1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX53 current ;
34 package -hardware CYGPKG_HAL_ARM_TX53KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX53 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX53
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX53 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX53 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX53 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
803 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
804 # CYGPKG_HAL_ARM_MX53 == current
808 # No user value, uncomment the following line to provide one.
810 # value_source default
815 # Ethernet transceiver (PHY) support
816 # API for ethernet PHY devices
818 cdl_package CYGPKG_DEVS_ETH_PHY {
819 # Packages cannot be added or removed, nor can their version be changed,
820 # simply by editing their value. Instead the appropriate configuration
821 # should be used to perform these actions.
823 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
824 # CYGPKG_IO_ETH_DRIVERS == current
827 # This value cannot be modified here.
829 # Current value: 1 current
830 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
831 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
836 # Enable driver debugging
837 # Enables the diagnostic debug messages on the
840 cdl_option CYGDBG_DEVS_ETH_PHY {
842 # No user value, uncomment the following line to provide one.
844 # value_source default
848 # Time period (seconds) to wait for auto-negotiation
849 # The length of time to wait for auto-negotiation to complete
850 # before giving up and declaring the link dead/missing.
852 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
854 # No user value, uncomment the following line to provide one.
856 # value_source default
861 # Include support for National Semiconductor DP83847 DsPHYTER II
863 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
865 # No user value, uncomment the following line to provide one.
867 # value_source default
872 # Include support for AMD 79C874 NetPHY
874 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
876 # No user value, uncomment the following line to provide one.
878 # value_source default
883 # Include support for Intel LXT972xxx PHY
885 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
887 # No user value, uncomment the following line to provide one.
889 # value_source default
894 # Include support for ICS 1890 PHY
896 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
898 # No user value, uncomment the following line to provide one.
900 # value_source default
905 # Include support for ICS 1892 PHY
907 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
909 # No user value, uncomment the following line to provide one.
911 # value_source default
916 # Include support for ICS 1893 and 1893AF PHY
918 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
920 # No user value, uncomment the following line to provide one.
922 # value_source default
927 # Include support for the Davicom DM9161A PHY
929 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
931 # No user value, uncomment the following line to provide one.
933 # value_source default
938 # Include support for the Micrel KS8721 PHY
940 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
942 # No user value, uncomment the following line to provide one.
944 # value_source default
949 # Include support for SMSC LAN8700 NetPHY
951 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
953 # No user value, uncomment the following line to provide one.
955 # The inferred value should not be edited directly.
957 # value_source inferred
960 # The following properties are affected by this value
961 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
962 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
967 # ISO C library internationalization functions
969 # This package provides internationalization functions specified by the
970 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
971 # functionality and <ctype.h> functionality.
973 cdl_package CYGPKG_LIBC_I18N {
974 # Packages cannot be added or removed, nor can their version be changed,
975 # simply by editing their value. Instead the appropriate configuration
976 # should be used to perform these actions.
978 # This value cannot be modified here.
980 # Current value: 1 current
981 # Requires: CYGPKG_ISOINFRA
982 # CYGPKG_ISOINFRA == current
988 # These options determine which locales other than the "C" locale
989 # are supported and hence contribute to the size of the executable.
991 cdl_component CYGPKG_LIBC_I18N_LOCALES {
992 # There is no associated value.
996 # Support for multiple locales required
998 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
999 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1002 # This value cannot be modified here.
1004 # Current value: 0 0
1005 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1006 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1009 # The following properties are affected by this value
1012 # C-SJIS locale support
1013 # This option controls if the "C-SJIS" locale will be
1014 # supported by setlocale(). The locale is a hybrid locale
1015 # that is mostly the "C" locale with Japanese SJIS multibyte
1018 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1020 # No user value, uncomment the following line to provide one.
1022 # value_source default
1025 # The following properties are affected by this value
1026 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1027 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1028 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1029 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1032 # C-JIS locale support
1033 # This option controls if the "C-JIS" locale will be
1034 # supported by setlocale(). The locale is a hybrid locale
1035 # that is mostly the "C" locale with Japanese JIS multibyte
1038 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1040 # No user value, uncomment the following line to provide one.
1042 # value_source default
1045 # The following properties are affected by this value
1046 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1047 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1048 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1049 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1052 # C-EUCJP locale support
1053 # This option controls if the "C-EUCJP" locale will be
1054 # supported by setlocale(). The locale is a hybrid locale
1055 # that is mostly the "C" locale with Japanese EUCJP multibyte
1058 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1060 # No user value, uncomment the following line to provide one.
1062 # value_source default
1065 # The following properties are affected by this value
1066 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1067 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1068 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1069 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1073 # Newlib's ctype implementation
1074 # This option enables the implementation of the ctype functions
1075 # that comes with newlib. It is table driven and therefore
1076 # exhibits different performance characteristics. It also offers
1077 # a limited amount of binary compatibility
1078 # with newlib so that programs linked against newlib ctype/locale
1079 # do not need to be recompiled when linked with eCos.
1081 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1083 # No user value, uncomment the following line to provide one.
1085 # value_source default
1087 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1088 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1092 # Per-thread multibyte state
1093 # This option controls whether the multibyte character
1094 # handling functions mblen(), mbtowc(), and wctomb(),
1095 # have their state recorded on a per-thread
1096 # basis rather than global. If this option is
1097 # disabled, some per-thread space can be saved.
1098 # Enabling this option will use three slots
1099 # of kernel per-thread data. You should ensure you
1100 # have enough slots configured for all your
1103 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1104 # This option is not active
1105 # ActiveIf constraint: CYGPKG_KERNEL
1106 # CYGPKG_KERNEL (unknown) == 0
1110 # No user value, uncomment the following line to provide one.
1112 # value_source default
1113 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1114 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1116 # Requires: CYGVAR_KERNEL_THREADS_DATA
1117 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1121 # Size of locale name strings
1122 # This option controls the maximum size of
1123 # locale names and is used, among other things
1124 # to instantiate a static string used
1125 # as a return value from the
1126 # setlocale() function. When requesting the
1127 # current locale settings with LC_ALL, a string
1128 # must be constructed to contain this data, rather
1129 # than just returning a constant string. This
1130 # string data is stored in the static string.
1131 # This depends on the length of locale names,
1132 # hence this option. If just the C locale is
1133 # present, this option can be set as low as 2.
1135 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1137 # No user value, uncomment the following line to provide one.
1139 # value_source default
1140 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1141 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1142 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1145 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1146 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1147 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1151 # Inline versions of <ctype.h> functions
1152 # This option chooses whether the simple character
1153 # classification and conversion functions (e.g.
1154 # isupper(), isalpha(), toupper(), etc.)
1155 # from <ctype.h> are available as inline
1156 # functions. This may improve performance and as
1157 # the functions are small, may even improve code
1160 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1162 # No user value, uncomment the following line to provide one.
1164 # value_source default
1166 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1167 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1171 # C library i18n functions build options
1172 # Package specific build options including control over
1173 # compiler flags used only in building this package,
1174 # and details of which tests are built.
1176 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1177 # There is no associated value.
1181 # Additional compiler flags
1182 # This option modifies the set of compiler flags for
1183 # building the C library. These flags are used in addition
1184 # to the set of global flags.
1186 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1188 # No user value, uncomment the following line to provide one.
1189 # user_value "-fno-rtti -Woverloaded-virtual"
1190 # value_source default
1191 # Default value: "-fno-rtti -Woverloaded-virtual"
1194 # Suppressed compiler flags
1195 # This option modifies the set of compiler flags for
1196 # building the C library. These flags are removed from
1197 # the set of global flags if present.
1199 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1201 # No user value, uncomment the following line to provide one.
1202 # user_value -Wno-pointer-sign
1203 # value_source default
1204 # Default value: -Wno-pointer-sign
1207 # C library i18n function tests
1208 # This option specifies the set of tests for the C library
1211 cdl_option CYGPKG_LIBC_I18N_TESTS {
1212 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1214 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1219 # ISO C library general utility functions
1220 # doc: ref/libc.html
1221 # This package provides general utility functions in <stdlib.h>
1222 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1224 cdl_package CYGPKG_LIBC_STDLIB {
1225 # Packages cannot be added or removed, nor can their version be changed,
1226 # simply by editing their value. Instead the appropriate configuration
1227 # should be used to perform these actions.
1229 # This value cannot be modified here.
1231 # Current value: 1 current
1232 # Requires: CYGPKG_ISOINFRA
1233 # CYGPKG_ISOINFRA == current
1235 # Requires: CYGINT_ISO_CTYPE
1236 # CYGINT_ISO_CTYPE == 1
1238 # Requires: CYGINT_ISO_STRING_STRFUNCS
1239 # CYGINT_ISO_STRING_STRFUNCS == 1
1244 # Inline versions of <stdlib.h> functions
1245 # This option chooses whether some of the
1246 # particularly simple standard utility functions
1247 # from <stdlib.h> are available as inline
1248 # functions. This may improve performance, and as
1249 # the functions are small, may even improve code
1252 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1253 # There is no associated value.
1259 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1261 # No user value, uncomment the following line to provide one.
1263 # value_source default
1265 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1266 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1272 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1274 # No user value, uncomment the following line to provide one.
1276 # value_source default
1278 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1279 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1283 # atof() / atoi() / atol()
1285 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1287 # No user value, uncomment the following line to provide one.
1289 # value_source default
1291 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1292 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1297 # Random number generation
1298 # These options control the behaviour of the
1299 # functions rand(), srand() and rand_r()
1301 cdl_component CYGPKG_LIBC_RAND {
1302 # There is no associated value.
1306 # Per-thread random seed
1307 # doc: ref/libc-thread-safety.html
1308 # This option controls whether the pseudo-random
1309 # number generation functions rand() and srand()
1310 # have their state recorded on a per-thread
1311 # basis rather than global. If this option is
1312 # disabled, some per-thread space can be saved.
1313 # Note there is also a POSIX-standard rand_r()
1314 # function to achieve a similar effect with user
1315 # support. Enabling this option will use one slot
1316 # of kernel per-thread data. You should ensure you
1317 # have enough slots configured for all your
1320 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1322 # No user value, uncomment the following line to provide one.
1324 # value_source default
1326 # Requires: CYGVAR_KERNEL_THREADS_DATA
1327 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1331 # Random number seed
1332 # This selects the initial random number seed for
1333 # rand()'s pseudo-random number generator. For
1334 # strict ISO standard compliance, this should be 1,
1335 # as per section 7.10.2.2 of the standard.
1337 cdl_option CYGNUM_LIBC_RAND_SEED {
1339 # No user value, uncomment the following line to provide one.
1341 # value_source default
1343 # Legal values: 0 to 0x7fffffff
1347 # Trace verbosity level for debugging the rand(),
1348 # srand() and rand_r() functions. Increase this
1349 # value to get additional trace output.
1351 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1353 # No user value, uncomment the following line to provide one.
1355 # value_source default
1357 # Legal values: 0 to 1
1360 # Simplest implementation
1361 # This provides a very simple implementation of rand()
1362 # that does not perform well with randomness in the
1363 # lower significant bits. However it is exceptionally
1364 # fast. It uses the sample algorithm from the ISO C
1367 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1369 # No user value, uncomment the following line to provide one.
1371 # value_source default
1375 # Simple implementation #1
1376 # This provides a very simple implementation of rand()
1377 # based on the simplest implementation above. However
1378 # it does try to work around the lack of randomness
1379 # in the lower significant bits, at the expense of a
1382 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1389 # Knuth implementation #1
1390 # This implements a slightly more complex algorithm
1391 # published in Donald E. Knuth's Art of Computer
1392 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1393 # This produces better random numbers than the
1394 # simplest approach but is slower.
1396 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1405 # This option allows use of the utility function
1406 # strtod() (and consequently atof()) to convert
1407 # from string to double precision floating point
1408 # numbers. Disabling this option removes the
1409 # dependency on the math library package.
1411 cdl_option CYGFUN_LIBC_strtod {
1413 # No user value, uncomment the following line to provide one.
1415 # value_source default
1416 # Default value: 0 != CYGPKG_LIBM
1417 # CYGPKG_LIBM (unknown) == 0
1419 # Requires: CYGPKG_LIBM
1420 # CYGPKG_LIBM (unknown) == 0
1424 # Provides long long conversion functions
1425 # Enabling this option will provide support for the strtoll(),
1426 # strtoull() and atoll() conversion functions, which are
1427 # the long long variants of the standard versions of these
1428 # functions. Supporting this requires extra code and compile
1431 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1438 # bsearch() tracing level
1439 # Trace verbosity level for debugging the <stdlib.h>
1440 # binary search function bsearch(). Increase this
1441 # value to get additional trace output.
1443 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1445 # No user value, uncomment the following line to provide one.
1447 # value_source default
1449 # Legal values: 0 to 1
1452 # qsort() tracing level
1453 # Trace verbosity level for debugging the <stdlib.h>
1454 # quicksort function qsort(). Increase this value
1455 # to get additional trace output.
1457 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1459 # No user value, uncomment the following line to provide one.
1461 # value_source default
1463 # Legal values: 0 to 1
1466 # C library stdlib build options
1467 # Package specific build options including control over
1468 # compiler flags used only in building this package,
1469 # and details of which tests are built.
1471 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1472 # There is no associated value.
1476 # Additional compiler flags
1477 # This option modifies the set of compiler flags for
1478 # building this package. These flags are used in addition
1479 # to the set of global flags.
1481 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1483 # No user value, uncomment the following line to provide one.
1484 # user_value "-fno-rtti -Woverloaded-virtual"
1485 # value_source default
1486 # Default value: "-fno-rtti -Woverloaded-virtual"
1489 # Suppressed compiler flags
1490 # This option modifies the set of compiler flags for
1491 # building this package. These flags are removed from
1492 # the set of global flags if present.
1494 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1496 # No user value, uncomment the following line to provide one.
1497 # user_value -Wno-pointer-sign
1498 # value_source default
1499 # Default value: -Wno-pointer-sign
1502 # C library stdlib tests
1503 # This option specifies the set of tests for this package.
1505 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1506 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1508 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1515 # doc: ref/the-ecos-hardware-abstraction-layer.html
1516 # The eCos HAL package provide a porting layer for
1517 # higher-level parts of the system such as the kernel and the
1518 # C library. Each installation should have HAL packages for
1519 # one or more architectures, and for each architecture there
1520 # may be one or more supported platforms. It is necessary to
1521 # select one target architecture and one platform for that
1522 # architecture. There are also a number of configuration
1523 # options that are common to all HAL packages.
1525 cdl_package CYGPKG_HAL {
1526 # Packages cannot be added or removed, nor can their version be changed,
1527 # simply by editing their value. Instead the appropriate configuration
1528 # should be used to perform these actions.
1530 # This value cannot be modified here.
1532 # Current value: 1 current
1533 # Requires: CYGPKG_INFRA
1534 # CYGPKG_INFRA == current
1537 # The following properties are affected by this value
1541 # Platform-independent HAL options
1542 # A number of configuration options are common to most or all
1543 # HAL packages, for example options controlling how much state
1544 # should be saved during a context switch. The implementations
1545 # of these options will vary from architecture to architecture.
1547 cdl_component CYGPKG_HAL_COMMON {
1548 # There is no associated value.
1552 # Provide eCos kernel support
1553 # The HAL can be configured to either support the full eCos
1554 # kernel, or to support only very simple applications which do
1555 # not require a full kernel. If kernel support is not required
1556 # then some of the startup, exception, and interrupt handling
1557 # code can be eliminated.
1559 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1561 # No user value, uncomment the following line to provide one.
1563 # value_source default
1564 # Default value: CYGPKG_KERNEL
1565 # CYGPKG_KERNEL (unknown) == 0
1567 # Requires: CYGPKG_KERNEL
1568 # CYGPKG_KERNEL (unknown) == 0
1572 # HAL exception support
1573 # When a processor exception occurs, for example an attempt to
1574 # execute an illegal instruction or to perform a divide by
1575 # zero, this exception may be handled in a number of different
1576 # ways. If the target system has gdb support then typically
1577 # the exception will be handled by gdb code. Otherwise if the
1578 # HAL exception support is enabled then the HAL will invoke a
1579 # routine deliver_exception(). Typically this routine will be
1580 # provided by the eCos kernel, but it is possible for
1581 # application code to provide its own implementation. If the
1582 # HAL exception support is not enabled and a processor
1583 # exception occurs then the behaviour of the system is
1586 cdl_option CYGPKG_HAL_EXCEPTIONS {
1588 # No user value, uncomment the following line to provide one.
1590 # value_source default
1591 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1592 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1594 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1595 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1599 # Stop calling constructors early
1600 # This option supports environments where some constructors
1601 # must be run in the context of a thread rather than at
1602 # simple system startup time. A boolean flag named
1603 # cyg_hal_stop_constructors is set to 1 when constructors
1604 # should no longer be invoked. It is up to some other
1605 # package to deal with the rest of the constructors.
1606 # In the current version this is only possible with the
1609 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1611 # No user value, uncomment the following line to provide one.
1613 # value_source default
1615 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1616 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1620 # HAL uses the MMU and allows for CDL manipulation of it's use
1622 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1623 # No options implement this inferface
1624 # This value cannot be modified here.
1628 # The following properties are affected by this value
1629 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1630 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1633 # Install MMU tables.
1634 # This option controls whether this application installs
1635 # its own Memory Management Unit (MMU) tables, or relies on the
1636 # existing environment to run.
1638 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1639 # This option is not active
1640 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1641 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1645 # No user value, uncomment the following line to provide one.
1647 # value_source default
1648 # Default value: CYG_HAL_STARTUP != "RAM"
1649 # CYG_HAL_STARTUP == ROMRAM
1652 # The following properties are affected by this value
1653 # option CYGSEM_HAL_STATIC_MMU_TABLES
1654 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1657 # Use static MMU tables.
1658 # This option defines an environment where any Memory
1659 # Management Unit (MMU) tables are constant. Normally used by ROM
1660 # based environments, this provides a way to save RAM usage which
1661 # would otherwise be required for these tables.
1663 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1665 # No user value, uncomment the following line to provide one.
1667 # value_source default
1669 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1670 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1674 # Route diagnostic output to debug channel
1675 # If not inheriting the console setup from the ROM monitor,
1676 # it is possible to redirect diagnostic output to the debug
1677 # channel by enabling this option. Depending on the debugger
1678 # used it may also be necessary to select a mangler for the
1679 # output to be displayed by the debugger.
1681 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1682 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1683 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1685 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1686 # CYGPKG_HAL_ARM == current
1687 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1688 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1689 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1693 # No user value, uncomment the following line to provide one.
1695 # value_source default
1696 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1697 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1698 # CYG_HAL_STARTUP == ROMRAM
1701 # The following properties are affected by this value
1702 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1703 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1707 # Mangler used on diag output
1708 # It is sometimes necessary to mangle (encode) the
1709 # diag ASCII text output in order for it to show up at the
1710 # other end. In particular, GDB may silently ignore raw
1713 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1714 # This option is not active
1715 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1718 # No user value, uncomment the following line to provide one.
1720 # value_source default
1721 # Default value: GDB
1722 # Legal values: "GDB" "None"
1727 # HAL interrupt handling
1728 # A number of configuration options related to interrupt
1729 # handling are common to most or all HAL packages, even though
1730 # the implementations will vary from architecture to
1733 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1734 # There is no associated value.
1738 # Use separate stack for interrupts
1739 # When an interrupt occurs this interrupt can be handled either
1740 # on the current stack or on a separate stack maintained by the
1741 # HAL. Using a separate stack requires a small number of extra
1742 # instructions in the interrupt handling code, but it has the
1743 # advantage that it is no longer necessary to allow extra space
1744 # in every thread stack for the interrupt handlers. The amount
1745 # of extra space required depends on the interrupt handlers
1746 # that are being used.
1748 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1750 # No user value, uncomment the following line to provide one.
1752 # The inferred value should not be edited directly.
1754 # value_source inferred
1757 # The following properties are affected by this value
1758 # package CYGPKG_REDBOOT
1759 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1762 # Interrupt stack size
1763 # This configuration option specifies the stack size in bytes
1764 # for the interrupt stack. Typically this should be a multiple
1765 # of 16, but the exact requirements will vary from architecture
1766 # to architecture. The interrupt stack serves two separate
1767 # purposes. It is used as the stack during system
1768 # initialization. In addition, if the interrupt system is
1769 # configured to use a separate stack then all interrupts will
1770 # be processed on this stack. The exact memory requirements
1771 # will vary from application to application, and will depend
1772 # heavily on whether or not other interrupt-related options,
1773 # for example nested interrupts, are enabled. On most targets,
1774 # in a configuration with no kernel this stack will also be
1775 # the stack used to invoke the application, and must obviously
1776 # be appropriately large in that case.
1778 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1780 # No user value, uncomment the following line to provide one.
1782 # value_source default
1783 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1784 # CYGPKG_KERNEL (unknown) == 0
1786 # Legal values: 128 to 1048576
1789 # Allow nested interrupts
1790 # When an interrupt occurs the HAL interrupt handling code can
1791 # either leave interrupts disabled for the duration of the
1792 # interrupt handling code, or by doing some extra work it can
1793 # reenable interrupts before invoking the interrupt handler and
1794 # thus allow nested interrupts to happen. If all the interrupt
1795 # handlers being used are small and do not involve any loops
1796 # then it is usually better to disallow nested interrupts.
1797 # However if any of the interrupt handlers are more complicated
1798 # than nested interrupts will usually be required.
1800 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1802 # No user value, uncomment the following line to provide one.
1804 # value_source default
1808 # Save minimum context on interrupt
1809 # The HAL interrupt handling code can exploit the calling conventions
1810 # defined for a given architecture to reduce the amount of state
1811 # that has to be saved. Generally this improves performance and
1812 # reduces code size. However it can make source-level debugging
1815 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1817 # No user value, uncomment the following line to provide one.
1819 # The inferred value should not be edited directly.
1821 # value_source inferred
1824 # The following properties are affected by this value
1825 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1826 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1827 # component CYGBLD_BUILD_REDBOOT
1828 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1831 # Chain all interrupts together
1832 # Interrupts can be attached to vectors either singly, or be
1833 # chained together. The latter is necessary if there is no way
1834 # of discovering which device has interrupted without
1835 # inspecting the device itself. It can also reduce the amount
1836 # of RAM needed for interrupt decoding tables and code.
1838 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1840 # No user value, uncomment the following line to provide one.
1842 # value_source default
1846 # Ignore spurious [fleeting] interrupts
1847 # On some hardware, interrupt sources may not be de-bounced or
1848 # de-glitched. Rather than try to handle these interrupts (no
1849 # handling may be possible), this option allows the HAL to simply
1850 # ignore them. In most cases, if the interrupt is real it will
1851 # reoccur in a detectable form.
1853 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1855 # No user value, uncomment the following line to provide one.
1857 # value_source default
1862 # HAL context switch support
1863 # A number of configuration options related to thread contexts
1864 # are common to most or all HAL packages, even though the
1865 # implementations will vary from architecture to architecture.
1867 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1868 # There is no associated value.
1870 # The following properties are affected by this value
1874 # Use minimum thread context
1875 # The thread context switch code can exploit the calling
1876 # conventions defined for a given architecture to reduce the
1877 # amount of state that has to be saved during a context
1878 # switch. Generally this improves performance and reduces
1879 # code size. However it can make source-level debugging more
1882 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1884 # No user value, uncomment the following line to provide one.
1886 # The inferred value should not be edited directly.
1888 # value_source inferred
1891 # The following properties are affected by this value
1892 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1893 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1894 # component CYGBLD_BUILD_REDBOOT
1895 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1899 # Explicit control over cache behaviour
1900 # These options let the default behaviour of the caches
1901 # be easily configurable.
1903 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1904 # There is no associated value.
1908 # Enable DATA cache on startup
1909 # Enabling this option will cause the data cache to be enabled
1910 # as soon as practicable when eCos starts up. One would choose
1911 # to disable this if the data cache cannot safely be turned on,
1912 # such as a case where the cache(s) require additional platform
1915 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1917 # No user value, uncomment the following line to provide one.
1919 # value_source default
1924 # DATA cache mode on startup
1925 # This option controls the mode the cache will be set to
1926 # when enabled on startup.
1928 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1930 # No user value, uncomment the following line to provide one.
1931 # user_value COPYBACK
1932 # value_source default
1933 # Default value: COPYBACK
1934 # Legal values: "COPYBACK" "WRITETHRU"
1938 # Enable INSTRUCTION cache on startup
1939 # Enabling this option will cause the instruction cache to be enabled
1940 # as soon as practicable when eCos starts up. One would choose
1941 # to disable this if the instruction cache cannot safely be turned on,
1942 # such as a case where the cache(s) require additional platform
1945 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1947 # No user value, uncomment the following line to provide one.
1949 # value_source default
1954 # Source-level debugging support
1955 # If the source level debugger gdb is to be used for debugging
1956 # application code then it may be necessary to configure in support
1957 # for this in the HAL.
1959 cdl_component CYGPKG_HAL_DEBUG {
1960 # There is no associated value.
1964 # Support for GDB stubs
1965 # The HAL implements GDB stubs for the target.
1967 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1968 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
1969 # This value cannot be modified here.
1973 # The following properties are affected by this value
1974 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1975 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1976 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1977 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1980 # Include GDB stubs in HAL
1981 # This option causes a set of GDB stubs to be included into the
1982 # system. On some target systems the GDB support will be
1983 # provided by other means, for example by a ROM monitor. On
1984 # other targets, especially when building a ROM-booting system,
1985 # the necessary support has to go into the target library
1986 # itself. When GDB stubs are include in a configuration, HAL
1987 # serial drivers must also be included.
1989 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1990 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1991 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1995 # No user value, uncomment the following line to provide one.
1997 # The inferred value should not be edited directly.
1999 # value_source inferred
2001 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2002 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2004 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2005 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2007 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2008 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2010 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2011 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2015 # The following properties are affected by this value
2016 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2017 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2018 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2020 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2021 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2022 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2023 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2024 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2025 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2026 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2027 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2028 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2029 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2030 # option CYGPKG_HAL_GDB_FILEIO
2031 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2032 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2033 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2034 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2035 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2036 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2037 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2040 # Support for external break support in GDB stubs
2041 # The HAL implements external break (or asynchronous interrupt)
2042 # in the GDB stubs for the target.
2044 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2045 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2046 # This value cannot be modified here.
2050 # The following properties are affected by this value
2051 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2052 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2055 # Include GDB external break support for stubs
2056 # This option causes the GDB stub to add a serial interrupt handler
2057 # which will listen for GDB break packets. This lets you stop the
2058 # target asynchronously when using GDB, usually by hitting Control+C
2059 # or pressing the STOP button. This option differs from
2060 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2061 # GDB stubs are present.
2063 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2064 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2065 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2069 # No user value, uncomment the following line to provide one.
2071 # value_source default
2072 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2073 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2075 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2076 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2079 # The following properties are affected by this value
2080 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2081 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2082 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2083 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2084 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2085 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2088 # Platform does not support CTRLC
2090 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2091 # No options implement this inferface
2092 # This value cannot be modified here.
2096 # The following properties are affected by this value
2097 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2098 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2101 # Include GDB external break support when no stubs
2102 # This option adds an interrupt handler for the GDB serial line
2103 # which will listen for GDB break packets. This lets you stop the
2104 # target asynchronously when using GDB, usually by hitting Control+C
2105 # or pressing the STOP button. This option differs from
2106 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2107 # stubs are NOT present.
2109 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2110 # This option is not active
2111 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2112 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2113 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2115 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2116 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2120 # No user value, uncomment the following line to provide one.
2122 # value_source default
2123 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2124 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2126 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2127 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2130 # The following properties are affected by this value
2131 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2132 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2133 # component CYGBLD_BUILD_REDBOOT
2134 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2137 # Include GDB multi-threading debug support
2138 # This option enables some extra HAL code which is needed
2139 # to support multi-threaded source level debugging.
2141 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2142 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2143 # CYGSEM_HAL_ROM_MONITOR == 1
2144 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2148 # No user value, uncomment the following line to provide one.
2150 # value_source default
2153 # The following properties are affected by this value
2154 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2155 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2156 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2157 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2160 # Number of times to retry sending a $O packet
2161 # This option controls the number of attempts that eCos programs
2162 # will make to send a $O packet to a host GDB process. If it is
2163 # set non-zero, then the target process will attempt to resend the
2164 # $O packet data up to this number of retries. Caution: use of
2165 # this option is not recommended as it can thoroughly confuse the
2168 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2170 # No user value, uncomment the following line to provide one.
2172 # value_source default
2176 # Timeout period for GDB packets
2177 # This option controls the time (in milliseconds) that eCos programs
2178 # will wait for a response when sending packets to a host GDB process.
2179 # If this time elapses, then the packet will be resent, up to some
2180 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2182 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2184 # No user value, uncomment the following line to provide one.
2186 # value_source default
2187 # Default value: 500
2190 # Location of CRC32 table
2191 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2192 # and placed in ROM, or generated at runtime in RAM. Depending on
2193 # your memory constraints, one of these options may be better.
2195 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2197 # No user value, uncomment the following line to provide one.
2199 # value_source default
2200 # Default value: RAM
2201 # Legal values: "ROM" "RAM"
2205 # ROM monitor support
2206 # Support for ROM monitors can be built in to your application.
2207 # It may also be relevant to build your application as a ROM monitor
2208 # itself. Such options are contained here if relevant for your chosen
2209 # platform. The options and ROM monitors available to choose are
2210 # platform-dependent.
2212 cdl_component CYGPKG_HAL_ROM_MONITOR {
2213 # There is no associated value.
2215 # The following properties are affected by this value
2219 # Target has virtual vector support
2221 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2222 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2223 # This value cannot be modified here.
2227 # The following properties are affected by this value
2228 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2229 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2232 # Target supports baud rate control via vectors
2233 # Whether this target supports the __COMMCTL_GETBAUD
2234 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2236 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2237 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2238 # This value cannot be modified here.
2242 # The following properties are affected by this value
2243 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2244 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2247 # Enable use of virtual vector calling interface
2248 # Virtual vector support allows the HAL to let the ROM
2249 # monitor handle certain operations. The virtual vector table
2250 # defines a calling interface between applications running in
2251 # RAM and the ROM monitor.
2253 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2254 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2255 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2258 # Calculated value: 1
2262 # The following properties are affected by this value
2263 # component CYGBLD_BUILD_REDBOOT
2264 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2265 # package CYGPKG_DEVS_ETH_PHY
2266 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2270 # Inherit console settings from ROM monitor
2271 # When this option is set, the application will inherit
2272 # the console as set up by the ROM monitor. This means
2273 # that the application will use whatever channel and
2274 # mangling style was used by the ROM monitor when
2275 # the application was launched.
2277 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2278 # This option is not active
2279 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2280 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2284 # No user value, uncomment the following line to provide one.
2286 # value_source default
2287 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2288 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2291 # The following properties are affected by this value
2292 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2293 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2294 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2295 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2298 # Debug channel is configurable
2299 # This option is a configuration hint - it is enabled
2300 # when the HAL initialization code will make use
2301 # of the debug channel configuration option.
2303 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2304 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2305 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2309 # The following properties are affected by this value
2310 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2311 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2314 # Console channel is configurable
2315 # This option is a configuration hint - it is enabled
2316 # when the HAL initialization code will make use
2317 # of the console channel configuration option.
2319 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2320 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2321 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2322 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2326 # The following properties are affected by this value
2327 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2328 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2331 # Initialize whole of virtual vector table
2332 # This option will cause the whole of the virtual
2333 # vector table to be initialized with dummy values on
2334 # startup. When this option is enabled, all the
2335 # options below must also be enabled - or the
2336 # table would be empty when the application
2338 # On targets where older ROM monitors without
2339 # virtual vector support may still be in use, it is
2340 # necessary for RAM applictions to initialize the
2341 # table (since all HAL diagnostics and debug IO
2342 # happens via the table).
2344 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2346 # No user value, uncomment the following line to provide one.
2348 # value_source default
2349 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2350 # CYG_HAL_STARTUP == ROMRAM
2351 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2353 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2354 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2356 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2357 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2359 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2360 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2362 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2363 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2365 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2366 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2369 # The following properties are affected by this value
2370 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2371 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2372 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2373 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2374 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2375 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2376 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2377 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2378 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2379 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2380 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2381 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2382 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2383 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2386 # Claim virtual vector table entries by default
2387 # By default most virtual vectors will be claimed by
2388 # RAM startup configurations, meaning that the RAM
2389 # application will provide the services. The
2390 # exception is COMMS support (HAL
2391 # diagnostics/debugging IO) which is left in the
2392 # control of the ROM monitor.
2393 # The reasoning behind this is to get as much of the
2394 # code exercised during regular development so it
2395 # is known to be working the few times a new ROM
2396 # monitor or a ROM production configuration is used
2397 # - COMMS are excluded only by necessity in order to
2398 # avoid breaking an existing debugger connections
2399 # (there may be ways around this).
2400 # For production RAM configurations this option can
2401 # be switched off, causing the appliction to rely on
2402 # the ROM monitor for these services, thus
2403 # saving some space.
2404 # Individual vectors may also be left unclaimed,
2405 # controlled by the below options (meaning that the
2406 # associated service provided by the ROM monitor
2409 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2410 # This option is not active
2411 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2412 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2416 # No user value, uncomment the following line to provide one.
2418 # value_source default
2421 # The following properties are affected by this value
2422 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2423 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2424 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2425 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2426 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2427 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2428 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2429 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2432 # Claim reset virtual vectors
2433 # This option will cause the reset and kill_by_reset
2434 # virtual vectors to be claimed.
2436 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2438 # No user value, uncomment the following line to provide one.
2440 # value_source default
2441 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2442 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2446 # The following properties are affected by this value
2447 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2448 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2451 # Claim version virtual vectors
2452 # This option will cause the version
2453 # virtual vectors to be claimed.
2455 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2457 # No user value, uncomment the following line to provide one.
2459 # value_source default
2460 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2461 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2465 # Claim delay_us virtual vector
2466 # This option will cause the delay_us
2467 # virtual vector to be claimed.
2469 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2471 # No user value, uncomment the following line to provide one.
2473 # value_source default
2474 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2475 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2479 # The following properties are affected by this value
2480 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2481 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2484 # Claim cache virtual vectors
2485 # This option will cause the cache virtual vectors
2488 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2490 # No user value, uncomment the following line to provide one.
2492 # value_source default
2493 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2494 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2498 # The following properties are affected by this value
2499 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2500 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2503 # Claim data virtual vectors
2504 # This option will cause the data virtual vectors
2505 # to be claimed. At present there is only one, used
2506 # by the RedBoot ethernet driver to share diag output.
2508 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2510 # No user value, uncomment the following line to provide one.
2512 # value_source default
2513 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2514 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2518 # The following properties are affected by this value
2519 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2520 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2523 # Claim comms virtual vectors
2524 # This option will cause the communication tables
2525 # that are part of the virtual vectors mechanism to
2526 # be claimed. Note that doing this may cause an
2527 # existing ROM monitor communication connection to
2528 # be closed. For this reason, the option is disabled
2529 # per default for normal application
2532 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2534 # No user value, uncomment the following line to provide one.
2536 # value_source default
2537 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2538 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2539 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2542 # The following properties are affected by this value
2543 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2544 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2545 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2546 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2547 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2548 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2549 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2550 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2553 # Do diagnostic IO via virtual vector table
2554 # All HAL IO happens via the virtual vector table / comm
2555 # tables when those tables are supported by the HAL.
2556 # If so desired, the low-level IO functions can
2557 # still be provided by the RAM application by
2558 # enabling the CLAIM_COMMS option.
2560 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2561 # Calculated value: 1
2565 # The following properties are affected by this value
2566 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2567 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2568 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2569 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2573 # Behave as a ROM monitor
2574 # Enable this option if this program is to be used as a ROM monitor,
2575 # i.e. applications will be loaded into RAM on the TX53 module, and this
2576 # ROM monitor may process exceptions or interrupts generated from the
2577 # application. This enables features such as utilizing a separate
2578 # interrupt stack when exceptions are generated.
2580 cdl_option CYGSEM_HAL_ROM_MONITOR {
2582 # No user value, uncomment the following line to provide one.
2584 # The inferred value should not be edited directly.
2586 # value_source inferred
2588 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2589 # CYG_HAL_STARTUP == ROMRAM
2590 # CYG_HAL_STARTUP == ROMRAM
2593 # The following properties are affected by this value
2594 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2595 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2596 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2597 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2598 # option CYGPRI_REDBOOT_ROM_MONITOR
2599 # Requires: CYGSEM_HAL_ROM_MONITOR
2602 # Work with a ROM monitor
2603 # Support can be enabled for different varieties of ROM monitor.
2604 # This support changes various eCos semantics such as the encoding
2605 # of diagnostic output, or the overriding of hardware interrupt
2607 # Firstly there is "Generic" support which prevents the HAL
2608 # from overriding the hardware vectors that it does not use, to
2609 # instead allow an installed ROM monitor to handle them. This is
2610 # the most basic support which is likely to be common to most
2611 # implementations of ROM monitor.
2612 # "GDB_stubs" provides support when GDB stubs are included in
2613 # the ROM monitor or boot ROM.
2615 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2617 # No user value, uncomment the following line to provide one.
2619 # value_source default
2620 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2621 # CYG_HAL_STARTUP == ROMRAM
2623 # Legal values: "Generic" "GDB_stubs"
2624 # Requires: CYG_HAL_STARTUP == "RAM"
2625 # CYG_HAL_STARTUP == ROMRAM
2628 # The following properties are affected by this value
2629 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2630 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2631 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2632 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2633 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2634 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2635 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2636 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2640 # Platform defined I/O channels.
2641 # Platforms which provide additional I/O channels can implement
2642 # this interface, indicating that the function plf_if_init()
2643 # needs to be called.
2645 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2646 # No options implement this inferface
2647 # This value cannot be modified here.
2652 # Platform IDE I/O support.
2653 # Platforms which provide IDE controllers can implement
2654 # this interface, indicating that IDE I/O macros are
2657 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2658 # No options implement this inferface
2659 # This value cannot be modified here.
2663 # The following properties are affected by this value
2664 # component CYGSEM_REDBOOT_DISK_IDE
2665 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2668 # File I/O operations via GDB
2669 # This option enables support for various file I/O
2670 # operations using the GDB remote protocol to communicate
2671 # with GDB. The operations are then performed on the
2672 # debugging host by proxy. These operations are only
2673 # currently available by using a system call interface
2674 # to RedBoot. This may change in the future.
2676 cdl_option CYGPKG_HAL_GDB_FILEIO {
2677 # This option is not active
2678 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2679 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2683 # No user value, uncomment the following line to provide one.
2685 # value_source default
2687 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2688 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2692 # Build Compiler sanity checking tests
2693 # Enabling this option causes compiler tests to be built.
2695 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2697 # No user value, uncomment the following line to provide one.
2699 # value_source default
2702 # The following properties are affected by this value
2703 # component CYGPKG_HAL_TESTS
2704 # Calculated: "tests/context tests/basic"
2705 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2706 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2707 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2711 # This option specifies the set of tests for the common HAL.
2713 cdl_component CYGPKG_HAL_TESTS {
2714 # Calculated value: "tests/context tests/basic"
2715 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2716 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2717 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2718 # CYGINT_HAL_TESTS_NO_CACHES == 0
2719 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2720 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2722 # Current_value: tests/context tests/basic tests/cache tests/intr
2726 # Interface for cache presence
2727 # Some architectures and/or platforms do not have caches. By
2728 # implementing this interface, these can disable the various
2729 # cache-related tests.
2731 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2732 # No options implement this inferface
2733 # This value cannot be modified here.
2735 # Current value: 0 0
2737 # The following properties are affected by this value
2738 # component CYGPKG_HAL_TESTS
2739 # Calculated: "tests/context tests/basic"
2740 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2741 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2742 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2747 # The ARM architecture HAL package provides generic
2748 # support for this processor architecture. It is also
2749 # necessary to select a specific target platform HAL
2752 cdl_package CYGPKG_HAL_ARM {
2753 # Packages cannot be added or removed, nor can their version be changed,
2754 # simply by editing their value. Instead the appropriate configuration
2755 # should be used to perform these actions.
2757 # This value cannot be modified here.
2759 # Current value: 1 current
2761 # The following properties are affected by this value
2762 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2763 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2764 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2765 # ActiveIf: CYGPKG_HAL_ARM
2769 # The CPU architecture supports THUMB mode
2771 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2772 # No options implement this inferface
2773 # This value cannot be modified here.
2777 # The following properties are affected by this value
2778 # option CYGHWR_THUMB
2779 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2780 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2781 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2784 # Enable Thumb instruction set
2785 # Enable use of the Thumb instruction set.
2787 cdl_option CYGHWR_THUMB {
2788 # This option is not active
2789 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2790 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2794 # No user value, uncomment the following line to provide one.
2796 # value_source default
2799 # The following properties are affected by this value
2800 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2801 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2804 # Enable Thumb interworking compiler option
2805 # This option controls the use of -mthumb-interwork in the
2806 # compiler flags. It defaults enabled in Thumb or ROM monitor
2807 # configurations, but can be overridden for reduced memory
2808 # footprint where interworking is not a requirement.
2810 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2811 # This option is not active
2812 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2813 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2817 # No user value, uncomment the following line to provide one.
2819 # value_source default
2820 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2822 # CYGSEM_HAL_ROM_MONITOR == 1
2826 # The platform and architecture supports Big Endian operation
2828 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2829 # No options implement this inferface
2830 # This value cannot be modified here.
2834 # The following properties are affected by this value
2835 # option CYGHWR_HAL_ARM_BIGENDIAN
2836 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2839 # Use big-endian mode
2840 # Use the CPU in big-endian mode.
2842 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2843 # This option is not active
2844 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2845 # CYGINT_HAL_ARM_BIGENDIAN == 0
2849 # No user value, uncomment the following line to provide one.
2851 # value_source default
2855 # The platform uses a processor with an ARM7 core
2857 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2858 # No options implement this inferface
2859 # This value cannot be modified here.
2863 # The following properties are affected by this value
2864 # option CYGHWR_HAL_ARM_CPU_FAMILY
2865 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2866 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2867 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2868 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2870 # option CYGHWR_HAL_ARM_CPU_FAMILY
2871 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2872 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2873 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2874 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2878 # The platform uses a processor with an ARM9 core
2880 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2881 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2882 # This value cannot be modified here.
2886 # The following properties are affected by this value
2887 # option CYGHWR_HAL_ARM_CPU_FAMILY
2888 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2889 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2890 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2891 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2901 # The platform uses a processor with a StrongARM core
2903 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2904 # No options implement this inferface
2905 # This value cannot be modified here.
2909 # The following properties are affected by this value
2910 # option CYGHWR_HAL_ARM_CPU_FAMILY
2911 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2912 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2913 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2914 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2924 # The platform uses a processor with a XScale core
2926 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2927 # No options implement this inferface
2928 # This value cannot be modified here.
2932 # The following properties are affected by this value
2933 # option CYGHWR_HAL_ARM_CPU_FAMILY
2934 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2935 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2936 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2937 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2939 # option CYGHWR_HAL_ARM_CPU_FAMILY
2940 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2948 # It is possible to optimize code for different
2949 # ARM CPU families. This option selects which CPU to
2950 # optimize for on boards that support multiple CPU types.
2952 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2954 # No user value, uncomment the following line to provide one.
2956 # value_source default
2957 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2958 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2959 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2960 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2962 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2963 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2964 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2965 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2967 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2968 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2969 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2970 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2972 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2973 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2974 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2975 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2978 # Provide diagnostic dump for exceptions
2979 # Print messages about hardware exceptions, including
2980 # raw exception frame dump and register contents.
2982 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2984 # No user value, uncomment the following line to provide one.
2986 # value_source default
2988 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2989 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2993 # Process all exceptions with the eCos application
2994 # Normal RAM-based programs which do not include GDB stubs
2995 # defer processing of the illegal instruction exception to GDB.
2996 # Setting this options allows the program to explicitly handle
2997 # the illegal instruction exception itself. Note: this will
2998 # prevent the use of GDB to debug the application as breakpoints
2999 # will no longer work.
3001 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3003 # No user value, uncomment the following line to provide one.
3005 # value_source default
3009 # Support GDB thread operations via ICE/Multi-ICE
3010 # Allow GDB to get thread information via the ICE/Multi-ICE
3013 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3015 # No user value, uncomment the following line to provide one.
3017 # value_source default
3019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3020 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3022 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3023 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3025 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3026 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3030 # Support for 'gprof' callbacks
3031 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3032 # to acquire the interrupt-context PC and SP, when this option is
3035 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3036 # This option is not active
3037 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3038 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3040 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3041 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3042 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3045 # Calculated value: 1
3050 # Accept exceptions and irq's occurring in user mode
3051 # For standalone Redboot based programs running in user mode.
3053 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3055 # No user value, uncomment the following line to provide one.
3057 # value_source default
3061 # Preserve svc spsr before returning to svc mode
3062 # This option secures exception and breakpoint processing
3063 # triggered during execution of application specific SWI
3066 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3068 # No user value, uncomment the following line to provide one.
3070 # value_source default
3076 cdl_option CYGBLD_LINKER_SCRIPT {
3077 # Calculated value: "src/arm.ld"
3079 # Current_value: src/arm.ld
3082 # Implementations of hal_arm_mem_real_region_top()
3084 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3085 # No options implement this inferface
3086 # This value cannot be modified here.
3091 # Freescale SoC architecture
3092 # This HAL variant package provides generic
3093 # support for the Freescale SoC. It is also
3094 # necessary to select a specific target platform HAL
3097 cdl_package CYGPKG_HAL_ARM_MX53 {
3098 # Packages cannot be added or removed, nor can their version be changed,
3099 # simply by editing their value. Instead the appropriate configuration
3100 # should be used to perform these actions.
3102 # This value cannot be modified here.
3104 # Current value: 1 current
3106 # The following properties are affected by this value
3107 # option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK
3108 # ActiveIf: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
3109 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
3110 # ActiveIf: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
3111 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
3115 # Processor clock rate
3116 # The processor can run at various frequencies.
3117 # These values are expressed in KHz. Note that there are
3118 # several steppings of the rate to run at different
3119 # maximum frequencies. Check the specs to make sure that your
3120 # particular processor can run at the rate you select here.
3122 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3123 # This option is not active
3124 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3125 # CYG_HAL_STARTUP == ROMRAM
3129 # No user value, uncomment the following line to provide one.
3131 # value_source default
3132 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3133 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3134 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3135 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3137 # Legal values: 150000 200000
3140 # Real-time clock constants
3142 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3143 # There is no associated value.
3147 # Real-time clock numerator
3149 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3150 # Calculated value: 1000000000
3152 # Current_value: 1000000000
3155 # Real-time clock denominator
3156 # This option selects the heartbeat rate for the real-time clock.
3157 # The rate is specified in ticks per second. Change this value
3158 # with caution - too high and your system will become saturated
3159 # just handling clock interrupts, too low and some operations
3160 # such as thread scheduling may become sluggish.
3162 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3164 # No user value, uncomment the following line to provide one.
3166 # value_source default
3167 # Default value: 100
3169 # The following properties are affected by this value
3170 # option CYGNUM_HAL_RTC_PERIOD
3171 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3174 # Real-time clock period
3176 cdl_option CYGNUM_HAL_RTC_PERIOD {
3177 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3178 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3180 # Current_value: 36864
3184 # UART1 available as diagnostic/debug channel
3185 # The chip has multiple serial channels which may be
3186 # used for different things on different platforms. This
3187 # interface allows a platform to indicate that the specified
3188 # serial port can be used as a diagnostic and/or debug channel.
3190 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3191 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3192 # This value cannot be modified here.
3196 # The following properties are affected by this value
3199 # UART2 available as diagnostic/debug channel
3200 # The chip has multiple serial channels which may be
3201 # used for different things on different platforms. This
3202 # interface allows a platform to indicate that the specified
3203 # serial port can be used as a diagnostic and/or debug channel.
3205 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3206 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3207 # This value cannot be modified here.
3211 # The following properties are affected by this value
3214 # UART3 available as diagnostic/debug channel
3215 # The chip has multiple serial channels which may be
3216 # used for different things on different platforms. This
3217 # interface allows a platform to indicate that the specified
3218 # serial port can be used as a diagnostic and/or debug channel.
3220 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3221 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3222 # This value cannot be modified here.
3226 # The following properties are affected by this value
3229 # UART4 available as diagnostic/debug channel
3230 # The chip has multiple serial channels which may be
3231 # used for different things on different platforms. This
3232 # interface allows a platform to indicate that the specified
3233 # serial port can be used as a diagnostic and/or debug channel.
3235 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3236 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3237 # This value cannot be modified here.
3241 # The following properties are affected by this value
3244 # UART5 available as diagnostic/debug channel
3245 # The chip has multiple serial channels which may be
3246 # used for different things on different platforms. This
3247 # interface allows a platform to indicate that the specified
3248 # serial port can be used as a diagnostic and/or debug channel.
3250 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3251 # No options implement this inferface
3252 # This value cannot be modified here.
3258 # This HAL platform package provides generic
3259 # support for the Ka-Ro electronics TX53 module.
3261 cdl_package CYGPKG_HAL_ARM_TX53KARO {
3262 # Packages cannot be added or removed, nor can their version be changed,
3263 # simply by editing their value. Instead the appropriate configuration
3264 # should be used to perform these actions.
3266 # This value cannot be modified here.
3268 # Current value: 1 current
3269 # Requires: CYGINT_ISO_CTYPE
3270 # CYGINT_ISO_CTYPE == 1
3272 # Requires: CYGBLD_BUILD_REDBOOT == 1
3273 # CYGBLD_BUILD_REDBOOT == 1
3279 # The only startup type allowed is ROMRAM, since this will allow
3280 # the program to exist in ROM, but be copied to RAM during startup
3281 # which is required to boot from NAND flash.
3283 cdl_component CYG_HAL_STARTUP {
3285 # No user value, uncomment the following line to provide one.
3287 # value_source default
3288 # Default value: ROMRAM
3289 # Legal values: "ROMRAM" "RAM"
3291 # The following properties are affected by this value
3292 # option CYGSEM_HAL_ROM_MONITOR
3293 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3294 # option CYGSEM_HAL_ROM_MONITOR
3295 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3296 # option CYGSEM_HAL_USE_ROM_MONITOR
3297 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3298 # option CYGSEM_HAL_USE_ROM_MONITOR
3299 # Requires: CYG_HAL_STARTUP == "RAM"
3300 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3301 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3302 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3303 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3304 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3305 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3306 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3307 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3308 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3309 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3310 # option CYGPRI_REDBOOT_ROM_MONITOR
3311 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3312 # option CYGPRI_REDBOOT_ROM_MONITOR
3313 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3316 # Diagnostic serial port baud rate
3317 # This option selects the baud rate used for the console port.
3318 # Note: this should match the value chosen for the GDB port if the
3319 # console and GDB port are the same.
3321 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3323 # No user value, uncomment the following line to provide one.
3325 # value_source default
3326 # Default value: 115200
3327 # Legal values: 9600 19200 38400 57600 115200
3330 # GDB serial port baud rate
3331 # This option selects the baud rate used for the GDB port.
3332 # Note: this should match the value chosen for the console port if the
3333 # console and GDB port are the same.
3335 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3337 # No user value, uncomment the following line to provide one.
3339 # value_source default
3340 # Default value: 115200
3341 # Legal values: 9600 19200 38400 57600 115200
3344 # Number of communication channels on the TX53
3346 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3347 # Calculated value: 5
3351 # The following properties are affected by this value
3352 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3353 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3354 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3355 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3356 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3357 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3361 # The TX53 provides access to five serial ports. This option
3362 # chooses which port will be used to connect to a host
3365 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3366 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3367 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3371 # No user value, uncomment the following line to provide one.
3373 # value_source default
3375 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3376 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3379 # Default console channel.
3381 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3382 # Calculated value: 0
3385 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3386 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3388 # The following properties are affected by this value
3389 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3390 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3393 # Console serial port
3394 # The TX53 provides access to three serial ports. This option
3395 # chooses which port will be used for console output.
3397 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3398 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3399 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3403 # No user value, uncomment the following line to provide one.
3405 # value_source default
3406 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3407 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3409 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3410 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3413 # Ka-Ro electronics TX53 module build options
3414 # Package specific build options including control over
3415 # compiler flags used only in building this package,
3416 # and details of which tests are built.
3418 cdl_component CYGPKG_HAL_ARM_TX53_OPTIONS {
3419 # There is no associated value.
3420 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3421 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3427 # This option specifies the SDRAM type of the TX53 module.
3428 # Valid options are '2' for DDR2 and '3' for DDR3.
3430 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_TYPE {
3432 # No user value, uncomment the following line to provide one.
3434 # value_source default
3438 # The following properties are affected by this value
3439 # component CYGHWR_HAL_ARM_TX53_DDR2_OPTIONS
3440 # ActiveIf: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3441 # component CYGHWR_HAL_ARM_TX53_DDR3_OPTIONS
3442 # ActiveIf: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 3
3446 # This option specifies the SDRAM size of the TX53 module.
3448 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_SIZE {
3450 user_value 0x40000000
3452 # Default value: 0x20000000
3453 # Legal values: 0x40000000 0x20000000
3457 # This option specifies the CPU clock in MHz of the TX51 module.
3459 cdl_option CYGNUM_HAL_ARM_TX53_CPU_CLK {
3461 # No user value, uncomment the following line to provide one.
3463 # value_source default
3464 # Default value: 1000
3465 # Legal values: 800 1000
3468 # Enable low level debugging with LED
3469 # This option enables low level debugging by blink codes
3470 # of the LED on STK5.
3472 cdl_option CYGOPT_HAL_ARM_TX53_DEBUG {
3474 # No user value, uncomment the following line to provide one.
3476 # value_source default
3477 # Default value: false
3478 # false (unknown) == 0
3482 # Additional compiler flags
3483 # This option modifies the set of compiler flags for
3484 # building the TX53 HAL. These flags are used in addition
3485 # to the set of global flags.
3487 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_ADD {
3489 # No user value, uncomment the following line to provide one.
3491 # value_source default
3495 # Suppressed compiler flags
3496 # This option modifies the set of compiler flags for
3497 # building the TX53 HAL. These flags are removed from
3498 # the set of global flags if present.
3500 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_REMOVE {
3502 # No user value, uncomment the following line to provide one.
3504 # value_source default
3508 # Show a splash screen from the FIS partition: 'logo'
3509 # When this option is enabled, RedBoot will look for a flash partition
3510 # named 'logo' and display the contents of this partition as initial
3513 cdl_option CYGHWR_MX53_LCD_LOGO {
3514 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3515 # CYGPKG_DEVS_IMX_IPU == current
3519 # No user value, uncomment the following line to provide one.
3521 # value_source default
3526 # Options for DDR2 SDRAM
3528 cdl_component CYGHWR_HAL_ARM_TX53_DDR2_OPTIONS {
3529 # ActiveIf constraint: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3530 # CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3533 # There is no associated value.
3538 # This option specifies the SDRAM clock im MHz of the TX53 module.
3540 cdl_option CYGNUM_HAL_ARM_TX53_DDR2_CLK {
3542 # No user value, uncomment the following line to provide one.
3544 # value_source default
3545 # Default value: 400
3546 # Legal values: 216 266 333 400
3550 # Options for DDR3 SDRAM
3552 cdl_component CYGHWR_HAL_ARM_TX53_DDR3_OPTIONS {
3553 # This option is not active
3554 # ActiveIf constraint: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 3
3555 # CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3558 # There is no associated value.
3563 # This option specifies the SDRAM clock im MHz of the TX53 module.
3565 cdl_option CYGNUM_HAL_ARM_TX53_DDR3_CLK {
3566 # This option is not active
3567 # The parent CYGHWR_HAL_ARM_TX53_DDR3_OPTIONS is not active
3570 # No user value, uncomment the following line to provide one.
3572 # value_source default
3573 # Default value: 333
3580 cdl_component CYGHWR_MEMORY_LAYOUT {
3581 # Calculated value: "arm_tx53_romram"
3583 # Current_value: arm_tx53_romram
3587 # Memory layout linker script fragment
3589 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3590 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.ldi>"
3592 # Current_value: <pkgconf/mlt_arm_tx53_romram.ldi>
3595 # Memory layout header file
3597 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3598 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.h>"
3600 # Current_value: <pkgconf/mlt_arm_tx53_romram.h>
3609 # Common types and useful macros.
3610 # Tracing and assertion facilities.
3611 # Package startup options.
3613 cdl_package CYGPKG_INFRA {
3614 # Packages cannot be added or removed, nor can their version be changed,
3615 # simply by editing their value. Instead the appropriate configuration
3616 # should be used to perform these actions.
3618 # This value cannot be modified here.
3620 # Current value: 1 current
3622 # The following properties are affected by this value
3623 # package CYGPKG_HAL
3624 # Requires: CYGPKG_INFRA
3625 # component CYGBLD_BUILD_REDBOOT
3626 # Requires: CYGPKG_INFRA
3631 # The eCos source code contains a significant amount of
3632 # internal debugging support, in the form of assertions and
3634 # Assertions check at runtime that various conditions are as
3635 # expected; if not, execution is halted.
3636 # Tracing takes the form of text messages that are output
3637 # whenever certain events occur, or whenever functions are
3639 # The most important property of these checks and messages is
3640 # that they are not required for the program to run.
3641 # It is prudent to develop software with assertions enabled,
3642 # but disable them when making a product release, thus
3643 # removing the overhead of that checking.
3644 # It is possible to enable assertions and tracing
3646 # There are also options controlling the exact behaviour of
3647 # the assertion and tracing facilities, thus giving users
3648 # finer control over the code and data size requirements.
3650 cdl_component CYGPKG_INFRA_DEBUG {
3652 # No user value, uncomment the following line to provide one.
3654 # value_source default
3657 # The following properties are affected by this value
3658 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3659 # ActiveIf: CYGPKG_INFRA_DEBUG
3664 # If this option is defined, asserts in the code are tested.
3665 # Assert functions (CYG_ASSERT()) are defined in
3666 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3667 # If it is not defined, these result in no additional
3668 # object code and no checking of the asserted conditions.
3670 cdl_component CYGDBG_USE_ASSERTS {
3671 # This option is not active
3672 # The parent CYGPKG_INFRA_DEBUG is disabled
3675 # No user value, uncomment the following line to provide one.
3677 # value_source default
3679 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3680 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3683 # The following properties are affected by this value
3684 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3685 # Requires: CYGDBG_USE_ASSERTS
3686 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3687 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3692 # This option allows individual control of preconditions.
3693 # A precondition is one type of assert, which it is
3694 # useful to control separately from more general asserts.
3695 # The function is CYG_PRECONDITION(condition,msg).
3697 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3698 # This option is not active
3699 # The parent CYGDBG_USE_ASSERTS is not active
3702 # No user value, uncomment the following line to provide one.
3704 # value_source default
3709 # This option allows individual control of postconditions.
3710 # A postcondition is one type of assert, which it is
3711 # useful to control separately from more general asserts.
3712 # The function is CYG_POSTCONDITION(condition,msg).
3714 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3715 # This option is not active
3716 # The parent CYGDBG_USE_ASSERTS is not active
3719 # No user value, uncomment the following line to provide one.
3721 # value_source default
3726 # This option allows individual control of loop invariants.
3727 # A loop invariant is one type of assert, which it is
3728 # useful to control separately from more general asserts,
3729 # particularly since a loop invariant is typically evaluated
3730 # a great many times when used correctly.
3731 # The function is CYG_LOOP_INVARIANT(condition,msg).
3733 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3734 # This option is not active
3735 # The parent CYGDBG_USE_ASSERTS is not active
3738 # No user value, uncomment the following line to provide one.
3740 # value_source default
3745 # All assertions within eCos contain a text message
3746 # which should give some information about the condition
3748 # These text messages will end up being embedded in the
3749 # application image and hence there is a significant penalty
3750 # in terms of image size.
3751 # It is possible to suppress the use of these messages by
3752 # disabling this option.
3753 # This results in smaller code size, but there is less
3754 # human-readable information if an assertion actually gets
3757 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3758 # This option is not active
3759 # The parent CYGDBG_USE_ASSERTS is not active
3762 # No user value, uncomment the following line to provide one.
3764 # value_source default
3770 # If this option is defined, tracing operations
3771 # result in output or logging, depending on other options.
3772 # This may have adverse effects on performance, if the time
3773 # taken to output message overwhelms the available CPU
3774 # power or output bandwidth.
3775 # Trace functions (CYG_TRACE()) are defined in
3776 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3777 # If it is not defined, these result in no additional
3778 # object code and no trace information.
3780 cdl_component CYGDBG_USE_TRACING {
3781 # This option is not active
3782 # The parent CYGPKG_INFRA_DEBUG is disabled
3785 # No user value, uncomment the following line to provide one.
3787 # value_source default
3789 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3790 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3793 # The following properties are affected by this value
3794 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3795 # ActiveIf: CYGDBG_USE_TRACING
3796 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3797 # ActiveIf: CYGDBG_USE_TRACING
3798 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3799 # ActiveIf: CYGDBG_USE_TRACING
3800 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3801 # ActiveIf: CYGDBG_USE_TRACING
3802 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3803 # ActiveIf: CYGDBG_USE_TRACING
3807 # Trace function reports
3808 # This option allows individual control of
3809 # function entry/exit tracing, independent of
3810 # more general tracing output.
3811 # This may be useful to remove clutter from a
3814 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3815 # This option is not active
3816 # The parent CYGDBG_USE_TRACING is not active
3817 # The parent CYGDBG_USE_TRACING is disabled
3820 # No user value, uncomment the following line to provide one.
3822 # value_source default
3827 # All trace calls within eCos contain a text message
3828 # which should give some information about the circumstances.
3829 # These text messages will end up being embedded in the
3830 # application image and hence there is a significant penalty
3831 # in terms of image size.
3832 # It is possible to suppress the use of these messages by
3833 # disabling this option.
3834 # This results in smaller code size, but there is less
3835 # human-readable information available in the trace output,
3836 # possibly only filenames and line numbers.
3838 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3839 # This option is not active
3840 # The parent CYGDBG_USE_TRACING is not active
3841 # The parent CYGDBG_USE_TRACING is disabled
3844 # No user value, uncomment the following line to provide one.
3846 # value_source default
3851 # Trace output implementations
3853 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3854 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3855 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3856 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3857 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3858 # This option is not active
3859 # The parent CYGPKG_INFRA_DEBUG is disabled
3861 # This value cannot be modified here.
3865 # The following properties are affected by this value
3866 # component CYGDBG_USE_ASSERTS
3867 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3868 # component CYGDBG_USE_TRACING
3869 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3873 # A null output module which is useful when
3874 # debugging interactively; the output routines
3875 # can be breakpointed rather than have them actually
3876 # 'print' something.
3878 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3879 # This option is not active
3880 # The parent CYGPKG_INFRA_DEBUG is disabled
3883 # No user value, uncomment the following line to provide one.
3885 # value_source default
3890 # An output module which produces simple output
3891 # from tracing and assertion events.
3893 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3894 # This option is not active
3895 # The parent CYGPKG_INFRA_DEBUG is disabled
3898 # No user value, uncomment the following line to provide one.
3900 # value_source default
3905 # An output module which produces fancy output
3906 # from tracing and assertion events.
3908 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3909 # This option is not active
3910 # The parent CYGPKG_INFRA_DEBUG is disabled
3913 # No user value, uncomment the following line to provide one.
3915 # value_source default
3920 # An output module which buffers output
3921 # from tracing and assertion events. The stored
3922 # messages are output when an assert fires, or
3923 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3925 # Of course, there will only be stored messages
3926 # if tracing per se (CYGDBG_USE_TRACING)
3929 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3930 # This option is not active
3931 # The parent CYGPKG_INFRA_DEBUG is disabled
3934 # No user value, uncomment the following line to provide one.
3936 # value_source default
3942 # The size of the trace buffer. This counts the number
3943 # of trace records stored. When the buffer fills it
3944 # either wraps, stops recording, or generates output.
3946 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3947 # This option is not active
3948 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3949 # ActiveIf constraint: CYGDBG_USE_TRACING
3950 # CYGDBG_USE_TRACING == 0
3954 # No user value, uncomment the following line to provide one.
3956 # value_source default
3958 # Legal values: 5 to 65535
3961 # Wrap trace buffer when full
3962 # When the trace buffer has filled with records it
3963 # starts again at the beginning. Hence only the last
3964 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3967 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3968 # This option is not active
3969 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3970 # ActiveIf constraint: CYGDBG_USE_TRACING
3971 # CYGDBG_USE_TRACING == 0
3975 # No user value, uncomment the following line to provide one.
3977 # value_source default
3981 # Halt trace buffer when full
3982 # When the trace buffer has filled with records it
3983 # stops recording. Hence only the first
3984 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3987 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3988 # This option is not active
3989 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3990 # ActiveIf constraint: CYGDBG_USE_TRACING
3991 # CYGDBG_USE_TRACING == 0
3995 # No user value, uncomment the following line to provide one.
3997 # value_source default
4001 # Print trace buffer when full
4002 # When the trace buffer has filled with records it
4003 # prints the contents of the buffer. The buffer is then
4004 # emptied and the system continues.
4006 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
4007 # This option is not active
4008 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
4009 # ActiveIf constraint: CYGDBG_USE_TRACING
4010 # CYGDBG_USE_TRACING == 0
4014 # No user value, uncomment the following line to provide one.
4016 # value_source default
4020 # Print trace buffer on assert fail
4021 # When an assertion fails the trace buffer will be
4022 # printed to the default diagnostic device.
4024 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
4025 # This option is not active
4026 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
4027 # ActiveIf constraint: CYGDBG_USE_TRACING
4028 # CYGDBG_USE_TRACING == 0
4032 # No user value, uncomment the following line to provide one.
4034 # value_source default
4039 # Use function names
4040 # All trace and assert calls within eCos contain a
4041 # reference to the builtin macro '__PRETTY_FUNCTION__',
4042 # which evaluates to a string containing
4043 # the name of the current function.
4044 # This is useful when reading a trace log.
4045 # It is possible to suppress the use of the function name
4046 # by disabling this option.
4047 # This results in smaller code size, but there is less
4048 # human-readable information available in the trace output,
4049 # possibly only filenames and line numbers.
4051 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4052 # This option is not active
4053 # The parent CYGPKG_INFRA_DEBUG is disabled
4056 # No user value, uncomment the following line to provide one.
4058 # value_source default
4064 # Some packages require a startup routine to be called.
4065 # This can be carried out by application code, by supplying
4066 # a routine called cyg_package_start() which calls the
4067 # appropriate package startup routine(s).
4068 # Alternatively, this routine can be constructed automatically
4069 # and configured to call the startup routines of your choice.
4071 cdl_component CYGPKG_INFRA_STARTUP {
4072 # There is no associated value.
4076 # Start uITRON subsystem
4077 # Generate a call to initialize the
4078 # uITRON compatibility subsystem
4079 # within the system version of cyg_package_start().
4080 # This enables compatibility with uITRON.
4081 # You must configure uITRON with the correct tasks before
4082 # starting the uItron subsystem.
4083 # If this is disabled, and you want to use uITRON,
4084 # you must call cyg_uitron_start() from your own
4085 # cyg_package_start() or cyg_userstart().
4087 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4088 # This option is not active
4089 # ActiveIf constraint: CYGPKG_UITRON
4090 # CYGPKG_UITRON (unknown) == 0
4094 # No user value, uncomment the following line to provide one.
4096 # value_source default
4098 # Requires: CYGPKG_UITRON
4099 # CYGPKG_UITRON (unknown) == 0
4104 # Smaller slower memcpy()
4105 # Enabling this option causes the implementation of
4106 # the standard memcpy() routine to reduce code
4107 # size at the expense of execution speed. This
4108 # option is automatically enabled with the use of
4109 # the -Os option to the compiler. Also note that
4110 # the compiler will try to use its own builtin
4111 # version of memcpy() if possible, ignoring the
4112 # implementation in this package, unless given
4113 # the -fno-builtin compiler option.
4115 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4117 # No user value, uncomment the following line to provide one.
4119 # value_source default
4123 # Smaller slower memset()
4124 # Enabling this option causes the implementation of
4125 # the standard memset() routine to reduce code
4126 # size at the expense of execution speed. This
4127 # option is automatically enabled with the use of
4128 # the -Os option to the compiler. Also note that
4129 # the compiler will try to use its own builtin
4130 # version of memset() if possible, ignoring the
4131 # implementation in this package, unless given
4132 # the -fno-builtin compiler option.
4134 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4136 # No user value, uncomment the following line to provide one.
4138 # value_source default
4142 # Provide empty C++ delete functions
4143 # To deal with virtual destructors, where the correct delete()
4144 # function must be called for the derived class in question, the
4145 # underlying delete is called when needed, from destructors. This
4146 # is regardless of whether the destructor is called by delete itself.
4147 # So there is a reference to delete() from all destructors. The
4148 # default builtin delete() attempts to call free() if there is
4149 # one defined. So, if you have destructors, and you have free(),
4150 # as in malloc() and free(), any destructor counts as a reference
4151 # to free(). So the dynamic memory allocation code is linked
4152 # in regardless of whether it gets explicitly called. This
4153 # increases code and data size needlessly.
4154 # To defeat this undesirable behaviour, we define empty versions
4155 # of delete and delete. But doing this prevents proper use
4156 # of dynamic memory in C++ programs via C++'s new and delete
4158 # Therefore, this option is provided
4159 # for explicitly disabling the provision of these empty functions,
4160 # so that new and delete can be used, if that is what is required.
4162 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4164 # No user value, uncomment the following line to provide one.
4166 # value_source default
4170 # Threshold for valid number of delete calls
4171 # Some users don't know about the empty delete function and then
4172 # wonder why their C++ classes are leaking memory. If
4173 # INFRA_DEBUG is enabled we keep a counter for the number of
4174 # times delete is called. If it goes above this threshold we throw
4175 # an assertion failure. This should point heavy users of
4176 # delete in the right direction without upsetting those who want
4177 # an empty delete function.
4179 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4180 # This option is not active
4181 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4182 # CYGPKG_INFRA_DEBUG == 0
4186 # No user value, uncomment the following line to provide one.
4188 # value_source default
4189 # Default value: 100
4192 # Provide dummy abort() function
4193 # This option controls the inclusion of a dummy abort() function.
4194 # Parts of the C and C++ compiler runtime systems contain references
4195 # to abort(), particulary in the C++ exception handling code. It is
4196 # not possible to eliminate these references, so this dummy function
4197 # in included to satisfy them. It is not expected that this function
4198 # will ever be called, so its current behaviour is to simply loop.
4200 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4202 # No user value, uncomment the following line to provide one.
4204 # value_source default
4205 # Default value: CYGINT_ISO_EXIT == 0
4206 # CYGINT_ISO_EXIT == 0
4208 # Requires: !CYGINT_ISO_EXIT
4209 # CYGINT_ISO_EXIT == 0
4213 # Reset platform at end of test case execution
4214 # If this option is set then test case programs will reset the platform
4215 # when they terminate, as opposed to the default which is to just hang
4218 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4220 # No user value, uncomment the following line to provide one.
4222 # value_source default
4226 # Provide dummy strlen() function
4227 # This option controls the inclusion of a dummy strlen() function.
4228 # Parts of the C and C++ compiler runtime systems contain references
4229 # to strlen(), particulary in the C++ exception handling code. It is
4230 # not possible to eliminate these references, so this dummy function
4231 # in included to satisfy them. While it is not expected that this function
4232 # will ever be called, it is functional but uses the simplest, smallest
4233 # algorithm. There is a faster version of strlen() in the C library.
4235 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4237 # No user value, uncomment the following line to provide one.
4239 # value_source default
4240 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4241 # CYGINT_ISO_STRING_STRFUNCS == 1
4243 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4244 # CYGINT_ISO_STRING_STRFUNCS == 1
4248 # Make all compiler warnings show as errors
4249 # Enabling this option will cause all compiler warnings to show
4250 # as errors and bring the library build to a halt. This is used
4251 # to ensure that the code base is warning free, and thus ensure
4252 # that newly introduced warnings stand out and get fixed before
4253 # they show up as weird run-time behavior.
4255 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4260 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4261 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4264 # The following properties are affected by this value
4265 # option CYGBLD_GLOBAL_CFLAGS
4266 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4269 # Make compiler and assembler communicate by pipe
4270 # Enabling this option will cause the compiler to feed the
4271 # assembly output the the assembler via a pipe instead of
4272 # via a temporary file. This normally reduces the build
4275 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4280 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4281 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4285 # Infra build options
4286 # Package specific build options including control over
4287 # compiler flags used only in building this package.
4289 cdl_component CYGPKG_INFRA_OPTIONS {
4290 # There is no associated value.
4294 # Additional compiler flags
4295 # This option modifies the set of compiler flags for
4296 # building the eCos infra package. These flags are used
4297 # in addition to the set of global flags.
4299 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4301 # No user value, uncomment the following line to provide one.
4302 # user_value "-fno-rtti -Woverloaded-virtual"
4303 # value_source default
4304 # Default value: "-fno-rtti -Woverloaded-virtual"
4307 # Suppressed compiler flags
4308 # This option modifies the set of compiler flags for
4309 # building the eCos infra package. These flags are removed from
4310 # the set of global flags if present.
4312 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4314 # No user value, uncomment the following line to provide one.
4315 # user_value -Wno-pointer-sign
4316 # value_source default
4317 # Default value: -Wno-pointer-sign
4320 # Suppressed linker flags
4321 # This option modifies the set of linker flags for
4322 # building the eCos infra package tests. These flags are removed from
4323 # the set of global flags if present.
4325 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4327 # No user value, uncomment the following line to provide one.
4328 # user_value -Wl,--gc-sections
4329 # value_source default
4330 # Default value: -Wl,--gc-sections
4333 # Additional linker flags
4334 # This option modifies the set of linker flags for
4335 # building the eCos infra package tests. These flags are added to
4336 # the set of global flags if present.
4338 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4340 # No user value, uncomment the following line to provide one.
4341 # user_value -Wl,--fatal-warnings
4342 # value_source default
4343 # Default value: -Wl,--fatal-warnings
4346 # Infra package tests
4348 cdl_component CYGPKG_INFRA_TESTS {
4349 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4351 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4355 # Number of times a test runs
4356 # This option controls the number of times tests will execute their
4357 # basic function. Not all tests will honor this setting, but those
4358 # that do will execute the test N times before terminating. A value
4359 # less than 0 indicates to run forever.
4361 cdl_option CYGNUM_TESTS_RUN_COUNT {
4363 # No user value, uncomment the following line to provide one.
4365 # value_source default
4372 # Redboot ROM monitor
4373 # doc: ref/redboot.html
4374 # This package supports the Redboot [stand-alone debug monitor]
4375 # using eCos as the underlying board support mechanism.
4377 cdl_package CYGPKG_REDBOOT {
4378 # Packages cannot be added or removed, nor can their version be changed,
4379 # simply by editing their value. Instead the appropriate configuration
4380 # should be used to perform these actions.
4382 # This value cannot be modified here.
4384 # Current value: 1 current
4385 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4386 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4389 # The following properties are affected by this value
4390 # component CYGPKG_REDBOOT_ARM_OPTIONS
4391 # ActiveIf: CYGPKG_REDBOOT
4392 # component CYGPKG_REDBOOT_HAL_OPTIONS
4393 # ActiveIf: CYGPKG_REDBOOT
4394 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
4395 # ActiveIf: CYGPKG_REDBOOT
4396 # option CYGSEM_IO_ETH_DRIVERS_WARN
4397 # ActiveIf: CYGPKG_REDBOOT
4401 # Include support for ELF file format
4403 cdl_component CYGSEM_REDBOOT_ELF {
4405 # No user value, uncomment the following line to provide one.
4407 # value_source default
4412 # Use the virtual address in the ELF headers
4413 # The ELF headers contain both a virtual and a physical address
4414 # for where code/data should be loaded. By default the physical
4415 # address is used but sometimes it is necassary to use the
4416 # virtual address because of bugy toolchains
4418 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4420 # No user value, uncomment the following line to provide one.
4422 # value_source default
4427 # Methods of loading images using redboot
4429 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4430 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4431 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4432 # This value cannot be modified here.
4436 # The following properties are affected by this value
4437 # component CYGBLD_BUILD_REDBOOT
4438 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4441 # Build Redboot ROM ELF image
4442 # This option enables the building of the Redboot ELF image.
4443 # The image may require further relocation or symbol
4444 # stripping before being converted to a binary image.
4445 # This is handled by a rule in the target CDL.
4447 cdl_component CYGBLD_BUILD_REDBOOT {
4449 # No user value, uncomment the following line to provide one.
4451 # The inferred value should not be edited directly.
4453 # value_source inferred
4455 # Requires: CYGPKG_INFRA
4456 # CYGPKG_INFRA == current
4458 # Requires: CYGPKG_ISOINFRA
4459 # CYGPKG_ISOINFRA == current
4461 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4462 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4464 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4465 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4467 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4468 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4470 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4471 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4473 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4474 # CYGINT_ISO_STRING_MEMFUNCS == 1
4476 # Requires: CYGINT_ISO_STRING_STRFUNCS
4477 # CYGINT_ISO_STRING_STRFUNCS == 1
4479 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4480 # CYGINT_REDBOOT_LOAD_METHOD == 2
4483 # The following properties are affected by this value
4484 # package CYGPKG_HAL_ARM_TX53KARO
4485 # Requires: CYGBLD_BUILD_REDBOOT == 1
4486 # option CYGBLD_BUILD_REDBOOT_BIN
4487 # ActiveIf: CYGBLD_BUILD_REDBOOT
4491 # Include GDB support in RedBoot
4492 # RedBoot normally includes support for the GDB debugging
4493 # protocols. This option allows this to be disabled which
4494 # may yield a substantial savings in terms of code and memory
4497 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4498 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4499 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4504 # The inferred value should not be edited directly.
4508 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4509 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4511 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4512 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4516 # Threads debugging support
4517 # Enabling this option will include special code in the
4518 # GDB stubs to support debugging of threaded programs. In
4519 # the case of eCos programs, this support allows GDB to
4520 # have complete access to the eCos threads in the
4523 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4524 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4525 # CYG_HAL_STARTUP == ROMRAM
4529 # No user value, uncomment the following line to provide one.
4531 # value_source default
4533 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4534 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4538 # Customized version string
4539 # Use this option to define a customized version "string" for
4540 # RedBoot. Note: this value is only cosmetic, displayed by the
4541 # "version" command, but is useful for providing site specific
4542 # information about the RedBoot configuration.
4544 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4546 # No user value, uncomment the following line to provide one.
4548 # The inferred value should not be edited directly.
4549 inferred_value 1 "Ka-Ro 2010-01-06"
4550 # value_source inferred
4551 # Default value: 0 0
4554 # Enable command line editing
4555 # If this option is non-zero, RedBoot will remember the
4556 # last N command lines. These lines may be reused.
4557 # Enabling this history will also enable rudimentary
4558 # editting of the lines themselves.
4560 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4562 # No user value, uncomment the following line to provide one.
4564 # value_source default
4567 # The following properties are affected by this value
4568 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4569 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4570 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4571 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4574 # Enable command line editing using ANSI arrows, etc
4575 # If this option is enabled, RedBoot will accept standard ANSI key
4576 # sequences for cursor movement (along with the emacs style keys).
4578 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4579 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4580 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4584 # No user value, uncomment the following line to provide one.
4586 # value_source default
4590 # Enable history command and expansion
4591 # Enabling this option will allow RedBoot to provide a
4592 # history command to list previous commands. Also enables
4593 # history expansion via '!' character similar to bash
4596 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4598 # No user value, uncomment the following line to provide one.
4600 # value_source default
4602 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4603 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4607 # Number of unique RAM segments on platform
4608 # Change this option to be the number of memory segments which are
4609 # supported by the platform. If the value is greater than 1, then
4610 # a platform specific function must provide information about the
4611 # additional segments.
4613 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4615 # No user value, uncomment the following line to provide one.
4617 # value_source default
4621 # Include support gzip/zlib decompression
4623 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4624 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4625 # CYGPKG_COMPRESS_ZLIB == current
4629 # No user value, uncomment the following line to provide one.
4631 # value_source default
4634 # The following properties are affected by this value
4635 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4636 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4640 # Size of zlib decompression buffer
4641 # This is the size of the buffer filled with incoming data
4642 # during load before calls are made to the decompressor
4643 # function. For ethernet downloads this can be made bigger
4644 # (at the cost of memory), but for serial downloads on slow
4645 # processors it may be necessary to reduce the size to
4646 # avoid serial overruns. zlib appears to bail out if less
4647 # than five bytes are available initially so this is the
4650 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4652 # No user value, uncomment the following line to provide one.
4654 # value_source default
4656 # Legal values: 5 to 256
4659 # Support compression of Flash images
4660 # This CDL indicates whether flash images can
4661 # be decompressed from gzip/zlib format into RAM.
4663 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4664 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4665 # CYGPKG_REDBOOT_FLASH == 1
4667 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4668 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4669 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4672 # Calculated value: 1
4677 # Include GZIP uncompress command
4678 # Enable this option to include a 'gunzip' command
4679 # to uncompress GZIP compressed data.
4681 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4683 # No user value, uncomment the following line to provide one.
4685 # value_source default
4689 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4690 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4692 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4694 # No user value, uncomment the following line to provide one.
4696 # The inferred value should not be edited directly.
4698 # value_source inferred
4701 # The following properties are affected by this value
4702 # option CYGPRI_REDBOOT_ZLIB_FLASH
4703 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4707 # Include support for xyzModem downloads
4708 # doc: ref/download-command.html
4710 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4712 # No user value, uncomment the following line to provide one.
4714 # value_source default
4717 # The following properties are affected by this value
4718 # option CYGPKG_REDBOOT_CFLAGS_ADD
4719 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4722 # Additional compiler flags
4723 # This option modifies the set of compiler flags for
4724 # building the eCos infra package. These flags are used
4725 # in addition to the set of global flags.
4727 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4728 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4729 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4733 # No user value, uncomment the following line to provide one.
4734 # user_value -Wno-inline
4735 # value_source default
4736 # Default value: -Wno-inline
4739 # Allow the load-command write into Flash.
4740 # Write images direct to Flash via the load command.
4741 # We assume anything which is invalid RAM is flash, hence
4742 # the requires statement
4744 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4745 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4746 # CYGPKG_REDBOOT_FLASH == 1
4750 # No user value, uncomment the following line to provide one.
4752 # value_source default
4754 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4755 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4759 # Include MS Windows CE support
4760 # doc: ref/wince.html
4761 # This option enables MS Windows CE EShell support
4762 # and Windows CE .BIN images support
4764 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4771 # Include support for MXC USB downloads
4773 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4775 # No user value, uncomment the following line to provide one.
4777 # value_source default
4781 # Include support for i.MX USB OTG downloads
4783 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4785 # No user value, uncomment the following line to provide one.
4787 # value_source default
4791 # Include POSIX checksum command
4792 # doc: ref/cksum-command.html
4794 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4796 # No user value, uncomment the following line to provide one.
4798 # value_source default
4802 # Include memory fill command
4803 # doc: ref/mfill-command.html
4805 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4807 # No user value, uncomment the following line to provide one.
4809 # value_source default
4813 # Include memory compare command
4814 # doc: ref/mcmp-command.html
4816 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4818 # No user value, uncomment the following line to provide one.
4820 # value_source default
4824 # Include memory copy command
4825 # doc: ref/mcopy-command.html
4827 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4829 # No user value, uncomment the following line to provide one.
4831 # value_source default
4835 # Include memory dump command
4836 # doc: ref/dump-command.html
4838 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4840 # No user value, uncomment the following line to provide one.
4842 # value_source default
4846 # Include cache command
4847 # doc: ref/cache-command.html
4849 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4851 # No user value, uncomment the following line to provide one.
4853 # value_source default
4857 # Include exec command
4858 # doc: ref/exec-command.html
4860 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4862 # No user value, uncomment the following line to provide one.
4864 # value_source default
4867 # The following properties are affected by this value
4868 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4869 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4872 # Include I/O Memory commands 'iopeek' and 'iopoke'
4874 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4876 # No user value, uncomment the following line to provide one.
4878 # value_source default
4882 # Granularity of timer/ticks
4883 # This option controls the granularity of the timers.
4884 # Faster CPUs can afford higher granularity (lower values)
4885 # which should give higher network performance since the stack
4888 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4890 # No user value, uncomment the following line to provide one.
4892 # value_source default
4893 # Default value: 250
4894 # Legal values: 10 25 50 100 250 500 1000
4897 # Redboot Networking
4898 # This option includes networking support in RedBoot.
4900 cdl_component CYGPKG_REDBOOT_NETWORKING {
4901 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4902 # CYGPKG_IO_ETH_DRIVERS == current
4906 # No user value, uncomment the following line to provide one.
4908 # value_source default
4911 # The following properties are affected by this value
4912 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4913 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4917 # Print net debug information
4918 # This option is overriden by the configuration stored
4921 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4923 # No user value, uncomment the following line to provide one.
4925 # value_source default
4929 # Support TFTP for download
4930 # This option enables the use of the TFTP protocol for
4933 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4935 # No user value, uncomment the following line to provide one.
4937 # value_source default
4941 # Support HTTP for download
4942 # This option enables the use of the HTTP protocol for
4945 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4952 # Default IP address
4953 # This IP address is the default used by RedBoot if
4954 # a BOOTP/DHCP server does not respond. The numbers
4955 # should be separated by *commas*, and not dots. If
4956 # an IP address is configured into the Flash
4957 # configuration, that will be used in preference.
4959 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4961 # No user value, uncomment the following line to provide one.
4963 # value_source default
4964 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4965 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4970 # Do not try to use BOOTP
4971 # By default Redboot tries to use BOOTP to get an IP
4972 # address. If there's no BOOTP server on your network
4973 # use this option to avoid to wait until the
4974 # timeout. This option is overriden by the
4975 # configuration stored in flash.
4977 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4978 # This option is not active
4979 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4982 # No user value, uncomment the following line to provide one.
4984 # value_source default
4988 # Default bootp server
4989 # This IP address is the default server
4990 # address used by RedBoot if a BOOTP/DHCP
4991 # server does not respond. The numbers should
4992 # be separated by *commas*, and not dots. If
4993 # an IP address is configured into the Flash
4994 # configuration, that will be used in
4997 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4998 # This option is not active
4999 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
5002 # No user value, uncomment the following line to provide one.
5004 # value_source default
5005 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5006 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5011 # Use DHCP to get IP information
5012 # Use DHCP protocol to obtain pertinent IP addresses, such
5013 # as the client, server, gateway, etc.
5015 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
5017 # No user value, uncomment the following line to provide one.
5019 # value_source default
5022 # The following properties are affected by this value
5023 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
5024 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5027 # Use a gateway for non-local IP traffic
5028 # Enabling this option will allow the RedBoot networking
5029 # stack to use a [single] gateway to reach a non-local
5030 # IP address. If disabled, RedBoot will only be able to
5031 # reach nodes on the same subnet.
5033 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
5035 # No user value, uncomment the following line to provide one.
5037 # value_source default
5039 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5040 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
5045 # Default gateway IP address
5046 # This IP address is the default used by RedBoot
5047 # if a BOOTP/DHCP server does not respond. The
5048 # numbers should be separated by *commas*, and
5049 # not dots. If an IP address is configured into
5050 # the Flash configuration, that will be used in
5053 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5055 # No user value, uncomment the following line to provide one.
5057 # value_source default
5058 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5059 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5063 # Default IP address mask
5064 # This IP address mask is the default used by
5065 # RedBoot if a BOOTP/DHCP server does not
5066 # respond. The numbers should be separated by
5067 # *commas*, and not dots. If an IP address is
5068 # configured into the Flash configuration, that
5069 # will be used in preference.
5071 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5073 # No user value, uncomment the following line to provide one.
5075 # value_source default
5076 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5077 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5082 # TCP port to listen for incoming connections
5083 # RedBoot will 'listen' on this port for incoming TCP
5084 # connections. This allows outside connections to be made
5085 # to the platform, either for GDB or RedBoot commands.
5087 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5089 # No user value, uncomment the following line to provide one.
5091 # value_source default
5092 # Default value: 9000
5095 # Number of [network] packet buffers
5096 # RedBoot may need to buffer network data to support
5097 # various connections. This option allows control
5098 # over the number of such buffered packets, and in
5099 # turn, controls the amount of memory used by RedBoot
5100 # (which is not available to user applications).
5101 # Each packet buffer takes up about 1514 bytes.
5102 # Note: there is little need to make this larger than
5105 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5107 # No user value, uncomment the following line to provide one.
5109 # value_source default
5111 # Legal values: 3 to 8
5115 # When this option is enabled, RedBoot will be built with
5116 # support for DNS, allowing use of hostnames on the command
5119 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5120 # This option is not active
5121 # ActiveIf constraint: CYGPKG_NS_DNS
5122 # CYGPKG_NS_DNS (unknown) == 0
5126 # No user value, uncomment the following line to provide one.
5128 # value_source default
5130 # Requires: !CYGPKG_NS_DNS_BUILD
5131 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5137 # This option sets the IP of the default DNS. The IP can be
5138 # changed at runtime as well.
5140 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5141 # This option is not active
5142 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5143 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5144 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5148 # No user value, uncomment the following line to provide one.
5149 # user_value 0.0.0.0
5150 # value_source default
5151 # Default value: 0.0.0.0
5154 # Timeout in DNS lookup
5155 # This option sets the timeout used when looking up an
5156 # address via the DNS. Default is 10 seconds.
5158 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5159 # This option is not active
5160 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5163 # No user value, uncomment the following line to provide one.
5165 # value_source default
5169 # Support the use of a domain name
5170 # This option controls if Redboot supports domain
5171 # names when performing DNS lookups
5173 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5174 # This option is not active
5175 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5178 # No user value, uncomment the following line to provide one.
5180 # value_source default
5185 # Default DNS domain
5186 # This option sets the default DNS domain name.
5187 # This value will be overwritten by the value in
5188 # flash or a domain returned by DHCP
5190 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5191 # This option is not active
5192 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5193 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5196 # No user value, uncomment the following line to provide one.
5198 # value_source default
5199 # Default value: 0 0
5202 # Get DNS domain from Flash
5203 # This option enables getting the domain name
5204 # from the flash configuration. This can later be
5205 # overwritten by a value learnt from DHCP
5207 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5208 # This option is not active
5209 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5210 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5211 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5212 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5216 # No user value, uncomment the following line to provide one.
5218 # value_source default
5222 # Use DNS domain from DHCP
5223 # This option enables the use of the domain name
5226 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5227 # This option is not active
5228 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5229 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5232 # No user value, uncomment the following line to provide one.
5234 # value_source default
5238 # BOOTP/DHCP DNS domain buffer size
5239 # This options sets the size of the static
5240 # buffer used by BOOTP/DHCP to store the DNS
5241 # domain name. The domain name will not be
5242 # set if the buffer is too small to hold it.
5244 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5245 # This option is not active
5246 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5247 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5250 # No user value, uncomment the following line to provide one.
5252 # value_source default
5258 # Default network device driver
5259 # This is the name of the default network device to use.
5261 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5262 # This option is not active
5263 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5264 # CYGHWR_NET_DRIVERS == 1
5268 # No user value, uncomment the following line to provide one.
5270 # value_source default
5271 # Default value: "\"\""
5274 # Initialize only one net device
5275 # This option tells RedBoot to stop initializing network
5276 # devices when it finds the first device which is
5277 # successfully initialized. The default behavior causes
5278 # all network devices to be initialized.
5280 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5281 # This option is not active
5282 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5283 # CYGHWR_NET_DRIVERS == 1
5287 # No user value, uncomment the following line to provide one.
5289 # value_source default
5294 # Let RedBoot use any I/O channel for its console.
5295 # If this option is enabled then RedBoot will attempt to use all
5296 # defined serial I/O channels for its console device. Once input
5297 # arrives at one of these channels then the console will use only
5300 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5302 # No user value, uncomment the following line to provide one.
5304 # The inferred value should not be edited directly.
5306 # value_source inferred
5310 # Let RedBoot adjust the baud rate of the serial console.
5311 # If this option is enabled then RedBoot will support commands
5312 # to set and query the baud rate on the selected console.
5314 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5315 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5316 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5320 # No user value, uncomment the following line to provide one.
5322 # value_source default
5326 # Run a platform specific startup function.
5327 # If this option is enabled then RedBoot will execute a platform
5328 # specific startup function before entering into its command line
5329 # processing. This allows the platform to perform any special
5330 # setups before RedBoot actually starts running. Note: the entire
5331 # RedBoot environment will already be initialized at this point.
5333 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5335 # No user value, uncomment the following line to provide one.
5337 # value_source default
5341 # Run a platform specific ESA validation function.
5342 # If this option is enabled then RedBoot will execute a platform
5343 # specific function to validate an ethernet ESA. This would be
5344 # useful if the address must conform to standards set by the
5345 # hardware manufacturer, etc.
5347 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5349 # No user value, uncomment the following line to provide one.
5351 # The inferred value should not be edited directly.
5353 # value_source inferred
5356 # The following properties are affected by this value
5357 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5358 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5359 # option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI
5360 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5363 # Maximum command line length
5364 # This option allows control over how long the CLI command line
5365 # should be. This space will be allocated statically
5366 # rather than from RedBoot's stack.
5368 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5370 # No user value, uncomment the following line to provide one.
5372 # The inferred value should not be edited directly.
5374 # value_source inferred
5375 # Default value: 256
5378 # Command processing idle timeout (ms)
5379 # This option controls the timeout period before the
5380 # command processing is considered 'idle'. Making this
5381 # number smaller will cause idle processing to take place
5382 # more often, etc. The default value of 10ms is a reasonable
5383 # tradeoff between responsiveness and overhead.
5385 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5387 # No user value, uncomment the following line to provide one.
5389 # value_source default
5393 # Validate RAM addresses during load
5394 # This option controls whether or not RedBoot will make
5395 # sure that memory being used by the "load" command is
5396 # in fact in user RAM. Leaving the option enabled makes
5397 # for a safer environment, but this check may not be valid
5398 # on all platforms, thus the ability to disable it.
5399 # ** Disable this only with great care **
5401 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5403 # No user value, uncomment the following line to provide one.
5405 # value_source default
5408 # The following properties are affected by this value
5409 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5410 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5413 # Allow RedBoot to support FLASH programming
5414 # If this option is enabled then RedBoot will provide commands
5415 # to manage images in FLASH memory. These images can be loaded
5416 # into memory for execution or executed in place.
5418 cdl_component CYGPKG_REDBOOT_FLASH {
5419 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5420 # CYGHWR_IO_FLASH_DEVICE == 1
5424 # No user value, uncomment the following line to provide one.
5426 # value_source default
5429 # The following properties are affected by this value
5430 # option CYGPRI_REDBOOT_ZLIB_FLASH
5431 # ActiveIf: CYGPKG_REDBOOT_FLASH
5432 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5433 # ActiveIf: CYGPKG_REDBOOT_FLASH
5437 # Byte order used to store info in flash.
5438 # This option controls the byte ordering used to store
5439 # the FIS directory info and flash config info.
5441 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5443 # No user value, uncomment the following line to provide one.
5444 # user_value NATURAL
5445 # value_source default
5446 # Default value: NATURAL
5447 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5450 # RedBoot Flash Image System support
5451 # doc: ref/flash-image-system.html
5452 # This option enables the Flash Image System commands
5453 # and support within RedBoot. If disabled, simple Flash
5454 # access commands such as "fis write" will still exist.
5455 # This option would be disabled for targets that need simple
5456 # FLASH manipulation, but do not have the need or space for
5457 # complete image management.
5459 cdl_option CYGOPT_REDBOOT_FIS {
5461 # No user value, uncomment the following line to provide one.
5463 # value_source default
5466 # The following properties are affected by this value
5467 # component CYGPKG_REDBOOT_FIS_CONTENTS
5468 # ActiveIf: CYGOPT_REDBOOT_FIS
5469 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5470 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5471 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5472 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5475 # Max number of chunks of free space to manage
5476 # If this option is defined then "fis free" will
5477 # rely on the FIS directory to determine what space is
5478 # free within the FLASH. This option controls the
5479 # maximum number of free segment which can be handled
5480 # (typically this number is small). If this option is
5481 # not enabled, the the archaic behaviour of actually
5482 # scanning the FLASH for erased sectors (unreliable)
5483 # will be used to determine what's free and what's
5486 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5488 # No user value, uncomment the following line to provide one.
5490 # value_source default
5491 # Default value: 1 32
5494 # Flash Image System default directory contents
5496 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5497 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5498 # CYGOPT_REDBOOT_FIS == 1
5501 # Calculated value: 1
5507 # Flash block containing the Directory
5508 # Which block of flash should hold the directory
5509 # information. Positive numbers are absolute block
5510 # numbers. Negative block numbers count backwards
5511 # from the last block. eg 2 means block 2, -2
5512 # means the last but one block.
5514 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5516 # No user value, uncomment the following line to provide one.
5518 # value_source default
5521 # The following properties are affected by this value
5522 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5523 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5524 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5527 # Redundant Flash Image System Directory Support
5528 # This option enables the use of a redundant FIS
5529 # directory within RedBoot. If enabled a flash block
5530 # will be reserved for a second copy of the fis
5531 # directory. Doing this allow for power failure safe
5532 # updates of the directory by the application.
5534 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5536 # No user value, uncomment the following line to provide one.
5538 # value_source default
5540 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5541 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5546 # Flash block containing the backup Directory
5547 # Which block of flash should hold the redundant
5548 # directory information. Positive numbers are
5549 # absolute block numbers. Negative block numbers
5550 # count backwards from the last block. eg 2 means
5551 # block 2, -2 means the last but one block.
5553 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5554 # This option is not active
5555 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5558 # No user value, uncomment the following line to provide one.
5560 # value_source default
5562 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5563 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5564 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5565 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5568 # The following properties are affected by this value
5569 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5570 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5571 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5575 # Pseudo-file to describe reserved area
5576 # If an area of FLASH is reserved, it is informative to
5577 # have a fis entry describing it. This option controls
5578 # creation of such an entry by default in the fis init
5581 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5582 # This option is not active
5583 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5584 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5588 # No user value, uncomment the following line to provide one.
5590 # value_source default
5594 # File to describe RedBoot boot image
5595 # Normally a ROM-startup RedBoot image is first in the
5596 # FLASH, and the system boots using that image. This
5597 # option controls creation of an entry describing it in
5598 # the fis init command. It might be disabled if a
5599 # platform has an immutable boot image of its own, where
5600 # we use a POST-startup RedBoot instead, which performs
5601 # less board initialization.
5603 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5605 # No user value, uncomment the following line to provide one.
5607 # value_source default
5610 # The following properties are affected by this value
5611 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5612 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5613 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5614 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5617 # File to describe RedBoot POST-compatible image
5618 # This option controls creation of an entry describing a
5619 # POST-startup RedBoot image in the fis init command.
5620 # Not all platforms support POST-startup. A platform
5621 # might have both for testing purposes, where the
5622 # eventual user would substitute their own POST code for
5623 # the initial ROM-startup RedBoot, and then jump to the
5624 # POST-compatible RedBoot immediately following.
5626 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5628 # No user value, uncomment the following line to provide one.
5630 # value_source default
5631 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5632 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5637 # Offset of POST image from FLASH start
5638 # This option specifies the offset for a POST image from
5639 # the start of FLASH. If unset, then the fis entry
5640 # describing the POST image will be placed where
5643 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5644 # This option is not active
5645 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5648 # No user value, uncomment the following line to provide one.
5650 # value_source default
5651 # Default value: 0 0
5652 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5653 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5654 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5657 # The following properties are affected by this value
5658 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5659 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5663 # File to describe RedBoot backup image
5664 # This option controls creation of an entry describing a
5665 # backup RedBoot image in the fis init command.
5666 # Conventionally a RAM-startup RedBoot image is kept
5667 # under this name for use in updating the ROM-based
5668 # RedBoot that boots the board.
5670 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5672 # No user value, uncomment the following line to provide one.
5674 # value_source default
5678 # Include ARM SIB ID in FIS
5679 # If set, this option will cause the last 5 words of
5680 # the FIS to include the special ID needed for the
5681 # flash to be recognized as a reserved area for RedBoot
5682 # by an ARM BootRom monitor.
5684 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5686 # No user value, uncomment the following line to provide one.
5688 # value_source default
5692 # Size of FIS directory entry
5693 # The FIS directory is limited to one single flash
5694 # sector. If your flash has tiny sectors, you may wish
5695 # to reduce this value in order to get more slots in
5696 # the FIS directory.
5698 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5700 # No user value, uncomment the following line to provide one.
5702 # value_source default
5703 # Default value: 256
5706 # Number of FIS directory entries
5707 # The FIS directory normally occupies a single flash
5708 # sector. Adjusting this value can allow for more than
5709 # one flash sector to be used, which is useful if your
5710 # sectors are very small.
5712 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5714 # No user value, uncomment the following line to provide one.
5716 # value_source default
5720 # Maximum RedBoot image size
5721 # This option controls the maximum length reserved
5722 # for the RedBoot boot image in the FIS table.
5723 # This should be a multiple of the flash's erase
5726 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5728 # No user value, uncomment the following line to provide one.
5729 # user_value 0x00020000
5730 # The inferred value should not be edited directly.
5731 inferred_value 0x00040000
5732 # value_source inferred
5733 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5734 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5738 # Offset from start of FLASH to RedBoot boot image
5739 # This option controls where the RedBoot boot image is
5740 # located relative to the start of FLASH.
5742 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5744 # No user value, uncomment the following line to provide one.
5746 # value_source default
5747 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5748 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5750 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5751 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5752 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5755 # The following properties are affected by this value
5756 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5757 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5758 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5759 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5760 # component CYGPKG_HAL_ARM_TX53_OPTIONS
5761 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5764 # Size of reserved area at start of FLASH
5765 # This option reserves an area at the start of
5766 # FLASH where RedBoot will never interfere; it is
5767 # expected that this area contains
5768 # (non-RedBoot-based) POST code or some other boot
5769 # monitor that executes before RedBoot.
5771 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5773 # No user value, uncomment the following line to provide one.
5775 # value_source default
5778 # The following properties are affected by this value
5779 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5780 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5781 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5782 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5783 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5784 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5788 # Keep all RedBoot FLASH data blocks locked.
5789 # When this option is enabled, RedBoot will keep configuration
5790 # data and the FIS directory blocks implicitly locked. While
5791 # this is somewhat safer, it does add overhead during updates.
5793 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5794 # This option is not active
5795 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5796 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5800 # No user value, uncomment the following line to provide one.
5802 # value_source default
5806 # Use CRC checksums on FIS images.
5807 # When this option is enabled, RedBoot will use CRC checksums
5808 # when reading and writing flash images.
5810 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5812 # No user value, uncomment the following line to provide one.
5814 # The inferred value should not be edited directly.
5816 # value_source inferred
5820 # ARM FLASH drivers support SIB flash block structure
5821 # This interface is implemented by a flash driver
5822 # to indicate that it supports the ARM SIB flash
5825 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5826 # No options implement this inferface
5827 # ActiveIf constraint: CYGPKG_HAL_ARM
5828 # CYGPKG_HAL_ARM == current
5831 # This value cannot be modified here.
5835 # The following properties are affected by this value
5836 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5837 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5840 # Use ARM SIB flash block structure
5841 # This option is used to interpret ARM Flash System
5842 # information blocks.
5844 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5845 # This option is not active
5846 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5847 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5851 # No user value, uncomment the following line to provide one.
5853 # value_source default
5858 # Keep RedBoot configuration data in FLASH
5859 # When this option is enabled, RedBoot will keep configuration
5860 # data in a separate block of FLASH memory. This data will
5861 # include such items as the node IP address or startup scripts.
5863 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5865 # No user value, uncomment the following line to provide one.
5867 # value_source default
5868 # Default value: CYGPKG_IO_FLASH != 0
5869 # CYGPKG_IO_FLASH == current
5872 # The following properties are affected by this value
5873 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5874 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5875 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5876 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5877 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5878 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5879 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5880 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5881 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5882 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5883 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5884 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5885 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5886 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5890 # Length of configuration data in FLASH
5891 # This option is used to control the amount of memory and FLASH
5892 # to be used for configuration options (persistent storage).
5894 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5896 # No user value, uncomment the following line to provide one.
5898 # value_source default
5899 # Default value: 4096
5902 # Style of media used for persistent data storage
5903 # Persistent data storage can either be held in 'norma' FLASH
5904 # or some other device (represented by the 'EEPROM' choice).
5905 # The different styles utilize different access methods.
5907 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5909 # No user value, uncomment the following line to provide one.
5911 # value_source default
5912 # Default value: FLASH
5913 # Legal values: "FLASH" "EEPROM"
5915 # The following properties are affected by this value
5916 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5917 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5918 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5919 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5922 # Merged config data and FIS directory
5923 # If this option is set, then the FIS directory and FLASH
5924 # configuration database will be stored in the same physical
5927 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5928 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5929 # CYGOPT_REDBOOT_FIS == 1
5930 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5934 # No user value, uncomment the following line to provide one.
5936 # value_source default
5939 # The following properties are affected by this value
5940 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5941 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5944 # Which block of flash to use
5945 # Which block of flash should hold the configuration
5946 # information. Positive numbers are absolute block numbers.
5947 # Negative block numbers count backwards from the last block.
5948 # eg 2 means block 2, -2 means the last but one block.
5950 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5952 # No user value, uncomment the following line to provide one.
5954 # value_source default
5958 # Support simple macros/aliases in FLASH
5959 # This option is used to allow support for simple text-based
5960 # macros (aliases). These aliases are kept in the FLASH
5961 # configuration data (persistent storage).
5963 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5965 # No user value, uncomment the following line to provide one.
5967 # value_source default
5971 # Length of strings in FLASH configuration data
5972 # This option is used to control the amount of memory
5973 # and FLASH to be used for string configuration
5974 # options (persistent storage).
5976 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5978 # No user value, uncomment the following line to provide one.
5980 # value_source default
5981 # Default value: 128
5984 # Length of configuration script(s) in FLASH
5985 # This option is used to control the amount of memory and
5986 # FLASH to be used for configuration options (persistent
5989 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5991 # No user value, uncomment the following line to provide one.
5993 # The inferred value should not be edited directly.
5995 # value_source inferred
5996 # Default value: 512
5999 # Fallback to read-only FLASH configuration
6000 # This option will cause the configuration information to
6001 # revert to the readonly information stored in the FLASH.
6002 # The option only takes effect after
6003 # 1) the config_ok flag has been set to be true,
6004 # indicating that at one time the copy in RAM was valid;
6006 # 2) the information in RAM has been verified to be invalid
6008 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
6010 # No user value, uncomment the following line to provide one.
6012 # value_source default
6013 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
6014 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
6019 # Allow RedBoot to support fileio
6020 # If this option is enabled then RedBoot will provide commands
6021 # to load files from fileio file systems such as JFFS2.
6023 cdl_component CYGPKG_REDBOOT_FILEIO {
6024 # This option is not active
6025 # ActiveIf constraint: CYGPKG_IO_FILEIO
6026 # CYGPKG_IO_FILEIO (unknown) == 0
6030 # No user value, uncomment the following line to provide one.
6032 # value_source default
6035 # The following properties are affected by this value
6036 # option CYGNUM_REDBOOT_GETC_BUFFER
6037 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6041 # Include an ls command
6042 # If this option is enabled a simple ls command will be
6043 # included in redboot so the contents of a directory
6046 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
6047 # This option is not active
6048 # The parent CYGPKG_REDBOOT_FILEIO is not active
6051 # No user value, uncomment the following line to provide one.
6053 # value_source default
6058 # Allow RedBoot to support disks
6059 # If this option is enabled then RedBoot will provide commands
6060 # to load disk files.
6062 cdl_component CYGPKG_REDBOOT_DISK {
6070 # Include Redboot commands for disk access
6072 cdl_option CYGSEM_REDBOOT_DISK {
6073 # This option is not active
6074 # The parent CYGPKG_REDBOOT_DISK is disabled
6077 # No user value, uncomment the following line to provide one.
6079 # value_source default
6080 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6081 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6085 # Hardware drivers for disk-type devices
6087 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6088 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6089 # This option is not active
6090 # The parent CYGPKG_REDBOOT_DISK is disabled
6092 # This value cannot be modified here.
6096 # The following properties are affected by this value
6097 # option CYGSEM_REDBOOT_DISK
6098 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6101 # Maximum number of supported disks
6102 # This option controls the number of disks supported by
6105 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6106 # This option is not active
6107 # The parent CYGPKG_REDBOOT_DISK is disabled
6110 # No user value, uncomment the following line to provide one.
6112 # value_source default
6116 # Maximum number of partitions per disk
6117 # This option controls the maximum number of supported
6118 # partitions per disk.
6120 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6121 # This option is not active
6122 # The parent CYGPKG_REDBOOT_DISK is disabled
6125 # No user value, uncomment the following line to provide one.
6127 # value_source default
6131 # Support IDE disks.
6132 # When this option is enabled, RedBoot will support IDE disks.
6134 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6135 # This option is not active
6136 # The parent CYGPKG_REDBOOT_DISK is disabled
6137 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6138 # CYGINT_HAL_PLF_IF_IDE == 0
6142 # No user value, uncomment the following line to provide one.
6144 # value_source default
6149 # Work with VMware virtual disks
6150 # This option controls the disk driver behavior at
6153 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6154 # This option is not active
6155 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6158 # No user value, uncomment the following line to provide one.
6160 # value_source default
6165 # Support Linux second extended filesystems.
6166 # When this option is enabled, RedBoot will support EXT2
6169 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6170 # This option is not active
6171 # The parent CYGPKG_REDBOOT_DISK is disabled
6174 # No user value, uncomment the following line to provide one.
6176 # value_source default
6180 # Support ISO9660 filesystems.
6181 # When this option is enabled, RedBoot will support ISO9660
6184 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6185 # This option is not active
6186 # The parent CYGPKG_REDBOOT_DISK is disabled
6188 # Calculated value: 0
6195 # doc: ref/persistent-state-flash.html
6196 # This contains options related to RedBoot's boot script
6199 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6200 # There is no associated value.
6204 # Boot scripting enabled
6205 # This option controls whether RedBoot boot script
6206 # functionality is enabled.
6208 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6209 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6210 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6211 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6214 # Calculated value: 1
6219 # Use default RedBoot boot script
6220 # If enabled, this option will tell RedBoot to use the
6221 # value of this option as a default boot script.
6223 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6225 # No user value, uncomment the following line to provide one.
6227 # The inferred value should not be edited directly.
6229 # value_source inferred
6230 # Default value: 0 0
6232 # The following properties are affected by this value
6233 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6234 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6237 # Resolution (in ms) for script timeout value.
6238 # This option controls the resolution of the script
6239 # timeout. The value is specified in milliseconds
6240 # (ms), thus to have the script timeout be defined in
6241 # terms of tenths of seconds, use 100.
6243 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6245 # No user value, uncomment the following line to provide one.
6247 # The inferred value should not be edited directly.
6249 # value_source inferred
6250 # Default value: 1000
6253 # Script default timeout value
6254 # This option is used to set the default timeout for startup
6255 # scripts, when they are enabled.
6257 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6259 # No user value, uncomment the following line to provide one.
6261 # The inferred value should not be edited directly.
6263 # value_source inferred
6268 # Support RTC for time & date functions
6269 # When this option is enabled, RedBoot will support commands to
6270 # query and set the real time clock (time and date)
6272 cdl_option CYGSEM_REDBOOT_RTC {
6273 # This option is not active
6274 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6275 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6279 # No user value, uncomment the following line to provide one.
6281 # value_source default
6285 # Behave like a ROM monitor
6286 # Enabling this option will allow RedBoot to provide ROM
6287 # monitor-style services to programs which it executes.
6289 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6290 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6291 # CYG_HAL_STARTUP == ROMRAM
6292 # CYG_HAL_STARTUP == ROMRAM
6295 # Calculated value: 1
6298 # Requires: CYGSEM_HAL_ROM_MONITOR
6299 # CYGSEM_HAL_ROM_MONITOR == 1
6303 # Allow RedBoot to handle GNUPro application 'syscalls'.
6304 # If this option is enabled then RedBoot will install a
6305 # syscall handler to support debugging of applications
6306 # based on GNUPro newlib/bsp.
6308 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6310 # No user value, uncomment the following line to provide one.
6312 # value_source default
6315 # The following properties are affected by this value
6316 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6317 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6318 # option CYGPKG_HAL_GDB_FILEIO
6319 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6323 # Support additional syscalls for 'gprof' profiling
6324 # Support additional syscalls to support a periodic callback
6325 # function for histogram-style profiling, and an enquire/set
6327 # The application must use the GNUPro newlib facilities
6330 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6331 # This option is not active
6332 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6333 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6334 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6338 # No user value, uncomment the following line to provide one.
6340 # value_source default
6344 # Does the HAL support 'gprof' profiling?
6346 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6347 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6348 # This option is not active
6349 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6351 # This value cannot be modified here.
6355 # The following properties are affected by this value
6356 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6357 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6360 # Do not raise SIGTRAP when program exits
6361 # For some (single shot) newlib based programs,
6362 # exiting and returning a termination status may be
6363 # the normal expected behavior.
6365 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6366 # This option is not active
6367 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6370 # No user value, uncomment the following line to provide one.
6372 # value_source default
6377 # Use a common buffer for Zlib and FIS
6378 # Use a common memory buffer for both the zlib workspace
6379 # and FIS directory operations. This can save a substantial
6380 # amount of RAM, especially when flash sectors are large.
6382 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6383 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6384 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6385 # CYGOPT_REDBOOT_FIS == 1
6389 # No user value, uncomment the following line to provide one.
6391 # value_source default
6396 # Size of Zlib/FIS common buffer
6397 # Size of common buffer to allocate. Must be at least the
6398 # size of one flash sector.
6400 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6401 # This option is not active
6402 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6405 # No user value, uncomment the following line to provide one.
6406 # user_value 0x0000C000
6407 # value_source default
6408 # Default value: 0x0000C000
6409 # Legal values: 0x4000 to 0x80000000
6413 # Buffer size in getc when loading images
6414 # When loading images a buffer is used between redboot and the
6415 # underlying storage medium, eg a filesystem, or a socket etc.
6416 # The size of this buffer can have a big impart on load speed.
6418 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6420 # No user value, uncomment the following line to provide one.
6422 # value_source default
6423 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6424 # CYGPKG_REDBOOT_FILEIO == 0
6429 # Redboot for ARM options
6430 # This option lists the target's requirements for a valid Redboot
6433 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6434 # ActiveIf constraint: CYGPKG_REDBOOT
6435 # CYGPKG_REDBOOT == current
6438 # There is no associated value.
6440 # The following properties are affected by this value
6444 # Provide the exec command in RedBoot
6445 # This option contains requirements for booting linux
6446 # from RedBoot. The component is enabled/disabled from
6449 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6450 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6451 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6454 # There is no associated value.
6458 # Enable -x switch for exec command.
6459 # This option allows bi-endian platforms to launch kernels
6460 # built for an endianess different than the RedBoot endianess
6462 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6464 # No user value, uncomment the following line to provide one.
6466 # value_source default
6470 # Physical base address of linux kernel
6471 # This is the physical address of the base of the
6472 # Linux kernel image.
6474 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6476 # No user value, uncomment the following line to provide one.
6477 # user_value 0x70108000
6478 # value_source default
6479 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6480 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6484 # Default physical base address of linux kernel
6485 # This is the physical address of the base of the
6486 # Linux kernel image. This option gets set by the
6489 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6491 # No user value, uncomment the following line to provide one.
6492 # user_value 0x00008000
6493 # The inferred value should not be edited directly.
6494 inferred_value 0x70108000
6495 # value_source inferred
6496 # Default value: 0x00008000
6498 # The following properties are affected by this value
6499 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6500 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6501 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
6502 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6505 # Base address of linux kernel parameter tags
6506 # This is the base address of the area of memory used to
6507 # pass parameters to the Linux kernel. This should be chosen
6508 # to avoid overlap with the kernel and any ramdisk image.
6510 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6512 # No user value, uncomment the following line to provide one.
6513 # user_value 0x00000100
6514 # value_source default
6515 # Default value: 0x00000100
6520 # Redboot HAL options
6521 # This option lists the target's requirements for a valid Redboot
6524 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6525 # ActiveIf constraint: CYGPKG_REDBOOT
6526 # CYGPKG_REDBOOT == current
6529 # There is no associated value.
6533 # Build Redboot ROM binary image
6534 # This option enables the conversion of the Redboot ELF
6535 # image to a binary image suitable for ROM programming.
6537 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6538 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6539 # CYGBLD_BUILD_REDBOOT == 1
6543 # No user value, uncomment the following line to provide one.
6545 # value_source default
6550 # Redboot HAL variant options
6552 cdl_component CYGPKG_REDBOOT_HAL_TX53_OPTIONS {
6553 # ActiveIf constraint: CYGPKG_REDBOOT
6554 # CYGPKG_REDBOOT == current
6557 # There is no associated value.
6558 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6559 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6564 # ISO C and POSIX infrastructure
6565 # eCos supports implementations of ISO C libraries and POSIX
6566 # implementations. This package provides infrastructure used by
6567 # all such implementations.
6569 cdl_package CYGPKG_ISOINFRA {
6570 # Packages cannot be added or removed, nor can their version be changed,
6571 # simply by editing their value. Instead the appropriate configuration
6572 # should be used to perform these actions.
6574 # This value cannot be modified here.
6576 # Current value: 1 current
6578 # The following properties are affected by this value
6579 # component CYGBLD_BUILD_REDBOOT
6580 # Requires: CYGPKG_ISOINFRA
6581 # package CYGPKG_LIBC_STRING
6582 # Requires: CYGPKG_ISOINFRA
6583 # package CYGPKG_COMPRESS_ZLIB
6584 # Requires: CYGPKG_ISOINFRA
6585 # package CYGPKG_IO_FLASH
6586 # Requires: CYGPKG_ISOINFRA
6587 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6588 # Requires: CYGPKG_ISOINFRA
6589 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6590 # DefaultValue: 0 != CYGPKG_ISOINFRA
6591 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6592 # ActiveIf: CYGPKG_ISOINFRA
6593 # package CYGPKG_LIBC_I18N
6594 # Requires: CYGPKG_ISOINFRA
6595 # package CYGPKG_LIBC_STDLIB
6596 # Requires: CYGPKG_ISOINFRA
6600 # Startup and termination
6602 cdl_component CYGPKG_ISO_STARTUP {
6603 # There is no associated value.
6607 # main() startup implementations
6608 # Implementations of this interface arrange for a user-supplied
6609 # main() to be called in an ISO compatible environment.
6611 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6612 # No options implement this inferface
6613 # This value cannot be modified here.
6616 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6617 # CYGINT_ISO_MAIN_STARTUP == 0
6620 # The following properties are affected by this value
6621 # interface CYGINT_ISO_MAIN_STARTUP
6622 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6625 # environ implementations
6626 # Implementations of this interface provide the environ
6627 # variable required by POSIX.
6629 cdl_interface CYGINT_ISO_ENVIRON {
6630 # No options implement this inferface
6631 # This value cannot be modified here.
6634 # Requires: 1 >= CYGINT_ISO_ENVIRON
6635 # CYGINT_ISO_ENVIRON == 0
6638 # The following properties are affected by this value
6639 # interface CYGINT_ISO_ENVIRON
6640 # Requires: 1 >= CYGINT_ISO_ENVIRON
6646 cdl_component CYGPKG_ISO_CTYPE_H {
6647 # There is no associated value.
6651 # Number of implementations of ctype functions
6653 cdl_interface CYGINT_ISO_CTYPE {
6654 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6655 # This value cannot be modified here.
6658 # Requires: 1 >= CYGINT_ISO_CTYPE
6659 # CYGINT_ISO_CTYPE == 1
6662 # The following properties are affected by this value
6663 # interface CYGINT_ISO_CTYPE
6664 # Requires: 1 >= CYGINT_ISO_CTYPE
6665 # package CYGPKG_HAL_ARM_TX53KARO
6666 # Requires: CYGINT_ISO_CTYPE
6667 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6668 # Requires: CYGINT_ISO_CTYPE
6669 # package CYGPKG_LIBC_STDLIB
6670 # Requires: CYGINT_ISO_CTYPE
6673 # Ctype implementation header
6675 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6677 # No user value, uncomment the following line to provide one.
6679 # The inferred value should not be edited directly.
6680 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6681 # value_source inferred
6682 # Default value: 0 0
6684 # The following properties are affected by this value
6685 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6686 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6687 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6688 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6694 cdl_component CYGPKG_ISO_ERRNO {
6695 # There is no associated value.
6699 # Number of implementations of error codes
6701 cdl_interface CYGINT_ISO_ERRNO_CODES {
6702 # Implemented by CYGPKG_ERROR, active, enabled
6703 # This value cannot be modified here.
6706 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6707 # CYGINT_ISO_ERRNO_CODES == 1
6710 # The following properties are affected by this value
6711 # interface CYGINT_ISO_ERRNO_CODES
6712 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6715 # Error codes implementation header
6717 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6719 # No user value, uncomment the following line to provide one.
6721 # The inferred value should not be edited directly.
6722 inferred_value 1 <cyg/error/codes.h>
6723 # value_source inferred
6724 # Default value: 0 0
6726 # The following properties are affected by this value
6727 # package CYGPKG_ERROR
6728 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6731 # Number of implementations of errno variable
6733 cdl_interface CYGINT_ISO_ERRNO {
6734 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6735 # This value cannot be modified here.
6738 # Requires: 1 >= CYGINT_ISO_ERRNO
6739 # CYGINT_ISO_ERRNO == 1
6742 # The following properties are affected by this value
6743 # interface CYGINT_ISO_ERRNO
6744 # Requires: 1 >= CYGINT_ISO_ERRNO
6747 # errno variable implementation header
6749 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6751 # No user value, uncomment the following line to provide one.
6753 # The inferred value should not be edited directly.
6754 inferred_value 1 <cyg/error/errno.h>
6755 # value_source inferred
6756 # Default value: 0 0
6758 # The following properties are affected by this value
6759 # component CYGPKG_ERROR_ERRNO
6760 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6764 # Locale-related functions
6766 cdl_component CYGPKG_ISO_LOCALE {
6767 # There is no associated value.
6771 # Number of implementations of locale functions
6773 cdl_interface CYGINT_ISO_LOCALE {
6774 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6775 # This value cannot be modified here.
6778 # Requires: 1 >= CYGINT_ISO_LOCALE
6779 # CYGINT_ISO_LOCALE == 1
6782 # The following properties are affected by this value
6783 # interface CYGINT_ISO_LOCALE
6784 # Requires: 1 >= CYGINT_ISO_LOCALE
6787 # Locale implementation header
6789 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6791 # No user value, uncomment the following line to provide one.
6793 # value_source default
6794 # Default value: 0 0
6798 # Standard I/O-related functionality
6800 cdl_component CYGPKG_ISO_STDIO {
6801 # There is no associated value.
6805 # Number of implementations of stdio file types
6807 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6808 # No options implement this inferface
6809 # This value cannot be modified here.
6811 # Current value: 0 0
6812 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6813 # CYGINT_ISO_STDIO_FILETYPES == 0
6816 # The following properties are affected by this value
6817 # interface CYGINT_ISO_STDIO_FILETYPES
6818 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6821 # Stdio file types implementation header
6823 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6825 # No user value, uncomment the following line to provide one.
6827 # value_source default
6828 # Default value: 0 0
6831 # Stdio standard streams implementations
6833 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6834 # No options implement this inferface
6835 # This value cannot be modified here.
6837 # Current value: 0 0
6838 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6839 # CYGINT_ISO_STDIO_STREAMS == 0
6842 # The following properties are affected by this value
6843 # interface CYGINT_ISO_STDIO_STREAMS
6844 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6847 # Stdio standard streams implementation header
6848 # This header file must define stdin, stdout
6851 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6853 # No user value, uncomment the following line to provide one.
6855 # value_source default
6856 # Default value: 0 0
6859 # Number of implementations of stdio file operations
6861 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6862 # No options implement this inferface
6863 # This value cannot be modified here.
6865 # Current value: 0 0
6866 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6867 # CYGINT_ISO_STDIO_FILEOPS == 0
6870 # The following properties are affected by this value
6871 # interface CYGINT_ISO_STDIO_FILEOPS
6872 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6875 # Stdio file operations implementation header
6876 # This header controls the file system operations on a file
6877 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6880 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6882 # No user value, uncomment the following line to provide one.
6884 # value_source default
6885 # Default value: 0 0
6888 # Number of implementations of stdio file access functionals
6890 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6891 # No options implement this inferface
6892 # This value cannot be modified here.
6894 # Current value: 0 0
6895 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6896 # CYGINT_ISO_STDIO_FILEACCESS == 0
6899 # The following properties are affected by this value
6900 # interface CYGINT_ISO_STDIO_FILEACCESS
6901 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6902 # option CYGFUN_COMPRESS_ZLIB_GZIO
6903 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6906 # Stdio file access implementation header
6907 # This header controls the file access operations
6908 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6909 # setvbuf(), and associated constants.
6911 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6913 # No user value, uncomment the following line to provide one.
6915 # value_source default
6916 # Default value: 0 0
6919 # Number of implementations of stdio formatted I/O
6921 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6922 # No options implement this inferface
6923 # This value cannot be modified here.
6925 # Current value: 0 0
6926 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6927 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6930 # The following properties are affected by this value
6931 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6932 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6933 # option CYGFUN_COMPRESS_ZLIB_GZIO
6934 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6937 # Stdio formatted I/O implementation header
6939 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6941 # No user value, uncomment the following line to provide one.
6943 # value_source default
6944 # Default value: 0 0
6947 # Number of implementations of stdio character I/O
6949 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6950 # No options implement this inferface
6951 # This value cannot be modified here.
6953 # Current value: 0 0
6954 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6955 # CYGINT_ISO_STDIO_CHAR_IO == 0
6958 # The following properties are affected by this value
6959 # interface CYGINT_ISO_STDIO_CHAR_IO
6960 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6963 # Stdio character I/O implementation header
6965 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6967 # No user value, uncomment the following line to provide one.
6969 # value_source default
6970 # Default value: 0 0
6973 # Number of implementations of stdio direct I/O
6975 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6976 # No options implement this inferface
6977 # This value cannot be modified here.
6979 # Current value: 0 0
6980 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6981 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6984 # The following properties are affected by this value
6985 # interface CYGINT_ISO_STDIO_DIRECT_IO
6986 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6989 # Stdio direct I/O implementation header
6991 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6993 # No user value, uncomment the following line to provide one.
6995 # value_source default
6996 # Default value: 0 0
6999 # Number of implementations of stdio file positioning
7001 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
7002 # No options implement this inferface
7003 # This value cannot be modified here.
7005 # Current value: 0 0
7006 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
7007 # CYGINT_ISO_STDIO_FILEPOS == 0
7010 # The following properties are affected by this value
7011 # interface CYGINT_ISO_STDIO_FILEPOS
7012 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
7013 # option CYGFUN_COMPRESS_ZLIB_GZIO
7014 # Requires: CYGINT_ISO_STDIO_FILEPOS
7017 # Stdio file positioning implementation header
7019 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
7021 # No user value, uncomment the following line to provide one.
7023 # value_source default
7024 # Default value: 0 0
7027 # Number of implementations of stdio error handling
7029 cdl_interface CYGINT_ISO_STDIO_ERROR {
7030 # No options implement this inferface
7031 # This value cannot be modified here.
7033 # Current value: 0 0
7034 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7035 # CYGINT_ISO_STDIO_ERROR == 0
7038 # The following properties are affected by this value
7039 # interface CYGINT_ISO_STDIO_ERROR
7040 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7043 # Stdio error handling implementation header
7045 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
7047 # No user value, uncomment the following line to provide one.
7049 # value_source default
7050 # Default value: 0 0
7053 # POSIX fd-related function implementations
7055 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7056 # No options implement this inferface
7057 # This value cannot be modified here.
7059 # Current value: 0 0
7060 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7061 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7064 # The following properties are affected by this value
7065 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7066 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7069 # POSIX fd-related function implementation header
7071 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7073 # No user value, uncomment the following line to provide one.
7075 # value_source default
7076 # Default value: 0 0
7080 # Standard general utility functions
7082 cdl_component CYGPKG_ISO_STDLIB {
7083 # There is no associated value.
7087 # String conversion function implementations
7089 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7090 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7091 # This value cannot be modified here.
7094 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7095 # CYGINT_ISO_STDLIB_STRCONV == 1
7098 # The following properties are affected by this value
7099 # interface CYGINT_ISO_STDLIB_STRCONV
7100 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7103 # String conversion function implementation header
7105 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7107 # No user value, uncomment the following line to provide one.
7109 # The inferred value should not be edited directly.
7110 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7111 # value_source inferred
7112 # Default value: 0 0
7114 # The following properties are affected by this value
7115 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7116 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7119 # String to FP conversion function implementations
7121 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7122 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7123 # This value cannot be modified here.
7126 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7127 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7130 # The following properties are affected by this value
7131 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7132 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7135 # String to FP conversion function implementation header
7137 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7139 # No user value, uncomment the following line to provide one.
7141 # value_source default
7142 # Default value: 0 0
7145 # Random number generator implementations
7147 cdl_interface CYGINT_ISO_RAND {
7148 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7149 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7150 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7151 # This value cannot be modified here.
7154 # Requires: 1 >= CYGINT_ISO_RAND
7155 # CYGINT_ISO_RAND == 1
7158 # The following properties are affected by this value
7159 # interface CYGINT_ISO_RAND
7160 # Requires: 1 >= CYGINT_ISO_RAND
7163 # Random number generator implementation header
7165 cdl_option CYGBLD_ISO_RAND_HEADER {
7167 # No user value, uncomment the following line to provide one.
7169 # value_source default
7170 # Default value: 0 0
7173 # Malloc implementations
7175 cdl_interface CYGINT_ISO_MALLOC {
7176 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7177 # This value cannot be modified here.
7180 # Requires: 1 >= CYGINT_ISO_MALLOC
7181 # CYGINT_ISO_MALLOC == 1
7184 # The following properties are affected by this value
7185 # interface CYGINT_ISO_MALLOC
7186 # Requires: 1 >= CYGINT_ISO_MALLOC
7187 # option CYGFUN_LIBC_STRING_STRDUP
7188 # ActiveIf: CYGINT_ISO_MALLOC
7191 # Malloc implementation header
7193 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7195 # No user value, uncomment the following line to provide one.
7197 # value_source default
7198 # Default value: 0 0
7201 # Mallinfo() implementations
7203 cdl_interface CYGINT_ISO_MALLINFO {
7204 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7205 # This value cannot be modified here.
7208 # Requires: 1 >= CYGINT_ISO_MALLINFO
7209 # CYGINT_ISO_MALLINFO == 1
7212 # The following properties are affected by this value
7213 # interface CYGINT_ISO_MALLINFO
7214 # Requires: 1 >= CYGINT_ISO_MALLINFO
7217 # Mallinfo() implementation header
7219 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7221 # No user value, uncomment the following line to provide one.
7223 # value_source default
7224 # Default value: 0 0
7227 # Program exit functionality implementations
7229 cdl_interface CYGINT_ISO_EXIT {
7230 # No options implement this inferface
7231 # This value cannot be modified here.
7234 # Requires: 1 >= CYGINT_ISO_EXIT
7235 # CYGINT_ISO_EXIT == 0
7238 # The following properties are affected by this value
7239 # interface CYGINT_ISO_EXIT
7240 # Requires: 1 >= CYGINT_ISO_EXIT
7241 # option CYGFUN_INFRA_DUMMY_ABORT
7242 # Requires: !CYGINT_ISO_EXIT
7243 # option CYGFUN_INFRA_DUMMY_ABORT
7244 # DefaultValue: CYGINT_ISO_EXIT == 0
7247 # Program exit functionality implementation header
7249 cdl_option CYGBLD_ISO_EXIT_HEADER {
7251 # No user value, uncomment the following line to provide one.
7253 # value_source default
7254 # Default value: 0 0
7257 # Program environment implementations
7259 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7260 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7261 # This value cannot be modified here.
7264 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7265 # CYGINT_ISO_STDLIB_ENVIRON == 1
7268 # The following properties are affected by this value
7269 # interface CYGINT_ISO_STDLIB_ENVIRON
7270 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7273 # Program environment implementation header
7275 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7277 # No user value, uncomment the following line to provide one.
7279 # value_source default
7280 # Default value: 0 0
7283 # system() implementations
7285 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7286 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7287 # This value cannot be modified here.
7290 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7291 # CYGINT_ISO_STDLIB_SYSTEM == 1
7294 # The following properties are affected by this value
7295 # interface CYGINT_ISO_STDLIB_SYSTEM
7296 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7299 # system() implementation header
7301 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7303 # No user value, uncomment the following line to provide one.
7305 # value_source default
7306 # Default value: 0 0
7309 # bsearch() implementations
7311 cdl_interface CYGINT_ISO_BSEARCH {
7312 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7313 # This value cannot be modified here.
7316 # Requires: 1 >= CYGINT_ISO_BSEARCH
7317 # CYGINT_ISO_BSEARCH == 1
7320 # The following properties are affected by this value
7321 # interface CYGINT_ISO_BSEARCH
7322 # Requires: 1 >= CYGINT_ISO_BSEARCH
7325 # bsearch() implementation header
7327 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7329 # No user value, uncomment the following line to provide one.
7331 # value_source default
7332 # Default value: 0 0
7335 # qsort() implementations
7337 cdl_interface CYGINT_ISO_QSORT {
7338 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7339 # This value cannot be modified here.
7342 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7343 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7346 # The following properties are affected by this value
7349 # qsort() implementation header
7351 cdl_option CYGBLD_ISO_QSORT_HEADER {
7353 # No user value, uncomment the following line to provide one.
7355 # value_source default
7356 # Default value: 0 0
7359 # abs()/labs() implementations
7361 cdl_interface CYGINT_ISO_ABS {
7362 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7363 # This value cannot be modified here.
7366 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7367 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7370 # The following properties are affected by this value
7373 # abs()/labs() implementation header
7375 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7377 # No user value, uncomment the following line to provide one.
7379 # The inferred value should not be edited directly.
7380 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7381 # value_source inferred
7382 # Default value: 0 0
7384 # The following properties are affected by this value
7385 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7386 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7389 # div()/ldiv() implementations
7391 cdl_interface CYGINT_ISO_DIV {
7392 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7393 # This value cannot be modified here.
7396 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7397 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7400 # The following properties are affected by this value
7403 # div()/ldiv() implementation header
7405 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7407 # No user value, uncomment the following line to provide one.
7409 # The inferred value should not be edited directly.
7410 inferred_value 1 <cyg/libc/stdlib/div.inl>
7411 # value_source inferred
7412 # Default value: 0 0
7414 # The following properties are affected by this value
7415 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7416 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7419 # Header defining the implementation's MB_CUR_MAX
7421 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7423 # No user value, uncomment the following line to provide one.
7425 # value_source default
7426 # Default value: 0 0
7428 # The following properties are affected by this value
7429 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7430 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7433 # Multibyte character implementations
7435 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7436 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7437 # This value cannot be modified here.
7440 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7441 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7444 # The following properties are affected by this value
7445 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7446 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7449 # Multibyte character implementation header
7451 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7453 # No user value, uncomment the following line to provide one.
7455 # value_source default
7456 # Default value: 0 0
7462 cdl_component CYGPKG_ISO_STRING {
7463 # There is no associated value.
7467 # Number of implementations of strerror() function
7469 cdl_interface CYGINT_ISO_STRERROR {
7470 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7471 # This value cannot be modified here.
7473 # Current value: 1 1
7474 # Requires: 1 >= CYGINT_ISO_STRERROR
7475 # CYGINT_ISO_STRERROR == 1
7478 # The following properties are affected by this value
7479 # interface CYGINT_ISO_STRERROR
7480 # Requires: 1 >= CYGINT_ISO_STRERROR
7483 # strerror() implementation header
7485 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7487 # No user value, uncomment the following line to provide one.
7489 # The inferred value should not be edited directly.
7490 inferred_value 1 <cyg/error/strerror.h>
7491 # value_source inferred
7492 # Default value: 0 0
7494 # The following properties are affected by this value
7495 # option CYGPKG_ERROR_STRERROR
7496 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7499 # memcpy() implementation header
7501 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7503 # No user value, uncomment the following line to provide one.
7505 # value_source default
7506 # Default value: 0 0
7509 # memset() implementation header
7511 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7513 # No user value, uncomment the following line to provide one.
7515 # value_source default
7516 # Default value: 0 0
7519 # Number of implementations of strtok_r() function
7521 cdl_interface CYGINT_ISO_STRTOK_R {
7522 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7523 # This value cannot be modified here.
7525 # Current value: 1 1
7526 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7527 # CYGINT_ISO_STRTOK_R == 1
7530 # The following properties are affected by this value
7531 # interface CYGINT_ISO_STRTOK_R
7532 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7535 # strtok_r() implementation header
7537 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7539 # No user value, uncomment the following line to provide one.
7541 # The inferred value should not be edited directly.
7542 inferred_value 1 <cyg/libc/string/string.h>
7543 # value_source inferred
7544 # Default value: 0 0
7546 # The following properties are affected by this value
7547 # package CYGPKG_LIBC_STRING
7548 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7551 # Number of implementations of locale-specific string functions
7552 # This covers locale-dependent string functions such as strcoll()
7555 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7556 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7557 # This value cannot be modified here.
7559 # Current value: 1 1
7560 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7561 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7564 # The following properties are affected by this value
7565 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7566 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7569 # Locale-specific string functions' implementation header
7570 # This covers locale-dependent string functions such as strcoll()
7573 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7575 # No user value, uncomment the following line to provide one.
7577 # The inferred value should not be edited directly.
7578 inferred_value 1 <cyg/libc/string/string.h>
7579 # value_source inferred
7580 # Default value: 0 0
7582 # The following properties are affected by this value
7583 # package CYGPKG_LIBC_STRING
7584 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7587 # Number of implementations of BSD string functions
7589 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7590 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7591 # This value cannot be modified here.
7593 # Current value: 0 0
7594 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7595 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7598 # The following properties are affected by this value
7599 # interface CYGINT_ISO_STRING_BSD_FUNCS
7600 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7603 # BSD string functions' implementation header
7605 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7607 # No user value, uncomment the following line to provide one.
7609 # The inferred value should not be edited directly.
7610 inferred_value 1 <cyg/libc/string/bsdstring.h>
7611 # value_source inferred
7612 # Default value: 0 0
7614 # The following properties are affected by this value
7615 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7616 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7619 # Number of implementations of other mem*() functions
7621 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7622 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7623 # This value cannot be modified here.
7625 # Current value: 1 1
7626 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7627 # CYGINT_ISO_STRING_MEMFUNCS == 1
7630 # The following properties are affected by this value
7631 # interface CYGINT_ISO_STRING_MEMFUNCS
7632 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7633 # component CYGBLD_BUILD_REDBOOT
7634 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7635 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7636 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7639 # Other mem*() functions' implementation header
7641 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7643 # No user value, uncomment the following line to provide one.
7645 # The inferred value should not be edited directly.
7646 inferred_value 1 <cyg/libc/string/string.h>
7647 # value_source inferred
7648 # Default value: 0 0
7650 # The following properties are affected by this value
7651 # package CYGPKG_LIBC_STRING
7652 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7655 # Number of implementations of other ISO C str*() functions
7656 # This covers the other str*() functions defined by ISO C.
7658 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7659 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7660 # This value cannot be modified here.
7662 # Current value: 1 1
7663 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7664 # CYGINT_ISO_STRING_STRFUNCS == 1
7667 # The following properties are affected by this value
7668 # interface CYGINT_ISO_STRING_STRFUNCS
7669 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7670 # option CYGFUN_INFRA_DUMMY_STRLEN
7671 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7672 # option CYGFUN_INFRA_DUMMY_STRLEN
7673 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7674 # component CYGBLD_BUILD_REDBOOT
7675 # Requires: CYGINT_ISO_STRING_STRFUNCS
7676 # component CYGPKG_IO_ETH_DRIVERS_NET
7677 # Requires: CYGINT_ISO_STRING_STRFUNCS
7678 # option CYGFUN_COMPRESS_ZLIB_GZIO
7679 # Requires: CYGINT_ISO_STRING_STRFUNCS
7680 # package CYGPKG_IO_FLASH
7681 # Requires: CYGINT_ISO_STRING_STRFUNCS
7682 # package CYGPKG_LIBC_STDLIB
7683 # Requires: CYGINT_ISO_STRING_STRFUNCS
7686 # Other ISO C str*() functions' implementation header
7687 # This covers the other str*() functions defined by ISO C.
7689 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7691 # No user value, uncomment the following line to provide one.
7693 # The inferred value should not be edited directly.
7694 inferred_value 1 <cyg/libc/string/string.h>
7695 # value_source inferred
7696 # Default value: 0 0
7698 # The following properties are affected by this value
7699 # package CYGPKG_LIBC_STRING
7700 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7704 # Clock and time functionality
7706 cdl_component CYGPKG_ISO_TIME {
7707 # There is no associated value.
7711 # time_t implementation header
7713 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7715 # No user value, uncomment the following line to provide one.
7717 # value_source default
7718 # Default value: 0 0
7721 # clock_t implementation header
7723 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7725 # No user value, uncomment the following line to provide one.
7727 # value_source default
7728 # Default value: 0 0
7731 # struct timeval implementation header
7733 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7735 # No user value, uncomment the following line to provide one.
7737 # value_source default
7738 # Default value: 0 0
7741 # fnmatch implementation header
7743 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7745 # No user value, uncomment the following line to provide one.
7747 # value_source default
7748 # Default value: 0 0
7751 # Number of implementations of POSIX timer types
7753 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7754 # No options implement this inferface
7755 # This value cannot be modified here.
7757 # Current value: 0 0
7758 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7759 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7762 # The following properties are affected by this value
7763 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7764 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7767 # POSIX timer types implementation header
7769 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7771 # No user value, uncomment the following line to provide one.
7773 # value_source default
7774 # Default value: 0 0
7777 # Number of implementations of POSIX clock types
7779 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7780 # No options implement this inferface
7781 # This value cannot be modified here.
7783 # Current value: 0 0
7784 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7785 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7788 # The following properties are affected by this value
7789 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7790 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7793 # POSIX clock types implementation header
7795 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7797 # No user value, uncomment the following line to provide one.
7799 # value_source default
7800 # Default value: 0 0
7803 # Number of implementations of ISO C types
7805 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7806 # No options implement this inferface
7807 # This value cannot be modified here.
7809 # Current value: 0 0
7810 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7811 # CYGINT_ISO_C_TIME_TYPES == 0
7814 # The following properties are affected by this value
7815 # interface CYGINT_ISO_C_TIME_TYPES
7816 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7819 # ISO C time types implementation header
7821 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7823 # No user value, uncomment the following line to provide one.
7825 # value_source default
7826 # Default value: 0 0
7829 # Number of implementations of POSIX timers
7831 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7832 # No options implement this inferface
7833 # This value cannot be modified here.
7835 # Current value: 0 0
7836 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7837 # CYGINT_ISO_POSIX_TIMERS == 0
7840 # The following properties are affected by this value
7841 # interface CYGINT_ISO_POSIX_TIMERS
7842 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7845 # POSIX timer implementation header
7847 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7849 # No user value, uncomment the following line to provide one.
7851 # value_source default
7852 # Default value: 0 0
7855 # Number of implementations of POSIX clocks
7857 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7858 # No options implement this inferface
7859 # This value cannot be modified here.
7861 # Current value: 0 0
7862 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7863 # CYGINT_ISO_POSIX_CLOCKS == 0
7866 # The following properties are affected by this value
7867 # interface CYGINT_ISO_POSIX_CLOCKS
7868 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7871 # POSIX clocks implementation header
7873 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7875 # No user value, uncomment the following line to provide one.
7877 # value_source default
7878 # Default value: 0 0
7881 # Number of implementations of ISO C clock functions
7883 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7884 # No options implement this inferface
7885 # This value cannot be modified here.
7887 # Current value: 0 0
7888 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7889 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7892 # The following properties are affected by this value
7893 # interface CYGINT_ISO_C_CLOCK_FUNCS
7894 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7897 # ISO C clock functions' implementation header
7899 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7901 # No user value, uncomment the following line to provide one.
7903 # value_source default
7904 # Default value: 0 0
7907 # Number of implementations of tzset() function
7909 cdl_interface CYGINT_ISO_TZSET {
7910 # No options implement this inferface
7911 # This value cannot be modified here.
7913 # Current value: 0 0
7914 # Requires: 1 >= CYGINT_ISO_TZSET
7915 # CYGINT_ISO_TZSET == 0
7918 # The following properties are affected by this value
7919 # interface CYGINT_ISO_TZSET
7920 # Requires: 1 >= CYGINT_ISO_TZSET
7923 # tzset() implementation header
7925 cdl_option CYGBLD_ISO_TZSET_HEADER {
7927 # No user value, uncomment the following line to provide one.
7929 # value_source default
7930 # Default value: 0 0
7934 # Signal functionality
7936 cdl_component CYGPKG_ISO_SIGNAL {
7937 # There is no associated value.
7941 # Number of implementations of signal numbers
7943 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7944 # No options implement this inferface
7945 # This value cannot be modified here.
7948 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7949 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7952 # The following properties are affected by this value
7953 # interface CYGINT_ISO_SIGNAL_NUMBERS
7954 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7957 # Signal numbering implementation header
7958 # This header provides the mapping of signal
7959 # names (e.g. SIGBUS) to numbers.
7961 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7963 # No user value, uncomment the following line to provide one.
7965 # value_source default
7966 # Default value: 0 0
7969 # Number of signal implementations
7971 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7972 # No options implement this inferface
7973 # This value cannot be modified here.
7976 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7977 # CYGINT_ISO_SIGNAL_IMPL == 0
7980 # The following properties are affected by this value
7981 # interface CYGINT_ISO_SIGNAL_IMPL
7982 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7985 # Signals implementation header
7987 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7989 # No user value, uncomment the following line to provide one.
7991 # value_source default
7992 # Default value: 0 0
7995 # POSIX real time signals feature test macro
7996 # This defines the POSIX feature test macro
7997 # that indicates that the POSIX real time signals
8000 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
8001 # No options implement this inferface
8002 # This value cannot be modified here.
8005 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
8006 # CYGINT_POSIX_REALTIME_SIGNALS == 0
8009 # The following properties are affected by this value
8010 # interface CYGINT_POSIX_REALTIME_SIGNALS
8011 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
8015 # Non-local jumps functionality
8017 cdl_component CYGPKG_ISO_SETJMP {
8018 # There is no associated value.
8022 # setjmp() / longjmp() implementations
8024 cdl_interface CYGINT_ISO_SETJMP {
8025 # No options implement this inferface
8026 # This value cannot be modified here.
8029 # Requires: 1 >= CYGINT_ISO_SETJMP
8030 # CYGINT_ISO_SETJMP == 0
8033 # The following properties are affected by this value
8034 # interface CYGINT_ISO_SETJMP
8035 # Requires: 1 >= CYGINT_ISO_SETJMP
8038 # setjmp() / longjmp() implementation header
8040 cdl_option CYGBLD_ISO_SETJMP_HEADER {
8042 # No user value, uncomment the following line to provide one.
8044 # value_source default
8045 # Default value: 0 0
8048 # sigsetjmp() / siglongjmp() implementations
8050 cdl_interface CYGINT_ISO_SIGSETJMP {
8051 # No options implement this inferface
8052 # This value cannot be modified here.
8055 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8056 # CYGINT_ISO_SIGSETJMP == 0
8059 # The following properties are affected by this value
8060 # interface CYGINT_ISO_SIGSETJMP
8061 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8064 # sigsetjmp() / siglongjmp() implementation header
8066 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8068 # No user value, uncomment the following line to provide one.
8070 # value_source default
8071 # Default value: 0 0
8075 # Assertions implementation header
8077 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8079 # No user value, uncomment the following line to provide one.
8081 # value_source default
8082 # Default value: 0 0
8085 # POSIX file control
8086 # This covers the POSIX file control definitions,
8087 # normally found in <fcntl.h>
8089 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8090 # There is no associated value.
8094 # POSIX open flags implementation header
8096 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8098 # No user value, uncomment the following line to provide one.
8100 # value_source default
8101 # Default value: 0 0
8104 # POSIX fcntl() implementations
8106 cdl_interface CYGINT_ISO_FCNTL {
8107 # No options implement this inferface
8108 # This value cannot be modified here.
8111 # Requires: 1 >= CYGINT_ISO_FCNTL
8112 # CYGINT_ISO_FCNTL == 0
8115 # The following properties are affected by this value
8116 # interface CYGINT_ISO_FCNTL
8117 # Requires: 1 >= CYGINT_ISO_FCNTL
8120 # POSIX fcntl() implementation header
8122 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8124 # No user value, uncomment the following line to provide one.
8126 # value_source default
8127 # Default value: 0 0
8130 # POSIX file open implementations
8132 cdl_interface CYGINT_ISO_OPEN {
8133 # No options implement this inferface
8134 # This value cannot be modified here.
8137 # Requires: 1 >= CYGINT_ISO_OPEN
8138 # CYGINT_ISO_OPEN == 0
8141 # The following properties are affected by this value
8142 # interface CYGINT_ISO_OPEN
8143 # Requires: 1 >= CYGINT_ISO_OPEN
8146 # POSIX file open implementation header
8148 cdl_option CYGBLD_ISO_OPEN_HEADER {
8150 # No user value, uncomment the following line to provide one.
8152 # value_source default
8153 # Default value: 0 0
8157 # <sys/stat.h> definitions implementation header
8159 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8161 # No user value, uncomment the following line to provide one.
8163 # value_source default
8164 # Default value: 0 0
8167 # POSIX directory reading implementation
8169 cdl_interface CYGINT_ISO_DIRENT {
8170 # No options implement this inferface
8171 # This value cannot be modified here.
8174 # Requires: 1 >= CYGINT_ISO_DIRENT
8175 # CYGINT_ISO_DIRENT == 0
8178 # The following properties are affected by this value
8179 # interface CYGINT_ISO_DIRENT
8180 # Requires: 1 >= CYGINT_ISO_DIRENT
8183 # <dirent.h> definitions implementation header
8185 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8187 # No user value, uncomment the following line to provide one.
8189 # value_source default
8190 # Default value: 0 0
8193 # POSIX <sys/types.h> contents
8194 # This covers the types required by POSIX to be in
8197 cdl_component CYGPKG_ISO_POSIX_TYPES {
8198 # There is no associated value.
8202 # POSIX thread types implementations
8204 cdl_interface CYGINT_ISO_PTHREADTYPES {
8205 # No options implement this inferface
8206 # This value cannot be modified here.
8209 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8210 # CYGINT_ISO_PTHREADTYPES == 0
8213 # The following properties are affected by this value
8214 # interface CYGINT_ISO_PTHREADTYPES
8215 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8216 # interface CYGINT_ISO_PMUTEXTYPES
8217 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8220 # POSIX thread types implementation header
8222 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8224 # No user value, uncomment the following line to provide one.
8226 # value_source default
8227 # Default value: 0 0
8230 # POSIX mutex types implementations
8232 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8233 # No options implement this inferface
8234 # This value cannot be modified here.
8237 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8238 # CYGINT_ISO_PTHREADTYPES == 0
8242 # POSIX mutex types implementation header
8244 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8246 # No user value, uncomment the following line to provide one.
8248 # value_source default
8249 # Default value: 0 0
8252 # ssize_t implementation header
8254 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8256 # No user value, uncomment the following line to provide one.
8258 # value_source default
8259 # Default value: 0 0
8262 # Filesystem types implementation header
8264 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8266 # No user value, uncomment the following line to provide one.
8268 # value_source default
8269 # Default value: 0 0
8272 # gid_t, pid_t, uid_t implementation header
8274 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8276 # No user value, uncomment the following line to provide one.
8278 # value_source default
8279 # Default value: 0 0
8283 # Non-POSIX <sys/types.h> contents
8284 # This covers the extra types required by non-POSIX
8285 # packages to be in <sys/types.h>. These would normally
8286 # only be visible if _POSIX_SOURCE is not defined.
8288 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8289 # There is no associated value.
8293 # BSD compatible types
8295 cdl_interface CYGINT_ISO_BSDTYPES {
8296 # No options implement this inferface
8297 # This value cannot be modified here.
8300 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8301 # CYGINT_ISO_BSDTYPES == 0
8304 # The following properties are affected by this value
8305 # interface CYGINT_ISO_BSDTYPES
8306 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8311 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8313 # No user value, uncomment the following line to provide one.
8315 # value_source default
8316 # Default value: 0 0
8322 cdl_component CYGPKG_ISO_UTSNAME {
8323 # There is no associated value.
8329 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8331 # No user value, uncomment the following line to provide one.
8333 # value_source default
8334 # Default value: 0 0
8340 cdl_component CYGPKG_ISO_SCHED {
8341 # There is no associated value.
8345 # POSIX scheduler implementations
8347 cdl_interface CYGINT_ISO_SCHED_IMPL {
8348 # No options implement this inferface
8349 # This value cannot be modified here.
8352 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8353 # CYGINT_ISO_SCHED_IMPL == 0
8356 # The following properties are affected by this value
8357 # interface CYGINT_ISO_SCHED_IMPL
8358 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8361 # POSIX scheduler implementation header
8363 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8365 # No user value, uncomment the following line to provide one.
8367 # value_source default
8368 # Default value: 0 0
8374 cdl_component CYGPKG_ISO_SEMAPHORES {
8375 # There is no associated value.
8379 # POSIX semaphore implementations
8381 cdl_interface CYGINT_ISO_SEMAPHORES {
8382 # No options implement this inferface
8383 # This value cannot be modified here.
8386 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8387 # CYGINT_ISO_SEMAPHORES == 0
8390 # The following properties are affected by this value
8391 # interface CYGINT_ISO_SEMAPHORES
8392 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8395 # POSIX semaphore implementation header
8397 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8399 # No user value, uncomment the following line to provide one.
8401 # value_source default
8402 # Default value: 0 0
8406 # POSIX message queues
8408 cdl_component CYGPKG_ISO_MQUEUE {
8409 # There is no associated value.
8415 cdl_interface CYGINT_ISO_MQUEUE {
8416 # No options implement this inferface
8417 # This value cannot be modified here.
8420 # Requires: 1 >= CYGINT_ISO_MQUEUE
8421 # CYGINT_ISO_MQUEUE == 0
8424 # The following properties are affected by this value
8425 # interface CYGINT_ISO_MQUEUE
8426 # Requires: 1 >= CYGINT_ISO_MQUEUE
8427 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8428 # ActiveIf: CYGINT_ISO_MQUEUE
8429 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8430 # ActiveIf: CYGINT_ISO_MQUEUE
8433 # Implementation header
8435 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8437 # No user value, uncomment the following line to provide one.
8439 # value_source default
8440 # Default value: 0 0
8443 # Maximum number of open message queues
8445 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8446 # This option is not active
8447 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8448 # CYGINT_ISO_MQUEUE == 0
8452 # No user value, uncomment the following line to provide one.
8454 # value_source default
8455 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8456 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8457 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8461 # Maximum number of message priorities
8463 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8464 # This option is not active
8465 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8466 # CYGINT_ISO_MQUEUE == 0
8470 # No user value, uncomment the following line to provide one.
8471 # user_value 1 65535
8472 # value_source default
8473 # Default value: 1 65535
8479 cdl_component CYGPKG_ISO_PTHREAD {
8480 # There is no associated value.
8484 # POSIX pthread implementations
8486 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8487 # No options implement this inferface
8488 # This value cannot be modified here.
8490 # Current value: 0 0
8491 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8492 # CYGINT_ISO_PTHREAD_IMPL == 0
8495 # The following properties are affected by this value
8496 # interface CYGINT_ISO_PTHREAD_IMPL
8497 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8500 # POSIX pthread implementation header
8502 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8504 # No user value, uncomment the following line to provide one.
8506 # value_source default
8507 # Default value: 0 0
8510 # POSIX mutex/cond var implementations
8512 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8513 # No options implement this inferface
8514 # This value cannot be modified here.
8516 # Current value: 0 0
8517 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8518 # CYGINT_ISO_PTHREAD_MUTEX == 0
8521 # The following properties are affected by this value
8522 # interface CYGINT_ISO_PTHREAD_MUTEX
8523 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8526 # POSIX mutex/cond var implementation header
8528 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8530 # No user value, uncomment the following line to provide one.
8532 # value_source default
8533 # Default value: 0 0
8539 cdl_component CYGPKG_ISO_LIMITS {
8540 # There is no associated value.
8544 # POSIX pthread limits implementations
8546 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8547 # No options implement this inferface
8548 # This value cannot be modified here.
8551 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8552 # CYGINT_ISO_POSIX_LIMITS == 0
8555 # The following properties are affected by this value
8556 # interface CYGINT_ISO_POSIX_LIMITS
8557 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8560 # POSIX pthread limits implementation header
8562 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8564 # No user value, uncomment the following line to provide one.
8566 # value_source default
8567 # Default value: 0 0
8570 # OPEN_MAX implementation header
8572 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8574 # No user value, uncomment the following line to provide one.
8576 # value_source default
8577 # Default value: 0 0
8580 # LINK_MAX implementation header
8582 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8584 # No user value, uncomment the following line to provide one.
8586 # value_source default
8587 # Default value: 0 0
8590 # NAME_MAX implementation header
8592 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8594 # No user value, uncomment the following line to provide one.
8596 # value_source default
8597 # Default value: 0 0
8600 # PATH_MAX implementation header
8602 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8604 # No user value, uncomment the following line to provide one.
8606 # value_source default
8607 # Default value: 0 0
8613 cdl_component CYGPKG_ISO_TERMIOS {
8614 # There is no associated value.
8618 # POSIX termios implementations
8620 cdl_interface CYGINT_ISO_TERMIOS {
8621 # No options implement this inferface
8622 # This value cannot be modified here.
8625 # Requires: 1 >= CYGINT_ISO_TERMIOS
8626 # CYGINT_ISO_TERMIOS == 0
8629 # The following properties are affected by this value
8630 # interface CYGINT_ISO_TERMIOS
8631 # Requires: 1 >= CYGINT_ISO_TERMIOS
8634 # POSIX termios implementation header
8636 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8638 # No user value, uncomment the following line to provide one.
8640 # value_source default
8641 # Default value: 0 0
8647 cdl_component CYGPKG_ISO_DLFCN {
8648 # There is no associated value.
8652 # Dynamic load implementations
8654 cdl_interface CYGINT_ISO_DLFCN {
8655 # No options implement this inferface
8656 # This value cannot be modified here.
8659 # Requires: 1 >= CYGINT_ISO_DLFCN
8660 # CYGINT_ISO_DLFCN == 0
8663 # The following properties are affected by this value
8664 # interface CYGINT_ISO_DLFCN
8665 # Requires: 1 >= CYGINT_ISO_DLFCN
8668 # Dynamic load implementation header
8670 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8672 # No user value, uncomment the following line to provide one.
8674 # value_source default
8675 # Default value: 0 0
8679 # UNIX standard functions
8681 cdl_component CYGPKG_ISO_UNISTD {
8682 # There is no associated value.
8686 # POSIX timer operations implementations
8688 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8689 # No options implement this inferface
8690 # This value cannot be modified here.
8692 # Current value: 0 0
8693 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8694 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8697 # The following properties are affected by this value
8698 # interface CYGINT_ISO_POSIX_TIMER_OPS
8699 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8702 # POSIX timer operations implementation header
8704 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8706 # No user value, uncomment the following line to provide one.
8708 # value_source default
8709 # Default value: 0 0
8712 # POSIX sleep() implementations
8714 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8715 # No options implement this inferface
8716 # This value cannot be modified here.
8718 # Current value: 0 0
8719 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8720 # CYGINT_ISO_POSIX_SLEEP == 0
8723 # The following properties are affected by this value
8724 # interface CYGINT_ISO_POSIX_SLEEP
8725 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8728 # POSIX sleep() implementation header
8730 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8732 # No user value, uncomment the following line to provide one.
8734 # value_source default
8735 # Default value: 0 0
8739 # select()/poll() functions
8741 cdl_component CYGPKG_ISO_SELECT {
8742 # There is no associated value.
8746 # select() implementations
8748 cdl_interface CYGINT_ISO_SELECT {
8749 # No options implement this inferface
8750 # This value cannot be modified here.
8752 # Current value: 0 0
8753 # Requires: 1 >= CYGINT_ISO_SELECT
8754 # CYGINT_ISO_SELECT == 0
8757 # The following properties are affected by this value
8758 # interface CYGINT_ISO_SELECT
8759 # Requires: 1 >= CYGINT_ISO_SELECT
8762 # select() implementation header
8764 cdl_option CYGBLD_ISO_SELECT_HEADER {
8766 # No user value, uncomment the following line to provide one.
8768 # value_source default
8769 # Default value: 0 0
8772 # poll() implementations
8774 cdl_interface CYGINT_ISO_POLL {
8775 # No options implement this inferface
8776 # This value cannot be modified here.
8778 # Current value: 0 0
8779 # Requires: 1 >= CYGINT_ISO_POLL
8780 # CYGINT_ISO_POLL == 0
8783 # The following properties are affected by this value
8784 # interface CYGINT_ISO_POLL
8785 # Requires: 1 >= CYGINT_ISO_POLL
8788 # poll() implementation header
8790 cdl_option CYGBLD_ISO_POLL_HEADER {
8792 # No user value, uncomment the following line to provide one.
8794 # value_source default
8795 # Default value: 0 0
8799 # NetDB utility functions
8801 cdl_component CYGPKG_ISO_NETDB {
8802 # There is no associated value.
8806 # DNS implementations
8808 cdl_interface CYGINT_ISO_DNS {
8809 # No options implement this inferface
8810 # This value cannot be modified here.
8813 # Requires: 1 >= CYGINT_ISO_DNS
8814 # CYGINT_ISO_DNS == 0
8817 # The following properties are affected by this value
8818 # interface CYGINT_ISO_DNS
8819 # Requires: 1 >= CYGINT_ISO_DNS
8822 # DNS implementation header
8824 cdl_option CYGBLD_ISO_DNS_HEADER {
8826 # No user value, uncomment the following line to provide one.
8828 # value_source default
8829 # Default value: 0 0
8832 # Protocol network database implementations
8834 cdl_interface CYGINT_ISO_NETDB_PROTO {
8835 # No options implement this inferface
8836 # This value cannot be modified here.
8839 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8840 # CYGINT_ISO_NETDB_PROTO == 0
8843 # The following properties are affected by this value
8844 # interface CYGINT_ISO_NETDB_PROTO
8845 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8848 # Protocol network database implementation header
8850 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8852 # No user value, uncomment the following line to provide one.
8854 # value_source default
8855 # Default value: 0 0
8858 # Services network database implementations
8860 cdl_interface CYGINT_ISO_NETDB_SERV {
8861 # No options implement this inferface
8862 # This value cannot be modified here.
8865 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8866 # CYGINT_ISO_NETDB_SERV == 0
8869 # The following properties are affected by this value
8870 # interface CYGINT_ISO_NETDB_SERV
8871 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8874 # Services network database implementation header
8876 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8878 # No user value, uncomment the following line to provide one.
8880 # value_source default
8881 # Default value: 0 0
8886 # Package specific build options including control over
8887 # compiler flags used only in building this package,
8888 # and details of which tests are built.
8890 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8891 # There is no associated value.
8895 # Additional compiler flags
8896 # This option modifies the set of compiler flags for
8897 # building the ISO C and POSIX infrastructure package.
8898 # These flags are used in addition to the set of global flags.
8900 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8902 # No user value, uncomment the following line to provide one.
8904 # value_source default
8908 # Suppressed compiler flags
8909 # This option modifies the set of compiler flags for
8910 # building the ISO C and POSIX infrastructure package.
8911 # These flags are removed from the set of global flags
8914 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8916 # No user value, uncomment the following line to provide one.
8918 # value_source default
8925 # doc: ref/services-crc.html
8926 # This package provides support for CRC calculation. Currently
8927 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8928 # Gary S. Brown, and a 16 bit CRC.
8930 cdl_package CYGPKG_CRC {
8931 # Packages cannot be added or removed, nor can their version be changed,
8932 # simply by editing their value. Instead the appropriate configuration
8933 # should be used to perform these actions.
8935 # This value cannot be modified here.
8937 # Current value: 1 current
8939 # The following properties are affected by this value
8940 # package CYGPKG_COMPRESS_ZLIB
8941 # Requires: CYGPKG_CRC
8947 cdl_option CYGPKG_CRC_TESTS {
8948 # Calculated value: "tests/crc_test"
8950 # Current_value: tests/crc_test
8954 # Zlib compress and decompress package
8955 # This package provides support for compression and
8958 cdl_package CYGPKG_COMPRESS_ZLIB {
8959 # Packages cannot be added or removed, nor can their version be changed,
8960 # simply by editing their value. Instead the appropriate configuration
8961 # should be used to perform these actions.
8963 # This value cannot be modified here.
8965 # Current value: 1 current
8966 # Requires: CYGPKG_ISOINFRA
8967 # CYGPKG_ISOINFRA == current
8969 # Requires: CYGPKG_CRC
8970 # CYGPKG_CRC == current
8973 # The following properties are affected by this value
8974 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8975 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8979 # Override memory allocation routines.
8981 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8982 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8983 # This value cannot be modified here.
8987 # The following properties are affected by this value
8988 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8989 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8992 # Should deflate() produce 'gzip' compatible output?
8993 # If this option is set then the output of calling deflate()
8994 # will be wrapped up as a 'gzip' compatible file.
8996 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8998 # No user value, uncomment the following line to provide one.
9000 # value_source default
9004 # Does this library need malloc?
9005 # This pseudo-option will force the memalloc library to be
9006 # required iff the application does not provide it's own
9009 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
9010 # This option is not active
9011 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
9012 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
9016 # No user value, uncomment the following line to provide one.
9018 # value_source default
9020 # Requires: CYGPKG_MEMALLOC
9021 # CYGPKG_MEMALLOC == current
9025 # Include stdio-like utility functions
9026 # This option enables the stdio-like zlib utility functions
9027 # (gzread/gzwrite and friends) provided in gzio.c.
9029 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
9031 # No user value, uncomment the following line to provide one.
9033 # value_source default
9034 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
9035 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
9037 # Requires: CYGINT_ISO_STDIO_FILEPOS
9038 # CYGINT_ISO_STDIO_FILEPOS == 0
9040 # Requires: CYGINT_ISO_STRING_STRFUNCS
9041 # CYGINT_ISO_STRING_STRFUNCS == 1
9043 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
9044 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
9046 # Requires: CYGINT_ISO_STDIO_FILEACCESS
9047 # CYGINT_ISO_STDIO_FILEACCESS == 0
9051 # Zlib compress and decompress package build options
9052 # Package specific build options including control over
9053 # compiler flags used only in building this package,
9054 # and details of which tests are built.
9056 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9057 # There is no associated value.
9061 # Additional compiler flags
9062 # This option modifies the set of compiler flags for
9063 # building this package. These flags are used in addition
9064 # to the set of global flags.
9066 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9068 # No user value, uncomment the following line to provide one.
9069 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9070 # value_source default
9071 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9074 # Suppressed compiler flags
9075 # This option modifies the set of compiler flags for
9076 # building this package. These flags are removed from
9077 # the set of global flags if present.
9079 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9081 # No user value, uncomment the following line to provide one.
9082 # user_value -Wstrict-prototypes
9083 # value_source default
9084 # Default value: -Wstrict-prototypes
9087 # Additional compiler flags
9088 # This option modifies the set of compiler flags for
9089 # building this package. These flags are used in addition
9090 # to the set of global flags.
9092 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9094 # No user value, uncomment the following line to provide one.
9096 # value_source default
9100 # Suppressed compiler flags
9101 # This option modifies the set of compiler flags for
9102 # building this package. These flags are removed from
9103 # the set of global flags if present.
9105 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9107 # No user value, uncomment the following line to provide one.
9109 # value_source default
9116 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9117 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9119 # Current_value: tests/zlib1.c tests/zlib2.c
9123 # FLASH device drivers
9124 # doc: ref/flash.html
9125 # This option enables drivers for basic I/O services on
9128 cdl_package CYGPKG_IO_FLASH {
9129 # Packages cannot be added or removed, nor can their version be changed,
9130 # simply by editing their value. Instead the appropriate configuration
9131 # should be used to perform these actions.
9133 # This value cannot be modified here.
9135 # Current value: 1 current
9136 # Requires: CYGPKG_ISOINFRA
9137 # CYGPKG_ISOINFRA == current
9139 # Requires: CYGINT_ISO_STRING_STRFUNCS
9140 # CYGINT_ISO_STRING_STRFUNCS == 1
9143 # The following properties are affected by this value
9144 # component CYGSEM_REDBOOT_FLASH_CONFIG
9145 # DefaultValue: CYGPKG_IO_FLASH != 0
9146 # package CYGPKG_DEVS_FLASH_ONMXC
9147 # ActiveIf: CYGPKG_IO_FLASH
9151 # Hardware FLASH device drivers
9152 # This option enables the hardware device drivers
9153 # for the current platform.
9155 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9156 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9157 # This value cannot be modified here.
9161 # The following properties are affected by this value
9162 # component CYGPKG_REDBOOT_FLASH
9163 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9166 # Hardware FLASH device drivers are not in RAM
9167 # Use of this interface is deprecated.
9168 # Drivers should make sure that the functions are
9169 # linked to RAM by putting them in .2ram sections.
9171 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9172 # No options implement this inferface
9173 # This value cannot be modified here.
9175 # Current value: 0 0
9176 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9177 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9180 # The following properties are affected by this value
9181 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9182 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9185 # Hardware can support block locking
9186 # This option will be enabled by devices which can support
9187 # locking (write-protection) of individual blocks.
9189 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9190 # No options implement this inferface
9191 # This value cannot be modified here.
9193 # Current value: 0 0
9195 # The following properties are affected by this value
9196 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9197 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9200 # Hardware cannot support direct access to FLASH memory
9201 # This option will be asserted by devices which cannot support
9202 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9203 # devices). In these cases, the driver must provide an appropriate
9204 # hardware access function.
9206 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9208 # No user value, uncomment the following line to provide one.
9210 # The inferred value should not be edited directly.
9212 # value_source inferred
9214 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9215 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9218 # The following properties are affected by this value
9219 # option CYGPRI_REDBOOT_ZLIB_FLASH
9220 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9221 # component CYGHWR_DEVS_FLASH_MMC
9222 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9223 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9224 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9225 # option CYGHWR_DEVS_FLASH_MMC_SD
9226 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9227 # option CYGHWR_DEVS_FLASH_MXC_NAND
9228 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9231 # Display status messages during flash operations
9232 # Selecting this option will cause the drivers to print status
9233 # messages as various flash operations are undertaken.
9235 cdl_option CYGSEM_IO_FLASH_CHATTER {
9237 # No user value, uncomment the following line to provide one.
9239 # value_source default
9243 # Verify data programmed to flash
9244 # Selecting this option will cause verification of data
9245 # programmed to flash.
9247 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9249 # No user value, uncomment the following line to provide one.
9251 # The inferred value should not be edited directly.
9253 # value_source inferred
9256 # The following properties are affected by this value
9257 # option CYGSEM_IO_FLASH_READ_INDIRECT
9258 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9261 # Platform has flash soft DIP switch write-protect
9262 # Selecting this option will cause the state of a hardware jumper or
9263 # dipswitch to be read by software to determine whether the flash is
9264 # write-protected or not.
9266 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9268 # No user value, uncomment the following line to provide one.
9270 # value_source default
9274 # Instantiate in I/O block device API
9275 # Provides a block device accessible using the standard I/O
9276 # API ( cyg_io_read() etc. )
9278 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9279 # This option is not active
9280 # ActiveIf constraint: CYGPKG_IO
9281 # CYGPKG_IO (unknown) == 0
9285 # No user value, uncomment the following line to provide one.
9287 # value_source default
9292 # Name of flash device 1 block device
9294 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9295 # This option is not active
9296 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9297 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9300 # No user value, uncomment the following line to provide one.
9301 # user_value "\"/dev/flash1\""
9302 # value_source default
9303 # Default value: "\"/dev/flash1\""
9308 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9309 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9310 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9311 # This option is not active
9312 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9314 # This value cannot be modified here.
9317 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9318 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9321 # The following properties are affected by this value
9322 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9323 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9326 # Static configuration
9327 # This configures the flash device 1 block device
9328 # with static base and length
9330 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9331 # This option is not active
9332 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9335 # No user value, uncomment the following line to provide one.
9337 # value_source default
9342 # Start offset from flash base
9343 # This gives the offset from the base of flash which this
9344 # block device corresponds to.
9346 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9347 # This option is not active
9348 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9351 # No user value, uncomment the following line to provide one.
9352 # user_value 0x00100000
9353 # value_source default
9354 # Default value: 0x00100000
9358 # This gives the length of the region of flash given over
9359 # to this block device.
9361 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9362 # This option is not active
9363 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9366 # No user value, uncomment the following line to provide one.
9367 # user_value 0x00100000
9368 # value_source default
9369 # Default value: 0x00100000
9373 # Configuration from FIS
9374 # This configures the flash device 1 block device
9377 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9378 # This option is not active
9379 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9382 # No user value, uncomment the following line to provide one.
9384 # value_source default
9391 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9392 # This option is not active
9393 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9394 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9397 # No user value, uncomment the following line to provide one.
9398 # user_value "\"jffs2\""
9399 # value_source default
9400 # Default value: "\"jffs2\""
9406 # Flash device driver build options
9407 # Package specific build options including control over
9408 # compiler flags used only in building this package,
9409 # and details of which tests are built.
9411 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9412 # There is no associated value.
9416 # Additional compiler flags
9417 # This option modifies the set of compiler flags for
9418 # building the flash device drivers. These flags are used in addition
9419 # to the set of global flags.
9421 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9423 # No user value, uncomment the following line to provide one.
9425 # value_source default
9429 # Suppressed compiler flags
9430 # This option modifies the set of compiler flags for
9431 # building the flash device drivers. These flags are removed from
9432 # the set of global flags if present.
9434 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9436 # No user value, uncomment the following line to provide one.
9438 # value_source default
9442 # Flash device driver tests
9443 # This option specifies the set of tests for the flash device drivers.
9445 cdl_component CYGPKG_IO_FLASH_TESTS {
9446 # Calculated value: "tests/flash1"
9448 # Current_value: tests/flash1
9452 # Start offset from flash base
9453 # This gives the offset from the base of flash where tests
9454 # can be run. It is important to set this correctly, as an
9455 # incorrect value could allow the tests to write over critical
9456 # portions of the FLASH device and possibly render the target
9457 # board totally non-functional.
9459 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9461 # No user value, uncomment the following line to provide one.
9462 # user_value 0x00100000
9463 # value_source default
9464 # Default value: 0x00100000
9468 # This gives the length of the region of flash used for testing.
9470 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9472 # No user value, uncomment the following line to provide one.
9473 # user_value 0x00100000
9474 # value_source default
9475 # Default value: 0x00100000
9480 # Support FLASH memory on Freescale MXC platforms
9482 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9483 # Packages cannot be added or removed, nor can their version be changed,
9484 # simply by editing their value. Instead the appropriate configuration
9485 # should be used to perform these actions.
9487 # ActiveIf constraint: CYGPKG_IO_FLASH
9488 # CYGPKG_IO_FLASH == current
9491 # This value cannot be modified here.
9493 # Current value: 1 current
9497 # MXC platform MMC card support
9498 # When this option is enabled, it indicates MMC card is
9499 # supported on the MXC platforms
9501 cdl_component CYGHWR_DEVS_FLASH_MMC {
9503 # No user value, uncomment the following line to provide one.
9505 # value_source default
9507 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9508 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9511 # The following properties are affected by this value
9512 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9513 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9514 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9515 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9516 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9517 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9518 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9519 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9523 # MXC platform MMC card for newer SDHC controllers
9525 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9526 # This option is not active
9527 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9528 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9529 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9530 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9531 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9532 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9533 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9534 # CYGPKG_HAL_ARM_MX53 == current
9538 # No user value, uncomment the following line to provide one.
9540 # value_source default
9542 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9543 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9547 # MXC platform MMC card for older MMC/SD controllers
9549 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9550 # This option is not active
9551 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9552 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9553 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9554 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9558 # No user value, uncomment the following line to provide one.
9560 # value_source default
9562 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9563 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9568 # MXC platform NOR flash memory support
9569 # When this option is enabled, it indicates NOR flash is
9570 # supported on the MXC platforms
9572 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9574 # No user value, uncomment the following line to provide one.
9576 # The inferred value should not be edited directly.
9578 # value_source inferred
9581 # The following properties are affected by this value
9582 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9583 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9584 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9585 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9586 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9587 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9588 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9589 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9590 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9591 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9594 # MXC platform NAND flash memory support
9595 # When this option is enabled, it indicates NAND flash is
9596 # supported on the MXC platforms
9598 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9600 # No user value, uncomment the following line to provide one.
9602 # The inferred value should not be edited directly.
9604 # value_source inferred
9606 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9607 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9610 # The following properties are affected by this value
9611 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9612 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9613 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9614 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9615 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9616 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9617 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9618 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9619 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9620 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9621 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9622 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9625 # i.MX platform SPI NOR flash memory support
9626 # When this option is enabled, it indicates SPI NOR flash is
9627 # supported on the i.MX platforms
9629 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9631 # No user value, uncomment the following line to provide one.
9633 # value_source default
9635 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9636 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9640 # MXC platform ATA support
9641 # When this option is enabled, it indicates ATA is
9642 # supported on the MXC platforms
9644 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9646 # No user value, uncomment the following line to provide one.
9648 # value_source default
9652 # Use a flash based Bad Block Table
9654 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9655 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9656 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9659 # There is no associated value.
9663 # When this option is enabled, the driver will search for a flash
9664 # based bad block table
9666 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9668 # No user value, uncomment the following line to provide one.
9670 # value_source default
9674 # header file defining the NAND BBT descriptor
9675 # defines the name of the header file that describes the BBT layout
9677 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9679 # No user value, uncomment the following line to provide one.
9681 # The inferred value should not be edited directly.
9682 inferred_value 1 <cyg/io/tx53_nand_bbt.h>
9683 # value_source inferred
9684 # Default value: 0 0
9687 # Number of blocks to reserve for BBT
9688 # Number of blocks to reserve for BBT
9690 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9692 # No user value, uncomment the following line to provide one.
9694 # value_source default
9699 # MXC platform multi flash memory support
9700 # When this option is enabled, it indicates multi flashes are
9701 # supported on the MXC platforms (like NAND and NOR)
9703 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9704 # This option is not active
9705 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9706 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9707 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9708 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9709 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9710 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9711 # CYGHWR_DEVS_FLASH_MMC == 0
9712 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9713 # CYGHWR_DEVS_FLASH_MMC == 0
9717 # No user value, uncomment the following line to provide one.
9719 # The inferred value should not be edited directly.
9721 # value_source inferred
9725 # MXC platform NAND flash reset workaround support
9726 # When this option is enabled, it indicates 0xFFFF is used for
9727 # the NAND reset command instead of 0xFF.
9729 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9730 # No options implement this inferface
9731 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9732 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9735 # This value cannot be modified here.
9742 # Dynamic memory allocation
9743 # doc: ref/memalloc.html
9744 # This package provides memory allocator infrastructure required for
9745 # dynamic memory allocators, including the ISO standard malloc
9746 # interface. It also contains some sample implementations.
9748 cdl_package CYGPKG_MEMALLOC {
9749 # Packages cannot be added or removed, nor can their version be changed,
9750 # simply by editing their value. Instead the appropriate configuration
9751 # should be used to perform these actions.
9753 # This value cannot be modified here.
9755 # Current value: 1 current
9757 # The following properties are affected by this value
9758 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9759 # Requires: CYGPKG_MEMALLOC
9763 # Memory allocator implementations
9764 # This component contains configuration options related to the
9765 # various memory allocators available.
9767 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9768 # There is no associated value.
9772 # Fixed block allocator
9773 # This component contains configuration options related to the
9774 # fixed block memory allocator.
9776 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9777 # There is no associated value.
9782 # With this option enabled, this allocator will be
9783 # made thread-safe. Additionally allocation functions
9784 # are made available that allow a thread to wait
9785 # until memory is available.
9787 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9788 # This option is not active
9789 # ActiveIf constraint: CYGPKG_KERNEL
9790 # CYGPKG_KERNEL (unknown) == 0
9794 # No user value, uncomment the following line to provide one.
9796 # value_source default
9801 # Simple variable block allocator
9802 # This component contains configuration options related to the
9803 # simple variable block memory allocator. This allocator is not
9804 # very fast, and in particular does not scale well with large
9805 # numbers of allocations. It is however very compact in terms of
9806 # code size and does not have very much overhead per allocation.
9808 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9809 # There is no associated value.
9814 # With this option enabled, this allocator will be
9815 # made thread-safe. Additionally allocation functions
9816 # are added that allow a thread to wait until memory
9817 # are made available that allow a thread to wait
9818 # until memory is available.
9820 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9821 # This option is not active
9822 # ActiveIf constraint: CYGPKG_KERNEL
9823 # CYGPKG_KERNEL (unknown) == 0
9827 # No user value, uncomment the following line to provide one.
9829 # value_source default
9834 # The variable-block memory allocator can perform coalescing
9835 # of memory whenever the application code releases memory back
9836 # to the pool. This coalescing reduces the possibility of
9837 # memory fragmentation problems, but involves extra code and
9840 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9842 # No user value, uncomment the following line to provide one.
9844 # value_source default
9847 # The following properties are affected by this value
9848 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9849 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9854 # This component contains configuration options related to the
9855 # port of Doug Lea's memory allocator, normally known as
9856 # dlmalloc. dlmalloc has a reputation for being both fast
9857 # and space-conserving, as well as resisting fragmentation well.
9858 # It is a common choice for a general purpose allocator and
9859 # has been used in both newlib and Linux glibc.
9861 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9862 # There is no associated value.
9867 # Doug Lea's malloc implementation has substantial amounts
9868 # of internal checking in order to verify the operation
9869 # and consistency of the allocator. However this imposes
9870 # substantial overhead on each operation. Therefore this
9871 # checking may be individually disabled.
9873 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9875 # No user value, uncomment the following line to provide one.
9877 # value_source default
9878 # Default value: 0 != CYGDBG_USE_ASSERTS
9879 # CYGDBG_USE_ASSERTS == 0
9881 # Requires: CYGDBG_USE_ASSERTS
9882 # CYGDBG_USE_ASSERTS == 0
9887 # With this option enabled, this allocator will be
9888 # made thread-safe. Additionally allocation functions
9889 # are made available that allow a thread to wait
9890 # until memory is available.
9892 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9893 # This option is not active
9894 # ActiveIf constraint: CYGPKG_KERNEL
9895 # CYGPKG_KERNEL (unknown) == 0
9899 # No user value, uncomment the following line to provide one.
9901 # value_source default
9903 # Requires: CYGPKG_KERNEL
9904 # CYGPKG_KERNEL (unknown) == 0
9908 # Support more than one instance
9909 # Having this option disabled allows important
9910 # implementation structures to be declared as a single
9911 # static instance, allowing faster access. However this
9912 # would fail if there is more than one instance of
9913 # the dlmalloc allocator class. Therefore this option can
9914 # be enabled if multiple instances are required. Note: as
9915 # a special case, if this allocator is used as the
9916 # implementation of malloc, and it can be determined there
9917 # is more than one malloc pool, then this option will be
9920 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9922 # No user value, uncomment the following line to provide one.
9924 # value_source default
9928 # Use system memmove() and memset()
9929 # This may be used to control whether memset() and memmove()
9930 # are used within the implementation. The alternative is
9931 # to use some macro equivalents, which some people report
9932 # are faster in some circumstances.
9934 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9936 # No user value, uncomment the following line to provide one.
9938 # value_source default
9939 # Default value: 0 != CYGPKG_ISOINFRA
9940 # CYGPKG_ISOINFRA == current
9942 # Requires: CYGPKG_ISOINFRA
9943 # CYGPKG_ISOINFRA == current
9947 # Minimum alignment of allocated blocks
9948 # This option controls the minimum alignment that the
9949 # allocated memory blocks are aligned on, specified as
9950 # 2^N. Note that using large mininum alignments can lead
9951 # to excessive memory wastage.
9953 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9955 # No user value, uncomment the following line to provide one.
9957 # value_source default
9959 # Legal values: 3 to 10
9963 # Variable block allocator with separate metadata
9964 # This component contains configuration options related to the
9965 # variable block memory allocator with separate metadata.
9967 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9968 # There is no associated value.
9973 # With this option enabled, this allocator will be
9974 # made thread-safe. Additionally allocation functions
9975 # are made available that allow a thread to wait
9976 # until memory is available.
9978 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9979 # This option is not active
9980 # ActiveIf constraint: CYGPKG_KERNEL
9981 # CYGPKG_KERNEL (unknown) == 0
9985 # No user value, uncomment the following line to provide one.
9987 # value_source default
9993 # Kernel C API support for memory allocation
9994 # This option must be enabled to provide the extensions required
9995 # to support integration into the kernel C API.
9997 cdl_option CYGFUN_MEMALLOC_KAPI {
9998 # This option is not active
9999 # ActiveIf constraint: CYGPKG_KERNEL
10000 # CYGPKG_KERNEL (unknown) == 0
10004 # No user value, uncomment the following line to provide one.
10006 # value_source default
10007 # Default value: CYGFUN_KERNEL_API_C
10008 # CYGFUN_KERNEL_API_C (unknown) == 0
10012 # malloc(0) returns NULL
10013 # This option controls the behavior of malloc(0) ( or calloc with
10014 # either argument 0 ). It is permitted by the standard to return
10015 # either a NULL pointer or a unique pointer. Enabling this option
10016 # forces a NULL pointer to be returned.
10018 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
10020 # No user value, uncomment the following line to provide one.
10022 # value_source default
10026 # Breakpoint site when running out of memory
10027 # Whenever the system runs out of memory, it invokes this function
10028 # before either going to sleep waiting for memory to become
10029 # available or returning failure.
10031 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
10033 # No user value, uncomment the following line to provide one.
10035 # value_source default
10039 # malloc() and supporting allocators
10040 # This component enables support for dynamic memory
10041 # allocation as supplied by the functions malloc(),
10042 # free(), calloc() and realloc(). As these
10043 # functions are often used, but can have quite an
10044 # overhead, disabling them here can ensure they
10045 # cannot even be used accidentally when static
10046 # allocation is preferred. Within this component are
10047 # various allocators that can be selected for use
10048 # as the underlying implementation of the dynamic
10049 # allocation functions.
10051 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10052 # ActiveIf constraint: CYGPKG_ISOINFRA
10053 # CYGPKG_ISOINFRA == current
10057 # No user value, uncomment the following line to provide one.
10059 # value_source default
10064 # Use external heap definition
10065 # This option allows other components in the
10066 # system to override the default system
10067 # provision of heap memory pools. This should
10068 # be set to a header which provides the equivalent
10069 # definitions to <pkgconf/heaps.hxx>.
10071 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10073 # No user value, uncomment the following line to provide one.
10075 # value_source default
10076 # Default value: 0 0
10079 # Use external implementation of joining multiple heaps
10080 # The default implementation of joining multiple heaps
10081 # is fine for the case where there are multiple disjoint
10082 # memory regions of the same type. However, in a system
10083 # there might be e.g. a small amount of internal SRAM and
10084 # a large amount of external DRAM. The SRAM is faster and
10085 # the DRAM is slower. An application can implement some
10086 # heuristic to choose which pool to allocate from. This
10087 # heuristic can be highly application specific.
10089 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10091 # No user value, uncomment the following line to provide one.
10093 # value_source default
10094 # Default value: 0 0
10097 # malloc() allocator implementations
10099 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10100 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10101 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10102 # This value cannot be modified here.
10105 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10106 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10109 # The following properties are affected by this value
10110 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10111 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10114 # malloc() implementation instantiation data
10115 # Memory allocator implementations that are capable of being
10116 # used underneath malloc() must be instantiated. The code
10117 # to do this is set in this option. It is only intended to
10118 # be set by the implementation, not the user.
10120 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10122 # No user value, uncomment the following line to provide one.
10123 # user_value <cyg/memalloc/dlmalloc.hxx>
10124 # value_source default
10125 # Default value: <cyg/memalloc/dlmalloc.hxx>
10127 # The following properties are affected by this value
10128 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10129 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10130 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10131 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10134 # Simple variable block implementation
10135 # This causes malloc() to use the simple
10136 # variable block allocator.
10138 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10140 # No user value, uncomment the following line to provide one.
10142 # value_source default
10144 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10145 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10147 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10148 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10152 # Doug Lea's malloc implementation
10153 # This causes malloc() to use a version of Doug Lea's
10154 # malloc (dlmalloc) as the underlying implementation.
10156 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10158 # No user value, uncomment the following line to provide one.
10160 # value_source default
10162 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10163 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10168 # Size of the fallback dynamic memory pool in bytes
10169 # If *no* heaps are configured in your memory layout,
10170 # dynamic memory allocation by
10171 # malloc() and calloc() must be from a fixed-size,
10172 # contiguous memory pool (note here that it is the
10173 # pool that is of a fixed size, but malloc() is still
10174 # able to allocate variable sized chunks of memory
10175 # from it). This option is the size
10176 # of that pool, in bytes. Note that not all of
10177 # this is available for programs to
10178 # use - some is needed for internal information
10179 # about memory regions, and some may be lost to
10180 # ensure that memory allocation only returns
10181 # memory aligned on word (or double word)
10182 # boundaries - a very common architecture
10185 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10187 # No user value, uncomment the following line to provide one.
10189 # value_source default
10190 # Default value: 16384
10191 # Legal values: 32 to 0x7fffffff
10194 # Common memory allocator package build options
10195 # Package specific build options including control over
10196 # compiler flags used only in building this package,
10197 # and details of which tests are built.
10199 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10200 # There is no associated value.
10204 # Additional compiler flags
10205 # This option modifies the set of compiler flags for
10206 # building this package. These flags are used in addition
10207 # to the set of global flags.
10209 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10211 # No user value, uncomment the following line to provide one.
10212 # user_value "-fno-rtti -Woverloaded-virtual"
10213 # value_source default
10214 # Default value: "-fno-rtti -Woverloaded-virtual"
10217 # Suppressed compiler flags
10218 # This option modifies the set of compiler flags for
10219 # building this package. These flags are removed from
10220 # the set of global flags if present.
10222 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10224 # No user value, uncomment the following line to provide one.
10225 # user_value -Wno-pointer-sign
10226 # value_source default
10227 # Default value: -Wno-pointer-sign
10231 # This option specifies the set of tests for this package.
10233 cdl_option CYGPKG_MEMALLOC_TESTS {
10234 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10236 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10241 # Common error code support
10242 # This package contains the common list of error and
10243 # status codes. It is held centrally to allow
10244 # packages to interchange error codes and status
10245 # codes in a common way, rather than each package
10246 # having its own conventions for error/status
10247 # reporting. The error codes are modelled on the
10248 # POSIX style naming e.g. EINVAL etc. This package
10249 # also provides the standard strerror() function to
10250 # convert error codes to textual representation, as
10251 # well as an implementation of the errno idiom.
10253 cdl_package CYGPKG_ERROR {
10254 # Packages cannot be added or removed, nor can their version be changed,
10255 # simply by editing their value. Instead the appropriate configuration
10256 # should be used to perform these actions.
10258 # This value cannot be modified here.
10260 # Current value: 1 current
10261 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10262 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10268 # This package controls the behaviour of the
10269 # errno variable (or more strictly, expression)
10272 cdl_component CYGPKG_ERROR_ERRNO {
10274 # No user value, uncomment the following line to provide one.
10276 # value_source default
10278 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10279 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10285 # This option controls whether the standard error
10286 # code reporting variable errno is a per-thread
10287 # variable, rather than global.
10289 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10291 # No user value, uncomment the following line to provide one.
10293 # The inferred value should not be edited directly.
10295 # value_source inferred
10297 # Requires: CYGVAR_KERNEL_THREADS_DATA
10298 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10303 # Trace verbosity level for debugging the errno
10304 # retrieval mechanism in errno.cxx. Increase this
10305 # value to get additional trace output.
10307 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10309 # No user value, uncomment the following line to provide one.
10311 # value_source default
10313 # Legal values: 0 to 1
10317 # strerror function
10318 # This package controls the presence and behaviour of the
10319 # strerror() function from <string.h>
10321 cdl_option CYGPKG_ERROR_STRERROR {
10323 # No user value, uncomment the following line to provide one.
10325 # value_source default
10327 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10328 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10332 # Error package build options
10333 # Package specific build options including control over
10334 # compiler flags used only in building this package,
10335 # and details of which tests are built.
10337 cdl_component CYGPKG_ERROR_OPTIONS {
10338 # There is no associated value.
10342 # Additional compiler flags
10343 # This option modifies the set of compiler flags for
10344 # building the error package. These flags are used in addition
10345 # to the set of global flags.
10347 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10349 # No user value, uncomment the following line to provide one.
10351 # value_source default
10352 # Default value: ""
10355 # Suppressed compiler flags
10356 # This option modifies the set of compiler flags for
10357 # building the error package. These flags are removed from
10358 # the set of global flags if present.
10360 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10362 # No user value, uncomment the following line to provide one.
10364 # value_source default
10365 # Default value: ""
10370 # I2C driver for FSL MXC-based platforms
10372 cdl_package CYGPKG_DEVS_MXC_I2C {
10373 # Packages cannot be added or removed, nor can their version be changed,
10374 # simply by editing their value. Instead the appropriate configuration
10375 # should be used to perform these actions.
10377 # This value cannot be modified here.
10379 # Current value: 1 current
10382 # ipu driver for mxc
10384 cdl_package CYGPKG_DEVS_IMX_IPU {
10385 # Packages cannot be added or removed, nor can their version be changed,
10386 # simply by editing their value. Instead the appropriate configuration
10387 # should be used to perform these actions.
10389 # This value cannot be modified here.
10391 # Current value: 1 current
10393 # The following properties are affected by this value
10394 # option CYGHWR_MX53_LCD_LOGO
10395 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10399 # IPU version 3EX support
10400 # When this option is enabled, it indicates the IPU version
10403 cdl_option CYGHWR_DEVS_IPU_3_EX {
10405 # No user value, uncomment the following line to provide one.
10407 # The inferred value should not be edited directly.
10409 # value_source inferred
10413 # IPU version 3D support
10414 # When this option is enabled, it indicates the IPU version
10417 cdl_option CYGHWR_DEVS_IPU_3_D {
10419 # No user value, uncomment the following line to provide one.
10421 # value_source default