arch/powerpc/boot/dts/p3041ds.dts

   1 /*
   2  * P3041DS Device Tree Source
   3  *
   4  * Copyright 2010-2011 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "fsl/p3041si-pre.dtsi"
  36
  37 / {
  38         model = "fsl,P3041DS";
  39         compatible = "fsl,P3041DS";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         memory {
  45                 device_type = "memory";
  46         };
  47
  48         dcsr: dcsr@f00000000 {
  49                 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
  50         };
  51
  52         soc: soc@ffe000000 {
  53                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  54                 reg = <0xf 0xfe000000 0 0x00001000>;
  55                 spi@110000 {
  56                         flash@0 {
  57                                 #address-cells = <1>;
  58                                 #size-cells = <1>;
  59                                 compatible = "spansion,s25sl12801";
  60                                 reg = <0>;
  61                                 spi-max-frequency = <35000000>; /* input clock */
  62                                 partition@u-boot {
  63                                         label = "u-boot";
  64                                         reg = <0x00000000 0x00100000>;
  65                                         read-only;
  66                                 };
  67                                 partition@kernel {
  68                                         label = "kernel";
  69                                         reg = <0x00100000 0x00500000>;
  70                                         read-only;
  71                                 };
  72                                 partition@dtb {
  73                                         label = "dtb";
  74                                         reg = <0x00600000 0x00100000>;
  75                                         read-only;
  76                                 };
  77                                 partition@fs {
  78                                         label = "file system";
  79                                         reg = <0x00700000 0x00900000>;
  80                                 };
  81                         };
  82                 };
  83
  84                 i2c@118100 {
  85                         eeprom@51 {
  86                                 compatible = "at24,24c256";
  87                                 reg = <0x51>;
  88                         };
  89                         eeprom@52 {
  90                                 compatible = "at24,24c256";
  91                                 reg = <0x52>;
  92                         };
  93                 };
  94
  95                 i2c@119100 {
  96                         rtc@68 {
  97                                 compatible = "dallas,ds3232";
  98                                 reg = <0x68>;
  99                                 interrupts = <0x1 0x1 0 0>;
 100                         };
 101                 };
 102         };
 103
 104         rio: rapidio@ffe0c0000 {
 105                 reg = <0xf 0xfe0c0000 0 0x11000>;
 106
 107                 port1 {
 108                         ranges = <0 0 0xc 0x20000000 0 0x10000000>;
 109                 };
 110                 port2 {
 111                         ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 112                 };
 113         };
 114
 115         lbc: localbus@ffe124000 {
 116                 reg = <0xf 0xfe124000 0 0x1000>;
 117                 ranges = <0 0 0xf 0xe8000000 0x08000000
 118                           2 0 0xf 0xffa00000 0x00040000
 119                           3 0 0xf 0xffdf0000 0x00008000>;
 120
 121                 flash@0,0 {
 122                         compatible = "cfi-flash";
 123                         reg = <0 0 0x08000000>;
 124                         bank-width = <2>;
 125                         device-width = <2>;
 126                 };
 127
 128                 nand@2,0 {
 129                         #address-cells = <1>;
 130                         #size-cells = <1>;
 131                         compatible = "fsl,elbc-fcm-nand";
 132                         reg = <0x2 0x0 0x40000>;
 133
 134                         partition@0 {
 135                                 label = "NAND U-Boot Image";
 136                                 reg = <0x0 0x02000000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@2000000 {
 141                                 label = "NAND Root File System";
 142                                 reg = <0x02000000 0x10000000>;
 143                         };
 144
 145                         partition@12000000 {
 146                                 label = "NAND Compressed RFS Image";
 147                                 reg = <0x12000000 0x08000000>;
 148                         };
 149
 150                         partition@1a000000 {
 151                                 label = "NAND Linux Kernel Image";
 152                                 reg = <0x1a000000 0x04000000>;
 153                         };
 154
 155                         partition@1e000000 {
 156                                 label = "NAND DTB Image";
 157                                 reg = <0x1e000000 0x01000000>;
 158                         };
 159
 160                         partition@1f000000 {
 161                                 label = "NAND Writable User area";
 162                                 reg = <0x1f000000 0x21000000>;
 163                         };
 164                 };
 165
 166                 board-control@3,0 {
 167                         compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
 168                         reg = <3 0 0x30>;
 169                 };
 170         };
 171
 172         pci0: pcie@ffe200000 {
 173                 reg = <0xf 0xfe200000 0 0x1000>;
 174                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 175                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 176                 pcie@0 {
 177                         ranges = <0x02000000 0 0xe0000000
 178                                   0x02000000 0 0xe0000000
 179                                   0 0x20000000
 180
 181                                   0x01000000 0 0x00000000
 182                                   0x01000000 0 0x00000000
 183                                   0 0x00010000>;
 184                 };
 185         };
 186
 187         pci1: pcie@ffe201000 {
 188                 reg = <0xf 0xfe201000 0 0x1000>;
 189                 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 190                           0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 191                 pcie@0 {
 192                         ranges = <0x02000000 0 0xe0000000
 193                                   0x02000000 0 0xe0000000
 194                                   0 0x20000000
 195
 196                                   0x01000000 0 0x00000000
 197                                   0x01000000 0 0x00000000
 198                                   0 0x00010000>;
 199                 };
 200         };
 201
 202         pci2: pcie@ffe202000 {
 203                 reg = <0xf 0xfe202000 0 0x1000>;
 204                 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 205                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 206                 pcie@0 {
 207                         ranges = <0x02000000 0 0xe0000000
 208                                   0x02000000 0 0xe0000000
 209                                   0 0x20000000
 210
 211                                   0x01000000 0 0x00000000
 212                                   0x01000000 0 0x00000000
 213                                   0 0x00010000>;
 214                 };
 215         };
 216
 217         pci3: pcie@ffe203000 {
 218                 reg = <0xf 0xfe203000 0 0x1000>;
 219                 ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 220                           0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
 221                 pcie@0 {
 222                         ranges = <0x02000000 0 0xe0000000
 223                                   0x02000000 0 0xe0000000
 224                                   0 0x20000000
 225
 226                                   0x01000000 0 0x00000000
 227                                   0x01000000 0 0x00000000
 228                                   0 0x00010000>;
 229                 };
 230         };
 231 };
 232
 233 /include/ "fsl/p3041si-post.dtsi"