * Patch by David Müller, 27 Nov 2002:
4238 fix output of "pciinfo" command for CardBus bridge devices.
4240 * Fix bug in TQM8260 board detection - boards got stuck when board ID
4243 * Add LED indication for IDE activity on KUP4K board
4245 * Fix startup problems with VFD display on TRAB
4247 * Patch by Pierre Aubert, 20 Nov 2002
4248 Add driver for Epson SED13806 graphic controller.
4249 Add support for BMP logos in cfb_console driver.
4251 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
4253 * Patch by Rod Boyce, 21 Nov 2002:
4254 fix PCMCIA on MBX8xx board
4256 * Patch by Pierre Aubert , 21 Nov 2002
4257 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
4258 bootmode word in DPRAM configurable
4260 * Patch by Daniel Engström, 18 Nov 2002:
4261 Fixes for x86 port (mostly strings issues)
4263 * Patch by Ken Chou, 18 Nov 2002:
4264 Fix for natsemi NIC cards (DP83815)
4266 * Patch by Pierre Aubert, 19 Nov 2002:
4267 fix a bug for the MII configuration, and some warnings
4269 * Patch by Thomas Frieden, 13 Nov 2002:
4270 Add code for AmigaOne board
4271 (preliminary merge to U-Boot, still WIP)
4273 * Patch by Jon Diekema, 12 Nov 2002:
4274 - Adding URL for IEEE OUI lookup
4275 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
4277 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
4278 root-on-nfs macros are designed to switch how the default boot
4279 method gets defined.
4281 * Patch by Daniel Engström, 13 Nov 2002:
4282 Add support for i386 architecture and AMD SC520 board
4284 * Patch by Pierre Aubert, 12 Nov 2002:
4285 Add support for DOS filesystem and booting from DOS floppy disk
4287 * Patch by Jim Sandoz, 07 Nov 2002:
4288 Increase number of network RX buffers (PKTBUFSRX in
4289 "include/net.h") for EEPRO100 based boards (especially SP8240)
4290 which showed "Receiver is not ready" errors when U-Boot was
4291 processing the receive buffers slower than the network controller
4294 * Patch by Andreas Oberritter, 09 Nov 2002:
4295 Change behaviour of NetLoop(): return -1 for errors, filesize
4296 otherwise; return code 0 is valid an means no file loaded - in this
4297 case the environment still gets updated!
4299 * Patches by Jon Diekema, 9 Nov 2002:
4300 - improve ADC/DAC clocking on the SACSng board to align
4301 the failing edges of LRCLK and SCLK
4302 - sbc8260 configuration tweaks
4303 - add status LED support for 82xx systems
4304 - wire sspi/sspo commands into command handler; improved error
4306 - add timestamp support and alternate memory test to the
4307 SACSng configuration
4309 * Patch by Vince Husovsky, 7 Nov 2002:
4310 Add "-n" to linker options to get rid of "Not enough room for
4311 program headers" problem
4313 * Patch by David Müller, 05 Nov 2002
4314 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
4315 so we can use an already existing name
4317 * Patch by Pierre Aubert, 05 Nov 2002
4318 Hardware relatied improvments in FDC boot code
4320 * Patch by Holger Schurig, 5 Nov 2002:
4321 Make the PXA really change it's frequency
4323 * Patch by Pierre Aubert, 05 Nov 2002
4324 Add support for slave serial Spartan 2 FPGAs
4326 * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
4329 * Add support for log buffer which can be passed to Linux kernel's
4330 syslog mechanism; used especially for POST results.
4332 * Patch by Klaus Heydeck, 31 Oct 2002:
4333 Add initial support for kup4k board
4335 * Patch by Robert Schwebel, 04 Nov 2002:
4336 - use watchdog to reset PXA250 systems
4337 - added progress callbacks to (some of the) ARM code
4338 - update for Cogent CSB226 board
4340 * Add support for FPS860 board
4342 * Patch by Guillaume Alexandre,, 04 Nov 2002:
4343 Improve PCI access on 32-bits Compact PCI bus
4345 * Fix mdelay() on TRAB - this was still the debugging version with
4346 seconds instead of ms.
4348 * Patch by Robert Schwebel, 1 Nov 2002:
4349 XScale related cleanup (affects all ARM boards)
4351 * Cleanup of names and README.
4353 ======================================================================
4354 Notes for U-Boot 0.1.0:
4355 ======================================================================
4357 This is the initial version of "Das U-Boot", the Universal Boot Loader.
4359 It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
4360 For information about the history of the project please see the
4361 PPCBoot project page at http://sourceforge.net/projects/ppcboot
4363 ======================================================================