arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

   1 /*
   2  * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
   3  * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This file is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License as
  12  *     published by the Free Software Foundation; either version 2 of the
  13  *     License, or (at your option) any later version.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  *     You should have received a copy of the GNU General Public
  21  *     License along with this file; if not, write to the Free
  22  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  23  *     MA 02110-1301 USA
  24  *
  25  * Or, alternatively,
  26  *
  27  *  b) Permission is hereby granted, free of charge, to any person
  28  *     obtaining a copy of this software and associated documentation
  29  *     files (the "Software"), to deal in the Software without
  30  *     restriction, including without limitation the rights to use,
  31  *     copy, modify, merge, publish, distribute, sublicense, and/or
  32  *     sell copies of the Software, and to permit persons to whom the
  33  *     Software is furnished to do so, subject to the following
  34  *     conditions:
  35  *
  36  *     The above copyright notice and this permission notice shall be
  37  *     included in all copies or substantial portions of the Software.
  38  *
  39  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  40  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  41  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  42  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  43  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  44  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  45  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  46  *     OTHER DEALINGS IN THE SOFTWARE.
  47  */
  48
  49 /dts-v1/;
  50 /include/ "sun5i-a13.dtsi"
  51 /include/ "sunxi-common-regulators.dtsi"
  52
  53 / {
  54         model = "Olimex A13-Olinuxino Micro";
  55         compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
  56
  57         soc@01c00000 {
  58                 mmc0: mmc@01c0f000 {
  59                         pinctrl-names = "default";
  60                         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
  61                         vmmc-supply = <&reg_vcc3v3>;
  62                         bus-width = <4>;
  63                         cd-gpios = <&pio 6 0 0>; /* PG0 */
  64                         cd-inverted;
  65                         status = "okay";
  66                 };
  67
  68                 usbphy: phy@01c13400 {
  69                         usb1_vbus-supply = <&reg_usb1_vbus>;
  70                         status = "okay";
  71                 };
  72
  73                 ehci0: usb@01c14000 {
  74                         status = "okay";
  75                 };
  76
  77                 ohci0: usb@01c14400 {
  78                         status = "okay";
  79                 };
  80
  81                 pinctrl@01c20800 {
  82                         mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
  83                                 allwinner,pins = "PG0";
  84                                 allwinner,function = "gpio_in";
  85                                 allwinner,drive = <0>;
  86                                 allwinner,pull = <1>;
  87                         };
  88
  89                         led_pins_olinuxinom: led_pins@0 {
  90                                 allwinner,pins = "PG9";
  91                                 allwinner,function = "gpio_out";
  92                                 allwinner,drive = <1>;
  93                                 allwinner,pull = <0>;
  94                         };
  95
  96                         usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
  97                                 allwinner,pins = "PG11";
  98                                 allwinner,function = "gpio_out";
  99                                 allwinner,drive = <0>;
 100                                 allwinner,pull = <0>;
 101                         };
 102                 };
 103
 104                 uart1: serial@01c28400 {
 105                         pinctrl-names = "default";
 106                         pinctrl-0 = <&uart1_pins_b>;
 107                         status = "okay";
 108                 };
 109
 110                 i2c0: i2c@01c2ac00 {
 111                         pinctrl-names = "default";
 112                         pinctrl-0 = <&i2c0_pins_a>;
 113                         status = "okay";
 114                 };
 115
 116                 i2c1: i2c@01c2b000 {
 117                         pinctrl-names = "default";
 118                         pinctrl-0 = <&i2c1_pins_a>;
 119                         status = "okay";
 120                 };
 121
 122                 i2c2: i2c@01c2b400 {
 123                         pinctrl-names = "default";
 124                         pinctrl-0 = <&i2c2_pins_a>;
 125                         status = "okay";
 126                 };
 127         };
 128
 129         leds {
 130                 compatible = "gpio-leds";
 131                 pinctrl-names = "default";
 132                 pinctrl-0 = <&led_pins_olinuxinom>;
 133
 134                 power {
 135                         label = "a13-olinuxino-micro:green:power";
 136                         gpios = <&pio 6 9 0>;
 137                         default-state = "on";
 138                 };
 139         };
 140
 141         reg_usb1_vbus: usb1-vbus {
 142                 pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
 143                 gpio = <&pio 6 11 0>;
 144                 status = "okay";
 145         };
 146 };