]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/arm/boot/dts/imx27-apf27.dts
Merge tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
[karo-tx-linux.git] / arch / arm / boot / dts / imx27-apf27.dts
1 /*
2  * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
3  * Copyright 2012 Armadeus Systems <support@armadeus.com>
4  *
5  * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
6  *
7  * The code contained herein is licensed under the GNU General Public
8  * License. You may obtain a copy of the GNU General Public License
9  * Version 2 or later at the following locations:
10  *
11  * http://www.opensource.org/licenses/gpl-license.html
12  * http://www.gnu.org/copyleft/gpl.html
13  */
14
15 /dts-v1/;
16 #include "imx27.dtsi"
17
18 / {
19         model = "Armadeus Systems APF27 module";
20         compatible = "armadeus,imx27-apf27", "fsl,imx27";
21
22         memory {
23                 reg = <0xa0000000 0x04000000>;
24         };
25
26         clocks {
27                 #address-cells = <1>;
28                 #size-cells = <0>;
29
30                 osc26m {
31                         compatible = "fsl,imx-osc26m", "fixed-clock";
32                         #clock-cells = <0>;
33                         clock-frequency = <0>;
34                 };
35         };
36 };
37
38 &iomuxc {
39         imx27-apf27 {
40                 pinctrl_fec1: fec1grp {
41                         fsl,pins = <
42                                 MX27_PAD_SD3_CMD__FEC_TXD0 0x0
43                                 MX27_PAD_SD3_CLK__FEC_TXD1 0x0
44                                 MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
45                                 MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
46                                 MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
47                                 MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
48                                 MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
49                                 MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
50                                 MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
51                                 MX27_PAD_ATA_DATA7__FEC_MDC 0x0
52                                 MX27_PAD_ATA_DATA8__FEC_CRS 0x0
53                                 MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
54                                 MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
55                                 MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
56                                 MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
57                                 MX27_PAD_ATA_DATA13__FEC_COL 0x0
58                                 MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
59                                 MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
60                         >;
61                 };
62
63                 pinctrl_uart1: uart1grp {
64                         fsl,pins = <
65                                 MX27_PAD_UART1_TXD__UART1_TXD 0x0
66                                 MX27_PAD_UART1_RXD__UART1_RXD 0x0
67                         >;
68                 };
69         };
70 };
71
72 &uart1 {
73         pinctrl-names = "default";
74         pinctrl-0 = <&pinctrl_uart1>;
75         status = "okay";
76 };
77
78 &fec {
79         pinctrl-names = "default";
80         pinctrl-0 = <&pinctrl_fec1>;
81         status = "okay";
82 };
83
84 &nfc {
85         status = "okay";
86         nand-bus-width = <16>;
87         nand-ecc-mode = "hw";
88         nand-on-flash-bbt;
89
90         partition@0 {
91                 label = "u-boot";
92                 reg = <0x0 0x100000>;
93         };
94
95         partition@100000 {
96                 label = "env";
97                 reg = <0x100000 0x80000>;
98         };
99
100         partition@180000 {
101                 label = "env2";
102                 reg = <0x180000 0x80000>;
103         };
104
105         partition@200000 {
106                 label = "firmware";
107                 reg = <0x200000 0x80000>;
108         };
109
110         partition@280000 {
111                 label = "dtb";
112                 reg = <0x280000 0x80000>;
113         };
114
115         partition@300000 {
116                 label = "kernel";
117                 reg = <0x300000 0x500000>;
118         };
119
120         partition@800000 {
121                 label = "rootfs";
122                 reg = <0x800000 0xf800000>;
123         };
124 };