2 * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
4 * Based on omap3-beagle-xm.dts
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include "omap36xx.dtsi"
15 model = "OMAP3 GTA04";
16 compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
25 device_type = "memory";
26 reg = <0x80000000 0x20000000>; /* 512 MB */
34 compatible = "gpio-keys";
39 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
45 compatible = "ti,omap-twl4030";
53 compatible = "simple-audio-card";
54 simple-audio-card,name = "GTA04 voice";
55 simple-audio-card,bitclock-master = <&telephony_link_master>;
56 simple-audio-card,frame-master = <&telephony_link_master>;
57 simple-audio-card,format = "i2s";
58 simple-audio-card,bitclock-inversion;
59 simple-audio-card,frame-inversion;
60 simple-audio-card,cpu {
61 sound-dai = <&mcbsp4>;
64 telephony_link_master: simple-audio-card,codec {
65 sound-dai = <>m601_codec>;
69 gtm601_codec: gsm_codec {
70 compatible = "option,gtm601";
71 #sound-dai-cells = <0>;
75 compatible = "spi-gpio";
76 #address-cells = <0x1>;
78 pinctrl-names = "default";
79 pinctrl-0 = <&spi_gpio_pins>;
81 gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
82 gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
83 gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
84 cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
85 num-chipselects = <1>;
89 compatible = "toppoly,td028ttec1";
91 spi-max-frequency = <100000>;
98 remote-endpoint = <&dpi_out>;
105 compatible = "pwm-backlight";
106 pwms = <&pwm11 0 12000000 0>;
107 pwm-names = "backlight";
108 brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
109 default-brightness-level = <9>; /* => 90 */
110 pinctrl-names = "default";
111 pinctrl-0 = <&backlight_pins>;
115 compatible = "ti,omap-dmtimer-pwm";
116 ti,timers = <&timer11>;
120 hsusb2_phy: hsusb2_phy {
121 compatible = "usb-nop-xceiv";
122 reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
126 compatible = "svideo-connector";
130 tv_connector_in: endpoint {
131 remote-endpoint = <&opa_out>;
137 compatible = "ti,opa362";
138 enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
141 #address-cells = <1>;
147 remote-endpoint = <&venc_out>;
154 remote-endpoint = <&tv_connector_in>;
160 wifi_pwrseq: wifi_pwrseq {
161 compatible = "mmc-pwrseq-simple";
162 reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
167 pinctrl-names = "default";
172 hsusb2_pins: pinmux_hsusb2_pins {
173 pinctrl-single,pins = <
174 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
175 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
176 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
177 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
178 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
179 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
183 uart1_pins: pinmux_uart1_pins {
184 pinctrl-single,pins = <
185 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
186 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
190 uart2_pins: pinmux_uart2_pins {
191 pinctrl-single,pins = <
192 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
193 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
197 uart3_pins: pinmux_uart3_pins {
198 pinctrl-single,pins = <
199 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
200 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
204 mmc1_pins: pinmux_mmc1_pins {
205 pinctrl-single,pins = <
206 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
207 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
208 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
209 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
210 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
211 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
215 backlight_pins: backlight_pins_pimnux {
216 pinctrl-single,pins = <
217 OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */
221 dss_dpi_pins: pinmux_dss_dpi_pins {
222 pinctrl-single,pins = <
223 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
224 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
225 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
226 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
227 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
228 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
229 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
230 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
231 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
232 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
233 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
234 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
235 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
236 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
237 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
238 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
239 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
240 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
241 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
242 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
243 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
244 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
245 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
246 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
247 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
248 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
249 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
250 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
255 pinctrl-single,pins = <
256 OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
260 bma180_pins: pinmux_bma180_pins {
261 pinctrl-single,pins = <
262 OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
266 itg3200_pins: pinmux_itg3200_pins {
267 pinctrl-single,pins = <
268 OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
272 hmc5843_pins: pinmux_hmc5843_pins {
273 pinctrl-single,pins = <
274 OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
280 pinctrl-names = "default";
285 hsusb2_2_pins: pinmux_hsusb2_2_pins {
286 pinctrl-single,pins = <
287 OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
288 OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
289 OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
290 OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
291 OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
292 OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
296 spi_gpio_pins: spi_gpio_pinmux {
297 pinctrl-single,pins = <
298 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
299 OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
300 OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
301 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
307 clock-frequency = <2600000>;
311 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
312 interrupt-parent = <&intc>;
315 compatible = "ti,twl4030-audio";
316 ti,enable-vibra = <1>;
318 ti,ramp_delay_value = <3>;
323 compatible = "ti,twl4030-power";
329 #include "twl4030.dtsi"
330 #include "twl4030_omap3.dtsi"
333 clock-frequency = <400000>;
335 /* pressure sensor */
337 compatible = "bosch,bmp085";
339 interrupt-parent = <&gpio4>;
340 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
345 compatible = "bosch,bma180";
347 pinctrl-names = "default";
348 pintcrl-0 = <&bma180_pins>;
349 interrupt-parent = <&gpio4>;
350 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
355 compatible = "invensense,itg3200";
357 pinctrl-names = "default";
358 pinctrl-0 = <&itg3200_pins>;
359 interrupt-parent = <&gpio2>;
360 interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
364 tca6507: tca6507@45 {
365 compatible = "ti,tca6507";
366 #address-cells = <1>;
373 gta04_led0: red_aux@0 {
374 label = "gta04:red:aux";
378 gta04_led1: green_aux@1 {
379 label = "gta04:green:aux";
383 gta04_led3: red_power@3 {
384 label = "gta04:red:power";
386 linux,default-trigger = "default-on";
389 gta04_led4: green_power@4 {
390 label = "gta04:green:power";
394 wifi_reset: wifi_reset@6 {
400 /* compass aka magnetometer */
402 compatible = "honeywell,hmc5883l";
404 pinctrl-names = "default";
405 pinctrl-0 = <&hmc5843_pins>;
406 interrupt-parent = <&gpio4>;
407 interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */
412 compatible = "ti,tsc2007";
414 interrupt-parent = <&gpio6>;
415 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
416 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
417 ti,x-plate-ohms = <600>;
422 compatible = "atmel,24c64";
428 clock-frequency = <100000>;
432 interface-type = <0>;
433 usb-phy = <&usb2_phy>;
435 phy-names = "usb2-phy";
441 port2-mode = "ehci-phy";
445 phys = <0 &hsusb2_phy>;
449 pinctrl-names = "default";
450 pinctrl-0 = <&mmc1_pins>;
451 vmmc-supply = <&vmmc1>;
457 vmmc-supply = <&vaux4>;
461 mmc-pwrseq = <&wifi_pwrseq>;
473 pinctrl-names = "default";
474 pinctrl-0 = <&uart1_pins>;
478 pinctrl-names = "default";
479 pinctrl-0 = <&uart2_pins>;
483 pinctrl-names = "default";
484 pinctrl-0 = <&uart3_pins>;
488 ti,bb-uvolt = <3200000>;
494 regulator-min-microvolt = <2500000>;
495 regulator-max-microvolt = <3000000>;
500 regulator-min-microvolt = <2800000>;
501 regulator-max-microvolt = <2800000>;
507 regulator-min-microvolt = <2500000>;
508 regulator-max-microvolt = <2500000>;
513 regulator-min-microvolt = <2800000>;
514 regulator-max-microvolt = <3150000>;
519 regulator-min-microvolt = <2800000>;
520 regulator-max-microvolt = <3150000>;
524 pinctrl-names = "default";
525 pinctrl-0 = < &dss_dpi_pins >;
528 vdds_dsi-supply = <&vpll2>;
532 remote-endpoint = <&lcd_in>;
541 vdda-supply = <&vdac>;
545 remote-endpoint = <&opa_in>;
553 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
556 compatible = "ti,omap2-nand";
557 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
558 interrupt-parent = <&gpmc>;
559 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
560 <1 IRQ_TYPE_NONE>; /* termcount */
561 nand-bus-width = <16>;
562 ti,nand-ecc-opt = "bch8";
564 gpmc,sync-clk-ps = <0>;
566 gpmc,cs-rd-off-ns = <44>;
567 gpmc,cs-wr-off-ns = <44>;
568 gpmc,adv-on-ns = <6>;
569 gpmc,adv-rd-off-ns = <34>;
570 gpmc,adv-wr-off-ns = <44>;
571 gpmc,we-off-ns = <40>;
572 gpmc,oe-off-ns = <54>;
573 gpmc,access-ns = <64>;
574 gpmc,rd-cycle-ns = <82>;
575 gpmc,wr-cycle-ns = <82>;
576 gpmc,wr-access-ns = <40>;
577 gpmc,wr-data-mux-bus-ns = <0>;
578 gpmc,device-width = <2>;
580 #address-cells = <1>;
590 reg = <0x80000 0x1e0000>;
593 bootloaders_env@260000 {
594 label = "U-Boot Env";
595 reg = <0x260000 0x20000>;
600 reg = <0x280000 0x400000>;
604 label = "File System";
605 reg = <0x680000 0xf980000>;
615 pinctrl-names = "default";
616 pinctrl-0 = <&hdq_pins>;