1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX53 current ;
34 package -hardware CYGPKG_HAL_ARM_TX53KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX53 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX53
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX53 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX53 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX53 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
803 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
804 # CYGPKG_HAL_ARM_MX53 == current
808 # No user value, uncomment the following line to provide one.
810 # value_source default
815 # Ethernet transceiver (PHY) support
816 # API for ethernet PHY devices
818 cdl_package CYGPKG_DEVS_ETH_PHY {
819 # Packages cannot be added or removed, nor can their version be changed,
820 # simply by editing their value. Instead the appropriate configuration
821 # should be used to perform these actions.
823 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
824 # CYGPKG_IO_ETH_DRIVERS == current
827 # This value cannot be modified here.
829 # Current value: 1 current
830 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
831 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
836 # Enable driver debugging
837 # Enables the diagnostic debug messages on the
840 cdl_option CYGDBG_DEVS_ETH_PHY {
842 # No user value, uncomment the following line to provide one.
844 # value_source default
848 # Time period (seconds) to wait for auto-negotiation
849 # The length of time to wait for auto-negotiation to complete
850 # before giving up and declaring the link dead/missing.
852 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
854 # No user value, uncomment the following line to provide one.
856 # value_source default
861 # Include support for National Semiconductor DP83847 DsPHYTER II
863 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
865 # No user value, uncomment the following line to provide one.
867 # value_source default
872 # Include support for AMD 79C874 NetPHY
874 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
876 # No user value, uncomment the following line to provide one.
878 # value_source default
883 # Include support for Intel LXT972xxx PHY
885 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
887 # No user value, uncomment the following line to provide one.
889 # value_source default
894 # Include support for ICS 1890 PHY
896 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
898 # No user value, uncomment the following line to provide one.
900 # value_source default
905 # Include support for ICS 1892 PHY
907 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
909 # No user value, uncomment the following line to provide one.
911 # value_source default
916 # Include support for ICS 1893 and 1893AF PHY
918 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
920 # No user value, uncomment the following line to provide one.
922 # value_source default
927 # Include support for the Davicom DM9161A PHY
929 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
931 # No user value, uncomment the following line to provide one.
933 # value_source default
938 # Include support for the Micrel KS8721 PHY
940 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
942 # No user value, uncomment the following line to provide one.
944 # value_source default
949 # Include support for SMSC LAN8700 NetPHY
951 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
953 # No user value, uncomment the following line to provide one.
955 # The inferred value should not be edited directly.
957 # value_source inferred
960 # The following properties are affected by this value
961 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
962 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
967 # ISO C library internationalization functions
969 # This package provides internationalization functions specified by the
970 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
971 # functionality and <ctype.h> functionality.
973 cdl_package CYGPKG_LIBC_I18N {
974 # Packages cannot be added or removed, nor can their version be changed,
975 # simply by editing their value. Instead the appropriate configuration
976 # should be used to perform these actions.
978 # This value cannot be modified here.
980 # Current value: 1 current
981 # Requires: CYGPKG_ISOINFRA
982 # CYGPKG_ISOINFRA == current
988 # These options determine which locales other than the "C" locale
989 # are supported and hence contribute to the size of the executable.
991 cdl_component CYGPKG_LIBC_I18N_LOCALES {
992 # There is no associated value.
996 # Support for multiple locales required
998 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
999 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1002 # This value cannot be modified here.
1004 # Current value: 0 0
1005 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1006 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1009 # The following properties are affected by this value
1012 # C-SJIS locale support
1013 # This option controls if the "C-SJIS" locale will be
1014 # supported by setlocale(). The locale is a hybrid locale
1015 # that is mostly the "C" locale with Japanese SJIS multibyte
1018 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1020 # No user value, uncomment the following line to provide one.
1022 # value_source default
1025 # The following properties are affected by this value
1026 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1027 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1028 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1029 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1032 # C-JIS locale support
1033 # This option controls if the "C-JIS" locale will be
1034 # supported by setlocale(). The locale is a hybrid locale
1035 # that is mostly the "C" locale with Japanese JIS multibyte
1038 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1040 # No user value, uncomment the following line to provide one.
1042 # value_source default
1045 # The following properties are affected by this value
1046 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1047 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1048 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1049 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1052 # C-EUCJP locale support
1053 # This option controls if the "C-EUCJP" locale will be
1054 # supported by setlocale(). The locale is a hybrid locale
1055 # that is mostly the "C" locale with Japanese EUCJP multibyte
1058 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1060 # No user value, uncomment the following line to provide one.
1062 # value_source default
1065 # The following properties are affected by this value
1066 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1067 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1068 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1069 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1073 # Newlib's ctype implementation
1074 # This option enables the implementation of the ctype functions
1075 # that comes with newlib. It is table driven and therefore
1076 # exhibits different performance characteristics. It also offers
1077 # a limited amount of binary compatibility
1078 # with newlib so that programs linked against newlib ctype/locale
1079 # do not need to be recompiled when linked with eCos.
1081 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1083 # No user value, uncomment the following line to provide one.
1085 # value_source default
1087 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1088 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1092 # Per-thread multibyte state
1093 # This option controls whether the multibyte character
1094 # handling functions mblen(), mbtowc(), and wctomb(),
1095 # have their state recorded on a per-thread
1096 # basis rather than global. If this option is
1097 # disabled, some per-thread space can be saved.
1098 # Enabling this option will use three slots
1099 # of kernel per-thread data. You should ensure you
1100 # have enough slots configured for all your
1103 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1104 # This option is not active
1105 # ActiveIf constraint: CYGPKG_KERNEL
1106 # CYGPKG_KERNEL (unknown) == 0
1110 # No user value, uncomment the following line to provide one.
1112 # value_source default
1113 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1114 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1116 # Requires: CYGVAR_KERNEL_THREADS_DATA
1117 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1121 # Size of locale name strings
1122 # This option controls the maximum size of
1123 # locale names and is used, among other things
1124 # to instantiate a static string used
1125 # as a return value from the
1126 # setlocale() function. When requesting the
1127 # current locale settings with LC_ALL, a string
1128 # must be constructed to contain this data, rather
1129 # than just returning a constant string. This
1130 # string data is stored in the static string.
1131 # This depends on the length of locale names,
1132 # hence this option. If just the C locale is
1133 # present, this option can be set as low as 2.
1135 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1137 # No user value, uncomment the following line to provide one.
1139 # value_source default
1140 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1141 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1142 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1145 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1146 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1147 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1151 # Inline versions of <ctype.h> functions
1152 # This option chooses whether the simple character
1153 # classification and conversion functions (e.g.
1154 # isupper(), isalpha(), toupper(), etc.)
1155 # from <ctype.h> are available as inline
1156 # functions. This may improve performance and as
1157 # the functions are small, may even improve code
1160 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1162 # No user value, uncomment the following line to provide one.
1164 # value_source default
1166 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1167 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1171 # C library i18n functions build options
1172 # Package specific build options including control over
1173 # compiler flags used only in building this package,
1174 # and details of which tests are built.
1176 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1177 # There is no associated value.
1181 # Additional compiler flags
1182 # This option modifies the set of compiler flags for
1183 # building the C library. These flags are used in addition
1184 # to the set of global flags.
1186 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1188 # No user value, uncomment the following line to provide one.
1189 # user_value "-fno-rtti -Woverloaded-virtual"
1190 # value_source default
1191 # Default value: "-fno-rtti -Woverloaded-virtual"
1194 # Suppressed compiler flags
1195 # This option modifies the set of compiler flags for
1196 # building the C library. These flags are removed from
1197 # the set of global flags if present.
1199 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1201 # No user value, uncomment the following line to provide one.
1202 # user_value -Wno-pointer-sign
1203 # value_source default
1204 # Default value: -Wno-pointer-sign
1207 # C library i18n function tests
1208 # This option specifies the set of tests for the C library
1211 cdl_option CYGPKG_LIBC_I18N_TESTS {
1212 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1214 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1219 # ISO C library general utility functions
1220 # doc: ref/libc.html
1221 # This package provides general utility functions in <stdlib.h>
1222 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1224 cdl_package CYGPKG_LIBC_STDLIB {
1225 # Packages cannot be added or removed, nor can their version be changed,
1226 # simply by editing their value. Instead the appropriate configuration
1227 # should be used to perform these actions.
1229 # This value cannot be modified here.
1231 # Current value: 1 current
1232 # Requires: CYGPKG_ISOINFRA
1233 # CYGPKG_ISOINFRA == current
1235 # Requires: CYGINT_ISO_CTYPE
1236 # CYGINT_ISO_CTYPE == 1
1238 # Requires: CYGINT_ISO_STRING_STRFUNCS
1239 # CYGINT_ISO_STRING_STRFUNCS == 1
1244 # Inline versions of <stdlib.h> functions
1245 # This option chooses whether some of the
1246 # particularly simple standard utility functions
1247 # from <stdlib.h> are available as inline
1248 # functions. This may improve performance, and as
1249 # the functions are small, may even improve code
1252 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1253 # There is no associated value.
1259 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1261 # No user value, uncomment the following line to provide one.
1263 # value_source default
1265 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1266 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1272 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1274 # No user value, uncomment the following line to provide one.
1276 # value_source default
1278 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1279 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1283 # atof() / atoi() / atol()
1285 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1287 # No user value, uncomment the following line to provide one.
1289 # value_source default
1291 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1292 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1297 # Random number generation
1298 # These options control the behaviour of the
1299 # functions rand(), srand() and rand_r()
1301 cdl_component CYGPKG_LIBC_RAND {
1302 # There is no associated value.
1306 # Per-thread random seed
1307 # doc: ref/libc-thread-safety.html
1308 # This option controls whether the pseudo-random
1309 # number generation functions rand() and srand()
1310 # have their state recorded on a per-thread
1311 # basis rather than global. If this option is
1312 # disabled, some per-thread space can be saved.
1313 # Note there is also a POSIX-standard rand_r()
1314 # function to achieve a similar effect with user
1315 # support. Enabling this option will use one slot
1316 # of kernel per-thread data. You should ensure you
1317 # have enough slots configured for all your
1320 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1322 # No user value, uncomment the following line to provide one.
1324 # value_source default
1326 # Requires: CYGVAR_KERNEL_THREADS_DATA
1327 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1331 # Random number seed
1332 # This selects the initial random number seed for
1333 # rand()'s pseudo-random number generator. For
1334 # strict ISO standard compliance, this should be 1,
1335 # as per section 7.10.2.2 of the standard.
1337 cdl_option CYGNUM_LIBC_RAND_SEED {
1339 # No user value, uncomment the following line to provide one.
1341 # value_source default
1343 # Legal values: 0 to 0x7fffffff
1347 # Trace verbosity level for debugging the rand(),
1348 # srand() and rand_r() functions. Increase this
1349 # value to get additional trace output.
1351 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1353 # No user value, uncomment the following line to provide one.
1355 # value_source default
1357 # Legal values: 0 to 1
1360 # Simplest implementation
1361 # This provides a very simple implementation of rand()
1362 # that does not perform well with randomness in the
1363 # lower significant bits. However it is exceptionally
1364 # fast. It uses the sample algorithm from the ISO C
1367 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1369 # No user value, uncomment the following line to provide one.
1371 # value_source default
1375 # Simple implementation #1
1376 # This provides a very simple implementation of rand()
1377 # based on the simplest implementation above. However
1378 # it does try to work around the lack of randomness
1379 # in the lower significant bits, at the expense of a
1382 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1389 # Knuth implementation #1
1390 # This implements a slightly more complex algorithm
1391 # published in Donald E. Knuth's Art of Computer
1392 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1393 # This produces better random numbers than the
1394 # simplest approach but is slower.
1396 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1405 # This option allows use of the utility function
1406 # strtod() (and consequently atof()) to convert
1407 # from string to double precision floating point
1408 # numbers. Disabling this option removes the
1409 # dependency on the math library package.
1411 cdl_option CYGFUN_LIBC_strtod {
1413 # No user value, uncomment the following line to provide one.
1415 # value_source default
1416 # Default value: 0 != CYGPKG_LIBM
1417 # CYGPKG_LIBM (unknown) == 0
1419 # Requires: CYGPKG_LIBM
1420 # CYGPKG_LIBM (unknown) == 0
1424 # Provides long long conversion functions
1425 # Enabling this option will provide support for the strtoll(),
1426 # strtoull() and atoll() conversion functions, which are
1427 # the long long variants of the standard versions of these
1428 # functions. Supporting this requires extra code and compile
1431 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1438 # bsearch() tracing level
1439 # Trace verbosity level for debugging the <stdlib.h>
1440 # binary search function bsearch(). Increase this
1441 # value to get additional trace output.
1443 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1445 # No user value, uncomment the following line to provide one.
1447 # value_source default
1449 # Legal values: 0 to 1
1452 # qsort() tracing level
1453 # Trace verbosity level for debugging the <stdlib.h>
1454 # quicksort function qsort(). Increase this value
1455 # to get additional trace output.
1457 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1459 # No user value, uncomment the following line to provide one.
1461 # value_source default
1463 # Legal values: 0 to 1
1466 # C library stdlib build options
1467 # Package specific build options including control over
1468 # compiler flags used only in building this package,
1469 # and details of which tests are built.
1471 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1472 # There is no associated value.
1476 # Additional compiler flags
1477 # This option modifies the set of compiler flags for
1478 # building this package. These flags are used in addition
1479 # to the set of global flags.
1481 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1483 # No user value, uncomment the following line to provide one.
1484 # user_value "-fno-rtti -Woverloaded-virtual"
1485 # value_source default
1486 # Default value: "-fno-rtti -Woverloaded-virtual"
1489 # Suppressed compiler flags
1490 # This option modifies the set of compiler flags for
1491 # building this package. These flags are removed from
1492 # the set of global flags if present.
1494 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1496 # No user value, uncomment the following line to provide one.
1497 # user_value -Wno-pointer-sign
1498 # value_source default
1499 # Default value: -Wno-pointer-sign
1502 # C library stdlib tests
1503 # This option specifies the set of tests for this package.
1505 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1506 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1508 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1515 # doc: ref/the-ecos-hardware-abstraction-layer.html
1516 # The eCos HAL package provide a porting layer for
1517 # higher-level parts of the system such as the kernel and the
1518 # C library. Each installation should have HAL packages for
1519 # one or more architectures, and for each architecture there
1520 # may be one or more supported platforms. It is necessary to
1521 # select one target architecture and one platform for that
1522 # architecture. There are also a number of configuration
1523 # options that are common to all HAL packages.
1525 cdl_package CYGPKG_HAL {
1526 # Packages cannot be added or removed, nor can their version be changed,
1527 # simply by editing their value. Instead the appropriate configuration
1528 # should be used to perform these actions.
1530 # This value cannot be modified here.
1532 # Current value: 1 current
1533 # Requires: CYGPKG_INFRA
1534 # CYGPKG_INFRA == current
1537 # The following properties are affected by this value
1541 # Platform-independent HAL options
1542 # A number of configuration options are common to most or all
1543 # HAL packages, for example options controlling how much state
1544 # should be saved during a context switch. The implementations
1545 # of these options will vary from architecture to architecture.
1547 cdl_component CYGPKG_HAL_COMMON {
1548 # There is no associated value.
1552 # Provide eCos kernel support
1553 # The HAL can be configured to either support the full eCos
1554 # kernel, or to support only very simple applications which do
1555 # not require a full kernel. If kernel support is not required
1556 # then some of the startup, exception, and interrupt handling
1557 # code can be eliminated.
1559 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1561 # No user value, uncomment the following line to provide one.
1563 # value_source default
1564 # Default value: CYGPKG_KERNEL
1565 # CYGPKG_KERNEL (unknown) == 0
1567 # Requires: CYGPKG_KERNEL
1568 # CYGPKG_KERNEL (unknown) == 0
1572 # HAL exception support
1573 # When a processor exception occurs, for example an attempt to
1574 # execute an illegal instruction or to perform a divide by
1575 # zero, this exception may be handled in a number of different
1576 # ways. If the target system has gdb support then typically
1577 # the exception will be handled by gdb code. Otherwise if the
1578 # HAL exception support is enabled then the HAL will invoke a
1579 # routine deliver_exception(). Typically this routine will be
1580 # provided by the eCos kernel, but it is possible for
1581 # application code to provide its own implementation. If the
1582 # HAL exception support is not enabled and a processor
1583 # exception occurs then the behaviour of the system is
1586 cdl_option CYGPKG_HAL_EXCEPTIONS {
1588 # No user value, uncomment the following line to provide one.
1590 # value_source default
1591 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1592 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1594 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1595 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1599 # Stop calling constructors early
1600 # This option supports environments where some constructors
1601 # must be run in the context of a thread rather than at
1602 # simple system startup time. A boolean flag named
1603 # cyg_hal_stop_constructors is set to 1 when constructors
1604 # should no longer be invoked. It is up to some other
1605 # package to deal with the rest of the constructors.
1606 # In the current version this is only possible with the
1609 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1611 # No user value, uncomment the following line to provide one.
1613 # value_source default
1615 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1616 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1620 # HAL uses the MMU and allows for CDL manipulation of it's use
1622 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1623 # No options implement this inferface
1624 # This value cannot be modified here.
1628 # The following properties are affected by this value
1629 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1630 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1633 # Install MMU tables.
1634 # This option controls whether this application installs
1635 # its own Memory Management Unit (MMU) tables, or relies on the
1636 # existing environment to run.
1638 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1639 # This option is not active
1640 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1641 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1645 # No user value, uncomment the following line to provide one.
1647 # value_source default
1648 # Default value: CYG_HAL_STARTUP != "RAM"
1649 # CYG_HAL_STARTUP == ROMRAM
1652 # The following properties are affected by this value
1653 # option CYGSEM_HAL_STATIC_MMU_TABLES
1654 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1657 # Use static MMU tables.
1658 # This option defines an environment where any Memory
1659 # Management Unit (MMU) tables are constant. Normally used by ROM
1660 # based environments, this provides a way to save RAM usage which
1661 # would otherwise be required for these tables.
1663 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1665 # No user value, uncomment the following line to provide one.
1667 # value_source default
1669 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1670 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1674 # Route diagnostic output to debug channel
1675 # If not inheriting the console setup from the ROM monitor,
1676 # it is possible to redirect diagnostic output to the debug
1677 # channel by enabling this option. Depending on the debugger
1678 # used it may also be necessary to select a mangler for the
1679 # output to be displayed by the debugger.
1681 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1682 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1683 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1685 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1686 # CYGPKG_HAL_ARM == current
1687 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1688 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1689 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1693 # No user value, uncomment the following line to provide one.
1695 # value_source default
1696 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1697 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1698 # CYG_HAL_STARTUP == ROMRAM
1701 # The following properties are affected by this value
1702 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1703 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1707 # Mangler used on diag output
1708 # It is sometimes necessary to mangle (encode) the
1709 # diag ASCII text output in order for it to show up at the
1710 # other end. In particular, GDB may silently ignore raw
1713 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1714 # This option is not active
1715 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1718 # No user value, uncomment the following line to provide one.
1720 # value_source default
1721 # Default value: GDB
1722 # Legal values: "GDB" "None"
1727 # HAL interrupt handling
1728 # A number of configuration options related to interrupt
1729 # handling are common to most or all HAL packages, even though
1730 # the implementations will vary from architecture to
1733 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1734 # There is no associated value.
1738 # Use separate stack for interrupts
1739 # When an interrupt occurs this interrupt can be handled either
1740 # on the current stack or on a separate stack maintained by the
1741 # HAL. Using a separate stack requires a small number of extra
1742 # instructions in the interrupt handling code, but it has the
1743 # advantage that it is no longer necessary to allow extra space
1744 # in every thread stack for the interrupt handlers. The amount
1745 # of extra space required depends on the interrupt handlers
1746 # that are being used.
1748 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1750 # No user value, uncomment the following line to provide one.
1752 # The inferred value should not be edited directly.
1754 # value_source inferred
1757 # The following properties are affected by this value
1758 # package CYGPKG_REDBOOT
1759 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1762 # Interrupt stack size
1763 # This configuration option specifies the stack size in bytes
1764 # for the interrupt stack. Typically this should be a multiple
1765 # of 16, but the exact requirements will vary from architecture
1766 # to architecture. The interrupt stack serves two separate
1767 # purposes. It is used as the stack during system
1768 # initialization. In addition, if the interrupt system is
1769 # configured to use a separate stack then all interrupts will
1770 # be processed on this stack. The exact memory requirements
1771 # will vary from application to application, and will depend
1772 # heavily on whether or not other interrupt-related options,
1773 # for example nested interrupts, are enabled. On most targets,
1774 # in a configuration with no kernel this stack will also be
1775 # the stack used to invoke the application, and must obviously
1776 # be appropriately large in that case.
1778 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1780 # No user value, uncomment the following line to provide one.
1782 # value_source default
1783 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1784 # CYGPKG_KERNEL (unknown) == 0
1786 # Legal values: 128 to 1048576
1789 # Allow nested interrupts
1790 # When an interrupt occurs the HAL interrupt handling code can
1791 # either leave interrupts disabled for the duration of the
1792 # interrupt handling code, or by doing some extra work it can
1793 # reenable interrupts before invoking the interrupt handler and
1794 # thus allow nested interrupts to happen. If all the interrupt
1795 # handlers being used are small and do not involve any loops
1796 # then it is usually better to disallow nested interrupts.
1797 # However if any of the interrupt handlers are more complicated
1798 # than nested interrupts will usually be required.
1800 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1802 # No user value, uncomment the following line to provide one.
1804 # value_source default
1808 # Save minimum context on interrupt
1809 # The HAL interrupt handling code can exploit the calling conventions
1810 # defined for a given architecture to reduce the amount of state
1811 # that has to be saved. Generally this improves performance and
1812 # reduces code size. However it can make source-level debugging
1815 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1817 # No user value, uncomment the following line to provide one.
1819 # The inferred value should not be edited directly.
1821 # value_source inferred
1824 # The following properties are affected by this value
1825 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1826 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1827 # component CYGBLD_BUILD_REDBOOT
1828 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1831 # Chain all interrupts together
1832 # Interrupts can be attached to vectors either singly, or be
1833 # chained together. The latter is necessary if there is no way
1834 # of discovering which device has interrupted without
1835 # inspecting the device itself. It can also reduce the amount
1836 # of RAM needed for interrupt decoding tables and code.
1838 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1840 # No user value, uncomment the following line to provide one.
1842 # value_source default
1846 # Ignore spurious [fleeting] interrupts
1847 # On some hardware, interrupt sources may not be de-bounced or
1848 # de-glitched. Rather than try to handle these interrupts (no
1849 # handling may be possible), this option allows the HAL to simply
1850 # ignore them. In most cases, if the interrupt is real it will
1851 # reoccur in a detectable form.
1853 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1855 # No user value, uncomment the following line to provide one.
1857 # value_source default
1862 # HAL context switch support
1863 # A number of configuration options related to thread contexts
1864 # are common to most or all HAL packages, even though the
1865 # implementations will vary from architecture to architecture.
1867 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1868 # There is no associated value.
1870 # The following properties are affected by this value
1874 # Use minimum thread context
1875 # The thread context switch code can exploit the calling
1876 # conventions defined for a given architecture to reduce the
1877 # amount of state that has to be saved during a context
1878 # switch. Generally this improves performance and reduces
1879 # code size. However it can make source-level debugging more
1882 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1884 # No user value, uncomment the following line to provide one.
1886 # The inferred value should not be edited directly.
1888 # value_source inferred
1891 # The following properties are affected by this value
1892 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1893 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1894 # component CYGBLD_BUILD_REDBOOT
1895 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1899 # Explicit control over cache behaviour
1900 # These options let the default behaviour of the caches
1901 # be easily configurable.
1903 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1904 # There is no associated value.
1908 # Enable DATA cache on startup
1909 # Enabling this option will cause the data cache to be enabled
1910 # as soon as practicable when eCos starts up. One would choose
1911 # to disable this if the data cache cannot safely be turned on,
1912 # such as a case where the cache(s) require additional platform
1915 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1917 # No user value, uncomment the following line to provide one.
1919 # value_source default
1924 # DATA cache mode on startup
1925 # This option controls the mode the cache will be set to
1926 # when enabled on startup.
1928 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1930 # No user value, uncomment the following line to provide one.
1931 # user_value COPYBACK
1932 # value_source default
1933 # Default value: COPYBACK
1934 # Legal values: "COPYBACK" "WRITETHRU"
1938 # Enable INSTRUCTION cache on startup
1939 # Enabling this option will cause the instruction cache to be enabled
1940 # as soon as practicable when eCos starts up. One would choose
1941 # to disable this if the instruction cache cannot safely be turned on,
1942 # such as a case where the cache(s) require additional platform
1945 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1947 # No user value, uncomment the following line to provide one.
1949 # value_source default
1954 # Source-level debugging support
1955 # If the source level debugger gdb is to be used for debugging
1956 # application code then it may be necessary to configure in support
1957 # for this in the HAL.
1959 cdl_component CYGPKG_HAL_DEBUG {
1960 # There is no associated value.
1964 # Support for GDB stubs
1965 # The HAL implements GDB stubs for the target.
1967 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1968 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
1969 # This value cannot be modified here.
1973 # The following properties are affected by this value
1974 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1975 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1976 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1977 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1980 # Include GDB stubs in HAL
1981 # This option causes a set of GDB stubs to be included into the
1982 # system. On some target systems the GDB support will be
1983 # provided by other means, for example by a ROM monitor. On
1984 # other targets, especially when building a ROM-booting system,
1985 # the necessary support has to go into the target library
1986 # itself. When GDB stubs are include in a configuration, HAL
1987 # serial drivers must also be included.
1989 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1990 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1991 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1995 # No user value, uncomment the following line to provide one.
1997 # The inferred value should not be edited directly.
1999 # value_source inferred
2001 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2002 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2004 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2005 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2007 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2008 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2010 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2011 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2015 # The following properties are affected by this value
2016 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2017 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2018 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2020 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2021 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2022 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2023 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2024 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2025 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2026 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2027 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2028 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2029 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2030 # option CYGPKG_HAL_GDB_FILEIO
2031 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2032 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2033 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2034 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2035 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2036 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2037 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2040 # Support for external break support in GDB stubs
2041 # The HAL implements external break (or asynchronous interrupt)
2042 # in the GDB stubs for the target.
2044 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2045 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2046 # This value cannot be modified here.
2050 # The following properties are affected by this value
2051 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2052 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2055 # Include GDB external break support for stubs
2056 # This option causes the GDB stub to add a serial interrupt handler
2057 # which will listen for GDB break packets. This lets you stop the
2058 # target asynchronously when using GDB, usually by hitting Control+C
2059 # or pressing the STOP button. This option differs from
2060 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2061 # GDB stubs are present.
2063 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2064 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2065 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2069 # No user value, uncomment the following line to provide one.
2071 # value_source default
2072 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2073 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2075 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2076 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2079 # The following properties are affected by this value
2080 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2081 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2082 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2083 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2084 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2085 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2088 # Platform does not support CTRLC
2090 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2091 # No options implement this inferface
2092 # This value cannot be modified here.
2096 # The following properties are affected by this value
2097 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2098 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2101 # Include GDB external break support when no stubs
2102 # This option adds an interrupt handler for the GDB serial line
2103 # which will listen for GDB break packets. This lets you stop the
2104 # target asynchronously when using GDB, usually by hitting Control+C
2105 # or pressing the STOP button. This option differs from
2106 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2107 # stubs are NOT present.
2109 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2110 # This option is not active
2111 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2112 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2113 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2115 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2116 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2120 # No user value, uncomment the following line to provide one.
2122 # value_source default
2123 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2124 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2126 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2127 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2130 # The following properties are affected by this value
2131 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2132 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2133 # component CYGBLD_BUILD_REDBOOT
2134 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2137 # Include GDB multi-threading debug support
2138 # This option enables some extra HAL code which is needed
2139 # to support multi-threaded source level debugging.
2141 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2142 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2143 # CYGSEM_HAL_ROM_MONITOR == 1
2144 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2148 # No user value, uncomment the following line to provide one.
2150 # value_source default
2153 # The following properties are affected by this value
2154 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2155 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2156 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2157 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2160 # Number of times to retry sending a $O packet
2161 # This option controls the number of attempts that eCos programs
2162 # will make to send a $O packet to a host GDB process. If it is
2163 # set non-zero, then the target process will attempt to resend the
2164 # $O packet data up to this number of retries. Caution: use of
2165 # this option is not recommended as it can thoroughly confuse the
2168 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2170 # No user value, uncomment the following line to provide one.
2172 # value_source default
2176 # Timeout period for GDB packets
2177 # This option controls the time (in milliseconds) that eCos programs
2178 # will wait for a response when sending packets to a host GDB process.
2179 # If this time elapses, then the packet will be resent, up to some
2180 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2182 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2184 # No user value, uncomment the following line to provide one.
2186 # value_source default
2187 # Default value: 500
2190 # Location of CRC32 table
2191 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2192 # and placed in ROM, or generated at runtime in RAM. Depending on
2193 # your memory constraints, one of these options may be better.
2195 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2197 # No user value, uncomment the following line to provide one.
2199 # value_source default
2200 # Default value: RAM
2201 # Legal values: "ROM" "RAM"
2205 # ROM monitor support
2206 # Support for ROM monitors can be built in to your application.
2207 # It may also be relevant to build your application as a ROM monitor
2208 # itself. Such options are contained here if relevant for your chosen
2209 # platform. The options and ROM monitors available to choose are
2210 # platform-dependent.
2212 cdl_component CYGPKG_HAL_ROM_MONITOR {
2213 # There is no associated value.
2215 # The following properties are affected by this value
2219 # Target has virtual vector support
2221 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2222 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2223 # This value cannot be modified here.
2227 # The following properties are affected by this value
2228 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2229 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2232 # Target supports baud rate control via vectors
2233 # Whether this target supports the __COMMCTL_GETBAUD
2234 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2236 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2237 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2238 # This value cannot be modified here.
2242 # The following properties are affected by this value
2243 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2244 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2247 # Enable use of virtual vector calling interface
2248 # Virtual vector support allows the HAL to let the ROM
2249 # monitor handle certain operations. The virtual vector table
2250 # defines a calling interface between applications running in
2251 # RAM and the ROM monitor.
2253 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2254 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2255 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2258 # Calculated value: 1
2262 # The following properties are affected by this value
2263 # component CYGBLD_BUILD_REDBOOT
2264 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2265 # package CYGPKG_DEVS_ETH_PHY
2266 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2270 # Inherit console settings from ROM monitor
2271 # When this option is set, the application will inherit
2272 # the console as set up by the ROM monitor. This means
2273 # that the application will use whatever channel and
2274 # mangling style was used by the ROM monitor when
2275 # the application was launched.
2277 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2278 # This option is not active
2279 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2280 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2284 # No user value, uncomment the following line to provide one.
2286 # value_source default
2287 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2288 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2291 # The following properties are affected by this value
2292 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2293 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2294 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2295 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2298 # Debug channel is configurable
2299 # This option is a configuration hint - it is enabled
2300 # when the HAL initialization code will make use
2301 # of the debug channel configuration option.
2303 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2304 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2305 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2309 # The following properties are affected by this value
2310 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2311 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2314 # Console channel is configurable
2315 # This option is a configuration hint - it is enabled
2316 # when the HAL initialization code will make use
2317 # of the console channel configuration option.
2319 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2320 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2321 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2322 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2326 # The following properties are affected by this value
2327 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2328 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2331 # Initialize whole of virtual vector table
2332 # This option will cause the whole of the virtual
2333 # vector table to be initialized with dummy values on
2334 # startup. When this option is enabled, all the
2335 # options below must also be enabled - or the
2336 # table would be empty when the application
2338 # On targets where older ROM monitors without
2339 # virtual vector support may still be in use, it is
2340 # necessary for RAM applictions to initialize the
2341 # table (since all HAL diagnostics and debug IO
2342 # happens via the table).
2344 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2346 # No user value, uncomment the following line to provide one.
2348 # value_source default
2349 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2350 # CYG_HAL_STARTUP == ROMRAM
2351 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2353 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2354 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2356 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2357 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2359 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2360 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2362 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2363 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2365 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2366 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2369 # The following properties are affected by this value
2370 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2371 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2372 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2373 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2374 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2375 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2376 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2377 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2378 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2379 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2380 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2381 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2382 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2383 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2386 # Claim virtual vector table entries by default
2387 # By default most virtual vectors will be claimed by
2388 # RAM startup configurations, meaning that the RAM
2389 # application will provide the services. The
2390 # exception is COMMS support (HAL
2391 # diagnostics/debugging IO) which is left in the
2392 # control of the ROM monitor.
2393 # The reasoning behind this is to get as much of the
2394 # code exercised during regular development so it
2395 # is known to be working the few times a new ROM
2396 # monitor or a ROM production configuration is used
2397 # - COMMS are excluded only by necessity in order to
2398 # avoid breaking an existing debugger connections
2399 # (there may be ways around this).
2400 # For production RAM configurations this option can
2401 # be switched off, causing the appliction to rely on
2402 # the ROM monitor for these services, thus
2403 # saving some space.
2404 # Individual vectors may also be left unclaimed,
2405 # controlled by the below options (meaning that the
2406 # associated service provided by the ROM monitor
2409 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2410 # This option is not active
2411 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2412 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2416 # No user value, uncomment the following line to provide one.
2418 # value_source default
2421 # The following properties are affected by this value
2422 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2423 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2424 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2425 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2426 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2427 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2428 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2429 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2432 # Claim reset virtual vectors
2433 # This option will cause the reset and kill_by_reset
2434 # virtual vectors to be claimed.
2436 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2438 # No user value, uncomment the following line to provide one.
2440 # value_source default
2441 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2442 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2446 # The following properties are affected by this value
2447 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2448 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2451 # Claim version virtual vectors
2452 # This option will cause the version
2453 # virtual vectors to be claimed.
2455 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2457 # No user value, uncomment the following line to provide one.
2459 # value_source default
2460 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2461 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2465 # Claim delay_us virtual vector
2466 # This option will cause the delay_us
2467 # virtual vector to be claimed.
2469 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2471 # No user value, uncomment the following line to provide one.
2473 # value_source default
2474 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2475 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2479 # The following properties are affected by this value
2480 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2481 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2484 # Claim cache virtual vectors
2485 # This option will cause the cache virtual vectors
2488 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2490 # No user value, uncomment the following line to provide one.
2492 # value_source default
2493 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2494 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2498 # The following properties are affected by this value
2499 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2500 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2503 # Claim data virtual vectors
2504 # This option will cause the data virtual vectors
2505 # to be claimed. At present there is only one, used
2506 # by the RedBoot ethernet driver to share diag output.
2508 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2510 # No user value, uncomment the following line to provide one.
2512 # value_source default
2513 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2514 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2518 # The following properties are affected by this value
2519 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2520 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2523 # Claim comms virtual vectors
2524 # This option will cause the communication tables
2525 # that are part of the virtual vectors mechanism to
2526 # be claimed. Note that doing this may cause an
2527 # existing ROM monitor communication connection to
2528 # be closed. For this reason, the option is disabled
2529 # per default for normal application
2532 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2534 # No user value, uncomment the following line to provide one.
2536 # value_source default
2537 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2538 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2539 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2542 # The following properties are affected by this value
2543 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2544 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2545 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2546 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2547 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2548 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2549 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2550 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2553 # Do diagnostic IO via virtual vector table
2554 # All HAL IO happens via the virtual vector table / comm
2555 # tables when those tables are supported by the HAL.
2556 # If so desired, the low-level IO functions can
2557 # still be provided by the RAM application by
2558 # enabling the CLAIM_COMMS option.
2560 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2561 # Calculated value: 1
2565 # The following properties are affected by this value
2566 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2567 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2568 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2569 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2573 # Behave as a ROM monitor
2574 # Enable this option if this program is to be used as a ROM monitor,
2575 # i.e. applications will be loaded into RAM on the TX53 module, and this
2576 # ROM monitor may process exceptions or interrupts generated from the
2577 # application. This enables features such as utilizing a separate
2578 # interrupt stack when exceptions are generated.
2580 cdl_option CYGSEM_HAL_ROM_MONITOR {
2582 # No user value, uncomment the following line to provide one.
2584 # The inferred value should not be edited directly.
2586 # value_source inferred
2588 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2589 # CYG_HAL_STARTUP == ROMRAM
2590 # CYG_HAL_STARTUP == ROMRAM
2593 # The following properties are affected by this value
2594 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2595 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2596 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2597 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2598 # option CYGPRI_REDBOOT_ROM_MONITOR
2599 # Requires: CYGSEM_HAL_ROM_MONITOR
2602 # Work with a ROM monitor
2603 # Support can be enabled for different varieties of ROM monitor.
2604 # This support changes various eCos semantics such as the encoding
2605 # of diagnostic output, or the overriding of hardware interrupt
2607 # Firstly there is "Generic" support which prevents the HAL
2608 # from overriding the hardware vectors that it does not use, to
2609 # instead allow an installed ROM monitor to handle them. This is
2610 # the most basic support which is likely to be common to most
2611 # implementations of ROM monitor.
2612 # "GDB_stubs" provides support when GDB stubs are included in
2613 # the ROM monitor or boot ROM.
2615 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2617 # No user value, uncomment the following line to provide one.
2619 # value_source default
2620 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2621 # CYG_HAL_STARTUP == ROMRAM
2623 # Legal values: "Generic" "GDB_stubs"
2624 # Requires: CYG_HAL_STARTUP == "RAM"
2625 # CYG_HAL_STARTUP == ROMRAM
2628 # The following properties are affected by this value
2629 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2630 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2631 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2632 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2633 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2634 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2635 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2636 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2640 # Platform defined I/O channels.
2641 # Platforms which provide additional I/O channels can implement
2642 # this interface, indicating that the function plf_if_init()
2643 # needs to be called.
2645 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2646 # No options implement this inferface
2647 # This value cannot be modified here.
2652 # Platform IDE I/O support.
2653 # Platforms which provide IDE controllers can implement
2654 # this interface, indicating that IDE I/O macros are
2657 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2658 # No options implement this inferface
2659 # This value cannot be modified here.
2663 # The following properties are affected by this value
2664 # component CYGSEM_REDBOOT_DISK_IDE
2665 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2668 # File I/O operations via GDB
2669 # This option enables support for various file I/O
2670 # operations using the GDB remote protocol to communicate
2671 # with GDB. The operations are then performed on the
2672 # debugging host by proxy. These operations are only
2673 # currently available by using a system call interface
2674 # to RedBoot. This may change in the future.
2676 cdl_option CYGPKG_HAL_GDB_FILEIO {
2677 # This option is not active
2678 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2679 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2683 # No user value, uncomment the following line to provide one.
2685 # value_source default
2687 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2688 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2692 # Build Compiler sanity checking tests
2693 # Enabling this option causes compiler tests to be built.
2695 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2697 # No user value, uncomment the following line to provide one.
2699 # value_source default
2702 # The following properties are affected by this value
2703 # component CYGPKG_HAL_TESTS
2704 # Calculated: "tests/context tests/basic"
2705 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2706 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2707 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2711 # This option specifies the set of tests for the common HAL.
2713 cdl_component CYGPKG_HAL_TESTS {
2714 # Calculated value: "tests/context tests/basic"
2715 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2716 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2717 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2718 # CYGINT_HAL_TESTS_NO_CACHES == 0
2719 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2720 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2722 # Current_value: tests/context tests/basic tests/cache tests/intr
2726 # Interface for cache presence
2727 # Some architectures and/or platforms do not have caches. By
2728 # implementing this interface, these can disable the various
2729 # cache-related tests.
2731 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2732 # No options implement this inferface
2733 # This value cannot be modified here.
2735 # Current value: 0 0
2737 # The following properties are affected by this value
2738 # component CYGPKG_HAL_TESTS
2739 # Calculated: "tests/context tests/basic"
2740 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2741 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2742 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2747 # The ARM architecture HAL package provides generic
2748 # support for this processor architecture. It is also
2749 # necessary to select a specific target platform HAL
2752 cdl_package CYGPKG_HAL_ARM {
2753 # Packages cannot be added or removed, nor can their version be changed,
2754 # simply by editing their value. Instead the appropriate configuration
2755 # should be used to perform these actions.
2757 # This value cannot be modified here.
2759 # Current value: 1 current
2761 # The following properties are affected by this value
2762 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2763 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2764 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2765 # ActiveIf: CYGPKG_HAL_ARM
2769 # The CPU architecture supports THUMB mode
2771 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2772 # No options implement this inferface
2773 # This value cannot be modified here.
2777 # The following properties are affected by this value
2778 # option CYGHWR_THUMB
2779 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2780 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2781 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2784 # Enable Thumb instruction set
2785 # Enable use of the Thumb instruction set.
2787 cdl_option CYGHWR_THUMB {
2788 # This option is not active
2789 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2790 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2794 # No user value, uncomment the following line to provide one.
2796 # value_source default
2799 # The following properties are affected by this value
2800 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2801 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2804 # Enable Thumb interworking compiler option
2805 # This option controls the use of -mthumb-interwork in the
2806 # compiler flags. It defaults enabled in Thumb or ROM monitor
2807 # configurations, but can be overridden for reduced memory
2808 # footprint where interworking is not a requirement.
2810 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2811 # This option is not active
2812 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2813 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2817 # No user value, uncomment the following line to provide one.
2819 # value_source default
2820 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2822 # CYGSEM_HAL_ROM_MONITOR == 1
2826 # The platform and architecture supports Big Endian operation
2828 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2829 # No options implement this inferface
2830 # This value cannot be modified here.
2834 # The following properties are affected by this value
2835 # option CYGHWR_HAL_ARM_BIGENDIAN
2836 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2839 # Use big-endian mode
2840 # Use the CPU in big-endian mode.
2842 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2843 # This option is not active
2844 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2845 # CYGINT_HAL_ARM_BIGENDIAN == 0
2849 # No user value, uncomment the following line to provide one.
2851 # value_source default
2855 # The platform uses a processor with an ARM7 core
2857 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2858 # No options implement this inferface
2859 # This value cannot be modified here.
2863 # The following properties are affected by this value
2864 # option CYGHWR_HAL_ARM_CPU_FAMILY
2865 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2866 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2867 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2868 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2870 # option CYGHWR_HAL_ARM_CPU_FAMILY
2871 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2872 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2873 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2874 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2878 # The platform uses a processor with an ARM9 core
2880 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2881 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2882 # This value cannot be modified here.
2886 # The following properties are affected by this value
2887 # option CYGHWR_HAL_ARM_CPU_FAMILY
2888 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2889 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2890 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2891 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2901 # The platform uses a processor with a StrongARM core
2903 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2904 # No options implement this inferface
2905 # This value cannot be modified here.
2909 # The following properties are affected by this value
2910 # option CYGHWR_HAL_ARM_CPU_FAMILY
2911 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2912 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2913 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2914 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2924 # The platform uses a processor with a XScale core
2926 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2927 # No options implement this inferface
2928 # This value cannot be modified here.
2932 # The following properties are affected by this value
2933 # option CYGHWR_HAL_ARM_CPU_FAMILY
2934 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2935 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2936 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2937 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2939 # option CYGHWR_HAL_ARM_CPU_FAMILY
2940 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2948 # It is possible to optimize code for different
2949 # ARM CPU families. This option selects which CPU to
2950 # optimize for on boards that support multiple CPU types.
2952 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2954 # No user value, uncomment the following line to provide one.
2956 # value_source default
2957 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2958 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2959 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2960 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2962 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2963 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2964 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2965 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2967 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2968 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2969 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2970 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2972 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2973 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2974 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2975 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2978 # Provide diagnostic dump for exceptions
2979 # Print messages about hardware exceptions, including
2980 # raw exception frame dump and register contents.
2982 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2984 # No user value, uncomment the following line to provide one.
2986 # value_source default
2988 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2989 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2993 # Process all exceptions with the eCos application
2994 # Normal RAM-based programs which do not include GDB stubs
2995 # defer processing of the illegal instruction exception to GDB.
2996 # Setting this options allows the program to explicitly handle
2997 # the illegal instruction exception itself. Note: this will
2998 # prevent the use of GDB to debug the application as breakpoints
2999 # will no longer work.
3001 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3003 # No user value, uncomment the following line to provide one.
3005 # value_source default
3009 # Support GDB thread operations via ICE/Multi-ICE
3010 # Allow GDB to get thread information via the ICE/Multi-ICE
3013 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3015 # No user value, uncomment the following line to provide one.
3017 # value_source default
3019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3020 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3022 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3023 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3025 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3026 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3030 # Support for 'gprof' callbacks
3031 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3032 # to acquire the interrupt-context PC and SP, when this option is
3035 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3036 # This option is not active
3037 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3038 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3040 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3041 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3042 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3045 # Calculated value: 1
3050 # Accept exceptions and irq's occurring in user mode
3051 # For standalone Redboot based programs running in user mode.
3053 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3055 # No user value, uncomment the following line to provide one.
3057 # value_source default
3061 # Preserve svc spsr before returning to svc mode
3062 # This option secures exception and breakpoint processing
3063 # triggered during execution of application specific SWI
3066 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3068 # No user value, uncomment the following line to provide one.
3070 # value_source default
3076 cdl_option CYGBLD_LINKER_SCRIPT {
3077 # Calculated value: "src/arm.ld"
3079 # Current_value: src/arm.ld
3082 # Implementations of hal_arm_mem_real_region_top()
3084 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3085 # No options implement this inferface
3086 # This value cannot be modified here.
3091 # Freescale SoC architecture
3092 # This HAL variant package provides generic
3093 # support for the Freescale SoC. It is also
3094 # necessary to select a specific target platform HAL
3097 cdl_package CYGPKG_HAL_ARM_MX53 {
3098 # Packages cannot be added or removed, nor can their version be changed,
3099 # simply by editing their value. Instead the appropriate configuration
3100 # should be used to perform these actions.
3102 # This value cannot be modified here.
3104 # Current value: 1 current
3106 # The following properties are affected by this value
3107 # option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK
3108 # ActiveIf: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
3112 # Processor clock rate
3113 # The processor can run at various frequencies.
3114 # These values are expressed in KHz. Note that there are
3115 # several steppings of the rate to run at different
3116 # maximum frequencies. Check the specs to make sure that your
3117 # particular processor can run at the rate you select here.
3119 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3120 # This option is not active
3121 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3122 # CYG_HAL_STARTUP == ROMRAM
3126 # No user value, uncomment the following line to provide one.
3128 # value_source default
3129 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3130 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3131 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3132 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3134 # Legal values: 150000 200000
3137 # Real-time clock constants
3139 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3140 # There is no associated value.
3144 # Real-time clock numerator
3146 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3147 # Calculated value: 1000000000
3149 # Current_value: 1000000000
3152 # Real-time clock denominator
3153 # This option selects the heartbeat rate for the real-time clock.
3154 # The rate is specified in ticks per second. Change this value
3155 # with caution - too high and your system will become saturated
3156 # just handling clock interrupts, too low and some operations
3157 # such as thread scheduling may become sluggish.
3159 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3161 # No user value, uncomment the following line to provide one.
3163 # value_source default
3164 # Default value: 100
3166 # The following properties are affected by this value
3167 # option CYGNUM_HAL_RTC_PERIOD
3168 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3171 # Real-time clock period
3173 cdl_option CYGNUM_HAL_RTC_PERIOD {
3174 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3175 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3177 # Current_value: 36864
3181 # UART1 available as diagnostic/debug channel
3182 # The chip has multiple serial channels which may be
3183 # used for different things on different platforms. This
3184 # interface allows a platform to indicate that the specified
3185 # serial port can be used as a diagnostic and/or debug channel.
3187 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3188 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3189 # This value cannot be modified here.
3193 # The following properties are affected by this value
3196 # UART2 available as diagnostic/debug channel
3197 # The chip has multiple serial channels which may be
3198 # used for different things on different platforms. This
3199 # interface allows a platform to indicate that the specified
3200 # serial port can be used as a diagnostic and/or debug channel.
3202 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3203 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3204 # This value cannot be modified here.
3208 # The following properties are affected by this value
3211 # UART3 available as diagnostic/debug channel
3212 # The chip has multiple serial channels which may be
3213 # used for different things on different platforms. This
3214 # interface allows a platform to indicate that the specified
3215 # serial port can be used as a diagnostic and/or debug channel.
3217 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3218 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3219 # This value cannot be modified here.
3223 # The following properties are affected by this value
3226 # UART4 available as diagnostic/debug channel
3227 # The chip has multiple serial channels which may be
3228 # used for different things on different platforms. This
3229 # interface allows a platform to indicate that the specified
3230 # serial port can be used as a diagnostic and/or debug channel.
3232 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3233 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3234 # This value cannot be modified here.
3238 # The following properties are affected by this value
3241 # UART5 available as diagnostic/debug channel
3242 # The chip has multiple serial channels which may be
3243 # used for different things on different platforms. This
3244 # interface allows a platform to indicate that the specified
3245 # serial port can be used as a diagnostic and/or debug channel.
3247 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3248 # No options implement this inferface
3249 # This value cannot be modified here.
3255 # This HAL platform package provides generic
3256 # support for the Ka-Ro electronics TX53 module.
3258 cdl_package CYGPKG_HAL_ARM_TX53KARO {
3259 # Packages cannot be added or removed, nor can their version be changed,
3260 # simply by editing their value. Instead the appropriate configuration
3261 # should be used to perform these actions.
3263 # This value cannot be modified here.
3265 # Current value: 1 current
3266 # Requires: CYGINT_ISO_CTYPE
3267 # CYGINT_ISO_CTYPE == 1
3269 # Requires: CYGBLD_BUILD_REDBOOT == 1
3270 # CYGBLD_BUILD_REDBOOT == 1
3276 # The only startup type allowed is ROMRAM, since this will allow
3277 # the program to exist in ROM, but be copied to RAM during startup
3278 # which is required to boot from NAND flash.
3280 cdl_component CYG_HAL_STARTUP {
3282 # No user value, uncomment the following line to provide one.
3284 # value_source default
3285 # Default value: ROMRAM
3286 # Legal values: "ROMRAM" "RAM"
3288 # The following properties are affected by this value
3289 # option CYGSEM_HAL_ROM_MONITOR
3290 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3291 # option CYGSEM_HAL_ROM_MONITOR
3292 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3293 # option CYGSEM_HAL_USE_ROM_MONITOR
3294 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3295 # option CYGSEM_HAL_USE_ROM_MONITOR
3296 # Requires: CYG_HAL_STARTUP == "RAM"
3297 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3298 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3299 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3300 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3301 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3302 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3303 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3304 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3305 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3306 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3307 # option CYGPRI_REDBOOT_ROM_MONITOR
3308 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3309 # option CYGPRI_REDBOOT_ROM_MONITOR
3310 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3313 # Diagnostic serial port baud rate
3314 # This option selects the baud rate used for the console port.
3315 # Note: this should match the value chosen for the GDB port if the
3316 # console and GDB port are the same.
3318 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3320 # No user value, uncomment the following line to provide one.
3322 # value_source default
3323 # Default value: 115200
3324 # Legal values: 9600 19200 38400 57600 115200
3327 # GDB serial port baud rate
3328 # This option selects the baud rate used for the GDB port.
3329 # Note: this should match the value chosen for the console port if the
3330 # console and GDB port are the same.
3332 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3334 # No user value, uncomment the following line to provide one.
3336 # value_source default
3337 # Default value: 115200
3338 # Legal values: 9600 19200 38400 57600 115200
3341 # Number of communication channels on the TX53
3343 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3344 # Calculated value: 5
3348 # The following properties are affected by this value
3349 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3350 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3351 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3352 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3353 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3354 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3358 # The TX53 provides access to five serial ports. This option
3359 # chooses which port will be used to connect to a host
3362 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3363 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3364 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3368 # No user value, uncomment the following line to provide one.
3370 # value_source default
3372 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3373 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3376 # Default console channel.
3378 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3379 # Calculated value: 0
3382 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3383 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3385 # The following properties are affected by this value
3386 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3387 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3390 # Console serial port
3391 # The TX53 provides access to three serial ports. This option
3392 # chooses which port will be used for console output.
3394 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3395 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3396 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3400 # No user value, uncomment the following line to provide one.
3402 # value_source default
3403 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3404 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3406 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3407 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3410 # Ka-Ro electronics TX53 module build options
3411 # Package specific build options including control over
3412 # compiler flags used only in building this package,
3413 # and details of which tests are built.
3415 cdl_component CYGPKG_HAL_ARM_TX53_OPTIONS {
3416 # There is no associated value.
3417 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3418 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3424 # This option specifies the SDRAM size of the TX53 module.
3426 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_SIZE {
3428 user_value 0x40000000
3430 # Default value: 0x20000000
3431 # Legal values: 0x40000000 0x20000000
3435 # This option specifies the SDRAM clock im MHz of the TX53 module.
3437 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_CLK {
3439 # No user value, uncomment the following line to provide one.
3441 # value_source default
3442 # Default value: 400
3443 # Legal values: 216 266 333 400
3447 # This option specifies the CPU clock in MHz of the TX51 module.
3449 cdl_option CYGNUM_HAL_ARM_TX53_CPU_CLK {
3451 # No user value, uncomment the following line to provide one.
3453 # value_source default
3454 # Default value: 1000
3455 # Legal values: 800 1000
3458 # Enable low level debugging with LED
3459 # This option enables low level debugging by blink codes
3460 # of the LED on STK5.
3462 cdl_option CYGOPT_HAL_ARM_TX53_DEBUG {
3464 # No user value, uncomment the following line to provide one.
3466 # value_source default
3467 # Default value: false
3468 # false (unknown) == 0
3472 # Additional compiler flags
3473 # This option modifies the set of compiler flags for
3474 # building the TX53 HAL. These flags are used in addition
3475 # to the set of global flags.
3477 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_ADD {
3479 # No user value, uncomment the following line to provide one.
3481 # value_source default
3485 # Suppressed compiler flags
3486 # This option modifies the set of compiler flags for
3487 # building the TX53 HAL. These flags are removed from
3488 # the set of global flags if present.
3490 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_REMOVE {
3492 # No user value, uncomment the following line to provide one.
3494 # value_source default
3498 # Show a splash screen from the FIS partition: 'logo'
3499 # When this option is enabled, RedBoot will look for a flash partition
3500 # named 'logo' and display the contents of this partition as initial
3503 cdl_option CYGHWR_MX53_LCD_LOGO {
3504 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3505 # CYGPKG_DEVS_IMX_IPU == current
3509 # No user value, uncomment the following line to provide one.
3511 # value_source default
3518 cdl_component CYGHWR_MEMORY_LAYOUT {
3519 # Calculated value: "arm_tx53_romram"
3521 # Current_value: arm_tx53_romram
3525 # Memory layout linker script fragment
3527 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3528 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.ldi>"
3530 # Current_value: <pkgconf/mlt_arm_tx53_romram.ldi>
3533 # Memory layout header file
3535 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3536 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.h>"
3538 # Current_value: <pkgconf/mlt_arm_tx53_romram.h>
3547 # Common types and useful macros.
3548 # Tracing and assertion facilities.
3549 # Package startup options.
3551 cdl_package CYGPKG_INFRA {
3552 # Packages cannot be added or removed, nor can their version be changed,
3553 # simply by editing their value. Instead the appropriate configuration
3554 # should be used to perform these actions.
3556 # This value cannot be modified here.
3558 # Current value: 1 current
3560 # The following properties are affected by this value
3561 # package CYGPKG_HAL
3562 # Requires: CYGPKG_INFRA
3563 # component CYGBLD_BUILD_REDBOOT
3564 # Requires: CYGPKG_INFRA
3569 # The eCos source code contains a significant amount of
3570 # internal debugging support, in the form of assertions and
3572 # Assertions check at runtime that various conditions are as
3573 # expected; if not, execution is halted.
3574 # Tracing takes the form of text messages that are output
3575 # whenever certain events occur, or whenever functions are
3577 # The most important property of these checks and messages is
3578 # that they are not required for the program to run.
3579 # It is prudent to develop software with assertions enabled,
3580 # but disable them when making a product release, thus
3581 # removing the overhead of that checking.
3582 # It is possible to enable assertions and tracing
3584 # There are also options controlling the exact behaviour of
3585 # the assertion and tracing facilities, thus giving users
3586 # finer control over the code and data size requirements.
3588 cdl_component CYGPKG_INFRA_DEBUG {
3590 # No user value, uncomment the following line to provide one.
3592 # value_source default
3595 # The following properties are affected by this value
3596 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3597 # ActiveIf: CYGPKG_INFRA_DEBUG
3602 # If this option is defined, asserts in the code are tested.
3603 # Assert functions (CYG_ASSERT()) are defined in
3604 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3605 # If it is not defined, these result in no additional
3606 # object code and no checking of the asserted conditions.
3608 cdl_component CYGDBG_USE_ASSERTS {
3609 # This option is not active
3610 # The parent CYGPKG_INFRA_DEBUG is disabled
3613 # No user value, uncomment the following line to provide one.
3615 # value_source default
3617 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3618 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3621 # The following properties are affected by this value
3622 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3623 # Requires: CYGDBG_USE_ASSERTS
3624 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3625 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3630 # This option allows individual control of preconditions.
3631 # A precondition is one type of assert, which it is
3632 # useful to control separately from more general asserts.
3633 # The function is CYG_PRECONDITION(condition,msg).
3635 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3636 # This option is not active
3637 # The parent CYGDBG_USE_ASSERTS is not active
3640 # No user value, uncomment the following line to provide one.
3642 # value_source default
3647 # This option allows individual control of postconditions.
3648 # A postcondition is one type of assert, which it is
3649 # useful to control separately from more general asserts.
3650 # The function is CYG_POSTCONDITION(condition,msg).
3652 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3653 # This option is not active
3654 # The parent CYGDBG_USE_ASSERTS is not active
3657 # No user value, uncomment the following line to provide one.
3659 # value_source default
3664 # This option allows individual control of loop invariants.
3665 # A loop invariant is one type of assert, which it is
3666 # useful to control separately from more general asserts,
3667 # particularly since a loop invariant is typically evaluated
3668 # a great many times when used correctly.
3669 # The function is CYG_LOOP_INVARIANT(condition,msg).
3671 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3672 # This option is not active
3673 # The parent CYGDBG_USE_ASSERTS is not active
3676 # No user value, uncomment the following line to provide one.
3678 # value_source default
3683 # All assertions within eCos contain a text message
3684 # which should give some information about the condition
3686 # These text messages will end up being embedded in the
3687 # application image and hence there is a significant penalty
3688 # in terms of image size.
3689 # It is possible to suppress the use of these messages by
3690 # disabling this option.
3691 # This results in smaller code size, but there is less
3692 # human-readable information if an assertion actually gets
3695 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3696 # This option is not active
3697 # The parent CYGDBG_USE_ASSERTS is not active
3700 # No user value, uncomment the following line to provide one.
3702 # value_source default
3708 # If this option is defined, tracing operations
3709 # result in output or logging, depending on other options.
3710 # This may have adverse effects on performance, if the time
3711 # taken to output message overwhelms the available CPU
3712 # power or output bandwidth.
3713 # Trace functions (CYG_TRACE()) are defined in
3714 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3715 # If it is not defined, these result in no additional
3716 # object code and no trace information.
3718 cdl_component CYGDBG_USE_TRACING {
3719 # This option is not active
3720 # The parent CYGPKG_INFRA_DEBUG is disabled
3723 # No user value, uncomment the following line to provide one.
3725 # value_source default
3727 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3728 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3731 # The following properties are affected by this value
3732 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3733 # ActiveIf: CYGDBG_USE_TRACING
3734 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3735 # ActiveIf: CYGDBG_USE_TRACING
3736 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3737 # ActiveIf: CYGDBG_USE_TRACING
3738 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3739 # ActiveIf: CYGDBG_USE_TRACING
3740 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3741 # ActiveIf: CYGDBG_USE_TRACING
3745 # Trace function reports
3746 # This option allows individual control of
3747 # function entry/exit tracing, independent of
3748 # more general tracing output.
3749 # This may be useful to remove clutter from a
3752 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3753 # This option is not active
3754 # The parent CYGDBG_USE_TRACING is not active
3755 # The parent CYGDBG_USE_TRACING is disabled
3758 # No user value, uncomment the following line to provide one.
3760 # value_source default
3765 # All trace calls within eCos contain a text message
3766 # which should give some information about the circumstances.
3767 # These text messages will end up being embedded in the
3768 # application image and hence there is a significant penalty
3769 # in terms of image size.
3770 # It is possible to suppress the use of these messages by
3771 # disabling this option.
3772 # This results in smaller code size, but there is less
3773 # human-readable information available in the trace output,
3774 # possibly only filenames and line numbers.
3776 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3777 # This option is not active
3778 # The parent CYGDBG_USE_TRACING is not active
3779 # The parent CYGDBG_USE_TRACING is disabled
3782 # No user value, uncomment the following line to provide one.
3784 # value_source default
3789 # Trace output implementations
3791 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3792 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3793 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3794 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3795 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3796 # This option is not active
3797 # The parent CYGPKG_INFRA_DEBUG is disabled
3799 # This value cannot be modified here.
3803 # The following properties are affected by this value
3804 # component CYGDBG_USE_ASSERTS
3805 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3806 # component CYGDBG_USE_TRACING
3807 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3811 # A null output module which is useful when
3812 # debugging interactively; the output routines
3813 # can be breakpointed rather than have them actually
3814 # 'print' something.
3816 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3817 # This option is not active
3818 # The parent CYGPKG_INFRA_DEBUG is disabled
3821 # No user value, uncomment the following line to provide one.
3823 # value_source default
3828 # An output module which produces simple output
3829 # from tracing and assertion events.
3831 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3832 # This option is not active
3833 # The parent CYGPKG_INFRA_DEBUG is disabled
3836 # No user value, uncomment the following line to provide one.
3838 # value_source default
3843 # An output module which produces fancy output
3844 # from tracing and assertion events.
3846 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3847 # This option is not active
3848 # The parent CYGPKG_INFRA_DEBUG is disabled
3851 # No user value, uncomment the following line to provide one.
3853 # value_source default
3858 # An output module which buffers output
3859 # from tracing and assertion events. The stored
3860 # messages are output when an assert fires, or
3861 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3863 # Of course, there will only be stored messages
3864 # if tracing per se (CYGDBG_USE_TRACING)
3867 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3868 # This option is not active
3869 # The parent CYGPKG_INFRA_DEBUG is disabled
3872 # No user value, uncomment the following line to provide one.
3874 # value_source default
3880 # The size of the trace buffer. This counts the number
3881 # of trace records stored. When the buffer fills it
3882 # either wraps, stops recording, or generates output.
3884 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3885 # This option is not active
3886 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3887 # ActiveIf constraint: CYGDBG_USE_TRACING
3888 # CYGDBG_USE_TRACING == 0
3892 # No user value, uncomment the following line to provide one.
3894 # value_source default
3896 # Legal values: 5 to 65535
3899 # Wrap trace buffer when full
3900 # When the trace buffer has filled with records it
3901 # starts again at the beginning. Hence only the last
3902 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3905 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3906 # This option is not active
3907 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3908 # ActiveIf constraint: CYGDBG_USE_TRACING
3909 # CYGDBG_USE_TRACING == 0
3913 # No user value, uncomment the following line to provide one.
3915 # value_source default
3919 # Halt trace buffer when full
3920 # When the trace buffer has filled with records it
3921 # stops recording. Hence only the first
3922 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3925 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3926 # This option is not active
3927 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3928 # ActiveIf constraint: CYGDBG_USE_TRACING
3929 # CYGDBG_USE_TRACING == 0
3933 # No user value, uncomment the following line to provide one.
3935 # value_source default
3939 # Print trace buffer when full
3940 # When the trace buffer has filled with records it
3941 # prints the contents of the buffer. The buffer is then
3942 # emptied and the system continues.
3944 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3945 # This option is not active
3946 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3947 # ActiveIf constraint: CYGDBG_USE_TRACING
3948 # CYGDBG_USE_TRACING == 0
3952 # No user value, uncomment the following line to provide one.
3954 # value_source default
3958 # Print trace buffer on assert fail
3959 # When an assertion fails the trace buffer will be
3960 # printed to the default diagnostic device.
3962 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3963 # This option is not active
3964 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3965 # ActiveIf constraint: CYGDBG_USE_TRACING
3966 # CYGDBG_USE_TRACING == 0
3970 # No user value, uncomment the following line to provide one.
3972 # value_source default
3977 # Use function names
3978 # All trace and assert calls within eCos contain a
3979 # reference to the builtin macro '__PRETTY_FUNCTION__',
3980 # which evaluates to a string containing
3981 # the name of the current function.
3982 # This is useful when reading a trace log.
3983 # It is possible to suppress the use of the function name
3984 # by disabling this option.
3985 # This results in smaller code size, but there is less
3986 # human-readable information available in the trace output,
3987 # possibly only filenames and line numbers.
3989 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3990 # This option is not active
3991 # The parent CYGPKG_INFRA_DEBUG is disabled
3994 # No user value, uncomment the following line to provide one.
3996 # value_source default
4002 # Some packages require a startup routine to be called.
4003 # This can be carried out by application code, by supplying
4004 # a routine called cyg_package_start() which calls the
4005 # appropriate package startup routine(s).
4006 # Alternatively, this routine can be constructed automatically
4007 # and configured to call the startup routines of your choice.
4009 cdl_component CYGPKG_INFRA_STARTUP {
4010 # There is no associated value.
4014 # Start uITRON subsystem
4015 # Generate a call to initialize the
4016 # uITRON compatibility subsystem
4017 # within the system version of cyg_package_start().
4018 # This enables compatibility with uITRON.
4019 # You must configure uITRON with the correct tasks before
4020 # starting the uItron subsystem.
4021 # If this is disabled, and you want to use uITRON,
4022 # you must call cyg_uitron_start() from your own
4023 # cyg_package_start() or cyg_userstart().
4025 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4026 # This option is not active
4027 # ActiveIf constraint: CYGPKG_UITRON
4028 # CYGPKG_UITRON (unknown) == 0
4032 # No user value, uncomment the following line to provide one.
4034 # value_source default
4036 # Requires: CYGPKG_UITRON
4037 # CYGPKG_UITRON (unknown) == 0
4042 # Smaller slower memcpy()
4043 # Enabling this option causes the implementation of
4044 # the standard memcpy() routine to reduce code
4045 # size at the expense of execution speed. This
4046 # option is automatically enabled with the use of
4047 # the -Os option to the compiler. Also note that
4048 # the compiler will try to use its own builtin
4049 # version of memcpy() if possible, ignoring the
4050 # implementation in this package, unless given
4051 # the -fno-builtin compiler option.
4053 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4055 # No user value, uncomment the following line to provide one.
4057 # value_source default
4061 # Smaller slower memset()
4062 # Enabling this option causes the implementation of
4063 # the standard memset() routine to reduce code
4064 # size at the expense of execution speed. This
4065 # option is automatically enabled with the use of
4066 # the -Os option to the compiler. Also note that
4067 # the compiler will try to use its own builtin
4068 # version of memset() if possible, ignoring the
4069 # implementation in this package, unless given
4070 # the -fno-builtin compiler option.
4072 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4074 # No user value, uncomment the following line to provide one.
4076 # value_source default
4080 # Provide empty C++ delete functions
4081 # To deal with virtual destructors, where the correct delete()
4082 # function must be called for the derived class in question, the
4083 # underlying delete is called when needed, from destructors. This
4084 # is regardless of whether the destructor is called by delete itself.
4085 # So there is a reference to delete() from all destructors. The
4086 # default builtin delete() attempts to call free() if there is
4087 # one defined. So, if you have destructors, and you have free(),
4088 # as in malloc() and free(), any destructor counts as a reference
4089 # to free(). So the dynamic memory allocation code is linked
4090 # in regardless of whether it gets explicitly called. This
4091 # increases code and data size needlessly.
4092 # To defeat this undesirable behaviour, we define empty versions
4093 # of delete and delete. But doing this prevents proper use
4094 # of dynamic memory in C++ programs via C++'s new and delete
4096 # Therefore, this option is provided
4097 # for explicitly disabling the provision of these empty functions,
4098 # so that new and delete can be used, if that is what is required.
4100 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4102 # No user value, uncomment the following line to provide one.
4104 # value_source default
4108 # Threshold for valid number of delete calls
4109 # Some users don't know about the empty delete function and then
4110 # wonder why their C++ classes are leaking memory. If
4111 # INFRA_DEBUG is enabled we keep a counter for the number of
4112 # times delete is called. If it goes above this threshold we throw
4113 # an assertion failure. This should point heavy users of
4114 # delete in the right direction without upsetting those who want
4115 # an empty delete function.
4117 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4118 # This option is not active
4119 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4120 # CYGPKG_INFRA_DEBUG == 0
4124 # No user value, uncomment the following line to provide one.
4126 # value_source default
4127 # Default value: 100
4130 # Provide dummy abort() function
4131 # This option controls the inclusion of a dummy abort() function.
4132 # Parts of the C and C++ compiler runtime systems contain references
4133 # to abort(), particulary in the C++ exception handling code. It is
4134 # not possible to eliminate these references, so this dummy function
4135 # in included to satisfy them. It is not expected that this function
4136 # will ever be called, so its current behaviour is to simply loop.
4138 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4140 # No user value, uncomment the following line to provide one.
4142 # value_source default
4143 # Default value: CYGINT_ISO_EXIT == 0
4144 # CYGINT_ISO_EXIT == 0
4146 # Requires: !CYGINT_ISO_EXIT
4147 # CYGINT_ISO_EXIT == 0
4151 # Reset platform at end of test case execution
4152 # If this option is set then test case programs will reset the platform
4153 # when they terminate, as opposed to the default which is to just hang
4156 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4158 # No user value, uncomment the following line to provide one.
4160 # value_source default
4164 # Provide dummy strlen() function
4165 # This option controls the inclusion of a dummy strlen() function.
4166 # Parts of the C and C++ compiler runtime systems contain references
4167 # to strlen(), particulary in the C++ exception handling code. It is
4168 # not possible to eliminate these references, so this dummy function
4169 # in included to satisfy them. While it is not expected that this function
4170 # will ever be called, it is functional but uses the simplest, smallest
4171 # algorithm. There is a faster version of strlen() in the C library.
4173 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4175 # No user value, uncomment the following line to provide one.
4177 # value_source default
4178 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4179 # CYGINT_ISO_STRING_STRFUNCS == 1
4181 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4182 # CYGINT_ISO_STRING_STRFUNCS == 1
4186 # Make all compiler warnings show as errors
4187 # Enabling this option will cause all compiler warnings to show
4188 # as errors and bring the library build to a halt. This is used
4189 # to ensure that the code base is warning free, and thus ensure
4190 # that newly introduced warnings stand out and get fixed before
4191 # they show up as weird run-time behavior.
4193 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4198 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4199 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4202 # The following properties are affected by this value
4203 # option CYGBLD_GLOBAL_CFLAGS
4204 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4207 # Make compiler and assembler communicate by pipe
4208 # Enabling this option will cause the compiler to feed the
4209 # assembly output the the assembler via a pipe instead of
4210 # via a temporary file. This normally reduces the build
4213 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4218 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4219 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4223 # Infra build options
4224 # Package specific build options including control over
4225 # compiler flags used only in building this package.
4227 cdl_component CYGPKG_INFRA_OPTIONS {
4228 # There is no associated value.
4232 # Additional compiler flags
4233 # This option modifies the set of compiler flags for
4234 # building the eCos infra package. These flags are used
4235 # in addition to the set of global flags.
4237 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4239 # No user value, uncomment the following line to provide one.
4240 # user_value "-fno-rtti -Woverloaded-virtual"
4241 # value_source default
4242 # Default value: "-fno-rtti -Woverloaded-virtual"
4245 # Suppressed compiler flags
4246 # This option modifies the set of compiler flags for
4247 # building the eCos infra package. These flags are removed from
4248 # the set of global flags if present.
4250 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4252 # No user value, uncomment the following line to provide one.
4253 # user_value -Wno-pointer-sign
4254 # value_source default
4255 # Default value: -Wno-pointer-sign
4258 # Suppressed linker flags
4259 # This option modifies the set of linker flags for
4260 # building the eCos infra package tests. These flags are removed from
4261 # the set of global flags if present.
4263 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4265 # No user value, uncomment the following line to provide one.
4266 # user_value -Wl,--gc-sections
4267 # value_source default
4268 # Default value: -Wl,--gc-sections
4271 # Additional linker flags
4272 # This option modifies the set of linker flags for
4273 # building the eCos infra package tests. These flags are added to
4274 # the set of global flags if present.
4276 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4278 # No user value, uncomment the following line to provide one.
4279 # user_value -Wl,--fatal-warnings
4280 # value_source default
4281 # Default value: -Wl,--fatal-warnings
4284 # Infra package tests
4286 cdl_component CYGPKG_INFRA_TESTS {
4287 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4289 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4293 # Number of times a test runs
4294 # This option controls the number of times tests will execute their
4295 # basic function. Not all tests will honor this setting, but those
4296 # that do will execute the test N times before terminating. A value
4297 # less than 0 indicates to run forever.
4299 cdl_option CYGNUM_TESTS_RUN_COUNT {
4301 # No user value, uncomment the following line to provide one.
4303 # value_source default
4310 # Redboot ROM monitor
4311 # doc: ref/redboot.html
4312 # This package supports the Redboot [stand-alone debug monitor]
4313 # using eCos as the underlying board support mechanism.
4315 cdl_package CYGPKG_REDBOOT {
4316 # Packages cannot be added or removed, nor can their version be changed,
4317 # simply by editing their value. Instead the appropriate configuration
4318 # should be used to perform these actions.
4320 # This value cannot be modified here.
4322 # Current value: 1 current
4323 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4324 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4327 # The following properties are affected by this value
4328 # component CYGPKG_REDBOOT_ARM_OPTIONS
4329 # ActiveIf: CYGPKG_REDBOOT
4330 # component CYGPKG_REDBOOT_HAL_OPTIONS
4331 # ActiveIf: CYGPKG_REDBOOT
4332 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
4333 # ActiveIf: CYGPKG_REDBOOT
4334 # option CYGSEM_IO_ETH_DRIVERS_WARN
4335 # ActiveIf: CYGPKG_REDBOOT
4339 # Include support for ELF file format
4341 cdl_component CYGSEM_REDBOOT_ELF {
4343 # No user value, uncomment the following line to provide one.
4345 # value_source default
4350 # Use the virtual address in the ELF headers
4351 # The ELF headers contain both a virtual and a physical address
4352 # for where code/data should be loaded. By default the physical
4353 # address is used but sometimes it is necassary to use the
4354 # virtual address because of bugy toolchains
4356 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4358 # No user value, uncomment the following line to provide one.
4360 # value_source default
4365 # Methods of loading images using redboot
4367 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4368 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4369 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4370 # This value cannot be modified here.
4374 # The following properties are affected by this value
4375 # component CYGBLD_BUILD_REDBOOT
4376 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4379 # Build Redboot ROM ELF image
4380 # This option enables the building of the Redboot ELF image.
4381 # The image may require further relocation or symbol
4382 # stripping before being converted to a binary image.
4383 # This is handled by a rule in the target CDL.
4385 cdl_component CYGBLD_BUILD_REDBOOT {
4387 # No user value, uncomment the following line to provide one.
4389 # The inferred value should not be edited directly.
4391 # value_source inferred
4393 # Requires: CYGPKG_INFRA
4394 # CYGPKG_INFRA == current
4396 # Requires: CYGPKG_ISOINFRA
4397 # CYGPKG_ISOINFRA == current
4399 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4400 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4402 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4403 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4405 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4406 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4408 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4409 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4411 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4412 # CYGINT_ISO_STRING_MEMFUNCS == 1
4414 # Requires: CYGINT_ISO_STRING_STRFUNCS
4415 # CYGINT_ISO_STRING_STRFUNCS == 1
4417 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4418 # CYGINT_REDBOOT_LOAD_METHOD == 2
4421 # The following properties are affected by this value
4422 # package CYGPKG_HAL_ARM_TX53KARO
4423 # Requires: CYGBLD_BUILD_REDBOOT == 1
4424 # option CYGBLD_BUILD_REDBOOT_BIN
4425 # ActiveIf: CYGBLD_BUILD_REDBOOT
4429 # Include GDB support in RedBoot
4430 # RedBoot normally includes support for the GDB debugging
4431 # protocols. This option allows this to be disabled which
4432 # may yield a substantial savings in terms of code and memory
4435 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4436 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4437 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4442 # The inferred value should not be edited directly.
4446 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4447 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4449 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4450 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4454 # Threads debugging support
4455 # Enabling this option will include special code in the
4456 # GDB stubs to support debugging of threaded programs. In
4457 # the case of eCos programs, this support allows GDB to
4458 # have complete access to the eCos threads in the
4461 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4462 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4463 # CYG_HAL_STARTUP == ROMRAM
4467 # No user value, uncomment the following line to provide one.
4469 # value_source default
4471 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4472 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4476 # Customized version string
4477 # Use this option to define a customized version "string" for
4478 # RedBoot. Note: this value is only cosmetic, displayed by the
4479 # "version" command, but is useful for providing site specific
4480 # information about the RedBoot configuration.
4482 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4484 # No user value, uncomment the following line to provide one.
4486 # The inferred value should not be edited directly.
4487 inferred_value 1 "Ka-Ro 2010-01-06"
4488 # value_source inferred
4489 # Default value: 0 0
4492 # Enable command line editing
4493 # If this option is non-zero, RedBoot will remember the
4494 # last N command lines. These lines may be reused.
4495 # Enabling this history will also enable rudimentary
4496 # editting of the lines themselves.
4498 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4500 # No user value, uncomment the following line to provide one.
4502 # value_source default
4505 # The following properties are affected by this value
4506 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4507 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4508 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4509 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4512 # Enable command line editing using ANSI arrows, etc
4513 # If this option is enabled, RedBoot will accept standard ANSI key
4514 # sequences for cursor movement (along with the emacs style keys).
4516 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4517 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4518 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4522 # No user value, uncomment the following line to provide one.
4524 # value_source default
4528 # Enable history command and expansion
4529 # Enabling this option will allow RedBoot to provide a
4530 # history command to list previous commands. Also enables
4531 # history expansion via '!' character similar to bash
4534 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4536 # No user value, uncomment the following line to provide one.
4538 # value_source default
4540 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4541 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4545 # Number of unique RAM segments on platform
4546 # Change this option to be the number of memory segments which are
4547 # supported by the platform. If the value is greater than 1, then
4548 # a platform specific function must provide information about the
4549 # additional segments.
4551 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4553 # No user value, uncomment the following line to provide one.
4555 # value_source default
4559 # Include support gzip/zlib decompression
4561 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4562 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4563 # CYGPKG_COMPRESS_ZLIB == current
4567 # No user value, uncomment the following line to provide one.
4569 # value_source default
4572 # The following properties are affected by this value
4573 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4574 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4578 # Size of zlib decompression buffer
4579 # This is the size of the buffer filled with incoming data
4580 # during load before calls are made to the decompressor
4581 # function. For ethernet downloads this can be made bigger
4582 # (at the cost of memory), but for serial downloads on slow
4583 # processors it may be necessary to reduce the size to
4584 # avoid serial overruns. zlib appears to bail out if less
4585 # than five bytes are available initially so this is the
4588 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4590 # No user value, uncomment the following line to provide one.
4592 # value_source default
4594 # Legal values: 5 to 256
4597 # Support compression of Flash images
4598 # This CDL indicates whether flash images can
4599 # be decompressed from gzip/zlib format into RAM.
4601 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4602 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4603 # CYGPKG_REDBOOT_FLASH == 1
4605 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4606 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4607 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4610 # Calculated value: 1
4615 # Include GZIP uncompress command
4616 # Enable this option to include a 'gunzip' command
4617 # to uncompress GZIP compressed data.
4619 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4621 # No user value, uncomment the following line to provide one.
4623 # value_source default
4627 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4628 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4630 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4632 # No user value, uncomment the following line to provide one.
4634 # The inferred value should not be edited directly.
4636 # value_source inferred
4639 # The following properties are affected by this value
4640 # option CYGPRI_REDBOOT_ZLIB_FLASH
4641 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4645 # Include support for xyzModem downloads
4646 # doc: ref/download-command.html
4648 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4650 # No user value, uncomment the following line to provide one.
4652 # value_source default
4655 # The following properties are affected by this value
4656 # option CYGPKG_REDBOOT_CFLAGS_ADD
4657 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4660 # Additional compiler flags
4661 # This option modifies the set of compiler flags for
4662 # building the eCos infra package. These flags are used
4663 # in addition to the set of global flags.
4665 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4666 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4667 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4671 # No user value, uncomment the following line to provide one.
4672 # user_value -Wno-inline
4673 # value_source default
4674 # Default value: -Wno-inline
4677 # Allow the load-command write into Flash.
4678 # Write images direct to Flash via the load command.
4679 # We assume anything which is invalid RAM is flash, hence
4680 # the requires statement
4682 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4683 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4684 # CYGPKG_REDBOOT_FLASH == 1
4688 # No user value, uncomment the following line to provide one.
4690 # value_source default
4692 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4693 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4697 # Include MS Windows CE support
4698 # doc: ref/wince.html
4699 # This option enables MS Windows CE EShell support
4700 # and Windows CE .BIN images support
4702 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4709 # Include support for MXC USB downloads
4711 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4713 # No user value, uncomment the following line to provide one.
4715 # value_source default
4719 # Include support for i.MX USB OTG downloads
4721 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4723 # No user value, uncomment the following line to provide one.
4725 # value_source default
4729 # Include POSIX checksum command
4730 # doc: ref/cksum-command.html
4732 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4734 # No user value, uncomment the following line to provide one.
4736 # value_source default
4740 # Include memory fill command
4741 # doc: ref/mfill-command.html
4743 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4745 # No user value, uncomment the following line to provide one.
4747 # value_source default
4751 # Include memory compare command
4752 # doc: ref/mcmp-command.html
4754 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4756 # No user value, uncomment the following line to provide one.
4758 # value_source default
4762 # Include memory copy command
4763 # doc: ref/mcopy-command.html
4765 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4767 # No user value, uncomment the following line to provide one.
4769 # value_source default
4773 # Include memory dump command
4774 # doc: ref/dump-command.html
4776 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4778 # No user value, uncomment the following line to provide one.
4780 # value_source default
4784 # Include cache command
4785 # doc: ref/cache-command.html
4787 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4789 # No user value, uncomment the following line to provide one.
4791 # value_source default
4795 # Include exec command
4796 # doc: ref/exec-command.html
4798 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4800 # No user value, uncomment the following line to provide one.
4802 # value_source default
4805 # The following properties are affected by this value
4806 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4807 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4810 # Include I/O Memory commands 'iopeek' and 'iopoke'
4812 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4814 # No user value, uncomment the following line to provide one.
4816 # value_source default
4820 # Granularity of timer/ticks
4821 # This option controls the granularity of the timers.
4822 # Faster CPUs can afford higher granularity (lower values)
4823 # which should give higher network performance since the stack
4826 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4828 # No user value, uncomment the following line to provide one.
4830 # value_source default
4831 # Default value: 250
4832 # Legal values: 10 25 50 100 250 500 1000
4835 # Redboot Networking
4836 # This option includes networking support in RedBoot.
4838 cdl_component CYGPKG_REDBOOT_NETWORKING {
4839 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4840 # CYGPKG_IO_ETH_DRIVERS == current
4844 # No user value, uncomment the following line to provide one.
4846 # value_source default
4849 # The following properties are affected by this value
4850 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4851 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4855 # Print net debug information
4856 # This option is overriden by the configuration stored
4859 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4861 # No user value, uncomment the following line to provide one.
4863 # value_source default
4867 # Support TFTP for download
4868 # This option enables the use of the TFTP protocol for
4871 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4873 # No user value, uncomment the following line to provide one.
4875 # value_source default
4879 # Support HTTP for download
4880 # This option enables the use of the HTTP protocol for
4883 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4890 # Default IP address
4891 # This IP address is the default used by RedBoot if
4892 # a BOOTP/DHCP server does not respond. The numbers
4893 # should be separated by *commas*, and not dots. If
4894 # an IP address is configured into the Flash
4895 # configuration, that will be used in preference.
4897 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4899 # No user value, uncomment the following line to provide one.
4901 # value_source default
4902 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4903 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4908 # Do not try to use BOOTP
4909 # By default Redboot tries to use BOOTP to get an IP
4910 # address. If there's no BOOTP server on your network
4911 # use this option to avoid to wait until the
4912 # timeout. This option is overriden by the
4913 # configuration stored in flash.
4915 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4916 # This option is not active
4917 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4920 # No user value, uncomment the following line to provide one.
4922 # value_source default
4926 # Default bootp server
4927 # This IP address is the default server
4928 # address used by RedBoot if a BOOTP/DHCP
4929 # server does not respond. The numbers should
4930 # be separated by *commas*, and not dots. If
4931 # an IP address is configured into the Flash
4932 # configuration, that will be used in
4935 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4936 # This option is not active
4937 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4940 # No user value, uncomment the following line to provide one.
4942 # value_source default
4943 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4944 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4949 # Use DHCP to get IP information
4950 # Use DHCP protocol to obtain pertinent IP addresses, such
4951 # as the client, server, gateway, etc.
4953 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4955 # No user value, uncomment the following line to provide one.
4957 # value_source default
4960 # The following properties are affected by this value
4961 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4962 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4965 # Use a gateway for non-local IP traffic
4966 # Enabling this option will allow the RedBoot networking
4967 # stack to use a [single] gateway to reach a non-local
4968 # IP address. If disabled, RedBoot will only be able to
4969 # reach nodes on the same subnet.
4971 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4973 # No user value, uncomment the following line to provide one.
4975 # value_source default
4977 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4978 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4983 # Default gateway IP address
4984 # This IP address is the default used by RedBoot
4985 # if a BOOTP/DHCP server does not respond. The
4986 # numbers should be separated by *commas*, and
4987 # not dots. If an IP address is configured into
4988 # the Flash configuration, that will be used in
4991 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4993 # No user value, uncomment the following line to provide one.
4995 # value_source default
4996 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4997 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5001 # Default IP address mask
5002 # This IP address mask is the default used by
5003 # RedBoot if a BOOTP/DHCP server does not
5004 # respond. The numbers should be separated by
5005 # *commas*, and not dots. If an IP address is
5006 # configured into the Flash configuration, that
5007 # will be used in preference.
5009 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5011 # No user value, uncomment the following line to provide one.
5013 # value_source default
5014 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5015 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5020 # TCP port to listen for incoming connections
5021 # RedBoot will 'listen' on this port for incoming TCP
5022 # connections. This allows outside connections to be made
5023 # to the platform, either for GDB or RedBoot commands.
5025 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5027 # No user value, uncomment the following line to provide one.
5029 # value_source default
5030 # Default value: 9000
5033 # Number of [network] packet buffers
5034 # RedBoot may need to buffer network data to support
5035 # various connections. This option allows control
5036 # over the number of such buffered packets, and in
5037 # turn, controls the amount of memory used by RedBoot
5038 # (which is not available to user applications).
5039 # Each packet buffer takes up about 1514 bytes.
5040 # Note: there is little need to make this larger than
5043 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5045 # No user value, uncomment the following line to provide one.
5047 # value_source default
5049 # Legal values: 3 to 8
5053 # When this option is enabled, RedBoot will be built with
5054 # support for DNS, allowing use of hostnames on the command
5057 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5058 # This option is not active
5059 # ActiveIf constraint: CYGPKG_NS_DNS
5060 # CYGPKG_NS_DNS (unknown) == 0
5064 # No user value, uncomment the following line to provide one.
5066 # value_source default
5068 # Requires: !CYGPKG_NS_DNS_BUILD
5069 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5075 # This option sets the IP of the default DNS. The IP can be
5076 # changed at runtime as well.
5078 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5079 # This option is not active
5080 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5081 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5082 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5086 # No user value, uncomment the following line to provide one.
5087 # user_value 0.0.0.0
5088 # value_source default
5089 # Default value: 0.0.0.0
5092 # Timeout in DNS lookup
5093 # This option sets the timeout used when looking up an
5094 # address via the DNS. Default is 10 seconds.
5096 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5097 # This option is not active
5098 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5101 # No user value, uncomment the following line to provide one.
5103 # value_source default
5107 # Support the use of a domain name
5108 # This option controls if Redboot supports domain
5109 # names when performing DNS lookups
5111 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5112 # This option is not active
5113 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5116 # No user value, uncomment the following line to provide one.
5118 # value_source default
5123 # Default DNS domain
5124 # This option sets the default DNS domain name.
5125 # This value will be overwritten by the value in
5126 # flash or a domain returned by DHCP
5128 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5129 # This option is not active
5130 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5131 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5134 # No user value, uncomment the following line to provide one.
5136 # value_source default
5137 # Default value: 0 0
5140 # Get DNS domain from Flash
5141 # This option enables getting the domain name
5142 # from the flash configuration. This can later be
5143 # overwritten by a value learnt from DHCP
5145 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5146 # This option is not active
5147 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5148 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5149 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5150 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5154 # No user value, uncomment the following line to provide one.
5156 # value_source default
5160 # Use DNS domain from DHCP
5161 # This option enables the use of the domain name
5164 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5165 # This option is not active
5166 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5167 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5170 # No user value, uncomment the following line to provide one.
5172 # value_source default
5176 # BOOTP/DHCP DNS domain buffer size
5177 # This options sets the size of the static
5178 # buffer used by BOOTP/DHCP to store the DNS
5179 # domain name. The domain name will not be
5180 # set if the buffer is too small to hold it.
5182 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5183 # This option is not active
5184 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5185 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5188 # No user value, uncomment the following line to provide one.
5190 # value_source default
5196 # Default network device driver
5197 # This is the name of the default network device to use.
5199 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5200 # This option is not active
5201 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5202 # CYGHWR_NET_DRIVERS == 1
5206 # No user value, uncomment the following line to provide one.
5208 # value_source default
5209 # Default value: "\"\""
5212 # Initialize only one net device
5213 # This option tells RedBoot to stop initializing network
5214 # devices when it finds the first device which is
5215 # successfully initialized. The default behavior causes
5216 # all network devices to be initialized.
5218 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5219 # This option is not active
5220 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5221 # CYGHWR_NET_DRIVERS == 1
5225 # No user value, uncomment the following line to provide one.
5227 # value_source default
5232 # Let RedBoot use any I/O channel for its console.
5233 # If this option is enabled then RedBoot will attempt to use all
5234 # defined serial I/O channels for its console device. Once input
5235 # arrives at one of these channels then the console will use only
5238 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5240 # No user value, uncomment the following line to provide one.
5242 # The inferred value should not be edited directly.
5244 # value_source inferred
5248 # Let RedBoot adjust the baud rate of the serial console.
5249 # If this option is enabled then RedBoot will support commands
5250 # to set and query the baud rate on the selected console.
5252 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5253 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5254 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5258 # No user value, uncomment the following line to provide one.
5260 # value_source default
5264 # Run a platform specific startup function.
5265 # If this option is enabled then RedBoot will execute a platform
5266 # specific startup function before entering into its command line
5267 # processing. This allows the platform to perform any special
5268 # setups before RedBoot actually starts running. Note: the entire
5269 # RedBoot environment will already be initialized at this point.
5271 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5273 # No user value, uncomment the following line to provide one.
5275 # value_source default
5279 # Run a platform specific ESA validation function.
5280 # If this option is enabled then RedBoot will execute a platform
5281 # specific function to validate an ethernet ESA. This would be
5282 # useful if the address must conform to standards set by the
5283 # hardware manufacturer, etc.
5285 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5287 # No user value, uncomment the following line to provide one.
5289 # The inferred value should not be edited directly.
5291 # value_source inferred
5294 # The following properties are affected by this value
5295 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5296 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5297 # option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI
5298 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5301 # Maximum command line length
5302 # This option allows control over how long the CLI command line
5303 # should be. This space will be allocated statically
5304 # rather than from RedBoot's stack.
5306 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5308 # No user value, uncomment the following line to provide one.
5310 # The inferred value should not be edited directly.
5312 # value_source inferred
5313 # Default value: 256
5316 # Command processing idle timeout (ms)
5317 # This option controls the timeout period before the
5318 # command processing is considered 'idle'. Making this
5319 # number smaller will cause idle processing to take place
5320 # more often, etc. The default value of 10ms is a reasonable
5321 # tradeoff between responsiveness and overhead.
5323 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5325 # No user value, uncomment the following line to provide one.
5327 # value_source default
5331 # Validate RAM addresses during load
5332 # This option controls whether or not RedBoot will make
5333 # sure that memory being used by the "load" command is
5334 # in fact in user RAM. Leaving the option enabled makes
5335 # for a safer environment, but this check may not be valid
5336 # on all platforms, thus the ability to disable it.
5337 # ** Disable this only with great care **
5339 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5341 # No user value, uncomment the following line to provide one.
5343 # value_source default
5346 # The following properties are affected by this value
5347 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5348 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5351 # Allow RedBoot to support FLASH programming
5352 # If this option is enabled then RedBoot will provide commands
5353 # to manage images in FLASH memory. These images can be loaded
5354 # into memory for execution or executed in place.
5356 cdl_component CYGPKG_REDBOOT_FLASH {
5357 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5358 # CYGHWR_IO_FLASH_DEVICE == 1
5362 # No user value, uncomment the following line to provide one.
5364 # value_source default
5367 # The following properties are affected by this value
5368 # option CYGPRI_REDBOOT_ZLIB_FLASH
5369 # ActiveIf: CYGPKG_REDBOOT_FLASH
5370 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5371 # ActiveIf: CYGPKG_REDBOOT_FLASH
5375 # Byte order used to store info in flash.
5376 # This option controls the byte ordering used to store
5377 # the FIS directory info and flash config info.
5379 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5381 # No user value, uncomment the following line to provide one.
5382 # user_value NATURAL
5383 # value_source default
5384 # Default value: NATURAL
5385 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5388 # RedBoot Flash Image System support
5389 # doc: ref/flash-image-system.html
5390 # This option enables the Flash Image System commands
5391 # and support within RedBoot. If disabled, simple Flash
5392 # access commands such as "fis write" will still exist.
5393 # This option would be disabled for targets that need simple
5394 # FLASH manipulation, but do not have the need or space for
5395 # complete image management.
5397 cdl_option CYGOPT_REDBOOT_FIS {
5399 # No user value, uncomment the following line to provide one.
5401 # value_source default
5404 # The following properties are affected by this value
5405 # component CYGPKG_REDBOOT_FIS_CONTENTS
5406 # ActiveIf: CYGOPT_REDBOOT_FIS
5407 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5408 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5409 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5410 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5413 # Max number of chunks of free space to manage
5414 # If this option is defined then "fis free" will
5415 # rely on the FIS directory to determine what space is
5416 # free within the FLASH. This option controls the
5417 # maximum number of free segment which can be handled
5418 # (typically this number is small). If this option is
5419 # not enabled, the the archaic behaviour of actually
5420 # scanning the FLASH for erased sectors (unreliable)
5421 # will be used to determine what's free and what's
5424 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5426 # No user value, uncomment the following line to provide one.
5428 # value_source default
5429 # Default value: 1 32
5432 # Flash Image System default directory contents
5434 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5435 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5436 # CYGOPT_REDBOOT_FIS == 1
5439 # Calculated value: 1
5445 # Flash block containing the Directory
5446 # Which block of flash should hold the directory
5447 # information. Positive numbers are absolute block
5448 # numbers. Negative block numbers count backwards
5449 # from the last block. eg 2 means block 2, -2
5450 # means the last but one block.
5452 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5454 # No user value, uncomment the following line to provide one.
5456 # value_source default
5459 # The following properties are affected by this value
5460 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5461 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5462 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5465 # Redundant Flash Image System Directory Support
5466 # This option enables the use of a redundant FIS
5467 # directory within RedBoot. If enabled a flash block
5468 # will be reserved for a second copy of the fis
5469 # directory. Doing this allow for power failure safe
5470 # updates of the directory by the application.
5472 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5474 # No user value, uncomment the following line to provide one.
5476 # value_source default
5478 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5479 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5484 # Flash block containing the backup Directory
5485 # Which block of flash should hold the redundant
5486 # directory information. Positive numbers are
5487 # absolute block numbers. Negative block numbers
5488 # count backwards from the last block. eg 2 means
5489 # block 2, -2 means the last but one block.
5491 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5492 # This option is not active
5493 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5496 # No user value, uncomment the following line to provide one.
5498 # value_source default
5500 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5501 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5502 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5503 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5506 # The following properties are affected by this value
5507 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5508 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5509 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5513 # Pseudo-file to describe reserved area
5514 # If an area of FLASH is reserved, it is informative to
5515 # have a fis entry describing it. This option controls
5516 # creation of such an entry by default in the fis init
5519 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5520 # This option is not active
5521 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5522 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5526 # No user value, uncomment the following line to provide one.
5528 # value_source default
5532 # File to describe RedBoot boot image
5533 # Normally a ROM-startup RedBoot image is first in the
5534 # FLASH, and the system boots using that image. This
5535 # option controls creation of an entry describing it in
5536 # the fis init command. It might be disabled if a
5537 # platform has an immutable boot image of its own, where
5538 # we use a POST-startup RedBoot instead, which performs
5539 # less board initialization.
5541 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5543 # No user value, uncomment the following line to provide one.
5545 # value_source default
5548 # The following properties are affected by this value
5549 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5550 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5551 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5552 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5555 # File to describe RedBoot POST-compatible image
5556 # This option controls creation of an entry describing a
5557 # POST-startup RedBoot image in the fis init command.
5558 # Not all platforms support POST-startup. A platform
5559 # might have both for testing purposes, where the
5560 # eventual user would substitute their own POST code for
5561 # the initial ROM-startup RedBoot, and then jump to the
5562 # POST-compatible RedBoot immediately following.
5564 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5566 # No user value, uncomment the following line to provide one.
5568 # value_source default
5569 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5570 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5575 # Offset of POST image from FLASH start
5576 # This option specifies the offset for a POST image from
5577 # the start of FLASH. If unset, then the fis entry
5578 # describing the POST image will be placed where
5581 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5582 # This option is not active
5583 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5586 # No user value, uncomment the following line to provide one.
5588 # value_source default
5589 # Default value: 0 0
5590 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5591 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5592 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5595 # The following properties are affected by this value
5596 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5597 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5601 # File to describe RedBoot backup image
5602 # This option controls creation of an entry describing a
5603 # backup RedBoot image in the fis init command.
5604 # Conventionally a RAM-startup RedBoot image is kept
5605 # under this name for use in updating the ROM-based
5606 # RedBoot that boots the board.
5608 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5610 # No user value, uncomment the following line to provide one.
5612 # value_source default
5616 # Include ARM SIB ID in FIS
5617 # If set, this option will cause the last 5 words of
5618 # the FIS to include the special ID needed for the
5619 # flash to be recognized as a reserved area for RedBoot
5620 # by an ARM BootRom monitor.
5622 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5624 # No user value, uncomment the following line to provide one.
5626 # value_source default
5630 # Size of FIS directory entry
5631 # The FIS directory is limited to one single flash
5632 # sector. If your flash has tiny sectors, you may wish
5633 # to reduce this value in order to get more slots in
5634 # the FIS directory.
5636 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5638 # No user value, uncomment the following line to provide one.
5640 # value_source default
5641 # Default value: 256
5644 # Number of FIS directory entries
5645 # The FIS directory normally occupies a single flash
5646 # sector. Adjusting this value can allow for more than
5647 # one flash sector to be used, which is useful if your
5648 # sectors are very small.
5650 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5652 # No user value, uncomment the following line to provide one.
5654 # value_source default
5658 # Maximum RedBoot image size
5659 # This option controls the maximum length reserved
5660 # for the RedBoot boot image in the FIS table.
5661 # This should be a multiple of the flash's erase
5664 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5666 # No user value, uncomment the following line to provide one.
5667 # user_value 0x00020000
5668 # The inferred value should not be edited directly.
5669 inferred_value 0x00040000
5670 # value_source inferred
5671 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5672 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5676 # Offset from start of FLASH to RedBoot boot image
5677 # This option controls where the RedBoot boot image is
5678 # located relative to the start of FLASH.
5680 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5682 # No user value, uncomment the following line to provide one.
5684 # value_source default
5685 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5686 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5688 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5689 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5690 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5693 # The following properties are affected by this value
5694 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5695 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5696 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5697 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5698 # component CYGPKG_HAL_ARM_TX53_OPTIONS
5699 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5702 # Size of reserved area at start of FLASH
5703 # This option reserves an area at the start of
5704 # FLASH where RedBoot will never interfere; it is
5705 # expected that this area contains
5706 # (non-RedBoot-based) POST code or some other boot
5707 # monitor that executes before RedBoot.
5709 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5711 # No user value, uncomment the following line to provide one.
5713 # value_source default
5716 # The following properties are affected by this value
5717 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5718 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5719 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5720 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5721 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5722 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5726 # Keep all RedBoot FLASH data blocks locked.
5727 # When this option is enabled, RedBoot will keep configuration
5728 # data and the FIS directory blocks implicitly locked. While
5729 # this is somewhat safer, it does add overhead during updates.
5731 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5732 # This option is not active
5733 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5734 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5738 # No user value, uncomment the following line to provide one.
5740 # value_source default
5744 # Use CRC checksums on FIS images.
5745 # When this option is enabled, RedBoot will use CRC checksums
5746 # when reading and writing flash images.
5748 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5750 # No user value, uncomment the following line to provide one.
5752 # The inferred value should not be edited directly.
5754 # value_source inferred
5758 # ARM FLASH drivers support SIB flash block structure
5759 # This interface is implemented by a flash driver
5760 # to indicate that it supports the ARM SIB flash
5763 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5764 # No options implement this inferface
5765 # ActiveIf constraint: CYGPKG_HAL_ARM
5766 # CYGPKG_HAL_ARM == current
5769 # This value cannot be modified here.
5773 # The following properties are affected by this value
5774 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5775 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5778 # Use ARM SIB flash block structure
5779 # This option is used to interpret ARM Flash System
5780 # information blocks.
5782 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5783 # This option is not active
5784 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5785 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5789 # No user value, uncomment the following line to provide one.
5791 # value_source default
5796 # Keep RedBoot configuration data in FLASH
5797 # When this option is enabled, RedBoot will keep configuration
5798 # data in a separate block of FLASH memory. This data will
5799 # include such items as the node IP address or startup scripts.
5801 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5803 # No user value, uncomment the following line to provide one.
5805 # value_source default
5806 # Default value: CYGPKG_IO_FLASH != 0
5807 # CYGPKG_IO_FLASH == current
5810 # The following properties are affected by this value
5811 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5812 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5813 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5814 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5815 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5816 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5817 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5818 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5819 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5820 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5821 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5822 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5823 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5824 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5828 # Length of configuration data in FLASH
5829 # This option is used to control the amount of memory and FLASH
5830 # to be used for configuration options (persistent storage).
5832 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5834 # No user value, uncomment the following line to provide one.
5836 # value_source default
5837 # Default value: 4096
5840 # Style of media used for persistent data storage
5841 # Persistent data storage can either be held in 'norma' FLASH
5842 # or some other device (represented by the 'EEPROM' choice).
5843 # The different styles utilize different access methods.
5845 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5847 # No user value, uncomment the following line to provide one.
5849 # value_source default
5850 # Default value: FLASH
5851 # Legal values: "FLASH" "EEPROM"
5853 # The following properties are affected by this value
5854 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5855 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5856 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5857 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5860 # Merged config data and FIS directory
5861 # If this option is set, then the FIS directory and FLASH
5862 # configuration database will be stored in the same physical
5865 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5866 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5867 # CYGOPT_REDBOOT_FIS == 1
5868 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5872 # No user value, uncomment the following line to provide one.
5874 # value_source default
5877 # The following properties are affected by this value
5878 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5879 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5882 # Which block of flash to use
5883 # Which block of flash should hold the configuration
5884 # information. Positive numbers are absolute block numbers.
5885 # Negative block numbers count backwards from the last block.
5886 # eg 2 means block 2, -2 means the last but one block.
5888 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5890 # No user value, uncomment the following line to provide one.
5892 # value_source default
5896 # Support simple macros/aliases in FLASH
5897 # This option is used to allow support for simple text-based
5898 # macros (aliases). These aliases are kept in the FLASH
5899 # configuration data (persistent storage).
5901 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5903 # No user value, uncomment the following line to provide one.
5905 # value_source default
5909 # Length of strings in FLASH configuration data
5910 # This option is used to control the amount of memory
5911 # and FLASH to be used for string configuration
5912 # options (persistent storage).
5914 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5916 # No user value, uncomment the following line to provide one.
5918 # value_source default
5919 # Default value: 128
5922 # Length of configuration script(s) in FLASH
5923 # This option is used to control the amount of memory and
5924 # FLASH to be used for configuration options (persistent
5927 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5929 # No user value, uncomment the following line to provide one.
5931 # The inferred value should not be edited directly.
5933 # value_source inferred
5934 # Default value: 512
5937 # Fallback to read-only FLASH configuration
5938 # This option will cause the configuration information to
5939 # revert to the readonly information stored in the FLASH.
5940 # The option only takes effect after
5941 # 1) the config_ok flag has been set to be true,
5942 # indicating that at one time the copy in RAM was valid;
5944 # 2) the information in RAM has been verified to be invalid
5946 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5948 # No user value, uncomment the following line to provide one.
5950 # value_source default
5951 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5952 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5957 # Allow RedBoot to support fileio
5958 # If this option is enabled then RedBoot will provide commands
5959 # to load files from fileio file systems such as JFFS2.
5961 cdl_component CYGPKG_REDBOOT_FILEIO {
5962 # This option is not active
5963 # ActiveIf constraint: CYGPKG_IO_FILEIO
5964 # CYGPKG_IO_FILEIO (unknown) == 0
5968 # No user value, uncomment the following line to provide one.
5970 # value_source default
5973 # The following properties are affected by this value
5974 # option CYGNUM_REDBOOT_GETC_BUFFER
5975 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5979 # Include an ls command
5980 # If this option is enabled a simple ls command will be
5981 # included in redboot so the contents of a directory
5984 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5985 # This option is not active
5986 # The parent CYGPKG_REDBOOT_FILEIO is not active
5989 # No user value, uncomment the following line to provide one.
5991 # value_source default
5996 # Allow RedBoot to support disks
5997 # If this option is enabled then RedBoot will provide commands
5998 # to load disk files.
6000 cdl_component CYGPKG_REDBOOT_DISK {
6008 # Include Redboot commands for disk access
6010 cdl_option CYGSEM_REDBOOT_DISK {
6011 # This option is not active
6012 # The parent CYGPKG_REDBOOT_DISK is disabled
6015 # No user value, uncomment the following line to provide one.
6017 # value_source default
6018 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6019 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6023 # Hardware drivers for disk-type devices
6025 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6026 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6027 # This option is not active
6028 # The parent CYGPKG_REDBOOT_DISK is disabled
6030 # This value cannot be modified here.
6034 # The following properties are affected by this value
6035 # option CYGSEM_REDBOOT_DISK
6036 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6039 # Maximum number of supported disks
6040 # This option controls the number of disks supported by
6043 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6044 # This option is not active
6045 # The parent CYGPKG_REDBOOT_DISK is disabled
6048 # No user value, uncomment the following line to provide one.
6050 # value_source default
6054 # Maximum number of partitions per disk
6055 # This option controls the maximum number of supported
6056 # partitions per disk.
6058 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6059 # This option is not active
6060 # The parent CYGPKG_REDBOOT_DISK is disabled
6063 # No user value, uncomment the following line to provide one.
6065 # value_source default
6069 # Support IDE disks.
6070 # When this option is enabled, RedBoot will support IDE disks.
6072 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6073 # This option is not active
6074 # The parent CYGPKG_REDBOOT_DISK is disabled
6075 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6076 # CYGINT_HAL_PLF_IF_IDE == 0
6080 # No user value, uncomment the following line to provide one.
6082 # value_source default
6087 # Work with VMware virtual disks
6088 # This option controls the disk driver behavior at
6091 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6092 # This option is not active
6093 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6096 # No user value, uncomment the following line to provide one.
6098 # value_source default
6103 # Support Linux second extended filesystems.
6104 # When this option is enabled, RedBoot will support EXT2
6107 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6108 # This option is not active
6109 # The parent CYGPKG_REDBOOT_DISK is disabled
6112 # No user value, uncomment the following line to provide one.
6114 # value_source default
6118 # Support ISO9660 filesystems.
6119 # When this option is enabled, RedBoot will support ISO9660
6122 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6123 # This option is not active
6124 # The parent CYGPKG_REDBOOT_DISK is disabled
6126 # Calculated value: 0
6133 # doc: ref/persistent-state-flash.html
6134 # This contains options related to RedBoot's boot script
6137 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6138 # There is no associated value.
6142 # Boot scripting enabled
6143 # This option controls whether RedBoot boot script
6144 # functionality is enabled.
6146 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6147 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6148 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6149 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6152 # Calculated value: 1
6157 # Use default RedBoot boot script
6158 # If enabled, this option will tell RedBoot to use the
6159 # value of this option as a default boot script.
6161 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6163 # No user value, uncomment the following line to provide one.
6165 # The inferred value should not be edited directly.
6167 # value_source inferred
6168 # Default value: 0 0
6170 # The following properties are affected by this value
6171 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6172 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6175 # Resolution (in ms) for script timeout value.
6176 # This option controls the resolution of the script
6177 # timeout. The value is specified in milliseconds
6178 # (ms), thus to have the script timeout be defined in
6179 # terms of tenths of seconds, use 100.
6181 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6183 # No user value, uncomment the following line to provide one.
6185 # The inferred value should not be edited directly.
6187 # value_source inferred
6188 # Default value: 1000
6191 # Script default timeout value
6192 # This option is used to set the default timeout for startup
6193 # scripts, when they are enabled.
6195 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6197 # No user value, uncomment the following line to provide one.
6199 # The inferred value should not be edited directly.
6201 # value_source inferred
6206 # Support RTC for time & date functions
6207 # When this option is enabled, RedBoot will support commands to
6208 # query and set the real time clock (time and date)
6210 cdl_option CYGSEM_REDBOOT_RTC {
6211 # This option is not active
6212 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6213 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6217 # No user value, uncomment the following line to provide one.
6219 # value_source default
6223 # Behave like a ROM monitor
6224 # Enabling this option will allow RedBoot to provide ROM
6225 # monitor-style services to programs which it executes.
6227 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6228 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6229 # CYG_HAL_STARTUP == ROMRAM
6230 # CYG_HAL_STARTUP == ROMRAM
6233 # Calculated value: 1
6236 # Requires: CYGSEM_HAL_ROM_MONITOR
6237 # CYGSEM_HAL_ROM_MONITOR == 1
6241 # Allow RedBoot to handle GNUPro application 'syscalls'.
6242 # If this option is enabled then RedBoot will install a
6243 # syscall handler to support debugging of applications
6244 # based on GNUPro newlib/bsp.
6246 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6248 # No user value, uncomment the following line to provide one.
6250 # value_source default
6253 # The following properties are affected by this value
6254 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6255 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6256 # option CYGPKG_HAL_GDB_FILEIO
6257 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6261 # Support additional syscalls for 'gprof' profiling
6262 # Support additional syscalls to support a periodic callback
6263 # function for histogram-style profiling, and an enquire/set
6265 # The application must use the GNUPro newlib facilities
6268 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6269 # This option is not active
6270 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6271 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6272 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6276 # No user value, uncomment the following line to provide one.
6278 # value_source default
6282 # Does the HAL support 'gprof' profiling?
6284 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6285 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6286 # This option is not active
6287 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6289 # This value cannot be modified here.
6293 # The following properties are affected by this value
6294 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6295 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6298 # Do not raise SIGTRAP when program exits
6299 # For some (single shot) newlib based programs,
6300 # exiting and returning a termination status may be
6301 # the normal expected behavior.
6303 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6304 # This option is not active
6305 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6308 # No user value, uncomment the following line to provide one.
6310 # value_source default
6315 # Use a common buffer for Zlib and FIS
6316 # Use a common memory buffer for both the zlib workspace
6317 # and FIS directory operations. This can save a substantial
6318 # amount of RAM, especially when flash sectors are large.
6320 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6321 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6322 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6323 # CYGOPT_REDBOOT_FIS == 1
6327 # No user value, uncomment the following line to provide one.
6329 # value_source default
6334 # Size of Zlib/FIS common buffer
6335 # Size of common buffer to allocate. Must be at least the
6336 # size of one flash sector.
6338 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6339 # This option is not active
6340 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6343 # No user value, uncomment the following line to provide one.
6344 # user_value 0x0000C000
6345 # value_source default
6346 # Default value: 0x0000C000
6347 # Legal values: 0x4000 to 0x80000000
6351 # Buffer size in getc when loading images
6352 # When loading images a buffer is used between redboot and the
6353 # underlying storage medium, eg a filesystem, or a socket etc.
6354 # The size of this buffer can have a big impart on load speed.
6356 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6358 # No user value, uncomment the following line to provide one.
6360 # value_source default
6361 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6362 # CYGPKG_REDBOOT_FILEIO == 0
6367 # Redboot for ARM options
6368 # This option lists the target's requirements for a valid Redboot
6371 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6372 # ActiveIf constraint: CYGPKG_REDBOOT
6373 # CYGPKG_REDBOOT == current
6376 # There is no associated value.
6378 # The following properties are affected by this value
6382 # Provide the exec command in RedBoot
6383 # This option contains requirements for booting linux
6384 # from RedBoot. The component is enabled/disabled from
6387 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6388 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6389 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6392 # There is no associated value.
6396 # Enable -x switch for exec command.
6397 # This option allows bi-endian platforms to launch kernels
6398 # built for an endianess different than the RedBoot endianess
6400 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6402 # No user value, uncomment the following line to provide one.
6404 # value_source default
6408 # Physical base address of linux kernel
6409 # This is the physical address of the base of the
6410 # Linux kernel image.
6412 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6414 # No user value, uncomment the following line to provide one.
6415 # user_value 0x70108000
6416 # value_source default
6417 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6418 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6422 # Default physical base address of linux kernel
6423 # This is the physical address of the base of the
6424 # Linux kernel image. This option gets set by the
6427 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6429 # No user value, uncomment the following line to provide one.
6430 # user_value 0x00008000
6431 # The inferred value should not be edited directly.
6432 inferred_value 0x70108000
6433 # value_source inferred
6434 # Default value: 0x00008000
6436 # The following properties are affected by this value
6437 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6438 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6439 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
6440 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6443 # Base address of linux kernel parameter tags
6444 # This is the base address of the area of memory used to
6445 # pass parameters to the Linux kernel. This should be chosen
6446 # to avoid overlap with the kernel and any ramdisk image.
6448 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6450 # No user value, uncomment the following line to provide one.
6451 # user_value 0x00000100
6452 # value_source default
6453 # Default value: 0x00000100
6458 # Redboot HAL options
6459 # This option lists the target's requirements for a valid Redboot
6462 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6463 # ActiveIf constraint: CYGPKG_REDBOOT
6464 # CYGPKG_REDBOOT == current
6467 # There is no associated value.
6471 # Build Redboot ROM binary image
6472 # This option enables the conversion of the Redboot ELF
6473 # image to a binary image suitable for ROM programming.
6475 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6476 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6477 # CYGBLD_BUILD_REDBOOT == 1
6481 # No user value, uncomment the following line to provide one.
6483 # value_source default
6488 # Redboot HAL variant options
6490 cdl_component CYGPKG_REDBOOT_HAL_TX53_OPTIONS {
6491 # ActiveIf constraint: CYGPKG_REDBOOT
6492 # CYGPKG_REDBOOT == current
6495 # There is no associated value.
6496 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6497 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6502 # ISO C and POSIX infrastructure
6503 # eCos supports implementations of ISO C libraries and POSIX
6504 # implementations. This package provides infrastructure used by
6505 # all such implementations.
6507 cdl_package CYGPKG_ISOINFRA {
6508 # Packages cannot be added or removed, nor can their version be changed,
6509 # simply by editing their value. Instead the appropriate configuration
6510 # should be used to perform these actions.
6512 # This value cannot be modified here.
6514 # Current value: 1 current
6516 # The following properties are affected by this value
6517 # component CYGBLD_BUILD_REDBOOT
6518 # Requires: CYGPKG_ISOINFRA
6519 # package CYGPKG_LIBC_STRING
6520 # Requires: CYGPKG_ISOINFRA
6521 # package CYGPKG_COMPRESS_ZLIB
6522 # Requires: CYGPKG_ISOINFRA
6523 # package CYGPKG_IO_FLASH
6524 # Requires: CYGPKG_ISOINFRA
6525 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6526 # Requires: CYGPKG_ISOINFRA
6527 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6528 # DefaultValue: 0 != CYGPKG_ISOINFRA
6529 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6530 # ActiveIf: CYGPKG_ISOINFRA
6531 # package CYGPKG_LIBC_I18N
6532 # Requires: CYGPKG_ISOINFRA
6533 # package CYGPKG_LIBC_STDLIB
6534 # Requires: CYGPKG_ISOINFRA
6538 # Startup and termination
6540 cdl_component CYGPKG_ISO_STARTUP {
6541 # There is no associated value.
6545 # main() startup implementations
6546 # Implementations of this interface arrange for a user-supplied
6547 # main() to be called in an ISO compatible environment.
6549 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6550 # No options implement this inferface
6551 # This value cannot be modified here.
6554 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6555 # CYGINT_ISO_MAIN_STARTUP == 0
6558 # The following properties are affected by this value
6559 # interface CYGINT_ISO_MAIN_STARTUP
6560 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6563 # environ implementations
6564 # Implementations of this interface provide the environ
6565 # variable required by POSIX.
6567 cdl_interface CYGINT_ISO_ENVIRON {
6568 # No options implement this inferface
6569 # This value cannot be modified here.
6572 # Requires: 1 >= CYGINT_ISO_ENVIRON
6573 # CYGINT_ISO_ENVIRON == 0
6576 # The following properties are affected by this value
6577 # interface CYGINT_ISO_ENVIRON
6578 # Requires: 1 >= CYGINT_ISO_ENVIRON
6584 cdl_component CYGPKG_ISO_CTYPE_H {
6585 # There is no associated value.
6589 # Number of implementations of ctype functions
6591 cdl_interface CYGINT_ISO_CTYPE {
6592 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6593 # This value cannot be modified here.
6596 # Requires: 1 >= CYGINT_ISO_CTYPE
6597 # CYGINT_ISO_CTYPE == 1
6600 # The following properties are affected by this value
6601 # interface CYGINT_ISO_CTYPE
6602 # Requires: 1 >= CYGINT_ISO_CTYPE
6603 # package CYGPKG_HAL_ARM_TX53KARO
6604 # Requires: CYGINT_ISO_CTYPE
6605 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6606 # Requires: CYGINT_ISO_CTYPE
6607 # package CYGPKG_LIBC_STDLIB
6608 # Requires: CYGINT_ISO_CTYPE
6611 # Ctype implementation header
6613 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6615 # No user value, uncomment the following line to provide one.
6617 # The inferred value should not be edited directly.
6618 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6619 # value_source inferred
6620 # Default value: 0 0
6622 # The following properties are affected by this value
6623 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6624 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6625 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6626 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6632 cdl_component CYGPKG_ISO_ERRNO {
6633 # There is no associated value.
6637 # Number of implementations of error codes
6639 cdl_interface CYGINT_ISO_ERRNO_CODES {
6640 # Implemented by CYGPKG_ERROR, active, enabled
6641 # This value cannot be modified here.
6644 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6645 # CYGINT_ISO_ERRNO_CODES == 1
6648 # The following properties are affected by this value
6649 # interface CYGINT_ISO_ERRNO_CODES
6650 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6653 # Error codes implementation header
6655 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6657 # No user value, uncomment the following line to provide one.
6659 # The inferred value should not be edited directly.
6660 inferred_value 1 <cyg/error/codes.h>
6661 # value_source inferred
6662 # Default value: 0 0
6664 # The following properties are affected by this value
6665 # package CYGPKG_ERROR
6666 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6669 # Number of implementations of errno variable
6671 cdl_interface CYGINT_ISO_ERRNO {
6672 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6673 # This value cannot be modified here.
6676 # Requires: 1 >= CYGINT_ISO_ERRNO
6677 # CYGINT_ISO_ERRNO == 1
6680 # The following properties are affected by this value
6681 # interface CYGINT_ISO_ERRNO
6682 # Requires: 1 >= CYGINT_ISO_ERRNO
6685 # errno variable implementation header
6687 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6689 # No user value, uncomment the following line to provide one.
6691 # The inferred value should not be edited directly.
6692 inferred_value 1 <cyg/error/errno.h>
6693 # value_source inferred
6694 # Default value: 0 0
6696 # The following properties are affected by this value
6697 # component CYGPKG_ERROR_ERRNO
6698 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6702 # Locale-related functions
6704 cdl_component CYGPKG_ISO_LOCALE {
6705 # There is no associated value.
6709 # Number of implementations of locale functions
6711 cdl_interface CYGINT_ISO_LOCALE {
6712 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6713 # This value cannot be modified here.
6716 # Requires: 1 >= CYGINT_ISO_LOCALE
6717 # CYGINT_ISO_LOCALE == 1
6720 # The following properties are affected by this value
6721 # interface CYGINT_ISO_LOCALE
6722 # Requires: 1 >= CYGINT_ISO_LOCALE
6725 # Locale implementation header
6727 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6729 # No user value, uncomment the following line to provide one.
6731 # value_source default
6732 # Default value: 0 0
6736 # Standard I/O-related functionality
6738 cdl_component CYGPKG_ISO_STDIO {
6739 # There is no associated value.
6743 # Number of implementations of stdio file types
6745 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6746 # No options implement this inferface
6747 # This value cannot be modified here.
6749 # Current value: 0 0
6750 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6751 # CYGINT_ISO_STDIO_FILETYPES == 0
6754 # The following properties are affected by this value
6755 # interface CYGINT_ISO_STDIO_FILETYPES
6756 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6759 # Stdio file types implementation header
6761 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6763 # No user value, uncomment the following line to provide one.
6765 # value_source default
6766 # Default value: 0 0
6769 # Stdio standard streams implementations
6771 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6772 # No options implement this inferface
6773 # This value cannot be modified here.
6775 # Current value: 0 0
6776 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6777 # CYGINT_ISO_STDIO_STREAMS == 0
6780 # The following properties are affected by this value
6781 # interface CYGINT_ISO_STDIO_STREAMS
6782 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6785 # Stdio standard streams implementation header
6786 # This header file must define stdin, stdout
6789 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6791 # No user value, uncomment the following line to provide one.
6793 # value_source default
6794 # Default value: 0 0
6797 # Number of implementations of stdio file operations
6799 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6800 # No options implement this inferface
6801 # This value cannot be modified here.
6803 # Current value: 0 0
6804 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6805 # CYGINT_ISO_STDIO_FILEOPS == 0
6808 # The following properties are affected by this value
6809 # interface CYGINT_ISO_STDIO_FILEOPS
6810 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6813 # Stdio file operations implementation header
6814 # This header controls the file system operations on a file
6815 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6818 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6820 # No user value, uncomment the following line to provide one.
6822 # value_source default
6823 # Default value: 0 0
6826 # Number of implementations of stdio file access functionals
6828 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6829 # No options implement this inferface
6830 # This value cannot be modified here.
6832 # Current value: 0 0
6833 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6834 # CYGINT_ISO_STDIO_FILEACCESS == 0
6837 # The following properties are affected by this value
6838 # interface CYGINT_ISO_STDIO_FILEACCESS
6839 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6840 # option CYGFUN_COMPRESS_ZLIB_GZIO
6841 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6844 # Stdio file access implementation header
6845 # This header controls the file access operations
6846 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6847 # setvbuf(), and associated constants.
6849 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6851 # No user value, uncomment the following line to provide one.
6853 # value_source default
6854 # Default value: 0 0
6857 # Number of implementations of stdio formatted I/O
6859 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6860 # No options implement this inferface
6861 # This value cannot be modified here.
6863 # Current value: 0 0
6864 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6865 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6868 # The following properties are affected by this value
6869 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6870 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6871 # option CYGFUN_COMPRESS_ZLIB_GZIO
6872 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6875 # Stdio formatted I/O implementation header
6877 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6879 # No user value, uncomment the following line to provide one.
6881 # value_source default
6882 # Default value: 0 0
6885 # Number of implementations of stdio character I/O
6887 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6888 # No options implement this inferface
6889 # This value cannot be modified here.
6891 # Current value: 0 0
6892 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6893 # CYGINT_ISO_STDIO_CHAR_IO == 0
6896 # The following properties are affected by this value
6897 # interface CYGINT_ISO_STDIO_CHAR_IO
6898 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6901 # Stdio character I/O implementation header
6903 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6905 # No user value, uncomment the following line to provide one.
6907 # value_source default
6908 # Default value: 0 0
6911 # Number of implementations of stdio direct I/O
6913 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6914 # No options implement this inferface
6915 # This value cannot be modified here.
6917 # Current value: 0 0
6918 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6919 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6922 # The following properties are affected by this value
6923 # interface CYGINT_ISO_STDIO_DIRECT_IO
6924 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6927 # Stdio direct I/O implementation header
6929 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6931 # No user value, uncomment the following line to provide one.
6933 # value_source default
6934 # Default value: 0 0
6937 # Number of implementations of stdio file positioning
6939 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6940 # No options implement this inferface
6941 # This value cannot be modified here.
6943 # Current value: 0 0
6944 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6945 # CYGINT_ISO_STDIO_FILEPOS == 0
6948 # The following properties are affected by this value
6949 # interface CYGINT_ISO_STDIO_FILEPOS
6950 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6951 # option CYGFUN_COMPRESS_ZLIB_GZIO
6952 # Requires: CYGINT_ISO_STDIO_FILEPOS
6955 # Stdio file positioning implementation header
6957 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6959 # No user value, uncomment the following line to provide one.
6961 # value_source default
6962 # Default value: 0 0
6965 # Number of implementations of stdio error handling
6967 cdl_interface CYGINT_ISO_STDIO_ERROR {
6968 # No options implement this inferface
6969 # This value cannot be modified here.
6971 # Current value: 0 0
6972 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6973 # CYGINT_ISO_STDIO_ERROR == 0
6976 # The following properties are affected by this value
6977 # interface CYGINT_ISO_STDIO_ERROR
6978 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6981 # Stdio error handling implementation header
6983 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6985 # No user value, uncomment the following line to provide one.
6987 # value_source default
6988 # Default value: 0 0
6991 # POSIX fd-related function implementations
6993 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6994 # No options implement this inferface
6995 # This value cannot be modified here.
6997 # Current value: 0 0
6998 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6999 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7002 # The following properties are affected by this value
7003 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7004 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7007 # POSIX fd-related function implementation header
7009 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7011 # No user value, uncomment the following line to provide one.
7013 # value_source default
7014 # Default value: 0 0
7018 # Standard general utility functions
7020 cdl_component CYGPKG_ISO_STDLIB {
7021 # There is no associated value.
7025 # String conversion function implementations
7027 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7028 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7029 # This value cannot be modified here.
7032 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7033 # CYGINT_ISO_STDLIB_STRCONV == 1
7036 # The following properties are affected by this value
7037 # interface CYGINT_ISO_STDLIB_STRCONV
7038 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7041 # String conversion function implementation header
7043 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7045 # No user value, uncomment the following line to provide one.
7047 # The inferred value should not be edited directly.
7048 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7049 # value_source inferred
7050 # Default value: 0 0
7052 # The following properties are affected by this value
7053 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7054 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7057 # String to FP conversion function implementations
7059 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7060 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7061 # This value cannot be modified here.
7064 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7065 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7068 # The following properties are affected by this value
7069 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7070 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7073 # String to FP conversion function implementation header
7075 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7077 # No user value, uncomment the following line to provide one.
7079 # value_source default
7080 # Default value: 0 0
7083 # Random number generator implementations
7085 cdl_interface CYGINT_ISO_RAND {
7086 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7087 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7088 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7089 # This value cannot be modified here.
7092 # Requires: 1 >= CYGINT_ISO_RAND
7093 # CYGINT_ISO_RAND == 1
7096 # The following properties are affected by this value
7097 # interface CYGINT_ISO_RAND
7098 # Requires: 1 >= CYGINT_ISO_RAND
7101 # Random number generator implementation header
7103 cdl_option CYGBLD_ISO_RAND_HEADER {
7105 # No user value, uncomment the following line to provide one.
7107 # value_source default
7108 # Default value: 0 0
7111 # Malloc implementations
7113 cdl_interface CYGINT_ISO_MALLOC {
7114 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7115 # This value cannot be modified here.
7118 # Requires: 1 >= CYGINT_ISO_MALLOC
7119 # CYGINT_ISO_MALLOC == 1
7122 # The following properties are affected by this value
7123 # interface CYGINT_ISO_MALLOC
7124 # Requires: 1 >= CYGINT_ISO_MALLOC
7125 # option CYGFUN_LIBC_STRING_STRDUP
7126 # ActiveIf: CYGINT_ISO_MALLOC
7129 # Malloc implementation header
7131 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7133 # No user value, uncomment the following line to provide one.
7135 # value_source default
7136 # Default value: 0 0
7139 # Mallinfo() implementations
7141 cdl_interface CYGINT_ISO_MALLINFO {
7142 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7143 # This value cannot be modified here.
7146 # Requires: 1 >= CYGINT_ISO_MALLINFO
7147 # CYGINT_ISO_MALLINFO == 1
7150 # The following properties are affected by this value
7151 # interface CYGINT_ISO_MALLINFO
7152 # Requires: 1 >= CYGINT_ISO_MALLINFO
7155 # Mallinfo() implementation header
7157 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7159 # No user value, uncomment the following line to provide one.
7161 # value_source default
7162 # Default value: 0 0
7165 # Program exit functionality implementations
7167 cdl_interface CYGINT_ISO_EXIT {
7168 # No options implement this inferface
7169 # This value cannot be modified here.
7172 # Requires: 1 >= CYGINT_ISO_EXIT
7173 # CYGINT_ISO_EXIT == 0
7176 # The following properties are affected by this value
7177 # interface CYGINT_ISO_EXIT
7178 # Requires: 1 >= CYGINT_ISO_EXIT
7179 # option CYGFUN_INFRA_DUMMY_ABORT
7180 # Requires: !CYGINT_ISO_EXIT
7181 # option CYGFUN_INFRA_DUMMY_ABORT
7182 # DefaultValue: CYGINT_ISO_EXIT == 0
7185 # Program exit functionality implementation header
7187 cdl_option CYGBLD_ISO_EXIT_HEADER {
7189 # No user value, uncomment the following line to provide one.
7191 # value_source default
7192 # Default value: 0 0
7195 # Program environment implementations
7197 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7198 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7199 # This value cannot be modified here.
7202 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7203 # CYGINT_ISO_STDLIB_ENVIRON == 1
7206 # The following properties are affected by this value
7207 # interface CYGINT_ISO_STDLIB_ENVIRON
7208 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7211 # Program environment implementation header
7213 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7215 # No user value, uncomment the following line to provide one.
7217 # value_source default
7218 # Default value: 0 0
7221 # system() implementations
7223 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7224 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7225 # This value cannot be modified here.
7228 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7229 # CYGINT_ISO_STDLIB_SYSTEM == 1
7232 # The following properties are affected by this value
7233 # interface CYGINT_ISO_STDLIB_SYSTEM
7234 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7237 # system() implementation header
7239 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7241 # No user value, uncomment the following line to provide one.
7243 # value_source default
7244 # Default value: 0 0
7247 # bsearch() implementations
7249 cdl_interface CYGINT_ISO_BSEARCH {
7250 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7251 # This value cannot be modified here.
7254 # Requires: 1 >= CYGINT_ISO_BSEARCH
7255 # CYGINT_ISO_BSEARCH == 1
7258 # The following properties are affected by this value
7259 # interface CYGINT_ISO_BSEARCH
7260 # Requires: 1 >= CYGINT_ISO_BSEARCH
7263 # bsearch() implementation header
7265 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7267 # No user value, uncomment the following line to provide one.
7269 # value_source default
7270 # Default value: 0 0
7273 # qsort() implementations
7275 cdl_interface CYGINT_ISO_QSORT {
7276 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7277 # This value cannot be modified here.
7280 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7281 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7284 # The following properties are affected by this value
7287 # qsort() implementation header
7289 cdl_option CYGBLD_ISO_QSORT_HEADER {
7291 # No user value, uncomment the following line to provide one.
7293 # value_source default
7294 # Default value: 0 0
7297 # abs()/labs() implementations
7299 cdl_interface CYGINT_ISO_ABS {
7300 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7301 # This value cannot be modified here.
7304 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7305 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7308 # The following properties are affected by this value
7311 # abs()/labs() implementation header
7313 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7315 # No user value, uncomment the following line to provide one.
7317 # The inferred value should not be edited directly.
7318 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7319 # value_source inferred
7320 # Default value: 0 0
7322 # The following properties are affected by this value
7323 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7324 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7327 # div()/ldiv() implementations
7329 cdl_interface CYGINT_ISO_DIV {
7330 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7331 # This value cannot be modified here.
7334 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7335 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7338 # The following properties are affected by this value
7341 # div()/ldiv() implementation header
7343 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7345 # No user value, uncomment the following line to provide one.
7347 # The inferred value should not be edited directly.
7348 inferred_value 1 <cyg/libc/stdlib/div.inl>
7349 # value_source inferred
7350 # Default value: 0 0
7352 # The following properties are affected by this value
7353 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7354 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7357 # Header defining the implementation's MB_CUR_MAX
7359 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7361 # No user value, uncomment the following line to provide one.
7363 # value_source default
7364 # Default value: 0 0
7366 # The following properties are affected by this value
7367 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7368 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7371 # Multibyte character implementations
7373 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7374 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7375 # This value cannot be modified here.
7378 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7379 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7382 # The following properties are affected by this value
7383 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7384 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7387 # Multibyte character implementation header
7389 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7391 # No user value, uncomment the following line to provide one.
7393 # value_source default
7394 # Default value: 0 0
7400 cdl_component CYGPKG_ISO_STRING {
7401 # There is no associated value.
7405 # Number of implementations of strerror() function
7407 cdl_interface CYGINT_ISO_STRERROR {
7408 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7409 # This value cannot be modified here.
7411 # Current value: 1 1
7412 # Requires: 1 >= CYGINT_ISO_STRERROR
7413 # CYGINT_ISO_STRERROR == 1
7416 # The following properties are affected by this value
7417 # interface CYGINT_ISO_STRERROR
7418 # Requires: 1 >= CYGINT_ISO_STRERROR
7421 # strerror() implementation header
7423 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7425 # No user value, uncomment the following line to provide one.
7427 # The inferred value should not be edited directly.
7428 inferred_value 1 <cyg/error/strerror.h>
7429 # value_source inferred
7430 # Default value: 0 0
7432 # The following properties are affected by this value
7433 # option CYGPKG_ERROR_STRERROR
7434 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7437 # memcpy() implementation header
7439 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7441 # No user value, uncomment the following line to provide one.
7443 # value_source default
7444 # Default value: 0 0
7447 # memset() implementation header
7449 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7451 # No user value, uncomment the following line to provide one.
7453 # value_source default
7454 # Default value: 0 0
7457 # Number of implementations of strtok_r() function
7459 cdl_interface CYGINT_ISO_STRTOK_R {
7460 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7461 # This value cannot be modified here.
7463 # Current value: 1 1
7464 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7465 # CYGINT_ISO_STRTOK_R == 1
7468 # The following properties are affected by this value
7469 # interface CYGINT_ISO_STRTOK_R
7470 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7473 # strtok_r() implementation header
7475 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7477 # No user value, uncomment the following line to provide one.
7479 # The inferred value should not be edited directly.
7480 inferred_value 1 <cyg/libc/string/string.h>
7481 # value_source inferred
7482 # Default value: 0 0
7484 # The following properties are affected by this value
7485 # package CYGPKG_LIBC_STRING
7486 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7489 # Number of implementations of locale-specific string functions
7490 # This covers locale-dependent string functions such as strcoll()
7493 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7494 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7495 # This value cannot be modified here.
7497 # Current value: 1 1
7498 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7499 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7502 # The following properties are affected by this value
7503 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7504 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7507 # Locale-specific string functions' implementation header
7508 # This covers locale-dependent string functions such as strcoll()
7511 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7513 # No user value, uncomment the following line to provide one.
7515 # The inferred value should not be edited directly.
7516 inferred_value 1 <cyg/libc/string/string.h>
7517 # value_source inferred
7518 # Default value: 0 0
7520 # The following properties are affected by this value
7521 # package CYGPKG_LIBC_STRING
7522 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7525 # Number of implementations of BSD string functions
7527 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7528 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7529 # This value cannot be modified here.
7531 # Current value: 0 0
7532 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7533 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7536 # The following properties are affected by this value
7537 # interface CYGINT_ISO_STRING_BSD_FUNCS
7538 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7541 # BSD string functions' implementation header
7543 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7545 # No user value, uncomment the following line to provide one.
7547 # The inferred value should not be edited directly.
7548 inferred_value 1 <cyg/libc/string/bsdstring.h>
7549 # value_source inferred
7550 # Default value: 0 0
7552 # The following properties are affected by this value
7553 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7554 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7557 # Number of implementations of other mem*() functions
7559 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7560 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7561 # This value cannot be modified here.
7563 # Current value: 1 1
7564 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7565 # CYGINT_ISO_STRING_MEMFUNCS == 1
7568 # The following properties are affected by this value
7569 # interface CYGINT_ISO_STRING_MEMFUNCS
7570 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7571 # component CYGBLD_BUILD_REDBOOT
7572 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7573 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7574 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7577 # Other mem*() functions' implementation header
7579 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7581 # No user value, uncomment the following line to provide one.
7583 # The inferred value should not be edited directly.
7584 inferred_value 1 <cyg/libc/string/string.h>
7585 # value_source inferred
7586 # Default value: 0 0
7588 # The following properties are affected by this value
7589 # package CYGPKG_LIBC_STRING
7590 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7593 # Number of implementations of other ISO C str*() functions
7594 # This covers the other str*() functions defined by ISO C.
7596 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7597 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7598 # This value cannot be modified here.
7600 # Current value: 1 1
7601 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7602 # CYGINT_ISO_STRING_STRFUNCS == 1
7605 # The following properties are affected by this value
7606 # interface CYGINT_ISO_STRING_STRFUNCS
7607 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7608 # option CYGFUN_INFRA_DUMMY_STRLEN
7609 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7610 # option CYGFUN_INFRA_DUMMY_STRLEN
7611 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7612 # component CYGBLD_BUILD_REDBOOT
7613 # Requires: CYGINT_ISO_STRING_STRFUNCS
7614 # component CYGPKG_IO_ETH_DRIVERS_NET
7615 # Requires: CYGINT_ISO_STRING_STRFUNCS
7616 # option CYGFUN_COMPRESS_ZLIB_GZIO
7617 # Requires: CYGINT_ISO_STRING_STRFUNCS
7618 # package CYGPKG_IO_FLASH
7619 # Requires: CYGINT_ISO_STRING_STRFUNCS
7620 # package CYGPKG_LIBC_STDLIB
7621 # Requires: CYGINT_ISO_STRING_STRFUNCS
7624 # Other ISO C str*() functions' implementation header
7625 # This covers the other str*() functions defined by ISO C.
7627 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7629 # No user value, uncomment the following line to provide one.
7631 # The inferred value should not be edited directly.
7632 inferred_value 1 <cyg/libc/string/string.h>
7633 # value_source inferred
7634 # Default value: 0 0
7636 # The following properties are affected by this value
7637 # package CYGPKG_LIBC_STRING
7638 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7642 # Clock and time functionality
7644 cdl_component CYGPKG_ISO_TIME {
7645 # There is no associated value.
7649 # time_t implementation header
7651 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7653 # No user value, uncomment the following line to provide one.
7655 # value_source default
7656 # Default value: 0 0
7659 # clock_t implementation header
7661 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7663 # No user value, uncomment the following line to provide one.
7665 # value_source default
7666 # Default value: 0 0
7669 # struct timeval implementation header
7671 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7673 # No user value, uncomment the following line to provide one.
7675 # value_source default
7676 # Default value: 0 0
7679 # fnmatch implementation header
7681 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7683 # No user value, uncomment the following line to provide one.
7685 # value_source default
7686 # Default value: 0 0
7689 # Number of implementations of POSIX timer types
7691 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7692 # No options implement this inferface
7693 # This value cannot be modified here.
7695 # Current value: 0 0
7696 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7697 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7700 # The following properties are affected by this value
7701 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7702 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7705 # POSIX timer types implementation header
7707 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7709 # No user value, uncomment the following line to provide one.
7711 # value_source default
7712 # Default value: 0 0
7715 # Number of implementations of POSIX clock types
7717 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7718 # No options implement this inferface
7719 # This value cannot be modified here.
7721 # Current value: 0 0
7722 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7723 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7726 # The following properties are affected by this value
7727 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7728 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7731 # POSIX clock types implementation header
7733 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7735 # No user value, uncomment the following line to provide one.
7737 # value_source default
7738 # Default value: 0 0
7741 # Number of implementations of ISO C types
7743 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7744 # No options implement this inferface
7745 # This value cannot be modified here.
7747 # Current value: 0 0
7748 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7749 # CYGINT_ISO_C_TIME_TYPES == 0
7752 # The following properties are affected by this value
7753 # interface CYGINT_ISO_C_TIME_TYPES
7754 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7757 # ISO C time types implementation header
7759 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7761 # No user value, uncomment the following line to provide one.
7763 # value_source default
7764 # Default value: 0 0
7767 # Number of implementations of POSIX timers
7769 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7770 # No options implement this inferface
7771 # This value cannot be modified here.
7773 # Current value: 0 0
7774 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7775 # CYGINT_ISO_POSIX_TIMERS == 0
7778 # The following properties are affected by this value
7779 # interface CYGINT_ISO_POSIX_TIMERS
7780 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7783 # POSIX timer implementation header
7785 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7787 # No user value, uncomment the following line to provide one.
7789 # value_source default
7790 # Default value: 0 0
7793 # Number of implementations of POSIX clocks
7795 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7796 # No options implement this inferface
7797 # This value cannot be modified here.
7799 # Current value: 0 0
7800 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7801 # CYGINT_ISO_POSIX_CLOCKS == 0
7804 # The following properties are affected by this value
7805 # interface CYGINT_ISO_POSIX_CLOCKS
7806 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7809 # POSIX clocks implementation header
7811 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7813 # No user value, uncomment the following line to provide one.
7815 # value_source default
7816 # Default value: 0 0
7819 # Number of implementations of ISO C clock functions
7821 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7822 # No options implement this inferface
7823 # This value cannot be modified here.
7825 # Current value: 0 0
7826 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7827 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7830 # The following properties are affected by this value
7831 # interface CYGINT_ISO_C_CLOCK_FUNCS
7832 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7835 # ISO C clock functions' implementation header
7837 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7839 # No user value, uncomment the following line to provide one.
7841 # value_source default
7842 # Default value: 0 0
7845 # Number of implementations of tzset() function
7847 cdl_interface CYGINT_ISO_TZSET {
7848 # No options implement this inferface
7849 # This value cannot be modified here.
7851 # Current value: 0 0
7852 # Requires: 1 >= CYGINT_ISO_TZSET
7853 # CYGINT_ISO_TZSET == 0
7856 # The following properties are affected by this value
7857 # interface CYGINT_ISO_TZSET
7858 # Requires: 1 >= CYGINT_ISO_TZSET
7861 # tzset() implementation header
7863 cdl_option CYGBLD_ISO_TZSET_HEADER {
7865 # No user value, uncomment the following line to provide one.
7867 # value_source default
7868 # Default value: 0 0
7872 # Signal functionality
7874 cdl_component CYGPKG_ISO_SIGNAL {
7875 # There is no associated value.
7879 # Number of implementations of signal numbers
7881 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7882 # No options implement this inferface
7883 # This value cannot be modified here.
7886 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7887 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7890 # The following properties are affected by this value
7891 # interface CYGINT_ISO_SIGNAL_NUMBERS
7892 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7895 # Signal numbering implementation header
7896 # This header provides the mapping of signal
7897 # names (e.g. SIGBUS) to numbers.
7899 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7901 # No user value, uncomment the following line to provide one.
7903 # value_source default
7904 # Default value: 0 0
7907 # Number of signal implementations
7909 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7910 # No options implement this inferface
7911 # This value cannot be modified here.
7914 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7915 # CYGINT_ISO_SIGNAL_IMPL == 0
7918 # The following properties are affected by this value
7919 # interface CYGINT_ISO_SIGNAL_IMPL
7920 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7923 # Signals implementation header
7925 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7927 # No user value, uncomment the following line to provide one.
7929 # value_source default
7930 # Default value: 0 0
7933 # POSIX real time signals feature test macro
7934 # This defines the POSIX feature test macro
7935 # that indicates that the POSIX real time signals
7938 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7939 # No options implement this inferface
7940 # This value cannot be modified here.
7943 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7944 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7947 # The following properties are affected by this value
7948 # interface CYGINT_POSIX_REALTIME_SIGNALS
7949 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7953 # Non-local jumps functionality
7955 cdl_component CYGPKG_ISO_SETJMP {
7956 # There is no associated value.
7960 # setjmp() / longjmp() implementations
7962 cdl_interface CYGINT_ISO_SETJMP {
7963 # No options implement this inferface
7964 # This value cannot be modified here.
7967 # Requires: 1 >= CYGINT_ISO_SETJMP
7968 # CYGINT_ISO_SETJMP == 0
7971 # The following properties are affected by this value
7972 # interface CYGINT_ISO_SETJMP
7973 # Requires: 1 >= CYGINT_ISO_SETJMP
7976 # setjmp() / longjmp() implementation header
7978 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7980 # No user value, uncomment the following line to provide one.
7982 # value_source default
7983 # Default value: 0 0
7986 # sigsetjmp() / siglongjmp() implementations
7988 cdl_interface CYGINT_ISO_SIGSETJMP {
7989 # No options implement this inferface
7990 # This value cannot be modified here.
7993 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7994 # CYGINT_ISO_SIGSETJMP == 0
7997 # The following properties are affected by this value
7998 # interface CYGINT_ISO_SIGSETJMP
7999 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8002 # sigsetjmp() / siglongjmp() implementation header
8004 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8006 # No user value, uncomment the following line to provide one.
8008 # value_source default
8009 # Default value: 0 0
8013 # Assertions implementation header
8015 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8017 # No user value, uncomment the following line to provide one.
8019 # value_source default
8020 # Default value: 0 0
8023 # POSIX file control
8024 # This covers the POSIX file control definitions,
8025 # normally found in <fcntl.h>
8027 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8028 # There is no associated value.
8032 # POSIX open flags implementation header
8034 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8036 # No user value, uncomment the following line to provide one.
8038 # value_source default
8039 # Default value: 0 0
8042 # POSIX fcntl() implementations
8044 cdl_interface CYGINT_ISO_FCNTL {
8045 # No options implement this inferface
8046 # This value cannot be modified here.
8049 # Requires: 1 >= CYGINT_ISO_FCNTL
8050 # CYGINT_ISO_FCNTL == 0
8053 # The following properties are affected by this value
8054 # interface CYGINT_ISO_FCNTL
8055 # Requires: 1 >= CYGINT_ISO_FCNTL
8058 # POSIX fcntl() implementation header
8060 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8062 # No user value, uncomment the following line to provide one.
8064 # value_source default
8065 # Default value: 0 0
8068 # POSIX file open implementations
8070 cdl_interface CYGINT_ISO_OPEN {
8071 # No options implement this inferface
8072 # This value cannot be modified here.
8075 # Requires: 1 >= CYGINT_ISO_OPEN
8076 # CYGINT_ISO_OPEN == 0
8079 # The following properties are affected by this value
8080 # interface CYGINT_ISO_OPEN
8081 # Requires: 1 >= CYGINT_ISO_OPEN
8084 # POSIX file open implementation header
8086 cdl_option CYGBLD_ISO_OPEN_HEADER {
8088 # No user value, uncomment the following line to provide one.
8090 # value_source default
8091 # Default value: 0 0
8095 # <sys/stat.h> definitions implementation header
8097 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8099 # No user value, uncomment the following line to provide one.
8101 # value_source default
8102 # Default value: 0 0
8105 # POSIX directory reading implementation
8107 cdl_interface CYGINT_ISO_DIRENT {
8108 # No options implement this inferface
8109 # This value cannot be modified here.
8112 # Requires: 1 >= CYGINT_ISO_DIRENT
8113 # CYGINT_ISO_DIRENT == 0
8116 # The following properties are affected by this value
8117 # interface CYGINT_ISO_DIRENT
8118 # Requires: 1 >= CYGINT_ISO_DIRENT
8121 # <dirent.h> definitions implementation header
8123 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8125 # No user value, uncomment the following line to provide one.
8127 # value_source default
8128 # Default value: 0 0
8131 # POSIX <sys/types.h> contents
8132 # This covers the types required by POSIX to be in
8135 cdl_component CYGPKG_ISO_POSIX_TYPES {
8136 # There is no associated value.
8140 # POSIX thread types implementations
8142 cdl_interface CYGINT_ISO_PTHREADTYPES {
8143 # No options implement this inferface
8144 # This value cannot be modified here.
8147 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8148 # CYGINT_ISO_PTHREADTYPES == 0
8151 # The following properties are affected by this value
8152 # interface CYGINT_ISO_PTHREADTYPES
8153 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8154 # interface CYGINT_ISO_PMUTEXTYPES
8155 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8158 # POSIX thread types implementation header
8160 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8162 # No user value, uncomment the following line to provide one.
8164 # value_source default
8165 # Default value: 0 0
8168 # POSIX mutex types implementations
8170 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8171 # No options implement this inferface
8172 # This value cannot be modified here.
8175 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8176 # CYGINT_ISO_PTHREADTYPES == 0
8180 # POSIX mutex types implementation header
8182 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8184 # No user value, uncomment the following line to provide one.
8186 # value_source default
8187 # Default value: 0 0
8190 # ssize_t implementation header
8192 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8194 # No user value, uncomment the following line to provide one.
8196 # value_source default
8197 # Default value: 0 0
8200 # Filesystem types implementation header
8202 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8204 # No user value, uncomment the following line to provide one.
8206 # value_source default
8207 # Default value: 0 0
8210 # gid_t, pid_t, uid_t implementation header
8212 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8214 # No user value, uncomment the following line to provide one.
8216 # value_source default
8217 # Default value: 0 0
8221 # Non-POSIX <sys/types.h> contents
8222 # This covers the extra types required by non-POSIX
8223 # packages to be in <sys/types.h>. These would normally
8224 # only be visible if _POSIX_SOURCE is not defined.
8226 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8227 # There is no associated value.
8231 # BSD compatible types
8233 cdl_interface CYGINT_ISO_BSDTYPES {
8234 # No options implement this inferface
8235 # This value cannot be modified here.
8238 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8239 # CYGINT_ISO_BSDTYPES == 0
8242 # The following properties are affected by this value
8243 # interface CYGINT_ISO_BSDTYPES
8244 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8249 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8251 # No user value, uncomment the following line to provide one.
8253 # value_source default
8254 # Default value: 0 0
8260 cdl_component CYGPKG_ISO_UTSNAME {
8261 # There is no associated value.
8267 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8269 # No user value, uncomment the following line to provide one.
8271 # value_source default
8272 # Default value: 0 0
8278 cdl_component CYGPKG_ISO_SCHED {
8279 # There is no associated value.
8283 # POSIX scheduler implementations
8285 cdl_interface CYGINT_ISO_SCHED_IMPL {
8286 # No options implement this inferface
8287 # This value cannot be modified here.
8290 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8291 # CYGINT_ISO_SCHED_IMPL == 0
8294 # The following properties are affected by this value
8295 # interface CYGINT_ISO_SCHED_IMPL
8296 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8299 # POSIX scheduler implementation header
8301 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8303 # No user value, uncomment the following line to provide one.
8305 # value_source default
8306 # Default value: 0 0
8312 cdl_component CYGPKG_ISO_SEMAPHORES {
8313 # There is no associated value.
8317 # POSIX semaphore implementations
8319 cdl_interface CYGINT_ISO_SEMAPHORES {
8320 # No options implement this inferface
8321 # This value cannot be modified here.
8324 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8325 # CYGINT_ISO_SEMAPHORES == 0
8328 # The following properties are affected by this value
8329 # interface CYGINT_ISO_SEMAPHORES
8330 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8333 # POSIX semaphore implementation header
8335 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8337 # No user value, uncomment the following line to provide one.
8339 # value_source default
8340 # Default value: 0 0
8344 # POSIX message queues
8346 cdl_component CYGPKG_ISO_MQUEUE {
8347 # There is no associated value.
8353 cdl_interface CYGINT_ISO_MQUEUE {
8354 # No options implement this inferface
8355 # This value cannot be modified here.
8358 # Requires: 1 >= CYGINT_ISO_MQUEUE
8359 # CYGINT_ISO_MQUEUE == 0
8362 # The following properties are affected by this value
8363 # interface CYGINT_ISO_MQUEUE
8364 # Requires: 1 >= CYGINT_ISO_MQUEUE
8365 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8366 # ActiveIf: CYGINT_ISO_MQUEUE
8367 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8368 # ActiveIf: CYGINT_ISO_MQUEUE
8371 # Implementation header
8373 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8375 # No user value, uncomment the following line to provide one.
8377 # value_source default
8378 # Default value: 0 0
8381 # Maximum number of open message queues
8383 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8384 # This option is not active
8385 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8386 # CYGINT_ISO_MQUEUE == 0
8390 # No user value, uncomment the following line to provide one.
8392 # value_source default
8393 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8394 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8395 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8399 # Maximum number of message priorities
8401 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8402 # This option is not active
8403 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8404 # CYGINT_ISO_MQUEUE == 0
8408 # No user value, uncomment the following line to provide one.
8409 # user_value 1 65535
8410 # value_source default
8411 # Default value: 1 65535
8417 cdl_component CYGPKG_ISO_PTHREAD {
8418 # There is no associated value.
8422 # POSIX pthread implementations
8424 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8425 # No options implement this inferface
8426 # This value cannot be modified here.
8428 # Current value: 0 0
8429 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8430 # CYGINT_ISO_PTHREAD_IMPL == 0
8433 # The following properties are affected by this value
8434 # interface CYGINT_ISO_PTHREAD_IMPL
8435 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8438 # POSIX pthread implementation header
8440 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8442 # No user value, uncomment the following line to provide one.
8444 # value_source default
8445 # Default value: 0 0
8448 # POSIX mutex/cond var implementations
8450 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8451 # No options implement this inferface
8452 # This value cannot be modified here.
8454 # Current value: 0 0
8455 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8456 # CYGINT_ISO_PTHREAD_MUTEX == 0
8459 # The following properties are affected by this value
8460 # interface CYGINT_ISO_PTHREAD_MUTEX
8461 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8464 # POSIX mutex/cond var implementation header
8466 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8468 # No user value, uncomment the following line to provide one.
8470 # value_source default
8471 # Default value: 0 0
8477 cdl_component CYGPKG_ISO_LIMITS {
8478 # There is no associated value.
8482 # POSIX pthread limits implementations
8484 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8485 # No options implement this inferface
8486 # This value cannot be modified here.
8489 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8490 # CYGINT_ISO_POSIX_LIMITS == 0
8493 # The following properties are affected by this value
8494 # interface CYGINT_ISO_POSIX_LIMITS
8495 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8498 # POSIX pthread limits implementation header
8500 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8502 # No user value, uncomment the following line to provide one.
8504 # value_source default
8505 # Default value: 0 0
8508 # OPEN_MAX implementation header
8510 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8512 # No user value, uncomment the following line to provide one.
8514 # value_source default
8515 # Default value: 0 0
8518 # LINK_MAX implementation header
8520 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8522 # No user value, uncomment the following line to provide one.
8524 # value_source default
8525 # Default value: 0 0
8528 # NAME_MAX implementation header
8530 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8532 # No user value, uncomment the following line to provide one.
8534 # value_source default
8535 # Default value: 0 0
8538 # PATH_MAX implementation header
8540 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8542 # No user value, uncomment the following line to provide one.
8544 # value_source default
8545 # Default value: 0 0
8551 cdl_component CYGPKG_ISO_TERMIOS {
8552 # There is no associated value.
8556 # POSIX termios implementations
8558 cdl_interface CYGINT_ISO_TERMIOS {
8559 # No options implement this inferface
8560 # This value cannot be modified here.
8563 # Requires: 1 >= CYGINT_ISO_TERMIOS
8564 # CYGINT_ISO_TERMIOS == 0
8567 # The following properties are affected by this value
8568 # interface CYGINT_ISO_TERMIOS
8569 # Requires: 1 >= CYGINT_ISO_TERMIOS
8572 # POSIX termios implementation header
8574 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8576 # No user value, uncomment the following line to provide one.
8578 # value_source default
8579 # Default value: 0 0
8585 cdl_component CYGPKG_ISO_DLFCN {
8586 # There is no associated value.
8590 # Dynamic load implementations
8592 cdl_interface CYGINT_ISO_DLFCN {
8593 # No options implement this inferface
8594 # This value cannot be modified here.
8597 # Requires: 1 >= CYGINT_ISO_DLFCN
8598 # CYGINT_ISO_DLFCN == 0
8601 # The following properties are affected by this value
8602 # interface CYGINT_ISO_DLFCN
8603 # Requires: 1 >= CYGINT_ISO_DLFCN
8606 # Dynamic load implementation header
8608 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8610 # No user value, uncomment the following line to provide one.
8612 # value_source default
8613 # Default value: 0 0
8617 # UNIX standard functions
8619 cdl_component CYGPKG_ISO_UNISTD {
8620 # There is no associated value.
8624 # POSIX timer operations implementations
8626 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8627 # No options implement this inferface
8628 # This value cannot be modified here.
8630 # Current value: 0 0
8631 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8632 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8635 # The following properties are affected by this value
8636 # interface CYGINT_ISO_POSIX_TIMER_OPS
8637 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8640 # POSIX timer operations implementation header
8642 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8644 # No user value, uncomment the following line to provide one.
8646 # value_source default
8647 # Default value: 0 0
8650 # POSIX sleep() implementations
8652 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8653 # No options implement this inferface
8654 # This value cannot be modified here.
8656 # Current value: 0 0
8657 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8658 # CYGINT_ISO_POSIX_SLEEP == 0
8661 # The following properties are affected by this value
8662 # interface CYGINT_ISO_POSIX_SLEEP
8663 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8666 # POSIX sleep() implementation header
8668 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8670 # No user value, uncomment the following line to provide one.
8672 # value_source default
8673 # Default value: 0 0
8677 # select()/poll() functions
8679 cdl_component CYGPKG_ISO_SELECT {
8680 # There is no associated value.
8684 # select() implementations
8686 cdl_interface CYGINT_ISO_SELECT {
8687 # No options implement this inferface
8688 # This value cannot be modified here.
8690 # Current value: 0 0
8691 # Requires: 1 >= CYGINT_ISO_SELECT
8692 # CYGINT_ISO_SELECT == 0
8695 # The following properties are affected by this value
8696 # interface CYGINT_ISO_SELECT
8697 # Requires: 1 >= CYGINT_ISO_SELECT
8700 # select() implementation header
8702 cdl_option CYGBLD_ISO_SELECT_HEADER {
8704 # No user value, uncomment the following line to provide one.
8706 # value_source default
8707 # Default value: 0 0
8710 # poll() implementations
8712 cdl_interface CYGINT_ISO_POLL {
8713 # No options implement this inferface
8714 # This value cannot be modified here.
8716 # Current value: 0 0
8717 # Requires: 1 >= CYGINT_ISO_POLL
8718 # CYGINT_ISO_POLL == 0
8721 # The following properties are affected by this value
8722 # interface CYGINT_ISO_POLL
8723 # Requires: 1 >= CYGINT_ISO_POLL
8726 # poll() implementation header
8728 cdl_option CYGBLD_ISO_POLL_HEADER {
8730 # No user value, uncomment the following line to provide one.
8732 # value_source default
8733 # Default value: 0 0
8737 # NetDB utility functions
8739 cdl_component CYGPKG_ISO_NETDB {
8740 # There is no associated value.
8744 # DNS implementations
8746 cdl_interface CYGINT_ISO_DNS {
8747 # No options implement this inferface
8748 # This value cannot be modified here.
8751 # Requires: 1 >= CYGINT_ISO_DNS
8752 # CYGINT_ISO_DNS == 0
8755 # The following properties are affected by this value
8756 # interface CYGINT_ISO_DNS
8757 # Requires: 1 >= CYGINT_ISO_DNS
8760 # DNS implementation header
8762 cdl_option CYGBLD_ISO_DNS_HEADER {
8764 # No user value, uncomment the following line to provide one.
8766 # value_source default
8767 # Default value: 0 0
8770 # Protocol network database implementations
8772 cdl_interface CYGINT_ISO_NETDB_PROTO {
8773 # No options implement this inferface
8774 # This value cannot be modified here.
8777 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8778 # CYGINT_ISO_NETDB_PROTO == 0
8781 # The following properties are affected by this value
8782 # interface CYGINT_ISO_NETDB_PROTO
8783 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8786 # Protocol network database implementation header
8788 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8790 # No user value, uncomment the following line to provide one.
8792 # value_source default
8793 # Default value: 0 0
8796 # Services network database implementations
8798 cdl_interface CYGINT_ISO_NETDB_SERV {
8799 # No options implement this inferface
8800 # This value cannot be modified here.
8803 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8804 # CYGINT_ISO_NETDB_SERV == 0
8807 # The following properties are affected by this value
8808 # interface CYGINT_ISO_NETDB_SERV
8809 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8812 # Services network database implementation header
8814 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8816 # No user value, uncomment the following line to provide one.
8818 # value_source default
8819 # Default value: 0 0
8824 # Package specific build options including control over
8825 # compiler flags used only in building this package,
8826 # and details of which tests are built.
8828 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8829 # There is no associated value.
8833 # Additional compiler flags
8834 # This option modifies the set of compiler flags for
8835 # building the ISO C and POSIX infrastructure package.
8836 # These flags are used in addition to the set of global flags.
8838 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8840 # No user value, uncomment the following line to provide one.
8842 # value_source default
8846 # Suppressed compiler flags
8847 # This option modifies the set of compiler flags for
8848 # building the ISO C and POSIX infrastructure package.
8849 # These flags are removed from the set of global flags
8852 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8854 # No user value, uncomment the following line to provide one.
8856 # value_source default
8863 # doc: ref/services-crc.html
8864 # This package provides support for CRC calculation. Currently
8865 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8866 # Gary S. Brown, and a 16 bit CRC.
8868 cdl_package CYGPKG_CRC {
8869 # Packages cannot be added or removed, nor can their version be changed,
8870 # simply by editing their value. Instead the appropriate configuration
8871 # should be used to perform these actions.
8873 # This value cannot be modified here.
8875 # Current value: 1 current
8877 # The following properties are affected by this value
8878 # package CYGPKG_COMPRESS_ZLIB
8879 # Requires: CYGPKG_CRC
8885 cdl_option CYGPKG_CRC_TESTS {
8886 # Calculated value: "tests/crc_test"
8888 # Current_value: tests/crc_test
8892 # Zlib compress and decompress package
8893 # This package provides support for compression and
8896 cdl_package CYGPKG_COMPRESS_ZLIB {
8897 # Packages cannot be added or removed, nor can their version be changed,
8898 # simply by editing their value. Instead the appropriate configuration
8899 # should be used to perform these actions.
8901 # This value cannot be modified here.
8903 # Current value: 1 current
8904 # Requires: CYGPKG_ISOINFRA
8905 # CYGPKG_ISOINFRA == current
8907 # Requires: CYGPKG_CRC
8908 # CYGPKG_CRC == current
8911 # The following properties are affected by this value
8912 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8913 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8917 # Override memory allocation routines.
8919 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8920 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8921 # This value cannot be modified here.
8925 # The following properties are affected by this value
8926 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8927 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8930 # Should deflate() produce 'gzip' compatible output?
8931 # If this option is set then the output of calling deflate()
8932 # will be wrapped up as a 'gzip' compatible file.
8934 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8936 # No user value, uncomment the following line to provide one.
8938 # value_source default
8942 # Does this library need malloc?
8943 # This pseudo-option will force the memalloc library to be
8944 # required iff the application does not provide it's own
8947 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8948 # This option is not active
8949 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8950 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8954 # No user value, uncomment the following line to provide one.
8956 # value_source default
8958 # Requires: CYGPKG_MEMALLOC
8959 # CYGPKG_MEMALLOC == current
8963 # Include stdio-like utility functions
8964 # This option enables the stdio-like zlib utility functions
8965 # (gzread/gzwrite and friends) provided in gzio.c.
8967 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8969 # No user value, uncomment the following line to provide one.
8971 # value_source default
8972 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8973 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8975 # Requires: CYGINT_ISO_STDIO_FILEPOS
8976 # CYGINT_ISO_STDIO_FILEPOS == 0
8978 # Requires: CYGINT_ISO_STRING_STRFUNCS
8979 # CYGINT_ISO_STRING_STRFUNCS == 1
8981 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8982 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8984 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8985 # CYGINT_ISO_STDIO_FILEACCESS == 0
8989 # Zlib compress and decompress package build options
8990 # Package specific build options including control over
8991 # compiler flags used only in building this package,
8992 # and details of which tests are built.
8994 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8995 # There is no associated value.
8999 # Additional compiler flags
9000 # This option modifies the set of compiler flags for
9001 # building this package. These flags are used in addition
9002 # to the set of global flags.
9004 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9006 # No user value, uncomment the following line to provide one.
9007 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9008 # value_source default
9009 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9012 # Suppressed compiler flags
9013 # This option modifies the set of compiler flags for
9014 # building this package. These flags are removed from
9015 # the set of global flags if present.
9017 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9019 # No user value, uncomment the following line to provide one.
9020 # user_value -Wstrict-prototypes
9021 # value_source default
9022 # Default value: -Wstrict-prototypes
9025 # Additional compiler flags
9026 # This option modifies the set of compiler flags for
9027 # building this package. These flags are used in addition
9028 # to the set of global flags.
9030 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9032 # No user value, uncomment the following line to provide one.
9034 # value_source default
9038 # Suppressed compiler flags
9039 # This option modifies the set of compiler flags for
9040 # building this package. These flags are removed from
9041 # the set of global flags if present.
9043 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9045 # No user value, uncomment the following line to provide one.
9047 # value_source default
9054 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9055 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9057 # Current_value: tests/zlib1.c tests/zlib2.c
9061 # FLASH device drivers
9062 # doc: ref/flash.html
9063 # This option enables drivers for basic I/O services on
9066 cdl_package CYGPKG_IO_FLASH {
9067 # Packages cannot be added or removed, nor can their version be changed,
9068 # simply by editing their value. Instead the appropriate configuration
9069 # should be used to perform these actions.
9071 # This value cannot be modified here.
9073 # Current value: 1 current
9074 # Requires: CYGPKG_ISOINFRA
9075 # CYGPKG_ISOINFRA == current
9077 # Requires: CYGINT_ISO_STRING_STRFUNCS
9078 # CYGINT_ISO_STRING_STRFUNCS == 1
9081 # The following properties are affected by this value
9082 # component CYGSEM_REDBOOT_FLASH_CONFIG
9083 # DefaultValue: CYGPKG_IO_FLASH != 0
9084 # package CYGPKG_DEVS_FLASH_ONMXC
9085 # ActiveIf: CYGPKG_IO_FLASH
9089 # Hardware FLASH device drivers
9090 # This option enables the hardware device drivers
9091 # for the current platform.
9093 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9094 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9095 # This value cannot be modified here.
9099 # The following properties are affected by this value
9100 # component CYGPKG_REDBOOT_FLASH
9101 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9104 # Hardware FLASH device drivers are not in RAM
9105 # Use of this interface is deprecated.
9106 # Drivers should make sure that the functions are
9107 # linked to RAM by putting them in .2ram sections.
9109 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9110 # No options implement this inferface
9111 # This value cannot be modified here.
9113 # Current value: 0 0
9114 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9115 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9118 # The following properties are affected by this value
9119 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9120 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9123 # Hardware can support block locking
9124 # This option will be enabled by devices which can support
9125 # locking (write-protection) of individual blocks.
9127 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9128 # No options implement this inferface
9129 # This value cannot be modified here.
9131 # Current value: 0 0
9133 # The following properties are affected by this value
9134 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9135 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9138 # Hardware cannot support direct access to FLASH memory
9139 # This option will be asserted by devices which cannot support
9140 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9141 # devices). In these cases, the driver must provide an appropriate
9142 # hardware access function.
9144 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9146 # No user value, uncomment the following line to provide one.
9148 # The inferred value should not be edited directly.
9150 # value_source inferred
9152 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9153 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9156 # The following properties are affected by this value
9157 # option CYGPRI_REDBOOT_ZLIB_FLASH
9158 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9159 # component CYGHWR_DEVS_FLASH_MMC
9160 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9161 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9162 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9163 # option CYGHWR_DEVS_FLASH_MMC_SD
9164 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9165 # option CYGHWR_DEVS_FLASH_MXC_NAND
9166 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9169 # Display status messages during flash operations
9170 # Selecting this option will cause the drivers to print status
9171 # messages as various flash operations are undertaken.
9173 cdl_option CYGSEM_IO_FLASH_CHATTER {
9175 # No user value, uncomment the following line to provide one.
9177 # value_source default
9181 # Verify data programmed to flash
9182 # Selecting this option will cause verification of data
9183 # programmed to flash.
9185 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9187 # No user value, uncomment the following line to provide one.
9189 # The inferred value should not be edited directly.
9191 # value_source inferred
9194 # The following properties are affected by this value
9195 # option CYGSEM_IO_FLASH_READ_INDIRECT
9196 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9199 # Platform has flash soft DIP switch write-protect
9200 # Selecting this option will cause the state of a hardware jumper or
9201 # dipswitch to be read by software to determine whether the flash is
9202 # write-protected or not.
9204 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9206 # No user value, uncomment the following line to provide one.
9208 # value_source default
9212 # Instantiate in I/O block device API
9213 # Provides a block device accessible using the standard I/O
9214 # API ( cyg_io_read() etc. )
9216 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9217 # This option is not active
9218 # ActiveIf constraint: CYGPKG_IO
9219 # CYGPKG_IO (unknown) == 0
9223 # No user value, uncomment the following line to provide one.
9225 # value_source default
9230 # Name of flash device 1 block device
9232 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9233 # This option is not active
9234 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9235 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9238 # No user value, uncomment the following line to provide one.
9239 # user_value "\"/dev/flash1\""
9240 # value_source default
9241 # Default value: "\"/dev/flash1\""
9246 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9247 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9248 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9249 # This option is not active
9250 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9252 # This value cannot be modified here.
9255 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9256 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9259 # The following properties are affected by this value
9260 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9261 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9264 # Static configuration
9265 # This configures the flash device 1 block device
9266 # with static base and length
9268 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9269 # This option is not active
9270 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9273 # No user value, uncomment the following line to provide one.
9275 # value_source default
9280 # Start offset from flash base
9281 # This gives the offset from the base of flash which this
9282 # block device corresponds to.
9284 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9285 # This option is not active
9286 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9289 # No user value, uncomment the following line to provide one.
9290 # user_value 0x00100000
9291 # value_source default
9292 # Default value: 0x00100000
9296 # This gives the length of the region of flash given over
9297 # to this block device.
9299 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9300 # This option is not active
9301 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9304 # No user value, uncomment the following line to provide one.
9305 # user_value 0x00100000
9306 # value_source default
9307 # Default value: 0x00100000
9311 # Configuration from FIS
9312 # This configures the flash device 1 block device
9315 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9316 # This option is not active
9317 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9320 # No user value, uncomment the following line to provide one.
9322 # value_source default
9329 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9330 # This option is not active
9331 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9332 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9335 # No user value, uncomment the following line to provide one.
9336 # user_value "\"jffs2\""
9337 # value_source default
9338 # Default value: "\"jffs2\""
9344 # Flash device driver build options
9345 # Package specific build options including control over
9346 # compiler flags used only in building this package,
9347 # and details of which tests are built.
9349 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9350 # There is no associated value.
9354 # Additional compiler flags
9355 # This option modifies the set of compiler flags for
9356 # building the flash device drivers. These flags are used in addition
9357 # to the set of global flags.
9359 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9361 # No user value, uncomment the following line to provide one.
9363 # value_source default
9367 # Suppressed compiler flags
9368 # This option modifies the set of compiler flags for
9369 # building the flash device drivers. These flags are removed from
9370 # the set of global flags if present.
9372 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9374 # No user value, uncomment the following line to provide one.
9376 # value_source default
9380 # Flash device driver tests
9381 # This option specifies the set of tests for the flash device drivers.
9383 cdl_component CYGPKG_IO_FLASH_TESTS {
9384 # Calculated value: "tests/flash1"
9386 # Current_value: tests/flash1
9390 # Start offset from flash base
9391 # This gives the offset from the base of flash where tests
9392 # can be run. It is important to set this correctly, as an
9393 # incorrect value could allow the tests to write over critical
9394 # portions of the FLASH device and possibly render the target
9395 # board totally non-functional.
9397 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9399 # No user value, uncomment the following line to provide one.
9400 # user_value 0x00100000
9401 # value_source default
9402 # Default value: 0x00100000
9406 # This gives the length of the region of flash used for testing.
9408 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9410 # No user value, uncomment the following line to provide one.
9411 # user_value 0x00100000
9412 # value_source default
9413 # Default value: 0x00100000
9418 # Support FLASH memory on Freescale MXC platforms
9420 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9421 # Packages cannot be added or removed, nor can their version be changed,
9422 # simply by editing their value. Instead the appropriate configuration
9423 # should be used to perform these actions.
9425 # ActiveIf constraint: CYGPKG_IO_FLASH
9426 # CYGPKG_IO_FLASH == current
9429 # This value cannot be modified here.
9431 # Current value: 1 current
9435 # MXC platform MMC card support
9436 # When this option is enabled, it indicates MMC card is
9437 # supported on the MXC platforms
9439 cdl_component CYGHWR_DEVS_FLASH_MMC {
9441 # No user value, uncomment the following line to provide one.
9443 # value_source default
9445 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9446 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9449 # The following properties are affected by this value
9450 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9451 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9452 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9453 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9454 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9455 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9456 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9457 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9461 # MXC platform MMC card for newer SDHC controllers
9463 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9464 # This option is not active
9465 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9466 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9467 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51
9468 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9469 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9470 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9471 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9475 # No user value, uncomment the following line to provide one.
9477 # value_source default
9479 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9480 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9484 # MXC platform MMC card for older MMC/SD controllers
9486 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9487 # This option is not active
9488 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9489 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9490 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9491 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9495 # No user value, uncomment the following line to provide one.
9497 # value_source default
9499 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9500 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9505 # MXC platform NOR flash memory support
9506 # When this option is enabled, it indicates NOR flash is
9507 # supported on the MXC platforms
9509 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9511 # No user value, uncomment the following line to provide one.
9513 # The inferred value should not be edited directly.
9515 # value_source inferred
9518 # The following properties are affected by this value
9519 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9520 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9521 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9522 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9523 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9524 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9525 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9526 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9527 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9528 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9531 # MXC platform NAND flash memory support
9532 # When this option is enabled, it indicates NAND flash is
9533 # supported on the MXC platforms
9535 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9537 # No user value, uncomment the following line to provide one.
9539 # The inferred value should not be edited directly.
9541 # value_source inferred
9543 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9544 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9547 # The following properties are affected by this value
9548 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9549 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9550 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9551 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9552 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9553 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9554 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9555 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9556 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9557 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9558 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9559 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9562 # i.MX platform SPI NOR flash memory support
9563 # When this option is enabled, it indicates SPI NOR flash is
9564 # supported on the i.MX platforms
9566 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9568 # No user value, uncomment the following line to provide one.
9570 # value_source default
9572 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9573 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9577 # MXC platform ATA support
9578 # When this option is enabled, it indicates ATA is
9579 # supported on the MXC platforms
9581 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9583 # No user value, uncomment the following line to provide one.
9585 # value_source default
9589 # Use a flash based Bad Block Table
9591 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9592 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9593 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9596 # There is no associated value.
9600 # When this option is enabled, the driver will search for a flash
9601 # based bad block table
9603 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9605 # No user value, uncomment the following line to provide one.
9607 # value_source default
9611 # header file defining the NAND BBT descriptor
9612 # defines the name of the header file that describes the BBT layout
9614 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9616 # No user value, uncomment the following line to provide one.
9618 # The inferred value should not be edited directly.
9619 inferred_value 1 <cyg/io/tx53_nand_bbt.h>
9620 # value_source inferred
9621 # Default value: 0 0
9624 # Number of blocks to reserve for BBT
9625 # Number of blocks to reserve for BBT
9627 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9629 # No user value, uncomment the following line to provide one.
9631 # value_source default
9636 # MXC platform multi flash memory support
9637 # When this option is enabled, it indicates multi flashes are
9638 # supported on the MXC platforms (like NAND and NOR)
9640 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9641 # This option is not active
9642 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9643 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9644 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9645 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9646 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9647 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9648 # CYGHWR_DEVS_FLASH_MMC == 0
9649 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9650 # CYGHWR_DEVS_FLASH_MMC == 0
9654 # No user value, uncomment the following line to provide one.
9656 # The inferred value should not be edited directly.
9658 # value_source inferred
9662 # MXC platform NAND flash reset workaround support
9663 # When this option is enabled, it indicates 0xFFFF is used for
9664 # the NAND reset command instead of 0xFF.
9666 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9667 # No options implement this inferface
9668 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9669 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9672 # This value cannot be modified here.
9679 # Dynamic memory allocation
9680 # doc: ref/memalloc.html
9681 # This package provides memory allocator infrastructure required for
9682 # dynamic memory allocators, including the ISO standard malloc
9683 # interface. It also contains some sample implementations.
9685 cdl_package CYGPKG_MEMALLOC {
9686 # Packages cannot be added or removed, nor can their version be changed,
9687 # simply by editing their value. Instead the appropriate configuration
9688 # should be used to perform these actions.
9690 # This value cannot be modified here.
9692 # Current value: 1 current
9694 # The following properties are affected by this value
9695 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9696 # Requires: CYGPKG_MEMALLOC
9700 # Memory allocator implementations
9701 # This component contains configuration options related to the
9702 # various memory allocators available.
9704 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9705 # There is no associated value.
9709 # Fixed block allocator
9710 # This component contains configuration options related to the
9711 # fixed block memory allocator.
9713 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9714 # There is no associated value.
9719 # With this option enabled, this allocator will be
9720 # made thread-safe. Additionally allocation functions
9721 # are made available that allow a thread to wait
9722 # until memory is available.
9724 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9725 # This option is not active
9726 # ActiveIf constraint: CYGPKG_KERNEL
9727 # CYGPKG_KERNEL (unknown) == 0
9731 # No user value, uncomment the following line to provide one.
9733 # value_source default
9738 # Simple variable block allocator
9739 # This component contains configuration options related to the
9740 # simple variable block memory allocator. This allocator is not
9741 # very fast, and in particular does not scale well with large
9742 # numbers of allocations. It is however very compact in terms of
9743 # code size and does not have very much overhead per allocation.
9745 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9746 # There is no associated value.
9751 # With this option enabled, this allocator will be
9752 # made thread-safe. Additionally allocation functions
9753 # are added that allow a thread to wait until memory
9754 # are made available that allow a thread to wait
9755 # until memory is available.
9757 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9758 # This option is not active
9759 # ActiveIf constraint: CYGPKG_KERNEL
9760 # CYGPKG_KERNEL (unknown) == 0
9764 # No user value, uncomment the following line to provide one.
9766 # value_source default
9771 # The variable-block memory allocator can perform coalescing
9772 # of memory whenever the application code releases memory back
9773 # to the pool. This coalescing reduces the possibility of
9774 # memory fragmentation problems, but involves extra code and
9777 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9779 # No user value, uncomment the following line to provide one.
9781 # value_source default
9784 # The following properties are affected by this value
9785 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9786 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9791 # This component contains configuration options related to the
9792 # port of Doug Lea's memory allocator, normally known as
9793 # dlmalloc. dlmalloc has a reputation for being both fast
9794 # and space-conserving, as well as resisting fragmentation well.
9795 # It is a common choice for a general purpose allocator and
9796 # has been used in both newlib and Linux glibc.
9798 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9799 # There is no associated value.
9804 # Doug Lea's malloc implementation has substantial amounts
9805 # of internal checking in order to verify the operation
9806 # and consistency of the allocator. However this imposes
9807 # substantial overhead on each operation. Therefore this
9808 # checking may be individually disabled.
9810 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9812 # No user value, uncomment the following line to provide one.
9814 # value_source default
9815 # Default value: 0 != CYGDBG_USE_ASSERTS
9816 # CYGDBG_USE_ASSERTS == 0
9818 # Requires: CYGDBG_USE_ASSERTS
9819 # CYGDBG_USE_ASSERTS == 0
9824 # With this option enabled, this allocator will be
9825 # made thread-safe. Additionally allocation functions
9826 # are made available that allow a thread to wait
9827 # until memory is available.
9829 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9830 # This option is not active
9831 # ActiveIf constraint: CYGPKG_KERNEL
9832 # CYGPKG_KERNEL (unknown) == 0
9836 # No user value, uncomment the following line to provide one.
9838 # value_source default
9840 # Requires: CYGPKG_KERNEL
9841 # CYGPKG_KERNEL (unknown) == 0
9845 # Support more than one instance
9846 # Having this option disabled allows important
9847 # implementation structures to be declared as a single
9848 # static instance, allowing faster access. However this
9849 # would fail if there is more than one instance of
9850 # the dlmalloc allocator class. Therefore this option can
9851 # be enabled if multiple instances are required. Note: as
9852 # a special case, if this allocator is used as the
9853 # implementation of malloc, and it can be determined there
9854 # is more than one malloc pool, then this option will be
9857 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9859 # No user value, uncomment the following line to provide one.
9861 # value_source default
9865 # Use system memmove() and memset()
9866 # This may be used to control whether memset() and memmove()
9867 # are used within the implementation. The alternative is
9868 # to use some macro equivalents, which some people report
9869 # are faster in some circumstances.
9871 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9873 # No user value, uncomment the following line to provide one.
9875 # value_source default
9876 # Default value: 0 != CYGPKG_ISOINFRA
9877 # CYGPKG_ISOINFRA == current
9879 # Requires: CYGPKG_ISOINFRA
9880 # CYGPKG_ISOINFRA == current
9884 # Minimum alignment of allocated blocks
9885 # This option controls the minimum alignment that the
9886 # allocated memory blocks are aligned on, specified as
9887 # 2^N. Note that using large mininum alignments can lead
9888 # to excessive memory wastage.
9890 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9892 # No user value, uncomment the following line to provide one.
9894 # value_source default
9896 # Legal values: 3 to 10
9900 # Variable block allocator with separate metadata
9901 # This component contains configuration options related to the
9902 # variable block memory allocator with separate metadata.
9904 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9905 # There is no associated value.
9910 # With this option enabled, this allocator will be
9911 # made thread-safe. Additionally allocation functions
9912 # are made available that allow a thread to wait
9913 # until memory is available.
9915 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9916 # This option is not active
9917 # ActiveIf constraint: CYGPKG_KERNEL
9918 # CYGPKG_KERNEL (unknown) == 0
9922 # No user value, uncomment the following line to provide one.
9924 # value_source default
9930 # Kernel C API support for memory allocation
9931 # This option must be enabled to provide the extensions required
9932 # to support integration into the kernel C API.
9934 cdl_option CYGFUN_MEMALLOC_KAPI {
9935 # This option is not active
9936 # ActiveIf constraint: CYGPKG_KERNEL
9937 # CYGPKG_KERNEL (unknown) == 0
9941 # No user value, uncomment the following line to provide one.
9943 # value_source default
9944 # Default value: CYGFUN_KERNEL_API_C
9945 # CYGFUN_KERNEL_API_C (unknown) == 0
9949 # malloc(0) returns NULL
9950 # This option controls the behavior of malloc(0) ( or calloc with
9951 # either argument 0 ). It is permitted by the standard to return
9952 # either a NULL pointer or a unique pointer. Enabling this option
9953 # forces a NULL pointer to be returned.
9955 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9957 # No user value, uncomment the following line to provide one.
9959 # value_source default
9963 # Breakpoint site when running out of memory
9964 # Whenever the system runs out of memory, it invokes this function
9965 # before either going to sleep waiting for memory to become
9966 # available or returning failure.
9968 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9970 # No user value, uncomment the following line to provide one.
9972 # value_source default
9976 # malloc() and supporting allocators
9977 # This component enables support for dynamic memory
9978 # allocation as supplied by the functions malloc(),
9979 # free(), calloc() and realloc(). As these
9980 # functions are often used, but can have quite an
9981 # overhead, disabling them here can ensure they
9982 # cannot even be used accidentally when static
9983 # allocation is preferred. Within this component are
9984 # various allocators that can be selected for use
9985 # as the underlying implementation of the dynamic
9986 # allocation functions.
9988 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9989 # ActiveIf constraint: CYGPKG_ISOINFRA
9990 # CYGPKG_ISOINFRA == current
9994 # No user value, uncomment the following line to provide one.
9996 # value_source default
10001 # Use external heap definition
10002 # This option allows other components in the
10003 # system to override the default system
10004 # provision of heap memory pools. This should
10005 # be set to a header which provides the equivalent
10006 # definitions to <pkgconf/heaps.hxx>.
10008 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10010 # No user value, uncomment the following line to provide one.
10012 # value_source default
10013 # Default value: 0 0
10016 # Use external implementation of joining multiple heaps
10017 # The default implementation of joining multiple heaps
10018 # is fine for the case where there are multiple disjoint
10019 # memory regions of the same type. However, in a system
10020 # there might be e.g. a small amount of internal SRAM and
10021 # a large amount of external DRAM. The SRAM is faster and
10022 # the DRAM is slower. An application can implement some
10023 # heuristic to choose which pool to allocate from. This
10024 # heuristic can be highly application specific.
10026 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10028 # No user value, uncomment the following line to provide one.
10030 # value_source default
10031 # Default value: 0 0
10034 # malloc() allocator implementations
10036 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10037 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10038 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10039 # This value cannot be modified here.
10042 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10043 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10046 # The following properties are affected by this value
10047 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10048 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10051 # malloc() implementation instantiation data
10052 # Memory allocator implementations that are capable of being
10053 # used underneath malloc() must be instantiated. The code
10054 # to do this is set in this option. It is only intended to
10055 # be set by the implementation, not the user.
10057 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10059 # No user value, uncomment the following line to provide one.
10060 # user_value <cyg/memalloc/dlmalloc.hxx>
10061 # value_source default
10062 # Default value: <cyg/memalloc/dlmalloc.hxx>
10064 # The following properties are affected by this value
10065 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10066 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10067 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10068 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10071 # Simple variable block implementation
10072 # This causes malloc() to use the simple
10073 # variable block allocator.
10075 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10077 # No user value, uncomment the following line to provide one.
10079 # value_source default
10081 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10082 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10084 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10085 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10089 # Doug Lea's malloc implementation
10090 # This causes malloc() to use a version of Doug Lea's
10091 # malloc (dlmalloc) as the underlying implementation.
10093 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10095 # No user value, uncomment the following line to provide one.
10097 # value_source default
10099 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10100 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10105 # Size of the fallback dynamic memory pool in bytes
10106 # If *no* heaps are configured in your memory layout,
10107 # dynamic memory allocation by
10108 # malloc() and calloc() must be from a fixed-size,
10109 # contiguous memory pool (note here that it is the
10110 # pool that is of a fixed size, but malloc() is still
10111 # able to allocate variable sized chunks of memory
10112 # from it). This option is the size
10113 # of that pool, in bytes. Note that not all of
10114 # this is available for programs to
10115 # use - some is needed for internal information
10116 # about memory regions, and some may be lost to
10117 # ensure that memory allocation only returns
10118 # memory aligned on word (or double word)
10119 # boundaries - a very common architecture
10122 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10124 # No user value, uncomment the following line to provide one.
10126 # value_source default
10127 # Default value: 16384
10128 # Legal values: 32 to 0x7fffffff
10131 # Common memory allocator package build options
10132 # Package specific build options including control over
10133 # compiler flags used only in building this package,
10134 # and details of which tests are built.
10136 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10137 # There is no associated value.
10141 # Additional compiler flags
10142 # This option modifies the set of compiler flags for
10143 # building this package. These flags are used in addition
10144 # to the set of global flags.
10146 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10148 # No user value, uncomment the following line to provide one.
10149 # user_value "-fno-rtti -Woverloaded-virtual"
10150 # value_source default
10151 # Default value: "-fno-rtti -Woverloaded-virtual"
10154 # Suppressed compiler flags
10155 # This option modifies the set of compiler flags for
10156 # building this package. These flags are removed from
10157 # the set of global flags if present.
10159 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10161 # No user value, uncomment the following line to provide one.
10162 # user_value -Wno-pointer-sign
10163 # value_source default
10164 # Default value: -Wno-pointer-sign
10168 # This option specifies the set of tests for this package.
10170 cdl_option CYGPKG_MEMALLOC_TESTS {
10171 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10173 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10178 # Common error code support
10179 # This package contains the common list of error and
10180 # status codes. It is held centrally to allow
10181 # packages to interchange error codes and status
10182 # codes in a common way, rather than each package
10183 # having its own conventions for error/status
10184 # reporting. The error codes are modelled on the
10185 # POSIX style naming e.g. EINVAL etc. This package
10186 # also provides the standard strerror() function to
10187 # convert error codes to textual representation, as
10188 # well as an implementation of the errno idiom.
10190 cdl_package CYGPKG_ERROR {
10191 # Packages cannot be added or removed, nor can their version be changed,
10192 # simply by editing their value. Instead the appropriate configuration
10193 # should be used to perform these actions.
10195 # This value cannot be modified here.
10197 # Current value: 1 current
10198 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10199 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10205 # This package controls the behaviour of the
10206 # errno variable (or more strictly, expression)
10209 cdl_component CYGPKG_ERROR_ERRNO {
10211 # No user value, uncomment the following line to provide one.
10213 # value_source default
10215 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10216 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10222 # This option controls whether the standard error
10223 # code reporting variable errno is a per-thread
10224 # variable, rather than global.
10226 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10228 # No user value, uncomment the following line to provide one.
10230 # The inferred value should not be edited directly.
10232 # value_source inferred
10234 # Requires: CYGVAR_KERNEL_THREADS_DATA
10235 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10240 # Trace verbosity level for debugging the errno
10241 # retrieval mechanism in errno.cxx. Increase this
10242 # value to get additional trace output.
10244 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10246 # No user value, uncomment the following line to provide one.
10248 # value_source default
10250 # Legal values: 0 to 1
10254 # strerror function
10255 # This package controls the presence and behaviour of the
10256 # strerror() function from <string.h>
10258 cdl_option CYGPKG_ERROR_STRERROR {
10260 # No user value, uncomment the following line to provide one.
10262 # value_source default
10264 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10265 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10269 # Error package build options
10270 # Package specific build options including control over
10271 # compiler flags used only in building this package,
10272 # and details of which tests are built.
10274 cdl_component CYGPKG_ERROR_OPTIONS {
10275 # There is no associated value.
10279 # Additional compiler flags
10280 # This option modifies the set of compiler flags for
10281 # building the error package. These flags are used in addition
10282 # to the set of global flags.
10284 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10286 # No user value, uncomment the following line to provide one.
10288 # value_source default
10289 # Default value: ""
10292 # Suppressed compiler flags
10293 # This option modifies the set of compiler flags for
10294 # building the error package. These flags are removed from
10295 # the set of global flags if present.
10297 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10299 # No user value, uncomment the following line to provide one.
10301 # value_source default
10302 # Default value: ""
10307 # I2C driver for FSL MXC-based platforms
10309 cdl_package CYGPKG_DEVS_MXC_I2C {
10310 # Packages cannot be added or removed, nor can their version be changed,
10311 # simply by editing their value. Instead the appropriate configuration
10312 # should be used to perform these actions.
10314 # This value cannot be modified here.
10316 # Current value: 1 current
10319 # ipu driver for mxc
10321 cdl_package CYGPKG_DEVS_IMX_IPU {
10322 # Packages cannot be added or removed, nor can their version be changed,
10323 # simply by editing their value. Instead the appropriate configuration
10324 # should be used to perform these actions.
10326 # This value cannot be modified here.
10328 # Current value: 1 current
10330 # The following properties are affected by this value
10331 # option CYGHWR_MX53_LCD_LOGO
10332 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10336 # IPU version 3EX support
10337 # When this option is enabled, it indicates the IPU version
10340 cdl_option CYGHWR_DEVS_IPU_3_EX {
10342 # No user value, uncomment the following line to provide one.
10344 # The inferred value should not be edited directly.
10346 # value_source inferred
10350 # IPU version 3D support
10351 # When this option is enabled, it indicates the IPU version
10354 cdl_option CYGHWR_DEVS_IPU_3_D {
10356 # No user value, uncomment the following line to provide one.
10358 # value_source default