1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX51 current ;
34 package -hardware CYGPKG_HAL_ARM_TX51KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX51 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX51
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX51 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX51 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX51 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX51KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # This option is not active
803 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
804 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
805 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
809 # No user value, uncomment the following line to provide one.
811 # value_source default
816 # Ethernet transceiver (PHY) support
817 # API for ethernet PHY devices
819 cdl_package CYGPKG_DEVS_ETH_PHY {
820 # Packages cannot be added or removed, nor can their version be changed,
821 # simply by editing their value. Instead the appropriate configuration
822 # should be used to perform these actions.
824 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
825 # CYGPKG_IO_ETH_DRIVERS == current
828 # This value cannot be modified here.
830 # Current value: 1 current
831 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
832 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
837 # Enable driver debugging
838 # Enables the diagnostic debug messages on the
841 cdl_option CYGDBG_DEVS_ETH_PHY {
843 # No user value, uncomment the following line to provide one.
845 # value_source default
849 # Time period (seconds) to wait for auto-negotiation
850 # The length of time to wait for auto-negotiation to complete
851 # before giving up and declaring the link dead/missing.
853 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
855 # No user value, uncomment the following line to provide one.
857 # value_source default
862 # Include support for National Semiconductor DP83847 DsPHYTER II
864 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
866 # No user value, uncomment the following line to provide one.
868 # value_source default
873 # Include support for AMD 79C874 NetPHY
875 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
877 # No user value, uncomment the following line to provide one.
879 # value_source default
884 # Include support for Intel LXT972xxx PHY
886 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
888 # No user value, uncomment the following line to provide one.
890 # value_source default
895 # Include support for ICS 1890 PHY
897 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
899 # No user value, uncomment the following line to provide one.
901 # value_source default
906 # Include support for ICS 1892 PHY
908 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
910 # No user value, uncomment the following line to provide one.
912 # value_source default
917 # Include support for ICS 1893 and 1893AF PHY
919 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
921 # No user value, uncomment the following line to provide one.
923 # value_source default
928 # Include support for the Davicom DM9161A PHY
930 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
932 # No user value, uncomment the following line to provide one.
934 # value_source default
939 # Include support for the Micrel KS8721 PHY
941 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
943 # No user value, uncomment the following line to provide one.
945 # value_source default
950 # Include support for SMSC LAN8700 NetPHY
952 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
954 # No user value, uncomment the following line to provide one.
956 # The inferred value should not be edited directly.
958 # value_source inferred
961 # The following properties are affected by this value
962 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
963 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
968 # ISO C library internationalization functions
970 # This package provides internationalization functions specified by the
971 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
972 # functionality and <ctype.h> functionality.
974 cdl_package CYGPKG_LIBC_I18N {
975 # Packages cannot be added or removed, nor can their version be changed,
976 # simply by editing their value. Instead the appropriate configuration
977 # should be used to perform these actions.
979 # This value cannot be modified here.
981 # Current value: 1 current
982 # Requires: CYGPKG_ISOINFRA
983 # CYGPKG_ISOINFRA == current
989 # These options determine which locales other than the "C" locale
990 # are supported and hence contribute to the size of the executable.
992 cdl_component CYGPKG_LIBC_I18N_LOCALES {
993 # There is no associated value.
997 # Support for multiple locales required
999 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1002 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1003 # This value cannot be modified here.
1005 # Current value: 0 0
1006 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1007 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1010 # The following properties are affected by this value
1013 # C-SJIS locale support
1014 # This option controls if the "C-SJIS" locale will be
1015 # supported by setlocale(). The locale is a hybrid locale
1016 # that is mostly the "C" locale with Japanese SJIS multibyte
1019 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1021 # No user value, uncomment the following line to provide one.
1023 # value_source default
1026 # The following properties are affected by this value
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1033 # C-JIS locale support
1034 # This option controls if the "C-JIS" locale will be
1035 # supported by setlocale(). The locale is a hybrid locale
1036 # that is mostly the "C" locale with Japanese JIS multibyte
1039 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1041 # No user value, uncomment the following line to provide one.
1043 # value_source default
1046 # The following properties are affected by this value
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1053 # C-EUCJP locale support
1054 # This option controls if the "C-EUCJP" locale will be
1055 # supported by setlocale(). The locale is a hybrid locale
1056 # that is mostly the "C" locale with Japanese EUCJP multibyte
1059 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1061 # No user value, uncomment the following line to provide one.
1063 # value_source default
1066 # The following properties are affected by this value
1067 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1068 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1069 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1070 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1074 # Newlib's ctype implementation
1075 # This option enables the implementation of the ctype functions
1076 # that comes with newlib. It is table driven and therefore
1077 # exhibits different performance characteristics. It also offers
1078 # a limited amount of binary compatibility
1079 # with newlib so that programs linked against newlib ctype/locale
1080 # do not need to be recompiled when linked with eCos.
1082 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1084 # No user value, uncomment the following line to provide one.
1086 # value_source default
1088 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1089 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1093 # Per-thread multibyte state
1094 # This option controls whether the multibyte character
1095 # handling functions mblen(), mbtowc(), and wctomb(),
1096 # have their state recorded on a per-thread
1097 # basis rather than global. If this option is
1098 # disabled, some per-thread space can be saved.
1099 # Enabling this option will use three slots
1100 # of kernel per-thread data. You should ensure you
1101 # have enough slots configured for all your
1104 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1105 # This option is not active
1106 # ActiveIf constraint: CYGPKG_KERNEL
1107 # CYGPKG_KERNEL (unknown) == 0
1111 # No user value, uncomment the following line to provide one.
1113 # value_source default
1114 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1115 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1117 # Requires: CYGVAR_KERNEL_THREADS_DATA
1118 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1122 # Size of locale name strings
1123 # This option controls the maximum size of
1124 # locale names and is used, among other things
1125 # to instantiate a static string used
1126 # as a return value from the
1127 # setlocale() function. When requesting the
1128 # current locale settings with LC_ALL, a string
1129 # must be constructed to contain this data, rather
1130 # than just returning a constant string. This
1131 # string data is stored in the static string.
1132 # This depends on the length of locale names,
1133 # hence this option. If just the C locale is
1134 # present, this option can be set as low as 2.
1136 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1138 # No user value, uncomment the following line to provide one.
1140 # value_source default
1141 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1142 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1144 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1146 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1147 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1149 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1152 # Inline versions of <ctype.h> functions
1153 # This option chooses whether the simple character
1154 # classification and conversion functions (e.g.
1155 # isupper(), isalpha(), toupper(), etc.)
1156 # from <ctype.h> are available as inline
1157 # functions. This may improve performance and as
1158 # the functions are small, may even improve code
1161 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1163 # No user value, uncomment the following line to provide one.
1165 # value_source default
1167 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1168 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1172 # C library i18n functions build options
1173 # Package specific build options including control over
1174 # compiler flags used only in building this package,
1175 # and details of which tests are built.
1177 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1178 # There is no associated value.
1182 # Additional compiler flags
1183 # This option modifies the set of compiler flags for
1184 # building the C library. These flags are used in addition
1185 # to the set of global flags.
1187 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1189 # No user value, uncomment the following line to provide one.
1190 # user_value "-fno-rtti -Woverloaded-virtual"
1191 # value_source default
1192 # Default value: "-fno-rtti -Woverloaded-virtual"
1195 # Suppressed compiler flags
1196 # This option modifies the set of compiler flags for
1197 # building the C library. These flags are removed from
1198 # the set of global flags if present.
1200 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1202 # No user value, uncomment the following line to provide one.
1203 # user_value -Wno-pointer-sign
1204 # value_source default
1205 # Default value: -Wno-pointer-sign
1208 # C library i18n function tests
1209 # This option specifies the set of tests for the C library
1212 cdl_option CYGPKG_LIBC_I18N_TESTS {
1213 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1215 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1220 # ISO C library general utility functions
1221 # doc: ref/libc.html
1222 # This package provides general utility functions in <stdlib.h>
1223 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1225 cdl_package CYGPKG_LIBC_STDLIB {
1226 # Packages cannot be added or removed, nor can their version be changed,
1227 # simply by editing their value. Instead the appropriate configuration
1228 # should be used to perform these actions.
1230 # This value cannot be modified here.
1232 # Current value: 1 current
1233 # Requires: CYGPKG_ISOINFRA
1234 # CYGPKG_ISOINFRA == current
1236 # Requires: CYGINT_ISO_CTYPE
1237 # CYGINT_ISO_CTYPE == 1
1239 # Requires: CYGINT_ISO_STRING_STRFUNCS
1240 # CYGINT_ISO_STRING_STRFUNCS == 1
1245 # Inline versions of <stdlib.h> functions
1246 # This option chooses whether some of the
1247 # particularly simple standard utility functions
1248 # from <stdlib.h> are available as inline
1249 # functions. This may improve performance, and as
1250 # the functions are small, may even improve code
1253 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1254 # There is no associated value.
1260 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1262 # No user value, uncomment the following line to provide one.
1264 # value_source default
1266 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1267 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1273 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1275 # No user value, uncomment the following line to provide one.
1277 # value_source default
1279 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1280 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1284 # atof() / atoi() / atol()
1286 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1288 # No user value, uncomment the following line to provide one.
1290 # value_source default
1292 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1293 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1298 # Random number generation
1299 # These options control the behaviour of the
1300 # functions rand(), srand() and rand_r()
1302 cdl_component CYGPKG_LIBC_RAND {
1303 # There is no associated value.
1307 # Per-thread random seed
1308 # doc: ref/libc-thread-safety.html
1309 # This option controls whether the pseudo-random
1310 # number generation functions rand() and srand()
1311 # have their state recorded on a per-thread
1312 # basis rather than global. If this option is
1313 # disabled, some per-thread space can be saved.
1314 # Note there is also a POSIX-standard rand_r()
1315 # function to achieve a similar effect with user
1316 # support. Enabling this option will use one slot
1317 # of kernel per-thread data. You should ensure you
1318 # have enough slots configured for all your
1321 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1323 # No user value, uncomment the following line to provide one.
1325 # value_source default
1327 # Requires: CYGVAR_KERNEL_THREADS_DATA
1328 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1332 # Random number seed
1333 # This selects the initial random number seed for
1334 # rand()'s pseudo-random number generator. For
1335 # strict ISO standard compliance, this should be 1,
1336 # as per section 7.10.2.2 of the standard.
1338 cdl_option CYGNUM_LIBC_RAND_SEED {
1340 # No user value, uncomment the following line to provide one.
1342 # value_source default
1344 # Legal values: 0 to 0x7fffffff
1348 # Trace verbosity level for debugging the rand(),
1349 # srand() and rand_r() functions. Increase this
1350 # value to get additional trace output.
1352 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1354 # No user value, uncomment the following line to provide one.
1356 # value_source default
1358 # Legal values: 0 to 1
1361 # Simplest implementation
1362 # This provides a very simple implementation of rand()
1363 # that does not perform well with randomness in the
1364 # lower significant bits. However it is exceptionally
1365 # fast. It uses the sample algorithm from the ISO C
1368 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1370 # No user value, uncomment the following line to provide one.
1372 # value_source default
1376 # Simple implementation #1
1377 # This provides a very simple implementation of rand()
1378 # based on the simplest implementation above. However
1379 # it does try to work around the lack of randomness
1380 # in the lower significant bits, at the expense of a
1383 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1390 # Knuth implementation #1
1391 # This implements a slightly more complex algorithm
1392 # published in Donald E. Knuth's Art of Computer
1393 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1394 # This produces better random numbers than the
1395 # simplest approach but is slower.
1397 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1406 # This option allows use of the utility function
1407 # strtod() (and consequently atof()) to convert
1408 # from string to double precision floating point
1409 # numbers. Disabling this option removes the
1410 # dependency on the math library package.
1412 cdl_option CYGFUN_LIBC_strtod {
1414 # No user value, uncomment the following line to provide one.
1416 # value_source default
1417 # Default value: 0 != CYGPKG_LIBM
1418 # CYGPKG_LIBM (unknown) == 0
1420 # Requires: CYGPKG_LIBM
1421 # CYGPKG_LIBM (unknown) == 0
1425 # Provides long long conversion functions
1426 # Enabling this option will provide support for the strtoll(),
1427 # strtoull() and atoll() conversion functions, which are
1428 # the long long variants of the standard versions of these
1429 # functions. Supporting this requires extra code and compile
1432 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1439 # bsearch() tracing level
1440 # Trace verbosity level for debugging the <stdlib.h>
1441 # binary search function bsearch(). Increase this
1442 # value to get additional trace output.
1444 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1446 # No user value, uncomment the following line to provide one.
1448 # value_source default
1450 # Legal values: 0 to 1
1453 # qsort() tracing level
1454 # Trace verbosity level for debugging the <stdlib.h>
1455 # quicksort function qsort(). Increase this value
1456 # to get additional trace output.
1458 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1460 # No user value, uncomment the following line to provide one.
1462 # value_source default
1464 # Legal values: 0 to 1
1467 # C library stdlib build options
1468 # Package specific build options including control over
1469 # compiler flags used only in building this package,
1470 # and details of which tests are built.
1472 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1473 # There is no associated value.
1477 # Additional compiler flags
1478 # This option modifies the set of compiler flags for
1479 # building this package. These flags are used in addition
1480 # to the set of global flags.
1482 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1484 # No user value, uncomment the following line to provide one.
1485 # user_value "-fno-rtti -Woverloaded-virtual"
1486 # value_source default
1487 # Default value: "-fno-rtti -Woverloaded-virtual"
1490 # Suppressed compiler flags
1491 # This option modifies the set of compiler flags for
1492 # building this package. These flags are removed from
1493 # the set of global flags if present.
1495 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1497 # No user value, uncomment the following line to provide one.
1498 # user_value -Wno-pointer-sign
1499 # value_source default
1500 # Default value: -Wno-pointer-sign
1503 # C library stdlib tests
1504 # This option specifies the set of tests for this package.
1506 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1507 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1509 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1516 # doc: ref/the-ecos-hardware-abstraction-layer.html
1517 # The eCos HAL package provide a porting layer for
1518 # higher-level parts of the system such as the kernel and the
1519 # C library. Each installation should have HAL packages for
1520 # one or more architectures, and for each architecture there
1521 # may be one or more supported platforms. It is necessary to
1522 # select one target architecture and one platform for that
1523 # architecture. There are also a number of configuration
1524 # options that are common to all HAL packages.
1526 cdl_package CYGPKG_HAL {
1527 # Packages cannot be added or removed, nor can their version be changed,
1528 # simply by editing their value. Instead the appropriate configuration
1529 # should be used to perform these actions.
1531 # This value cannot be modified here.
1533 # Current value: 1 current
1534 # Requires: CYGPKG_INFRA
1535 # CYGPKG_INFRA == current
1538 # The following properties are affected by this value
1542 # Platform-independent HAL options
1543 # A number of configuration options are common to most or all
1544 # HAL packages, for example options controlling how much state
1545 # should be saved during a context switch. The implementations
1546 # of these options will vary from architecture to architecture.
1548 cdl_component CYGPKG_HAL_COMMON {
1549 # There is no associated value.
1553 # Provide eCos kernel support
1554 # The HAL can be configured to either support the full eCos
1555 # kernel, or to support only very simple applications which do
1556 # not require a full kernel. If kernel support is not required
1557 # then some of the startup, exception, and interrupt handling
1558 # code can be eliminated.
1560 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1562 # No user value, uncomment the following line to provide one.
1564 # value_source default
1565 # Default value: CYGPKG_KERNEL
1566 # CYGPKG_KERNEL (unknown) == 0
1568 # Requires: CYGPKG_KERNEL
1569 # CYGPKG_KERNEL (unknown) == 0
1573 # HAL exception support
1574 # When a processor exception occurs, for example an attempt to
1575 # execute an illegal instruction or to perform a divide by
1576 # zero, this exception may be handled in a number of different
1577 # ways. If the target system has gdb support then typically
1578 # the exception will be handled by gdb code. Otherwise if the
1579 # HAL exception support is enabled then the HAL will invoke a
1580 # routine deliver_exception(). Typically this routine will be
1581 # provided by the eCos kernel, but it is possible for
1582 # application code to provide its own implementation. If the
1583 # HAL exception support is not enabled and a processor
1584 # exception occurs then the behaviour of the system is
1587 cdl_option CYGPKG_HAL_EXCEPTIONS {
1589 # No user value, uncomment the following line to provide one.
1591 # value_source default
1592 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1593 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1595 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1596 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1600 # Stop calling constructors early
1601 # This option supports environments where some constructors
1602 # must be run in the context of a thread rather than at
1603 # simple system startup time. A boolean flag named
1604 # cyg_hal_stop_constructors is set to 1 when constructors
1605 # should no longer be invoked. It is up to some other
1606 # package to deal with the rest of the constructors.
1607 # In the current version this is only possible with the
1610 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1612 # No user value, uncomment the following line to provide one.
1614 # value_source default
1616 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1617 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1621 # HAL uses the MMU and allows for CDL manipulation of it's use
1623 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1624 # No options implement this inferface
1625 # This value cannot be modified here.
1629 # The following properties are affected by this value
1630 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1631 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1634 # Install MMU tables.
1635 # This option controls whether this application installs
1636 # its own Memory Management Unit (MMU) tables, or relies on the
1637 # existing environment to run.
1639 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1640 # This option is not active
1641 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1642 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1646 # No user value, uncomment the following line to provide one.
1648 # value_source default
1649 # Default value: CYG_HAL_STARTUP != "RAM"
1650 # CYG_HAL_STARTUP == ROMRAM
1653 # The following properties are affected by this value
1654 # option CYGSEM_HAL_STATIC_MMU_TABLES
1655 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1658 # Use static MMU tables.
1659 # This option defines an environment where any Memory
1660 # Management Unit (MMU) tables are constant. Normally used by ROM
1661 # based environments, this provides a way to save RAM usage which
1662 # would otherwise be required for these tables.
1664 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1666 # No user value, uncomment the following line to provide one.
1668 # value_source default
1670 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1671 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1675 # Route diagnostic output to debug channel
1676 # If not inheriting the console setup from the ROM monitor,
1677 # it is possible to redirect diagnostic output to the debug
1678 # channel by enabling this option. Depending on the debugger
1679 # used it may also be necessary to select a mangler for the
1680 # output to be displayed by the debugger.
1682 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1683 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1684 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1686 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1687 # CYGPKG_HAL_ARM == current
1688 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1689 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1690 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1694 # No user value, uncomment the following line to provide one.
1696 # value_source default
1697 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1698 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1699 # CYG_HAL_STARTUP == ROMRAM
1702 # The following properties are affected by this value
1703 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1704 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1708 # Mangler used on diag output
1709 # It is sometimes necessary to mangle (encode) the
1710 # diag ASCII text output in order for it to show up at the
1711 # other end. In particular, GDB may silently ignore raw
1714 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1715 # This option is not active
1716 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1719 # No user value, uncomment the following line to provide one.
1721 # value_source default
1722 # Default value: GDB
1723 # Legal values: "GDB" "None"
1728 # HAL interrupt handling
1729 # A number of configuration options related to interrupt
1730 # handling are common to most or all HAL packages, even though
1731 # the implementations will vary from architecture to
1734 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1735 # There is no associated value.
1739 # Use separate stack for interrupts
1740 # When an interrupt occurs this interrupt can be handled either
1741 # on the current stack or on a separate stack maintained by the
1742 # HAL. Using a separate stack requires a small number of extra
1743 # instructions in the interrupt handling code, but it has the
1744 # advantage that it is no longer necessary to allow extra space
1745 # in every thread stack for the interrupt handlers. The amount
1746 # of extra space required depends on the interrupt handlers
1747 # that are being used.
1749 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1751 # No user value, uncomment the following line to provide one.
1753 # The inferred value should not be edited directly.
1755 # value_source inferred
1758 # The following properties are affected by this value
1759 # package CYGPKG_REDBOOT
1760 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1763 # Interrupt stack size
1764 # This configuration option specifies the stack size in bytes
1765 # for the interrupt stack. Typically this should be a multiple
1766 # of 16, but the exact requirements will vary from architecture
1767 # to architecture. The interrupt stack serves two separate
1768 # purposes. It is used as the stack during system
1769 # initialization. In addition, if the interrupt system is
1770 # configured to use a separate stack then all interrupts will
1771 # be processed on this stack. The exact memory requirements
1772 # will vary from application to application, and will depend
1773 # heavily on whether or not other interrupt-related options,
1774 # for example nested interrupts, are enabled. On most targets,
1775 # in a configuration with no kernel this stack will also be
1776 # the stack used to invoke the application, and must obviously
1777 # be appropriately large in that case.
1779 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1781 # No user value, uncomment the following line to provide one.
1783 # value_source default
1784 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1785 # CYGPKG_KERNEL (unknown) == 0
1787 # Legal values: 128 to 1048576
1790 # Allow nested interrupts
1791 # When an interrupt occurs the HAL interrupt handling code can
1792 # either leave interrupts disabled for the duration of the
1793 # interrupt handling code, or by doing some extra work it can
1794 # reenable interrupts before invoking the interrupt handler and
1795 # thus allow nested interrupts to happen. If all the interrupt
1796 # handlers being used are small and do not involve any loops
1797 # then it is usually better to disallow nested interrupts.
1798 # However if any of the interrupt handlers are more complicated
1799 # than nested interrupts will usually be required.
1801 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1803 # No user value, uncomment the following line to provide one.
1805 # value_source default
1809 # Save minimum context on interrupt
1810 # The HAL interrupt handling code can exploit the calling conventions
1811 # defined for a given architecture to reduce the amount of state
1812 # that has to be saved. Generally this improves performance and
1813 # reduces code size. However it can make source-level debugging
1816 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1818 # No user value, uncomment the following line to provide one.
1820 # The inferred value should not be edited directly.
1822 # value_source inferred
1825 # The following properties are affected by this value
1826 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1827 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1828 # component CYGBLD_BUILD_REDBOOT
1829 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1832 # Chain all interrupts together
1833 # Interrupts can be attached to vectors either singly, or be
1834 # chained together. The latter is necessary if there is no way
1835 # of discovering which device has interrupted without
1836 # inspecting the device itself. It can also reduce the amount
1837 # of RAM needed for interrupt decoding tables and code.
1839 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1841 # No user value, uncomment the following line to provide one.
1843 # value_source default
1847 # Ignore spurious [fleeting] interrupts
1848 # On some hardware, interrupt sources may not be de-bounced or
1849 # de-glitched. Rather than try to handle these interrupts (no
1850 # handling may be possible), this option allows the HAL to simply
1851 # ignore them. In most cases, if the interrupt is real it will
1852 # reoccur in a detectable form.
1854 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1856 # No user value, uncomment the following line to provide one.
1858 # value_source default
1863 # HAL context switch support
1864 # A number of configuration options related to thread contexts
1865 # are common to most or all HAL packages, even though the
1866 # implementations will vary from architecture to architecture.
1868 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1869 # There is no associated value.
1871 # The following properties are affected by this value
1875 # Use minimum thread context
1876 # The thread context switch code can exploit the calling
1877 # conventions defined for a given architecture to reduce the
1878 # amount of state that has to be saved during a context
1879 # switch. Generally this improves performance and reduces
1880 # code size. However it can make source-level debugging more
1883 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1885 # No user value, uncomment the following line to provide one.
1887 # The inferred value should not be edited directly.
1889 # value_source inferred
1892 # The following properties are affected by this value
1893 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1894 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1895 # component CYGBLD_BUILD_REDBOOT
1896 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1900 # Explicit control over cache behaviour
1901 # These options let the default behaviour of the caches
1902 # be easily configurable.
1904 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1905 # There is no associated value.
1909 # Enable DATA cache on startup
1910 # Enabling this option will cause the data cache to be enabled
1911 # as soon as practicable when eCos starts up. One would choose
1912 # to disable this if the data cache cannot safely be turned on,
1913 # such as a case where the cache(s) require additional platform
1916 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1918 # No user value, uncomment the following line to provide one.
1920 # value_source default
1925 # DATA cache mode on startup
1926 # This option controls the mode the cache will be set to
1927 # when enabled on startup.
1929 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1931 # No user value, uncomment the following line to provide one.
1932 # user_value COPYBACK
1933 # value_source default
1934 # Default value: COPYBACK
1935 # Legal values: "COPYBACK" "WRITETHRU"
1939 # Enable INSTRUCTION cache on startup
1940 # Enabling this option will cause the instruction cache to be enabled
1941 # as soon as practicable when eCos starts up. One would choose
1942 # to disable this if the instruction cache cannot safely be turned on,
1943 # such as a case where the cache(s) require additional platform
1946 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1948 # No user value, uncomment the following line to provide one.
1950 # value_source default
1955 # Source-level debugging support
1956 # If the source level debugger gdb is to be used for debugging
1957 # application code then it may be necessary to configure in support
1958 # for this in the HAL.
1960 cdl_component CYGPKG_HAL_DEBUG {
1961 # There is no associated value.
1965 # Support for GDB stubs
1966 # The HAL implements GDB stubs for the target.
1968 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1969 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
1970 # This value cannot be modified here.
1974 # The following properties are affected by this value
1975 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1976 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1977 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1978 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1981 # Include GDB stubs in HAL
1982 # This option causes a set of GDB stubs to be included into the
1983 # system. On some target systems the GDB support will be
1984 # provided by other means, for example by a ROM monitor. On
1985 # other targets, especially when building a ROM-booting system,
1986 # the necessary support has to go into the target library
1987 # itself. When GDB stubs are include in a configuration, HAL
1988 # serial drivers must also be included.
1990 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1991 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1992 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1996 # No user value, uncomment the following line to provide one.
1998 # The inferred value should not be edited directly.
2000 # value_source inferred
2002 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2003 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2005 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2006 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2008 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2009 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2011 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2013 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2016 # The following properties are affected by this value
2017 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2018 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2019 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2022 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2024 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2025 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2026 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2027 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2028 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2029 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2030 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2031 # option CYGPKG_HAL_GDB_FILEIO
2032 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2033 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2034 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2035 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2036 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2037 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2038 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2041 # Support for external break support in GDB stubs
2042 # The HAL implements external break (or asynchronous interrupt)
2043 # in the GDB stubs for the target.
2045 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2046 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
2047 # This value cannot be modified here.
2051 # The following properties are affected by this value
2052 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2053 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2056 # Include GDB external break support for stubs
2057 # This option causes the GDB stub to add a serial interrupt handler
2058 # which will listen for GDB break packets. This lets you stop the
2059 # target asynchronously when using GDB, usually by hitting Control+C
2060 # or pressing the STOP button. This option differs from
2061 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2062 # GDB stubs are present.
2064 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2065 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2066 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2070 # No user value, uncomment the following line to provide one.
2072 # value_source default
2073 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2074 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2076 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2077 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2080 # The following properties are affected by this value
2081 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2082 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2083 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2084 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2085 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2086 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2089 # Platform does not support CTRLC
2091 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2092 # No options implement this inferface
2093 # This value cannot be modified here.
2097 # The following properties are affected by this value
2098 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2099 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2102 # Include GDB external break support when no stubs
2103 # This option adds an interrupt handler for the GDB serial line
2104 # which will listen for GDB break packets. This lets you stop the
2105 # target asynchronously when using GDB, usually by hitting Control+C
2106 # or pressing the STOP button. This option differs from
2107 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2108 # stubs are NOT present.
2110 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2111 # This option is not active
2112 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2113 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2114 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2116 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2117 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2121 # No user value, uncomment the following line to provide one.
2123 # value_source default
2124 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2125 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2127 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2128 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2131 # The following properties are affected by this value
2132 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2133 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2134 # component CYGBLD_BUILD_REDBOOT
2135 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2138 # Include GDB multi-threading debug support
2139 # This option enables some extra HAL code which is needed
2140 # to support multi-threaded source level debugging.
2142 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2143 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2144 # CYGSEM_HAL_ROM_MONITOR == 1
2145 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2149 # No user value, uncomment the following line to provide one.
2151 # value_source default
2154 # The following properties are affected by this value
2155 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2156 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2157 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2158 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2161 # Number of times to retry sending a $O packet
2162 # This option controls the number of attempts that eCos programs
2163 # will make to send a $O packet to a host GDB process. If it is
2164 # set non-zero, then the target process will attempt to resend the
2165 # $O packet data up to this number of retries. Caution: use of
2166 # this option is not recommended as it can thoroughly confuse the
2169 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2171 # No user value, uncomment the following line to provide one.
2173 # value_source default
2177 # Timeout period for GDB packets
2178 # This option controls the time (in milliseconds) that eCos programs
2179 # will wait for a response when sending packets to a host GDB process.
2180 # If this time elapses, then the packet will be resent, up to some
2181 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2183 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2185 # No user value, uncomment the following line to provide one.
2187 # value_source default
2188 # Default value: 500
2191 # Location of CRC32 table
2192 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2193 # and placed in ROM, or generated at runtime in RAM. Depending on
2194 # your memory constraints, one of these options may be better.
2196 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2198 # No user value, uncomment the following line to provide one.
2200 # value_source default
2201 # Default value: RAM
2202 # Legal values: "ROM" "RAM"
2206 # ROM monitor support
2207 # Support for ROM monitors can be built in to your application.
2208 # It may also be relevant to build your application as a ROM monitor
2209 # itself. Such options are contained here if relevant for your chosen
2210 # platform. The options and ROM monitors available to choose are
2211 # platform-dependent.
2213 cdl_component CYGPKG_HAL_ROM_MONITOR {
2214 # There is no associated value.
2216 # The following properties are affected by this value
2220 # Target has virtual vector support
2222 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2223 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
2224 # This value cannot be modified here.
2228 # The following properties are affected by this value
2229 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2230 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2233 # Target supports baud rate control via vectors
2234 # Whether this target supports the __COMMCTL_GETBAUD
2235 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2237 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2238 # Implemented by CYGPKG_HAL_ARM_MX51, active, enabled
2239 # This value cannot be modified here.
2243 # The following properties are affected by this value
2244 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2245 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2248 # Enable use of virtual vector calling interface
2249 # Virtual vector support allows the HAL to let the ROM
2250 # monitor handle certain operations. The virtual vector table
2251 # defines a calling interface between applications running in
2252 # RAM and the ROM monitor.
2254 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2255 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2256 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2259 # Calculated value: 1
2263 # The following properties are affected by this value
2264 # component CYGBLD_BUILD_REDBOOT
2265 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2266 # package CYGPKG_DEVS_ETH_PHY
2267 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2271 # Inherit console settings from ROM monitor
2272 # When this option is set, the application will inherit
2273 # the console as set up by the ROM monitor. This means
2274 # that the application will use whatever channel and
2275 # mangling style was used by the ROM monitor when
2276 # the application was launched.
2278 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2279 # This option is not active
2280 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2281 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2285 # No user value, uncomment the following line to provide one.
2287 # value_source default
2288 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2289 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2294 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2295 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2296 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2299 # Debug channel is configurable
2300 # This option is a configuration hint - it is enabled
2301 # when the HAL initialization code will make use
2302 # of the debug channel configuration option.
2304 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2305 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2306 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2310 # The following properties are affected by this value
2311 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2312 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2315 # Console channel is configurable
2316 # This option is a configuration hint - it is enabled
2317 # when the HAL initialization code will make use
2318 # of the console channel configuration option.
2320 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2321 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2322 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2323 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2327 # The following properties are affected by this value
2328 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2329 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2332 # Initialize whole of virtual vector table
2333 # This option will cause the whole of the virtual
2334 # vector table to be initialized with dummy values on
2335 # startup. When this option is enabled, all the
2336 # options below must also be enabled - or the
2337 # table would be empty when the application
2339 # On targets where older ROM monitors without
2340 # virtual vector support may still be in use, it is
2341 # necessary for RAM applictions to initialize the
2342 # table (since all HAL diagnostics and debug IO
2343 # happens via the table).
2345 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2347 # No user value, uncomment the following line to provide one.
2349 # value_source default
2350 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2351 # CYG_HAL_STARTUP == ROMRAM
2352 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2354 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2355 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2357 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2358 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2360 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2361 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2363 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2366 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2367 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2370 # The following properties are affected by this value
2371 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2372 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2373 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2374 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2375 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2376 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2377 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2378 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2379 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2380 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2381 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2382 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2383 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2384 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2387 # Claim virtual vector table entries by default
2388 # By default most virtual vectors will be claimed by
2389 # RAM startup configurations, meaning that the RAM
2390 # application will provide the services. The
2391 # exception is COMMS support (HAL
2392 # diagnostics/debugging IO) which is left in the
2393 # control of the ROM monitor.
2394 # The reasoning behind this is to get as much of the
2395 # code exercised during regular development so it
2396 # is known to be working the few times a new ROM
2397 # monitor or a ROM production configuration is used
2398 # - COMMS are excluded only by necessity in order to
2399 # avoid breaking an existing debugger connections
2400 # (there may be ways around this).
2401 # For production RAM configurations this option can
2402 # be switched off, causing the appliction to rely on
2403 # the ROM monitor for these services, thus
2404 # saving some space.
2405 # Individual vectors may also be left unclaimed,
2406 # controlled by the below options (meaning that the
2407 # associated service provided by the ROM monitor
2410 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2411 # This option is not active
2412 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2413 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2417 # No user value, uncomment the following line to provide one.
2419 # value_source default
2422 # The following properties are affected by this value
2423 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2424 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2426 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2427 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2428 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2429 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2430 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2433 # Claim reset virtual vectors
2434 # This option will cause the reset and kill_by_reset
2435 # virtual vectors to be claimed.
2437 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2439 # No user value, uncomment the following line to provide one.
2441 # value_source default
2442 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2447 # The following properties are affected by this value
2448 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2449 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2452 # Claim version virtual vectors
2453 # This option will cause the version
2454 # virtual vectors to be claimed.
2456 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2458 # No user value, uncomment the following line to provide one.
2460 # value_source default
2461 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2462 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2466 # Claim delay_us virtual vector
2467 # This option will cause the delay_us
2468 # virtual vector to be claimed.
2470 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2472 # No user value, uncomment the following line to provide one.
2474 # value_source default
2475 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2480 # The following properties are affected by this value
2481 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2482 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2485 # Claim cache virtual vectors
2486 # This option will cause the cache virtual vectors
2489 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2491 # No user value, uncomment the following line to provide one.
2493 # value_source default
2494 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2496 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2499 # The following properties are affected by this value
2500 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2501 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2504 # Claim data virtual vectors
2505 # This option will cause the data virtual vectors
2506 # to be claimed. At present there is only one, used
2507 # by the RedBoot ethernet driver to share diag output.
2509 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2511 # No user value, uncomment the following line to provide one.
2513 # value_source default
2514 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2516 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2519 # The following properties are affected by this value
2520 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2521 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2524 # Claim comms virtual vectors
2525 # This option will cause the communication tables
2526 # that are part of the virtual vectors mechanism to
2527 # be claimed. Note that doing this may cause an
2528 # existing ROM monitor communication connection to
2529 # be closed. For this reason, the option is disabled
2530 # per default for normal application
2533 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2535 # No user value, uncomment the following line to provide one.
2537 # value_source default
2538 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2539 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2540 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2543 # The following properties are affected by this value
2544 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2545 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2546 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2547 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2548 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2549 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2550 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2551 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # Do diagnostic IO via virtual vector table
2555 # All HAL IO happens via the virtual vector table / comm
2556 # tables when those tables are supported by the HAL.
2557 # If so desired, the low-level IO functions can
2558 # still be provided by the RAM application by
2559 # enabling the CLAIM_COMMS option.
2561 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2562 # Calculated value: 1
2566 # The following properties are affected by this value
2567 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2568 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2569 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2570 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2574 # Behave as a ROM monitor
2575 # Enable this option if this program is to be used as a ROM monitor,
2576 # i.e. applications will be loaded into RAM on the TX51 module, and this
2577 # ROM monitor may process exceptions or interrupts generated from the
2578 # application. This enables features such as utilizing a separate
2579 # interrupt stack when exceptions are generated.
2581 cdl_option CYGSEM_HAL_ROM_MONITOR {
2583 # No user value, uncomment the following line to provide one.
2585 # The inferred value should not be edited directly.
2587 # value_source inferred
2589 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2590 # CYG_HAL_STARTUP == ROMRAM
2591 # CYG_HAL_STARTUP == ROMRAM
2594 # The following properties are affected by this value
2595 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2596 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2597 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2598 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2599 # option CYGPRI_REDBOOT_ROM_MONITOR
2600 # Requires: CYGSEM_HAL_ROM_MONITOR
2603 # Work with a ROM monitor
2604 # Support can be enabled for different varieties of ROM monitor.
2605 # This support changes various eCos semantics such as the encoding
2606 # of diagnostic output, or the overriding of hardware interrupt
2608 # Firstly there is "Generic" support which prevents the HAL
2609 # from overriding the hardware vectors that it does not use, to
2610 # instead allow an installed ROM monitor to handle them. This is
2611 # the most basic support which is likely to be common to most
2612 # implementations of ROM monitor.
2613 # "GDB_stubs" provides support when GDB stubs are included in
2614 # the ROM monitor or boot ROM.
2616 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2618 # No user value, uncomment the following line to provide one.
2620 # value_source default
2621 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2622 # CYG_HAL_STARTUP == ROMRAM
2624 # Legal values: "Generic" "GDB_stubs"
2625 # Requires: CYG_HAL_STARTUP == "RAM"
2626 # CYG_HAL_STARTUP == ROMRAM
2629 # The following properties are affected by this value
2630 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2631 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2632 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2633 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2634 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2635 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2636 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2637 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2641 # Platform defined I/O channels.
2642 # Platforms which provide additional I/O channels can implement
2643 # this interface, indicating that the function plf_if_init()
2644 # needs to be called.
2646 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2647 # No options implement this inferface
2648 # This value cannot be modified here.
2653 # Platform IDE I/O support.
2654 # Platforms which provide IDE controllers can implement
2655 # this interface, indicating that IDE I/O macros are
2658 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2659 # No options implement this inferface
2660 # This value cannot be modified here.
2664 # The following properties are affected by this value
2665 # component CYGSEM_REDBOOT_DISK_IDE
2666 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2669 # File I/O operations via GDB
2670 # This option enables support for various file I/O
2671 # operations using the GDB remote protocol to communicate
2672 # with GDB. The operations are then performed on the
2673 # debugging host by proxy. These operations are only
2674 # currently available by using a system call interface
2675 # to RedBoot. This may change in the future.
2677 cdl_option CYGPKG_HAL_GDB_FILEIO {
2678 # This option is not active
2679 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2680 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2684 # No user value, uncomment the following line to provide one.
2686 # value_source default
2688 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2689 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2693 # Build Compiler sanity checking tests
2694 # Enabling this option causes compiler tests to be built.
2696 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2698 # No user value, uncomment the following line to provide one.
2700 # value_source default
2703 # The following properties are affected by this value
2704 # component CYGPKG_HAL_TESTS
2705 # Calculated: "tests/context tests/basic"
2706 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2707 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2708 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2712 # This option specifies the set of tests for the common HAL.
2714 cdl_component CYGPKG_HAL_TESTS {
2715 # Calculated value: "tests/context tests/basic"
2716 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2717 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2718 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2719 # CYGINT_HAL_TESTS_NO_CACHES == 0
2720 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2721 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2723 # Current_value: tests/context tests/basic tests/cache tests/intr
2727 # Interface for cache presence
2728 # Some architectures and/or platforms do not have caches. By
2729 # implementing this interface, these can disable the various
2730 # cache-related tests.
2732 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2733 # No options implement this inferface
2734 # This value cannot be modified here.
2736 # Current value: 0 0
2738 # The following properties are affected by this value
2739 # component CYGPKG_HAL_TESTS
2740 # Calculated: "tests/context tests/basic"
2741 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2742 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2743 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2748 # The ARM architecture HAL package provides generic
2749 # support for this processor architecture. It is also
2750 # necessary to select a specific target platform HAL
2753 cdl_package CYGPKG_HAL_ARM {
2754 # Packages cannot be added or removed, nor can their version be changed,
2755 # simply by editing their value. Instead the appropriate configuration
2756 # should be used to perform these actions.
2758 # This value cannot be modified here.
2760 # Current value: 1 current
2762 # The following properties are affected by this value
2763 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2764 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2765 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2766 # ActiveIf: CYGPKG_HAL_ARM
2770 # The CPU architecture supports THUMB mode
2772 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2773 # No options implement this inferface
2774 # This value cannot be modified here.
2778 # The following properties are affected by this value
2779 # option CYGHWR_THUMB
2780 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2781 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2782 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2785 # Enable Thumb instruction set
2786 # Enable use of the Thumb instruction set.
2788 cdl_option CYGHWR_THUMB {
2789 # This option is not active
2790 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2791 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2795 # No user value, uncomment the following line to provide one.
2797 # value_source default
2800 # The following properties are affected by this value
2801 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2802 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # Enable Thumb interworking compiler option
2806 # This option controls the use of -mthumb-interwork in the
2807 # compiler flags. It defaults enabled in Thumb or ROM monitor
2808 # configurations, but can be overridden for reduced memory
2809 # footprint where interworking is not a requirement.
2811 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2812 # This option is not active
2813 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2814 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2818 # No user value, uncomment the following line to provide one.
2820 # value_source default
2821 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2823 # CYGSEM_HAL_ROM_MONITOR == 1
2827 # The platform and architecture supports Big Endian operation
2829 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2830 # No options implement this inferface
2831 # This value cannot be modified here.
2835 # The following properties are affected by this value
2836 # option CYGHWR_HAL_ARM_BIGENDIAN
2837 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2840 # Use big-endian mode
2841 # Use the CPU in big-endian mode.
2843 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2844 # This option is not active
2845 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2846 # CYGINT_HAL_ARM_BIGENDIAN == 0
2850 # No user value, uncomment the following line to provide one.
2852 # value_source default
2856 # The platform uses a processor with an ARM7 core
2858 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2859 # No options implement this inferface
2860 # This value cannot be modified here.
2864 # The following properties are affected by this value
2865 # option CYGHWR_HAL_ARM_CPU_FAMILY
2866 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2867 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2868 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2869 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2871 # option CYGHWR_HAL_ARM_CPU_FAMILY
2872 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2873 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2874 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2875 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2879 # The platform uses a processor with an ARM9 core
2881 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2882 # Implemented by CYGPKG_HAL_ARM_MX51, active, enabled
2883 # This value cannot be modified here.
2887 # The following properties are affected by this value
2888 # option CYGHWR_HAL_ARM_CPU_FAMILY
2889 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2890 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2891 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2892 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2894 # option CYGHWR_HAL_ARM_CPU_FAMILY
2895 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2896 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2897 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2898 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2902 # The platform uses a processor with a StrongARM core
2904 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2905 # No options implement this inferface
2906 # This value cannot be modified here.
2910 # The following properties are affected by this value
2911 # option CYGHWR_HAL_ARM_CPU_FAMILY
2912 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2913 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2914 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2915 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2917 # option CYGHWR_HAL_ARM_CPU_FAMILY
2918 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2919 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2920 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2921 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2925 # The platform uses a processor with a XScale core
2927 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2928 # No options implement this inferface
2929 # This value cannot be modified here.
2933 # The following properties are affected by this value
2934 # option CYGHWR_HAL_ARM_CPU_FAMILY
2935 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2936 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2937 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2938 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2940 # option CYGHWR_HAL_ARM_CPU_FAMILY
2941 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2942 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2943 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2944 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2949 # It is possible to optimize code for different
2950 # ARM CPU families. This option selects which CPU to
2951 # optimize for on boards that support multiple CPU types.
2953 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2955 # No user value, uncomment the following line to provide one.
2957 # value_source default
2958 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2959 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2960 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2961 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2963 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2964 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2965 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2966 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2968 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2969 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2970 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2971 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2973 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2974 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2975 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2976 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2979 # Provide diagnostic dump for exceptions
2980 # Print messages about hardware exceptions, including
2981 # raw exception frame dump and register contents.
2983 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2985 # No user value, uncomment the following line to provide one.
2987 # value_source default
2989 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2990 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2994 # Process all exceptions with the eCos application
2995 # Normal RAM-based programs which do not include GDB stubs
2996 # defer processing of the illegal instruction exception to GDB.
2997 # Setting this options allows the program to explicitly handle
2998 # the illegal instruction exception itself. Note: this will
2999 # prevent the use of GDB to debug the application as breakpoints
3000 # will no longer work.
3002 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3004 # No user value, uncomment the following line to provide one.
3006 # value_source default
3010 # Support GDB thread operations via ICE/Multi-ICE
3011 # Allow GDB to get thread information via the ICE/Multi-ICE
3014 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3016 # No user value, uncomment the following line to provide one.
3018 # value_source default
3020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3021 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3023 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3026 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3027 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3031 # Support for 'gprof' callbacks
3032 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3033 # to acquire the interrupt-context PC and SP, when this option is
3036 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3037 # This option is not active
3038 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3039 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3041 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3042 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3043 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3046 # Calculated value: 1
3051 # Accept exceptions and irq's occurring in user mode
3052 # For standalone Redboot based programs running in user mode.
3054 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3056 # No user value, uncomment the following line to provide one.
3058 # value_source default
3062 # Preserve svc spsr before returning to svc mode
3063 # This option secures exception and breakpoint processing
3064 # triggered during execution of application specific SWI
3067 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3069 # No user value, uncomment the following line to provide one.
3071 # value_source default
3077 cdl_option CYGBLD_LINKER_SCRIPT {
3078 # Calculated value: "src/arm.ld"
3080 # Current_value: src/arm.ld
3083 # Implementations of hal_arm_mem_real_region_top()
3085 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3086 # No options implement this inferface
3087 # This value cannot be modified here.
3092 # Freescale SoC architecture
3093 # This HAL variant package provides generic
3094 # support for the Freescale SoC. It is also
3095 # necessary to select a specific target platform HAL
3098 cdl_package CYGPKG_HAL_ARM_MX51 {
3099 # Packages cannot be added or removed, nor can their version be changed,
3100 # simply by editing their value. Instead the appropriate configuration
3101 # should be used to perform these actions.
3103 # This value cannot be modified here.
3105 # Current value: 1 current
3107 # The following properties are affected by this value
3108 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
3109 # ActiveIf: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
3110 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
3114 # MX51 Tapeout 2.0 support
3115 # When this option is enabled, it indicates support for
3118 cdl_option CYGHWR_MX51_TO2 {
3120 # No user value, uncomment the following line to provide one.
3122 # value_source default
3126 # MX51 mDDR memory support
3127 # When this option is enabled, it indicates support for
3128 # mDDR memory on MX51
3130 cdl_option CYGHWR_MX51_MDDR {
3137 # Processor clock rate
3138 # The processor can run at various frequencies.
3139 # These values are expressed in KHz. Note that there are
3140 # several steppings of the rate to run at different
3141 # maximum frequencies. Check the specs to make sure that your
3142 # particular processor can run at the rate you select here.
3144 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3145 # This option is not active
3146 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3147 # CYG_HAL_STARTUP == ROMRAM
3151 # No user value, uncomment the following line to provide one.
3153 # value_source default
3154 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3155 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3156 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3157 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3159 # Legal values: 150000 200000
3162 # Real-time clock constants
3164 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3165 # There is no associated value.
3169 # Real-time clock numerator
3171 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3172 # Calculated value: 1000000000
3174 # Current_value: 1000000000
3177 # Real-time clock denominator
3178 # This option selects the heartbeat rate for the real-time clock.
3179 # The rate is specified in ticks per second. Change this value
3180 # with caution - too high and your system will become saturated
3181 # just handling clock interrupts, too low and some operations
3182 # such as thread scheduling may become sluggish.
3184 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3186 # No user value, uncomment the following line to provide one.
3188 # value_source default
3189 # Default value: 100
3191 # The following properties are affected by this value
3192 # option CYGNUM_HAL_RTC_PERIOD
3193 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3196 # Real-time clock period
3198 cdl_option CYGNUM_HAL_RTC_PERIOD {
3199 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3200 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3202 # Current_value: 36864
3206 # UART1 available as diagnostic/debug channel
3207 # The chip has multiple serial channels which may be
3208 # used for different things on different platforms. This
3209 # interface allows a platform to indicate that the specified
3210 # serial port can be used as a diagnostic and/or debug channel.
3212 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3213 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3214 # This value cannot be modified here.
3218 # The following properties are affected by this value
3221 # UART2 available as diagnostic/debug channel
3222 # The chip has multiple serial channels which may be
3223 # used for different things on different platforms. This
3224 # interface allows a platform to indicate that the specified
3225 # serial port can be used as a diagnostic and/or debug channel.
3227 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3228 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3229 # This value cannot be modified here.
3233 # The following properties are affected by this value
3236 # UART3 available as diagnostic/debug channel
3237 # The chip has multiple serial channels which may be
3238 # used for different things on different platforms. This
3239 # interface allows a platform to indicate that the specified
3240 # serial port can be used as a diagnostic and/or debug channel.
3242 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3243 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3244 # This value cannot be modified here.
3248 # The following properties are affected by this value
3251 # UART4 available as diagnostic/debug channel
3252 # The chip has multiple serial channels which may be
3253 # used for different things on different platforms. This
3254 # interface allows a platform to indicate that the specified
3255 # serial port can be used as a diagnostic and/or debug channel.
3257 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3258 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3259 # This value cannot be modified here.
3263 # The following properties are affected by this value
3266 # UART5 available as diagnostic/debug channel
3267 # The chip has multiple serial channels which may be
3268 # used for different things on different platforms. This
3269 # interface allows a platform to indicate that the specified
3270 # serial port can be used as a diagnostic and/or debug channel.
3272 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3273 # No options implement this inferface
3274 # This value cannot be modified here.
3280 # This HAL platform package provides generic
3281 # support for the Ka-Ro electronics TX51 module.
3283 cdl_package CYGPKG_HAL_ARM_TX51KARO {
3284 # Packages cannot be added or removed, nor can their version be changed,
3285 # simply by editing their value. Instead the appropriate configuration
3286 # should be used to perform these actions.
3288 # This value cannot be modified here.
3290 # Current value: 1 current
3291 # Requires: CYGINT_ISO_CTYPE
3292 # CYGINT_ISO_CTYPE == 1
3294 # Requires: CYGBLD_BUILD_REDBOOT == 1
3295 # CYGBLD_BUILD_REDBOOT == 1
3301 # The only startup type allowed is ROMRAM, since this will allow
3302 # the program to exist in ROM, but be copied to RAM during startup
3303 # which is required to boot from NAND flash.
3305 cdl_component CYG_HAL_STARTUP {
3307 # No user value, uncomment the following line to provide one.
3309 # value_source default
3310 # Default value: ROMRAM
3311 # Legal values: "ROMRAM"
3313 # The following properties are affected by this value
3314 # option CYGSEM_HAL_ROM_MONITOR
3315 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3316 # option CYGSEM_HAL_ROM_MONITOR
3317 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3318 # option CYGSEM_HAL_USE_ROM_MONITOR
3319 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3320 # option CYGSEM_HAL_USE_ROM_MONITOR
3321 # Requires: CYG_HAL_STARTUP == "RAM"
3322 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3323 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3324 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3325 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3326 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3327 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3328 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3329 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3330 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3331 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3332 # option CYGPRI_REDBOOT_ROM_MONITOR
3333 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3334 # option CYGPRI_REDBOOT_ROM_MONITOR
3335 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3338 # Diagnostic serial port baud rate
3339 # This option selects the baud rate used for the console port.
3340 # Note: this should match the value chosen for the GDB port if the
3341 # console and GDB port are the same.
3343 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3345 # No user value, uncomment the following line to provide one.
3347 # value_source default
3348 # Default value: 115200
3349 # Legal values: 9600 19200 38400 57600 115200
3352 # GDB serial port baud rate
3353 # This option selects the baud rate used for the GDB port.
3354 # Note: this should match the value chosen for the console port if the
3355 # console and GDB port are the same.
3357 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3359 # No user value, uncomment the following line to provide one.
3361 # value_source default
3362 # Default value: 115200
3363 # Legal values: 9600 19200 38400 57600 115200
3366 # Number of communication channels on the TX51
3368 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3369 # Calculated value: 3
3373 # The following properties are affected by this value
3374 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3375 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3376 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3377 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3378 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3379 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3383 # The TX51 provides access to three serial ports. This option
3384 # chooses which port will be used to connect to a host
3387 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3388 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3389 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3393 # No user value, uncomment the following line to provide one.
3395 # value_source default
3397 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3398 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3401 # Default console channel.
3403 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3404 # Calculated value: 0
3407 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3408 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3410 # The following properties are affected by this value
3411 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3412 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3415 # Console serial port
3416 # The TX51 provides access to three serial ports. This option
3417 # chooses which port will be used for console output.
3419 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3420 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3421 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3425 # No user value, uncomment the following line to provide one.
3427 # value_source default
3428 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3429 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3431 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3432 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3435 # Ka-Ro electronics TX51 module build options
3436 # Package specific build options including control over
3437 # compiler flags used only in building this package,
3438 # and details of which tests are built.
3440 cdl_component CYGPKG_HAL_ARM_TX51_OPTIONS {
3441 # There is no associated value.
3442 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3443 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3449 # This option specifies the SDRAM size of the TX51 module.
3451 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_SIZE {
3453 # No user value, uncomment the following line to provide one.
3454 # user_value 0x08000000
3455 # value_source default
3456 # Default value: 0x08000000
3457 # Legal values: 0x10000000 0x08000000 0x04000000
3461 # This option specifies the SDRAM clock in MHz of the TX51 module.
3463 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_CLK {
3465 # No user value, uncomment the following line to provide one.
3467 # value_source default
3468 # Default value: 166
3469 # Legal values: 166 200
3473 # This option specifies the CPU clock in MHz of the TX51 module.
3475 cdl_option CYGNUM_HAL_ARM_TX51_CPU_CLK {
3477 # No user value, uncomment the following line to provide one.
3479 # value_source default
3480 # Default value: 800
3481 # Legal values: 600 800
3484 # Enable low level debugging with LED
3485 # This option enables low level debugging by blink codes
3486 # of the LED on STK5.
3488 cdl_option CYGOPT_HAL_ARM_TX51_DEBUG {
3490 # No user value, uncomment the following line to provide one.
3492 # value_source default
3493 # Default value: false
3494 # false (unknown) == 0
3498 # Additional compiler flags
3499 # This option modifies the set of compiler flags for
3500 # building the TX51 HAL. These flags are used in addition
3501 # to the set of global flags.
3503 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_ADD {
3505 # No user value, uncomment the following line to provide one.
3507 # value_source default
3511 # Suppressed compiler flags
3512 # This option modifies the set of compiler flags for
3513 # building the TX51 HAL. These flags are removed from
3514 # the set of global flags if present.
3516 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_REMOVE {
3518 # No user value, uncomment the following line to provide one.
3520 # value_source default
3524 # Show a splash screen from the FIS partition: 'logo'
3525 # When this option is enabled, RedBoot will look for a flash partition
3526 # named 'logo' and display the contents of this partition as initial
3529 cdl_option CYGHWR_MX51_LCD_LOGO {
3530 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3531 # CYGPKG_DEVS_IMX_IPU == current
3535 # No user value, uncomment the following line to provide one.
3537 # value_source default
3544 cdl_component CYGHWR_MEMORY_LAYOUT {
3545 # Calculated value: "arm_tx51_romram"
3547 # Current_value: arm_tx51_romram
3551 # Memory layout linker script fragment
3553 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3554 # Calculated value: "<pkgconf/mlt_arm_tx51_romram.ldi>"
3556 # Current_value: <pkgconf/mlt_arm_tx51_romram.ldi>
3559 # Memory layout header file
3561 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3562 # Calculated value: "<pkgconf/mlt_arm_tx51_romram.h>"
3564 # Current_value: <pkgconf/mlt_arm_tx51_romram.h>
3573 # Common types and useful macros.
3574 # Tracing and assertion facilities.
3575 # Package startup options.
3577 cdl_package CYGPKG_INFRA {
3578 # Packages cannot be added or removed, nor can their version be changed,
3579 # simply by editing their value. Instead the appropriate configuration
3580 # should be used to perform these actions.
3582 # This value cannot be modified here.
3584 # Current value: 1 current
3586 # The following properties are affected by this value
3587 # package CYGPKG_HAL
3588 # Requires: CYGPKG_INFRA
3589 # component CYGBLD_BUILD_REDBOOT
3590 # Requires: CYGPKG_INFRA
3595 # The eCos source code contains a significant amount of
3596 # internal debugging support, in the form of assertions and
3598 # Assertions check at runtime that various conditions are as
3599 # expected; if not, execution is halted.
3600 # Tracing takes the form of text messages that are output
3601 # whenever certain events occur, or whenever functions are
3603 # The most important property of these checks and messages is
3604 # that they are not required for the program to run.
3605 # It is prudent to develop software with assertions enabled,
3606 # but disable them when making a product release, thus
3607 # removing the overhead of that checking.
3608 # It is possible to enable assertions and tracing
3610 # There are also options controlling the exact behaviour of
3611 # the assertion and tracing facilities, thus giving users
3612 # finer control over the code and data size requirements.
3614 cdl_component CYGPKG_INFRA_DEBUG {
3616 # No user value, uncomment the following line to provide one.
3618 # value_source default
3621 # The following properties are affected by this value
3622 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3623 # ActiveIf: CYGPKG_INFRA_DEBUG
3628 # If this option is defined, asserts in the code are tested.
3629 # Assert functions (CYG_ASSERT()) are defined in
3630 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3631 # If it is not defined, these result in no additional
3632 # object code and no checking of the asserted conditions.
3634 cdl_component CYGDBG_USE_ASSERTS {
3635 # This option is not active
3636 # The parent CYGPKG_INFRA_DEBUG is disabled
3639 # No user value, uncomment the following line to provide one.
3641 # value_source default
3643 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3644 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3647 # The following properties are affected by this value
3648 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3649 # Requires: CYGDBG_USE_ASSERTS
3650 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3651 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3656 # This option allows individual control of preconditions.
3657 # A precondition is one type of assert, which it is
3658 # useful to control separately from more general asserts.
3659 # The function is CYG_PRECONDITION(condition,msg).
3661 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3662 # This option is not active
3663 # The parent CYGDBG_USE_ASSERTS is not active
3666 # No user value, uncomment the following line to provide one.
3668 # value_source default
3673 # This option allows individual control of postconditions.
3674 # A postcondition is one type of assert, which it is
3675 # useful to control separately from more general asserts.
3676 # The function is CYG_POSTCONDITION(condition,msg).
3678 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3679 # This option is not active
3680 # The parent CYGDBG_USE_ASSERTS is not active
3683 # No user value, uncomment the following line to provide one.
3685 # value_source default
3690 # This option allows individual control of loop invariants.
3691 # A loop invariant is one type of assert, which it is
3692 # useful to control separately from more general asserts,
3693 # particularly since a loop invariant is typically evaluated
3694 # a great many times when used correctly.
3695 # The function is CYG_LOOP_INVARIANT(condition,msg).
3697 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3698 # This option is not active
3699 # The parent CYGDBG_USE_ASSERTS is not active
3702 # No user value, uncomment the following line to provide one.
3704 # value_source default
3709 # All assertions within eCos contain a text message
3710 # which should give some information about the condition
3712 # These text messages will end up being embedded in the
3713 # application image and hence there is a significant penalty
3714 # in terms of image size.
3715 # It is possible to suppress the use of these messages by
3716 # disabling this option.
3717 # This results in smaller code size, but there is less
3718 # human-readable information if an assertion actually gets
3721 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3722 # This option is not active
3723 # The parent CYGDBG_USE_ASSERTS is not active
3726 # No user value, uncomment the following line to provide one.
3728 # value_source default
3734 # If this option is defined, tracing operations
3735 # result in output or logging, depending on other options.
3736 # This may have adverse effects on performance, if the time
3737 # taken to output message overwhelms the available CPU
3738 # power or output bandwidth.
3739 # Trace functions (CYG_TRACE()) are defined in
3740 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3741 # If it is not defined, these result in no additional
3742 # object code and no trace information.
3744 cdl_component CYGDBG_USE_TRACING {
3745 # This option is not active
3746 # The parent CYGPKG_INFRA_DEBUG is disabled
3749 # No user value, uncomment the following line to provide one.
3751 # value_source default
3753 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3754 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3757 # The following properties are affected by this value
3758 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3759 # ActiveIf: CYGDBG_USE_TRACING
3760 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3761 # ActiveIf: CYGDBG_USE_TRACING
3762 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3763 # ActiveIf: CYGDBG_USE_TRACING
3764 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3765 # ActiveIf: CYGDBG_USE_TRACING
3766 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3767 # ActiveIf: CYGDBG_USE_TRACING
3771 # Trace function reports
3772 # This option allows individual control of
3773 # function entry/exit tracing, independent of
3774 # more general tracing output.
3775 # This may be useful to remove clutter from a
3778 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3779 # This option is not active
3780 # The parent CYGDBG_USE_TRACING is not active
3781 # The parent CYGDBG_USE_TRACING is disabled
3784 # No user value, uncomment the following line to provide one.
3786 # value_source default
3791 # All trace calls within eCos contain a text message
3792 # which should give some information about the circumstances.
3793 # These text messages will end up being embedded in the
3794 # application image and hence there is a significant penalty
3795 # in terms of image size.
3796 # It is possible to suppress the use of these messages by
3797 # disabling this option.
3798 # This results in smaller code size, but there is less
3799 # human-readable information available in the trace output,
3800 # possibly only filenames and line numbers.
3802 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3803 # This option is not active
3804 # The parent CYGDBG_USE_TRACING is not active
3805 # The parent CYGDBG_USE_TRACING is disabled
3808 # No user value, uncomment the following line to provide one.
3810 # value_source default
3815 # Trace output implementations
3817 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3818 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3819 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3820 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3821 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3822 # This option is not active
3823 # The parent CYGPKG_INFRA_DEBUG is disabled
3825 # This value cannot be modified here.
3829 # The following properties are affected by this value
3830 # component CYGDBG_USE_ASSERTS
3831 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3832 # component CYGDBG_USE_TRACING
3833 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3837 # A null output module which is useful when
3838 # debugging interactively; the output routines
3839 # can be breakpointed rather than have them actually
3840 # 'print' something.
3842 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3843 # This option is not active
3844 # The parent CYGPKG_INFRA_DEBUG is disabled
3847 # No user value, uncomment the following line to provide one.
3849 # value_source default
3854 # An output module which produces simple output
3855 # from tracing and assertion events.
3857 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3858 # This option is not active
3859 # The parent CYGPKG_INFRA_DEBUG is disabled
3862 # No user value, uncomment the following line to provide one.
3864 # value_source default
3869 # An output module which produces fancy output
3870 # from tracing and assertion events.
3872 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3873 # This option is not active
3874 # The parent CYGPKG_INFRA_DEBUG is disabled
3877 # No user value, uncomment the following line to provide one.
3879 # value_source default
3884 # An output module which buffers output
3885 # from tracing and assertion events. The stored
3886 # messages are output when an assert fires, or
3887 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3889 # Of course, there will only be stored messages
3890 # if tracing per se (CYGDBG_USE_TRACING)
3893 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3894 # This option is not active
3895 # The parent CYGPKG_INFRA_DEBUG is disabled
3898 # No user value, uncomment the following line to provide one.
3900 # value_source default
3906 # The size of the trace buffer. This counts the number
3907 # of trace records stored. When the buffer fills it
3908 # either wraps, stops recording, or generates output.
3910 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3911 # This option is not active
3912 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3913 # ActiveIf constraint: CYGDBG_USE_TRACING
3914 # CYGDBG_USE_TRACING == 0
3918 # No user value, uncomment the following line to provide one.
3920 # value_source default
3922 # Legal values: 5 to 65535
3925 # Wrap trace buffer when full
3926 # When the trace buffer has filled with records it
3927 # starts again at the beginning. Hence only the last
3928 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3931 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3932 # This option is not active
3933 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3934 # ActiveIf constraint: CYGDBG_USE_TRACING
3935 # CYGDBG_USE_TRACING == 0
3939 # No user value, uncomment the following line to provide one.
3941 # value_source default
3945 # Halt trace buffer when full
3946 # When the trace buffer has filled with records it
3947 # stops recording. Hence only the first
3948 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3951 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3952 # This option is not active
3953 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3954 # ActiveIf constraint: CYGDBG_USE_TRACING
3955 # CYGDBG_USE_TRACING == 0
3959 # No user value, uncomment the following line to provide one.
3961 # value_source default
3965 # Print trace buffer when full
3966 # When the trace buffer has filled with records it
3967 # prints the contents of the buffer. The buffer is then
3968 # emptied and the system continues.
3970 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3971 # This option is not active
3972 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3973 # ActiveIf constraint: CYGDBG_USE_TRACING
3974 # CYGDBG_USE_TRACING == 0
3978 # No user value, uncomment the following line to provide one.
3980 # value_source default
3984 # Print trace buffer on assert fail
3985 # When an assertion fails the trace buffer will be
3986 # printed to the default diagnostic device.
3988 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3989 # This option is not active
3990 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3991 # ActiveIf constraint: CYGDBG_USE_TRACING
3992 # CYGDBG_USE_TRACING == 0
3996 # No user value, uncomment the following line to provide one.
3998 # value_source default
4003 # Use function names
4004 # All trace and assert calls within eCos contain a
4005 # reference to the builtin macro '__PRETTY_FUNCTION__',
4006 # which evaluates to a string containing
4007 # the name of the current function.
4008 # This is useful when reading a trace log.
4009 # It is possible to suppress the use of the function name
4010 # by disabling this option.
4011 # This results in smaller code size, but there is less
4012 # human-readable information available in the trace output,
4013 # possibly only filenames and line numbers.
4015 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4016 # This option is not active
4017 # The parent CYGPKG_INFRA_DEBUG is disabled
4020 # No user value, uncomment the following line to provide one.
4022 # value_source default
4028 # Some packages require a startup routine to be called.
4029 # This can be carried out by application code, by supplying
4030 # a routine called cyg_package_start() which calls the
4031 # appropriate package startup routine(s).
4032 # Alternatively, this routine can be constructed automatically
4033 # and configured to call the startup routines of your choice.
4035 cdl_component CYGPKG_INFRA_STARTUP {
4036 # There is no associated value.
4040 # Start uITRON subsystem
4041 # Generate a call to initialize the
4042 # uITRON compatibility subsystem
4043 # within the system version of cyg_package_start().
4044 # This enables compatibility with uITRON.
4045 # You must configure uITRON with the correct tasks before
4046 # starting the uItron subsystem.
4047 # If this is disabled, and you want to use uITRON,
4048 # you must call cyg_uitron_start() from your own
4049 # cyg_package_start() or cyg_userstart().
4051 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4052 # This option is not active
4053 # ActiveIf constraint: CYGPKG_UITRON
4054 # CYGPKG_UITRON (unknown) == 0
4058 # No user value, uncomment the following line to provide one.
4060 # value_source default
4062 # Requires: CYGPKG_UITRON
4063 # CYGPKG_UITRON (unknown) == 0
4068 # Smaller slower memcpy()
4069 # Enabling this option causes the implementation of
4070 # the standard memcpy() routine to reduce code
4071 # size at the expense of execution speed. This
4072 # option is automatically enabled with the use of
4073 # the -Os option to the compiler. Also note that
4074 # the compiler will try to use its own builtin
4075 # version of memcpy() if possible, ignoring the
4076 # implementation in this package, unless given
4077 # the -fno-builtin compiler option.
4079 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4081 # No user value, uncomment the following line to provide one.
4083 # value_source default
4087 # Smaller slower memset()
4088 # Enabling this option causes the implementation of
4089 # the standard memset() routine to reduce code
4090 # size at the expense of execution speed. This
4091 # option is automatically enabled with the use of
4092 # the -Os option to the compiler. Also note that
4093 # the compiler will try to use its own builtin
4094 # version of memset() if possible, ignoring the
4095 # implementation in this package, unless given
4096 # the -fno-builtin compiler option.
4098 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4100 # No user value, uncomment the following line to provide one.
4102 # value_source default
4106 # Provide empty C++ delete functions
4107 # To deal with virtual destructors, where the correct delete()
4108 # function must be called for the derived class in question, the
4109 # underlying delete is called when needed, from destructors. This
4110 # is regardless of whether the destructor is called by delete itself.
4111 # So there is a reference to delete() from all destructors. The
4112 # default builtin delete() attempts to call free() if there is
4113 # one defined. So, if you have destructors, and you have free(),
4114 # as in malloc() and free(), any destructor counts as a reference
4115 # to free(). So the dynamic memory allocation code is linked
4116 # in regardless of whether it gets explicitly called. This
4117 # increases code and data size needlessly.
4118 # To defeat this undesirable behaviour, we define empty versions
4119 # of delete and delete. But doing this prevents proper use
4120 # of dynamic memory in C++ programs via C++'s new and delete
4122 # Therefore, this option is provided
4123 # for explicitly disabling the provision of these empty functions,
4124 # so that new and delete can be used, if that is what is required.
4126 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4128 # No user value, uncomment the following line to provide one.
4130 # value_source default
4134 # Threshold for valid number of delete calls
4135 # Some users don't know about the empty delete function and then
4136 # wonder why their C++ classes are leaking memory. If
4137 # INFRA_DEBUG is enabled we keep a counter for the number of
4138 # times delete is called. If it goes above this threshold we throw
4139 # an assertion failure. This should point heavy users of
4140 # delete in the right direction without upsetting those who want
4141 # an empty delete function.
4143 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4144 # This option is not active
4145 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4146 # CYGPKG_INFRA_DEBUG == 0
4150 # No user value, uncomment the following line to provide one.
4152 # value_source default
4153 # Default value: 100
4156 # Provide dummy abort() function
4157 # This option controls the inclusion of a dummy abort() function.
4158 # Parts of the C and C++ compiler runtime systems contain references
4159 # to abort(), particulary in the C++ exception handling code. It is
4160 # not possible to eliminate these references, so this dummy function
4161 # in included to satisfy them. It is not expected that this function
4162 # will ever be called, so its current behaviour is to simply loop.
4164 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4166 # No user value, uncomment the following line to provide one.
4168 # value_source default
4169 # Default value: CYGINT_ISO_EXIT == 0
4170 # CYGINT_ISO_EXIT == 0
4172 # Requires: !CYGINT_ISO_EXIT
4173 # CYGINT_ISO_EXIT == 0
4177 # Reset platform at end of test case execution
4178 # If this option is set then test case programs will reset the platform
4179 # when they terminate, as opposed to the default which is to just hang
4182 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4184 # No user value, uncomment the following line to provide one.
4186 # value_source default
4190 # Provide dummy strlen() function
4191 # This option controls the inclusion of a dummy strlen() function.
4192 # Parts of the C and C++ compiler runtime systems contain references
4193 # to strlen(), particulary in the C++ exception handling code. It is
4194 # not possible to eliminate these references, so this dummy function
4195 # in included to satisfy them. While it is not expected that this function
4196 # will ever be called, it is functional but uses the simplest, smallest
4197 # algorithm. There is a faster version of strlen() in the C library.
4199 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4201 # No user value, uncomment the following line to provide one.
4203 # value_source default
4204 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4205 # CYGINT_ISO_STRING_STRFUNCS == 1
4207 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4208 # CYGINT_ISO_STRING_STRFUNCS == 1
4212 # Make all compiler warnings show as errors
4213 # Enabling this option will cause all compiler warnings to show
4214 # as errors and bring the library build to a halt. This is used
4215 # to ensure that the code base is warning free, and thus ensure
4216 # that newly introduced warnings stand out and get fixed before
4217 # they show up as weird run-time behavior.
4219 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4224 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4225 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4228 # The following properties are affected by this value
4229 # option CYGBLD_GLOBAL_CFLAGS
4230 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4233 # Make compiler and assembler communicate by pipe
4234 # Enabling this option will cause the compiler to feed the
4235 # assembly output the the assembler via a pipe instead of
4236 # via a temporary file. This normally reduces the build
4239 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4244 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4245 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4249 # Infra build options
4250 # Package specific build options including control over
4251 # compiler flags used only in building this package.
4253 cdl_component CYGPKG_INFRA_OPTIONS {
4254 # There is no associated value.
4258 # Additional compiler flags
4259 # This option modifies the set of compiler flags for
4260 # building the eCos infra package. These flags are used
4261 # in addition to the set of global flags.
4263 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4265 # No user value, uncomment the following line to provide one.
4266 # user_value "-fno-rtti -Woverloaded-virtual"
4267 # value_source default
4268 # Default value: "-fno-rtti -Woverloaded-virtual"
4271 # Suppressed compiler flags
4272 # This option modifies the set of compiler flags for
4273 # building the eCos infra package. These flags are removed from
4274 # the set of global flags if present.
4276 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4278 # No user value, uncomment the following line to provide one.
4279 # user_value -Wno-pointer-sign
4280 # value_source default
4281 # Default value: -Wno-pointer-sign
4284 # Suppressed linker flags
4285 # This option modifies the set of linker flags for
4286 # building the eCos infra package tests. These flags are removed from
4287 # the set of global flags if present.
4289 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4291 # No user value, uncomment the following line to provide one.
4292 # user_value -Wl,--gc-sections
4293 # value_source default
4294 # Default value: -Wl,--gc-sections
4297 # Additional linker flags
4298 # This option modifies the set of linker flags for
4299 # building the eCos infra package tests. These flags are added to
4300 # the set of global flags if present.
4302 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4304 # No user value, uncomment the following line to provide one.
4305 # user_value -Wl,--fatal-warnings
4306 # value_source default
4307 # Default value: -Wl,--fatal-warnings
4310 # Infra package tests
4312 cdl_component CYGPKG_INFRA_TESTS {
4313 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4315 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4319 # Number of times a test runs
4320 # This option controls the number of times tests will execute their
4321 # basic function. Not all tests will honor this setting, but those
4322 # that do will execute the test N times before terminating. A value
4323 # less than 0 indicates to run forever.
4325 cdl_option CYGNUM_TESTS_RUN_COUNT {
4327 # No user value, uncomment the following line to provide one.
4329 # value_source default
4336 # Redboot ROM monitor
4337 # doc: ref/redboot.html
4338 # This package supports the Redboot [stand-alone debug monitor]
4339 # using eCos as the underlying board support mechanism.
4341 cdl_package CYGPKG_REDBOOT {
4342 # Packages cannot be added or removed, nor can their version be changed,
4343 # simply by editing their value. Instead the appropriate configuration
4344 # should be used to perform these actions.
4346 # This value cannot be modified here.
4348 # Current value: 1 current
4349 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4350 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4353 # The following properties are affected by this value
4354 # component CYGPKG_REDBOOT_ARM_OPTIONS
4355 # ActiveIf: CYGPKG_REDBOOT
4356 # component CYGPKG_REDBOOT_HAL_OPTIONS
4357 # ActiveIf: CYGPKG_REDBOOT
4358 # component CYGPKG_REDBOOT_HAL_TX51_OPTIONS
4359 # ActiveIf: CYGPKG_REDBOOT
4360 # option CYGSEM_IO_ETH_DRIVERS_WARN
4361 # ActiveIf: CYGPKG_REDBOOT
4365 # Include support for ELF file format
4367 cdl_component CYGSEM_REDBOOT_ELF {
4369 # No user value, uncomment the following line to provide one.
4371 # value_source default
4376 # Use the virtual address in the ELF headers
4377 # The ELF headers contain both a virtual and a physical address
4378 # for where code/data should be loaded. By default the physical
4379 # address is used but sometimes it is necassary to use the
4380 # virtual address because of bugy toolchains
4382 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4384 # No user value, uncomment the following line to provide one.
4386 # value_source default
4391 # Methods of loading images using redboot
4393 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4394 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4395 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4396 # This value cannot be modified here.
4400 # The following properties are affected by this value
4401 # component CYGBLD_BUILD_REDBOOT
4402 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4405 # Build Redboot ROM ELF image
4406 # This option enables the building of the Redboot ELF image.
4407 # The image may require further relocation or symbol
4408 # stripping before being converted to a binary image.
4409 # This is handled by a rule in the target CDL.
4411 cdl_component CYGBLD_BUILD_REDBOOT {
4413 # No user value, uncomment the following line to provide one.
4415 # The inferred value should not be edited directly.
4417 # value_source inferred
4419 # Requires: CYGPKG_INFRA
4420 # CYGPKG_INFRA == current
4422 # Requires: CYGPKG_ISOINFRA
4423 # CYGPKG_ISOINFRA == current
4425 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4426 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4428 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4429 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4431 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4432 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4434 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4435 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4437 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4438 # CYGINT_ISO_STRING_MEMFUNCS == 1
4440 # Requires: CYGINT_ISO_STRING_STRFUNCS
4441 # CYGINT_ISO_STRING_STRFUNCS == 1
4443 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4444 # CYGINT_REDBOOT_LOAD_METHOD == 2
4447 # The following properties are affected by this value
4448 # package CYGPKG_HAL_ARM_TX51KARO
4449 # Requires: CYGBLD_BUILD_REDBOOT == 1
4450 # option CYGBLD_BUILD_REDBOOT_BIN
4451 # ActiveIf: CYGBLD_BUILD_REDBOOT
4455 # Include GDB support in RedBoot
4456 # RedBoot normally includes support for the GDB debugging
4457 # protocols. This option allows this to be disabled which
4458 # may yield a substantial savings in terms of code and memory
4461 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4462 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4463 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4468 # The inferred value should not be edited directly.
4472 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4473 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4475 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4476 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4480 # Threads debugging support
4481 # Enabling this option will include special code in the
4482 # GDB stubs to support debugging of threaded programs. In
4483 # the case of eCos programs, this support allows GDB to
4484 # have complete access to the eCos threads in the
4487 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4488 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4489 # CYG_HAL_STARTUP == ROMRAM
4493 # No user value, uncomment the following line to provide one.
4495 # value_source default
4497 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4498 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4502 # Customized version string
4503 # Use this option to define a customized version "string" for
4504 # RedBoot. Note: this value is only cosmetic, displayed by the
4505 # "version" command, but is useful for providing site specific
4506 # information about the RedBoot configuration.
4508 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4510 # No user value, uncomment the following line to provide one.
4512 # The inferred value should not be edited directly.
4513 inferred_value 1 "Ka-Ro 2010-01-06"
4514 # value_source inferred
4515 # Default value: 0 0
4518 # Enable command line editing
4519 # If this option is non-zero, RedBoot will remember the
4520 # last N command lines. These lines may be reused.
4521 # Enabling this history will also enable rudimentary
4522 # editting of the lines themselves.
4524 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4526 # No user value, uncomment the following line to provide one.
4528 # value_source default
4531 # The following properties are affected by this value
4532 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4533 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4534 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4535 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4538 # Enable command line editing using ANSI arrows, etc
4539 # If this option is enabled, RedBoot will accept standard ANSI key
4540 # sequences for cursor movement (along with the emacs style keys).
4542 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4543 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4544 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4548 # No user value, uncomment the following line to provide one.
4550 # value_source default
4554 # Enable history command and expansion
4555 # Enabling this option will allow RedBoot to provide a
4556 # history command to list previous commands. Also enables
4557 # history expansion via '!' character similar to bash
4560 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4562 # No user value, uncomment the following line to provide one.
4564 # value_source default
4566 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4567 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4571 # Number of unique RAM segments on platform
4572 # Change this option to be the number of memory segments which are
4573 # supported by the platform. If the value is greater than 1, then
4574 # a platform specific function must provide information about the
4575 # additional segments.
4577 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4579 # No user value, uncomment the following line to provide one.
4581 # value_source default
4585 # Include support gzip/zlib decompression
4587 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4588 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4589 # CYGPKG_COMPRESS_ZLIB == current
4593 # No user value, uncomment the following line to provide one.
4595 # value_source default
4598 # The following properties are affected by this value
4599 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4600 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4604 # Size of zlib decompression buffer
4605 # This is the size of the buffer filled with incoming data
4606 # during load before calls are made to the decompressor
4607 # function. For ethernet downloads this can be made bigger
4608 # (at the cost of memory), but for serial downloads on slow
4609 # processors it may be necessary to reduce the size to
4610 # avoid serial overruns. zlib appears to bail out if less
4611 # than five bytes are available initially so this is the
4614 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4616 # No user value, uncomment the following line to provide one.
4618 # value_source default
4620 # Legal values: 5 to 256
4623 # Support compression of Flash images
4624 # This CDL indicates whether flash images can
4625 # be decompressed from gzip/zlib format into RAM.
4627 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4628 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4629 # CYGPKG_REDBOOT_FLASH == 1
4631 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4632 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4633 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4636 # Calculated value: 1
4641 # Include GZIP uncompress command
4642 # Enable this option to include a 'gunzip' command
4643 # to uncompress GZIP compressed data.
4645 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4647 # No user value, uncomment the following line to provide one.
4649 # value_source default
4653 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4654 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4656 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4658 # No user value, uncomment the following line to provide one.
4660 # The inferred value should not be edited directly.
4662 # value_source inferred
4665 # The following properties are affected by this value
4666 # option CYGPRI_REDBOOT_ZLIB_FLASH
4667 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4671 # Include support for xyzModem downloads
4672 # doc: ref/download-command.html
4674 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4676 # No user value, uncomment the following line to provide one.
4678 # value_source default
4681 # The following properties are affected by this value
4682 # option CYGPKG_REDBOOT_CFLAGS_ADD
4683 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4686 # Additional compiler flags
4687 # This option modifies the set of compiler flags for
4688 # building the eCos infra package. These flags are used
4689 # in addition to the set of global flags.
4691 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4692 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4693 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4697 # No user value, uncomment the following line to provide one.
4698 # user_value -Wno-inline
4699 # value_source default
4700 # Default value: -Wno-inline
4703 # Allow the load-command write into Flash.
4704 # Write images direct to Flash via the load command.
4705 # We assume anything which is invalid RAM is flash, hence
4706 # the requires statement
4708 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4709 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4710 # CYGPKG_REDBOOT_FLASH == 1
4714 # No user value, uncomment the following line to provide one.
4716 # value_source default
4718 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4719 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4723 # Include MS Windows CE support
4724 # doc: ref/wince.html
4725 # This option enables MS Windows CE EShell support
4726 # and Windows CE .BIN images support
4728 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4735 # Include support for MXC USB downloads
4737 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4739 # No user value, uncomment the following line to provide one.
4741 # value_source default
4745 # Include support for i.MX USB OTG downloads
4747 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4749 # No user value, uncomment the following line to provide one.
4751 # value_source default
4755 # Include POSIX checksum command
4756 # doc: ref/cksum-command.html
4758 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4760 # No user value, uncomment the following line to provide one.
4762 # value_source default
4766 # Include memory fill command
4767 # doc: ref/mfill-command.html
4769 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4771 # No user value, uncomment the following line to provide one.
4773 # value_source default
4777 # Include memory compare command
4778 # doc: ref/mcmp-command.html
4780 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4782 # No user value, uncomment the following line to provide one.
4784 # value_source default
4788 # Include memory copy command
4789 # doc: ref/mcopy-command.html
4791 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4793 # No user value, uncomment the following line to provide one.
4795 # value_source default
4799 # Include memory dump command
4800 # doc: ref/dump-command.html
4802 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4804 # No user value, uncomment the following line to provide one.
4806 # value_source default
4810 # Include cache command
4811 # doc: ref/cache-command.html
4813 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4815 # No user value, uncomment the following line to provide one.
4817 # value_source default
4821 # Include exec command
4822 # doc: ref/exec-command.html
4824 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4826 # No user value, uncomment the following line to provide one.
4828 # value_source default
4831 # The following properties are affected by this value
4832 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4833 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4836 # Include I/O Memory commands 'iopeek' and 'iopoke'
4838 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4840 # No user value, uncomment the following line to provide one.
4842 # value_source default
4846 # Granularity of timer/ticks
4847 # This option controls the granularity of the timers.
4848 # Faster CPUs can afford higher granularity (lower values)
4849 # which should give higher network performance since the stack
4852 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4854 # No user value, uncomment the following line to provide one.
4856 # value_source default
4857 # Default value: 250
4858 # Legal values: 10 25 50 100 250 500 1000
4861 # Redboot Networking
4862 # This option includes networking support in RedBoot.
4864 cdl_component CYGPKG_REDBOOT_NETWORKING {
4865 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4866 # CYGPKG_IO_ETH_DRIVERS == current
4870 # No user value, uncomment the following line to provide one.
4872 # value_source default
4875 # The following properties are affected by this value
4876 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4877 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4881 # Print net debug information
4882 # This option is overriden by the configuration stored
4885 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4887 # No user value, uncomment the following line to provide one.
4889 # value_source default
4893 # Support TFTP for download
4894 # This option enables the use of the TFTP protocol for
4897 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4899 # No user value, uncomment the following line to provide one.
4901 # value_source default
4905 # Support HTTP for download
4906 # This option enables the use of the HTTP protocol for
4909 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4916 # Default IP address
4917 # This IP address is the default used by RedBoot if
4918 # a BOOTP/DHCP server does not respond. The numbers
4919 # should be separated by *commas*, and not dots. If
4920 # an IP address is configured into the Flash
4921 # configuration, that will be used in preference.
4923 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4925 # No user value, uncomment the following line to provide one.
4927 # value_source default
4928 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4929 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4934 # Do not try to use BOOTP
4935 # By default Redboot tries to use BOOTP to get an IP
4936 # address. If there's no BOOTP server on your network
4937 # use this option to avoid to wait until the
4938 # timeout. This option is overriden by the
4939 # configuration stored in flash.
4941 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4942 # This option is not active
4943 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4946 # No user value, uncomment the following line to provide one.
4948 # value_source default
4952 # Default bootp server
4953 # This IP address is the default server
4954 # address used by RedBoot if a BOOTP/DHCP
4955 # server does not respond. The numbers should
4956 # be separated by *commas*, and not dots. If
4957 # an IP address is configured into the Flash
4958 # configuration, that will be used in
4961 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4962 # This option is not active
4963 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4966 # No user value, uncomment the following line to provide one.
4968 # value_source default
4969 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4970 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4975 # Use DHCP to get IP information
4976 # Use DHCP protocol to obtain pertinent IP addresses, such
4977 # as the client, server, gateway, etc.
4979 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4981 # No user value, uncomment the following line to provide one.
4983 # value_source default
4986 # The following properties are affected by this value
4987 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4988 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4991 # Use a gateway for non-local IP traffic
4992 # Enabling this option will allow the RedBoot networking
4993 # stack to use a [single] gateway to reach a non-local
4994 # IP address. If disabled, RedBoot will only be able to
4995 # reach nodes on the same subnet.
4997 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4999 # No user value, uncomment the following line to provide one.
5001 # value_source default
5003 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5004 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
5009 # Default gateway IP address
5010 # This IP address is the default used by RedBoot
5011 # if a BOOTP/DHCP server does not respond. The
5012 # numbers should be separated by *commas*, and
5013 # not dots. If an IP address is configured into
5014 # the Flash configuration, that will be used in
5017 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5019 # No user value, uncomment the following line to provide one.
5021 # value_source default
5022 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5023 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5027 # Default IP address mask
5028 # This IP address mask is the default used by
5029 # RedBoot if a BOOTP/DHCP server does not
5030 # respond. The numbers should be separated by
5031 # *commas*, and not dots. If an IP address is
5032 # configured into the Flash configuration, that
5033 # will be used in preference.
5035 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5037 # No user value, uncomment the following line to provide one.
5039 # value_source default
5040 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5041 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5046 # TCP port to listen for incoming connections
5047 # RedBoot will 'listen' on this port for incoming TCP
5048 # connections. This allows outside connections to be made
5049 # to the platform, either for GDB or RedBoot commands.
5051 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5053 # No user value, uncomment the following line to provide one.
5055 # value_source default
5056 # Default value: 9000
5059 # Number of [network] packet buffers
5060 # RedBoot may need to buffer network data to support
5061 # various connections. This option allows control
5062 # over the number of such buffered packets, and in
5063 # turn, controls the amount of memory used by RedBoot
5064 # (which is not available to user applications).
5065 # Each packet buffer takes up about 1514 bytes.
5066 # Note: there is little need to make this larger than
5069 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5071 # No user value, uncomment the following line to provide one.
5073 # value_source default
5075 # Legal values: 3 to 8
5079 # When this option is enabled, RedBoot will be built with
5080 # support for DNS, allowing use of hostnames on the command
5083 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5084 # This option is not active
5085 # ActiveIf constraint: CYGPKG_NS_DNS
5086 # CYGPKG_NS_DNS (unknown) == 0
5090 # No user value, uncomment the following line to provide one.
5092 # value_source default
5094 # Requires: !CYGPKG_NS_DNS_BUILD
5095 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5101 # This option sets the IP of the default DNS. The IP can be
5102 # changed at runtime as well.
5104 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5105 # This option is not active
5106 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5107 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5108 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5112 # No user value, uncomment the following line to provide one.
5113 # user_value 0.0.0.0
5114 # value_source default
5115 # Default value: 0.0.0.0
5118 # Timeout in DNS lookup
5119 # This option sets the timeout used when looking up an
5120 # address via the DNS. Default is 10 seconds.
5122 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5123 # This option is not active
5124 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5127 # No user value, uncomment the following line to provide one.
5129 # value_source default
5133 # Support the use of a domain name
5134 # This option controls if Redboot supports domain
5135 # names when performing DNS lookups
5137 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5138 # This option is not active
5139 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5142 # No user value, uncomment the following line to provide one.
5144 # value_source default
5149 # Default DNS domain
5150 # This option sets the default DNS domain name.
5151 # This value will be overwritten by the value in
5152 # flash or a domain returned by DHCP
5154 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5155 # This option is not active
5156 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5157 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5160 # No user value, uncomment the following line to provide one.
5162 # value_source default
5163 # Default value: 0 0
5166 # Get DNS domain from Flash
5167 # This option enables getting the domain name
5168 # from the flash configuration. This can later be
5169 # overwritten by a value learnt from DHCP
5171 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5172 # This option is not active
5173 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5174 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5175 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5176 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5180 # No user value, uncomment the following line to provide one.
5182 # value_source default
5186 # Use DNS domain from DHCP
5187 # This option enables the use of the domain name
5190 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5191 # This option is not active
5192 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5193 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5196 # No user value, uncomment the following line to provide one.
5198 # value_source default
5202 # BOOTP/DHCP DNS domain buffer size
5203 # This options sets the size of the static
5204 # buffer used by BOOTP/DHCP to store the DNS
5205 # domain name. The domain name will not be
5206 # set if the buffer is too small to hold it.
5208 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5209 # This option is not active
5210 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5211 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5214 # No user value, uncomment the following line to provide one.
5216 # value_source default
5222 # Default network device driver
5223 # This is the name of the default network device to use.
5225 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5226 # This option is not active
5227 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5228 # CYGHWR_NET_DRIVERS == 1
5232 # No user value, uncomment the following line to provide one.
5234 # value_source default
5235 # Default value: "\"\""
5238 # Initialize only one net device
5239 # This option tells RedBoot to stop initializing network
5240 # devices when it finds the first device which is
5241 # successfully initialized. The default behavior causes
5242 # all network devices to be initialized.
5244 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5245 # This option is not active
5246 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5247 # CYGHWR_NET_DRIVERS == 1
5251 # No user value, uncomment the following line to provide one.
5253 # value_source default
5258 # Let RedBoot use any I/O channel for its console.
5259 # If this option is enabled then RedBoot will attempt to use all
5260 # defined serial I/O channels for its console device. Once input
5261 # arrives at one of these channels then the console will use only
5264 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5266 # No user value, uncomment the following line to provide one.
5268 # The inferred value should not be edited directly.
5270 # value_source inferred
5274 # Let RedBoot adjust the baud rate of the serial console.
5275 # If this option is enabled then RedBoot will support commands
5276 # to set and query the baud rate on the selected console.
5278 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5279 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5280 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5284 # No user value, uncomment the following line to provide one.
5286 # value_source default
5290 # Run a platform specific startup function.
5291 # If this option is enabled then RedBoot will execute a platform
5292 # specific startup function before entering into its command line
5293 # processing. This allows the platform to perform any special
5294 # setups before RedBoot actually starts running. Note: the entire
5295 # RedBoot environment will already be initialized at this point.
5297 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5299 # No user value, uncomment the following line to provide one.
5301 # value_source default
5305 # Run a platform specific ESA validation function.
5306 # If this option is enabled then RedBoot will execute a platform
5307 # specific function to validate an ethernet ESA. This would be
5308 # useful if the address must conform to standards set by the
5309 # hardware manufacturer, etc.
5311 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5313 # No user value, uncomment the following line to provide one.
5315 # The inferred value should not be edited directly.
5317 # value_source inferred
5320 # The following properties are affected by this value
5321 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5322 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5323 # option CYGDAT_DEVS_ETH_ARM_TX51KARO_OUI
5324 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5327 # Maximum command line length
5328 # This option allows control over how long the CLI command line
5329 # should be. This space will be allocated statically
5330 # rather than from RedBoot's stack.
5332 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5334 # No user value, uncomment the following line to provide one.
5336 # The inferred value should not be edited directly.
5338 # value_source inferred
5339 # Default value: 256
5342 # Command processing idle timeout (ms)
5343 # This option controls the timeout period before the
5344 # command processing is considered 'idle'. Making this
5345 # number smaller will cause idle processing to take place
5346 # more often, etc. The default value of 10ms is a reasonable
5347 # tradeoff between responsiveness and overhead.
5349 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5351 # No user value, uncomment the following line to provide one.
5353 # value_source default
5357 # Validate RAM addresses during load
5358 # This option controls whether or not RedBoot will make
5359 # sure that memory being used by the "load" command is
5360 # in fact in user RAM. Leaving the option enabled makes
5361 # for a safer environment, but this check may not be valid
5362 # on all platforms, thus the ability to disable it.
5363 # ** Disable this only with great care **
5365 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5367 # No user value, uncomment the following line to provide one.
5369 # value_source default
5372 # The following properties are affected by this value
5373 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5374 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5377 # Allow RedBoot to support FLASH programming
5378 # If this option is enabled then RedBoot will provide commands
5379 # to manage images in FLASH memory. These images can be loaded
5380 # into memory for execution or executed in place.
5382 cdl_component CYGPKG_REDBOOT_FLASH {
5383 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5384 # CYGHWR_IO_FLASH_DEVICE == 1
5388 # No user value, uncomment the following line to provide one.
5390 # value_source default
5393 # The following properties are affected by this value
5394 # option CYGPRI_REDBOOT_ZLIB_FLASH
5395 # ActiveIf: CYGPKG_REDBOOT_FLASH
5396 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5397 # ActiveIf: CYGPKG_REDBOOT_FLASH
5401 # Byte order used to store info in flash.
5402 # This option controls the byte ordering used to store
5403 # the FIS directory info and flash config info.
5405 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5407 # No user value, uncomment the following line to provide one.
5408 # user_value NATURAL
5409 # value_source default
5410 # Default value: NATURAL
5411 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5414 # RedBoot Flash Image System support
5415 # doc: ref/flash-image-system.html
5416 # This option enables the Flash Image System commands
5417 # and support within RedBoot. If disabled, simple Flash
5418 # access commands such as "fis write" will still exist.
5419 # This option would be disabled for targets that need simple
5420 # FLASH manipulation, but do not have the need or space for
5421 # complete image management.
5423 cdl_option CYGOPT_REDBOOT_FIS {
5425 # No user value, uncomment the following line to provide one.
5427 # value_source default
5430 # The following properties are affected by this value
5431 # component CYGPKG_REDBOOT_FIS_CONTENTS
5432 # ActiveIf: CYGOPT_REDBOOT_FIS
5433 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5434 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5435 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5436 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5439 # Max number of chunks of free space to manage
5440 # If this option is defined then "fis free" will
5441 # rely on the FIS directory to determine what space is
5442 # free within the FLASH. This option controls the
5443 # maximum number of free segment which can be handled
5444 # (typically this number is small). If this option is
5445 # not enabled, the the archaic behaviour of actually
5446 # scanning the FLASH for erased sectors (unreliable)
5447 # will be used to determine what's free and what's
5450 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5452 # No user value, uncomment the following line to provide one.
5454 # value_source default
5455 # Default value: 1 32
5458 # Flash Image System default directory contents
5460 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5461 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5462 # CYGOPT_REDBOOT_FIS == 1
5465 # Calculated value: 1
5471 # Flash block containing the Directory
5472 # Which block of flash should hold the directory
5473 # information. Positive numbers are absolute block
5474 # numbers. Negative block numbers count backwards
5475 # from the last block. eg 2 means block 2, -2
5476 # means the last but one block.
5478 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5480 # No user value, uncomment the following line to provide one.
5482 # value_source default
5485 # The following properties are affected by this value
5486 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5487 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5488 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5491 # Redundant Flash Image System Directory Support
5492 # This option enables the use of a redundant FIS
5493 # directory within RedBoot. If enabled a flash block
5494 # will be reserved for a second copy of the fis
5495 # directory. Doing this allow for power failure safe
5496 # updates of the directory by the application.
5498 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5500 # No user value, uncomment the following line to provide one.
5502 # value_source default
5504 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5505 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5510 # Flash block containing the backup Directory
5511 # Which block of flash should hold the redundant
5512 # directory information. Positive numbers are
5513 # absolute block numbers. Negative block numbers
5514 # count backwards from the last block. eg 2 means
5515 # block 2, -2 means the last but one block.
5517 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5518 # This option is not active
5519 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5522 # No user value, uncomment the following line to provide one.
5524 # value_source default
5526 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5527 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5528 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5529 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5532 # The following properties are affected by this value
5533 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5534 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5535 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5539 # Pseudo-file to describe reserved area
5540 # If an area of FLASH is reserved, it is informative to
5541 # have a fis entry describing it. This option controls
5542 # creation of such an entry by default in the fis init
5545 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5546 # This option is not active
5547 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5548 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5552 # No user value, uncomment the following line to provide one.
5554 # value_source default
5558 # File to describe RedBoot boot image
5559 # Normally a ROM-startup RedBoot image is first in the
5560 # FLASH, and the system boots using that image. This
5561 # option controls creation of an entry describing it in
5562 # the fis init command. It might be disabled if a
5563 # platform has an immutable boot image of its own, where
5564 # we use a POST-startup RedBoot instead, which performs
5565 # less board initialization.
5567 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5569 # No user value, uncomment the following line to provide one.
5571 # value_source default
5574 # The following properties are affected by this value
5575 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5576 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5577 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5578 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5581 # File to describe RedBoot POST-compatible image
5582 # This option controls creation of an entry describing a
5583 # POST-startup RedBoot image in the fis init command.
5584 # Not all platforms support POST-startup. A platform
5585 # might have both for testing purposes, where the
5586 # eventual user would substitute their own POST code for
5587 # the initial ROM-startup RedBoot, and then jump to the
5588 # POST-compatible RedBoot immediately following.
5590 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5592 # No user value, uncomment the following line to provide one.
5594 # value_source default
5595 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5596 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5601 # Offset of POST image from FLASH start
5602 # This option specifies the offset for a POST image from
5603 # the start of FLASH. If unset, then the fis entry
5604 # describing the POST image will be placed where
5607 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5608 # This option is not active
5609 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5612 # No user value, uncomment the following line to provide one.
5614 # value_source default
5615 # Default value: 0 0
5616 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5617 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5618 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5621 # The following properties are affected by this value
5622 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5623 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5627 # File to describe RedBoot backup image
5628 # This option controls creation of an entry describing a
5629 # backup RedBoot image in the fis init command.
5630 # Conventionally a RAM-startup RedBoot image is kept
5631 # under this name for use in updating the ROM-based
5632 # RedBoot that boots the board.
5634 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5636 # No user value, uncomment the following line to provide one.
5638 # value_source default
5642 # Include ARM SIB ID in FIS
5643 # If set, this option will cause the last 5 words of
5644 # the FIS to include the special ID needed for the
5645 # flash to be recognized as a reserved area for RedBoot
5646 # by an ARM BootRom monitor.
5648 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5650 # No user value, uncomment the following line to provide one.
5652 # value_source default
5656 # Size of FIS directory entry
5657 # The FIS directory is limited to one single flash
5658 # sector. If your flash has tiny sectors, you may wish
5659 # to reduce this value in order to get more slots in
5660 # the FIS directory.
5662 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5664 # No user value, uncomment the following line to provide one.
5666 # value_source default
5667 # Default value: 256
5670 # Number of FIS directory entries
5671 # The FIS directory normally occupies a single flash
5672 # sector. Adjusting this value can allow for more than
5673 # one flash sector to be used, which is useful if your
5674 # sectors are very small.
5676 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5678 # No user value, uncomment the following line to provide one.
5680 # value_source default
5684 # Maximum RedBoot image size
5685 # This option controls the maximum length reserved
5686 # for the RedBoot boot image in the FIS table.
5687 # This should be a multiple of the flash's erase
5690 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5692 # No user value, uncomment the following line to provide one.
5693 # user_value 0x00020000
5694 # The inferred value should not be edited directly.
5695 inferred_value 0x00040000
5696 # value_source inferred
5697 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5698 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5702 # Offset from start of FLASH to RedBoot boot image
5703 # This option controls where the RedBoot boot image is
5704 # located relative to the start of FLASH.
5706 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5708 # No user value, uncomment the following line to provide one.
5710 # value_source default
5711 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5712 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5714 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5715 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5716 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5719 # The following properties are affected by this value
5720 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5721 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5722 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5723 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5724 # component CYGPKG_HAL_ARM_TX51_OPTIONS
5725 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5728 # Size of reserved area at start of FLASH
5729 # This option reserves an area at the start of
5730 # FLASH where RedBoot will never interfere; it is
5731 # expected that this area contains
5732 # (non-RedBoot-based) POST code or some other boot
5733 # monitor that executes before RedBoot.
5735 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5737 # No user value, uncomment the following line to provide one.
5739 # value_source default
5742 # The following properties are affected by this value
5743 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5744 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5745 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5746 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5747 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5748 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5752 # Keep all RedBoot FLASH data blocks locked.
5753 # When this option is enabled, RedBoot will keep configuration
5754 # data and the FIS directory blocks implicitly locked. While
5755 # this is somewhat safer, it does add overhead during updates.
5757 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5758 # This option is not active
5759 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5760 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5764 # No user value, uncomment the following line to provide one.
5766 # value_source default
5770 # Use CRC checksums on FIS images.
5771 # When this option is enabled, RedBoot will use CRC checksums
5772 # when reading and writing flash images.
5774 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5776 # No user value, uncomment the following line to provide one.
5778 # The inferred value should not be edited directly.
5780 # value_source inferred
5784 # ARM FLASH drivers support SIB flash block structure
5785 # This interface is implemented by a flash driver
5786 # to indicate that it supports the ARM SIB flash
5789 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5790 # No options implement this inferface
5791 # ActiveIf constraint: CYGPKG_HAL_ARM
5792 # CYGPKG_HAL_ARM == current
5795 # This value cannot be modified here.
5799 # The following properties are affected by this value
5800 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5801 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5804 # Use ARM SIB flash block structure
5805 # This option is used to interpret ARM Flash System
5806 # information blocks.
5808 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5809 # This option is not active
5810 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5811 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5815 # No user value, uncomment the following line to provide one.
5817 # value_source default
5822 # Keep RedBoot configuration data in FLASH
5823 # When this option is enabled, RedBoot will keep configuration
5824 # data in a separate block of FLASH memory. This data will
5825 # include such items as the node IP address or startup scripts.
5827 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5829 # No user value, uncomment the following line to provide one.
5831 # value_source default
5832 # Default value: CYGPKG_IO_FLASH != 0
5833 # CYGPKG_IO_FLASH == current
5836 # The following properties are affected by this value
5837 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5838 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5839 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5840 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5841 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5842 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5843 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5844 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5845 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5846 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5847 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5848 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5849 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5850 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5854 # Length of configuration data in FLASH
5855 # This option is used to control the amount of memory and FLASH
5856 # to be used for configuration options (persistent storage).
5858 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5860 # No user value, uncomment the following line to provide one.
5862 # value_source default
5863 # Default value: 4096
5866 # Style of media used for persistent data storage
5867 # Persistent data storage can either be held in 'norma' FLASH
5868 # or some other device (represented by the 'EEPROM' choice).
5869 # The different styles utilize different access methods.
5871 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5873 # No user value, uncomment the following line to provide one.
5875 # value_source default
5876 # Default value: FLASH
5877 # Legal values: "FLASH" "EEPROM"
5879 # The following properties are affected by this value
5880 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5881 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5882 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5883 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5886 # Merged config data and FIS directory
5887 # If this option is set, then the FIS directory and FLASH
5888 # configuration database will be stored in the same physical
5891 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5892 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5893 # CYGOPT_REDBOOT_FIS == 1
5894 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5898 # No user value, uncomment the following line to provide one.
5900 # value_source default
5903 # The following properties are affected by this value
5904 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5905 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5908 # Which block of flash to use
5909 # Which block of flash should hold the configuration
5910 # information. Positive numbers are absolute block numbers.
5911 # Negative block numbers count backwards from the last block.
5912 # eg 2 means block 2, -2 means the last but one block.
5914 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5916 # No user value, uncomment the following line to provide one.
5918 # value_source default
5922 # Support simple macros/aliases in FLASH
5923 # This option is used to allow support for simple text-based
5924 # macros (aliases). These aliases are kept in the FLASH
5925 # configuration data (persistent storage).
5927 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5929 # No user value, uncomment the following line to provide one.
5931 # value_source default
5935 # Length of strings in FLASH configuration data
5936 # This option is used to control the amount of memory
5937 # and FLASH to be used for string configuration
5938 # options (persistent storage).
5940 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5942 # No user value, uncomment the following line to provide one.
5944 # value_source default
5945 # Default value: 128
5948 # Length of configuration script(s) in FLASH
5949 # This option is used to control the amount of memory and
5950 # FLASH to be used for configuration options (persistent
5953 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5955 # No user value, uncomment the following line to provide one.
5957 # The inferred value should not be edited directly.
5959 # value_source inferred
5960 # Default value: 512
5963 # Fallback to read-only FLASH configuration
5964 # This option will cause the configuration information to
5965 # revert to the readonly information stored in the FLASH.
5966 # The option only takes effect after
5967 # 1) the config_ok flag has been set to be true,
5968 # indicating that at one time the copy in RAM was valid;
5970 # 2) the information in RAM has been verified to be invalid
5972 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5974 # No user value, uncomment the following line to provide one.
5976 # value_source default
5977 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5978 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5983 # Allow RedBoot to support fileio
5984 # If this option is enabled then RedBoot will provide commands
5985 # to load files from fileio file systems such as JFFS2.
5987 cdl_component CYGPKG_REDBOOT_FILEIO {
5988 # This option is not active
5989 # ActiveIf constraint: CYGPKG_IO_FILEIO
5990 # CYGPKG_IO_FILEIO (unknown) == 0
5994 # No user value, uncomment the following line to provide one.
5996 # value_source default
5999 # The following properties are affected by this value
6000 # option CYGNUM_REDBOOT_GETC_BUFFER
6001 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6005 # Include an ls command
6006 # If this option is enabled a simple ls command will be
6007 # included in redboot so the contents of a directory
6010 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
6011 # This option is not active
6012 # The parent CYGPKG_REDBOOT_FILEIO is not active
6015 # No user value, uncomment the following line to provide one.
6017 # value_source default
6022 # Allow RedBoot to support disks
6023 # If this option is enabled then RedBoot will provide commands
6024 # to load disk files.
6026 cdl_component CYGPKG_REDBOOT_DISK {
6034 # Include Redboot commands for disk access
6036 cdl_option CYGSEM_REDBOOT_DISK {
6037 # This option is not active
6038 # The parent CYGPKG_REDBOOT_DISK is disabled
6041 # No user value, uncomment the following line to provide one.
6043 # value_source default
6044 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6045 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6049 # Hardware drivers for disk-type devices
6051 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6052 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6053 # This option is not active
6054 # The parent CYGPKG_REDBOOT_DISK is disabled
6056 # This value cannot be modified here.
6060 # The following properties are affected by this value
6061 # option CYGSEM_REDBOOT_DISK
6062 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6065 # Maximum number of supported disks
6066 # This option controls the number of disks supported by
6069 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6070 # This option is not active
6071 # The parent CYGPKG_REDBOOT_DISK is disabled
6074 # No user value, uncomment the following line to provide one.
6076 # value_source default
6080 # Maximum number of partitions per disk
6081 # This option controls the maximum number of supported
6082 # partitions per disk.
6084 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6085 # This option is not active
6086 # The parent CYGPKG_REDBOOT_DISK is disabled
6089 # No user value, uncomment the following line to provide one.
6091 # value_source default
6095 # Support IDE disks.
6096 # When this option is enabled, RedBoot will support IDE disks.
6098 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6099 # This option is not active
6100 # The parent CYGPKG_REDBOOT_DISK is disabled
6101 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6102 # CYGINT_HAL_PLF_IF_IDE == 0
6106 # No user value, uncomment the following line to provide one.
6108 # value_source default
6113 # Work with VMware virtual disks
6114 # This option controls the disk driver behavior at
6117 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6118 # This option is not active
6119 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6122 # No user value, uncomment the following line to provide one.
6124 # value_source default
6129 # Support Linux second extended filesystems.
6130 # When this option is enabled, RedBoot will support EXT2
6133 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6134 # This option is not active
6135 # The parent CYGPKG_REDBOOT_DISK is disabled
6138 # No user value, uncomment the following line to provide one.
6140 # value_source default
6144 # Support ISO9660 filesystems.
6145 # When this option is enabled, RedBoot will support ISO9660
6148 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6149 # This option is not active
6150 # The parent CYGPKG_REDBOOT_DISK is disabled
6152 # Calculated value: 0
6159 # doc: ref/persistent-state-flash.html
6160 # This contains options related to RedBoot's boot script
6163 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6164 # There is no associated value.
6168 # Boot scripting enabled
6169 # This option controls whether RedBoot boot script
6170 # functionality is enabled.
6172 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6173 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6174 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6175 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6178 # Calculated value: 1
6183 # Use default RedBoot boot script
6184 # If enabled, this option will tell RedBoot to use the
6185 # value of this option as a default boot script.
6187 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6189 # No user value, uncomment the following line to provide one.
6191 # The inferred value should not be edited directly.
6193 # value_source inferred
6194 # Default value: 0 0
6196 # The following properties are affected by this value
6197 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6198 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6201 # Resolution (in ms) for script timeout value.
6202 # This option controls the resolution of the script
6203 # timeout. The value is specified in milliseconds
6204 # (ms), thus to have the script timeout be defined in
6205 # terms of tenths of seconds, use 100.
6207 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6209 # No user value, uncomment the following line to provide one.
6211 # The inferred value should not be edited directly.
6213 # value_source inferred
6214 # Default value: 1000
6217 # Script default timeout value
6218 # This option is used to set the default timeout for startup
6219 # scripts, when they are enabled.
6221 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6223 # No user value, uncomment the following line to provide one.
6225 # The inferred value should not be edited directly.
6227 # value_source inferred
6232 # Support RTC for time & date functions
6233 # When this option is enabled, RedBoot will support commands to
6234 # query and set the real time clock (time and date)
6236 cdl_option CYGSEM_REDBOOT_RTC {
6237 # This option is not active
6238 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6239 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6243 # No user value, uncomment the following line to provide one.
6245 # value_source default
6249 # Behave like a ROM monitor
6250 # Enabling this option will allow RedBoot to provide ROM
6251 # monitor-style services to programs which it executes.
6253 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6254 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6255 # CYG_HAL_STARTUP == ROMRAM
6256 # CYG_HAL_STARTUP == ROMRAM
6259 # Calculated value: 1
6262 # Requires: CYGSEM_HAL_ROM_MONITOR
6263 # CYGSEM_HAL_ROM_MONITOR == 1
6267 # Allow RedBoot to handle GNUPro application 'syscalls'.
6268 # If this option is enabled then RedBoot will install a
6269 # syscall handler to support debugging of applications
6270 # based on GNUPro newlib/bsp.
6272 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6274 # No user value, uncomment the following line to provide one.
6276 # value_source default
6279 # The following properties are affected by this value
6280 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6281 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6282 # option CYGPKG_HAL_GDB_FILEIO
6283 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6287 # Support additional syscalls for 'gprof' profiling
6288 # Support additional syscalls to support a periodic callback
6289 # function for histogram-style profiling, and an enquire/set
6291 # The application must use the GNUPro newlib facilities
6294 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6295 # This option is not active
6296 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6297 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6298 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6302 # No user value, uncomment the following line to provide one.
6304 # value_source default
6308 # Does the HAL support 'gprof' profiling?
6310 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6311 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6312 # This option is not active
6313 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6315 # This value cannot be modified here.
6319 # The following properties are affected by this value
6320 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6321 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6324 # Do not raise SIGTRAP when program exits
6325 # For some (single shot) newlib based programs,
6326 # exiting and returning a termination status may be
6327 # the normal expected behavior.
6329 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6330 # This option is not active
6331 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6334 # No user value, uncomment the following line to provide one.
6336 # value_source default
6341 # Use a common buffer for Zlib and FIS
6342 # Use a common memory buffer for both the zlib workspace
6343 # and FIS directory operations. This can save a substantial
6344 # amount of RAM, especially when flash sectors are large.
6346 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6347 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6348 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6349 # CYGOPT_REDBOOT_FIS == 1
6353 # No user value, uncomment the following line to provide one.
6355 # value_source default
6360 # Size of Zlib/FIS common buffer
6361 # Size of common buffer to allocate. Must be at least the
6362 # size of one flash sector.
6364 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6365 # This option is not active
6366 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6369 # No user value, uncomment the following line to provide one.
6370 # user_value 0x0000C000
6371 # value_source default
6372 # Default value: 0x0000C000
6373 # Legal values: 0x4000 to 0x80000000
6377 # Buffer size in getc when loading images
6378 # When loading images a buffer is used between redboot and the
6379 # underlying storage medium, eg a filesystem, or a socket etc.
6380 # The size of this buffer can have a big impart on load speed.
6382 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6384 # No user value, uncomment the following line to provide one.
6386 # value_source default
6387 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6388 # CYGPKG_REDBOOT_FILEIO == 0
6393 # Redboot for ARM options
6394 # This option lists the target's requirements for a valid Redboot
6397 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6398 # ActiveIf constraint: CYGPKG_REDBOOT
6399 # CYGPKG_REDBOOT == current
6402 # There is no associated value.
6404 # The following properties are affected by this value
6408 # Provide the exec command in RedBoot
6409 # This option contains requirements for booting linux
6410 # from RedBoot. The component is enabled/disabled from
6413 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6414 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6415 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6418 # There is no associated value.
6422 # Enable -x switch for exec command.
6423 # This option allows bi-endian platforms to launch kernels
6424 # built for an endianess different than the RedBoot endianess
6426 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6428 # No user value, uncomment the following line to provide one.
6430 # value_source default
6434 # Physical base address of linux kernel
6435 # This is the physical address of the base of the
6436 # Linux kernel image.
6438 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6440 # No user value, uncomment the following line to provide one.
6441 # user_value 0x90108000
6442 # value_source default
6443 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6444 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6448 # Default physical base address of linux kernel
6449 # This is the physical address of the base of the
6450 # Linux kernel image. This option gets set by the
6453 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6455 # No user value, uncomment the following line to provide one.
6456 # user_value 0x00008000
6457 # The inferred value should not be edited directly.
6458 inferred_value 0x90108000
6459 # value_source inferred
6460 # Default value: 0x00008000
6462 # The following properties are affected by this value
6463 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6464 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6465 # component CYGPKG_REDBOOT_HAL_TX51_OPTIONS
6466 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6469 # Base address of linux kernel parameter tags
6470 # This is the base address of the area of memory used to
6471 # pass parameters to the Linux kernel. This should be chosen
6472 # to avoid overlap with the kernel and any ramdisk image.
6474 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6476 # No user value, uncomment the following line to provide one.
6477 # user_value 0x00000100
6478 # value_source default
6479 # Default value: 0x00000100
6484 # Redboot HAL options
6485 # This option lists the target's requirements for a valid Redboot
6488 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6489 # ActiveIf constraint: CYGPKG_REDBOOT
6490 # CYGPKG_REDBOOT == current
6493 # There is no associated value.
6497 # Build Redboot ROM binary image
6498 # This option enables the conversion of the Redboot ELF
6499 # image to a binary image suitable for ROM programming.
6501 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6502 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6503 # CYGBLD_BUILD_REDBOOT == 1
6507 # No user value, uncomment the following line to provide one.
6509 # value_source default
6514 # Redboot HAL variant options
6516 cdl_component CYGPKG_REDBOOT_HAL_TX51_OPTIONS {
6517 # ActiveIf constraint: CYGPKG_REDBOOT
6518 # CYGPKG_REDBOOT == current
6521 # There is no associated value.
6522 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6523 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6528 # ISO C and POSIX infrastructure
6529 # eCos supports implementations of ISO C libraries and POSIX
6530 # implementations. This package provides infrastructure used by
6531 # all such implementations.
6533 cdl_package CYGPKG_ISOINFRA {
6534 # Packages cannot be added or removed, nor can their version be changed,
6535 # simply by editing their value. Instead the appropriate configuration
6536 # should be used to perform these actions.
6538 # This value cannot be modified here.
6540 # Current value: 1 current
6542 # The following properties are affected by this value
6543 # component CYGBLD_BUILD_REDBOOT
6544 # Requires: CYGPKG_ISOINFRA
6545 # package CYGPKG_LIBC_STRING
6546 # Requires: CYGPKG_ISOINFRA
6547 # package CYGPKG_COMPRESS_ZLIB
6548 # Requires: CYGPKG_ISOINFRA
6549 # package CYGPKG_IO_FLASH
6550 # Requires: CYGPKG_ISOINFRA
6551 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6552 # Requires: CYGPKG_ISOINFRA
6553 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6554 # DefaultValue: 0 != CYGPKG_ISOINFRA
6555 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6556 # ActiveIf: CYGPKG_ISOINFRA
6557 # package CYGPKG_LIBC_I18N
6558 # Requires: CYGPKG_ISOINFRA
6559 # package CYGPKG_LIBC_STDLIB
6560 # Requires: CYGPKG_ISOINFRA
6564 # Startup and termination
6566 cdl_component CYGPKG_ISO_STARTUP {
6567 # There is no associated value.
6571 # main() startup implementations
6572 # Implementations of this interface arrange for a user-supplied
6573 # main() to be called in an ISO compatible environment.
6575 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6576 # No options implement this inferface
6577 # This value cannot be modified here.
6580 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6581 # CYGINT_ISO_MAIN_STARTUP == 0
6584 # The following properties are affected by this value
6585 # interface CYGINT_ISO_MAIN_STARTUP
6586 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6589 # environ implementations
6590 # Implementations of this interface provide the environ
6591 # variable required by POSIX.
6593 cdl_interface CYGINT_ISO_ENVIRON {
6594 # No options implement this inferface
6595 # This value cannot be modified here.
6598 # Requires: 1 >= CYGINT_ISO_ENVIRON
6599 # CYGINT_ISO_ENVIRON == 0
6602 # The following properties are affected by this value
6603 # interface CYGINT_ISO_ENVIRON
6604 # Requires: 1 >= CYGINT_ISO_ENVIRON
6610 cdl_component CYGPKG_ISO_CTYPE_H {
6611 # There is no associated value.
6615 # Number of implementations of ctype functions
6617 cdl_interface CYGINT_ISO_CTYPE {
6618 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6619 # This value cannot be modified here.
6622 # Requires: 1 >= CYGINT_ISO_CTYPE
6623 # CYGINT_ISO_CTYPE == 1
6626 # The following properties are affected by this value
6627 # interface CYGINT_ISO_CTYPE
6628 # Requires: 1 >= CYGINT_ISO_CTYPE
6629 # package CYGPKG_HAL_ARM_TX51KARO
6630 # Requires: CYGINT_ISO_CTYPE
6631 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6632 # Requires: CYGINT_ISO_CTYPE
6633 # package CYGPKG_LIBC_STDLIB
6634 # Requires: CYGINT_ISO_CTYPE
6637 # Ctype implementation header
6639 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6641 # No user value, uncomment the following line to provide one.
6643 # The inferred value should not be edited directly.
6644 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6645 # value_source inferred
6646 # Default value: 0 0
6648 # The following properties are affected by this value
6649 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6650 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6651 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6652 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6658 cdl_component CYGPKG_ISO_ERRNO {
6659 # There is no associated value.
6663 # Number of implementations of error codes
6665 cdl_interface CYGINT_ISO_ERRNO_CODES {
6666 # Implemented by CYGPKG_ERROR, active, enabled
6667 # This value cannot be modified here.
6670 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6671 # CYGINT_ISO_ERRNO_CODES == 1
6674 # The following properties are affected by this value
6675 # interface CYGINT_ISO_ERRNO_CODES
6676 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6679 # Error codes implementation header
6681 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6683 # No user value, uncomment the following line to provide one.
6685 # The inferred value should not be edited directly.
6686 inferred_value 1 <cyg/error/codes.h>
6687 # value_source inferred
6688 # Default value: 0 0
6690 # The following properties are affected by this value
6691 # package CYGPKG_ERROR
6692 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6695 # Number of implementations of errno variable
6697 cdl_interface CYGINT_ISO_ERRNO {
6698 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6699 # This value cannot be modified here.
6702 # Requires: 1 >= CYGINT_ISO_ERRNO
6703 # CYGINT_ISO_ERRNO == 1
6706 # The following properties are affected by this value
6707 # interface CYGINT_ISO_ERRNO
6708 # Requires: 1 >= CYGINT_ISO_ERRNO
6711 # errno variable implementation header
6713 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6715 # No user value, uncomment the following line to provide one.
6717 # The inferred value should not be edited directly.
6718 inferred_value 1 <cyg/error/errno.h>
6719 # value_source inferred
6720 # Default value: 0 0
6722 # The following properties are affected by this value
6723 # component CYGPKG_ERROR_ERRNO
6724 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6728 # Locale-related functions
6730 cdl_component CYGPKG_ISO_LOCALE {
6731 # There is no associated value.
6735 # Number of implementations of locale functions
6737 cdl_interface CYGINT_ISO_LOCALE {
6738 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6739 # This value cannot be modified here.
6742 # Requires: 1 >= CYGINT_ISO_LOCALE
6743 # CYGINT_ISO_LOCALE == 1
6746 # The following properties are affected by this value
6747 # interface CYGINT_ISO_LOCALE
6748 # Requires: 1 >= CYGINT_ISO_LOCALE
6751 # Locale implementation header
6753 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6755 # No user value, uncomment the following line to provide one.
6757 # value_source default
6758 # Default value: 0 0
6762 # Standard I/O-related functionality
6764 cdl_component CYGPKG_ISO_STDIO {
6765 # There is no associated value.
6769 # Number of implementations of stdio file types
6771 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6772 # No options implement this inferface
6773 # This value cannot be modified here.
6775 # Current value: 0 0
6776 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6777 # CYGINT_ISO_STDIO_FILETYPES == 0
6780 # The following properties are affected by this value
6781 # interface CYGINT_ISO_STDIO_FILETYPES
6782 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6785 # Stdio file types implementation header
6787 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6789 # No user value, uncomment the following line to provide one.
6791 # value_source default
6792 # Default value: 0 0
6795 # Stdio standard streams implementations
6797 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6798 # No options implement this inferface
6799 # This value cannot be modified here.
6801 # Current value: 0 0
6802 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6803 # CYGINT_ISO_STDIO_STREAMS == 0
6806 # The following properties are affected by this value
6807 # interface CYGINT_ISO_STDIO_STREAMS
6808 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6811 # Stdio standard streams implementation header
6812 # This header file must define stdin, stdout
6815 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6817 # No user value, uncomment the following line to provide one.
6819 # value_source default
6820 # Default value: 0 0
6823 # Number of implementations of stdio file operations
6825 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6826 # No options implement this inferface
6827 # This value cannot be modified here.
6829 # Current value: 0 0
6830 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6831 # CYGINT_ISO_STDIO_FILEOPS == 0
6834 # The following properties are affected by this value
6835 # interface CYGINT_ISO_STDIO_FILEOPS
6836 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6839 # Stdio file operations implementation header
6840 # This header controls the file system operations on a file
6841 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6844 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6846 # No user value, uncomment the following line to provide one.
6848 # value_source default
6849 # Default value: 0 0
6852 # Number of implementations of stdio file access functionals
6854 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6855 # No options implement this inferface
6856 # This value cannot be modified here.
6858 # Current value: 0 0
6859 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6860 # CYGINT_ISO_STDIO_FILEACCESS == 0
6863 # The following properties are affected by this value
6864 # interface CYGINT_ISO_STDIO_FILEACCESS
6865 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6866 # option CYGFUN_COMPRESS_ZLIB_GZIO
6867 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6870 # Stdio file access implementation header
6871 # This header controls the file access operations
6872 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6873 # setvbuf(), and associated constants.
6875 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6877 # No user value, uncomment the following line to provide one.
6879 # value_source default
6880 # Default value: 0 0
6883 # Number of implementations of stdio formatted I/O
6885 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6886 # No options implement this inferface
6887 # This value cannot be modified here.
6889 # Current value: 0 0
6890 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6891 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6894 # The following properties are affected by this value
6895 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6896 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6897 # option CYGFUN_COMPRESS_ZLIB_GZIO
6898 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6901 # Stdio formatted I/O implementation header
6903 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6905 # No user value, uncomment the following line to provide one.
6907 # value_source default
6908 # Default value: 0 0
6911 # Number of implementations of stdio character I/O
6913 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6914 # No options implement this inferface
6915 # This value cannot be modified here.
6917 # Current value: 0 0
6918 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6919 # CYGINT_ISO_STDIO_CHAR_IO == 0
6922 # The following properties are affected by this value
6923 # interface CYGINT_ISO_STDIO_CHAR_IO
6924 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6927 # Stdio character I/O implementation header
6929 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6931 # No user value, uncomment the following line to provide one.
6933 # value_source default
6934 # Default value: 0 0
6937 # Number of implementations of stdio direct I/O
6939 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6940 # No options implement this inferface
6941 # This value cannot be modified here.
6943 # Current value: 0 0
6944 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6945 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6948 # The following properties are affected by this value
6949 # interface CYGINT_ISO_STDIO_DIRECT_IO
6950 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6953 # Stdio direct I/O implementation header
6955 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6957 # No user value, uncomment the following line to provide one.
6959 # value_source default
6960 # Default value: 0 0
6963 # Number of implementations of stdio file positioning
6965 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6966 # No options implement this inferface
6967 # This value cannot be modified here.
6969 # Current value: 0 0
6970 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6971 # CYGINT_ISO_STDIO_FILEPOS == 0
6974 # The following properties are affected by this value
6975 # interface CYGINT_ISO_STDIO_FILEPOS
6976 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6977 # option CYGFUN_COMPRESS_ZLIB_GZIO
6978 # Requires: CYGINT_ISO_STDIO_FILEPOS
6981 # Stdio file positioning implementation header
6983 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6985 # No user value, uncomment the following line to provide one.
6987 # value_source default
6988 # Default value: 0 0
6991 # Number of implementations of stdio error handling
6993 cdl_interface CYGINT_ISO_STDIO_ERROR {
6994 # No options implement this inferface
6995 # This value cannot be modified here.
6997 # Current value: 0 0
6998 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6999 # CYGINT_ISO_STDIO_ERROR == 0
7002 # The following properties are affected by this value
7003 # interface CYGINT_ISO_STDIO_ERROR
7004 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7007 # Stdio error handling implementation header
7009 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
7011 # No user value, uncomment the following line to provide one.
7013 # value_source default
7014 # Default value: 0 0
7017 # POSIX fd-related function implementations
7019 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7020 # No options implement this inferface
7021 # This value cannot be modified here.
7023 # Current value: 0 0
7024 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7025 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7028 # The following properties are affected by this value
7029 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7030 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7033 # POSIX fd-related function implementation header
7035 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7037 # No user value, uncomment the following line to provide one.
7039 # value_source default
7040 # Default value: 0 0
7044 # Standard general utility functions
7046 cdl_component CYGPKG_ISO_STDLIB {
7047 # There is no associated value.
7051 # String conversion function implementations
7053 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7054 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7055 # This value cannot be modified here.
7058 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7059 # CYGINT_ISO_STDLIB_STRCONV == 1
7062 # The following properties are affected by this value
7063 # interface CYGINT_ISO_STDLIB_STRCONV
7064 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7067 # String conversion function implementation header
7069 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7071 # No user value, uncomment the following line to provide one.
7073 # The inferred value should not be edited directly.
7074 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7075 # value_source inferred
7076 # Default value: 0 0
7078 # The following properties are affected by this value
7079 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7080 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7083 # String to FP conversion function implementations
7085 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7086 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7087 # This value cannot be modified here.
7090 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7091 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7094 # The following properties are affected by this value
7095 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7096 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7099 # String to FP conversion function implementation header
7101 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7103 # No user value, uncomment the following line to provide one.
7105 # value_source default
7106 # Default value: 0 0
7109 # Random number generator implementations
7111 cdl_interface CYGINT_ISO_RAND {
7112 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7113 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7114 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7115 # This value cannot be modified here.
7118 # Requires: 1 >= CYGINT_ISO_RAND
7119 # CYGINT_ISO_RAND == 1
7122 # The following properties are affected by this value
7123 # interface CYGINT_ISO_RAND
7124 # Requires: 1 >= CYGINT_ISO_RAND
7127 # Random number generator implementation header
7129 cdl_option CYGBLD_ISO_RAND_HEADER {
7131 # No user value, uncomment the following line to provide one.
7133 # value_source default
7134 # Default value: 0 0
7137 # Malloc implementations
7139 cdl_interface CYGINT_ISO_MALLOC {
7140 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7141 # This value cannot be modified here.
7144 # Requires: 1 >= CYGINT_ISO_MALLOC
7145 # CYGINT_ISO_MALLOC == 1
7148 # The following properties are affected by this value
7149 # interface CYGINT_ISO_MALLOC
7150 # Requires: 1 >= CYGINT_ISO_MALLOC
7151 # option CYGFUN_LIBC_STRING_STRDUP
7152 # ActiveIf: CYGINT_ISO_MALLOC
7155 # Malloc implementation header
7157 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7159 # No user value, uncomment the following line to provide one.
7161 # value_source default
7162 # Default value: 0 0
7165 # Mallinfo() implementations
7167 cdl_interface CYGINT_ISO_MALLINFO {
7168 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7169 # This value cannot be modified here.
7172 # Requires: 1 >= CYGINT_ISO_MALLINFO
7173 # CYGINT_ISO_MALLINFO == 1
7176 # The following properties are affected by this value
7177 # interface CYGINT_ISO_MALLINFO
7178 # Requires: 1 >= CYGINT_ISO_MALLINFO
7181 # Mallinfo() implementation header
7183 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7185 # No user value, uncomment the following line to provide one.
7187 # value_source default
7188 # Default value: 0 0
7191 # Program exit functionality implementations
7193 cdl_interface CYGINT_ISO_EXIT {
7194 # No options implement this inferface
7195 # This value cannot be modified here.
7198 # Requires: 1 >= CYGINT_ISO_EXIT
7199 # CYGINT_ISO_EXIT == 0
7202 # The following properties are affected by this value
7203 # interface CYGINT_ISO_EXIT
7204 # Requires: 1 >= CYGINT_ISO_EXIT
7205 # option CYGFUN_INFRA_DUMMY_ABORT
7206 # Requires: !CYGINT_ISO_EXIT
7207 # option CYGFUN_INFRA_DUMMY_ABORT
7208 # DefaultValue: CYGINT_ISO_EXIT == 0
7211 # Program exit functionality implementation header
7213 cdl_option CYGBLD_ISO_EXIT_HEADER {
7215 # No user value, uncomment the following line to provide one.
7217 # value_source default
7218 # Default value: 0 0
7221 # Program environment implementations
7223 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7224 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7225 # This value cannot be modified here.
7228 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7229 # CYGINT_ISO_STDLIB_ENVIRON == 1
7232 # The following properties are affected by this value
7233 # interface CYGINT_ISO_STDLIB_ENVIRON
7234 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7237 # Program environment implementation header
7239 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7241 # No user value, uncomment the following line to provide one.
7243 # value_source default
7244 # Default value: 0 0
7247 # system() implementations
7249 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7250 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7251 # This value cannot be modified here.
7254 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7255 # CYGINT_ISO_STDLIB_SYSTEM == 1
7258 # The following properties are affected by this value
7259 # interface CYGINT_ISO_STDLIB_SYSTEM
7260 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7263 # system() implementation header
7265 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7267 # No user value, uncomment the following line to provide one.
7269 # value_source default
7270 # Default value: 0 0
7273 # bsearch() implementations
7275 cdl_interface CYGINT_ISO_BSEARCH {
7276 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7277 # This value cannot be modified here.
7280 # Requires: 1 >= CYGINT_ISO_BSEARCH
7281 # CYGINT_ISO_BSEARCH == 1
7284 # The following properties are affected by this value
7285 # interface CYGINT_ISO_BSEARCH
7286 # Requires: 1 >= CYGINT_ISO_BSEARCH
7289 # bsearch() implementation header
7291 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7293 # No user value, uncomment the following line to provide one.
7295 # value_source default
7296 # Default value: 0 0
7299 # qsort() implementations
7301 cdl_interface CYGINT_ISO_QSORT {
7302 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7303 # This value cannot be modified here.
7306 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7307 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7310 # The following properties are affected by this value
7313 # qsort() implementation header
7315 cdl_option CYGBLD_ISO_QSORT_HEADER {
7317 # No user value, uncomment the following line to provide one.
7319 # value_source default
7320 # Default value: 0 0
7323 # abs()/labs() implementations
7325 cdl_interface CYGINT_ISO_ABS {
7326 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7327 # This value cannot be modified here.
7330 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7331 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7334 # The following properties are affected by this value
7337 # abs()/labs() implementation header
7339 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7341 # No user value, uncomment the following line to provide one.
7343 # The inferred value should not be edited directly.
7344 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7345 # value_source inferred
7346 # Default value: 0 0
7348 # The following properties are affected by this value
7349 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7350 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7353 # div()/ldiv() implementations
7355 cdl_interface CYGINT_ISO_DIV {
7356 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7357 # This value cannot be modified here.
7360 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7361 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7364 # The following properties are affected by this value
7367 # div()/ldiv() implementation header
7369 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7371 # No user value, uncomment the following line to provide one.
7373 # The inferred value should not be edited directly.
7374 inferred_value 1 <cyg/libc/stdlib/div.inl>
7375 # value_source inferred
7376 # Default value: 0 0
7378 # The following properties are affected by this value
7379 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7380 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7383 # Header defining the implementation's MB_CUR_MAX
7385 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7387 # No user value, uncomment the following line to provide one.
7389 # value_source default
7390 # Default value: 0 0
7392 # The following properties are affected by this value
7393 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7394 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7397 # Multibyte character implementations
7399 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7400 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7401 # This value cannot be modified here.
7404 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7405 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7408 # The following properties are affected by this value
7409 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7410 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7413 # Multibyte character implementation header
7415 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7417 # No user value, uncomment the following line to provide one.
7419 # value_source default
7420 # Default value: 0 0
7426 cdl_component CYGPKG_ISO_STRING {
7427 # There is no associated value.
7431 # Number of implementations of strerror() function
7433 cdl_interface CYGINT_ISO_STRERROR {
7434 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7435 # This value cannot be modified here.
7437 # Current value: 1 1
7438 # Requires: 1 >= CYGINT_ISO_STRERROR
7439 # CYGINT_ISO_STRERROR == 1
7442 # The following properties are affected by this value
7443 # interface CYGINT_ISO_STRERROR
7444 # Requires: 1 >= CYGINT_ISO_STRERROR
7447 # strerror() implementation header
7449 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7451 # No user value, uncomment the following line to provide one.
7453 # The inferred value should not be edited directly.
7454 inferred_value 1 <cyg/error/strerror.h>
7455 # value_source inferred
7456 # Default value: 0 0
7458 # The following properties are affected by this value
7459 # option CYGPKG_ERROR_STRERROR
7460 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7463 # memcpy() implementation header
7465 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7467 # No user value, uncomment the following line to provide one.
7469 # value_source default
7470 # Default value: 0 0
7473 # memset() implementation header
7475 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7477 # No user value, uncomment the following line to provide one.
7479 # value_source default
7480 # Default value: 0 0
7483 # Number of implementations of strtok_r() function
7485 cdl_interface CYGINT_ISO_STRTOK_R {
7486 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7487 # This value cannot be modified here.
7489 # Current value: 1 1
7490 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7491 # CYGINT_ISO_STRTOK_R == 1
7494 # The following properties are affected by this value
7495 # interface CYGINT_ISO_STRTOK_R
7496 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7499 # strtok_r() implementation header
7501 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7503 # No user value, uncomment the following line to provide one.
7505 # The inferred value should not be edited directly.
7506 inferred_value 1 <cyg/libc/string/string.h>
7507 # value_source inferred
7508 # Default value: 0 0
7510 # The following properties are affected by this value
7511 # package CYGPKG_LIBC_STRING
7512 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7515 # Number of implementations of locale-specific string functions
7516 # This covers locale-dependent string functions such as strcoll()
7519 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7520 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7521 # This value cannot be modified here.
7523 # Current value: 1 1
7524 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7525 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7528 # The following properties are affected by this value
7529 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7530 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7533 # Locale-specific string functions' implementation header
7534 # This covers locale-dependent string functions such as strcoll()
7537 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7539 # No user value, uncomment the following line to provide one.
7541 # The inferred value should not be edited directly.
7542 inferred_value 1 <cyg/libc/string/string.h>
7543 # value_source inferred
7544 # Default value: 0 0
7546 # The following properties are affected by this value
7547 # package CYGPKG_LIBC_STRING
7548 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7551 # Number of implementations of BSD string functions
7553 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7554 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7555 # This value cannot be modified here.
7557 # Current value: 0 0
7558 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7559 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7562 # The following properties are affected by this value
7563 # interface CYGINT_ISO_STRING_BSD_FUNCS
7564 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7567 # BSD string functions' implementation header
7569 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7571 # No user value, uncomment the following line to provide one.
7573 # The inferred value should not be edited directly.
7574 inferred_value 1 <cyg/libc/string/bsdstring.h>
7575 # value_source inferred
7576 # Default value: 0 0
7578 # The following properties are affected by this value
7579 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7580 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7583 # Number of implementations of other mem*() functions
7585 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7586 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7587 # This value cannot be modified here.
7589 # Current value: 1 1
7590 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7591 # CYGINT_ISO_STRING_MEMFUNCS == 1
7594 # The following properties are affected by this value
7595 # interface CYGINT_ISO_STRING_MEMFUNCS
7596 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7597 # component CYGBLD_BUILD_REDBOOT
7598 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7599 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7600 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7603 # Other mem*() functions' implementation header
7605 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7607 # No user value, uncomment the following line to provide one.
7609 # The inferred value should not be edited directly.
7610 inferred_value 1 <cyg/libc/string/string.h>
7611 # value_source inferred
7612 # Default value: 0 0
7614 # The following properties are affected by this value
7615 # package CYGPKG_LIBC_STRING
7616 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7619 # Number of implementations of other ISO C str*() functions
7620 # This covers the other str*() functions defined by ISO C.
7622 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7623 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7624 # This value cannot be modified here.
7626 # Current value: 1 1
7627 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7628 # CYGINT_ISO_STRING_STRFUNCS == 1
7631 # The following properties are affected by this value
7632 # interface CYGINT_ISO_STRING_STRFUNCS
7633 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7634 # option CYGFUN_INFRA_DUMMY_STRLEN
7635 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7636 # option CYGFUN_INFRA_DUMMY_STRLEN
7637 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7638 # component CYGBLD_BUILD_REDBOOT
7639 # Requires: CYGINT_ISO_STRING_STRFUNCS
7640 # component CYGPKG_IO_ETH_DRIVERS_NET
7641 # Requires: CYGINT_ISO_STRING_STRFUNCS
7642 # option CYGFUN_COMPRESS_ZLIB_GZIO
7643 # Requires: CYGINT_ISO_STRING_STRFUNCS
7644 # package CYGPKG_IO_FLASH
7645 # Requires: CYGINT_ISO_STRING_STRFUNCS
7646 # package CYGPKG_LIBC_STDLIB
7647 # Requires: CYGINT_ISO_STRING_STRFUNCS
7650 # Other ISO C str*() functions' implementation header
7651 # This covers the other str*() functions defined by ISO C.
7653 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7655 # No user value, uncomment the following line to provide one.
7657 # The inferred value should not be edited directly.
7658 inferred_value 1 <cyg/libc/string/string.h>
7659 # value_source inferred
7660 # Default value: 0 0
7662 # The following properties are affected by this value
7663 # package CYGPKG_LIBC_STRING
7664 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7668 # Clock and time functionality
7670 cdl_component CYGPKG_ISO_TIME {
7671 # There is no associated value.
7675 # time_t implementation header
7677 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7679 # No user value, uncomment the following line to provide one.
7681 # value_source default
7682 # Default value: 0 0
7685 # clock_t implementation header
7687 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7689 # No user value, uncomment the following line to provide one.
7691 # value_source default
7692 # Default value: 0 0
7695 # struct timeval implementation header
7697 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7699 # No user value, uncomment the following line to provide one.
7701 # value_source default
7702 # Default value: 0 0
7705 # fnmatch implementation header
7707 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7709 # No user value, uncomment the following line to provide one.
7711 # value_source default
7712 # Default value: 0 0
7715 # Number of implementations of POSIX timer types
7717 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7718 # No options implement this inferface
7719 # This value cannot be modified here.
7721 # Current value: 0 0
7722 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7723 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7726 # The following properties are affected by this value
7727 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7728 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7731 # POSIX timer types implementation header
7733 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7735 # No user value, uncomment the following line to provide one.
7737 # value_source default
7738 # Default value: 0 0
7741 # Number of implementations of POSIX clock types
7743 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7744 # No options implement this inferface
7745 # This value cannot be modified here.
7747 # Current value: 0 0
7748 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7749 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7752 # The following properties are affected by this value
7753 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7754 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7757 # POSIX clock types implementation header
7759 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7761 # No user value, uncomment the following line to provide one.
7763 # value_source default
7764 # Default value: 0 0
7767 # Number of implementations of ISO C types
7769 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7770 # No options implement this inferface
7771 # This value cannot be modified here.
7773 # Current value: 0 0
7774 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7775 # CYGINT_ISO_C_TIME_TYPES == 0
7778 # The following properties are affected by this value
7779 # interface CYGINT_ISO_C_TIME_TYPES
7780 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7783 # ISO C time types implementation header
7785 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7787 # No user value, uncomment the following line to provide one.
7789 # value_source default
7790 # Default value: 0 0
7793 # Number of implementations of POSIX timers
7795 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7796 # No options implement this inferface
7797 # This value cannot be modified here.
7799 # Current value: 0 0
7800 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7801 # CYGINT_ISO_POSIX_TIMERS == 0
7804 # The following properties are affected by this value
7805 # interface CYGINT_ISO_POSIX_TIMERS
7806 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7809 # POSIX timer implementation header
7811 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7813 # No user value, uncomment the following line to provide one.
7815 # value_source default
7816 # Default value: 0 0
7819 # Number of implementations of POSIX clocks
7821 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7822 # No options implement this inferface
7823 # This value cannot be modified here.
7825 # Current value: 0 0
7826 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7827 # CYGINT_ISO_POSIX_CLOCKS == 0
7830 # The following properties are affected by this value
7831 # interface CYGINT_ISO_POSIX_CLOCKS
7832 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7835 # POSIX clocks implementation header
7837 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7839 # No user value, uncomment the following line to provide one.
7841 # value_source default
7842 # Default value: 0 0
7845 # Number of implementations of ISO C clock functions
7847 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7848 # No options implement this inferface
7849 # This value cannot be modified here.
7851 # Current value: 0 0
7852 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7853 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7856 # The following properties are affected by this value
7857 # interface CYGINT_ISO_C_CLOCK_FUNCS
7858 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7861 # ISO C clock functions' implementation header
7863 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7865 # No user value, uncomment the following line to provide one.
7867 # value_source default
7868 # Default value: 0 0
7871 # Number of implementations of tzset() function
7873 cdl_interface CYGINT_ISO_TZSET {
7874 # No options implement this inferface
7875 # This value cannot be modified here.
7877 # Current value: 0 0
7878 # Requires: 1 >= CYGINT_ISO_TZSET
7879 # CYGINT_ISO_TZSET == 0
7882 # The following properties are affected by this value
7883 # interface CYGINT_ISO_TZSET
7884 # Requires: 1 >= CYGINT_ISO_TZSET
7887 # tzset() implementation header
7889 cdl_option CYGBLD_ISO_TZSET_HEADER {
7891 # No user value, uncomment the following line to provide one.
7893 # value_source default
7894 # Default value: 0 0
7898 # Signal functionality
7900 cdl_component CYGPKG_ISO_SIGNAL {
7901 # There is no associated value.
7905 # Number of implementations of signal numbers
7907 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7908 # No options implement this inferface
7909 # This value cannot be modified here.
7912 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7913 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7916 # The following properties are affected by this value
7917 # interface CYGINT_ISO_SIGNAL_NUMBERS
7918 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7921 # Signal numbering implementation header
7922 # This header provides the mapping of signal
7923 # names (e.g. SIGBUS) to numbers.
7925 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7927 # No user value, uncomment the following line to provide one.
7929 # value_source default
7930 # Default value: 0 0
7933 # Number of signal implementations
7935 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7936 # No options implement this inferface
7937 # This value cannot be modified here.
7940 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7941 # CYGINT_ISO_SIGNAL_IMPL == 0
7944 # The following properties are affected by this value
7945 # interface CYGINT_ISO_SIGNAL_IMPL
7946 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7949 # Signals implementation header
7951 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7953 # No user value, uncomment the following line to provide one.
7955 # value_source default
7956 # Default value: 0 0
7959 # POSIX real time signals feature test macro
7960 # This defines the POSIX feature test macro
7961 # that indicates that the POSIX real time signals
7964 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7965 # No options implement this inferface
7966 # This value cannot be modified here.
7969 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7970 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7973 # The following properties are affected by this value
7974 # interface CYGINT_POSIX_REALTIME_SIGNALS
7975 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7979 # Non-local jumps functionality
7981 cdl_component CYGPKG_ISO_SETJMP {
7982 # There is no associated value.
7986 # setjmp() / longjmp() implementations
7988 cdl_interface CYGINT_ISO_SETJMP {
7989 # No options implement this inferface
7990 # This value cannot be modified here.
7993 # Requires: 1 >= CYGINT_ISO_SETJMP
7994 # CYGINT_ISO_SETJMP == 0
7997 # The following properties are affected by this value
7998 # interface CYGINT_ISO_SETJMP
7999 # Requires: 1 >= CYGINT_ISO_SETJMP
8002 # setjmp() / longjmp() implementation header
8004 cdl_option CYGBLD_ISO_SETJMP_HEADER {
8006 # No user value, uncomment the following line to provide one.
8008 # value_source default
8009 # Default value: 0 0
8012 # sigsetjmp() / siglongjmp() implementations
8014 cdl_interface CYGINT_ISO_SIGSETJMP {
8015 # No options implement this inferface
8016 # This value cannot be modified here.
8019 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8020 # CYGINT_ISO_SIGSETJMP == 0
8023 # The following properties are affected by this value
8024 # interface CYGINT_ISO_SIGSETJMP
8025 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8028 # sigsetjmp() / siglongjmp() implementation header
8030 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8032 # No user value, uncomment the following line to provide one.
8034 # value_source default
8035 # Default value: 0 0
8039 # Assertions implementation header
8041 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8043 # No user value, uncomment the following line to provide one.
8045 # value_source default
8046 # Default value: 0 0
8049 # POSIX file control
8050 # This covers the POSIX file control definitions,
8051 # normally found in <fcntl.h>
8053 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8054 # There is no associated value.
8058 # POSIX open flags implementation header
8060 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8062 # No user value, uncomment the following line to provide one.
8064 # value_source default
8065 # Default value: 0 0
8068 # POSIX fcntl() implementations
8070 cdl_interface CYGINT_ISO_FCNTL {
8071 # No options implement this inferface
8072 # This value cannot be modified here.
8075 # Requires: 1 >= CYGINT_ISO_FCNTL
8076 # CYGINT_ISO_FCNTL == 0
8079 # The following properties are affected by this value
8080 # interface CYGINT_ISO_FCNTL
8081 # Requires: 1 >= CYGINT_ISO_FCNTL
8084 # POSIX fcntl() implementation header
8086 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8088 # No user value, uncomment the following line to provide one.
8090 # value_source default
8091 # Default value: 0 0
8094 # POSIX file open implementations
8096 cdl_interface CYGINT_ISO_OPEN {
8097 # No options implement this inferface
8098 # This value cannot be modified here.
8101 # Requires: 1 >= CYGINT_ISO_OPEN
8102 # CYGINT_ISO_OPEN == 0
8105 # The following properties are affected by this value
8106 # interface CYGINT_ISO_OPEN
8107 # Requires: 1 >= CYGINT_ISO_OPEN
8110 # POSIX file open implementation header
8112 cdl_option CYGBLD_ISO_OPEN_HEADER {
8114 # No user value, uncomment the following line to provide one.
8116 # value_source default
8117 # Default value: 0 0
8121 # <sys/stat.h> definitions implementation header
8123 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8125 # No user value, uncomment the following line to provide one.
8127 # value_source default
8128 # Default value: 0 0
8131 # POSIX directory reading implementation
8133 cdl_interface CYGINT_ISO_DIRENT {
8134 # No options implement this inferface
8135 # This value cannot be modified here.
8138 # Requires: 1 >= CYGINT_ISO_DIRENT
8139 # CYGINT_ISO_DIRENT == 0
8142 # The following properties are affected by this value
8143 # interface CYGINT_ISO_DIRENT
8144 # Requires: 1 >= CYGINT_ISO_DIRENT
8147 # <dirent.h> definitions implementation header
8149 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8151 # No user value, uncomment the following line to provide one.
8153 # value_source default
8154 # Default value: 0 0
8157 # POSIX <sys/types.h> contents
8158 # This covers the types required by POSIX to be in
8161 cdl_component CYGPKG_ISO_POSIX_TYPES {
8162 # There is no associated value.
8166 # POSIX thread types implementations
8168 cdl_interface CYGINT_ISO_PTHREADTYPES {
8169 # No options implement this inferface
8170 # This value cannot be modified here.
8173 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8174 # CYGINT_ISO_PTHREADTYPES == 0
8177 # The following properties are affected by this value
8178 # interface CYGINT_ISO_PTHREADTYPES
8179 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8180 # interface CYGINT_ISO_PMUTEXTYPES
8181 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8184 # POSIX thread types implementation header
8186 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8188 # No user value, uncomment the following line to provide one.
8190 # value_source default
8191 # Default value: 0 0
8194 # POSIX mutex types implementations
8196 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8197 # No options implement this inferface
8198 # This value cannot be modified here.
8201 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8202 # CYGINT_ISO_PTHREADTYPES == 0
8206 # POSIX mutex types implementation header
8208 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8210 # No user value, uncomment the following line to provide one.
8212 # value_source default
8213 # Default value: 0 0
8216 # ssize_t implementation header
8218 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8220 # No user value, uncomment the following line to provide one.
8222 # value_source default
8223 # Default value: 0 0
8226 # Filesystem types implementation header
8228 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8230 # No user value, uncomment the following line to provide one.
8232 # value_source default
8233 # Default value: 0 0
8236 # gid_t, pid_t, uid_t implementation header
8238 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8240 # No user value, uncomment the following line to provide one.
8242 # value_source default
8243 # Default value: 0 0
8247 # Non-POSIX <sys/types.h> contents
8248 # This covers the extra types required by non-POSIX
8249 # packages to be in <sys/types.h>. These would normally
8250 # only be visible if _POSIX_SOURCE is not defined.
8252 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8253 # There is no associated value.
8257 # BSD compatible types
8259 cdl_interface CYGINT_ISO_BSDTYPES {
8260 # No options implement this inferface
8261 # This value cannot be modified here.
8264 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8265 # CYGINT_ISO_BSDTYPES == 0
8268 # The following properties are affected by this value
8269 # interface CYGINT_ISO_BSDTYPES
8270 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8275 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8277 # No user value, uncomment the following line to provide one.
8279 # value_source default
8280 # Default value: 0 0
8286 cdl_component CYGPKG_ISO_UTSNAME {
8287 # There is no associated value.
8293 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8295 # No user value, uncomment the following line to provide one.
8297 # value_source default
8298 # Default value: 0 0
8304 cdl_component CYGPKG_ISO_SCHED {
8305 # There is no associated value.
8309 # POSIX scheduler implementations
8311 cdl_interface CYGINT_ISO_SCHED_IMPL {
8312 # No options implement this inferface
8313 # This value cannot be modified here.
8316 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8317 # CYGINT_ISO_SCHED_IMPL == 0
8320 # The following properties are affected by this value
8321 # interface CYGINT_ISO_SCHED_IMPL
8322 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8325 # POSIX scheduler implementation header
8327 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8329 # No user value, uncomment the following line to provide one.
8331 # value_source default
8332 # Default value: 0 0
8338 cdl_component CYGPKG_ISO_SEMAPHORES {
8339 # There is no associated value.
8343 # POSIX semaphore implementations
8345 cdl_interface CYGINT_ISO_SEMAPHORES {
8346 # No options implement this inferface
8347 # This value cannot be modified here.
8350 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8351 # CYGINT_ISO_SEMAPHORES == 0
8354 # The following properties are affected by this value
8355 # interface CYGINT_ISO_SEMAPHORES
8356 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8359 # POSIX semaphore implementation header
8361 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8363 # No user value, uncomment the following line to provide one.
8365 # value_source default
8366 # Default value: 0 0
8370 # POSIX message queues
8372 cdl_component CYGPKG_ISO_MQUEUE {
8373 # There is no associated value.
8379 cdl_interface CYGINT_ISO_MQUEUE {
8380 # No options implement this inferface
8381 # This value cannot be modified here.
8384 # Requires: 1 >= CYGINT_ISO_MQUEUE
8385 # CYGINT_ISO_MQUEUE == 0
8388 # The following properties are affected by this value
8389 # interface CYGINT_ISO_MQUEUE
8390 # Requires: 1 >= CYGINT_ISO_MQUEUE
8391 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8392 # ActiveIf: CYGINT_ISO_MQUEUE
8393 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8394 # ActiveIf: CYGINT_ISO_MQUEUE
8397 # Implementation header
8399 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8401 # No user value, uncomment the following line to provide one.
8403 # value_source default
8404 # Default value: 0 0
8407 # Maximum number of open message queues
8409 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8410 # This option is not active
8411 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8412 # CYGINT_ISO_MQUEUE == 0
8416 # No user value, uncomment the following line to provide one.
8418 # value_source default
8419 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8420 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8421 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8425 # Maximum number of message priorities
8427 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8428 # This option is not active
8429 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8430 # CYGINT_ISO_MQUEUE == 0
8434 # No user value, uncomment the following line to provide one.
8435 # user_value 1 65535
8436 # value_source default
8437 # Default value: 1 65535
8443 cdl_component CYGPKG_ISO_PTHREAD {
8444 # There is no associated value.
8448 # POSIX pthread implementations
8450 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8451 # No options implement this inferface
8452 # This value cannot be modified here.
8454 # Current value: 0 0
8455 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8456 # CYGINT_ISO_PTHREAD_IMPL == 0
8459 # The following properties are affected by this value
8460 # interface CYGINT_ISO_PTHREAD_IMPL
8461 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8464 # POSIX pthread implementation header
8466 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8468 # No user value, uncomment the following line to provide one.
8470 # value_source default
8471 # Default value: 0 0
8474 # POSIX mutex/cond var implementations
8476 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8477 # No options implement this inferface
8478 # This value cannot be modified here.
8480 # Current value: 0 0
8481 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8482 # CYGINT_ISO_PTHREAD_MUTEX == 0
8485 # The following properties are affected by this value
8486 # interface CYGINT_ISO_PTHREAD_MUTEX
8487 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8490 # POSIX mutex/cond var implementation header
8492 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8494 # No user value, uncomment the following line to provide one.
8496 # value_source default
8497 # Default value: 0 0
8503 cdl_component CYGPKG_ISO_LIMITS {
8504 # There is no associated value.
8508 # POSIX pthread limits implementations
8510 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8511 # No options implement this inferface
8512 # This value cannot be modified here.
8515 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8516 # CYGINT_ISO_POSIX_LIMITS == 0
8519 # The following properties are affected by this value
8520 # interface CYGINT_ISO_POSIX_LIMITS
8521 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8524 # POSIX pthread limits implementation header
8526 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8528 # No user value, uncomment the following line to provide one.
8530 # value_source default
8531 # Default value: 0 0
8534 # OPEN_MAX implementation header
8536 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8538 # No user value, uncomment the following line to provide one.
8540 # value_source default
8541 # Default value: 0 0
8544 # LINK_MAX implementation header
8546 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8548 # No user value, uncomment the following line to provide one.
8550 # value_source default
8551 # Default value: 0 0
8554 # NAME_MAX implementation header
8556 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8558 # No user value, uncomment the following line to provide one.
8560 # value_source default
8561 # Default value: 0 0
8564 # PATH_MAX implementation header
8566 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8568 # No user value, uncomment the following line to provide one.
8570 # value_source default
8571 # Default value: 0 0
8577 cdl_component CYGPKG_ISO_TERMIOS {
8578 # There is no associated value.
8582 # POSIX termios implementations
8584 cdl_interface CYGINT_ISO_TERMIOS {
8585 # No options implement this inferface
8586 # This value cannot be modified here.
8589 # Requires: 1 >= CYGINT_ISO_TERMIOS
8590 # CYGINT_ISO_TERMIOS == 0
8593 # The following properties are affected by this value
8594 # interface CYGINT_ISO_TERMIOS
8595 # Requires: 1 >= CYGINT_ISO_TERMIOS
8598 # POSIX termios implementation header
8600 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8602 # No user value, uncomment the following line to provide one.
8604 # value_source default
8605 # Default value: 0 0
8611 cdl_component CYGPKG_ISO_DLFCN {
8612 # There is no associated value.
8616 # Dynamic load implementations
8618 cdl_interface CYGINT_ISO_DLFCN {
8619 # No options implement this inferface
8620 # This value cannot be modified here.
8623 # Requires: 1 >= CYGINT_ISO_DLFCN
8624 # CYGINT_ISO_DLFCN == 0
8627 # The following properties are affected by this value
8628 # interface CYGINT_ISO_DLFCN
8629 # Requires: 1 >= CYGINT_ISO_DLFCN
8632 # Dynamic load implementation header
8634 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8636 # No user value, uncomment the following line to provide one.
8638 # value_source default
8639 # Default value: 0 0
8643 # UNIX standard functions
8645 cdl_component CYGPKG_ISO_UNISTD {
8646 # There is no associated value.
8650 # POSIX timer operations implementations
8652 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8653 # No options implement this inferface
8654 # This value cannot be modified here.
8656 # Current value: 0 0
8657 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8658 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8661 # The following properties are affected by this value
8662 # interface CYGINT_ISO_POSIX_TIMER_OPS
8663 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8666 # POSIX timer operations implementation header
8668 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8670 # No user value, uncomment the following line to provide one.
8672 # value_source default
8673 # Default value: 0 0
8676 # POSIX sleep() implementations
8678 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8679 # No options implement this inferface
8680 # This value cannot be modified here.
8682 # Current value: 0 0
8683 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8684 # CYGINT_ISO_POSIX_SLEEP == 0
8687 # The following properties are affected by this value
8688 # interface CYGINT_ISO_POSIX_SLEEP
8689 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8692 # POSIX sleep() implementation header
8694 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8696 # No user value, uncomment the following line to provide one.
8698 # value_source default
8699 # Default value: 0 0
8703 # select()/poll() functions
8705 cdl_component CYGPKG_ISO_SELECT {
8706 # There is no associated value.
8710 # select() implementations
8712 cdl_interface CYGINT_ISO_SELECT {
8713 # No options implement this inferface
8714 # This value cannot be modified here.
8716 # Current value: 0 0
8717 # Requires: 1 >= CYGINT_ISO_SELECT
8718 # CYGINT_ISO_SELECT == 0
8721 # The following properties are affected by this value
8722 # interface CYGINT_ISO_SELECT
8723 # Requires: 1 >= CYGINT_ISO_SELECT
8726 # select() implementation header
8728 cdl_option CYGBLD_ISO_SELECT_HEADER {
8730 # No user value, uncomment the following line to provide one.
8732 # value_source default
8733 # Default value: 0 0
8736 # poll() implementations
8738 cdl_interface CYGINT_ISO_POLL {
8739 # No options implement this inferface
8740 # This value cannot be modified here.
8742 # Current value: 0 0
8743 # Requires: 1 >= CYGINT_ISO_POLL
8744 # CYGINT_ISO_POLL == 0
8747 # The following properties are affected by this value
8748 # interface CYGINT_ISO_POLL
8749 # Requires: 1 >= CYGINT_ISO_POLL
8752 # poll() implementation header
8754 cdl_option CYGBLD_ISO_POLL_HEADER {
8756 # No user value, uncomment the following line to provide one.
8758 # value_source default
8759 # Default value: 0 0
8763 # NetDB utility functions
8765 cdl_component CYGPKG_ISO_NETDB {
8766 # There is no associated value.
8770 # DNS implementations
8772 cdl_interface CYGINT_ISO_DNS {
8773 # No options implement this inferface
8774 # This value cannot be modified here.
8777 # Requires: 1 >= CYGINT_ISO_DNS
8778 # CYGINT_ISO_DNS == 0
8781 # The following properties are affected by this value
8782 # interface CYGINT_ISO_DNS
8783 # Requires: 1 >= CYGINT_ISO_DNS
8786 # DNS implementation header
8788 cdl_option CYGBLD_ISO_DNS_HEADER {
8790 # No user value, uncomment the following line to provide one.
8792 # value_source default
8793 # Default value: 0 0
8796 # Protocol network database implementations
8798 cdl_interface CYGINT_ISO_NETDB_PROTO {
8799 # No options implement this inferface
8800 # This value cannot be modified here.
8803 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8804 # CYGINT_ISO_NETDB_PROTO == 0
8807 # The following properties are affected by this value
8808 # interface CYGINT_ISO_NETDB_PROTO
8809 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8812 # Protocol network database implementation header
8814 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8816 # No user value, uncomment the following line to provide one.
8818 # value_source default
8819 # Default value: 0 0
8822 # Services network database implementations
8824 cdl_interface CYGINT_ISO_NETDB_SERV {
8825 # No options implement this inferface
8826 # This value cannot be modified here.
8829 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8830 # CYGINT_ISO_NETDB_SERV == 0
8833 # The following properties are affected by this value
8834 # interface CYGINT_ISO_NETDB_SERV
8835 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8838 # Services network database implementation header
8840 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8842 # No user value, uncomment the following line to provide one.
8844 # value_source default
8845 # Default value: 0 0
8850 # Package specific build options including control over
8851 # compiler flags used only in building this package,
8852 # and details of which tests are built.
8854 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8855 # There is no associated value.
8859 # Additional compiler flags
8860 # This option modifies the set of compiler flags for
8861 # building the ISO C and POSIX infrastructure package.
8862 # These flags are used in addition to the set of global flags.
8864 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8866 # No user value, uncomment the following line to provide one.
8868 # value_source default
8872 # Suppressed compiler flags
8873 # This option modifies the set of compiler flags for
8874 # building the ISO C and POSIX infrastructure package.
8875 # These flags are removed from the set of global flags
8878 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8880 # No user value, uncomment the following line to provide one.
8882 # value_source default
8889 # doc: ref/services-crc.html
8890 # This package provides support for CRC calculation. Currently
8891 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8892 # Gary S. Brown, and a 16 bit CRC.
8894 cdl_package CYGPKG_CRC {
8895 # Packages cannot be added or removed, nor can their version be changed,
8896 # simply by editing their value. Instead the appropriate configuration
8897 # should be used to perform these actions.
8899 # This value cannot be modified here.
8901 # Current value: 1 current
8903 # The following properties are affected by this value
8904 # package CYGPKG_COMPRESS_ZLIB
8905 # Requires: CYGPKG_CRC
8911 cdl_option CYGPKG_CRC_TESTS {
8912 # Calculated value: "tests/crc_test"
8914 # Current_value: tests/crc_test
8918 # Zlib compress and decompress package
8919 # This package provides support for compression and
8922 cdl_package CYGPKG_COMPRESS_ZLIB {
8923 # Packages cannot be added or removed, nor can their version be changed,
8924 # simply by editing their value. Instead the appropriate configuration
8925 # should be used to perform these actions.
8927 # This value cannot be modified here.
8929 # Current value: 1 current
8930 # Requires: CYGPKG_ISOINFRA
8931 # CYGPKG_ISOINFRA == current
8933 # Requires: CYGPKG_CRC
8934 # CYGPKG_CRC == current
8937 # The following properties are affected by this value
8938 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8939 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8943 # Override memory allocation routines.
8945 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8946 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8947 # This value cannot be modified here.
8951 # The following properties are affected by this value
8952 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8953 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8956 # Should deflate() produce 'gzip' compatible output?
8957 # If this option is set then the output of calling deflate()
8958 # will be wrapped up as a 'gzip' compatible file.
8960 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8962 # No user value, uncomment the following line to provide one.
8964 # value_source default
8968 # Does this library need malloc?
8969 # This pseudo-option will force the memalloc library to be
8970 # required iff the application does not provide it's own
8973 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8974 # This option is not active
8975 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8976 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8980 # No user value, uncomment the following line to provide one.
8982 # value_source default
8984 # Requires: CYGPKG_MEMALLOC
8985 # CYGPKG_MEMALLOC == current
8989 # Include stdio-like utility functions
8990 # This option enables the stdio-like zlib utility functions
8991 # (gzread/gzwrite and friends) provided in gzio.c.
8993 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8995 # No user value, uncomment the following line to provide one.
8997 # value_source default
8998 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8999 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
9001 # Requires: CYGINT_ISO_STDIO_FILEPOS
9002 # CYGINT_ISO_STDIO_FILEPOS == 0
9004 # Requires: CYGINT_ISO_STRING_STRFUNCS
9005 # CYGINT_ISO_STRING_STRFUNCS == 1
9007 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
9008 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
9010 # Requires: CYGINT_ISO_STDIO_FILEACCESS
9011 # CYGINT_ISO_STDIO_FILEACCESS == 0
9015 # Zlib compress and decompress package build options
9016 # Package specific build options including control over
9017 # compiler flags used only in building this package,
9018 # and details of which tests are built.
9020 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9021 # There is no associated value.
9025 # Additional compiler flags
9026 # This option modifies the set of compiler flags for
9027 # building this package. These flags are used in addition
9028 # to the set of global flags.
9030 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9032 # No user value, uncomment the following line to provide one.
9033 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9034 # value_source default
9035 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9038 # Suppressed compiler flags
9039 # This option modifies the set of compiler flags for
9040 # building this package. These flags are removed from
9041 # the set of global flags if present.
9043 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9045 # No user value, uncomment the following line to provide one.
9046 # user_value -Wstrict-prototypes
9047 # value_source default
9048 # Default value: -Wstrict-prototypes
9051 # Additional compiler flags
9052 # This option modifies the set of compiler flags for
9053 # building this package. These flags are used in addition
9054 # to the set of global flags.
9056 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9058 # No user value, uncomment the following line to provide one.
9060 # value_source default
9064 # Suppressed compiler flags
9065 # This option modifies the set of compiler flags for
9066 # building this package. These flags are removed from
9067 # the set of global flags if present.
9069 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9071 # No user value, uncomment the following line to provide one.
9073 # value_source default
9080 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9081 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9083 # Current_value: tests/zlib1.c tests/zlib2.c
9087 # FLASH device drivers
9088 # doc: ref/flash.html
9089 # This option enables drivers for basic I/O services on
9092 cdl_package CYGPKG_IO_FLASH {
9093 # Packages cannot be added or removed, nor can their version be changed,
9094 # simply by editing their value. Instead the appropriate configuration
9095 # should be used to perform these actions.
9097 # This value cannot be modified here.
9099 # Current value: 1 current
9100 # Requires: CYGPKG_ISOINFRA
9101 # CYGPKG_ISOINFRA == current
9103 # Requires: CYGINT_ISO_STRING_STRFUNCS
9104 # CYGINT_ISO_STRING_STRFUNCS == 1
9107 # The following properties are affected by this value
9108 # component CYGSEM_REDBOOT_FLASH_CONFIG
9109 # DefaultValue: CYGPKG_IO_FLASH != 0
9110 # package CYGPKG_DEVS_FLASH_ONMXC
9111 # ActiveIf: CYGPKG_IO_FLASH
9115 # Hardware FLASH device drivers
9116 # This option enables the hardware device drivers
9117 # for the current platform.
9119 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9120 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9121 # This value cannot be modified here.
9125 # The following properties are affected by this value
9126 # component CYGPKG_REDBOOT_FLASH
9127 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9130 # Hardware FLASH device drivers are not in RAM
9131 # Use of this interface is deprecated.
9132 # Drivers should make sure that the functions are
9133 # linked to RAM by putting them in .2ram sections.
9135 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9136 # No options implement this inferface
9137 # This value cannot be modified here.
9139 # Current value: 0 0
9140 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9141 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9144 # The following properties are affected by this value
9145 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9146 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9149 # Hardware can support block locking
9150 # This option will be enabled by devices which can support
9151 # locking (write-protection) of individual blocks.
9153 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9154 # No options implement this inferface
9155 # This value cannot be modified here.
9157 # Current value: 0 0
9159 # The following properties are affected by this value
9160 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9161 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9164 # Hardware cannot support direct access to FLASH memory
9165 # This option will be asserted by devices which cannot support
9166 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9167 # devices). In these cases, the driver must provide an appropriate
9168 # hardware access function.
9170 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9172 # No user value, uncomment the following line to provide one.
9174 # The inferred value should not be edited directly.
9176 # value_source inferred
9178 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9179 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9182 # The following properties are affected by this value
9183 # option CYGPRI_REDBOOT_ZLIB_FLASH
9184 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9185 # component CYGHWR_DEVS_FLASH_MMC
9186 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9187 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9188 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9189 # option CYGHWR_DEVS_FLASH_MMC_SD
9190 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9191 # option CYGHWR_DEVS_FLASH_MXC_NAND
9192 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9195 # Display status messages during flash operations
9196 # Selecting this option will cause the drivers to print status
9197 # messages as various flash operations are undertaken.
9199 cdl_option CYGSEM_IO_FLASH_CHATTER {
9201 # No user value, uncomment the following line to provide one.
9203 # value_source default
9207 # Verify data programmed to flash
9208 # Selecting this option will cause verification of data
9209 # programmed to flash.
9211 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9213 # No user value, uncomment the following line to provide one.
9215 # The inferred value should not be edited directly.
9217 # value_source inferred
9220 # The following properties are affected by this value
9221 # option CYGSEM_IO_FLASH_READ_INDIRECT
9222 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9225 # Platform has flash soft DIP switch write-protect
9226 # Selecting this option will cause the state of a hardware jumper or
9227 # dipswitch to be read by software to determine whether the flash is
9228 # write-protected or not.
9230 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9232 # No user value, uncomment the following line to provide one.
9234 # value_source default
9238 # Instantiate in I/O block device API
9239 # Provides a block device accessible using the standard I/O
9240 # API ( cyg_io_read() etc. )
9242 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9243 # This option is not active
9244 # ActiveIf constraint: CYGPKG_IO
9245 # CYGPKG_IO (unknown) == 0
9249 # No user value, uncomment the following line to provide one.
9251 # value_source default
9256 # Name of flash device 1 block device
9258 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9259 # This option is not active
9260 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9261 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9264 # No user value, uncomment the following line to provide one.
9265 # user_value "\"/dev/flash1\""
9266 # value_source default
9267 # Default value: "\"/dev/flash1\""
9272 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9273 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9274 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9275 # This option is not active
9276 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9278 # This value cannot be modified here.
9281 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9282 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9285 # The following properties are affected by this value
9286 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9287 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9290 # Static configuration
9291 # This configures the flash device 1 block device
9292 # with static base and length
9294 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9295 # This option is not active
9296 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9299 # No user value, uncomment the following line to provide one.
9301 # value_source default
9306 # Start offset from flash base
9307 # This gives the offset from the base of flash which this
9308 # block device corresponds to.
9310 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9311 # This option is not active
9312 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9315 # No user value, uncomment the following line to provide one.
9316 # user_value 0x00100000
9317 # value_source default
9318 # Default value: 0x00100000
9322 # This gives the length of the region of flash given over
9323 # to this block device.
9325 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9326 # This option is not active
9327 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9330 # No user value, uncomment the following line to provide one.
9331 # user_value 0x00100000
9332 # value_source default
9333 # Default value: 0x00100000
9337 # Configuration from FIS
9338 # This configures the flash device 1 block device
9341 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9342 # This option is not active
9343 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9346 # No user value, uncomment the following line to provide one.
9348 # value_source default
9355 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9356 # This option is not active
9357 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9358 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9361 # No user value, uncomment the following line to provide one.
9362 # user_value "\"jffs2\""
9363 # value_source default
9364 # Default value: "\"jffs2\""
9370 # Flash device driver build options
9371 # Package specific build options including control over
9372 # compiler flags used only in building this package,
9373 # and details of which tests are built.
9375 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9376 # There is no associated value.
9380 # Additional compiler flags
9381 # This option modifies the set of compiler flags for
9382 # building the flash device drivers. These flags are used in addition
9383 # to the set of global flags.
9385 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9387 # No user value, uncomment the following line to provide one.
9389 # value_source default
9393 # Suppressed compiler flags
9394 # This option modifies the set of compiler flags for
9395 # building the flash device drivers. These flags are removed from
9396 # the set of global flags if present.
9398 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9400 # No user value, uncomment the following line to provide one.
9402 # value_source default
9406 # Flash device driver tests
9407 # This option specifies the set of tests for the flash device drivers.
9409 cdl_component CYGPKG_IO_FLASH_TESTS {
9410 # Calculated value: "tests/flash1"
9412 # Current_value: tests/flash1
9416 # Start offset from flash base
9417 # This gives the offset from the base of flash where tests
9418 # can be run. It is important to set this correctly, as an
9419 # incorrect value could allow the tests to write over critical
9420 # portions of the FLASH device and possibly render the target
9421 # board totally non-functional.
9423 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9425 # No user value, uncomment the following line to provide one.
9426 # user_value 0x00100000
9427 # value_source default
9428 # Default value: 0x00100000
9432 # This gives the length of the region of flash used for testing.
9434 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9436 # No user value, uncomment the following line to provide one.
9437 # user_value 0x00100000
9438 # value_source default
9439 # Default value: 0x00100000
9444 # Support FLASH memory on Freescale MXC platforms
9446 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9447 # Packages cannot be added or removed, nor can their version be changed,
9448 # simply by editing their value. Instead the appropriate configuration
9449 # should be used to perform these actions.
9451 # ActiveIf constraint: CYGPKG_IO_FLASH
9452 # CYGPKG_IO_FLASH == current
9455 # This value cannot be modified here.
9457 # Current value: 1 current
9461 # MXC platform MMC card support
9462 # When this option is enabled, it indicates MMC card is
9463 # supported on the MXC platforms
9465 cdl_component CYGHWR_DEVS_FLASH_MMC {
9467 # No user value, uncomment the following line to provide one.
9469 # value_source default
9471 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9472 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9475 # The following properties are affected by this value
9476 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9477 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9478 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9479 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9480 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9481 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9482 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9483 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9487 # MXC platform MMC card for newer SDHC controllers
9489 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9490 # This option is not active
9491 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9492 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9493 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9494 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9495 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9496 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9497 # CYGPKG_HAL_ARM_MX51 == current
9498 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
9502 # No user value, uncomment the following line to provide one.
9504 # value_source default
9506 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9507 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9511 # MXC platform MMC card for older MMC/SD controllers
9513 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9514 # This option is not active
9515 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9516 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9517 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9518 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9522 # No user value, uncomment the following line to provide one.
9524 # value_source default
9526 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9527 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9532 # MXC platform NOR flash memory support
9533 # When this option is enabled, it indicates NOR flash is
9534 # supported on the MXC platforms
9536 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9538 # No user value, uncomment the following line to provide one.
9540 # The inferred value should not be edited directly.
9542 # value_source inferred
9545 # The following properties are affected by this value
9546 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9547 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9548 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9549 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9550 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9551 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9552 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9553 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9554 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9555 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9558 # MXC platform NAND flash memory support
9559 # When this option is enabled, it indicates NAND flash is
9560 # supported on the MXC platforms
9562 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9564 # No user value, uncomment the following line to provide one.
9566 # The inferred value should not be edited directly.
9568 # value_source inferred
9570 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9571 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9574 # The following properties are affected by this value
9575 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9576 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9577 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9578 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9579 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9580 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9581 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9582 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9583 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9584 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9585 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9586 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9589 # i.MX platform SPI NOR flash memory support
9590 # When this option is enabled, it indicates SPI NOR flash is
9591 # supported on the i.MX platforms
9593 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9595 # No user value, uncomment the following line to provide one.
9597 # value_source default
9599 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9600 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9604 # MXC platform ATA support
9605 # When this option is enabled, it indicates ATA is
9606 # supported on the MXC platforms
9608 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9610 # No user value, uncomment the following line to provide one.
9612 # value_source default
9616 # Use a flash based Bad Block Table
9618 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9619 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9620 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9623 # There is no associated value.
9627 # When this option is enabled, the driver will search for a flash
9628 # based bad block table
9630 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9632 # No user value, uncomment the following line to provide one.
9634 # value_source default
9638 # header file defining the NAND BBT descriptor
9639 # defines the name of the header file that describes the BBT layout
9641 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9643 # No user value, uncomment the following line to provide one.
9645 # The inferred value should not be edited directly.
9646 inferred_value 1 <cyg/io/tx51_nand_bbt.h>
9647 # value_source inferred
9648 # Default value: 0 0
9651 # Number of blocks to reserve for BBT
9652 # Number of blocks to reserve for BBT
9654 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9656 # No user value, uncomment the following line to provide one.
9658 # value_source default
9663 # MXC platform multi flash memory support
9664 # When this option is enabled, it indicates multi flashes are
9665 # supported on the MXC platforms (like NAND and NOR)
9667 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9668 # This option is not active
9669 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9670 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9671 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9672 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9673 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9674 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9675 # CYGHWR_DEVS_FLASH_MMC == 0
9676 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9677 # CYGHWR_DEVS_FLASH_MMC == 0
9681 # No user value, uncomment the following line to provide one.
9683 # The inferred value should not be edited directly.
9685 # value_source inferred
9689 # MXC platform NAND flash reset workaround support
9690 # When this option is enabled, it indicates 0xFFFF is used for
9691 # the NAND reset command instead of 0xFF.
9693 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9694 # No options implement this inferface
9695 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9696 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9699 # This value cannot be modified here.
9706 # Dynamic memory allocation
9707 # doc: ref/memalloc.html
9708 # This package provides memory allocator infrastructure required for
9709 # dynamic memory allocators, including the ISO standard malloc
9710 # interface. It also contains some sample implementations.
9712 cdl_package CYGPKG_MEMALLOC {
9713 # Packages cannot be added or removed, nor can their version be changed,
9714 # simply by editing their value. Instead the appropriate configuration
9715 # should be used to perform these actions.
9717 # This value cannot be modified here.
9719 # Current value: 1 current
9721 # The following properties are affected by this value
9722 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9723 # Requires: CYGPKG_MEMALLOC
9727 # Memory allocator implementations
9728 # This component contains configuration options related to the
9729 # various memory allocators available.
9731 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9732 # There is no associated value.
9736 # Fixed block allocator
9737 # This component contains configuration options related to the
9738 # fixed block memory allocator.
9740 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9741 # There is no associated value.
9746 # With this option enabled, this allocator will be
9747 # made thread-safe. Additionally allocation functions
9748 # are made available that allow a thread to wait
9749 # until memory is available.
9751 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9752 # This option is not active
9753 # ActiveIf constraint: CYGPKG_KERNEL
9754 # CYGPKG_KERNEL (unknown) == 0
9758 # No user value, uncomment the following line to provide one.
9760 # value_source default
9765 # Simple variable block allocator
9766 # This component contains configuration options related to the
9767 # simple variable block memory allocator. This allocator is not
9768 # very fast, and in particular does not scale well with large
9769 # numbers of allocations. It is however very compact in terms of
9770 # code size and does not have very much overhead per allocation.
9772 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9773 # There is no associated value.
9778 # With this option enabled, this allocator will be
9779 # made thread-safe. Additionally allocation functions
9780 # are added that allow a thread to wait until memory
9781 # are made available that allow a thread to wait
9782 # until memory is available.
9784 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9785 # This option is not active
9786 # ActiveIf constraint: CYGPKG_KERNEL
9787 # CYGPKG_KERNEL (unknown) == 0
9791 # No user value, uncomment the following line to provide one.
9793 # value_source default
9798 # The variable-block memory allocator can perform coalescing
9799 # of memory whenever the application code releases memory back
9800 # to the pool. This coalescing reduces the possibility of
9801 # memory fragmentation problems, but involves extra code and
9804 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9806 # No user value, uncomment the following line to provide one.
9808 # value_source default
9811 # The following properties are affected by this value
9812 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9813 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9818 # This component contains configuration options related to the
9819 # port of Doug Lea's memory allocator, normally known as
9820 # dlmalloc. dlmalloc has a reputation for being both fast
9821 # and space-conserving, as well as resisting fragmentation well.
9822 # It is a common choice for a general purpose allocator and
9823 # has been used in both newlib and Linux glibc.
9825 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9826 # There is no associated value.
9831 # Doug Lea's malloc implementation has substantial amounts
9832 # of internal checking in order to verify the operation
9833 # and consistency of the allocator. However this imposes
9834 # substantial overhead on each operation. Therefore this
9835 # checking may be individually disabled.
9837 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9839 # No user value, uncomment the following line to provide one.
9841 # value_source default
9842 # Default value: 0 != CYGDBG_USE_ASSERTS
9843 # CYGDBG_USE_ASSERTS == 0
9845 # Requires: CYGDBG_USE_ASSERTS
9846 # CYGDBG_USE_ASSERTS == 0
9851 # With this option enabled, this allocator will be
9852 # made thread-safe. Additionally allocation functions
9853 # are made available that allow a thread to wait
9854 # until memory is available.
9856 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9857 # This option is not active
9858 # ActiveIf constraint: CYGPKG_KERNEL
9859 # CYGPKG_KERNEL (unknown) == 0
9863 # No user value, uncomment the following line to provide one.
9865 # value_source default
9867 # Requires: CYGPKG_KERNEL
9868 # CYGPKG_KERNEL (unknown) == 0
9872 # Support more than one instance
9873 # Having this option disabled allows important
9874 # implementation structures to be declared as a single
9875 # static instance, allowing faster access. However this
9876 # would fail if there is more than one instance of
9877 # the dlmalloc allocator class. Therefore this option can
9878 # be enabled if multiple instances are required. Note: as
9879 # a special case, if this allocator is used as the
9880 # implementation of malloc, and it can be determined there
9881 # is more than one malloc pool, then this option will be
9884 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9886 # No user value, uncomment the following line to provide one.
9888 # value_source default
9892 # Use system memmove() and memset()
9893 # This may be used to control whether memset() and memmove()
9894 # are used within the implementation. The alternative is
9895 # to use some macro equivalents, which some people report
9896 # are faster in some circumstances.
9898 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9900 # No user value, uncomment the following line to provide one.
9902 # value_source default
9903 # Default value: 0 != CYGPKG_ISOINFRA
9904 # CYGPKG_ISOINFRA == current
9906 # Requires: CYGPKG_ISOINFRA
9907 # CYGPKG_ISOINFRA == current
9911 # Minimum alignment of allocated blocks
9912 # This option controls the minimum alignment that the
9913 # allocated memory blocks are aligned on, specified as
9914 # 2^N. Note that using large mininum alignments can lead
9915 # to excessive memory wastage.
9917 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9919 # No user value, uncomment the following line to provide one.
9921 # value_source default
9923 # Legal values: 3 to 10
9927 # Variable block allocator with separate metadata
9928 # This component contains configuration options related to the
9929 # variable block memory allocator with separate metadata.
9931 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9932 # There is no associated value.
9937 # With this option enabled, this allocator will be
9938 # made thread-safe. Additionally allocation functions
9939 # are made available that allow a thread to wait
9940 # until memory is available.
9942 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9943 # This option is not active
9944 # ActiveIf constraint: CYGPKG_KERNEL
9945 # CYGPKG_KERNEL (unknown) == 0
9949 # No user value, uncomment the following line to provide one.
9951 # value_source default
9957 # Kernel C API support for memory allocation
9958 # This option must be enabled to provide the extensions required
9959 # to support integration into the kernel C API.
9961 cdl_option CYGFUN_MEMALLOC_KAPI {
9962 # This option is not active
9963 # ActiveIf constraint: CYGPKG_KERNEL
9964 # CYGPKG_KERNEL (unknown) == 0
9968 # No user value, uncomment the following line to provide one.
9970 # value_source default
9971 # Default value: CYGFUN_KERNEL_API_C
9972 # CYGFUN_KERNEL_API_C (unknown) == 0
9976 # malloc(0) returns NULL
9977 # This option controls the behavior of malloc(0) ( or calloc with
9978 # either argument 0 ). It is permitted by the standard to return
9979 # either a NULL pointer or a unique pointer. Enabling this option
9980 # forces a NULL pointer to be returned.
9982 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9984 # No user value, uncomment the following line to provide one.
9986 # value_source default
9990 # Breakpoint site when running out of memory
9991 # Whenever the system runs out of memory, it invokes this function
9992 # before either going to sleep waiting for memory to become
9993 # available or returning failure.
9995 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9997 # No user value, uncomment the following line to provide one.
9999 # value_source default
10003 # malloc() and supporting allocators
10004 # This component enables support for dynamic memory
10005 # allocation as supplied by the functions malloc(),
10006 # free(), calloc() and realloc(). As these
10007 # functions are often used, but can have quite an
10008 # overhead, disabling them here can ensure they
10009 # cannot even be used accidentally when static
10010 # allocation is preferred. Within this component are
10011 # various allocators that can be selected for use
10012 # as the underlying implementation of the dynamic
10013 # allocation functions.
10015 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10016 # ActiveIf constraint: CYGPKG_ISOINFRA
10017 # CYGPKG_ISOINFRA == current
10021 # No user value, uncomment the following line to provide one.
10023 # value_source default
10028 # Use external heap definition
10029 # This option allows other components in the
10030 # system to override the default system
10031 # provision of heap memory pools. This should
10032 # be set to a header which provides the equivalent
10033 # definitions to <pkgconf/heaps.hxx>.
10035 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10037 # No user value, uncomment the following line to provide one.
10039 # value_source default
10040 # Default value: 0 0
10043 # Use external implementation of joining multiple heaps
10044 # The default implementation of joining multiple heaps
10045 # is fine for the case where there are multiple disjoint
10046 # memory regions of the same type. However, in a system
10047 # there might be e.g. a small amount of internal SRAM and
10048 # a large amount of external DRAM. The SRAM is faster and
10049 # the DRAM is slower. An application can implement some
10050 # heuristic to choose which pool to allocate from. This
10051 # heuristic can be highly application specific.
10053 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10055 # No user value, uncomment the following line to provide one.
10057 # value_source default
10058 # Default value: 0 0
10061 # malloc() allocator implementations
10063 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10064 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10065 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10066 # This value cannot be modified here.
10069 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10070 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10073 # The following properties are affected by this value
10074 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10075 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10078 # malloc() implementation instantiation data
10079 # Memory allocator implementations that are capable of being
10080 # used underneath malloc() must be instantiated. The code
10081 # to do this is set in this option. It is only intended to
10082 # be set by the implementation, not the user.
10084 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10086 # No user value, uncomment the following line to provide one.
10087 # user_value <cyg/memalloc/dlmalloc.hxx>
10088 # value_source default
10089 # Default value: <cyg/memalloc/dlmalloc.hxx>
10091 # The following properties are affected by this value
10092 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10093 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10094 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10095 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10098 # Simple variable block implementation
10099 # This causes malloc() to use the simple
10100 # variable block allocator.
10102 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10104 # No user value, uncomment the following line to provide one.
10106 # value_source default
10108 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10109 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10111 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10112 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10116 # Doug Lea's malloc implementation
10117 # This causes malloc() to use a version of Doug Lea's
10118 # malloc (dlmalloc) as the underlying implementation.
10120 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10122 # No user value, uncomment the following line to provide one.
10124 # value_source default
10126 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10127 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10132 # Size of the fallback dynamic memory pool in bytes
10133 # If *no* heaps are configured in your memory layout,
10134 # dynamic memory allocation by
10135 # malloc() and calloc() must be from a fixed-size,
10136 # contiguous memory pool (note here that it is the
10137 # pool that is of a fixed size, but malloc() is still
10138 # able to allocate variable sized chunks of memory
10139 # from it). This option is the size
10140 # of that pool, in bytes. Note that not all of
10141 # this is available for programs to
10142 # use - some is needed for internal information
10143 # about memory regions, and some may be lost to
10144 # ensure that memory allocation only returns
10145 # memory aligned on word (or double word)
10146 # boundaries - a very common architecture
10149 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10151 # No user value, uncomment the following line to provide one.
10153 # value_source default
10154 # Default value: 16384
10155 # Legal values: 32 to 0x7fffffff
10158 # Common memory allocator package build options
10159 # Package specific build options including control over
10160 # compiler flags used only in building this package,
10161 # and details of which tests are built.
10163 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10164 # There is no associated value.
10168 # Additional compiler flags
10169 # This option modifies the set of compiler flags for
10170 # building this package. These flags are used in addition
10171 # to the set of global flags.
10173 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10175 # No user value, uncomment the following line to provide one.
10176 # user_value "-fno-rtti -Woverloaded-virtual"
10177 # value_source default
10178 # Default value: "-fno-rtti -Woverloaded-virtual"
10181 # Suppressed compiler flags
10182 # This option modifies the set of compiler flags for
10183 # building this package. These flags are removed from
10184 # the set of global flags if present.
10186 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10188 # No user value, uncomment the following line to provide one.
10189 # user_value -Wno-pointer-sign
10190 # value_source default
10191 # Default value: -Wno-pointer-sign
10195 # This option specifies the set of tests for this package.
10197 cdl_option CYGPKG_MEMALLOC_TESTS {
10198 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10200 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10205 # Common error code support
10206 # This package contains the common list of error and
10207 # status codes. It is held centrally to allow
10208 # packages to interchange error codes and status
10209 # codes in a common way, rather than each package
10210 # having its own conventions for error/status
10211 # reporting. The error codes are modelled on the
10212 # POSIX style naming e.g. EINVAL etc. This package
10213 # also provides the standard strerror() function to
10214 # convert error codes to textual representation, as
10215 # well as an implementation of the errno idiom.
10217 cdl_package CYGPKG_ERROR {
10218 # Packages cannot be added or removed, nor can their version be changed,
10219 # simply by editing their value. Instead the appropriate configuration
10220 # should be used to perform these actions.
10222 # This value cannot be modified here.
10224 # Current value: 1 current
10225 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10226 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10232 # This package controls the behaviour of the
10233 # errno variable (or more strictly, expression)
10236 cdl_component CYGPKG_ERROR_ERRNO {
10238 # No user value, uncomment the following line to provide one.
10240 # value_source default
10242 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10243 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10249 # This option controls whether the standard error
10250 # code reporting variable errno is a per-thread
10251 # variable, rather than global.
10253 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10255 # No user value, uncomment the following line to provide one.
10257 # The inferred value should not be edited directly.
10259 # value_source inferred
10261 # Requires: CYGVAR_KERNEL_THREADS_DATA
10262 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10267 # Trace verbosity level for debugging the errno
10268 # retrieval mechanism in errno.cxx. Increase this
10269 # value to get additional trace output.
10271 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10273 # No user value, uncomment the following line to provide one.
10275 # value_source default
10277 # Legal values: 0 to 1
10281 # strerror function
10282 # This package controls the presence and behaviour of the
10283 # strerror() function from <string.h>
10285 cdl_option CYGPKG_ERROR_STRERROR {
10287 # No user value, uncomment the following line to provide one.
10289 # value_source default
10291 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10292 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10296 # Error package build options
10297 # Package specific build options including control over
10298 # compiler flags used only in building this package,
10299 # and details of which tests are built.
10301 cdl_component CYGPKG_ERROR_OPTIONS {
10302 # There is no associated value.
10306 # Additional compiler flags
10307 # This option modifies the set of compiler flags for
10308 # building the error package. These flags are used in addition
10309 # to the set of global flags.
10311 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10313 # No user value, uncomment the following line to provide one.
10315 # value_source default
10316 # Default value: ""
10319 # Suppressed compiler flags
10320 # This option modifies the set of compiler flags for
10321 # building the error package. These flags are removed from
10322 # the set of global flags if present.
10324 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10326 # No user value, uncomment the following line to provide one.
10328 # value_source default
10329 # Default value: ""
10334 # I2C driver for FSL MXC-based platforms
10336 cdl_package CYGPKG_DEVS_MXC_I2C {
10337 # Packages cannot be added or removed, nor can their version be changed,
10338 # simply by editing their value. Instead the appropriate configuration
10339 # should be used to perform these actions.
10341 # This value cannot be modified here.
10343 # Current value: 1 current
10346 # ipu driver for mxc
10348 cdl_package CYGPKG_DEVS_IMX_IPU {
10349 # Packages cannot be added or removed, nor can their version be changed,
10350 # simply by editing their value. Instead the appropriate configuration
10351 # should be used to perform these actions.
10353 # This value cannot be modified here.
10355 # Current value: 1 current
10357 # The following properties are affected by this value
10358 # option CYGHWR_MX51_LCD_LOGO
10359 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10363 # IPU version 3EX support
10364 # When this option is enabled, it indicates the IPU version
10367 cdl_option CYGHWR_DEVS_IPU_3_EX {
10369 # No user value, uncomment the following line to provide one.
10371 # The inferred value should not be edited directly.
10373 # value_source inferred
10377 # IPU version 3D support
10378 # When this option is enabled, it indicates the IPU version
10381 cdl_option CYGHWR_DEVS_IPU_3_D {
10383 # No user value, uncomment the following line to provide one.
10385 # value_source default