1 * Maxim MAX8973 Voltage Regulator
5 - compatible: must be one of following:
8 - reg: the i2c slave address of the regulator. It should be 0x1b.
10 Any standard regulator properties can be used to configure the single max8973
15 -maxim,externally-enable: boolean, externally control the regulator output
17 -maxim,enable-gpio: GPIO for enable control. If the valid GPIO is provided
18 then externally enable control will be considered.
19 -maxim,dvs-gpio: GPIO which is connected to DVS pin of device.
20 -maxim,dvs-default-state: Default state of GPIO during initialisation.
21 1 for HIGH and 0 for LOW.
22 -maxim,enable-remote-sense: boolean, enable reote sense.
23 -maxim,enable-falling-slew-rate: boolean, enable falling slew rate.
24 -maxim,enable-active-discharge: boolean: enable active discharge.
25 -maxim,enable-frequency-shift: boolean, enable 9% frequency shift.
26 -maxim,enable-bias-control: boolean, enable bias control. By enabling this
27 startup delay can be reduce to 20us from 220us.
32 compatible = "maxim,max8973";
35 regulator-min-microvolt = <935000>;
36 regulator-max-microvolt = <1200000>;