1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX27 current ;
34 package -hardware CYGPKG_HAL_ARM_TX27KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX27 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-926ejs-linux-gnu
79 # value_source default
80 # Default value: arm-926ejs-linux-gnu
83 # Global compiler flags
84 # This option controls the global compiler flags which are used to
85 # compile all packages by default. Individual packages may define
86 # options which override these global flags.
88 cdl_option CYGBLD_GLOBAL_CFLAGS {
90 # No user value, uncomment the following line to provide one.
91 # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # value_source inferred
95 # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX27
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX27 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX27 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX27 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # This option is not active
803 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
804 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
805 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
809 # No user value, uncomment the following line to provide one.
811 # value_source default
816 # Ethernet transceiver (PHY) support
817 # API for ethernet PHY devices
819 cdl_package CYGPKG_DEVS_ETH_PHY {
820 # Packages cannot be added or removed, nor can their version be changed,
821 # simply by editing their value. Instead the appropriate configuration
822 # should be used to perform these actions.
824 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
825 # CYGPKG_IO_ETH_DRIVERS == current
828 # This value cannot be modified here.
830 # Current value: 1 current
831 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
832 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
837 # Enable driver debugging
838 # Enables the diagnostic debug messages on the
841 cdl_option CYGDBG_DEVS_ETH_PHY {
843 # No user value, uncomment the following line to provide one.
845 # value_source default
849 # Time period (seconds) to wait for auto-negotiation
850 # The length of time to wait for auto-negotiation to complete
851 # before giving up and declaring the link dead/missing.
853 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
855 # No user value, uncomment the following line to provide one.
857 # value_source default
862 # Include support for National Semiconductor DP83847 DsPHYTER II
864 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
866 # No user value, uncomment the following line to provide one.
868 # value_source default
873 # Include support for AMD 79C874 NetPHY
875 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
877 # No user value, uncomment the following line to provide one.
879 # value_source default
884 # Include support for Intel LXT972xxx PHY
886 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
888 # No user value, uncomment the following line to provide one.
890 # value_source default
895 # Include support for ICS 1890 PHY
897 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
899 # No user value, uncomment the following line to provide one.
901 # value_source default
906 # Include support for ICS 1892 PHY
908 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
910 # No user value, uncomment the following line to provide one.
912 # value_source default
917 # Include support for ICS 1893 and 1893AF PHY
919 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
921 # No user value, uncomment the following line to provide one.
923 # value_source default
928 # Include support for the Davicom DM9161A PHY
930 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
932 # No user value, uncomment the following line to provide one.
934 # value_source default
939 # Include support for the Micrel KS8721 PHY
941 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
943 # No user value, uncomment the following line to provide one.
945 # value_source default
950 # Include support for SMSC LAN8700 NetPHY
952 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
954 # No user value, uncomment the following line to provide one.
956 # The inferred value should not be edited directly.
958 # value_source inferred
961 # The following properties are affected by this value
962 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
963 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
968 # ISO C library internationalization functions
970 # This package provides internationalization functions specified by the
971 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
972 # functionality and <ctype.h> functionality.
974 cdl_package CYGPKG_LIBC_I18N {
975 # Packages cannot be added or removed, nor can their version be changed,
976 # simply by editing their value. Instead the appropriate configuration
977 # should be used to perform these actions.
979 # This value cannot be modified here.
981 # Current value: 1 current
982 # Requires: CYGPKG_ISOINFRA
983 # CYGPKG_ISOINFRA == current
989 # These options determine which locales other than the "C" locale
990 # are supported and hence contribute to the size of the executable.
992 cdl_component CYGPKG_LIBC_I18N_LOCALES {
993 # There is no associated value.
997 # Support for multiple locales required
999 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1002 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1003 # This value cannot be modified here.
1005 # Current value: 0 0
1006 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1007 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1010 # The following properties are affected by this value
1013 # C-SJIS locale support
1014 # This option controls if the "C-SJIS" locale will be
1015 # supported by setlocale(). The locale is a hybrid locale
1016 # that is mostly the "C" locale with Japanese SJIS multibyte
1019 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1021 # No user value, uncomment the following line to provide one.
1023 # value_source default
1026 # The following properties are affected by this value
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1033 # C-JIS locale support
1034 # This option controls if the "C-JIS" locale will be
1035 # supported by setlocale(). The locale is a hybrid locale
1036 # that is mostly the "C" locale with Japanese JIS multibyte
1039 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1041 # No user value, uncomment the following line to provide one.
1043 # value_source default
1046 # The following properties are affected by this value
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1053 # C-EUCJP locale support
1054 # This option controls if the "C-EUCJP" locale will be
1055 # supported by setlocale(). The locale is a hybrid locale
1056 # that is mostly the "C" locale with Japanese EUCJP multibyte
1059 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1061 # No user value, uncomment the following line to provide one.
1063 # value_source default
1066 # The following properties are affected by this value
1067 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1068 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1069 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1070 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1074 # Newlib's ctype implementation
1075 # This option enables the implementation of the ctype functions
1076 # that comes with newlib. It is table driven and therefore
1077 # exhibits different performance characteristics. It also offers
1078 # a limited amount of binary compatibility
1079 # with newlib so that programs linked against newlib ctype/locale
1080 # do not need to be recompiled when linked with eCos.
1082 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1084 # No user value, uncomment the following line to provide one.
1086 # value_source default
1088 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1089 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1093 # Per-thread multibyte state
1094 # This option controls whether the multibyte character
1095 # handling functions mblen(), mbtowc(), and wctomb(),
1096 # have their state recorded on a per-thread
1097 # basis rather than global. If this option is
1098 # disabled, some per-thread space can be saved.
1099 # Enabling this option will use three slots
1100 # of kernel per-thread data. You should ensure you
1101 # have enough slots configured for all your
1104 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1105 # This option is not active
1106 # ActiveIf constraint: CYGPKG_KERNEL
1107 # CYGPKG_KERNEL (unknown) == 0
1111 # No user value, uncomment the following line to provide one.
1113 # value_source default
1114 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1115 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1117 # Requires: CYGVAR_KERNEL_THREADS_DATA
1118 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1122 # Size of locale name strings
1123 # This option controls the maximum size of
1124 # locale names and is used, among other things
1125 # to instantiate a static string used
1126 # as a return value from the
1127 # setlocale() function. When requesting the
1128 # current locale settings with LC_ALL, a string
1129 # must be constructed to contain this data, rather
1130 # than just returning a constant string. This
1131 # string data is stored in the static string.
1132 # This depends on the length of locale names,
1133 # hence this option. If just the C locale is
1134 # present, this option can be set as low as 2.
1136 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1138 # No user value, uncomment the following line to provide one.
1140 # value_source default
1141 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1142 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1144 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1146 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1147 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1149 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1152 # Inline versions of <ctype.h> functions
1153 # This option chooses whether the simple character
1154 # classification and conversion functions (e.g.
1155 # isupper(), isalpha(), toupper(), etc.)
1156 # from <ctype.h> are available as inline
1157 # functions. This may improve performance and as
1158 # the functions are small, may even improve code
1161 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1163 # No user value, uncomment the following line to provide one.
1165 # value_source default
1167 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1168 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1172 # C library i18n functions build options
1173 # Package specific build options including control over
1174 # compiler flags used only in building this package,
1175 # and details of which tests are built.
1177 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1178 # There is no associated value.
1182 # Additional compiler flags
1183 # This option modifies the set of compiler flags for
1184 # building the C library. These flags are used in addition
1185 # to the set of global flags.
1187 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1189 # No user value, uncomment the following line to provide one.
1190 # user_value "-fno-rtti -Woverloaded-virtual"
1191 # value_source default
1192 # Default value: "-fno-rtti -Woverloaded-virtual"
1195 # Suppressed compiler flags
1196 # This option modifies the set of compiler flags for
1197 # building the C library. These flags are removed from
1198 # the set of global flags if present.
1200 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1202 # No user value, uncomment the following line to provide one.
1203 # user_value -Wno-pointer-sign
1204 # value_source default
1205 # Default value: -Wno-pointer-sign
1208 # C library i18n function tests
1209 # This option specifies the set of tests for the C library
1212 cdl_option CYGPKG_LIBC_I18N_TESTS {
1213 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1215 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1220 # ISO C library general utility functions
1221 # doc: ref/libc.html
1222 # This package provides general utility functions in <stdlib.h>
1223 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1225 cdl_package CYGPKG_LIBC_STDLIB {
1226 # Packages cannot be added or removed, nor can their version be changed,
1227 # simply by editing their value. Instead the appropriate configuration
1228 # should be used to perform these actions.
1230 # This value cannot be modified here.
1232 # Current value: 1 current
1233 # Requires: CYGPKG_ISOINFRA
1234 # CYGPKG_ISOINFRA == current
1236 # Requires: CYGINT_ISO_CTYPE
1237 # CYGINT_ISO_CTYPE == 1
1239 # Requires: CYGINT_ISO_STRING_STRFUNCS
1240 # CYGINT_ISO_STRING_STRFUNCS == 1
1245 # Inline versions of <stdlib.h> functions
1246 # This option chooses whether some of the
1247 # particularly simple standard utility functions
1248 # from <stdlib.h> are available as inline
1249 # functions. This may improve performance, and as
1250 # the functions are small, may even improve code
1253 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1254 # There is no associated value.
1260 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1262 # No user value, uncomment the following line to provide one.
1264 # value_source default
1266 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1267 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1273 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1275 # No user value, uncomment the following line to provide one.
1277 # value_source default
1279 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1280 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1284 # atof() / atoi() / atol()
1286 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1288 # No user value, uncomment the following line to provide one.
1290 # value_source default
1292 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1293 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1298 # Random number generation
1299 # These options control the behaviour of the
1300 # functions rand(), srand() and rand_r()
1302 cdl_component CYGPKG_LIBC_RAND {
1303 # There is no associated value.
1307 # Per-thread random seed
1308 # doc: ref/libc-thread-safety.html
1309 # This option controls whether the pseudo-random
1310 # number generation functions rand() and srand()
1311 # have their state recorded on a per-thread
1312 # basis rather than global. If this option is
1313 # disabled, some per-thread space can be saved.
1314 # Note there is also a POSIX-standard rand_r()
1315 # function to achieve a similar effect with user
1316 # support. Enabling this option will use one slot
1317 # of kernel per-thread data. You should ensure you
1318 # have enough slots configured for all your
1321 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1323 # No user value, uncomment the following line to provide one.
1325 # value_source default
1327 # Requires: CYGVAR_KERNEL_THREADS_DATA
1328 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1332 # Random number seed
1333 # This selects the initial random number seed for
1334 # rand()'s pseudo-random number generator. For
1335 # strict ISO standard compliance, this should be 1,
1336 # as per section 7.10.2.2 of the standard.
1338 cdl_option CYGNUM_LIBC_RAND_SEED {
1340 # No user value, uncomment the following line to provide one.
1342 # value_source default
1344 # Legal values: 0 to 0x7fffffff
1348 # Trace verbosity level for debugging the rand(),
1349 # srand() and rand_r() functions. Increase this
1350 # value to get additional trace output.
1352 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1354 # No user value, uncomment the following line to provide one.
1356 # value_source default
1358 # Legal values: 0 to 1
1361 # Simplest implementation
1362 # This provides a very simple implementation of rand()
1363 # that does not perform well with randomness in the
1364 # lower significant bits. However it is exceptionally
1365 # fast. It uses the sample algorithm from the ISO C
1368 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1370 # No user value, uncomment the following line to provide one.
1372 # value_source default
1376 # Simple implementation #1
1377 # This provides a very simple implementation of rand()
1378 # based on the simplest implementation above. However
1379 # it does try to work around the lack of randomness
1380 # in the lower significant bits, at the expense of a
1383 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1390 # Knuth implementation #1
1391 # This implements a slightly more complex algorithm
1392 # published in Donald E. Knuth's Art of Computer
1393 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1394 # This produces better random numbers than the
1395 # simplest approach but is slower.
1397 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1406 # This option allows use of the utility function
1407 # strtod() (and consequently atof()) to convert
1408 # from string to double precision floating point
1409 # numbers. Disabling this option removes the
1410 # dependency on the math library package.
1412 cdl_option CYGFUN_LIBC_strtod {
1414 # No user value, uncomment the following line to provide one.
1416 # value_source default
1417 # Default value: 0 != CYGPKG_LIBM
1418 # CYGPKG_LIBM (unknown) == 0
1420 # Requires: CYGPKG_LIBM
1421 # CYGPKG_LIBM (unknown) == 0
1425 # Provides long long conversion functions
1426 # Enabling this option will provide support for the strtoll(),
1427 # strtoull() and atoll() conversion functions, which are
1428 # the long long variants of the standard versions of these
1429 # functions. Supporting this requires extra code and compile
1432 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1439 # bsearch() tracing level
1440 # Trace verbosity level for debugging the <stdlib.h>
1441 # binary search function bsearch(). Increase this
1442 # value to get additional trace output.
1444 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1446 # No user value, uncomment the following line to provide one.
1448 # value_source default
1450 # Legal values: 0 to 1
1453 # qsort() tracing level
1454 # Trace verbosity level for debugging the <stdlib.h>
1455 # quicksort function qsort(). Increase this value
1456 # to get additional trace output.
1458 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1460 # No user value, uncomment the following line to provide one.
1462 # value_source default
1464 # Legal values: 0 to 1
1467 # C library stdlib build options
1468 # Package specific build options including control over
1469 # compiler flags used only in building this package,
1470 # and details of which tests are built.
1472 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1473 # There is no associated value.
1477 # Additional compiler flags
1478 # This option modifies the set of compiler flags for
1479 # building this package. These flags are used in addition
1480 # to the set of global flags.
1482 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1484 # No user value, uncomment the following line to provide one.
1485 # user_value "-fno-rtti -Woverloaded-virtual"
1486 # value_source default
1487 # Default value: "-fno-rtti -Woverloaded-virtual"
1490 # Suppressed compiler flags
1491 # This option modifies the set of compiler flags for
1492 # building this package. These flags are removed from
1493 # the set of global flags if present.
1495 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1497 # No user value, uncomment the following line to provide one.
1498 # user_value -Wno-pointer-sign
1499 # value_source default
1500 # Default value: -Wno-pointer-sign
1503 # C library stdlib tests
1504 # This option specifies the set of tests for this package.
1506 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1507 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1509 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1516 # doc: ref/the-ecos-hardware-abstraction-layer.html
1517 # The eCos HAL package provide a porting layer for
1518 # higher-level parts of the system such as the kernel and the
1519 # C library. Each installation should have HAL packages for
1520 # one or more architectures, and for each architecture there
1521 # may be one or more supported platforms. It is necessary to
1522 # select one target architecture and one platform for that
1523 # architecture. There are also a number of configuration
1524 # options that are common to all HAL packages.
1526 cdl_package CYGPKG_HAL {
1527 # Packages cannot be added or removed, nor can their version be changed,
1528 # simply by editing their value. Instead the appropriate configuration
1529 # should be used to perform these actions.
1531 # This value cannot be modified here.
1533 # Current value: 1 current
1534 # Requires: CYGPKG_INFRA
1535 # CYGPKG_INFRA == current
1538 # The following properties are affected by this value
1542 # Platform-independent HAL options
1543 # A number of configuration options are common to most or all
1544 # HAL packages, for example options controlling how much state
1545 # should be saved during a context switch. The implementations
1546 # of these options will vary from architecture to architecture.
1548 cdl_component CYGPKG_HAL_COMMON {
1549 # There is no associated value.
1553 # Provide eCos kernel support
1554 # The HAL can be configured to either support the full eCos
1555 # kernel, or to support only very simple applications which do
1556 # not require a full kernel. If kernel support is not required
1557 # then some of the startup, exception, and interrupt handling
1558 # code can be eliminated.
1560 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1562 # No user value, uncomment the following line to provide one.
1564 # value_source default
1565 # Default value: CYGPKG_KERNEL
1566 # CYGPKG_KERNEL (unknown) == 0
1568 # Requires: CYGPKG_KERNEL
1569 # CYGPKG_KERNEL (unknown) == 0
1573 # HAL exception support
1574 # When a processor exception occurs, for example an attempt to
1575 # execute an illegal instruction or to perform a divide by
1576 # zero, this exception may be handled in a number of different
1577 # ways. If the target system has gdb support then typically
1578 # the exception will be handled by gdb code. Otherwise if the
1579 # HAL exception support is enabled then the HAL will invoke a
1580 # routine deliver_exception(). Typically this routine will be
1581 # provided by the eCos kernel, but it is possible for
1582 # application code to provide its own implementation. If the
1583 # HAL exception support is not enabled and a processor
1584 # exception occurs then the behaviour of the system is
1587 cdl_option CYGPKG_HAL_EXCEPTIONS {
1589 # No user value, uncomment the following line to provide one.
1591 # value_source default
1592 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1593 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1595 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1596 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1600 # Stop calling constructors early
1601 # This option supports environments where some constructors
1602 # must be run in the context of a thread rather than at
1603 # simple system startup time. A boolean flag named
1604 # cyg_hal_stop_constructors is set to 1 when constructors
1605 # should no longer be invoked. It is up to some other
1606 # package to deal with the rest of the constructors.
1607 # In the current version this is only possible with the
1610 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1612 # No user value, uncomment the following line to provide one.
1614 # value_source default
1616 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1617 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1621 # HAL uses the MMU and allows for CDL manipulation of it's use
1623 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1624 # No options implement this inferface
1625 # This value cannot be modified here.
1629 # The following properties are affected by this value
1630 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1631 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1634 # Install MMU tables.
1635 # This option controls whether this application installs
1636 # its own Memory Management Unit (MMU) tables, or relies on the
1637 # existing environment to run.
1639 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1640 # This option is not active
1641 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1642 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1646 # No user value, uncomment the following line to provide one.
1648 # value_source default
1649 # Default value: CYG_HAL_STARTUP != "RAM"
1650 # CYG_HAL_STARTUP == ROMRAM
1653 # The following properties are affected by this value
1654 # option CYGSEM_HAL_STATIC_MMU_TABLES
1655 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1658 # Use static MMU tables.
1659 # This option defines an environment where any Memory
1660 # Management Unit (MMU) tables are constant. Normally used by ROM
1661 # based environments, this provides a way to save RAM usage which
1662 # would otherwise be required for these tables.
1664 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1666 # No user value, uncomment the following line to provide one.
1668 # value_source default
1670 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1671 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1675 # Route diagnostic output to debug channel
1676 # If not inheriting the console setup from the ROM monitor,
1677 # it is possible to redirect diagnostic output to the debug
1678 # channel by enabling this option. Depending on the debugger
1679 # used it may also be necessary to select a mangler for the
1680 # output to be displayed by the debugger.
1682 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1683 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1684 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1686 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1687 # CYGPKG_HAL_ARM == current
1688 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1689 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1690 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1694 # No user value, uncomment the following line to provide one.
1696 # value_source default
1697 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1698 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1699 # CYG_HAL_STARTUP == ROMRAM
1702 # The following properties are affected by this value
1703 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1704 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1708 # Mangler used on diag output
1709 # It is sometimes necessary to mangle (encode) the
1710 # diag ASCII text output in order for it to show up at the
1711 # other end. In particular, GDB may silently ignore raw
1714 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1715 # This option is not active
1716 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1719 # No user value, uncomment the following line to provide one.
1721 # value_source default
1722 # Default value: GDB
1723 # Legal values: "GDB" "None"
1728 # HAL interrupt handling
1729 # A number of configuration options related to interrupt
1730 # handling are common to most or all HAL packages, even though
1731 # the implementations will vary from architecture to
1734 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1735 # There is no associated value.
1739 # Use separate stack for interrupts
1740 # When an interrupt occurs this interrupt can be handled either
1741 # on the current stack or on a separate stack maintained by the
1742 # HAL. Using a separate stack requires a small number of extra
1743 # instructions in the interrupt handling code, but it has the
1744 # advantage that it is no longer necessary to allow extra space
1745 # in every thread stack for the interrupt handlers. The amount
1746 # of extra space required depends on the interrupt handlers
1747 # that are being used.
1749 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1751 # No user value, uncomment the following line to provide one.
1753 # The inferred value should not be edited directly.
1755 # value_source inferred
1758 # The following properties are affected by this value
1759 # package CYGPKG_REDBOOT
1760 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1763 # Interrupt stack size
1764 # This configuration option specifies the stack size in bytes
1765 # for the interrupt stack. Typically this should be a multiple
1766 # of 16, but the exact requirements will vary from architecture
1767 # to architecture. The interrupt stack serves two separate
1768 # purposes. It is used as the stack during system
1769 # initialization. In addition, if the interrupt system is
1770 # configured to use a separate stack then all interrupts will
1771 # be processed on this stack. The exact memory requirements
1772 # will vary from application to application, and will depend
1773 # heavily on whether or not other interrupt-related options,
1774 # for example nested interrupts, are enabled. On most targets,
1775 # in a configuration with no kernel this stack will also be
1776 # the stack used to invoke the application, and must obviously
1777 # be appropriately large in that case.
1779 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1781 # No user value, uncomment the following line to provide one.
1783 # value_source default
1784 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1785 # CYGPKG_KERNEL (unknown) == 0
1787 # Legal values: 128 to 1048576
1790 # Allow nested interrupts
1791 # When an interrupt occurs the HAL interrupt handling code can
1792 # either leave interrupts disabled for the duration of the
1793 # interrupt handling code, or by doing some extra work it can
1794 # reenable interrupts before invoking the interrupt handler and
1795 # thus allow nested interrupts to happen. If all the interrupt
1796 # handlers being used are small and do not involve any loops
1797 # then it is usually better to disallow nested interrupts.
1798 # However if any of the interrupt handlers are more complicated
1799 # than nested interrupts will usually be required.
1801 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1803 # No user value, uncomment the following line to provide one.
1805 # value_source default
1809 # Save minimum context on interrupt
1810 # The HAL interrupt handling code can exploit the calling conventions
1811 # defined for a given architecture to reduce the amount of state
1812 # that has to be saved. Generally this improves performance and
1813 # reduces code size. However it can make source-level debugging
1816 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1818 # No user value, uncomment the following line to provide one.
1820 # The inferred value should not be edited directly.
1822 # value_source inferred
1825 # The following properties are affected by this value
1826 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1827 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1828 # component CYGBLD_BUILD_REDBOOT
1829 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1832 # Chain all interrupts together
1833 # Interrupts can be attached to vectors either singly, or be
1834 # chained together. The latter is necessary if there is no way
1835 # of discovering which device has interrupted without
1836 # inspecting the device itself. It can also reduce the amount
1837 # of RAM needed for interrupt decoding tables and code.
1839 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1841 # No user value, uncomment the following line to provide one.
1843 # value_source default
1847 # Ignore spurious [fleeting] interrupts
1848 # On some hardware, interrupt sources may not be de-bounced or
1849 # de-glitched. Rather than try to handle these interrupts (no
1850 # handling may be possible), this option allows the HAL to simply
1851 # ignore them. In most cases, if the interrupt is real it will
1852 # reoccur in a detectable form.
1854 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1856 # No user value, uncomment the following line to provide one.
1858 # value_source default
1863 # HAL context switch support
1864 # A number of configuration options related to thread contexts
1865 # are common to most or all HAL packages, even though the
1866 # implementations will vary from architecture to architecture.
1868 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1869 # There is no associated value.
1871 # The following properties are affected by this value
1875 # Use minimum thread context
1876 # The thread context switch code can exploit the calling
1877 # conventions defined for a given architecture to reduce the
1878 # amount of state that has to be saved during a context
1879 # switch. Generally this improves performance and reduces
1880 # code size. However it can make source-level debugging more
1883 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1885 # No user value, uncomment the following line to provide one.
1887 # The inferred value should not be edited directly.
1889 # value_source inferred
1892 # The following properties are affected by this value
1893 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1894 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1895 # component CYGBLD_BUILD_REDBOOT
1896 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1900 # Explicit control over cache behaviour
1901 # These options let the default behaviour of the caches
1902 # be easily configurable.
1904 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1905 # There is no associated value.
1909 # Enable DATA cache on startup
1910 # Enabling this option will cause the data cache to be enabled
1911 # as soon as practicable when eCos starts up. One would choose
1912 # to disable this if the data cache cannot safely be turned on,
1913 # such as a case where the cache(s) require additional platform
1916 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1918 # No user value, uncomment the following line to provide one.
1920 # value_source default
1925 # DATA cache mode on startup
1926 # This option controls the mode the cache will be set to
1927 # when enabled on startup.
1929 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1931 # No user value, uncomment the following line to provide one.
1932 # user_value COPYBACK
1933 # value_source default
1934 # Default value: COPYBACK
1935 # Legal values: "COPYBACK" "WRITETHRU"
1939 # Enable INSTRUCTION cache on startup
1940 # Enabling this option will cause the instruction cache to be enabled
1941 # as soon as practicable when eCos starts up. One would choose
1942 # to disable this if the instruction cache cannot safely be turned on,
1943 # such as a case where the cache(s) require additional platform
1946 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1948 # No user value, uncomment the following line to provide one.
1950 # value_source default
1955 # Source-level debugging support
1956 # If the source level debugger gdb is to be used for debugging
1957 # application code then it may be necessary to configure in support
1958 # for this in the HAL.
1960 cdl_component CYGPKG_HAL_DEBUG {
1961 # There is no associated value.
1965 # Support for GDB stubs
1966 # The HAL implements GDB stubs for the target.
1968 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1969 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
1970 # This value cannot be modified here.
1974 # The following properties are affected by this value
1975 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1976 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1977 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1978 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1981 # Include GDB stubs in HAL
1982 # This option causes a set of GDB stubs to be included into the
1983 # system. On some target systems the GDB support will be
1984 # provided by other means, for example by a ROM monitor. On
1985 # other targets, especially when building a ROM-booting system,
1986 # the necessary support has to go into the target library
1987 # itself. When GDB stubs are include in a configuration, HAL
1988 # serial drivers must also be included.
1990 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1991 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1992 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1996 # No user value, uncomment the following line to provide one.
1998 # The inferred value should not be edited directly.
2000 # value_source inferred
2002 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2003 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2005 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2006 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2008 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2009 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2011 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2013 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2016 # The following properties are affected by this value
2017 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2018 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2019 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2022 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2024 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2025 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2026 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2027 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2028 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2029 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2030 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2031 # option CYGPKG_HAL_GDB_FILEIO
2032 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2033 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2034 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2035 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2036 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2037 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2038 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2041 # Support for external break support in GDB stubs
2042 # The HAL implements external break (or asynchronous interrupt)
2043 # in the GDB stubs for the target.
2045 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2046 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2047 # This value cannot be modified here.
2051 # The following properties are affected by this value
2052 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2053 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2056 # Include GDB external break support for stubs
2057 # This option causes the GDB stub to add a serial interrupt handler
2058 # which will listen for GDB break packets. This lets you stop the
2059 # target asynchronously when using GDB, usually by hitting Control+C
2060 # or pressing the STOP button. This option differs from
2061 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2062 # GDB stubs are present.
2064 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2065 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2066 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2070 # No user value, uncomment the following line to provide one.
2072 # value_source default
2073 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2074 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2076 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2077 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2080 # The following properties are affected by this value
2081 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2082 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2083 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2084 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2085 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2086 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2089 # Platform does not support CTRLC
2091 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2092 # No options implement this inferface
2093 # This value cannot be modified here.
2097 # The following properties are affected by this value
2098 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2099 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2102 # Include GDB external break support when no stubs
2103 # This option adds an interrupt handler for the GDB serial line
2104 # which will listen for GDB break packets. This lets you stop the
2105 # target asynchronously when using GDB, usually by hitting Control+C
2106 # or pressing the STOP button. This option differs from
2107 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2108 # stubs are NOT present.
2110 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2111 # This option is not active
2112 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2113 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2114 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2116 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2117 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2121 # No user value, uncomment the following line to provide one.
2123 # value_source default
2124 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2125 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2127 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2128 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2131 # The following properties are affected by this value
2132 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2133 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2134 # component CYGBLD_BUILD_REDBOOT
2135 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2138 # Include GDB multi-threading debug support
2139 # This option enables some extra HAL code which is needed
2140 # to support multi-threaded source level debugging.
2142 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2143 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2144 # CYGSEM_HAL_ROM_MONITOR == 1
2145 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2149 # No user value, uncomment the following line to provide one.
2151 # value_source default
2154 # The following properties are affected by this value
2155 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2156 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2157 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2158 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2161 # Number of times to retry sending a $O packet
2162 # This option controls the number of attempts that eCos programs
2163 # will make to send a $O packet to a host GDB process. If it is
2164 # set non-zero, then the target process will attempt to resend the
2165 # $O packet data up to this number of retries. Caution: use of
2166 # this option is not recommended as it can thoroughly confuse the
2169 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2171 # No user value, uncomment the following line to provide one.
2173 # value_source default
2177 # Timeout period for GDB packets
2178 # This option controls the time (in milliseconds) that eCos programs
2179 # will wait for a response when sending packets to a host GDB process.
2180 # If this time elapses, then the packet will be resent, up to some
2181 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2183 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2185 # No user value, uncomment the following line to provide one.
2187 # value_source default
2188 # Default value: 500
2191 # Location of CRC32 table
2192 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2193 # and placed in ROM, or generated at runtime in RAM. Depending on
2194 # your memory constraints, one of these options may be better.
2196 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2198 # No user value, uncomment the following line to provide one.
2200 # value_source default
2201 # Default value: RAM
2202 # Legal values: "ROM" "RAM"
2206 # ROM monitor support
2207 # Support for ROM monitors can be built in to your application.
2208 # It may also be relevant to build your application as a ROM monitor
2209 # itself. Such options are contained here if relevant for your chosen
2210 # platform. The options and ROM monitors available to choose are
2211 # platform-dependent.
2213 cdl_component CYGPKG_HAL_ROM_MONITOR {
2214 # There is no associated value.
2216 # The following properties are affected by this value
2220 # Target has virtual vector support
2222 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2223 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2224 # This value cannot be modified here.
2228 # The following properties are affected by this value
2229 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2230 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2233 # Target supports baud rate control via vectors
2234 # Whether this target supports the __COMMCTL_GETBAUD
2235 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2237 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2238 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2239 # This value cannot be modified here.
2243 # The following properties are affected by this value
2244 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2245 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2248 # Enable use of virtual vector calling interface
2249 # Virtual vector support allows the HAL to let the ROM
2250 # monitor handle certain operations. The virtual vector table
2251 # defines a calling interface between applications running in
2252 # RAM and the ROM monitor.
2254 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2255 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2256 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2259 # Calculated value: 1
2263 # The following properties are affected by this value
2264 # component CYGBLD_BUILD_REDBOOT
2265 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2266 # package CYGPKG_DEVS_ETH_PHY
2267 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2271 # Inherit console settings from ROM monitor
2272 # When this option is set, the application will inherit
2273 # the console as set up by the ROM monitor. This means
2274 # that the application will use whatever channel and
2275 # mangling style was used by the ROM monitor when
2276 # the application was launched.
2278 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2279 # This option is not active
2280 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2281 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2285 # No user value, uncomment the following line to provide one.
2287 # value_source default
2288 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2289 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2294 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2295 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2296 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2299 # Debug channel is configurable
2300 # This option is a configuration hint - it is enabled
2301 # when the HAL initialization code will make use
2302 # of the debug channel configuration option.
2304 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2305 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2306 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2310 # The following properties are affected by this value
2311 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2312 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2315 # Console channel is configurable
2316 # This option is a configuration hint - it is enabled
2317 # when the HAL initialization code will make use
2318 # of the console channel configuration option.
2320 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2321 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2322 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2323 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2327 # The following properties are affected by this value
2328 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2329 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2332 # Initialize whole of virtual vector table
2333 # This option will cause the whole of the virtual
2334 # vector table to be initialized with dummy values on
2335 # startup. When this option is enabled, all the
2336 # options below must also be enabled - or the
2337 # table would be empty when the application
2339 # On targets where older ROM monitors without
2340 # virtual vector support may still be in use, it is
2341 # necessary for RAM applictions to initialize the
2342 # table (since all HAL diagnostics and debug IO
2343 # happens via the table).
2345 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2347 # No user value, uncomment the following line to provide one.
2349 # value_source default
2350 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2351 # CYG_HAL_STARTUP == ROMRAM
2352 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2354 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2355 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2357 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2358 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2360 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2361 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2363 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2366 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2367 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2370 # The following properties are affected by this value
2371 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2372 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2373 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2374 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2375 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2376 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2377 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2378 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2379 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2380 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2381 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2382 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2383 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2384 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2387 # Claim virtual vector table entries by default
2388 # By default most virtual vectors will be claimed by
2389 # RAM startup configurations, meaning that the RAM
2390 # application will provide the services. The
2391 # exception is COMMS support (HAL
2392 # diagnostics/debugging IO) which is left in the
2393 # control of the ROM monitor.
2394 # The reasoning behind this is to get as much of the
2395 # code exercised during regular development so it
2396 # is known to be working the few times a new ROM
2397 # monitor or a ROM production configuration is used
2398 # - COMMS are excluded only by necessity in order to
2399 # avoid breaking an existing debugger connections
2400 # (there may be ways around this).
2401 # For production RAM configurations this option can
2402 # be switched off, causing the appliction to rely on
2403 # the ROM monitor for these services, thus
2404 # saving some space.
2405 # Individual vectors may also be left unclaimed,
2406 # controlled by the below options (meaning that the
2407 # associated service provided by the ROM monitor
2410 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2411 # This option is not active
2412 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2413 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2417 # No user value, uncomment the following line to provide one.
2419 # value_source default
2422 # The following properties are affected by this value
2423 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2424 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2426 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2427 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2428 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2429 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2430 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2433 # Claim reset virtual vectors
2434 # This option will cause the reset and kill_by_reset
2435 # virtual vectors to be claimed.
2437 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2439 # No user value, uncomment the following line to provide one.
2441 # value_source default
2442 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2447 # The following properties are affected by this value
2448 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2449 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2452 # Claim version virtual vectors
2453 # This option will cause the version
2454 # virtual vectors to be claimed.
2456 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2458 # No user value, uncomment the following line to provide one.
2460 # value_source default
2461 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2462 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2466 # Claim delay_us virtual vector
2467 # This option will cause the delay_us
2468 # virtual vector to be claimed.
2470 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2472 # No user value, uncomment the following line to provide one.
2474 # value_source default
2475 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2480 # The following properties are affected by this value
2481 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2482 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2485 # Claim cache virtual vectors
2486 # This option will cause the cache virtual vectors
2489 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2491 # No user value, uncomment the following line to provide one.
2493 # value_source default
2494 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2496 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2499 # The following properties are affected by this value
2500 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2501 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2504 # Claim data virtual vectors
2505 # This option will cause the data virtual vectors
2506 # to be claimed. At present there is only one, used
2507 # by the RedBoot ethernet driver to share diag output.
2509 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2511 # No user value, uncomment the following line to provide one.
2513 # value_source default
2514 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2516 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2519 # The following properties are affected by this value
2520 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2521 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2524 # Claim comms virtual vectors
2525 # This option will cause the communication tables
2526 # that are part of the virtual vectors mechanism to
2527 # be claimed. Note that doing this may cause an
2528 # existing ROM monitor communication connection to
2529 # be closed. For this reason, the option is disabled
2530 # per default for normal application
2533 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2535 # No user value, uncomment the following line to provide one.
2537 # value_source default
2538 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2539 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2540 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2543 # The following properties are affected by this value
2544 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2545 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2546 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2547 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2548 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2549 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2550 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2551 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # Do diagnostic IO via virtual vector table
2555 # All HAL IO happens via the virtual vector table / comm
2556 # tables when those tables are supported by the HAL.
2557 # If so desired, the low-level IO functions can
2558 # still be provided by the RAM application by
2559 # enabling the CLAIM_COMMS option.
2561 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2562 # Calculated value: 1
2566 # The following properties are affected by this value
2567 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2568 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2569 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2570 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2574 # Behave as a ROM monitor
2575 # Enable this option if this program is to be used as a ROM monitor,
2576 # i.e. applications will be loaded into RAM on the TX27 module, and this
2577 # ROM monitor may process exceptions or interrupts generated from the
2578 # application. This enables features such as utilizing a separate
2579 # interrupt stack when exceptions are generated.
2581 cdl_option CYGSEM_HAL_ROM_MONITOR {
2583 # No user value, uncomment the following line to provide one.
2585 # The inferred value should not be edited directly.
2587 # value_source inferred
2589 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2590 # CYG_HAL_STARTUP == ROMRAM
2591 # CYG_HAL_STARTUP == ROMRAM
2594 # The following properties are affected by this value
2595 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2596 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2597 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2598 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2599 # option CYGPRI_REDBOOT_ROM_MONITOR
2600 # Requires: CYGSEM_HAL_ROM_MONITOR
2603 # Work with a ROM monitor
2604 # Support can be enabled for different varieties of ROM monitor.
2605 # This support changes various eCos semantics such as the encoding
2606 # of diagnostic output, or the overriding of hardware interrupt
2608 # Firstly there is "Generic" support which prevents the HAL
2609 # from overriding the hardware vectors that it does not use, to
2610 # instead allow an installed ROM monitor to handle them. This is
2611 # the most basic support which is likely to be common to most
2612 # implementations of ROM monitor.
2613 # "GDB_stubs" provides support when GDB stubs are included in
2614 # the ROM monitor or boot ROM.
2616 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2618 # No user value, uncomment the following line to provide one.
2620 # value_source default
2621 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2622 # CYG_HAL_STARTUP == ROMRAM
2624 # Legal values: "Generic" "GDB_stubs"
2625 # Requires: CYG_HAL_STARTUP == "RAM"
2626 # CYG_HAL_STARTUP == ROMRAM
2629 # The following properties are affected by this value
2630 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2631 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2632 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2633 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2634 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2635 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2636 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2637 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2641 # Platform defined I/O channels.
2642 # Platforms which provide additional I/O channels can implement
2643 # this interface, indicating that the function plf_if_init()
2644 # needs to be called.
2646 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2647 # No options implement this inferface
2648 # This value cannot be modified here.
2653 # Platform IDE I/O support.
2654 # Platforms which provide IDE controllers can implement
2655 # this interface, indicating that IDE I/O macros are
2658 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2659 # No options implement this inferface
2660 # This value cannot be modified here.
2664 # The following properties are affected by this value
2665 # component CYGSEM_REDBOOT_DISK_IDE
2666 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2669 # File I/O operations via GDB
2670 # This option enables support for various file I/O
2671 # operations using the GDB remote protocol to communicate
2672 # with GDB. The operations are then performed on the
2673 # debugging host by proxy. These operations are only
2674 # currently available by using a system call interface
2675 # to RedBoot. This may change in the future.
2677 cdl_option CYGPKG_HAL_GDB_FILEIO {
2678 # This option is not active
2679 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2680 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2684 # No user value, uncomment the following line to provide one.
2686 # value_source default
2688 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2689 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2693 # Build Compiler sanity checking tests
2694 # Enabling this option causes compiler tests to be built.
2696 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2698 # No user value, uncomment the following line to provide one.
2700 # value_source default
2703 # The following properties are affected by this value
2704 # component CYGPKG_HAL_TESTS
2705 # Calculated: "tests/context tests/basic"
2706 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2707 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2708 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2712 # This option specifies the set of tests for the common HAL.
2714 cdl_component CYGPKG_HAL_TESTS {
2715 # Calculated value: "tests/context tests/basic"
2716 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2717 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2718 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2719 # CYGINT_HAL_TESTS_NO_CACHES == 0
2720 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2721 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2723 # Current_value: tests/context tests/basic tests/cache tests/intr
2727 # Interface for cache presence
2728 # Some architectures and/or platforms do not have caches. By
2729 # implementing this interface, these can disable the various
2730 # cache-related tests.
2732 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2733 # No options implement this inferface
2734 # This value cannot be modified here.
2736 # Current value: 0 0
2738 # The following properties are affected by this value
2739 # component CYGPKG_HAL_TESTS
2740 # Calculated: "tests/context tests/basic"
2741 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2742 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2743 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2748 # The ARM architecture HAL package provides generic
2749 # support for this processor architecture. It is also
2750 # necessary to select a specific target platform HAL
2753 cdl_package CYGPKG_HAL_ARM {
2754 # Packages cannot be added or removed, nor can their version be changed,
2755 # simply by editing their value. Instead the appropriate configuration
2756 # should be used to perform these actions.
2758 # This value cannot be modified here.
2760 # Current value: 1 current
2762 # The following properties are affected by this value
2763 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2764 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2765 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2766 # ActiveIf: CYGPKG_HAL_ARM
2770 # The CPU architecture supports THUMB mode
2772 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2773 # No options implement this inferface
2774 # This value cannot be modified here.
2778 # The following properties are affected by this value
2779 # option CYGHWR_THUMB
2780 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2781 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2782 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2785 # Enable Thumb instruction set
2786 # Enable use of the Thumb instruction set.
2788 cdl_option CYGHWR_THUMB {
2789 # This option is not active
2790 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2791 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2795 # No user value, uncomment the following line to provide one.
2797 # value_source default
2800 # The following properties are affected by this value
2801 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2802 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # Enable Thumb interworking compiler option
2806 # This option controls the use of -mthumb-interwork in the
2807 # compiler flags. It defaults enabled in Thumb or ROM monitor
2808 # configurations, but can be overridden for reduced memory
2809 # footprint where interworking is not a requirement.
2811 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2812 # This option is not active
2813 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2814 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2818 # No user value, uncomment the following line to provide one.
2820 # value_source default
2821 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2823 # CYGSEM_HAL_ROM_MONITOR == 1
2827 # The platform and architecture supports Big Endian operation
2829 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2830 # No options implement this inferface
2831 # This value cannot be modified here.
2835 # The following properties are affected by this value
2836 # option CYGHWR_HAL_ARM_BIGENDIAN
2837 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2840 # Use big-endian mode
2841 # Use the CPU in big-endian mode.
2843 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2844 # This option is not active
2845 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2846 # CYGINT_HAL_ARM_BIGENDIAN == 0
2850 # No user value, uncomment the following line to provide one.
2852 # value_source default
2856 # The platform uses a processor with an ARM7 core
2858 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2859 # No options implement this inferface
2860 # This value cannot be modified here.
2864 # The following properties are affected by this value
2865 # option CYGHWR_HAL_ARM_CPU_FAMILY
2866 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2867 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2868 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2869 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2871 # option CYGHWR_HAL_ARM_CPU_FAMILY
2872 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2873 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2874 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2875 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2879 # The platform uses a processor with an ARM9 core
2881 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2882 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2883 # This value cannot be modified here.
2887 # The following properties are affected by this value
2888 # option CYGHWR_HAL_ARM_CPU_FAMILY
2889 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2890 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2891 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2892 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2894 # option CYGHWR_HAL_ARM_CPU_FAMILY
2895 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2896 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2897 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2898 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2902 # The platform uses a processor with a StrongARM core
2904 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2905 # No options implement this inferface
2906 # This value cannot be modified here.
2910 # The following properties are affected by this value
2911 # option CYGHWR_HAL_ARM_CPU_FAMILY
2912 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2913 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2914 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2915 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2917 # option CYGHWR_HAL_ARM_CPU_FAMILY
2918 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2919 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2920 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2921 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2925 # The platform uses a processor with a XScale core
2927 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2928 # No options implement this inferface
2929 # This value cannot be modified here.
2933 # The following properties are affected by this value
2934 # option CYGHWR_HAL_ARM_CPU_FAMILY
2935 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2936 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2937 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2938 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2940 # option CYGHWR_HAL_ARM_CPU_FAMILY
2941 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2942 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2943 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2944 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2949 # It is possible to optimize code for different
2950 # ARM CPU families. This option selects which CPU to
2951 # optimize for on boards that support multiple CPU types.
2953 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2955 # No user value, uncomment the following line to provide one.
2957 # value_source default
2958 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2959 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2960 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2961 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2963 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2964 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2965 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2966 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2968 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2969 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2970 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2971 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2973 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2974 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2975 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2976 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2979 # Provide diagnostic dump for exceptions
2980 # Print messages about hardware exceptions, including
2981 # raw exception frame dump and register contents.
2983 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2985 # No user value, uncomment the following line to provide one.
2987 # value_source default
2989 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2990 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2994 # Process all exceptions with the eCos application
2995 # Normal RAM-based programs which do not include GDB stubs
2996 # defer processing of the illegal instruction exception to GDB.
2997 # Setting this options allows the program to explicitly handle
2998 # the illegal instruction exception itself. Note: this will
2999 # prevent the use of GDB to debug the application as breakpoints
3000 # will no longer work.
3002 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3004 # No user value, uncomment the following line to provide one.
3006 # value_source default
3010 # Support GDB thread operations via ICE/Multi-ICE
3011 # Allow GDB to get thread information via the ICE/Multi-ICE
3014 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3016 # No user value, uncomment the following line to provide one.
3018 # value_source default
3020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3021 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3023 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3026 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3027 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3031 # Support for 'gprof' callbacks
3032 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3033 # to acquire the interrupt-context PC and SP, when this option is
3036 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3037 # This option is not active
3038 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3039 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3041 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3042 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3043 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3046 # Calculated value: 1
3051 # Accept exceptions and irq's occurring in user mode
3052 # For standalone Redboot based programs running in user mode.
3054 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3056 # No user value, uncomment the following line to provide one.
3058 # value_source default
3062 # Preserve svc spsr before returning to svc mode
3063 # This option secures exception and breakpoint processing
3064 # triggered during execution of application specific SWI
3067 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3069 # No user value, uncomment the following line to provide one.
3071 # value_source default
3077 cdl_option CYGBLD_LINKER_SCRIPT {
3078 # Calculated value: "src/arm.ld"
3080 # Current_value: src/arm.ld
3083 # Implementations of hal_arm_mem_real_region_top()
3085 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3086 # No options implement this inferface
3087 # This value cannot be modified here.
3092 # Freescale SoC architecture
3093 # This HAL variant package provides generic
3094 # support for the Freescale SoC. It is also
3095 # necessary to select a specific target platform HAL
3098 cdl_package CYGPKG_HAL_ARM_MX27 {
3099 # Packages cannot be added or removed, nor can their version be changed,
3100 # simply by editing their value. Instead the appropriate configuration
3101 # should be used to perform these actions.
3103 # This value cannot be modified here.
3105 # Current value: 1 current
3107 # The following properties are affected by this value
3112 # The processor can run at various frequencies.
3113 # These values are expressed in KHz. Note that there are
3114 # several steppings of the rate to run at different
3115 # maximum frequencies. Check the specs to make sure that your
3116 # particular processor can run at the rate you select here.
3118 cdl_option CYGHWR_HAL_ARM_SOC_PLL_REF_CLOCK {
3120 # No user value, uncomment the following line to provide one.
3121 # user_value 26000000
3122 # value_source default
3123 # Default value: 26000000
3124 # Legal values: 26000000 27000000 33554432 32768000
3127 # Processor clock rate
3128 # The processor can run at various frequencies.
3129 # These values are expressed in KHz. Note that there are
3130 # several steppings of the rate to run at different
3131 # maximum frequencies. Check the specs to make sure that your
3132 # particular processor can run at the rate you select here.
3134 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3136 # No user value, uncomment the following line to provide one.
3138 # value_source default
3139 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3140 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 399
3141 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3142 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3144 # Legal values: 266 399
3147 # System clock (hclk) rate
3148 # The processor can run at various frequencies.
3149 # These values are expressed in KHz. Note that there are
3150 # several steppings of the rate to run at different
3151 # maximum frequencies. Check the specs to make sure that your
3152 # particular processor can run at the rate you select here.
3154 cdl_option CYGHWR_HAL_ARM_SOC_SYSTEM_CLOCK {
3156 # No user value, uncomment the following line to provide one.
3158 # value_source default
3159 # Default value: 133
3160 # Legal values: 133 100
3163 # Real-time clock constants
3165 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3166 # There is no associated value.
3170 # Real-time clock numerator
3172 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3173 # Calculated value: 1000000000
3175 # Current_value: 1000000000
3178 # Real-time clock denominator
3179 # This option selects the heartbeat rate for the real-time clock.
3180 # The rate is specified in ticks per second. Change this value
3181 # with caution - too high and your system will become saturated
3182 # just handling clock interrupts, too low and some operations
3183 # such as thread scheduling may become sluggish.
3185 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3187 # No user value, uncomment the following line to provide one.
3189 # value_source default
3190 # Default value: 100
3192 # The following properties are affected by this value
3193 # option CYGNUM_HAL_RTC_PERIOD
3194 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3197 # Real-time clock period
3199 cdl_option CYGNUM_HAL_RTC_PERIOD {
3200 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3201 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3203 # Current_value: 36864
3207 # UART1 available as diagnostic/debug channel
3208 # The chip has multiple serial channels which may be
3209 # used for different things on different platforms. This
3210 # interface allows a platform to indicate that the specified
3211 # serial port can be used as a diagnostic and/or debug channel.
3213 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3214 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3215 # This value cannot be modified here.
3219 # The following properties are affected by this value
3222 # UART2 available as diagnostic/debug channel
3223 # The chip has multiple serial channels which may be
3224 # used for different things on different platforms. This
3225 # interface allows a platform to indicate that the specified
3226 # serial port can be used as a diagnostic and/or debug channel.
3228 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3229 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3230 # This value cannot be modified here.
3234 # The following properties are affected by this value
3237 # UART3 available as diagnostic/debug channel
3238 # The chip has multiple serial channels which may be
3239 # used for different things on different platforms. This
3240 # interface allows a platform to indicate that the specified
3241 # serial port can be used as a diagnostic and/or debug channel.
3243 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3244 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3245 # This value cannot be modified here.
3249 # The following properties are affected by this value
3252 # UART4 available as diagnostic/debug channel
3253 # The chip has multiple serial channels which may be
3254 # used for different things on different platforms. This
3255 # interface allows a platform to indicate that the specified
3256 # serial port can be used as a diagnostic and/or debug channel.
3258 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3259 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3260 # This value cannot be modified here.
3264 # The following properties are affected by this value
3267 # UART5 available as diagnostic/debug channel
3268 # The chip has multiple serial channels which may be
3269 # used for different things on different platforms. This
3270 # interface allows a platform to indicate that the specified
3271 # serial port can be used as a diagnostic and/or debug channel.
3273 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3274 # No options implement this inferface
3275 # This value cannot be modified here.
3280 # UART6 available as diagnostic/debug channel
3281 # The chip has multiple serial channels which may be
3282 # used for different things on different platforms. This
3283 # interface allows a platform to indicate that the specified
3284 # serial port can be used as a diagnostic and/or debug channel.
3286 cdl_interface CYGHWR_HAL_ARM_SOC_UART6 {
3287 # No options implement this inferface
3288 # This value cannot be modified here.
3294 # This HAL platform package provides generic
3295 # support for the Ka-Ro electronics TX27 module.
3297 cdl_package CYGPKG_HAL_ARM_TX27KARO {
3298 # Packages cannot be added or removed, nor can their version be changed,
3299 # simply by editing their value. Instead the appropriate configuration
3300 # should be used to perform these actions.
3302 # This value cannot be modified here.
3304 # Current value: 1 current
3305 # Requires: CYGINT_ISO_CTYPE
3306 # CYGINT_ISO_CTYPE == 1
3308 # Requires: CYGBLD_BUILD_REDBOOT == 1
3309 # CYGBLD_BUILD_REDBOOT == 1
3315 # The only startup type allowed is ROMRAM, since this will allow
3316 # the program to exist in ROM, but be copied to RAM during startup
3317 # which is required to boot from NAND flash.
3319 cdl_component CYG_HAL_STARTUP {
3321 # No user value, uncomment the following line to provide one.
3323 # value_source default
3324 # Default value: ROMRAM
3325 # Legal values: "ROMRAM"
3327 # The following properties are affected by this value
3328 # option CYGSEM_HAL_ROM_MONITOR
3329 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3330 # option CYGSEM_HAL_ROM_MONITOR
3331 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3332 # option CYGSEM_HAL_USE_ROM_MONITOR
3333 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3334 # option CYGSEM_HAL_USE_ROM_MONITOR
3335 # Requires: CYG_HAL_STARTUP == "RAM"
3336 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3337 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3338 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3339 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3340 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3341 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3342 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3343 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3344 # option CYGPRI_REDBOOT_ROM_MONITOR
3345 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3346 # option CYGPRI_REDBOOT_ROM_MONITOR
3347 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3350 # Diagnostic serial port baud rate
3351 # This option selects the baud rate used for the console port.
3352 # Note: this should match the value chosen for the GDB port if the
3353 # console and GDB port are the same.
3355 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3357 # No user value, uncomment the following line to provide one.
3359 # value_source default
3360 # Default value: 115200
3361 # Legal values: 9600 19200 38400 57600 115200
3364 # GDB serial port baud rate
3365 # This option selects the baud rate used for the GDB port.
3366 # Note: this should match the value chosen for the console port if the
3367 # console and GDB port are the same.
3369 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3371 # No user value, uncomment the following line to provide one.
3373 # value_source default
3374 # Default value: 115200
3375 # Legal values: 9600 19200 38400 57600 115200
3378 # Number of communication channels on the TX27
3380 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3381 # Calculated value: 3
3385 # The following properties are affected by this value
3386 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3387 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3388 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3389 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3390 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3391 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3395 # The TX27 provides access to three serial ports. This option
3396 # chooses which port will be used to connect to a host
3399 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3400 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3401 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3405 # No user value, uncomment the following line to provide one.
3407 # value_source default
3409 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3410 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3413 # Default console channel.
3415 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3416 # Calculated value: 0
3419 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3420 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3422 # The following properties are affected by this value
3423 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3424 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3427 # Console serial port
3428 # The TX27 provides access to three serial ports. This option
3429 # chooses which port will be used for console output.
3431 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3432 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3433 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3437 # No user value, uncomment the following line to provide one.
3439 # value_source default
3440 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3441 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3443 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3444 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3447 # Ka-Ro electronics TX27 module build options
3448 # Package specific build options including control over
3449 # compiler flags used only in building this package,
3450 # and details of which tests are built.
3452 cdl_component CYGPKG_HAL_ARM_TX27_OPTIONS {
3453 # There is no associated value.
3454 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3455 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3461 # This option specifies the SDRAM size of the TX27 module.
3463 cdl_option CYGNUM_HAL_ARM_TX27_SDRAM_SIZE {
3465 # No user value, uncomment the following line to provide one.
3466 # user_value 0x04000000
3467 # value_source default
3468 # Default value: 0x04000000
3469 # Legal values: 0x04000000 0x08000000
3472 # Enable low level debugging with LED
3473 # This option enables low level debugging by blink codes
3474 # of the LED on STK5.
3476 cdl_option CYGOPT_HAL_ARM_TX27_DEBUG {
3478 # No user value, uncomment the following line to provide one.
3480 # value_source default
3481 # Default value: false
3482 # false (unknown) == 0
3486 # Additional compiler flags
3487 # This option modifies the set of compiler flags for
3488 # building the TX27 HAL. These flags are used in addition
3489 # to the set of global flags.
3491 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_ADD {
3493 # No user value, uncomment the following line to provide one.
3495 # value_source default
3499 # Suppressed compiler flags
3500 # This option modifies the set of compiler flags for
3501 # building the TX27 HAL. These flags are removed from
3502 # the set of global flags if present.
3504 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_REMOVE {
3506 # No user value, uncomment the following line to provide one.
3508 # value_source default
3515 cdl_component CYGHWR_MEMORY_LAYOUT {
3516 # Calculated value: "arm_tx27_romram"
3518 # Current_value: arm_tx27_romram
3522 # Memory layout linker script fragment
3524 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3525 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.ldi>"
3527 # Current_value: <pkgconf/mlt_arm_tx27_romram.ldi>
3530 # Memory layout header file
3532 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3533 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.h>"
3535 # Current_value: <pkgconf/mlt_arm_tx27_romram.h>
3544 # Common types and useful macros.
3545 # Tracing and assertion facilities.
3546 # Package startup options.
3548 cdl_package CYGPKG_INFRA {
3549 # Packages cannot be added or removed, nor can their version be changed,
3550 # simply by editing their value. Instead the appropriate configuration
3551 # should be used to perform these actions.
3553 # This value cannot be modified here.
3555 # Current value: 1 current
3557 # The following properties are affected by this value
3558 # package CYGPKG_HAL
3559 # Requires: CYGPKG_INFRA
3560 # component CYGBLD_BUILD_REDBOOT
3561 # Requires: CYGPKG_INFRA
3566 # The eCos source code contains a significant amount of
3567 # internal debugging support, in the form of assertions and
3569 # Assertions check at runtime that various conditions are as
3570 # expected; if not, execution is halted.
3571 # Tracing takes the form of text messages that are output
3572 # whenever certain events occur, or whenever functions are
3574 # The most important property of these checks and messages is
3575 # that they are not required for the program to run.
3576 # It is prudent to develop software with assertions enabled,
3577 # but disable them when making a product release, thus
3578 # removing the overhead of that checking.
3579 # It is possible to enable assertions and tracing
3581 # There are also options controlling the exact behaviour of
3582 # the assertion and tracing facilities, thus giving users
3583 # finer control over the code and data size requirements.
3585 cdl_component CYGPKG_INFRA_DEBUG {
3587 # No user value, uncomment the following line to provide one.
3589 # value_source default
3592 # The following properties are affected by this value
3593 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3594 # ActiveIf: CYGPKG_INFRA_DEBUG
3599 # If this option is defined, asserts in the code are tested.
3600 # Assert functions (CYG_ASSERT()) are defined in
3601 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3602 # If it is not defined, these result in no additional
3603 # object code and no checking of the asserted conditions.
3605 cdl_component CYGDBG_USE_ASSERTS {
3606 # This option is not active
3607 # The parent CYGPKG_INFRA_DEBUG is disabled
3610 # No user value, uncomment the following line to provide one.
3612 # value_source default
3614 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3615 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3618 # The following properties are affected by this value
3619 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3620 # Requires: CYGDBG_USE_ASSERTS
3621 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3622 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3627 # This option allows individual control of preconditions.
3628 # A precondition is one type of assert, which it is
3629 # useful to control separately from more general asserts.
3630 # The function is CYG_PRECONDITION(condition,msg).
3632 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3633 # This option is not active
3634 # The parent CYGDBG_USE_ASSERTS is not active
3637 # No user value, uncomment the following line to provide one.
3639 # value_source default
3644 # This option allows individual control of postconditions.
3645 # A postcondition is one type of assert, which it is
3646 # useful to control separately from more general asserts.
3647 # The function is CYG_POSTCONDITION(condition,msg).
3649 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3650 # This option is not active
3651 # The parent CYGDBG_USE_ASSERTS is not active
3654 # No user value, uncomment the following line to provide one.
3656 # value_source default
3661 # This option allows individual control of loop invariants.
3662 # A loop invariant is one type of assert, which it is
3663 # useful to control separately from more general asserts,
3664 # particularly since a loop invariant is typically evaluated
3665 # a great many times when used correctly.
3666 # The function is CYG_LOOP_INVARIANT(condition,msg).
3668 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3669 # This option is not active
3670 # The parent CYGDBG_USE_ASSERTS is not active
3673 # No user value, uncomment the following line to provide one.
3675 # value_source default
3680 # All assertions within eCos contain a text message
3681 # which should give some information about the condition
3683 # These text messages will end up being embedded in the
3684 # application image and hence there is a significant penalty
3685 # in terms of image size.
3686 # It is possible to suppress the use of these messages by
3687 # disabling this option.
3688 # This results in smaller code size, but there is less
3689 # human-readable information if an assertion actually gets
3692 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3693 # This option is not active
3694 # The parent CYGDBG_USE_ASSERTS is not active
3697 # No user value, uncomment the following line to provide one.
3699 # value_source default
3705 # If this option is defined, tracing operations
3706 # result in output or logging, depending on other options.
3707 # This may have adverse effects on performance, if the time
3708 # taken to output message overwhelms the available CPU
3709 # power or output bandwidth.
3710 # Trace functions (CYG_TRACE()) are defined in
3711 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3712 # If it is not defined, these result in no additional
3713 # object code and no trace information.
3715 cdl_component CYGDBG_USE_TRACING {
3716 # This option is not active
3717 # The parent CYGPKG_INFRA_DEBUG is disabled
3720 # No user value, uncomment the following line to provide one.
3722 # value_source default
3724 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3725 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3728 # The following properties are affected by this value
3729 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3730 # ActiveIf: CYGDBG_USE_TRACING
3731 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3732 # ActiveIf: CYGDBG_USE_TRACING
3733 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3734 # ActiveIf: CYGDBG_USE_TRACING
3735 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3736 # ActiveIf: CYGDBG_USE_TRACING
3737 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3738 # ActiveIf: CYGDBG_USE_TRACING
3742 # Trace function reports
3743 # This option allows individual control of
3744 # function entry/exit tracing, independent of
3745 # more general tracing output.
3746 # This may be useful to remove clutter from a
3749 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3750 # This option is not active
3751 # The parent CYGDBG_USE_TRACING is not active
3752 # The parent CYGDBG_USE_TRACING is disabled
3755 # No user value, uncomment the following line to provide one.
3757 # value_source default
3762 # All trace calls within eCos contain a text message
3763 # which should give some information about the circumstances.
3764 # These text messages will end up being embedded in the
3765 # application image and hence there is a significant penalty
3766 # in terms of image size.
3767 # It is possible to suppress the use of these messages by
3768 # disabling this option.
3769 # This results in smaller code size, but there is less
3770 # human-readable information available in the trace output,
3771 # possibly only filenames and line numbers.
3773 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3774 # This option is not active
3775 # The parent CYGDBG_USE_TRACING is not active
3776 # The parent CYGDBG_USE_TRACING is disabled
3779 # No user value, uncomment the following line to provide one.
3781 # value_source default
3786 # Trace output implementations
3788 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3789 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3790 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3791 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3792 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3793 # This option is not active
3794 # The parent CYGPKG_INFRA_DEBUG is disabled
3796 # This value cannot be modified here.
3800 # The following properties are affected by this value
3801 # component CYGDBG_USE_ASSERTS
3802 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3803 # component CYGDBG_USE_TRACING
3804 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3808 # A null output module which is useful when
3809 # debugging interactively; the output routines
3810 # can be breakpointed rather than have them actually
3811 # 'print' something.
3813 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3814 # This option is not active
3815 # The parent CYGPKG_INFRA_DEBUG is disabled
3818 # No user value, uncomment the following line to provide one.
3820 # value_source default
3825 # An output module which produces simple output
3826 # from tracing and assertion events.
3828 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3829 # This option is not active
3830 # The parent CYGPKG_INFRA_DEBUG is disabled
3833 # No user value, uncomment the following line to provide one.
3835 # value_source default
3840 # An output module which produces fancy output
3841 # from tracing and assertion events.
3843 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3844 # This option is not active
3845 # The parent CYGPKG_INFRA_DEBUG is disabled
3848 # No user value, uncomment the following line to provide one.
3850 # value_source default
3855 # An output module which buffers output
3856 # from tracing and assertion events. The stored
3857 # messages are output when an assert fires, or
3858 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3860 # Of course, there will only be stored messages
3861 # if tracing per se (CYGDBG_USE_TRACING)
3864 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3865 # This option is not active
3866 # The parent CYGPKG_INFRA_DEBUG is disabled
3869 # No user value, uncomment the following line to provide one.
3871 # value_source default
3877 # The size of the trace buffer. This counts the number
3878 # of trace records stored. When the buffer fills it
3879 # either wraps, stops recording, or generates output.
3881 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3882 # This option is not active
3883 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3884 # ActiveIf constraint: CYGDBG_USE_TRACING
3885 # CYGDBG_USE_TRACING == 0
3889 # No user value, uncomment the following line to provide one.
3891 # value_source default
3893 # Legal values: 5 to 65535
3896 # Wrap trace buffer when full
3897 # When the trace buffer has filled with records it
3898 # starts again at the beginning. Hence only the last
3899 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3902 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3903 # This option is not active
3904 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3905 # ActiveIf constraint: CYGDBG_USE_TRACING
3906 # CYGDBG_USE_TRACING == 0
3910 # No user value, uncomment the following line to provide one.
3912 # value_source default
3916 # Halt trace buffer when full
3917 # When the trace buffer has filled with records it
3918 # stops recording. Hence only the first
3919 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3922 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3923 # This option is not active
3924 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3925 # ActiveIf constraint: CYGDBG_USE_TRACING
3926 # CYGDBG_USE_TRACING == 0
3930 # No user value, uncomment the following line to provide one.
3932 # value_source default
3936 # Print trace buffer when full
3937 # When the trace buffer has filled with records it
3938 # prints the contents of the buffer. The buffer is then
3939 # emptied and the system continues.
3941 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3942 # This option is not active
3943 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3944 # ActiveIf constraint: CYGDBG_USE_TRACING
3945 # CYGDBG_USE_TRACING == 0
3949 # No user value, uncomment the following line to provide one.
3951 # value_source default
3955 # Print trace buffer on assert fail
3956 # When an assertion fails the trace buffer will be
3957 # printed to the default diagnostic device.
3959 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3960 # This option is not active
3961 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3962 # ActiveIf constraint: CYGDBG_USE_TRACING
3963 # CYGDBG_USE_TRACING == 0
3967 # No user value, uncomment the following line to provide one.
3969 # value_source default
3974 # Use function names
3975 # All trace and assert calls within eCos contain a
3976 # reference to the builtin macro '__PRETTY_FUNCTION__',
3977 # which evaluates to a string containing
3978 # the name of the current function.
3979 # This is useful when reading a trace log.
3980 # It is possible to suppress the use of the function name
3981 # by disabling this option.
3982 # This results in smaller code size, but there is less
3983 # human-readable information available in the trace output,
3984 # possibly only filenames and line numbers.
3986 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3987 # This option is not active
3988 # The parent CYGPKG_INFRA_DEBUG is disabled
3991 # No user value, uncomment the following line to provide one.
3993 # value_source default
3999 # Some packages require a startup routine to be called.
4000 # This can be carried out by application code, by supplying
4001 # a routine called cyg_package_start() which calls the
4002 # appropriate package startup routine(s).
4003 # Alternatively, this routine can be constructed automatically
4004 # and configured to call the startup routines of your choice.
4006 cdl_component CYGPKG_INFRA_STARTUP {
4007 # There is no associated value.
4011 # Start uITRON subsystem
4012 # Generate a call to initialize the
4013 # uITRON compatibility subsystem
4014 # within the system version of cyg_package_start().
4015 # This enables compatibility with uITRON.
4016 # You must configure uITRON with the correct tasks before
4017 # starting the uItron subsystem.
4018 # If this is disabled, and you want to use uITRON,
4019 # you must call cyg_uitron_start() from your own
4020 # cyg_package_start() or cyg_userstart().
4022 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4023 # This option is not active
4024 # ActiveIf constraint: CYGPKG_UITRON
4025 # CYGPKG_UITRON (unknown) == 0
4029 # No user value, uncomment the following line to provide one.
4031 # value_source default
4033 # Requires: CYGPKG_UITRON
4034 # CYGPKG_UITRON (unknown) == 0
4039 # Smaller slower memcpy()
4040 # Enabling this option causes the implementation of
4041 # the standard memcpy() routine to reduce code
4042 # size at the expense of execution speed. This
4043 # option is automatically enabled with the use of
4044 # the -Os option to the compiler. Also note that
4045 # the compiler will try to use its own builtin
4046 # version of memcpy() if possible, ignoring the
4047 # implementation in this package, unless given
4048 # the -fno-builtin compiler option.
4050 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4052 # No user value, uncomment the following line to provide one.
4054 # value_source default
4058 # Smaller slower memset()
4059 # Enabling this option causes the implementation of
4060 # the standard memset() routine to reduce code
4061 # size at the expense of execution speed. This
4062 # option is automatically enabled with the use of
4063 # the -Os option to the compiler. Also note that
4064 # the compiler will try to use its own builtin
4065 # version of memset() if possible, ignoring the
4066 # implementation in this package, unless given
4067 # the -fno-builtin compiler option.
4069 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4071 # No user value, uncomment the following line to provide one.
4073 # value_source default
4077 # Provide empty C++ delete functions
4078 # To deal with virtual destructors, where the correct delete()
4079 # function must be called for the derived class in question, the
4080 # underlying delete is called when needed, from destructors. This
4081 # is regardless of whether the destructor is called by delete itself.
4082 # So there is a reference to delete() from all destructors. The
4083 # default builtin delete() attempts to call free() if there is
4084 # one defined. So, if you have destructors, and you have free(),
4085 # as in malloc() and free(), any destructor counts as a reference
4086 # to free(). So the dynamic memory allocation code is linked
4087 # in regardless of whether it gets explicitly called. This
4088 # increases code and data size needlessly.
4089 # To defeat this undesirable behaviour, we define empty versions
4090 # of delete and delete. But doing this prevents proper use
4091 # of dynamic memory in C++ programs via C++'s new and delete
4093 # Therefore, this option is provided
4094 # for explicitly disabling the provision of these empty functions,
4095 # so that new and delete can be used, if that is what is required.
4097 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4099 # No user value, uncomment the following line to provide one.
4101 # value_source default
4105 # Threshold for valid number of delete calls
4106 # Some users don't know about the empty delete function and then
4107 # wonder why their C++ classes are leaking memory. If
4108 # INFRA_DEBUG is enabled we keep a counter for the number of
4109 # times delete is called. If it goes above this threshold we throw
4110 # an assertion failure. This should point heavy users of
4111 # delete in the right direction without upsetting those who want
4112 # an empty delete function.
4114 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4115 # This option is not active
4116 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4117 # CYGPKG_INFRA_DEBUG == 0
4121 # No user value, uncomment the following line to provide one.
4123 # value_source default
4124 # Default value: 100
4127 # Provide dummy abort() function
4128 # This option controls the inclusion of a dummy abort() function.
4129 # Parts of the C and C++ compiler runtime systems contain references
4130 # to abort(), particulary in the C++ exception handling code. It is
4131 # not possible to eliminate these references, so this dummy function
4132 # in included to satisfy them. It is not expected that this function
4133 # will ever be called, so its current behaviour is to simply loop.
4135 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4137 # No user value, uncomment the following line to provide one.
4139 # value_source default
4140 # Default value: CYGINT_ISO_EXIT == 0
4141 # CYGINT_ISO_EXIT == 0
4143 # Requires: !CYGINT_ISO_EXIT
4144 # CYGINT_ISO_EXIT == 0
4148 # Reset platform at end of test case execution
4149 # If this option is set then test case programs will reset the platform
4150 # when they terminate, as opposed to the default which is to just hang
4153 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4155 # No user value, uncomment the following line to provide one.
4157 # value_source default
4161 # Provide dummy strlen() function
4162 # This option controls the inclusion of a dummy strlen() function.
4163 # Parts of the C and C++ compiler runtime systems contain references
4164 # to strlen(), particulary in the C++ exception handling code. It is
4165 # not possible to eliminate these references, so this dummy function
4166 # in included to satisfy them. While it is not expected that this function
4167 # will ever be called, it is functional but uses the simplest, smallest
4168 # algorithm. There is a faster version of strlen() in the C library.
4170 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4172 # No user value, uncomment the following line to provide one.
4174 # value_source default
4175 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4176 # CYGINT_ISO_STRING_STRFUNCS == 1
4178 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4179 # CYGINT_ISO_STRING_STRFUNCS == 1
4183 # Make all compiler warnings show as errors
4184 # Enabling this option will cause all compiler warnings to show
4185 # as errors and bring the library build to a halt. This is used
4186 # to ensure that the code base is warning free, and thus ensure
4187 # that newly introduced warnings stand out and get fixed before
4188 # they show up as weird run-time behavior.
4190 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4195 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4196 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4199 # The following properties are affected by this value
4200 # option CYGBLD_GLOBAL_CFLAGS
4201 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4204 # Make compiler and assembler communicate by pipe
4205 # Enabling this option will cause the compiler to feed the
4206 # assembly output the the assembler via a pipe instead of
4207 # via a temporary file. This normally reduces the build
4210 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4215 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4216 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4220 # Infra build options
4221 # Package specific build options including control over
4222 # compiler flags used only in building this package.
4224 cdl_component CYGPKG_INFRA_OPTIONS {
4225 # There is no associated value.
4229 # Additional compiler flags
4230 # This option modifies the set of compiler flags for
4231 # building the eCos infra package. These flags are used
4232 # in addition to the set of global flags.
4234 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4236 # No user value, uncomment the following line to provide one.
4237 # user_value "-fno-rtti -Woverloaded-virtual"
4238 # value_source default
4239 # Default value: "-fno-rtti -Woverloaded-virtual"
4242 # Suppressed compiler flags
4243 # This option modifies the set of compiler flags for
4244 # building the eCos infra package. These flags are removed from
4245 # the set of global flags if present.
4247 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4249 # No user value, uncomment the following line to provide one.
4250 # user_value -Wno-pointer-sign
4251 # value_source default
4252 # Default value: -Wno-pointer-sign
4255 # Suppressed linker flags
4256 # This option modifies the set of linker flags for
4257 # building the eCos infra package tests. These flags are removed from
4258 # the set of global flags if present.
4260 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4262 # No user value, uncomment the following line to provide one.
4263 # user_value -Wl,--gc-sections
4264 # value_source default
4265 # Default value: -Wl,--gc-sections
4268 # Additional linker flags
4269 # This option modifies the set of linker flags for
4270 # building the eCos infra package tests. These flags are added to
4271 # the set of global flags if present.
4273 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4275 # No user value, uncomment the following line to provide one.
4276 # user_value -Wl,--fatal-warnings
4277 # value_source default
4278 # Default value: -Wl,--fatal-warnings
4281 # Infra package tests
4283 cdl_component CYGPKG_INFRA_TESTS {
4284 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4286 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4290 # Number of times a test runs
4291 # This option controls the number of times tests will execute their
4292 # basic function. Not all tests will honor this setting, but those
4293 # that do will execute the test N times before terminating. A value
4294 # less than 0 indicates to run forever.
4296 cdl_option CYGNUM_TESTS_RUN_COUNT {
4298 # No user value, uncomment the following line to provide one.
4300 # value_source default
4307 # Redboot ROM monitor
4308 # doc: ref/redboot.html
4309 # This package supports the Redboot [stand-alone debug monitor]
4310 # using eCos as the underlying board support mechanism.
4312 cdl_package CYGPKG_REDBOOT {
4313 # Packages cannot be added or removed, nor can their version be changed,
4314 # simply by editing their value. Instead the appropriate configuration
4315 # should be used to perform these actions.
4317 # This value cannot be modified here.
4319 # Current value: 1 current
4320 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4321 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4324 # The following properties are affected by this value
4325 # component CYGPKG_REDBOOT_ARM_OPTIONS
4326 # ActiveIf: CYGPKG_REDBOOT
4327 # component CYGPKG_REDBOOT_HAL_OPTIONS
4328 # ActiveIf: CYGPKG_REDBOOT
4329 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
4330 # ActiveIf: CYGPKG_REDBOOT
4331 # option CYGSEM_IO_ETH_DRIVERS_WARN
4332 # ActiveIf: CYGPKG_REDBOOT
4336 # Include support for ELF file format
4338 cdl_component CYGSEM_REDBOOT_ELF {
4340 # No user value, uncomment the following line to provide one.
4342 # value_source default
4347 # Use the virtual address in the ELF headers
4348 # The ELF headers contain both a virtual and a physical address
4349 # for where code/data should be loaded. By default the physical
4350 # address is used but sometimes it is necassary to use the
4351 # virtual address because of bugy toolchains
4353 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4355 # No user value, uncomment the following line to provide one.
4357 # value_source default
4362 # Methods of loading images using redboot
4364 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4365 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4366 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4367 # This value cannot be modified here.
4371 # The following properties are affected by this value
4372 # component CYGBLD_BUILD_REDBOOT
4373 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4376 # Build Redboot ROM ELF image
4377 # This option enables the building of the Redboot ELF image.
4378 # The image may require further relocation or symbol
4379 # stripping before being converted to a binary image.
4380 # This is handled by a rule in the target CDL.
4382 cdl_component CYGBLD_BUILD_REDBOOT {
4384 # No user value, uncomment the following line to provide one.
4386 # The inferred value should not be edited directly.
4388 # value_source inferred
4390 # Requires: CYGPKG_INFRA
4391 # CYGPKG_INFRA == current
4393 # Requires: CYGPKG_ISOINFRA
4394 # CYGPKG_ISOINFRA == current
4396 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4397 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4399 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4400 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4402 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4403 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4405 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4406 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4408 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4409 # CYGINT_ISO_STRING_MEMFUNCS == 1
4411 # Requires: CYGINT_ISO_STRING_STRFUNCS
4412 # CYGINT_ISO_STRING_STRFUNCS == 1
4414 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4415 # CYGINT_REDBOOT_LOAD_METHOD == 2
4418 # The following properties are affected by this value
4419 # package CYGPKG_HAL_ARM_TX27KARO
4420 # Requires: CYGBLD_BUILD_REDBOOT == 1
4421 # option CYGBLD_BUILD_REDBOOT_BIN
4422 # ActiveIf: CYGBLD_BUILD_REDBOOT
4426 # Include GDB support in RedBoot
4427 # RedBoot normally includes support for the GDB debugging
4428 # protocols. This option allows this to be disabled which
4429 # may yield a substantial savings in terms of code and memory
4432 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4433 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4434 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4441 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4442 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4444 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4445 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4449 # Threads debugging support
4450 # Enabling this option will include special code in the
4451 # GDB stubs to support debugging of threaded programs. In
4452 # the case of eCos programs, this support allows GDB to
4453 # have complete access to the eCos threads in the
4456 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4457 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4458 # CYG_HAL_STARTUP == ROMRAM
4462 # No user value, uncomment the following line to provide one.
4464 # value_source default
4466 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4467 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4471 # Customized version string
4472 # Use this option to define a customized version "string" for
4473 # RedBoot. Note: this value is only cosmetic, displayed by the
4474 # "version" command, but is useful for providing site specific
4475 # information about the RedBoot configuration.
4477 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4479 # No user value, uncomment the following line to provide one.
4481 # The inferred value should not be edited directly.
4482 inferred_value 1 "Ka-Ro 2009-06-10"
4483 # value_source inferred
4484 # Default value: 0 0
4487 # Enable command line editing
4488 # If this option is non-zero, RedBoot will remember the
4489 # last N command lines. These lines may be reused.
4490 # Enabling this history will also enable rudimentary
4491 # editting of the lines themselves.
4493 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4495 # No user value, uncomment the following line to provide one.
4497 # value_source default
4500 # The following properties are affected by this value
4501 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4502 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4503 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4504 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4507 # Enable command line editing using ANSI arrows, etc
4508 # If this option is enabled, RedBoot will accept standard ANSI key
4509 # sequences for cursor movement (along with the emacs style keys).
4511 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4512 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4513 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4517 # No user value, uncomment the following line to provide one.
4519 # value_source default
4523 # Enable history command and expansion
4524 # Enabling this option will allow RedBoot to provide a
4525 # history command to list previous commands. Also enables
4526 # history expansion via '!' character similar to bash
4529 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4531 # No user value, uncomment the following line to provide one.
4533 # value_source default
4535 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4536 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4540 # Number of unique RAM segments on platform
4541 # Change this option to be the number of memory segments which are
4542 # supported by the platform. If the value is greater than 1, then
4543 # a platform specific function must provide information about the
4544 # additional segments.
4546 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4548 # No user value, uncomment the following line to provide one.
4550 # value_source default
4554 # Include support gzip/zlib decompression
4556 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4557 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4558 # CYGPKG_COMPRESS_ZLIB == current
4562 # No user value, uncomment the following line to provide one.
4564 # value_source default
4567 # The following properties are affected by this value
4568 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4569 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4573 # Size of zlib decompression buffer
4574 # This is the size of the buffer filled with incoming data
4575 # during load before calls are made to the decompressor
4576 # function. For ethernet downloads this can be made bigger
4577 # (at the cost of memory), but for serial downloads on slow
4578 # processors it may be necessary to reduce the size to
4579 # avoid serial overruns. zlib appears to bail out if less
4580 # than five bytes are available initially so this is the
4583 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4585 # No user value, uncomment the following line to provide one.
4587 # value_source default
4589 # Legal values: 5 to 256
4592 # Support compression of Flash images
4593 # This CDL indicates whether flash images can
4594 # be decompressed from gzip/zlib format into RAM.
4596 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4597 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4598 # CYGPKG_REDBOOT_FLASH == 1
4600 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4601 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4602 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4605 # Calculated value: 1
4610 # Include GZIP uncompress command
4611 # Enable this option to include a 'gunzip' command
4612 # to uncompress GZIP compressed data.
4614 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4616 # No user value, uncomment the following line to provide one.
4618 # value_source default
4622 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4623 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4625 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4627 # No user value, uncomment the following line to provide one.
4629 # The inferred value should not be edited directly.
4631 # value_source inferred
4634 # The following properties are affected by this value
4635 # option CYGPRI_REDBOOT_ZLIB_FLASH
4636 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4640 # Include support for xyzModem downloads
4641 # doc: ref/download-command.html
4643 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4645 # No user value, uncomment the following line to provide one.
4647 # value_source default
4650 # The following properties are affected by this value
4651 # option CYGPKG_REDBOOT_CFLAGS_ADD
4652 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4655 # Additional compiler flags
4656 # This option modifies the set of compiler flags for
4657 # building the eCos infra package. These flags are used
4658 # in addition to the set of global flags.
4660 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4661 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4662 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4666 # No user value, uncomment the following line to provide one.
4667 # user_value -Wno-inline
4668 # value_source default
4669 # Default value: -Wno-inline
4672 # Allow the load-command write into Flash.
4673 # Write images direct to Flash via the load command.
4674 # We assume anything which is invalid RAM is flash, hence
4675 # the requires statement
4677 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4678 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4679 # CYGPKG_REDBOOT_FLASH == 1
4683 # No user value, uncomment the following line to provide one.
4685 # value_source default
4687 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4688 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4692 # Include MS Windows CE support
4693 # doc: ref/wince.html
4694 # This option enables MS Windows CE EShell support
4695 # and Windows CE .BIN images support
4697 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4704 # Include support for MXC USB downloads
4706 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4708 # No user value, uncomment the following line to provide one.
4710 # value_source default
4714 # Include support for i.MX USB OTG downloads
4716 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4718 # No user value, uncomment the following line to provide one.
4720 # value_source default
4724 # Include POSIX checksum command
4725 # doc: ref/cksum-command.html
4727 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4729 # No user value, uncomment the following line to provide one.
4731 # value_source default
4735 # Include memory fill command
4736 # doc: ref/mfill-command.html
4738 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4740 # No user value, uncomment the following line to provide one.
4742 # value_source default
4746 # Include memory compare command
4747 # doc: ref/mcmp-command.html
4749 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4751 # No user value, uncomment the following line to provide one.
4753 # value_source default
4757 # Include memory copy command
4758 # doc: ref/mcopy-command.html
4760 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4762 # No user value, uncomment the following line to provide one.
4764 # value_source default
4768 # Include memory dump command
4769 # doc: ref/dump-command.html
4771 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4773 # No user value, uncomment the following line to provide one.
4775 # value_source default
4779 # Include cache command
4780 # doc: ref/cache-command.html
4782 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4784 # No user value, uncomment the following line to provide one.
4786 # value_source default
4790 # Include exec command
4791 # doc: ref/exec-command.html
4793 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4795 # No user value, uncomment the following line to provide one.
4797 # value_source default
4800 # The following properties are affected by this value
4801 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4802 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4805 # Include I/O Memory commands 'iopeek' and 'iopoke'
4807 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4809 # No user value, uncomment the following line to provide one.
4811 # value_source default
4815 # Granularity of timer/ticks
4816 # This option controls the granularity of the timers.
4817 # Faster CPUs can afford higher granularity (lower values)
4818 # which should give higher network performance since the stack
4821 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4823 # No user value, uncomment the following line to provide one.
4825 # value_source default
4826 # Default value: 250
4827 # Legal values: 10 25 50 100 250 500 1000
4830 # Redboot Networking
4831 # This option includes networking support in RedBoot.
4833 cdl_component CYGPKG_REDBOOT_NETWORKING {
4834 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4835 # CYGPKG_IO_ETH_DRIVERS == current
4839 # No user value, uncomment the following line to provide one.
4841 # value_source default
4844 # The following properties are affected by this value
4845 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4846 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4850 # Print net debug information
4851 # This option is overriden by the configuration stored
4854 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4856 # No user value, uncomment the following line to provide one.
4858 # value_source default
4862 # Support TFTP for download
4863 # This option enables the use of the TFTP protocol for
4866 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4868 # No user value, uncomment the following line to provide one.
4870 # value_source default
4874 # Support HTTP for download
4875 # This option enables the use of the HTTP protocol for
4878 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4885 # Default IP address
4886 # This IP address is the default used by RedBoot if
4887 # a BOOTP/DHCP server does not respond. The numbers
4888 # should be separated by *commas*, and not dots. If
4889 # an IP address is configured into the Flash
4890 # configuration, that will be used in preference.
4892 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4894 # No user value, uncomment the following line to provide one.
4896 # value_source default
4897 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4898 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4903 # Do not try to use BOOTP
4904 # By default Redboot tries to use BOOTP to get an IP
4905 # address. If there's no BOOTP server on your network
4906 # use this option to avoid to wait until the
4907 # timeout. This option is overriden by the
4908 # configuration stored in flash.
4910 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4911 # This option is not active
4912 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4915 # No user value, uncomment the following line to provide one.
4917 # value_source default
4921 # Default bootp server
4922 # This IP address is the default server
4923 # address used by RedBoot if a BOOTP/DHCP
4924 # server does not respond. The numbers should
4925 # be separated by *commas*, and not dots. If
4926 # an IP address is configured into the Flash
4927 # configuration, that will be used in
4930 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4931 # This option is not active
4932 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4935 # No user value, uncomment the following line to provide one.
4937 # value_source default
4938 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4939 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4944 # Use DHCP to get IP information
4945 # Use DHCP protocol to obtain pertinent IP addresses, such
4946 # as the client, server, gateway, etc.
4948 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4950 # No user value, uncomment the following line to provide one.
4952 # value_source default
4955 # The following properties are affected by this value
4956 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4957 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4960 # Use a gateway for non-local IP traffic
4961 # Enabling this option will allow the RedBoot networking
4962 # stack to use a [single] gateway to reach a non-local
4963 # IP address. If disabled, RedBoot will only be able to
4964 # reach nodes on the same subnet.
4966 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4968 # No user value, uncomment the following line to provide one.
4970 # value_source default
4972 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4973 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4978 # Default gateway IP address
4979 # This IP address is the default used by RedBoot
4980 # if a BOOTP/DHCP server does not respond. The
4981 # numbers should be separated by *commas*, and
4982 # not dots. If an IP address is configured into
4983 # the Flash configuration, that will be used in
4986 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4988 # No user value, uncomment the following line to provide one.
4990 # value_source default
4991 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4992 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4996 # Default IP address mask
4997 # This IP address mask is the default used by
4998 # RedBoot if a BOOTP/DHCP server does not
4999 # respond. The numbers should be separated by
5000 # *commas*, and not dots. If an IP address is
5001 # configured into the Flash configuration, that
5002 # will be used in preference.
5004 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5006 # No user value, uncomment the following line to provide one.
5008 # value_source default
5009 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5010 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5015 # TCP port to listen for incoming connections
5016 # RedBoot will 'listen' on this port for incoming TCP
5017 # connections. This allows outside connections to be made
5018 # to the platform, either for GDB or RedBoot commands.
5020 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5022 # No user value, uncomment the following line to provide one.
5024 # value_source default
5025 # Default value: 9000
5028 # Number of [network] packet buffers
5029 # RedBoot may need to buffer network data to support
5030 # various connections. This option allows control
5031 # over the number of such buffered packets, and in
5032 # turn, controls the amount of memory used by RedBoot
5033 # (which is not available to user applications).
5034 # Each packet buffer takes up about 1514 bytes.
5035 # Note: there is little need to make this larger than
5038 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5040 # No user value, uncomment the following line to provide one.
5042 # value_source default
5044 # Legal values: 3 to 8
5048 # When this option is enabled, RedBoot will be built with
5049 # support for DNS, allowing use of hostnames on the command
5052 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5053 # This option is not active
5054 # ActiveIf constraint: CYGPKG_NS_DNS
5055 # CYGPKG_NS_DNS (unknown) == 0
5059 # No user value, uncomment the following line to provide one.
5061 # value_source default
5063 # Requires: !CYGPKG_NS_DNS_BUILD
5064 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5070 # This option sets the IP of the default DNS. The IP can be
5071 # changed at runtime as well.
5073 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5074 # This option is not active
5075 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5076 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5077 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5081 # No user value, uncomment the following line to provide one.
5082 # user_value 0.0.0.0
5083 # value_source default
5084 # Default value: 0.0.0.0
5087 # Timeout in DNS lookup
5088 # This option sets the timeout used when looking up an
5089 # address via the DNS. Default is 10 seconds.
5091 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5092 # This option is not active
5093 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5096 # No user value, uncomment the following line to provide one.
5098 # value_source default
5102 # Support the use of a domain name
5103 # This option controls if Redboot supports domain
5104 # names when performing DNS lookups
5106 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5107 # This option is not active
5108 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5111 # No user value, uncomment the following line to provide one.
5113 # value_source default
5118 # Default DNS domain
5119 # This option sets the default DNS domain name.
5120 # This value will be overwritten by the value in
5121 # flash or a domain returned by DHCP
5123 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5124 # This option is not active
5125 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5126 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5129 # No user value, uncomment the following line to provide one.
5131 # value_source default
5132 # Default value: 0 0
5135 # Get DNS domain from Flash
5136 # This option enables getting the domain name
5137 # from the flash configuration. This can later be
5138 # overwritten by a value learnt from DHCP
5140 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5141 # This option is not active
5142 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5143 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5144 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5145 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5149 # No user value, uncomment the following line to provide one.
5151 # value_source default
5155 # Use DNS domain from DHCP
5156 # This option enables the use of the domain name
5159 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5160 # This option is not active
5161 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5162 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5165 # No user value, uncomment the following line to provide one.
5167 # value_source default
5171 # BOOTP/DHCP DNS domain buffer size
5172 # This options sets the size of the static
5173 # buffer used by BOOTP/DHCP to store the DNS
5174 # domain name. The domain name will not be
5175 # set if the buffer is too small to hold it.
5177 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5178 # This option is not active
5179 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5180 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5183 # No user value, uncomment the following line to provide one.
5185 # value_source default
5191 # Default network device driver
5192 # This is the name of the default network device to use.
5194 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5195 # This option is not active
5196 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5197 # CYGHWR_NET_DRIVERS == 1
5201 # No user value, uncomment the following line to provide one.
5203 # value_source default
5204 # Default value: "\"\""
5207 # Initialize only one net device
5208 # This option tells RedBoot to stop initializing network
5209 # devices when it finds the first device which is
5210 # successfully initialized. The default behavior causes
5211 # all network devices to be initialized.
5213 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5214 # This option is not active
5215 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5216 # CYGHWR_NET_DRIVERS == 1
5220 # No user value, uncomment the following line to provide one.
5222 # value_source default
5227 # Let RedBoot use any I/O channel for its console.
5228 # If this option is enabled then RedBoot will attempt to use all
5229 # defined serial I/O channels for its console device. Once input
5230 # arrives at one of these channels then the console will use only
5233 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5235 # No user value, uncomment the following line to provide one.
5237 # The inferred value should not be edited directly.
5239 # value_source inferred
5243 # Let RedBoot adjust the baud rate of the serial console.
5244 # If this option is enabled then RedBoot will support commands
5245 # to set and query the baud rate on the selected console.
5247 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5248 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5249 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5253 # No user value, uncomment the following line to provide one.
5255 # value_source default
5259 # Run a platform specific startup function.
5260 # If this option is enabled then RedBoot will execute a platform
5261 # specific startup function before entering into its command line
5262 # processing. This allows the platform to perform any special
5263 # setups before RedBoot actually starts running. Note: the entire
5264 # RedBoot environment will already be initialized at this point.
5266 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5268 # No user value, uncomment the following line to provide one.
5270 # value_source default
5274 # Run a platform specific ESA validation function.
5275 # If this option is enabled then RedBoot will execute a platform
5276 # specific function to validate an ethernet ESA. This would be
5277 # useful if the address must conform to standards set by the
5278 # hardware manufacturer, etc.
5280 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5282 # No user value, uncomment the following line to provide one.
5284 # The inferred value should not be edited directly.
5286 # value_source inferred
5289 # The following properties are affected by this value
5290 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5291 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5292 # option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI
5293 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5296 # Maximum command line length
5297 # This option allows control over how long the CLI command line
5298 # should be. This space will be allocated statically
5299 # rather than from RedBoot's stack.
5301 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5303 # No user value, uncomment the following line to provide one.
5305 # The inferred value should not be edited directly.
5307 # value_source inferred
5308 # Default value: 256
5311 # Command processing idle timeout (ms)
5312 # This option controls the timeout period before the
5313 # command processing is considered 'idle'. Making this
5314 # number smaller will cause idle processing to take place
5315 # more often, etc. The default value of 10ms is a reasonable
5316 # tradeoff between responsiveness and overhead.
5318 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5320 # No user value, uncomment the following line to provide one.
5322 # value_source default
5326 # Validate RAM addresses during load
5327 # This option controls whether or not RedBoot will make
5328 # sure that memory being used by the "load" command is
5329 # in fact in user RAM. Leaving the option enabled makes
5330 # for a safer environment, but this check may not be valid
5331 # on all platforms, thus the ability to disable it.
5332 # ** Disable this only with great care **
5334 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5336 # No user value, uncomment the following line to provide one.
5338 # value_source default
5341 # The following properties are affected by this value
5342 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5343 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5346 # Allow RedBoot to support FLASH programming
5347 # If this option is enabled then RedBoot will provide commands
5348 # to manage images in FLASH memory. These images can be loaded
5349 # into memory for execution or executed in place.
5351 cdl_component CYGPKG_REDBOOT_FLASH {
5352 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5353 # CYGHWR_IO_FLASH_DEVICE == 1
5357 # No user value, uncomment the following line to provide one.
5359 # value_source default
5362 # The following properties are affected by this value
5363 # option CYGPRI_REDBOOT_ZLIB_FLASH
5364 # ActiveIf: CYGPKG_REDBOOT_FLASH
5365 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5366 # ActiveIf: CYGPKG_REDBOOT_FLASH
5370 # Byte order used to store info in flash.
5371 # This option controls the byte ordering used to store
5372 # the FIS directory info and flash config info.
5374 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5376 # No user value, uncomment the following line to provide one.
5377 # user_value NATURAL
5378 # value_source default
5379 # Default value: NATURAL
5380 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5383 # RedBoot Flash Image System support
5384 # doc: ref/flash-image-system.html
5385 # This option enables the Flash Image System commands
5386 # and support within RedBoot. If disabled, simple Flash
5387 # access commands such as "fis write" will still exist.
5388 # This option would be disabled for targets that need simple
5389 # FLASH manipulation, but do not have the need or space for
5390 # complete image management.
5392 cdl_option CYGOPT_REDBOOT_FIS {
5394 # No user value, uncomment the following line to provide one.
5396 # value_source default
5399 # The following properties are affected by this value
5400 # component CYGPKG_REDBOOT_FIS_CONTENTS
5401 # ActiveIf: CYGOPT_REDBOOT_FIS
5402 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5403 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5404 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5405 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5408 # Max number of chunks of free space to manage
5409 # If this option is defined then "fis free" will
5410 # rely on the FIS directory to determine what space is
5411 # free within the FLASH. This option controls the
5412 # maximum number of free segment which can be handled
5413 # (typically this number is small). If this option is
5414 # not enabled, the the archaic behaviour of actually
5415 # scanning the FLASH for erased sectors (unreliable)
5416 # will be used to determine what's free and what's
5419 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5421 # No user value, uncomment the following line to provide one.
5423 # value_source default
5424 # Default value: 1 32
5427 # Flash Image System default directory contents
5429 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5430 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5431 # CYGOPT_REDBOOT_FIS == 1
5434 # Calculated value: 1
5440 # Flash block containing the Directory
5441 # Which block of flash should hold the directory
5442 # information. Positive numbers are absolute block
5443 # numbers. Negative block numbers count backwards
5444 # from the last block. eg 2 means block 2, -2
5445 # means the last but one block.
5447 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5449 # No user value, uncomment the following line to provide one.
5451 # value_source default
5454 # The following properties are affected by this value
5455 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5456 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5457 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5460 # Redundant Flash Image System Directory Support
5461 # This option enables the use of a redundant FIS
5462 # directory within RedBoot. If enabled a flash block
5463 # will be reserved for a second copy of the fis
5464 # directory. Doing this allow for power failure safe
5465 # updates of the directory by the application.
5467 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5469 # No user value, uncomment the following line to provide one.
5471 # value_source default
5473 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5474 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5479 # Flash block containing the backup Directory
5480 # Which block of flash should hold the redundant
5481 # directory information. Positive numbers are
5482 # absolute block numbers. Negative block numbers
5483 # count backwards from the last block. eg 2 means
5484 # block 2, -2 means the last but one block.
5486 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5487 # This option is not active
5488 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5491 # No user value, uncomment the following line to provide one.
5493 # value_source default
5495 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5496 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5497 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5498 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5501 # The following properties are affected by this value
5502 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5503 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5504 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5508 # Pseudo-file to describe reserved area
5509 # If an area of FLASH is reserved, it is informative to
5510 # have a fis entry describing it. This option controls
5511 # creation of such an entry by default in the fis init
5514 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5515 # This option is not active
5516 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5517 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5521 # No user value, uncomment the following line to provide one.
5523 # value_source default
5527 # File to describe RedBoot boot image
5528 # Normally a ROM-startup RedBoot image is first in the
5529 # FLASH, and the system boots using that image. This
5530 # option controls creation of an entry describing it in
5531 # the fis init command. It might be disabled if a
5532 # platform has an immutable boot image of its own, where
5533 # we use a POST-startup RedBoot instead, which performs
5534 # less board initialization.
5536 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5538 # No user value, uncomment the following line to provide one.
5540 # value_source default
5543 # The following properties are affected by this value
5544 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5545 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5546 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5547 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5550 # File to describe RedBoot POST-compatible image
5551 # This option controls creation of an entry describing a
5552 # POST-startup RedBoot image in the fis init command.
5553 # Not all platforms support POST-startup. A platform
5554 # might have both for testing purposes, where the
5555 # eventual user would substitute their own POST code for
5556 # the initial ROM-startup RedBoot, and then jump to the
5557 # POST-compatible RedBoot immediately following.
5559 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5561 # No user value, uncomment the following line to provide one.
5563 # value_source default
5564 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5565 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5570 # Offset of POST image from FLASH start
5571 # This option specifies the offset for a POST image from
5572 # the start of FLASH. If unset, then the fis entry
5573 # describing the POST image will be placed where
5576 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5577 # This option is not active
5578 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5581 # No user value, uncomment the following line to provide one.
5583 # value_source default
5584 # Default value: 0 0
5585 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5586 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5587 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5590 # The following properties are affected by this value
5591 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5592 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5596 # File to describe RedBoot backup image
5597 # This option controls creation of an entry describing a
5598 # backup RedBoot image in the fis init command.
5599 # Conventionally a RAM-startup RedBoot image is kept
5600 # under this name for use in updating the ROM-based
5601 # RedBoot that boots the board.
5603 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5605 # No user value, uncomment the following line to provide one.
5607 # value_source default
5611 # Include ARM SIB ID in FIS
5612 # If set, this option will cause the last 5 words of
5613 # the FIS to include the special ID needed for the
5614 # flash to be recognized as a reserved area for RedBoot
5615 # by an ARM BootRom monitor.
5617 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5619 # No user value, uncomment the following line to provide one.
5621 # value_source default
5625 # Size of FIS directory entry
5626 # The FIS directory is limited to one single flash
5627 # sector. If your flash has tiny sectors, you may wish
5628 # to reduce this value in order to get more slots in
5629 # the FIS directory.
5631 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5633 # No user value, uncomment the following line to provide one.
5635 # value_source default
5636 # Default value: 256
5639 # Number of FIS directory entries
5640 # The FIS directory normally occupies a single flash
5641 # sector. Adjusting this value can allow for more than
5642 # one flash sector to be used, which is useful if your
5643 # sectors are very small.
5645 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5647 # No user value, uncomment the following line to provide one.
5649 # value_source default
5653 # Maximum RedBoot image size
5654 # This option controls the maximum length reserved
5655 # for the RedBoot boot image in the FIS table.
5656 # This should be a multiple of the flash's erase
5659 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5661 # No user value, uncomment the following line to provide one.
5662 # user_value 0x00020000
5663 # The inferred value should not be edited directly.
5664 inferred_value 0x00040000
5665 # value_source inferred
5666 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5667 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5671 # Offset from start of FLASH to RedBoot boot image
5672 # This option controls where the RedBoot boot image is
5673 # located relative to the start of FLASH.
5675 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5677 # No user value, uncomment the following line to provide one.
5679 # value_source default
5680 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5681 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5683 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5684 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5685 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5688 # The following properties are affected by this value
5689 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5690 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5691 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5692 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5693 # component CYGPKG_HAL_ARM_TX27_OPTIONS
5694 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5697 # Size of reserved area at start of FLASH
5698 # This option reserves an area at the start of
5699 # FLASH where RedBoot will never interfere; it is
5700 # expected that this area contains
5701 # (non-RedBoot-based) POST code or some other boot
5702 # monitor that executes before RedBoot.
5704 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5706 # No user value, uncomment the following line to provide one.
5708 # value_source default
5711 # The following properties are affected by this value
5712 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5713 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5714 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5715 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5716 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5717 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5721 # Keep all RedBoot FLASH data blocks locked.
5722 # When this option is enabled, RedBoot will keep configuration
5723 # data and the FIS directory blocks implicitly locked. While
5724 # this is somewhat safer, it does add overhead during updates.
5726 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5727 # This option is not active
5728 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5729 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5733 # No user value, uncomment the following line to provide one.
5735 # value_source default
5739 # Use CRC checksums on FIS images.
5740 # When this option is enabled, RedBoot will use CRC checksums
5741 # when reading and writing flash images.
5743 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5745 # No user value, uncomment the following line to provide one.
5747 # value_source default
5751 # ARM FLASH drivers support SIB flash block structure
5752 # This interface is implemented by a flash driver
5753 # to indicate that it supports the ARM SIB flash
5756 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5757 # No options implement this inferface
5758 # ActiveIf constraint: CYGPKG_HAL_ARM
5759 # CYGPKG_HAL_ARM == current
5762 # This value cannot be modified here.
5766 # The following properties are affected by this value
5767 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5768 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5771 # Use ARM SIB flash block structure
5772 # This option is used to interpret ARM Flash System
5773 # information blocks.
5775 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5776 # This option is not active
5777 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5778 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5782 # No user value, uncomment the following line to provide one.
5784 # value_source default
5789 # Keep RedBoot configuration data in FLASH
5790 # When this option is enabled, RedBoot will keep configuration
5791 # data in a separate block of FLASH memory. This data will
5792 # include such items as the node IP address or startup scripts.
5794 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5796 # No user value, uncomment the following line to provide one.
5798 # value_source default
5799 # Default value: CYGPKG_IO_FLASH != 0
5800 # CYGPKG_IO_FLASH == current
5803 # The following properties are affected by this value
5804 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5805 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5806 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5807 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5808 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5809 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5810 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5811 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5812 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5813 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5814 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5815 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5816 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5817 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5821 # Length of configuration data in FLASH
5822 # This option is used to control the amount of memory and FLASH
5823 # to be used for configuration options (persistent storage).
5825 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5827 # No user value, uncomment the following line to provide one.
5829 # value_source default
5830 # Default value: 4096
5833 # Style of media used for persistent data storage
5834 # Persistent data storage can either be held in 'norma' FLASH
5835 # or some other device (represented by the 'EEPROM' choice).
5836 # The different styles utilize different access methods.
5838 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5840 # No user value, uncomment the following line to provide one.
5842 # value_source default
5843 # Default value: FLASH
5844 # Legal values: "FLASH" "EEPROM"
5846 # The following properties are affected by this value
5847 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5848 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5849 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5850 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5853 # Merged config data and FIS directory
5854 # If this option is set, then the FIS directory and FLASH
5855 # configuration database will be stored in the same physical
5858 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5859 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5860 # CYGOPT_REDBOOT_FIS == 1
5861 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5865 # No user value, uncomment the following line to provide one.
5867 # value_source default
5870 # The following properties are affected by this value
5871 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5872 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5875 # Which block of flash to use
5876 # Which block of flash should hold the configuration
5877 # information. Positive numbers are absolute block numbers.
5878 # Negative block numbers count backwards from the last block.
5879 # eg 2 means block 2, -2 means the last but one block.
5881 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5883 # No user value, uncomment the following line to provide one.
5885 # value_source default
5889 # Support simple macros/aliases in FLASH
5890 # This option is used to allow support for simple text-based
5891 # macros (aliases). These aliases are kept in the FLASH
5892 # configuration data (persistent storage).
5894 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5896 # No user value, uncomment the following line to provide one.
5898 # value_source default
5902 # Length of strings in FLASH configuration data
5903 # This option is used to control the amount of memory
5904 # and FLASH to be used for string configuration
5905 # options (persistent storage).
5907 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5909 # No user value, uncomment the following line to provide one.
5911 # value_source default
5912 # Default value: 128
5915 # Length of configuration script(s) in FLASH
5916 # This option is used to control the amount of memory and
5917 # FLASH to be used for configuration options (persistent
5920 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5922 # No user value, uncomment the following line to provide one.
5924 # The inferred value should not be edited directly.
5926 # value_source inferred
5927 # Default value: 512
5930 # Fallback to read-only FLASH configuration
5931 # This option will cause the configuration information to
5932 # revert to the readonly information stored in the FLASH.
5933 # The option only takes effect after
5934 # 1) the config_ok flag has been set to be true,
5935 # indicating that at one time the copy in RAM was valid;
5937 # 2) the information in RAM has been verified to be invalid
5939 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5941 # No user value, uncomment the following line to provide one.
5943 # value_source default
5944 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5945 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5950 # Allow RedBoot to support fileio
5951 # If this option is enabled then RedBoot will provide commands
5952 # to load files from fileio file systems such as JFFS2.
5954 cdl_component CYGPKG_REDBOOT_FILEIO {
5955 # This option is not active
5956 # ActiveIf constraint: CYGPKG_IO_FILEIO
5957 # CYGPKG_IO_FILEIO (unknown) == 0
5961 # No user value, uncomment the following line to provide one.
5963 # value_source default
5966 # The following properties are affected by this value
5967 # option CYGNUM_REDBOOT_GETC_BUFFER
5968 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5972 # Include an ls command
5973 # If this option is enabled a simple ls command will be
5974 # included in redboot so the contents of a directory
5977 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5978 # This option is not active
5979 # The parent CYGPKG_REDBOOT_FILEIO is not active
5982 # No user value, uncomment the following line to provide one.
5984 # value_source default
5989 # Allow RedBoot to support disks
5990 # If this option is enabled then RedBoot will provide commands
5991 # to load disk files.
5993 cdl_component CYGPKG_REDBOOT_DISK {
6001 # Include Redboot commands for disk access
6003 cdl_option CYGSEM_REDBOOT_DISK {
6004 # This option is not active
6005 # The parent CYGPKG_REDBOOT_DISK is disabled
6008 # No user value, uncomment the following line to provide one.
6010 # value_source default
6011 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6012 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6016 # Hardware drivers for disk-type devices
6018 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6019 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6020 # This option is not active
6021 # The parent CYGPKG_REDBOOT_DISK is disabled
6023 # This value cannot be modified here.
6027 # The following properties are affected by this value
6028 # option CYGSEM_REDBOOT_DISK
6029 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6032 # Maximum number of supported disks
6033 # This option controls the number of disks supported by
6036 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6037 # This option is not active
6038 # The parent CYGPKG_REDBOOT_DISK is disabled
6041 # No user value, uncomment the following line to provide one.
6043 # value_source default
6047 # Maximum number of partitions per disk
6048 # This option controls the maximum number of supported
6049 # partitions per disk.
6051 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6052 # This option is not active
6053 # The parent CYGPKG_REDBOOT_DISK is disabled
6056 # No user value, uncomment the following line to provide one.
6058 # value_source default
6062 # Support IDE disks.
6063 # When this option is enabled, RedBoot will support IDE disks.
6065 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6066 # This option is not active
6067 # The parent CYGPKG_REDBOOT_DISK is disabled
6068 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6069 # CYGINT_HAL_PLF_IF_IDE == 0
6073 # No user value, uncomment the following line to provide one.
6075 # value_source default
6080 # Work with VMware virtual disks
6081 # This option controls the disk driver behavior at
6084 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6085 # This option is not active
6086 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6089 # No user value, uncomment the following line to provide one.
6091 # value_source default
6096 # Support Linux second extended filesystems.
6097 # When this option is enabled, RedBoot will support EXT2
6100 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6101 # This option is not active
6102 # The parent CYGPKG_REDBOOT_DISK is disabled
6105 # No user value, uncomment the following line to provide one.
6107 # value_source default
6111 # Support ISO9660 filesystems.
6112 # When this option is enabled, RedBoot will support ISO9660
6115 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6116 # This option is not active
6117 # The parent CYGPKG_REDBOOT_DISK is disabled
6119 # Calculated value: 0
6126 # doc: ref/persistent-state-flash.html
6127 # This contains options related to RedBoot's boot script
6130 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6131 # There is no associated value.
6135 # Boot scripting enabled
6136 # This option controls whether RedBoot boot script
6137 # functionality is enabled.
6139 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6140 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6141 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6142 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6145 # Calculated value: 1
6150 # Use default RedBoot boot script
6151 # If enabled, this option will tell RedBoot to use the
6152 # value of this option as a default boot script.
6154 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6156 # No user value, uncomment the following line to provide one.
6158 # The inferred value should not be edited directly.
6160 # value_source inferred
6161 # Default value: 0 0
6163 # The following properties are affected by this value
6164 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6165 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6168 # Resolution (in ms) for script timeout value.
6169 # This option controls the resolution of the script
6170 # timeout. The value is specified in milliseconds
6171 # (ms), thus to have the script timeout be defined in
6172 # terms of tenths of seconds, use 100.
6174 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6176 # No user value, uncomment the following line to provide one.
6178 # The inferred value should not be edited directly.
6180 # value_source inferred
6181 # Default value: 1000
6184 # Script default timeout value
6185 # This option is used to set the default timeout for startup
6186 # scripts, when they are enabled.
6188 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6190 # No user value, uncomment the following line to provide one.
6192 # The inferred value should not be edited directly.
6194 # value_source inferred
6199 # Support RTC for time & date functions
6200 # When this option is enabled, RedBoot will support commands to
6201 # query and set the real time clock (time and date)
6203 cdl_option CYGSEM_REDBOOT_RTC {
6204 # This option is not active
6205 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6206 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6210 # No user value, uncomment the following line to provide one.
6212 # value_source default
6216 # Behave like a ROM monitor
6217 # Enabling this option will allow RedBoot to provide ROM
6218 # monitor-style services to programs which it executes.
6220 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6221 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6222 # CYG_HAL_STARTUP == ROMRAM
6223 # CYG_HAL_STARTUP == ROMRAM
6226 # Calculated value: 1
6229 # Requires: CYGSEM_HAL_ROM_MONITOR
6230 # CYGSEM_HAL_ROM_MONITOR == 1
6234 # Allow RedBoot to handle GNUPro application 'syscalls'.
6235 # If this option is enabled then RedBoot will install a
6236 # syscall handler to support debugging of applications
6237 # based on GNUPro newlib/bsp.
6239 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6241 # No user value, uncomment the following line to provide one.
6243 # value_source default
6246 # The following properties are affected by this value
6247 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6248 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6249 # option CYGPKG_HAL_GDB_FILEIO
6250 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6254 # Support additional syscalls for 'gprof' profiling
6255 # Support additional syscalls to support a periodic callback
6256 # function for histogram-style profiling, and an enquire/set
6258 # The application must use the GNUPro newlib facilities
6261 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6262 # This option is not active
6263 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6264 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6265 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6269 # No user value, uncomment the following line to provide one.
6271 # value_source default
6275 # Does the HAL support 'gprof' profiling?
6277 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6278 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6279 # This option is not active
6280 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6282 # This value cannot be modified here.
6286 # The following properties are affected by this value
6287 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6288 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6291 # Do not raise SIGTRAP when program exits
6292 # For some (single shot) newlib based programs,
6293 # exiting and returning a termination status may be
6294 # the normal expected behavior.
6296 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6297 # This option is not active
6298 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6301 # No user value, uncomment the following line to provide one.
6303 # value_source default
6308 # Use a common buffer for Zlib and FIS
6309 # Use a common memory buffer for both the zlib workspace
6310 # and FIS directory operations. This can save a substantial
6311 # amount of RAM, especially when flash sectors are large.
6313 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6314 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6315 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6316 # CYGOPT_REDBOOT_FIS == 1
6320 # No user value, uncomment the following line to provide one.
6322 # value_source default
6327 # Size of Zlib/FIS common buffer
6328 # Size of common buffer to allocate. Must be at least the
6329 # size of one flash sector.
6331 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6332 # This option is not active
6333 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6336 # No user value, uncomment the following line to provide one.
6337 # user_value 0x0000C000
6338 # value_source default
6339 # Default value: 0x0000C000
6340 # Legal values: 0x4000 to 0x80000000
6344 # Buffer size in getc when loading images
6345 # When loading images a buffer is used between redboot and the
6346 # underlying storage medium, eg a filesystem, or a socket etc.
6347 # The size of this buffer can have a big impart on load speed.
6349 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6351 # No user value, uncomment the following line to provide one.
6353 # value_source default
6354 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6355 # CYGPKG_REDBOOT_FILEIO == 0
6360 # Redboot for ARM options
6361 # This option lists the target's requirements for a valid Redboot
6364 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6365 # ActiveIf constraint: CYGPKG_REDBOOT
6366 # CYGPKG_REDBOOT == current
6369 # There is no associated value.
6371 # The following properties are affected by this value
6375 # Provide the exec command in RedBoot
6376 # This option contains requirements for booting linux
6377 # from RedBoot. The component is enabled/disabled from
6380 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6381 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6382 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6385 # There is no associated value.
6389 # Enable -x switch for exec command.
6390 # This option allows bi-endian platforms to launch kernels
6391 # built for an endianess different than the RedBoot endianess
6393 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6395 # No user value, uncomment the following line to provide one.
6397 # value_source default
6401 # Physical base address of linux kernel
6402 # This is the physical address of the base of the
6403 # Linux kernel image.
6405 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6407 # No user value, uncomment the following line to provide one.
6408 # user_value 0xA0108000
6409 # value_source default
6410 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6411 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6415 # Default physical base address of linux kernel
6416 # This is the physical address of the base of the
6417 # Linux kernel image. This option gets set by the
6420 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6422 # No user value, uncomment the following line to provide one.
6423 # user_value 0x00008000
6424 # The inferred value should not be edited directly.
6425 inferred_value 0xA0108000
6426 # value_source inferred
6427 # Default value: 0x00008000
6429 # The following properties are affected by this value
6430 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6431 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6432 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
6433 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6436 # Base address of linux kernel parameter tags
6437 # This is the base address of the area of memory used to
6438 # pass parameters to the Linux kernel. This should be chosen
6439 # to avoid overlap with the kernel and any ramdisk image.
6441 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6443 # No user value, uncomment the following line to provide one.
6444 # user_value 0x00000100
6445 # value_source default
6446 # Default value: 0x00000100
6451 # Redboot HAL options
6452 # This option lists the target's requirements for a valid Redboot
6455 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6456 # ActiveIf constraint: CYGPKG_REDBOOT
6457 # CYGPKG_REDBOOT == current
6460 # There is no associated value.
6464 # Build Redboot ROM binary image
6465 # This option enables the conversion of the Redboot ELF
6466 # image to a binary image suitable for ROM programming.
6468 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6469 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6470 # CYGBLD_BUILD_REDBOOT == 1
6474 # No user value, uncomment the following line to provide one.
6476 # value_source default
6481 # Redboot HAL variant options
6483 cdl_component CYGPKG_REDBOOT_HAL_TX27_OPTIONS {
6484 # ActiveIf constraint: CYGPKG_REDBOOT
6485 # CYGPKG_REDBOOT == current
6488 # There is no associated value.
6489 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6490 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6495 # ISO C and POSIX infrastructure
6496 # eCos supports implementations of ISO C libraries and POSIX
6497 # implementations. This package provides infrastructure used by
6498 # all such implementations.
6500 cdl_package CYGPKG_ISOINFRA {
6501 # Packages cannot be added or removed, nor can their version be changed,
6502 # simply by editing their value. Instead the appropriate configuration
6503 # should be used to perform these actions.
6505 # This value cannot be modified here.
6507 # Current value: 1 current
6509 # The following properties are affected by this value
6510 # component CYGBLD_BUILD_REDBOOT
6511 # Requires: CYGPKG_ISOINFRA
6512 # package CYGPKG_LIBC_STRING
6513 # Requires: CYGPKG_ISOINFRA
6514 # package CYGPKG_COMPRESS_ZLIB
6515 # Requires: CYGPKG_ISOINFRA
6516 # package CYGPKG_IO_FLASH
6517 # Requires: CYGPKG_ISOINFRA
6518 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6519 # Requires: CYGPKG_ISOINFRA
6520 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6521 # DefaultValue: 0 != CYGPKG_ISOINFRA
6522 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6523 # ActiveIf: CYGPKG_ISOINFRA
6524 # package CYGPKG_LIBC_I18N
6525 # Requires: CYGPKG_ISOINFRA
6526 # package CYGPKG_LIBC_STDLIB
6527 # Requires: CYGPKG_ISOINFRA
6531 # Startup and termination
6533 cdl_component CYGPKG_ISO_STARTUP {
6534 # There is no associated value.
6538 # main() startup implementations
6539 # Implementations of this interface arrange for a user-supplied
6540 # main() to be called in an ISO compatible environment.
6542 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6543 # No options implement this inferface
6544 # This value cannot be modified here.
6547 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6548 # CYGINT_ISO_MAIN_STARTUP == 0
6551 # The following properties are affected by this value
6552 # interface CYGINT_ISO_MAIN_STARTUP
6553 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6556 # environ implementations
6557 # Implementations of this interface provide the environ
6558 # variable required by POSIX.
6560 cdl_interface CYGINT_ISO_ENVIRON {
6561 # No options implement this inferface
6562 # This value cannot be modified here.
6565 # Requires: 1 >= CYGINT_ISO_ENVIRON
6566 # CYGINT_ISO_ENVIRON == 0
6569 # The following properties are affected by this value
6570 # interface CYGINT_ISO_ENVIRON
6571 # Requires: 1 >= CYGINT_ISO_ENVIRON
6577 cdl_component CYGPKG_ISO_CTYPE_H {
6578 # There is no associated value.
6582 # Number of implementations of ctype functions
6584 cdl_interface CYGINT_ISO_CTYPE {
6585 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6586 # This value cannot be modified here.
6589 # Requires: 1 >= CYGINT_ISO_CTYPE
6590 # CYGINT_ISO_CTYPE == 1
6593 # The following properties are affected by this value
6594 # interface CYGINT_ISO_CTYPE
6595 # Requires: 1 >= CYGINT_ISO_CTYPE
6596 # package CYGPKG_HAL_ARM_TX27KARO
6597 # Requires: CYGINT_ISO_CTYPE
6598 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6599 # Requires: CYGINT_ISO_CTYPE
6600 # package CYGPKG_LIBC_STDLIB
6601 # Requires: CYGINT_ISO_CTYPE
6604 # Ctype implementation header
6606 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6608 # No user value, uncomment the following line to provide one.
6610 # The inferred value should not be edited directly.
6611 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6612 # value_source inferred
6613 # Default value: 0 0
6615 # The following properties are affected by this value
6616 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6617 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6618 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6619 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6625 cdl_component CYGPKG_ISO_ERRNO {
6626 # There is no associated value.
6630 # Number of implementations of error codes
6632 cdl_interface CYGINT_ISO_ERRNO_CODES {
6633 # Implemented by CYGPKG_ERROR, active, enabled
6634 # This value cannot be modified here.
6637 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6638 # CYGINT_ISO_ERRNO_CODES == 1
6641 # The following properties are affected by this value
6642 # interface CYGINT_ISO_ERRNO_CODES
6643 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6646 # Error codes implementation header
6648 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6650 # No user value, uncomment the following line to provide one.
6652 # The inferred value should not be edited directly.
6653 inferred_value 1 <cyg/error/codes.h>
6654 # value_source inferred
6655 # Default value: 0 0
6657 # The following properties are affected by this value
6658 # package CYGPKG_ERROR
6659 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6662 # Number of implementations of errno variable
6664 cdl_interface CYGINT_ISO_ERRNO {
6665 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6666 # This value cannot be modified here.
6669 # Requires: 1 >= CYGINT_ISO_ERRNO
6670 # CYGINT_ISO_ERRNO == 1
6673 # The following properties are affected by this value
6674 # interface CYGINT_ISO_ERRNO
6675 # Requires: 1 >= CYGINT_ISO_ERRNO
6678 # errno variable implementation header
6680 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6682 # No user value, uncomment the following line to provide one.
6684 # The inferred value should not be edited directly.
6685 inferred_value 1 <cyg/error/errno.h>
6686 # value_source inferred
6687 # Default value: 0 0
6689 # The following properties are affected by this value
6690 # component CYGPKG_ERROR_ERRNO
6691 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6695 # Locale-related functions
6697 cdl_component CYGPKG_ISO_LOCALE {
6698 # There is no associated value.
6702 # Number of implementations of locale functions
6704 cdl_interface CYGINT_ISO_LOCALE {
6705 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6706 # This value cannot be modified here.
6709 # Requires: 1 >= CYGINT_ISO_LOCALE
6710 # CYGINT_ISO_LOCALE == 1
6713 # The following properties are affected by this value
6714 # interface CYGINT_ISO_LOCALE
6715 # Requires: 1 >= CYGINT_ISO_LOCALE
6718 # Locale implementation header
6720 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6722 # No user value, uncomment the following line to provide one.
6724 # value_source default
6725 # Default value: 0 0
6729 # Standard I/O-related functionality
6731 cdl_component CYGPKG_ISO_STDIO {
6732 # There is no associated value.
6736 # Number of implementations of stdio file types
6738 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6739 # No options implement this inferface
6740 # This value cannot be modified here.
6742 # Current value: 0 0
6743 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6744 # CYGINT_ISO_STDIO_FILETYPES == 0
6747 # The following properties are affected by this value
6748 # interface CYGINT_ISO_STDIO_FILETYPES
6749 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6752 # Stdio file types implementation header
6754 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6756 # No user value, uncomment the following line to provide one.
6758 # value_source default
6759 # Default value: 0 0
6762 # Stdio standard streams implementations
6764 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6765 # No options implement this inferface
6766 # This value cannot be modified here.
6768 # Current value: 0 0
6769 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6770 # CYGINT_ISO_STDIO_STREAMS == 0
6773 # The following properties are affected by this value
6774 # interface CYGINT_ISO_STDIO_STREAMS
6775 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6778 # Stdio standard streams implementation header
6779 # This header file must define stdin, stdout
6782 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6784 # No user value, uncomment the following line to provide one.
6786 # value_source default
6787 # Default value: 0 0
6790 # Number of implementations of stdio file operations
6792 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6793 # No options implement this inferface
6794 # This value cannot be modified here.
6796 # Current value: 0 0
6797 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6798 # CYGINT_ISO_STDIO_FILEOPS == 0
6801 # The following properties are affected by this value
6802 # interface CYGINT_ISO_STDIO_FILEOPS
6803 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6806 # Stdio file operations implementation header
6807 # This header controls the file system operations on a file
6808 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6811 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6813 # No user value, uncomment the following line to provide one.
6815 # value_source default
6816 # Default value: 0 0
6819 # Number of implementations of stdio file access functionals
6821 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6822 # No options implement this inferface
6823 # This value cannot be modified here.
6825 # Current value: 0 0
6826 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6827 # CYGINT_ISO_STDIO_FILEACCESS == 0
6830 # The following properties are affected by this value
6831 # interface CYGINT_ISO_STDIO_FILEACCESS
6832 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6833 # option CYGFUN_COMPRESS_ZLIB_GZIO
6834 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6837 # Stdio file access implementation header
6838 # This header controls the file access operations
6839 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6840 # setvbuf(), and associated constants.
6842 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6844 # No user value, uncomment the following line to provide one.
6846 # value_source default
6847 # Default value: 0 0
6850 # Number of implementations of stdio formatted I/O
6852 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6853 # No options implement this inferface
6854 # This value cannot be modified here.
6856 # Current value: 0 0
6857 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6858 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6861 # The following properties are affected by this value
6862 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6863 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6864 # option CYGFUN_COMPRESS_ZLIB_GZIO
6865 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6868 # Stdio formatted I/O implementation header
6870 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6872 # No user value, uncomment the following line to provide one.
6874 # value_source default
6875 # Default value: 0 0
6878 # Number of implementations of stdio character I/O
6880 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6881 # No options implement this inferface
6882 # This value cannot be modified here.
6884 # Current value: 0 0
6885 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6886 # CYGINT_ISO_STDIO_CHAR_IO == 0
6889 # The following properties are affected by this value
6890 # interface CYGINT_ISO_STDIO_CHAR_IO
6891 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6894 # Stdio character I/O implementation header
6896 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6898 # No user value, uncomment the following line to provide one.
6900 # value_source default
6901 # Default value: 0 0
6904 # Number of implementations of stdio direct I/O
6906 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6907 # No options implement this inferface
6908 # This value cannot be modified here.
6910 # Current value: 0 0
6911 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6912 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6915 # The following properties are affected by this value
6916 # interface CYGINT_ISO_STDIO_DIRECT_IO
6917 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6920 # Stdio direct I/O implementation header
6922 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6924 # No user value, uncomment the following line to provide one.
6926 # value_source default
6927 # Default value: 0 0
6930 # Number of implementations of stdio file positioning
6932 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6933 # No options implement this inferface
6934 # This value cannot be modified here.
6936 # Current value: 0 0
6937 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6938 # CYGINT_ISO_STDIO_FILEPOS == 0
6941 # The following properties are affected by this value
6942 # interface CYGINT_ISO_STDIO_FILEPOS
6943 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6944 # option CYGFUN_COMPRESS_ZLIB_GZIO
6945 # Requires: CYGINT_ISO_STDIO_FILEPOS
6948 # Stdio file positioning implementation header
6950 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6952 # No user value, uncomment the following line to provide one.
6954 # value_source default
6955 # Default value: 0 0
6958 # Number of implementations of stdio error handling
6960 cdl_interface CYGINT_ISO_STDIO_ERROR {
6961 # No options implement this inferface
6962 # This value cannot be modified here.
6964 # Current value: 0 0
6965 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6966 # CYGINT_ISO_STDIO_ERROR == 0
6969 # The following properties are affected by this value
6970 # interface CYGINT_ISO_STDIO_ERROR
6971 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6974 # Stdio error handling implementation header
6976 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6978 # No user value, uncomment the following line to provide one.
6980 # value_source default
6981 # Default value: 0 0
6984 # POSIX fd-related function implementations
6986 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6987 # No options implement this inferface
6988 # This value cannot be modified here.
6990 # Current value: 0 0
6991 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6992 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6995 # The following properties are affected by this value
6996 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6997 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7000 # POSIX fd-related function implementation header
7002 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7004 # No user value, uncomment the following line to provide one.
7006 # value_source default
7007 # Default value: 0 0
7011 # Standard general utility functions
7013 cdl_component CYGPKG_ISO_STDLIB {
7014 # There is no associated value.
7018 # String conversion function implementations
7020 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7021 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7022 # This value cannot be modified here.
7025 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7026 # CYGINT_ISO_STDLIB_STRCONV == 1
7029 # The following properties are affected by this value
7030 # interface CYGINT_ISO_STDLIB_STRCONV
7031 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7034 # String conversion function implementation header
7036 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7038 # No user value, uncomment the following line to provide one.
7040 # The inferred value should not be edited directly.
7041 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7042 # value_source inferred
7043 # Default value: 0 0
7045 # The following properties are affected by this value
7046 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7047 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7050 # String to FP conversion function implementations
7052 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7053 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7054 # This value cannot be modified here.
7057 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7058 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7061 # The following properties are affected by this value
7062 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7063 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7066 # String to FP conversion function implementation header
7068 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7070 # No user value, uncomment the following line to provide one.
7072 # value_source default
7073 # Default value: 0 0
7076 # Random number generator implementations
7078 cdl_interface CYGINT_ISO_RAND {
7079 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7080 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7081 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7082 # This value cannot be modified here.
7085 # Requires: 1 >= CYGINT_ISO_RAND
7086 # CYGINT_ISO_RAND == 1
7089 # The following properties are affected by this value
7090 # interface CYGINT_ISO_RAND
7091 # Requires: 1 >= CYGINT_ISO_RAND
7094 # Random number generator implementation header
7096 cdl_option CYGBLD_ISO_RAND_HEADER {
7098 # No user value, uncomment the following line to provide one.
7100 # value_source default
7101 # Default value: 0 0
7104 # Malloc implementations
7106 cdl_interface CYGINT_ISO_MALLOC {
7107 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7108 # This value cannot be modified here.
7111 # Requires: 1 >= CYGINT_ISO_MALLOC
7112 # CYGINT_ISO_MALLOC == 1
7115 # The following properties are affected by this value
7116 # interface CYGINT_ISO_MALLOC
7117 # Requires: 1 >= CYGINT_ISO_MALLOC
7118 # option CYGFUN_LIBC_STRING_STRDUP
7119 # ActiveIf: CYGINT_ISO_MALLOC
7122 # Malloc implementation header
7124 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7126 # No user value, uncomment the following line to provide one.
7128 # value_source default
7129 # Default value: 0 0
7132 # Mallinfo() implementations
7134 cdl_interface CYGINT_ISO_MALLINFO {
7135 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7136 # This value cannot be modified here.
7139 # Requires: 1 >= CYGINT_ISO_MALLINFO
7140 # CYGINT_ISO_MALLINFO == 1
7143 # The following properties are affected by this value
7144 # interface CYGINT_ISO_MALLINFO
7145 # Requires: 1 >= CYGINT_ISO_MALLINFO
7148 # Mallinfo() implementation header
7150 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7152 # No user value, uncomment the following line to provide one.
7154 # value_source default
7155 # Default value: 0 0
7158 # Program exit functionality implementations
7160 cdl_interface CYGINT_ISO_EXIT {
7161 # No options implement this inferface
7162 # This value cannot be modified here.
7165 # Requires: 1 >= CYGINT_ISO_EXIT
7166 # CYGINT_ISO_EXIT == 0
7169 # The following properties are affected by this value
7170 # interface CYGINT_ISO_EXIT
7171 # Requires: 1 >= CYGINT_ISO_EXIT
7172 # option CYGFUN_INFRA_DUMMY_ABORT
7173 # Requires: !CYGINT_ISO_EXIT
7174 # option CYGFUN_INFRA_DUMMY_ABORT
7175 # DefaultValue: CYGINT_ISO_EXIT == 0
7178 # Program exit functionality implementation header
7180 cdl_option CYGBLD_ISO_EXIT_HEADER {
7182 # No user value, uncomment the following line to provide one.
7184 # value_source default
7185 # Default value: 0 0
7188 # Program environment implementations
7190 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7191 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7192 # This value cannot be modified here.
7195 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7196 # CYGINT_ISO_STDLIB_ENVIRON == 1
7199 # The following properties are affected by this value
7200 # interface CYGINT_ISO_STDLIB_ENVIRON
7201 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7204 # Program environment implementation header
7206 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7208 # No user value, uncomment the following line to provide one.
7210 # value_source default
7211 # Default value: 0 0
7214 # system() implementations
7216 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7217 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7218 # This value cannot be modified here.
7221 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7222 # CYGINT_ISO_STDLIB_SYSTEM == 1
7225 # The following properties are affected by this value
7226 # interface CYGINT_ISO_STDLIB_SYSTEM
7227 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7230 # system() implementation header
7232 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7234 # No user value, uncomment the following line to provide one.
7236 # value_source default
7237 # Default value: 0 0
7240 # bsearch() implementations
7242 cdl_interface CYGINT_ISO_BSEARCH {
7243 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7244 # This value cannot be modified here.
7247 # Requires: 1 >= CYGINT_ISO_BSEARCH
7248 # CYGINT_ISO_BSEARCH == 1
7251 # The following properties are affected by this value
7252 # interface CYGINT_ISO_BSEARCH
7253 # Requires: 1 >= CYGINT_ISO_BSEARCH
7256 # bsearch() implementation header
7258 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7260 # No user value, uncomment the following line to provide one.
7262 # value_source default
7263 # Default value: 0 0
7266 # qsort() implementations
7268 cdl_interface CYGINT_ISO_QSORT {
7269 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7270 # This value cannot be modified here.
7273 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7274 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7277 # The following properties are affected by this value
7280 # qsort() implementation header
7282 cdl_option CYGBLD_ISO_QSORT_HEADER {
7284 # No user value, uncomment the following line to provide one.
7286 # value_source default
7287 # Default value: 0 0
7290 # abs()/labs() implementations
7292 cdl_interface CYGINT_ISO_ABS {
7293 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7294 # This value cannot be modified here.
7297 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7298 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7301 # The following properties are affected by this value
7304 # abs()/labs() implementation header
7306 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7308 # No user value, uncomment the following line to provide one.
7310 # The inferred value should not be edited directly.
7311 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7312 # value_source inferred
7313 # Default value: 0 0
7315 # The following properties are affected by this value
7316 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7317 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7320 # div()/ldiv() implementations
7322 cdl_interface CYGINT_ISO_DIV {
7323 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7324 # This value cannot be modified here.
7327 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7328 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7331 # The following properties are affected by this value
7334 # div()/ldiv() implementation header
7336 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7338 # No user value, uncomment the following line to provide one.
7340 # The inferred value should not be edited directly.
7341 inferred_value 1 <cyg/libc/stdlib/div.inl>
7342 # value_source inferred
7343 # Default value: 0 0
7345 # The following properties are affected by this value
7346 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7347 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7350 # Header defining the implementation's MB_CUR_MAX
7352 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7354 # No user value, uncomment the following line to provide one.
7356 # value_source default
7357 # Default value: 0 0
7359 # The following properties are affected by this value
7360 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7361 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7364 # Multibyte character implementations
7366 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7367 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7368 # This value cannot be modified here.
7371 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7372 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7375 # The following properties are affected by this value
7376 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7377 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7380 # Multibyte character implementation header
7382 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7384 # No user value, uncomment the following line to provide one.
7386 # value_source default
7387 # Default value: 0 0
7393 cdl_component CYGPKG_ISO_STRING {
7394 # There is no associated value.
7398 # Number of implementations of strerror() function
7400 cdl_interface CYGINT_ISO_STRERROR {
7401 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7402 # This value cannot be modified here.
7404 # Current value: 1 1
7405 # Requires: 1 >= CYGINT_ISO_STRERROR
7406 # CYGINT_ISO_STRERROR == 1
7409 # The following properties are affected by this value
7410 # interface CYGINT_ISO_STRERROR
7411 # Requires: 1 >= CYGINT_ISO_STRERROR
7414 # strerror() implementation header
7416 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7418 # No user value, uncomment the following line to provide one.
7420 # The inferred value should not be edited directly.
7421 inferred_value 1 <cyg/error/strerror.h>
7422 # value_source inferred
7423 # Default value: 0 0
7425 # The following properties are affected by this value
7426 # option CYGPKG_ERROR_STRERROR
7427 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7430 # memcpy() implementation header
7432 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7434 # No user value, uncomment the following line to provide one.
7436 # value_source default
7437 # Default value: 0 0
7440 # memset() implementation header
7442 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7444 # No user value, uncomment the following line to provide one.
7446 # value_source default
7447 # Default value: 0 0
7450 # Number of implementations of strtok_r() function
7452 cdl_interface CYGINT_ISO_STRTOK_R {
7453 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7454 # This value cannot be modified here.
7456 # Current value: 1 1
7457 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7458 # CYGINT_ISO_STRTOK_R == 1
7461 # The following properties are affected by this value
7462 # interface CYGINT_ISO_STRTOK_R
7463 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7466 # strtok_r() implementation header
7468 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7470 # No user value, uncomment the following line to provide one.
7472 # The inferred value should not be edited directly.
7473 inferred_value 1 <cyg/libc/string/string.h>
7474 # value_source inferred
7475 # Default value: 0 0
7477 # The following properties are affected by this value
7478 # package CYGPKG_LIBC_STRING
7479 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7482 # Number of implementations of locale-specific string functions
7483 # This covers locale-dependent string functions such as strcoll()
7486 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7487 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7488 # This value cannot be modified here.
7490 # Current value: 1 1
7491 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7492 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7495 # The following properties are affected by this value
7496 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7497 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7500 # Locale-specific string functions' implementation header
7501 # This covers locale-dependent string functions such as strcoll()
7504 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7506 # No user value, uncomment the following line to provide one.
7508 # The inferred value should not be edited directly.
7509 inferred_value 1 <cyg/libc/string/string.h>
7510 # value_source inferred
7511 # Default value: 0 0
7513 # The following properties are affected by this value
7514 # package CYGPKG_LIBC_STRING
7515 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7518 # Number of implementations of BSD string functions
7520 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7521 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7522 # This value cannot be modified here.
7524 # Current value: 0 0
7525 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7526 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7529 # The following properties are affected by this value
7530 # interface CYGINT_ISO_STRING_BSD_FUNCS
7531 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7534 # BSD string functions' implementation header
7536 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7538 # No user value, uncomment the following line to provide one.
7540 # The inferred value should not be edited directly.
7541 inferred_value 1 <cyg/libc/string/bsdstring.h>
7542 # value_source inferred
7543 # Default value: 0 0
7545 # The following properties are affected by this value
7546 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7547 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7550 # Number of implementations of other mem*() functions
7552 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7553 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7554 # This value cannot be modified here.
7556 # Current value: 1 1
7557 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7558 # CYGINT_ISO_STRING_MEMFUNCS == 1
7561 # The following properties are affected by this value
7562 # interface CYGINT_ISO_STRING_MEMFUNCS
7563 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7564 # component CYGBLD_BUILD_REDBOOT
7565 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7566 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7567 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7570 # Other mem*() functions' implementation header
7572 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7574 # No user value, uncomment the following line to provide one.
7576 # The inferred value should not be edited directly.
7577 inferred_value 1 <cyg/libc/string/string.h>
7578 # value_source inferred
7579 # Default value: 0 0
7581 # The following properties are affected by this value
7582 # package CYGPKG_LIBC_STRING
7583 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7586 # Number of implementations of other ISO C str*() functions
7587 # This covers the other str*() functions defined by ISO C.
7589 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7590 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7591 # This value cannot be modified here.
7593 # Current value: 1 1
7594 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7595 # CYGINT_ISO_STRING_STRFUNCS == 1
7598 # The following properties are affected by this value
7599 # interface CYGINT_ISO_STRING_STRFUNCS
7600 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7601 # option CYGFUN_INFRA_DUMMY_STRLEN
7602 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7603 # option CYGFUN_INFRA_DUMMY_STRLEN
7604 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7605 # component CYGBLD_BUILD_REDBOOT
7606 # Requires: CYGINT_ISO_STRING_STRFUNCS
7607 # component CYGPKG_IO_ETH_DRIVERS_NET
7608 # Requires: CYGINT_ISO_STRING_STRFUNCS
7609 # option CYGFUN_COMPRESS_ZLIB_GZIO
7610 # Requires: CYGINT_ISO_STRING_STRFUNCS
7611 # package CYGPKG_IO_FLASH
7612 # Requires: CYGINT_ISO_STRING_STRFUNCS
7613 # package CYGPKG_LIBC_STDLIB
7614 # Requires: CYGINT_ISO_STRING_STRFUNCS
7617 # Other ISO C str*() functions' implementation header
7618 # This covers the other str*() functions defined by ISO C.
7620 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7622 # No user value, uncomment the following line to provide one.
7624 # The inferred value should not be edited directly.
7625 inferred_value 1 <cyg/libc/string/string.h>
7626 # value_source inferred
7627 # Default value: 0 0
7629 # The following properties are affected by this value
7630 # package CYGPKG_LIBC_STRING
7631 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7635 # Clock and time functionality
7637 cdl_component CYGPKG_ISO_TIME {
7638 # There is no associated value.
7642 # time_t implementation header
7644 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7646 # No user value, uncomment the following line to provide one.
7648 # value_source default
7649 # Default value: 0 0
7652 # clock_t implementation header
7654 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7656 # No user value, uncomment the following line to provide one.
7658 # value_source default
7659 # Default value: 0 0
7662 # struct timeval implementation header
7664 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7666 # No user value, uncomment the following line to provide one.
7668 # value_source default
7669 # Default value: 0 0
7672 # fnmatch implementation header
7674 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7676 # No user value, uncomment the following line to provide one.
7678 # value_source default
7679 # Default value: 0 0
7682 # Number of implementations of POSIX timer types
7684 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7685 # No options implement this inferface
7686 # This value cannot be modified here.
7688 # Current value: 0 0
7689 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7690 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7693 # The following properties are affected by this value
7694 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7695 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7698 # POSIX timer types implementation header
7700 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7702 # No user value, uncomment the following line to provide one.
7704 # value_source default
7705 # Default value: 0 0
7708 # Number of implementations of POSIX clock types
7710 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7711 # No options implement this inferface
7712 # This value cannot be modified here.
7714 # Current value: 0 0
7715 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7716 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7719 # The following properties are affected by this value
7720 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7721 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7724 # POSIX clock types implementation header
7726 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7728 # No user value, uncomment the following line to provide one.
7730 # value_source default
7731 # Default value: 0 0
7734 # Number of implementations of ISO C types
7736 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7737 # No options implement this inferface
7738 # This value cannot be modified here.
7740 # Current value: 0 0
7741 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7742 # CYGINT_ISO_C_TIME_TYPES == 0
7745 # The following properties are affected by this value
7746 # interface CYGINT_ISO_C_TIME_TYPES
7747 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7750 # ISO C time types implementation header
7752 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7754 # No user value, uncomment the following line to provide one.
7756 # value_source default
7757 # Default value: 0 0
7760 # Number of implementations of POSIX timers
7762 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7763 # No options implement this inferface
7764 # This value cannot be modified here.
7766 # Current value: 0 0
7767 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7768 # CYGINT_ISO_POSIX_TIMERS == 0
7771 # The following properties are affected by this value
7772 # interface CYGINT_ISO_POSIX_TIMERS
7773 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7776 # POSIX timer implementation header
7778 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7780 # No user value, uncomment the following line to provide one.
7782 # value_source default
7783 # Default value: 0 0
7786 # Number of implementations of POSIX clocks
7788 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7789 # No options implement this inferface
7790 # This value cannot be modified here.
7792 # Current value: 0 0
7793 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7794 # CYGINT_ISO_POSIX_CLOCKS == 0
7797 # The following properties are affected by this value
7798 # interface CYGINT_ISO_POSIX_CLOCKS
7799 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7802 # POSIX clocks implementation header
7804 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7806 # No user value, uncomment the following line to provide one.
7808 # value_source default
7809 # Default value: 0 0
7812 # Number of implementations of ISO C clock functions
7814 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7815 # No options implement this inferface
7816 # This value cannot be modified here.
7818 # Current value: 0 0
7819 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7820 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7823 # The following properties are affected by this value
7824 # interface CYGINT_ISO_C_CLOCK_FUNCS
7825 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7828 # ISO C clock functions' implementation header
7830 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7832 # No user value, uncomment the following line to provide one.
7834 # value_source default
7835 # Default value: 0 0
7838 # Number of implementations of tzset() function
7840 cdl_interface CYGINT_ISO_TZSET {
7841 # No options implement this inferface
7842 # This value cannot be modified here.
7844 # Current value: 0 0
7845 # Requires: 1 >= CYGINT_ISO_TZSET
7846 # CYGINT_ISO_TZSET == 0
7849 # The following properties are affected by this value
7850 # interface CYGINT_ISO_TZSET
7851 # Requires: 1 >= CYGINT_ISO_TZSET
7854 # tzset() implementation header
7856 cdl_option CYGBLD_ISO_TZSET_HEADER {
7858 # No user value, uncomment the following line to provide one.
7860 # value_source default
7861 # Default value: 0 0
7865 # Signal functionality
7867 cdl_component CYGPKG_ISO_SIGNAL {
7868 # There is no associated value.
7872 # Number of implementations of signal numbers
7874 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7875 # No options implement this inferface
7876 # This value cannot be modified here.
7879 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7880 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7883 # The following properties are affected by this value
7884 # interface CYGINT_ISO_SIGNAL_NUMBERS
7885 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7888 # Signal numbering implementation header
7889 # This header provides the mapping of signal
7890 # names (e.g. SIGBUS) to numbers.
7892 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7894 # No user value, uncomment the following line to provide one.
7896 # value_source default
7897 # Default value: 0 0
7900 # Number of signal implementations
7902 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7903 # No options implement this inferface
7904 # This value cannot be modified here.
7907 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7908 # CYGINT_ISO_SIGNAL_IMPL == 0
7911 # The following properties are affected by this value
7912 # interface CYGINT_ISO_SIGNAL_IMPL
7913 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7916 # Signals implementation header
7918 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7920 # No user value, uncomment the following line to provide one.
7922 # value_source default
7923 # Default value: 0 0
7926 # POSIX real time signals feature test macro
7927 # This defines the POSIX feature test macro
7928 # that indicates that the POSIX real time signals
7931 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7932 # No options implement this inferface
7933 # This value cannot be modified here.
7936 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7937 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7940 # The following properties are affected by this value
7941 # interface CYGINT_POSIX_REALTIME_SIGNALS
7942 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7946 # Non-local jumps functionality
7948 cdl_component CYGPKG_ISO_SETJMP {
7949 # There is no associated value.
7953 # setjmp() / longjmp() implementations
7955 cdl_interface CYGINT_ISO_SETJMP {
7956 # No options implement this inferface
7957 # This value cannot be modified here.
7960 # Requires: 1 >= CYGINT_ISO_SETJMP
7961 # CYGINT_ISO_SETJMP == 0
7964 # The following properties are affected by this value
7965 # interface CYGINT_ISO_SETJMP
7966 # Requires: 1 >= CYGINT_ISO_SETJMP
7969 # setjmp() / longjmp() implementation header
7971 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7973 # No user value, uncomment the following line to provide one.
7975 # value_source default
7976 # Default value: 0 0
7979 # sigsetjmp() / siglongjmp() implementations
7981 cdl_interface CYGINT_ISO_SIGSETJMP {
7982 # No options implement this inferface
7983 # This value cannot be modified here.
7986 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7987 # CYGINT_ISO_SIGSETJMP == 0
7990 # The following properties are affected by this value
7991 # interface CYGINT_ISO_SIGSETJMP
7992 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7995 # sigsetjmp() / siglongjmp() implementation header
7997 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
7999 # No user value, uncomment the following line to provide one.
8001 # value_source default
8002 # Default value: 0 0
8006 # Assertions implementation header
8008 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8010 # No user value, uncomment the following line to provide one.
8012 # value_source default
8013 # Default value: 0 0
8016 # POSIX file control
8017 # This covers the POSIX file control definitions,
8018 # normally found in <fcntl.h>
8020 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8021 # There is no associated value.
8025 # POSIX open flags implementation header
8027 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8029 # No user value, uncomment the following line to provide one.
8031 # value_source default
8032 # Default value: 0 0
8035 # POSIX fcntl() implementations
8037 cdl_interface CYGINT_ISO_FCNTL {
8038 # No options implement this inferface
8039 # This value cannot be modified here.
8042 # Requires: 1 >= CYGINT_ISO_FCNTL
8043 # CYGINT_ISO_FCNTL == 0
8046 # The following properties are affected by this value
8047 # interface CYGINT_ISO_FCNTL
8048 # Requires: 1 >= CYGINT_ISO_FCNTL
8051 # POSIX fcntl() implementation header
8053 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8055 # No user value, uncomment the following line to provide one.
8057 # value_source default
8058 # Default value: 0 0
8061 # POSIX file open implementations
8063 cdl_interface CYGINT_ISO_OPEN {
8064 # No options implement this inferface
8065 # This value cannot be modified here.
8068 # Requires: 1 >= CYGINT_ISO_OPEN
8069 # CYGINT_ISO_OPEN == 0
8072 # The following properties are affected by this value
8073 # interface CYGINT_ISO_OPEN
8074 # Requires: 1 >= CYGINT_ISO_OPEN
8077 # POSIX file open implementation header
8079 cdl_option CYGBLD_ISO_OPEN_HEADER {
8081 # No user value, uncomment the following line to provide one.
8083 # value_source default
8084 # Default value: 0 0
8088 # <sys/stat.h> definitions implementation header
8090 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8092 # No user value, uncomment the following line to provide one.
8094 # value_source default
8095 # Default value: 0 0
8098 # POSIX directory reading implementation
8100 cdl_interface CYGINT_ISO_DIRENT {
8101 # No options implement this inferface
8102 # This value cannot be modified here.
8105 # Requires: 1 >= CYGINT_ISO_DIRENT
8106 # CYGINT_ISO_DIRENT == 0
8109 # The following properties are affected by this value
8110 # interface CYGINT_ISO_DIRENT
8111 # Requires: 1 >= CYGINT_ISO_DIRENT
8114 # <dirent.h> definitions implementation header
8116 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8118 # No user value, uncomment the following line to provide one.
8120 # value_source default
8121 # Default value: 0 0
8124 # POSIX <sys/types.h> contents
8125 # This covers the types required by POSIX to be in
8128 cdl_component CYGPKG_ISO_POSIX_TYPES {
8129 # There is no associated value.
8133 # POSIX thread types implementations
8135 cdl_interface CYGINT_ISO_PTHREADTYPES {
8136 # No options implement this inferface
8137 # This value cannot be modified here.
8140 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8141 # CYGINT_ISO_PTHREADTYPES == 0
8144 # The following properties are affected by this value
8145 # interface CYGINT_ISO_PTHREADTYPES
8146 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8147 # interface CYGINT_ISO_PMUTEXTYPES
8148 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8151 # POSIX thread types implementation header
8153 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8155 # No user value, uncomment the following line to provide one.
8157 # value_source default
8158 # Default value: 0 0
8161 # POSIX mutex types implementations
8163 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8164 # No options implement this inferface
8165 # This value cannot be modified here.
8168 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8169 # CYGINT_ISO_PTHREADTYPES == 0
8173 # POSIX mutex types implementation header
8175 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8177 # No user value, uncomment the following line to provide one.
8179 # value_source default
8180 # Default value: 0 0
8183 # ssize_t implementation header
8185 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8187 # No user value, uncomment the following line to provide one.
8189 # value_source default
8190 # Default value: 0 0
8193 # Filesystem types implementation header
8195 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8197 # No user value, uncomment the following line to provide one.
8199 # value_source default
8200 # Default value: 0 0
8203 # gid_t, pid_t, uid_t implementation header
8205 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8207 # No user value, uncomment the following line to provide one.
8209 # value_source default
8210 # Default value: 0 0
8214 # Non-POSIX <sys/types.h> contents
8215 # This covers the extra types required by non-POSIX
8216 # packages to be in <sys/types.h>. These would normally
8217 # only be visible if _POSIX_SOURCE is not defined.
8219 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8220 # There is no associated value.
8224 # BSD compatible types
8226 cdl_interface CYGINT_ISO_BSDTYPES {
8227 # No options implement this inferface
8228 # This value cannot be modified here.
8231 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8232 # CYGINT_ISO_BSDTYPES == 0
8235 # The following properties are affected by this value
8236 # interface CYGINT_ISO_BSDTYPES
8237 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8242 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8244 # No user value, uncomment the following line to provide one.
8246 # value_source default
8247 # Default value: 0 0
8253 cdl_component CYGPKG_ISO_UTSNAME {
8254 # There is no associated value.
8260 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8262 # No user value, uncomment the following line to provide one.
8264 # value_source default
8265 # Default value: 0 0
8271 cdl_component CYGPKG_ISO_SCHED {
8272 # There is no associated value.
8276 # POSIX scheduler implementations
8278 cdl_interface CYGINT_ISO_SCHED_IMPL {
8279 # No options implement this inferface
8280 # This value cannot be modified here.
8283 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8284 # CYGINT_ISO_SCHED_IMPL == 0
8287 # The following properties are affected by this value
8288 # interface CYGINT_ISO_SCHED_IMPL
8289 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8292 # POSIX scheduler implementation header
8294 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8296 # No user value, uncomment the following line to provide one.
8298 # value_source default
8299 # Default value: 0 0
8305 cdl_component CYGPKG_ISO_SEMAPHORES {
8306 # There is no associated value.
8310 # POSIX semaphore implementations
8312 cdl_interface CYGINT_ISO_SEMAPHORES {
8313 # No options implement this inferface
8314 # This value cannot be modified here.
8317 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8318 # CYGINT_ISO_SEMAPHORES == 0
8321 # The following properties are affected by this value
8322 # interface CYGINT_ISO_SEMAPHORES
8323 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8326 # POSIX semaphore implementation header
8328 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8330 # No user value, uncomment the following line to provide one.
8332 # value_source default
8333 # Default value: 0 0
8337 # POSIX message queues
8339 cdl_component CYGPKG_ISO_MQUEUE {
8340 # There is no associated value.
8346 cdl_interface CYGINT_ISO_MQUEUE {
8347 # No options implement this inferface
8348 # This value cannot be modified here.
8351 # Requires: 1 >= CYGINT_ISO_MQUEUE
8352 # CYGINT_ISO_MQUEUE == 0
8355 # The following properties are affected by this value
8356 # interface CYGINT_ISO_MQUEUE
8357 # Requires: 1 >= CYGINT_ISO_MQUEUE
8358 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8359 # ActiveIf: CYGINT_ISO_MQUEUE
8360 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8361 # ActiveIf: CYGINT_ISO_MQUEUE
8364 # Implementation header
8366 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8368 # No user value, uncomment the following line to provide one.
8370 # value_source default
8371 # Default value: 0 0
8374 # Maximum number of open message queues
8376 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8377 # This option is not active
8378 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8379 # CYGINT_ISO_MQUEUE == 0
8383 # No user value, uncomment the following line to provide one.
8385 # value_source default
8386 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8387 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8388 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8392 # Maximum number of message priorities
8394 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8395 # This option is not active
8396 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8397 # CYGINT_ISO_MQUEUE == 0
8401 # No user value, uncomment the following line to provide one.
8402 # user_value 1 65535
8403 # value_source default
8404 # Default value: 1 65535
8410 cdl_component CYGPKG_ISO_PTHREAD {
8411 # There is no associated value.
8415 # POSIX pthread implementations
8417 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8418 # No options implement this inferface
8419 # This value cannot be modified here.
8421 # Current value: 0 0
8422 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8423 # CYGINT_ISO_PTHREAD_IMPL == 0
8426 # The following properties are affected by this value
8427 # interface CYGINT_ISO_PTHREAD_IMPL
8428 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8431 # POSIX pthread implementation header
8433 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8435 # No user value, uncomment the following line to provide one.
8437 # value_source default
8438 # Default value: 0 0
8441 # POSIX mutex/cond var implementations
8443 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8444 # No options implement this inferface
8445 # This value cannot be modified here.
8447 # Current value: 0 0
8448 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8449 # CYGINT_ISO_PTHREAD_MUTEX == 0
8452 # The following properties are affected by this value
8453 # interface CYGINT_ISO_PTHREAD_MUTEX
8454 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8457 # POSIX mutex/cond var implementation header
8459 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8461 # No user value, uncomment the following line to provide one.
8463 # value_source default
8464 # Default value: 0 0
8470 cdl_component CYGPKG_ISO_LIMITS {
8471 # There is no associated value.
8475 # POSIX pthread limits implementations
8477 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8478 # No options implement this inferface
8479 # This value cannot be modified here.
8482 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8483 # CYGINT_ISO_POSIX_LIMITS == 0
8486 # The following properties are affected by this value
8487 # interface CYGINT_ISO_POSIX_LIMITS
8488 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8491 # POSIX pthread limits implementation header
8493 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8495 # No user value, uncomment the following line to provide one.
8497 # value_source default
8498 # Default value: 0 0
8501 # OPEN_MAX implementation header
8503 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8505 # No user value, uncomment the following line to provide one.
8507 # value_source default
8508 # Default value: 0 0
8511 # LINK_MAX implementation header
8513 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8515 # No user value, uncomment the following line to provide one.
8517 # value_source default
8518 # Default value: 0 0
8521 # NAME_MAX implementation header
8523 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8525 # No user value, uncomment the following line to provide one.
8527 # value_source default
8528 # Default value: 0 0
8531 # PATH_MAX implementation header
8533 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8535 # No user value, uncomment the following line to provide one.
8537 # value_source default
8538 # Default value: 0 0
8544 cdl_component CYGPKG_ISO_TERMIOS {
8545 # There is no associated value.
8549 # POSIX termios implementations
8551 cdl_interface CYGINT_ISO_TERMIOS {
8552 # No options implement this inferface
8553 # This value cannot be modified here.
8556 # Requires: 1 >= CYGINT_ISO_TERMIOS
8557 # CYGINT_ISO_TERMIOS == 0
8560 # The following properties are affected by this value
8561 # interface CYGINT_ISO_TERMIOS
8562 # Requires: 1 >= CYGINT_ISO_TERMIOS
8565 # POSIX termios implementation header
8567 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8569 # No user value, uncomment the following line to provide one.
8571 # value_source default
8572 # Default value: 0 0
8578 cdl_component CYGPKG_ISO_DLFCN {
8579 # There is no associated value.
8583 # Dynamic load implementations
8585 cdl_interface CYGINT_ISO_DLFCN {
8586 # No options implement this inferface
8587 # This value cannot be modified here.
8590 # Requires: 1 >= CYGINT_ISO_DLFCN
8591 # CYGINT_ISO_DLFCN == 0
8594 # The following properties are affected by this value
8595 # interface CYGINT_ISO_DLFCN
8596 # Requires: 1 >= CYGINT_ISO_DLFCN
8599 # Dynamic load implementation header
8601 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8603 # No user value, uncomment the following line to provide one.
8605 # value_source default
8606 # Default value: 0 0
8610 # UNIX standard functions
8612 cdl_component CYGPKG_ISO_UNISTD {
8613 # There is no associated value.
8617 # POSIX timer operations implementations
8619 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8620 # No options implement this inferface
8621 # This value cannot be modified here.
8623 # Current value: 0 0
8624 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8625 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8628 # The following properties are affected by this value
8629 # interface CYGINT_ISO_POSIX_TIMER_OPS
8630 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8633 # POSIX timer operations implementation header
8635 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8637 # No user value, uncomment the following line to provide one.
8639 # value_source default
8640 # Default value: 0 0
8643 # POSIX sleep() implementations
8645 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8646 # No options implement this inferface
8647 # This value cannot be modified here.
8649 # Current value: 0 0
8650 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8651 # CYGINT_ISO_POSIX_SLEEP == 0
8654 # The following properties are affected by this value
8655 # interface CYGINT_ISO_POSIX_SLEEP
8656 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8659 # POSIX sleep() implementation header
8661 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8663 # No user value, uncomment the following line to provide one.
8665 # value_source default
8666 # Default value: 0 0
8670 # select()/poll() functions
8672 cdl_component CYGPKG_ISO_SELECT {
8673 # There is no associated value.
8677 # select() implementations
8679 cdl_interface CYGINT_ISO_SELECT {
8680 # No options implement this inferface
8681 # This value cannot be modified here.
8683 # Current value: 0 0
8684 # Requires: 1 >= CYGINT_ISO_SELECT
8685 # CYGINT_ISO_SELECT == 0
8688 # The following properties are affected by this value
8689 # interface CYGINT_ISO_SELECT
8690 # Requires: 1 >= CYGINT_ISO_SELECT
8693 # select() implementation header
8695 cdl_option CYGBLD_ISO_SELECT_HEADER {
8697 # No user value, uncomment the following line to provide one.
8699 # value_source default
8700 # Default value: 0 0
8703 # poll() implementations
8705 cdl_interface CYGINT_ISO_POLL {
8706 # No options implement this inferface
8707 # This value cannot be modified here.
8709 # Current value: 0 0
8710 # Requires: 1 >= CYGINT_ISO_POLL
8711 # CYGINT_ISO_POLL == 0
8714 # The following properties are affected by this value
8715 # interface CYGINT_ISO_POLL
8716 # Requires: 1 >= CYGINT_ISO_POLL
8719 # poll() implementation header
8721 cdl_option CYGBLD_ISO_POLL_HEADER {
8723 # No user value, uncomment the following line to provide one.
8725 # value_source default
8726 # Default value: 0 0
8730 # NetDB utility functions
8732 cdl_component CYGPKG_ISO_NETDB {
8733 # There is no associated value.
8737 # DNS implementations
8739 cdl_interface CYGINT_ISO_DNS {
8740 # No options implement this inferface
8741 # This value cannot be modified here.
8744 # Requires: 1 >= CYGINT_ISO_DNS
8745 # CYGINT_ISO_DNS == 0
8748 # The following properties are affected by this value
8749 # interface CYGINT_ISO_DNS
8750 # Requires: 1 >= CYGINT_ISO_DNS
8753 # DNS implementation header
8755 cdl_option CYGBLD_ISO_DNS_HEADER {
8757 # No user value, uncomment the following line to provide one.
8759 # value_source default
8760 # Default value: 0 0
8763 # Protocol network database implementations
8765 cdl_interface CYGINT_ISO_NETDB_PROTO {
8766 # No options implement this inferface
8767 # This value cannot be modified here.
8770 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8771 # CYGINT_ISO_NETDB_PROTO == 0
8774 # The following properties are affected by this value
8775 # interface CYGINT_ISO_NETDB_PROTO
8776 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8779 # Protocol network database implementation header
8781 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8783 # No user value, uncomment the following line to provide one.
8785 # value_source default
8786 # Default value: 0 0
8789 # Services network database implementations
8791 cdl_interface CYGINT_ISO_NETDB_SERV {
8792 # No options implement this inferface
8793 # This value cannot be modified here.
8796 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8797 # CYGINT_ISO_NETDB_SERV == 0
8800 # The following properties are affected by this value
8801 # interface CYGINT_ISO_NETDB_SERV
8802 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8805 # Services network database implementation header
8807 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8809 # No user value, uncomment the following line to provide one.
8811 # value_source default
8812 # Default value: 0 0
8817 # Package specific build options including control over
8818 # compiler flags used only in building this package,
8819 # and details of which tests are built.
8821 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8822 # There is no associated value.
8826 # Additional compiler flags
8827 # This option modifies the set of compiler flags for
8828 # building the ISO C and POSIX infrastructure package.
8829 # These flags are used in addition to the set of global flags.
8831 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8833 # No user value, uncomment the following line to provide one.
8835 # value_source default
8839 # Suppressed compiler flags
8840 # This option modifies the set of compiler flags for
8841 # building the ISO C and POSIX infrastructure package.
8842 # These flags are removed from the set of global flags
8845 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8847 # No user value, uncomment the following line to provide one.
8849 # value_source default
8856 # doc: ref/services-crc.html
8857 # This package provides support for CRC calculation. Currently
8858 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8859 # Gary S. Brown, and a 16 bit CRC.
8861 cdl_package CYGPKG_CRC {
8862 # Packages cannot be added or removed, nor can their version be changed,
8863 # simply by editing their value. Instead the appropriate configuration
8864 # should be used to perform these actions.
8866 # This value cannot be modified here.
8868 # Current value: 1 current
8870 # The following properties are affected by this value
8871 # package CYGPKG_COMPRESS_ZLIB
8872 # Requires: CYGPKG_CRC
8878 cdl_option CYGPKG_CRC_TESTS {
8879 # Calculated value: "tests/crc_test"
8881 # Current_value: tests/crc_test
8885 # Zlib compress and decompress package
8886 # This package provides support for compression and
8889 cdl_package CYGPKG_COMPRESS_ZLIB {
8890 # Packages cannot be added or removed, nor can their version be changed,
8891 # simply by editing their value. Instead the appropriate configuration
8892 # should be used to perform these actions.
8894 # This value cannot be modified here.
8896 # Current value: 1 current
8897 # Requires: CYGPKG_ISOINFRA
8898 # CYGPKG_ISOINFRA == current
8900 # Requires: CYGPKG_CRC
8901 # CYGPKG_CRC == current
8904 # The following properties are affected by this value
8905 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8906 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8910 # Override memory allocation routines.
8912 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8913 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8914 # This value cannot be modified here.
8918 # The following properties are affected by this value
8919 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8920 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8923 # Should deflate() produce 'gzip' compatible output?
8924 # If this option is set then the output of calling deflate()
8925 # will be wrapped up as a 'gzip' compatible file.
8927 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8929 # No user value, uncomment the following line to provide one.
8931 # value_source default
8935 # Does this library need malloc?
8936 # This pseudo-option will force the memalloc library to be
8937 # required iff the application does not provide it's own
8940 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8941 # This option is not active
8942 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8943 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8947 # No user value, uncomment the following line to provide one.
8949 # value_source default
8951 # Requires: CYGPKG_MEMALLOC
8952 # CYGPKG_MEMALLOC == current
8956 # Include stdio-like utility functions
8957 # This option enables the stdio-like zlib utility functions
8958 # (gzread/gzwrite and friends) provided in gzio.c.
8960 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8962 # No user value, uncomment the following line to provide one.
8964 # value_source default
8965 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8966 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8968 # Requires: CYGINT_ISO_STDIO_FILEPOS
8969 # CYGINT_ISO_STDIO_FILEPOS == 0
8971 # Requires: CYGINT_ISO_STRING_STRFUNCS
8972 # CYGINT_ISO_STRING_STRFUNCS == 1
8974 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8975 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8977 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8978 # CYGINT_ISO_STDIO_FILEACCESS == 0
8982 # Zlib compress and decompress package build options
8983 # Package specific build options including control over
8984 # compiler flags used only in building this package,
8985 # and details of which tests are built.
8987 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8988 # There is no associated value.
8992 # Additional compiler flags
8993 # This option modifies the set of compiler flags for
8994 # building this package. These flags are used in addition
8995 # to the set of global flags.
8997 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
8999 # No user value, uncomment the following line to provide one.
9000 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9001 # value_source default
9002 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9005 # Suppressed compiler flags
9006 # This option modifies the set of compiler flags for
9007 # building this package. These flags are removed from
9008 # the set of global flags if present.
9010 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9012 # No user value, uncomment the following line to provide one.
9013 # user_value -Wstrict-prototypes
9014 # value_source default
9015 # Default value: -Wstrict-prototypes
9018 # Additional compiler flags
9019 # This option modifies the set of compiler flags for
9020 # building this package. These flags are used in addition
9021 # to the set of global flags.
9023 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9025 # No user value, uncomment the following line to provide one.
9027 # value_source default
9031 # Suppressed compiler flags
9032 # This option modifies the set of compiler flags for
9033 # building this package. These flags are removed from
9034 # the set of global flags if present.
9036 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9038 # No user value, uncomment the following line to provide one.
9040 # value_source default
9047 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9048 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9050 # Current_value: tests/zlib1.c tests/zlib2.c
9054 # FLASH device drivers
9055 # doc: ref/flash.html
9056 # This option enables drivers for basic I/O services on
9059 cdl_package CYGPKG_IO_FLASH {
9060 # Packages cannot be added or removed, nor can their version be changed,
9061 # simply by editing their value. Instead the appropriate configuration
9062 # should be used to perform these actions.
9064 # This value cannot be modified here.
9066 # Current value: 1 current
9067 # Requires: CYGPKG_ISOINFRA
9068 # CYGPKG_ISOINFRA == current
9070 # Requires: CYGINT_ISO_STRING_STRFUNCS
9071 # CYGINT_ISO_STRING_STRFUNCS == 1
9074 # The following properties are affected by this value
9075 # component CYGSEM_REDBOOT_FLASH_CONFIG
9076 # DefaultValue: CYGPKG_IO_FLASH != 0
9077 # package CYGPKG_DEVS_FLASH_ONMXC
9078 # ActiveIf: CYGPKG_IO_FLASH
9082 # Hardware FLASH device drivers
9083 # This option enables the hardware device drivers
9084 # for the current platform.
9086 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9087 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9088 # This value cannot be modified here.
9092 # The following properties are affected by this value
9093 # component CYGPKG_REDBOOT_FLASH
9094 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9097 # Hardware FLASH device drivers are not in RAM
9098 # Use of this interface is deprecated.
9099 # Drivers should make sure that the functions are
9100 # linked to RAM by putting them in .2ram sections.
9102 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9103 # No options implement this inferface
9104 # This value cannot be modified here.
9106 # Current value: 0 0
9107 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9108 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9111 # The following properties are affected by this value
9112 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9113 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9116 # Hardware can support block locking
9117 # This option will be enabled by devices which can support
9118 # locking (write-protection) of individual blocks.
9120 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9121 # No options implement this inferface
9122 # This value cannot be modified here.
9124 # Current value: 0 0
9126 # The following properties are affected by this value
9127 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9128 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9131 # Hardware cannot support direct access to FLASH memory
9132 # This option will be asserted by devices which cannot support
9133 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9134 # devices). In these cases, the driver must provide an appropriate
9135 # hardware access function.
9137 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9139 # No user value, uncomment the following line to provide one.
9141 # The inferred value should not be edited directly.
9143 # value_source inferred
9145 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9146 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9149 # The following properties are affected by this value
9150 # option CYGPRI_REDBOOT_ZLIB_FLASH
9151 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9152 # component CYGHWR_DEVS_FLASH_MMC
9153 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9154 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9155 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9156 # option CYGHWR_DEVS_FLASH_MMC_SD
9157 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9158 # option CYGHWR_DEVS_FLASH_MXC_NAND
9159 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9162 # Display status messages during flash operations
9163 # Selecting this option will cause the drivers to print status
9164 # messages as various flash operations are undertaken.
9166 cdl_option CYGSEM_IO_FLASH_CHATTER {
9168 # No user value, uncomment the following line to provide one.
9170 # value_source default
9174 # Verify data programmed to flash
9175 # Selecting this option will cause verification of data
9176 # programmed to flash.
9178 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9180 # No user value, uncomment the following line to provide one.
9182 # The inferred value should not be edited directly.
9184 # value_source inferred
9187 # The following properties are affected by this value
9188 # option CYGSEM_IO_FLASH_READ_INDIRECT
9189 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9192 # Platform has flash soft DIP switch write-protect
9193 # Selecting this option will cause the state of a hardware jumper or
9194 # dipswitch to be read by software to determine whether the flash is
9195 # write-protected or not.
9197 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9199 # No user value, uncomment the following line to provide one.
9201 # value_source default
9205 # Instantiate in I/O block device API
9206 # Provides a block device accessible using the standard I/O
9207 # API ( cyg_io_read() etc. )
9209 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9210 # This option is not active
9211 # ActiveIf constraint: CYGPKG_IO
9212 # CYGPKG_IO (unknown) == 0
9216 # No user value, uncomment the following line to provide one.
9218 # value_source default
9223 # Name of flash device 1 block device
9225 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9226 # This option is not active
9227 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9228 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9231 # No user value, uncomment the following line to provide one.
9232 # user_value "\"/dev/flash1\""
9233 # value_source default
9234 # Default value: "\"/dev/flash1\""
9239 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9240 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9241 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9242 # This option is not active
9243 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9245 # This value cannot be modified here.
9248 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9249 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9252 # The following properties are affected by this value
9253 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9254 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9257 # Static configuration
9258 # This configures the flash device 1 block device
9259 # with static base and length
9261 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9262 # This option is not active
9263 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9266 # No user value, uncomment the following line to provide one.
9268 # value_source default
9273 # Start offset from flash base
9274 # This gives the offset from the base of flash which this
9275 # block device corresponds to.
9277 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9278 # This option is not active
9279 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9282 # No user value, uncomment the following line to provide one.
9283 # user_value 0x00100000
9284 # value_source default
9285 # Default value: 0x00100000
9289 # This gives the length of the region of flash given over
9290 # to this block device.
9292 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9293 # This option is not active
9294 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9297 # No user value, uncomment the following line to provide one.
9298 # user_value 0x00100000
9299 # value_source default
9300 # Default value: 0x00100000
9304 # Configuration from FIS
9305 # This configures the flash device 1 block device
9308 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9309 # This option is not active
9310 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9313 # No user value, uncomment the following line to provide one.
9315 # value_source default
9322 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9323 # This option is not active
9324 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9325 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9328 # No user value, uncomment the following line to provide one.
9329 # user_value "\"jffs2\""
9330 # value_source default
9331 # Default value: "\"jffs2\""
9337 # Flash device driver build options
9338 # Package specific build options including control over
9339 # compiler flags used only in building this package,
9340 # and details of which tests are built.
9342 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9343 # There is no associated value.
9347 # Additional compiler flags
9348 # This option modifies the set of compiler flags for
9349 # building the flash device drivers. These flags are used in addition
9350 # to the set of global flags.
9352 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9354 # No user value, uncomment the following line to provide one.
9356 # value_source default
9360 # Suppressed compiler flags
9361 # This option modifies the set of compiler flags for
9362 # building the flash device drivers. These flags are removed from
9363 # the set of global flags if present.
9365 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9367 # No user value, uncomment the following line to provide one.
9369 # value_source default
9373 # Flash device driver tests
9374 # This option specifies the set of tests for the flash device drivers.
9376 cdl_component CYGPKG_IO_FLASH_TESTS {
9377 # Calculated value: "tests/flash1"
9379 # Current_value: tests/flash1
9383 # Start offset from flash base
9384 # This gives the offset from the base of flash where tests
9385 # can be run. It is important to set this correctly, as an
9386 # incorrect value could allow the tests to write over critical
9387 # portions of the FLASH device and possibly render the target
9388 # board totally non-functional.
9390 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9392 # No user value, uncomment the following line to provide one.
9393 # user_value 0x00100000
9394 # value_source default
9395 # Default value: 0x00100000
9399 # This gives the length of the region of flash used for testing.
9401 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9403 # No user value, uncomment the following line to provide one.
9404 # user_value 0x00100000
9405 # value_source default
9406 # Default value: 0x00100000
9411 # Support FLASH memory on Freescale MXC platforms
9413 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9414 # Packages cannot be added or removed, nor can their version be changed,
9415 # simply by editing their value. Instead the appropriate configuration
9416 # should be used to perform these actions.
9418 # ActiveIf constraint: CYGPKG_IO_FLASH
9419 # CYGPKG_IO_FLASH == current
9422 # This value cannot be modified here.
9424 # Current value: 1 current
9428 # MXC platform MMC card support
9429 # When this option is enabled, it indicates MMC card is
9430 # supported on the MXC platforms
9432 cdl_component CYGHWR_DEVS_FLASH_MMC {
9434 # No user value, uncomment the following line to provide one.
9436 # value_source default
9438 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9439 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9442 # The following properties are affected by this value
9443 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9444 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9445 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9446 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9447 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9448 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9449 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9450 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9454 # MXC platform MMC card for newer SDHC controllers
9456 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9457 # This option is not active
9458 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9459 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9460 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9461 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9462 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9463 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9464 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9465 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
9469 # No user value, uncomment the following line to provide one.
9471 # value_source default
9473 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9474 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9478 # MXC platform MMC card for older MMC/SD controllers
9480 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9481 # This option is not active
9482 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9483 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9484 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9485 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9489 # No user value, uncomment the following line to provide one.
9491 # value_source default
9493 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9494 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9499 # MXC platform NOR flash memory support
9500 # When this option is enabled, it indicates NOR flash is
9501 # supported on the MXC platforms
9503 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9505 # No user value, uncomment the following line to provide one.
9507 # The inferred value should not be edited directly.
9509 # value_source inferred
9512 # The following properties are affected by this value
9513 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9514 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9515 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9516 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9517 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9518 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9519 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9520 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9521 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9522 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9525 # MXC platform NAND flash memory support
9526 # When this option is enabled, it indicates NAND flash is
9527 # supported on the MXC platforms
9529 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9531 # No user value, uncomment the following line to provide one.
9533 # The inferred value should not be edited directly.
9535 # value_source inferred
9537 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9538 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9541 # The following properties are affected by this value
9542 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9543 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9544 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9545 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9546 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9547 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9548 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9549 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9550 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9551 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9552 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9553 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9556 # i.MX platform SPI NOR flash memory support
9557 # When this option is enabled, it indicates SPI NOR flash is
9558 # supported on the i.MX platforms
9560 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9562 # No user value, uncomment the following line to provide one.
9564 # value_source default
9566 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9567 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9571 # MXC platform ATA support
9572 # When this option is enabled, it indicates ATA is
9573 # supported on the MXC platforms
9575 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9577 # No user value, uncomment the following line to provide one.
9579 # value_source default
9583 # Use a flash based Bad Block Table
9585 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9586 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9587 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9590 # There is no associated value.
9594 # When this option is enabled, the driver will search for a flash
9595 # based bad block table
9597 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9599 # No user value, uncomment the following line to provide one.
9601 # value_source default
9605 # header file defining the NAND BBT descriptor
9606 # defines the name of the header file that describes the BBT layout
9608 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9610 # No user value, uncomment the following line to provide one.
9612 # The inferred value should not be edited directly.
9613 inferred_value 1 <cyg/io/tx27_nand_bbt.h>
9614 # value_source inferred
9615 # Default value: 0 0
9618 # Number of blocks to reserve for BBT
9619 # Number of blocks to reserve for BBT
9621 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9623 # No user value, uncomment the following line to provide one.
9625 # value_source default
9630 # MXC platform multi flash memory support
9631 # When this option is enabled, it indicates multi flashes are
9632 # supported on the MXC platforms (like NAND and NOR)
9634 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9635 # This option is not active
9636 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9637 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9638 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9639 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9640 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9641 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9642 # CYGHWR_DEVS_FLASH_MMC == 0
9643 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9644 # CYGHWR_DEVS_FLASH_MMC == 0
9648 # No user value, uncomment the following line to provide one.
9650 # The inferred value should not be edited directly.
9652 # value_source inferred
9656 # MXC platform NAND flash reset workaround support
9657 # When this option is enabled, it indicates 0xFFFF is used for
9658 # the NAND reset command instead of 0xFF.
9660 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9661 # No options implement this inferface
9662 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9663 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9666 # This value cannot be modified here.
9673 # Dynamic memory allocation
9674 # doc: ref/memalloc.html
9675 # This package provides memory allocator infrastructure required for
9676 # dynamic memory allocators, including the ISO standard malloc
9677 # interface. It also contains some sample implementations.
9679 cdl_package CYGPKG_MEMALLOC {
9680 # Packages cannot be added or removed, nor can their version be changed,
9681 # simply by editing their value. Instead the appropriate configuration
9682 # should be used to perform these actions.
9684 # This value cannot be modified here.
9686 # Current value: 1 current
9688 # The following properties are affected by this value
9689 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9690 # Requires: CYGPKG_MEMALLOC
9694 # Memory allocator implementations
9695 # This component contains configuration options related to the
9696 # various memory allocators available.
9698 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9699 # There is no associated value.
9703 # Fixed block allocator
9704 # This component contains configuration options related to the
9705 # fixed block memory allocator.
9707 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9708 # There is no associated value.
9713 # With this option enabled, this allocator will be
9714 # made thread-safe. Additionally allocation functions
9715 # are made available that allow a thread to wait
9716 # until memory is available.
9718 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9719 # This option is not active
9720 # ActiveIf constraint: CYGPKG_KERNEL
9721 # CYGPKG_KERNEL (unknown) == 0
9725 # No user value, uncomment the following line to provide one.
9727 # value_source default
9732 # Simple variable block allocator
9733 # This component contains configuration options related to the
9734 # simple variable block memory allocator. This allocator is not
9735 # very fast, and in particular does not scale well with large
9736 # numbers of allocations. It is however very compact in terms of
9737 # code size and does not have very much overhead per allocation.
9739 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9740 # There is no associated value.
9745 # With this option enabled, this allocator will be
9746 # made thread-safe. Additionally allocation functions
9747 # are added that allow a thread to wait until memory
9748 # are made available that allow a thread to wait
9749 # until memory is available.
9751 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9752 # This option is not active
9753 # ActiveIf constraint: CYGPKG_KERNEL
9754 # CYGPKG_KERNEL (unknown) == 0
9758 # No user value, uncomment the following line to provide one.
9760 # value_source default
9765 # The variable-block memory allocator can perform coalescing
9766 # of memory whenever the application code releases memory back
9767 # to the pool. This coalescing reduces the possibility of
9768 # memory fragmentation problems, but involves extra code and
9771 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9773 # No user value, uncomment the following line to provide one.
9775 # value_source default
9778 # The following properties are affected by this value
9779 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9780 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9785 # This component contains configuration options related to the
9786 # port of Doug Lea's memory allocator, normally known as
9787 # dlmalloc. dlmalloc has a reputation for being both fast
9788 # and space-conserving, as well as resisting fragmentation well.
9789 # It is a common choice for a general purpose allocator and
9790 # has been used in both newlib and Linux glibc.
9792 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9793 # There is no associated value.
9798 # Doug Lea's malloc implementation has substantial amounts
9799 # of internal checking in order to verify the operation
9800 # and consistency of the allocator. However this imposes
9801 # substantial overhead on each operation. Therefore this
9802 # checking may be individually disabled.
9804 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9806 # No user value, uncomment the following line to provide one.
9808 # value_source default
9809 # Default value: 0 != CYGDBG_USE_ASSERTS
9810 # CYGDBG_USE_ASSERTS == 0
9812 # Requires: CYGDBG_USE_ASSERTS
9813 # CYGDBG_USE_ASSERTS == 0
9818 # With this option enabled, this allocator will be
9819 # made thread-safe. Additionally allocation functions
9820 # are made available that allow a thread to wait
9821 # until memory is available.
9823 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9824 # This option is not active
9825 # ActiveIf constraint: CYGPKG_KERNEL
9826 # CYGPKG_KERNEL (unknown) == 0
9830 # No user value, uncomment the following line to provide one.
9832 # value_source default
9834 # Requires: CYGPKG_KERNEL
9835 # CYGPKG_KERNEL (unknown) == 0
9839 # Support more than one instance
9840 # Having this option disabled allows important
9841 # implementation structures to be declared as a single
9842 # static instance, allowing faster access. However this
9843 # would fail if there is more than one instance of
9844 # the dlmalloc allocator class. Therefore this option can
9845 # be enabled if multiple instances are required. Note: as
9846 # a special case, if this allocator is used as the
9847 # implementation of malloc, and it can be determined there
9848 # is more than one malloc pool, then this option will be
9851 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9853 # No user value, uncomment the following line to provide one.
9855 # value_source default
9859 # Use system memmove() and memset()
9860 # This may be used to control whether memset() and memmove()
9861 # are used within the implementation. The alternative is
9862 # to use some macro equivalents, which some people report
9863 # are faster in some circumstances.
9865 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9867 # No user value, uncomment the following line to provide one.
9869 # value_source default
9870 # Default value: 0 != CYGPKG_ISOINFRA
9871 # CYGPKG_ISOINFRA == current
9873 # Requires: CYGPKG_ISOINFRA
9874 # CYGPKG_ISOINFRA == current
9878 # Minimum alignment of allocated blocks
9879 # This option controls the minimum alignment that the
9880 # allocated memory blocks are aligned on, specified as
9881 # 2^N. Note that using large mininum alignments can lead
9882 # to excessive memory wastage.
9884 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9886 # No user value, uncomment the following line to provide one.
9888 # value_source default
9890 # Legal values: 3 to 10
9894 # Variable block allocator with separate metadata
9895 # This component contains configuration options related to the
9896 # variable block memory allocator with separate metadata.
9898 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9899 # There is no associated value.
9904 # With this option enabled, this allocator will be
9905 # made thread-safe. Additionally allocation functions
9906 # are made available that allow a thread to wait
9907 # until memory is available.
9909 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9910 # This option is not active
9911 # ActiveIf constraint: CYGPKG_KERNEL
9912 # CYGPKG_KERNEL (unknown) == 0
9916 # No user value, uncomment the following line to provide one.
9918 # value_source default
9924 # Kernel C API support for memory allocation
9925 # This option must be enabled to provide the extensions required
9926 # to support integration into the kernel C API.
9928 cdl_option CYGFUN_MEMALLOC_KAPI {
9929 # This option is not active
9930 # ActiveIf constraint: CYGPKG_KERNEL
9931 # CYGPKG_KERNEL (unknown) == 0
9935 # No user value, uncomment the following line to provide one.
9937 # value_source default
9938 # Default value: CYGFUN_KERNEL_API_C
9939 # CYGFUN_KERNEL_API_C (unknown) == 0
9943 # malloc(0) returns NULL
9944 # This option controls the behavior of malloc(0) ( or calloc with
9945 # either argument 0 ). It is permitted by the standard to return
9946 # either a NULL pointer or a unique pointer. Enabling this option
9947 # forces a NULL pointer to be returned.
9949 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9951 # No user value, uncomment the following line to provide one.
9953 # value_source default
9957 # Breakpoint site when running out of memory
9958 # Whenever the system runs out of memory, it invokes this function
9959 # before either going to sleep waiting for memory to become
9960 # available or returning failure.
9962 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9964 # No user value, uncomment the following line to provide one.
9966 # value_source default
9970 # malloc() and supporting allocators
9971 # This component enables support for dynamic memory
9972 # allocation as supplied by the functions malloc(),
9973 # free(), calloc() and realloc(). As these
9974 # functions are often used, but can have quite an
9975 # overhead, disabling them here can ensure they
9976 # cannot even be used accidentally when static
9977 # allocation is preferred. Within this component are
9978 # various allocators that can be selected for use
9979 # as the underlying implementation of the dynamic
9980 # allocation functions.
9982 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9983 # ActiveIf constraint: CYGPKG_ISOINFRA
9984 # CYGPKG_ISOINFRA == current
9988 # No user value, uncomment the following line to provide one.
9990 # value_source default
9995 # Use external heap definition
9996 # This option allows other components in the
9997 # system to override the default system
9998 # provision of heap memory pools. This should
9999 # be set to a header which provides the equivalent
10000 # definitions to <pkgconf/heaps.hxx>.
10002 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10004 # No user value, uncomment the following line to provide one.
10006 # value_source default
10007 # Default value: 0 0
10010 # Use external implementation of joining multiple heaps
10011 # The default implementation of joining multiple heaps
10012 # is fine for the case where there are multiple disjoint
10013 # memory regions of the same type. However, in a system
10014 # there might be e.g. a small amount of internal SRAM and
10015 # a large amount of external DRAM. The SRAM is faster and
10016 # the DRAM is slower. An application can implement some
10017 # heuristic to choose which pool to allocate from. This
10018 # heuristic can be highly application specific.
10020 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10022 # No user value, uncomment the following line to provide one.
10024 # value_source default
10025 # Default value: 0 0
10028 # malloc() allocator implementations
10030 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10031 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10032 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10033 # This value cannot be modified here.
10036 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10037 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10040 # The following properties are affected by this value
10041 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10042 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10045 # malloc() implementation instantiation data
10046 # Memory allocator implementations that are capable of being
10047 # used underneath malloc() must be instantiated. The code
10048 # to do this is set in this option. It is only intended to
10049 # be set by the implementation, not the user.
10051 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10053 # No user value, uncomment the following line to provide one.
10054 # user_value <cyg/memalloc/dlmalloc.hxx>
10055 # value_source default
10056 # Default value: <cyg/memalloc/dlmalloc.hxx>
10058 # The following properties are affected by this value
10059 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10060 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10061 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10062 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10065 # Simple variable block implementation
10066 # This causes malloc() to use the simple
10067 # variable block allocator.
10069 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10071 # No user value, uncomment the following line to provide one.
10073 # value_source default
10075 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10076 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10078 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10079 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10083 # Doug Lea's malloc implementation
10084 # This causes malloc() to use a version of Doug Lea's
10085 # malloc (dlmalloc) as the underlying implementation.
10087 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10089 # No user value, uncomment the following line to provide one.
10091 # value_source default
10093 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10094 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10099 # Size of the fallback dynamic memory pool in bytes
10100 # If *no* heaps are configured in your memory layout,
10101 # dynamic memory allocation by
10102 # malloc() and calloc() must be from a fixed-size,
10103 # contiguous memory pool (note here that it is the
10104 # pool that is of a fixed size, but malloc() is still
10105 # able to allocate variable sized chunks of memory
10106 # from it). This option is the size
10107 # of that pool, in bytes. Note that not all of
10108 # this is available for programs to
10109 # use - some is needed for internal information
10110 # about memory regions, and some may be lost to
10111 # ensure that memory allocation only returns
10112 # memory aligned on word (or double word)
10113 # boundaries - a very common architecture
10116 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10118 # No user value, uncomment the following line to provide one.
10120 # value_source default
10121 # Default value: 16384
10122 # Legal values: 32 to 0x7fffffff
10125 # Common memory allocator package build options
10126 # Package specific build options including control over
10127 # compiler flags used only in building this package,
10128 # and details of which tests are built.
10130 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10131 # There is no associated value.
10135 # Additional compiler flags
10136 # This option modifies the set of compiler flags for
10137 # building this package. These flags are used in addition
10138 # to the set of global flags.
10140 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10142 # No user value, uncomment the following line to provide one.
10143 # user_value "-fno-rtti -Woverloaded-virtual"
10144 # value_source default
10145 # Default value: "-fno-rtti -Woverloaded-virtual"
10148 # Suppressed compiler flags
10149 # This option modifies the set of compiler flags for
10150 # building this package. These flags are removed from
10151 # the set of global flags if present.
10153 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10155 # No user value, uncomment the following line to provide one.
10156 # user_value -Wno-pointer-sign
10157 # value_source default
10158 # Default value: -Wno-pointer-sign
10162 # This option specifies the set of tests for this package.
10164 cdl_option CYGPKG_MEMALLOC_TESTS {
10165 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10167 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10172 # Common error code support
10173 # This package contains the common list of error and
10174 # status codes. It is held centrally to allow
10175 # packages to interchange error codes and status
10176 # codes in a common way, rather than each package
10177 # having its own conventions for error/status
10178 # reporting. The error codes are modelled on the
10179 # POSIX style naming e.g. EINVAL etc. This package
10180 # also provides the standard strerror() function to
10181 # convert error codes to textual representation, as
10182 # well as an implementation of the errno idiom.
10184 cdl_package CYGPKG_ERROR {
10185 # Packages cannot be added or removed, nor can their version be changed,
10186 # simply by editing their value. Instead the appropriate configuration
10187 # should be used to perform these actions.
10189 # This value cannot be modified here.
10191 # Current value: 1 current
10192 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10193 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10199 # This package controls the behaviour of the
10200 # errno variable (or more strictly, expression)
10203 cdl_component CYGPKG_ERROR_ERRNO {
10205 # No user value, uncomment the following line to provide one.
10207 # value_source default
10209 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10210 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10216 # This option controls whether the standard error
10217 # code reporting variable errno is a per-thread
10218 # variable, rather than global.
10220 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10222 # No user value, uncomment the following line to provide one.
10224 # The inferred value should not be edited directly.
10226 # value_source inferred
10228 # Requires: CYGVAR_KERNEL_THREADS_DATA
10229 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10234 # Trace verbosity level for debugging the errno
10235 # retrieval mechanism in errno.cxx. Increase this
10236 # value to get additional trace output.
10238 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10240 # No user value, uncomment the following line to provide one.
10242 # value_source default
10244 # Legal values: 0 to 1
10248 # strerror function
10249 # This package controls the presence and behaviour of the
10250 # strerror() function from <string.h>
10252 cdl_option CYGPKG_ERROR_STRERROR {
10254 # No user value, uncomment the following line to provide one.
10256 # value_source default
10258 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10259 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10263 # Error package build options
10264 # Package specific build options including control over
10265 # compiler flags used only in building this package,
10266 # and details of which tests are built.
10268 cdl_component CYGPKG_ERROR_OPTIONS {
10269 # There is no associated value.
10273 # Additional compiler flags
10274 # This option modifies the set of compiler flags for
10275 # building the error package. These flags are used in addition
10276 # to the set of global flags.
10278 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10280 # No user value, uncomment the following line to provide one.
10282 # value_source default
10283 # Default value: ""
10286 # Suppressed compiler flags
10287 # This option modifies the set of compiler flags for
10288 # building the error package. These flags are removed from
10289 # the set of global flags if present.
10291 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10293 # No user value, uncomment the following line to provide one.
10295 # value_source default
10296 # Default value: ""