1 RedBoot for Starter-Kit V (STK5)
4 ===========================================================
8 - add support for Toshiba NAND flash
9 - implement workaround for ENGcm12051 (DPLL: Meta-stability Issue)
11 - fix CCGR0 settings to enable JTAG interface
15 Fix FEC driver handling of 10BaseT link
19 Added support for TX53
24 Added support for redundant WinCE image load
29 Added support for splash screen, enabled with:
30 fconfig bootsplash_enable true
32 Name Default Value Description
33 lcd_bpp: 16 LCD color depth (only 16bpp for now)
34 lcd_buffer_addr: -2113929216 LCD frame buffer address (hex: 0x82000000)
35 lcd_clk_period: 33333 Pixel clock period (in ps)
36 lcd_clk_polarity: false Pixel clock polarity active low
37 lcd_panel_width: 640 LCD panel width (in pixels)
38 lcd_panel_height: 480 LCD panel height (in pixels)
39 lcd_hsync_polarity: true HSYNC polarity active low
40 lcd_hsync_width: 64 HSYNC pulse width (in pixels): 1 .. 64
41 lcd_margin_left: 96 Left margin (in pixels): 1 .. 256
42 lcd_margin_right: 80 Right margin (in pixels): 1 .. 256
43 lcd_margin_top: 46 Top margin (in scan lines): 0 .. 255
44 lcd_margin_bottom: 39 Bottom margin (in scan lines): 0 .. 255
45 lcd_vsync_polarity: true VSYNC polarity active low
46 lcd_vsync_width: 3 VSYNC pulse width (in scan lines): 0 .. 63
48 Image data is loaded from the flash partition named 'logo' and
49 can be stored either as a binary dump or in Windows .bmp
52 Renamed config/TX25-40x0.ecc to config/TX25-40x1.ecc to be in
53 sync with the module name
58 Added support for TX51-80x2 and TX51-80x1 (SDRAM clock selectable via cdl)
63 Fixed SDRAM timing according to application note from Micron.
65 Fixed display of reset reason.
66 Corrected DEBUG LED settings
68 Disabled FIS CRC check to facilitate update of the Linux
69 partition from within Linux (see RedBoot/README)
73 Added support for TX51-80x0
77 Corrected SDRAM timing setup for TX25 that was accidentally broken
78 in the previous release
82 switched to unified source tree for TX25,TX27,TX37
83 fixing some issues with bad block handling on TX27
87 Corrected the SDRAM initialisation for TX27-4021 (128MiB SDRAM)
92 Fixed a bug that lead to writing the RedBoot config partition on
93 every startup which would lead to excessive wearout of the flash.
94 The patch ecos-tx27-update.patch should be applied before compiling
99 + 'RedBoot config' partition merged with 'FIS Directory' into one
101 + improved bad block handling
102 + Flash partitioning changed due to the above
103 NOTE: The Linux kernel expects the RedBoot partition table at a
104 fixed block in flash determined by a configuration option.
105 Thus the new RedBoot version will only work with the new
107 + MAC address stored in processor internal fuse array
108 + new command: 'nand bad' to manually update the BBT