2 * a4m072 board Device Tree Source
4 * Copyright (C) 2011 DENX Software Engineering GmbH
5 * Heiko Schocher <hs@denx.de>
7 * Copyright (C) 2007 Semihalf
8 * Marian Balakowicz <m8@semihalf.com>
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
16 /include/ "mpc5200b.dtsi"
19 model = "anonymous,a4m072";
20 compatible = "anonymous,a4m072";
25 compatible = "fsl,mpc5200b-immr";
26 ranges = <0 0xf0000000 0x0000c000>;
27 reg = <0xf0000000 0x00000100>;
28 bus-frequency = <0>; /* From boot loader */
29 system-frequency = <0>; /* From boot loader */
32 fsl,init-ext-48mhz-en = <0x0>;
33 fsl,init-fd-enable = <0x01>;
34 fsl,init-fd-counters = <0x3333>;
41 gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
42 compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
47 gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
48 compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
53 gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
54 compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
64 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
70 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
76 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
90 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
100 phy0: ethernet-phy@1f {
102 interrupts = <1 2 0>; /* IRQ 2 active low */
112 compatible = "nsc,lm87";
116 compatible = "nxp,rtc8564";
123 compatible = "fsl,mpc5200b-lpb","simple-bus";
124 #address-cells = <2>;
126 ranges = <0 0 0xfe000000 0x02000000
127 1 0 0x62000000 0x00400000
128 2 0 0x64000000 0x00200000
129 3 0 0x66000000 0x01000000
130 6 0 0x68000000 0x01000000
131 7 0 0x6a000000 0x00000004>;
134 compatible = "cfi-flash";
135 reg = <0 0 0x02000000>;
138 #address-cells = <1>;
141 compatible = "mtd-ram";
142 reg = <1 0x00000 0x00400000>;
148 #interrupt-cells = <1>;
150 #address-cells = <3>;
152 compatible = "fsl,mpc5200-pci";
153 reg = <0xf0000d00 0x100>;
154 interrupt-map-mask = <0xf800 0 0 7>;
157 0xc000 0 0 1 &mpc5200_pic 1 3 3
158 0xc000 0 0 2 &mpc5200_pic 1 3 3
159 0xc000 0 0 3 &mpc5200_pic 1 3 3
160 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
161 clock-frequency = <0>; /* From boot loader */
162 interrupts = <2 8 0 2 9 0 2 10 0>;
164 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
165 0x02000000 0 0x90000000 0x90000000 0 0x10000000
166 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;