2 * File: arch/blackfin/mach-bf537/boards/stamp.c
3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc.
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
31 #include <linux/device.h>
32 #include <linux/kernel.h>
33 #include <linux/platform_device.h>
34 #include <linux/mtd/mtd.h>
35 #include <linux/mtd/nand.h>
36 #include <linux/mtd/partitions.h>
37 #include <linux/mtd/plat-ram.h>
38 #include <linux/mtd/physmap.h>
39 #include <linux/spi/spi.h>
40 #include <linux/spi/flash.h>
41 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
42 #include <linux/usb/isp1362.h>
44 #include <linux/ata_platform.h>
45 #include <linux/irq.h>
46 #include <linux/interrupt.h>
47 #include <linux/i2c.h>
48 #include <linux/usb/sl811.h>
49 #include <linux/spi/mmc_spi.h>
51 #include <asm/bfin5xx_spi.h>
52 #include <asm/reboot.h>
53 #include <asm/portmux.h>
57 * Name the Board for the /proc/cpuinfo
59 const char bfin_board_name[] = "ADI BF537-STAMP";
62 * Driver needs to know address, irq and flag pin.
65 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
66 #include <linux/usb/isp1760.h>
67 static struct resource bfin_isp1760_resources[] = {
70 .end = 0x203C0000 + 0x000fffff,
71 .flags = IORESOURCE_MEM,
76 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
80 static struct isp1760_platform_data isp1760_priv = {
85 .dack_polarity_high = 0,
86 .dreq_polarity_high = 0,
89 static struct platform_device bfin_isp1760_device = {
90 .name = "isp1760-hcd",
93 .platform_data = &isp1760_priv,
95 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
96 .resource = bfin_isp1760_resources,
100 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
101 #include <linux/input.h>
102 #include <linux/gpio_keys.h>
104 static struct gpio_keys_button bfin_gpio_keys_table[] = {
105 {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
106 {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
107 {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
108 {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
111 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
112 .buttons = bfin_gpio_keys_table,
113 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
116 static struct platform_device bfin_device_gpiokeys = {
119 .platform_data = &bfin_gpio_keys_data,
124 static struct resource bfin_gpios_resources = {
126 .end = MAX_BLACKFIN_GPIOS - 1,
127 .flags = IORESOURCE_IRQ,
130 static struct platform_device bfin_gpios_device = {
131 .name = "simple-gpio",
134 .resource = &bfin_gpios_resources,
137 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
138 static struct resource bfin_pcmcia_cf_resources[] = {
140 .start = 0x20310000, /* IO PORT */
142 .flags = IORESOURCE_MEM,
144 .start = 0x20311000, /* Attribute Memory */
146 .flags = IORESOURCE_MEM,
150 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
152 .start = 6, /* Card Detect PF6 */
154 .flags = IORESOURCE_IRQ,
158 static struct platform_device bfin_pcmcia_cf_device = {
159 .name = "bfin_cf_pcmcia",
161 .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
162 .resource = bfin_pcmcia_cf_resources,
166 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
167 static struct platform_device rtc_device = {
173 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
174 static struct resource smc91x_resources[] = {
176 .name = "smc91x-regs",
178 .end = 0x20300300 + 16,
179 .flags = IORESOURCE_MEM,
184 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
187 static struct platform_device smc91x_device = {
190 .num_resources = ARRAY_SIZE(smc91x_resources),
191 .resource = smc91x_resources,
195 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
196 static struct resource dm9000_resources[] = {
199 .end = 0x203FB800 + 8,
200 .flags = IORESOURCE_MEM,
205 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
209 static struct platform_device dm9000_device = {
212 .num_resources = ARRAY_SIZE(dm9000_resources),
213 .resource = dm9000_resources,
217 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
218 static struct resource ax88180_resources[] = {
221 .end = 0x20300000 + 0x8000,
222 .flags = IORESOURCE_MEM,
227 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
231 static struct platform_device ax88180_device = {
234 .num_resources = ARRAY_SIZE(ax88180_resources),
235 .resource = ax88180_resources,
239 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
240 static struct resource sl811_hcd_resources[] = {
244 .flags = IORESOURCE_MEM,
248 .flags = IORESOURCE_MEM,
250 .start = CONFIG_USB_SL811_BFIN_IRQ,
251 .end = CONFIG_USB_SL811_BFIN_IRQ,
252 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
256 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
257 void sl811_port_power(struct device *dev, int is_on)
259 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
260 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
264 static struct sl811_platform_data sl811_priv = {
266 .power = 250, /* == 500mA */
267 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
268 .port_power = &sl811_port_power,
272 static struct platform_device sl811_hcd_device = {
276 .platform_data = &sl811_priv,
278 .num_resources = ARRAY_SIZE(sl811_hcd_resources),
279 .resource = sl811_hcd_resources,
283 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
284 static struct resource isp1362_hcd_resources[] = {
288 .flags = IORESOURCE_MEM,
292 .flags = IORESOURCE_MEM,
294 .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
295 .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
296 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
300 static struct isp1362_platform_data isp1362_priv = {
305 .int_edge_triggered = 0,
306 .remote_wakeup_connected = 0,
307 .no_power_switching = 1,
308 .power_switching_mode = 0,
311 static struct platform_device isp1362_hcd_device = {
312 .name = "isp1362-hcd",
315 .platform_data = &isp1362_priv,
317 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
318 .resource = isp1362_hcd_resources,
322 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
323 static struct platform_device bfin_mii_bus = {
324 .name = "bfin_mii_bus",
327 static struct platform_device bfin_mac_device = {
329 .dev.platform_data = &bfin_mii_bus,
333 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
334 static struct resource net2272_bfin_resources[] = {
337 .end = 0x20300000 + 0x100,
338 .flags = IORESOURCE_MEM,
342 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
346 static struct platform_device net2272_bfin_device = {
349 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
350 .resource = net2272_bfin_resources,
354 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
355 #ifdef CONFIG_MTD_PARTITIONS
356 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
358 static struct mtd_partition bfin_plat_nand_partitions[] = {
360 .name = "linux kernel(nand)",
364 .name = "file system(nand)",
365 .size = MTDPART_SIZ_FULL,
366 .offset = MTDPART_OFS_APPEND,
371 #define BFIN_NAND_PLAT_CLE 2
372 #define BFIN_NAND_PLAT_ALE 1
373 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
375 struct nand_chip *this = mtd->priv;
377 if (cmd == NAND_CMD_NONE)
381 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
383 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
386 #define BFIN_NAND_PLAT_READY GPIO_PF3
387 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
389 return gpio_get_value(BFIN_NAND_PLAT_READY);
392 static struct platform_nand_data bfin_plat_nand_data = {
395 #ifdef CONFIG_MTD_PARTITIONS
396 .part_probe_types = part_probes,
397 .partitions = bfin_plat_nand_partitions,
398 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
402 .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
403 .dev_ready = bfin_plat_nand_dev_ready,
407 #define MAX(x, y) (x > y ? x : y)
408 static struct resource bfin_plat_nand_resources = {
410 .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
411 .flags = IORESOURCE_IO,
414 static struct platform_device bfin_async_nand_device = {
418 .resource = &bfin_plat_nand_resources,
420 .platform_data = &bfin_plat_nand_data,
424 static void bfin_plat_nand_init(void)
426 gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
429 static void bfin_plat_nand_init(void) {}
432 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
433 static struct mtd_partition stamp_partitions[] = {
435 .name = "bootloader(nor)",
439 .name = "linux kernel(nor)",
441 .offset = MTDPART_OFS_APPEND,
443 .name = "file system(nor)",
444 .size = 0x400000 - 0x40000 - 0x180000 - 0x10000,
445 .offset = MTDPART_OFS_APPEND,
447 .name = "MAC Address(nor)",
448 .size = MTDPART_SIZ_FULL,
450 .mask_flags = MTD_WRITEABLE,
454 static struct physmap_flash_data stamp_flash_data = {
456 .parts = stamp_partitions,
457 .nr_parts = ARRAY_SIZE(stamp_partitions),
460 static struct resource stamp_flash_resource = {
463 .flags = IORESOURCE_MEM,
466 static struct platform_device stamp_flash_device = {
467 .name = "physmap-flash",
470 .platform_data = &stamp_flash_data,
473 .resource = &stamp_flash_resource,
477 #if defined(CONFIG_MTD_M25P80) \
478 || defined(CONFIG_MTD_M25P80_MODULE)
479 static struct mtd_partition bfin_spi_flash_partitions[] = {
481 .name = "bootloader(spi)",
484 .mask_flags = MTD_CAP_ROM
486 .name = "linux kernel(spi)",
488 .offset = MTDPART_OFS_APPEND,
490 .name = "file system(spi)",
491 .size = MTDPART_SIZ_FULL,
492 .offset = MTDPART_OFS_APPEND,
496 static struct flash_platform_data bfin_spi_flash_data = {
498 .parts = bfin_spi_flash_partitions,
499 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
500 /* .type = "m25p64", */
503 /* SPI flash chip (m25p64) */
504 static struct bfin5xx_spi_chip spi_flash_chip_info = {
505 .enable_dma = 0, /* use dma transfer with this chip*/
510 #if defined(CONFIG_BFIN_SPI_ADC) \
511 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
513 static struct bfin5xx_spi_chip spi_adc_chip_info = {
514 .enable_dma = 1, /* use dma transfer with this chip*/
519 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
520 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
521 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
527 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
528 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
534 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
535 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
537 static int bfin_mmc_spi_init(struct device *dev,
538 irqreturn_t (*detect_int)(int, void *), void *data)
540 return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
541 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
544 static void bfin_mmc_spi_exit(struct device *dev, void *data)
546 free_irq(MMC_SPI_CARD_DETECT_INT, data);
549 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
550 .init = bfin_mmc_spi_init,
551 .exit = bfin_mmc_spi_exit,
552 .detect_delay = 100, /* msecs */
555 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
561 #if defined(CONFIG_PBX)
562 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
563 .ctl_reg = 0x4, /* send zero */
566 .cs_change_per_word = 1,
570 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
571 #include <linux/spi/ad7877.h>
572 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
577 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
579 .vref_delay_usecs = 50, /* internal, no capacitor */
582 .pressure_max = 1000,
584 .stopacq_polarity = 1,
585 .first_conversion_delay = 3,
586 .acquisition_time = 1,
588 .pen_down_acc_interval = 1,
592 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
593 #include <linux/spi/ad7879.h>
594 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
595 .model = 7879, /* Model = AD7879 */
596 .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
597 .pressure_max = 10000,
599 .first_conversion_delay = 3, /* wait 512us before do a first conversion */
600 .acquisition_time = 1, /* 4us acquisition time per sample */
601 .median = 2, /* do 8 measurements */
602 .averaging = 1, /* take the average of 4 middle samples */
603 .pen_down_acc_interval = 255, /* 9.4 ms */
604 .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */
605 .gpio_default = 1, /* During initialization set GPIO = HIGH */
609 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
610 #include <linux/input.h>
611 #include <linux/spi/adxl34x.h>
612 static const struct adxl34x_platform_data adxl34x_info = {
616 .tap_threshold = 0x31,
617 .tap_duration = 0x10,
620 .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
621 .act_axis_control = 0xFF,
622 .activity_threshold = 5,
623 .inactivity_threshold = 3,
624 .inactivity_time = 4,
625 .free_fall_threshold = 0x7,
626 .free_fall_time = 0x20,
628 .data_range = ADXL_FULL_RES,
631 .ev_code_x = ABS_X, /* EV_REL */
632 .ev_code_y = ABS_Y, /* EV_REL */
633 .ev_code_z = ABS_Z, /* EV_REL */
635 .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */
636 .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */
637 .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */
639 /* .ev_code_ff = KEY_F,*/ /* EV_KEY */
640 /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
641 .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
642 .fifo_mode = ADXL_FIFO_STREAM,
646 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
647 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
653 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
654 static struct bfin5xx_spi_chip spidev_chip_info = {
660 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
661 static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
667 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
668 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
671 .cs_gpio = GPIO_PF10,
675 #if defined(CONFIG_MTD_DATAFLASH) \
676 || defined(CONFIG_MTD_DATAFLASH_MODULE)
678 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
680 .name = "bootloader(spi)",
683 .mask_flags = MTD_CAP_ROM
685 .name = "linux kernel(spi)",
687 .offset = MTDPART_OFS_APPEND,
689 .name = "file system(spi)",
690 .size = MTDPART_SIZ_FULL,
691 .offset = MTDPART_OFS_APPEND,
695 static struct flash_platform_data bfin_spi_dataflash_data = {
696 .name = "SPI Dataflash",
697 .parts = bfin_spi_dataflash_partitions,
698 .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
702 static struct bfin5xx_spi_chip data_flash_chip_info = {
703 .enable_dma = 0, /* use dma transfer with this chip*/
708 static struct spi_board_info bfin_spi_board_info[] __initdata = {
709 #if defined(CONFIG_MTD_M25P80) \
710 || defined(CONFIG_MTD_M25P80_MODULE)
712 /* the modalias must be the same as spi device driver name */
713 .modalias = "m25p80", /* Name of spi_driver for this device */
714 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
715 .bus_num = 0, /* Framework bus number */
716 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
717 .platform_data = &bfin_spi_flash_data,
718 .controller_data = &spi_flash_chip_info,
722 #if defined(CONFIG_MTD_DATAFLASH) \
723 || defined(CONFIG_MTD_DATAFLASH_MODULE)
724 { /* DataFlash chip */
725 .modalias = "mtd_dataflash",
726 .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
727 .bus_num = 0, /* Framework bus number */
728 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
729 .platform_data = &bfin_spi_dataflash_data,
730 .controller_data = &data_flash_chip_info,
734 #if defined(CONFIG_BFIN_SPI_ADC) \
735 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
737 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
738 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
739 .bus_num = 0, /* Framework bus number */
740 .chip_select = 1, /* Framework chip select. */
741 .platform_data = NULL, /* No spi_driver specific config */
742 .controller_data = &spi_adc_chip_info,
746 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
747 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
749 .modalias = "ad1836-spi",
750 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
752 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
753 .controller_data = &ad1836_spi_chip_info,
756 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
758 .modalias = "ad9960-spi",
759 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
762 .controller_data = &ad9960_spi_chip_info,
765 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
767 .modalias = "mmc_spi",
768 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
771 .platform_data = &bfin_mmc_spi_pdata,
772 .controller_data = &mmc_spi_chip_info,
776 #if defined(CONFIG_PBX)
778 .modalias = "fxs-spi",
779 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
781 .chip_select = 8 - CONFIG_J11_JUMPER,
782 .controller_data = &spi_si3xxx_chip_info,
786 .modalias = "fxo-spi",
787 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
789 .chip_select = 8 - CONFIG_J19_JUMPER,
790 .controller_data = &spi_si3xxx_chip_info,
794 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
796 .modalias = "ad7877",
797 .platform_data = &bfin_ad7877_ts_info,
799 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
802 .controller_data = &spi_ad7877_chip_info,
805 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
807 .modalias = "ad7879",
808 .platform_data = &bfin_ad7879_ts_info,
810 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
813 .controller_data = &spi_ad7879_chip_info,
814 .mode = SPI_CPHA | SPI_CPOL,
817 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
819 .modalias = "spidev",
820 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
823 .controller_data = &spidev_chip_info,
826 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
828 .modalias = "bfin-lq035q1-spi",
829 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
832 .controller_data = &lq035q1_spi_chip_info,
833 .mode = SPI_CPHA | SPI_CPOL,
836 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
838 .modalias = "enc28j60",
839 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
842 .chip_select = 0, /* GPIO controlled SSEL */
843 .controller_data = &enc28j60_spi_chip_info,
849 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
850 /* SPI controller data */
851 static struct bfin5xx_spi_master bfin_spi0_info = {
853 .enable_dma = 1, /* master has the ability to do dma transfer */
854 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
858 static struct resource bfin_spi0_resource[] = {
860 .start = SPI0_REGBASE,
861 .end = SPI0_REGBASE + 0xFF,
862 .flags = IORESOURCE_MEM,
867 .flags = IORESOURCE_IRQ,
871 static struct platform_device bfin_spi0_device = {
873 .id = 0, /* Bus number */
874 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
875 .resource = bfin_spi0_resource,
877 .platform_data = &bfin_spi0_info, /* Passed to driver */
880 #endif /* spi master and devices */
882 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
884 /* SPORT SPI controller data */
885 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
886 .num_chipselect = 1, /* master only supports one device */
887 .enable_dma = 0, /* master don't support DMA */
888 .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
889 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
892 static struct resource bfin_sport_spi0_resource[] = {
894 .start = SPORT0_TCR1,
895 .end = SPORT0_TCR1 + 0xFF,
896 .flags = IORESOURCE_MEM,
899 .start = IRQ_SPORT0_ERROR,
900 .end = IRQ_SPORT0_ERROR,
901 .flags = IORESOURCE_IRQ,
905 static struct platform_device bfin_sport_spi0_device = {
906 .name = "bfin-sport-spi",
907 .id = 1, /* Bus number */
908 .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
909 .resource = bfin_sport_spi0_resource,
911 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
915 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
916 .num_chipselect = 1, /* master only supports one device */
917 .enable_dma = 0, /* master don't support DMA */
918 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
919 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
922 static struct resource bfin_sport_spi1_resource[] = {
924 .start = SPORT1_TCR1,
925 .end = SPORT1_TCR1 + 0xFF,
926 .flags = IORESOURCE_MEM,
929 .start = IRQ_SPORT1_ERROR,
930 .end = IRQ_SPORT1_ERROR,
931 .flags = IORESOURCE_IRQ,
935 static struct platform_device bfin_sport_spi1_device = {
936 .name = "bfin-sport-spi",
937 .id = 2, /* Bus number */
938 .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
939 .resource = bfin_sport_spi1_resource,
941 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
945 #endif /* sport spi master and devices */
947 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
948 static struct platform_device bfin_fb_device = {
949 .name = "bf537-lq035",
953 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
954 static struct platform_device bfin_fb_adv7393_device = {
955 .name = "bfin-adv7393",
959 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
960 #include <asm/bfin-lq035q1.h>
962 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
963 .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
964 .use_bl = 0, /* let something else control the LCD Blacklight */
968 static struct resource bfin_lq035q1_resources[] = {
970 .start = IRQ_PPI_ERROR,
971 .end = IRQ_PPI_ERROR,
972 .flags = IORESOURCE_IRQ,
976 static struct platform_device bfin_lq035q1_device = {
977 .name = "bfin-lq035q1",
979 .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
980 .resource = bfin_lq035q1_resources,
982 .platform_data = &bfin_lq035q1_data,
987 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
988 static struct resource bfin_uart_resources[] = {
989 #ifdef CONFIG_SERIAL_BFIN_UART0
993 .flags = IORESOURCE_MEM,
996 #ifdef CONFIG_SERIAL_BFIN_UART1
1000 .flags = IORESOURCE_MEM,
1005 static struct platform_device bfin_uart_device = {
1006 .name = "bfin-uart",
1008 .num_resources = ARRAY_SIZE(bfin_uart_resources),
1009 .resource = bfin_uart_resources,
1013 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1014 #ifdef CONFIG_BFIN_SIR0
1015 static struct resource bfin_sir0_resources[] = {
1017 .start = 0xFFC00400,
1019 .flags = IORESOURCE_MEM,
1022 .start = IRQ_UART0_RX,
1023 .end = IRQ_UART0_RX+1,
1024 .flags = IORESOURCE_IRQ,
1027 .start = CH_UART0_RX,
1028 .end = CH_UART0_RX+1,
1029 .flags = IORESOURCE_DMA,
1033 static struct platform_device bfin_sir0_device = {
1036 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1037 .resource = bfin_sir0_resources,
1040 #ifdef CONFIG_BFIN_SIR1
1041 static struct resource bfin_sir1_resources[] = {
1043 .start = 0xFFC02000,
1045 .flags = IORESOURCE_MEM,
1048 .start = IRQ_UART1_RX,
1049 .end = IRQ_UART1_RX+1,
1050 .flags = IORESOURCE_IRQ,
1053 .start = CH_UART1_RX,
1054 .end = CH_UART1_RX+1,
1055 .flags = IORESOURCE_DMA,
1059 static struct platform_device bfin_sir1_device = {
1062 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1063 .resource = bfin_sir1_resources,
1068 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1069 static struct resource bfin_twi0_resource[] = {
1071 .start = TWI0_REGBASE,
1072 .end = TWI0_REGBASE,
1073 .flags = IORESOURCE_MEM,
1078 .flags = IORESOURCE_IRQ,
1082 static struct platform_device i2c_bfin_twi_device = {
1083 .name = "i2c-bfin-twi",
1085 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1086 .resource = bfin_twi0_resource,
1090 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1091 #include <linux/input.h>
1092 #include <linux/i2c/adp5588_keys.h>
1093 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1107 [13] = KEY_BACKSLASH,
1119 [26] = KEY_LEFTBRACE,
1120 [27] = KEY_RIGHTBRACE,
1133 [41] = KEY_SEMICOLON,
1134 [42] = KEY_APOSTROPHE,
1135 [43] = KEY_BACKSLASH,
1155 [65] = KEY_BACKSPACE,
1168 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1171 .keymap = adp5588_keymap,
1172 .keymapsize = ARRAY_SIZE(adp5588_keymap),
1177 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1178 #include <linux/mfd/adp5520.h>
1181 * ADP5520/5501 Backlight Data
1184 static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
1185 .fade_in = FADE_T_1200ms,
1186 .fade_out = FADE_T_1200ms,
1187 .fade_led_law = BL_LAW_LINEAR,
1189 .abml_filt = BL_AMBL_FILT_640ms,
1190 .l1_daylight_max = BL_CUR_mA(15),
1191 .l1_daylight_dim = BL_CUR_mA(0),
1192 .l2_office_max = BL_CUR_mA(7),
1193 .l2_office_dim = BL_CUR_mA(0),
1194 .l3_dark_max = BL_CUR_mA(3),
1195 .l3_dark_dim = BL_CUR_mA(0),
1196 .l2_trip = L2_COMP_CURR_uA(700),
1197 .l2_hyst = L2_COMP_CURR_uA(50),
1198 .l3_trip = L3_COMP_CURR_uA(80),
1199 .l3_hyst = L3_COMP_CURR_uA(20),
1203 * ADP5520/5501 LEDs Data
1206 #include <linux/leds.h>
1208 static struct led_info adp5520_leds[] = {
1210 .name = "adp5520-led1",
1211 .default_trigger = "none",
1212 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
1214 #ifdef ADP5520_EN_ALL_LEDS
1216 .name = "adp5520-led2",
1217 .default_trigger = "none",
1218 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1221 .name = "adp5520-led3",
1222 .default_trigger = "none",
1223 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1228 static struct adp5520_leds_platfrom_data adp5520_leds_data = {
1229 .num_leds = ARRAY_SIZE(adp5520_leds),
1230 .leds = adp5520_leds,
1231 .fade_in = FADE_T_600ms,
1232 .fade_out = FADE_T_600ms,
1233 .led_on_time = LED_ONT_600ms,
1240 static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
1242 .gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
1243 .gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
1247 * ADP5520 Keypad Data
1250 #include <linux/input.h>
1251 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1252 [KEY(0, 0)] = KEY_GRAVE,
1253 [KEY(0, 1)] = KEY_1,
1254 [KEY(0, 2)] = KEY_2,
1255 [KEY(0, 3)] = KEY_3,
1256 [KEY(1, 0)] = KEY_4,
1257 [KEY(1, 1)] = KEY_5,
1258 [KEY(1, 2)] = KEY_6,
1259 [KEY(1, 3)] = KEY_7,
1260 [KEY(2, 0)] = KEY_8,
1261 [KEY(2, 1)] = KEY_9,
1262 [KEY(2, 2)] = KEY_0,
1263 [KEY(2, 3)] = KEY_MINUS,
1264 [KEY(3, 0)] = KEY_EQUAL,
1265 [KEY(3, 1)] = KEY_BACKSLASH,
1266 [KEY(3, 2)] = KEY_BACKSPACE,
1267 [KEY(3, 3)] = KEY_ENTER,
1270 static struct adp5520_keys_platfrom_data adp5520_keys_data = {
1271 .rows_en_mask = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
1272 .cols_en_mask = COL_C3 | COL_C2 | COL_C1 | COL_C0,
1273 .keymap = adp5520_keymap,
1274 .keymapsize = ARRAY_SIZE(adp5520_keymap),
1279 * ADP5520/5501 Multifuction Device Init Data
1282 static struct adp5520_subdev_info adp5520_subdevs[] = {
1284 .name = "adp5520-backlight",
1286 .platform_data = &adp5520_backlight_data,
1289 .name = "adp5520-led",
1291 .platform_data = &adp5520_leds_data,
1294 .name = "adp5520-gpio",
1296 .platform_data = &adp5520_gpio_data,
1299 .name = "adp5520-keys",
1301 .platform_data = &adp5520_keys_data,
1305 static struct adp5520_platform_data adp5520_pdev_data = {
1306 .num_subdevs = ARRAY_SIZE(adp5520_subdevs),
1307 .subdevs = adp5520_subdevs,
1312 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
1313 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
1315 I2C_BOARD_INFO("ad7142_joystick", 0x2C),
1319 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
1321 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1324 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
1326 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1330 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
1332 I2C_BOARD_INFO("ad7879", 0x2F),
1334 .platform_data = (void *)&bfin_ad7879_ts_info,
1337 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1339 I2C_BOARD_INFO("adp5588-keys", 0x34),
1341 .platform_data = (void *)&adp5588_kpad_data,
1344 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1346 I2C_BOARD_INFO("pmic-adp5520", 0x32),
1348 .platform_data = (void *)&adp5520_pdev_data,
1351 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1353 I2C_BOARD_INFO("adxl34x", 0x53),
1355 .platform_data = (void *)&adxl34x_info,
1360 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1361 static struct platform_device bfin_sport0_uart_device = {
1362 .name = "bfin-sport-uart",
1366 static struct platform_device bfin_sport1_uart_device = {
1367 .name = "bfin-sport-uart",
1372 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1373 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
1374 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
1376 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
1377 #define PATA_INT IRQ_PF5
1378 static struct pata_platform_info bfin_pata_platform_data = {
1380 .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
1383 static struct resource bfin_pata_resources[] = {
1385 .start = 0x20314020,
1387 .flags = IORESOURCE_MEM,
1390 .start = 0x2031401C,
1392 .flags = IORESOURCE_MEM,
1397 .flags = IORESOURCE_IRQ,
1400 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
1401 static struct pata_platform_info bfin_pata_platform_data = {
1404 /* CompactFlash Storage Card Memory Mapped Adressing
1407 static struct resource bfin_pata_resources[] = {
1409 .start = 0x20211800,
1411 .flags = IORESOURCE_MEM,
1414 .start = 0x2021180E, /* Device Ctl */
1416 .flags = IORESOURCE_MEM,
1421 static struct platform_device bfin_pata_device = {
1422 .name = "pata_platform",
1424 .num_resources = ARRAY_SIZE(bfin_pata_resources),
1425 .resource = bfin_pata_resources,
1427 .platform_data = &bfin_pata_platform_data,
1432 static const unsigned int cclk_vlev_datasheet[] =
1434 VRPAIR(VLEV_085, 250000000),
1435 VRPAIR(VLEV_090, 376000000),
1436 VRPAIR(VLEV_095, 426000000),
1437 VRPAIR(VLEV_100, 426000000),
1438 VRPAIR(VLEV_105, 476000000),
1439 VRPAIR(VLEV_110, 476000000),
1440 VRPAIR(VLEV_115, 476000000),
1441 VRPAIR(VLEV_120, 500000000),
1442 VRPAIR(VLEV_125, 533000000),
1443 VRPAIR(VLEV_130, 600000000),
1446 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1447 .tuple_tab = cclk_vlev_datasheet,
1448 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1449 .vr_settling_time = 25 /* us */,
1452 static struct platform_device bfin_dpmc = {
1453 .name = "bfin dpmc",
1455 .platform_data = &bfin_dmpc_vreg_data,
1459 static struct platform_device *stamp_devices[] __initdata = {
1463 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1464 &bfin_pcmcia_cf_device,
1467 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1471 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
1475 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
1476 &isp1362_hcd_device,
1479 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1480 &bfin_isp1760_device,
1483 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1487 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1491 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
1495 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1500 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1501 &net2272_bfin_device,
1504 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1508 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1509 &bfin_sport_spi0_device,
1510 &bfin_sport_spi1_device,
1513 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1517 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1518 &bfin_lq035q1_device,
1521 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
1522 &bfin_fb_adv7393_device,
1525 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1529 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1530 #ifdef CONFIG_BFIN_SIR0
1533 #ifdef CONFIG_BFIN_SIR1
1538 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1539 &i2c_bfin_twi_device,
1542 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1543 &bfin_sport0_uart_device,
1544 &bfin_sport1_uart_device,
1547 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1551 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1552 &bfin_device_gpiokeys,
1557 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
1558 &bfin_async_nand_device,
1561 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1562 &stamp_flash_device,
1566 static int __init stamp_init(void)
1568 printk(KERN_INFO "%s(): registering device resources\n", __func__);
1569 i2c_register_board_info(0, bfin_i2c_board_info,
1570 ARRAY_SIZE(bfin_i2c_board_info));
1571 bfin_plat_nand_init();
1572 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1573 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1575 #if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
1576 && defined(PATA_INT)
1577 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
1583 arch_initcall(stamp_init);
1585 void native_machine_restart(char *cmd)
1587 /* workaround reboot hang when booting from SPI */
1588 if ((bfin_read_SYSCR() & 0x7) == 0x3)
1589 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1593 * Currently the MAC address is saved in Flash by U-Boot
1595 #define FLASH_MAC 0x203f0000
1596 void bfin_get_ether_addr(char *addr)
1598 *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
1599 *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
1601 EXPORT_SYMBOL(bfin_get_ether_addr);