1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_XSCALE_TRITON_X current ;
34 package -hardware CYGPKG_IO_FLASH current ;
35 package -hardware CYGPKG_DEVS_FLASH_STRATA current ;
36 package -hardware CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON current ;
37 package CYGPKG_HAL current ;
38 package CYGPKG_INFRA current ;
39 package CYGPKG_REDBOOT current ;
40 package CYGPKG_ISOINFRA current ;
41 package CYGPKG_LIBC_STRING current ;
42 package CYGPKG_NS_DNS current ;
43 package CYGPKG_CRC current ;
46 # ---- conflicts -------------------------------------------------------
47 # There are no conflicts.
49 # ---- contents --------------------------------------------------------
52 # Global build options
53 # Global build options including control over
54 # compiler flags, linker flags and choice of toolchain.
56 cdl_component CYGBLD_GLOBAL_OPTIONS {
57 # There is no associated value.
59 # The following properties are affected by this value
63 # Global command prefix
64 # This option specifies the command prefix used when
65 # invoking the build tools.
67 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
71 # Default value: xscale-elf
74 # Global compiler flags
75 # This option controls the global compiler flags which are used to
76 # compile all packages by default. Individual packages may define
77 # options which override these global flags.
79 cdl_option CYGBLD_GLOBAL_CFLAGS {
81 # No user value, uncomment the following line to provide one.
82 # user_value "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
83 # value_source default
84 # Default value: "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
86 # The following properties are affected by this value
87 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
88 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
89 # option CYGBLD_INFRA_CFLAGS_PIPE
90 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
94 # This option controls the global linker flags. Individual
95 # packages may define options which override these global flags.
97 cdl_option CYGBLD_GLOBAL_LDFLAGS {
99 # No user value, uncomment the following line to provide one.
100 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
101 # value_source default
102 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
105 # Build GDB stub ROM image
106 # This option enables the building of the GDB stubs for the
107 # board. The common HAL controls takes care of most of the
108 # build process, but the final conversion from ELF image to
109 # binary data is handled by the platform CDL, allowing
110 # relocation of the data if necessary.
112 cdl_option CYGBLD_BUILD_GDB_STUBS {
114 # No user value, uncomment the following line to provide one.
116 # value_source default
118 # Requires: CYG_HAL_STARTUP == "ROM"
119 # CYG_HAL_STARTUP == ROM
121 # Requires: CYGSEM_HAL_ROM_MONITOR
122 # CYGSEM_HAL_ROM_MONITOR == 1
124 # Requires: CYGBLD_BUILD_COMMON_GDB_STUBS
125 # CYGBLD_BUILD_COMMON_GDB_STUBS == 0
127 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
128 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
130 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
131 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
133 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
134 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
136 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
137 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
139 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
140 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
144 # Build common GDB stub ROM image
145 # Unless a target board has specific requirements to the
146 # stub implementation, it can use a simple common stub.
147 # This option, which gets enabled by platform HALs as
148 # appropriate, controls the building of the common stub.
150 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
152 # No user value, uncomment the following line to provide one.
154 # value_source default
156 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
157 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
160 # The following properties are affected by this value
161 # option CYGBLD_BUILD_GDB_STUBS
162 # Requires: CYGBLD_BUILD_COMMON_GDB_STUBS
166 # ISO C library string functions
168 # This package provides string functions specified by the
169 # ISO C standard - ISO/IEC 9899:1990.
171 cdl_package CYGPKG_LIBC_STRING {
172 # Packages cannot be added or removed, nor can their version be changed,
173 # simply by editing their value. Instead the appropriate configuration
174 # should be used to perform these actions.
176 # This value cannot be modified here.
178 # Current value: 1 current
179 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
180 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
182 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
183 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
185 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
186 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
188 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
189 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
191 # Requires: CYGPKG_ISOINFRA
192 # CYGPKG_ISOINFRA == current
197 # Inline versions of <string.h> functions
198 # This option chooses whether some of the
199 # particularly simple string functions from
200 # <string.h> are available as inline
201 # functions. This may improve performance, and as
202 # the functions are small, may even improve code
205 cdl_option CYGIMP_LIBC_STRING_INLINES {
207 # No user value, uncomment the following line to provide one.
209 # value_source default
213 # Optimize string functions for code size
214 # This option tries to reduce string function
215 # code size at the expense of execution speed. The
216 # same effect can be produced if the code is
217 # compiled with the -Os option to the compiler.
219 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
221 # No user value, uncomment the following line to provide one.
223 # value_source default
227 # Provide BSD compatibility functions
228 # Enabling this option causes various compatibility functions
229 # commonly found in the BSD UNIX operating system to be included.
230 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
231 # strncasecmp, index, rindex and swab.
233 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
235 # No user value, uncomment the following line to provide one.
237 # The inferred value should not be edited directly.
239 # value_source inferred
241 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
242 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
244 # Requires: CYGINT_ISO_CTYPE
245 # CYGINT_ISO_CTYPE == 0
250 # These options control the behaviour of the
251 # strtok() and strtok_r() string tokenization
254 cdl_component CYGPKG_LIBC_STRING_STRTOK {
255 # There is no associated value.
259 # Per-thread strtok()
260 # This option controls whether the string function
261 # strtok() has its state recorded on a per-thread
262 # basis rather than global. If this option is
263 # disabled, some per-thread space can be saved.
264 # Note there is also a POSIX-standard strtok_r()
265 # function to achieve a similar effect with user
266 # support. Enabling this option will use one slot
267 # of kernel per-thread data. You should ensure you
268 # have enough slots configured for all your
271 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
272 # This option is not active
273 # ActiveIf constraint: CYGPKG_KERNEL
274 # CYGPKG_KERNEL (unknown) == 0
278 # No user value, uncomment the following line to provide one.
280 # value_source default
281 # Default value: CYGVAR_KERNEL_THREADS_DATA
282 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
284 # Requires: CYGVAR_KERNEL_THREADS_DATA
285 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
290 # Trace verbosity level for debugging the <string.h>
291 # functions strtok() and strtok_r(). Increase this
292 # value to get additional trace output.
294 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
296 # No user value, uncomment the following line to provide one.
298 # value_source default
300 # Legal values: 0 to 1
304 # C library string functions build options
305 # Package specific build options including control over
306 # compiler flags used only in building this package,
307 # and details of which tests are built.
309 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
310 # There is no associated value.
314 # Additional compiler flags
315 # This option modifies the set of compiler flags for
316 # building the C library. These flags are used in addition
317 # to the set of global flags.
319 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
321 # No user value, uncomment the following line to provide one.
323 # value_source default
327 # Suppressed compiler flags
328 # This option modifies the set of compiler flags for
329 # building the C library. These flags are removed from
330 # the set of global flags if present.
332 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
334 # No user value, uncomment the following line to provide one.
336 # value_source default
340 # C library string function tests
341 # This option specifies the set of tests for the C library
344 cdl_option CYGPKG_LIBC_STRING_TESTS {
345 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
347 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
353 # FLASH device drivers
354 # This option enables drivers for basic I/O services on
357 cdl_package CYGPKG_IO_FLASH {
358 # Packages cannot be added or removed, nor can their version be changed,
359 # simply by editing their value. Instead the appropriate configuration
360 # should be used to perform these actions.
362 # This value cannot be modified here.
364 # Current value: 1 current
365 # Requires: CYGPKG_ISOINFRA
366 # CYGPKG_ISOINFRA == current
368 # Requires: CYGINT_ISO_STRING_STRFUNCS
369 # CYGINT_ISO_STRING_STRFUNCS == 1
372 # The following properties are affected by this value
373 # package CYGPKG_DEVS_FLASH_STRATA
374 # ActiveIf: CYGPKG_IO_FLASH
375 # package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON
376 # ActiveIf: CYGPKG_IO_FLASH
380 # Extra memory required by FLASH device drivers
381 # Use this option to control how much extra memory is used
382 # by the FLASH drivers to perform certain operations. This
383 # memory is used to hold driver functions in RAM (for platforms
384 # which require it). The value should thus be large enough
385 # to hold any such driver. Reducing this value will make
386 # more RAM available to general programs.
388 cdl_option CYGNUM_FLASH_WORKSPACE_SIZE {
390 # No user value, uncomment the following line to provide one.
391 # user_value 0x00001000
392 # value_source default
393 # Default value: 0x00001000
396 # Hardware FLASH device drivers
397 # This option enables the hardware device drivers
398 # for the current platform.
400 cdl_interface CYGHWR_IO_FLASH_DEVICE {
401 # Implemented by CYGPKG_DEVS_FLASH_STRATA, active, enabled
402 # This value cannot be modified here.
406 # The following properties are affected by this value
407 # component CYGPKG_REDBOOT_FLASH
408 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
411 # Hardware FLASH device drivers are not in RAM
412 # This option makes the IO driver copy the device
413 # driver functions to RAM before calling them. Newer
414 # drivers should make sure that the functions are
415 # linked to RAM by putting them in .2ram sections.
417 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
418 # Implemented by CYGOPT_DEVS_FLASH_STRATA_NOT_IN_RAM, active, enabled
419 # This value cannot be modified here.
423 # The following properties are affected by this value
426 # Hardware can support block locking
427 # This option will be enabled by devices which can support
428 # locking (write-protection) of individual blocks.
430 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
431 # Implemented by CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON, active, enabled
432 # This value cannot be modified here.
436 # The following properties are affected by this value
437 # component CYGPKG_DEVS_FLASH_STRATA_LOCKING
438 # ActiveIf: 0 < CYGHWR_IO_FLASH_BLOCK_LOCKING
439 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
440 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
443 # Verify data programmed to flash
444 # Selecting this option will cause verification of data
445 # programmed to flash.
447 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
449 # No user value, uncomment the following line to provide one.
451 # value_source default
455 # Platform has flash soft DIP switch write-protect
456 # Selecting this option will cause the state of a hardware jumper or
457 # dipswitch to be read by software to determine whether the flash is
458 # write-protected or not.
460 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
462 # No user value, uncomment the following line to provide one.
464 # value_source default
468 # Instantiate in I/O block device API
469 # Provides a block device accessible using the standard I/O
470 # API ( cyg_io_read() etc. )
472 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
473 # This option is not active
474 # ActiveIf constraint: CYGPKG_IO
475 # CYGPKG_IO (unknown) == 0
479 # No user value, uncomment the following line to provide one.
481 # value_source default
486 # Name of flash device 1 block device
488 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
489 # This option is not active
490 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
491 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
494 # No user value, uncomment the following line to provide one.
495 # user_value "\"/dev/flash1\""
496 # value_source default
497 # Default value: "\"/dev/flash1\""
501 # Start offset from flash base
502 # This gives the offset from the base of flash which this
503 # block device corresponds to.
505 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
506 # This option is not active
507 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
510 # No user value, uncomment the following line to provide one.
511 # user_value 0x00100000
512 # value_source default
513 # Default value: 0x00100000
517 # This gives the length of the region of flash given over
518 # to this block device.
520 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
521 # This option is not active
522 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
525 # No user value, uncomment the following line to provide one.
526 # user_value 0x00100000
527 # value_source default
528 # Default value: 0x00100000
533 # Intel StrataFLASH memory support
534 # FLASH memory device support for Intel StrataFlash
536 cdl_package CYGPKG_DEVS_FLASH_STRATA {
537 # Packages cannot be added or removed, nor can their version be changed,
538 # simply by editing their value. Instead the appropriate configuration
539 # should be used to perform these actions.
541 # ActiveIf constraint: CYGPKG_IO_FLASH
542 # CYGPKG_IO_FLASH == current
544 # ActiveIf constraint: CYGINT_DEVS_FLASH_STRATA_REQUIRED
545 # CYGINT_DEVS_FLASH_STRATA_REQUIRED == 1
548 # This value cannot be modified here.
550 # Current value: 1 current
552 # The following properties are affected by this value
553 # package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON
554 # Requires: CYGPKG_DEVS_FLASH_STRATA
558 # Control Flash driver code copy to RAM
559 # Rarely, it is useful to disable the request that flash driver code
560 # be copied to separate RAM for execution. This option lets you do that.
561 # It should only be controlled by redboot_XXX.ecm config files, for
562 # building different varieties of RedBoot.
563 # NEVER disable this option for ROM startup code, which executes in place
564 # from Flash: the build will not work.
566 cdl_option CYGOPT_DEVS_FLASH_STRATA_NOT_IN_RAM {
568 # No user value, uncomment the following line to provide one.
570 # value_source default
574 # Flash device implements locking
576 cdl_component CYGPKG_DEVS_FLASH_STRATA_LOCKING {
577 # ActiveIf constraint: 0 < CYGHWR_IO_FLASH_BLOCK_LOCKING
578 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 1
581 # Calculated value: 1
587 # TRITON FLASH memory support
589 cdl_package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON {
590 # Packages cannot be added or removed, nor can their version be changed,
591 # simply by editing their value. Instead the appropriate configuration
592 # should be used to perform these actions.
594 # ActiveIf constraint: CYGPKG_IO_FLASH
595 # CYGPKG_IO_FLASH == current
598 # This value cannot be modified here.
600 # Current value: 1 current
601 # Requires: CYGPKG_DEVS_FLASH_STRATA
602 # CYGPKG_DEVS_FLASH_STRATA == current
607 # Generic StrataFLASH driver required
609 cdl_interface CYGINT_DEVS_FLASH_STRATA_REQUIRED {
610 # Implemented by CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON, active, enabled
611 # This value cannot be modified here.
615 # The following properties are affected by this value
616 # package CYGPKG_DEVS_FLASH_STRATA
617 # ActiveIf: CYGINT_DEVS_FLASH_STRATA_REQUIRED
623 # doc: ref/the-ecos-hardware-abstraction-layer.html
624 # The eCos HAL package provide a porting layer for
625 # higher-level parts of the system such as the kernel and the
626 # C library. Each installation should have HAL packages for
627 # one or more architectures, and for each architecture there
628 # may be one or more supported platforms. It is necessary to
629 # select one target architecture and one platform for that
630 # architecture. There are also a number of configuration
631 # options that are common to all HAL packages.
633 cdl_package CYGPKG_HAL {
634 # Packages cannot be added or removed, nor can their version be changed,
635 # simply by editing their value. Instead the appropriate configuration
636 # should be used to perform these actions.
638 # This value cannot be modified here.
640 # Current value: 1 current
641 # Requires: CYGPKG_INFRA
642 # CYGPKG_INFRA == current
645 # The following properties are affected by this value
649 # Platform-independent HAL options
650 # A number of configuration options are common to most or all
651 # HAL packages, for example options controlling how much state
652 # should be saved during a context switch. The implementations
653 # of these options will vary from architecture to architecture.
655 cdl_component CYGPKG_HAL_COMMON {
656 # There is no associated value.
660 # Provide eCos kernel support
661 # The HAL can be configured to either support the full eCos
662 # kernel, or to support only very simple applications which do
663 # not require a full kernel. If kernel support is not required
664 # then some of the startup, exception, and interrupt handling
665 # code can be eliminated.
667 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
669 # No user value, uncomment the following line to provide one.
671 # value_source default
672 # Default value: CYGPKG_KERNEL
673 # CYGPKG_KERNEL (unknown) == 0
675 # Requires: CYGPKG_KERNEL
676 # CYGPKG_KERNEL (unknown) == 0
680 # HAL exception support
681 # When a processor exception occurs, for example an attempt to
682 # execute an illegal instruction or to perform a divide by
683 # zero, this exception may be handled in a number of different
684 # ways. If the target system has gdb support then typically
685 # the exception will be handled by gdb code. Otherwise if the
686 # HAL exception support is enabled then the HAL will invoke a
687 # routine deliver_exception(). Typically this routine will be
688 # provided by the eCos kernel, but it is possible for
689 # application code to provide its own implementation. If the
690 # HAL exception support is not enabled and a processor
691 # exception occurs then the behaviour of the system is
694 cdl_option CYGPKG_HAL_EXCEPTIONS {
696 # No user value, uncomment the following line to provide one.
698 # value_source default
699 # Default value: CYGPKG_KERNEL_EXCEPTIONS
700 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
702 # Requires: CYGPKG_KERNEL_EXCEPTIONS
703 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
707 # Stop calling constructors early
708 # This option supports environments where some constructors
709 # must be run in the context of a thread rather than at
710 # simple system startup time. A boolean flag named
711 # cyg_hal_stop_constructors is set to 1 when constructors
712 # should no longer be invoked. It is up to some other
713 # package to deal with the rest of the constructors.
714 # In the current version this is only possible with the
717 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
719 # No user value, uncomment the following line to provide one.
721 # value_source default
723 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
724 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
728 # HAL uses the MMU and allows for CDL manipulation of it's use
730 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
731 # No options implement this inferface
732 # This value cannot be modified here.
736 # The following properties are affected by this value
737 # option CYGSEM_HAL_INSTALL_MMU_TABLES
738 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
741 # Install MMU tables.
742 # This option controls whether this application installs
743 # its own Memory Management Unit (MMU) tables, or relies on the
744 # existing environment to run.
746 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
747 # This option is not active
748 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
749 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
753 # No user value, uncomment the following line to provide one.
755 # value_source default
756 # Default value: CYG_HAL_STARTUP != "RAM"
757 # CYG_HAL_STARTUP == ROM
760 # The following properties are affected by this value
761 # option CYGSEM_HAL_STATIC_MMU_TABLES
762 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
765 # Use static MMU tables.
766 # This option defines an environment where any Memory
767 # Management Unit (MMU) tables are constant. Normally used by ROM
768 # based environments, this provides a way to save RAM usage which
769 # would otherwise be required for these tables.
771 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
773 # No user value, uncomment the following line to provide one.
775 # value_source default
777 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
778 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
782 # Route diagnostic output to debug channel
783 # If not inheriting the console setup from the ROM monitor,
784 # it is possible to redirect diagnostic output to the debug
785 # channel by enabling this option. Depending on the debugger
786 # used it may also be necessary to select a mangler for the
787 # output to be displayed by the debugger.
789 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
790 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
791 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
793 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
794 # CYGPKG_HAL_ARM == current
795 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
796 # CYGPKG_HAL_V85X_V850 (unknown) == 0
797 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
801 # No user value, uncomment the following line to provide one.
803 # value_source default
804 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
805 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
806 # CYG_HAL_STARTUP == ROM
809 # The following properties are affected by this value
810 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
811 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
815 # Mangler used on diag output
816 # It is sometimes necessary to mangle (encode) the
817 # diag ASCII text output in order for it to show up at the
818 # other end. In particular, GDB may silently ignore raw
821 cdl_option CYGSEM_HAL_DIAG_MANGLER {
823 # No user value, uncomment the following line to provide one.
825 # value_source default
827 # Legal values: "GDB" "None"
832 # HAL interrupt handling
833 # A number of configuration options related to interrupt
834 # handling are common to most or all HAL packages, even though
835 # the implementations will vary from architecture to
838 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
839 # There is no associated value.
843 # Use separate stack for interrupts
844 # When an interrupt occurs this interrupt can be handled either
845 # on the current stack or on a separate stack maintained by the
846 # HAL. Using a separate stack requires a small number of extra
847 # instructions in the interrupt handling code, but it has the
848 # advantage that it is no longer necessary to allow extra space
849 # in every thread stack for the interrupt handlers. The amount
850 # of extra space required depends on the interrupt handlers
851 # that are being used.
853 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
855 # No user value, uncomment the following line to provide one.
857 # value_source default
861 # Interrupt stack size
862 # This configuration option specifies the stack size in bytes
863 # for the interrupt stack. Typically this should be a multiple
864 # of 16, but the exact requirements will vary from architecture
865 # to architecture. The interrupt stack serves two separate
866 # purposes. It is used as the stack during system
867 # initialization. In addition, if the interrupt system is
868 # configured to use a separate stack then all interrupts will
869 # be processed on this stack. The exact memory requirements
870 # will vary from application to application, and will depend
871 # heavily on whether or not other interrupt-related options,
872 # for example nested interrupts, are enabled. On most targets,
873 # in a configuration with no kernel this stack will also be
874 # the stack used to invoke the application, and must obviously
875 # be appropriately large in that case.
877 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
881 # Default value: CYGPKG_KERNEL ? 4096 : 32768
882 # CYGPKG_KERNEL (unknown) == 0
884 # Legal values: 1024 to 1048576
887 # Allow nested interrupts
888 # When an interrupt occurs the HAL interrupt handling code can
889 # either leave interrupts disabled for the duration of the
890 # interrupt handling code, or by doing some extra work it can
891 # reenable interrupts before invoking the interrupt handler and
892 # thus allow nested interrupts to happen. If all the interrupt
893 # handlers being used are small and do not involve any loops
894 # then it is usually better to disallow nested interrupts.
895 # However if any of the interrupt handlers are more complicated
896 # than nested interrupts will usually be required.
898 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
900 # No user value, uncomment the following line to provide one.
902 # value_source default
906 # Save minimum context on interrupt
907 # The HAL interrupt handling code can exploit the calling conventions
908 # defined for a given architecture to reduce the amount of state
909 # that has to be saved. Generally this improves performance and
910 # reduces code size. However it can make source-level debugging
913 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
919 # The following properties are affected by this value
920 # option CYGBLD_BUILD_GDB_STUBS
921 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
922 # component CYGBLD_BUILD_REDBOOT
923 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
926 # Chain all interrupts together
927 # Interrupts can be attached to vectors either singly, or be
928 # chained together. The latter is necessary if there is no way
929 # of discovering which device has interrupted without
930 # inspecting the device itself. It can also reduce the amount
931 # of RAM needed for interrupt decoding tables and code.
933 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
935 # No user value, uncomment the following line to provide one.
937 # value_source default
941 # Ignore spurious [fleeting] interrupts
942 # On some hardware, interrupt sources may not be de-bounced or
943 # de-glitched. Rather than try to handle these interrupts (no
944 # handling may be possible), this option allows the HAL to simply
945 # ignore them. In most cases, if the interrupt is real it will
946 # reoccur in a detectable form.
948 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
950 # No user value, uncomment the following line to provide one.
952 # value_source default
957 # HAL context switch support
958 # A number of configuration options related to thread contexts
959 # are common to most or all HAL packages, even though the
960 # implementations will vary from architecture to architecture.
962 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
963 # There is no associated value.
965 # The following properties are affected by this value
969 # Use minimum thread context
970 # The thread context switch code can exploit the calling
971 # conventions defined for a given architecture to reduce the
972 # amount of state that has to be saved during a context
973 # switch. Generally this improves performance and reduces
974 # code size. However it can make source-level debugging more
977 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
979 # No user value, uncomment the following line to provide one.
981 # The inferred value should not be edited directly.
983 # value_source inferred
986 # The following properties are affected by this value
987 # option CYGBLD_BUILD_GDB_STUBS
988 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
989 # component CYGBLD_BUILD_REDBOOT
990 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
994 # Explicit control over cache behaviour
995 # These options let the default behaviour of the caches
996 # be easily configurable.
998 cdl_component CYGPKG_HAL_CACHE_CONTROL {
999 # There is no associated value.
1003 # Enable DATA cache on startup
1004 # Enabling this option will cause the data cache to be enabled
1005 # as soon as practicable when eCos starts up. One would choose
1006 # to disable this if the data cache cannot safely be turned on,
1007 # such as a case where the cache(s) require additional platform
1010 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1012 # No user value, uncomment the following line to provide one.
1014 # value_source default
1019 # DATA cache mode on startup
1020 # This option controls the mode the cache will be set to
1021 # when enabled on startup.
1023 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1025 # No user value, uncomment the following line to provide one.
1026 # user_value COPYBACK
1027 # value_source default
1028 # Default value: COPYBACK
1029 # Legal values: "COPYBACK" "WRITETHRU"
1033 # Enable INSTRUCTION cache on startup
1034 # Enabling this option will cause the instruction cache to be enabled
1035 # as soon as practicable when eCos starts up. One would choose
1036 # to disable this if the instruction cache cannot safely be turned on,
1037 # such as a case where the cache(s) require additional platform
1040 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1042 # No user value, uncomment the following line to provide one.
1044 # value_source default
1049 # Source-level debugging support
1050 # If the source level debugger gdb is to be used for debugging
1051 # application code then it may be necessary to configure in support
1052 # for this in the HAL.
1054 cdl_component CYGPKG_HAL_DEBUG {
1055 # There is no associated value.
1059 # Support for GDB stubs
1060 # The HAL implements GDB stubs for the target.
1062 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1063 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_X, active, enabled
1064 # This value cannot be modified here.
1068 # The following properties are affected by this value
1069 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1070 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1071 # component CYGBLD_BUILD_REDBOOT
1072 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1073 # component CYGBLD_BUILD_REDBOOT
1074 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1077 # Include GDB stubs in HAL
1078 # This option causes a set of GDB stubs to be included into the
1079 # system. On some target systems the GDB support will be
1080 # provided by other means, for example by a ROM monitor. On
1081 # other targets, especially when building a ROM-booting system,
1082 # the necessary support has to go into the target library
1083 # itself. When GDB stubs are include in a configuration, HAL
1084 # serial drivers must also be included.
1086 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1087 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1088 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1092 # No user value, uncomment the following line to provide one.
1094 # The inferred value should not be edited directly.
1096 # value_source inferred
1098 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1099 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1101 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1102 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1103 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1106 # The following properties are affected by this value
1107 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1108 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1109 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1110 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1111 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1112 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1113 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1114 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1115 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1116 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1117 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1118 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1119 # option CYGBLD_BUILD_COMMON_GDB_STUBS
1120 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1121 # option CYGPKG_HAL_GDB_FILEIO
1122 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1123 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
1124 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1125 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
1126 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1127 # option CYGBLD_BUILD_GDB_STUBS
1128 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1129 # component CYGBLD_BUILD_REDBOOT
1130 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1133 # Support for external break support in GDB stubs
1134 # The HAL implements external break (or asynchronous interrupt)
1135 # in the GDB stubs for the target.
1137 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
1138 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_X, active, enabled
1139 # This value cannot be modified here.
1143 # The following properties are affected by this value
1144 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1145 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
1148 # Include GDB external break support for stubs
1149 # This option causes the GDB stub to add a serial interrupt handler
1150 # which will listen for GDB break packets. This lets you stop the
1151 # target asynchronously when using GDB, usually by hitting Control+C
1152 # or pressing the STOP button. This option differs from
1153 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
1154 # GDB stubs are present.
1156 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
1157 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
1158 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
1162 # No user value, uncomment the following line to provide one.
1164 # value_source default
1165 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1166 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1168 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1169 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1172 # The following properties are affected by this value
1173 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1174 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1175 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
1176 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1177 # option CYGBLD_BUILD_GDB_STUBS
1178 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1179 # component CYGBLD_BUILD_REDBOOT
1180 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1183 # Platform does not support CTRLC
1185 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
1186 # No options implement this inferface
1187 # This value cannot be modified here.
1191 # The following properties are affected by this value
1192 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1193 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1196 # Include GDB external break support when no stubs
1197 # This option adds an interrupt handler for the GDB serial line
1198 # which will listen for GDB break packets. This lets you stop the
1199 # target asynchronously when using GDB, usually by hitting Control+C
1200 # or pressing the STOP button. This option differs from
1201 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
1202 # stubs are NOT present.
1204 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
1205 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1206 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1207 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1209 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1210 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1214 # No user value, uncomment the following line to provide one.
1216 # value_source default
1217 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1218 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1220 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1221 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
1224 # The following properties are affected by this value
1225 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
1226 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1227 # component CYGBLD_BUILD_REDBOOT
1228 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1231 # Include GDB multi-threading debug support
1232 # This option enables some extra HAL code which is needed
1233 # to support multi-threaded source level debugging.
1235 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
1236 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
1237 # CYGSEM_HAL_ROM_MONITOR == 1
1238 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
1242 # No user value, uncomment the following line to provide one.
1244 # value_source default
1247 # The following properties are affected by this value
1248 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
1249 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1250 # option CYGBLD_BUILD_GDB_STUBS
1251 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1252 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
1253 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1256 # Number of times to retry sending a $O packet
1257 # This option controls the number of attempts that eCos programs
1258 # will make to send a $O packet to a host GDB process. If it is
1259 # set non-zero, then the target process will attempt to resend the
1260 # $O packet data up to this number of retries. Caution: use of
1261 # this option is not recommended as it can thoroughly confuse the
1264 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
1266 # No user value, uncomment the following line to provide one.
1268 # value_source default
1272 # Timeout period for GDB packets
1273 # This option controls the time (in milliseconds) that eCos programs
1274 # will wait for a response when sending packets to a host GDB process.
1275 # If this time elapses, then the packet will be resent, up to some
1276 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
1278 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
1280 # No user value, uncomment the following line to provide one.
1282 # value_source default
1283 # Default value: 500
1287 # ROM monitor support
1288 # Support for ROM monitors can be built in to your application.
1289 # It may also be relevant to build your application as a ROM monitor
1290 # itself. Such options are contained here if relevant for your chosen
1291 # platform. The options and ROM monitors available to choose are
1292 # platform-dependent.
1294 cdl_component CYGPKG_HAL_ROM_MONITOR {
1295 # There is no associated value.
1297 # The following properties are affected by this value
1301 # Target has virtual vector support
1303 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
1304 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_X, active, enabled
1305 # This value cannot be modified here.
1309 # The following properties are affected by this value
1310 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
1311 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
1314 # Target supports baud rate control via vectors
1315 # Whether this target supports the __COMMCTL_GETBAUD
1316 # and __COMMCTL_SETBAUD virtual vector comm control operations.
1318 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
1319 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_X, active, enabled
1320 # This value cannot be modified here.
1324 # The following properties are affected by this value
1325 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
1326 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
1329 # Enable use of virtual vector calling interface
1330 # Virtual vector support allows the HAL to let the ROM
1331 # monitor handle certain operations. The virtual vector table
1332 # defines a calling interface between applications running in
1333 # RAM and the ROM monitor.
1335 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
1336 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
1337 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
1340 # Calculated value: 1
1344 # The following properties are affected by this value
1345 # component CYGBLD_BUILD_REDBOOT
1346 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
1350 # Inherit console settings from ROM monitor
1351 # When this option is set, the application will inherit
1352 # the console as set up by the ROM monitor. This means
1353 # that the application will use whatever channel and
1354 # mangling style was used by the ROM monitor when
1355 # the application was launched.
1357 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
1358 # This option is not active
1359 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
1360 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1364 # No user value, uncomment the following line to provide one.
1366 # value_source default
1367 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1368 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1371 # The following properties are affected by this value
1372 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1373 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1374 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1375 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1378 # Debug channel is configurable
1379 # This option is a configuration hint - it is enabled
1380 # when the HAL initialization code will make use
1381 # of the debug channel configuration option.
1383 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
1384 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1385 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1390 # Console channel is configurable
1391 # This option is a configuration hint - it is enabled
1392 # when the HAL initialization code will make use
1393 # of the console channel configuration option.
1395 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
1396 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1397 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1398 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 1
1403 # Initialize whole of virtual vector table
1404 # This option will cause the whole of the virtual
1405 # vector table to be initialized with dummy values on
1406 # startup. When this option is enabled, all the
1407 # options below must also be enabled - or the
1408 # table would be empty when the application
1410 # On targets where older ROM monitors without
1411 # virtual vector support may still be in use, it is
1412 # necessary for RAM applictions to initialize the
1413 # table (since all HAL diagnostics and debug IO
1414 # happens via the table).
1416 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
1420 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
1421 # CYG_HAL_STARTUP == ROM
1422 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1424 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
1425 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
1427 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
1428 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
1430 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
1431 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
1433 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
1434 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
1436 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1437 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1440 # The following properties are affected by this value
1441 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1442 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1443 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
1444 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1445 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
1446 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1447 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
1448 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1449 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
1450 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1451 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
1452 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1453 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1454 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1457 # Claim virtual vector table entries by default
1458 # By default most virtual vectors will be claimed by
1459 # RAM startup configurations, meaning that the RAM
1460 # application will provide the services. The
1461 # exception is COMMS support (HAL
1462 # diagnostics/debugging IO) which is left in the
1463 # control of the ROM monitor.
1464 # The reasoning behind this is to get as much of the
1465 # code exercised during regular development so it
1466 # is known to be working the few times a new ROM
1467 # monitor or a ROM production configuration is used
1468 # - COMMS are excluded only by necessity in order to
1469 # avoid breaking an existing debugger connections
1470 # (there may be ways around this).
1471 # For production RAM configurations this option can
1472 # be switched off, causing the appliction to rely on
1473 # the ROM monitor for these services, thus
1474 # saving some space.
1475 # Individual vectors may also be left unclaimed,
1476 # controlled by the below options (meaning that the
1477 # associated service provided by the ROM monitor
1480 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
1481 # This option is not active
1482 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1483 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1487 # No user value, uncomment the following line to provide one.
1489 # value_source default
1492 # The following properties are affected by this value
1493 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
1494 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1495 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
1496 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1497 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
1498 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1499 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
1500 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1503 # Claim reset virtual vectors
1504 # This option will cause the reset and kill_by_reset
1505 # virtual vectors to be claimed.
1507 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
1511 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1512 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1513 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
1516 # The following properties are affected by this value
1517 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1518 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
1521 # Claim version virtual vectors
1522 # This option will cause the version
1523 # virtual vectors to be claimed.
1525 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
1529 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1530 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1534 # Claim delay_us virtual vector
1535 # This option will cause the delay_us
1536 # virtual vector to be claimed.
1538 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
1542 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1543 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1544 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
1547 # The following properties are affected by this value
1548 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1549 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
1552 # Claim cache virtual vectors
1553 # This option will cause the cache virtual vectors
1556 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
1560 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1561 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1562 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
1565 # The following properties are affected by this value
1566 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1567 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
1570 # Claim data virtual vectors
1571 # This option will cause the data virtual vectors
1572 # to be claimed. At present there is only one, used
1573 # by the RedBoot ethernet driver to share diag output.
1575 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
1579 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1580 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1581 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
1584 # The following properties are affected by this value
1585 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1586 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
1589 # Claim comms virtual vectors
1590 # This option will cause the communication tables
1591 # that are part of the virtual vectors mechanism to
1592 # be claimed. Note that doing this may cause an
1593 # existing ROM monitor communication connection to
1594 # be closed. For this reason, the option is disabled
1595 # per default for normal application
1598 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
1602 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1603 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1604 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1607 # The following properties are affected by this value
1608 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1609 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1610 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1611 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1612 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
1613 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1614 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1615 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1618 # Do diagnostic IO via virtual vector table
1619 # All HAL IO happens via the virtual vector table / comm
1620 # tables when those tables are supported by the HAL.
1621 # If so desired, the low-level IO functions can
1622 # still be provided by the RAM application by
1623 # enabling the CLAIM_COMMS option.
1625 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
1626 # Calculated value: 1
1630 # The following properties are affected by this value
1631 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1632 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1633 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1634 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1638 # Behave as a ROM monitor
1639 # Enable this option if this program is to be used as a ROM monitor,
1640 # i.e. applications will be loaded into RAM on the board, and this
1641 # ROM monitor may process exceptions or interrupts generated from the
1642 # application. This enables features such as utilizing a separate
1643 # interrupt stack when exceptions are generated.
1645 cdl_option CYGSEM_HAL_ROM_MONITOR {
1650 # Requires: CYG_HAL_STARTUP == "ROM"
1651 # CYG_HAL_STARTUP == ROM
1654 # The following properties are affected by this value
1655 # option CYGBLD_BUILD_GDB_STUBS
1656 # Requires: CYGSEM_HAL_ROM_MONITOR
1657 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
1658 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
1659 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1660 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
1661 # option CYGPRI_REDBOOT_ROM_MONITOR
1662 # Requires: CYGSEM_HAL_ROM_MONITOR
1665 # Work with a ROM monitor
1666 # Support can be enabled for different varieties of ROM monitor.
1667 # This support changes various eCos semantics such as the encoding
1668 # of diagnostic output, or the overriding of hardware interrupt
1670 # Firstly there is "Generic" support which prevents the HAL
1671 # from overriding the hardware vectors that it does not use, to
1672 # instead allow an installed ROM monitor to handle them. This is
1673 # the most basic support which is likely to be common to most
1674 # implementations of ROM monitor.
1675 # "GDB_stubs" provides support when GDB stubs are included in
1676 # the ROM monitor or boot ROM.
1678 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
1682 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
1683 # CYG_HAL_STARTUP == ROM
1685 # Legal values: "Generic" "GDB_stubs"
1686 # Requires: CYG_HAL_STARTUP == "RAM"
1687 # CYG_HAL_STARTUP == ROM
1690 # The following properties are affected by this value
1691 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1692 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1693 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1694 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1695 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1696 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
1697 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1698 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
1702 # Platform defined I/O channels.
1703 # Platforms which provide additional I/O channels can implement
1704 # this interface, indicating that the function plf_if_init()
1705 # needs to be called.
1707 cdl_interface CYGINT_HAL_PLF_IF_INIT {
1708 # No options implement this inferface
1709 # This value cannot be modified here.
1714 # Platform IDE I/O support.
1715 # Platforms which provide IDE controllers can implement
1716 # this interface, indicating that IDE I/O macros are
1719 cdl_interface CYGINT_HAL_PLF_IF_IDE {
1720 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_X, active, enabled
1721 # This value cannot be modified here.
1725 # The following properties are affected by this value
1726 # component CYGPKG_REDBOOT_DISK
1727 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
1730 # File I/O operations via GDB
1731 # This option enables support for various file I/O
1732 # operations using the GDB remote protocol to communicate
1733 # with GDB. The operations are then performed on the
1734 # debugging host by proxy. These operations are only
1735 # currently available by using a system call interface
1736 # to RedBoot. This may change in the future.
1738 cdl_option CYGPKG_HAL_GDB_FILEIO {
1739 # This option is not active
1740 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
1741 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
1745 # No user value, uncomment the following line to provide one.
1747 # value_source default
1749 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1750 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1754 # Build Compiler sanity checking tests
1755 # Enabling this option causes compiler tests to be built.
1757 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
1759 # No user value, uncomment the following line to provide one.
1761 # value_source default
1764 # The following properties are affected by this value
1765 # component CYGPKG_HAL_TESTS
1766 # Calculated: "tests/context tests/basic"
1767 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
1768 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
1769 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
1773 # This option specifies the set of tests for the common HAL.
1775 cdl_component CYGPKG_HAL_TESTS {
1776 # Calculated value: "tests/context tests/basic"
1777 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
1778 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
1779 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
1780 # CYGINT_HAL_TESTS_NO_CACHES == 0
1781 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
1782 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
1784 # Current_value: tests/context tests/basic tests/cache tests/intr
1788 # Interface for cache presence
1789 # Some architectures and/or platforms do not have caches. By
1790 # implementing this interface, these can disable the various
1791 # cache-related tests.
1793 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
1794 # No options implement this inferface
1795 # This value cannot be modified here.
1797 # Current value: 0 0
1799 # The following properties are affected by this value
1800 # component CYGPKG_HAL_TESTS
1801 # Calculated: "tests/context tests/basic"
1802 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
1803 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
1804 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
1809 # The ARM architecture HAL package provides generic
1810 # support for this processor architecture. It is also
1811 # necessary to select a specific target platform HAL
1814 cdl_package CYGPKG_HAL_ARM {
1815 # Packages cannot be added or removed, nor can their version be changed,
1816 # simply by editing their value. Instead the appropriate configuration
1817 # should be used to perform these actions.
1819 # This value cannot be modified here.
1821 # Current value: 1 current
1823 # The following properties are affected by this value
1824 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1825 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1826 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
1827 # ActiveIf: CYGPKG_HAL_ARM
1831 # The CPU architecture supports THUMB mode
1833 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
1834 # No options implement this inferface
1835 # This value cannot be modified here.
1839 # The following properties are affected by this value
1840 # option CYGHWR_THUMB
1841 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
1842 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
1843 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
1846 # Enable Thumb instruction set
1847 # Enable use of the Thumb instruction set.
1849 cdl_option CYGHWR_THUMB {
1850 # This option is not active
1851 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
1852 # CYGINT_HAL_ARM_THUMB_ARCH == 0
1856 # No user value, uncomment the following line to provide one.
1858 # value_source default
1861 # The following properties are affected by this value
1862 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
1863 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
1866 # Enable Thumb interworking compiler option
1867 # This option controls the use of -mthumb-interwork in the
1868 # compiler flags. It defaults enabled in Thumb or ROM monitor
1869 # configurations, but can be overridden for reduced memory
1870 # footprint where interworking is not a requirement.
1872 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
1873 # This option is not active
1874 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
1875 # CYGINT_HAL_ARM_THUMB_ARCH == 0
1881 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
1883 # CYGSEM_HAL_ROM_MONITOR == 1
1887 # The platform and architecture supports Big Endian operation
1889 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
1890 # No options implement this inferface
1891 # This value cannot be modified here.
1895 # The following properties are affected by this value
1896 # option CYGHWR_HAL_ARM_BIGENDIAN
1897 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
1900 # Use big-endian mode
1901 # Use the CPU in big-endian mode.
1903 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
1904 # This option is not active
1905 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
1906 # CYGINT_HAL_ARM_BIGENDIAN == 0
1910 # No user value, uncomment the following line to provide one.
1912 # value_source default
1916 # The platform uses a processor with an ARM7 core
1918 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
1919 # No options implement this inferface
1920 # This value cannot be modified here.
1924 # The following properties are affected by this value
1925 # option CYGHWR_HAL_ARM_CPU_FAMILY
1926 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
1927 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
1928 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
1929 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
1931 # option CYGHWR_HAL_ARM_CPU_FAMILY
1932 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
1933 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
1934 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
1935 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
1939 # The platform uses a processor with an ARM9 core
1941 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
1942 # No options implement this inferface
1943 # This value cannot be modified here.
1947 # The following properties are affected by this value
1948 # option CYGHWR_HAL_ARM_CPU_FAMILY
1949 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
1950 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
1951 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
1952 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
1954 # option CYGHWR_HAL_ARM_CPU_FAMILY
1955 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
1956 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
1957 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
1958 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
1962 # The platform uses a processor with a StrongARM core
1964 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
1965 # No options implement this inferface
1966 # This value cannot be modified here.
1970 # The following properties are affected by this value
1971 # option CYGHWR_HAL_ARM_CPU_FAMILY
1972 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
1973 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
1974 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
1975 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
1977 # option CYGHWR_HAL_ARM_CPU_FAMILY
1978 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
1979 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
1980 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
1981 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
1985 # The platform uses a processor with a XScale core
1987 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
1988 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_X, active, enabled
1989 # This value cannot be modified here.
1993 # The following properties are affected by this value
1994 # option CYGHWR_HAL_ARM_CPU_FAMILY
1995 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
1996 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
1997 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
1998 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2000 # option CYGHWR_HAL_ARM_CPU_FAMILY
2001 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2002 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2003 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2004 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2009 # It is possible to optimize code for different
2010 # ARM CPU families. This option selects which CPU to
2011 # optimize for on boards that support multiple CPU types.
2013 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2015 # No user value, uncomment the following line to provide one.
2017 # value_source default
2018 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2019 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2020 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2021 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2023 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2024 # CYGINT_HAL_ARM_ARCH_ARM9 == 0
2025 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2026 # CYGINT_HAL_ARM_ARCH_XSCALE == 1
2028 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2029 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2030 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2031 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2033 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2034 # CYGINT_HAL_ARM_ARCH_ARM9 == 0
2035 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2036 # CYGINT_HAL_ARM_ARCH_XSCALE == 1
2039 # Provide diagnostic dump for exceptions
2040 # Print messages about hardware exceptions, including
2041 # raw exception frame dump and register contents.
2043 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2045 # No user value, uncomment the following line to provide one.
2047 # value_source default
2049 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2050 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2054 # Process all exceptions with the eCos application
2055 # Normal RAM-based programs which do not include GDB stubs
2056 # defer processing of the illegal instruction exception to GDB.
2057 # Setting this options allows the program to explicitly handle
2058 # the illegal instruction exception itself. Note: this will
2059 # prevent the use of GDB to debug the application as breakpoints
2060 # will no longer work.
2062 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
2064 # No user value, uncomment the following line to provide one.
2066 # value_source default
2070 # Support GDB thread operations via ICE/Multi-ICE
2071 # Allow GDB to get thread information via the ICE/Multi-ICE
2074 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
2076 # No user value, uncomment the following line to provide one.
2078 # value_source default
2080 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2081 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2083 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2084 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
2086 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2087 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2091 # Support for 'gprof' callbacks
2092 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
2093 # to acquire the interrupt-context PC and SP, when this option is
2096 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
2097 # This option is not active
2098 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2099 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2101 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2102 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
2103 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
2106 # Calculated value: 1
2113 cdl_option CYGBLD_LINKER_SCRIPT {
2114 # Calculated value: "src/arm.ld"
2116 # Current_value: src/arm.ld
2119 # Implementations of hal_arm_mem_real_region_top()
2121 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
2122 # No options implement this inferface
2123 # This value cannot be modified here.
2128 # Karo Triton XScale evaluation boards
2129 # The TRITON_X HAL package provides the support needed to run
2130 # eCos on a Karo TRITON X board.
2132 cdl_package CYGPKG_HAL_ARM_XSCALE_TRITON_X {
2133 # Packages cannot be added or removed, nor can their version be changed,
2134 # simply by editing their value. Instead the appropriate configuration
2135 # should be used to perform these actions.
2137 # This value cannot be modified here.
2139 # Current value: 1 current
2144 # When targetting the KARO TRITON eval board it is possible to build
2145 # the system for either RAM bootstrap or ROM bootstrap(s). Select
2146 # 'ram' when building programs to load into RAM using onboard
2147 # debug software such as Angel or eCos GDB stubs. Select 'rom'
2148 # when building a stand-alone application which will be put
2149 # into ROM. Selection of 'stubs' is for the special case of
2150 # building the eCos GDB stubs themselves.
2152 cdl_component CYG_HAL_STARTUP {
2156 # Default value: RAM
2157 # Legal values: "RAM" "ROM"
2159 # The following properties are affected by this value
2160 # option CYGBLD_BUILD_GDB_STUBS
2161 # Requires: CYG_HAL_STARTUP == "ROM"
2162 # component CYGHWR_MEMORY_LAYOUT
2163 # Calculated: CYG_HAL_STARTUP == "RAM" ? "arm_xscale_triton_ram" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "arm_xscale_triton_roma" : "arm_xscale_triton_rom"
2164 # option CYGHWR_MEMORY_LAYOUT_LDI
2165 # Calculated: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_stk_ram.ldi>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_stk_roma.ldi>" : "<pkgconf/mlt_arm_xscale_triton_stk_rom.ldi>"
2166 # option CYGHWR_MEMORY_LAYOUT_H
2167 # Calculated: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_stk_ram.h>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_stk_roma.h>" : "<pkgconf/mlt_arm_xscale_triton_stk_rom.h>"
2168 # option CYGSEM_HAL_ROM_MONITOR
2169 # Requires: CYG_HAL_STARTUP == "ROM"
2170 # option CYGSEM_HAL_USE_ROM_MONITOR
2171 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2172 # option CYGSEM_HAL_USE_ROM_MONITOR
2173 # Requires: CYG_HAL_STARTUP == "RAM"
2174 # option CYGSEM_HAL_INSTALL_MMU_TABLES
2175 # DefaultValue: CYG_HAL_STARTUP != "RAM"
2176 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2177 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2178 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2179 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2180 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2181 # ActiveIf: CYG_HAL_STARTUP != "RAM"
2182 # option CYGPRI_REDBOOT_ROM_MONITOR
2183 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2184 # option CYGPRI_REDBOOT_ROM_MONITOR
2185 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2188 # Coexist with ARM bootloader
2189 # Enable this option if the ARM bootloader is programmed into
2190 # the FLASH boot sector on the board.
2192 cdl_option CYGSEM_HAL_ARM__XSCALE_TRITON_ARMBOOT {
2194 # No user value, uncomment the following line to provide one.
2196 # value_source default
2200 # Default console channel.
2202 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
2207 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2208 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
2211 # Number of communication channels on the board
2213 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
2214 # Calculated value: 3
2218 # The following properties are affected by this value
2219 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
2220 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2221 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2222 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2223 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2224 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2228 # This option chooses which port will be used to connect to a host
2231 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
2236 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2237 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
2240 # Diagnostic serial port
2241 # The TRITON board has only one serial port. This option
2242 # chooses which port will be used for diagnostic output.
2244 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
2249 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2250 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
2253 # Diagnostic serial port baud rate
2254 # This option selects the baud rate used for the diagnostic port.
2255 # Note: this should match the value chosen for the GDB port if the
2256 # diagnostic and GDB port are the same.
2258 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
2260 # No user value, uncomment the following line to provide one.
2262 # value_source default
2263 # Default value: 38400
2264 # Legal values: 9600 19200 38400 57600 115200
2267 # GDB serial port baud rate
2268 # This option selects the baud rate used for the GDB port.
2270 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
2272 # No user value, uncomment the following line to provide one.
2274 # value_source default
2275 # Default value: 38400
2276 # Legal values: 9600 19200 38400 57600 115200
2279 # Real-time clock constants
2281 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
2282 # There is no associated value.
2286 # Real-time clock numerator
2288 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
2289 # Calculated value: 1000000000
2291 # Current_value: 1000000000
2294 # Real-time clock denominator
2296 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
2297 # Calculated value: 100
2299 # Current_value: 100
2302 # Real-time clock period
2304 cdl_option CYGNUM_HAL_RTC_PERIOD {
2305 # Calculated value: 330000
2307 # Current_value: 330000
2311 # XScale TRITON build options
2312 # Package specific build options including control over
2313 # compiler flags used only in building this package,
2314 # and details of which tests are built.
2316 cdl_component CYGPKG_HAL_ARM_XSCALE_TRITON_OPTIONS {
2317 # There is no associated value.
2321 # Additional compiler flags
2322 # This option modifies the set of compiler flags for
2323 # building the XScale TRITON HAL. These flags are used
2324 # in addition to the set of global flags.
2326 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_CFLAGS_ADD {
2328 # No user value, uncomment the following line to provide one.
2330 # value_source default
2334 # Suppressed compiler flags
2335 # This option modifies the set of compiler flags for
2336 # building the XScale TRITON HAL. These flags are
2337 # removed from the set of global flags if present.
2339 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_CFLAGS_REMOVE {
2341 # No user value, uncomment the following line to provide one.
2343 # value_source default
2347 # XScale TRITON tests
2348 # This option specifies the set of tests for the XScale TRITON HAL.
2350 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_TESTS {
2351 # Calculated value: ""
2359 cdl_component CYGHWR_MEMORY_LAYOUT {
2360 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "arm_xscale_triton_ram" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "arm_xscale_triton_roma" : "arm_xscale_triton_rom"
2361 # CYG_HAL_STARTUP == ROM
2362 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2364 # Current_value: arm_xscale_triton_rom
2368 # Memory layout linker script fragment
2370 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
2371 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_stk_ram.ldi>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_stk_roma.ldi>" : "<pkgconf/mlt_arm_xscale_triton_stk_rom.ldi>"
2372 # CYG_HAL_STARTUP == ROM
2373 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2375 # Current_value: <pkgconf/mlt_arm_xscale_triton_stk_rom.ldi>
2378 # Memory layout header file
2380 cdl_option CYGHWR_MEMORY_LAYOUT_H {
2381 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_stk_ram.h>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_stk_roma.h>" : "<pkgconf/mlt_arm_xscale_triton_stk_rom.h>"
2382 # CYG_HAL_STARTUP == ROM
2383 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2385 # Current_value: <pkgconf/mlt_arm_xscale_triton_stk_rom.h>
2393 # Common types and useful macros.
2394 # Tracing and assertion facilities.
2395 # Package startup options.
2397 cdl_package CYGPKG_INFRA {
2398 # Packages cannot be added or removed, nor can their version be changed,
2399 # simply by editing their value. Instead the appropriate configuration
2400 # should be used to perform these actions.
2402 # This value cannot be modified here.
2404 # Current value: 1 current
2406 # The following properties are affected by this value
2407 # package CYGPKG_HAL
2408 # Requires: CYGPKG_INFRA
2409 # component CYGBLD_BUILD_REDBOOT
2410 # Requires: CYGPKG_INFRA
2415 # The eCos source code contains a significant amount of
2416 # internal debugging support, in the form of assertions and
2418 # Assertions check at runtime that various conditions are as
2419 # expected; if not, execution is halted.
2420 # Tracing takes the form of text messages that are output
2421 # whenever certain events occur, or whenever functions are
2423 # The most important property of these checks and messages is
2424 # that they are not required for the program to run.
2425 # It is prudent to develop software with assertions enabled,
2426 # but disable them when making a product release, thus
2427 # removing the overhead of that checking.
2428 # It is possible to enable assertions and tracing
2430 # There are also options controlling the exact behaviour of
2431 # the assertion and tracing facilities, thus giving users
2432 # finer control over the code and data size requirements.
2434 cdl_component CYGPKG_INFRA_DEBUG {
2436 # No user value, uncomment the following line to provide one.
2438 # value_source default
2444 # If this option is defined, asserts in the code are tested.
2445 # Assert functions (CYG_ASSERT()) are defined in
2446 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
2447 # If it is not defined, these result in no additional
2448 # object code and no checking of the asserted conditions.
2450 cdl_component CYGDBG_USE_ASSERTS {
2451 # This option is not active
2452 # The parent CYGPKG_INFRA_DEBUG is disabled
2455 # No user value, uncomment the following line to provide one.
2457 # value_source default
2459 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
2460 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
2466 # This option allows individual control of preconditions.
2467 # A precondition is one type of assert, which it is
2468 # useful to control separately from more general asserts.
2469 # The function is CYG_PRECONDITION(condition,msg).
2471 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
2472 # This option is not active
2473 # The parent CYGDBG_USE_ASSERTS is not active
2476 # No user value, uncomment the following line to provide one.
2478 # value_source default
2483 # This option allows individual control of postconditions.
2484 # A postcondition is one type of assert, which it is
2485 # useful to control separately from more general asserts.
2486 # The function is CYG_POSTCONDITION(condition,msg).
2488 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
2489 # This option is not active
2490 # The parent CYGDBG_USE_ASSERTS is not active
2493 # No user value, uncomment the following line to provide one.
2495 # value_source default
2500 # This option allows individual control of loop invariants.
2501 # A loop invariant is one type of assert, which it is
2502 # useful to control separately from more general asserts,
2503 # particularly since a loop invariant is typically evaluated
2504 # a great many times when used correctly.
2505 # The function is CYG_LOOP_INVARIANT(condition,msg).
2507 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
2508 # This option is not active
2509 # The parent CYGDBG_USE_ASSERTS is not active
2512 # No user value, uncomment the following line to provide one.
2514 # value_source default
2519 # All assertions within eCos contain a text message
2520 # which should give some information about the condition
2522 # These text messages will end up being embedded in the
2523 # application image and hence there is a significant penalty
2524 # in terms of image size.
2525 # It is possible to suppress the use of these messages by
2526 # disabling this option.
2527 # This results in smaller code size, but there is less
2528 # human-readable information if an assertion actually gets
2531 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
2532 # This option is not active
2533 # The parent CYGDBG_USE_ASSERTS is not active
2536 # No user value, uncomment the following line to provide one.
2538 # value_source default
2544 # If this option is defined, tracing operations
2545 # result in output or logging, depending on other options.
2546 # This may have adverse effects on performance, if the time
2547 # taken to output message overwhelms the available CPU
2548 # power or output bandwidth.
2549 # Trace functions (CYG_TRACE()) are defined in
2550 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
2551 # If it is not defined, these result in no additional
2552 # object code and no trace information.
2554 cdl_component CYGDBG_USE_TRACING {
2555 # This option is not active
2556 # The parent CYGPKG_INFRA_DEBUG is disabled
2559 # No user value, uncomment the following line to provide one.
2561 # value_source default
2563 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
2564 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
2567 # The following properties are affected by this value
2568 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
2569 # ActiveIf: CYGDBG_USE_TRACING
2570 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
2571 # ActiveIf: CYGDBG_USE_TRACING
2572 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
2573 # ActiveIf: CYGDBG_USE_TRACING
2574 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
2575 # ActiveIf: CYGDBG_USE_TRACING
2576 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
2577 # ActiveIf: CYGDBG_USE_TRACING
2581 # Trace function reports
2582 # This option allows individual control of
2583 # function entry/exit tracing, independent of
2584 # more general tracing output.
2585 # This may be useful to remove clutter from a
2588 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
2589 # This option is not active
2590 # The parent CYGDBG_USE_TRACING is not active
2591 # The parent CYGDBG_USE_TRACING is disabled
2594 # No user value, uncomment the following line to provide one.
2596 # value_source default
2601 # All trace calls within eCos contain a text message
2602 # which should give some information about the circumstances.
2603 # These text messages will end up being embedded in the
2604 # application image and hence there is a significant penalty
2605 # in terms of image size.
2606 # It is possible to suppress the use of these messages by
2607 # disabling this option.
2608 # This results in smaller code size, but there is less
2609 # human-readable information available in the trace output,
2610 # possibly only filenames and line numbers.
2612 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
2613 # This option is not active
2614 # The parent CYGDBG_USE_TRACING is not active
2615 # The parent CYGDBG_USE_TRACING is disabled
2618 # No user value, uncomment the following line to provide one.
2620 # value_source default
2625 # Trace output implementations
2627 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
2628 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
2629 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
2630 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
2631 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
2632 # This option is not active
2633 # The parent CYGPKG_INFRA_DEBUG is disabled
2635 # This value cannot be modified here.
2639 # The following properties are affected by this value
2640 # component CYGDBG_USE_ASSERTS
2641 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
2642 # component CYGDBG_USE_TRACING
2643 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
2647 # A null output module which is useful when
2648 # debugging interactively; the output routines
2649 # can be breakpointed rather than have them actually
2650 # 'print' something.
2652 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
2653 # This option is not active
2654 # The parent CYGPKG_INFRA_DEBUG is disabled
2657 # No user value, uncomment the following line to provide one.
2659 # value_source default
2664 # An output module which produces simple output
2665 # from tracing and assertion events.
2667 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
2668 # This option is not active
2669 # The parent CYGPKG_INFRA_DEBUG is disabled
2672 # No user value, uncomment the following line to provide one.
2674 # value_source default
2679 # An output module which produces fancy output
2680 # from tracing and assertion events.
2682 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
2683 # This option is not active
2684 # The parent CYGPKG_INFRA_DEBUG is disabled
2687 # No user value, uncomment the following line to provide one.
2689 # value_source default
2694 # An output module which buffers output
2695 # from tracing and assertion events. The stored
2696 # messages are output when an assert fires, or
2697 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
2699 # Of course, there will only be stored messages
2700 # if tracing per se (CYGDBG_USE_TRACING)
2703 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
2704 # This option is not active
2705 # The parent CYGPKG_INFRA_DEBUG is disabled
2708 # No user value, uncomment the following line to provide one.
2710 # value_source default
2716 # The size of the trace buffer. This counts the number
2717 # of trace records stored. When the buffer fills it
2718 # either wraps, stops recording, or generates output.
2720 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
2721 # This option is not active
2722 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
2723 # ActiveIf constraint: CYGDBG_USE_TRACING
2724 # CYGDBG_USE_TRACING == 0
2728 # No user value, uncomment the following line to provide one.
2730 # value_source default
2732 # Legal values: 5 to 65535
2735 # Wrap trace buffer when full
2736 # When the trace buffer has filled with records it
2737 # starts again at the beginning. Hence only the last
2738 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
2741 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
2742 # This option is not active
2743 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
2744 # ActiveIf constraint: CYGDBG_USE_TRACING
2745 # CYGDBG_USE_TRACING == 0
2749 # No user value, uncomment the following line to provide one.
2751 # value_source default
2755 # Halt trace buffer when full
2756 # When the trace buffer has filled with records it
2757 # stops recording. Hence only the first
2758 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
2761 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
2762 # This option is not active
2763 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
2764 # ActiveIf constraint: CYGDBG_USE_TRACING
2765 # CYGDBG_USE_TRACING == 0
2769 # No user value, uncomment the following line to provide one.
2771 # value_source default
2775 # Print trace buffer when full
2776 # When the trace buffer has filled with records it
2777 # prints the contents of the buffer. The buffer is then
2778 # emptied and the system continues.
2780 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
2781 # This option is not active
2782 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
2783 # ActiveIf constraint: CYGDBG_USE_TRACING
2784 # CYGDBG_USE_TRACING == 0
2788 # No user value, uncomment the following line to provide one.
2790 # value_source default
2794 # Print trace buffer on assert fail
2795 # When an assertion fails the trace buffer will be
2796 # printed to the default diagnostic device.
2798 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
2799 # This option is not active
2800 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
2801 # ActiveIf constraint: CYGDBG_USE_TRACING
2802 # CYGDBG_USE_TRACING == 0
2806 # No user value, uncomment the following line to provide one.
2808 # value_source default
2813 # Use function names
2814 # All trace and assert calls within eCos contain a
2815 # reference to the builtin macro '__PRETTY_FUNCTION__',
2816 # which evaluates to a string containing
2817 # the name of the current function.
2818 # This is useful when reading a trace log.
2819 # It is possible to suppress the use of the function name
2820 # by disabling this option.
2821 # This results in smaller code size, but there is less
2822 # human-readable information available in the trace output,
2823 # possibly only filenames and line numbers.
2825 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
2826 # This option is not active
2827 # The parent CYGPKG_INFRA_DEBUG is disabled
2830 # No user value, uncomment the following line to provide one.
2832 # value_source default
2838 # Some packages require a startup routine to be called.
2839 # This can be carried out by application code, by supplying
2840 # a routine called cyg_package_start() which calls the
2841 # appropriate package startup routine(s).
2842 # Alternatively, this routine can be constructed automatically
2843 # and configured to call the startup routines of your choice.
2845 cdl_component CYGPKG_INFRA_STARTUP {
2846 # There is no associated value.
2850 # Start uITRON subsystem
2851 # Generate a call to initialize the
2852 # uITRON compatibility subsystem
2853 # within the system version of cyg_package_start().
2854 # This enables compatibility with uITRON.
2855 # You must configure uITRON with the correct tasks before
2856 # starting the uItron subsystem.
2857 # If this is disabled, and you want to use uITRON,
2858 # you must call cyg_uitron_start() from your own
2859 # cyg_package_start() or cyg_userstart().
2861 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
2862 # This option is not active
2863 # ActiveIf constraint: CYGPKG_UITRON
2864 # CYGPKG_UITRON (unknown) == 0
2868 # No user value, uncomment the following line to provide one.
2870 # value_source default
2872 # Requires: CYGPKG_UITRON
2873 # CYGPKG_UITRON (unknown) == 0
2878 # Smaller slower memcpy()
2879 # Enabling this option causes the implementation of
2880 # the standard memcpy() routine to reduce code
2881 # size at the expense of execution speed. This
2882 # option is automatically enabled with the use of
2883 # the -Os option to the compiler. Also note that
2884 # the compiler will try to use its own builtin
2885 # version of memcpy() if possible, ignoring the
2886 # implementation in this package, unless given
2887 # the -fno-builtin compiler option.
2889 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
2891 # No user value, uncomment the following line to provide one.
2893 # value_source default
2897 # Smaller slower memset()
2898 # Enabling this option causes the implementation of
2899 # the standard memset() routine to reduce code
2900 # size at the expense of execution speed. This
2901 # option is automatically enabled with the use of
2902 # the -Os option to the compiler. Also note that
2903 # the compiler will try to use its own builtin
2904 # version of memset() if possible, ignoring the
2905 # implementation in this package, unless given
2906 # the -fno-builtin compiler option.
2908 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
2910 # No user value, uncomment the following line to provide one.
2912 # value_source default
2916 # Provide empty C++ delete functions
2917 # To deal with virtual destructors, where the correct delete()
2918 # function must be called for the derived class in question, the
2919 # underlying delete is called when needed, from destructors. This
2920 # is regardless of whether the destructor is called by delete itself.
2921 # So there is a reference to delete() from all destructors. The
2922 # default builtin delete() attempts to call free() if there is
2923 # one defined. So, if you have destructors, and you have free(),
2924 # as in malloc() and free(), any destructor counts as a reference
2925 # to free(). So the dynamic memory allocation code is linked
2926 # in regardless of whether it gets explicitly called. This
2927 # increases code and data size needlessly.
2928 # To defeat this undesirable behaviour, we define empty versions
2929 # of delete and delete. But doing this prevents proper use
2930 # of dynamic memory in C++ programs via C++'s new and delete
2932 # Therefore, this option is provided
2933 # for explicitly disabling the provision of these empty functions,
2934 # so that new and delete can be used, if that is what is required.
2936 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
2938 # No user value, uncomment the following line to provide one.
2940 # value_source default
2944 # Provide dummy abort() function
2945 # This option controls the inclusion of a dummy abort() function.
2946 # Parts of the C and C++ compiler runtime systems contain references
2947 # to abort(), particulary in the C++ exception handling code. It is
2948 # not possible to eliminate these references, so this dummy function
2949 # in included to satisfy them. It is not expected that this function
2950 # will ever be called, so its current behaviour is to simply loop.
2952 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
2954 # No user value, uncomment the following line to provide one.
2956 # value_source default
2957 # Default value: CYGINT_ISO_EXIT == 0
2958 # CYGINT_ISO_EXIT == 0
2960 # Requires: !CYGINT_ISO_EXIT
2961 # CYGINT_ISO_EXIT == 0
2965 # Provide dummy strlen() function
2966 # This option controls the inclusion of a dummy strlen() function.
2967 # Parts of the C and C++ compiler runtime systems contain references
2968 # to strlen(), particulary in the C++ exception handling code. It is
2969 # not possible to eliminate these references, so this dummy function
2970 # in included to satisfy them. While it is not expected that this function
2971 # will ever be called, it is functional but uses the simplest, smallest
2972 # algorithm. There is a faster version of strlen() in the C library.
2974 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
2976 # No user value, uncomment the following line to provide one.
2978 # value_source default
2979 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
2980 # CYGINT_ISO_STRING_STRFUNCS == 1
2982 # Requires: !CYGINT_ISO_STRING_STRFUNCS
2983 # CYGINT_ISO_STRING_STRFUNCS == 1
2987 # Make all compiler warnings show as errors
2988 # Enabling this option will cause all compiler warnings to show
2989 # as errors and bring the library build to a halt. This is used
2990 # to ensure that the code base is warning free, and thus ensure
2991 # that newly introduced warnings stand out and get fixed before
2992 # they show up as weird run-time behavior.
2994 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
2996 # No user value, uncomment the following line to provide one.
2998 # value_source default
3000 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
3001 # CYGBLD_GLOBAL_CFLAGS == "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
3005 # Make compiler and assembler communicate by pipe
3006 # Enabling this option will cause the compiler to feed the
3007 # assembly output the the assembler via a pipe instead of
3008 # via a temporary file. This normally reduces the build
3011 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
3013 # No user value, uncomment the following line to provide one.
3015 # value_source default
3017 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
3018 # CYGBLD_GLOBAL_CFLAGS == "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
3022 # Infra build options
3023 # Package specific build options including control over
3024 # compiler flags used only in building this package.
3026 cdl_component CYGPKG_INFRA_OPTIONS {
3027 # There is no associated value.
3031 # Additional compiler flags
3032 # This option modifies the set of compiler flags for
3033 # building the eCos infra package. These flags are used
3034 # in addition to the set of global flags.
3036 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
3038 # No user value, uncomment the following line to provide one.
3040 # value_source default
3044 # Suppressed compiler flags
3045 # This option modifies the set of compiler flags for
3046 # building the eCos infra package. These flags are removed from
3047 # the set of global flags if present.
3049 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
3051 # No user value, uncomment the following line to provide one.
3053 # value_source default
3057 # Suppressed linker flags
3058 # This option modifies the set of linker flags for
3059 # building the eCos infra package tests. These flags are removed from
3060 # the set of global flags if present.
3062 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
3064 # No user value, uncomment the following line to provide one.
3065 # user_value -Wl,--gc-sections
3066 # value_source default
3067 # Default value: -Wl,--gc-sections
3070 # Additional linker flags
3071 # This option modifies the set of linker flags for
3072 # building the eCos infra package tests. These flags are added to
3073 # the set of global flags if present.
3075 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
3077 # No user value, uncomment the following line to provide one.
3078 # user_value -Wl,--fatal-warnings
3079 # value_source default
3080 # Default value: -Wl,--fatal-warnings
3083 # Infra package tests
3085 cdl_option CYGPKG_INFRA_TESTS {
3086 # Calculated value: "tests/cxxsupp"
3088 # Current_value: tests/cxxsupp
3093 # Redboot ROM monitor
3094 # doc: ref/redboot.html
3095 # This package supports the Redboot [stand-alone debug monitor]
3096 # using eCos as the underlying board support mechanism.
3098 cdl_package CYGPKG_REDBOOT {
3099 # Packages cannot be added or removed, nor can their version be changed,
3100 # simply by editing their value. Instead the appropriate configuration
3101 # should be used to perform these actions.
3103 # This value cannot be modified here.
3105 # Current value: 1 current
3107 # The following properties are affected by this value
3108 # component CYGPKG_REDBOOT_ARM_OPTIONS
3109 # ActiveIf: CYGPKG_REDBOOT
3110 # component CYGPKG_REDBOOT_XSCALE_OPTIONS
3111 # ActiveIf: CYGPKG_REDBOOT
3112 # component CYGPKG_REDBOOT_HAL_OPTIONS
3113 # ActiveIf: CYGPKG_REDBOOT
3117 # Include support for ELF file format
3119 cdl_option CYGSEM_REDBOOT_ELF {
3121 # No user value, uncomment the following line to provide one.
3123 # value_source default
3127 # Methods of loading images using redboot
3129 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
3130 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
3131 # Implemented by CYGPKG_REDBOOT_NETWORKING, inactive, enabled
3132 # This value cannot be modified here.
3136 # The following properties are affected by this value
3137 # component CYGBLD_BUILD_REDBOOT
3138 # Requires: CYGINT_REDBOOT_LOAD_METHOD
3141 # Build Redboot ROM ELF image
3142 # This option enables the building of the Redboot ELF image.
3143 # The image may require further relocation or symbol
3144 # stripping before being converted to a binary image.
3145 # This is handled by a rule in the target CDL.
3147 cdl_component CYGBLD_BUILD_REDBOOT {
3152 # Requires: CYGPKG_INFRA
3153 # CYGPKG_INFRA == current
3155 # Requires: CYGPKG_ISOINFRA
3156 # CYGPKG_ISOINFRA == current
3158 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3159 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
3160 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
3162 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3163 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
3164 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
3166 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
3167 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3169 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
3170 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
3172 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
3173 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
3175 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
3176 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
3178 # Requires: CYGINT_ISO_STRING_MEMFUNCS
3179 # CYGINT_ISO_STRING_MEMFUNCS == 1
3181 # Requires: CYGINT_ISO_STRING_STRFUNCS
3182 # CYGINT_ISO_STRING_STRFUNCS == 1
3184 # Requires: CYGINT_REDBOOT_LOAD_METHOD
3185 # CYGINT_REDBOOT_LOAD_METHOD == 1
3188 # The following properties are affected by this value
3189 # option CYGBLD_BUILD_REDBOOT_BIN
3190 # ActiveIf: CYGBLD_BUILD_REDBOOT
3194 # Threads debugging support
3195 # Enabling this option will include special code in the GDB stubs to
3196 # support debugging of threaded programs. In the case of eCos programs,
3197 # this support allows GDB to have complete access to the eCos threads
3200 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
3201 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
3202 # CYG_HAL_STARTUP == ROM
3206 # No user value, uncomment the following line to provide one.
3208 # value_source default
3210 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3211 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3215 # Customized version string
3216 # Use this option to define a customized version "string" for
3217 # RedBoot. Note: this value is only cosmetic, displayed by the
3218 # "version" command, but is useful for providing site specific
3219 # information about the RedBoot configuration.
3221 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
3225 # Default value: 0 0
3228 # Enable command line editing
3229 # If this option is non-zero, RedBoot will remember the last N command
3230 # lines. These lines may be reused. Enabling this history will also
3231 # enable rudimentary editting of the lines themselves.
3233 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
3235 # No user value, uncomment the following line to provide one.
3237 # value_source default
3241 # Include support gzip/zlib decompression
3243 cdl_option CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
3244 # This option is not active
3245 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
3246 # CYGPKG_COMPRESS_ZLIB (unknown) == 0
3250 # No user value, uncomment the following line to provide one.
3252 # value_source default
3255 # The following properties are affected by this value
3256 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
3257 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
3260 # Include support for xyzModem downloads
3261 # doc: ref/download-command.html
3263 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
3265 # No user value, uncomment the following line to provide one.
3267 # value_source default
3271 # Include MS Windows CE support
3272 # doc: ref/wince.html
3273 # This option enables MS Windows CE EShell support
3274 # and Windows CE .BIN images support
3276 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
3283 # Include POSIX checksum command
3284 # doc: ref/cksum-command.html
3286 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
3288 # No user value, uncomment the following line to provide one.
3290 # value_source default
3294 # Include memory fill command
3295 # doc: ref/mfill-command.html
3297 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
3299 # No user value, uncomment the following line to provide one.
3301 # value_source default
3305 # Include memory compare command
3306 # doc: ref/mcmp-command.html
3308 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
3310 # No user value, uncomment the following line to provide one.
3312 # value_source default
3316 # Include memory dump command
3317 # doc: ref/dump-command.html
3319 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
3321 # No user value, uncomment the following line to provide one.
3323 # value_source default
3327 # Include cache command
3328 # doc: ref/cache-command.html
3330 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
3332 # No user value, uncomment the following line to provide one.
3334 # value_source default
3338 # Include exec command
3339 # doc: ref/exec-command.html
3341 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
3343 # No user value, uncomment the following line to provide one.
3345 # value_source default
3348 # The following properties are affected by this value
3349 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
3350 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
3353 # Redboot Networking
3354 # This option includes networking support in RedBoot.
3356 cdl_component CYGPKG_REDBOOT_NETWORKING {
3357 # This option is not active
3358 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
3359 # CYGPKG_IO_ETH_DRIVERS (unknown) == 0
3363 # No user value, uncomment the following line to provide one.
3365 # value_source default
3370 # Print net debug information
3371 # This option is overriden by the configuration stored in flash.
3373 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
3374 # This option is not active
3375 # The parent CYGPKG_REDBOOT_NETWORKING is not active
3378 # No user value, uncomment the following line to provide one.
3380 # value_source default
3384 # Support HTTP for download
3385 # This option enables the use of the HTTP protocol for download
3387 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
3388 # This option is not active
3389 # The parent CYGPKG_REDBOOT_NETWORKING is not active
3392 # No user value, uncomment the following line to provide one.
3394 # value_source default
3398 # Default IP address
3399 # This IP address is the default used by RedBoot if a BOOTP/DHCP
3400 # server does not respond. The numbers should be separated by
3401 # *commas*, and not dots. If an IP address is configured into
3402 # the Flash configuration, that will be used in preference.
3404 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
3405 # This option is not active
3406 # The parent CYGPKG_REDBOOT_NETWORKING is not active
3409 # No user value, uncomment the following line to provide one.
3411 # value_source default
3412 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
3413 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
3418 # Do not try to use BOOTP
3419 # By default Redboot tries to use BOOTP to get an IP
3420 # address. If there's no BOOTP server on your network
3421 # use this option to avoid to wait until the
3422 # timeout. This option is overriden by the
3423 # configuration stored in flash.
3425 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
3426 # This option is not active
3427 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is not active
3428 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
3431 # No user value, uncomment the following line to provide one.
3433 # value_source default
3438 # Use DHCP to get IP information
3439 # Use DHCP protocol to obtain pertinent IP addresses, such
3440 # as the client, server, gateway, etc.
3442 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
3443 # This option is not active
3444 # The parent CYGPKG_REDBOOT_NETWORKING is not active
3447 # No user value, uncomment the following line to provide one.
3449 # value_source default
3453 # Use a gateway for non-local IP traffic
3454 # Enabling this option will allow the RedBoot networking
3455 # stack to use a [single] gateway to reach a non-local
3456 # IP address. If disabled, RedBoot will only be able to
3457 # reach nodes on the same subnet.
3459 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
3460 # This option is not active
3461 # The parent CYGPKG_REDBOOT_NETWORKING is not active
3464 # No user value, uncomment the following line to provide one.
3466 # value_source default
3471 # Default gateway IP address
3472 # This IP address is the default used by RedBoot if a BOOTP/DHCP
3473 # server does not respond. The numbers should be separated by
3474 # *commas*, and not dots. If an IP address is configured into
3475 # the Flash configuration, that will be used in preference.
3477 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
3478 # This option is not active
3479 # The parent CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY is not active
3482 # No user value, uncomment the following line to provide one.
3484 # value_source default
3485 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
3486 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
3490 # Default IP address mask
3491 # This IP address mask is the default used by RedBoot if a BOOTP/DHCP
3492 # server does not respond. The numbers should be separated by
3493 # *commas*, and not dots. If an IP address is configured into
3494 # the Flash configuration, that will be used in preference.
3496 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
3497 # This option is not active
3498 # The parent CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY is not active
3501 # No user value, uncomment the following line to provide one.
3503 # value_source default
3504 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
3505 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
3510 # TCP port to listen for incoming connections
3511 # RedBoot will 'listen' on this port for incoming TCP connections.
3512 # This allows outside connections to be made to the platform, either
3513 # for GDB or RedBoot commands.
3515 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
3516 # This option is not active
3517 # The parent CYGPKG_REDBOOT_NETWORKING is not active
3520 # No user value, uncomment the following line to provide one.
3522 # value_source default
3523 # Default value: 9000
3526 # Number of [network] packet buffers
3527 # RedBoot may need to buffer network data to support various connections.
3528 # This option allows control over the number of such buffered packets,
3529 # and in turn, controls the amount of memory used by RedBoot (which
3530 # is not available to user applications). Each packet buffer takes up
3531 # about 1514 bytes. Note: there is little need to make this larger
3534 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
3535 # This option is not active
3536 # The parent CYGPKG_REDBOOT_NETWORKING is not active
3539 # No user value, uncomment the following line to provide one.
3541 # value_source default
3543 # Legal values: 3 to 8
3547 # When this option is enabled, RedBoot will be built with
3548 # support for DNS, allowing use of hostnames on the command
3551 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
3552 # This option is not active
3553 # The parent CYGPKG_REDBOOT_NETWORKING is not active
3556 # No user value, uncomment the following line to provide one.
3558 # value_source default
3560 # Requires: CYGPKG_NS_DNS
3561 # CYGPKG_NS_DNS == current
3563 # Requires: !CYGPKG_NS_DNS_BUILD
3564 # CYGPKG_NS_DNS_BUILD == 0
3570 # This option sets the IP of the default DNS. The IP can be
3571 # changed at runtime as well.
3573 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
3574 # This option is not active
3575 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
3576 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
3577 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
3581 # No user value, uncomment the following line to provide one.
3582 # user_value 0.0.0.0
3583 # value_source default
3584 # Default value: 0.0.0.0
3587 # Timeout in DNS lookup
3588 # This option sets the timeout used when looking up an
3589 # address via the DNS. Default is 10 seconds.
3591 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
3592 # This option is not active
3593 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
3596 # No user value, uncomment the following line to provide one.
3598 # value_source default
3604 # Allow RedBoot to use any I/O channel for its console.
3605 # If this option is enabled then RedBoot will attempt to use all
3606 # defined serial I/O channels for its console device. Once input
3607 # arrives at one of these channels then the console will use only
3610 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
3617 # Allow RedBoot to adjust the baud rate on the serial console.
3618 # If this option is enabled then RedBoot will support commands to set
3619 # and query the baud rate on the selected console.
3621 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
3622 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
3623 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
3627 # No user value, uncomment the following line to provide one.
3629 # value_source default
3633 # Maximum command line length
3634 # This option allows control over how long the CLI command line
3635 # should be. This space will be allocated statically
3636 # rather than from RedBoot's stack.
3638 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
3640 # No user value, uncomment the following line to provide one.
3642 # value_source default
3643 # Default value: 256
3646 # Command processing idle timeout (ms)
3647 # This option controls the timeout period before the
3648 # command processing is considered 'idle'. Making this
3649 # number smaller will cause idle processing to take place
3650 # more often, etc. The default value of 10ms is a reasonable
3651 # tradeoff between responsiveness and overhead.
3653 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
3655 # No user value, uncomment the following line to provide one.
3657 # value_source default
3661 # Size of zlib decompression buffer
3662 # This is the size of the buffer filled with incoming data
3663 # during load before calls are made to the decompressor
3664 # function. For ethernet downloads this can be made bigger
3665 # (at the cost of memory), but for serial downloads on slow
3666 # processors it may be necessary to reduce the size to
3667 # avoid serial overruns. zlib appears to bail out if less than
3668 # five bytes are available initially so this is the minimum.
3670 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
3671 # This option is not active
3672 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
3673 # CYGPKG_COMPRESS_ZLIB (unknown) == 0
3677 # No user value, uncomment the following line to provide one.
3679 # value_source default
3681 # Legal values: 5 to 256
3684 # Validate RAM addresses during load
3685 # This option controls whether or not RedBoot will make sure that
3686 # memory being used by the "load" command is in fact in user RAM.
3687 # Leaving the option enabled makes for a safer environment, but this
3688 # check may not be valid on all platforms, thus the ability to
3689 # disable it. ** Disable this only with great care **
3691 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
3693 # No user value, uncomment the following line to provide one.
3695 # value_source default
3699 # Allow RedBoot to support FLASH programming
3700 # If this option is enabled then RedBoot will provide commands
3701 # to manage images in FLASH memory. These images can be loaded
3702 # into memory for execution or executed in place.
3704 cdl_component CYGPKG_REDBOOT_FLASH {
3705 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
3706 # CYGHWR_IO_FLASH_DEVICE == 1
3710 # No user value, uncomment the following line to provide one.
3712 # value_source default
3717 # Minimum image size
3718 # This option controls the minimum length of images kept by
3719 # the FIS. In particular, it should be large enough to hold
3720 # the RedBoot primary image itself, as well as be a natural
3721 # multiple of the FLASH erase block size.
3723 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
3725 user_value 0x00040000
3727 # Default value: 0x00020000
3730 # Offset from start of FLASH to RedBoot boot image
3731 # This option controls where the RedBoot boot image is located
3732 # relative to the start of FLASH.
3734 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
3736 # No user value, uncomment the following line to provide one.
3738 # value_source default
3739 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
3740 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
3742 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3743 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
3744 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3747 # The following properties are affected by this value
3748 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3749 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3750 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
3751 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3754 # Size of reserved area at start of FLASH
3755 # This option reserves an area at the start of FLASH where RedBoot
3756 # will never interfere; it is expected that this area contains
3757 # (non-RedBoot-based) POST code or some other boot monitor that
3758 # executes before RedBoot.
3760 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
3762 # No user value, uncomment the following line to provide one.
3764 # value_source default
3767 # The following properties are affected by this value
3768 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3769 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
3770 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3771 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3772 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
3773 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
3776 # RedBoot Flash Image System support
3777 # doc: ref/flash-image-system.html
3778 # This option enables the Flash Image System commands
3779 # and support within RedBoot. If disabled, simple Flash
3780 # access commands such as "fis write" will still exist.
3781 # This option would be disabled for targets that need simple
3782 # FLASH manipulation, but do not have the need or space for
3783 # complete image management.
3785 cdl_option CYGOPT_REDBOOT_FIS {
3787 # No user value, uncomment the following line to provide one.
3789 # value_source default
3792 # The following properties are affected by this value
3793 # component CYGPKG_REDBOOT_FIS_CONTENTS
3794 # ActiveIf: CYGOPT_REDBOOT_FIS
3795 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
3796 # ActiveIf: CYGOPT_REDBOOT_FIS
3797 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
3798 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
3801 # Flash Image System default directory contents
3803 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
3804 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
3805 # CYGOPT_REDBOOT_FIS == 1
3808 # Calculated value: 1
3814 # Flash block containing the Directory
3815 # Which block of flash should hold the directory
3816 # information. Positive numbers are absolute block numbers.
3817 # Negative block numbers count backwards from the last block.
3818 # eg 2 means block 2, -2 means the last but one block.
3820 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
3822 # No user value, uncomment the following line to provide one.
3824 # value_source default
3828 # Pseudo-file to describe reserved area
3829 # If an area of FLASH is reserved, it is informative to
3830 # have a fis entry describing it. This option controls
3831 # creation of such an entry by default in the fis init
3834 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
3835 # This option is not active
3836 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
3837 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
3841 # No user value, uncomment the following line to provide one.
3843 # value_source default
3847 # File to describe RedBoot boot image
3848 # Normally a ROM-startup RedBoot image is first in the
3849 # FLASH, and the system boots using that image. This
3850 # option controls creation of an entry describing it in
3851 # the fis init command. It might be disabled if a
3852 # platform has an immutable boot image of its own, where
3853 # we use a POST-startup RedBoot instead, which performs
3854 # less board initialization.
3856 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
3858 # No user value, uncomment the following line to provide one.
3860 # value_source default
3863 # The following properties are affected by this value
3864 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
3865 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
3868 # File to describe RedBoot POST-compatible image
3869 # This option controls creation of an entry describing a
3870 # POST-startup RedBoot image in the fis init command.
3871 # Not all platforms support POST-startup. A platform
3872 # might have both for testing purposes, where the
3873 # eventual user would substitute their own POST code for
3874 # the initial ROM-startup RedBoot, and then jump to the
3875 # POST-compatible RedBoot immediately following.
3877 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
3879 # No user value, uncomment the following line to provide one.
3881 # value_source default
3882 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
3883 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
3888 # Offset of POST image from FLASH start
3889 # This option specifies the offset for a POST image from
3890 # the start of FLASH. If unset, then the fis entry
3891 # describing the POST image will be placed where
3894 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
3895 # This option is not active
3896 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
3899 # No user value, uncomment the following line to provide one.
3901 # value_source default
3902 # Default value: 0 0
3903 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3904 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
3905 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3908 # The following properties are affected by this value
3909 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
3910 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
3914 # File to describe RedBoot backup image
3915 # This option controls creation of an entry describing a
3916 # backup RedBoot image in the fis init command.
3917 # Conventionally a RAM-startup RedBoot image is kept
3918 # under this name for use in updating the ROM-based
3919 # RedBoot that boots the board.
3921 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
3923 # No user value, uncomment the following line to provide one.
3925 # value_source default
3929 # Include ARM SIB ID in FIS
3930 # If set, this option will cause the last 5 words of
3931 # the FIS to include the special ID needed for the
3932 # flash to be recognized as a reserved area for RedBoot
3933 # by an ARM BootRom monitor.
3935 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
3937 # No user value, uncomment the following line to provide one.
3939 # value_source default
3943 # Size of FIS directory entry
3944 # The FIS directory is limited to one single flash
3945 # sector. If your flash has tiny sectors, you may wish
3946 # to reduce this value in order to get more slots in
3947 # the FIS directory.
3949 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
3951 # No user value, uncomment the following line to provide one.
3953 # value_source default
3954 # Default value: 256
3958 # Keep RedBoot configuration data in FLASH
3959 # When this option is enabled, RedBoot will keep configuration
3960 # data in a separate block of FLASH memory. This data will
3961 # include such items as the node IP address or startup scripts.
3963 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
3965 # No user value, uncomment the following line to provide one.
3967 # value_source default
3970 # The following properties are affected by this value
3971 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
3972 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
3973 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
3974 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
3975 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
3976 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
3977 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
3978 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
3979 # option CYGFUN_REDBOOT_BOOT_SCRIPT
3980 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
3984 # Length of configuration data in FLASH
3985 # This option is used to control the amount of memory and FLASH
3986 # to be used for configuration options (persistent storage).
3988 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
3990 # No user value, uncomment the following line to provide one.
3992 # value_source default
3993 # Default value: 4096
3996 # Merged config data and FIS directory
3997 # If this option is set, then the FIS directory and FLASH
3998 # configuration database will be stored in the same physical
4001 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
4002 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
4003 # CYGOPT_REDBOOT_FIS == 1
4007 # No user value, uncomment the following line to provide one.
4009 # value_source default
4013 # Which block of flash to use
4014 # Which block of flash should hold the configuration
4015 # information. Positive numbers are absolute block numbers.
4016 # Negative block numbers count backwards from the last block.
4017 # eg 2 means block 2, -2 means the last but one block.
4019 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
4021 # No user value, uncomment the following line to provide one.
4023 # value_source default
4027 # Support simple macros/aliases in FLASH
4028 # This option is used to allow support for simple text-based
4029 # macros (aliases). These aliases are kept in the FLASH
4030 # configuration data (persistent storage).
4032 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
4034 # No user value, uncomment the following line to provide one.
4036 # value_source default
4040 # Length of strings in FLASH configuration data
4041 # This option is used to control the amount of memory and FLASH
4042 # to be used for string configuration options (persistent storage).
4044 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
4046 # No user value, uncomment the following line to provide one.
4048 # value_source default
4049 # Default value: 128
4052 # Length of configuration script(s) in FLASH
4053 # This option is used to control the amount of memory and FLASH
4054 # to be used for configuration options (persistent storage).
4056 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
4058 # No user value, uncomment the following line to provide one.
4060 # value_source default
4061 # Default value: 512
4064 # Fallback to read-only FLASH configuration
4065 # This option will cause the configuration information to
4066 # revert to the readonly information stored in the FLASH.
4067 # The option only takes effect after
4068 # 1) the config_ok flag has been set to be true,
4069 # indicating that at one time the copy in RAM was valid;
4071 # 2) the information in RAM has been verified to be invalid
4073 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
4075 # No user value, uncomment the following line to provide one.
4077 # value_source default
4082 # Keep all RedBoot FLASH data blocks locked.
4083 # When this option is enabled, RedBoot will keep configuration
4084 # data and the FIS directory blocks implicitly locked. While
4085 # this is somewhat safer, it does add overhead during updates.
4087 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
4088 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
4089 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 1
4093 # No user value, uncomment the following line to provide one.
4095 # value_source default
4099 # Use CRC checksums on FIS images.
4100 # When this option is enabled, RedBoot will use CRC checksums
4101 # when reading and writing flash images.
4103 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
4105 # No user value, uncomment the following line to provide one.
4107 # value_source default
4111 # ARM FLASH drivers support SIB flash block structure
4112 # This interface is implemented by a flash driver
4113 # to indicate that it supports the ARM SIB flash
4116 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
4117 # No options implement this inferface
4118 # ActiveIf constraint: CYGPKG_HAL_ARM
4119 # CYGPKG_HAL_ARM == current
4122 # This value cannot be modified here.
4126 # The following properties are affected by this value
4127 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
4128 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
4131 # Use ARM SIB flash block structure
4132 # This option is used to interpret ARM Flash System information
4135 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
4136 # This option is not active
4137 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
4138 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
4142 # No user value, uncomment the following line to provide one.
4144 # value_source default
4149 # Allow RedBoot to support disks
4150 # If this option is enabled then RedBoot will provide commands
4151 # to load disk files.
4153 cdl_component CYGPKG_REDBOOT_DISK {
4154 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
4155 # CYGINT_HAL_PLF_IF_IDE == 1
4165 # Maximum number of supported disks
4166 # This option controls the number of disks supported by RedBoot.
4168 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
4175 # Maximum number of partitions per disk
4176 # This option controls the maximum number of supported partitions per disk.
4178 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
4185 # Support IDE disks.
4186 # When this option is enabled, RedBoot will support IDE disks.
4188 cdl_component CYGSEM_REDBOOT_DISK_IDE {
4190 # No user value, uncomment the following line to provide one.
4192 # value_source default
4196 # Support Linux second extended filesystems.
4197 # When this option is enabled, RedBoot will support IDE disks.
4199 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
4201 # No user value, uncomment the following line to provide one.
4203 # value_source default
4207 # Support ISO9660 filesystems.
4208 # When this option is enabled, RedBoot will support ISO9660 filesystems.
4210 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
4211 # Calculated value: 0
4218 # doc: ref/persistent-state-flash.html
4219 # This contains options related to RedBoot's boot script
4222 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
4223 # There is no associated value.
4227 # Boot scripting enabled
4228 # This option controls whether RedBoot boot script
4229 # functionality is enabled.
4231 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
4232 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
4233 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
4234 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4237 # Calculated value: 1
4242 # Use default RedBoot boot script
4243 # If enabled, this option will tell RedBoot to use the value of
4244 # this option as a default boot script.
4246 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
4248 # No user value, uncomment the following line to provide one.
4250 # value_source default
4251 # Default value: 0 0
4253 # The following properties are affected by this value
4254 # option CYGFUN_REDBOOT_BOOT_SCRIPT
4255 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
4258 # Resolution (in ms) for script timeout value.
4259 # This option controls the resolution of the script timeout.
4260 # The value is specified in milliseconds (ms), thus to have the
4261 # script timeout be defined in terms of tenths of seconds, use 100.
4263 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
4265 # No user value, uncomment the following line to provide one.
4267 # value_source default
4271 # Script default timeout value
4272 # This option is used to set the default timeout for startup
4273 # scripts, when they are enabled.
4275 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
4277 # No user value, uncomment the following line to provide one.
4279 # value_source default
4280 # Default value: 100
4284 # Behave like a ROM monitor
4285 # Enabling this option will allow RedBoot to provide ROM monitor-style
4286 # services to programs which it executes.
4288 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
4289 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
4290 # CYG_HAL_STARTUP == ROM
4291 # CYG_HAL_STARTUP == ROM
4294 # Calculated value: 1
4297 # Requires: CYGSEM_HAL_ROM_MONITOR
4298 # CYGSEM_HAL_ROM_MONITOR == 1
4302 # Allow RedBoot to handle GNUPro application 'syscalls'.
4303 # If this option is enabled then RedBoot will install a syscall handler
4304 # to support debugging of applications based on GNUPro newlib/bsp.
4306 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
4308 # No user value, uncomment the following line to provide one.
4310 # value_source default
4313 # The following properties are affected by this value
4314 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
4315 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
4316 # option CYGPKG_HAL_GDB_FILEIO
4317 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
4321 # Support additional syscalls for 'gprof' profiling
4322 # Support additional syscalls to support a periodic callback
4323 # function for histogram-style profiling, and an enquire/set
4325 # The application must use the GNUPro newlib facilities
4328 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
4329 # This option is not active
4330 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
4331 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
4332 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
4336 # No user value, uncomment the following line to provide one.
4338 # value_source default
4342 # Does the HAL support 'gprof' profiling?
4344 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
4345 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
4346 # This option is not active
4347 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
4349 # This value cannot be modified here.
4353 # The following properties are affected by this value
4354 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
4355 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
4359 # Use a common buffer for Zlib and FIS
4360 # Use a common memory buffer for both the zlib workspace
4361 # and FIS directory operations. This can save a substantial
4362 # amount of RAM, especially when flash sectors are large.
4364 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
4365 # This option is not active
4366 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4367 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 0
4368 # CYGOPT_REDBOOT_FIS == 1
4372 # No user value, uncomment the following line to provide one.
4374 # value_source default
4379 # Size of Zlib/FIS common buffer
4380 # Size of common buffer to allocate. Must be at least the
4381 # size of one flash sector.
4383 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
4384 # This option is not active
4385 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is not active
4386 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
4389 # No user value, uncomment the following line to provide one.
4390 # user_value 0x0000C000
4391 # value_source default
4392 # Default value: 0x0000C000
4393 # Legal values: 0x4000 to 0x80000000
4398 # Redboot for ARM options
4399 # This option lists the target's requirements for a valid Redboot
4402 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
4403 # ActiveIf constraint: CYGPKG_REDBOOT
4404 # CYGPKG_REDBOOT == current
4407 # There is no associated value.
4409 # The following properties are affected by this value
4413 # Provide the exec command in RedBoot
4414 # This option contains requirements for booting linux
4415 # from RedBoot. The component is enabled/disabled from
4418 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
4419 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4420 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
4423 # There is no associated value.
4427 # Physical base address of linux kernel
4428 # This is the physical address of the base of the
4429 # Linux kernel image.
4431 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
4433 user_value 0xa0008000
4435 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
4436 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xa0008000
4440 # Default physical base address of linux kernel
4441 # This is the physical address of the base of the
4442 # Linux kernel image. This option gets set by the
4445 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
4447 user_value 0xa0008000
4449 # Default value: 0x00008000
4451 # The following properties are affected by this value
4452 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
4453 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
4456 # Base address of linux kernel parameter tags
4457 # This is the base address of the area of memory used to
4458 # pass parameters to the Linux kernel. This should be chosen
4459 # to avoid overlap with the kernel and any ramdisk image.
4461 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
4463 user_value 0xa0001000
4465 # Default value: 0x00000100
4470 # Redboot for XScale options
4471 # This option lists the target's requirements for a valid Redboot
4474 cdl_component CYGPKG_REDBOOT_XSCALE_OPTIONS {
4475 # ActiveIf constraint: CYGPKG_REDBOOT
4476 # CYGPKG_REDBOOT == current
4479 # There is no associated value.
4482 # Redboot HAL options
4483 # This option lists the target's requirements for a valid Redboot
4486 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
4487 # ActiveIf constraint: CYGPKG_REDBOOT
4488 # CYGPKG_REDBOOT == current
4491 # There is no associated value.
4495 # Build Redboot ROM binary image
4496 # This option enables the conversion of the Redboot ELF
4497 # image to a binary image suitable for ROM programming.
4499 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
4500 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
4501 # CYGBLD_BUILD_REDBOOT == 1
4505 # No user value, uncomment the following line to provide one.
4507 # value_source default
4513 # ISO C and POSIX infrastructure
4514 # eCos supports implementations of ISO C libraries and POSIX
4515 # implementations. This package provides infrastructure used by
4516 # all such implementations.
4518 cdl_package CYGPKG_ISOINFRA {
4519 # Packages cannot be added or removed, nor can their version be changed,
4520 # simply by editing their value. Instead the appropriate configuration
4521 # should be used to perform these actions.
4523 # This value cannot be modified here.
4525 # Current value: 1 current
4527 # The following properties are affected by this value
4528 # package CYGPKG_IO_FLASH
4529 # Requires: CYGPKG_ISOINFRA
4530 # component CYGBLD_BUILD_REDBOOT
4531 # Requires: CYGPKG_ISOINFRA
4532 # package CYGPKG_LIBC_STRING
4533 # Requires: CYGPKG_ISOINFRA
4537 # Startup and termination
4539 cdl_component CYGPKG_ISO_STARTUP {
4540 # There is no associated value.
4544 # main() startup implementations
4545 # Implementations of this interface arrange for a user-supplied
4546 # main() to be called in an ISO compatible environment.
4548 cdl_interface CYGINT_ISO_MAIN_STARTUP {
4549 # No options implement this inferface
4550 # This value cannot be modified here.
4553 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
4554 # CYGINT_ISO_MAIN_STARTUP == 0
4557 # The following properties are affected by this value
4558 # interface CYGINT_ISO_MAIN_STARTUP
4559 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
4562 # environ implementations
4563 # Implementations of this interface provide the environ
4564 # variable required by POSIX.
4566 cdl_interface CYGINT_ISO_ENVIRON {
4567 # No options implement this inferface
4568 # This value cannot be modified here.
4571 # Requires: 1 >= CYGINT_ISO_ENVIRON
4572 # CYGINT_ISO_ENVIRON == 0
4575 # The following properties are affected by this value
4576 # interface CYGINT_ISO_ENVIRON
4577 # Requires: 1 >= CYGINT_ISO_ENVIRON
4583 cdl_component CYGPKG_ISO_CTYPE_H {
4584 # There is no associated value.
4588 # Number of implementations of ctype functions
4590 cdl_interface CYGINT_ISO_CTYPE {
4591 # No options implement this inferface
4592 # This value cannot be modified here.
4595 # Requires: 1 >= CYGINT_ISO_CTYPE
4596 # CYGINT_ISO_CTYPE == 0
4599 # The following properties are affected by this value
4600 # interface CYGINT_ISO_CTYPE
4601 # Requires: 1 >= CYGINT_ISO_CTYPE
4602 # option CYGFUN_LIBC_STRING_BSD_FUNCS
4603 # Requires: CYGINT_ISO_CTYPE
4604 # option CYGPKG_NS_DNS_BUILD
4605 # Requires: CYGINT_ISO_CTYPE
4608 # Ctype implementation header
4610 cdl_option CYGBLD_ISO_CTYPE_HEADER {
4612 # No user value, uncomment the following line to provide one.
4614 # value_source default
4615 # Default value: 0 0
4621 cdl_component CYGPKG_ISO_ERRNO {
4622 # There is no associated value.
4626 # Number of implementations of error codes
4628 cdl_interface CYGINT_ISO_ERRNO_CODES {
4629 # No options implement this inferface
4630 # This value cannot be modified here.
4633 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
4634 # CYGINT_ISO_ERRNO_CODES == 0
4637 # The following properties are affected by this value
4638 # interface CYGINT_ISO_ERRNO_CODES
4639 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
4642 # Error codes implementation header
4644 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
4646 # No user value, uncomment the following line to provide one.
4648 # value_source default
4649 # Default value: 0 0
4652 # Number of implementations of errno variable
4654 cdl_interface CYGINT_ISO_ERRNO {
4655 # No options implement this inferface
4656 # This value cannot be modified here.
4659 # Requires: 1 >= CYGINT_ISO_ERRNO
4660 # CYGINT_ISO_ERRNO == 0
4663 # The following properties are affected by this value
4664 # interface CYGINT_ISO_ERRNO
4665 # Requires: 1 >= CYGINT_ISO_ERRNO
4668 # errno variable implementation header
4670 cdl_option CYGBLD_ISO_ERRNO_HEADER {
4672 # No user value, uncomment the following line to provide one.
4674 # value_source default
4675 # Default value: 0 0
4679 # Locale-related functions
4681 cdl_component CYGPKG_ISO_LOCALE {
4682 # There is no associated value.
4686 # Number of implementations of locale functions
4688 cdl_interface CYGINT_ISO_LOCALE {
4689 # No options implement this inferface
4690 # This value cannot be modified here.
4693 # Requires: 1 >= CYGINT_ISO_LOCALE
4694 # CYGINT_ISO_LOCALE == 0
4697 # The following properties are affected by this value
4698 # interface CYGINT_ISO_LOCALE
4699 # Requires: 1 >= CYGINT_ISO_LOCALE
4702 # Locale implementation header
4704 cdl_option CYGBLD_ISO_LOCALE_HEADER {
4706 # No user value, uncomment the following line to provide one.
4708 # value_source default
4709 # Default value: 0 0
4713 # Standard I/O-related functionality
4715 cdl_component CYGPKG_ISO_STDIO {
4716 # There is no associated value.
4720 # Number of implementations of stdio file types
4722 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
4723 # No options implement this inferface
4724 # This value cannot be modified here.
4726 # Current value: 0 0
4727 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
4728 # CYGINT_ISO_STDIO_FILETYPES == 0
4731 # The following properties are affected by this value
4732 # interface CYGINT_ISO_STDIO_FILETYPES
4733 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
4736 # Stdio file types implementation header
4738 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
4740 # No user value, uncomment the following line to provide one.
4742 # value_source default
4743 # Default value: 0 0
4746 # Stdio standard streams implementations
4748 cdl_interface CYGINT_ISO_STDIO_STREAMS {
4749 # No options implement this inferface
4750 # This value cannot be modified here.
4752 # Current value: 0 0
4753 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
4754 # CYGINT_ISO_STDIO_STREAMS == 0
4757 # The following properties are affected by this value
4758 # interface CYGINT_ISO_STDIO_STREAMS
4759 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
4762 # Stdio standard streams implementation header
4763 # This header file must define stdin, stdout
4766 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
4768 # No user value, uncomment the following line to provide one.
4770 # value_source default
4771 # Default value: 0 0
4774 # Number of implementations of stdio file operations
4776 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
4777 # No options implement this inferface
4778 # This value cannot be modified here.
4780 # Current value: 0 0
4781 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
4782 # CYGINT_ISO_STDIO_FILEOPS == 0
4785 # The following properties are affected by this value
4786 # interface CYGINT_ISO_STDIO_FILEOPS
4787 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
4790 # Stdio file operations implementation header
4791 # This header controls the file system operations on a file
4792 # such as remove(), rename(), tmpfile(), tmpnam() and associated
4795 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
4797 # No user value, uncomment the following line to provide one.
4799 # value_source default
4800 # Default value: 0 0
4803 # Number of implementations of stdio file access functionals
4805 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
4806 # No options implement this inferface
4807 # This value cannot be modified here.
4809 # Current value: 0 0
4810 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
4811 # CYGINT_ISO_STDIO_FILEACCESS == 0
4814 # The following properties are affected by this value
4815 # interface CYGINT_ISO_STDIO_FILEACCESS
4816 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
4819 # Stdio file access implementation header
4820 # This header controls the file access operations
4821 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
4822 # setvbuf(), and associated constants.
4824 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
4826 # No user value, uncomment the following line to provide one.
4828 # value_source default
4829 # Default value: 0 0
4832 # Number of implementations of stdio formatted I/O
4834 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
4835 # No options implement this inferface
4836 # This value cannot be modified here.
4838 # Current value: 0 0
4839 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
4840 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
4843 # The following properties are affected by this value
4844 # interface CYGINT_ISO_STDIO_FORMATTED_IO
4845 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
4848 # Stdio formatted I/O implementation header
4850 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
4852 # No user value, uncomment the following line to provide one.
4854 # value_source default
4855 # Default value: 0 0
4858 # Number of implementations of stdio character I/O
4860 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
4861 # No options implement this inferface
4862 # This value cannot be modified here.
4864 # Current value: 0 0
4865 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
4866 # CYGINT_ISO_STDIO_CHAR_IO == 0
4869 # The following properties are affected by this value
4870 # interface CYGINT_ISO_STDIO_CHAR_IO
4871 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
4874 # Stdio character I/O implementation header
4876 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
4878 # No user value, uncomment the following line to provide one.
4880 # value_source default
4881 # Default value: 0 0
4884 # Number of implementations of stdio direct I/O
4886 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
4887 # No options implement this inferface
4888 # This value cannot be modified here.
4890 # Current value: 0 0
4891 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
4892 # CYGINT_ISO_STDIO_DIRECT_IO == 0
4895 # The following properties are affected by this value
4896 # interface CYGINT_ISO_STDIO_DIRECT_IO
4897 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
4900 # Stdio direct I/O implementation header
4902 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
4904 # No user value, uncomment the following line to provide one.
4906 # value_source default
4907 # Default value: 0 0
4910 # Number of implementations of stdio file positioning
4912 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
4913 # No options implement this inferface
4914 # This value cannot be modified here.
4916 # Current value: 0 0
4917 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
4918 # CYGINT_ISO_STDIO_FILEPOS == 0
4921 # The following properties are affected by this value
4922 # interface CYGINT_ISO_STDIO_FILEPOS
4923 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
4926 # Stdio file positioning implementation header
4928 cdl_option CYGBLD_ISO_STDIO_FILEPOS {
4930 # No user value, uncomment the following line to provide one.
4932 # value_source default
4933 # Default value: 0 0
4936 # Number of implementations of stdio error handling
4938 cdl_interface CYGINT_ISO_STDIO_ERROR {
4939 # No options implement this inferface
4940 # This value cannot be modified here.
4942 # Current value: 0 0
4943 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
4944 # CYGINT_ISO_STDIO_ERROR == 0
4947 # The following properties are affected by this value
4948 # interface CYGINT_ISO_STDIO_ERROR
4949 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
4952 # Stdio error handling implementation header
4954 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
4956 # No user value, uncomment the following line to provide one.
4958 # value_source default
4959 # Default value: 0 0
4962 # POSIX fd-related function implementations
4964 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
4965 # No options implement this inferface
4966 # This value cannot be modified here.
4968 # Current value: 0 0
4969 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
4970 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
4973 # The following properties are affected by this value
4974 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
4975 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
4978 # POSIX fd-related function implementation header
4980 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
4982 # No user value, uncomment the following line to provide one.
4984 # value_source default
4985 # Default value: 0 0
4989 # Standard general utility functions
4991 cdl_component CYGPKG_ISO_STDLIB {
4992 # There is no associated value.
4996 # String conversion function implementations
4998 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
4999 # No options implement this inferface
5000 # This value cannot be modified here.
5003 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
5004 # CYGINT_ISO_STDLIB_STRCONV == 0
5007 # The following properties are affected by this value
5008 # interface CYGINT_ISO_STDLIB_STRCONV
5009 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
5012 # String conversion function implementation header
5014 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
5016 # No user value, uncomment the following line to provide one.
5018 # value_source default
5019 # Default value: 0 0
5022 # String to FP conversion function implementations
5024 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
5025 # No options implement this inferface
5026 # This value cannot be modified here.
5029 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
5030 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
5033 # The following properties are affected by this value
5034 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
5035 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
5038 # String to FP conversion function implementation header
5040 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
5042 # No user value, uncomment the following line to provide one.
5044 # value_source default
5045 # Default value: 0 0
5048 # Random number generator implementations
5050 cdl_interface CYGINT_ISO_RAND {
5051 # No options implement this inferface
5052 # This value cannot be modified here.
5055 # Requires: 1 >= CYGINT_ISO_RAND
5056 # CYGINT_ISO_RAND == 0
5059 # The following properties are affected by this value
5060 # interface CYGINT_ISO_RAND
5061 # Requires: 1 >= CYGINT_ISO_RAND
5064 # Random number generator implementation header
5066 cdl_option CYGBLD_ISO_RAND_HEADER {
5068 # No user value, uncomment the following line to provide one.
5070 # value_source default
5071 # Default value: 0 0
5074 # Malloc implementations
5076 cdl_interface CYGINT_ISO_MALLOC {
5077 # No options implement this inferface
5078 # This value cannot be modified here.
5081 # Requires: 1 >= CYGINT_ISO_MALLOC
5082 # CYGINT_ISO_MALLOC == 0
5085 # The following properties are affected by this value
5086 # interface CYGINT_ISO_MALLOC
5087 # Requires: 1 >= CYGINT_ISO_MALLOC
5088 # option CYGPKG_NS_DNS_BUILD
5089 # Requires: CYGINT_ISO_MALLOC
5092 # Malloc implementation header
5094 cdl_option CYGBLD_ISO_MALLOC_HEADER {
5096 # No user value, uncomment the following line to provide one.
5098 # value_source default
5099 # Default value: 0 0
5102 # Mallinfo() implementations
5104 cdl_interface CYGINT_ISO_MALLINFO {
5105 # No options implement this inferface
5106 # This value cannot be modified here.
5109 # Requires: 1 >= CYGINT_ISO_MALLINFO
5110 # CYGINT_ISO_MALLINFO == 0
5113 # The following properties are affected by this value
5114 # interface CYGINT_ISO_MALLINFO
5115 # Requires: 1 >= CYGINT_ISO_MALLINFO
5118 # Mallinfo() implementation header
5120 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
5122 # No user value, uncomment the following line to provide one.
5124 # value_source default
5125 # Default value: 0 0
5128 # Program exit functionality implementations
5130 cdl_interface CYGINT_ISO_EXIT {
5131 # No options implement this inferface
5132 # This value cannot be modified here.
5135 # Requires: 1 >= CYGINT_ISO_EXIT
5136 # CYGINT_ISO_EXIT == 0
5139 # The following properties are affected by this value
5140 # interface CYGINT_ISO_EXIT
5141 # Requires: 1 >= CYGINT_ISO_EXIT
5142 # option CYGFUN_INFRA_DUMMY_ABORT
5143 # Requires: !CYGINT_ISO_EXIT
5144 # option CYGFUN_INFRA_DUMMY_ABORT
5145 # DefaultValue: CYGINT_ISO_EXIT == 0
5148 # Program exit functionality implementation header
5150 cdl_option CYGBLD_ISO_EXIT_HEADER {
5152 # No user value, uncomment the following line to provide one.
5154 # value_source default
5155 # Default value: 0 0
5158 # Program environment implementations
5160 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
5161 # No options implement this inferface
5162 # This value cannot be modified here.
5165 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
5166 # CYGINT_ISO_STDLIB_ENVIRON == 0
5169 # The following properties are affected by this value
5170 # interface CYGINT_ISO_STDLIB_ENVIRON
5171 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
5174 # Program environment implementation header
5176 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
5178 # No user value, uncomment the following line to provide one.
5180 # value_source default
5181 # Default value: 0 0
5184 # system() implementations
5186 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
5187 # No options implement this inferface
5188 # This value cannot be modified here.
5191 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
5192 # CYGINT_ISO_STDLIB_SYSTEM == 0
5195 # The following properties are affected by this value
5196 # interface CYGINT_ISO_STDLIB_SYSTEM
5197 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
5200 # system() implementation header
5202 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
5204 # No user value, uncomment the following line to provide one.
5206 # value_source default
5207 # Default value: 0 0
5210 # bsearch() implementations
5212 cdl_interface CYGINT_ISO_BSEARCH {
5213 # No options implement this inferface
5214 # This value cannot be modified here.
5217 # Requires: 1 >= CYGINT_ISO_BSEARCH
5218 # CYGINT_ISO_BSEARCH == 0
5221 # The following properties are affected by this value
5222 # interface CYGINT_ISO_BSEARCH
5223 # Requires: 1 >= CYGINT_ISO_BSEARCH
5226 # bsearch() implementation header
5228 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
5230 # No user value, uncomment the following line to provide one.
5232 # value_source default
5233 # Default value: 0 0
5236 # qsort() implementations
5238 cdl_interface CYGINT_ISO_QSORT {
5239 # No options implement this inferface
5240 # This value cannot be modified here.
5243 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
5244 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
5248 # qsort() implementation header
5250 cdl_option CYGBLD_ISO_QSORT_HEADER {
5252 # No user value, uncomment the following line to provide one.
5254 # value_source default
5255 # Default value: 0 0
5258 # abs()/labs() implementations
5260 cdl_interface CYGINT_ISO_ABS {
5261 # No options implement this inferface
5262 # This value cannot be modified here.
5265 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
5266 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
5270 # abs()/labs() implementation header
5272 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
5274 # No user value, uncomment the following line to provide one.
5276 # value_source default
5277 # Default value: 0 0
5280 # div()/ldiv() implementations
5282 cdl_interface CYGINT_ISO_DIV {
5283 # No options implement this inferface
5284 # This value cannot be modified here.
5287 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
5288 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
5292 # div()/ldiv() implementation header
5294 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
5296 # No user value, uncomment the following line to provide one.
5298 # value_source default
5299 # Default value: 0 0
5302 # Header defining the implementation's MB_CUR_MAX
5304 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
5306 # No user value, uncomment the following line to provide one.
5308 # value_source default
5309 # Default value: 0 0
5312 # Multibyte character implementations
5314 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
5315 # No options implement this inferface
5316 # This value cannot be modified here.
5319 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
5320 # CYGINT_ISO_STDLIB_MULTIBYTE == 0
5323 # The following properties are affected by this value
5324 # interface CYGINT_ISO_STDLIB_MULTIBYTE
5325 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
5328 # Multibyte character implementation header
5330 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
5332 # No user value, uncomment the following line to provide one.
5334 # value_source default
5335 # Default value: 0 0
5341 cdl_component CYGPKG_ISO_STRING {
5342 # There is no associated value.
5346 # Number of implementations of strerror() function
5348 cdl_interface CYGINT_ISO_STRERROR {
5349 # No options implement this inferface
5350 # This value cannot be modified here.
5352 # Current value: 0 0
5353 # Requires: 1 >= CYGINT_ISO_STRERROR
5354 # CYGINT_ISO_STRERROR == 0
5357 # The following properties are affected by this value
5358 # interface CYGINT_ISO_STRERROR
5359 # Requires: 1 >= CYGINT_ISO_STRERROR
5362 # strerror() implementation header
5364 cdl_option CYGBLD_ISO_STRERROR_HEADER {
5366 # No user value, uncomment the following line to provide one.
5368 # value_source default
5369 # Default value: 0 0
5372 # memcpy() implementation header
5374 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
5376 # No user value, uncomment the following line to provide one.
5378 # value_source default
5379 # Default value: 0 0
5382 # memset() implementation header
5384 cdl_option CYGBLD_ISO_MEMSET_HEADER {
5386 # No user value, uncomment the following line to provide one.
5388 # value_source default
5389 # Default value: 0 0
5392 # Number of implementations of strtok_r() function
5394 cdl_interface CYGINT_ISO_STRTOK_R {
5395 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5396 # This value cannot be modified here.
5398 # Current value: 1 1
5399 # Requires: 1 >= CYGINT_ISO_STRTOK_R
5400 # CYGINT_ISO_STRTOK_R == 1
5403 # The following properties are affected by this value
5404 # interface CYGINT_ISO_STRTOK_R
5405 # Requires: 1 >= CYGINT_ISO_STRTOK_R
5408 # strtok_r() implementation header
5410 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
5412 # No user value, uncomment the following line to provide one.
5414 # The inferred value should not be edited directly.
5415 inferred_value 1 <cyg/libc/string/string.h>
5416 # value_source inferred
5417 # Default value: 0 0
5419 # The following properties are affected by this value
5420 # package CYGPKG_LIBC_STRING
5421 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
5424 # Number of implementations of locale-specific string functions
5425 # This covers locale-dependent string functions such as strcoll()
5428 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
5429 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5430 # This value cannot be modified here.
5432 # Current value: 1 1
5433 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
5434 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
5437 # The following properties are affected by this value
5438 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
5439 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
5442 # Locale-specific string functions' implementation header
5443 # This covers locale-dependent string functions such as strcoll()
5446 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
5448 # No user value, uncomment the following line to provide one.
5450 # The inferred value should not be edited directly.
5451 inferred_value 1 <cyg/libc/string/string.h>
5452 # value_source inferred
5453 # Default value: 0 0
5455 # The following properties are affected by this value
5456 # package CYGPKG_LIBC_STRING
5457 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
5460 # Number of implementations of BSD string functions
5462 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
5463 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
5464 # This value cannot be modified here.
5466 # Current value: 0 0
5467 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
5468 # CYGINT_ISO_STRING_BSD_FUNCS == 0
5471 # The following properties are affected by this value
5472 # interface CYGINT_ISO_STRING_BSD_FUNCS
5473 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
5476 # BSD string functions' implementation header
5478 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
5480 # No user value, uncomment the following line to provide one.
5482 # The inferred value should not be edited directly.
5483 inferred_value 1 <cyg/libc/string/bsdstring.h>
5484 # value_source inferred
5485 # Default value: 0 0
5487 # The following properties are affected by this value
5488 # option CYGFUN_LIBC_STRING_BSD_FUNCS
5489 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
5492 # Number of implementations of other mem*() functions
5494 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
5495 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5496 # This value cannot be modified here.
5498 # Current value: 1 1
5499 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
5500 # CYGINT_ISO_STRING_MEMFUNCS == 1
5503 # The following properties are affected by this value
5504 # interface CYGINT_ISO_STRING_MEMFUNCS
5505 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
5506 # component CYGBLD_BUILD_REDBOOT
5507 # Requires: CYGINT_ISO_STRING_MEMFUNCS
5510 # Other mem*() functions' implementation header
5512 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
5514 # No user value, uncomment the following line to provide one.
5516 # The inferred value should not be edited directly.
5517 inferred_value 1 <cyg/libc/string/string.h>
5518 # value_source inferred
5519 # Default value: 0 0
5521 # The following properties are affected by this value
5522 # package CYGPKG_LIBC_STRING
5523 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
5526 # Number of implementations of other ISO C str*() functions
5527 # This covers the other str*() functions defined by ISO C.
5529 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
5530 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5531 # This value cannot be modified here.
5533 # Current value: 1 1
5534 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
5535 # CYGINT_ISO_STRING_STRFUNCS == 1
5538 # The following properties are affected by this value
5539 # interface CYGINT_ISO_STRING_STRFUNCS
5540 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
5541 # package CYGPKG_IO_FLASH
5542 # Requires: CYGINT_ISO_STRING_STRFUNCS
5543 # option CYGFUN_INFRA_DUMMY_STRLEN
5544 # Requires: !CYGINT_ISO_STRING_STRFUNCS
5545 # option CYGFUN_INFRA_DUMMY_STRLEN
5546 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
5547 # component CYGBLD_BUILD_REDBOOT
5548 # Requires: CYGINT_ISO_STRING_STRFUNCS
5549 # option CYGPKG_NS_DNS_BUILD
5550 # Requires: CYGINT_ISO_STRING_STRFUNCS
5553 # Other ISO C str*() functions' implementation header
5554 # This covers the other str*() functions defined by ISO C.
5556 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
5558 # No user value, uncomment the following line to provide one.
5560 # The inferred value should not be edited directly.
5561 inferred_value 1 <cyg/libc/string/string.h>
5562 # value_source inferred
5563 # Default value: 0 0
5565 # The following properties are affected by this value
5566 # package CYGPKG_LIBC_STRING
5567 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
5571 # Clock and time functionality
5573 cdl_component CYGPKG_ISO_TIME {
5574 # There is no associated value.
5578 # time_t implementation header
5580 cdl_option CYGBLD_ISO_TIME_T_HEADER {
5582 # No user value, uncomment the following line to provide one.
5584 # value_source default
5585 # Default value: 0 0
5588 # clock_t implementation header
5590 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
5592 # No user value, uncomment the following line to provide one.
5594 # value_source default
5595 # Default value: 0 0
5598 # struct timeval implementation header
5600 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
5602 # No user value, uncomment the following line to provide one.
5604 # value_source default
5605 # Default value: 0 0
5608 # Number of implementations of POSIX timer types
5610 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
5611 # No options implement this inferface
5612 # This value cannot be modified here.
5614 # Current value: 0 0
5615 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
5616 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
5619 # The following properties are affected by this value
5620 # interface CYGINT_ISO_POSIX_TIMER_TYPES
5621 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
5624 # POSIX timer types implementation header
5626 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
5628 # No user value, uncomment the following line to provide one.
5630 # value_source default
5631 # Default value: 0 0
5634 # Number of implementations of POSIX clock types
5636 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
5637 # No options implement this inferface
5638 # This value cannot be modified here.
5640 # Current value: 0 0
5641 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
5642 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
5645 # The following properties are affected by this value
5646 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
5647 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
5650 # POSIX clock types implementation header
5652 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
5654 # No user value, uncomment the following line to provide one.
5656 # value_source default
5657 # Default value: 0 0
5660 # Number of implementations of ISO C types
5662 cdl_interface CYGINT_ISO_C_TIME_TYPES {
5663 # No options implement this inferface
5664 # This value cannot be modified here.
5666 # Current value: 0 0
5667 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
5668 # CYGINT_ISO_C_TIME_TYPES == 0
5671 # The following properties are affected by this value
5672 # interface CYGINT_ISO_C_TIME_TYPES
5673 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
5676 # ISO C time types implementation header
5678 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
5680 # No user value, uncomment the following line to provide one.
5682 # value_source default
5683 # Default value: 0 0
5686 # Number of implementations of POSIX timers
5688 cdl_interface CYGINT_ISO_POSIX_TIMERS {
5689 # No options implement this inferface
5690 # This value cannot be modified here.
5692 # Current value: 0 0
5693 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
5694 # CYGINT_ISO_POSIX_TIMERS == 0
5697 # The following properties are affected by this value
5698 # interface CYGINT_ISO_POSIX_TIMERS
5699 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
5702 # POSIX timer implementation header
5704 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
5706 # No user value, uncomment the following line to provide one.
5708 # value_source default
5709 # Default value: 0 0
5712 # Number of implementations of POSIX clocks
5714 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
5715 # No options implement this inferface
5716 # This value cannot be modified here.
5718 # Current value: 0 0
5719 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
5720 # CYGINT_ISO_POSIX_CLOCKS == 0
5723 # The following properties are affected by this value
5724 # interface CYGINT_ISO_POSIX_CLOCKS
5725 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
5728 # POSIX clocks implementation header
5730 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
5732 # No user value, uncomment the following line to provide one.
5734 # value_source default
5735 # Default value: 0 0
5738 # Number of implementations of ISO C clock functions
5740 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
5741 # No options implement this inferface
5742 # This value cannot be modified here.
5744 # Current value: 0 0
5745 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
5746 # CYGINT_ISO_C_CLOCK_FUNCS == 0
5749 # The following properties are affected by this value
5750 # interface CYGINT_ISO_C_CLOCK_FUNCS
5751 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
5754 # ISO C clock functions' implementation header
5756 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
5758 # No user value, uncomment the following line to provide one.
5760 # value_source default
5761 # Default value: 0 0
5764 # Number of implementations of tzset() function
5766 cdl_interface CYGINT_ISO_TZSET {
5767 # No options implement this inferface
5768 # This value cannot be modified here.
5770 # Current value: 0 0
5771 # Requires: 1 >= CYGINT_ISO_TZSET
5772 # CYGINT_ISO_TZSET == 0
5775 # The following properties are affected by this value
5776 # interface CYGINT_ISO_TZSET
5777 # Requires: 1 >= CYGINT_ISO_TZSET
5780 # tzset() implementation header
5782 cdl_option CYGBLD_ISO_TZSET_HEADER {
5784 # No user value, uncomment the following line to provide one.
5786 # value_source default
5787 # Default value: 0 0
5791 # Signal functionality
5793 cdl_component CYGPKG_ISO_SIGNAL {
5794 # There is no associated value.
5798 # Number of implementations of signal numbers
5800 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
5801 # No options implement this inferface
5802 # This value cannot be modified here.
5805 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
5806 # CYGINT_ISO_SIGNAL_NUMBERS == 0
5809 # The following properties are affected by this value
5810 # interface CYGINT_ISO_SIGNAL_NUMBERS
5811 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
5814 # Signal numbering implementation header
5815 # This header provides the mapping of signal
5816 # names (e.g. SIGBUS) to numbers.
5818 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
5820 # No user value, uncomment the following line to provide one.
5822 # value_source default
5823 # Default value: 0 0
5826 # Number of signal implementations
5828 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
5829 # No options implement this inferface
5830 # This value cannot be modified here.
5833 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
5834 # CYGINT_ISO_SIGNAL_IMPL == 0
5837 # The following properties are affected by this value
5838 # interface CYGINT_ISO_SIGNAL_IMPL
5839 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
5842 # Signals implementation header
5844 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
5846 # No user value, uncomment the following line to provide one.
5848 # value_source default
5849 # Default value: 0 0
5852 # POSIX real time signals feature test macro
5853 # This defines the POSIX feature test macro
5854 # that indicates that the POSIX real time signals
5857 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
5858 # No options implement this inferface
5859 # This value cannot be modified here.
5862 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
5863 # CYGINT_POSIX_REALTIME_SIGNALS == 0
5866 # The following properties are affected by this value
5867 # interface CYGINT_POSIX_REALTIME_SIGNALS
5868 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
5872 # Non-local jumps functionality
5874 cdl_component CYGPKG_ISO_SETJMP {
5875 # There is no associated value.
5879 # setjmp() / longjmp() implementations
5881 cdl_interface CYGINT_ISO_SETJMP {
5882 # No options implement this inferface
5883 # This value cannot be modified here.
5886 # Requires: 1 >= CYGINT_ISO_SETJMP
5887 # CYGINT_ISO_SETJMP == 0
5890 # The following properties are affected by this value
5891 # interface CYGINT_ISO_SETJMP
5892 # Requires: 1 >= CYGINT_ISO_SETJMP
5895 # setjmp() / longjmp() implementation header
5897 cdl_option CYGBLD_ISO_SETJMP_HEADER {
5899 # No user value, uncomment the following line to provide one.
5901 # value_source default
5902 # Default value: 0 0
5905 # sigsetjmp() / siglongjmp() implementations
5907 cdl_interface CYGINT_ISO_SIGSETJMP {
5908 # No options implement this inferface
5909 # This value cannot be modified here.
5912 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
5913 # CYGINT_ISO_SIGSETJMP == 0
5916 # The following properties are affected by this value
5917 # interface CYGINT_ISO_SIGSETJMP
5918 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
5921 # sigsetjmp() / siglongjmp() implementation header
5923 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
5925 # No user value, uncomment the following line to provide one.
5927 # value_source default
5928 # Default value: 0 0
5932 # Assertions implementation header
5934 cdl_option CYGBLD_ISO_ASSERT_HEADER {
5936 # No user value, uncomment the following line to provide one.
5938 # value_source default
5939 # Default value: 0 0
5942 # POSIX file control
5943 # This covers the POSIX file control definitions,
5944 # normally found in <fcntl.h>
5946 cdl_component CYGPKG_ISO_POSIX_FCNTL {
5947 # There is no associated value.
5951 # POSIX open flags implementation header
5953 cdl_option CYGBLD_ISO_OFLAG_HEADER {
5955 # No user value, uncomment the following line to provide one.
5957 # value_source default
5958 # Default value: 0 0
5961 # POSIX fcntl() implementations
5963 cdl_interface CYGINT_ISO_FCNTL {
5964 # No options implement this inferface
5965 # This value cannot be modified here.
5968 # Requires: 1 >= CYGINT_ISO_FCNTL
5969 # CYGINT_ISO_FCNTL == 0
5972 # The following properties are affected by this value
5973 # interface CYGINT_ISO_FCNTL
5974 # Requires: 1 >= CYGINT_ISO_FCNTL
5977 # POSIX fcntl() implementation header
5979 cdl_option CYGBLD_ISO_FCNTL_HEADER {
5981 # No user value, uncomment the following line to provide one.
5983 # value_source default
5984 # Default value: 0 0
5987 # POSIX file open implementations
5989 cdl_interface CYGINT_ISO_OPEN {
5990 # No options implement this inferface
5991 # This value cannot be modified here.
5994 # Requires: 1 >= CYGINT_ISO_OPEN
5995 # CYGINT_ISO_OPEN == 0
5998 # The following properties are affected by this value
5999 # interface CYGINT_ISO_OPEN
6000 # Requires: 1 >= CYGINT_ISO_OPEN
6003 # POSIX file open implementation header
6005 cdl_option CYGBLD_ISO_OPEN_HEADER {
6007 # No user value, uncomment the following line to provide one.
6009 # value_source default
6010 # Default value: 0 0
6014 # <sys/stat.h> definitions implementation header
6016 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
6018 # No user value, uncomment the following line to provide one.
6020 # value_source default
6021 # Default value: 0 0
6024 # POSIX directory reading implementation
6026 cdl_interface CYGINT_ISO_DIRENT {
6027 # No options implement this inferface
6028 # This value cannot be modified here.
6031 # Requires: 1 >= CYGINT_ISO_DIRENT
6032 # CYGINT_ISO_DIRENT == 0
6035 # The following properties are affected by this value
6036 # interface CYGINT_ISO_DIRENT
6037 # Requires: 1 >= CYGINT_ISO_DIRENT
6040 # <dirent.h> definitions implementation header
6042 cdl_option CYGBLD_ISO_DIRENT_HEADER {
6044 # No user value, uncomment the following line to provide one.
6046 # value_source default
6047 # Default value: 0 0
6050 # POSIX <sys/types.h> contents
6051 # This covers the types required by POSIX to be in
6054 cdl_component CYGPKG_ISO_POSIX_TYPES {
6055 # There is no associated value.
6059 # POSIX thread types implementations
6061 cdl_interface CYGINT_ISO_PTHREADTYPES {
6062 # No options implement this inferface
6063 # This value cannot be modified here.
6066 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6067 # CYGINT_ISO_PTHREADTYPES == 0
6070 # The following properties are affected by this value
6071 # interface CYGINT_ISO_PTHREADTYPES
6072 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6073 # interface CYGINT_ISO_PMUTEXTYPES
6074 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6077 # POSIX thread types implementation header
6079 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
6081 # No user value, uncomment the following line to provide one.
6083 # value_source default
6084 # Default value: 0 0
6087 # POSIX mutex types implementations
6089 cdl_interface CYGINT_ISO_PMUTEXTYPES {
6090 # No options implement this inferface
6091 # This value cannot be modified here.
6094 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6095 # CYGINT_ISO_PTHREADTYPES == 0
6099 # POSIX mutex types implementation header
6101 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
6103 # No user value, uncomment the following line to provide one.
6105 # value_source default
6106 # Default value: 0 0
6109 # ssize_t implementation header
6111 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
6113 # No user value, uncomment the following line to provide one.
6115 # value_source default
6116 # Default value: 0 0
6119 # Filesystem types implementation header
6121 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
6123 # No user value, uncomment the following line to provide one.
6125 # value_source default
6126 # Default value: 0 0
6129 # gid_t, pid_t, uid_t implementation header
6131 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
6133 # No user value, uncomment the following line to provide one.
6135 # value_source default
6136 # Default value: 0 0
6140 # Non-POSIX <sys/types.h> contents
6141 # This covers the extra types required by non-POSIX
6142 # packages to be in <sys/types.h>. These would normally
6143 # only be visible if _POSIX_SOURCE is not defined.
6145 cdl_component CYGPKG_ISO_EXTRA_TYPES {
6146 # There is no associated value.
6150 # BSD compatible types
6152 cdl_interface CYGINT_ISO_BSDTYPES {
6153 # No options implement this inferface
6154 # This value cannot be modified here.
6157 # Requires: 1 >= CYGINT_ISO_BSDTYPES
6158 # CYGINT_ISO_BSDTYPES == 0
6161 # The following properties are affected by this value
6162 # interface CYGINT_ISO_BSDTYPES
6163 # Requires: 1 >= CYGINT_ISO_BSDTYPES
6168 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
6170 # No user value, uncomment the following line to provide one.
6172 # value_source default
6173 # Default value: 0 0
6179 cdl_component CYGPKG_ISO_UTSNAME {
6180 # There is no associated value.
6186 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
6188 # No user value, uncomment the following line to provide one.
6190 # value_source default
6191 # Default value: 0 0
6197 cdl_component CYGPKG_ISO_SCHED {
6198 # There is no associated value.
6202 # POSIX scheduler implementations
6204 cdl_interface CYGINT_ISO_SCHED_IMPL {
6205 # No options implement this inferface
6206 # This value cannot be modified here.
6209 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
6210 # CYGINT_ISO_SCHED_IMPL == 0
6213 # The following properties are affected by this value
6214 # interface CYGINT_ISO_SCHED_IMPL
6215 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
6218 # POSIX scheduler implementation header
6220 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
6222 # No user value, uncomment the following line to provide one.
6224 # value_source default
6225 # Default value: 0 0
6231 cdl_component CYGPKG_ISO_SEMAPHORES {
6232 # There is no associated value.
6236 # POSIX semaphore implementations
6238 cdl_interface CYGINT_ISO_SEMAPHORES {
6239 # No options implement this inferface
6240 # This value cannot be modified here.
6243 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
6244 # CYGINT_ISO_SEMAPHORES == 0
6247 # The following properties are affected by this value
6248 # interface CYGINT_ISO_SEMAPHORES
6249 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
6252 # POSIX semaphore implementation header
6254 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
6256 # No user value, uncomment the following line to provide one.
6258 # value_source default
6259 # Default value: 0 0
6263 # POSIX message queues
6265 cdl_component CYGPKG_ISO_MQUEUE {
6266 # There is no associated value.
6272 cdl_interface CYGINT_ISO_MQUEUE {
6273 # No options implement this inferface
6274 # This value cannot be modified here.
6277 # Requires: 1 >= CYGINT_ISO_MQUEUE
6278 # CYGINT_ISO_MQUEUE == 0
6281 # The following properties are affected by this value
6282 # interface CYGINT_ISO_MQUEUE
6283 # Requires: 1 >= CYGINT_ISO_MQUEUE
6284 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
6285 # ActiveIf: CYGINT_ISO_MQUEUE
6286 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
6287 # ActiveIf: CYGINT_ISO_MQUEUE
6290 # Implementation header
6292 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
6294 # No user value, uncomment the following line to provide one.
6296 # value_source default
6297 # Default value: 0 0
6300 # Maximum number of open message queues
6302 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
6303 # This option is not active
6304 # ActiveIf constraint: CYGINT_ISO_MQUEUE
6305 # CYGINT_ISO_MQUEUE == 0
6309 # No user value, uncomment the following line to provide one.
6311 # value_source default
6312 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
6313 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
6314 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
6318 # Maximum number of message priorities
6320 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
6321 # This option is not active
6322 # ActiveIf constraint: CYGINT_ISO_MQUEUE
6323 # CYGINT_ISO_MQUEUE == 0
6327 # No user value, uncomment the following line to provide one.
6328 # user_value 1 65535
6329 # value_source default
6330 # Default value: 1 65535
6336 cdl_component CYGPKG_ISO_PTHREAD {
6337 # There is no associated value.
6341 # POSIX pthread implementations
6343 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
6344 # No options implement this inferface
6345 # This value cannot be modified here.
6347 # Current value: 0 0
6348 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
6349 # CYGINT_ISO_PTHREAD_IMPL == 0
6352 # The following properties are affected by this value
6353 # interface CYGINT_ISO_PTHREAD_IMPL
6354 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
6357 # POSIX pthread implementation header
6359 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
6361 # No user value, uncomment the following line to provide one.
6363 # value_source default
6364 # Default value: 0 0
6367 # POSIX mutex/cond var implementations
6369 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
6370 # No options implement this inferface
6371 # This value cannot be modified here.
6373 # Current value: 0 0
6374 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
6375 # CYGINT_ISO_PTHREAD_MUTEX == 0
6378 # The following properties are affected by this value
6379 # interface CYGINT_ISO_PTHREAD_MUTEX
6380 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
6383 # POSIX mutex/cond var implementation header
6385 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
6387 # No user value, uncomment the following line to provide one.
6389 # value_source default
6390 # Default value: 0 0
6396 cdl_component CYGPKG_ISO_LIMITS {
6397 # There is no associated value.
6401 # POSIX pthread limits implementations
6403 cdl_interface CYGINT_ISO_POSIX_LIMITS {
6404 # No options implement this inferface
6405 # This value cannot be modified here.
6408 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
6409 # CYGINT_ISO_POSIX_LIMITS == 0
6412 # The following properties are affected by this value
6413 # interface CYGINT_ISO_POSIX_LIMITS
6414 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
6417 # POSIX pthread limits implementation header
6419 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
6421 # No user value, uncomment the following line to provide one.
6423 # value_source default
6424 # Default value: 0 0
6427 # OPEN_MAX implementation header
6429 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
6431 # No user value, uncomment the following line to provide one.
6433 # value_source default
6434 # Default value: 0 0
6437 # LINK_MAX implementation header
6439 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
6441 # No user value, uncomment the following line to provide one.
6443 # value_source default
6444 # Default value: 0 0
6447 # NAME_MAX implementation header
6449 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
6451 # No user value, uncomment the following line to provide one.
6453 # value_source default
6454 # Default value: 0 0
6457 # PATH_MAX implementation header
6459 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
6461 # No user value, uncomment the following line to provide one.
6463 # value_source default
6464 # Default value: 0 0
6470 cdl_component CYGPKG_ISO_TERMIOS {
6471 # There is no associated value.
6475 # POSIX termios implementations
6477 cdl_interface CYGINT_ISO_TERMIOS {
6478 # No options implement this inferface
6479 # This value cannot be modified here.
6482 # Requires: 1 >= CYGINT_ISO_TERMIOS
6483 # CYGINT_ISO_TERMIOS == 0
6486 # The following properties are affected by this value
6487 # interface CYGINT_ISO_TERMIOS
6488 # Requires: 1 >= CYGINT_ISO_TERMIOS
6491 # POSIX termios implementation header
6493 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
6495 # No user value, uncomment the following line to provide one.
6497 # value_source default
6498 # Default value: 0 0
6504 cdl_component CYGPKG_ISO_DLFCN {
6505 # There is no associated value.
6509 # Dynamic load implementations
6511 cdl_interface CYGINT_ISO_DLFCN {
6512 # No options implement this inferface
6513 # This value cannot be modified here.
6516 # Requires: 1 >= CYGINT_ISO_DLFCN
6517 # CYGINT_ISO_DLFCN == 0
6520 # The following properties are affected by this value
6521 # interface CYGINT_ISO_DLFCN
6522 # Requires: 1 >= CYGINT_ISO_DLFCN
6525 # Dynamic load implementation header
6527 cdl_option CYGBLD_ISO_DLFCN_HEADER {
6529 # No user value, uncomment the following line to provide one.
6531 # value_source default
6532 # Default value: 0 0
6536 # UNIX standard functions
6538 cdl_component CYGPKG_ISO_UNISTD {
6539 # There is no associated value.
6543 # POSIX timer operations implementations
6545 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
6546 # No options implement this inferface
6547 # This value cannot be modified here.
6549 # Current value: 0 0
6550 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
6551 # CYGINT_ISO_POSIX_TIMER_OPS == 0
6554 # The following properties are affected by this value
6555 # interface CYGINT_ISO_POSIX_TIMER_OPS
6556 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
6559 # POSIX timer operations implementation header
6561 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
6563 # No user value, uncomment the following line to provide one.
6565 # value_source default
6566 # Default value: 0 0
6569 # POSIX sleep() implementations
6571 cdl_interface CYGINT_ISO_POSIX_SLEEP {
6572 # No options implement this inferface
6573 # This value cannot be modified here.
6575 # Current value: 0 0
6576 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
6577 # CYGINT_ISO_POSIX_SLEEP == 0
6580 # The following properties are affected by this value
6581 # interface CYGINT_ISO_POSIX_SLEEP
6582 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
6585 # POSIX sleep() implementation header
6587 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
6589 # No user value, uncomment the following line to provide one.
6591 # value_source default
6592 # Default value: 0 0
6596 # select()/poll() functions
6598 cdl_component CYGPKG_ISO_SELECT {
6599 # There is no associated value.
6603 # select() implementations
6605 cdl_interface CYGINT_ISO_SELECT {
6606 # No options implement this inferface
6607 # This value cannot be modified here.
6609 # Current value: 0 0
6610 # Requires: 1 >= CYGINT_ISO_SELECT
6611 # CYGINT_ISO_SELECT == 0
6614 # The following properties are affected by this value
6615 # interface CYGINT_ISO_SELECT
6616 # Requires: 1 >= CYGINT_ISO_SELECT
6619 # select() implementation header
6621 cdl_option CYGBLD_ISO_SELECT_HEADER {
6623 # No user value, uncomment the following line to provide one.
6625 # value_source default
6626 # Default value: 0 0
6629 # poll() implementations
6631 cdl_interface CYGINT_ISO_POLL {
6632 # No options implement this inferface
6633 # This value cannot be modified here.
6635 # Current value: 0 0
6636 # Requires: 1 >= CYGINT_ISO_POLL
6637 # CYGINT_ISO_POLL == 0
6640 # The following properties are affected by this value
6641 # interface CYGINT_ISO_POLL
6642 # Requires: 1 >= CYGINT_ISO_POLL
6645 # poll() implementation header
6647 cdl_option CYGBLD_ISO_POLL_HEADER {
6649 # No user value, uncomment the following line to provide one.
6651 # value_source default
6652 # Default value: 0 0
6656 # NetDB utility functions
6658 cdl_component CYGPKG_ISO_NETDB {
6659 # There is no associated value.
6663 # DNS implementations
6665 cdl_interface CYGINT_ISO_DNS {
6666 # Implemented by CYGPKG_NS_DNS_BUILD, active, disabled
6667 # This value cannot be modified here.
6670 # Requires: 1 >= CYGINT_ISO_DNS
6671 # CYGINT_ISO_DNS == 0
6674 # The following properties are affected by this value
6675 # interface CYGINT_ISO_DNS
6676 # Requires: 1 >= CYGINT_ISO_DNS
6679 # DNS implementation header
6681 cdl_option CYGBLD_ISO_DNS_HEADER {
6683 # No user value, uncomment the following line to provide one.
6685 # The inferred value should not be edited directly.
6686 inferred_value 1 <cyg/ns/dns/dns.h>
6687 # value_source inferred
6688 # Default value: 0 0
6690 # The following properties are affected by this value
6691 # option CYGPKG_NS_DNS_BUILD
6692 # Requires: CYGBLD_ISO_DNS_HEADER == "<cyg/ns/dns/dns.h>"
6695 # Protocol network database implementations
6697 cdl_interface CYGINT_ISO_NETDB_PROTO {
6698 # No options implement this inferface
6699 # This value cannot be modified here.
6702 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
6703 # CYGINT_ISO_NETDB_PROTO == 0
6706 # The following properties are affected by this value
6707 # interface CYGINT_ISO_NETDB_PROTO
6708 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
6711 # Protocol network database implementation header
6713 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
6715 # No user value, uncomment the following line to provide one.
6717 # value_source default
6718 # Default value: 0 0
6721 # Services network database implementations
6723 cdl_interface CYGINT_ISO_NETDB_SERV {
6724 # No options implement this inferface
6725 # This value cannot be modified here.
6728 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
6729 # CYGINT_ISO_NETDB_SERV == 0
6732 # The following properties are affected by this value
6733 # interface CYGINT_ISO_NETDB_SERV
6734 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
6737 # Services network database implementation header
6739 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
6741 # No user value, uncomment the following line to provide one.
6743 # value_source default
6744 # Default value: 0 0
6749 # Package specific build options including control over
6750 # compiler flags used only in building this package,
6751 # and details of which tests are built.
6753 cdl_component CYGPKG_ISOINFRA_OPTIONS {
6754 # There is no associated value.
6758 # Additional compiler flags
6759 # This option modifies the set of compiler flags for
6760 # building the ISO C and POSIX infrastructure package.
6761 # These flags are used in addition to the set of global flags.
6763 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
6765 # No user value, uncomment the following line to provide one.
6767 # value_source default
6771 # Suppressed compiler flags
6772 # This option modifies the set of compiler flags for
6773 # building the ISO C and POSIX infrastructure package.
6774 # These flags are removed from the set of global flags
6777 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
6779 # No user value, uncomment the following line to provide one.
6781 # value_source default
6788 # doc: ref/net-ns-dns.html
6790 cdl_package CYGPKG_NS_DNS {
6791 # Packages cannot be added or removed, nor can their version be changed,
6792 # simply by editing their value. Instead the appropriate configuration
6793 # should be used to perform these actions.
6795 # This value cannot be modified here.
6797 # Current value: 1 current
6799 # The following properties are affected by this value
6800 # component CYGPKG_REDBOOT_NETWORKING_DNS
6801 # Requires: CYGPKG_NS_DNS
6805 # Build DNS NS client package
6807 cdl_option CYGPKG_NS_DNS_BUILD {
6809 # No user value, uncomment the following line to provide one.
6811 # The inferred value should not be edited directly.
6813 # value_source inferred
6815 # Requires: CYGBLD_ISO_DNS_HEADER == "<cyg/ns/dns/dns.h>"
6816 # CYGBLD_ISO_DNS_HEADER == <cyg/ns/dns/dns.h>
6818 # Requires: CYGPKG_NET
6819 # CYGPKG_NET (unknown) == 0
6821 # Requires: CYGINT_ISO_CTYPE
6822 # CYGINT_ISO_CTYPE == 0
6824 # Requires: CYGINT_ISO_MALLOC
6825 # CYGINT_ISO_MALLOC == 0
6827 # Requires: CYGINT_ISO_STRING_STRFUNCS
6828 # CYGINT_ISO_STRING_STRFUNCS == 1
6830 # Requires: CYGSEM_KERNEL_THREADS_DESTRUCTORS_PER_THREAD
6831 # CYGSEM_KERNEL_THREADS_DESTRUCTORS_PER_THREAD (unknown) == 0
6834 # The following properties are affected by this value
6835 # component CYGPKG_NS_DNS_DEFAULT
6836 # ActiveIf: CYGPKG_NS_DNS_BUILD
6837 # component CYGPKG_NS_DNS_DOMAINNAME
6838 # ActiveIf: CYGPKG_NS_DNS_BUILD
6839 # option CYGPKG_NS_DNS_TESTS
6840 # ActiveIf: CYGPKG_NS_DNS_BUILD
6841 # component CYGPKG_REDBOOT_NETWORKING_DNS
6842 # Requires: !CYGPKG_NS_DNS_BUILD
6845 # Provide a hard coded default server address
6846 # This option controls the use of a default, hard coded DNS
6847 # server. When this is enabled, the IP address in the CDL
6848 # option CYGDAT_NS_DNS_DEFAULT_SERVER is used in
6849 # init_all_network_interfaces() to start the resolver using
6850 # the specified server. The DHCP client or user code may
6851 # override this by restarting the resolver.
6853 cdl_component CYGPKG_NS_DNS_DEFAULT {
6854 # This option is not active
6855 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
6856 # CYGPKG_NS_DNS_BUILD == 0
6860 # No user value, uncomment the following line to provide one.
6862 # value_source default
6867 # IP address of the default DNS server
6869 cdl_option CYGDAT_NS_DNS_DEFAULT_SERVER {
6870 # This option is not active
6871 # The parent CYGPKG_NS_DNS_DEFAULT is not active
6872 # The parent CYGPKG_NS_DNS_DEFAULT is disabled
6875 # No user value, uncomment the following line to provide one.
6876 # user_value 192.168.1.1
6877 # value_source default
6878 # Default value: 192.168.1.1
6882 # Provide a hard coded default domain name
6883 # This option controls the use of a default, hard coded
6884 # domain name to be used when querying a DNS server. When
6885 # this is enabled, the name in the CDL option
6886 # CYGDAT_NS_DNS_DOMAINNAME_NAME is used in
6887 # init_all_network_interfaces() to set the domain name as
6888 # accessed by getdomainname().
6890 cdl_component CYGPKG_NS_DNS_DOMAINNAME {
6891 # This option is not active
6892 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
6893 # CYGPKG_NS_DNS_BUILD == 0
6897 # No user value, uncomment the following line to provide one.
6899 # value_source default
6904 # Domain name for this device
6906 cdl_option CYGDAT_NS_DNS_DOMAINNAME_NAME {
6907 # This option is not active
6908 # The parent CYGPKG_NS_DNS_DOMAINNAME is not active
6909 # The parent CYGPKG_NS_DNS_DOMAINNAME is disabled
6912 # No user value, uncomment the following line to provide one.
6913 # user_value default.domain.com
6914 # value_source default
6915 # Default value: default.domain.com
6919 # DNS support build options
6921 cdl_component CYGPKG_NS_DNS_OPTIONS {
6922 # There is no associated value.
6926 # Additional compiler flags
6927 # This option modifies the set of compiler flags for
6928 # building the DNS package.
6929 # These flags are used in addition
6930 # to the set of global flags.
6932 cdl_option CYGPKG_NS_DNS_CFLAGS_ADD {
6934 # No user value, uncomment the following line to provide one.
6935 # user_value "-D_KERNEL -D__ECOS"
6936 # value_source default
6937 # Default value: "-D_KERNEL -D__ECOS"
6940 # Suppressed compiler flags
6941 # This option modifies the set of compiler flags for
6942 # building the DNS package. These flags are removed from
6943 # the set of global flags if present.
6945 cdl_option CYGPKG_NS_DNS_CFLAGS_REMOVE {
6947 # No user value, uncomment the following line to provide one.
6949 # value_source default
6955 # This option specifies the set of tests for the DNS package.
6957 cdl_option CYGPKG_NS_DNS_TESTS {
6958 # This option is not active
6959 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
6960 # CYGPKG_NS_DNS_BUILD == 0
6963 # Calculated value: "tests/dns1 tests/dns2"
6965 # Current_value: tests/dns1 tests/dns2
6970 # doc: ref/services-crc.html
6971 # This package provides support for CRC calculation. Currently
6972 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
6973 # Gary S. Brown, and a 16 bit CRC.
6975 cdl_package CYGPKG_CRC {
6976 # Packages cannot be added or removed, nor can their version be changed,
6977 # simply by editing their value. Instead the appropriate configuration
6978 # should be used to perform these actions.
6980 # This value cannot be modified here.
6982 # Current value: 1 current
6988 cdl_option CYGPKG_CRC_TESTS {
6989 # Calculated value: "tests/crc_test"
6991 # Current_value: tests/crc_test