2 * boot.c - Architecture-Specific Low-Level ACPI Boot Support
4 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
5 * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
26 #include <linux/init.h>
27 #include <linux/acpi.h>
28 #include <linux/acpi_pmtmr.h>
29 #include <linux/efi.h>
30 #include <linux/cpumask.h>
31 #include <linux/module.h>
32 #include <linux/dmi.h>
33 #include <linux/irq.h>
34 #include <linux/bootmem.h>
35 #include <linux/ioport.h>
37 #include <asm/pgtable.h>
38 #include <asm/io_apic.h>
41 #include <asm/mpspec.h>
44 static int __initdata acpi_force = 0;
47 EXPORT_SYMBOL(acpi_disabled);
50 # include <asm/proto.h>
53 #define BAD_MADT_ENTRY(entry, end) ( \
54 (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
55 ((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
57 #define PREFIX "ACPI: "
59 int acpi_noirq; /* skip ACPI IRQ initialization */
60 int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */
61 EXPORT_SYMBOL(acpi_pci_disabled);
62 int acpi_ht __initdata = 1; /* enable HT */
68 u8 acpi_sci_flags __initdata;
69 int acpi_sci_override_gsi __initdata;
70 int acpi_skip_timer_override __initdata;
71 int acpi_use_timer_override __initdata;
73 #ifdef CONFIG_X86_LOCAL_APIC
74 static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
77 #ifndef __HAVE_ARCH_CMPXCHG
78 #warning ACPI uses CMPXCHG, i486 and later hardware
81 /* --------------------------------------------------------------------------
82 Boot-time Configuration
83 -------------------------------------------------------------------------- */
86 * The default interrupt routing model is PIC (8259). This gets
87 * overridden if IOAPICs are enumerated (below).
89 enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
93 * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
94 * to map the target physical address. The problem is that set_fixmap()
95 * provides a single page, and it is possible that the page is not
97 * By using this area, we can map up to MAX_IO_APICS pages temporarily,
98 * i.e. until the next __va_range() call.
100 * Important Safety Note: The fixed I/O APIC page numbers are *subtracted*
101 * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and
102 * count idx down while incrementing the phys address.
104 char *__init __acpi_map_table(unsigned long phys, unsigned long size)
110 return early_ioremap(phys, size);
112 void __init __acpi_unmap_table(char *map, unsigned long size)
117 early_iounmap(map, size);
120 #ifdef CONFIG_X86_LOCAL_APIC
121 static int __init acpi_parse_madt(struct acpi_table_header *table)
123 struct acpi_table_madt *madt = NULL;
128 madt = (struct acpi_table_madt *)table;
130 printk(KERN_WARNING PREFIX "Unable to map MADT\n");
135 acpi_lapic_addr = (u64) madt->address;
137 printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
141 default_acpi_madt_oem_check(madt->header.oem_id,
142 madt->header.oem_table_id);
147 static void __cpuinit acpi_register_lapic(int id, u8 enabled)
149 unsigned int ver = 0;
156 if (boot_cpu_physical_apicid != -1U)
157 ver = apic_version[boot_cpu_physical_apicid];
159 generic_processor_info(id, ver);
163 acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
165 struct acpi_madt_local_x2apic *processor = NULL;
167 processor = (struct acpi_madt_local_x2apic *)header;
169 if (BAD_MADT_ENTRY(processor, end))
172 acpi_table_print_madt_entry(header);
174 #ifdef CONFIG_X86_X2APIC
176 * We need to register disabled CPU as well to permit
177 * counting disabled CPUs. This allows us to size
178 * cpus_possible_map more accurately, to permit
179 * to not preallocating memory for all NR_CPUS
180 * when we use CPU hotplug.
182 acpi_register_lapic(processor->local_apic_id, /* APIC ID */
183 processor->lapic_flags & ACPI_MADT_ENABLED);
185 printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
192 acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
194 struct acpi_madt_local_apic *processor = NULL;
196 processor = (struct acpi_madt_local_apic *)header;
198 if (BAD_MADT_ENTRY(processor, end))
201 acpi_table_print_madt_entry(header);
204 * We need to register disabled CPU as well to permit
205 * counting disabled CPUs. This allows us to size
206 * cpus_possible_map more accurately, to permit
207 * to not preallocating memory for all NR_CPUS
208 * when we use CPU hotplug.
210 acpi_register_lapic(processor->id, /* APIC ID */
211 processor->lapic_flags & ACPI_MADT_ENABLED);
217 acpi_parse_sapic(struct acpi_subtable_header *header, const unsigned long end)
219 struct acpi_madt_local_sapic *processor = NULL;
221 processor = (struct acpi_madt_local_sapic *)header;
223 if (BAD_MADT_ENTRY(processor, end))
226 acpi_table_print_madt_entry(header);
228 acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */
229 processor->lapic_flags & ACPI_MADT_ENABLED);
235 acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
236 const unsigned long end)
238 struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL;
240 lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;
242 if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
245 acpi_lapic_addr = lapic_addr_ovr->address;
251 acpi_parse_x2apic_nmi(struct acpi_subtable_header *header,
252 const unsigned long end)
254 struct acpi_madt_local_x2apic_nmi *x2apic_nmi = NULL;
256 x2apic_nmi = (struct acpi_madt_local_x2apic_nmi *)header;
258 if (BAD_MADT_ENTRY(x2apic_nmi, end))
261 acpi_table_print_madt_entry(header);
263 if (x2apic_nmi->lint != 1)
264 printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
270 acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
272 struct acpi_madt_local_apic_nmi *lapic_nmi = NULL;
274 lapic_nmi = (struct acpi_madt_local_apic_nmi *)header;
276 if (BAD_MADT_ENTRY(lapic_nmi, end))
279 acpi_table_print_madt_entry(header);
281 if (lapic_nmi->lint != 1)
282 printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
287 #endif /*CONFIG_X86_LOCAL_APIC */
289 #ifdef CONFIG_X86_IO_APIC
292 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
294 struct acpi_madt_io_apic *ioapic = NULL;
296 ioapic = (struct acpi_madt_io_apic *)header;
298 if (BAD_MADT_ENTRY(ioapic, end))
301 acpi_table_print_madt_entry(header);
303 mp_register_ioapic(ioapic->id,
304 ioapic->address, ioapic->global_irq_base);
310 * Parse Interrupt Source Override for the ACPI SCI
312 static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
314 if (trigger == 0) /* compatible SCI trigger is level */
317 if (polarity == 0) /* compatible SCI polarity is low */
320 /* Command-line over-ride via acpi_sci= */
321 if (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)
322 trigger = (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2;
324 if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK)
325 polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
328 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
329 * If GSI is < 16, this will update its flags,
330 * else it will create a new mp_irqs[] entry.
332 mp_override_legacy_irq(gsi, polarity, trigger, gsi);
335 * stash over-ride to indicate we've been here
336 * and for later update of acpi_gbl_FADT
338 acpi_sci_override_gsi = gsi;
343 acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
344 const unsigned long end)
346 struct acpi_madt_interrupt_override *intsrc = NULL;
348 intsrc = (struct acpi_madt_interrupt_override *)header;
350 if (BAD_MADT_ENTRY(intsrc, end))
353 acpi_table_print_madt_entry(header);
355 if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
356 acpi_sci_ioapic_setup(intsrc->global_irq,
357 intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
358 (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
362 if (acpi_skip_timer_override &&
363 intsrc->source_irq == 0 && intsrc->global_irq == 2) {
364 printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
368 mp_override_legacy_irq(intsrc->source_irq,
369 intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
370 (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
377 acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
379 struct acpi_madt_nmi_source *nmi_src = NULL;
381 nmi_src = (struct acpi_madt_nmi_source *)header;
383 if (BAD_MADT_ENTRY(nmi_src, end))
386 acpi_table_print_madt_entry(header);
388 /* TBD: Support nimsrc entries? */
393 #endif /* CONFIG_X86_IO_APIC */
396 * acpi_pic_sci_set_trigger()
398 * use ELCR to set PIC-mode trigger type for SCI
400 * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
401 * it may require Edge Trigger -- use "acpi_sci=edge"
403 * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
404 * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
405 * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
406 * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
409 void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
411 unsigned int mask = 1 << irq;
412 unsigned int old, new;
414 /* Real old ELCR mask */
415 old = inb(0x4d0) | (inb(0x4d1) << 8);
418 * If we use ACPI to set PCI IRQs, then we should clear ELCR
419 * since we will set it correctly as we enable the PCI irq
422 new = acpi_noirq ? old : 0;
425 * Update SCI information in the ELCR, it isn't in the PCI
429 case 1: /* Edge - clear */
432 case 3: /* Level - set */
440 printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
442 outb(new >> 8, 0x4d1);
445 int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
452 * success: return IRQ number (>=0)
453 * failure: return < 0
455 int acpi_register_gsi(u32 gsi, int triggering, int polarity)
458 unsigned int plat_gsi = gsi;
462 * Make sure all (legacy) PCI IRQs are set as level-triggered.
464 if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
465 if (triggering == ACPI_LEVEL_SENSITIVE)
466 eisa_set_level_irq(gsi);
470 #ifdef CONFIG_X86_IO_APIC
471 if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
472 plat_gsi = mp_register_gsi(gsi, triggering, polarity);
475 acpi_gsi_to_irq(plat_gsi, &irq);
480 * ACPI based hotplug support for CPU
482 #ifdef CONFIG_ACPI_HOTPLUG_CPU
484 static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
486 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
487 union acpi_object *obj;
488 struct acpi_madt_local_apic *lapic;
489 cpumask_var_t tmp_map, new_map;
492 int retval = -ENOMEM;
494 if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
497 if (!buffer.length || !buffer.pointer)
500 obj = buffer.pointer;
501 if (obj->type != ACPI_TYPE_BUFFER ||
502 obj->buffer.length < sizeof(*lapic)) {
503 kfree(buffer.pointer);
507 lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer;
509 if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC ||
510 !(lapic->lapic_flags & ACPI_MADT_ENABLED)) {
511 kfree(buffer.pointer);
517 kfree(buffer.pointer);
518 buffer.length = ACPI_ALLOCATE_BUFFER;
519 buffer.pointer = NULL;
521 if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL))
524 if (!alloc_cpumask_var(&new_map, GFP_KERNEL))
527 cpumask_copy(tmp_map, cpu_present_mask);
528 acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
531 * If mp_register_lapic successfully generates a new logical cpu
532 * number, then the following will get us exactly what was mapped
534 cpumask_andnot(new_map, cpu_present_mask, tmp_map);
535 if (cpumask_empty(new_map)) {
536 printk ("Unable to map lapic to logical cpu number\n");
541 cpu = cpumask_first(new_map);
547 free_cpumask_var(new_map);
549 free_cpumask_var(tmp_map);
554 /* wrapper to silence section mismatch warning */
555 int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu)
557 return _acpi_map_lsapic(handle, pcpu);
559 EXPORT_SYMBOL(acpi_map_lsapic);
561 int acpi_unmap_lsapic(int cpu)
563 per_cpu(x86_cpu_to_apicid, cpu) = -1;
564 set_cpu_present(cpu, false);
570 EXPORT_SYMBOL(acpi_unmap_lsapic);
571 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
573 int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
579 EXPORT_SYMBOL(acpi_register_ioapic);
581 int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
587 EXPORT_SYMBOL(acpi_unregister_ioapic);
589 static int __init acpi_parse_sbf(struct acpi_table_header *table)
591 struct acpi_table_boot *sb;
593 sb = (struct acpi_table_boot *)table;
595 printk(KERN_WARNING PREFIX "Unable to map SBF\n");
599 sbf_port = sb->cmos_index; /* Save CMOS port */
604 #ifdef CONFIG_HPET_TIMER
605 #include <asm/hpet.h>
607 static struct __initdata resource *hpet_res;
609 static int __init acpi_parse_hpet(struct acpi_table_header *table)
611 struct acpi_table_hpet *hpet_tbl;
613 hpet_tbl = (struct acpi_table_hpet *)table;
615 printk(KERN_WARNING PREFIX "Unable to map HPET\n");
619 if (hpet_tbl->address.space_id != ACPI_SPACE_MEM) {
620 printk(KERN_WARNING PREFIX "HPET timers must be located in "
625 hpet_address = hpet_tbl->address.address;
628 * Some broken BIOSes advertise HPET at 0x0. We really do not
629 * want to allocate a resource there.
632 printk(KERN_WARNING PREFIX
633 "HPET id: %#x base: %#lx is invalid\n",
634 hpet_tbl->id, hpet_address);
639 * Some even more broken BIOSes advertise HPET at
640 * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
643 if (hpet_address == 0xfed0000000000000UL) {
644 if (!hpet_force_user) {
645 printk(KERN_WARNING PREFIX "HPET id: %#x "
646 "base: 0xfed0000000000000 is bogus\n "
647 "try hpet=force on the kernel command line to "
648 "fix it up to 0xfed00000.\n", hpet_tbl->id);
652 printk(KERN_WARNING PREFIX
653 "HPET id: %#x base: 0xfed0000000000000 fixed up "
654 "to 0xfed00000.\n", hpet_tbl->id);
658 printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
659 hpet_tbl->id, hpet_address);
662 * Allocate and initialize the HPET firmware resource for adding into
663 * the resource tree during the lateinit timeframe.
665 #define HPET_RESOURCE_NAME_SIZE 9
666 hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE);
668 hpet_res->name = (void *)&hpet_res[1];
669 hpet_res->flags = IORESOURCE_MEM;
670 snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
673 hpet_res->start = hpet_address;
674 hpet_res->end = hpet_address + (1 * 1024) - 1;
680 * hpet_insert_resource inserts the HPET resources used into the resource
683 static __init int hpet_insert_resource(void)
688 return insert_resource(&iomem_resource, hpet_res);
691 late_initcall(hpet_insert_resource);
694 #define acpi_parse_hpet NULL
697 static int __init acpi_parse_fadt(struct acpi_table_header *table)
700 #ifdef CONFIG_X86_PM_TIMER
701 /* detect the location of the ACPI PM Timer */
702 if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) {
704 if (acpi_gbl_FADT.xpm_timer_block.space_id !=
705 ACPI_ADR_SPACE_SYSTEM_IO)
708 pmtmr_ioport = acpi_gbl_FADT.xpm_timer_block.address;
710 * "X" fields are optional extensions to the original V1.0
711 * fields, so we must selectively expand V1.0 fields if the
712 * corresponding X field is zero.
715 pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
718 pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
721 printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n",
727 #ifdef CONFIG_X86_LOCAL_APIC
729 * Parse LAPIC entries in MADT
730 * returns 0 on success, < 0 on error
733 static void __init acpi_register_lapic_address(unsigned long address)
735 mp_lapic_addr = address;
737 set_fixmap_nocache(FIX_APIC_BASE, address);
738 if (boot_cpu_physical_apicid == -1U) {
739 boot_cpu_physical_apicid = read_apic_id();
740 apic_version[boot_cpu_physical_apicid] =
741 GET_APIC_VERSION(apic_read(APIC_LVR));
745 static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
753 * Note that the LAPIC address is obtained from the MADT (32-bit value)
754 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
758 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
759 acpi_parse_lapic_addr_ovr, 0);
761 printk(KERN_ERR PREFIX
762 "Error parsing LAPIC address override entry\n");
766 acpi_register_lapic_address(acpi_lapic_addr);
771 static int __init acpi_parse_madt_lapic_entries(void)
780 * Note that the LAPIC address is obtained from the MADT (32-bit value)
781 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
785 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
786 acpi_parse_lapic_addr_ovr, 0);
788 printk(KERN_ERR PREFIX
789 "Error parsing LAPIC address override entry\n");
793 acpi_register_lapic_address(acpi_lapic_addr);
795 count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
796 acpi_parse_sapic, MAX_APICS);
799 x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC,
800 acpi_parse_x2apic, MAX_APICS);
801 count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
802 acpi_parse_lapic, MAX_APICS);
804 if (!count && !x2count) {
805 printk(KERN_ERR PREFIX "No LAPIC entries present\n");
806 /* TBD: Cleanup to allow fallback to MPS */
808 } else if (count < 0 || x2count < 0) {
809 printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
810 /* TBD: Cleanup to allow fallback to MPS */
815 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC_NMI,
816 acpi_parse_x2apic_nmi, 0);
818 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0);
819 if (count < 0 || x2count < 0) {
820 printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
821 /* TBD: Cleanup to allow fallback to MPS */
826 #endif /* CONFIG_X86_LOCAL_APIC */
828 #ifdef CONFIG_X86_IO_APIC
831 #ifdef CONFIG_X86_ES7000
832 extern int es7000_plat;
839 DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
840 } mp_ioapic_routing[MAX_IO_APICS];
842 int mp_find_ioapic(int gsi)
846 /* Find the IOAPIC that manages this GSI. */
847 for (i = 0; i < nr_ioapics; i++) {
848 if ((gsi >= mp_ioapic_routing[i].gsi_base)
849 && (gsi <= mp_ioapic_routing[i].gsi_end))
853 printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
857 int mp_find_ioapic_pin(int ioapic, int gsi)
859 if (WARN_ON(ioapic == -1))
861 if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
864 return gsi - mp_ioapic_routing[ioapic].gsi_base;
867 static u8 __init uniq_ioapic_id(u8 id)
870 if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
871 !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
872 return io_apic_get_unique_id(nr_ioapics, id);
877 DECLARE_BITMAP(used, 256);
878 bitmap_zero(used, 256);
879 for (i = 0; i < nr_ioapics; i++) {
880 struct mpc_ioapic *ia = &mp_ioapics[i];
881 __set_bit(ia->apicid, used);
883 if (!test_bit(id, used))
885 return find_first_zero_bit(used, 256);
889 static int bad_ioapic(unsigned long address)
891 if (nr_ioapics >= MAX_IO_APICS) {
892 printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
893 "(found %d)\n", MAX_IO_APICS, nr_ioapics);
894 panic("Recompile kernel with bigger MAX_IO_APICS!\n");
897 printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
898 " found in table, skipping!\n");
904 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
908 if (bad_ioapic(address))
913 mp_ioapics[idx].type = MP_IOAPIC;
914 mp_ioapics[idx].flags = MPC_APIC_USABLE;
915 mp_ioapics[idx].apicaddr = address;
917 set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
918 mp_ioapics[idx].apicid = uniq_ioapic_id(id);
920 mp_ioapics[idx].apicver = io_apic_get_version(idx);
922 mp_ioapics[idx].apicver = 0;
925 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
926 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
928 mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
929 mp_ioapic_routing[idx].gsi_base = gsi_base;
930 mp_ioapic_routing[idx].gsi_end = gsi_base +
931 io_apic_get_redir_entries(idx);
933 printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
934 "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
935 mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
936 mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
941 int __init acpi_probe_gsi(void)
954 for (idx = 0; idx < nr_ioapics; idx++) {
955 gsi = mp_ioapic_routing[idx].gsi_end;
964 static void assign_to_mp_irq(struct mpc_intsrc *m,
965 struct mpc_intsrc *mp_irq)
967 memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
970 static int mp_irq_cmp(struct mpc_intsrc *mp_irq,
971 struct mpc_intsrc *m)
973 return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
976 static void save_mp_irq(struct mpc_intsrc *m)
980 for (i = 0; i < mp_irq_entries; i++) {
981 if (!mp_irq_cmp(&mp_irqs[i], m))
985 assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
986 if (++mp_irq_entries == MAX_IRQ_SOURCES)
987 panic("Max # of irq sources exceeded!!\n");
990 void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
994 struct mpc_intsrc mp_irq;
997 * Convert 'gsi' to 'ioapic.pin'.
999 ioapic = mp_find_ioapic(gsi);
1002 pin = mp_find_ioapic_pin(ioapic, gsi);
1005 * TBD: This check is for faulty timer entries, where the override
1006 * erroneously sets the trigger to level, resulting in a HUGE
1007 * increase of timer interrupts!
1009 if ((bus_irq == 0) && (trigger == 3))
1012 mp_irq.type = MP_INTSRC;
1013 mp_irq.irqtype = mp_INT;
1014 mp_irq.irqflag = (trigger << 2) | polarity;
1015 mp_irq.srcbus = MP_ISA_BUS;
1016 mp_irq.srcbusirq = bus_irq; /* IRQ */
1017 mp_irq.dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */
1018 mp_irq.dstirq = pin; /* INTIN# */
1020 save_mp_irq(&mp_irq);
1023 void __init mp_config_acpi_legacy_irqs(void)
1027 unsigned int dstapic;
1028 struct mpc_intsrc mp_irq;
1030 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
1032 * Fabricate the legacy ISA bus (bus #31).
1034 mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
1036 set_bit(MP_ISA_BUS, mp_bus_not_pci);
1037 pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
1039 #ifdef CONFIG_X86_ES7000
1041 * Older generations of ES7000 have no legacy identity mappings
1043 if (es7000_plat == 1)
1048 * Locate the IOAPIC that manages the ISA IRQs (0-15).
1050 ioapic = mp_find_ioapic(0);
1053 dstapic = mp_ioapics[ioapic].apicid;
1056 * Use the default configuration for the IRQs 0-15. Unless
1057 * overridden by (MADT) interrupt source override entries.
1059 for (i = 0; i < 16; i++) {
1062 for (idx = 0; idx < mp_irq_entries; idx++) {
1063 struct mpc_intsrc *irq = mp_irqs + idx;
1065 /* Do we already have a mapping for this ISA IRQ? */
1066 if (irq->srcbus == MP_ISA_BUS && irq->srcbusirq == i)
1069 /* Do we already have a mapping for this IOAPIC pin */
1070 if (irq->dstapic == dstapic && irq->dstirq == i)
1074 if (idx != mp_irq_entries) {
1075 printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
1076 continue; /* IRQ already used */
1079 mp_irq.type = MP_INTSRC;
1080 mp_irq.irqflag = 0; /* Conforming */
1081 mp_irq.srcbus = MP_ISA_BUS;
1082 mp_irq.dstapic = dstapic;
1083 mp_irq.irqtype = mp_INT;
1084 mp_irq.srcbusirq = i; /* Identity mapped */
1087 save_mp_irq(&mp_irq);
1091 int mp_register_gsi(u32 gsi, int triggering, int polarity)
1095 #ifdef CONFIG_X86_32
1096 #define MAX_GSI_NUM 4096
1097 #define IRQ_COMPRESSION_START 64
1099 static int pci_irq = IRQ_COMPRESSION_START;
1101 * Mapping between Global System Interrupts, which
1102 * represent all possible interrupts, and IRQs
1103 * assigned to actual devices.
1105 static int gsi_to_irq[MAX_GSI_NUM];
1108 if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
1112 /* Don't set up the ACPI SCI because it's already set up */
1113 if (acpi_gbl_FADT.sci_interrupt == gsi)
1116 ioapic = mp_find_ioapic(gsi);
1118 printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
1122 ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
1124 #ifdef CONFIG_X86_32
1125 if (ioapic_renumber_irq)
1126 gsi = ioapic_renumber_irq(ioapic, gsi);
1130 * Avoid pin reprogramming. PRTs typically include entries
1131 * with redundant pin->gsi mappings (but unique PCI devices);
1132 * we only program the IOAPIC on the first.
1134 if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
1135 printk(KERN_ERR "Invalid reference to IOAPIC pin "
1136 "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
1140 if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
1141 pr_debug("Pin %d-%d already programmed\n",
1142 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
1143 #ifdef CONFIG_X86_32
1144 return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
1150 set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
1151 #ifdef CONFIG_X86_32
1153 * For GSI >= 64, use IRQ compression
1155 if ((gsi >= IRQ_COMPRESSION_START)
1156 && (triggering == ACPI_LEVEL_SENSITIVE)) {
1158 * For PCI devices assign IRQs in order, avoiding gaps
1159 * due to unused I/O APIC pins.
1162 if (gsi < MAX_GSI_NUM) {
1164 * Retain the VIA chipset work-around (gsi > 15), but
1165 * avoid a problem where the 8254 timer (IRQ0) is setup
1166 * via an override (so it's not on pin 0 of the ioapic),
1167 * and at the same time, the pin 0 interrupt is a PCI
1168 * type. The gsi > 15 test could cause these two pins
1169 * to be shared as IRQ0, and they are not shareable.
1170 * So test for this condition, and if necessary, avoid
1171 * the pin collision.
1175 * Don't assign IRQ used by ACPI SCI
1177 if (gsi == acpi_gbl_FADT.sci_interrupt)
1179 gsi_to_irq[irq] = gsi;
1181 printk(KERN_ERR "GSI %u is too high\n", gsi);
1186 io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
1187 triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
1188 polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
1192 int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
1193 u32 gsi, int triggering, int polarity)
1195 #ifdef CONFIG_X86_MPPARSE
1196 struct mpc_intsrc mp_irq;
1202 /* print the entry should happen on mptable identically */
1203 mp_irq.type = MP_INTSRC;
1204 mp_irq.irqtype = mp_INT;
1205 mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
1206 (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
1207 mp_irq.srcbus = number;
1208 mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
1209 ioapic = mp_find_ioapic(gsi);
1210 mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
1211 mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
1213 save_mp_irq(&mp_irq);
1219 * Parse IOAPIC related entries in MADT
1220 * returns 0 on success, < 0 on error
1222 static int __init acpi_parse_madt_ioapic_entries(void)
1227 * ACPI interpreter is required to complete interrupt setup,
1228 * so if it is off, don't enumerate the io-apics with ACPI.
1229 * If MPS is present, it will handle them,
1230 * otherwise the system will stay in PIC mode
1232 if (acpi_disabled || acpi_noirq) {
1240 * if "noapic" boot option, don't look for IO-APICs
1242 if (skip_ioapic_setup) {
1243 printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
1244 "due to 'noapic' option.\n");
1249 acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC, acpi_parse_ioapic,
1252 printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
1254 } else if (count < 0) {
1255 printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
1260 acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
1263 printk(KERN_ERR PREFIX
1264 "Error parsing interrupt source overrides entry\n");
1265 /* TBD: Cleanup to allow fallback to MPS */
1270 * If BIOS did not supply an INT_SRC_OVR for the SCI
1271 * pretend we got one so we can set the SCI flags.
1273 if (!acpi_sci_override_gsi)
1274 acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
1276 /* Fill in identity legacy mapings where no override */
1277 mp_config_acpi_legacy_irqs();
1280 acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src,
1283 printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
1284 /* TBD: Cleanup to allow fallback to MPS */
1291 static inline int acpi_parse_madt_ioapic_entries(void)
1295 #endif /* !CONFIG_X86_IO_APIC */
1297 static void __init early_acpi_process_madt(void)
1299 #ifdef CONFIG_X86_LOCAL_APIC
1302 if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
1305 * Parse MADT LAPIC entries
1307 error = early_acpi_parse_madt_lapic_addr_ovr();
1310 smp_found_config = 1;
1312 if (error == -EINVAL) {
1314 * Dell Precision Workstation 410, 610 come here.
1316 printk(KERN_ERR PREFIX
1317 "Invalid BIOS MADT, disabling ACPI\n");
1324 static void __init acpi_process_madt(void)
1326 #ifdef CONFIG_X86_LOCAL_APIC
1329 if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
1332 * Parse MADT LAPIC entries
1334 error = acpi_parse_madt_lapic_entries();
1338 #ifdef CONFIG_X86_BIGSMP
1339 generic_bigsmp_probe();
1342 * Parse MADT IO-APIC entries
1344 error = acpi_parse_madt_ioapic_entries();
1346 acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
1349 smp_found_config = 1;
1350 if (apic->setup_apic_routing)
1351 apic->setup_apic_routing();
1354 if (error == -EINVAL) {
1356 * Dell Precision Workstation 410, 610 come here.
1358 printk(KERN_ERR PREFIX
1359 "Invalid BIOS MADT, disabling ACPI\n");
1364 * ACPI found no MADT, and so ACPI wants UP PIC mode.
1365 * In the event an MPS table was found, forget it.
1366 * Boot with "acpi=off" to use MPS on such a system.
1368 if (smp_found_config) {
1369 printk(KERN_WARNING PREFIX
1370 "No APIC-table, disabling MPS\n");
1371 smp_found_config = 0;
1376 * ACPI supports both logical (e.g. Hyper-Threading) and physical
1377 * processors, where MPS only supports physical.
1379 if (acpi_lapic && acpi_ioapic)
1380 printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
1382 else if (acpi_lapic)
1383 printk(KERN_INFO "Using ACPI for processor (LAPIC) "
1384 "configuration information\n");
1389 static int __init disable_acpi_irq(const struct dmi_system_id *d)
1392 printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
1399 static int __init disable_acpi_pci(const struct dmi_system_id *d)
1402 printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
1409 static int __init dmi_disable_acpi(const struct dmi_system_id *d)
1412 printk(KERN_NOTICE "%s detected: acpi off\n", d->ident);
1416 "Warning: DMI blacklist says broken, but acpi forced\n");
1422 * Limit ACPI to CPU enumeration for HT
1424 static int __init force_acpi_ht(const struct dmi_system_id *d)
1427 printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
1433 "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
1439 * Force ignoring BIOS IRQ0 pin2 override
1441 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
1444 * The ati_ixp4x0_rev() early PCI quirk should have set
1445 * the acpi_skip_timer_override flag already:
1447 if (!acpi_skip_timer_override) {
1448 WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
1449 pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
1451 acpi_skip_timer_override = 1;
1457 * If your system is blacklisted here, but you find that acpi=force
1458 * works for you, please contact linux-acpi@vger.kernel.org
1460 static struct dmi_system_id __initdata acpi_dmi_table[] = {
1462 * Boxes that need ACPI disabled
1465 .callback = dmi_disable_acpi,
1466 .ident = "IBM Thinkpad",
1468 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1469 DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
1474 * Boxes that need acpi=ht
1477 .callback = force_acpi_ht,
1478 .ident = "FSC Primergy T850",
1480 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
1481 DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
1485 .callback = force_acpi_ht,
1486 .ident = "HP VISUALIZE NT Workstation",
1488 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
1489 DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
1493 .callback = force_acpi_ht,
1494 .ident = "Compaq Workstation W8000",
1496 DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
1497 DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
1501 .callback = force_acpi_ht,
1502 .ident = "ASUS P2B-DS",
1504 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1505 DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
1509 .callback = force_acpi_ht,
1510 .ident = "ASUS CUR-DLS",
1512 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1513 DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
1517 .callback = force_acpi_ht,
1518 .ident = "ABIT i440BX-W83977",
1520 DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
1521 DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
1525 .callback = force_acpi_ht,
1526 .ident = "IBM Bladecenter",
1528 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1529 DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
1533 .callback = force_acpi_ht,
1534 .ident = "IBM eServer xSeries 360",
1536 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1537 DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
1541 .callback = force_acpi_ht,
1542 .ident = "IBM eserver xSeries 330",
1544 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1545 DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
1549 .callback = force_acpi_ht,
1550 .ident = "IBM eserver xSeries 440",
1552 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1553 DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
1558 * Boxes that need ACPI PCI IRQ routing disabled
1561 .callback = disable_acpi_irq,
1562 .ident = "ASUS A7V",
1564 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
1565 DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
1566 /* newer BIOS, Revision 1011, does work */
1567 DMI_MATCH(DMI_BIOS_VERSION,
1568 "ASUS A7V ACPI BIOS Revision 1007"),
1573 * Latest BIOS for IBM 600E (1.16) has bad pcinum
1574 * for LPC bridge, which is needed for the PCI
1575 * interrupt links to work. DSDT fix is in bug 5966.
1576 * 2645, 2646 model numbers are shared with 600/600E/600X
1578 .callback = disable_acpi_irq,
1579 .ident = "IBM Thinkpad 600 Series 2645",
1581 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1582 DMI_MATCH(DMI_BOARD_NAME, "2645"),
1586 .callback = disable_acpi_irq,
1587 .ident = "IBM Thinkpad 600 Series 2646",
1589 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1590 DMI_MATCH(DMI_BOARD_NAME, "2646"),
1594 * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
1597 .callback = disable_acpi_pci,
1598 .ident = "ASUS PR-DLS",
1600 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1601 DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
1602 DMI_MATCH(DMI_BIOS_VERSION,
1603 "ASUS PR-DLS ACPI BIOS Revision 1010"),
1604 DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
1608 .callback = disable_acpi_pci,
1609 .ident = "Acer TravelMate 36x Laptop",
1611 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
1612 DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
1618 /* second table for DMI checks that should run after early-quirks */
1619 static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
1621 * HP laptops which use a DSDT reporting as HP/SB400/10000,
1622 * which includes some code which overrides all temperature
1623 * trip points to 16C if the INTIN2 input of the I/O APIC
1624 * is enabled. This input is incorrectly designated the
1625 * ISA IRQ 0 via an interrupt source override even though
1626 * it is wired to the output of the master 8259A and INTIN0
1627 * is not connected at all. Force ignoring BIOS IRQ0 pin2
1628 * override in that cases.
1631 .callback = dmi_ignore_irq0_timer_override,
1632 .ident = "HP nx6115 laptop",
1634 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1635 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
1639 .callback = dmi_ignore_irq0_timer_override,
1640 .ident = "HP NX6125 laptop",
1642 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1643 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
1647 .callback = dmi_ignore_irq0_timer_override,
1648 .ident = "HP NX6325 laptop",
1650 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1651 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
1655 .callback = dmi_ignore_irq0_timer_override,
1656 .ident = "HP 6715b laptop",
1658 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1659 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
1666 * acpi_boot_table_init() and acpi_boot_init()
1667 * called from setup_arch(), always.
1668 * 1. checksums all tables
1669 * 2. enumerates lapics
1670 * 3. enumerates io-apics
1672 * acpi_table_init() is separate to allow reading SRAT without
1673 * other side effects.
1675 * side effects of acpi_boot_init:
1676 * acpi_lapic = 1 if LAPIC found
1677 * acpi_ioapic = 1 if IOAPIC found
1678 * if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
1679 * if acpi_blacklisted() acpi_disabled = 1;
1680 * acpi_irq_model=...
1683 * return value: (currently ignored)
1688 int __init acpi_boot_table_init(void)
1692 dmi_check_system(acpi_dmi_table);
1695 * If acpi_disabled, bail out
1696 * One exception: acpi=ht continues far enough to enumerate LAPICs
1698 if (acpi_disabled && !acpi_ht)
1702 * Initialize the ACPI boot-time table parser.
1704 error = acpi_table_init();
1710 acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
1713 * blacklist may disable ACPI entirely
1715 error = acpi_blacklisted();
1718 printk(KERN_WARNING PREFIX "acpi=force override\n");
1720 printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
1729 int __init early_acpi_boot_init(void)
1732 * If acpi_disabled, bail out
1733 * One exception: acpi=ht continues far enough to enumerate LAPICs
1735 if (acpi_disabled && !acpi_ht)
1739 * Process the Multiple APIC Description Table (MADT), if present
1741 early_acpi_process_madt();
1746 int __init acpi_boot_init(void)
1748 /* those are executed after early-quirks are executed */
1749 dmi_check_system(acpi_dmi_table_late);
1752 * If acpi_disabled, bail out
1753 * One exception: acpi=ht continues far enough to enumerate LAPICs
1755 if (acpi_disabled && !acpi_ht)
1758 acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
1761 * set sci_int and PM timer address
1763 acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt);
1766 * Process the Multiple APIC Description Table (MADT), if present
1768 acpi_process_madt();
1770 acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
1775 static int __init parse_acpi(char *arg)
1780 /* "acpi=off" disables both ACPI table parsing and interpreter */
1781 if (strcmp(arg, "off") == 0) {
1784 /* acpi=force to over-ride black-list */
1785 else if (strcmp(arg, "force") == 0) {
1790 /* acpi=strict disables out-of-spec workarounds */
1791 else if (strcmp(arg, "strict") == 0) {
1794 /* Limit ACPI just to boot-time to enable HT */
1795 else if (strcmp(arg, "ht") == 0) {
1800 /* acpi=rsdt use RSDT instead of XSDT */
1801 else if (strcmp(arg, "rsdt") == 0) {
1802 acpi_rsdt_forced = 1;
1804 /* "acpi=noirq" disables ACPI interrupt routing */
1805 else if (strcmp(arg, "noirq") == 0) {
1808 /* Core will printk when we return error. */
1813 early_param("acpi", parse_acpi);
1815 /* FIXME: Using pci= for an ACPI parameter is a travesty. */
1816 static int __init parse_pci(char *arg)
1818 if (arg && strcmp(arg, "noacpi") == 0)
1822 early_param("pci", parse_pci);
1824 int __init acpi_mps_check(void)
1826 #if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
1827 /* mptable code is not built-in*/
1828 if (acpi_disabled || acpi_noirq) {
1829 printk(KERN_WARNING "MPS support code is not built-in.\n"
1830 "Using acpi=off or acpi=noirq or pci=noacpi "
1831 "may have problem\n");
1838 #ifdef CONFIG_X86_IO_APIC
1839 static int __init parse_acpi_skip_timer_override(char *arg)
1841 acpi_skip_timer_override = 1;
1844 early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override);
1846 static int __init parse_acpi_use_timer_override(char *arg)
1848 acpi_use_timer_override = 1;
1851 early_param("acpi_use_timer_override", parse_acpi_use_timer_override);
1852 #endif /* CONFIG_X86_IO_APIC */
1854 static int __init setup_acpi_sci(char *s)
1858 if (!strcmp(s, "edge"))
1859 acpi_sci_flags = ACPI_MADT_TRIGGER_EDGE |
1860 (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
1861 else if (!strcmp(s, "level"))
1862 acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL |
1863 (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
1864 else if (!strcmp(s, "high"))
1865 acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH |
1866 (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
1867 else if (!strcmp(s, "low"))
1868 acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW |
1869 (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
1874 early_param("acpi_sci", setup_acpi_sci);
1876 int __acpi_acquire_global_lock(unsigned int *lock)
1878 unsigned int old, new, val;
1881 new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
1882 val = cmpxchg(lock, old, new);
1883 } while (unlikely (val != old));
1884 return (new < 3) ? -1 : 0;
1887 int __acpi_release_global_lock(unsigned int *lock)
1889 unsigned int old, new, val;
1893 val = cmpxchg(lock, old, new);
1894 } while (unlikely (val != old));