1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX37 current ;
34 package -hardware CYGPKG_HAL_ARM_TX37KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX37 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-1136jfs-linux-gnu
79 # value_source default
80 # Default value: arm-1136jfs-linux-gnu
83 # Global compiler flags
84 # This option controls the global compiler flags which are used to
85 # compile all packages by default. Individual packages may define
86 # options which override these global flags.
88 cdl_option CYGBLD_GLOBAL_CFLAGS {
90 # No user value, uncomment the following line to provide one.
91 # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # value_source default
93 # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
95 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
98 # The following properties are affected by this value
99 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
100 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
101 # option CYGBLD_INFRA_CFLAGS_PIPE
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
105 # Global linker flags
106 # This option controls the global linker flags. Individual
107 # packages may define options which override these global flags.
109 cdl_option CYGBLD_GLOBAL_LDFLAGS {
111 # No user value, uncomment the following line to provide one.
112 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
113 # value_source default
114 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
117 # Build common GDB stub ROM image
118 # Unless a target board has specific requirements to the
119 # stub implementation, it can use a simple common stub.
120 # This option, which gets enabled by platform HALs as
121 # appropriate, controls the building of the common stub.
123 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
125 # No user value, uncomment the following line to provide one.
127 # value_source default
129 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
130 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
135 # ISO C library string functions
137 # This package provides string functions specified by the
138 # ISO C standard - ISO/IEC 9899:1990.
140 cdl_package CYGPKG_LIBC_STRING {
141 # Packages cannot be added or removed, nor can their version be changed,
142 # simply by editing their value. Instead the appropriate configuration
143 # should be used to perform these actions.
145 # This value cannot be modified here.
147 # Current value: 1 current
148 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
149 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
151 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
152 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
154 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
155 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
157 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
158 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
160 # Requires: CYGPKG_ISOINFRA
161 # CYGPKG_ISOINFRA == current
166 # Inline versions of <string.h> functions
167 # This option chooses whether some of the
168 # particularly simple string functions from
169 # <string.h> are available as inline
170 # functions. This may improve performance, and as
171 # the functions are small, may even improve code
174 cdl_option CYGIMP_LIBC_STRING_INLINES {
176 # No user value, uncomment the following line to provide one.
178 # value_source default
182 # Optimize string functions for code size
183 # This option tries to reduce string function
184 # code size at the expense of execution speed. The
185 # same effect can be produced if the code is
186 # compiled with the -Os option to the compiler.
188 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
190 # No user value, uncomment the following line to provide one.
192 # value_source default
196 # Provide BSD compatibility functions
197 # Enabling this option causes various compatibility functions
198 # commonly found in the BSD UNIX operating system to be included.
199 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
200 # strncasecmp, index, rindex and swab.
202 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
204 # No user value, uncomment the following line to provide one.
206 # The inferred value should not be edited directly.
208 # value_source inferred
210 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
211 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
213 # Requires: CYGINT_ISO_CTYPE
214 # CYGINT_ISO_CTYPE == 1
219 # These options control the behaviour of the
220 # strtok() and strtok_r() string tokenization
223 cdl_component CYGPKG_LIBC_STRING_STRTOK {
224 # There is no associated value.
228 # Per-thread strtok()
229 # This option controls whether the string function
230 # strtok() has its state recorded on a per-thread
231 # basis rather than global. If this option is
232 # disabled, some per-thread space can be saved.
233 # Note there is also a POSIX-standard strtok_r()
234 # function to achieve a similar effect with user
235 # support. Enabling this option will use one slot
236 # of kernel per-thread data. You should ensure you
237 # have enough slots configured for all your
240 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
241 # This option is not active
242 # ActiveIf constraint: CYGPKG_KERNEL
243 # CYGPKG_KERNEL (unknown) == 0
247 # No user value, uncomment the following line to provide one.
249 # value_source default
250 # Default value: CYGVAR_KERNEL_THREADS_DATA
251 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
253 # Requires: CYGVAR_KERNEL_THREADS_DATA
254 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
259 # Trace verbosity level for debugging the <string.h>
260 # functions strtok() and strtok_r(). Increase this
261 # value to get additional trace output.
263 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
265 # No user value, uncomment the following line to provide one.
267 # value_source default
269 # Legal values: 0 to 1
274 # This option indicates whether strdup() is to be supported.
276 cdl_option CYGFUN_LIBC_STRING_STRDUP {
277 # ActiveIf constraint: CYGINT_ISO_MALLOC
278 # CYGINT_ISO_MALLOC == 1
281 # Calculated value: 1
286 # C library string functions build options
287 # Package specific build options including control over
288 # compiler flags used only in building this package,
289 # and details of which tests are built.
291 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
292 # There is no associated value.
296 # Additional compiler flags
297 # This option modifies the set of compiler flags for
298 # building the C library. These flags are used in addition
299 # to the set of global flags.
301 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
303 # No user value, uncomment the following line to provide one.
304 # user_value "-fno-rtti -Woverloaded-virtual"
305 # value_source default
306 # Default value: "-fno-rtti -Woverloaded-virtual"
309 # Suppressed compiler flags
310 # This option modifies the set of compiler flags for
311 # building the C library. These flags are removed from
312 # the set of global flags if present.
314 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
316 # No user value, uncomment the following line to provide one.
317 # user_value -Wno-pointer-sign
318 # value_source default
319 # Default value: -Wno-pointer-sign
322 # C library string function tests
323 # This option specifies the set of tests for the C library
326 cdl_option CYGPKG_LIBC_STRING_TESTS {
327 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
329 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
334 # Common ethernet support
335 # doc: ref/io-eth-drv-generic.html
336 # Platform independent ethernet drivers
338 cdl_package CYGPKG_IO_ETH_DRIVERS {
339 # Packages cannot be added or removed, nor can their version be changed,
340 # simply by editing their value. Instead the appropriate configuration
341 # should be used to perform these actions.
343 # This value cannot be modified here.
345 # Current value: 1 current
347 # The following properties are affected by this value
348 # component CYGPKG_REDBOOT_NETWORKING
349 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
350 # package CYGPKG_DEVS_ETH_ARM_TX37
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_FEC
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_PHY
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
361 cdl_interface CYGHWR_NET_DRIVERS {
362 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
363 # This value cannot be modified here.
367 # The following properties are affected by this value
368 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
369 # ActiveIf: CYGHWR_NET_DRIVERS > 1
370 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
374 # Driver supports multicast addressing
375 # This interface defines whether or not a driver can handle
376 # requests for multicast addressing.
378 cdl_interface CYGINT_IO_ETH_MULTICAST {
379 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
380 # This value cannot be modified here.
384 # The following properties are affected by this value
387 # Support printing driver debug information
388 # Selecting this option will include code to allow the driver to
389 # print lots of information on diagnostic output such as full
392 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
394 # No user value, uncomment the following line to provide one.
396 # value_source default
401 # Driver debug output verbosity
402 # The value of this option indicates the default verbosity
403 # level of debugging output. 0 means no debugging output
404 # is made by default. Higher values indicate higher verbosity.
405 # The verbosity level may also be changed at run time by
406 # changing the variable cyg_io_eth_net_debug.
408 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
410 # No user value, uncomment the following line to provide one.
412 # value_source default
417 # Size of scatter-gather I/O lists
418 # A scatter-gather list is used to pass requests to/from
419 # the physical device driver. This list can typically be
420 # small, as the data is normally already packed into reasonable
423 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
425 # No user value, uncomment the following line to provide one.
427 # value_source default
431 # Support for standard eCos TCP/IP stack.
433 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
434 # This option is not active
435 # ActiveIf constraint: CYGPKG_NET
436 # CYGPKG_NET (unknown) == 0
440 # No user value, uncomment the following line to provide one.
442 # value_source default
444 # Requires: CYGINT_ISO_STRING_STRFUNCS
445 # CYGINT_ISO_STRING_STRFUNCS == 1
450 # Warn when there are no more mbufs
451 # Warnings about running out of mbufs are printed to the
452 # diagnostic output channel via diag_printf() if this option
453 # is enabled. Mbufs are the network stack's basic dynamic
454 # memory objects that hold all packets in transit; running
455 # out is bad for performance but not fatal, not a crash.
456 # You might want to turn off the warnings to preserve realtime
457 # properties of the system even in extremis.
459 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
460 # This option is not active
461 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
464 # No user value, uncomment the following line to provide one.
466 # value_source default
470 # Simulate network failures for testing
471 # This package contains a suite of simulated failure modes
472 # for the ethernet device layer, including dropping and/or
473 # corrupting received packets, dropping packets queued for
474 # transmission, and simulating a complete network break.
475 # It requires the kernel as a source of time information.
477 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
478 # This option is not active
479 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
482 # No user value, uncomment the following line to provide one.
484 # value_source default
489 # Drop incoming packets (percentage)
491 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
492 # This option is not active
493 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
494 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
497 # No user value, uncomment the following line to provide one.
499 # value_source default
500 # Default value: 1 10
501 # Legal values: 10 50 80
504 # Corrupt incoming packets (percentage)
506 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
507 # This option is not active
508 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
509 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
512 # No user value, uncomment the following line to provide one.
514 # value_source default
515 # Default value: 1 10
516 # Legal values: 10 50 80
519 # Drop outgoing packets (percentage)
521 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
522 # This option is not active
523 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
524 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
527 # No user value, uncomment the following line to provide one.
529 # value_source default
530 # Default value: 1 10
531 # Legal values: 10 50 80
534 # Simulate a line cut from time to time
535 # This option causes the system to drop all packets for a
536 # short random period (10s of seconds), and then act
537 # normally for up to 4 times that long. This simulates your
538 # sysadmin fiddling with plugs in the network switch
541 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
542 # This option is not active
543 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
544 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
547 # No user value, uncomment the following line to provide one.
549 # value_source default
555 # Support for stand-alone network stack.
557 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
558 # ActiveIf constraint: !CYGPKG_NET
559 # CYGPKG_NET (unknown) == 0
563 # No user value, uncomment the following line to provide one.
565 # value_source default
567 # Requires: CYGINT_ISO_STRING_MEMFUNCS
568 # CYGINT_ISO_STRING_MEMFUNCS == 1
573 # Pass packets to an alternate stack
574 # Define this to allow packets seen by this layer to be
575 # passed on to the previous logical layer, i.e. when
576 # stand-alone processing replaces system (eCos) processing.
578 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
580 # No user value, uncomment the following line to provide one.
582 # value_source default
583 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
584 # CYGPKG_REDBOOT_NETWORKING == 1
588 # Number of [network] buffers
589 # This option is used to allocate space to buffer incoming network
590 # packets. These buffers are used to hold data until they can be
591 # logically processed by higher layers.
593 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
595 # No user value, uncomment the following line to provide one.
597 # value_source default
599 # Legal values: 2 to 32
602 # Show driver warnings
603 # Selecting this option will allows the stand-alone ethernet driver
604 # to display warnings on the system console when incoming network
605 # packets are being discarded due to lack of buffer space.
607 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
608 # ActiveIf constraint: CYGPKG_REDBOOT
609 # CYGPKG_REDBOOT == current
613 # No user value, uncomment the following line to provide one.
615 # value_source default
620 # Support for lwIP network stack.
622 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
623 # This option is not active
624 # ActiveIf constraint: CYGPKG_NET_LWIP
625 # CYGPKG_NET_LWIP (unknown) == 0
629 # No user value, uncomment the following line to provide one.
631 # value_source default
633 # Requires: !CYGPKG_NET
634 # CYGPKG_NET (unknown) == 0
638 # Interrupt support required
639 # This interface is used to indicate to the low
640 # level device drivers that interrupt driven operation
641 # is required by higher layers.
643 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
644 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
645 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
646 # This value cannot be modified here.
650 # The following properties are affected by this value
653 # Common ethernet support build options
655 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
656 # There is no associated value.
660 # Additional compiler flags
661 # This option modifies the set of compiler flags for
662 # building the common ethernet support package. These flags are used in addition
663 # to the set of global flags.
665 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
667 # No user value, uncomment the following line to provide one.
668 # user_value "-D_KERNEL -D__ECOS"
669 # value_source default
670 # Default value: "-D_KERNEL -D__ECOS"
674 # Ethernet driver for Ka-Ro electronics TX37 processor module
676 cdl_package CYGPKG_DEVS_ETH_ARM_TX37 {
677 # Packages cannot be added or removed, nor can their version be changed,
678 # simply by editing their value. Instead the appropriate configuration
679 # should be used to perform these actions.
681 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
682 # CYGPKG_IO_ETH_DRIVERS == current
685 # This value cannot be modified here.
687 # Current value: 1 current
691 # FEC ethernet driver required
693 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
694 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
695 # This value cannot be modified here.
699 # The following properties are affected by this value
700 # package CYGPKG_DEVS_ETH_FEC
701 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
704 # Ka-Ro TX37 ethernet port driver
705 # This option includes the ethernet device driver for the
708 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
710 # No user value, uncomment the following line to provide one.
712 # value_source default
714 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
715 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
717 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
718 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
723 # Device name for the ETH0 ethernet driver
724 # This option sets the name of the ethernet device.
726 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
728 # No user value, uncomment the following line to provide one.
729 # user_value "\"eth0\""
730 # value_source default
731 # Default value: "\"eth0\""
734 # OUI part of MAC address
735 # This option sets OUI part (manufacturer ID) of the MAC address
738 cdl_option CYGDAT_DEVS_ETH_ARM_TX37KARO_OUI {
739 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
740 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
744 # No user value, uncomment the following line to provide one.
745 # user_value "{ 0x00, 0x0c, 0xc6 }"
746 # value_source default
747 # Default value: "{ 0x00, 0x0c, 0xc6 }"
752 # Driver for fast ethernet controller.
753 # Driver for fast ethernet controller.
755 cdl_package CYGPKG_DEVS_ETH_FEC {
756 # Packages cannot be added or removed, nor can their version be changed,
757 # simply by editing their value. Instead the appropriate configuration
758 # should be used to perform these actions.
760 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
761 # CYGPKG_IO_ETH_DRIVERS == current
763 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
764 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
767 # This value cannot be modified here.
769 # Current value: 1 current
773 # MXC FEC ethernet driver build options
775 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
776 # There is no associated value.
780 # Additional compiler flags
781 # This option modifies the set of compiler flags for
782 # building the Cirrus Logic ethernet driver package.
783 # These flags are used in addition
784 # to the set of global flags.
786 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
788 # No user value, uncomment the following line to provide one.
789 # user_value "-D_KERNEL -D__ECOS"
790 # value_source default
791 # Default value: "-D_KERNEL -D__ECOS"
795 # MXC FEC MII Gasket for RMII mode
796 # This option enables the use of the MII Gasket for
797 # RMII mode found in i.MX25 and i.MX53 processors.
799 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
800 # This option is not active
801 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
802 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
803 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
807 # No user value, uncomment the following line to provide one.
809 # value_source default
814 # Ethernet transceiver (PHY) support
815 # API for ethernet PHY devices
817 cdl_package CYGPKG_DEVS_ETH_PHY {
818 # Packages cannot be added or removed, nor can their version be changed,
819 # simply by editing their value. Instead the appropriate configuration
820 # should be used to perform these actions.
822 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
823 # CYGPKG_IO_ETH_DRIVERS == current
826 # This value cannot be modified here.
828 # Current value: 1 current
829 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
830 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
835 # Enable driver debugging
836 # Enables the diagnostic debug messages on the
839 cdl_option CYGDBG_DEVS_ETH_PHY {
841 # No user value, uncomment the following line to provide one.
843 # value_source default
847 # Time period (seconds) to wait for auto-negotiation
848 # The length of time to wait for auto-negotiation to complete
849 # before giving up and declaring the link dead/missing.
851 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
853 # No user value, uncomment the following line to provide one.
855 # value_source default
860 # Include support for National Semiconductor DP83847 DsPHYTER II
862 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
864 # No user value, uncomment the following line to provide one.
866 # value_source default
871 # Include support for AMD 79C874 NetPHY
873 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
875 # No user value, uncomment the following line to provide one.
877 # value_source default
882 # Include support for Intel LXT972xxx PHY
884 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
886 # No user value, uncomment the following line to provide one.
888 # value_source default
893 # Include support for ICS 1890 PHY
895 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
897 # No user value, uncomment the following line to provide one.
899 # value_source default
904 # Include support for ICS 1892 PHY
906 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
908 # No user value, uncomment the following line to provide one.
910 # value_source default
915 # Include support for ICS 1893 and 1893AF PHY
917 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
919 # No user value, uncomment the following line to provide one.
921 # value_source default
926 # Include support for the Davicom DM9161A PHY
928 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
930 # No user value, uncomment the following line to provide one.
932 # value_source default
937 # Include support for the Micrel KS8721 PHY
939 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
941 # No user value, uncomment the following line to provide one.
943 # value_source default
948 # Include support for SMSC LAN8700 NetPHY
950 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
952 # No user value, uncomment the following line to provide one.
954 # The inferred value should not be edited directly.
956 # value_source inferred
959 # The following properties are affected by this value
960 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
961 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
966 # ISO C library internationalization functions
968 # This package provides internationalization functions specified by the
969 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
970 # functionality and <ctype.h> functionality.
972 cdl_package CYGPKG_LIBC_I18N {
973 # Packages cannot be added or removed, nor can their version be changed,
974 # simply by editing their value. Instead the appropriate configuration
975 # should be used to perform these actions.
977 # This value cannot be modified here.
979 # Current value: 1 current
980 # Requires: CYGPKG_ISOINFRA
981 # CYGPKG_ISOINFRA == current
987 # These options determine which locales other than the "C" locale
988 # are supported and hence contribute to the size of the executable.
990 cdl_component CYGPKG_LIBC_I18N_LOCALES {
991 # There is no associated value.
995 # Support for multiple locales required
997 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
998 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
999 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1001 # This value cannot be modified here.
1003 # Current value: 0 0
1004 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1005 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1008 # The following properties are affected by this value
1011 # C-SJIS locale support
1012 # This option controls if the "C-SJIS" locale will be
1013 # supported by setlocale(). The locale is a hybrid locale
1014 # that is mostly the "C" locale with Japanese SJIS multibyte
1017 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1019 # No user value, uncomment the following line to provide one.
1021 # value_source default
1024 # The following properties are affected by this value
1025 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1026 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1031 # C-JIS locale support
1032 # This option controls if the "C-JIS" locale will be
1033 # supported by setlocale(). The locale is a hybrid locale
1034 # that is mostly the "C" locale with Japanese JIS multibyte
1037 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1039 # No user value, uncomment the following line to provide one.
1041 # value_source default
1044 # The following properties are affected by this value
1045 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1046 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1051 # C-EUCJP locale support
1052 # This option controls if the "C-EUCJP" locale will be
1053 # supported by setlocale(). The locale is a hybrid locale
1054 # that is mostly the "C" locale with Japanese EUCJP multibyte
1057 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1059 # No user value, uncomment the following line to provide one.
1061 # value_source default
1064 # The following properties are affected by this value
1065 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1066 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1067 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1068 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1072 # Newlib's ctype implementation
1073 # This option enables the implementation of the ctype functions
1074 # that comes with newlib. It is table driven and therefore
1075 # exhibits different performance characteristics. It also offers
1076 # a limited amount of binary compatibility
1077 # with newlib so that programs linked against newlib ctype/locale
1078 # do not need to be recompiled when linked with eCos.
1080 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1082 # No user value, uncomment the following line to provide one.
1084 # value_source default
1086 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1087 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1091 # Per-thread multibyte state
1092 # This option controls whether the multibyte character
1093 # handling functions mblen(), mbtowc(), and wctomb(),
1094 # have their state recorded on a per-thread
1095 # basis rather than global. If this option is
1096 # disabled, some per-thread space can be saved.
1097 # Enabling this option will use three slots
1098 # of kernel per-thread data. You should ensure you
1099 # have enough slots configured for all your
1102 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1103 # This option is not active
1104 # ActiveIf constraint: CYGPKG_KERNEL
1105 # CYGPKG_KERNEL (unknown) == 0
1109 # No user value, uncomment the following line to provide one.
1111 # value_source default
1112 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1113 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1115 # Requires: CYGVAR_KERNEL_THREADS_DATA
1116 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1120 # Size of locale name strings
1121 # This option controls the maximum size of
1122 # locale names and is used, among other things
1123 # to instantiate a static string used
1124 # as a return value from the
1125 # setlocale() function. When requesting the
1126 # current locale settings with LC_ALL, a string
1127 # must be constructed to contain this data, rather
1128 # than just returning a constant string. This
1129 # string data is stored in the static string.
1130 # This depends on the length of locale names,
1131 # hence this option. If just the C locale is
1132 # present, this option can be set as low as 2.
1134 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1136 # No user value, uncomment the following line to provide one.
1138 # value_source default
1139 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1140 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1141 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1142 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1144 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1145 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1146 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1147 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1150 # Inline versions of <ctype.h> functions
1151 # This option chooses whether the simple character
1152 # classification and conversion functions (e.g.
1153 # isupper(), isalpha(), toupper(), etc.)
1154 # from <ctype.h> are available as inline
1155 # functions. This may improve performance and as
1156 # the functions are small, may even improve code
1159 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1161 # No user value, uncomment the following line to provide one.
1163 # value_source default
1165 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1166 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1170 # C library i18n functions build options
1171 # Package specific build options including control over
1172 # compiler flags used only in building this package,
1173 # and details of which tests are built.
1175 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1176 # There is no associated value.
1180 # Additional compiler flags
1181 # This option modifies the set of compiler flags for
1182 # building the C library. These flags are used in addition
1183 # to the set of global flags.
1185 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1187 # No user value, uncomment the following line to provide one.
1188 # user_value "-fno-rtti -Woverloaded-virtual"
1189 # value_source default
1190 # Default value: "-fno-rtti -Woverloaded-virtual"
1193 # Suppressed compiler flags
1194 # This option modifies the set of compiler flags for
1195 # building the C library. These flags are removed from
1196 # the set of global flags if present.
1198 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1200 # No user value, uncomment the following line to provide one.
1201 # user_value -Wno-pointer-sign
1202 # value_source default
1203 # Default value: -Wno-pointer-sign
1206 # C library i18n function tests
1207 # This option specifies the set of tests for the C library
1210 cdl_option CYGPKG_LIBC_I18N_TESTS {
1211 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1213 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1218 # ISO C library general utility functions
1219 # doc: ref/libc.html
1220 # This package provides general utility functions in <stdlib.h>
1221 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1223 cdl_package CYGPKG_LIBC_STDLIB {
1224 # Packages cannot be added or removed, nor can their version be changed,
1225 # simply by editing their value. Instead the appropriate configuration
1226 # should be used to perform these actions.
1228 # This value cannot be modified here.
1230 # Current value: 1 current
1231 # Requires: CYGPKG_ISOINFRA
1232 # CYGPKG_ISOINFRA == current
1234 # Requires: CYGINT_ISO_CTYPE
1235 # CYGINT_ISO_CTYPE == 1
1237 # Requires: CYGINT_ISO_STRING_STRFUNCS
1238 # CYGINT_ISO_STRING_STRFUNCS == 1
1243 # Inline versions of <stdlib.h> functions
1244 # This option chooses whether some of the
1245 # particularly simple standard utility functions
1246 # from <stdlib.h> are available as inline
1247 # functions. This may improve performance, and as
1248 # the functions are small, may even improve code
1251 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1252 # There is no associated value.
1258 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1260 # No user value, uncomment the following line to provide one.
1262 # value_source default
1264 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1265 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1271 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1273 # No user value, uncomment the following line to provide one.
1275 # value_source default
1277 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1278 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1282 # atof() / atoi() / atol()
1284 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1286 # No user value, uncomment the following line to provide one.
1288 # value_source default
1290 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1291 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1296 # Random number generation
1297 # These options control the behaviour of the
1298 # functions rand(), srand() and rand_r()
1300 cdl_component CYGPKG_LIBC_RAND {
1301 # There is no associated value.
1305 # Per-thread random seed
1306 # doc: ref/libc-thread-safety.html
1307 # This option controls whether the pseudo-random
1308 # number generation functions rand() and srand()
1309 # have their state recorded on a per-thread
1310 # basis rather than global. If this option is
1311 # disabled, some per-thread space can be saved.
1312 # Note there is also a POSIX-standard rand_r()
1313 # function to achieve a similar effect with user
1314 # support. Enabling this option will use one slot
1315 # of kernel per-thread data. You should ensure you
1316 # have enough slots configured for all your
1319 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1321 # No user value, uncomment the following line to provide one.
1323 # value_source default
1325 # Requires: CYGVAR_KERNEL_THREADS_DATA
1326 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1330 # Random number seed
1331 # This selects the initial random number seed for
1332 # rand()'s pseudo-random number generator. For
1333 # strict ISO standard compliance, this should be 1,
1334 # as per section 7.10.2.2 of the standard.
1336 cdl_option CYGNUM_LIBC_RAND_SEED {
1338 # No user value, uncomment the following line to provide one.
1340 # value_source default
1342 # Legal values: 0 to 0x7fffffff
1346 # Trace verbosity level for debugging the rand(),
1347 # srand() and rand_r() functions. Increase this
1348 # value to get additional trace output.
1350 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1352 # No user value, uncomment the following line to provide one.
1354 # value_source default
1356 # Legal values: 0 to 1
1359 # Simplest implementation
1360 # This provides a very simple implementation of rand()
1361 # that does not perform well with randomness in the
1362 # lower significant bits. However it is exceptionally
1363 # fast. It uses the sample algorithm from the ISO C
1366 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1368 # No user value, uncomment the following line to provide one.
1370 # value_source default
1374 # Simple implementation #1
1375 # This provides a very simple implementation of rand()
1376 # based on the simplest implementation above. However
1377 # it does try to work around the lack of randomness
1378 # in the lower significant bits, at the expense of a
1381 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1388 # Knuth implementation #1
1389 # This implements a slightly more complex algorithm
1390 # published in Donald E. Knuth's Art of Computer
1391 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1392 # This produces better random numbers than the
1393 # simplest approach but is slower.
1395 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1404 # This option allows use of the utility function
1405 # strtod() (and consequently atof()) to convert
1406 # from string to double precision floating point
1407 # numbers. Disabling this option removes the
1408 # dependency on the math library package.
1410 cdl_option CYGFUN_LIBC_strtod {
1412 # No user value, uncomment the following line to provide one.
1414 # value_source default
1415 # Default value: 0 != CYGPKG_LIBM
1416 # CYGPKG_LIBM (unknown) == 0
1418 # Requires: CYGPKG_LIBM
1419 # CYGPKG_LIBM (unknown) == 0
1423 # Provides long long conversion functions
1424 # Enabling this option will provide support for the strtoll(),
1425 # strtoull() and atoll() conversion functions, which are
1426 # the long long variants of the standard versions of these
1427 # functions. Supporting this requires extra code and compile
1430 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1437 # bsearch() tracing level
1438 # Trace verbosity level for debugging the <stdlib.h>
1439 # binary search function bsearch(). Increase this
1440 # value to get additional trace output.
1442 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1444 # No user value, uncomment the following line to provide one.
1446 # value_source default
1448 # Legal values: 0 to 1
1451 # qsort() tracing level
1452 # Trace verbosity level for debugging the <stdlib.h>
1453 # quicksort function qsort(). Increase this value
1454 # to get additional trace output.
1456 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1458 # No user value, uncomment the following line to provide one.
1460 # value_source default
1462 # Legal values: 0 to 1
1465 # C library stdlib build options
1466 # Package specific build options including control over
1467 # compiler flags used only in building this package,
1468 # and details of which tests are built.
1470 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1471 # There is no associated value.
1475 # Additional compiler flags
1476 # This option modifies the set of compiler flags for
1477 # building this package. These flags are used in addition
1478 # to the set of global flags.
1480 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1482 # No user value, uncomment the following line to provide one.
1483 # user_value "-fno-rtti -Woverloaded-virtual"
1484 # value_source default
1485 # Default value: "-fno-rtti -Woverloaded-virtual"
1488 # Suppressed compiler flags
1489 # This option modifies the set of compiler flags for
1490 # building this package. These flags are removed from
1491 # the set of global flags if present.
1493 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1495 # No user value, uncomment the following line to provide one.
1496 # user_value -Wno-pointer-sign
1497 # value_source default
1498 # Default value: -Wno-pointer-sign
1501 # C library stdlib tests
1502 # This option specifies the set of tests for this package.
1504 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1505 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1507 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1514 # doc: ref/the-ecos-hardware-abstraction-layer.html
1515 # The eCos HAL package provide a porting layer for
1516 # higher-level parts of the system such as the kernel and the
1517 # C library. Each installation should have HAL packages for
1518 # one or more architectures, and for each architecture there
1519 # may be one or more supported platforms. It is necessary to
1520 # select one target architecture and one platform for that
1521 # architecture. There are also a number of configuration
1522 # options that are common to all HAL packages.
1524 cdl_package CYGPKG_HAL {
1525 # Packages cannot be added or removed, nor can their version be changed,
1526 # simply by editing their value. Instead the appropriate configuration
1527 # should be used to perform these actions.
1529 # This value cannot be modified here.
1531 # Current value: 1 current
1532 # Requires: CYGPKG_INFRA
1533 # CYGPKG_INFRA == current
1536 # The following properties are affected by this value
1540 # Platform-independent HAL options
1541 # A number of configuration options are common to most or all
1542 # HAL packages, for example options controlling how much state
1543 # should be saved during a context switch. The implementations
1544 # of these options will vary from architecture to architecture.
1546 cdl_component CYGPKG_HAL_COMMON {
1547 # There is no associated value.
1551 # Provide eCos kernel support
1552 # The HAL can be configured to either support the full eCos
1553 # kernel, or to support only very simple applications which do
1554 # not require a full kernel. If kernel support is not required
1555 # then some of the startup, exception, and interrupt handling
1556 # code can be eliminated.
1558 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1560 # No user value, uncomment the following line to provide one.
1562 # value_source default
1563 # Default value: CYGPKG_KERNEL
1564 # CYGPKG_KERNEL (unknown) == 0
1566 # Requires: CYGPKG_KERNEL
1567 # CYGPKG_KERNEL (unknown) == 0
1571 # HAL exception support
1572 # When a processor exception occurs, for example an attempt to
1573 # execute an illegal instruction or to perform a divide by
1574 # zero, this exception may be handled in a number of different
1575 # ways. If the target system has gdb support then typically
1576 # the exception will be handled by gdb code. Otherwise if the
1577 # HAL exception support is enabled then the HAL will invoke a
1578 # routine deliver_exception(). Typically this routine will be
1579 # provided by the eCos kernel, but it is possible for
1580 # application code to provide its own implementation. If the
1581 # HAL exception support is not enabled and a processor
1582 # exception occurs then the behaviour of the system is
1585 cdl_option CYGPKG_HAL_EXCEPTIONS {
1587 # No user value, uncomment the following line to provide one.
1589 # value_source default
1590 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1591 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1593 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1594 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1598 # Stop calling constructors early
1599 # This option supports environments where some constructors
1600 # must be run in the context of a thread rather than at
1601 # simple system startup time. A boolean flag named
1602 # cyg_hal_stop_constructors is set to 1 when constructors
1603 # should no longer be invoked. It is up to some other
1604 # package to deal with the rest of the constructors.
1605 # In the current version this is only possible with the
1608 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1610 # No user value, uncomment the following line to provide one.
1612 # value_source default
1614 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1615 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1619 # HAL uses the MMU and allows for CDL manipulation of it's use
1621 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1622 # No options implement this inferface
1623 # This value cannot be modified here.
1627 # The following properties are affected by this value
1628 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1629 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1632 # Install MMU tables.
1633 # This option controls whether this application installs
1634 # its own Memory Management Unit (MMU) tables, or relies on the
1635 # existing environment to run.
1637 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1638 # This option is not active
1639 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1640 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1644 # No user value, uncomment the following line to provide one.
1646 # value_source default
1647 # Default value: CYG_HAL_STARTUP != "RAM"
1648 # CYG_HAL_STARTUP == ROMRAM
1651 # The following properties are affected by this value
1652 # option CYGSEM_HAL_STATIC_MMU_TABLES
1653 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1656 # Use static MMU tables.
1657 # This option defines an environment where any Memory
1658 # Management Unit (MMU) tables are constant. Normally used by ROM
1659 # based environments, this provides a way to save RAM usage which
1660 # would otherwise be required for these tables.
1662 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1664 # No user value, uncomment the following line to provide one.
1666 # value_source default
1668 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1669 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1673 # Route diagnostic output to debug channel
1674 # If not inheriting the console setup from the ROM monitor,
1675 # it is possible to redirect diagnostic output to the debug
1676 # channel by enabling this option. Depending on the debugger
1677 # used it may also be necessary to select a mangler for the
1678 # output to be displayed by the debugger.
1680 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1681 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1682 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1684 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1685 # CYGPKG_HAL_ARM == current
1686 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1687 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1688 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1692 # No user value, uncomment the following line to provide one.
1694 # value_source default
1695 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1696 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1697 # CYG_HAL_STARTUP == ROMRAM
1700 # The following properties are affected by this value
1701 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1702 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1706 # Mangler used on diag output
1707 # It is sometimes necessary to mangle (encode) the
1708 # diag ASCII text output in order for it to show up at the
1709 # other end. In particular, GDB may silently ignore raw
1712 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1713 # This option is not active
1714 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1717 # No user value, uncomment the following line to provide one.
1719 # value_source default
1720 # Default value: GDB
1721 # Legal values: "GDB" "None"
1726 # HAL interrupt handling
1727 # A number of configuration options related to interrupt
1728 # handling are common to most or all HAL packages, even though
1729 # the implementations will vary from architecture to
1732 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1733 # There is no associated value.
1737 # Use separate stack for interrupts
1738 # When an interrupt occurs this interrupt can be handled either
1739 # on the current stack or on a separate stack maintained by the
1740 # HAL. Using a separate stack requires a small number of extra
1741 # instructions in the interrupt handling code, but it has the
1742 # advantage that it is no longer necessary to allow extra space
1743 # in every thread stack for the interrupt handlers. The amount
1744 # of extra space required depends on the interrupt handlers
1745 # that are being used.
1747 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1749 # No user value, uncomment the following line to provide one.
1751 # The inferred value should not be edited directly.
1753 # value_source inferred
1756 # The following properties are affected by this value
1757 # package CYGPKG_REDBOOT
1758 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1761 # Interrupt stack size
1762 # This configuration option specifies the stack size in bytes
1763 # for the interrupt stack. Typically this should be a multiple
1764 # of 16, but the exact requirements will vary from architecture
1765 # to architecture. The interrupt stack serves two separate
1766 # purposes. It is used as the stack during system
1767 # initialization. In addition, if the interrupt system is
1768 # configured to use a separate stack then all interrupts will
1769 # be processed on this stack. The exact memory requirements
1770 # will vary from application to application, and will depend
1771 # heavily on whether or not other interrupt-related options,
1772 # for example nested interrupts, are enabled. On most targets,
1773 # in a configuration with no kernel this stack will also be
1774 # the stack used to invoke the application, and must obviously
1775 # be appropriately large in that case.
1777 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1779 # No user value, uncomment the following line to provide one.
1781 # value_source default
1782 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1783 # CYGPKG_KERNEL (unknown) == 0
1785 # Legal values: 128 to 1048576
1788 # Allow nested interrupts
1789 # When an interrupt occurs the HAL interrupt handling code can
1790 # either leave interrupts disabled for the duration of the
1791 # interrupt handling code, or by doing some extra work it can
1792 # reenable interrupts before invoking the interrupt handler and
1793 # thus allow nested interrupts to happen. If all the interrupt
1794 # handlers being used are small and do not involve any loops
1795 # then it is usually better to disallow nested interrupts.
1796 # However if any of the interrupt handlers are more complicated
1797 # than nested interrupts will usually be required.
1799 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1801 # No user value, uncomment the following line to provide one.
1803 # value_source default
1807 # Save minimum context on interrupt
1808 # The HAL interrupt handling code can exploit the calling conventions
1809 # defined for a given architecture to reduce the amount of state
1810 # that has to be saved. Generally this improves performance and
1811 # reduces code size. However it can make source-level debugging
1814 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1816 # No user value, uncomment the following line to provide one.
1818 # The inferred value should not be edited directly.
1820 # value_source inferred
1823 # The following properties are affected by this value
1824 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1825 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1826 # component CYGBLD_BUILD_REDBOOT
1827 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1830 # Chain all interrupts together
1831 # Interrupts can be attached to vectors either singly, or be
1832 # chained together. The latter is necessary if there is no way
1833 # of discovering which device has interrupted without
1834 # inspecting the device itself. It can also reduce the amount
1835 # of RAM needed for interrupt decoding tables and code.
1837 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1839 # No user value, uncomment the following line to provide one.
1841 # value_source default
1845 # Ignore spurious [fleeting] interrupts
1846 # On some hardware, interrupt sources may not be de-bounced or
1847 # de-glitched. Rather than try to handle these interrupts (no
1848 # handling may be possible), this option allows the HAL to simply
1849 # ignore them. In most cases, if the interrupt is real it will
1850 # reoccur in a detectable form.
1852 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1854 # No user value, uncomment the following line to provide one.
1856 # value_source default
1861 # HAL context switch support
1862 # A number of configuration options related to thread contexts
1863 # are common to most or all HAL packages, even though the
1864 # implementations will vary from architecture to architecture.
1866 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1867 # There is no associated value.
1869 # The following properties are affected by this value
1873 # Use minimum thread context
1874 # The thread context switch code can exploit the calling
1875 # conventions defined for a given architecture to reduce the
1876 # amount of state that has to be saved during a context
1877 # switch. Generally this improves performance and reduces
1878 # code size. However it can make source-level debugging more
1881 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1883 # No user value, uncomment the following line to provide one.
1885 # The inferred value should not be edited directly.
1887 # value_source inferred
1890 # The following properties are affected by this value
1891 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1892 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1893 # component CYGBLD_BUILD_REDBOOT
1894 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1898 # Explicit control over cache behaviour
1899 # These options let the default behaviour of the caches
1900 # be easily configurable.
1902 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1903 # There is no associated value.
1907 # Enable DATA cache on startup
1908 # Enabling this option will cause the data cache to be enabled
1909 # as soon as practicable when eCos starts up. One would choose
1910 # to disable this if the data cache cannot safely be turned on,
1911 # such as a case where the cache(s) require additional platform
1914 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1916 # No user value, uncomment the following line to provide one.
1918 # value_source default
1923 # DATA cache mode on startup
1924 # This option controls the mode the cache will be set to
1925 # when enabled on startup.
1927 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1929 # No user value, uncomment the following line to provide one.
1930 # user_value COPYBACK
1931 # value_source default
1932 # Default value: COPYBACK
1933 # Legal values: "COPYBACK" "WRITETHRU"
1937 # Enable INSTRUCTION cache on startup
1938 # Enabling this option will cause the instruction cache to be enabled
1939 # as soon as practicable when eCos starts up. One would choose
1940 # to disable this if the instruction cache cannot safely be turned on,
1941 # such as a case where the cache(s) require additional platform
1944 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1946 # No user value, uncomment the following line to provide one.
1948 # value_source default
1953 # Source-level debugging support
1954 # If the source level debugger gdb is to be used for debugging
1955 # application code then it may be necessary to configure in support
1956 # for this in the HAL.
1958 cdl_component CYGPKG_HAL_DEBUG {
1959 # There is no associated value.
1963 # Support for GDB stubs
1964 # The HAL implements GDB stubs for the target.
1966 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1967 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
1968 # This value cannot be modified here.
1972 # The following properties are affected by this value
1973 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1974 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1975 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1976 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1979 # Include GDB stubs in HAL
1980 # This option causes a set of GDB stubs to be included into the
1981 # system. On some target systems the GDB support will be
1982 # provided by other means, for example by a ROM monitor. On
1983 # other targets, especially when building a ROM-booting system,
1984 # the necessary support has to go into the target library
1985 # itself. When GDB stubs are include in a configuration, HAL
1986 # serial drivers must also be included.
1988 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1989 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1990 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1994 # No user value, uncomment the following line to provide one.
1996 # The inferred value should not be edited directly.
1998 # value_source inferred
2000 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2001 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2003 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2004 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2006 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2007 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2009 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2010 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2011 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2014 # The following properties are affected by this value
2015 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2016 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2017 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2018 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2019 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2020 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2022 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2024 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2025 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2026 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2027 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2028 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2029 # option CYGPKG_HAL_GDB_FILEIO
2030 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2031 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2032 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2033 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2034 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2035 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2036 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2039 # Support for external break support in GDB stubs
2040 # The HAL implements external break (or asynchronous interrupt)
2041 # in the GDB stubs for the target.
2043 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2044 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
2045 # This value cannot be modified here.
2049 # The following properties are affected by this value
2050 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2051 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2054 # Include GDB external break support for stubs
2055 # This option causes the GDB stub to add a serial interrupt handler
2056 # which will listen for GDB break packets. This lets you stop the
2057 # target asynchronously when using GDB, usually by hitting Control+C
2058 # or pressing the STOP button. This option differs from
2059 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2060 # GDB stubs are present.
2062 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2063 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2064 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2068 # No user value, uncomment the following line to provide one.
2070 # value_source default
2071 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2072 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2074 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2075 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2078 # The following properties are affected by this value
2079 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2080 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2081 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2082 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2083 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2084 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2087 # Platform does not support CTRLC
2089 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2090 # No options implement this inferface
2091 # This value cannot be modified here.
2095 # The following properties are affected by this value
2096 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2097 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2100 # Include GDB external break support when no stubs
2101 # This option adds an interrupt handler for the GDB serial line
2102 # which will listen for GDB break packets. This lets you stop the
2103 # target asynchronously when using GDB, usually by hitting Control+C
2104 # or pressing the STOP button. This option differs from
2105 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2106 # stubs are NOT present.
2108 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2109 # This option is not active
2110 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2111 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2112 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2114 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2115 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2119 # No user value, uncomment the following line to provide one.
2121 # value_source default
2122 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2123 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2125 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2126 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2129 # The following properties are affected by this value
2130 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2131 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2132 # component CYGBLD_BUILD_REDBOOT
2133 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2136 # Include GDB multi-threading debug support
2137 # This option enables some extra HAL code which is needed
2138 # to support multi-threaded source level debugging.
2140 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2141 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2142 # CYGSEM_HAL_ROM_MONITOR == 1
2143 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2147 # No user value, uncomment the following line to provide one.
2149 # value_source default
2152 # The following properties are affected by this value
2153 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2154 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2155 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2156 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2159 # Number of times to retry sending a $O packet
2160 # This option controls the number of attempts that eCos programs
2161 # will make to send a $O packet to a host GDB process. If it is
2162 # set non-zero, then the target process will attempt to resend the
2163 # $O packet data up to this number of retries. Caution: use of
2164 # this option is not recommended as it can thoroughly confuse the
2167 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2169 # No user value, uncomment the following line to provide one.
2171 # value_source default
2175 # Timeout period for GDB packets
2176 # This option controls the time (in milliseconds) that eCos programs
2177 # will wait for a response when sending packets to a host GDB process.
2178 # If this time elapses, then the packet will be resent, up to some
2179 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2181 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2183 # No user value, uncomment the following line to provide one.
2185 # value_source default
2186 # Default value: 500
2189 # Location of CRC32 table
2190 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2191 # and placed in ROM, or generated at runtime in RAM. Depending on
2192 # your memory constraints, one of these options may be better.
2194 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2196 # No user value, uncomment the following line to provide one.
2198 # value_source default
2199 # Default value: RAM
2200 # Legal values: "ROM" "RAM"
2204 # ROM monitor support
2205 # Support for ROM monitors can be built in to your application.
2206 # It may also be relevant to build your application as a ROM monitor
2207 # itself. Such options are contained here if relevant for your chosen
2208 # platform. The options and ROM monitors available to choose are
2209 # platform-dependent.
2211 cdl_component CYGPKG_HAL_ROM_MONITOR {
2212 # There is no associated value.
2214 # The following properties are affected by this value
2218 # Target has virtual vector support
2220 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2221 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
2222 # This value cannot be modified here.
2226 # The following properties are affected by this value
2227 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2228 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2231 # Target supports baud rate control via vectors
2232 # Whether this target supports the __COMMCTL_GETBAUD
2233 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2235 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2236 # Implemented by CYGPKG_HAL_ARM_MX37, active, enabled
2237 # This value cannot be modified here.
2241 # The following properties are affected by this value
2242 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2243 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2246 # Enable use of virtual vector calling interface
2247 # Virtual vector support allows the HAL to let the ROM
2248 # monitor handle certain operations. The virtual vector table
2249 # defines a calling interface between applications running in
2250 # RAM and the ROM monitor.
2252 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2253 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2254 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2257 # Calculated value: 1
2261 # The following properties are affected by this value
2262 # component CYGBLD_BUILD_REDBOOT
2263 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2264 # package CYGPKG_DEVS_ETH_PHY
2265 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2269 # Inherit console settings from ROM monitor
2270 # When this option is set, the application will inherit
2271 # the console as set up by the ROM monitor. This means
2272 # that the application will use whatever channel and
2273 # mangling style was used by the ROM monitor when
2274 # the application was launched.
2276 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2277 # This option is not active
2278 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2279 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2283 # No user value, uncomment the following line to provide one.
2285 # value_source default
2286 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2287 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2290 # The following properties are affected by this value
2291 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2292 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2293 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2294 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2297 # Debug channel is configurable
2298 # This option is a configuration hint - it is enabled
2299 # when the HAL initialization code will make use
2300 # of the debug channel configuration option.
2302 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2303 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2304 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2308 # The following properties are affected by this value
2309 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2310 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2313 # Console channel is configurable
2314 # This option is a configuration hint - it is enabled
2315 # when the HAL initialization code will make use
2316 # of the console channel configuration option.
2318 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2319 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2320 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2321 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2325 # The following properties are affected by this value
2326 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2327 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2330 # Initialize whole of virtual vector table
2331 # This option will cause the whole of the virtual
2332 # vector table to be initialized with dummy values on
2333 # startup. When this option is enabled, all the
2334 # options below must also be enabled - or the
2335 # table would be empty when the application
2337 # On targets where older ROM monitors without
2338 # virtual vector support may still be in use, it is
2339 # necessary for RAM applictions to initialize the
2340 # table (since all HAL diagnostics and debug IO
2341 # happens via the table).
2343 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2345 # No user value, uncomment the following line to provide one.
2347 # value_source default
2348 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2349 # CYG_HAL_STARTUP == ROMRAM
2350 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2352 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2353 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2355 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2356 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2358 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2359 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2361 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2362 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2364 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2365 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2368 # The following properties are affected by this value
2369 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2370 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2371 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2372 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2373 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2374 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2375 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2376 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2377 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2378 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2379 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2380 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2381 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2382 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2385 # Claim virtual vector table entries by default
2386 # By default most virtual vectors will be claimed by
2387 # RAM startup configurations, meaning that the RAM
2388 # application will provide the services. The
2389 # exception is COMMS support (HAL
2390 # diagnostics/debugging IO) which is left in the
2391 # control of the ROM monitor.
2392 # The reasoning behind this is to get as much of the
2393 # code exercised during regular development so it
2394 # is known to be working the few times a new ROM
2395 # monitor or a ROM production configuration is used
2396 # - COMMS are excluded only by necessity in order to
2397 # avoid breaking an existing debugger connections
2398 # (there may be ways around this).
2399 # For production RAM configurations this option can
2400 # be switched off, causing the appliction to rely on
2401 # the ROM monitor for these services, thus
2402 # saving some space.
2403 # Individual vectors may also be left unclaimed,
2404 # controlled by the below options (meaning that the
2405 # associated service provided by the ROM monitor
2408 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2409 # This option is not active
2410 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2411 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2415 # No user value, uncomment the following line to provide one.
2417 # value_source default
2420 # The following properties are affected by this value
2421 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2422 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2423 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2424 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2426 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2427 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2428 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2431 # Claim reset virtual vectors
2432 # This option will cause the reset and kill_by_reset
2433 # virtual vectors to be claimed.
2435 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2437 # No user value, uncomment the following line to provide one.
2439 # value_source default
2440 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2441 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2442 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2445 # The following properties are affected by this value
2446 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2447 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2450 # Claim version virtual vectors
2451 # This option will cause the version
2452 # virtual vectors to be claimed.
2454 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2456 # No user value, uncomment the following line to provide one.
2458 # value_source default
2459 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2460 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2464 # Claim delay_us virtual vector
2465 # This option will cause the delay_us
2466 # virtual vector to be claimed.
2468 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2470 # No user value, uncomment the following line to provide one.
2472 # value_source default
2473 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2474 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2475 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2478 # The following properties are affected by this value
2479 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2480 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2483 # Claim cache virtual vectors
2484 # This option will cause the cache virtual vectors
2487 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2489 # No user value, uncomment the following line to provide one.
2491 # value_source default
2492 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2493 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2494 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2497 # The following properties are affected by this value
2498 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2499 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2502 # Claim data virtual vectors
2503 # This option will cause the data virtual vectors
2504 # to be claimed. At present there is only one, used
2505 # by the RedBoot ethernet driver to share diag output.
2507 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2509 # No user value, uncomment the following line to provide one.
2511 # value_source default
2512 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2513 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2514 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2517 # The following properties are affected by this value
2518 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2519 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2522 # Claim comms virtual vectors
2523 # This option will cause the communication tables
2524 # that are part of the virtual vectors mechanism to
2525 # be claimed. Note that doing this may cause an
2526 # existing ROM monitor communication connection to
2527 # be closed. For this reason, the option is disabled
2528 # per default for normal application
2531 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2533 # No user value, uncomment the following line to provide one.
2535 # value_source default
2536 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2537 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2538 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2541 # The following properties are affected by this value
2542 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2543 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2544 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2545 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2546 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2547 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2548 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2549 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2552 # Do diagnostic IO via virtual vector table
2553 # All HAL IO happens via the virtual vector table / comm
2554 # tables when those tables are supported by the HAL.
2555 # If so desired, the low-level IO functions can
2556 # still be provided by the RAM application by
2557 # enabling the CLAIM_COMMS option.
2559 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2560 # Calculated value: 1
2564 # The following properties are affected by this value
2565 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2566 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2567 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2568 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2572 # Behave as a ROM monitor
2573 # Enable this option if this program is to be used as a ROM monitor,
2574 # i.e. applications will be loaded into RAM on the TX37 module, and this
2575 # ROM monitor may process exceptions or interrupts generated from the
2576 # application. This enables features such as utilizing a separate
2577 # interrupt stack when exceptions are generated.
2579 cdl_option CYGSEM_HAL_ROM_MONITOR {
2581 # No user value, uncomment the following line to provide one.
2583 # The inferred value should not be edited directly.
2585 # value_source inferred
2587 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2588 # CYG_HAL_STARTUP == ROMRAM
2589 # CYG_HAL_STARTUP == ROMRAM
2592 # The following properties are affected by this value
2593 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2594 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2595 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2596 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2597 # option CYGPRI_REDBOOT_ROM_MONITOR
2598 # Requires: CYGSEM_HAL_ROM_MONITOR
2601 # Work with a ROM monitor
2602 # Support can be enabled for different varieties of ROM monitor.
2603 # This support changes various eCos semantics such as the encoding
2604 # of diagnostic output, or the overriding of hardware interrupt
2606 # Firstly there is "Generic" support which prevents the HAL
2607 # from overriding the hardware vectors that it does not use, to
2608 # instead allow an installed ROM monitor to handle them. This is
2609 # the most basic support which is likely to be common to most
2610 # implementations of ROM monitor.
2611 # "GDB_stubs" provides support when GDB stubs are included in
2612 # the ROM monitor or boot ROM.
2614 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2616 # No user value, uncomment the following line to provide one.
2618 # value_source default
2619 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2620 # CYG_HAL_STARTUP == ROMRAM
2622 # Legal values: "Generic" "GDB_stubs"
2623 # Requires: CYG_HAL_STARTUP == "RAM"
2624 # CYG_HAL_STARTUP == ROMRAM
2627 # The following properties are affected by this value
2628 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2629 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2630 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2631 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2632 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2633 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2634 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2635 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2639 # Platform defined I/O channels.
2640 # Platforms which provide additional I/O channels can implement
2641 # this interface, indicating that the function plf_if_init()
2642 # needs to be called.
2644 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2645 # No options implement this inferface
2646 # This value cannot be modified here.
2651 # Platform IDE I/O support.
2652 # Platforms which provide IDE controllers can implement
2653 # this interface, indicating that IDE I/O macros are
2656 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2657 # No options implement this inferface
2658 # This value cannot be modified here.
2662 # The following properties are affected by this value
2663 # component CYGSEM_REDBOOT_DISK_IDE
2664 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2667 # File I/O operations via GDB
2668 # This option enables support for various file I/O
2669 # operations using the GDB remote protocol to communicate
2670 # with GDB. The operations are then performed on the
2671 # debugging host by proxy. These operations are only
2672 # currently available by using a system call interface
2673 # to RedBoot. This may change in the future.
2675 cdl_option CYGPKG_HAL_GDB_FILEIO {
2676 # This option is not active
2677 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2678 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2682 # No user value, uncomment the following line to provide one.
2684 # value_source default
2686 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2687 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2691 # Build Compiler sanity checking tests
2692 # Enabling this option causes compiler tests to be built.
2694 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2696 # No user value, uncomment the following line to provide one.
2698 # value_source default
2701 # The following properties are affected by this value
2702 # component CYGPKG_HAL_TESTS
2703 # Calculated: "tests/context tests/basic"
2704 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2705 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2706 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2710 # This option specifies the set of tests for the common HAL.
2712 cdl_component CYGPKG_HAL_TESTS {
2713 # Calculated value: "tests/context tests/basic"
2714 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2715 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2716 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2717 # CYGINT_HAL_TESTS_NO_CACHES == 0
2718 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2719 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2721 # Current_value: tests/context tests/basic tests/cache tests/intr
2725 # Interface for cache presence
2726 # Some architectures and/or platforms do not have caches. By
2727 # implementing this interface, these can disable the various
2728 # cache-related tests.
2730 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2731 # No options implement this inferface
2732 # This value cannot be modified here.
2734 # Current value: 0 0
2736 # The following properties are affected by this value
2737 # component CYGPKG_HAL_TESTS
2738 # Calculated: "tests/context tests/basic"
2739 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2740 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2741 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2746 # The ARM architecture HAL package provides generic
2747 # support for this processor architecture. It is also
2748 # necessary to select a specific target platform HAL
2751 cdl_package CYGPKG_HAL_ARM {
2752 # Packages cannot be added or removed, nor can their version be changed,
2753 # simply by editing their value. Instead the appropriate configuration
2754 # should be used to perform these actions.
2756 # This value cannot be modified here.
2758 # Current value: 1 current
2760 # The following properties are affected by this value
2761 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2762 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2763 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2764 # ActiveIf: CYGPKG_HAL_ARM
2768 # The CPU architecture supports THUMB mode
2770 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2771 # No options implement this inferface
2772 # This value cannot be modified here.
2776 # The following properties are affected by this value
2777 # option CYGHWR_THUMB
2778 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2779 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2780 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2783 # Enable Thumb instruction set
2784 # Enable use of the Thumb instruction set.
2786 cdl_option CYGHWR_THUMB {
2787 # This option is not active
2788 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2789 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2793 # No user value, uncomment the following line to provide one.
2795 # value_source default
2798 # The following properties are affected by this value
2799 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2800 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2803 # Enable Thumb interworking compiler option
2804 # This option controls the use of -mthumb-interwork in the
2805 # compiler flags. It defaults enabled in Thumb or ROM monitor
2806 # configurations, but can be overridden for reduced memory
2807 # footprint where interworking is not a requirement.
2809 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2810 # This option is not active
2811 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2812 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2816 # No user value, uncomment the following line to provide one.
2818 # value_source default
2819 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2821 # CYGSEM_HAL_ROM_MONITOR == 1
2825 # The platform and architecture supports Big Endian operation
2827 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2828 # No options implement this inferface
2829 # This value cannot be modified here.
2833 # The following properties are affected by this value
2834 # option CYGHWR_HAL_ARM_BIGENDIAN
2835 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2838 # Use big-endian mode
2839 # Use the CPU in big-endian mode.
2841 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2842 # This option is not active
2843 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2844 # CYGINT_HAL_ARM_BIGENDIAN == 0
2848 # No user value, uncomment the following line to provide one.
2850 # value_source default
2854 # The platform uses a processor with an ARM7 core
2856 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2857 # No options implement this inferface
2858 # This value cannot be modified here.
2862 # The following properties are affected by this value
2863 # option CYGHWR_HAL_ARM_CPU_FAMILY
2864 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2865 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2866 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2867 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2869 # option CYGHWR_HAL_ARM_CPU_FAMILY
2870 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2871 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2872 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2873 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2877 # The platform uses a processor with an ARM9 core
2879 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2880 # Implemented by CYGPKG_HAL_ARM_MX37, active, enabled
2881 # This value cannot be modified here.
2885 # The following properties are affected by this value
2886 # option CYGHWR_HAL_ARM_CPU_FAMILY
2887 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2888 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2889 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2890 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2892 # option CYGHWR_HAL_ARM_CPU_FAMILY
2893 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2894 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2895 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2896 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2900 # The platform uses a processor with a StrongARM core
2902 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2903 # No options implement this inferface
2904 # This value cannot be modified here.
2908 # The following properties are affected by this value
2909 # option CYGHWR_HAL_ARM_CPU_FAMILY
2910 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2911 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2912 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2913 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2915 # option CYGHWR_HAL_ARM_CPU_FAMILY
2916 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2917 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2918 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2919 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2923 # The platform uses a processor with a XScale core
2925 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2926 # No options implement this inferface
2927 # This value cannot be modified here.
2931 # The following properties are affected by this value
2932 # option CYGHWR_HAL_ARM_CPU_FAMILY
2933 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2934 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2935 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2936 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2938 # option CYGHWR_HAL_ARM_CPU_FAMILY
2939 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2940 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2941 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2942 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2947 # It is possible to optimize code for different
2948 # ARM CPU families. This option selects which CPU to
2949 # optimize for on boards that support multiple CPU types.
2951 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2953 # No user value, uncomment the following line to provide one.
2955 # value_source default
2956 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2957 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2958 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2959 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2961 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2962 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2963 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2964 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2966 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2967 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2968 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2969 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2971 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2972 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2973 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2974 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2977 # Provide diagnostic dump for exceptions
2978 # Print messages about hardware exceptions, including
2979 # raw exception frame dump and register contents.
2981 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2983 # No user value, uncomment the following line to provide one.
2985 # value_source default
2987 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2988 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2992 # Process all exceptions with the eCos application
2993 # Normal RAM-based programs which do not include GDB stubs
2994 # defer processing of the illegal instruction exception to GDB.
2995 # Setting this options allows the program to explicitly handle
2996 # the illegal instruction exception itself. Note: this will
2997 # prevent the use of GDB to debug the application as breakpoints
2998 # will no longer work.
3000 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3002 # No user value, uncomment the following line to provide one.
3004 # value_source default
3008 # Support GDB thread operations via ICE/Multi-ICE
3009 # Allow GDB to get thread information via the ICE/Multi-ICE
3012 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3014 # No user value, uncomment the following line to provide one.
3016 # value_source default
3018 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3019 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3021 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3022 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3024 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3025 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3029 # Support for 'gprof' callbacks
3030 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3031 # to acquire the interrupt-context PC and SP, when this option is
3034 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3035 # This option is not active
3036 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3037 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3039 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3040 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3041 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3044 # Calculated value: 1
3049 # Accept exceptions and irq's occurring in user mode
3050 # For standalone Redboot based programs running in user mode.
3052 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3054 # No user value, uncomment the following line to provide one.
3056 # value_source default
3060 # Preserve svc spsr before returning to svc mode
3061 # This option secures exception and breakpoint processing
3062 # triggered during execution of application specific SWI
3065 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3067 # No user value, uncomment the following line to provide one.
3069 # value_source default
3075 cdl_option CYGBLD_LINKER_SCRIPT {
3076 # Calculated value: "src/arm.ld"
3078 # Current_value: src/arm.ld
3081 # Implementations of hal_arm_mem_real_region_top()
3083 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3084 # No options implement this inferface
3085 # This value cannot be modified here.
3090 # Freescale SoC architecture
3091 # This HAL variant package provides generic
3092 # support for the Freescale SoC. It is also
3093 # necessary to select a specific target platform HAL
3096 cdl_package CYGPKG_HAL_ARM_MX37 {
3097 # Packages cannot be added or removed, nor can their version be changed,
3098 # simply by editing their value. Instead the appropriate configuration
3099 # should be used to perform these actions.
3101 # This value cannot be modified here.
3103 # Current value: 1 current
3105 # The following properties are affected by this value
3109 # Processor clock rate
3110 # The processor can run at various frequencies.
3111 # These values are expressed in KHz. Note that there are
3112 # several steppings of the rate to run at different
3113 # maximum frequencies. Check the specs to make sure that your
3114 # particular processor can run at the rate you select here.
3116 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3117 # This option is not active
3118 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3119 # CYG_HAL_STARTUP == ROMRAM
3123 # No user value, uncomment the following line to provide one.
3125 # value_source default
3126 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3127 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3128 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3129 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3131 # Legal values: 150000 200000
3134 # Real-time clock constants
3136 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3137 # There is no associated value.
3141 # Real-time clock numerator
3143 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3144 # Calculated value: 1000000000
3146 # Current_value: 1000000000
3149 # Real-time clock denominator
3150 # This option selects the heartbeat rate for the real-time clock.
3151 # The rate is specified in ticks per second. Change this value
3152 # with caution - too high and your system will become saturated
3153 # just handling clock interrupts, too low and some operations
3154 # such as thread scheduling may become sluggish.
3156 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3158 # No user value, uncomment the following line to provide one.
3160 # value_source default
3161 # Default value: 100
3163 # The following properties are affected by this value
3164 # option CYGNUM_HAL_RTC_PERIOD
3165 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3168 # Real-time clock period
3170 cdl_option CYGNUM_HAL_RTC_PERIOD {
3171 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3172 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3174 # Current_value: 36864
3178 # UART1 available as diagnostic/debug channel
3179 # The chip has multiple serial channels which may be
3180 # used for different things on different platforms. This
3181 # interface allows a platform to indicate that the specified
3182 # serial port can be used as a diagnostic and/or debug channel.
3184 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3185 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
3186 # This value cannot be modified here.
3190 # The following properties are affected by this value
3193 # UART2 available as diagnostic/debug channel
3194 # The chip has multiple serial channels which may be
3195 # used for different things on different platforms. This
3196 # interface allows a platform to indicate that the specified
3197 # serial port can be used as a diagnostic and/or debug channel.
3199 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3200 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
3201 # This value cannot be modified here.
3205 # The following properties are affected by this value
3208 # UART3 available as diagnostic/debug channel
3209 # The chip has multiple serial channels which may be
3210 # used for different things on different platforms. This
3211 # interface allows a platform to indicate that the specified
3212 # serial port can be used as a diagnostic and/or debug channel.
3214 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3215 # No options implement this inferface
3216 # This value cannot be modified here.
3221 # UART4 available as diagnostic/debug channel
3222 # The chip has multiple serial channels which may be
3223 # used for different things on different platforms. This
3224 # interface allows a platform to indicate that the specified
3225 # serial port can be used as a diagnostic and/or debug channel.
3227 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3228 # No options implement this inferface
3229 # This value cannot be modified here.
3234 # UART5 available as diagnostic/debug channel
3235 # The chip has multiple serial channels which may be
3236 # used for different things on different platforms. This
3237 # interface allows a platform to indicate that the specified
3238 # serial port can be used as a diagnostic and/or debug channel.
3240 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3241 # No options implement this inferface
3242 # This value cannot be modified here.
3248 # This HAL platform package provides generic
3249 # support for the Ka-Ro electronics TX37 module.
3251 cdl_package CYGPKG_HAL_ARM_TX37KARO {
3252 # Packages cannot be added or removed, nor can their version be changed,
3253 # simply by editing their value. Instead the appropriate configuration
3254 # should be used to perform these actions.
3256 # This value cannot be modified here.
3258 # Current value: 1 current
3259 # Requires: CYGINT_ISO_CTYPE
3260 # CYGINT_ISO_CTYPE == 1
3262 # Requires: CYGBLD_BUILD_REDBOOT == 1
3263 # CYGBLD_BUILD_REDBOOT == 1
3269 # The only startup type allowed is ROMRAM, since this will allow
3270 # the program to exist in ROM, but be copied to RAM during startup
3271 # which is required to boot from NAND flash.
3273 cdl_component CYG_HAL_STARTUP {
3275 # No user value, uncomment the following line to provide one.
3277 # value_source default
3278 # Default value: ROMRAM
3279 # Legal values: "ROMRAM"
3281 # The following properties are affected by this value
3282 # option CYGSEM_HAL_ROM_MONITOR
3283 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3284 # option CYGSEM_HAL_ROM_MONITOR
3285 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3286 # option CYGSEM_HAL_USE_ROM_MONITOR
3287 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3288 # option CYGSEM_HAL_USE_ROM_MONITOR
3289 # Requires: CYG_HAL_STARTUP == "RAM"
3290 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3291 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3292 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3293 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3294 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3295 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3296 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3297 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3298 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3299 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3300 # option CYGPRI_REDBOOT_ROM_MONITOR
3301 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3302 # option CYGPRI_REDBOOT_ROM_MONITOR
3303 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3306 # Diagnostic serial port baud rate
3307 # This option selects the baud rate used for the console port.
3308 # Note: this should match the value chosen for the GDB port if the
3309 # console and GDB port are the same.
3311 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3313 # No user value, uncomment the following line to provide one.
3315 # value_source default
3316 # Default value: 115200
3317 # Legal values: 9600 19200 38400 57600 115200
3320 # GDB serial port baud rate
3321 # This option selects the baud rate used for the GDB port.
3322 # Note: this should match the value chosen for the console port if the
3323 # console and GDB port are the same.
3325 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3327 # No user value, uncomment the following line to provide one.
3329 # value_source default
3330 # Default value: 115200
3331 # Legal values: 9600 19200 38400 57600 115200
3334 # Number of communication channels on the TX37
3336 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3337 # Calculated value: 2
3341 # The following properties are affected by this value
3342 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3343 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3344 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3345 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3346 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3347 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3351 # The TX37 provides access to two serial ports. This option
3352 # chooses which port will be used to connect to a host
3355 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3356 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3357 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3361 # No user value, uncomment the following line to provide one.
3363 # value_source default
3365 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3366 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2
3369 # Default console channel.
3371 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3372 # Calculated value: 0
3375 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3376 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2
3378 # The following properties are affected by this value
3379 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3380 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3383 # Console serial port
3384 # The TX37 provides access to two serial ports. This option
3385 # chooses which port will be used for console output.
3387 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3388 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3389 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3393 # No user value, uncomment the following line to provide one.
3395 # value_source default
3396 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3397 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3399 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3400 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2
3403 # Ka-Ro electronics TX37 module build options
3404 # Package specific build options including control over
3405 # compiler flags used only in building this package,
3406 # and details of which tests are built.
3408 cdl_component CYGPKG_HAL_ARM_TX37_OPTIONS {
3409 # There is no associated value.
3410 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3411 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3417 # This option specifies the SDRAM size of the TX37 module.
3419 cdl_option CYGNUM_HAL_ARM_TX37_SDRAM_SIZE {
3421 # No user value, uncomment the following line to provide one.
3422 # user_value 0x08000000
3423 # value_source default
3424 # Default value: 0x08000000
3425 # Legal values: 0x08000000 0x04000000
3428 # Enable low level debugging with LED
3429 # This option enables low level debugging by blink codes
3430 # of the LED on STK5.
3432 cdl_option CYGOPT_HAL_ARM_TX37_DEBUG {
3434 # No user value, uncomment the following line to provide one.
3436 # value_source default
3437 # Default value: false
3438 # false (unknown) == 0
3442 # Additional compiler flags
3443 # This option modifies the set of compiler flags for
3444 # building the TX37 HAL. These flags are used in addition
3445 # to the set of global flags.
3447 cdl_option CYGPKG_HAL_ARM_TX37_CFLAGS_ADD {
3449 # No user value, uncomment the following line to provide one.
3451 # value_source default
3455 # Suppressed compiler flags
3456 # This option modifies the set of compiler flags for
3457 # building the TX37 HAL. These flags are removed from
3458 # the set of global flags if present.
3460 cdl_option CYGPKG_HAL_ARM_TX37_CFLAGS_REMOVE {
3462 # No user value, uncomment the following line to provide one.
3464 # value_source default
3471 cdl_component CYGHWR_MEMORY_LAYOUT {
3472 # Calculated value: "arm_tx37_romram"
3474 # Current_value: arm_tx37_romram
3478 # Memory layout linker script fragment
3480 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3481 # Calculated value: "<pkgconf/mlt_arm_tx37_romram.ldi>"
3483 # Current_value: <pkgconf/mlt_arm_tx37_romram.ldi>
3486 # Memory layout header file
3488 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3489 # Calculated value: "<pkgconf/mlt_arm_tx37_romram.h>"
3491 # Current_value: <pkgconf/mlt_arm_tx37_romram.h>
3500 # Common types and useful macros.
3501 # Tracing and assertion facilities.
3502 # Package startup options.
3504 cdl_package CYGPKG_INFRA {
3505 # Packages cannot be added or removed, nor can their version be changed,
3506 # simply by editing their value. Instead the appropriate configuration
3507 # should be used to perform these actions.
3509 # This value cannot be modified here.
3511 # Current value: 1 current
3513 # The following properties are affected by this value
3514 # package CYGPKG_HAL
3515 # Requires: CYGPKG_INFRA
3516 # component CYGBLD_BUILD_REDBOOT
3517 # Requires: CYGPKG_INFRA
3522 # The eCos source code contains a significant amount of
3523 # internal debugging support, in the form of assertions and
3525 # Assertions check at runtime that various conditions are as
3526 # expected; if not, execution is halted.
3527 # Tracing takes the form of text messages that are output
3528 # whenever certain events occur, or whenever functions are
3530 # The most important property of these checks and messages is
3531 # that they are not required for the program to run.
3532 # It is prudent to develop software with assertions enabled,
3533 # but disable them when making a product release, thus
3534 # removing the overhead of that checking.
3535 # It is possible to enable assertions and tracing
3537 # There are also options controlling the exact behaviour of
3538 # the assertion and tracing facilities, thus giving users
3539 # finer control over the code and data size requirements.
3541 cdl_component CYGPKG_INFRA_DEBUG {
3543 # No user value, uncomment the following line to provide one.
3545 # value_source default
3548 # The following properties are affected by this value
3549 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3550 # ActiveIf: CYGPKG_INFRA_DEBUG
3555 # If this option is defined, asserts in the code are tested.
3556 # Assert functions (CYG_ASSERT()) are defined in
3557 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3558 # If it is not defined, these result in no additional
3559 # object code and no checking of the asserted conditions.
3561 cdl_component CYGDBG_USE_ASSERTS {
3562 # This option is not active
3563 # The parent CYGPKG_INFRA_DEBUG is disabled
3566 # No user value, uncomment the following line to provide one.
3568 # value_source default
3570 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3571 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3574 # The following properties are affected by this value
3575 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3576 # Requires: CYGDBG_USE_ASSERTS
3577 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3578 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3583 # This option allows individual control of preconditions.
3584 # A precondition is one type of assert, which it is
3585 # useful to control separately from more general asserts.
3586 # The function is CYG_PRECONDITION(condition,msg).
3588 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3589 # This option is not active
3590 # The parent CYGDBG_USE_ASSERTS is not active
3593 # No user value, uncomment the following line to provide one.
3595 # value_source default
3600 # This option allows individual control of postconditions.
3601 # A postcondition is one type of assert, which it is
3602 # useful to control separately from more general asserts.
3603 # The function is CYG_POSTCONDITION(condition,msg).
3605 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3606 # This option is not active
3607 # The parent CYGDBG_USE_ASSERTS is not active
3610 # No user value, uncomment the following line to provide one.
3612 # value_source default
3617 # This option allows individual control of loop invariants.
3618 # A loop invariant is one type of assert, which it is
3619 # useful to control separately from more general asserts,
3620 # particularly since a loop invariant is typically evaluated
3621 # a great many times when used correctly.
3622 # The function is CYG_LOOP_INVARIANT(condition,msg).
3624 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3625 # This option is not active
3626 # The parent CYGDBG_USE_ASSERTS is not active
3629 # No user value, uncomment the following line to provide one.
3631 # value_source default
3636 # All assertions within eCos contain a text message
3637 # which should give some information about the condition
3639 # These text messages will end up being embedded in the
3640 # application image and hence there is a significant penalty
3641 # in terms of image size.
3642 # It is possible to suppress the use of these messages by
3643 # disabling this option.
3644 # This results in smaller code size, but there is less
3645 # human-readable information if an assertion actually gets
3648 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3649 # This option is not active
3650 # The parent CYGDBG_USE_ASSERTS is not active
3653 # No user value, uncomment the following line to provide one.
3655 # value_source default
3661 # If this option is defined, tracing operations
3662 # result in output or logging, depending on other options.
3663 # This may have adverse effects on performance, if the time
3664 # taken to output message overwhelms the available CPU
3665 # power or output bandwidth.
3666 # Trace functions (CYG_TRACE()) are defined in
3667 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3668 # If it is not defined, these result in no additional
3669 # object code and no trace information.
3671 cdl_component CYGDBG_USE_TRACING {
3672 # This option is not active
3673 # The parent CYGPKG_INFRA_DEBUG is disabled
3676 # No user value, uncomment the following line to provide one.
3678 # value_source default
3680 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3681 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3684 # The following properties are affected by this value
3685 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3686 # ActiveIf: CYGDBG_USE_TRACING
3687 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3688 # ActiveIf: CYGDBG_USE_TRACING
3689 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3690 # ActiveIf: CYGDBG_USE_TRACING
3691 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3692 # ActiveIf: CYGDBG_USE_TRACING
3693 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3694 # ActiveIf: CYGDBG_USE_TRACING
3698 # Trace function reports
3699 # This option allows individual control of
3700 # function entry/exit tracing, independent of
3701 # more general tracing output.
3702 # This may be useful to remove clutter from a
3705 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3706 # This option is not active
3707 # The parent CYGDBG_USE_TRACING is not active
3708 # The parent CYGDBG_USE_TRACING is disabled
3711 # No user value, uncomment the following line to provide one.
3713 # value_source default
3718 # All trace calls within eCos contain a text message
3719 # which should give some information about the circumstances.
3720 # These text messages will end up being embedded in the
3721 # application image and hence there is a significant penalty
3722 # in terms of image size.
3723 # It is possible to suppress the use of these messages by
3724 # disabling this option.
3725 # This results in smaller code size, but there is less
3726 # human-readable information available in the trace output,
3727 # possibly only filenames and line numbers.
3729 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3730 # This option is not active
3731 # The parent CYGDBG_USE_TRACING is not active
3732 # The parent CYGDBG_USE_TRACING is disabled
3735 # No user value, uncomment the following line to provide one.
3737 # value_source default
3742 # Trace output implementations
3744 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3745 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3746 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3747 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3748 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3749 # This option is not active
3750 # The parent CYGPKG_INFRA_DEBUG is disabled
3752 # This value cannot be modified here.
3756 # The following properties are affected by this value
3757 # component CYGDBG_USE_ASSERTS
3758 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3759 # component CYGDBG_USE_TRACING
3760 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3764 # A null output module which is useful when
3765 # debugging interactively; the output routines
3766 # can be breakpointed rather than have them actually
3767 # 'print' something.
3769 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3770 # This option is not active
3771 # The parent CYGPKG_INFRA_DEBUG is disabled
3774 # No user value, uncomment the following line to provide one.
3776 # value_source default
3781 # An output module which produces simple output
3782 # from tracing and assertion events.
3784 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3785 # This option is not active
3786 # The parent CYGPKG_INFRA_DEBUG is disabled
3789 # No user value, uncomment the following line to provide one.
3791 # value_source default
3796 # An output module which produces fancy output
3797 # from tracing and assertion events.
3799 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3800 # This option is not active
3801 # The parent CYGPKG_INFRA_DEBUG is disabled
3804 # No user value, uncomment the following line to provide one.
3806 # value_source default
3811 # An output module which buffers output
3812 # from tracing and assertion events. The stored
3813 # messages are output when an assert fires, or
3814 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3816 # Of course, there will only be stored messages
3817 # if tracing per se (CYGDBG_USE_TRACING)
3820 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3821 # This option is not active
3822 # The parent CYGPKG_INFRA_DEBUG is disabled
3825 # No user value, uncomment the following line to provide one.
3827 # value_source default
3833 # The size of the trace buffer. This counts the number
3834 # of trace records stored. When the buffer fills it
3835 # either wraps, stops recording, or generates output.
3837 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3838 # This option is not active
3839 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3840 # ActiveIf constraint: CYGDBG_USE_TRACING
3841 # CYGDBG_USE_TRACING == 0
3845 # No user value, uncomment the following line to provide one.
3847 # value_source default
3849 # Legal values: 5 to 65535
3852 # Wrap trace buffer when full
3853 # When the trace buffer has filled with records it
3854 # starts again at the beginning. Hence only the last
3855 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3858 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3859 # This option is not active
3860 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3861 # ActiveIf constraint: CYGDBG_USE_TRACING
3862 # CYGDBG_USE_TRACING == 0
3866 # No user value, uncomment the following line to provide one.
3868 # value_source default
3872 # Halt trace buffer when full
3873 # When the trace buffer has filled with records it
3874 # stops recording. Hence only the first
3875 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3878 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3879 # This option is not active
3880 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3881 # ActiveIf constraint: CYGDBG_USE_TRACING
3882 # CYGDBG_USE_TRACING == 0
3886 # No user value, uncomment the following line to provide one.
3888 # value_source default
3892 # Print trace buffer when full
3893 # When the trace buffer has filled with records it
3894 # prints the contents of the buffer. The buffer is then
3895 # emptied and the system continues.
3897 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3898 # This option is not active
3899 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3900 # ActiveIf constraint: CYGDBG_USE_TRACING
3901 # CYGDBG_USE_TRACING == 0
3905 # No user value, uncomment the following line to provide one.
3907 # value_source default
3911 # Print trace buffer on assert fail
3912 # When an assertion fails the trace buffer will be
3913 # printed to the default diagnostic device.
3915 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3916 # This option is not active
3917 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3918 # ActiveIf constraint: CYGDBG_USE_TRACING
3919 # CYGDBG_USE_TRACING == 0
3923 # No user value, uncomment the following line to provide one.
3925 # value_source default
3930 # Use function names
3931 # All trace and assert calls within eCos contain a
3932 # reference to the builtin macro '__PRETTY_FUNCTION__',
3933 # which evaluates to a string containing
3934 # the name of the current function.
3935 # This is useful when reading a trace log.
3936 # It is possible to suppress the use of the function name
3937 # by disabling this option.
3938 # This results in smaller code size, but there is less
3939 # human-readable information available in the trace output,
3940 # possibly only filenames and line numbers.
3942 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3943 # This option is not active
3944 # The parent CYGPKG_INFRA_DEBUG is disabled
3947 # No user value, uncomment the following line to provide one.
3949 # value_source default
3955 # Some packages require a startup routine to be called.
3956 # This can be carried out by application code, by supplying
3957 # a routine called cyg_package_start() which calls the
3958 # appropriate package startup routine(s).
3959 # Alternatively, this routine can be constructed automatically
3960 # and configured to call the startup routines of your choice.
3962 cdl_component CYGPKG_INFRA_STARTUP {
3963 # There is no associated value.
3967 # Start uITRON subsystem
3968 # Generate a call to initialize the
3969 # uITRON compatibility subsystem
3970 # within the system version of cyg_package_start().
3971 # This enables compatibility with uITRON.
3972 # You must configure uITRON with the correct tasks before
3973 # starting the uItron subsystem.
3974 # If this is disabled, and you want to use uITRON,
3975 # you must call cyg_uitron_start() from your own
3976 # cyg_package_start() or cyg_userstart().
3978 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
3979 # This option is not active
3980 # ActiveIf constraint: CYGPKG_UITRON
3981 # CYGPKG_UITRON (unknown) == 0
3985 # No user value, uncomment the following line to provide one.
3987 # value_source default
3989 # Requires: CYGPKG_UITRON
3990 # CYGPKG_UITRON (unknown) == 0
3995 # Smaller slower memcpy()
3996 # Enabling this option causes the implementation of
3997 # the standard memcpy() routine to reduce code
3998 # size at the expense of execution speed. This
3999 # option is automatically enabled with the use of
4000 # the -Os option to the compiler. Also note that
4001 # the compiler will try to use its own builtin
4002 # version of memcpy() if possible, ignoring the
4003 # implementation in this package, unless given
4004 # the -fno-builtin compiler option.
4006 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4008 # No user value, uncomment the following line to provide one.
4010 # value_source default
4014 # Smaller slower memset()
4015 # Enabling this option causes the implementation of
4016 # the standard memset() routine to reduce code
4017 # size at the expense of execution speed. This
4018 # option is automatically enabled with the use of
4019 # the -Os option to the compiler. Also note that
4020 # the compiler will try to use its own builtin
4021 # version of memset() if possible, ignoring the
4022 # implementation in this package, unless given
4023 # the -fno-builtin compiler option.
4025 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4027 # No user value, uncomment the following line to provide one.
4029 # value_source default
4033 # Provide empty C++ delete functions
4034 # To deal with virtual destructors, where the correct delete()
4035 # function must be called for the derived class in question, the
4036 # underlying delete is called when needed, from destructors. This
4037 # is regardless of whether the destructor is called by delete itself.
4038 # So there is a reference to delete() from all destructors. The
4039 # default builtin delete() attempts to call free() if there is
4040 # one defined. So, if you have destructors, and you have free(),
4041 # as in malloc() and free(), any destructor counts as a reference
4042 # to free(). So the dynamic memory allocation code is linked
4043 # in regardless of whether it gets explicitly called. This
4044 # increases code and data size needlessly.
4045 # To defeat this undesirable behaviour, we define empty versions
4046 # of delete and delete. But doing this prevents proper use
4047 # of dynamic memory in C++ programs via C++'s new and delete
4049 # Therefore, this option is provided
4050 # for explicitly disabling the provision of these empty functions,
4051 # so that new and delete can be used, if that is what is required.
4053 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4055 # No user value, uncomment the following line to provide one.
4057 # value_source default
4061 # Threshold for valid number of delete calls
4062 # Some users don't know about the empty delete function and then
4063 # wonder why their C++ classes are leaking memory. If
4064 # INFRA_DEBUG is enabled we keep a counter for the number of
4065 # times delete is called. If it goes above this threshold we throw
4066 # an assertion failure. This should point heavy users of
4067 # delete in the right direction without upsetting those who want
4068 # an empty delete function.
4070 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4071 # This option is not active
4072 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4073 # CYGPKG_INFRA_DEBUG == 0
4077 # No user value, uncomment the following line to provide one.
4079 # value_source default
4080 # Default value: 100
4083 # Provide dummy abort() function
4084 # This option controls the inclusion of a dummy abort() function.
4085 # Parts of the C and C++ compiler runtime systems contain references
4086 # to abort(), particulary in the C++ exception handling code. It is
4087 # not possible to eliminate these references, so this dummy function
4088 # in included to satisfy them. It is not expected that this function
4089 # will ever be called, so its current behaviour is to simply loop.
4091 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4093 # No user value, uncomment the following line to provide one.
4095 # value_source default
4096 # Default value: CYGINT_ISO_EXIT == 0
4097 # CYGINT_ISO_EXIT == 0
4099 # Requires: !CYGINT_ISO_EXIT
4100 # CYGINT_ISO_EXIT == 0
4104 # Reset platform at end of test case execution
4105 # If this option is set then test case programs will reset the platform
4106 # when they terminate, as opposed to the default which is to just hang
4109 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4111 # No user value, uncomment the following line to provide one.
4113 # value_source default
4117 # Provide dummy strlen() function
4118 # This option controls the inclusion of a dummy strlen() function.
4119 # Parts of the C and C++ compiler runtime systems contain references
4120 # to strlen(), particulary in the C++ exception handling code. It is
4121 # not possible to eliminate these references, so this dummy function
4122 # in included to satisfy them. While it is not expected that this function
4123 # will ever be called, it is functional but uses the simplest, smallest
4124 # algorithm. There is a faster version of strlen() in the C library.
4126 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4128 # No user value, uncomment the following line to provide one.
4130 # value_source default
4131 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4132 # CYGINT_ISO_STRING_STRFUNCS == 1
4134 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4135 # CYGINT_ISO_STRING_STRFUNCS == 1
4139 # Make all compiler warnings show as errors
4140 # Enabling this option will cause all compiler warnings to show
4141 # as errors and bring the library build to a halt. This is used
4142 # to ensure that the code base is warning free, and thus ensure
4143 # that newly introduced warnings stand out and get fixed before
4144 # they show up as weird run-time behavior.
4146 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4148 # No user value, uncomment the following line to provide one.
4150 # The inferred value should not be edited directly.
4152 # value_source inferred
4154 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4155 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4158 # The following properties are affected by this value
4159 # option CYGBLD_GLOBAL_CFLAGS
4160 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4163 # Make compiler and assembler communicate by pipe
4164 # Enabling this option will cause the compiler to feed the
4165 # assembly output the the assembler via a pipe instead of
4166 # via a temporary file. This normally reduces the build
4169 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4174 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4175 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4179 # Infra build options
4180 # Package specific build options including control over
4181 # compiler flags used only in building this package.
4183 cdl_component CYGPKG_INFRA_OPTIONS {
4184 # There is no associated value.
4188 # Additional compiler flags
4189 # This option modifies the set of compiler flags for
4190 # building the eCos infra package. These flags are used
4191 # in addition to the set of global flags.
4193 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4195 # No user value, uncomment the following line to provide one.
4196 # user_value "-fno-rtti -Woverloaded-virtual"
4197 # value_source default
4198 # Default value: "-fno-rtti -Woverloaded-virtual"
4201 # Suppressed compiler flags
4202 # This option modifies the set of compiler flags for
4203 # building the eCos infra package. These flags are removed from
4204 # the set of global flags if present.
4206 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4208 # No user value, uncomment the following line to provide one.
4209 # user_value -Wno-pointer-sign
4210 # value_source default
4211 # Default value: -Wno-pointer-sign
4214 # Suppressed linker flags
4215 # This option modifies the set of linker flags for
4216 # building the eCos infra package tests. These flags are removed from
4217 # the set of global flags if present.
4219 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4221 # No user value, uncomment the following line to provide one.
4222 # user_value -Wl,--gc-sections
4223 # value_source default
4224 # Default value: -Wl,--gc-sections
4227 # Additional linker flags
4228 # This option modifies the set of linker flags for
4229 # building the eCos infra package tests. These flags are added to
4230 # the set of global flags if present.
4232 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4234 # No user value, uncomment the following line to provide one.
4235 # user_value -Wl,--fatal-warnings
4236 # value_source default
4237 # Default value: -Wl,--fatal-warnings
4240 # Infra package tests
4242 cdl_component CYGPKG_INFRA_TESTS {
4243 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4245 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4249 # Number of times a test runs
4250 # This option controls the number of times tests will execute their
4251 # basic function. Not all tests will honor this setting, but those
4252 # that do will execute the test N times before terminating. A value
4253 # less than 0 indicates to run forever.
4255 cdl_option CYGNUM_TESTS_RUN_COUNT {
4257 # No user value, uncomment the following line to provide one.
4259 # value_source default
4266 # Redboot ROM monitor
4267 # doc: ref/redboot.html
4268 # This package supports the Redboot [stand-alone debug monitor]
4269 # using eCos as the underlying board support mechanism.
4271 cdl_package CYGPKG_REDBOOT {
4272 # Packages cannot be added or removed, nor can their version be changed,
4273 # simply by editing their value. Instead the appropriate configuration
4274 # should be used to perform these actions.
4276 # This value cannot be modified here.
4278 # Current value: 1 current
4279 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4280 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4283 # The following properties are affected by this value
4284 # component CYGPKG_REDBOOT_ARM_OPTIONS
4285 # ActiveIf: CYGPKG_REDBOOT
4286 # component CYGPKG_REDBOOT_HAL_OPTIONS
4287 # ActiveIf: CYGPKG_REDBOOT
4288 # component CYGPKG_REDBOOT_HAL_TX37_OPTIONS
4289 # ActiveIf: CYGPKG_REDBOOT
4290 # option CYGSEM_IO_ETH_DRIVERS_WARN
4291 # ActiveIf: CYGPKG_REDBOOT
4295 # Include support for ELF file format
4297 cdl_component CYGSEM_REDBOOT_ELF {
4299 # No user value, uncomment the following line to provide one.
4301 # value_source default
4306 # Use the virtual address in the ELF headers
4307 # The ELF headers contain both a virtual and a physical address
4308 # for where code/data should be loaded. By default the physical
4309 # address is used but sometimes it is necassary to use the
4310 # virtual address because of bugy toolchains
4312 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4314 # No user value, uncomment the following line to provide one.
4316 # value_source default
4321 # Methods of loading images using redboot
4323 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4324 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4325 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4326 # This value cannot be modified here.
4330 # The following properties are affected by this value
4331 # component CYGBLD_BUILD_REDBOOT
4332 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4335 # Build Redboot ROM ELF image
4336 # This option enables the building of the Redboot ELF image.
4337 # The image may require further relocation or symbol
4338 # stripping before being converted to a binary image.
4339 # This is handled by a rule in the target CDL.
4341 cdl_component CYGBLD_BUILD_REDBOOT {
4343 # No user value, uncomment the following line to provide one.
4345 # The inferred value should not be edited directly.
4347 # value_source inferred
4349 # Requires: CYGPKG_INFRA
4350 # CYGPKG_INFRA == current
4352 # Requires: CYGPKG_ISOINFRA
4353 # CYGPKG_ISOINFRA == current
4355 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4356 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4358 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4359 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4361 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4362 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4364 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4365 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4367 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4368 # CYGINT_ISO_STRING_MEMFUNCS == 1
4370 # Requires: CYGINT_ISO_STRING_STRFUNCS
4371 # CYGINT_ISO_STRING_STRFUNCS == 1
4373 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4374 # CYGINT_REDBOOT_LOAD_METHOD == 2
4377 # The following properties are affected by this value
4378 # package CYGPKG_HAL_ARM_TX37KARO
4379 # Requires: CYGBLD_BUILD_REDBOOT == 1
4380 # option CYGBLD_BUILD_REDBOOT_BIN
4381 # ActiveIf: CYGBLD_BUILD_REDBOOT
4385 # Include GDB support in RedBoot
4386 # RedBoot normally includes support for the GDB debugging
4387 # protocols. This option allows this to be disabled which
4388 # may yield a substantial savings in terms of code and memory
4391 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4392 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4393 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4397 # No user value, uncomment the following line to provide one.
4399 # The inferred value should not be edited directly.
4401 # value_source inferred
4403 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4404 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4406 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4407 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4411 # Threads debugging support
4412 # Enabling this option will include special code in the
4413 # GDB stubs to support debugging of threaded programs. In
4414 # the case of eCos programs, this support allows GDB to
4415 # have complete access to the eCos threads in the
4418 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4419 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4420 # CYG_HAL_STARTUP == ROMRAM
4424 # No user value, uncomment the following line to provide one.
4426 # value_source default
4428 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4429 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4433 # Customized version string
4434 # Use this option to define a customized version "string" for
4435 # RedBoot. Note: this value is only cosmetic, displayed by the
4436 # "version" command, but is useful for providing site specific
4437 # information about the RedBoot configuration.
4439 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4441 # No user value, uncomment the following line to provide one.
4443 # The inferred value should not be edited directly.
4444 inferred_value 1 "Ka-Ro 2009-06-10"
4445 # value_source inferred
4446 # Default value: 0 0
4449 # Enable command line editing
4450 # If this option is non-zero, RedBoot will remember the
4451 # last N command lines. These lines may be reused.
4452 # Enabling this history will also enable rudimentary
4453 # editting of the lines themselves.
4455 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4457 # No user value, uncomment the following line to provide one.
4459 # value_source default
4462 # The following properties are affected by this value
4463 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4464 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4465 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4466 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4469 # Enable command line editing using ANSI arrows, etc
4470 # If this option is enabled, RedBoot will accept standard ANSI key
4471 # sequences for cursor movement (along with the emacs style keys).
4473 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4474 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4475 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4479 # No user value, uncomment the following line to provide one.
4481 # value_source default
4485 # Enable history command and expansion
4486 # Enabling this option will allow RedBoot to provide a
4487 # history command to list previous commands. Also enables
4488 # history expansion via '!' character similar to bash
4491 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4493 # No user value, uncomment the following line to provide one.
4495 # value_source default
4497 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4498 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4502 # Number of unique RAM segments on platform
4503 # Change this option to be the number of memory segments which are
4504 # supported by the platform. If the value is greater than 1, then
4505 # a platform specific function must provide information about the
4506 # additional segments.
4508 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4510 # No user value, uncomment the following line to provide one.
4512 # value_source default
4516 # Include support gzip/zlib decompression
4518 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4519 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4520 # CYGPKG_COMPRESS_ZLIB == current
4524 # No user value, uncomment the following line to provide one.
4526 # value_source default
4529 # The following properties are affected by this value
4530 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4531 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4535 # Size of zlib decompression buffer
4536 # This is the size of the buffer filled with incoming data
4537 # during load before calls are made to the decompressor
4538 # function. For ethernet downloads this can be made bigger
4539 # (at the cost of memory), but for serial downloads on slow
4540 # processors it may be necessary to reduce the size to
4541 # avoid serial overruns. zlib appears to bail out if less
4542 # than five bytes are available initially so this is the
4545 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4547 # No user value, uncomment the following line to provide one.
4549 # value_source default
4551 # Legal values: 5 to 256
4554 # Support compression of Flash images
4555 # This CDL indicates whether flash images can
4556 # be decompressed from gzip/zlib format into RAM.
4558 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4559 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4560 # CYGPKG_REDBOOT_FLASH == 1
4562 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4563 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4564 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4567 # Calculated value: 1
4572 # Include GZIP uncompress command
4573 # Enable this option to include a 'gunzip' command
4574 # to uncompress GZIP compressed data.
4576 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4578 # No user value, uncomment the following line to provide one.
4580 # value_source default
4584 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4585 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4587 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4589 # No user value, uncomment the following line to provide one.
4591 # The inferred value should not be edited directly.
4593 # value_source inferred
4596 # The following properties are affected by this value
4597 # option CYGPRI_REDBOOT_ZLIB_FLASH
4598 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4602 # Include support for xyzModem downloads
4603 # doc: ref/download-command.html
4605 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4607 # No user value, uncomment the following line to provide one.
4609 # value_source default
4612 # The following properties are affected by this value
4613 # option CYGPKG_REDBOOT_CFLAGS_ADD
4614 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4617 # Additional compiler flags
4618 # This option modifies the set of compiler flags for
4619 # building the eCos infra package. These flags are used
4620 # in addition to the set of global flags.
4622 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4623 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4624 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4628 # No user value, uncomment the following line to provide one.
4629 # user_value -Wno-inline
4630 # value_source default
4631 # Default value: -Wno-inline
4634 # Allow the load-command write into Flash.
4635 # Write images direct to Flash via the load command.
4636 # We assume anything which is invalid RAM is flash, hence
4637 # the requires statement
4639 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4640 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4641 # CYGPKG_REDBOOT_FLASH == 1
4645 # No user value, uncomment the following line to provide one.
4647 # value_source default
4649 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4650 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4654 # Include MS Windows CE support
4655 # doc: ref/wince.html
4656 # This option enables MS Windows CE EShell support
4657 # and Windows CE .BIN images support
4659 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4666 # Include support for MXC USB downloads
4668 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4670 # No user value, uncomment the following line to provide one.
4672 # value_source default
4676 # Include support for i.MX USB OTG downloads
4678 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4680 # No user value, uncomment the following line to provide one.
4682 # value_source default
4686 # Include POSIX checksum command
4687 # doc: ref/cksum-command.html
4689 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4691 # No user value, uncomment the following line to provide one.
4693 # value_source default
4697 # Include memory fill command
4698 # doc: ref/mfill-command.html
4700 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4702 # No user value, uncomment the following line to provide one.
4704 # value_source default
4708 # Include memory compare command
4709 # doc: ref/mcmp-command.html
4711 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4713 # No user value, uncomment the following line to provide one.
4715 # value_source default
4719 # Include memory copy command
4720 # doc: ref/mcopy-command.html
4722 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4724 # No user value, uncomment the following line to provide one.
4726 # value_source default
4730 # Include memory dump command
4731 # doc: ref/dump-command.html
4733 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4735 # No user value, uncomment the following line to provide one.
4737 # value_source default
4741 # Include cache command
4742 # doc: ref/cache-command.html
4744 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4746 # No user value, uncomment the following line to provide one.
4748 # value_source default
4752 # Include exec command
4753 # doc: ref/exec-command.html
4755 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4757 # No user value, uncomment the following line to provide one.
4759 # value_source default
4762 # The following properties are affected by this value
4763 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4764 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4767 # Include I/O Memory commands 'iopeek' and 'iopoke'
4769 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4771 # No user value, uncomment the following line to provide one.
4773 # value_source default
4777 # Granularity of timer/ticks
4778 # This option controls the granularity of the timers.
4779 # Faster CPUs can afford higher granularity (lower values)
4780 # which should give higher network performance since the stack
4783 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4785 # No user value, uncomment the following line to provide one.
4787 # value_source default
4788 # Default value: 250
4789 # Legal values: 10 25 50 100 250 500 1000
4792 # Redboot Networking
4793 # This option includes networking support in RedBoot.
4795 cdl_component CYGPKG_REDBOOT_NETWORKING {
4796 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4797 # CYGPKG_IO_ETH_DRIVERS == current
4801 # No user value, uncomment the following line to provide one.
4803 # value_source default
4806 # The following properties are affected by this value
4807 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4808 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4812 # Print net debug information
4813 # This option is overriden by the configuration stored
4816 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4818 # No user value, uncomment the following line to provide one.
4820 # value_source default
4824 # Support TFTP for download
4825 # This option enables the use of the TFTP protocol for
4828 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4830 # No user value, uncomment the following line to provide one.
4832 # value_source default
4836 # Support HTTP for download
4837 # This option enables the use of the HTTP protocol for
4840 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4847 # Default IP address
4848 # This IP address is the default used by RedBoot if
4849 # a BOOTP/DHCP server does not respond. The numbers
4850 # should be separated by *commas*, and not dots. If
4851 # an IP address is configured into the Flash
4852 # configuration, that will be used in preference.
4854 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4856 # No user value, uncomment the following line to provide one.
4858 # value_source default
4859 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4860 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4865 # Do not try to use BOOTP
4866 # By default Redboot tries to use BOOTP to get an IP
4867 # address. If there's no BOOTP server on your network
4868 # use this option to avoid to wait until the
4869 # timeout. This option is overriden by the
4870 # configuration stored in flash.
4872 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4873 # This option is not active
4874 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4877 # No user value, uncomment the following line to provide one.
4879 # value_source default
4883 # Default bootp server
4884 # This IP address is the default server
4885 # address used by RedBoot if a BOOTP/DHCP
4886 # server does not respond. The numbers should
4887 # be separated by *commas*, and not dots. If
4888 # an IP address is configured into the Flash
4889 # configuration, that will be used in
4892 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4893 # This option is not active
4894 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4897 # No user value, uncomment the following line to provide one.
4899 # value_source default
4900 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4901 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4906 # Use DHCP to get IP information
4907 # Use DHCP protocol to obtain pertinent IP addresses, such
4908 # as the client, server, gateway, etc.
4910 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4912 # No user value, uncomment the following line to provide one.
4914 # value_source default
4917 # The following properties are affected by this value
4918 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4919 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4922 # Use a gateway for non-local IP traffic
4923 # Enabling this option will allow the RedBoot networking
4924 # stack to use a [single] gateway to reach a non-local
4925 # IP address. If disabled, RedBoot will only be able to
4926 # reach nodes on the same subnet.
4928 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4930 # No user value, uncomment the following line to provide one.
4932 # value_source default
4934 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4935 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4940 # Default gateway IP address
4941 # This IP address is the default used by RedBoot
4942 # if a BOOTP/DHCP server does not respond. The
4943 # numbers should be separated by *commas*, and
4944 # not dots. If an IP address is configured into
4945 # the Flash configuration, that will be used in
4948 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4950 # No user value, uncomment the following line to provide one.
4952 # value_source default
4953 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4954 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4958 # Default IP address mask
4959 # This IP address mask is the default used by
4960 # RedBoot if a BOOTP/DHCP server does not
4961 # respond. The numbers should be separated by
4962 # *commas*, and not dots. If an IP address is
4963 # configured into the Flash configuration, that
4964 # will be used in preference.
4966 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
4968 # No user value, uncomment the following line to provide one.
4970 # value_source default
4971 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
4972 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4977 # TCP port to listen for incoming connections
4978 # RedBoot will 'listen' on this port for incoming TCP
4979 # connections. This allows outside connections to be made
4980 # to the platform, either for GDB or RedBoot commands.
4982 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
4984 # No user value, uncomment the following line to provide one.
4986 # value_source default
4987 # Default value: 9000
4990 # Number of [network] packet buffers
4991 # RedBoot may need to buffer network data to support
4992 # various connections. This option allows control
4993 # over the number of such buffered packets, and in
4994 # turn, controls the amount of memory used by RedBoot
4995 # (which is not available to user applications).
4996 # Each packet buffer takes up about 1514 bytes.
4997 # Note: there is little need to make this larger than
5000 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5002 # No user value, uncomment the following line to provide one.
5004 # value_source default
5006 # Legal values: 3 to 8
5010 # When this option is enabled, RedBoot will be built with
5011 # support for DNS, allowing use of hostnames on the command
5014 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5015 # This option is not active
5016 # ActiveIf constraint: CYGPKG_NS_DNS
5017 # CYGPKG_NS_DNS (unknown) == 0
5021 # No user value, uncomment the following line to provide one.
5023 # value_source default
5025 # Requires: !CYGPKG_NS_DNS_BUILD
5026 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5032 # This option sets the IP of the default DNS. The IP can be
5033 # changed at runtime as well.
5035 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5036 # This option is not active
5037 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5038 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5039 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5043 # No user value, uncomment the following line to provide one.
5044 # user_value 0.0.0.0
5045 # value_source default
5046 # Default value: 0.0.0.0
5049 # Timeout in DNS lookup
5050 # This option sets the timeout used when looking up an
5051 # address via the DNS. Default is 10 seconds.
5053 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5054 # This option is not active
5055 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5058 # No user value, uncomment the following line to provide one.
5060 # value_source default
5064 # Support the use of a domain name
5065 # This option controls if Redboot supports domain
5066 # names when performing DNS lookups
5068 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5069 # This option is not active
5070 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5073 # No user value, uncomment the following line to provide one.
5075 # value_source default
5080 # Default DNS domain
5081 # This option sets the default DNS domain name.
5082 # This value will be overwritten by the value in
5083 # flash or a domain returned by DHCP
5085 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5086 # This option is not active
5087 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5088 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5091 # No user value, uncomment the following line to provide one.
5093 # value_source default
5094 # Default value: 0 0
5097 # Get DNS domain from Flash
5098 # This option enables getting the domain name
5099 # from the flash configuration. This can later be
5100 # overwritten by a value learnt from DHCP
5102 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5103 # This option is not active
5104 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5105 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5106 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5107 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5111 # No user value, uncomment the following line to provide one.
5113 # value_source default
5117 # Use DNS domain from DHCP
5118 # This option enables the use of the domain name
5121 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5122 # This option is not active
5123 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5124 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5127 # No user value, uncomment the following line to provide one.
5129 # value_source default
5133 # BOOTP/DHCP DNS domain buffer size
5134 # This options sets the size of the static
5135 # buffer used by BOOTP/DHCP to store the DNS
5136 # domain name. The domain name will not be
5137 # set if the buffer is too small to hold it.
5139 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5140 # This option is not active
5141 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5142 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5145 # No user value, uncomment the following line to provide one.
5147 # value_source default
5153 # Default network device driver
5154 # This is the name of the default network device to use.
5156 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5157 # This option is not active
5158 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5159 # CYGHWR_NET_DRIVERS == 1
5163 # No user value, uncomment the following line to provide one.
5165 # value_source default
5166 # Default value: "\"\""
5169 # Initialize only one net device
5170 # This option tells RedBoot to stop initializing network
5171 # devices when it finds the first device which is
5172 # successfully initialized. The default behavior causes
5173 # all network devices to be initialized.
5175 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5176 # This option is not active
5177 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5178 # CYGHWR_NET_DRIVERS == 1
5182 # No user value, uncomment the following line to provide one.
5184 # value_source default
5189 # Let RedBoot use any I/O channel for its console.
5190 # If this option is enabled then RedBoot will attempt to use all
5191 # defined serial I/O channels for its console device. Once input
5192 # arrives at one of these channels then the console will use only
5195 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5197 # No user value, uncomment the following line to provide one.
5199 # The inferred value should not be edited directly.
5201 # value_source inferred
5205 # Let RedBoot adjust the baud rate of the serial console.
5206 # If this option is enabled then RedBoot will support commands
5207 # to set and query the baud rate on the selected console.
5209 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5210 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5211 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5215 # No user value, uncomment the following line to provide one.
5217 # value_source default
5221 # Run a platform specific startup function.
5222 # If this option is enabled then RedBoot will execute a platform
5223 # specific startup function before entering into its command line
5224 # processing. This allows the platform to perform any special
5225 # setups before RedBoot actually starts running. Note: the entire
5226 # RedBoot environment will already be initialized at this point.
5228 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5230 # No user value, uncomment the following line to provide one.
5232 # value_source default
5236 # Run a platform specific ESA validation function.
5237 # If this option is enabled then RedBoot will execute a platform
5238 # specific function to validate an ethernet ESA. This would be
5239 # useful if the address must conform to standards set by the
5240 # hardware manufacturer, etc.
5242 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5244 # No user value, uncomment the following line to provide one.
5246 # The inferred value should not be edited directly.
5248 # value_source inferred
5251 # The following properties are affected by this value
5252 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5253 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5254 # option CYGDAT_DEVS_ETH_ARM_TX37KARO_OUI
5255 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5258 # Maximum command line length
5259 # This option allows control over how long the CLI command line
5260 # should be. This space will be allocated statically
5261 # rather than from RedBoot's stack.
5263 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5265 # No user value, uncomment the following line to provide one.
5267 # The inferred value should not be edited directly.
5269 # value_source inferred
5270 # Default value: 256
5273 # Command processing idle timeout (ms)
5274 # This option controls the timeout period before the
5275 # command processing is considered 'idle'. Making this
5276 # number smaller will cause idle processing to take place
5277 # more often, etc. The default value of 10ms is a reasonable
5278 # tradeoff between responsiveness and overhead.
5280 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5282 # No user value, uncomment the following line to provide one.
5284 # value_source default
5288 # Validate RAM addresses during load
5289 # This option controls whether or not RedBoot will make
5290 # sure that memory being used by the "load" command is
5291 # in fact in user RAM. Leaving the option enabled makes
5292 # for a safer environment, but this check may not be valid
5293 # on all platforms, thus the ability to disable it.
5294 # ** Disable this only with great care **
5296 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5298 # No user value, uncomment the following line to provide one.
5300 # value_source default
5303 # The following properties are affected by this value
5304 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5305 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5308 # Allow RedBoot to support FLASH programming
5309 # If this option is enabled then RedBoot will provide commands
5310 # to manage images in FLASH memory. These images can be loaded
5311 # into memory for execution or executed in place.
5313 cdl_component CYGPKG_REDBOOT_FLASH {
5314 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5315 # CYGHWR_IO_FLASH_DEVICE == 1
5319 # No user value, uncomment the following line to provide one.
5321 # value_source default
5324 # The following properties are affected by this value
5325 # option CYGPRI_REDBOOT_ZLIB_FLASH
5326 # ActiveIf: CYGPKG_REDBOOT_FLASH
5327 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5328 # ActiveIf: CYGPKG_REDBOOT_FLASH
5332 # Byte order used to store info in flash.
5333 # This option controls the byte ordering used to store
5334 # the FIS directory info and flash config info.
5336 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5338 # No user value, uncomment the following line to provide one.
5339 # user_value NATURAL
5340 # value_source default
5341 # Default value: NATURAL
5342 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5345 # RedBoot Flash Image System support
5346 # doc: ref/flash-image-system.html
5347 # This option enables the Flash Image System commands
5348 # and support within RedBoot. If disabled, simple Flash
5349 # access commands such as "fis write" will still exist.
5350 # This option would be disabled for targets that need simple
5351 # FLASH manipulation, but do not have the need or space for
5352 # complete image management.
5354 cdl_option CYGOPT_REDBOOT_FIS {
5356 # No user value, uncomment the following line to provide one.
5358 # value_source default
5361 # The following properties are affected by this value
5362 # component CYGPKG_REDBOOT_FIS_CONTENTS
5363 # ActiveIf: CYGOPT_REDBOOT_FIS
5364 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5365 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5366 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5367 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5370 # Max number of chunks of free space to manage
5371 # If this option is defined then "fis free" will
5372 # rely on the FIS directory to determine what space is
5373 # free within the FLASH. This option controls the
5374 # maximum number of free segment which can be handled
5375 # (typically this number is small). If this option is
5376 # not enabled, the the archaic behaviour of actually
5377 # scanning the FLASH for erased sectors (unreliable)
5378 # will be used to determine what's free and what's
5381 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5383 # No user value, uncomment the following line to provide one.
5385 # value_source default
5386 # Default value: 1 32
5389 # Flash Image System default directory contents
5391 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5392 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5393 # CYGOPT_REDBOOT_FIS == 1
5396 # Calculated value: 1
5402 # Flash block containing the Directory
5403 # Which block of flash should hold the directory
5404 # information. Positive numbers are absolute block
5405 # numbers. Negative block numbers count backwards
5406 # from the last block. eg 2 means block 2, -2
5407 # means the last but one block.
5409 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5411 # No user value, uncomment the following line to provide one.
5413 # value_source default
5416 # The following properties are affected by this value
5417 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5418 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5419 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5422 # Redundant Flash Image System Directory Support
5423 # This option enables the use of a redundant FIS
5424 # directory within RedBoot. If enabled a flash block
5425 # will be reserved for a second copy of the fis
5426 # directory. Doing this allow for power failure safe
5427 # updates of the directory by the application.
5429 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5431 # No user value, uncomment the following line to provide one.
5433 # value_source default
5435 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5436 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5441 # Flash block containing the backup Directory
5442 # Which block of flash should hold the redundant
5443 # directory information. Positive numbers are
5444 # absolute block numbers. Negative block numbers
5445 # count backwards from the last block. eg 2 means
5446 # block 2, -2 means the last but one block.
5448 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5449 # This option is not active
5450 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5453 # No user value, uncomment the following line to provide one.
5455 # value_source default
5457 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5458 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5459 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5460 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5463 # The following properties are affected by this value
5464 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5465 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5466 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5470 # Pseudo-file to describe reserved area
5471 # If an area of FLASH is reserved, it is informative to
5472 # have a fis entry describing it. This option controls
5473 # creation of such an entry by default in the fis init
5476 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5477 # This option is not active
5478 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5479 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5483 # No user value, uncomment the following line to provide one.
5485 # value_source default
5489 # File to describe RedBoot boot image
5490 # Normally a ROM-startup RedBoot image is first in the
5491 # FLASH, and the system boots using that image. This
5492 # option controls creation of an entry describing it in
5493 # the fis init command. It might be disabled if a
5494 # platform has an immutable boot image of its own, where
5495 # we use a POST-startup RedBoot instead, which performs
5496 # less board initialization.
5498 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5500 # No user value, uncomment the following line to provide one.
5502 # value_source default
5505 # The following properties are affected by this value
5506 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5507 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5508 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5509 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5512 # File to describe RedBoot POST-compatible image
5513 # This option controls creation of an entry describing a
5514 # POST-startup RedBoot image in the fis init command.
5515 # Not all platforms support POST-startup. A platform
5516 # might have both for testing purposes, where the
5517 # eventual user would substitute their own POST code for
5518 # the initial ROM-startup RedBoot, and then jump to the
5519 # POST-compatible RedBoot immediately following.
5521 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5523 # No user value, uncomment the following line to provide one.
5525 # value_source default
5526 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5527 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5532 # Offset of POST image from FLASH start
5533 # This option specifies the offset for a POST image from
5534 # the start of FLASH. If unset, then the fis entry
5535 # describing the POST image will be placed where
5538 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5539 # This option is not active
5540 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5543 # No user value, uncomment the following line to provide one.
5545 # value_source default
5546 # Default value: 0 0
5547 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5548 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5549 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5552 # The following properties are affected by this value
5553 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5554 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5558 # File to describe RedBoot backup image
5559 # This option controls creation of an entry describing a
5560 # backup RedBoot image in the fis init command.
5561 # Conventionally a RAM-startup RedBoot image is kept
5562 # under this name for use in updating the ROM-based
5563 # RedBoot that boots the board.
5565 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5567 # No user value, uncomment the following line to provide one.
5569 # value_source default
5573 # Include ARM SIB ID in FIS
5574 # If set, this option will cause the last 5 words of
5575 # the FIS to include the special ID needed for the
5576 # flash to be recognized as a reserved area for RedBoot
5577 # by an ARM BootRom monitor.
5579 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5581 # No user value, uncomment the following line to provide one.
5583 # value_source default
5587 # Size of FIS directory entry
5588 # The FIS directory is limited to one single flash
5589 # sector. If your flash has tiny sectors, you may wish
5590 # to reduce this value in order to get more slots in
5591 # the FIS directory.
5593 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5595 # No user value, uncomment the following line to provide one.
5597 # value_source default
5598 # Default value: 256
5601 # Number of FIS directory entries
5602 # The FIS directory normally occupies a single flash
5603 # sector. Adjusting this value can allow for more than
5604 # one flash sector to be used, which is useful if your
5605 # sectors are very small.
5607 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5609 # No user value, uncomment the following line to provide one.
5611 # value_source default
5615 # Maximum RedBoot image size
5616 # This option controls the maximum length reserved
5617 # for the RedBoot boot image in the FIS table.
5618 # This should be a multiple of the flash's erase
5621 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5623 # No user value, uncomment the following line to provide one.
5624 # user_value 0x00020000
5625 # The inferred value should not be edited directly.
5626 inferred_value 0x00040000
5627 # value_source inferred
5628 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5629 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5633 # Offset from start of FLASH to RedBoot boot image
5634 # This option controls where the RedBoot boot image is
5635 # located relative to the start of FLASH.
5637 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5639 # No user value, uncomment the following line to provide one.
5641 # value_source default
5642 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5643 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5645 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5646 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5647 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5650 # The following properties are affected by this value
5651 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5652 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5653 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5654 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5655 # component CYGPKG_HAL_ARM_TX37_OPTIONS
5656 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5659 # Size of reserved area at start of FLASH
5660 # This option reserves an area at the start of
5661 # FLASH where RedBoot will never interfere; it is
5662 # expected that this area contains
5663 # (non-RedBoot-based) POST code or some other boot
5664 # monitor that executes before RedBoot.
5666 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5668 # No user value, uncomment the following line to provide one.
5670 # value_source default
5673 # The following properties are affected by this value
5674 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5675 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5676 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5677 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5678 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5679 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5683 # Keep all RedBoot FLASH data blocks locked.
5684 # When this option is enabled, RedBoot will keep configuration
5685 # data and the FIS directory blocks implicitly locked. While
5686 # this is somewhat safer, it does add overhead during updates.
5688 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5689 # This option is not active
5690 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5691 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5695 # No user value, uncomment the following line to provide one.
5697 # value_source default
5701 # Use CRC checksums on FIS images.
5702 # When this option is enabled, RedBoot will use CRC checksums
5703 # when reading and writing flash images.
5705 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5707 # No user value, uncomment the following line to provide one.
5709 # The inferred value should not be edited directly.
5711 # value_source inferred
5715 # ARM FLASH drivers support SIB flash block structure
5716 # This interface is implemented by a flash driver
5717 # to indicate that it supports the ARM SIB flash
5720 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5721 # No options implement this inferface
5722 # ActiveIf constraint: CYGPKG_HAL_ARM
5723 # CYGPKG_HAL_ARM == current
5726 # This value cannot be modified here.
5730 # The following properties are affected by this value
5731 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5732 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5735 # Use ARM SIB flash block structure
5736 # This option is used to interpret ARM Flash System
5737 # information blocks.
5739 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5740 # This option is not active
5741 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5742 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5746 # No user value, uncomment the following line to provide one.
5748 # value_source default
5753 # Keep RedBoot configuration data in FLASH
5754 # When this option is enabled, RedBoot will keep configuration
5755 # data in a separate block of FLASH memory. This data will
5756 # include such items as the node IP address or startup scripts.
5758 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5760 # No user value, uncomment the following line to provide one.
5762 # value_source default
5763 # Default value: CYGPKG_IO_FLASH != 0
5764 # CYGPKG_IO_FLASH == current
5767 # The following properties are affected by this value
5768 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5769 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5770 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5771 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5772 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5773 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5774 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5775 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5776 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5777 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5778 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5779 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5780 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5781 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5785 # Length of configuration data in FLASH
5786 # This option is used to control the amount of memory and FLASH
5787 # to be used for configuration options (persistent storage).
5789 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5791 # No user value, uncomment the following line to provide one.
5793 # value_source default
5794 # Default value: 4096
5797 # Style of media used for persistent data storage
5798 # Persistent data storage can either be held in 'norma' FLASH
5799 # or some other device (represented by the 'EEPROM' choice).
5800 # The different styles utilize different access methods.
5802 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5804 # No user value, uncomment the following line to provide one.
5806 # value_source default
5807 # Default value: FLASH
5808 # Legal values: "FLASH" "EEPROM"
5810 # The following properties are affected by this value
5811 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5812 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5813 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5814 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5817 # Merged config data and FIS directory
5818 # If this option is set, then the FIS directory and FLASH
5819 # configuration database will be stored in the same physical
5822 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5823 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5824 # CYGOPT_REDBOOT_FIS == 1
5825 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5829 # No user value, uncomment the following line to provide one.
5831 # value_source default
5834 # The following properties are affected by this value
5835 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5836 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5839 # Which block of flash to use
5840 # Which block of flash should hold the configuration
5841 # information. Positive numbers are absolute block numbers.
5842 # Negative block numbers count backwards from the last block.
5843 # eg 2 means block 2, -2 means the last but one block.
5845 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5847 # No user value, uncomment the following line to provide one.
5849 # value_source default
5853 # Support simple macros/aliases in FLASH
5854 # This option is used to allow support for simple text-based
5855 # macros (aliases). These aliases are kept in the FLASH
5856 # configuration data (persistent storage).
5858 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5860 # No user value, uncomment the following line to provide one.
5862 # value_source default
5866 # Length of strings in FLASH configuration data
5867 # This option is used to control the amount of memory
5868 # and FLASH to be used for string configuration
5869 # options (persistent storage).
5871 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5873 # No user value, uncomment the following line to provide one.
5875 # value_source default
5876 # Default value: 128
5879 # Length of configuration script(s) in FLASH
5880 # This option is used to control the amount of memory and
5881 # FLASH to be used for configuration options (persistent
5884 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5886 # No user value, uncomment the following line to provide one.
5888 # The inferred value should not be edited directly.
5890 # value_source inferred
5891 # Default value: 512
5894 # Fallback to read-only FLASH configuration
5895 # This option will cause the configuration information to
5896 # revert to the readonly information stored in the FLASH.
5897 # The option only takes effect after
5898 # 1) the config_ok flag has been set to be true,
5899 # indicating that at one time the copy in RAM was valid;
5901 # 2) the information in RAM has been verified to be invalid
5903 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5905 # No user value, uncomment the following line to provide one.
5907 # value_source default
5908 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5909 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5914 # Allow RedBoot to support fileio
5915 # If this option is enabled then RedBoot will provide commands
5916 # to load files from fileio file systems such as JFFS2.
5918 cdl_component CYGPKG_REDBOOT_FILEIO {
5919 # This option is not active
5920 # ActiveIf constraint: CYGPKG_IO_FILEIO
5921 # CYGPKG_IO_FILEIO (unknown) == 0
5925 # No user value, uncomment the following line to provide one.
5927 # value_source default
5930 # The following properties are affected by this value
5931 # option CYGNUM_REDBOOT_GETC_BUFFER
5932 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5936 # Include an ls command
5937 # If this option is enabled a simple ls command will be
5938 # included in redboot so the contents of a directory
5941 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5942 # This option is not active
5943 # The parent CYGPKG_REDBOOT_FILEIO is not active
5946 # No user value, uncomment the following line to provide one.
5948 # value_source default
5953 # Allow RedBoot to support disks
5954 # If this option is enabled then RedBoot will provide commands
5955 # to load disk files.
5957 cdl_component CYGPKG_REDBOOT_DISK {
5965 # Include Redboot commands for disk access
5967 cdl_option CYGSEM_REDBOOT_DISK {
5968 # This option is not active
5969 # The parent CYGPKG_REDBOOT_DISK is disabled
5972 # No user value, uncomment the following line to provide one.
5974 # value_source default
5975 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
5976 # CYGINT_REDBOOT_DISK_DRIVERS == 0
5980 # Hardware drivers for disk-type devices
5982 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
5983 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
5984 # This option is not active
5985 # The parent CYGPKG_REDBOOT_DISK is disabled
5987 # This value cannot be modified here.
5991 # The following properties are affected by this value
5992 # option CYGSEM_REDBOOT_DISK
5993 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
5996 # Maximum number of supported disks
5997 # This option controls the number of disks supported by
6000 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6001 # This option is not active
6002 # The parent CYGPKG_REDBOOT_DISK is disabled
6005 # No user value, uncomment the following line to provide one.
6007 # value_source default
6011 # Maximum number of partitions per disk
6012 # This option controls the maximum number of supported
6013 # partitions per disk.
6015 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6016 # This option is not active
6017 # The parent CYGPKG_REDBOOT_DISK is disabled
6020 # No user value, uncomment the following line to provide one.
6022 # value_source default
6026 # Support IDE disks.
6027 # When this option is enabled, RedBoot will support IDE disks.
6029 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6030 # This option is not active
6031 # The parent CYGPKG_REDBOOT_DISK is disabled
6032 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6033 # CYGINT_HAL_PLF_IF_IDE == 0
6037 # No user value, uncomment the following line to provide one.
6039 # value_source default
6044 # Work with VMware virtual disks
6045 # This option controls the disk driver behavior at
6048 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6049 # This option is not active
6050 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6053 # No user value, uncomment the following line to provide one.
6055 # value_source default
6060 # Support Linux second extended filesystems.
6061 # When this option is enabled, RedBoot will support EXT2
6064 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6065 # This option is not active
6066 # The parent CYGPKG_REDBOOT_DISK is disabled
6069 # No user value, uncomment the following line to provide one.
6071 # value_source default
6075 # Support ISO9660 filesystems.
6076 # When this option is enabled, RedBoot will support ISO9660
6079 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6080 # This option is not active
6081 # The parent CYGPKG_REDBOOT_DISK is disabled
6083 # Calculated value: 0
6090 # doc: ref/persistent-state-flash.html
6091 # This contains options related to RedBoot's boot script
6094 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6095 # There is no associated value.
6099 # Boot scripting enabled
6100 # This option controls whether RedBoot boot script
6101 # functionality is enabled.
6103 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6104 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6105 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6106 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6109 # Calculated value: 1
6114 # Use default RedBoot boot script
6115 # If enabled, this option will tell RedBoot to use the
6116 # value of this option as a default boot script.
6118 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6120 # No user value, uncomment the following line to provide one.
6122 # value_source default
6123 # Default value: 0 0
6125 # The following properties are affected by this value
6126 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6127 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6130 # Resolution (in ms) for script timeout value.
6131 # This option controls the resolution of the script
6132 # timeout. The value is specified in milliseconds
6133 # (ms), thus to have the script timeout be defined in
6134 # terms of tenths of seconds, use 100.
6136 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6138 # No user value, uncomment the following line to provide one.
6140 # The inferred value should not be edited directly.
6142 # value_source inferred
6143 # Default value: 1000
6146 # Script default timeout value
6147 # This option is used to set the default timeout for startup
6148 # scripts, when they are enabled.
6150 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6152 # No user value, uncomment the following line to provide one.
6154 # The inferred value should not be edited directly.
6156 # value_source inferred
6161 # Support RTC for time & date functions
6162 # When this option is enabled, RedBoot will support commands to
6163 # query and set the real time clock (time and date)
6165 cdl_option CYGSEM_REDBOOT_RTC {
6166 # This option is not active
6167 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6168 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6172 # No user value, uncomment the following line to provide one.
6174 # value_source default
6178 # Behave like a ROM monitor
6179 # Enabling this option will allow RedBoot to provide ROM
6180 # monitor-style services to programs which it executes.
6182 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6183 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6184 # CYG_HAL_STARTUP == ROMRAM
6185 # CYG_HAL_STARTUP == ROMRAM
6188 # Calculated value: 1
6191 # Requires: CYGSEM_HAL_ROM_MONITOR
6192 # CYGSEM_HAL_ROM_MONITOR == 1
6196 # Allow RedBoot to handle GNUPro application 'syscalls'.
6197 # If this option is enabled then RedBoot will install a
6198 # syscall handler to support debugging of applications
6199 # based on GNUPro newlib/bsp.
6201 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6203 # No user value, uncomment the following line to provide one.
6205 # value_source default
6208 # The following properties are affected by this value
6209 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6210 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6211 # option CYGPKG_HAL_GDB_FILEIO
6212 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6216 # Support additional syscalls for 'gprof' profiling
6217 # Support additional syscalls to support a periodic callback
6218 # function for histogram-style profiling, and an enquire/set
6220 # The application must use the GNUPro newlib facilities
6223 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6224 # This option is not active
6225 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6226 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6227 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6231 # No user value, uncomment the following line to provide one.
6233 # value_source default
6237 # Does the HAL support 'gprof' profiling?
6239 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6240 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6241 # This option is not active
6242 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6244 # This value cannot be modified here.
6248 # The following properties are affected by this value
6249 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6250 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6253 # Do not raise SIGTRAP when program exits
6254 # For some (single shot) newlib based programs,
6255 # exiting and returning a termination status may be
6256 # the normal expected behavior.
6258 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6259 # This option is not active
6260 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6263 # No user value, uncomment the following line to provide one.
6265 # value_source default
6270 # Use a common buffer for Zlib and FIS
6271 # Use a common memory buffer for both the zlib workspace
6272 # and FIS directory operations. This can save a substantial
6273 # amount of RAM, especially when flash sectors are large.
6275 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6276 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6277 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6278 # CYGOPT_REDBOOT_FIS == 1
6282 # No user value, uncomment the following line to provide one.
6284 # value_source default
6289 # Size of Zlib/FIS common buffer
6290 # Size of common buffer to allocate. Must be at least the
6291 # size of one flash sector.
6293 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6294 # This option is not active
6295 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6298 # No user value, uncomment the following line to provide one.
6299 # user_value 0x0000C000
6300 # value_source default
6301 # Default value: 0x0000C000
6302 # Legal values: 0x4000 to 0x80000000
6306 # Buffer size in getc when loading images
6307 # When loading images a buffer is used between redboot and the
6308 # underlying storage medium, eg a filesystem, or a socket etc.
6309 # The size of this buffer can have a big impart on load speed.
6311 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6313 # No user value, uncomment the following line to provide one.
6315 # value_source default
6316 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6317 # CYGPKG_REDBOOT_FILEIO == 0
6322 # Redboot for ARM options
6323 # This option lists the target's requirements for a valid Redboot
6326 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6327 # ActiveIf constraint: CYGPKG_REDBOOT
6328 # CYGPKG_REDBOOT == current
6331 # There is no associated value.
6333 # The following properties are affected by this value
6337 # Provide the exec command in RedBoot
6338 # This option contains requirements for booting linux
6339 # from RedBoot. The component is enabled/disabled from
6342 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6343 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6344 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6347 # There is no associated value.
6351 # Enable -x switch for exec command.
6352 # This option allows bi-endian platforms to launch kernels
6353 # built for an endianess different than the RedBoot endianess
6355 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6357 # No user value, uncomment the following line to provide one.
6359 # value_source default
6363 # Physical base address of linux kernel
6364 # This is the physical address of the base of the
6365 # Linux kernel image.
6367 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6369 # No user value, uncomment the following line to provide one.
6370 # user_value 0x40108000
6371 # The inferred value should not be edited directly.
6372 inferred_value 0x40108000
6373 # value_source inferred
6374 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6375 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000
6379 # Default physical base address of linux kernel
6380 # This is the physical address of the base of the
6381 # Linux kernel image. This option gets set by the
6384 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6386 # No user value, uncomment the following line to provide one.
6387 # user_value 0x00008000
6388 # The inferred value should not be edited directly.
6389 inferred_value 0x40108000
6390 # value_source inferred
6391 # Default value: 0x00008000
6393 # The following properties are affected by this value
6394 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6395 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6396 # component CYGPKG_REDBOOT_HAL_TX37_OPTIONS
6397 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000
6400 # Base address of linux kernel parameter tags
6401 # This is the base address of the area of memory used to
6402 # pass parameters to the Linux kernel. This should be chosen
6403 # to avoid overlap with the kernel and any ramdisk image.
6405 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6407 # No user value, uncomment the following line to provide one.
6408 # user_value 0x00000100
6409 # value_source default
6410 # Default value: 0x00000100
6415 # Redboot HAL options
6416 # This option lists the target's requirements for a valid Redboot
6419 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6420 # ActiveIf constraint: CYGPKG_REDBOOT
6421 # CYGPKG_REDBOOT == current
6424 # There is no associated value.
6428 # Build Redboot ROM binary image
6429 # This option enables the conversion of the Redboot ELF
6430 # image to a binary image suitable for ROM programming.
6432 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6433 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6434 # CYGBLD_BUILD_REDBOOT == 1
6438 # No user value, uncomment the following line to provide one.
6440 # value_source default
6445 # Redboot HAL variant options
6447 cdl_component CYGPKG_REDBOOT_HAL_TX37_OPTIONS {
6448 # ActiveIf constraint: CYGPKG_REDBOOT
6449 # CYGPKG_REDBOOT == current
6452 # There is no associated value.
6453 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000
6454 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000
6459 # ISO C and POSIX infrastructure
6460 # eCos supports implementations of ISO C libraries and POSIX
6461 # implementations. This package provides infrastructure used by
6462 # all such implementations.
6464 cdl_package CYGPKG_ISOINFRA {
6465 # Packages cannot be added or removed, nor can their version be changed,
6466 # simply by editing their value. Instead the appropriate configuration
6467 # should be used to perform these actions.
6469 # This value cannot be modified here.
6471 # Current value: 1 current
6473 # The following properties are affected by this value
6474 # component CYGBLD_BUILD_REDBOOT
6475 # Requires: CYGPKG_ISOINFRA
6476 # package CYGPKG_LIBC_STRING
6477 # Requires: CYGPKG_ISOINFRA
6478 # package CYGPKG_COMPRESS_ZLIB
6479 # Requires: CYGPKG_ISOINFRA
6480 # package CYGPKG_IO_FLASH
6481 # Requires: CYGPKG_ISOINFRA
6482 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6483 # Requires: CYGPKG_ISOINFRA
6484 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6485 # DefaultValue: 0 != CYGPKG_ISOINFRA
6486 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6487 # ActiveIf: CYGPKG_ISOINFRA
6488 # package CYGPKG_LIBC_I18N
6489 # Requires: CYGPKG_ISOINFRA
6490 # package CYGPKG_LIBC_STDLIB
6491 # Requires: CYGPKG_ISOINFRA
6495 # Startup and termination
6497 cdl_component CYGPKG_ISO_STARTUP {
6498 # There is no associated value.
6502 # main() startup implementations
6503 # Implementations of this interface arrange for a user-supplied
6504 # main() to be called in an ISO compatible environment.
6506 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6507 # No options implement this inferface
6508 # This value cannot be modified here.
6511 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6512 # CYGINT_ISO_MAIN_STARTUP == 0
6515 # The following properties are affected by this value
6516 # interface CYGINT_ISO_MAIN_STARTUP
6517 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6520 # environ implementations
6521 # Implementations of this interface provide the environ
6522 # variable required by POSIX.
6524 cdl_interface CYGINT_ISO_ENVIRON {
6525 # No options implement this inferface
6526 # This value cannot be modified here.
6529 # Requires: 1 >= CYGINT_ISO_ENVIRON
6530 # CYGINT_ISO_ENVIRON == 0
6533 # The following properties are affected by this value
6534 # interface CYGINT_ISO_ENVIRON
6535 # Requires: 1 >= CYGINT_ISO_ENVIRON
6541 cdl_component CYGPKG_ISO_CTYPE_H {
6542 # There is no associated value.
6546 # Number of implementations of ctype functions
6548 cdl_interface CYGINT_ISO_CTYPE {
6549 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6550 # This value cannot be modified here.
6553 # Requires: 1 >= CYGINT_ISO_CTYPE
6554 # CYGINT_ISO_CTYPE == 1
6557 # The following properties are affected by this value
6558 # interface CYGINT_ISO_CTYPE
6559 # Requires: 1 >= CYGINT_ISO_CTYPE
6560 # package CYGPKG_HAL_ARM_TX37KARO
6561 # Requires: CYGINT_ISO_CTYPE
6562 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6563 # Requires: CYGINT_ISO_CTYPE
6564 # package CYGPKG_LIBC_STDLIB
6565 # Requires: CYGINT_ISO_CTYPE
6568 # Ctype implementation header
6570 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6572 # No user value, uncomment the following line to provide one.
6574 # The inferred value should not be edited directly.
6575 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6576 # value_source inferred
6577 # Default value: 0 0
6579 # The following properties are affected by this value
6580 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6581 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6582 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6583 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6589 cdl_component CYGPKG_ISO_ERRNO {
6590 # There is no associated value.
6594 # Number of implementations of error codes
6596 cdl_interface CYGINT_ISO_ERRNO_CODES {
6597 # Implemented by CYGPKG_ERROR, active, enabled
6598 # This value cannot be modified here.
6601 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6602 # CYGINT_ISO_ERRNO_CODES == 1
6605 # The following properties are affected by this value
6606 # interface CYGINT_ISO_ERRNO_CODES
6607 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6610 # Error codes implementation header
6612 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6614 # No user value, uncomment the following line to provide one.
6616 # The inferred value should not be edited directly.
6617 inferred_value 1 <cyg/error/codes.h>
6618 # value_source inferred
6619 # Default value: 0 0
6621 # The following properties are affected by this value
6622 # package CYGPKG_ERROR
6623 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6626 # Number of implementations of errno variable
6628 cdl_interface CYGINT_ISO_ERRNO {
6629 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6630 # This value cannot be modified here.
6633 # Requires: 1 >= CYGINT_ISO_ERRNO
6634 # CYGINT_ISO_ERRNO == 1
6637 # The following properties are affected by this value
6638 # interface CYGINT_ISO_ERRNO
6639 # Requires: 1 >= CYGINT_ISO_ERRNO
6642 # errno variable implementation header
6644 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6646 # No user value, uncomment the following line to provide one.
6648 # The inferred value should not be edited directly.
6649 inferred_value 1 <cyg/error/errno.h>
6650 # value_source inferred
6651 # Default value: 0 0
6653 # The following properties are affected by this value
6654 # component CYGPKG_ERROR_ERRNO
6655 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6659 # Locale-related functions
6661 cdl_component CYGPKG_ISO_LOCALE {
6662 # There is no associated value.
6666 # Number of implementations of locale functions
6668 cdl_interface CYGINT_ISO_LOCALE {
6669 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6670 # This value cannot be modified here.
6673 # Requires: 1 >= CYGINT_ISO_LOCALE
6674 # CYGINT_ISO_LOCALE == 1
6677 # The following properties are affected by this value
6678 # interface CYGINT_ISO_LOCALE
6679 # Requires: 1 >= CYGINT_ISO_LOCALE
6682 # Locale implementation header
6684 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6686 # No user value, uncomment the following line to provide one.
6688 # value_source default
6689 # Default value: 0 0
6693 # Standard I/O-related functionality
6695 cdl_component CYGPKG_ISO_STDIO {
6696 # There is no associated value.
6700 # Number of implementations of stdio file types
6702 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6703 # No options implement this inferface
6704 # This value cannot be modified here.
6706 # Current value: 0 0
6707 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6708 # CYGINT_ISO_STDIO_FILETYPES == 0
6711 # The following properties are affected by this value
6712 # interface CYGINT_ISO_STDIO_FILETYPES
6713 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6716 # Stdio file types implementation header
6718 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6720 # No user value, uncomment the following line to provide one.
6722 # value_source default
6723 # Default value: 0 0
6726 # Stdio standard streams implementations
6728 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6729 # No options implement this inferface
6730 # This value cannot be modified here.
6732 # Current value: 0 0
6733 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6734 # CYGINT_ISO_STDIO_STREAMS == 0
6737 # The following properties are affected by this value
6738 # interface CYGINT_ISO_STDIO_STREAMS
6739 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6742 # Stdio standard streams implementation header
6743 # This header file must define stdin, stdout
6746 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6748 # No user value, uncomment the following line to provide one.
6750 # value_source default
6751 # Default value: 0 0
6754 # Number of implementations of stdio file operations
6756 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6757 # No options implement this inferface
6758 # This value cannot be modified here.
6760 # Current value: 0 0
6761 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6762 # CYGINT_ISO_STDIO_FILEOPS == 0
6765 # The following properties are affected by this value
6766 # interface CYGINT_ISO_STDIO_FILEOPS
6767 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6770 # Stdio file operations implementation header
6771 # This header controls the file system operations on a file
6772 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6775 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6777 # No user value, uncomment the following line to provide one.
6779 # value_source default
6780 # Default value: 0 0
6783 # Number of implementations of stdio file access functionals
6785 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6786 # No options implement this inferface
6787 # This value cannot be modified here.
6789 # Current value: 0 0
6790 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6791 # CYGINT_ISO_STDIO_FILEACCESS == 0
6794 # The following properties are affected by this value
6795 # interface CYGINT_ISO_STDIO_FILEACCESS
6796 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6797 # option CYGFUN_COMPRESS_ZLIB_GZIO
6798 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6801 # Stdio file access implementation header
6802 # This header controls the file access operations
6803 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6804 # setvbuf(), and associated constants.
6806 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6808 # No user value, uncomment the following line to provide one.
6810 # value_source default
6811 # Default value: 0 0
6814 # Number of implementations of stdio formatted I/O
6816 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6817 # No options implement this inferface
6818 # This value cannot be modified here.
6820 # Current value: 0 0
6821 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6822 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6825 # The following properties are affected by this value
6826 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6827 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6828 # option CYGFUN_COMPRESS_ZLIB_GZIO
6829 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6832 # Stdio formatted I/O implementation header
6834 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6836 # No user value, uncomment the following line to provide one.
6838 # value_source default
6839 # Default value: 0 0
6842 # Number of implementations of stdio character I/O
6844 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6845 # No options implement this inferface
6846 # This value cannot be modified here.
6848 # Current value: 0 0
6849 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6850 # CYGINT_ISO_STDIO_CHAR_IO == 0
6853 # The following properties are affected by this value
6854 # interface CYGINT_ISO_STDIO_CHAR_IO
6855 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6858 # Stdio character I/O implementation header
6860 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6862 # No user value, uncomment the following line to provide one.
6864 # value_source default
6865 # Default value: 0 0
6868 # Number of implementations of stdio direct I/O
6870 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6871 # No options implement this inferface
6872 # This value cannot be modified here.
6874 # Current value: 0 0
6875 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6876 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6879 # The following properties are affected by this value
6880 # interface CYGINT_ISO_STDIO_DIRECT_IO
6881 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6884 # Stdio direct I/O implementation header
6886 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6888 # No user value, uncomment the following line to provide one.
6890 # value_source default
6891 # Default value: 0 0
6894 # Number of implementations of stdio file positioning
6896 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6897 # No options implement this inferface
6898 # This value cannot be modified here.
6900 # Current value: 0 0
6901 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6902 # CYGINT_ISO_STDIO_FILEPOS == 0
6905 # The following properties are affected by this value
6906 # interface CYGINT_ISO_STDIO_FILEPOS
6907 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6908 # option CYGFUN_COMPRESS_ZLIB_GZIO
6909 # Requires: CYGINT_ISO_STDIO_FILEPOS
6912 # Stdio file positioning implementation header
6914 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6916 # No user value, uncomment the following line to provide one.
6918 # value_source default
6919 # Default value: 0 0
6922 # Number of implementations of stdio error handling
6924 cdl_interface CYGINT_ISO_STDIO_ERROR {
6925 # No options implement this inferface
6926 # This value cannot be modified here.
6928 # Current value: 0 0
6929 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6930 # CYGINT_ISO_STDIO_ERROR == 0
6933 # The following properties are affected by this value
6934 # interface CYGINT_ISO_STDIO_ERROR
6935 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6938 # Stdio error handling implementation header
6940 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6942 # No user value, uncomment the following line to provide one.
6944 # value_source default
6945 # Default value: 0 0
6948 # POSIX fd-related function implementations
6950 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6951 # No options implement this inferface
6952 # This value cannot be modified here.
6954 # Current value: 0 0
6955 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6956 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6959 # The following properties are affected by this value
6960 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6961 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6964 # POSIX fd-related function implementation header
6966 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
6968 # No user value, uncomment the following line to provide one.
6970 # value_source default
6971 # Default value: 0 0
6975 # Standard general utility functions
6977 cdl_component CYGPKG_ISO_STDLIB {
6978 # There is no associated value.
6982 # String conversion function implementations
6984 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
6985 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
6986 # This value cannot be modified here.
6989 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
6990 # CYGINT_ISO_STDLIB_STRCONV == 1
6993 # The following properties are affected by this value
6994 # interface CYGINT_ISO_STDLIB_STRCONV
6995 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
6998 # String conversion function implementation header
7000 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7002 # No user value, uncomment the following line to provide one.
7004 # The inferred value should not be edited directly.
7005 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7006 # value_source inferred
7007 # Default value: 0 0
7009 # The following properties are affected by this value
7010 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7011 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7014 # String to FP conversion function implementations
7016 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7017 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7018 # This value cannot be modified here.
7021 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7022 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7025 # The following properties are affected by this value
7026 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7027 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7030 # String to FP conversion function implementation header
7032 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7034 # No user value, uncomment the following line to provide one.
7036 # value_source default
7037 # Default value: 0 0
7040 # Random number generator implementations
7042 cdl_interface CYGINT_ISO_RAND {
7043 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7044 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7045 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7046 # This value cannot be modified here.
7049 # Requires: 1 >= CYGINT_ISO_RAND
7050 # CYGINT_ISO_RAND == 1
7053 # The following properties are affected by this value
7054 # interface CYGINT_ISO_RAND
7055 # Requires: 1 >= CYGINT_ISO_RAND
7058 # Random number generator implementation header
7060 cdl_option CYGBLD_ISO_RAND_HEADER {
7062 # No user value, uncomment the following line to provide one.
7064 # value_source default
7065 # Default value: 0 0
7068 # Malloc implementations
7070 cdl_interface CYGINT_ISO_MALLOC {
7071 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7072 # This value cannot be modified here.
7075 # Requires: 1 >= CYGINT_ISO_MALLOC
7076 # CYGINT_ISO_MALLOC == 1
7079 # The following properties are affected by this value
7080 # interface CYGINT_ISO_MALLOC
7081 # Requires: 1 >= CYGINT_ISO_MALLOC
7082 # option CYGFUN_LIBC_STRING_STRDUP
7083 # ActiveIf: CYGINT_ISO_MALLOC
7086 # Malloc implementation header
7088 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7090 # No user value, uncomment the following line to provide one.
7092 # value_source default
7093 # Default value: 0 0
7096 # Mallinfo() implementations
7098 cdl_interface CYGINT_ISO_MALLINFO {
7099 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7100 # This value cannot be modified here.
7103 # Requires: 1 >= CYGINT_ISO_MALLINFO
7104 # CYGINT_ISO_MALLINFO == 1
7107 # The following properties are affected by this value
7108 # interface CYGINT_ISO_MALLINFO
7109 # Requires: 1 >= CYGINT_ISO_MALLINFO
7112 # Mallinfo() implementation header
7114 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7116 # No user value, uncomment the following line to provide one.
7118 # value_source default
7119 # Default value: 0 0
7122 # Program exit functionality implementations
7124 cdl_interface CYGINT_ISO_EXIT {
7125 # No options implement this inferface
7126 # This value cannot be modified here.
7129 # Requires: 1 >= CYGINT_ISO_EXIT
7130 # CYGINT_ISO_EXIT == 0
7133 # The following properties are affected by this value
7134 # interface CYGINT_ISO_EXIT
7135 # Requires: 1 >= CYGINT_ISO_EXIT
7136 # option CYGFUN_INFRA_DUMMY_ABORT
7137 # Requires: !CYGINT_ISO_EXIT
7138 # option CYGFUN_INFRA_DUMMY_ABORT
7139 # DefaultValue: CYGINT_ISO_EXIT == 0
7142 # Program exit functionality implementation header
7144 cdl_option CYGBLD_ISO_EXIT_HEADER {
7146 # No user value, uncomment the following line to provide one.
7148 # value_source default
7149 # Default value: 0 0
7152 # Program environment implementations
7154 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7155 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7156 # This value cannot be modified here.
7159 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7160 # CYGINT_ISO_STDLIB_ENVIRON == 1
7163 # The following properties are affected by this value
7164 # interface CYGINT_ISO_STDLIB_ENVIRON
7165 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7168 # Program environment implementation header
7170 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7172 # No user value, uncomment the following line to provide one.
7174 # value_source default
7175 # Default value: 0 0
7178 # system() implementations
7180 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7181 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7182 # This value cannot be modified here.
7185 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7186 # CYGINT_ISO_STDLIB_SYSTEM == 1
7189 # The following properties are affected by this value
7190 # interface CYGINT_ISO_STDLIB_SYSTEM
7191 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7194 # system() implementation header
7196 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7198 # No user value, uncomment the following line to provide one.
7200 # value_source default
7201 # Default value: 0 0
7204 # bsearch() implementations
7206 cdl_interface CYGINT_ISO_BSEARCH {
7207 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7208 # This value cannot be modified here.
7211 # Requires: 1 >= CYGINT_ISO_BSEARCH
7212 # CYGINT_ISO_BSEARCH == 1
7215 # The following properties are affected by this value
7216 # interface CYGINT_ISO_BSEARCH
7217 # Requires: 1 >= CYGINT_ISO_BSEARCH
7220 # bsearch() implementation header
7222 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7224 # No user value, uncomment the following line to provide one.
7226 # value_source default
7227 # Default value: 0 0
7230 # qsort() implementations
7232 cdl_interface CYGINT_ISO_QSORT {
7233 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7234 # This value cannot be modified here.
7237 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7238 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7241 # The following properties are affected by this value
7244 # qsort() implementation header
7246 cdl_option CYGBLD_ISO_QSORT_HEADER {
7248 # No user value, uncomment the following line to provide one.
7250 # value_source default
7251 # Default value: 0 0
7254 # abs()/labs() implementations
7256 cdl_interface CYGINT_ISO_ABS {
7257 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7258 # This value cannot be modified here.
7261 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7262 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7265 # The following properties are affected by this value
7268 # abs()/labs() implementation header
7270 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7272 # No user value, uncomment the following line to provide one.
7274 # The inferred value should not be edited directly.
7275 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7276 # value_source inferred
7277 # Default value: 0 0
7279 # The following properties are affected by this value
7280 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7281 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7284 # div()/ldiv() implementations
7286 cdl_interface CYGINT_ISO_DIV {
7287 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7288 # This value cannot be modified here.
7291 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7292 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7295 # The following properties are affected by this value
7298 # div()/ldiv() implementation header
7300 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7302 # No user value, uncomment the following line to provide one.
7304 # The inferred value should not be edited directly.
7305 inferred_value 1 <cyg/libc/stdlib/div.inl>
7306 # value_source inferred
7307 # Default value: 0 0
7309 # The following properties are affected by this value
7310 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7311 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7314 # Header defining the implementation's MB_CUR_MAX
7316 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7318 # No user value, uncomment the following line to provide one.
7320 # value_source default
7321 # Default value: 0 0
7323 # The following properties are affected by this value
7324 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7325 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7328 # Multibyte character implementations
7330 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7331 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7332 # This value cannot be modified here.
7335 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7336 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7339 # The following properties are affected by this value
7340 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7341 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7344 # Multibyte character implementation header
7346 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7348 # No user value, uncomment the following line to provide one.
7350 # value_source default
7351 # Default value: 0 0
7357 cdl_component CYGPKG_ISO_STRING {
7358 # There is no associated value.
7362 # Number of implementations of strerror() function
7364 cdl_interface CYGINT_ISO_STRERROR {
7365 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7366 # This value cannot be modified here.
7368 # Current value: 1 1
7369 # Requires: 1 >= CYGINT_ISO_STRERROR
7370 # CYGINT_ISO_STRERROR == 1
7373 # The following properties are affected by this value
7374 # interface CYGINT_ISO_STRERROR
7375 # Requires: 1 >= CYGINT_ISO_STRERROR
7378 # strerror() implementation header
7380 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7382 # No user value, uncomment the following line to provide one.
7384 # The inferred value should not be edited directly.
7385 inferred_value 1 <cyg/error/strerror.h>
7386 # value_source inferred
7387 # Default value: 0 0
7389 # The following properties are affected by this value
7390 # option CYGPKG_ERROR_STRERROR
7391 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7394 # memcpy() implementation header
7396 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7398 # No user value, uncomment the following line to provide one.
7400 # value_source default
7401 # Default value: 0 0
7404 # memset() implementation header
7406 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7408 # No user value, uncomment the following line to provide one.
7410 # value_source default
7411 # Default value: 0 0
7414 # Number of implementations of strtok_r() function
7416 cdl_interface CYGINT_ISO_STRTOK_R {
7417 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7418 # This value cannot be modified here.
7420 # Current value: 1 1
7421 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7422 # CYGINT_ISO_STRTOK_R == 1
7425 # The following properties are affected by this value
7426 # interface CYGINT_ISO_STRTOK_R
7427 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7430 # strtok_r() implementation header
7432 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7434 # No user value, uncomment the following line to provide one.
7436 # The inferred value should not be edited directly.
7437 inferred_value 1 <cyg/libc/string/string.h>
7438 # value_source inferred
7439 # Default value: 0 0
7441 # The following properties are affected by this value
7442 # package CYGPKG_LIBC_STRING
7443 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7446 # Number of implementations of locale-specific string functions
7447 # This covers locale-dependent string functions such as strcoll()
7450 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7451 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7452 # This value cannot be modified here.
7454 # Current value: 1 1
7455 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7456 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7459 # The following properties are affected by this value
7460 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7461 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7464 # Locale-specific string functions' implementation header
7465 # This covers locale-dependent string functions such as strcoll()
7468 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7470 # No user value, uncomment the following line to provide one.
7472 # The inferred value should not be edited directly.
7473 inferred_value 1 <cyg/libc/string/string.h>
7474 # value_source inferred
7475 # Default value: 0 0
7477 # The following properties are affected by this value
7478 # package CYGPKG_LIBC_STRING
7479 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7482 # Number of implementations of BSD string functions
7484 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7485 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7486 # This value cannot be modified here.
7488 # Current value: 0 0
7489 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7490 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7493 # The following properties are affected by this value
7494 # interface CYGINT_ISO_STRING_BSD_FUNCS
7495 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7498 # BSD string functions' implementation header
7500 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7502 # No user value, uncomment the following line to provide one.
7504 # The inferred value should not be edited directly.
7505 inferred_value 1 <cyg/libc/string/bsdstring.h>
7506 # value_source inferred
7507 # Default value: 0 0
7509 # The following properties are affected by this value
7510 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7511 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7514 # Number of implementations of other mem*() functions
7516 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7517 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7518 # This value cannot be modified here.
7520 # Current value: 1 1
7521 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7522 # CYGINT_ISO_STRING_MEMFUNCS == 1
7525 # The following properties are affected by this value
7526 # interface CYGINT_ISO_STRING_MEMFUNCS
7527 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7528 # component CYGBLD_BUILD_REDBOOT
7529 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7530 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7531 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7534 # Other mem*() functions' implementation header
7536 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7538 # No user value, uncomment the following line to provide one.
7540 # The inferred value should not be edited directly.
7541 inferred_value 1 <cyg/libc/string/string.h>
7542 # value_source inferred
7543 # Default value: 0 0
7545 # The following properties are affected by this value
7546 # package CYGPKG_LIBC_STRING
7547 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7550 # Number of implementations of other ISO C str*() functions
7551 # This covers the other str*() functions defined by ISO C.
7553 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7554 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7555 # This value cannot be modified here.
7557 # Current value: 1 1
7558 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7559 # CYGINT_ISO_STRING_STRFUNCS == 1
7562 # The following properties are affected by this value
7563 # interface CYGINT_ISO_STRING_STRFUNCS
7564 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7565 # option CYGFUN_INFRA_DUMMY_STRLEN
7566 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7567 # option CYGFUN_INFRA_DUMMY_STRLEN
7568 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7569 # component CYGBLD_BUILD_REDBOOT
7570 # Requires: CYGINT_ISO_STRING_STRFUNCS
7571 # component CYGPKG_IO_ETH_DRIVERS_NET
7572 # Requires: CYGINT_ISO_STRING_STRFUNCS
7573 # option CYGFUN_COMPRESS_ZLIB_GZIO
7574 # Requires: CYGINT_ISO_STRING_STRFUNCS
7575 # package CYGPKG_IO_FLASH
7576 # Requires: CYGINT_ISO_STRING_STRFUNCS
7577 # package CYGPKG_LIBC_STDLIB
7578 # Requires: CYGINT_ISO_STRING_STRFUNCS
7581 # Other ISO C str*() functions' implementation header
7582 # This covers the other str*() functions defined by ISO C.
7584 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7586 # No user value, uncomment the following line to provide one.
7588 # The inferred value should not be edited directly.
7589 inferred_value 1 <cyg/libc/string/string.h>
7590 # value_source inferred
7591 # Default value: 0 0
7593 # The following properties are affected by this value
7594 # package CYGPKG_LIBC_STRING
7595 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7599 # Clock and time functionality
7601 cdl_component CYGPKG_ISO_TIME {
7602 # There is no associated value.
7606 # time_t implementation header
7608 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7610 # No user value, uncomment the following line to provide one.
7612 # value_source default
7613 # Default value: 0 0
7616 # clock_t implementation header
7618 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7620 # No user value, uncomment the following line to provide one.
7622 # value_source default
7623 # Default value: 0 0
7626 # struct timeval implementation header
7628 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7630 # No user value, uncomment the following line to provide one.
7632 # value_source default
7633 # Default value: 0 0
7636 # fnmatch implementation header
7638 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7640 # No user value, uncomment the following line to provide one.
7642 # value_source default
7643 # Default value: 0 0
7646 # Number of implementations of POSIX timer types
7648 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7649 # No options implement this inferface
7650 # This value cannot be modified here.
7652 # Current value: 0 0
7653 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7654 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7657 # The following properties are affected by this value
7658 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7659 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7662 # POSIX timer types implementation header
7664 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7666 # No user value, uncomment the following line to provide one.
7668 # value_source default
7669 # Default value: 0 0
7672 # Number of implementations of POSIX clock types
7674 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7675 # No options implement this inferface
7676 # This value cannot be modified here.
7678 # Current value: 0 0
7679 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7680 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7683 # The following properties are affected by this value
7684 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7685 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7688 # POSIX clock types implementation header
7690 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7692 # No user value, uncomment the following line to provide one.
7694 # value_source default
7695 # Default value: 0 0
7698 # Number of implementations of ISO C types
7700 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7701 # No options implement this inferface
7702 # This value cannot be modified here.
7704 # Current value: 0 0
7705 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7706 # CYGINT_ISO_C_TIME_TYPES == 0
7709 # The following properties are affected by this value
7710 # interface CYGINT_ISO_C_TIME_TYPES
7711 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7714 # ISO C time types implementation header
7716 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7718 # No user value, uncomment the following line to provide one.
7720 # value_source default
7721 # Default value: 0 0
7724 # Number of implementations of POSIX timers
7726 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7727 # No options implement this inferface
7728 # This value cannot be modified here.
7730 # Current value: 0 0
7731 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7732 # CYGINT_ISO_POSIX_TIMERS == 0
7735 # The following properties are affected by this value
7736 # interface CYGINT_ISO_POSIX_TIMERS
7737 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7740 # POSIX timer implementation header
7742 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7744 # No user value, uncomment the following line to provide one.
7746 # value_source default
7747 # Default value: 0 0
7750 # Number of implementations of POSIX clocks
7752 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7753 # No options implement this inferface
7754 # This value cannot be modified here.
7756 # Current value: 0 0
7757 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7758 # CYGINT_ISO_POSIX_CLOCKS == 0
7761 # The following properties are affected by this value
7762 # interface CYGINT_ISO_POSIX_CLOCKS
7763 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7766 # POSIX clocks implementation header
7768 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7770 # No user value, uncomment the following line to provide one.
7772 # value_source default
7773 # Default value: 0 0
7776 # Number of implementations of ISO C clock functions
7778 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7779 # No options implement this inferface
7780 # This value cannot be modified here.
7782 # Current value: 0 0
7783 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7784 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7787 # The following properties are affected by this value
7788 # interface CYGINT_ISO_C_CLOCK_FUNCS
7789 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7792 # ISO C clock functions' implementation header
7794 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7796 # No user value, uncomment the following line to provide one.
7798 # value_source default
7799 # Default value: 0 0
7802 # Number of implementations of tzset() function
7804 cdl_interface CYGINT_ISO_TZSET {
7805 # No options implement this inferface
7806 # This value cannot be modified here.
7808 # Current value: 0 0
7809 # Requires: 1 >= CYGINT_ISO_TZSET
7810 # CYGINT_ISO_TZSET == 0
7813 # The following properties are affected by this value
7814 # interface CYGINT_ISO_TZSET
7815 # Requires: 1 >= CYGINT_ISO_TZSET
7818 # tzset() implementation header
7820 cdl_option CYGBLD_ISO_TZSET_HEADER {
7822 # No user value, uncomment the following line to provide one.
7824 # value_source default
7825 # Default value: 0 0
7829 # Signal functionality
7831 cdl_component CYGPKG_ISO_SIGNAL {
7832 # There is no associated value.
7836 # Number of implementations of signal numbers
7838 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7839 # No options implement this inferface
7840 # This value cannot be modified here.
7843 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7844 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7847 # The following properties are affected by this value
7848 # interface CYGINT_ISO_SIGNAL_NUMBERS
7849 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7852 # Signal numbering implementation header
7853 # This header provides the mapping of signal
7854 # names (e.g. SIGBUS) to numbers.
7856 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7858 # No user value, uncomment the following line to provide one.
7860 # value_source default
7861 # Default value: 0 0
7864 # Number of signal implementations
7866 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7867 # No options implement this inferface
7868 # This value cannot be modified here.
7871 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7872 # CYGINT_ISO_SIGNAL_IMPL == 0
7875 # The following properties are affected by this value
7876 # interface CYGINT_ISO_SIGNAL_IMPL
7877 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7880 # Signals implementation header
7882 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7884 # No user value, uncomment the following line to provide one.
7886 # value_source default
7887 # Default value: 0 0
7890 # POSIX real time signals feature test macro
7891 # This defines the POSIX feature test macro
7892 # that indicates that the POSIX real time signals
7895 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7896 # No options implement this inferface
7897 # This value cannot be modified here.
7900 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7901 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7904 # The following properties are affected by this value
7905 # interface CYGINT_POSIX_REALTIME_SIGNALS
7906 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7910 # Non-local jumps functionality
7912 cdl_component CYGPKG_ISO_SETJMP {
7913 # There is no associated value.
7917 # setjmp() / longjmp() implementations
7919 cdl_interface CYGINT_ISO_SETJMP {
7920 # No options implement this inferface
7921 # This value cannot be modified here.
7924 # Requires: 1 >= CYGINT_ISO_SETJMP
7925 # CYGINT_ISO_SETJMP == 0
7928 # The following properties are affected by this value
7929 # interface CYGINT_ISO_SETJMP
7930 # Requires: 1 >= CYGINT_ISO_SETJMP
7933 # setjmp() / longjmp() implementation header
7935 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7937 # No user value, uncomment the following line to provide one.
7939 # value_source default
7940 # Default value: 0 0
7943 # sigsetjmp() / siglongjmp() implementations
7945 cdl_interface CYGINT_ISO_SIGSETJMP {
7946 # No options implement this inferface
7947 # This value cannot be modified here.
7950 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7951 # CYGINT_ISO_SIGSETJMP == 0
7954 # The following properties are affected by this value
7955 # interface CYGINT_ISO_SIGSETJMP
7956 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7959 # sigsetjmp() / siglongjmp() implementation header
7961 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
7963 # No user value, uncomment the following line to provide one.
7965 # value_source default
7966 # Default value: 0 0
7970 # Assertions implementation header
7972 cdl_option CYGBLD_ISO_ASSERT_HEADER {
7974 # No user value, uncomment the following line to provide one.
7976 # value_source default
7977 # Default value: 0 0
7980 # POSIX file control
7981 # This covers the POSIX file control definitions,
7982 # normally found in <fcntl.h>
7984 cdl_component CYGPKG_ISO_POSIX_FCNTL {
7985 # There is no associated value.
7989 # POSIX open flags implementation header
7991 cdl_option CYGBLD_ISO_OFLAG_HEADER {
7993 # No user value, uncomment the following line to provide one.
7995 # value_source default
7996 # Default value: 0 0
7999 # POSIX fcntl() implementations
8001 cdl_interface CYGINT_ISO_FCNTL {
8002 # No options implement this inferface
8003 # This value cannot be modified here.
8006 # Requires: 1 >= CYGINT_ISO_FCNTL
8007 # CYGINT_ISO_FCNTL == 0
8010 # The following properties are affected by this value
8011 # interface CYGINT_ISO_FCNTL
8012 # Requires: 1 >= CYGINT_ISO_FCNTL
8015 # POSIX fcntl() implementation header
8017 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8019 # No user value, uncomment the following line to provide one.
8021 # value_source default
8022 # Default value: 0 0
8025 # POSIX file open implementations
8027 cdl_interface CYGINT_ISO_OPEN {
8028 # No options implement this inferface
8029 # This value cannot be modified here.
8032 # Requires: 1 >= CYGINT_ISO_OPEN
8033 # CYGINT_ISO_OPEN == 0
8036 # The following properties are affected by this value
8037 # interface CYGINT_ISO_OPEN
8038 # Requires: 1 >= CYGINT_ISO_OPEN
8041 # POSIX file open implementation header
8043 cdl_option CYGBLD_ISO_OPEN_HEADER {
8045 # No user value, uncomment the following line to provide one.
8047 # value_source default
8048 # Default value: 0 0
8052 # <sys/stat.h> definitions implementation header
8054 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8056 # No user value, uncomment the following line to provide one.
8058 # value_source default
8059 # Default value: 0 0
8062 # POSIX directory reading implementation
8064 cdl_interface CYGINT_ISO_DIRENT {
8065 # No options implement this inferface
8066 # This value cannot be modified here.
8069 # Requires: 1 >= CYGINT_ISO_DIRENT
8070 # CYGINT_ISO_DIRENT == 0
8073 # The following properties are affected by this value
8074 # interface CYGINT_ISO_DIRENT
8075 # Requires: 1 >= CYGINT_ISO_DIRENT
8078 # <dirent.h> definitions implementation header
8080 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8082 # No user value, uncomment the following line to provide one.
8084 # value_source default
8085 # Default value: 0 0
8088 # POSIX <sys/types.h> contents
8089 # This covers the types required by POSIX to be in
8092 cdl_component CYGPKG_ISO_POSIX_TYPES {
8093 # There is no associated value.
8097 # POSIX thread types implementations
8099 cdl_interface CYGINT_ISO_PTHREADTYPES {
8100 # No options implement this inferface
8101 # This value cannot be modified here.
8104 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8105 # CYGINT_ISO_PTHREADTYPES == 0
8108 # The following properties are affected by this value
8109 # interface CYGINT_ISO_PTHREADTYPES
8110 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8111 # interface CYGINT_ISO_PMUTEXTYPES
8112 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8115 # POSIX thread types implementation header
8117 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8119 # No user value, uncomment the following line to provide one.
8121 # value_source default
8122 # Default value: 0 0
8125 # POSIX mutex types implementations
8127 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8128 # No options implement this inferface
8129 # This value cannot be modified here.
8132 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8133 # CYGINT_ISO_PTHREADTYPES == 0
8137 # POSIX mutex types implementation header
8139 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8141 # No user value, uncomment the following line to provide one.
8143 # value_source default
8144 # Default value: 0 0
8147 # ssize_t implementation header
8149 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8151 # No user value, uncomment the following line to provide one.
8153 # value_source default
8154 # Default value: 0 0
8157 # Filesystem types implementation header
8159 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8161 # No user value, uncomment the following line to provide one.
8163 # value_source default
8164 # Default value: 0 0
8167 # gid_t, pid_t, uid_t implementation header
8169 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8171 # No user value, uncomment the following line to provide one.
8173 # value_source default
8174 # Default value: 0 0
8178 # Non-POSIX <sys/types.h> contents
8179 # This covers the extra types required by non-POSIX
8180 # packages to be in <sys/types.h>. These would normally
8181 # only be visible if _POSIX_SOURCE is not defined.
8183 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8184 # There is no associated value.
8188 # BSD compatible types
8190 cdl_interface CYGINT_ISO_BSDTYPES {
8191 # No options implement this inferface
8192 # This value cannot be modified here.
8195 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8196 # CYGINT_ISO_BSDTYPES == 0
8199 # The following properties are affected by this value
8200 # interface CYGINT_ISO_BSDTYPES
8201 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8206 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8208 # No user value, uncomment the following line to provide one.
8210 # value_source default
8211 # Default value: 0 0
8217 cdl_component CYGPKG_ISO_UTSNAME {
8218 # There is no associated value.
8224 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8226 # No user value, uncomment the following line to provide one.
8228 # value_source default
8229 # Default value: 0 0
8235 cdl_component CYGPKG_ISO_SCHED {
8236 # There is no associated value.
8240 # POSIX scheduler implementations
8242 cdl_interface CYGINT_ISO_SCHED_IMPL {
8243 # No options implement this inferface
8244 # This value cannot be modified here.
8247 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8248 # CYGINT_ISO_SCHED_IMPL == 0
8251 # The following properties are affected by this value
8252 # interface CYGINT_ISO_SCHED_IMPL
8253 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8256 # POSIX scheduler implementation header
8258 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8260 # No user value, uncomment the following line to provide one.
8262 # value_source default
8263 # Default value: 0 0
8269 cdl_component CYGPKG_ISO_SEMAPHORES {
8270 # There is no associated value.
8274 # POSIX semaphore implementations
8276 cdl_interface CYGINT_ISO_SEMAPHORES {
8277 # No options implement this inferface
8278 # This value cannot be modified here.
8281 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8282 # CYGINT_ISO_SEMAPHORES == 0
8285 # The following properties are affected by this value
8286 # interface CYGINT_ISO_SEMAPHORES
8287 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8290 # POSIX semaphore implementation header
8292 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8294 # No user value, uncomment the following line to provide one.
8296 # value_source default
8297 # Default value: 0 0
8301 # POSIX message queues
8303 cdl_component CYGPKG_ISO_MQUEUE {
8304 # There is no associated value.
8310 cdl_interface CYGINT_ISO_MQUEUE {
8311 # No options implement this inferface
8312 # This value cannot be modified here.
8315 # Requires: 1 >= CYGINT_ISO_MQUEUE
8316 # CYGINT_ISO_MQUEUE == 0
8319 # The following properties are affected by this value
8320 # interface CYGINT_ISO_MQUEUE
8321 # Requires: 1 >= CYGINT_ISO_MQUEUE
8322 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8323 # ActiveIf: CYGINT_ISO_MQUEUE
8324 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8325 # ActiveIf: CYGINT_ISO_MQUEUE
8328 # Implementation header
8330 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8332 # No user value, uncomment the following line to provide one.
8334 # value_source default
8335 # Default value: 0 0
8338 # Maximum number of open message queues
8340 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8341 # This option is not active
8342 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8343 # CYGINT_ISO_MQUEUE == 0
8347 # No user value, uncomment the following line to provide one.
8349 # value_source default
8350 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8351 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8352 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8356 # Maximum number of message priorities
8358 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8359 # This option is not active
8360 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8361 # CYGINT_ISO_MQUEUE == 0
8365 # No user value, uncomment the following line to provide one.
8366 # user_value 1 65535
8367 # value_source default
8368 # Default value: 1 65535
8374 cdl_component CYGPKG_ISO_PTHREAD {
8375 # There is no associated value.
8379 # POSIX pthread implementations
8381 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8382 # No options implement this inferface
8383 # This value cannot be modified here.
8385 # Current value: 0 0
8386 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8387 # CYGINT_ISO_PTHREAD_IMPL == 0
8390 # The following properties are affected by this value
8391 # interface CYGINT_ISO_PTHREAD_IMPL
8392 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8395 # POSIX pthread implementation header
8397 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8399 # No user value, uncomment the following line to provide one.
8401 # value_source default
8402 # Default value: 0 0
8405 # POSIX mutex/cond var implementations
8407 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8408 # No options implement this inferface
8409 # This value cannot be modified here.
8411 # Current value: 0 0
8412 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8413 # CYGINT_ISO_PTHREAD_MUTEX == 0
8416 # The following properties are affected by this value
8417 # interface CYGINT_ISO_PTHREAD_MUTEX
8418 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8421 # POSIX mutex/cond var implementation header
8423 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8425 # No user value, uncomment the following line to provide one.
8427 # value_source default
8428 # Default value: 0 0
8434 cdl_component CYGPKG_ISO_LIMITS {
8435 # There is no associated value.
8439 # POSIX pthread limits implementations
8441 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8442 # No options implement this inferface
8443 # This value cannot be modified here.
8446 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8447 # CYGINT_ISO_POSIX_LIMITS == 0
8450 # The following properties are affected by this value
8451 # interface CYGINT_ISO_POSIX_LIMITS
8452 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8455 # POSIX pthread limits implementation header
8457 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8459 # No user value, uncomment the following line to provide one.
8461 # value_source default
8462 # Default value: 0 0
8465 # OPEN_MAX implementation header
8467 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8469 # No user value, uncomment the following line to provide one.
8471 # value_source default
8472 # Default value: 0 0
8475 # LINK_MAX implementation header
8477 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8479 # No user value, uncomment the following line to provide one.
8481 # value_source default
8482 # Default value: 0 0
8485 # NAME_MAX implementation header
8487 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8489 # No user value, uncomment the following line to provide one.
8491 # value_source default
8492 # Default value: 0 0
8495 # PATH_MAX implementation header
8497 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8499 # No user value, uncomment the following line to provide one.
8501 # value_source default
8502 # Default value: 0 0
8508 cdl_component CYGPKG_ISO_TERMIOS {
8509 # There is no associated value.
8513 # POSIX termios implementations
8515 cdl_interface CYGINT_ISO_TERMIOS {
8516 # No options implement this inferface
8517 # This value cannot be modified here.
8520 # Requires: 1 >= CYGINT_ISO_TERMIOS
8521 # CYGINT_ISO_TERMIOS == 0
8524 # The following properties are affected by this value
8525 # interface CYGINT_ISO_TERMIOS
8526 # Requires: 1 >= CYGINT_ISO_TERMIOS
8529 # POSIX termios implementation header
8531 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8533 # No user value, uncomment the following line to provide one.
8535 # value_source default
8536 # Default value: 0 0
8542 cdl_component CYGPKG_ISO_DLFCN {
8543 # There is no associated value.
8547 # Dynamic load implementations
8549 cdl_interface CYGINT_ISO_DLFCN {
8550 # No options implement this inferface
8551 # This value cannot be modified here.
8554 # Requires: 1 >= CYGINT_ISO_DLFCN
8555 # CYGINT_ISO_DLFCN == 0
8558 # The following properties are affected by this value
8559 # interface CYGINT_ISO_DLFCN
8560 # Requires: 1 >= CYGINT_ISO_DLFCN
8563 # Dynamic load implementation header
8565 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8567 # No user value, uncomment the following line to provide one.
8569 # value_source default
8570 # Default value: 0 0
8574 # UNIX standard functions
8576 cdl_component CYGPKG_ISO_UNISTD {
8577 # There is no associated value.
8581 # POSIX timer operations implementations
8583 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8584 # No options implement this inferface
8585 # This value cannot be modified here.
8587 # Current value: 0 0
8588 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8589 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8592 # The following properties are affected by this value
8593 # interface CYGINT_ISO_POSIX_TIMER_OPS
8594 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8597 # POSIX timer operations implementation header
8599 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8601 # No user value, uncomment the following line to provide one.
8603 # value_source default
8604 # Default value: 0 0
8607 # POSIX sleep() implementations
8609 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8610 # No options implement this inferface
8611 # This value cannot be modified here.
8613 # Current value: 0 0
8614 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8615 # CYGINT_ISO_POSIX_SLEEP == 0
8618 # The following properties are affected by this value
8619 # interface CYGINT_ISO_POSIX_SLEEP
8620 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8623 # POSIX sleep() implementation header
8625 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8627 # No user value, uncomment the following line to provide one.
8629 # value_source default
8630 # Default value: 0 0
8634 # select()/poll() functions
8636 cdl_component CYGPKG_ISO_SELECT {
8637 # There is no associated value.
8641 # select() implementations
8643 cdl_interface CYGINT_ISO_SELECT {
8644 # No options implement this inferface
8645 # This value cannot be modified here.
8647 # Current value: 0 0
8648 # Requires: 1 >= CYGINT_ISO_SELECT
8649 # CYGINT_ISO_SELECT == 0
8652 # The following properties are affected by this value
8653 # interface CYGINT_ISO_SELECT
8654 # Requires: 1 >= CYGINT_ISO_SELECT
8657 # select() implementation header
8659 cdl_option CYGBLD_ISO_SELECT_HEADER {
8661 # No user value, uncomment the following line to provide one.
8663 # value_source default
8664 # Default value: 0 0
8667 # poll() implementations
8669 cdl_interface CYGINT_ISO_POLL {
8670 # No options implement this inferface
8671 # This value cannot be modified here.
8673 # Current value: 0 0
8674 # Requires: 1 >= CYGINT_ISO_POLL
8675 # CYGINT_ISO_POLL == 0
8678 # The following properties are affected by this value
8679 # interface CYGINT_ISO_POLL
8680 # Requires: 1 >= CYGINT_ISO_POLL
8683 # poll() implementation header
8685 cdl_option CYGBLD_ISO_POLL_HEADER {
8687 # No user value, uncomment the following line to provide one.
8689 # value_source default
8690 # Default value: 0 0
8694 # NetDB utility functions
8696 cdl_component CYGPKG_ISO_NETDB {
8697 # There is no associated value.
8701 # DNS implementations
8703 cdl_interface CYGINT_ISO_DNS {
8704 # No options implement this inferface
8705 # This value cannot be modified here.
8708 # Requires: 1 >= CYGINT_ISO_DNS
8709 # CYGINT_ISO_DNS == 0
8712 # The following properties are affected by this value
8713 # interface CYGINT_ISO_DNS
8714 # Requires: 1 >= CYGINT_ISO_DNS
8717 # DNS implementation header
8719 cdl_option CYGBLD_ISO_DNS_HEADER {
8721 # No user value, uncomment the following line to provide one.
8723 # value_source default
8724 # Default value: 0 0
8727 # Protocol network database implementations
8729 cdl_interface CYGINT_ISO_NETDB_PROTO {
8730 # No options implement this inferface
8731 # This value cannot be modified here.
8734 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8735 # CYGINT_ISO_NETDB_PROTO == 0
8738 # The following properties are affected by this value
8739 # interface CYGINT_ISO_NETDB_PROTO
8740 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8743 # Protocol network database implementation header
8745 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8747 # No user value, uncomment the following line to provide one.
8749 # value_source default
8750 # Default value: 0 0
8753 # Services network database implementations
8755 cdl_interface CYGINT_ISO_NETDB_SERV {
8756 # No options implement this inferface
8757 # This value cannot be modified here.
8760 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8761 # CYGINT_ISO_NETDB_SERV == 0
8764 # The following properties are affected by this value
8765 # interface CYGINT_ISO_NETDB_SERV
8766 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8769 # Services network database implementation header
8771 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8773 # No user value, uncomment the following line to provide one.
8775 # value_source default
8776 # Default value: 0 0
8781 # Package specific build options including control over
8782 # compiler flags used only in building this package,
8783 # and details of which tests are built.
8785 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8786 # There is no associated value.
8790 # Additional compiler flags
8791 # This option modifies the set of compiler flags for
8792 # building the ISO C and POSIX infrastructure package.
8793 # These flags are used in addition to the set of global flags.
8795 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8797 # No user value, uncomment the following line to provide one.
8799 # value_source default
8803 # Suppressed compiler flags
8804 # This option modifies the set of compiler flags for
8805 # building the ISO C and POSIX infrastructure package.
8806 # These flags are removed from the set of global flags
8809 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8811 # No user value, uncomment the following line to provide one.
8813 # value_source default
8820 # doc: ref/services-crc.html
8821 # This package provides support for CRC calculation. Currently
8822 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8823 # Gary S. Brown, and a 16 bit CRC.
8825 cdl_package CYGPKG_CRC {
8826 # Packages cannot be added or removed, nor can their version be changed,
8827 # simply by editing their value. Instead the appropriate configuration
8828 # should be used to perform these actions.
8830 # This value cannot be modified here.
8832 # Current value: 1 current
8834 # The following properties are affected by this value
8835 # package CYGPKG_COMPRESS_ZLIB
8836 # Requires: CYGPKG_CRC
8842 cdl_option CYGPKG_CRC_TESTS {
8843 # Calculated value: "tests/crc_test"
8845 # Current_value: tests/crc_test
8849 # Zlib compress and decompress package
8850 # This package provides support for compression and
8853 cdl_package CYGPKG_COMPRESS_ZLIB {
8854 # Packages cannot be added or removed, nor can their version be changed,
8855 # simply by editing their value. Instead the appropriate configuration
8856 # should be used to perform these actions.
8858 # This value cannot be modified here.
8860 # Current value: 1 current
8861 # Requires: CYGPKG_ISOINFRA
8862 # CYGPKG_ISOINFRA == current
8864 # Requires: CYGPKG_CRC
8865 # CYGPKG_CRC == current
8868 # The following properties are affected by this value
8869 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8870 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8874 # Override memory allocation routines.
8876 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8877 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8878 # This value cannot be modified here.
8882 # The following properties are affected by this value
8883 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8884 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8887 # Should deflate() produce 'gzip' compatible output?
8888 # If this option is set then the output of calling deflate()
8889 # will be wrapped up as a 'gzip' compatible file.
8891 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8893 # No user value, uncomment the following line to provide one.
8895 # value_source default
8899 # Does this library need malloc?
8900 # This pseudo-option will force the memalloc library to be
8901 # required iff the application does not provide it's own
8904 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8905 # This option is not active
8906 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8907 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8911 # No user value, uncomment the following line to provide one.
8913 # value_source default
8915 # Requires: CYGPKG_MEMALLOC
8916 # CYGPKG_MEMALLOC == current
8920 # Include stdio-like utility functions
8921 # This option enables the stdio-like zlib utility functions
8922 # (gzread/gzwrite and friends) provided in gzio.c.
8924 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8926 # No user value, uncomment the following line to provide one.
8928 # value_source default
8929 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8930 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8932 # Requires: CYGINT_ISO_STDIO_FILEPOS
8933 # CYGINT_ISO_STDIO_FILEPOS == 0
8935 # Requires: CYGINT_ISO_STRING_STRFUNCS
8936 # CYGINT_ISO_STRING_STRFUNCS == 1
8938 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8939 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8941 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8942 # CYGINT_ISO_STDIO_FILEACCESS == 0
8946 # Zlib compress and decompress package build options
8947 # Package specific build options including control over
8948 # compiler flags used only in building this package,
8949 # and details of which tests are built.
8951 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8952 # There is no associated value.
8956 # Additional compiler flags
8957 # This option modifies the set of compiler flags for
8958 # building this package. These flags are used in addition
8959 # to the set of global flags.
8961 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
8963 # No user value, uncomment the following line to provide one.
8964 # user_value "-D__ECOS__ -DNO_ERRNO_H"
8965 # value_source default
8966 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
8969 # Suppressed compiler flags
8970 # This option modifies the set of compiler flags for
8971 # building this package. These flags are removed from
8972 # the set of global flags if present.
8974 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
8976 # No user value, uncomment the following line to provide one.
8977 # user_value -Wstrict-prototypes
8978 # value_source default
8979 # Default value: -Wstrict-prototypes
8982 # Additional compiler flags
8983 # This option modifies the set of compiler flags for
8984 # building this package. These flags are used in addition
8985 # to the set of global flags.
8987 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
8989 # No user value, uncomment the following line to provide one.
8991 # value_source default
8995 # Suppressed compiler flags
8996 # This option modifies the set of compiler flags for
8997 # building this package. These flags are removed from
8998 # the set of global flags if present.
9000 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9002 # No user value, uncomment the following line to provide one.
9004 # value_source default
9011 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9012 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9014 # Current_value: tests/zlib1.c tests/zlib2.c
9018 # FLASH device drivers
9019 # doc: ref/flash.html
9020 # This option enables drivers for basic I/O services on
9023 cdl_package CYGPKG_IO_FLASH {
9024 # Packages cannot be added or removed, nor can their version be changed,
9025 # simply by editing their value. Instead the appropriate configuration
9026 # should be used to perform these actions.
9028 # This value cannot be modified here.
9030 # Current value: 1 current
9031 # Requires: CYGPKG_ISOINFRA
9032 # CYGPKG_ISOINFRA == current
9034 # Requires: CYGINT_ISO_STRING_STRFUNCS
9035 # CYGINT_ISO_STRING_STRFUNCS == 1
9038 # The following properties are affected by this value
9039 # component CYGSEM_REDBOOT_FLASH_CONFIG
9040 # DefaultValue: CYGPKG_IO_FLASH != 0
9041 # package CYGPKG_DEVS_FLASH_ONMXC
9042 # ActiveIf: CYGPKG_IO_FLASH
9046 # Hardware FLASH device drivers
9047 # This option enables the hardware device drivers
9048 # for the current platform.
9050 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9051 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9052 # This value cannot be modified here.
9056 # The following properties are affected by this value
9057 # component CYGPKG_REDBOOT_FLASH
9058 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9061 # Hardware FLASH device drivers are not in RAM
9062 # Use of this interface is deprecated.
9063 # Drivers should make sure that the functions are
9064 # linked to RAM by putting them in .2ram sections.
9066 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9067 # No options implement this inferface
9068 # This value cannot be modified here.
9070 # Current value: 0 0
9071 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9072 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9075 # The following properties are affected by this value
9076 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9077 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9080 # Hardware can support block locking
9081 # This option will be enabled by devices which can support
9082 # locking (write-protection) of individual blocks.
9084 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9085 # No options implement this inferface
9086 # This value cannot be modified here.
9088 # Current value: 0 0
9090 # The following properties are affected by this value
9091 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9092 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9095 # Hardware cannot support direct access to FLASH memory
9096 # This option will be asserted by devices which cannot support
9097 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9098 # devices). In these cases, the driver must provide an appropriate
9099 # hardware access function.
9101 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9103 # No user value, uncomment the following line to provide one.
9105 # The inferred value should not be edited directly.
9107 # value_source inferred
9109 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9110 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9113 # The following properties are affected by this value
9114 # option CYGPRI_REDBOOT_ZLIB_FLASH
9115 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9116 # component CYGHWR_DEVS_FLASH_MMC
9117 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9118 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9119 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9120 # option CYGHWR_DEVS_FLASH_MMC_SD
9121 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9122 # option CYGHWR_DEVS_FLASH_MXC_NAND
9123 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9126 # Display status messages during flash operations
9127 # Selecting this option will cause the drivers to print status
9128 # messages as various flash operations are undertaken.
9130 cdl_option CYGSEM_IO_FLASH_CHATTER {
9132 # No user value, uncomment the following line to provide one.
9134 # value_source default
9138 # Verify data programmed to flash
9139 # Selecting this option will cause verification of data
9140 # programmed to flash.
9142 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9144 # No user value, uncomment the following line to provide one.
9146 # The inferred value should not be edited directly.
9148 # value_source inferred
9151 # The following properties are affected by this value
9152 # option CYGSEM_IO_FLASH_READ_INDIRECT
9153 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9156 # Platform has flash soft DIP switch write-protect
9157 # Selecting this option will cause the state of a hardware jumper or
9158 # dipswitch to be read by software to determine whether the flash is
9159 # write-protected or not.
9161 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9163 # No user value, uncomment the following line to provide one.
9165 # value_source default
9169 # Instantiate in I/O block device API
9170 # Provides a block device accessible using the standard I/O
9171 # API ( cyg_io_read() etc. )
9173 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9174 # This option is not active
9175 # ActiveIf constraint: CYGPKG_IO
9176 # CYGPKG_IO (unknown) == 0
9180 # No user value, uncomment the following line to provide one.
9182 # value_source default
9187 # Name of flash device 1 block device
9189 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9190 # This option is not active
9191 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9192 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9195 # No user value, uncomment the following line to provide one.
9196 # user_value "\"/dev/flash1\""
9197 # value_source default
9198 # Default value: "\"/dev/flash1\""
9203 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9204 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9205 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9206 # This option is not active
9207 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9209 # This value cannot be modified here.
9212 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9213 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9216 # The following properties are affected by this value
9217 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9218 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9221 # Static configuration
9222 # This configures the flash device 1 block device
9223 # with static base and length
9225 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9226 # This option is not active
9227 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9230 # No user value, uncomment the following line to provide one.
9232 # value_source default
9237 # Start offset from flash base
9238 # This gives the offset from the base of flash which this
9239 # block device corresponds to.
9241 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9242 # This option is not active
9243 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9246 # No user value, uncomment the following line to provide one.
9247 # user_value 0x00100000
9248 # value_source default
9249 # Default value: 0x00100000
9253 # This gives the length of the region of flash given over
9254 # to this block device.
9256 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9257 # This option is not active
9258 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9261 # No user value, uncomment the following line to provide one.
9262 # user_value 0x00100000
9263 # value_source default
9264 # Default value: 0x00100000
9268 # Configuration from FIS
9269 # This configures the flash device 1 block device
9272 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9273 # This option is not active
9274 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9277 # No user value, uncomment the following line to provide one.
9279 # value_source default
9286 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9287 # This option is not active
9288 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9289 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9292 # No user value, uncomment the following line to provide one.
9293 # user_value "\"jffs2\""
9294 # value_source default
9295 # Default value: "\"jffs2\""
9301 # Flash device driver build options
9302 # Package specific build options including control over
9303 # compiler flags used only in building this package,
9304 # and details of which tests are built.
9306 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9307 # There is no associated value.
9311 # Additional compiler flags
9312 # This option modifies the set of compiler flags for
9313 # building the flash device drivers. These flags are used in addition
9314 # to the set of global flags.
9316 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9318 # No user value, uncomment the following line to provide one.
9320 # value_source default
9324 # Suppressed compiler flags
9325 # This option modifies the set of compiler flags for
9326 # building the flash device drivers. These flags are removed from
9327 # the set of global flags if present.
9329 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9331 # No user value, uncomment the following line to provide one.
9333 # value_source default
9337 # Flash device driver tests
9338 # This option specifies the set of tests for the flash device drivers.
9340 cdl_component CYGPKG_IO_FLASH_TESTS {
9341 # Calculated value: "tests/flash1"
9343 # Current_value: tests/flash1
9347 # Start offset from flash base
9348 # This gives the offset from the base of flash where tests
9349 # can be run. It is important to set this correctly, as an
9350 # incorrect value could allow the tests to write over critical
9351 # portions of the FLASH device and possibly render the target
9352 # board totally non-functional.
9354 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9356 # No user value, uncomment the following line to provide one.
9357 # user_value 0x00100000
9358 # value_source default
9359 # Default value: 0x00100000
9363 # This gives the length of the region of flash used for testing.
9365 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9367 # No user value, uncomment the following line to provide one.
9368 # user_value 0x00100000
9369 # value_source default
9370 # Default value: 0x00100000
9375 # Support FLASH memory on Freescale MXC platforms
9377 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9378 # Packages cannot be added or removed, nor can their version be changed,
9379 # simply by editing their value. Instead the appropriate configuration
9380 # should be used to perform these actions.
9382 # ActiveIf constraint: CYGPKG_IO_FLASH
9383 # CYGPKG_IO_FLASH == current
9386 # This value cannot be modified here.
9388 # Current value: 1 current
9392 # MXC platform MMC card support
9393 # When this option is enabled, it indicates MMC card is
9394 # supported on the MXC platforms
9396 cdl_component CYGHWR_DEVS_FLASH_MMC {
9398 # No user value, uncomment the following line to provide one.
9400 # value_source default
9402 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9403 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9406 # The following properties are affected by this value
9407 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9408 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9409 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9410 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9411 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9412 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9413 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9414 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9418 # MXC platform MMC card for newer SDHC controllers
9420 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9421 # This option is not active
9422 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9423 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
9424 # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0
9425 # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0
9426 # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0
9427 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9431 # No user value, uncomment the following line to provide one.
9433 # value_source default
9435 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9436 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9440 # MXC platform MMC card for older MMC/SD controllers
9442 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9443 # This option is not active
9444 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9445 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9446 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9447 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9451 # No user value, uncomment the following line to provide one.
9453 # value_source default
9455 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9456 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9461 # MXC platform NOR flash memory support
9462 # When this option is enabled, it indicates NOR flash is
9463 # supported on the MXC platforms
9465 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9467 # No user value, uncomment the following line to provide one.
9469 # The inferred value should not be edited directly.
9471 # value_source inferred
9474 # The following properties are affected by this value
9475 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9476 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9477 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9478 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9479 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9480 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9481 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9482 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9483 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9484 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9487 # MXC platform NAND flash memory support
9488 # When this option is enabled, it indicates NAND flash is
9489 # supported on the MXC platforms
9491 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9493 # No user value, uncomment the following line to provide one.
9495 # The inferred value should not be edited directly.
9497 # value_source inferred
9499 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9500 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9503 # The following properties are affected by this value
9504 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9505 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9506 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9507 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9508 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9509 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9510 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9511 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9512 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9513 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9514 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9515 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9518 # i.MX platform SPI NOR flash memory support
9519 # When this option is enabled, it indicates SPI NOR flash is
9520 # supported on the i.MX platforms
9522 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9524 # No user value, uncomment the following line to provide one.
9526 # value_source default
9528 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9529 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9533 # MXC platform ATA support
9534 # When this option is enabled, it indicates ATA is
9535 # supported on the MXC platforms
9537 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9539 # No user value, uncomment the following line to provide one.
9541 # value_source default
9545 # Use a flash based Bad Block Table
9547 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9548 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9549 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9552 # There is no associated value.
9556 # When this option is enabled, the driver will search for a flash
9557 # based bad block table
9559 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9561 # No user value, uncomment the following line to provide one.
9563 # value_source default
9567 # header file defining the NAND BBT descriptor
9568 # defines the name of the header file that describes the BBT layout
9570 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9572 # No user value, uncomment the following line to provide one.
9574 # The inferred value should not be edited directly.
9575 inferred_value 1 <cyg/io/tx37_nand_bbt.h>
9576 # value_source inferred
9577 # Default value: 0 0
9580 # Number of blocks to reserve for BBT
9581 # Number of blocks to reserve for BBT
9583 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9585 # No user value, uncomment the following line to provide one.
9587 # value_source default
9592 # MXC platform multi flash memory support
9593 # When this option is enabled, it indicates multi flashes are
9594 # supported on the MXC platforms (like NAND and NOR)
9596 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9597 # This option is not active
9598 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9599 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9600 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9601 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9602 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9603 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9604 # CYGHWR_DEVS_FLASH_MMC == 0
9605 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9606 # CYGHWR_DEVS_FLASH_MMC == 0
9610 # No user value, uncomment the following line to provide one.
9612 # The inferred value should not be edited directly.
9614 # value_source inferred
9618 # MXC platform NAND flash reset workaround support
9619 # When this option is enabled, it indicates 0xFFFF is used for
9620 # the NAND reset command instead of 0xFF.
9622 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9623 # No options implement this inferface
9624 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9625 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9628 # This value cannot be modified here.
9635 # Dynamic memory allocation
9636 # doc: ref/memalloc.html
9637 # This package provides memory allocator infrastructure required for
9638 # dynamic memory allocators, including the ISO standard malloc
9639 # interface. It also contains some sample implementations.
9641 cdl_package CYGPKG_MEMALLOC {
9642 # Packages cannot be added or removed, nor can their version be changed,
9643 # simply by editing their value. Instead the appropriate configuration
9644 # should be used to perform these actions.
9646 # This value cannot be modified here.
9648 # Current value: 1 current
9650 # The following properties are affected by this value
9651 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9652 # Requires: CYGPKG_MEMALLOC
9656 # Memory allocator implementations
9657 # This component contains configuration options related to the
9658 # various memory allocators available.
9660 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9661 # There is no associated value.
9665 # Fixed block allocator
9666 # This component contains configuration options related to the
9667 # fixed block memory allocator.
9669 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9670 # There is no associated value.
9675 # With this option enabled, this allocator will be
9676 # made thread-safe. Additionally allocation functions
9677 # are made available that allow a thread to wait
9678 # until memory is available.
9680 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9681 # This option is not active
9682 # ActiveIf constraint: CYGPKG_KERNEL
9683 # CYGPKG_KERNEL (unknown) == 0
9687 # No user value, uncomment the following line to provide one.
9689 # value_source default
9694 # Simple variable block allocator
9695 # This component contains configuration options related to the
9696 # simple variable block memory allocator. This allocator is not
9697 # very fast, and in particular does not scale well with large
9698 # numbers of allocations. It is however very compact in terms of
9699 # code size and does not have very much overhead per allocation.
9701 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9702 # There is no associated value.
9707 # With this option enabled, this allocator will be
9708 # made thread-safe. Additionally allocation functions
9709 # are added that allow a thread to wait until memory
9710 # are made available that allow a thread to wait
9711 # until memory is available.
9713 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9714 # This option is not active
9715 # ActiveIf constraint: CYGPKG_KERNEL
9716 # CYGPKG_KERNEL (unknown) == 0
9720 # No user value, uncomment the following line to provide one.
9722 # value_source default
9727 # The variable-block memory allocator can perform coalescing
9728 # of memory whenever the application code releases memory back
9729 # to the pool. This coalescing reduces the possibility of
9730 # memory fragmentation problems, but involves extra code and
9733 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9735 # No user value, uncomment the following line to provide one.
9737 # value_source default
9740 # The following properties are affected by this value
9741 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9742 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9747 # This component contains configuration options related to the
9748 # port of Doug Lea's memory allocator, normally known as
9749 # dlmalloc. dlmalloc has a reputation for being both fast
9750 # and space-conserving, as well as resisting fragmentation well.
9751 # It is a common choice for a general purpose allocator and
9752 # has been used in both newlib and Linux glibc.
9754 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9755 # There is no associated value.
9760 # Doug Lea's malloc implementation has substantial amounts
9761 # of internal checking in order to verify the operation
9762 # and consistency of the allocator. However this imposes
9763 # substantial overhead on each operation. Therefore this
9764 # checking may be individually disabled.
9766 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9768 # No user value, uncomment the following line to provide one.
9770 # value_source default
9771 # Default value: 0 != CYGDBG_USE_ASSERTS
9772 # CYGDBG_USE_ASSERTS == 0
9774 # Requires: CYGDBG_USE_ASSERTS
9775 # CYGDBG_USE_ASSERTS == 0
9780 # With this option enabled, this allocator will be
9781 # made thread-safe. Additionally allocation functions
9782 # are made available that allow a thread to wait
9783 # until memory is available.
9785 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9786 # This option is not active
9787 # ActiveIf constraint: CYGPKG_KERNEL
9788 # CYGPKG_KERNEL (unknown) == 0
9792 # No user value, uncomment the following line to provide one.
9794 # value_source default
9796 # Requires: CYGPKG_KERNEL
9797 # CYGPKG_KERNEL (unknown) == 0
9801 # Support more than one instance
9802 # Having this option disabled allows important
9803 # implementation structures to be declared as a single
9804 # static instance, allowing faster access. However this
9805 # would fail if there is more than one instance of
9806 # the dlmalloc allocator class. Therefore this option can
9807 # be enabled if multiple instances are required. Note: as
9808 # a special case, if this allocator is used as the
9809 # implementation of malloc, and it can be determined there
9810 # is more than one malloc pool, then this option will be
9813 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9815 # No user value, uncomment the following line to provide one.
9817 # value_source default
9821 # Use system memmove() and memset()
9822 # This may be used to control whether memset() and memmove()
9823 # are used within the implementation. The alternative is
9824 # to use some macro equivalents, which some people report
9825 # are faster in some circumstances.
9827 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9829 # No user value, uncomment the following line to provide one.
9831 # value_source default
9832 # Default value: 0 != CYGPKG_ISOINFRA
9833 # CYGPKG_ISOINFRA == current
9835 # Requires: CYGPKG_ISOINFRA
9836 # CYGPKG_ISOINFRA == current
9840 # Minimum alignment of allocated blocks
9841 # This option controls the minimum alignment that the
9842 # allocated memory blocks are aligned on, specified as
9843 # 2^N. Note that using large mininum alignments can lead
9844 # to excessive memory wastage.
9846 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9848 # No user value, uncomment the following line to provide one.
9850 # value_source default
9852 # Legal values: 3 to 10
9856 # Variable block allocator with separate metadata
9857 # This component contains configuration options related to the
9858 # variable block memory allocator with separate metadata.
9860 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9861 # There is no associated value.
9866 # With this option enabled, this allocator will be
9867 # made thread-safe. Additionally allocation functions
9868 # are made available that allow a thread to wait
9869 # until memory is available.
9871 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9872 # This option is not active
9873 # ActiveIf constraint: CYGPKG_KERNEL
9874 # CYGPKG_KERNEL (unknown) == 0
9878 # No user value, uncomment the following line to provide one.
9880 # value_source default
9886 # Kernel C API support for memory allocation
9887 # This option must be enabled to provide the extensions required
9888 # to support integration into the kernel C API.
9890 cdl_option CYGFUN_MEMALLOC_KAPI {
9891 # This option is not active
9892 # ActiveIf constraint: CYGPKG_KERNEL
9893 # CYGPKG_KERNEL (unknown) == 0
9897 # No user value, uncomment the following line to provide one.
9899 # value_source default
9900 # Default value: CYGFUN_KERNEL_API_C
9901 # CYGFUN_KERNEL_API_C (unknown) == 0
9905 # malloc(0) returns NULL
9906 # This option controls the behavior of malloc(0) ( or calloc with
9907 # either argument 0 ). It is permitted by the standard to return
9908 # either a NULL pointer or a unique pointer. Enabling this option
9909 # forces a NULL pointer to be returned.
9911 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9913 # No user value, uncomment the following line to provide one.
9915 # value_source default
9919 # Breakpoint site when running out of memory
9920 # Whenever the system runs out of memory, it invokes this function
9921 # before either going to sleep waiting for memory to become
9922 # available or returning failure.
9924 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9926 # No user value, uncomment the following line to provide one.
9928 # value_source default
9932 # malloc() and supporting allocators
9933 # This component enables support for dynamic memory
9934 # allocation as supplied by the functions malloc(),
9935 # free(), calloc() and realloc(). As these
9936 # functions are often used, but can have quite an
9937 # overhead, disabling them here can ensure they
9938 # cannot even be used accidentally when static
9939 # allocation is preferred. Within this component are
9940 # various allocators that can be selected for use
9941 # as the underlying implementation of the dynamic
9942 # allocation functions.
9944 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9945 # ActiveIf constraint: CYGPKG_ISOINFRA
9946 # CYGPKG_ISOINFRA == current
9950 # No user value, uncomment the following line to provide one.
9952 # value_source default
9957 # Use external heap definition
9958 # This option allows other components in the
9959 # system to override the default system
9960 # provision of heap memory pools. This should
9961 # be set to a header which provides the equivalent
9962 # definitions to <pkgconf/heaps.hxx>.
9964 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
9966 # No user value, uncomment the following line to provide one.
9968 # value_source default
9969 # Default value: 0 0
9972 # Use external implementation of joining multiple heaps
9973 # The default implementation of joining multiple heaps
9974 # is fine for the case where there are multiple disjoint
9975 # memory regions of the same type. However, in a system
9976 # there might be e.g. a small amount of internal SRAM and
9977 # a large amount of external DRAM. The SRAM is faster and
9978 # the DRAM is slower. An application can implement some
9979 # heuristic to choose which pool to allocate from. This
9980 # heuristic can be highly application specific.
9982 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
9984 # No user value, uncomment the following line to provide one.
9986 # value_source default
9987 # Default value: 0 0
9990 # malloc() allocator implementations
9992 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
9993 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
9994 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
9995 # This value cannot be modified here.
9998 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
9999 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10002 # The following properties are affected by this value
10003 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10004 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10007 # malloc() implementation instantiation data
10008 # Memory allocator implementations that are capable of being
10009 # used underneath malloc() must be instantiated. The code
10010 # to do this is set in this option. It is only intended to
10011 # be set by the implementation, not the user.
10013 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10015 # No user value, uncomment the following line to provide one.
10016 # user_value <cyg/memalloc/dlmalloc.hxx>
10017 # value_source default
10018 # Default value: <cyg/memalloc/dlmalloc.hxx>
10020 # The following properties are affected by this value
10021 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10022 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10023 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10024 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10027 # Simple variable block implementation
10028 # This causes malloc() to use the simple
10029 # variable block allocator.
10031 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10033 # No user value, uncomment the following line to provide one.
10035 # value_source default
10037 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10038 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10040 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10041 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10045 # Doug Lea's malloc implementation
10046 # This causes malloc() to use a version of Doug Lea's
10047 # malloc (dlmalloc) as the underlying implementation.
10049 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10051 # No user value, uncomment the following line to provide one.
10053 # value_source default
10055 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10056 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10061 # Size of the fallback dynamic memory pool in bytes
10062 # If *no* heaps are configured in your memory layout,
10063 # dynamic memory allocation by
10064 # malloc() and calloc() must be from a fixed-size,
10065 # contiguous memory pool (note here that it is the
10066 # pool that is of a fixed size, but malloc() is still
10067 # able to allocate variable sized chunks of memory
10068 # from it). This option is the size
10069 # of that pool, in bytes. Note that not all of
10070 # this is available for programs to
10071 # use - some is needed for internal information
10072 # about memory regions, and some may be lost to
10073 # ensure that memory allocation only returns
10074 # memory aligned on word (or double word)
10075 # boundaries - a very common architecture
10078 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10080 # No user value, uncomment the following line to provide one.
10082 # value_source default
10083 # Default value: 16384
10084 # Legal values: 32 to 0x7fffffff
10087 # Common memory allocator package build options
10088 # Package specific build options including control over
10089 # compiler flags used only in building this package,
10090 # and details of which tests are built.
10092 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10093 # There is no associated value.
10097 # Additional compiler flags
10098 # This option modifies the set of compiler flags for
10099 # building this package. These flags are used in addition
10100 # to the set of global flags.
10102 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10104 # No user value, uncomment the following line to provide one.
10105 # user_value "-fno-rtti -Woverloaded-virtual"
10106 # value_source default
10107 # Default value: "-fno-rtti -Woverloaded-virtual"
10110 # Suppressed compiler flags
10111 # This option modifies the set of compiler flags for
10112 # building this package. These flags are removed from
10113 # the set of global flags if present.
10115 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10117 # No user value, uncomment the following line to provide one.
10118 # user_value -Wno-pointer-sign
10119 # value_source default
10120 # Default value: -Wno-pointer-sign
10124 # This option specifies the set of tests for this package.
10126 cdl_option CYGPKG_MEMALLOC_TESTS {
10127 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10129 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10134 # Common error code support
10135 # This package contains the common list of error and
10136 # status codes. It is held centrally to allow
10137 # packages to interchange error codes and status
10138 # codes in a common way, rather than each package
10139 # having its own conventions for error/status
10140 # reporting. The error codes are modelled on the
10141 # POSIX style naming e.g. EINVAL etc. This package
10142 # also provides the standard strerror() function to
10143 # convert error codes to textual representation, as
10144 # well as an implementation of the errno idiom.
10146 cdl_package CYGPKG_ERROR {
10147 # Packages cannot be added or removed, nor can their version be changed,
10148 # simply by editing their value. Instead the appropriate configuration
10149 # should be used to perform these actions.
10151 # This value cannot be modified here.
10153 # Current value: 1 current
10154 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10155 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10161 # This package controls the behaviour of the
10162 # errno variable (or more strictly, expression)
10165 cdl_component CYGPKG_ERROR_ERRNO {
10167 # No user value, uncomment the following line to provide one.
10169 # value_source default
10171 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10172 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10178 # This option controls whether the standard error
10179 # code reporting variable errno is a per-thread
10180 # variable, rather than global.
10182 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10184 # No user value, uncomment the following line to provide one.
10186 # The inferred value should not be edited directly.
10188 # value_source inferred
10190 # Requires: CYGVAR_KERNEL_THREADS_DATA
10191 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10196 # Trace verbosity level for debugging the errno
10197 # retrieval mechanism in errno.cxx. Increase this
10198 # value to get additional trace output.
10200 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10202 # No user value, uncomment the following line to provide one.
10204 # value_source default
10206 # Legal values: 0 to 1
10210 # strerror function
10211 # This package controls the presence and behaviour of the
10212 # strerror() function from <string.h>
10214 cdl_option CYGPKG_ERROR_STRERROR {
10216 # No user value, uncomment the following line to provide one.
10218 # value_source default
10220 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10221 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10225 # Error package build options
10226 # Package specific build options including control over
10227 # compiler flags used only in building this package,
10228 # and details of which tests are built.
10230 cdl_component CYGPKG_ERROR_OPTIONS {
10231 # There is no associated value.
10235 # Additional compiler flags
10236 # This option modifies the set of compiler flags for
10237 # building the error package. These flags are used in addition
10238 # to the set of global flags.
10240 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10242 # No user value, uncomment the following line to provide one.
10244 # value_source default
10245 # Default value: ""
10248 # Suppressed compiler flags
10249 # This option modifies the set of compiler flags for
10250 # building the error package. These flags are removed from
10251 # the set of global flags if present.
10253 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10255 # No user value, uncomment the following line to provide one.
10257 # value_source default
10258 # Default value: ""