1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX51 current ;
34 package -hardware CYGPKG_HAL_ARM_TX51KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX51 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX51
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX51 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX51 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX51 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX51KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # This option is not active
803 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
804 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
805 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
809 # No user value, uncomment the following line to provide one.
811 # value_source default
816 # Ethernet transceiver (PHY) support
817 # API for ethernet PHY devices
819 cdl_package CYGPKG_DEVS_ETH_PHY {
820 # Packages cannot be added or removed, nor can their version be changed,
821 # simply by editing their value. Instead the appropriate configuration
822 # should be used to perform these actions.
824 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
825 # CYGPKG_IO_ETH_DRIVERS == current
828 # This value cannot be modified here.
830 # Current value: 1 current
831 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
832 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
837 # Enable driver debugging
838 # Enables the diagnostic debug messages on the
841 cdl_option CYGDBG_DEVS_ETH_PHY {
843 # No user value, uncomment the following line to provide one.
845 # value_source default
849 # Time period (seconds) to wait for auto-negotiation
850 # The length of time to wait for auto-negotiation to complete
851 # before giving up and declaring the link dead/missing.
853 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
855 # No user value, uncomment the following line to provide one.
857 # value_source default
862 # Include support for National Semiconductor DP83847 DsPHYTER II
864 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
866 # No user value, uncomment the following line to provide one.
868 # value_source default
873 # Include support for AMD 79C874 NetPHY
875 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
877 # No user value, uncomment the following line to provide one.
879 # value_source default
884 # Include support for Intel LXT972xxx PHY
886 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
888 # No user value, uncomment the following line to provide one.
890 # value_source default
895 # Include support for ICS 1890 PHY
897 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
899 # No user value, uncomment the following line to provide one.
901 # value_source default
906 # Include support for ICS 1892 PHY
908 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
910 # No user value, uncomment the following line to provide one.
912 # value_source default
917 # Include support for ICS 1893 and 1893AF PHY
919 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
921 # No user value, uncomment the following line to provide one.
923 # value_source default
928 # Include support for the Davicom DM9161A PHY
930 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
932 # No user value, uncomment the following line to provide one.
934 # value_source default
939 # Include support for the Micrel KS8721 PHY
941 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
943 # No user value, uncomment the following line to provide one.
945 # value_source default
950 # Include support for SMSC LAN8700 NetPHY
952 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
954 # No user value, uncomment the following line to provide one.
956 # The inferred value should not be edited directly.
958 # value_source inferred
961 # The following properties are affected by this value
962 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
963 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
968 # ISO C library internationalization functions
970 # This package provides internationalization functions specified by the
971 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
972 # functionality and <ctype.h> functionality.
974 cdl_package CYGPKG_LIBC_I18N {
975 # Packages cannot be added or removed, nor can their version be changed,
976 # simply by editing their value. Instead the appropriate configuration
977 # should be used to perform these actions.
979 # This value cannot be modified here.
981 # Current value: 1 current
982 # Requires: CYGPKG_ISOINFRA
983 # CYGPKG_ISOINFRA == current
989 # These options determine which locales other than the "C" locale
990 # are supported and hence contribute to the size of the executable.
992 cdl_component CYGPKG_LIBC_I18N_LOCALES {
993 # There is no associated value.
997 # Support for multiple locales required
999 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1002 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1003 # This value cannot be modified here.
1005 # Current value: 0 0
1006 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1007 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1010 # The following properties are affected by this value
1013 # C-SJIS locale support
1014 # This option controls if the "C-SJIS" locale will be
1015 # supported by setlocale(). The locale is a hybrid locale
1016 # that is mostly the "C" locale with Japanese SJIS multibyte
1019 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1021 # No user value, uncomment the following line to provide one.
1023 # value_source default
1026 # The following properties are affected by this value
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1033 # C-JIS locale support
1034 # This option controls if the "C-JIS" locale will be
1035 # supported by setlocale(). The locale is a hybrid locale
1036 # that is mostly the "C" locale with Japanese JIS multibyte
1039 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1041 # No user value, uncomment the following line to provide one.
1043 # value_source default
1046 # The following properties are affected by this value
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1053 # C-EUCJP locale support
1054 # This option controls if the "C-EUCJP" locale will be
1055 # supported by setlocale(). The locale is a hybrid locale
1056 # that is mostly the "C" locale with Japanese EUCJP multibyte
1059 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1061 # No user value, uncomment the following line to provide one.
1063 # value_source default
1066 # The following properties are affected by this value
1067 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1068 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1069 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1070 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1074 # Newlib's ctype implementation
1075 # This option enables the implementation of the ctype functions
1076 # that comes with newlib. It is table driven and therefore
1077 # exhibits different performance characteristics. It also offers
1078 # a limited amount of binary compatibility
1079 # with newlib so that programs linked against newlib ctype/locale
1080 # do not need to be recompiled when linked with eCos.
1082 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1084 # No user value, uncomment the following line to provide one.
1086 # value_source default
1088 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1089 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1093 # Per-thread multibyte state
1094 # This option controls whether the multibyte character
1095 # handling functions mblen(), mbtowc(), and wctomb(),
1096 # have their state recorded on a per-thread
1097 # basis rather than global. If this option is
1098 # disabled, some per-thread space can be saved.
1099 # Enabling this option will use three slots
1100 # of kernel per-thread data. You should ensure you
1101 # have enough slots configured for all your
1104 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1105 # This option is not active
1106 # ActiveIf constraint: CYGPKG_KERNEL
1107 # CYGPKG_KERNEL (unknown) == 0
1111 # No user value, uncomment the following line to provide one.
1113 # value_source default
1114 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1115 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1117 # Requires: CYGVAR_KERNEL_THREADS_DATA
1118 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1122 # Size of locale name strings
1123 # This option controls the maximum size of
1124 # locale names and is used, among other things
1125 # to instantiate a static string used
1126 # as a return value from the
1127 # setlocale() function. When requesting the
1128 # current locale settings with LC_ALL, a string
1129 # must be constructed to contain this data, rather
1130 # than just returning a constant string. This
1131 # string data is stored in the static string.
1132 # This depends on the length of locale names,
1133 # hence this option. If just the C locale is
1134 # present, this option can be set as low as 2.
1136 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1138 # No user value, uncomment the following line to provide one.
1140 # value_source default
1141 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1142 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1144 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1146 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1147 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1149 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1152 # Inline versions of <ctype.h> functions
1153 # This option chooses whether the simple character
1154 # classification and conversion functions (e.g.
1155 # isupper(), isalpha(), toupper(), etc.)
1156 # from <ctype.h> are available as inline
1157 # functions. This may improve performance and as
1158 # the functions are small, may even improve code
1161 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1163 # No user value, uncomment the following line to provide one.
1165 # value_source default
1167 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1168 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1172 # C library i18n functions build options
1173 # Package specific build options including control over
1174 # compiler flags used only in building this package,
1175 # and details of which tests are built.
1177 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1178 # There is no associated value.
1182 # Additional compiler flags
1183 # This option modifies the set of compiler flags for
1184 # building the C library. These flags are used in addition
1185 # to the set of global flags.
1187 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1189 # No user value, uncomment the following line to provide one.
1190 # user_value "-fno-rtti -Woverloaded-virtual"
1191 # value_source default
1192 # Default value: "-fno-rtti -Woverloaded-virtual"
1195 # Suppressed compiler flags
1196 # This option modifies the set of compiler flags for
1197 # building the C library. These flags are removed from
1198 # the set of global flags if present.
1200 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1202 # No user value, uncomment the following line to provide one.
1203 # user_value -Wno-pointer-sign
1204 # value_source default
1205 # Default value: -Wno-pointer-sign
1208 # C library i18n function tests
1209 # This option specifies the set of tests for the C library
1212 cdl_option CYGPKG_LIBC_I18N_TESTS {
1213 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1215 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1220 # ISO C library general utility functions
1221 # doc: ref/libc.html
1222 # This package provides general utility functions in <stdlib.h>
1223 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1225 cdl_package CYGPKG_LIBC_STDLIB {
1226 # Packages cannot be added or removed, nor can their version be changed,
1227 # simply by editing their value. Instead the appropriate configuration
1228 # should be used to perform these actions.
1230 # This value cannot be modified here.
1232 # Current value: 1 current
1233 # Requires: CYGPKG_ISOINFRA
1234 # CYGPKG_ISOINFRA == current
1236 # Requires: CYGINT_ISO_CTYPE
1237 # CYGINT_ISO_CTYPE == 1
1239 # Requires: CYGINT_ISO_STRING_STRFUNCS
1240 # CYGINT_ISO_STRING_STRFUNCS == 1
1245 # Inline versions of <stdlib.h> functions
1246 # This option chooses whether some of the
1247 # particularly simple standard utility functions
1248 # from <stdlib.h> are available as inline
1249 # functions. This may improve performance, and as
1250 # the functions are small, may even improve code
1253 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1254 # There is no associated value.
1260 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1262 # No user value, uncomment the following line to provide one.
1264 # value_source default
1266 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1267 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1273 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1275 # No user value, uncomment the following line to provide one.
1277 # value_source default
1279 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1280 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1284 # atof() / atoi() / atol()
1286 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1288 # No user value, uncomment the following line to provide one.
1290 # value_source default
1292 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1293 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1298 # Random number generation
1299 # These options control the behaviour of the
1300 # functions rand(), srand() and rand_r()
1302 cdl_component CYGPKG_LIBC_RAND {
1303 # There is no associated value.
1307 # Per-thread random seed
1308 # doc: ref/libc-thread-safety.html
1309 # This option controls whether the pseudo-random
1310 # number generation functions rand() and srand()
1311 # have their state recorded on a per-thread
1312 # basis rather than global. If this option is
1313 # disabled, some per-thread space can be saved.
1314 # Note there is also a POSIX-standard rand_r()
1315 # function to achieve a similar effect with user
1316 # support. Enabling this option will use one slot
1317 # of kernel per-thread data. You should ensure you
1318 # have enough slots configured for all your
1321 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1323 # No user value, uncomment the following line to provide one.
1325 # value_source default
1327 # Requires: CYGVAR_KERNEL_THREADS_DATA
1328 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1332 # Random number seed
1333 # This selects the initial random number seed for
1334 # rand()'s pseudo-random number generator. For
1335 # strict ISO standard compliance, this should be 1,
1336 # as per section 7.10.2.2 of the standard.
1338 cdl_option CYGNUM_LIBC_RAND_SEED {
1340 # No user value, uncomment the following line to provide one.
1342 # value_source default
1344 # Legal values: 0 to 0x7fffffff
1348 # Trace verbosity level for debugging the rand(),
1349 # srand() and rand_r() functions. Increase this
1350 # value to get additional trace output.
1352 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1354 # No user value, uncomment the following line to provide one.
1356 # value_source default
1358 # Legal values: 0 to 1
1361 # Simplest implementation
1362 # This provides a very simple implementation of rand()
1363 # that does not perform well with randomness in the
1364 # lower significant bits. However it is exceptionally
1365 # fast. It uses the sample algorithm from the ISO C
1368 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1370 # No user value, uncomment the following line to provide one.
1372 # value_source default
1376 # Simple implementation #1
1377 # This provides a very simple implementation of rand()
1378 # based on the simplest implementation above. However
1379 # it does try to work around the lack of randomness
1380 # in the lower significant bits, at the expense of a
1383 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1390 # Knuth implementation #1
1391 # This implements a slightly more complex algorithm
1392 # published in Donald E. Knuth's Art of Computer
1393 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1394 # This produces better random numbers than the
1395 # simplest approach but is slower.
1397 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1406 # This option allows use of the utility function
1407 # strtod() (and consequently atof()) to convert
1408 # from string to double precision floating point
1409 # numbers. Disabling this option removes the
1410 # dependency on the math library package.
1412 cdl_option CYGFUN_LIBC_strtod {
1414 # No user value, uncomment the following line to provide one.
1416 # value_source default
1417 # Default value: 0 != CYGPKG_LIBM
1418 # CYGPKG_LIBM (unknown) == 0
1420 # Requires: CYGPKG_LIBM
1421 # CYGPKG_LIBM (unknown) == 0
1425 # Provides long long conversion functions
1426 # Enabling this option will provide support for the strtoll(),
1427 # strtoull() and atoll() conversion functions, which are
1428 # the long long variants of the standard versions of these
1429 # functions. Supporting this requires extra code and compile
1432 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1439 # bsearch() tracing level
1440 # Trace verbosity level for debugging the <stdlib.h>
1441 # binary search function bsearch(). Increase this
1442 # value to get additional trace output.
1444 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1446 # No user value, uncomment the following line to provide one.
1448 # value_source default
1450 # Legal values: 0 to 1
1453 # qsort() tracing level
1454 # Trace verbosity level for debugging the <stdlib.h>
1455 # quicksort function qsort(). Increase this value
1456 # to get additional trace output.
1458 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1460 # No user value, uncomment the following line to provide one.
1462 # value_source default
1464 # Legal values: 0 to 1
1467 # C library stdlib build options
1468 # Package specific build options including control over
1469 # compiler flags used only in building this package,
1470 # and details of which tests are built.
1472 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1473 # There is no associated value.
1477 # Additional compiler flags
1478 # This option modifies the set of compiler flags for
1479 # building this package. These flags are used in addition
1480 # to the set of global flags.
1482 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1484 # No user value, uncomment the following line to provide one.
1485 # user_value "-fno-rtti -Woverloaded-virtual"
1486 # value_source default
1487 # Default value: "-fno-rtti -Woverloaded-virtual"
1490 # Suppressed compiler flags
1491 # This option modifies the set of compiler flags for
1492 # building this package. These flags are removed from
1493 # the set of global flags if present.
1495 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1497 # No user value, uncomment the following line to provide one.
1498 # user_value -Wno-pointer-sign
1499 # value_source default
1500 # Default value: -Wno-pointer-sign
1503 # C library stdlib tests
1504 # This option specifies the set of tests for this package.
1506 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1507 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1509 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1516 # doc: ref/the-ecos-hardware-abstraction-layer.html
1517 # The eCos HAL package provide a porting layer for
1518 # higher-level parts of the system such as the kernel and the
1519 # C library. Each installation should have HAL packages for
1520 # one or more architectures, and for each architecture there
1521 # may be one or more supported platforms. It is necessary to
1522 # select one target architecture and one platform for that
1523 # architecture. There are also a number of configuration
1524 # options that are common to all HAL packages.
1526 cdl_package CYGPKG_HAL {
1527 # Packages cannot be added or removed, nor can their version be changed,
1528 # simply by editing their value. Instead the appropriate configuration
1529 # should be used to perform these actions.
1531 # This value cannot be modified here.
1533 # Current value: 1 current
1534 # Requires: CYGPKG_INFRA
1535 # CYGPKG_INFRA == current
1538 # The following properties are affected by this value
1542 # Platform-independent HAL options
1543 # A number of configuration options are common to most or all
1544 # HAL packages, for example options controlling how much state
1545 # should be saved during a context switch. The implementations
1546 # of these options will vary from architecture to architecture.
1548 cdl_component CYGPKG_HAL_COMMON {
1549 # There is no associated value.
1553 # Provide eCos kernel support
1554 # The HAL can be configured to either support the full eCos
1555 # kernel, or to support only very simple applications which do
1556 # not require a full kernel. If kernel support is not required
1557 # then some of the startup, exception, and interrupt handling
1558 # code can be eliminated.
1560 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1562 # No user value, uncomment the following line to provide one.
1564 # value_source default
1565 # Default value: CYGPKG_KERNEL
1566 # CYGPKG_KERNEL (unknown) == 0
1568 # Requires: CYGPKG_KERNEL
1569 # CYGPKG_KERNEL (unknown) == 0
1573 # HAL exception support
1574 # When a processor exception occurs, for example an attempt to
1575 # execute an illegal instruction or to perform a divide by
1576 # zero, this exception may be handled in a number of different
1577 # ways. If the target system has gdb support then typically
1578 # the exception will be handled by gdb code. Otherwise if the
1579 # HAL exception support is enabled then the HAL will invoke a
1580 # routine deliver_exception(). Typically this routine will be
1581 # provided by the eCos kernel, but it is possible for
1582 # application code to provide its own implementation. If the
1583 # HAL exception support is not enabled and a processor
1584 # exception occurs then the behaviour of the system is
1587 cdl_option CYGPKG_HAL_EXCEPTIONS {
1589 # No user value, uncomment the following line to provide one.
1591 # value_source default
1592 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1593 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1595 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1596 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1600 # Stop calling constructors early
1601 # This option supports environments where some constructors
1602 # must be run in the context of a thread rather than at
1603 # simple system startup time. A boolean flag named
1604 # cyg_hal_stop_constructors is set to 1 when constructors
1605 # should no longer be invoked. It is up to some other
1606 # package to deal with the rest of the constructors.
1607 # In the current version this is only possible with the
1610 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1612 # No user value, uncomment the following line to provide one.
1614 # value_source default
1616 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1617 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1621 # HAL uses the MMU and allows for CDL manipulation of it's use
1623 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1624 # No options implement this inferface
1625 # This value cannot be modified here.
1629 # The following properties are affected by this value
1630 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1631 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1634 # Install MMU tables.
1635 # This option controls whether this application installs
1636 # its own Memory Management Unit (MMU) tables, or relies on the
1637 # existing environment to run.
1639 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1640 # This option is not active
1641 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1642 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1646 # No user value, uncomment the following line to provide one.
1648 # value_source default
1649 # Default value: CYG_HAL_STARTUP != "RAM"
1650 # CYG_HAL_STARTUP == ROMRAM
1653 # The following properties are affected by this value
1654 # option CYGSEM_HAL_STATIC_MMU_TABLES
1655 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1658 # Use static MMU tables.
1659 # This option defines an environment where any Memory
1660 # Management Unit (MMU) tables are constant. Normally used by ROM
1661 # based environments, this provides a way to save RAM usage which
1662 # would otherwise be required for these tables.
1664 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1666 # No user value, uncomment the following line to provide one.
1668 # value_source default
1670 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1671 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1675 # Route diagnostic output to debug channel
1676 # If not inheriting the console setup from the ROM monitor,
1677 # it is possible to redirect diagnostic output to the debug
1678 # channel by enabling this option. Depending on the debugger
1679 # used it may also be necessary to select a mangler for the
1680 # output to be displayed by the debugger.
1682 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1683 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1684 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1686 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1687 # CYGPKG_HAL_ARM == current
1688 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1689 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1690 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1694 # No user value, uncomment the following line to provide one.
1696 # value_source default
1697 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1698 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1699 # CYG_HAL_STARTUP == ROMRAM
1702 # The following properties are affected by this value
1703 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1704 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1708 # Mangler used on diag output
1709 # It is sometimes necessary to mangle (encode) the
1710 # diag ASCII text output in order for it to show up at the
1711 # other end. In particular, GDB may silently ignore raw
1714 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1715 # This option is not active
1716 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1719 # No user value, uncomment the following line to provide one.
1721 # value_source default
1722 # Default value: GDB
1723 # Legal values: "GDB" "None"
1728 # HAL interrupt handling
1729 # A number of configuration options related to interrupt
1730 # handling are common to most or all HAL packages, even though
1731 # the implementations will vary from architecture to
1734 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1735 # There is no associated value.
1739 # Use separate stack for interrupts
1740 # When an interrupt occurs this interrupt can be handled either
1741 # on the current stack or on a separate stack maintained by the
1742 # HAL. Using a separate stack requires a small number of extra
1743 # instructions in the interrupt handling code, but it has the
1744 # advantage that it is no longer necessary to allow extra space
1745 # in every thread stack for the interrupt handlers. The amount
1746 # of extra space required depends on the interrupt handlers
1747 # that are being used.
1749 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1751 # No user value, uncomment the following line to provide one.
1753 # The inferred value should not be edited directly.
1755 # value_source inferred
1758 # The following properties are affected by this value
1759 # package CYGPKG_REDBOOT
1760 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1763 # Interrupt stack size
1764 # This configuration option specifies the stack size in bytes
1765 # for the interrupt stack. Typically this should be a multiple
1766 # of 16, but the exact requirements will vary from architecture
1767 # to architecture. The interrupt stack serves two separate
1768 # purposes. It is used as the stack during system
1769 # initialization. In addition, if the interrupt system is
1770 # configured to use a separate stack then all interrupts will
1771 # be processed on this stack. The exact memory requirements
1772 # will vary from application to application, and will depend
1773 # heavily on whether or not other interrupt-related options,
1774 # for example nested interrupts, are enabled. On most targets,
1775 # in a configuration with no kernel this stack will also be
1776 # the stack used to invoke the application, and must obviously
1777 # be appropriately large in that case.
1779 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1781 # No user value, uncomment the following line to provide one.
1783 # value_source default
1784 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1785 # CYGPKG_KERNEL (unknown) == 0
1787 # Legal values: 128 to 1048576
1790 # Allow nested interrupts
1791 # When an interrupt occurs the HAL interrupt handling code can
1792 # either leave interrupts disabled for the duration of the
1793 # interrupt handling code, or by doing some extra work it can
1794 # reenable interrupts before invoking the interrupt handler and
1795 # thus allow nested interrupts to happen. If all the interrupt
1796 # handlers being used are small and do not involve any loops
1797 # then it is usually better to disallow nested interrupts.
1798 # However if any of the interrupt handlers are more complicated
1799 # than nested interrupts will usually be required.
1801 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1803 # No user value, uncomment the following line to provide one.
1805 # value_source default
1809 # Save minimum context on interrupt
1810 # The HAL interrupt handling code can exploit the calling conventions
1811 # defined for a given architecture to reduce the amount of state
1812 # that has to be saved. Generally this improves performance and
1813 # reduces code size. However it can make source-level debugging
1816 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1818 # No user value, uncomment the following line to provide one.
1820 # The inferred value should not be edited directly.
1822 # value_source inferred
1825 # The following properties are affected by this value
1826 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1827 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1828 # component CYGBLD_BUILD_REDBOOT
1829 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1832 # Chain all interrupts together
1833 # Interrupts can be attached to vectors either singly, or be
1834 # chained together. The latter is necessary if there is no way
1835 # of discovering which device has interrupted without
1836 # inspecting the device itself. It can also reduce the amount
1837 # of RAM needed for interrupt decoding tables and code.
1839 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1841 # No user value, uncomment the following line to provide one.
1843 # value_source default
1847 # Ignore spurious [fleeting] interrupts
1848 # On some hardware, interrupt sources may not be de-bounced or
1849 # de-glitched. Rather than try to handle these interrupts (no
1850 # handling may be possible), this option allows the HAL to simply
1851 # ignore them. In most cases, if the interrupt is real it will
1852 # reoccur in a detectable form.
1854 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1856 # No user value, uncomment the following line to provide one.
1858 # value_source default
1863 # HAL context switch support
1864 # A number of configuration options related to thread contexts
1865 # are common to most or all HAL packages, even though the
1866 # implementations will vary from architecture to architecture.
1868 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1869 # There is no associated value.
1871 # The following properties are affected by this value
1875 # Use minimum thread context
1876 # The thread context switch code can exploit the calling
1877 # conventions defined for a given architecture to reduce the
1878 # amount of state that has to be saved during a context
1879 # switch. Generally this improves performance and reduces
1880 # code size. However it can make source-level debugging more
1883 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1885 # No user value, uncomment the following line to provide one.
1887 # The inferred value should not be edited directly.
1889 # value_source inferred
1892 # The following properties are affected by this value
1893 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1894 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1895 # component CYGBLD_BUILD_REDBOOT
1896 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1900 # Explicit control over cache behaviour
1901 # These options let the default behaviour of the caches
1902 # be easily configurable.
1904 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1905 # There is no associated value.
1909 # Enable DATA cache on startup
1910 # Enabling this option will cause the data cache to be enabled
1911 # as soon as practicable when eCos starts up. One would choose
1912 # to disable this if the data cache cannot safely be turned on,
1913 # such as a case where the cache(s) require additional platform
1916 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1918 # No user value, uncomment the following line to provide one.
1920 # value_source default
1925 # DATA cache mode on startup
1926 # This option controls the mode the cache will be set to
1927 # when enabled on startup.
1929 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1931 # No user value, uncomment the following line to provide one.
1932 # user_value COPYBACK
1933 # value_source default
1934 # Default value: COPYBACK
1935 # Legal values: "COPYBACK" "WRITETHRU"
1939 # Enable INSTRUCTION cache on startup
1940 # Enabling this option will cause the instruction cache to be enabled
1941 # as soon as practicable when eCos starts up. One would choose
1942 # to disable this if the instruction cache cannot safely be turned on,
1943 # such as a case where the cache(s) require additional platform
1946 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1948 # No user value, uncomment the following line to provide one.
1950 # value_source default
1955 # Source-level debugging support
1956 # If the source level debugger gdb is to be used for debugging
1957 # application code then it may be necessary to configure in support
1958 # for this in the HAL.
1960 cdl_component CYGPKG_HAL_DEBUG {
1961 # There is no associated value.
1965 # Support for GDB stubs
1966 # The HAL implements GDB stubs for the target.
1968 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1969 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
1970 # This value cannot be modified here.
1974 # The following properties are affected by this value
1975 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1976 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1977 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1978 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1981 # Include GDB stubs in HAL
1982 # This option causes a set of GDB stubs to be included into the
1983 # system. On some target systems the GDB support will be
1984 # provided by other means, for example by a ROM monitor. On
1985 # other targets, especially when building a ROM-booting system,
1986 # the necessary support has to go into the target library
1987 # itself. When GDB stubs are include in a configuration, HAL
1988 # serial drivers must also be included.
1990 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1991 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1992 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1996 # No user value, uncomment the following line to provide one.
1998 # The inferred value should not be edited directly.
2000 # value_source inferred
2002 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2003 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2005 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2006 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2008 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2009 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2011 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2013 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2016 # The following properties are affected by this value
2017 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2018 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2019 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2022 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2024 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2025 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2026 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2027 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2028 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2029 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2030 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2031 # option CYGPKG_HAL_GDB_FILEIO
2032 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2033 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2034 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2035 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2036 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2037 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2038 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2041 # Support for external break support in GDB stubs
2042 # The HAL implements external break (or asynchronous interrupt)
2043 # in the GDB stubs for the target.
2045 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2046 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
2047 # This value cannot be modified here.
2051 # The following properties are affected by this value
2052 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2053 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2056 # Include GDB external break support for stubs
2057 # This option causes the GDB stub to add a serial interrupt handler
2058 # which will listen for GDB break packets. This lets you stop the
2059 # target asynchronously when using GDB, usually by hitting Control+C
2060 # or pressing the STOP button. This option differs from
2061 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2062 # GDB stubs are present.
2064 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2065 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2066 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2070 # No user value, uncomment the following line to provide one.
2072 # value_source default
2073 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2074 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2076 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2077 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2080 # The following properties are affected by this value
2081 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2082 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2083 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2084 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2085 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2086 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2089 # Platform does not support CTRLC
2091 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2092 # No options implement this inferface
2093 # This value cannot be modified here.
2097 # The following properties are affected by this value
2098 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2099 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2102 # Include GDB external break support when no stubs
2103 # This option adds an interrupt handler for the GDB serial line
2104 # which will listen for GDB break packets. This lets you stop the
2105 # target asynchronously when using GDB, usually by hitting Control+C
2106 # or pressing the STOP button. This option differs from
2107 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2108 # stubs are NOT present.
2110 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2111 # This option is not active
2112 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2113 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2114 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2116 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2117 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2121 # No user value, uncomment the following line to provide one.
2123 # value_source default
2124 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2125 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2127 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2128 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2131 # The following properties are affected by this value
2132 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2133 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2134 # component CYGBLD_BUILD_REDBOOT
2135 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2138 # Include GDB multi-threading debug support
2139 # This option enables some extra HAL code which is needed
2140 # to support multi-threaded source level debugging.
2142 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2143 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2144 # CYGSEM_HAL_ROM_MONITOR == 1
2145 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2149 # No user value, uncomment the following line to provide one.
2151 # value_source default
2154 # The following properties are affected by this value
2155 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2156 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2157 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2158 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2161 # Number of times to retry sending a $O packet
2162 # This option controls the number of attempts that eCos programs
2163 # will make to send a $O packet to a host GDB process. If it is
2164 # set non-zero, then the target process will attempt to resend the
2165 # $O packet data up to this number of retries. Caution: use of
2166 # this option is not recommended as it can thoroughly confuse the
2169 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2171 # No user value, uncomment the following line to provide one.
2173 # value_source default
2177 # Timeout period for GDB packets
2178 # This option controls the time (in milliseconds) that eCos programs
2179 # will wait for a response when sending packets to a host GDB process.
2180 # If this time elapses, then the packet will be resent, up to some
2181 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2183 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2185 # No user value, uncomment the following line to provide one.
2187 # value_source default
2188 # Default value: 500
2191 # Location of CRC32 table
2192 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2193 # and placed in ROM, or generated at runtime in RAM. Depending on
2194 # your memory constraints, one of these options may be better.
2196 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2198 # No user value, uncomment the following line to provide one.
2200 # value_source default
2201 # Default value: RAM
2202 # Legal values: "ROM" "RAM"
2206 # ROM monitor support
2207 # Support for ROM monitors can be built in to your application.
2208 # It may also be relevant to build your application as a ROM monitor
2209 # itself. Such options are contained here if relevant for your chosen
2210 # platform. The options and ROM monitors available to choose are
2211 # platform-dependent.
2213 cdl_component CYGPKG_HAL_ROM_MONITOR {
2214 # There is no associated value.
2216 # The following properties are affected by this value
2220 # Target has virtual vector support
2222 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2223 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
2224 # This value cannot be modified here.
2228 # The following properties are affected by this value
2229 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2230 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2233 # Target supports baud rate control via vectors
2234 # Whether this target supports the __COMMCTL_GETBAUD
2235 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2237 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2238 # Implemented by CYGPKG_HAL_ARM_MX51, active, enabled
2239 # This value cannot be modified here.
2243 # The following properties are affected by this value
2244 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2245 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2248 # Enable use of virtual vector calling interface
2249 # Virtual vector support allows the HAL to let the ROM
2250 # monitor handle certain operations. The virtual vector table
2251 # defines a calling interface between applications running in
2252 # RAM and the ROM monitor.
2254 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2255 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2256 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2259 # Calculated value: 1
2263 # The following properties are affected by this value
2264 # component CYGBLD_BUILD_REDBOOT
2265 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2266 # package CYGPKG_DEVS_ETH_PHY
2267 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2271 # Inherit console settings from ROM monitor
2272 # When this option is set, the application will inherit
2273 # the console as set up by the ROM monitor. This means
2274 # that the application will use whatever channel and
2275 # mangling style was used by the ROM monitor when
2276 # the application was launched.
2278 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2279 # This option is not active
2280 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2281 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2285 # No user value, uncomment the following line to provide one.
2287 # value_source default
2288 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2289 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2294 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2295 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2296 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2299 # Debug channel is configurable
2300 # This option is a configuration hint - it is enabled
2301 # when the HAL initialization code will make use
2302 # of the debug channel configuration option.
2304 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2305 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2306 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2310 # The following properties are affected by this value
2311 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2312 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2315 # Console channel is configurable
2316 # This option is a configuration hint - it is enabled
2317 # when the HAL initialization code will make use
2318 # of the console channel configuration option.
2320 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2321 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2322 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2323 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2327 # The following properties are affected by this value
2328 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2329 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2332 # Initialize whole of virtual vector table
2333 # This option will cause the whole of the virtual
2334 # vector table to be initialized with dummy values on
2335 # startup. When this option is enabled, all the
2336 # options below must also be enabled - or the
2337 # table would be empty when the application
2339 # On targets where older ROM monitors without
2340 # virtual vector support may still be in use, it is
2341 # necessary for RAM applictions to initialize the
2342 # table (since all HAL diagnostics and debug IO
2343 # happens via the table).
2345 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2347 # No user value, uncomment the following line to provide one.
2349 # value_source default
2350 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2351 # CYG_HAL_STARTUP == ROMRAM
2352 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2354 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2355 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2357 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2358 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2360 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2361 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2363 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2366 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2367 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2370 # The following properties are affected by this value
2371 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2372 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2373 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2374 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2375 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2376 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2377 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2378 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2379 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2380 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2381 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2382 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2383 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2384 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2387 # Claim virtual vector table entries by default
2388 # By default most virtual vectors will be claimed by
2389 # RAM startup configurations, meaning that the RAM
2390 # application will provide the services. The
2391 # exception is COMMS support (HAL
2392 # diagnostics/debugging IO) which is left in the
2393 # control of the ROM monitor.
2394 # The reasoning behind this is to get as much of the
2395 # code exercised during regular development so it
2396 # is known to be working the few times a new ROM
2397 # monitor or a ROM production configuration is used
2398 # - COMMS are excluded only by necessity in order to
2399 # avoid breaking an existing debugger connections
2400 # (there may be ways around this).
2401 # For production RAM configurations this option can
2402 # be switched off, causing the appliction to rely on
2403 # the ROM monitor for these services, thus
2404 # saving some space.
2405 # Individual vectors may also be left unclaimed,
2406 # controlled by the below options (meaning that the
2407 # associated service provided by the ROM monitor
2410 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2411 # This option is not active
2412 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2413 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2417 # No user value, uncomment the following line to provide one.
2419 # value_source default
2422 # The following properties are affected by this value
2423 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2424 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2426 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2427 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2428 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2429 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2430 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2433 # Claim reset virtual vectors
2434 # This option will cause the reset and kill_by_reset
2435 # virtual vectors to be claimed.
2437 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2439 # No user value, uncomment the following line to provide one.
2441 # value_source default
2442 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2447 # The following properties are affected by this value
2448 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2449 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2452 # Claim version virtual vectors
2453 # This option will cause the version
2454 # virtual vectors to be claimed.
2456 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2458 # No user value, uncomment the following line to provide one.
2460 # value_source default
2461 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2462 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2466 # Claim delay_us virtual vector
2467 # This option will cause the delay_us
2468 # virtual vector to be claimed.
2470 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2472 # No user value, uncomment the following line to provide one.
2474 # value_source default
2475 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2480 # The following properties are affected by this value
2481 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2482 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2485 # Claim cache virtual vectors
2486 # This option will cause the cache virtual vectors
2489 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2491 # No user value, uncomment the following line to provide one.
2493 # value_source default
2494 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2496 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2499 # The following properties are affected by this value
2500 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2501 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2504 # Claim data virtual vectors
2505 # This option will cause the data virtual vectors
2506 # to be claimed. At present there is only one, used
2507 # by the RedBoot ethernet driver to share diag output.
2509 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2511 # No user value, uncomment the following line to provide one.
2513 # value_source default
2514 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2516 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2519 # The following properties are affected by this value
2520 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2521 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2524 # Claim comms virtual vectors
2525 # This option will cause the communication tables
2526 # that are part of the virtual vectors mechanism to
2527 # be claimed. Note that doing this may cause an
2528 # existing ROM monitor communication connection to
2529 # be closed. For this reason, the option is disabled
2530 # per default for normal application
2533 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2535 # No user value, uncomment the following line to provide one.
2537 # value_source default
2538 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2539 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2540 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2543 # The following properties are affected by this value
2544 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2545 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2546 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2547 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2548 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2549 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2550 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2551 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # Do diagnostic IO via virtual vector table
2555 # All HAL IO happens via the virtual vector table / comm
2556 # tables when those tables are supported by the HAL.
2557 # If so desired, the low-level IO functions can
2558 # still be provided by the RAM application by
2559 # enabling the CLAIM_COMMS option.
2561 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2562 # Calculated value: 1
2566 # The following properties are affected by this value
2567 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2568 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2569 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2570 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2574 # Behave as a ROM monitor
2575 # Enable this option if this program is to be used as a ROM monitor,
2576 # i.e. applications will be loaded into RAM on the TX51 module, and this
2577 # ROM monitor may process exceptions or interrupts generated from the
2578 # application. This enables features such as utilizing a separate
2579 # interrupt stack when exceptions are generated.
2581 cdl_option CYGSEM_HAL_ROM_MONITOR {
2583 # No user value, uncomment the following line to provide one.
2585 # The inferred value should not be edited directly.
2587 # value_source inferred
2589 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2590 # CYG_HAL_STARTUP == ROMRAM
2591 # CYG_HAL_STARTUP == ROMRAM
2594 # The following properties are affected by this value
2595 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2596 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2597 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2598 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2599 # option CYGPRI_REDBOOT_ROM_MONITOR
2600 # Requires: CYGSEM_HAL_ROM_MONITOR
2603 # Work with a ROM monitor
2604 # Support can be enabled for different varieties of ROM monitor.
2605 # This support changes various eCos semantics such as the encoding
2606 # of diagnostic output, or the overriding of hardware interrupt
2608 # Firstly there is "Generic" support which prevents the HAL
2609 # from overriding the hardware vectors that it does not use, to
2610 # instead allow an installed ROM monitor to handle them. This is
2611 # the most basic support which is likely to be common to most
2612 # implementations of ROM monitor.
2613 # "GDB_stubs" provides support when GDB stubs are included in
2614 # the ROM monitor or boot ROM.
2616 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2618 # No user value, uncomment the following line to provide one.
2620 # value_source default
2621 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2622 # CYG_HAL_STARTUP == ROMRAM
2624 # Legal values: "Generic" "GDB_stubs"
2625 # Requires: CYG_HAL_STARTUP == "RAM"
2626 # CYG_HAL_STARTUP == ROMRAM
2629 # The following properties are affected by this value
2630 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2631 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2632 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2633 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2634 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2635 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2636 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2637 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2641 # Platform defined I/O channels.
2642 # Platforms which provide additional I/O channels can implement
2643 # this interface, indicating that the function plf_if_init()
2644 # needs to be called.
2646 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2647 # No options implement this inferface
2648 # This value cannot be modified here.
2653 # Platform IDE I/O support.
2654 # Platforms which provide IDE controllers can implement
2655 # this interface, indicating that IDE I/O macros are
2658 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2659 # No options implement this inferface
2660 # This value cannot be modified here.
2664 # The following properties are affected by this value
2665 # component CYGSEM_REDBOOT_DISK_IDE
2666 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2669 # File I/O operations via GDB
2670 # This option enables support for various file I/O
2671 # operations using the GDB remote protocol to communicate
2672 # with GDB. The operations are then performed on the
2673 # debugging host by proxy. These operations are only
2674 # currently available by using a system call interface
2675 # to RedBoot. This may change in the future.
2677 cdl_option CYGPKG_HAL_GDB_FILEIO {
2678 # This option is not active
2679 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2680 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2684 # No user value, uncomment the following line to provide one.
2686 # value_source default
2688 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2689 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2693 # Build Compiler sanity checking tests
2694 # Enabling this option causes compiler tests to be built.
2696 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2698 # No user value, uncomment the following line to provide one.
2700 # value_source default
2703 # The following properties are affected by this value
2704 # component CYGPKG_HAL_TESTS
2705 # Calculated: "tests/context tests/basic"
2706 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2707 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2708 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2712 # This option specifies the set of tests for the common HAL.
2714 cdl_component CYGPKG_HAL_TESTS {
2715 # Calculated value: "tests/context tests/basic"
2716 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2717 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2718 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2719 # CYGINT_HAL_TESTS_NO_CACHES == 0
2720 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2721 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2723 # Current_value: tests/context tests/basic tests/cache tests/intr
2727 # Interface for cache presence
2728 # Some architectures and/or platforms do not have caches. By
2729 # implementing this interface, these can disable the various
2730 # cache-related tests.
2732 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2733 # No options implement this inferface
2734 # This value cannot be modified here.
2736 # Current value: 0 0
2738 # The following properties are affected by this value
2739 # component CYGPKG_HAL_TESTS
2740 # Calculated: "tests/context tests/basic"
2741 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2742 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2743 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2748 # The ARM architecture HAL package provides generic
2749 # support for this processor architecture. It is also
2750 # necessary to select a specific target platform HAL
2753 cdl_package CYGPKG_HAL_ARM {
2754 # Packages cannot be added or removed, nor can their version be changed,
2755 # simply by editing their value. Instead the appropriate configuration
2756 # should be used to perform these actions.
2758 # This value cannot be modified here.
2760 # Current value: 1 current
2762 # The following properties are affected by this value
2763 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2764 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2765 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2766 # ActiveIf: CYGPKG_HAL_ARM
2770 # The CPU architecture supports THUMB mode
2772 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2773 # No options implement this inferface
2774 # This value cannot be modified here.
2778 # The following properties are affected by this value
2779 # option CYGHWR_THUMB
2780 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2781 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2782 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2785 # Enable Thumb instruction set
2786 # Enable use of the Thumb instruction set.
2788 cdl_option CYGHWR_THUMB {
2789 # This option is not active
2790 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2791 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2795 # No user value, uncomment the following line to provide one.
2797 # value_source default
2800 # The following properties are affected by this value
2801 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2802 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # Enable Thumb interworking compiler option
2806 # This option controls the use of -mthumb-interwork in the
2807 # compiler flags. It defaults enabled in Thumb or ROM monitor
2808 # configurations, but can be overridden for reduced memory
2809 # footprint where interworking is not a requirement.
2811 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2812 # This option is not active
2813 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2814 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2818 # No user value, uncomment the following line to provide one.
2820 # value_source default
2821 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2823 # CYGSEM_HAL_ROM_MONITOR == 1
2827 # The platform and architecture supports Big Endian operation
2829 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2830 # No options implement this inferface
2831 # This value cannot be modified here.
2835 # The following properties are affected by this value
2836 # option CYGHWR_HAL_ARM_BIGENDIAN
2837 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2840 # Use big-endian mode
2841 # Use the CPU in big-endian mode.
2843 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2844 # This option is not active
2845 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2846 # CYGINT_HAL_ARM_BIGENDIAN == 0
2850 # No user value, uncomment the following line to provide one.
2852 # value_source default
2856 # The platform uses a processor with an ARM7 core
2858 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2859 # No options implement this inferface
2860 # This value cannot be modified here.
2864 # The following properties are affected by this value
2865 # option CYGHWR_HAL_ARM_CPU_FAMILY
2866 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2867 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2868 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2869 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2871 # option CYGHWR_HAL_ARM_CPU_FAMILY
2872 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2873 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2874 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2875 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2879 # The platform uses a processor with an ARM9 core
2881 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2882 # Implemented by CYGPKG_HAL_ARM_MX51, active, enabled
2883 # This value cannot be modified here.
2887 # The following properties are affected by this value
2888 # option CYGHWR_HAL_ARM_CPU_FAMILY
2889 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2890 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2891 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2892 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2894 # option CYGHWR_HAL_ARM_CPU_FAMILY
2895 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2896 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2897 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2898 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2902 # The platform uses a processor with a StrongARM core
2904 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2905 # No options implement this inferface
2906 # This value cannot be modified here.
2910 # The following properties are affected by this value
2911 # option CYGHWR_HAL_ARM_CPU_FAMILY
2912 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2913 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2914 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2915 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2917 # option CYGHWR_HAL_ARM_CPU_FAMILY
2918 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2919 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2920 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2921 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2925 # The platform uses a processor with a XScale core
2927 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2928 # No options implement this inferface
2929 # This value cannot be modified here.
2933 # The following properties are affected by this value
2934 # option CYGHWR_HAL_ARM_CPU_FAMILY
2935 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2936 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2937 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2938 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2940 # option CYGHWR_HAL_ARM_CPU_FAMILY
2941 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2942 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2943 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2944 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2949 # It is possible to optimize code for different
2950 # ARM CPU families. This option selects which CPU to
2951 # optimize for on boards that support multiple CPU types.
2953 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2955 # No user value, uncomment the following line to provide one.
2957 # value_source default
2958 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2959 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2960 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2961 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2963 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2964 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2965 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2966 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2968 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2969 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2970 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2971 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2973 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2974 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2975 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2976 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2979 # Provide diagnostic dump for exceptions
2980 # Print messages about hardware exceptions, including
2981 # raw exception frame dump and register contents.
2983 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2985 # No user value, uncomment the following line to provide one.
2987 # value_source default
2989 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2990 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2994 # Process all exceptions with the eCos application
2995 # Normal RAM-based programs which do not include GDB stubs
2996 # defer processing of the illegal instruction exception to GDB.
2997 # Setting this options allows the program to explicitly handle
2998 # the illegal instruction exception itself. Note: this will
2999 # prevent the use of GDB to debug the application as breakpoints
3000 # will no longer work.
3002 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3004 # No user value, uncomment the following line to provide one.
3006 # value_source default
3010 # Support GDB thread operations via ICE/Multi-ICE
3011 # Allow GDB to get thread information via the ICE/Multi-ICE
3014 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3016 # No user value, uncomment the following line to provide one.
3018 # value_source default
3020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3021 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3023 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3026 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3027 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3031 # Support for 'gprof' callbacks
3032 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3033 # to acquire the interrupt-context PC and SP, when this option is
3036 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3037 # This option is not active
3038 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3039 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3041 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3042 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3043 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3046 # Calculated value: 1
3051 # Accept exceptions and irq's occurring in user mode
3052 # For standalone Redboot based programs running in user mode.
3054 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3056 # No user value, uncomment the following line to provide one.
3058 # value_source default
3062 # Preserve svc spsr before returning to svc mode
3063 # This option secures exception and breakpoint processing
3064 # triggered during execution of application specific SWI
3067 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3069 # No user value, uncomment the following line to provide one.
3071 # value_source default
3077 cdl_option CYGBLD_LINKER_SCRIPT {
3078 # Calculated value: "src/arm.ld"
3080 # Current_value: src/arm.ld
3083 # Implementations of hal_arm_mem_real_region_top()
3085 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3086 # No options implement this inferface
3087 # This value cannot be modified here.
3092 # Freescale SoC architecture
3093 # This HAL variant package provides generic
3094 # support for the Freescale SoC. It is also
3095 # necessary to select a specific target platform HAL
3098 cdl_package CYGPKG_HAL_ARM_MX51 {
3099 # Packages cannot be added or removed, nor can their version be changed,
3100 # simply by editing their value. Instead the appropriate configuration
3101 # should be used to perform these actions.
3103 # This value cannot be modified here.
3105 # Current value: 1 current
3107 # The following properties are affected by this value
3108 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
3109 # ActiveIf: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
3113 # MX51 Tapeout 2.0 support
3114 # When this option is enabled, it indicates support for
3117 cdl_option CYGHWR_MX51_TO2 {
3119 # No user value, uncomment the following line to provide one.
3121 # value_source default
3125 # MX51 mDDR memory support
3126 # When this option is enabled, it indicates support for
3127 # mDDR memory on MX51
3129 cdl_option CYGHWR_MX51_MDDR {
3136 # Processor clock rate
3137 # The processor can run at various frequencies.
3138 # These values are expressed in KHz. Note that there are
3139 # several steppings of the rate to run at different
3140 # maximum frequencies. Check the specs to make sure that your
3141 # particular processor can run at the rate you select here.
3143 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3144 # This option is not active
3145 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3146 # CYG_HAL_STARTUP == ROMRAM
3150 # No user value, uncomment the following line to provide one.
3152 # value_source default
3153 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3154 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3155 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3156 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3158 # Legal values: 150000 200000
3161 # Real-time clock constants
3163 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3164 # There is no associated value.
3168 # Real-time clock numerator
3170 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3171 # Calculated value: 1000000000
3173 # Current_value: 1000000000
3176 # Real-time clock denominator
3177 # This option selects the heartbeat rate for the real-time clock.
3178 # The rate is specified in ticks per second. Change this value
3179 # with caution - too high and your system will become saturated
3180 # just handling clock interrupts, too low and some operations
3181 # such as thread scheduling may become sluggish.
3183 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3185 # No user value, uncomment the following line to provide one.
3187 # value_source default
3188 # Default value: 100
3190 # The following properties are affected by this value
3191 # option CYGNUM_HAL_RTC_PERIOD
3192 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3195 # Real-time clock period
3197 cdl_option CYGNUM_HAL_RTC_PERIOD {
3198 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3199 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3201 # Current_value: 36864
3205 # UART1 available as diagnostic/debug channel
3206 # The chip has multiple serial channels which may be
3207 # used for different things on different platforms. This
3208 # interface allows a platform to indicate that the specified
3209 # serial port can be used as a diagnostic and/or debug channel.
3211 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3212 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3213 # This value cannot be modified here.
3217 # The following properties are affected by this value
3220 # UART2 available as diagnostic/debug channel
3221 # The chip has multiple serial channels which may be
3222 # used for different things on different platforms. This
3223 # interface allows a platform to indicate that the specified
3224 # serial port can be used as a diagnostic and/or debug channel.
3226 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3227 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3228 # This value cannot be modified here.
3232 # The following properties are affected by this value
3235 # UART3 available as diagnostic/debug channel
3236 # The chip has multiple serial channels which may be
3237 # used for different things on different platforms. This
3238 # interface allows a platform to indicate that the specified
3239 # serial port can be used as a diagnostic and/or debug channel.
3241 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3242 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3243 # This value cannot be modified here.
3247 # The following properties are affected by this value
3250 # UART4 available as diagnostic/debug channel
3251 # The chip has multiple serial channels which may be
3252 # used for different things on different platforms. This
3253 # interface allows a platform to indicate that the specified
3254 # serial port can be used as a diagnostic and/or debug channel.
3256 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3257 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3258 # This value cannot be modified here.
3262 # The following properties are affected by this value
3265 # UART5 available as diagnostic/debug channel
3266 # The chip has multiple serial channels which may be
3267 # used for different things on different platforms. This
3268 # interface allows a platform to indicate that the specified
3269 # serial port can be used as a diagnostic and/or debug channel.
3271 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3272 # No options implement this inferface
3273 # This value cannot be modified here.
3279 # This HAL platform package provides generic
3280 # support for the Ka-Ro electronics TX51 module.
3282 cdl_package CYGPKG_HAL_ARM_TX51KARO {
3283 # Packages cannot be added or removed, nor can their version be changed,
3284 # simply by editing their value. Instead the appropriate configuration
3285 # should be used to perform these actions.
3287 # This value cannot be modified here.
3289 # Current value: 1 current
3290 # Requires: CYGINT_ISO_CTYPE
3291 # CYGINT_ISO_CTYPE == 1
3293 # Requires: CYGBLD_BUILD_REDBOOT == 1
3294 # CYGBLD_BUILD_REDBOOT == 1
3300 # The only startup type allowed is ROMRAM, since this will allow
3301 # the program to exist in ROM, but be copied to RAM during startup
3302 # which is required to boot from NAND flash.
3304 cdl_component CYG_HAL_STARTUP {
3306 # No user value, uncomment the following line to provide one.
3308 # value_source default
3309 # Default value: ROMRAM
3310 # Legal values: "ROMRAM"
3312 # The following properties are affected by this value
3313 # option CYGSEM_HAL_ROM_MONITOR
3314 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3315 # option CYGSEM_HAL_ROM_MONITOR
3316 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3317 # option CYGSEM_HAL_USE_ROM_MONITOR
3318 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3319 # option CYGSEM_HAL_USE_ROM_MONITOR
3320 # Requires: CYG_HAL_STARTUP == "RAM"
3321 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3322 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3323 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3324 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3325 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3326 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3327 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3328 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3329 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3330 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3331 # option CYGPRI_REDBOOT_ROM_MONITOR
3332 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3333 # option CYGPRI_REDBOOT_ROM_MONITOR
3334 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3337 # Diagnostic serial port baud rate
3338 # This option selects the baud rate used for the console port.
3339 # Note: this should match the value chosen for the GDB port if the
3340 # console and GDB port are the same.
3342 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3344 # No user value, uncomment the following line to provide one.
3346 # value_source default
3347 # Default value: 115200
3348 # Legal values: 9600 19200 38400 57600 115200
3351 # GDB serial port baud rate
3352 # This option selects the baud rate used for the GDB port.
3353 # Note: this should match the value chosen for the console port if the
3354 # console and GDB port are the same.
3356 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3358 # No user value, uncomment the following line to provide one.
3360 # value_source default
3361 # Default value: 115200
3362 # Legal values: 9600 19200 38400 57600 115200
3365 # Number of communication channels on the TX51
3367 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3368 # Calculated value: 3
3372 # The following properties are affected by this value
3373 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3374 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3375 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3376 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3377 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3378 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3382 # The TX51 provides access to three serial ports. This option
3383 # chooses which port will be used to connect to a host
3386 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3387 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3388 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3392 # No user value, uncomment the following line to provide one.
3394 # value_source default
3396 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3397 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3400 # Default console channel.
3402 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3403 # Calculated value: 0
3406 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3407 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3409 # The following properties are affected by this value
3410 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3411 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3414 # Console serial port
3415 # The TX51 provides access to three serial ports. This option
3416 # chooses which port will be used for console output.
3418 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3419 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3420 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3424 # No user value, uncomment the following line to provide one.
3426 # value_source default
3427 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3428 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3430 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3431 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3434 # Ka-Ro electronics TX51 module build options
3435 # Package specific build options including control over
3436 # compiler flags used only in building this package,
3437 # and details of which tests are built.
3439 cdl_component CYGPKG_HAL_ARM_TX51_OPTIONS {
3440 # There is no associated value.
3441 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3442 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3448 # This option specifies the SDRAM size of the TX51 module.
3450 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_SIZE {
3452 # No user value, uncomment the following line to provide one.
3453 # user_value 0x08000000
3454 # value_source default
3455 # Default value: 0x08000000
3456 # Legal values: 0x10000000 0x08000000 0x04000000
3460 # This option specifies the SDRAM clock in MHz of the TX51 module.
3462 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_CLK {
3464 # No user value, uncomment the following line to provide one.
3466 # value_source default
3467 # Default value: 166
3468 # Legal values: 166 200
3472 # This option specifies the CPU clock in MHz of the TX51 module.
3474 cdl_option CYGNUM_HAL_ARM_TX51_CPU_CLK {
3476 # No user value, uncomment the following line to provide one.
3478 # value_source default
3479 # Default value: 800
3480 # Legal values: 600 800
3483 # Enable low level debugging with LED
3484 # This option enables low level debugging by blink codes
3485 # of the LED on STK5.
3487 cdl_option CYGOPT_HAL_ARM_TX51_DEBUG {
3489 # No user value, uncomment the following line to provide one.
3491 # value_source default
3492 # Default value: false
3493 # false (unknown) == 0
3497 # Additional compiler flags
3498 # This option modifies the set of compiler flags for
3499 # building the TX51 HAL. These flags are used in addition
3500 # to the set of global flags.
3502 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_ADD {
3504 # No user value, uncomment the following line to provide one.
3506 # value_source default
3510 # Suppressed compiler flags
3511 # This option modifies the set of compiler flags for
3512 # building the TX51 HAL. These flags are removed from
3513 # the set of global flags if present.
3515 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_REMOVE {
3517 # No user value, uncomment the following line to provide one.
3519 # value_source default
3523 # Show a splash screen from the FIS partition: 'logo'
3524 # When this option is enabled, RedBoot will look for a flash partition
3525 # named 'logo' and display the contents of this partition as initial
3528 cdl_option CYGHWR_MX51_LCD_LOGO {
3529 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3530 # CYGPKG_DEVS_IMX_IPU == current
3534 # No user value, uncomment the following line to provide one.
3536 # value_source default
3543 cdl_component CYGHWR_MEMORY_LAYOUT {
3544 # Calculated value: "arm_tx51_romram"
3546 # Current_value: arm_tx51_romram
3550 # Memory layout linker script fragment
3552 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3553 # Calculated value: "<pkgconf/mlt_arm_tx51_romram.ldi>"
3555 # Current_value: <pkgconf/mlt_arm_tx51_romram.ldi>
3558 # Memory layout header file
3560 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3561 # Calculated value: "<pkgconf/mlt_arm_tx51_romram.h>"
3563 # Current_value: <pkgconf/mlt_arm_tx51_romram.h>
3572 # Common types and useful macros.
3573 # Tracing and assertion facilities.
3574 # Package startup options.
3576 cdl_package CYGPKG_INFRA {
3577 # Packages cannot be added or removed, nor can their version be changed,
3578 # simply by editing their value. Instead the appropriate configuration
3579 # should be used to perform these actions.
3581 # This value cannot be modified here.
3583 # Current value: 1 current
3585 # The following properties are affected by this value
3586 # package CYGPKG_HAL
3587 # Requires: CYGPKG_INFRA
3588 # component CYGBLD_BUILD_REDBOOT
3589 # Requires: CYGPKG_INFRA
3594 # The eCos source code contains a significant amount of
3595 # internal debugging support, in the form of assertions and
3597 # Assertions check at runtime that various conditions are as
3598 # expected; if not, execution is halted.
3599 # Tracing takes the form of text messages that are output
3600 # whenever certain events occur, or whenever functions are
3602 # The most important property of these checks and messages is
3603 # that they are not required for the program to run.
3604 # It is prudent to develop software with assertions enabled,
3605 # but disable them when making a product release, thus
3606 # removing the overhead of that checking.
3607 # It is possible to enable assertions and tracing
3609 # There are also options controlling the exact behaviour of
3610 # the assertion and tracing facilities, thus giving users
3611 # finer control over the code and data size requirements.
3613 cdl_component CYGPKG_INFRA_DEBUG {
3615 # No user value, uncomment the following line to provide one.
3617 # value_source default
3620 # The following properties are affected by this value
3621 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3622 # ActiveIf: CYGPKG_INFRA_DEBUG
3627 # If this option is defined, asserts in the code are tested.
3628 # Assert functions (CYG_ASSERT()) are defined in
3629 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3630 # If it is not defined, these result in no additional
3631 # object code and no checking of the asserted conditions.
3633 cdl_component CYGDBG_USE_ASSERTS {
3634 # This option is not active
3635 # The parent CYGPKG_INFRA_DEBUG is disabled
3638 # No user value, uncomment the following line to provide one.
3640 # value_source default
3642 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3643 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3646 # The following properties are affected by this value
3647 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3648 # Requires: CYGDBG_USE_ASSERTS
3649 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3650 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3655 # This option allows individual control of preconditions.
3656 # A precondition is one type of assert, which it is
3657 # useful to control separately from more general asserts.
3658 # The function is CYG_PRECONDITION(condition,msg).
3660 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3661 # This option is not active
3662 # The parent CYGDBG_USE_ASSERTS is not active
3665 # No user value, uncomment the following line to provide one.
3667 # value_source default
3672 # This option allows individual control of postconditions.
3673 # A postcondition is one type of assert, which it is
3674 # useful to control separately from more general asserts.
3675 # The function is CYG_POSTCONDITION(condition,msg).
3677 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3678 # This option is not active
3679 # The parent CYGDBG_USE_ASSERTS is not active
3682 # No user value, uncomment the following line to provide one.
3684 # value_source default
3689 # This option allows individual control of loop invariants.
3690 # A loop invariant is one type of assert, which it is
3691 # useful to control separately from more general asserts,
3692 # particularly since a loop invariant is typically evaluated
3693 # a great many times when used correctly.
3694 # The function is CYG_LOOP_INVARIANT(condition,msg).
3696 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3697 # This option is not active
3698 # The parent CYGDBG_USE_ASSERTS is not active
3701 # No user value, uncomment the following line to provide one.
3703 # value_source default
3708 # All assertions within eCos contain a text message
3709 # which should give some information about the condition
3711 # These text messages will end up being embedded in the
3712 # application image and hence there is a significant penalty
3713 # in terms of image size.
3714 # It is possible to suppress the use of these messages by
3715 # disabling this option.
3716 # This results in smaller code size, but there is less
3717 # human-readable information if an assertion actually gets
3720 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3721 # This option is not active
3722 # The parent CYGDBG_USE_ASSERTS is not active
3725 # No user value, uncomment the following line to provide one.
3727 # value_source default
3733 # If this option is defined, tracing operations
3734 # result in output or logging, depending on other options.
3735 # This may have adverse effects on performance, if the time
3736 # taken to output message overwhelms the available CPU
3737 # power or output bandwidth.
3738 # Trace functions (CYG_TRACE()) are defined in
3739 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3740 # If it is not defined, these result in no additional
3741 # object code and no trace information.
3743 cdl_component CYGDBG_USE_TRACING {
3744 # This option is not active
3745 # The parent CYGPKG_INFRA_DEBUG is disabled
3748 # No user value, uncomment the following line to provide one.
3750 # value_source default
3752 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3753 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3756 # The following properties are affected by this value
3757 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3758 # ActiveIf: CYGDBG_USE_TRACING
3759 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3760 # ActiveIf: CYGDBG_USE_TRACING
3761 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3762 # ActiveIf: CYGDBG_USE_TRACING
3763 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3764 # ActiveIf: CYGDBG_USE_TRACING
3765 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3766 # ActiveIf: CYGDBG_USE_TRACING
3770 # Trace function reports
3771 # This option allows individual control of
3772 # function entry/exit tracing, independent of
3773 # more general tracing output.
3774 # This may be useful to remove clutter from a
3777 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3778 # This option is not active
3779 # The parent CYGDBG_USE_TRACING is not active
3780 # The parent CYGDBG_USE_TRACING is disabled
3783 # No user value, uncomment the following line to provide one.
3785 # value_source default
3790 # All trace calls within eCos contain a text message
3791 # which should give some information about the circumstances.
3792 # These text messages will end up being embedded in the
3793 # application image and hence there is a significant penalty
3794 # in terms of image size.
3795 # It is possible to suppress the use of these messages by
3796 # disabling this option.
3797 # This results in smaller code size, but there is less
3798 # human-readable information available in the trace output,
3799 # possibly only filenames and line numbers.
3801 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3802 # This option is not active
3803 # The parent CYGDBG_USE_TRACING is not active
3804 # The parent CYGDBG_USE_TRACING is disabled
3807 # No user value, uncomment the following line to provide one.
3809 # value_source default
3814 # Trace output implementations
3816 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3817 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3818 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3819 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3820 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3821 # This option is not active
3822 # The parent CYGPKG_INFRA_DEBUG is disabled
3824 # This value cannot be modified here.
3828 # The following properties are affected by this value
3829 # component CYGDBG_USE_ASSERTS
3830 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3831 # component CYGDBG_USE_TRACING
3832 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3836 # A null output module which is useful when
3837 # debugging interactively; the output routines
3838 # can be breakpointed rather than have them actually
3839 # 'print' something.
3841 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3842 # This option is not active
3843 # The parent CYGPKG_INFRA_DEBUG is disabled
3846 # No user value, uncomment the following line to provide one.
3848 # value_source default
3853 # An output module which produces simple output
3854 # from tracing and assertion events.
3856 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3857 # This option is not active
3858 # The parent CYGPKG_INFRA_DEBUG is disabled
3861 # No user value, uncomment the following line to provide one.
3863 # value_source default
3868 # An output module which produces fancy output
3869 # from tracing and assertion events.
3871 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3872 # This option is not active
3873 # The parent CYGPKG_INFRA_DEBUG is disabled
3876 # No user value, uncomment the following line to provide one.
3878 # value_source default
3883 # An output module which buffers output
3884 # from tracing and assertion events. The stored
3885 # messages are output when an assert fires, or
3886 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3888 # Of course, there will only be stored messages
3889 # if tracing per se (CYGDBG_USE_TRACING)
3892 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3893 # This option is not active
3894 # The parent CYGPKG_INFRA_DEBUG is disabled
3897 # No user value, uncomment the following line to provide one.
3899 # value_source default
3905 # The size of the trace buffer. This counts the number
3906 # of trace records stored. When the buffer fills it
3907 # either wraps, stops recording, or generates output.
3909 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3910 # This option is not active
3911 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3912 # ActiveIf constraint: CYGDBG_USE_TRACING
3913 # CYGDBG_USE_TRACING == 0
3917 # No user value, uncomment the following line to provide one.
3919 # value_source default
3921 # Legal values: 5 to 65535
3924 # Wrap trace buffer when full
3925 # When the trace buffer has filled with records it
3926 # starts again at the beginning. Hence only the last
3927 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3930 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3931 # This option is not active
3932 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3933 # ActiveIf constraint: CYGDBG_USE_TRACING
3934 # CYGDBG_USE_TRACING == 0
3938 # No user value, uncomment the following line to provide one.
3940 # value_source default
3944 # Halt trace buffer when full
3945 # When the trace buffer has filled with records it
3946 # stops recording. Hence only the first
3947 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3950 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3951 # This option is not active
3952 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3953 # ActiveIf constraint: CYGDBG_USE_TRACING
3954 # CYGDBG_USE_TRACING == 0
3958 # No user value, uncomment the following line to provide one.
3960 # value_source default
3964 # Print trace buffer when full
3965 # When the trace buffer has filled with records it
3966 # prints the contents of the buffer. The buffer is then
3967 # emptied and the system continues.
3969 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3970 # This option is not active
3971 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3972 # ActiveIf constraint: CYGDBG_USE_TRACING
3973 # CYGDBG_USE_TRACING == 0
3977 # No user value, uncomment the following line to provide one.
3979 # value_source default
3983 # Print trace buffer on assert fail
3984 # When an assertion fails the trace buffer will be
3985 # printed to the default diagnostic device.
3987 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3988 # This option is not active
3989 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3990 # ActiveIf constraint: CYGDBG_USE_TRACING
3991 # CYGDBG_USE_TRACING == 0
3995 # No user value, uncomment the following line to provide one.
3997 # value_source default
4002 # Use function names
4003 # All trace and assert calls within eCos contain a
4004 # reference to the builtin macro '__PRETTY_FUNCTION__',
4005 # which evaluates to a string containing
4006 # the name of the current function.
4007 # This is useful when reading a trace log.
4008 # It is possible to suppress the use of the function name
4009 # by disabling this option.
4010 # This results in smaller code size, but there is less
4011 # human-readable information available in the trace output,
4012 # possibly only filenames and line numbers.
4014 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4015 # This option is not active
4016 # The parent CYGPKG_INFRA_DEBUG is disabled
4019 # No user value, uncomment the following line to provide one.
4021 # value_source default
4027 # Some packages require a startup routine to be called.
4028 # This can be carried out by application code, by supplying
4029 # a routine called cyg_package_start() which calls the
4030 # appropriate package startup routine(s).
4031 # Alternatively, this routine can be constructed automatically
4032 # and configured to call the startup routines of your choice.
4034 cdl_component CYGPKG_INFRA_STARTUP {
4035 # There is no associated value.
4039 # Start uITRON subsystem
4040 # Generate a call to initialize the
4041 # uITRON compatibility subsystem
4042 # within the system version of cyg_package_start().
4043 # This enables compatibility with uITRON.
4044 # You must configure uITRON with the correct tasks before
4045 # starting the uItron subsystem.
4046 # If this is disabled, and you want to use uITRON,
4047 # you must call cyg_uitron_start() from your own
4048 # cyg_package_start() or cyg_userstart().
4050 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4051 # This option is not active
4052 # ActiveIf constraint: CYGPKG_UITRON
4053 # CYGPKG_UITRON (unknown) == 0
4057 # No user value, uncomment the following line to provide one.
4059 # value_source default
4061 # Requires: CYGPKG_UITRON
4062 # CYGPKG_UITRON (unknown) == 0
4067 # Smaller slower memcpy()
4068 # Enabling this option causes the implementation of
4069 # the standard memcpy() routine to reduce code
4070 # size at the expense of execution speed. This
4071 # option is automatically enabled with the use of
4072 # the -Os option to the compiler. Also note that
4073 # the compiler will try to use its own builtin
4074 # version of memcpy() if possible, ignoring the
4075 # implementation in this package, unless given
4076 # the -fno-builtin compiler option.
4078 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4080 # No user value, uncomment the following line to provide one.
4082 # value_source default
4086 # Smaller slower memset()
4087 # Enabling this option causes the implementation of
4088 # the standard memset() routine to reduce code
4089 # size at the expense of execution speed. This
4090 # option is automatically enabled with the use of
4091 # the -Os option to the compiler. Also note that
4092 # the compiler will try to use its own builtin
4093 # version of memset() if possible, ignoring the
4094 # implementation in this package, unless given
4095 # the -fno-builtin compiler option.
4097 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4099 # No user value, uncomment the following line to provide one.
4101 # value_source default
4105 # Provide empty C++ delete functions
4106 # To deal with virtual destructors, where the correct delete()
4107 # function must be called for the derived class in question, the
4108 # underlying delete is called when needed, from destructors. This
4109 # is regardless of whether the destructor is called by delete itself.
4110 # So there is a reference to delete() from all destructors. The
4111 # default builtin delete() attempts to call free() if there is
4112 # one defined. So, if you have destructors, and you have free(),
4113 # as in malloc() and free(), any destructor counts as a reference
4114 # to free(). So the dynamic memory allocation code is linked
4115 # in regardless of whether it gets explicitly called. This
4116 # increases code and data size needlessly.
4117 # To defeat this undesirable behaviour, we define empty versions
4118 # of delete and delete. But doing this prevents proper use
4119 # of dynamic memory in C++ programs via C++'s new and delete
4121 # Therefore, this option is provided
4122 # for explicitly disabling the provision of these empty functions,
4123 # so that new and delete can be used, if that is what is required.
4125 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4127 # No user value, uncomment the following line to provide one.
4129 # value_source default
4133 # Threshold for valid number of delete calls
4134 # Some users don't know about the empty delete function and then
4135 # wonder why their C++ classes are leaking memory. If
4136 # INFRA_DEBUG is enabled we keep a counter for the number of
4137 # times delete is called. If it goes above this threshold we throw
4138 # an assertion failure. This should point heavy users of
4139 # delete in the right direction without upsetting those who want
4140 # an empty delete function.
4142 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4143 # This option is not active
4144 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4145 # CYGPKG_INFRA_DEBUG == 0
4149 # No user value, uncomment the following line to provide one.
4151 # value_source default
4152 # Default value: 100
4155 # Provide dummy abort() function
4156 # This option controls the inclusion of a dummy abort() function.
4157 # Parts of the C and C++ compiler runtime systems contain references
4158 # to abort(), particulary in the C++ exception handling code. It is
4159 # not possible to eliminate these references, so this dummy function
4160 # in included to satisfy them. It is not expected that this function
4161 # will ever be called, so its current behaviour is to simply loop.
4163 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4165 # No user value, uncomment the following line to provide one.
4167 # value_source default
4168 # Default value: CYGINT_ISO_EXIT == 0
4169 # CYGINT_ISO_EXIT == 0
4171 # Requires: !CYGINT_ISO_EXIT
4172 # CYGINT_ISO_EXIT == 0
4176 # Reset platform at end of test case execution
4177 # If this option is set then test case programs will reset the platform
4178 # when they terminate, as opposed to the default which is to just hang
4181 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4183 # No user value, uncomment the following line to provide one.
4185 # value_source default
4189 # Provide dummy strlen() function
4190 # This option controls the inclusion of a dummy strlen() function.
4191 # Parts of the C and C++ compiler runtime systems contain references
4192 # to strlen(), particulary in the C++ exception handling code. It is
4193 # not possible to eliminate these references, so this dummy function
4194 # in included to satisfy them. While it is not expected that this function
4195 # will ever be called, it is functional but uses the simplest, smallest
4196 # algorithm. There is a faster version of strlen() in the C library.
4198 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4200 # No user value, uncomment the following line to provide one.
4202 # value_source default
4203 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4204 # CYGINT_ISO_STRING_STRFUNCS == 1
4206 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4207 # CYGINT_ISO_STRING_STRFUNCS == 1
4211 # Make all compiler warnings show as errors
4212 # Enabling this option will cause all compiler warnings to show
4213 # as errors and bring the library build to a halt. This is used
4214 # to ensure that the code base is warning free, and thus ensure
4215 # that newly introduced warnings stand out and get fixed before
4216 # they show up as weird run-time behavior.
4218 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4223 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4224 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4227 # The following properties are affected by this value
4228 # option CYGBLD_GLOBAL_CFLAGS
4229 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4232 # Make compiler and assembler communicate by pipe
4233 # Enabling this option will cause the compiler to feed the
4234 # assembly output the the assembler via a pipe instead of
4235 # via a temporary file. This normally reduces the build
4238 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4243 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4244 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4248 # Infra build options
4249 # Package specific build options including control over
4250 # compiler flags used only in building this package.
4252 cdl_component CYGPKG_INFRA_OPTIONS {
4253 # There is no associated value.
4257 # Additional compiler flags
4258 # This option modifies the set of compiler flags for
4259 # building the eCos infra package. These flags are used
4260 # in addition to the set of global flags.
4262 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4264 # No user value, uncomment the following line to provide one.
4265 # user_value "-fno-rtti -Woverloaded-virtual"
4266 # value_source default
4267 # Default value: "-fno-rtti -Woverloaded-virtual"
4270 # Suppressed compiler flags
4271 # This option modifies the set of compiler flags for
4272 # building the eCos infra package. These flags are removed from
4273 # the set of global flags if present.
4275 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4277 # No user value, uncomment the following line to provide one.
4278 # user_value -Wno-pointer-sign
4279 # value_source default
4280 # Default value: -Wno-pointer-sign
4283 # Suppressed linker flags
4284 # This option modifies the set of linker flags for
4285 # building the eCos infra package tests. These flags are removed from
4286 # the set of global flags if present.
4288 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4290 # No user value, uncomment the following line to provide one.
4291 # user_value -Wl,--gc-sections
4292 # value_source default
4293 # Default value: -Wl,--gc-sections
4296 # Additional linker flags
4297 # This option modifies the set of linker flags for
4298 # building the eCos infra package tests. These flags are added to
4299 # the set of global flags if present.
4301 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4303 # No user value, uncomment the following line to provide one.
4304 # user_value -Wl,--fatal-warnings
4305 # value_source default
4306 # Default value: -Wl,--fatal-warnings
4309 # Infra package tests
4311 cdl_component CYGPKG_INFRA_TESTS {
4312 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4314 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4318 # Number of times a test runs
4319 # This option controls the number of times tests will execute their
4320 # basic function. Not all tests will honor this setting, but those
4321 # that do will execute the test N times before terminating. A value
4322 # less than 0 indicates to run forever.
4324 cdl_option CYGNUM_TESTS_RUN_COUNT {
4326 # No user value, uncomment the following line to provide one.
4328 # value_source default
4335 # Redboot ROM monitor
4336 # doc: ref/redboot.html
4337 # This package supports the Redboot [stand-alone debug monitor]
4338 # using eCos as the underlying board support mechanism.
4340 cdl_package CYGPKG_REDBOOT {
4341 # Packages cannot be added or removed, nor can their version be changed,
4342 # simply by editing their value. Instead the appropriate configuration
4343 # should be used to perform these actions.
4345 # This value cannot be modified here.
4347 # Current value: 1 current
4348 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4349 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4352 # The following properties are affected by this value
4353 # component CYGPKG_REDBOOT_ARM_OPTIONS
4354 # ActiveIf: CYGPKG_REDBOOT
4355 # component CYGPKG_REDBOOT_HAL_OPTIONS
4356 # ActiveIf: CYGPKG_REDBOOT
4357 # component CYGPKG_REDBOOT_HAL_TX51_OPTIONS
4358 # ActiveIf: CYGPKG_REDBOOT
4359 # option CYGSEM_IO_ETH_DRIVERS_WARN
4360 # ActiveIf: CYGPKG_REDBOOT
4364 # Include support for ELF file format
4366 cdl_component CYGSEM_REDBOOT_ELF {
4368 # No user value, uncomment the following line to provide one.
4370 # value_source default
4375 # Use the virtual address in the ELF headers
4376 # The ELF headers contain both a virtual and a physical address
4377 # for where code/data should be loaded. By default the physical
4378 # address is used but sometimes it is necassary to use the
4379 # virtual address because of bugy toolchains
4381 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4383 # No user value, uncomment the following line to provide one.
4385 # value_source default
4390 # Methods of loading images using redboot
4392 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4393 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4394 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4395 # This value cannot be modified here.
4399 # The following properties are affected by this value
4400 # component CYGBLD_BUILD_REDBOOT
4401 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4404 # Build Redboot ROM ELF image
4405 # This option enables the building of the Redboot ELF image.
4406 # The image may require further relocation or symbol
4407 # stripping before being converted to a binary image.
4408 # This is handled by a rule in the target CDL.
4410 cdl_component CYGBLD_BUILD_REDBOOT {
4412 # No user value, uncomment the following line to provide one.
4414 # The inferred value should not be edited directly.
4416 # value_source inferred
4418 # Requires: CYGPKG_INFRA
4419 # CYGPKG_INFRA == current
4421 # Requires: CYGPKG_ISOINFRA
4422 # CYGPKG_ISOINFRA == current
4424 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4425 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4427 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4428 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4430 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4431 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4433 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4434 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4436 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4437 # CYGINT_ISO_STRING_MEMFUNCS == 1
4439 # Requires: CYGINT_ISO_STRING_STRFUNCS
4440 # CYGINT_ISO_STRING_STRFUNCS == 1
4442 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4443 # CYGINT_REDBOOT_LOAD_METHOD == 2
4446 # The following properties are affected by this value
4447 # package CYGPKG_HAL_ARM_TX51KARO
4448 # Requires: CYGBLD_BUILD_REDBOOT == 1
4449 # option CYGBLD_BUILD_REDBOOT_BIN
4450 # ActiveIf: CYGBLD_BUILD_REDBOOT
4454 # Include GDB support in RedBoot
4455 # RedBoot normally includes support for the GDB debugging
4456 # protocols. This option allows this to be disabled which
4457 # may yield a substantial savings in terms of code and memory
4460 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4461 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4462 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4467 # The inferred value should not be edited directly.
4471 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4472 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4474 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4475 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4479 # Threads debugging support
4480 # Enabling this option will include special code in the
4481 # GDB stubs to support debugging of threaded programs. In
4482 # the case of eCos programs, this support allows GDB to
4483 # have complete access to the eCos threads in the
4486 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4487 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4488 # CYG_HAL_STARTUP == ROMRAM
4492 # No user value, uncomment the following line to provide one.
4494 # value_source default
4496 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4497 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4501 # Customized version string
4502 # Use this option to define a customized version "string" for
4503 # RedBoot. Note: this value is only cosmetic, displayed by the
4504 # "version" command, but is useful for providing site specific
4505 # information about the RedBoot configuration.
4507 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4509 # No user value, uncomment the following line to provide one.
4511 # The inferred value should not be edited directly.
4512 inferred_value 1 "Ka-Ro 2010-01-06"
4513 # value_source inferred
4514 # Default value: 0 0
4517 # Enable command line editing
4518 # If this option is non-zero, RedBoot will remember the
4519 # last N command lines. These lines may be reused.
4520 # Enabling this history will also enable rudimentary
4521 # editting of the lines themselves.
4523 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4525 # No user value, uncomment the following line to provide one.
4527 # value_source default
4530 # The following properties are affected by this value
4531 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4532 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4533 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4534 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4537 # Enable command line editing using ANSI arrows, etc
4538 # If this option is enabled, RedBoot will accept standard ANSI key
4539 # sequences for cursor movement (along with the emacs style keys).
4541 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4542 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4543 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4547 # No user value, uncomment the following line to provide one.
4549 # value_source default
4553 # Enable history command and expansion
4554 # Enabling this option will allow RedBoot to provide a
4555 # history command to list previous commands. Also enables
4556 # history expansion via '!' character similar to bash
4559 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4561 # No user value, uncomment the following line to provide one.
4563 # value_source default
4565 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4566 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4570 # Number of unique RAM segments on platform
4571 # Change this option to be the number of memory segments which are
4572 # supported by the platform. If the value is greater than 1, then
4573 # a platform specific function must provide information about the
4574 # additional segments.
4576 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4578 # No user value, uncomment the following line to provide one.
4580 # value_source default
4584 # Include support gzip/zlib decompression
4586 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4587 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4588 # CYGPKG_COMPRESS_ZLIB == current
4592 # No user value, uncomment the following line to provide one.
4594 # value_source default
4597 # The following properties are affected by this value
4598 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4599 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4603 # Size of zlib decompression buffer
4604 # This is the size of the buffer filled with incoming data
4605 # during load before calls are made to the decompressor
4606 # function. For ethernet downloads this can be made bigger
4607 # (at the cost of memory), but for serial downloads on slow
4608 # processors it may be necessary to reduce the size to
4609 # avoid serial overruns. zlib appears to bail out if less
4610 # than five bytes are available initially so this is the
4613 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4615 # No user value, uncomment the following line to provide one.
4617 # value_source default
4619 # Legal values: 5 to 256
4622 # Support compression of Flash images
4623 # This CDL indicates whether flash images can
4624 # be decompressed from gzip/zlib format into RAM.
4626 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4627 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4628 # CYGPKG_REDBOOT_FLASH == 1
4630 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4631 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4632 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4635 # Calculated value: 1
4640 # Include GZIP uncompress command
4641 # Enable this option to include a 'gunzip' command
4642 # to uncompress GZIP compressed data.
4644 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4646 # No user value, uncomment the following line to provide one.
4648 # value_source default
4652 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4653 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4655 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4657 # No user value, uncomment the following line to provide one.
4659 # The inferred value should not be edited directly.
4661 # value_source inferred
4664 # The following properties are affected by this value
4665 # option CYGPRI_REDBOOT_ZLIB_FLASH
4666 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4670 # Include support for xyzModem downloads
4671 # doc: ref/download-command.html
4673 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4675 # No user value, uncomment the following line to provide one.
4677 # value_source default
4680 # The following properties are affected by this value
4681 # option CYGPKG_REDBOOT_CFLAGS_ADD
4682 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4685 # Additional compiler flags
4686 # This option modifies the set of compiler flags for
4687 # building the eCos infra package. These flags are used
4688 # in addition to the set of global flags.
4690 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4691 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4692 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4696 # No user value, uncomment the following line to provide one.
4697 # user_value -Wno-inline
4698 # value_source default
4699 # Default value: -Wno-inline
4702 # Allow the load-command write into Flash.
4703 # Write images direct to Flash via the load command.
4704 # We assume anything which is invalid RAM is flash, hence
4705 # the requires statement
4707 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4708 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4709 # CYGPKG_REDBOOT_FLASH == 1
4713 # No user value, uncomment the following line to provide one.
4715 # value_source default
4717 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4718 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4722 # Include MS Windows CE support
4723 # doc: ref/wince.html
4724 # This option enables MS Windows CE EShell support
4725 # and Windows CE .BIN images support
4727 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4734 # Include support for MXC USB downloads
4736 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4738 # No user value, uncomment the following line to provide one.
4740 # value_source default
4744 # Include support for i.MX USB OTG downloads
4746 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4748 # No user value, uncomment the following line to provide one.
4750 # value_source default
4754 # Include POSIX checksum command
4755 # doc: ref/cksum-command.html
4757 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4759 # No user value, uncomment the following line to provide one.
4761 # value_source default
4765 # Include memory fill command
4766 # doc: ref/mfill-command.html
4768 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4770 # No user value, uncomment the following line to provide one.
4772 # value_source default
4776 # Include memory compare command
4777 # doc: ref/mcmp-command.html
4779 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4781 # No user value, uncomment the following line to provide one.
4783 # value_source default
4787 # Include memory copy command
4788 # doc: ref/mcopy-command.html
4790 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4792 # No user value, uncomment the following line to provide one.
4794 # value_source default
4798 # Include memory dump command
4799 # doc: ref/dump-command.html
4801 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4803 # No user value, uncomment the following line to provide one.
4805 # value_source default
4809 # Include cache command
4810 # doc: ref/cache-command.html
4812 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4814 # No user value, uncomment the following line to provide one.
4816 # value_source default
4820 # Include exec command
4821 # doc: ref/exec-command.html
4823 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4825 # No user value, uncomment the following line to provide one.
4827 # value_source default
4830 # The following properties are affected by this value
4831 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4832 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4835 # Include I/O Memory commands 'iopeek' and 'iopoke'
4837 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4839 # No user value, uncomment the following line to provide one.
4841 # value_source default
4845 # Granularity of timer/ticks
4846 # This option controls the granularity of the timers.
4847 # Faster CPUs can afford higher granularity (lower values)
4848 # which should give higher network performance since the stack
4851 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4853 # No user value, uncomment the following line to provide one.
4855 # value_source default
4856 # Default value: 250
4857 # Legal values: 10 25 50 100 250 500 1000
4860 # Redboot Networking
4861 # This option includes networking support in RedBoot.
4863 cdl_component CYGPKG_REDBOOT_NETWORKING {
4864 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4865 # CYGPKG_IO_ETH_DRIVERS == current
4869 # No user value, uncomment the following line to provide one.
4871 # value_source default
4874 # The following properties are affected by this value
4875 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4876 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4880 # Print net debug information
4881 # This option is overriden by the configuration stored
4884 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4886 # No user value, uncomment the following line to provide one.
4888 # value_source default
4892 # Support TFTP for download
4893 # This option enables the use of the TFTP protocol for
4896 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4898 # No user value, uncomment the following line to provide one.
4900 # value_source default
4904 # Support HTTP for download
4905 # This option enables the use of the HTTP protocol for
4908 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4915 # Default IP address
4916 # This IP address is the default used by RedBoot if
4917 # a BOOTP/DHCP server does not respond. The numbers
4918 # should be separated by *commas*, and not dots. If
4919 # an IP address is configured into the Flash
4920 # configuration, that will be used in preference.
4922 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4924 # No user value, uncomment the following line to provide one.
4926 # value_source default
4927 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4928 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4933 # Do not try to use BOOTP
4934 # By default Redboot tries to use BOOTP to get an IP
4935 # address. If there's no BOOTP server on your network
4936 # use this option to avoid to wait until the
4937 # timeout. This option is overriden by the
4938 # configuration stored in flash.
4940 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4941 # This option is not active
4942 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4945 # No user value, uncomment the following line to provide one.
4947 # value_source default
4951 # Default bootp server
4952 # This IP address is the default server
4953 # address used by RedBoot if a BOOTP/DHCP
4954 # server does not respond. The numbers should
4955 # be separated by *commas*, and not dots. If
4956 # an IP address is configured into the Flash
4957 # configuration, that will be used in
4960 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4961 # This option is not active
4962 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4965 # No user value, uncomment the following line to provide one.
4967 # value_source default
4968 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4969 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4974 # Use DHCP to get IP information
4975 # Use DHCP protocol to obtain pertinent IP addresses, such
4976 # as the client, server, gateway, etc.
4978 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4980 # No user value, uncomment the following line to provide one.
4982 # value_source default
4985 # The following properties are affected by this value
4986 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4987 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4990 # Use a gateway for non-local IP traffic
4991 # Enabling this option will allow the RedBoot networking
4992 # stack to use a [single] gateway to reach a non-local
4993 # IP address. If disabled, RedBoot will only be able to
4994 # reach nodes on the same subnet.
4996 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4998 # No user value, uncomment the following line to provide one.
5000 # value_source default
5002 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5003 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
5008 # Default gateway IP address
5009 # This IP address is the default used by RedBoot
5010 # if a BOOTP/DHCP server does not respond. The
5011 # numbers should be separated by *commas*, and
5012 # not dots. If an IP address is configured into
5013 # the Flash configuration, that will be used in
5016 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5018 # No user value, uncomment the following line to provide one.
5020 # value_source default
5021 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5022 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5026 # Default IP address mask
5027 # This IP address mask is the default used by
5028 # RedBoot if a BOOTP/DHCP server does not
5029 # respond. The numbers should be separated by
5030 # *commas*, and not dots. If an IP address is
5031 # configured into the Flash configuration, that
5032 # will be used in preference.
5034 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5036 # No user value, uncomment the following line to provide one.
5038 # value_source default
5039 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5040 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5045 # TCP port to listen for incoming connections
5046 # RedBoot will 'listen' on this port for incoming TCP
5047 # connections. This allows outside connections to be made
5048 # to the platform, either for GDB or RedBoot commands.
5050 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5052 # No user value, uncomment the following line to provide one.
5054 # value_source default
5055 # Default value: 9000
5058 # Number of [network] packet buffers
5059 # RedBoot may need to buffer network data to support
5060 # various connections. This option allows control
5061 # over the number of such buffered packets, and in
5062 # turn, controls the amount of memory used by RedBoot
5063 # (which is not available to user applications).
5064 # Each packet buffer takes up about 1514 bytes.
5065 # Note: there is little need to make this larger than
5068 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5070 # No user value, uncomment the following line to provide one.
5072 # value_source default
5074 # Legal values: 3 to 8
5078 # When this option is enabled, RedBoot will be built with
5079 # support for DNS, allowing use of hostnames on the command
5082 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5083 # This option is not active
5084 # ActiveIf constraint: CYGPKG_NS_DNS
5085 # CYGPKG_NS_DNS (unknown) == 0
5089 # No user value, uncomment the following line to provide one.
5091 # value_source default
5093 # Requires: !CYGPKG_NS_DNS_BUILD
5094 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5100 # This option sets the IP of the default DNS. The IP can be
5101 # changed at runtime as well.
5103 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5104 # This option is not active
5105 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5106 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5107 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5111 # No user value, uncomment the following line to provide one.
5112 # user_value 0.0.0.0
5113 # value_source default
5114 # Default value: 0.0.0.0
5117 # Timeout in DNS lookup
5118 # This option sets the timeout used when looking up an
5119 # address via the DNS. Default is 10 seconds.
5121 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5122 # This option is not active
5123 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5126 # No user value, uncomment the following line to provide one.
5128 # value_source default
5132 # Support the use of a domain name
5133 # This option controls if Redboot supports domain
5134 # names when performing DNS lookups
5136 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5137 # This option is not active
5138 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5141 # No user value, uncomment the following line to provide one.
5143 # value_source default
5148 # Default DNS domain
5149 # This option sets the default DNS domain name.
5150 # This value will be overwritten by the value in
5151 # flash or a domain returned by DHCP
5153 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5154 # This option is not active
5155 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5156 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5159 # No user value, uncomment the following line to provide one.
5161 # value_source default
5162 # Default value: 0 0
5165 # Get DNS domain from Flash
5166 # This option enables getting the domain name
5167 # from the flash configuration. This can later be
5168 # overwritten by a value learnt from DHCP
5170 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5171 # This option is not active
5172 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5173 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5174 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5175 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5179 # No user value, uncomment the following line to provide one.
5181 # value_source default
5185 # Use DNS domain from DHCP
5186 # This option enables the use of the domain name
5189 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5190 # This option is not active
5191 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5192 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5195 # No user value, uncomment the following line to provide one.
5197 # value_source default
5201 # BOOTP/DHCP DNS domain buffer size
5202 # This options sets the size of the static
5203 # buffer used by BOOTP/DHCP to store the DNS
5204 # domain name. The domain name will not be
5205 # set if the buffer is too small to hold it.
5207 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5208 # This option is not active
5209 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5210 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5213 # No user value, uncomment the following line to provide one.
5215 # value_source default
5221 # Default network device driver
5222 # This is the name of the default network device to use.
5224 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5225 # This option is not active
5226 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5227 # CYGHWR_NET_DRIVERS == 1
5231 # No user value, uncomment the following line to provide one.
5233 # value_source default
5234 # Default value: "\"\""
5237 # Initialize only one net device
5238 # This option tells RedBoot to stop initializing network
5239 # devices when it finds the first device which is
5240 # successfully initialized. The default behavior causes
5241 # all network devices to be initialized.
5243 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5244 # This option is not active
5245 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5246 # CYGHWR_NET_DRIVERS == 1
5250 # No user value, uncomment the following line to provide one.
5252 # value_source default
5257 # Let RedBoot use any I/O channel for its console.
5258 # If this option is enabled then RedBoot will attempt to use all
5259 # defined serial I/O channels for its console device. Once input
5260 # arrives at one of these channels then the console will use only
5263 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5265 # No user value, uncomment the following line to provide one.
5267 # The inferred value should not be edited directly.
5269 # value_source inferred
5273 # Let RedBoot adjust the baud rate of the serial console.
5274 # If this option is enabled then RedBoot will support commands
5275 # to set and query the baud rate on the selected console.
5277 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5278 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5279 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5283 # No user value, uncomment the following line to provide one.
5285 # value_source default
5289 # Run a platform specific startup function.
5290 # If this option is enabled then RedBoot will execute a platform
5291 # specific startup function before entering into its command line
5292 # processing. This allows the platform to perform any special
5293 # setups before RedBoot actually starts running. Note: the entire
5294 # RedBoot environment will already be initialized at this point.
5296 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5298 # No user value, uncomment the following line to provide one.
5300 # value_source default
5304 # Run a platform specific ESA validation function.
5305 # If this option is enabled then RedBoot will execute a platform
5306 # specific function to validate an ethernet ESA. This would be
5307 # useful if the address must conform to standards set by the
5308 # hardware manufacturer, etc.
5310 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5312 # No user value, uncomment the following line to provide one.
5314 # The inferred value should not be edited directly.
5316 # value_source inferred
5319 # The following properties are affected by this value
5320 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5321 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5322 # option CYGDAT_DEVS_ETH_ARM_TX51KARO_OUI
5323 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5326 # Maximum command line length
5327 # This option allows control over how long the CLI command line
5328 # should be. This space will be allocated statically
5329 # rather than from RedBoot's stack.
5331 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5333 # No user value, uncomment the following line to provide one.
5335 # The inferred value should not be edited directly.
5337 # value_source inferred
5338 # Default value: 256
5341 # Command processing idle timeout (ms)
5342 # This option controls the timeout period before the
5343 # command processing is considered 'idle'. Making this
5344 # number smaller will cause idle processing to take place
5345 # more often, etc. The default value of 10ms is a reasonable
5346 # tradeoff between responsiveness and overhead.
5348 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5350 # No user value, uncomment the following line to provide one.
5352 # value_source default
5356 # Validate RAM addresses during load
5357 # This option controls whether or not RedBoot will make
5358 # sure that memory being used by the "load" command is
5359 # in fact in user RAM. Leaving the option enabled makes
5360 # for a safer environment, but this check may not be valid
5361 # on all platforms, thus the ability to disable it.
5362 # ** Disable this only with great care **
5364 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5366 # No user value, uncomment the following line to provide one.
5368 # value_source default
5371 # The following properties are affected by this value
5372 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5373 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5376 # Allow RedBoot to support FLASH programming
5377 # If this option is enabled then RedBoot will provide commands
5378 # to manage images in FLASH memory. These images can be loaded
5379 # into memory for execution or executed in place.
5381 cdl_component CYGPKG_REDBOOT_FLASH {
5382 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5383 # CYGHWR_IO_FLASH_DEVICE == 1
5387 # No user value, uncomment the following line to provide one.
5389 # value_source default
5392 # The following properties are affected by this value
5393 # option CYGPRI_REDBOOT_ZLIB_FLASH
5394 # ActiveIf: CYGPKG_REDBOOT_FLASH
5395 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5396 # ActiveIf: CYGPKG_REDBOOT_FLASH
5400 # Byte order used to store info in flash.
5401 # This option controls the byte ordering used to store
5402 # the FIS directory info and flash config info.
5404 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5406 # No user value, uncomment the following line to provide one.
5407 # user_value NATURAL
5408 # value_source default
5409 # Default value: NATURAL
5410 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5413 # RedBoot Flash Image System support
5414 # doc: ref/flash-image-system.html
5415 # This option enables the Flash Image System commands
5416 # and support within RedBoot. If disabled, simple Flash
5417 # access commands such as "fis write" will still exist.
5418 # This option would be disabled for targets that need simple
5419 # FLASH manipulation, but do not have the need or space for
5420 # complete image management.
5422 cdl_option CYGOPT_REDBOOT_FIS {
5424 # No user value, uncomment the following line to provide one.
5426 # value_source default
5429 # The following properties are affected by this value
5430 # component CYGPKG_REDBOOT_FIS_CONTENTS
5431 # ActiveIf: CYGOPT_REDBOOT_FIS
5432 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5433 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5434 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5435 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5438 # Max number of chunks of free space to manage
5439 # If this option is defined then "fis free" will
5440 # rely on the FIS directory to determine what space is
5441 # free within the FLASH. This option controls the
5442 # maximum number of free segment which can be handled
5443 # (typically this number is small). If this option is
5444 # not enabled, the the archaic behaviour of actually
5445 # scanning the FLASH for erased sectors (unreliable)
5446 # will be used to determine what's free and what's
5449 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5451 # No user value, uncomment the following line to provide one.
5453 # value_source default
5454 # Default value: 1 32
5457 # Flash Image System default directory contents
5459 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5460 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5461 # CYGOPT_REDBOOT_FIS == 1
5464 # Calculated value: 1
5470 # Flash block containing the Directory
5471 # Which block of flash should hold the directory
5472 # information. Positive numbers are absolute block
5473 # numbers. Negative block numbers count backwards
5474 # from the last block. eg 2 means block 2, -2
5475 # means the last but one block.
5477 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5479 # No user value, uncomment the following line to provide one.
5481 # value_source default
5484 # The following properties are affected by this value
5485 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5486 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5487 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5490 # Redundant Flash Image System Directory Support
5491 # This option enables the use of a redundant FIS
5492 # directory within RedBoot. If enabled a flash block
5493 # will be reserved for a second copy of the fis
5494 # directory. Doing this allow for power failure safe
5495 # updates of the directory by the application.
5497 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5499 # No user value, uncomment the following line to provide one.
5501 # value_source default
5503 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5504 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5509 # Flash block containing the backup Directory
5510 # Which block of flash should hold the redundant
5511 # directory information. Positive numbers are
5512 # absolute block numbers. Negative block numbers
5513 # count backwards from the last block. eg 2 means
5514 # block 2, -2 means the last but one block.
5516 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5517 # This option is not active
5518 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5521 # No user value, uncomment the following line to provide one.
5523 # value_source default
5525 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5526 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5527 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5528 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5531 # The following properties are affected by this value
5532 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5533 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5534 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5538 # Pseudo-file to describe reserved area
5539 # If an area of FLASH is reserved, it is informative to
5540 # have a fis entry describing it. This option controls
5541 # creation of such an entry by default in the fis init
5544 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5545 # This option is not active
5546 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5547 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5551 # No user value, uncomment the following line to provide one.
5553 # value_source default
5557 # File to describe RedBoot boot image
5558 # Normally a ROM-startup RedBoot image is first in the
5559 # FLASH, and the system boots using that image. This
5560 # option controls creation of an entry describing it in
5561 # the fis init command. It might be disabled if a
5562 # platform has an immutable boot image of its own, where
5563 # we use a POST-startup RedBoot instead, which performs
5564 # less board initialization.
5566 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5568 # No user value, uncomment the following line to provide one.
5570 # value_source default
5573 # The following properties are affected by this value
5574 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5575 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5576 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5577 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5580 # File to describe RedBoot POST-compatible image
5581 # This option controls creation of an entry describing a
5582 # POST-startup RedBoot image in the fis init command.
5583 # Not all platforms support POST-startup. A platform
5584 # might have both for testing purposes, where the
5585 # eventual user would substitute their own POST code for
5586 # the initial ROM-startup RedBoot, and then jump to the
5587 # POST-compatible RedBoot immediately following.
5589 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5591 # No user value, uncomment the following line to provide one.
5593 # value_source default
5594 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5595 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5600 # Offset of POST image from FLASH start
5601 # This option specifies the offset for a POST image from
5602 # the start of FLASH. If unset, then the fis entry
5603 # describing the POST image will be placed where
5606 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5607 # This option is not active
5608 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5611 # No user value, uncomment the following line to provide one.
5613 # value_source default
5614 # Default value: 0 0
5615 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5616 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5617 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5620 # The following properties are affected by this value
5621 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5622 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5626 # File to describe RedBoot backup image
5627 # This option controls creation of an entry describing a
5628 # backup RedBoot image in the fis init command.
5629 # Conventionally a RAM-startup RedBoot image is kept
5630 # under this name for use in updating the ROM-based
5631 # RedBoot that boots the board.
5633 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5635 # No user value, uncomment the following line to provide one.
5637 # value_source default
5641 # Include ARM SIB ID in FIS
5642 # If set, this option will cause the last 5 words of
5643 # the FIS to include the special ID needed for the
5644 # flash to be recognized as a reserved area for RedBoot
5645 # by an ARM BootRom monitor.
5647 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5649 # No user value, uncomment the following line to provide one.
5651 # value_source default
5655 # Size of FIS directory entry
5656 # The FIS directory is limited to one single flash
5657 # sector. If your flash has tiny sectors, you may wish
5658 # to reduce this value in order to get more slots in
5659 # the FIS directory.
5661 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5663 # No user value, uncomment the following line to provide one.
5665 # value_source default
5666 # Default value: 256
5669 # Number of FIS directory entries
5670 # The FIS directory normally occupies a single flash
5671 # sector. Adjusting this value can allow for more than
5672 # one flash sector to be used, which is useful if your
5673 # sectors are very small.
5675 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5677 # No user value, uncomment the following line to provide one.
5679 # value_source default
5683 # Maximum RedBoot image size
5684 # This option controls the maximum length reserved
5685 # for the RedBoot boot image in the FIS table.
5686 # This should be a multiple of the flash's erase
5689 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5691 # No user value, uncomment the following line to provide one.
5692 # user_value 0x00020000
5693 # The inferred value should not be edited directly.
5694 inferred_value 0x00040000
5695 # value_source inferred
5696 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5697 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5701 # Offset from start of FLASH to RedBoot boot image
5702 # This option controls where the RedBoot boot image is
5703 # located relative to the start of FLASH.
5705 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5707 # No user value, uncomment the following line to provide one.
5709 # value_source default
5710 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5711 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5713 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5714 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5715 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5718 # The following properties are affected by this value
5719 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5720 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5721 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5722 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5723 # component CYGPKG_HAL_ARM_TX51_OPTIONS
5724 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5727 # Size of reserved area at start of FLASH
5728 # This option reserves an area at the start of
5729 # FLASH where RedBoot will never interfere; it is
5730 # expected that this area contains
5731 # (non-RedBoot-based) POST code or some other boot
5732 # monitor that executes before RedBoot.
5734 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5736 # No user value, uncomment the following line to provide one.
5738 # value_source default
5741 # The following properties are affected by this value
5742 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5743 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5744 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5745 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5746 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5747 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5751 # Keep all RedBoot FLASH data blocks locked.
5752 # When this option is enabled, RedBoot will keep configuration
5753 # data and the FIS directory blocks implicitly locked. While
5754 # this is somewhat safer, it does add overhead during updates.
5756 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5757 # This option is not active
5758 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5759 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5763 # No user value, uncomment the following line to provide one.
5765 # value_source default
5769 # Use CRC checksums on FIS images.
5770 # When this option is enabled, RedBoot will use CRC checksums
5771 # when reading and writing flash images.
5773 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5775 # No user value, uncomment the following line to provide one.
5777 # The inferred value should not be edited directly.
5779 # value_source inferred
5783 # ARM FLASH drivers support SIB flash block structure
5784 # This interface is implemented by a flash driver
5785 # to indicate that it supports the ARM SIB flash
5788 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5789 # No options implement this inferface
5790 # ActiveIf constraint: CYGPKG_HAL_ARM
5791 # CYGPKG_HAL_ARM == current
5794 # This value cannot be modified here.
5798 # The following properties are affected by this value
5799 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5800 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5803 # Use ARM SIB flash block structure
5804 # This option is used to interpret ARM Flash System
5805 # information blocks.
5807 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5808 # This option is not active
5809 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5810 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5814 # No user value, uncomment the following line to provide one.
5816 # value_source default
5821 # Keep RedBoot configuration data in FLASH
5822 # When this option is enabled, RedBoot will keep configuration
5823 # data in a separate block of FLASH memory. This data will
5824 # include such items as the node IP address or startup scripts.
5826 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5828 # No user value, uncomment the following line to provide one.
5830 # value_source default
5831 # Default value: CYGPKG_IO_FLASH != 0
5832 # CYGPKG_IO_FLASH == current
5835 # The following properties are affected by this value
5836 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5837 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5838 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5839 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5840 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5841 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5842 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5843 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5844 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5845 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5846 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5847 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5848 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5849 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5853 # Length of configuration data in FLASH
5854 # This option is used to control the amount of memory and FLASH
5855 # to be used for configuration options (persistent storage).
5857 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5859 # No user value, uncomment the following line to provide one.
5861 # value_source default
5862 # Default value: 4096
5865 # Style of media used for persistent data storage
5866 # Persistent data storage can either be held in 'norma' FLASH
5867 # or some other device (represented by the 'EEPROM' choice).
5868 # The different styles utilize different access methods.
5870 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5872 # No user value, uncomment the following line to provide one.
5874 # value_source default
5875 # Default value: FLASH
5876 # Legal values: "FLASH" "EEPROM"
5878 # The following properties are affected by this value
5879 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5880 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5881 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5882 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5885 # Merged config data and FIS directory
5886 # If this option is set, then the FIS directory and FLASH
5887 # configuration database will be stored in the same physical
5890 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5891 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5892 # CYGOPT_REDBOOT_FIS == 1
5893 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5897 # No user value, uncomment the following line to provide one.
5899 # value_source default
5902 # The following properties are affected by this value
5903 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5904 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5907 # Which block of flash to use
5908 # Which block of flash should hold the configuration
5909 # information. Positive numbers are absolute block numbers.
5910 # Negative block numbers count backwards from the last block.
5911 # eg 2 means block 2, -2 means the last but one block.
5913 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5915 # No user value, uncomment the following line to provide one.
5917 # value_source default
5921 # Support simple macros/aliases in FLASH
5922 # This option is used to allow support for simple text-based
5923 # macros (aliases). These aliases are kept in the FLASH
5924 # configuration data (persistent storage).
5926 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5928 # No user value, uncomment the following line to provide one.
5930 # value_source default
5934 # Length of strings in FLASH configuration data
5935 # This option is used to control the amount of memory
5936 # and FLASH to be used for string configuration
5937 # options (persistent storage).
5939 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5941 # No user value, uncomment the following line to provide one.
5943 # value_source default
5944 # Default value: 128
5947 # Length of configuration script(s) in FLASH
5948 # This option is used to control the amount of memory and
5949 # FLASH to be used for configuration options (persistent
5952 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5954 # No user value, uncomment the following line to provide one.
5956 # The inferred value should not be edited directly.
5958 # value_source inferred
5959 # Default value: 512
5962 # Fallback to read-only FLASH configuration
5963 # This option will cause the configuration information to
5964 # revert to the readonly information stored in the FLASH.
5965 # The option only takes effect after
5966 # 1) the config_ok flag has been set to be true,
5967 # indicating that at one time the copy in RAM was valid;
5969 # 2) the information in RAM has been verified to be invalid
5971 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5973 # No user value, uncomment the following line to provide one.
5975 # value_source default
5976 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5977 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5982 # Allow RedBoot to support fileio
5983 # If this option is enabled then RedBoot will provide commands
5984 # to load files from fileio file systems such as JFFS2.
5986 cdl_component CYGPKG_REDBOOT_FILEIO {
5987 # This option is not active
5988 # ActiveIf constraint: CYGPKG_IO_FILEIO
5989 # CYGPKG_IO_FILEIO (unknown) == 0
5993 # No user value, uncomment the following line to provide one.
5995 # value_source default
5998 # The following properties are affected by this value
5999 # option CYGNUM_REDBOOT_GETC_BUFFER
6000 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6004 # Include an ls command
6005 # If this option is enabled a simple ls command will be
6006 # included in redboot so the contents of a directory
6009 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
6010 # This option is not active
6011 # The parent CYGPKG_REDBOOT_FILEIO is not active
6014 # No user value, uncomment the following line to provide one.
6016 # value_source default
6021 # Allow RedBoot to support disks
6022 # If this option is enabled then RedBoot will provide commands
6023 # to load disk files.
6025 cdl_component CYGPKG_REDBOOT_DISK {
6033 # Include Redboot commands for disk access
6035 cdl_option CYGSEM_REDBOOT_DISK {
6036 # This option is not active
6037 # The parent CYGPKG_REDBOOT_DISK is disabled
6040 # No user value, uncomment the following line to provide one.
6042 # value_source default
6043 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6044 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6048 # Hardware drivers for disk-type devices
6050 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6051 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6052 # This option is not active
6053 # The parent CYGPKG_REDBOOT_DISK is disabled
6055 # This value cannot be modified here.
6059 # The following properties are affected by this value
6060 # option CYGSEM_REDBOOT_DISK
6061 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6064 # Maximum number of supported disks
6065 # This option controls the number of disks supported by
6068 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6069 # This option is not active
6070 # The parent CYGPKG_REDBOOT_DISK is disabled
6073 # No user value, uncomment the following line to provide one.
6075 # value_source default
6079 # Maximum number of partitions per disk
6080 # This option controls the maximum number of supported
6081 # partitions per disk.
6083 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6084 # This option is not active
6085 # The parent CYGPKG_REDBOOT_DISK is disabled
6088 # No user value, uncomment the following line to provide one.
6090 # value_source default
6094 # Support IDE disks.
6095 # When this option is enabled, RedBoot will support IDE disks.
6097 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6098 # This option is not active
6099 # The parent CYGPKG_REDBOOT_DISK is disabled
6100 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6101 # CYGINT_HAL_PLF_IF_IDE == 0
6105 # No user value, uncomment the following line to provide one.
6107 # value_source default
6112 # Work with VMware virtual disks
6113 # This option controls the disk driver behavior at
6116 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6117 # This option is not active
6118 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6121 # No user value, uncomment the following line to provide one.
6123 # value_source default
6128 # Support Linux second extended filesystems.
6129 # When this option is enabled, RedBoot will support EXT2
6132 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6133 # This option is not active
6134 # The parent CYGPKG_REDBOOT_DISK is disabled
6137 # No user value, uncomment the following line to provide one.
6139 # value_source default
6143 # Support ISO9660 filesystems.
6144 # When this option is enabled, RedBoot will support ISO9660
6147 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6148 # This option is not active
6149 # The parent CYGPKG_REDBOOT_DISK is disabled
6151 # Calculated value: 0
6158 # doc: ref/persistent-state-flash.html
6159 # This contains options related to RedBoot's boot script
6162 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6163 # There is no associated value.
6167 # Boot scripting enabled
6168 # This option controls whether RedBoot boot script
6169 # functionality is enabled.
6171 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6172 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6173 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6174 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6177 # Calculated value: 1
6182 # Use default RedBoot boot script
6183 # If enabled, this option will tell RedBoot to use the
6184 # value of this option as a default boot script.
6186 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6188 # No user value, uncomment the following line to provide one.
6190 # The inferred value should not be edited directly.
6192 # value_source inferred
6193 # Default value: 0 0
6195 # The following properties are affected by this value
6196 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6197 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6200 # Resolution (in ms) for script timeout value.
6201 # This option controls the resolution of the script
6202 # timeout. The value is specified in milliseconds
6203 # (ms), thus to have the script timeout be defined in
6204 # terms of tenths of seconds, use 100.
6206 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6208 # No user value, uncomment the following line to provide one.
6210 # The inferred value should not be edited directly.
6212 # value_source inferred
6213 # Default value: 1000
6216 # Script default timeout value
6217 # This option is used to set the default timeout for startup
6218 # scripts, when they are enabled.
6220 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6222 # No user value, uncomment the following line to provide one.
6224 # The inferred value should not be edited directly.
6226 # value_source inferred
6231 # Support RTC for time & date functions
6232 # When this option is enabled, RedBoot will support commands to
6233 # query and set the real time clock (time and date)
6235 cdl_option CYGSEM_REDBOOT_RTC {
6236 # This option is not active
6237 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6238 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6242 # No user value, uncomment the following line to provide one.
6244 # value_source default
6248 # Behave like a ROM monitor
6249 # Enabling this option will allow RedBoot to provide ROM
6250 # monitor-style services to programs which it executes.
6252 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6253 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6254 # CYG_HAL_STARTUP == ROMRAM
6255 # CYG_HAL_STARTUP == ROMRAM
6258 # Calculated value: 1
6261 # Requires: CYGSEM_HAL_ROM_MONITOR
6262 # CYGSEM_HAL_ROM_MONITOR == 1
6266 # Allow RedBoot to handle GNUPro application 'syscalls'.
6267 # If this option is enabled then RedBoot will install a
6268 # syscall handler to support debugging of applications
6269 # based on GNUPro newlib/bsp.
6271 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6273 # No user value, uncomment the following line to provide one.
6275 # value_source default
6278 # The following properties are affected by this value
6279 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6280 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6281 # option CYGPKG_HAL_GDB_FILEIO
6282 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6286 # Support additional syscalls for 'gprof' profiling
6287 # Support additional syscalls to support a periodic callback
6288 # function for histogram-style profiling, and an enquire/set
6290 # The application must use the GNUPro newlib facilities
6293 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6294 # This option is not active
6295 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6296 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6297 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6301 # No user value, uncomment the following line to provide one.
6303 # value_source default
6307 # Does the HAL support 'gprof' profiling?
6309 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6310 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6311 # This option is not active
6312 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6314 # This value cannot be modified here.
6318 # The following properties are affected by this value
6319 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6320 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6323 # Do not raise SIGTRAP when program exits
6324 # For some (single shot) newlib based programs,
6325 # exiting and returning a termination status may be
6326 # the normal expected behavior.
6328 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6329 # This option is not active
6330 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6333 # No user value, uncomment the following line to provide one.
6335 # value_source default
6340 # Use a common buffer for Zlib and FIS
6341 # Use a common memory buffer for both the zlib workspace
6342 # and FIS directory operations. This can save a substantial
6343 # amount of RAM, especially when flash sectors are large.
6345 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6346 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6347 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6348 # CYGOPT_REDBOOT_FIS == 1
6352 # No user value, uncomment the following line to provide one.
6354 # value_source default
6359 # Size of Zlib/FIS common buffer
6360 # Size of common buffer to allocate. Must be at least the
6361 # size of one flash sector.
6363 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6364 # This option is not active
6365 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6368 # No user value, uncomment the following line to provide one.
6369 # user_value 0x0000C000
6370 # value_source default
6371 # Default value: 0x0000C000
6372 # Legal values: 0x4000 to 0x80000000
6376 # Buffer size in getc when loading images
6377 # When loading images a buffer is used between redboot and the
6378 # underlying storage medium, eg a filesystem, or a socket etc.
6379 # The size of this buffer can have a big impart on load speed.
6381 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6383 # No user value, uncomment the following line to provide one.
6385 # value_source default
6386 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6387 # CYGPKG_REDBOOT_FILEIO == 0
6392 # Redboot for ARM options
6393 # This option lists the target's requirements for a valid Redboot
6396 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6397 # ActiveIf constraint: CYGPKG_REDBOOT
6398 # CYGPKG_REDBOOT == current
6401 # There is no associated value.
6403 # The following properties are affected by this value
6407 # Provide the exec command in RedBoot
6408 # This option contains requirements for booting linux
6409 # from RedBoot. The component is enabled/disabled from
6412 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6413 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6414 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6417 # There is no associated value.
6421 # Enable -x switch for exec command.
6422 # This option allows bi-endian platforms to launch kernels
6423 # built for an endianess different than the RedBoot endianess
6425 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6427 # No user value, uncomment the following line to provide one.
6429 # value_source default
6433 # Physical base address of linux kernel
6434 # This is the physical address of the base of the
6435 # Linux kernel image.
6437 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6439 # No user value, uncomment the following line to provide one.
6440 # user_value 0x90108000
6441 # value_source default
6442 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6443 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6447 # Default physical base address of linux kernel
6448 # This is the physical address of the base of the
6449 # Linux kernel image. This option gets set by the
6452 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6454 # No user value, uncomment the following line to provide one.
6455 # user_value 0x00008000
6456 # The inferred value should not be edited directly.
6457 inferred_value 0x90108000
6458 # value_source inferred
6459 # Default value: 0x00008000
6461 # The following properties are affected by this value
6462 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6463 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6464 # component CYGPKG_REDBOOT_HAL_TX51_OPTIONS
6465 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6468 # Base address of linux kernel parameter tags
6469 # This is the base address of the area of memory used to
6470 # pass parameters to the Linux kernel. This should be chosen
6471 # to avoid overlap with the kernel and any ramdisk image.
6473 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6475 # No user value, uncomment the following line to provide one.
6476 # user_value 0x00000100
6477 # value_source default
6478 # Default value: 0x00000100
6483 # Redboot HAL options
6484 # This option lists the target's requirements for a valid Redboot
6487 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6488 # ActiveIf constraint: CYGPKG_REDBOOT
6489 # CYGPKG_REDBOOT == current
6492 # There is no associated value.
6496 # Build Redboot ROM binary image
6497 # This option enables the conversion of the Redboot ELF
6498 # image to a binary image suitable for ROM programming.
6500 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6501 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6502 # CYGBLD_BUILD_REDBOOT == 1
6506 # No user value, uncomment the following line to provide one.
6508 # value_source default
6513 # Redboot HAL variant options
6515 cdl_component CYGPKG_REDBOOT_HAL_TX51_OPTIONS {
6516 # ActiveIf constraint: CYGPKG_REDBOOT
6517 # CYGPKG_REDBOOT == current
6520 # There is no associated value.
6521 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6522 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6527 # ISO C and POSIX infrastructure
6528 # eCos supports implementations of ISO C libraries and POSIX
6529 # implementations. This package provides infrastructure used by
6530 # all such implementations.
6532 cdl_package CYGPKG_ISOINFRA {
6533 # Packages cannot be added or removed, nor can their version be changed,
6534 # simply by editing their value. Instead the appropriate configuration
6535 # should be used to perform these actions.
6537 # This value cannot be modified here.
6539 # Current value: 1 current
6541 # The following properties are affected by this value
6542 # component CYGBLD_BUILD_REDBOOT
6543 # Requires: CYGPKG_ISOINFRA
6544 # package CYGPKG_LIBC_STRING
6545 # Requires: CYGPKG_ISOINFRA
6546 # package CYGPKG_COMPRESS_ZLIB
6547 # Requires: CYGPKG_ISOINFRA
6548 # package CYGPKG_IO_FLASH
6549 # Requires: CYGPKG_ISOINFRA
6550 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6551 # Requires: CYGPKG_ISOINFRA
6552 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6553 # DefaultValue: 0 != CYGPKG_ISOINFRA
6554 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6555 # ActiveIf: CYGPKG_ISOINFRA
6556 # package CYGPKG_LIBC_I18N
6557 # Requires: CYGPKG_ISOINFRA
6558 # package CYGPKG_LIBC_STDLIB
6559 # Requires: CYGPKG_ISOINFRA
6563 # Startup and termination
6565 cdl_component CYGPKG_ISO_STARTUP {
6566 # There is no associated value.
6570 # main() startup implementations
6571 # Implementations of this interface arrange for a user-supplied
6572 # main() to be called in an ISO compatible environment.
6574 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6575 # No options implement this inferface
6576 # This value cannot be modified here.
6579 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6580 # CYGINT_ISO_MAIN_STARTUP == 0
6583 # The following properties are affected by this value
6584 # interface CYGINT_ISO_MAIN_STARTUP
6585 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6588 # environ implementations
6589 # Implementations of this interface provide the environ
6590 # variable required by POSIX.
6592 cdl_interface CYGINT_ISO_ENVIRON {
6593 # No options implement this inferface
6594 # This value cannot be modified here.
6597 # Requires: 1 >= CYGINT_ISO_ENVIRON
6598 # CYGINT_ISO_ENVIRON == 0
6601 # The following properties are affected by this value
6602 # interface CYGINT_ISO_ENVIRON
6603 # Requires: 1 >= CYGINT_ISO_ENVIRON
6609 cdl_component CYGPKG_ISO_CTYPE_H {
6610 # There is no associated value.
6614 # Number of implementations of ctype functions
6616 cdl_interface CYGINT_ISO_CTYPE {
6617 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6618 # This value cannot be modified here.
6621 # Requires: 1 >= CYGINT_ISO_CTYPE
6622 # CYGINT_ISO_CTYPE == 1
6625 # The following properties are affected by this value
6626 # interface CYGINT_ISO_CTYPE
6627 # Requires: 1 >= CYGINT_ISO_CTYPE
6628 # package CYGPKG_HAL_ARM_TX51KARO
6629 # Requires: CYGINT_ISO_CTYPE
6630 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6631 # Requires: CYGINT_ISO_CTYPE
6632 # package CYGPKG_LIBC_STDLIB
6633 # Requires: CYGINT_ISO_CTYPE
6636 # Ctype implementation header
6638 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6640 # No user value, uncomment the following line to provide one.
6642 # The inferred value should not be edited directly.
6643 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6644 # value_source inferred
6645 # Default value: 0 0
6647 # The following properties are affected by this value
6648 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6649 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6650 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6651 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6657 cdl_component CYGPKG_ISO_ERRNO {
6658 # There is no associated value.
6662 # Number of implementations of error codes
6664 cdl_interface CYGINT_ISO_ERRNO_CODES {
6665 # Implemented by CYGPKG_ERROR, active, enabled
6666 # This value cannot be modified here.
6669 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6670 # CYGINT_ISO_ERRNO_CODES == 1
6673 # The following properties are affected by this value
6674 # interface CYGINT_ISO_ERRNO_CODES
6675 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6678 # Error codes implementation header
6680 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6682 # No user value, uncomment the following line to provide one.
6684 # The inferred value should not be edited directly.
6685 inferred_value 1 <cyg/error/codes.h>
6686 # value_source inferred
6687 # Default value: 0 0
6689 # The following properties are affected by this value
6690 # package CYGPKG_ERROR
6691 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6694 # Number of implementations of errno variable
6696 cdl_interface CYGINT_ISO_ERRNO {
6697 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6698 # This value cannot be modified here.
6701 # Requires: 1 >= CYGINT_ISO_ERRNO
6702 # CYGINT_ISO_ERRNO == 1
6705 # The following properties are affected by this value
6706 # interface CYGINT_ISO_ERRNO
6707 # Requires: 1 >= CYGINT_ISO_ERRNO
6710 # errno variable implementation header
6712 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6714 # No user value, uncomment the following line to provide one.
6716 # The inferred value should not be edited directly.
6717 inferred_value 1 <cyg/error/errno.h>
6718 # value_source inferred
6719 # Default value: 0 0
6721 # The following properties are affected by this value
6722 # component CYGPKG_ERROR_ERRNO
6723 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6727 # Locale-related functions
6729 cdl_component CYGPKG_ISO_LOCALE {
6730 # There is no associated value.
6734 # Number of implementations of locale functions
6736 cdl_interface CYGINT_ISO_LOCALE {
6737 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6738 # This value cannot be modified here.
6741 # Requires: 1 >= CYGINT_ISO_LOCALE
6742 # CYGINT_ISO_LOCALE == 1
6745 # The following properties are affected by this value
6746 # interface CYGINT_ISO_LOCALE
6747 # Requires: 1 >= CYGINT_ISO_LOCALE
6750 # Locale implementation header
6752 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6754 # No user value, uncomment the following line to provide one.
6756 # value_source default
6757 # Default value: 0 0
6761 # Standard I/O-related functionality
6763 cdl_component CYGPKG_ISO_STDIO {
6764 # There is no associated value.
6768 # Number of implementations of stdio file types
6770 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6771 # No options implement this inferface
6772 # This value cannot be modified here.
6774 # Current value: 0 0
6775 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6776 # CYGINT_ISO_STDIO_FILETYPES == 0
6779 # The following properties are affected by this value
6780 # interface CYGINT_ISO_STDIO_FILETYPES
6781 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6784 # Stdio file types implementation header
6786 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6788 # No user value, uncomment the following line to provide one.
6790 # value_source default
6791 # Default value: 0 0
6794 # Stdio standard streams implementations
6796 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6797 # No options implement this inferface
6798 # This value cannot be modified here.
6800 # Current value: 0 0
6801 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6802 # CYGINT_ISO_STDIO_STREAMS == 0
6805 # The following properties are affected by this value
6806 # interface CYGINT_ISO_STDIO_STREAMS
6807 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6810 # Stdio standard streams implementation header
6811 # This header file must define stdin, stdout
6814 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6816 # No user value, uncomment the following line to provide one.
6818 # value_source default
6819 # Default value: 0 0
6822 # Number of implementations of stdio file operations
6824 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6825 # No options implement this inferface
6826 # This value cannot be modified here.
6828 # Current value: 0 0
6829 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6830 # CYGINT_ISO_STDIO_FILEOPS == 0
6833 # The following properties are affected by this value
6834 # interface CYGINT_ISO_STDIO_FILEOPS
6835 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6838 # Stdio file operations implementation header
6839 # This header controls the file system operations on a file
6840 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6843 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6845 # No user value, uncomment the following line to provide one.
6847 # value_source default
6848 # Default value: 0 0
6851 # Number of implementations of stdio file access functionals
6853 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6854 # No options implement this inferface
6855 # This value cannot be modified here.
6857 # Current value: 0 0
6858 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6859 # CYGINT_ISO_STDIO_FILEACCESS == 0
6862 # The following properties are affected by this value
6863 # interface CYGINT_ISO_STDIO_FILEACCESS
6864 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6865 # option CYGFUN_COMPRESS_ZLIB_GZIO
6866 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6869 # Stdio file access implementation header
6870 # This header controls the file access operations
6871 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6872 # setvbuf(), and associated constants.
6874 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6876 # No user value, uncomment the following line to provide one.
6878 # value_source default
6879 # Default value: 0 0
6882 # Number of implementations of stdio formatted I/O
6884 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6885 # No options implement this inferface
6886 # This value cannot be modified here.
6888 # Current value: 0 0
6889 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6890 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6893 # The following properties are affected by this value
6894 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6895 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6896 # option CYGFUN_COMPRESS_ZLIB_GZIO
6897 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6900 # Stdio formatted I/O implementation header
6902 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6904 # No user value, uncomment the following line to provide one.
6906 # value_source default
6907 # Default value: 0 0
6910 # Number of implementations of stdio character I/O
6912 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6913 # No options implement this inferface
6914 # This value cannot be modified here.
6916 # Current value: 0 0
6917 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6918 # CYGINT_ISO_STDIO_CHAR_IO == 0
6921 # The following properties are affected by this value
6922 # interface CYGINT_ISO_STDIO_CHAR_IO
6923 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6926 # Stdio character I/O implementation header
6928 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6930 # No user value, uncomment the following line to provide one.
6932 # value_source default
6933 # Default value: 0 0
6936 # Number of implementations of stdio direct I/O
6938 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6939 # No options implement this inferface
6940 # This value cannot be modified here.
6942 # Current value: 0 0
6943 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6944 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6947 # The following properties are affected by this value
6948 # interface CYGINT_ISO_STDIO_DIRECT_IO
6949 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6952 # Stdio direct I/O implementation header
6954 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6956 # No user value, uncomment the following line to provide one.
6958 # value_source default
6959 # Default value: 0 0
6962 # Number of implementations of stdio file positioning
6964 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6965 # No options implement this inferface
6966 # This value cannot be modified here.
6968 # Current value: 0 0
6969 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6970 # CYGINT_ISO_STDIO_FILEPOS == 0
6973 # The following properties are affected by this value
6974 # interface CYGINT_ISO_STDIO_FILEPOS
6975 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6976 # option CYGFUN_COMPRESS_ZLIB_GZIO
6977 # Requires: CYGINT_ISO_STDIO_FILEPOS
6980 # Stdio file positioning implementation header
6982 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6984 # No user value, uncomment the following line to provide one.
6986 # value_source default
6987 # Default value: 0 0
6990 # Number of implementations of stdio error handling
6992 cdl_interface CYGINT_ISO_STDIO_ERROR {
6993 # No options implement this inferface
6994 # This value cannot be modified here.
6996 # Current value: 0 0
6997 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6998 # CYGINT_ISO_STDIO_ERROR == 0
7001 # The following properties are affected by this value
7002 # interface CYGINT_ISO_STDIO_ERROR
7003 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7006 # Stdio error handling implementation header
7008 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
7010 # No user value, uncomment the following line to provide one.
7012 # value_source default
7013 # Default value: 0 0
7016 # POSIX fd-related function implementations
7018 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7019 # No options implement this inferface
7020 # This value cannot be modified here.
7022 # Current value: 0 0
7023 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7024 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7027 # The following properties are affected by this value
7028 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7029 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7032 # POSIX fd-related function implementation header
7034 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7036 # No user value, uncomment the following line to provide one.
7038 # value_source default
7039 # Default value: 0 0
7043 # Standard general utility functions
7045 cdl_component CYGPKG_ISO_STDLIB {
7046 # There is no associated value.
7050 # String conversion function implementations
7052 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7053 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7054 # This value cannot be modified here.
7057 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7058 # CYGINT_ISO_STDLIB_STRCONV == 1
7061 # The following properties are affected by this value
7062 # interface CYGINT_ISO_STDLIB_STRCONV
7063 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7066 # String conversion function implementation header
7068 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7070 # No user value, uncomment the following line to provide one.
7072 # The inferred value should not be edited directly.
7073 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7074 # value_source inferred
7075 # Default value: 0 0
7077 # The following properties are affected by this value
7078 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7079 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7082 # String to FP conversion function implementations
7084 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7085 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7086 # This value cannot be modified here.
7089 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7090 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7093 # The following properties are affected by this value
7094 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7095 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7098 # String to FP conversion function implementation header
7100 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7102 # No user value, uncomment the following line to provide one.
7104 # value_source default
7105 # Default value: 0 0
7108 # Random number generator implementations
7110 cdl_interface CYGINT_ISO_RAND {
7111 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7112 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7113 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7114 # This value cannot be modified here.
7117 # Requires: 1 >= CYGINT_ISO_RAND
7118 # CYGINT_ISO_RAND == 1
7121 # The following properties are affected by this value
7122 # interface CYGINT_ISO_RAND
7123 # Requires: 1 >= CYGINT_ISO_RAND
7126 # Random number generator implementation header
7128 cdl_option CYGBLD_ISO_RAND_HEADER {
7130 # No user value, uncomment the following line to provide one.
7132 # value_source default
7133 # Default value: 0 0
7136 # Malloc implementations
7138 cdl_interface CYGINT_ISO_MALLOC {
7139 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7140 # This value cannot be modified here.
7143 # Requires: 1 >= CYGINT_ISO_MALLOC
7144 # CYGINT_ISO_MALLOC == 1
7147 # The following properties are affected by this value
7148 # interface CYGINT_ISO_MALLOC
7149 # Requires: 1 >= CYGINT_ISO_MALLOC
7150 # option CYGFUN_LIBC_STRING_STRDUP
7151 # ActiveIf: CYGINT_ISO_MALLOC
7154 # Malloc implementation header
7156 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7158 # No user value, uncomment the following line to provide one.
7160 # value_source default
7161 # Default value: 0 0
7164 # Mallinfo() implementations
7166 cdl_interface CYGINT_ISO_MALLINFO {
7167 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7168 # This value cannot be modified here.
7171 # Requires: 1 >= CYGINT_ISO_MALLINFO
7172 # CYGINT_ISO_MALLINFO == 1
7175 # The following properties are affected by this value
7176 # interface CYGINT_ISO_MALLINFO
7177 # Requires: 1 >= CYGINT_ISO_MALLINFO
7180 # Mallinfo() implementation header
7182 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7184 # No user value, uncomment the following line to provide one.
7186 # value_source default
7187 # Default value: 0 0
7190 # Program exit functionality implementations
7192 cdl_interface CYGINT_ISO_EXIT {
7193 # No options implement this inferface
7194 # This value cannot be modified here.
7197 # Requires: 1 >= CYGINT_ISO_EXIT
7198 # CYGINT_ISO_EXIT == 0
7201 # The following properties are affected by this value
7202 # interface CYGINT_ISO_EXIT
7203 # Requires: 1 >= CYGINT_ISO_EXIT
7204 # option CYGFUN_INFRA_DUMMY_ABORT
7205 # Requires: !CYGINT_ISO_EXIT
7206 # option CYGFUN_INFRA_DUMMY_ABORT
7207 # DefaultValue: CYGINT_ISO_EXIT == 0
7210 # Program exit functionality implementation header
7212 cdl_option CYGBLD_ISO_EXIT_HEADER {
7214 # No user value, uncomment the following line to provide one.
7216 # value_source default
7217 # Default value: 0 0
7220 # Program environment implementations
7222 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7223 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7224 # This value cannot be modified here.
7227 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7228 # CYGINT_ISO_STDLIB_ENVIRON == 1
7231 # The following properties are affected by this value
7232 # interface CYGINT_ISO_STDLIB_ENVIRON
7233 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7236 # Program environment implementation header
7238 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7240 # No user value, uncomment the following line to provide one.
7242 # value_source default
7243 # Default value: 0 0
7246 # system() implementations
7248 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7249 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7250 # This value cannot be modified here.
7253 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7254 # CYGINT_ISO_STDLIB_SYSTEM == 1
7257 # The following properties are affected by this value
7258 # interface CYGINT_ISO_STDLIB_SYSTEM
7259 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7262 # system() implementation header
7264 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7266 # No user value, uncomment the following line to provide one.
7268 # value_source default
7269 # Default value: 0 0
7272 # bsearch() implementations
7274 cdl_interface CYGINT_ISO_BSEARCH {
7275 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7276 # This value cannot be modified here.
7279 # Requires: 1 >= CYGINT_ISO_BSEARCH
7280 # CYGINT_ISO_BSEARCH == 1
7283 # The following properties are affected by this value
7284 # interface CYGINT_ISO_BSEARCH
7285 # Requires: 1 >= CYGINT_ISO_BSEARCH
7288 # bsearch() implementation header
7290 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7292 # No user value, uncomment the following line to provide one.
7294 # value_source default
7295 # Default value: 0 0
7298 # qsort() implementations
7300 cdl_interface CYGINT_ISO_QSORT {
7301 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7302 # This value cannot be modified here.
7305 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7306 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7309 # The following properties are affected by this value
7312 # qsort() implementation header
7314 cdl_option CYGBLD_ISO_QSORT_HEADER {
7316 # No user value, uncomment the following line to provide one.
7318 # value_source default
7319 # Default value: 0 0
7322 # abs()/labs() implementations
7324 cdl_interface CYGINT_ISO_ABS {
7325 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7326 # This value cannot be modified here.
7329 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7330 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7333 # The following properties are affected by this value
7336 # abs()/labs() implementation header
7338 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7340 # No user value, uncomment the following line to provide one.
7342 # The inferred value should not be edited directly.
7343 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7344 # value_source inferred
7345 # Default value: 0 0
7347 # The following properties are affected by this value
7348 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7349 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7352 # div()/ldiv() implementations
7354 cdl_interface CYGINT_ISO_DIV {
7355 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7356 # This value cannot be modified here.
7359 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7360 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7363 # The following properties are affected by this value
7366 # div()/ldiv() implementation header
7368 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7370 # No user value, uncomment the following line to provide one.
7372 # The inferred value should not be edited directly.
7373 inferred_value 1 <cyg/libc/stdlib/div.inl>
7374 # value_source inferred
7375 # Default value: 0 0
7377 # The following properties are affected by this value
7378 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7379 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7382 # Header defining the implementation's MB_CUR_MAX
7384 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7386 # No user value, uncomment the following line to provide one.
7388 # value_source default
7389 # Default value: 0 0
7391 # The following properties are affected by this value
7392 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7393 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7396 # Multibyte character implementations
7398 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7399 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7400 # This value cannot be modified here.
7403 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7404 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7407 # The following properties are affected by this value
7408 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7409 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7412 # Multibyte character implementation header
7414 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7416 # No user value, uncomment the following line to provide one.
7418 # value_source default
7419 # Default value: 0 0
7425 cdl_component CYGPKG_ISO_STRING {
7426 # There is no associated value.
7430 # Number of implementations of strerror() function
7432 cdl_interface CYGINT_ISO_STRERROR {
7433 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7434 # This value cannot be modified here.
7436 # Current value: 1 1
7437 # Requires: 1 >= CYGINT_ISO_STRERROR
7438 # CYGINT_ISO_STRERROR == 1
7441 # The following properties are affected by this value
7442 # interface CYGINT_ISO_STRERROR
7443 # Requires: 1 >= CYGINT_ISO_STRERROR
7446 # strerror() implementation header
7448 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7450 # No user value, uncomment the following line to provide one.
7452 # The inferred value should not be edited directly.
7453 inferred_value 1 <cyg/error/strerror.h>
7454 # value_source inferred
7455 # Default value: 0 0
7457 # The following properties are affected by this value
7458 # option CYGPKG_ERROR_STRERROR
7459 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7462 # memcpy() implementation header
7464 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7466 # No user value, uncomment the following line to provide one.
7468 # value_source default
7469 # Default value: 0 0
7472 # memset() implementation header
7474 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7476 # No user value, uncomment the following line to provide one.
7478 # value_source default
7479 # Default value: 0 0
7482 # Number of implementations of strtok_r() function
7484 cdl_interface CYGINT_ISO_STRTOK_R {
7485 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7486 # This value cannot be modified here.
7488 # Current value: 1 1
7489 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7490 # CYGINT_ISO_STRTOK_R == 1
7493 # The following properties are affected by this value
7494 # interface CYGINT_ISO_STRTOK_R
7495 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7498 # strtok_r() implementation header
7500 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7502 # No user value, uncomment the following line to provide one.
7504 # The inferred value should not be edited directly.
7505 inferred_value 1 <cyg/libc/string/string.h>
7506 # value_source inferred
7507 # Default value: 0 0
7509 # The following properties are affected by this value
7510 # package CYGPKG_LIBC_STRING
7511 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7514 # Number of implementations of locale-specific string functions
7515 # This covers locale-dependent string functions such as strcoll()
7518 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7519 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7520 # This value cannot be modified here.
7522 # Current value: 1 1
7523 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7524 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7527 # The following properties are affected by this value
7528 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7529 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7532 # Locale-specific string functions' implementation header
7533 # This covers locale-dependent string functions such as strcoll()
7536 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7538 # No user value, uncomment the following line to provide one.
7540 # The inferred value should not be edited directly.
7541 inferred_value 1 <cyg/libc/string/string.h>
7542 # value_source inferred
7543 # Default value: 0 0
7545 # The following properties are affected by this value
7546 # package CYGPKG_LIBC_STRING
7547 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7550 # Number of implementations of BSD string functions
7552 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7553 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7554 # This value cannot be modified here.
7556 # Current value: 0 0
7557 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7558 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7561 # The following properties are affected by this value
7562 # interface CYGINT_ISO_STRING_BSD_FUNCS
7563 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7566 # BSD string functions' implementation header
7568 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7570 # No user value, uncomment the following line to provide one.
7572 # The inferred value should not be edited directly.
7573 inferred_value 1 <cyg/libc/string/bsdstring.h>
7574 # value_source inferred
7575 # Default value: 0 0
7577 # The following properties are affected by this value
7578 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7579 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7582 # Number of implementations of other mem*() functions
7584 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7585 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7586 # This value cannot be modified here.
7588 # Current value: 1 1
7589 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7590 # CYGINT_ISO_STRING_MEMFUNCS == 1
7593 # The following properties are affected by this value
7594 # interface CYGINT_ISO_STRING_MEMFUNCS
7595 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7596 # component CYGBLD_BUILD_REDBOOT
7597 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7598 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7599 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7602 # Other mem*() functions' implementation header
7604 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7606 # No user value, uncomment the following line to provide one.
7608 # The inferred value should not be edited directly.
7609 inferred_value 1 <cyg/libc/string/string.h>
7610 # value_source inferred
7611 # Default value: 0 0
7613 # The following properties are affected by this value
7614 # package CYGPKG_LIBC_STRING
7615 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7618 # Number of implementations of other ISO C str*() functions
7619 # This covers the other str*() functions defined by ISO C.
7621 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7622 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7623 # This value cannot be modified here.
7625 # Current value: 1 1
7626 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7627 # CYGINT_ISO_STRING_STRFUNCS == 1
7630 # The following properties are affected by this value
7631 # interface CYGINT_ISO_STRING_STRFUNCS
7632 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7633 # option CYGFUN_INFRA_DUMMY_STRLEN
7634 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7635 # option CYGFUN_INFRA_DUMMY_STRLEN
7636 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7637 # component CYGBLD_BUILD_REDBOOT
7638 # Requires: CYGINT_ISO_STRING_STRFUNCS
7639 # component CYGPKG_IO_ETH_DRIVERS_NET
7640 # Requires: CYGINT_ISO_STRING_STRFUNCS
7641 # option CYGFUN_COMPRESS_ZLIB_GZIO
7642 # Requires: CYGINT_ISO_STRING_STRFUNCS
7643 # package CYGPKG_IO_FLASH
7644 # Requires: CYGINT_ISO_STRING_STRFUNCS
7645 # package CYGPKG_LIBC_STDLIB
7646 # Requires: CYGINT_ISO_STRING_STRFUNCS
7649 # Other ISO C str*() functions' implementation header
7650 # This covers the other str*() functions defined by ISO C.
7652 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7654 # No user value, uncomment the following line to provide one.
7656 # The inferred value should not be edited directly.
7657 inferred_value 1 <cyg/libc/string/string.h>
7658 # value_source inferred
7659 # Default value: 0 0
7661 # The following properties are affected by this value
7662 # package CYGPKG_LIBC_STRING
7663 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7667 # Clock and time functionality
7669 cdl_component CYGPKG_ISO_TIME {
7670 # There is no associated value.
7674 # time_t implementation header
7676 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7678 # No user value, uncomment the following line to provide one.
7680 # value_source default
7681 # Default value: 0 0
7684 # clock_t implementation header
7686 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7688 # No user value, uncomment the following line to provide one.
7690 # value_source default
7691 # Default value: 0 0
7694 # struct timeval implementation header
7696 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7698 # No user value, uncomment the following line to provide one.
7700 # value_source default
7701 # Default value: 0 0
7704 # fnmatch implementation header
7706 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7708 # No user value, uncomment the following line to provide one.
7710 # value_source default
7711 # Default value: 0 0
7714 # Number of implementations of POSIX timer types
7716 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7717 # No options implement this inferface
7718 # This value cannot be modified here.
7720 # Current value: 0 0
7721 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7722 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7725 # The following properties are affected by this value
7726 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7727 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7730 # POSIX timer types implementation header
7732 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7734 # No user value, uncomment the following line to provide one.
7736 # value_source default
7737 # Default value: 0 0
7740 # Number of implementations of POSIX clock types
7742 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7743 # No options implement this inferface
7744 # This value cannot be modified here.
7746 # Current value: 0 0
7747 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7748 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7751 # The following properties are affected by this value
7752 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7753 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7756 # POSIX clock types implementation header
7758 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7760 # No user value, uncomment the following line to provide one.
7762 # value_source default
7763 # Default value: 0 0
7766 # Number of implementations of ISO C types
7768 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7769 # No options implement this inferface
7770 # This value cannot be modified here.
7772 # Current value: 0 0
7773 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7774 # CYGINT_ISO_C_TIME_TYPES == 0
7777 # The following properties are affected by this value
7778 # interface CYGINT_ISO_C_TIME_TYPES
7779 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7782 # ISO C time types implementation header
7784 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7786 # No user value, uncomment the following line to provide one.
7788 # value_source default
7789 # Default value: 0 0
7792 # Number of implementations of POSIX timers
7794 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7795 # No options implement this inferface
7796 # This value cannot be modified here.
7798 # Current value: 0 0
7799 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7800 # CYGINT_ISO_POSIX_TIMERS == 0
7803 # The following properties are affected by this value
7804 # interface CYGINT_ISO_POSIX_TIMERS
7805 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7808 # POSIX timer implementation header
7810 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7812 # No user value, uncomment the following line to provide one.
7814 # value_source default
7815 # Default value: 0 0
7818 # Number of implementations of POSIX clocks
7820 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7821 # No options implement this inferface
7822 # This value cannot be modified here.
7824 # Current value: 0 0
7825 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7826 # CYGINT_ISO_POSIX_CLOCKS == 0
7829 # The following properties are affected by this value
7830 # interface CYGINT_ISO_POSIX_CLOCKS
7831 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7834 # POSIX clocks implementation header
7836 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7838 # No user value, uncomment the following line to provide one.
7840 # value_source default
7841 # Default value: 0 0
7844 # Number of implementations of ISO C clock functions
7846 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7847 # No options implement this inferface
7848 # This value cannot be modified here.
7850 # Current value: 0 0
7851 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7852 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7855 # The following properties are affected by this value
7856 # interface CYGINT_ISO_C_CLOCK_FUNCS
7857 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7860 # ISO C clock functions' implementation header
7862 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7864 # No user value, uncomment the following line to provide one.
7866 # value_source default
7867 # Default value: 0 0
7870 # Number of implementations of tzset() function
7872 cdl_interface CYGINT_ISO_TZSET {
7873 # No options implement this inferface
7874 # This value cannot be modified here.
7876 # Current value: 0 0
7877 # Requires: 1 >= CYGINT_ISO_TZSET
7878 # CYGINT_ISO_TZSET == 0
7881 # The following properties are affected by this value
7882 # interface CYGINT_ISO_TZSET
7883 # Requires: 1 >= CYGINT_ISO_TZSET
7886 # tzset() implementation header
7888 cdl_option CYGBLD_ISO_TZSET_HEADER {
7890 # No user value, uncomment the following line to provide one.
7892 # value_source default
7893 # Default value: 0 0
7897 # Signal functionality
7899 cdl_component CYGPKG_ISO_SIGNAL {
7900 # There is no associated value.
7904 # Number of implementations of signal numbers
7906 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7907 # No options implement this inferface
7908 # This value cannot be modified here.
7911 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7912 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7915 # The following properties are affected by this value
7916 # interface CYGINT_ISO_SIGNAL_NUMBERS
7917 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7920 # Signal numbering implementation header
7921 # This header provides the mapping of signal
7922 # names (e.g. SIGBUS) to numbers.
7924 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7926 # No user value, uncomment the following line to provide one.
7928 # value_source default
7929 # Default value: 0 0
7932 # Number of signal implementations
7934 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7935 # No options implement this inferface
7936 # This value cannot be modified here.
7939 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7940 # CYGINT_ISO_SIGNAL_IMPL == 0
7943 # The following properties are affected by this value
7944 # interface CYGINT_ISO_SIGNAL_IMPL
7945 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7948 # Signals implementation header
7950 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7952 # No user value, uncomment the following line to provide one.
7954 # value_source default
7955 # Default value: 0 0
7958 # POSIX real time signals feature test macro
7959 # This defines the POSIX feature test macro
7960 # that indicates that the POSIX real time signals
7963 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7964 # No options implement this inferface
7965 # This value cannot be modified here.
7968 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7969 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7972 # The following properties are affected by this value
7973 # interface CYGINT_POSIX_REALTIME_SIGNALS
7974 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7978 # Non-local jumps functionality
7980 cdl_component CYGPKG_ISO_SETJMP {
7981 # There is no associated value.
7985 # setjmp() / longjmp() implementations
7987 cdl_interface CYGINT_ISO_SETJMP {
7988 # No options implement this inferface
7989 # This value cannot be modified here.
7992 # Requires: 1 >= CYGINT_ISO_SETJMP
7993 # CYGINT_ISO_SETJMP == 0
7996 # The following properties are affected by this value
7997 # interface CYGINT_ISO_SETJMP
7998 # Requires: 1 >= CYGINT_ISO_SETJMP
8001 # setjmp() / longjmp() implementation header
8003 cdl_option CYGBLD_ISO_SETJMP_HEADER {
8005 # No user value, uncomment the following line to provide one.
8007 # value_source default
8008 # Default value: 0 0
8011 # sigsetjmp() / siglongjmp() implementations
8013 cdl_interface CYGINT_ISO_SIGSETJMP {
8014 # No options implement this inferface
8015 # This value cannot be modified here.
8018 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8019 # CYGINT_ISO_SIGSETJMP == 0
8022 # The following properties are affected by this value
8023 # interface CYGINT_ISO_SIGSETJMP
8024 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8027 # sigsetjmp() / siglongjmp() implementation header
8029 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8031 # No user value, uncomment the following line to provide one.
8033 # value_source default
8034 # Default value: 0 0
8038 # Assertions implementation header
8040 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8042 # No user value, uncomment the following line to provide one.
8044 # value_source default
8045 # Default value: 0 0
8048 # POSIX file control
8049 # This covers the POSIX file control definitions,
8050 # normally found in <fcntl.h>
8052 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8053 # There is no associated value.
8057 # POSIX open flags implementation header
8059 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8061 # No user value, uncomment the following line to provide one.
8063 # value_source default
8064 # Default value: 0 0
8067 # POSIX fcntl() implementations
8069 cdl_interface CYGINT_ISO_FCNTL {
8070 # No options implement this inferface
8071 # This value cannot be modified here.
8074 # Requires: 1 >= CYGINT_ISO_FCNTL
8075 # CYGINT_ISO_FCNTL == 0
8078 # The following properties are affected by this value
8079 # interface CYGINT_ISO_FCNTL
8080 # Requires: 1 >= CYGINT_ISO_FCNTL
8083 # POSIX fcntl() implementation header
8085 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8087 # No user value, uncomment the following line to provide one.
8089 # value_source default
8090 # Default value: 0 0
8093 # POSIX file open implementations
8095 cdl_interface CYGINT_ISO_OPEN {
8096 # No options implement this inferface
8097 # This value cannot be modified here.
8100 # Requires: 1 >= CYGINT_ISO_OPEN
8101 # CYGINT_ISO_OPEN == 0
8104 # The following properties are affected by this value
8105 # interface CYGINT_ISO_OPEN
8106 # Requires: 1 >= CYGINT_ISO_OPEN
8109 # POSIX file open implementation header
8111 cdl_option CYGBLD_ISO_OPEN_HEADER {
8113 # No user value, uncomment the following line to provide one.
8115 # value_source default
8116 # Default value: 0 0
8120 # <sys/stat.h> definitions implementation header
8122 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8124 # No user value, uncomment the following line to provide one.
8126 # value_source default
8127 # Default value: 0 0
8130 # POSIX directory reading implementation
8132 cdl_interface CYGINT_ISO_DIRENT {
8133 # No options implement this inferface
8134 # This value cannot be modified here.
8137 # Requires: 1 >= CYGINT_ISO_DIRENT
8138 # CYGINT_ISO_DIRENT == 0
8141 # The following properties are affected by this value
8142 # interface CYGINT_ISO_DIRENT
8143 # Requires: 1 >= CYGINT_ISO_DIRENT
8146 # <dirent.h> definitions implementation header
8148 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8150 # No user value, uncomment the following line to provide one.
8152 # value_source default
8153 # Default value: 0 0
8156 # POSIX <sys/types.h> contents
8157 # This covers the types required by POSIX to be in
8160 cdl_component CYGPKG_ISO_POSIX_TYPES {
8161 # There is no associated value.
8165 # POSIX thread types implementations
8167 cdl_interface CYGINT_ISO_PTHREADTYPES {
8168 # No options implement this inferface
8169 # This value cannot be modified here.
8172 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8173 # CYGINT_ISO_PTHREADTYPES == 0
8176 # The following properties are affected by this value
8177 # interface CYGINT_ISO_PTHREADTYPES
8178 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8179 # interface CYGINT_ISO_PMUTEXTYPES
8180 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8183 # POSIX thread types implementation header
8185 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8187 # No user value, uncomment the following line to provide one.
8189 # value_source default
8190 # Default value: 0 0
8193 # POSIX mutex types implementations
8195 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8196 # No options implement this inferface
8197 # This value cannot be modified here.
8200 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8201 # CYGINT_ISO_PTHREADTYPES == 0
8205 # POSIX mutex types implementation header
8207 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8209 # No user value, uncomment the following line to provide one.
8211 # value_source default
8212 # Default value: 0 0
8215 # ssize_t implementation header
8217 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8219 # No user value, uncomment the following line to provide one.
8221 # value_source default
8222 # Default value: 0 0
8225 # Filesystem types implementation header
8227 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8229 # No user value, uncomment the following line to provide one.
8231 # value_source default
8232 # Default value: 0 0
8235 # gid_t, pid_t, uid_t implementation header
8237 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8239 # No user value, uncomment the following line to provide one.
8241 # value_source default
8242 # Default value: 0 0
8246 # Non-POSIX <sys/types.h> contents
8247 # This covers the extra types required by non-POSIX
8248 # packages to be in <sys/types.h>. These would normally
8249 # only be visible if _POSIX_SOURCE is not defined.
8251 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8252 # There is no associated value.
8256 # BSD compatible types
8258 cdl_interface CYGINT_ISO_BSDTYPES {
8259 # No options implement this inferface
8260 # This value cannot be modified here.
8263 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8264 # CYGINT_ISO_BSDTYPES == 0
8267 # The following properties are affected by this value
8268 # interface CYGINT_ISO_BSDTYPES
8269 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8274 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8276 # No user value, uncomment the following line to provide one.
8278 # value_source default
8279 # Default value: 0 0
8285 cdl_component CYGPKG_ISO_UTSNAME {
8286 # There is no associated value.
8292 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8294 # No user value, uncomment the following line to provide one.
8296 # value_source default
8297 # Default value: 0 0
8303 cdl_component CYGPKG_ISO_SCHED {
8304 # There is no associated value.
8308 # POSIX scheduler implementations
8310 cdl_interface CYGINT_ISO_SCHED_IMPL {
8311 # No options implement this inferface
8312 # This value cannot be modified here.
8315 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8316 # CYGINT_ISO_SCHED_IMPL == 0
8319 # The following properties are affected by this value
8320 # interface CYGINT_ISO_SCHED_IMPL
8321 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8324 # POSIX scheduler implementation header
8326 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8328 # No user value, uncomment the following line to provide one.
8330 # value_source default
8331 # Default value: 0 0
8337 cdl_component CYGPKG_ISO_SEMAPHORES {
8338 # There is no associated value.
8342 # POSIX semaphore implementations
8344 cdl_interface CYGINT_ISO_SEMAPHORES {
8345 # No options implement this inferface
8346 # This value cannot be modified here.
8349 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8350 # CYGINT_ISO_SEMAPHORES == 0
8353 # The following properties are affected by this value
8354 # interface CYGINT_ISO_SEMAPHORES
8355 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8358 # POSIX semaphore implementation header
8360 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8362 # No user value, uncomment the following line to provide one.
8364 # value_source default
8365 # Default value: 0 0
8369 # POSIX message queues
8371 cdl_component CYGPKG_ISO_MQUEUE {
8372 # There is no associated value.
8378 cdl_interface CYGINT_ISO_MQUEUE {
8379 # No options implement this inferface
8380 # This value cannot be modified here.
8383 # Requires: 1 >= CYGINT_ISO_MQUEUE
8384 # CYGINT_ISO_MQUEUE == 0
8387 # The following properties are affected by this value
8388 # interface CYGINT_ISO_MQUEUE
8389 # Requires: 1 >= CYGINT_ISO_MQUEUE
8390 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8391 # ActiveIf: CYGINT_ISO_MQUEUE
8392 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8393 # ActiveIf: CYGINT_ISO_MQUEUE
8396 # Implementation header
8398 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8400 # No user value, uncomment the following line to provide one.
8402 # value_source default
8403 # Default value: 0 0
8406 # Maximum number of open message queues
8408 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8409 # This option is not active
8410 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8411 # CYGINT_ISO_MQUEUE == 0
8415 # No user value, uncomment the following line to provide one.
8417 # value_source default
8418 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8419 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8420 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8424 # Maximum number of message priorities
8426 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8427 # This option is not active
8428 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8429 # CYGINT_ISO_MQUEUE == 0
8433 # No user value, uncomment the following line to provide one.
8434 # user_value 1 65535
8435 # value_source default
8436 # Default value: 1 65535
8442 cdl_component CYGPKG_ISO_PTHREAD {
8443 # There is no associated value.
8447 # POSIX pthread implementations
8449 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8450 # No options implement this inferface
8451 # This value cannot be modified here.
8453 # Current value: 0 0
8454 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8455 # CYGINT_ISO_PTHREAD_IMPL == 0
8458 # The following properties are affected by this value
8459 # interface CYGINT_ISO_PTHREAD_IMPL
8460 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8463 # POSIX pthread implementation header
8465 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8467 # No user value, uncomment the following line to provide one.
8469 # value_source default
8470 # Default value: 0 0
8473 # POSIX mutex/cond var implementations
8475 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8476 # No options implement this inferface
8477 # This value cannot be modified here.
8479 # Current value: 0 0
8480 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8481 # CYGINT_ISO_PTHREAD_MUTEX == 0
8484 # The following properties are affected by this value
8485 # interface CYGINT_ISO_PTHREAD_MUTEX
8486 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8489 # POSIX mutex/cond var implementation header
8491 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8493 # No user value, uncomment the following line to provide one.
8495 # value_source default
8496 # Default value: 0 0
8502 cdl_component CYGPKG_ISO_LIMITS {
8503 # There is no associated value.
8507 # POSIX pthread limits implementations
8509 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8510 # No options implement this inferface
8511 # This value cannot be modified here.
8514 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8515 # CYGINT_ISO_POSIX_LIMITS == 0
8518 # The following properties are affected by this value
8519 # interface CYGINT_ISO_POSIX_LIMITS
8520 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8523 # POSIX pthread limits implementation header
8525 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8527 # No user value, uncomment the following line to provide one.
8529 # value_source default
8530 # Default value: 0 0
8533 # OPEN_MAX implementation header
8535 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8537 # No user value, uncomment the following line to provide one.
8539 # value_source default
8540 # Default value: 0 0
8543 # LINK_MAX implementation header
8545 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8547 # No user value, uncomment the following line to provide one.
8549 # value_source default
8550 # Default value: 0 0
8553 # NAME_MAX implementation header
8555 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8557 # No user value, uncomment the following line to provide one.
8559 # value_source default
8560 # Default value: 0 0
8563 # PATH_MAX implementation header
8565 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8567 # No user value, uncomment the following line to provide one.
8569 # value_source default
8570 # Default value: 0 0
8576 cdl_component CYGPKG_ISO_TERMIOS {
8577 # There is no associated value.
8581 # POSIX termios implementations
8583 cdl_interface CYGINT_ISO_TERMIOS {
8584 # No options implement this inferface
8585 # This value cannot be modified here.
8588 # Requires: 1 >= CYGINT_ISO_TERMIOS
8589 # CYGINT_ISO_TERMIOS == 0
8592 # The following properties are affected by this value
8593 # interface CYGINT_ISO_TERMIOS
8594 # Requires: 1 >= CYGINT_ISO_TERMIOS
8597 # POSIX termios implementation header
8599 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8601 # No user value, uncomment the following line to provide one.
8603 # value_source default
8604 # Default value: 0 0
8610 cdl_component CYGPKG_ISO_DLFCN {
8611 # There is no associated value.
8615 # Dynamic load implementations
8617 cdl_interface CYGINT_ISO_DLFCN {
8618 # No options implement this inferface
8619 # This value cannot be modified here.
8622 # Requires: 1 >= CYGINT_ISO_DLFCN
8623 # CYGINT_ISO_DLFCN == 0
8626 # The following properties are affected by this value
8627 # interface CYGINT_ISO_DLFCN
8628 # Requires: 1 >= CYGINT_ISO_DLFCN
8631 # Dynamic load implementation header
8633 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8635 # No user value, uncomment the following line to provide one.
8637 # value_source default
8638 # Default value: 0 0
8642 # UNIX standard functions
8644 cdl_component CYGPKG_ISO_UNISTD {
8645 # There is no associated value.
8649 # POSIX timer operations implementations
8651 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8652 # No options implement this inferface
8653 # This value cannot be modified here.
8655 # Current value: 0 0
8656 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8657 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8660 # The following properties are affected by this value
8661 # interface CYGINT_ISO_POSIX_TIMER_OPS
8662 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8665 # POSIX timer operations implementation header
8667 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8669 # No user value, uncomment the following line to provide one.
8671 # value_source default
8672 # Default value: 0 0
8675 # POSIX sleep() implementations
8677 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8678 # No options implement this inferface
8679 # This value cannot be modified here.
8681 # Current value: 0 0
8682 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8683 # CYGINT_ISO_POSIX_SLEEP == 0
8686 # The following properties are affected by this value
8687 # interface CYGINT_ISO_POSIX_SLEEP
8688 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8691 # POSIX sleep() implementation header
8693 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8695 # No user value, uncomment the following line to provide one.
8697 # value_source default
8698 # Default value: 0 0
8702 # select()/poll() functions
8704 cdl_component CYGPKG_ISO_SELECT {
8705 # There is no associated value.
8709 # select() implementations
8711 cdl_interface CYGINT_ISO_SELECT {
8712 # No options implement this inferface
8713 # This value cannot be modified here.
8715 # Current value: 0 0
8716 # Requires: 1 >= CYGINT_ISO_SELECT
8717 # CYGINT_ISO_SELECT == 0
8720 # The following properties are affected by this value
8721 # interface CYGINT_ISO_SELECT
8722 # Requires: 1 >= CYGINT_ISO_SELECT
8725 # select() implementation header
8727 cdl_option CYGBLD_ISO_SELECT_HEADER {
8729 # No user value, uncomment the following line to provide one.
8731 # value_source default
8732 # Default value: 0 0
8735 # poll() implementations
8737 cdl_interface CYGINT_ISO_POLL {
8738 # No options implement this inferface
8739 # This value cannot be modified here.
8741 # Current value: 0 0
8742 # Requires: 1 >= CYGINT_ISO_POLL
8743 # CYGINT_ISO_POLL == 0
8746 # The following properties are affected by this value
8747 # interface CYGINT_ISO_POLL
8748 # Requires: 1 >= CYGINT_ISO_POLL
8751 # poll() implementation header
8753 cdl_option CYGBLD_ISO_POLL_HEADER {
8755 # No user value, uncomment the following line to provide one.
8757 # value_source default
8758 # Default value: 0 0
8762 # NetDB utility functions
8764 cdl_component CYGPKG_ISO_NETDB {
8765 # There is no associated value.
8769 # DNS implementations
8771 cdl_interface CYGINT_ISO_DNS {
8772 # No options implement this inferface
8773 # This value cannot be modified here.
8776 # Requires: 1 >= CYGINT_ISO_DNS
8777 # CYGINT_ISO_DNS == 0
8780 # The following properties are affected by this value
8781 # interface CYGINT_ISO_DNS
8782 # Requires: 1 >= CYGINT_ISO_DNS
8785 # DNS implementation header
8787 cdl_option CYGBLD_ISO_DNS_HEADER {
8789 # No user value, uncomment the following line to provide one.
8791 # value_source default
8792 # Default value: 0 0
8795 # Protocol network database implementations
8797 cdl_interface CYGINT_ISO_NETDB_PROTO {
8798 # No options implement this inferface
8799 # This value cannot be modified here.
8802 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8803 # CYGINT_ISO_NETDB_PROTO == 0
8806 # The following properties are affected by this value
8807 # interface CYGINT_ISO_NETDB_PROTO
8808 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8811 # Protocol network database implementation header
8813 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8815 # No user value, uncomment the following line to provide one.
8817 # value_source default
8818 # Default value: 0 0
8821 # Services network database implementations
8823 cdl_interface CYGINT_ISO_NETDB_SERV {
8824 # No options implement this inferface
8825 # This value cannot be modified here.
8828 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8829 # CYGINT_ISO_NETDB_SERV == 0
8832 # The following properties are affected by this value
8833 # interface CYGINT_ISO_NETDB_SERV
8834 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8837 # Services network database implementation header
8839 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8841 # No user value, uncomment the following line to provide one.
8843 # value_source default
8844 # Default value: 0 0
8849 # Package specific build options including control over
8850 # compiler flags used only in building this package,
8851 # and details of which tests are built.
8853 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8854 # There is no associated value.
8858 # Additional compiler flags
8859 # This option modifies the set of compiler flags for
8860 # building the ISO C and POSIX infrastructure package.
8861 # These flags are used in addition to the set of global flags.
8863 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8865 # No user value, uncomment the following line to provide one.
8867 # value_source default
8871 # Suppressed compiler flags
8872 # This option modifies the set of compiler flags for
8873 # building the ISO C and POSIX infrastructure package.
8874 # These flags are removed from the set of global flags
8877 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8879 # No user value, uncomment the following line to provide one.
8881 # value_source default
8888 # doc: ref/services-crc.html
8889 # This package provides support for CRC calculation. Currently
8890 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8891 # Gary S. Brown, and a 16 bit CRC.
8893 cdl_package CYGPKG_CRC {
8894 # Packages cannot be added or removed, nor can their version be changed,
8895 # simply by editing their value. Instead the appropriate configuration
8896 # should be used to perform these actions.
8898 # This value cannot be modified here.
8900 # Current value: 1 current
8902 # The following properties are affected by this value
8903 # package CYGPKG_COMPRESS_ZLIB
8904 # Requires: CYGPKG_CRC
8910 cdl_option CYGPKG_CRC_TESTS {
8911 # Calculated value: "tests/crc_test"
8913 # Current_value: tests/crc_test
8917 # Zlib compress and decompress package
8918 # This package provides support for compression and
8921 cdl_package CYGPKG_COMPRESS_ZLIB {
8922 # Packages cannot be added or removed, nor can their version be changed,
8923 # simply by editing their value. Instead the appropriate configuration
8924 # should be used to perform these actions.
8926 # This value cannot be modified here.
8928 # Current value: 1 current
8929 # Requires: CYGPKG_ISOINFRA
8930 # CYGPKG_ISOINFRA == current
8932 # Requires: CYGPKG_CRC
8933 # CYGPKG_CRC == current
8936 # The following properties are affected by this value
8937 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8938 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8942 # Override memory allocation routines.
8944 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8945 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8946 # This value cannot be modified here.
8950 # The following properties are affected by this value
8951 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8952 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8955 # Should deflate() produce 'gzip' compatible output?
8956 # If this option is set then the output of calling deflate()
8957 # will be wrapped up as a 'gzip' compatible file.
8959 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8961 # No user value, uncomment the following line to provide one.
8963 # value_source default
8967 # Does this library need malloc?
8968 # This pseudo-option will force the memalloc library to be
8969 # required iff the application does not provide it's own
8972 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8973 # This option is not active
8974 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8975 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8979 # No user value, uncomment the following line to provide one.
8981 # value_source default
8983 # Requires: CYGPKG_MEMALLOC
8984 # CYGPKG_MEMALLOC == current
8988 # Include stdio-like utility functions
8989 # This option enables the stdio-like zlib utility functions
8990 # (gzread/gzwrite and friends) provided in gzio.c.
8992 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8994 # No user value, uncomment the following line to provide one.
8996 # value_source default
8997 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8998 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
9000 # Requires: CYGINT_ISO_STDIO_FILEPOS
9001 # CYGINT_ISO_STDIO_FILEPOS == 0
9003 # Requires: CYGINT_ISO_STRING_STRFUNCS
9004 # CYGINT_ISO_STRING_STRFUNCS == 1
9006 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
9007 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
9009 # Requires: CYGINT_ISO_STDIO_FILEACCESS
9010 # CYGINT_ISO_STDIO_FILEACCESS == 0
9014 # Zlib compress and decompress package build options
9015 # Package specific build options including control over
9016 # compiler flags used only in building this package,
9017 # and details of which tests are built.
9019 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9020 # There is no associated value.
9024 # Additional compiler flags
9025 # This option modifies the set of compiler flags for
9026 # building this package. These flags are used in addition
9027 # to the set of global flags.
9029 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9031 # No user value, uncomment the following line to provide one.
9032 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9033 # value_source default
9034 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9037 # Suppressed compiler flags
9038 # This option modifies the set of compiler flags for
9039 # building this package. These flags are removed from
9040 # the set of global flags if present.
9042 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9044 # No user value, uncomment the following line to provide one.
9045 # user_value -Wstrict-prototypes
9046 # value_source default
9047 # Default value: -Wstrict-prototypes
9050 # Additional compiler flags
9051 # This option modifies the set of compiler flags for
9052 # building this package. These flags are used in addition
9053 # to the set of global flags.
9055 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9057 # No user value, uncomment the following line to provide one.
9059 # value_source default
9063 # Suppressed compiler flags
9064 # This option modifies the set of compiler flags for
9065 # building this package. These flags are removed from
9066 # the set of global flags if present.
9068 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9070 # No user value, uncomment the following line to provide one.
9072 # value_source default
9079 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9080 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9082 # Current_value: tests/zlib1.c tests/zlib2.c
9086 # FLASH device drivers
9087 # doc: ref/flash.html
9088 # This option enables drivers for basic I/O services on
9091 cdl_package CYGPKG_IO_FLASH {
9092 # Packages cannot be added or removed, nor can their version be changed,
9093 # simply by editing their value. Instead the appropriate configuration
9094 # should be used to perform these actions.
9096 # This value cannot be modified here.
9098 # Current value: 1 current
9099 # Requires: CYGPKG_ISOINFRA
9100 # CYGPKG_ISOINFRA == current
9102 # Requires: CYGINT_ISO_STRING_STRFUNCS
9103 # CYGINT_ISO_STRING_STRFUNCS == 1
9106 # The following properties are affected by this value
9107 # component CYGSEM_REDBOOT_FLASH_CONFIG
9108 # DefaultValue: CYGPKG_IO_FLASH != 0
9109 # package CYGPKG_DEVS_FLASH_ONMXC
9110 # ActiveIf: CYGPKG_IO_FLASH
9114 # Hardware FLASH device drivers
9115 # This option enables the hardware device drivers
9116 # for the current platform.
9118 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9119 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9120 # This value cannot be modified here.
9124 # The following properties are affected by this value
9125 # component CYGPKG_REDBOOT_FLASH
9126 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9129 # Hardware FLASH device drivers are not in RAM
9130 # Use of this interface is deprecated.
9131 # Drivers should make sure that the functions are
9132 # linked to RAM by putting them in .2ram sections.
9134 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9135 # No options implement this inferface
9136 # This value cannot be modified here.
9138 # Current value: 0 0
9139 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9140 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9143 # The following properties are affected by this value
9144 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9145 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9148 # Hardware can support block locking
9149 # This option will be enabled by devices which can support
9150 # locking (write-protection) of individual blocks.
9152 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9153 # No options implement this inferface
9154 # This value cannot be modified here.
9156 # Current value: 0 0
9158 # The following properties are affected by this value
9159 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9160 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9163 # Hardware cannot support direct access to FLASH memory
9164 # This option will be asserted by devices which cannot support
9165 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9166 # devices). In these cases, the driver must provide an appropriate
9167 # hardware access function.
9169 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9171 # No user value, uncomment the following line to provide one.
9173 # The inferred value should not be edited directly.
9175 # value_source inferred
9177 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9178 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9181 # The following properties are affected by this value
9182 # option CYGPRI_REDBOOT_ZLIB_FLASH
9183 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9184 # component CYGHWR_DEVS_FLASH_MMC
9185 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9186 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9187 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9188 # option CYGHWR_DEVS_FLASH_MMC_SD
9189 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9190 # option CYGHWR_DEVS_FLASH_MXC_NAND
9191 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9194 # Display status messages during flash operations
9195 # Selecting this option will cause the drivers to print status
9196 # messages as various flash operations are undertaken.
9198 cdl_option CYGSEM_IO_FLASH_CHATTER {
9200 # No user value, uncomment the following line to provide one.
9202 # value_source default
9206 # Verify data programmed to flash
9207 # Selecting this option will cause verification of data
9208 # programmed to flash.
9210 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9212 # No user value, uncomment the following line to provide one.
9214 # The inferred value should not be edited directly.
9216 # value_source inferred
9219 # The following properties are affected by this value
9220 # option CYGSEM_IO_FLASH_READ_INDIRECT
9221 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9224 # Platform has flash soft DIP switch write-protect
9225 # Selecting this option will cause the state of a hardware jumper or
9226 # dipswitch to be read by software to determine whether the flash is
9227 # write-protected or not.
9229 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9231 # No user value, uncomment the following line to provide one.
9233 # value_source default
9237 # Instantiate in I/O block device API
9238 # Provides a block device accessible using the standard I/O
9239 # API ( cyg_io_read() etc. )
9241 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9242 # This option is not active
9243 # ActiveIf constraint: CYGPKG_IO
9244 # CYGPKG_IO (unknown) == 0
9248 # No user value, uncomment the following line to provide one.
9250 # value_source default
9255 # Name of flash device 1 block device
9257 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9258 # This option is not active
9259 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9260 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9263 # No user value, uncomment the following line to provide one.
9264 # user_value "\"/dev/flash1\""
9265 # value_source default
9266 # Default value: "\"/dev/flash1\""
9271 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9272 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9273 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9274 # This option is not active
9275 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9277 # This value cannot be modified here.
9280 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9281 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9284 # The following properties are affected by this value
9285 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9286 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9289 # Static configuration
9290 # This configures the flash device 1 block device
9291 # with static base and length
9293 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9294 # This option is not active
9295 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9298 # No user value, uncomment the following line to provide one.
9300 # value_source default
9305 # Start offset from flash base
9306 # This gives the offset from the base of flash which this
9307 # block device corresponds to.
9309 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9310 # This option is not active
9311 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9314 # No user value, uncomment the following line to provide one.
9315 # user_value 0x00100000
9316 # value_source default
9317 # Default value: 0x00100000
9321 # This gives the length of the region of flash given over
9322 # to this block device.
9324 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9325 # This option is not active
9326 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9329 # No user value, uncomment the following line to provide one.
9330 # user_value 0x00100000
9331 # value_source default
9332 # Default value: 0x00100000
9336 # Configuration from FIS
9337 # This configures the flash device 1 block device
9340 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9341 # This option is not active
9342 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9345 # No user value, uncomment the following line to provide one.
9347 # value_source default
9354 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9355 # This option is not active
9356 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9357 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9360 # No user value, uncomment the following line to provide one.
9361 # user_value "\"jffs2\""
9362 # value_source default
9363 # Default value: "\"jffs2\""
9369 # Flash device driver build options
9370 # Package specific build options including control over
9371 # compiler flags used only in building this package,
9372 # and details of which tests are built.
9374 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9375 # There is no associated value.
9379 # Additional compiler flags
9380 # This option modifies the set of compiler flags for
9381 # building the flash device drivers. These flags are used in addition
9382 # to the set of global flags.
9384 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9386 # No user value, uncomment the following line to provide one.
9388 # value_source default
9392 # Suppressed compiler flags
9393 # This option modifies the set of compiler flags for
9394 # building the flash device drivers. These flags are removed from
9395 # the set of global flags if present.
9397 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9399 # No user value, uncomment the following line to provide one.
9401 # value_source default
9405 # Flash device driver tests
9406 # This option specifies the set of tests for the flash device drivers.
9408 cdl_component CYGPKG_IO_FLASH_TESTS {
9409 # Calculated value: "tests/flash1"
9411 # Current_value: tests/flash1
9415 # Start offset from flash base
9416 # This gives the offset from the base of flash where tests
9417 # can be run. It is important to set this correctly, as an
9418 # incorrect value could allow the tests to write over critical
9419 # portions of the FLASH device and possibly render the target
9420 # board totally non-functional.
9422 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9424 # No user value, uncomment the following line to provide one.
9425 # user_value 0x00100000
9426 # value_source default
9427 # Default value: 0x00100000
9431 # This gives the length of the region of flash used for testing.
9433 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9435 # No user value, uncomment the following line to provide one.
9436 # user_value 0x00100000
9437 # value_source default
9438 # Default value: 0x00100000
9443 # Support FLASH memory on Freescale MXC platforms
9445 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9446 # Packages cannot be added or removed, nor can their version be changed,
9447 # simply by editing their value. Instead the appropriate configuration
9448 # should be used to perform these actions.
9450 # ActiveIf constraint: CYGPKG_IO_FLASH
9451 # CYGPKG_IO_FLASH == current
9454 # This value cannot be modified here.
9456 # Current value: 1 current
9460 # MXC platform MMC card support
9461 # When this option is enabled, it indicates MMC card is
9462 # supported on the MXC platforms
9464 cdl_component CYGHWR_DEVS_FLASH_MMC {
9466 # No user value, uncomment the following line to provide one.
9468 # value_source default
9470 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9471 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9474 # The following properties are affected by this value
9475 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9476 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9477 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9478 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9479 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9480 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9481 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9482 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9486 # MXC platform MMC card for newer SDHC controllers
9488 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9489 # This option is not active
9490 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9491 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
9492 # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0
9493 # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0
9494 # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0
9495 # CYGPKG_HAL_ARM_MX51 == current
9499 # No user value, uncomment the following line to provide one.
9501 # value_source default
9503 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9504 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9508 # MXC platform MMC card for older MMC/SD controllers
9510 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9511 # This option is not active
9512 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9513 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9514 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9515 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9519 # No user value, uncomment the following line to provide one.
9521 # value_source default
9523 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9524 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9529 # MXC platform NOR flash memory support
9530 # When this option is enabled, it indicates NOR flash is
9531 # supported on the MXC platforms
9533 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9535 # No user value, uncomment the following line to provide one.
9537 # The inferred value should not be edited directly.
9539 # value_source inferred
9542 # The following properties are affected by this value
9543 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9544 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9545 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9546 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9547 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9548 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9549 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9550 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9551 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9552 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9555 # MXC platform NAND flash memory support
9556 # When this option is enabled, it indicates NAND flash is
9557 # supported on the MXC platforms
9559 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9561 # No user value, uncomment the following line to provide one.
9563 # The inferred value should not be edited directly.
9565 # value_source inferred
9567 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9568 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9571 # The following properties are affected by this value
9572 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9573 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9574 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9575 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9576 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9577 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9578 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9579 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9580 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9581 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9582 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9583 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9586 # i.MX platform SPI NOR flash memory support
9587 # When this option is enabled, it indicates SPI NOR flash is
9588 # supported on the i.MX platforms
9590 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9592 # No user value, uncomment the following line to provide one.
9594 # value_source default
9596 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9597 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9601 # MXC platform ATA support
9602 # When this option is enabled, it indicates ATA is
9603 # supported on the MXC platforms
9605 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9607 # No user value, uncomment the following line to provide one.
9609 # value_source default
9613 # Use a flash based Bad Block Table
9615 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9616 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9617 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9620 # There is no associated value.
9624 # When this option is enabled, the driver will search for a flash
9625 # based bad block table
9627 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9629 # No user value, uncomment the following line to provide one.
9631 # value_source default
9635 # header file defining the NAND BBT descriptor
9636 # defines the name of the header file that describes the BBT layout
9638 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9640 # No user value, uncomment the following line to provide one.
9642 # The inferred value should not be edited directly.
9643 inferred_value 1 <cyg/io/tx51_nand_bbt.h>
9644 # value_source inferred
9645 # Default value: 0 0
9648 # Number of blocks to reserve for BBT
9649 # Number of blocks to reserve for BBT
9651 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9653 # No user value, uncomment the following line to provide one.
9655 # value_source default
9660 # MXC platform multi flash memory support
9661 # When this option is enabled, it indicates multi flashes are
9662 # supported on the MXC platforms (like NAND and NOR)
9664 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9665 # This option is not active
9666 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9667 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9668 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9669 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9670 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9671 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9672 # CYGHWR_DEVS_FLASH_MMC == 0
9673 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9674 # CYGHWR_DEVS_FLASH_MMC == 0
9678 # No user value, uncomment the following line to provide one.
9680 # The inferred value should not be edited directly.
9682 # value_source inferred
9686 # MXC platform NAND flash reset workaround support
9687 # When this option is enabled, it indicates 0xFFFF is used for
9688 # the NAND reset command instead of 0xFF.
9690 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9691 # No options implement this inferface
9692 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9693 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9696 # This value cannot be modified here.
9703 # Dynamic memory allocation
9704 # doc: ref/memalloc.html
9705 # This package provides memory allocator infrastructure required for
9706 # dynamic memory allocators, including the ISO standard malloc
9707 # interface. It also contains some sample implementations.
9709 cdl_package CYGPKG_MEMALLOC {
9710 # Packages cannot be added or removed, nor can their version be changed,
9711 # simply by editing their value. Instead the appropriate configuration
9712 # should be used to perform these actions.
9714 # This value cannot be modified here.
9716 # Current value: 1 current
9718 # The following properties are affected by this value
9719 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9720 # Requires: CYGPKG_MEMALLOC
9724 # Memory allocator implementations
9725 # This component contains configuration options related to the
9726 # various memory allocators available.
9728 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9729 # There is no associated value.
9733 # Fixed block allocator
9734 # This component contains configuration options related to the
9735 # fixed block memory allocator.
9737 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9738 # There is no associated value.
9743 # With this option enabled, this allocator will be
9744 # made thread-safe. Additionally allocation functions
9745 # are made available that allow a thread to wait
9746 # until memory is available.
9748 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9749 # This option is not active
9750 # ActiveIf constraint: CYGPKG_KERNEL
9751 # CYGPKG_KERNEL (unknown) == 0
9755 # No user value, uncomment the following line to provide one.
9757 # value_source default
9762 # Simple variable block allocator
9763 # This component contains configuration options related to the
9764 # simple variable block memory allocator. This allocator is not
9765 # very fast, and in particular does not scale well with large
9766 # numbers of allocations. It is however very compact in terms of
9767 # code size and does not have very much overhead per allocation.
9769 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9770 # There is no associated value.
9775 # With this option enabled, this allocator will be
9776 # made thread-safe. Additionally allocation functions
9777 # are added that allow a thread to wait until memory
9778 # are made available that allow a thread to wait
9779 # until memory is available.
9781 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9782 # This option is not active
9783 # ActiveIf constraint: CYGPKG_KERNEL
9784 # CYGPKG_KERNEL (unknown) == 0
9788 # No user value, uncomment the following line to provide one.
9790 # value_source default
9795 # The variable-block memory allocator can perform coalescing
9796 # of memory whenever the application code releases memory back
9797 # to the pool. This coalescing reduces the possibility of
9798 # memory fragmentation problems, but involves extra code and
9801 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9803 # No user value, uncomment the following line to provide one.
9805 # value_source default
9808 # The following properties are affected by this value
9809 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9810 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9815 # This component contains configuration options related to the
9816 # port of Doug Lea's memory allocator, normally known as
9817 # dlmalloc. dlmalloc has a reputation for being both fast
9818 # and space-conserving, as well as resisting fragmentation well.
9819 # It is a common choice for a general purpose allocator and
9820 # has been used in both newlib and Linux glibc.
9822 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9823 # There is no associated value.
9828 # Doug Lea's malloc implementation has substantial amounts
9829 # of internal checking in order to verify the operation
9830 # and consistency of the allocator. However this imposes
9831 # substantial overhead on each operation. Therefore this
9832 # checking may be individually disabled.
9834 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9836 # No user value, uncomment the following line to provide one.
9838 # value_source default
9839 # Default value: 0 != CYGDBG_USE_ASSERTS
9840 # CYGDBG_USE_ASSERTS == 0
9842 # Requires: CYGDBG_USE_ASSERTS
9843 # CYGDBG_USE_ASSERTS == 0
9848 # With this option enabled, this allocator will be
9849 # made thread-safe. Additionally allocation functions
9850 # are made available that allow a thread to wait
9851 # until memory is available.
9853 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9854 # This option is not active
9855 # ActiveIf constraint: CYGPKG_KERNEL
9856 # CYGPKG_KERNEL (unknown) == 0
9860 # No user value, uncomment the following line to provide one.
9862 # value_source default
9864 # Requires: CYGPKG_KERNEL
9865 # CYGPKG_KERNEL (unknown) == 0
9869 # Support more than one instance
9870 # Having this option disabled allows important
9871 # implementation structures to be declared as a single
9872 # static instance, allowing faster access. However this
9873 # would fail if there is more than one instance of
9874 # the dlmalloc allocator class. Therefore this option can
9875 # be enabled if multiple instances are required. Note: as
9876 # a special case, if this allocator is used as the
9877 # implementation of malloc, and it can be determined there
9878 # is more than one malloc pool, then this option will be
9881 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9883 # No user value, uncomment the following line to provide one.
9885 # value_source default
9889 # Use system memmove() and memset()
9890 # This may be used to control whether memset() and memmove()
9891 # are used within the implementation. The alternative is
9892 # to use some macro equivalents, which some people report
9893 # are faster in some circumstances.
9895 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9897 # No user value, uncomment the following line to provide one.
9899 # value_source default
9900 # Default value: 0 != CYGPKG_ISOINFRA
9901 # CYGPKG_ISOINFRA == current
9903 # Requires: CYGPKG_ISOINFRA
9904 # CYGPKG_ISOINFRA == current
9908 # Minimum alignment of allocated blocks
9909 # This option controls the minimum alignment that the
9910 # allocated memory blocks are aligned on, specified as
9911 # 2^N. Note that using large mininum alignments can lead
9912 # to excessive memory wastage.
9914 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9916 # No user value, uncomment the following line to provide one.
9918 # value_source default
9920 # Legal values: 3 to 10
9924 # Variable block allocator with separate metadata
9925 # This component contains configuration options related to the
9926 # variable block memory allocator with separate metadata.
9928 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9929 # There is no associated value.
9934 # With this option enabled, this allocator will be
9935 # made thread-safe. Additionally allocation functions
9936 # are made available that allow a thread to wait
9937 # until memory is available.
9939 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9940 # This option is not active
9941 # ActiveIf constraint: CYGPKG_KERNEL
9942 # CYGPKG_KERNEL (unknown) == 0
9946 # No user value, uncomment the following line to provide one.
9948 # value_source default
9954 # Kernel C API support for memory allocation
9955 # This option must be enabled to provide the extensions required
9956 # to support integration into the kernel C API.
9958 cdl_option CYGFUN_MEMALLOC_KAPI {
9959 # This option is not active
9960 # ActiveIf constraint: CYGPKG_KERNEL
9961 # CYGPKG_KERNEL (unknown) == 0
9965 # No user value, uncomment the following line to provide one.
9967 # value_source default
9968 # Default value: CYGFUN_KERNEL_API_C
9969 # CYGFUN_KERNEL_API_C (unknown) == 0
9973 # malloc(0) returns NULL
9974 # This option controls the behavior of malloc(0) ( or calloc with
9975 # either argument 0 ). It is permitted by the standard to return
9976 # either a NULL pointer or a unique pointer. Enabling this option
9977 # forces a NULL pointer to be returned.
9979 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9981 # No user value, uncomment the following line to provide one.
9983 # value_source default
9987 # Breakpoint site when running out of memory
9988 # Whenever the system runs out of memory, it invokes this function
9989 # before either going to sleep waiting for memory to become
9990 # available or returning failure.
9992 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9994 # No user value, uncomment the following line to provide one.
9996 # value_source default
10000 # malloc() and supporting allocators
10001 # This component enables support for dynamic memory
10002 # allocation as supplied by the functions malloc(),
10003 # free(), calloc() and realloc(). As these
10004 # functions are often used, but can have quite an
10005 # overhead, disabling them here can ensure they
10006 # cannot even be used accidentally when static
10007 # allocation is preferred. Within this component are
10008 # various allocators that can be selected for use
10009 # as the underlying implementation of the dynamic
10010 # allocation functions.
10012 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10013 # ActiveIf constraint: CYGPKG_ISOINFRA
10014 # CYGPKG_ISOINFRA == current
10018 # No user value, uncomment the following line to provide one.
10020 # value_source default
10025 # Use external heap definition
10026 # This option allows other components in the
10027 # system to override the default system
10028 # provision of heap memory pools. This should
10029 # be set to a header which provides the equivalent
10030 # definitions to <pkgconf/heaps.hxx>.
10032 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10034 # No user value, uncomment the following line to provide one.
10036 # value_source default
10037 # Default value: 0 0
10040 # Use external implementation of joining multiple heaps
10041 # The default implementation of joining multiple heaps
10042 # is fine for the case where there are multiple disjoint
10043 # memory regions of the same type. However, in a system
10044 # there might be e.g. a small amount of internal SRAM and
10045 # a large amount of external DRAM. The SRAM is faster and
10046 # the DRAM is slower. An application can implement some
10047 # heuristic to choose which pool to allocate from. This
10048 # heuristic can be highly application specific.
10050 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10052 # No user value, uncomment the following line to provide one.
10054 # value_source default
10055 # Default value: 0 0
10058 # malloc() allocator implementations
10060 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10061 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10062 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10063 # This value cannot be modified here.
10066 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10067 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10070 # The following properties are affected by this value
10071 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10072 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10075 # malloc() implementation instantiation data
10076 # Memory allocator implementations that are capable of being
10077 # used underneath malloc() must be instantiated. The code
10078 # to do this is set in this option. It is only intended to
10079 # be set by the implementation, not the user.
10081 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10083 # No user value, uncomment the following line to provide one.
10084 # user_value <cyg/memalloc/dlmalloc.hxx>
10085 # value_source default
10086 # Default value: <cyg/memalloc/dlmalloc.hxx>
10088 # The following properties are affected by this value
10089 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10090 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10091 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10092 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10095 # Simple variable block implementation
10096 # This causes malloc() to use the simple
10097 # variable block allocator.
10099 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10101 # No user value, uncomment the following line to provide one.
10103 # value_source default
10105 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10106 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10108 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10109 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10113 # Doug Lea's malloc implementation
10114 # This causes malloc() to use a version of Doug Lea's
10115 # malloc (dlmalloc) as the underlying implementation.
10117 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10119 # No user value, uncomment the following line to provide one.
10121 # value_source default
10123 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10124 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10129 # Size of the fallback dynamic memory pool in bytes
10130 # If *no* heaps are configured in your memory layout,
10131 # dynamic memory allocation by
10132 # malloc() and calloc() must be from a fixed-size,
10133 # contiguous memory pool (note here that it is the
10134 # pool that is of a fixed size, but malloc() is still
10135 # able to allocate variable sized chunks of memory
10136 # from it). This option is the size
10137 # of that pool, in bytes. Note that not all of
10138 # this is available for programs to
10139 # use - some is needed for internal information
10140 # about memory regions, and some may be lost to
10141 # ensure that memory allocation only returns
10142 # memory aligned on word (or double word)
10143 # boundaries - a very common architecture
10146 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10148 # No user value, uncomment the following line to provide one.
10150 # value_source default
10151 # Default value: 16384
10152 # Legal values: 32 to 0x7fffffff
10155 # Common memory allocator package build options
10156 # Package specific build options including control over
10157 # compiler flags used only in building this package,
10158 # and details of which tests are built.
10160 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10161 # There is no associated value.
10165 # Additional compiler flags
10166 # This option modifies the set of compiler flags for
10167 # building this package. These flags are used in addition
10168 # to the set of global flags.
10170 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10172 # No user value, uncomment the following line to provide one.
10173 # user_value "-fno-rtti -Woverloaded-virtual"
10174 # value_source default
10175 # Default value: "-fno-rtti -Woverloaded-virtual"
10178 # Suppressed compiler flags
10179 # This option modifies the set of compiler flags for
10180 # building this package. These flags are removed from
10181 # the set of global flags if present.
10183 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10185 # No user value, uncomment the following line to provide one.
10186 # user_value -Wno-pointer-sign
10187 # value_source default
10188 # Default value: -Wno-pointer-sign
10192 # This option specifies the set of tests for this package.
10194 cdl_option CYGPKG_MEMALLOC_TESTS {
10195 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10197 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10202 # Common error code support
10203 # This package contains the common list of error and
10204 # status codes. It is held centrally to allow
10205 # packages to interchange error codes and status
10206 # codes in a common way, rather than each package
10207 # having its own conventions for error/status
10208 # reporting. The error codes are modelled on the
10209 # POSIX style naming e.g. EINVAL etc. This package
10210 # also provides the standard strerror() function to
10211 # convert error codes to textual representation, as
10212 # well as an implementation of the errno idiom.
10214 cdl_package CYGPKG_ERROR {
10215 # Packages cannot be added or removed, nor can their version be changed,
10216 # simply by editing their value. Instead the appropriate configuration
10217 # should be used to perform these actions.
10219 # This value cannot be modified here.
10221 # Current value: 1 current
10222 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10223 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10229 # This package controls the behaviour of the
10230 # errno variable (or more strictly, expression)
10233 cdl_component CYGPKG_ERROR_ERRNO {
10235 # No user value, uncomment the following line to provide one.
10237 # value_source default
10239 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10240 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10246 # This option controls whether the standard error
10247 # code reporting variable errno is a per-thread
10248 # variable, rather than global.
10250 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10252 # No user value, uncomment the following line to provide one.
10254 # The inferred value should not be edited directly.
10256 # value_source inferred
10258 # Requires: CYGVAR_KERNEL_THREADS_DATA
10259 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10264 # Trace verbosity level for debugging the errno
10265 # retrieval mechanism in errno.cxx. Increase this
10266 # value to get additional trace output.
10268 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10270 # No user value, uncomment the following line to provide one.
10272 # value_source default
10274 # Legal values: 0 to 1
10278 # strerror function
10279 # This package controls the presence and behaviour of the
10280 # strerror() function from <string.h>
10282 cdl_option CYGPKG_ERROR_STRERROR {
10284 # No user value, uncomment the following line to provide one.
10286 # value_source default
10288 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10289 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10293 # Error package build options
10294 # Package specific build options including control over
10295 # compiler flags used only in building this package,
10296 # and details of which tests are built.
10298 cdl_component CYGPKG_ERROR_OPTIONS {
10299 # There is no associated value.
10303 # Additional compiler flags
10304 # This option modifies the set of compiler flags for
10305 # building the error package. These flags are used in addition
10306 # to the set of global flags.
10308 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10310 # No user value, uncomment the following line to provide one.
10312 # value_source default
10313 # Default value: ""
10316 # Suppressed compiler flags
10317 # This option modifies the set of compiler flags for
10318 # building the error package. These flags are removed from
10319 # the set of global flags if present.
10321 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10323 # No user value, uncomment the following line to provide one.
10325 # value_source default
10326 # Default value: ""
10331 # I2C driver for FSL MXC-based platforms
10333 cdl_package CYGPKG_DEVS_MXC_I2C {
10334 # Packages cannot be added or removed, nor can their version be changed,
10335 # simply by editing their value. Instead the appropriate configuration
10336 # should be used to perform these actions.
10338 # This value cannot be modified here.
10340 # Current value: 1 current
10343 # ipu driver for mxc
10345 cdl_package CYGPKG_DEVS_IMX_IPU {
10346 # Packages cannot be added or removed, nor can their version be changed,
10347 # simply by editing their value. Instead the appropriate configuration
10348 # should be used to perform these actions.
10350 # This value cannot be modified here.
10352 # Current value: 1 current
10354 # The following properties are affected by this value
10355 # option CYGHWR_MX51_LCD_LOGO
10356 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10360 # IPU version 3EX support
10361 # When this option is enabled, it indicates the IPU version
10364 cdl_option CYGHWR_DEVS_IPU_3_EX {
10366 # No user value, uncomment the following line to provide one.
10368 # The inferred value should not be edited directly.
10370 # value_source inferred
10374 # IPU version 3D support
10375 # When this option is enabled, it indicates the IPU version
10378 cdl_option CYGHWR_DEVS_IPU_3_D {
10380 # No user value, uncomment the following line to provide one.
10382 # value_source default