2 * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
14 #include "imx6qdl-tx6.dtsi"
17 model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
18 compatible = "karo,imx6q-tx6q", "fsl,imx6q";
29 backlight0: backlight0 {
30 compatible = "pwm-backlight";
31 pwms = <&pwm2 0 500000 0>;
33 * a poor man's way to create a 1:1 relationship between
34 * the PWM value and the actual duty cycle
36 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
37 10 11 12 13 14 15 16 17 18 19
38 20 21 22 23 24 25 26 27 28 29
39 30 31 32 33 34 35 36 37 38 39
40 40 41 42 43 44 45 46 47 48 49
41 50 51 52 53 54 55 56 57 58 59
42 60 61 62 63 64 65 66 67 68 69
43 70 71 72 73 74 75 76 77 78 79
44 80 81 82 83 84 85 86 87 88 89
45 90 91 92 93 94 95 96 97 98 99
47 default-brightness-level = <50>;
50 backlight1: backlight1 {
51 compatible = "pwm-backlight";
52 pwms = <&pwm1 0 500000 0>;
54 * a poor man's way to create a 1:1 relationship between
55 * the PWM value and the actual duty cycle
57 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
58 10 11 12 13 14 15 16 17 18 19
59 20 21 22 23 24 25 26 27 28 29
60 30 31 32 33 34 35 36 37 38 39
61 40 41 42 43 44 45 46 47 48 49
62 50 51 52 53 54 55 56 57 58 59
63 60 61 62 63 64 65 66 67 68 69
64 70 71 72 73 74 75 76 77 78 79
65 80 81 82 83 84 85 86 87 88 89
66 90 91 92 93 94 95 96 97 98 99
68 default-brightness-level = <50>;
72 compatible = "fsl,mxc_sdc_fb";
74 interface_pix_fmt = "RGB666";
79 fsl,data-mapping = "spwg";
80 fsl,data-width = <18>;
84 native-mode = <&lvds0_timing0>;
86 lvds0_timing0: hsd100pxn1 {
87 clock-frequency = <65000000>;
99 pixelclk-active = <1>;
103 clock-frequency = <25200000>;
115 pixelclk-active = <0>;
118 lvds0_timing2: nl12880bc20 {
119 clock-frequency = <71000000>;
131 pixelclk-active = <0>;
137 compatible = "fsl,mxc_sdc_fb";
139 interface_pix_fmt = "RGB666";
140 mode_str = "LDB-XGA";
144 fsl,data-mapping = "spwg";
145 fsl,data-width = <18>;
149 native-mode = <&lvds1_timing0>;
151 lvds1_timing0: hsd100pxn1 {
152 clock-frequency = <65000000>;
164 pixelclk-active = <0>;
168 clock-frequency = <25200000>;
180 pixelclk-active = <0>;
183 lvds1_timing2: nl12880bc20 {
184 clock-frequency = <71000000>;
196 pixelclk-active = <0>;
203 polytouch1: eeti@04 {
204 compatible = "eeti,egalax_ts";
206 pinctrl-names = "default";
207 pinctrl-0 = <&pinctrl_eeti>;
208 interrupt-parent = <&gpio3>;
210 wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
217 pinctrl_eeti: eetigrp {
219 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
230 status = "disabled"; /* pads partially clash with backlight1 PWM */