arch/arm/boot/dts/qcom-apq8064-ifc6410.dts

   1 #include "qcom-apq8064-v2.0.dtsi"
   2 #include <dt-bindings/gpio/gpio.h>
   3
   4 / {
   5         model = "Qualcomm APQ8064/IFC6410";
   6         compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
   7
   8         aliases {
   9                 serial0 = &gsbi7_serial;
  10                 serial1 = &gsbi6_serial;
  11         };
  12
  13         chosen {
  14                 stdout-path = "serial0:115200n8";
  15         };
  16
  17         soc {
  18                 pinctrl@800000 {
  19                         card_detect: card_detect {
  20                                 mux {
  21                                         pins = "gpio26";
  22                                         function = "gpio";
  23                                         bias-disable;
  24                                 };
  25                         };
  26                 };
  27
  28                 rpm@108000 {
  29                         regulators {
  30                                 vin_lvs1_3_6-supply = <&pm8921_s4>;
  31                                 vin_lvs2-supply = <&pm8921_s1>;
  32                                 vin_lvs4_5_7-supply = <&pm8921_s4>;
  33
  34                                 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
  35                                 vdd_l24-supply = <&pm8921_s1>;
  36                                 vdd_l25-supply = <&pm8921_s1>;
  37                                 vdd_l26-supply = <&pm8921_s7>;
  38                                 vdd_l27-supply = <&pm8921_s7>;
  39                                 vdd_l28-supply = <&pm8921_s7>;
  40
  41
  42                                 /* Buck SMPS */
  43                                 pm8921_s1: s1 {
  44                                         regulator-always-on;
  45                                         regulator-min-microvolt = <1225000>;
  46                                         regulator-max-microvolt = <1225000>;
  47                                         qcom,switch-mode-frequency = <3200000>;
  48                                         bias-pull-down;
  49                                 };
  50
  51                                 pm8921_s3: s3 {
  52                                         regulator-min-microvolt = <1000000>;
  53                                         regulator-max-microvolt = <1400000>;
  54                                         qcom,switch-mode-frequency = <4800000>;
  55                                 };
  56
  57                                 pm8921_s4: s4 {
  58                                         regulator-min-microvolt = <1800000>;
  59                                         regulator-max-microvolt = <1800000>;
  60                                         qcom,switch-mode-frequency = <3200000>;
  61                                 };
  62
  63                                 pm8921_s7: s7 {
  64                                         regulator-min-microvolt = <1300000>;
  65                                         regulator-max-microvolt = <1300000>;
  66                                         qcom,switch-mode-frequency = <3200000>;
  67                                 };
  68
  69                                 pm8921_l3: l3 {
  70                                         regulator-min-microvolt = <3050000>;
  71                                         regulator-max-microvolt = <3300000>;
  72                                         bias-pull-down;
  73                                 };
  74
  75                                 pm8921_l4: l4 {
  76                                         regulator-min-microvolt = <1000000>;
  77                                         regulator-max-microvolt = <1800000>;
  78                                         bias-pull-down;
  79                                 };
  80
  81                                 pm8921_l5: l5 {
  82                                         regulator-min-microvolt = <2750000>;
  83                                         regulator-max-microvolt = <3000000>;
  84                                         bias-pull-down;
  85                                 };
  86
  87                                 pm8921_l6: l6 {
  88                                         regulator-min-microvolt = <2950000>;
  89                                         regulator-max-microvolt = <2950000>;
  90                                         bias-pull-down;
  91                                 };
  92
  93                                 pm8921_l23: l23 {
  94                                         regulator-min-microvolt = <1700000>;
  95                                         regulator-max-microvolt = <1900000>;
  96                                         bias-pull-down;
  97                                 };
  98
  99                                 pm8921_lvs1: lvs1 {
 100                                         bias-pull-down;
 101                                 };
 102                         };
 103                 };
 104
 105                 ext_3p3v: regulator-fixed@1 {
 106                         compatible = "regulator-fixed";
 107                         regulator-min-microvolt = <3300000>;
 108                         regulator-max-microvolt = <3300000>;
 109                         regulator-name = "ext_3p3v";
 110                         regulator-type = "voltage";
 111                         startup-delay-us = <0>;
 112                         gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
 113                         enable-active-high;
 114                         regulator-boot-on;
 115                 };
 116
 117                 gsbi3: gsbi@16200000 {
 118                         status = "okay";
 119                         qcom,mode = <GSBI_PROT_I2C>;
 120                         i2c3: i2c@16280000 {
 121                                 status = "okay";
 122                         };
 123                 };
 124
 125                 gsbi@12440000 {
 126                         status = "okay";
 127                         qcom,mode = <GSBI_PROT_I2C>;
 128
 129                         i2c@12460000 {
 130                                 status = "okay";
 131                                 clock-frequency = <200000>;
 132
 133                                 eeprom: eeprom@52 {
 134                                         compatible = "atmel,24c128";
 135                                         reg = <0x52>;
 136                                         pagesize = <32>;
 137                                 };
 138                         };
 139                 };
 140
 141                 gsbi@16500000 {
 142                         status = "ok";
 143                         qcom,mode = <GSBI_PROT_I2C_UART>;
 144
 145                         serial@16540000 {
 146                                 status = "ok";
 147                                 pinctrl-names = "default";
 148                                 pinctrl-0 = <&uart_pins>;
 149                         };
 150                 };
 151
 152                 gsbi@16600000 {
 153                         status = "ok";
 154                         qcom,mode = <GSBI_PROT_I2C_UART>;
 155                         serial@16640000 {
 156                                 status = "ok";
 157                         };
 158                 };
 159
 160                 sata_phy0: phy@1b400000 {
 161                         status = "okay";
 162                 };
 163
 164                 sata0: sata@29000000 {
 165                         status          = "okay";
 166                         target-supply   = <&pm8921_s4>;
 167                 };
 168
 169                 /* OTG */
 170                 usb1_phy: phy@12500000 {
 171                         status          = "okay";
 172                         vddcx-supply    = <&pm8921_s3>;
 173                         v3p3-supply     = <&pm8921_l3>;
 174                         v1p8-supply     = <&pm8921_l4>;
 175                 };
 176
 177                 usb3_phy: phy@12520000 {
 178                         status          = "okay";
 179                         vddcx-supply    = <&pm8921_s3>;
 180                         v3p3-supply     = <&pm8921_l3>;
 181                         v1p8-supply     = <&pm8921_l23>;
 182                 };
 183
 184                 usb4_phy: phy@12530000 {
 185                         status          = "okay";
 186                         vddcx-supply    = <&pm8921_s3>;
 187                         v3p3-supply     = <&pm8921_l3>;
 188                         v1p8-supply     = <&pm8921_l23>;
 189                 };
 190
 191                 gadget1: gadget@12500000 {
 192                         status = "okay";
 193                 };
 194
 195                 /* OTG */
 196                 usb1: usb@12500000 {
 197                         status = "okay";
 198                 };
 199
 200                 usb3: usb@12520000 {
 201                         status = "okay";
 202                 };
 203
 204                 usb4: usb@12530000 {
 205                         status = "okay";
 206                 };
 207
 208                 amba {
 209                         /* eMMC */
 210                         sdcc1: sdcc@12400000 {
 211                                 status = "okay";
 212                                 vmmc-supply = <&pm8921_l5>;
 213                                 vqmmc-supply = <&pm8921_s4>;
 214                         };
 215
 216                         /* External micro SD card */
 217                         sdcc3: sdcc@12180000 {
 218                                 status = "okay";
 219                                 vmmc-supply = <&pm8921_l6>;
 220                                 pinctrl-names   = "default";
 221                                 pinctrl-0       = <&card_detect>;
 222                                 cd-gpios        = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 223                         };
 224                         /* WLAN */
 225                         sdcc4: sdcc@121c0000 {
 226                                 status = "okay";
 227                                 vmmc-supply = <&ext_3p3v>;
 228                                 vqmmc-supply = <&pm8921_lvs1>;
 229                         };
 230                 };
 231         };
 232 };