4 This document describes a collection of device-mapper targets that
5 between them implement thin-provisioning and snapshots.
7 The main highlight of this implementation, compared to the previous
8 implementation of snapshots, is that it allows many virtual devices to
9 be stored on the same data volume. This simplifies administration and
10 allows the sharing of data between volumes, thus reducing disk usage.
12 Another significant feature is support for an arbitrary depth of
13 recursive snapshots (snapshots of snapshots of snapshots ...). The
14 previous implementation of snapshots did this by chaining together
15 lookup tables, and so performance was O(depth). This new
16 implementation uses a single data structure to avoid this degradation
17 with depth. Fragmentation may still be an issue, however, in some
20 Metadata is stored on a separate device from data, giving the
21 administrator some freedom, for example to:
23 - Improve metadata resilience by storing metadata on a mirrored volume
24 but data on a non-mirrored one.
26 - Improve performance by storing the metadata on SSD.
31 These targets are very much still in the EXPERIMENTAL state. Please
32 do not yet rely on them in production. But do experiment and offer us
33 feedback. Different use cases will have different performance
34 characteristics, for example due to fragmentation of the data volume.
36 If you find this software is not performing as expected please mail
37 dm-devel@redhat.com with details and we'll try our best to improve
40 Userspace tools for checking and repairing the metadata are under
46 This section describes some quick recipes for using thin provisioning.
47 They use the dmsetup program to control the device-mapper driver
48 directly. End users will be advised to use a higher-level volume
49 manager such as LVM2 once support has been added.
54 The pool device ties together the metadata volume and the data volume.
55 It maps I/O linearly to the data volume and updates the metadata via
58 - Function calls from the thin targets
60 - Device-mapper 'messages' from userspace which control the creation of new
61 virtual devices amongst other things.
63 Setting up a fresh pool device
64 ------------------------------
66 Setting up a pool device requires a valid metadata device, and a
67 data device. If you do not have an existing metadata device you can
68 make one by zeroing the first 4k to indicate empty metadata.
70 dd if=/dev/zero of=$metadata_dev bs=4096 count=1
72 The amount of metadata you need will vary according to how many blocks
73 are shared between thin devices (i.e. through snapshots). If you have
74 less sharing than average you'll need a larger-than-average metadata device.
76 As a guide, we suggest you calculate the number of bytes to use in the
77 metadata device as 48 * $data_dev_size / $data_block_size but round it up
78 to 2MB if the answer is smaller. If you're creating large numbers of
79 snapshots which are recording large amounts of change, you may find you
80 need to increase this.
82 The largest size supported is 16GB: If the device is larger,
83 a warning will be issued and the excess space will not be used.
85 Reloading a pool table
86 ----------------------
88 You may reload a pool's table, indeed this is how the pool is resized
89 if it runs out of space. (N.B. While specifying a different metadata
90 device when reloading is not forbidden at the moment, things will go
91 wrong if it does not route I/O to exactly the same on-disk location as
94 Using an existing pool device
95 -----------------------------
98 --table "0 20971520 thin-pool $metadata_dev $data_dev \
99 $data_block_size $low_water_mark"
101 $data_block_size gives the smallest unit of disk space that can be
102 allocated at a time expressed in units of 512-byte sectors. People
103 primarily interested in thin provisioning may want to use a value such
104 as 1024 (512KB). People doing lots of snapshotting may want a smaller value
105 such as 128 (64KB). If you are not zeroing newly-allocated data,
106 a larger $data_block_size in the region of 256000 (128MB) is suggested.
107 $data_block_size must be the same for the lifetime of the
110 $low_water_mark is expressed in blocks of size $data_block_size. If
111 free space on the data device drops below this level then a dm event
112 will be triggered which a userspace daemon should catch allowing it to
113 extend the pool device. Only one such event will be sent.
114 Resuming a device with a new table itself triggers an event so the
115 userspace daemon can use this to detect a situation where a new table
116 already exceeds the threshold.
121 i) Creating a new thinly-provisioned volume.
123 To create a new thinly- provisioned volume you must send a message to an
124 active pool device, /dev/mapper/pool in this example.
126 dmsetup message /dev/mapper/pool 0 "create_thin 0"
128 Here '0' is an identifier for the volume, a 24-bit number. It's up
129 to the caller to allocate and manage these identifiers. If the
130 identifier is already in use, the message will fail with -EEXIST.
132 ii) Using a thinly-provisioned volume.
134 Thinly-provisioned volumes are activated using the 'thin' target:
136 dmsetup create thin --table "0 2097152 thin /dev/mapper/pool 0"
138 The last parameter is the identifier for the thinp device.
143 i) Creating an internal snapshot.
145 Snapshots are created with another message to the pool.
147 N.B. If the origin device that you wish to snapshot is active, you
148 must suspend it before creating the snapshot to avoid corruption.
149 This is NOT enforced at the moment, so please be careful!
151 dmsetup suspend /dev/mapper/thin
152 dmsetup message /dev/mapper/pool 0 "create_snap 1 0"
153 dmsetup resume /dev/mapper/thin
155 Here '1' is the identifier for the volume, a 24-bit number. '0' is the
156 identifier for the origin device.
158 ii) Using an internal snapshot.
160 Once created, the user doesn't have to worry about any connection
161 between the origin and the snapshot. Indeed the snapshot is no
162 different from any other thinly-provisioned device and can be
163 snapshotted itself via the same method. It's perfectly legal to
164 have only one of them active, and there's no ordering requirement on
165 activating or removing them both. (This differs from conventional
166 device-mapper snapshots.)
168 Activate it exactly the same way as any other thinly-provisioned volume:
170 dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 1"
175 All devices using a pool must be deactivated before the pool itself
190 thin-pool <metadata dev> <data dev> <data block size (sectors)> \
191 <low water mark (blocks)> [<number of feature args> [<arg>]*]
193 Optional feature arguments:
194 - 'skip_block_zeroing': skips the zeroing of newly-provisioned blocks.
196 Data block size must be between 64KB (128 sectors) and 1GB
197 (2097152 sectors) inclusive.
202 <transaction id> <used metadata blocks>/<total metadata blocks>
203 <used data blocks>/<total data blocks> <held metadata root>
207 A 64-bit number used by userspace to help synchronise with metadata
208 from volume managers.
210 used data blocks / total data blocks
211 If the number of free blocks drops below the pool's low water mark a
212 dm event will be sent to userspace. This event is edge-triggered and
213 it will occur only once after each resume so volume manager writers
214 should register for the event and then check the target's status.
217 The location, in sectors, of the metadata root that has been
218 'held' for userspace read access. '-' indicates there is no
219 held root. This feature is not yet implemented so '-' is
226 Create a new thinly-provisioned device.
227 <dev id> is an arbitrary unique 24-bit identifier chosen by
230 create_snap <dev id> <origin id>
232 Create a new snapshot of another thinly-provisioned device.
233 <dev id> is an arbitrary unique 24-bit identifier chosen by
235 <origin id> is the identifier of the thinly-provisioned device
236 of which the new device will be a snapshot.
240 Deletes a thin device. Irreversible.
242 set_transaction_id <current id> <new id>
244 Userland volume managers, such as LVM, need a way to
245 synchronise their external metadata with the internal metadata of the
246 pool target. The thin-pool target offers to store an
247 arbitrary 64-bit transaction id and return it on the target's
248 status line. To avoid races you must provide what you think
249 the current transaction id is when you change it with this
250 compare-and-swap message.
257 thin <pool dev> <dev id>
260 the thin-pool device, e.g. /dev/mapper/my_pool or 253:0
263 the internal device identifier of the device to be
266 The pool doesn't store any size against the thin devices. If you
267 load a thin target that is smaller than you've been using previously,
268 then you'll have no access to blocks mapped beyond the end. If you
269 load a target that is bigger than before, then extra blocks will be
270 provisioned as and when needed.
272 If you wish to reduce the size of your thin device and potentially
273 regain some space then send the 'trim' message to the pool.
277 <nr mapped sectors> <highest mapped sector>