3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <asm/unaligned.h>
29 #include <net/bluetooth/bluetooth.h>
30 #include <net/bluetooth/hci_core.h>
38 static bool disable_scofix;
39 static bool force_scofix;
41 static bool reset = true;
43 static struct usb_driver btusb_driver;
45 #define BTUSB_IGNORE 0x01
46 #define BTUSB_DIGIANSWER 0x02
47 #define BTUSB_CSR 0x04
48 #define BTUSB_SNIFFER 0x08
49 #define BTUSB_BCM92035 0x10
50 #define BTUSB_BROKEN_ISOC 0x20
51 #define BTUSB_WRONG_SCO_MTU 0x40
52 #define BTUSB_ATH3012 0x80
53 #define BTUSB_INTEL 0x100
54 #define BTUSB_INTEL_BOOT 0x200
55 #define BTUSB_BCM_PATCHRAM 0x400
56 #define BTUSB_MARVELL 0x800
57 #define BTUSB_SWAVE 0x1000
58 #define BTUSB_INTEL_NEW 0x2000
59 #define BTUSB_AMP 0x4000
60 #define BTUSB_QCA_ROME 0x8000
61 #define BTUSB_BCM_APPLE 0x10000
62 #define BTUSB_REALTEK 0x20000
63 #define BTUSB_BCM2045 0x40000
65 static const struct usb_device_id btusb_table[] = {
66 /* Generic Bluetooth USB device */
67 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
69 /* Generic Bluetooth AMP device */
70 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
72 /* Generic Bluetooth USB interface */
73 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
75 /* Apple-specific (Broadcom) devices */
76 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
77 .driver_info = BTUSB_BCM_APPLE },
79 /* MediaTek MT76x0E */
80 { USB_DEVICE(0x0e8d, 0x763f) },
82 /* Broadcom SoftSailing reporting vendor specific */
83 { USB_DEVICE(0x0a5c, 0x21e1) },
85 /* Apple MacBookPro 7,1 */
86 { USB_DEVICE(0x05ac, 0x8213) },
89 { USB_DEVICE(0x05ac, 0x8215) },
91 /* Apple MacBookPro6,2 */
92 { USB_DEVICE(0x05ac, 0x8218) },
94 /* Apple MacBookAir3,1, MacBookAir3,2 */
95 { USB_DEVICE(0x05ac, 0x821b) },
97 /* Apple MacBookAir4,1 */
98 { USB_DEVICE(0x05ac, 0x821f) },
100 /* Apple MacBookPro8,2 */
101 { USB_DEVICE(0x05ac, 0x821a) },
103 /* Apple MacMini5,1 */
104 { USB_DEVICE(0x05ac, 0x8281) },
106 /* AVM BlueFRITZ! USB v2.0 */
107 { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
109 /* Bluetooth Ultraport Module from IBM */
110 { USB_DEVICE(0x04bf, 0x030a) },
112 /* ALPS Modules with non-standard id */
113 { USB_DEVICE(0x044e, 0x3001) },
114 { USB_DEVICE(0x044e, 0x3002) },
116 /* Ericsson with non-standard id */
117 { USB_DEVICE(0x0bdb, 0x1002) },
119 /* Canyon CN-BTU1 with HID interfaces */
120 { USB_DEVICE(0x0c10, 0x0000) },
122 /* Broadcom BCM20702A0 */
123 { USB_DEVICE(0x413c, 0x8197) },
125 /* Broadcom BCM20702B0 (Dynex/Insignia) */
126 { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
128 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
129 { USB_DEVICE(0x105b, 0xe065), .driver_info = BTUSB_BCM_PATCHRAM },
131 /* Foxconn - Hon Hai */
132 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
133 .driver_info = BTUSB_BCM_PATCHRAM },
135 /* Lite-On Technology - Broadcom based */
136 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
137 .driver_info = BTUSB_BCM_PATCHRAM },
139 /* Broadcom devices with vendor specific id */
140 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
141 .driver_info = BTUSB_BCM_PATCHRAM },
143 /* ASUSTek Computer - Broadcom based */
144 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
145 .driver_info = BTUSB_BCM_PATCHRAM },
147 /* Belkin F8065bf - Broadcom based */
148 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
149 .driver_info = BTUSB_BCM_PATCHRAM },
151 /* IMC Networks - Broadcom based */
152 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
153 .driver_info = BTUSB_BCM_PATCHRAM },
155 /* Intel Bluetooth USB Bootloader (RAM module) */
156 { USB_DEVICE(0x8087, 0x0a5a),
157 .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
159 { } /* Terminating entry */
162 MODULE_DEVICE_TABLE(usb, btusb_table);
164 static const struct usb_device_id blacklist_table[] = {
165 /* CSR BlueCore devices */
166 { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
168 /* Broadcom BCM2033 without firmware */
169 { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
171 /* Broadcom BCM2045 devices */
172 { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },
174 /* Atheros 3011 with sflash firmware */
175 { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
176 { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
177 { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
178 { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
179 { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
180 { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
181 { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
183 /* Atheros AR9285 Malbec with sflash firmware */
184 { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
186 /* Atheros 3012 with sflash firmware */
187 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
188 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
189 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
190 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
191 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
192 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
193 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
194 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
195 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
196 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
197 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
198 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
199 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
200 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
201 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
202 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
203 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
204 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
205 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
206 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
207 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
208 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
209 { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
210 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
211 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
212 { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
213 { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
214 { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
215 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
216 { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
217 { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
218 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
219 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
220 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
221 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
222 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
223 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
224 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
225 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
226 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
227 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
228 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
229 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
231 /* Atheros AR5BBU12 with sflash firmware */
232 { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
234 /* Atheros AR5BBU12 with sflash firmware */
235 { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
236 { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
238 /* QCA ROME chipset */
239 { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
240 { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
241 { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
243 /* Broadcom BCM2035 */
244 { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
245 { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
246 { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
248 /* Broadcom BCM2045 */
249 { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
250 { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
252 /* IBM/Lenovo ThinkPad with Broadcom chip */
253 { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
254 { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
256 /* HP laptop with Broadcom chip */
257 { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
259 /* Dell laptop with Broadcom chip */
260 { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
262 /* Dell Wireless 370 and 410 devices */
263 { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
264 { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
266 /* Belkin F8T012 and F8T013 devices */
267 { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
268 { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
270 /* Asus WL-BTD202 device */
271 { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
273 /* Kensington Bluetooth USB adapter */
274 { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
276 /* RTX Telecom based adapters with buggy SCO support */
277 { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
278 { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
280 /* CONWISE Technology based adapters with buggy SCO support */
281 { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
283 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
284 { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
286 /* Digianswer devices */
287 { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
288 { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
290 /* CSR BlueCore Bluetooth Sniffer */
291 { USB_DEVICE(0x0a12, 0x0002),
292 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
294 /* Frontline ComProbe Bluetooth Sniffer */
295 { USB_DEVICE(0x16d3, 0x0002),
296 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
298 /* Marvell Bluetooth devices */
299 { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
300 { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
302 /* Intel Bluetooth devices */
303 { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
304 { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
305 { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
306 { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
308 /* Other Intel Bluetooth devices */
309 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
310 .driver_info = BTUSB_IGNORE },
312 /* Realtek Bluetooth devices */
313 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
314 .driver_info = BTUSB_REALTEK },
316 /* Additional Realtek 8723AE Bluetooth devices */
317 { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
318 { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
320 /* Additional Realtek 8723BE Bluetooth devices */
321 { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
322 { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
323 { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
324 { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
325 { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
327 /* Additional Realtek 8821AE Bluetooth devices */
328 { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
329 { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
330 { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
331 { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
332 { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
334 /* Silicon Wave based devices */
335 { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
337 { } /* Terminating entry */
340 #define BTUSB_MAX_ISOC_FRAMES 10
342 #define BTUSB_INTR_RUNNING 0
343 #define BTUSB_BULK_RUNNING 1
344 #define BTUSB_ISOC_RUNNING 2
345 #define BTUSB_SUSPENDING 3
346 #define BTUSB_DID_ISO_RESUME 4
347 #define BTUSB_BOOTLOADER 5
348 #define BTUSB_DOWNLOADING 6
349 #define BTUSB_FIRMWARE_LOADED 7
350 #define BTUSB_FIRMWARE_FAILED 8
351 #define BTUSB_BOOTING 9
352 #define BTUSB_RESET_RESUME 10
353 #define BTUSB_DIAG_RUNNING 11
356 struct hci_dev *hdev;
357 struct usb_device *udev;
358 struct usb_interface *intf;
359 struct usb_interface *isoc;
360 struct usb_interface *diag;
364 struct work_struct work;
365 struct work_struct waker;
367 struct usb_anchor deferred;
368 struct usb_anchor tx_anchor;
372 struct usb_anchor intr_anchor;
373 struct usb_anchor bulk_anchor;
374 struct usb_anchor isoc_anchor;
375 struct usb_anchor diag_anchor;
378 struct sk_buff *evt_skb;
379 struct sk_buff *acl_skb;
380 struct sk_buff *sco_skb;
382 struct usb_endpoint_descriptor *intr_ep;
383 struct usb_endpoint_descriptor *bulk_tx_ep;
384 struct usb_endpoint_descriptor *bulk_rx_ep;
385 struct usb_endpoint_descriptor *isoc_tx_ep;
386 struct usb_endpoint_descriptor *isoc_rx_ep;
387 struct usb_endpoint_descriptor *diag_tx_ep;
388 struct usb_endpoint_descriptor *diag_rx_ep;
393 unsigned int sco_num;
397 int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
398 int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
400 int (*setup_on_usb)(struct hci_dev *hdev);
403 static inline void btusb_free_frags(struct btusb_data *data)
407 spin_lock_irqsave(&data->rxlock, flags);
409 kfree_skb(data->evt_skb);
410 data->evt_skb = NULL;
412 kfree_skb(data->acl_skb);
413 data->acl_skb = NULL;
415 kfree_skb(data->sco_skb);
416 data->sco_skb = NULL;
418 spin_unlock_irqrestore(&data->rxlock, flags);
421 static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
426 spin_lock(&data->rxlock);
433 skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
439 bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
440 bt_cb(skb)->expect = HCI_EVENT_HDR_SIZE;
443 len = min_t(uint, bt_cb(skb)->expect, count);
444 memcpy(skb_put(skb, len), buffer, len);
448 bt_cb(skb)->expect -= len;
450 if (skb->len == HCI_EVENT_HDR_SIZE) {
451 /* Complete event header */
452 bt_cb(skb)->expect = hci_event_hdr(skb)->plen;
454 if (skb_tailroom(skb) < bt_cb(skb)->expect) {
463 if (bt_cb(skb)->expect == 0) {
465 data->recv_event(data->hdev, skb);
471 spin_unlock(&data->rxlock);
476 static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
481 spin_lock(&data->rxlock);
488 skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
494 bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT;
495 bt_cb(skb)->expect = HCI_ACL_HDR_SIZE;
498 len = min_t(uint, bt_cb(skb)->expect, count);
499 memcpy(skb_put(skb, len), buffer, len);
503 bt_cb(skb)->expect -= len;
505 if (skb->len == HCI_ACL_HDR_SIZE) {
506 __le16 dlen = hci_acl_hdr(skb)->dlen;
508 /* Complete ACL header */
509 bt_cb(skb)->expect = __le16_to_cpu(dlen);
511 if (skb_tailroom(skb) < bt_cb(skb)->expect) {
520 if (bt_cb(skb)->expect == 0) {
522 hci_recv_frame(data->hdev, skb);
528 spin_unlock(&data->rxlock);
533 static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
538 spin_lock(&data->rxlock);
545 skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
551 bt_cb(skb)->pkt_type = HCI_SCODATA_PKT;
552 bt_cb(skb)->expect = HCI_SCO_HDR_SIZE;
555 len = min_t(uint, bt_cb(skb)->expect, count);
556 memcpy(skb_put(skb, len), buffer, len);
560 bt_cb(skb)->expect -= len;
562 if (skb->len == HCI_SCO_HDR_SIZE) {
563 /* Complete SCO header */
564 bt_cb(skb)->expect = hci_sco_hdr(skb)->dlen;
566 if (skb_tailroom(skb) < bt_cb(skb)->expect) {
575 if (bt_cb(skb)->expect == 0) {
577 hci_recv_frame(data->hdev, skb);
583 spin_unlock(&data->rxlock);
588 static void btusb_intr_complete(struct urb *urb)
590 struct hci_dev *hdev = urb->context;
591 struct btusb_data *data = hci_get_drvdata(hdev);
594 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
597 if (!test_bit(HCI_RUNNING, &hdev->flags))
600 if (urb->status == 0) {
601 hdev->stat.byte_rx += urb->actual_length;
603 if (btusb_recv_intr(data, urb->transfer_buffer,
604 urb->actual_length) < 0) {
605 BT_ERR("%s corrupted event packet", hdev->name);
608 } else if (urb->status == -ENOENT) {
609 /* Avoid suspend failed when usb_kill_urb */
613 if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
616 usb_mark_last_busy(data->udev);
617 usb_anchor_urb(urb, &data->intr_anchor);
619 err = usb_submit_urb(urb, GFP_ATOMIC);
621 /* -EPERM: urb is being killed;
622 * -ENODEV: device got disconnected */
623 if (err != -EPERM && err != -ENODEV)
624 BT_ERR("%s urb %p failed to resubmit (%d)",
625 hdev->name, urb, -err);
626 usb_unanchor_urb(urb);
630 static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
632 struct btusb_data *data = hci_get_drvdata(hdev);
638 BT_DBG("%s", hdev->name);
643 urb = usb_alloc_urb(0, mem_flags);
647 size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
649 buf = kmalloc(size, mem_flags);
655 pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
657 usb_fill_int_urb(urb, data->udev, pipe, buf, size,
658 btusb_intr_complete, hdev, data->intr_ep->bInterval);
660 urb->transfer_flags |= URB_FREE_BUFFER;
662 usb_anchor_urb(urb, &data->intr_anchor);
664 err = usb_submit_urb(urb, mem_flags);
666 if (err != -EPERM && err != -ENODEV)
667 BT_ERR("%s urb %p submission failed (%d)",
668 hdev->name, urb, -err);
669 usb_unanchor_urb(urb);
677 static void btusb_bulk_complete(struct urb *urb)
679 struct hci_dev *hdev = urb->context;
680 struct btusb_data *data = hci_get_drvdata(hdev);
683 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
686 if (!test_bit(HCI_RUNNING, &hdev->flags))
689 if (urb->status == 0) {
690 hdev->stat.byte_rx += urb->actual_length;
692 if (data->recv_bulk(data, urb->transfer_buffer,
693 urb->actual_length) < 0) {
694 BT_ERR("%s corrupted ACL packet", hdev->name);
697 } else if (urb->status == -ENOENT) {
698 /* Avoid suspend failed when usb_kill_urb */
702 if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
705 usb_anchor_urb(urb, &data->bulk_anchor);
706 usb_mark_last_busy(data->udev);
708 err = usb_submit_urb(urb, GFP_ATOMIC);
710 /* -EPERM: urb is being killed;
711 * -ENODEV: device got disconnected */
712 if (err != -EPERM && err != -ENODEV)
713 BT_ERR("%s urb %p failed to resubmit (%d)",
714 hdev->name, urb, -err);
715 usb_unanchor_urb(urb);
719 static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
721 struct btusb_data *data = hci_get_drvdata(hdev);
725 int err, size = HCI_MAX_FRAME_SIZE;
727 BT_DBG("%s", hdev->name);
729 if (!data->bulk_rx_ep)
732 urb = usb_alloc_urb(0, mem_flags);
736 buf = kmalloc(size, mem_flags);
742 pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
744 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
745 btusb_bulk_complete, hdev);
747 urb->transfer_flags |= URB_FREE_BUFFER;
749 usb_mark_last_busy(data->udev);
750 usb_anchor_urb(urb, &data->bulk_anchor);
752 err = usb_submit_urb(urb, mem_flags);
754 if (err != -EPERM && err != -ENODEV)
755 BT_ERR("%s urb %p submission failed (%d)",
756 hdev->name, urb, -err);
757 usb_unanchor_urb(urb);
765 static void btusb_isoc_complete(struct urb *urb)
767 struct hci_dev *hdev = urb->context;
768 struct btusb_data *data = hci_get_drvdata(hdev);
771 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
774 if (!test_bit(HCI_RUNNING, &hdev->flags))
777 if (urb->status == 0) {
778 for (i = 0; i < urb->number_of_packets; i++) {
779 unsigned int offset = urb->iso_frame_desc[i].offset;
780 unsigned int length = urb->iso_frame_desc[i].actual_length;
782 if (urb->iso_frame_desc[i].status)
785 hdev->stat.byte_rx += length;
787 if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
789 BT_ERR("%s corrupted SCO packet", hdev->name);
793 } else if (urb->status == -ENOENT) {
794 /* Avoid suspend failed when usb_kill_urb */
798 if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
801 usb_anchor_urb(urb, &data->isoc_anchor);
803 err = usb_submit_urb(urb, GFP_ATOMIC);
805 /* -EPERM: urb is being killed;
806 * -ENODEV: device got disconnected */
807 if (err != -EPERM && err != -ENODEV)
808 BT_ERR("%s urb %p failed to resubmit (%d)",
809 hdev->name, urb, -err);
810 usb_unanchor_urb(urb);
814 static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
818 BT_DBG("len %d mtu %d", len, mtu);
820 for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
821 i++, offset += mtu, len -= mtu) {
822 urb->iso_frame_desc[i].offset = offset;
823 urb->iso_frame_desc[i].length = mtu;
826 if (len && i < BTUSB_MAX_ISOC_FRAMES) {
827 urb->iso_frame_desc[i].offset = offset;
828 urb->iso_frame_desc[i].length = len;
832 urb->number_of_packets = i;
835 static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
837 struct btusb_data *data = hci_get_drvdata(hdev);
843 BT_DBG("%s", hdev->name);
845 if (!data->isoc_rx_ep)
848 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
852 size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
853 BTUSB_MAX_ISOC_FRAMES;
855 buf = kmalloc(size, mem_flags);
861 pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
863 usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
864 hdev, data->isoc_rx_ep->bInterval);
866 urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
868 __fill_isoc_descriptor(urb, size,
869 le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
871 usb_anchor_urb(urb, &data->isoc_anchor);
873 err = usb_submit_urb(urb, mem_flags);
875 if (err != -EPERM && err != -ENODEV)
876 BT_ERR("%s urb %p submission failed (%d)",
877 hdev->name, urb, -err);
878 usb_unanchor_urb(urb);
886 static void btusb_diag_complete(struct urb *urb)
888 struct hci_dev *hdev = urb->context;
889 struct btusb_data *data = hci_get_drvdata(hdev);
892 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
895 if (urb->status == 0) {
898 skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
900 memcpy(skb_put(skb, urb->actual_length),
901 urb->transfer_buffer, urb->actual_length);
902 hci_recv_diag(hdev, skb);
904 } else if (urb->status == -ENOENT) {
905 /* Avoid suspend failed when usb_kill_urb */
909 if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
912 usb_anchor_urb(urb, &data->diag_anchor);
913 usb_mark_last_busy(data->udev);
915 err = usb_submit_urb(urb, GFP_ATOMIC);
917 /* -EPERM: urb is being killed;
918 * -ENODEV: device got disconnected */
919 if (err != -EPERM && err != -ENODEV)
920 BT_ERR("%s urb %p failed to resubmit (%d)",
921 hdev->name, urb, -err);
922 usb_unanchor_urb(urb);
926 static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
928 struct btusb_data *data = hci_get_drvdata(hdev);
932 int err, size = HCI_MAX_FRAME_SIZE;
934 BT_DBG("%s", hdev->name);
936 if (!data->diag_rx_ep)
939 urb = usb_alloc_urb(0, mem_flags);
943 buf = kmalloc(size, mem_flags);
949 pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);
951 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
952 btusb_diag_complete, hdev);
954 urb->transfer_flags |= URB_FREE_BUFFER;
956 usb_mark_last_busy(data->udev);
957 usb_anchor_urb(urb, &data->diag_anchor);
959 err = usb_submit_urb(urb, mem_flags);
961 if (err != -EPERM && err != -ENODEV)
962 BT_ERR("%s urb %p submission failed (%d)",
963 hdev->name, urb, -err);
964 usb_unanchor_urb(urb);
972 static void btusb_tx_complete(struct urb *urb)
974 struct sk_buff *skb = urb->context;
975 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
976 struct btusb_data *data = hci_get_drvdata(hdev);
978 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
981 if (!test_bit(HCI_RUNNING, &hdev->flags))
985 hdev->stat.byte_tx += urb->transfer_buffer_length;
990 spin_lock(&data->txlock);
991 data->tx_in_flight--;
992 spin_unlock(&data->txlock);
994 kfree(urb->setup_packet);
999 static void btusb_isoc_tx_complete(struct urb *urb)
1001 struct sk_buff *skb = urb->context;
1002 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1004 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1005 urb->actual_length);
1007 if (!test_bit(HCI_RUNNING, &hdev->flags))
1011 hdev->stat.byte_tx += urb->transfer_buffer_length;
1013 hdev->stat.err_tx++;
1016 kfree(urb->setup_packet);
1021 static int btusb_open(struct hci_dev *hdev)
1023 struct btusb_data *data = hci_get_drvdata(hdev);
1026 BT_DBG("%s", hdev->name);
1028 /* Patching USB firmware files prior to starting any URBs of HCI path
1029 * It is more safe to use USB bulk channel for downloading USB patch
1031 if (data->setup_on_usb) {
1032 err = data->setup_on_usb(hdev);
1037 err = usb_autopm_get_interface(data->intf);
1041 data->intf->needs_remote_wakeup = 1;
1043 if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
1046 err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
1050 err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1052 usb_kill_anchored_urbs(&data->intr_anchor);
1056 set_bit(BTUSB_BULK_RUNNING, &data->flags);
1057 btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1060 if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
1061 set_bit(BTUSB_DIAG_RUNNING, &data->flags);
1065 usb_autopm_put_interface(data->intf);
1069 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1070 usb_autopm_put_interface(data->intf);
1074 static void btusb_stop_traffic(struct btusb_data *data)
1076 usb_kill_anchored_urbs(&data->intr_anchor);
1077 usb_kill_anchored_urbs(&data->bulk_anchor);
1078 usb_kill_anchored_urbs(&data->isoc_anchor);
1079 usb_kill_anchored_urbs(&data->diag_anchor);
1082 static int btusb_close(struct hci_dev *hdev)
1084 struct btusb_data *data = hci_get_drvdata(hdev);
1087 BT_DBG("%s", hdev->name);
1089 cancel_work_sync(&data->work);
1090 cancel_work_sync(&data->waker);
1092 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1093 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
1094 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1095 clear_bit(BTUSB_DIAG_RUNNING, &data->flags);
1097 btusb_stop_traffic(data);
1098 btusb_free_frags(data);
1100 err = usb_autopm_get_interface(data->intf);
1104 data->intf->needs_remote_wakeup = 0;
1105 usb_autopm_put_interface(data->intf);
1108 usb_scuttle_anchored_urbs(&data->deferred);
1112 static int btusb_flush(struct hci_dev *hdev)
1114 struct btusb_data *data = hci_get_drvdata(hdev);
1116 BT_DBG("%s", hdev->name);
1118 usb_kill_anchored_urbs(&data->tx_anchor);
1119 btusb_free_frags(data);
1124 static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
1126 struct btusb_data *data = hci_get_drvdata(hdev);
1127 struct usb_ctrlrequest *dr;
1131 urb = usb_alloc_urb(0, GFP_KERNEL);
1133 return ERR_PTR(-ENOMEM);
1135 dr = kmalloc(sizeof(*dr), GFP_KERNEL);
1138 return ERR_PTR(-ENOMEM);
1141 dr->bRequestType = data->cmdreq_type;
1142 dr->bRequest = data->cmdreq;
1145 dr->wLength = __cpu_to_le16(skb->len);
1147 pipe = usb_sndctrlpipe(data->udev, 0x00);
1149 usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
1150 skb->data, skb->len, btusb_tx_complete, skb);
1152 skb->dev = (void *)hdev;
1157 static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
1159 struct btusb_data *data = hci_get_drvdata(hdev);
1163 if (!data->bulk_tx_ep)
1164 return ERR_PTR(-ENODEV);
1166 urb = usb_alloc_urb(0, GFP_KERNEL);
1168 return ERR_PTR(-ENOMEM);
1170 pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
1172 usb_fill_bulk_urb(urb, data->udev, pipe,
1173 skb->data, skb->len, btusb_tx_complete, skb);
1175 skb->dev = (void *)hdev;
1180 static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
1182 struct btusb_data *data = hci_get_drvdata(hdev);
1186 if (!data->isoc_tx_ep)
1187 return ERR_PTR(-ENODEV);
1189 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
1191 return ERR_PTR(-ENOMEM);
1193 pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
1195 usb_fill_int_urb(urb, data->udev, pipe,
1196 skb->data, skb->len, btusb_isoc_tx_complete,
1197 skb, data->isoc_tx_ep->bInterval);
1199 urb->transfer_flags = URB_ISO_ASAP;
1201 __fill_isoc_descriptor(urb, skb->len,
1202 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
1204 skb->dev = (void *)hdev;
1209 static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
1211 struct btusb_data *data = hci_get_drvdata(hdev);
1214 usb_anchor_urb(urb, &data->tx_anchor);
1216 err = usb_submit_urb(urb, GFP_KERNEL);
1218 if (err != -EPERM && err != -ENODEV)
1219 BT_ERR("%s urb %p submission failed (%d)",
1220 hdev->name, urb, -err);
1221 kfree(urb->setup_packet);
1222 usb_unanchor_urb(urb);
1224 usb_mark_last_busy(data->udev);
1231 static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
1233 struct btusb_data *data = hci_get_drvdata(hdev);
1234 unsigned long flags;
1237 spin_lock_irqsave(&data->txlock, flags);
1238 suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
1240 data->tx_in_flight++;
1241 spin_unlock_irqrestore(&data->txlock, flags);
1244 return submit_tx_urb(hdev, urb);
1246 usb_anchor_urb(urb, &data->deferred);
1247 schedule_work(&data->waker);
1253 static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
1257 BT_DBG("%s", hdev->name);
1259 switch (bt_cb(skb)->pkt_type) {
1260 case HCI_COMMAND_PKT:
1261 urb = alloc_ctrl_urb(hdev, skb);
1263 return PTR_ERR(urb);
1265 hdev->stat.cmd_tx++;
1266 return submit_or_queue_tx_urb(hdev, urb);
1268 case HCI_ACLDATA_PKT:
1269 urb = alloc_bulk_urb(hdev, skb);
1271 return PTR_ERR(urb);
1273 hdev->stat.acl_tx++;
1274 return submit_or_queue_tx_urb(hdev, urb);
1276 case HCI_SCODATA_PKT:
1277 if (hci_conn_num(hdev, SCO_LINK) < 1)
1280 urb = alloc_isoc_urb(hdev, skb);
1282 return PTR_ERR(urb);
1284 hdev->stat.sco_tx++;
1285 return submit_tx_urb(hdev, urb);
1291 static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
1293 struct btusb_data *data = hci_get_drvdata(hdev);
1295 BT_DBG("%s evt %d", hdev->name, evt);
1297 if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
1298 data->sco_num = hci_conn_num(hdev, SCO_LINK);
1299 schedule_work(&data->work);
1303 static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
1305 struct btusb_data *data = hci_get_drvdata(hdev);
1306 struct usb_interface *intf = data->isoc;
1307 struct usb_endpoint_descriptor *ep_desc;
1313 err = usb_set_interface(data->udev, 1, altsetting);
1315 BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
1319 data->isoc_altsetting = altsetting;
1321 data->isoc_tx_ep = NULL;
1322 data->isoc_rx_ep = NULL;
1324 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
1325 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
1327 if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
1328 data->isoc_tx_ep = ep_desc;
1332 if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
1333 data->isoc_rx_ep = ep_desc;
1338 if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
1339 BT_ERR("%s invalid SCO descriptors", hdev->name);
1346 static void btusb_work(struct work_struct *work)
1348 struct btusb_data *data = container_of(work, struct btusb_data, work);
1349 struct hci_dev *hdev = data->hdev;
1353 if (data->sco_num > 0) {
1354 if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
1355 err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
1357 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1358 usb_kill_anchored_urbs(&data->isoc_anchor);
1362 set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
1365 if (hdev->voice_setting & 0x0020) {
1366 static const int alts[3] = { 2, 4, 5 };
1368 new_alts = alts[data->sco_num - 1];
1370 new_alts = data->sco_num;
1373 if (data->isoc_altsetting != new_alts) {
1374 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1375 usb_kill_anchored_urbs(&data->isoc_anchor);
1377 /* When isochronous alternate setting needs to be
1378 * changed, because SCO connection has been added
1379 * or removed, a packet fragment may be left in the
1380 * reassembling state. This could lead to wrongly
1381 * assembled fragments.
1383 * Clear outstanding fragment when selecting a new
1384 * alternate setting.
1386 spin_lock(&data->rxlock);
1387 kfree_skb(data->sco_skb);
1388 data->sco_skb = NULL;
1389 spin_unlock(&data->rxlock);
1391 if (__set_isoc_interface(hdev, new_alts) < 0)
1395 if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
1396 if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
1397 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1399 btusb_submit_isoc_urb(hdev, GFP_KERNEL);
1402 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1403 usb_kill_anchored_urbs(&data->isoc_anchor);
1405 __set_isoc_interface(hdev, 0);
1406 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
1407 usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
1411 static void btusb_waker(struct work_struct *work)
1413 struct btusb_data *data = container_of(work, struct btusb_data, waker);
1416 err = usb_autopm_get_interface(data->intf);
1420 usb_autopm_put_interface(data->intf);
1423 static int btusb_setup_bcm92035(struct hci_dev *hdev)
1425 struct sk_buff *skb;
1428 BT_DBG("%s", hdev->name);
1430 skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
1432 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
1439 static int btusb_setup_csr(struct hci_dev *hdev)
1441 struct hci_rp_read_local_version *rp;
1442 struct sk_buff *skb;
1444 BT_DBG("%s", hdev->name);
1446 skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
1449 int err = PTR_ERR(skb);
1450 BT_ERR("%s: CSR: Local version failed (%d)", hdev->name, err);
1454 if (skb->len != sizeof(struct hci_rp_read_local_version)) {
1455 BT_ERR("%s: CSR: Local version length mismatch", hdev->name);
1460 rp = (struct hci_rp_read_local_version *)skb->data;
1462 /* Detect controllers which aren't real CSR ones. */
1463 if (le16_to_cpu(rp->manufacturer) != 10 ||
1464 le16_to_cpu(rp->lmp_subver) == 0x0c5c) {
1465 /* Clear the reset quirk since this is not an actual
1466 * early Bluetooth 1.1 device from CSR.
1468 clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
1470 /* These fake CSR controllers have all a broken
1471 * stored link key handling and so just disable it.
1473 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
1481 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
1482 struct intel_version *ver)
1484 const struct firmware *fw;
1488 snprintf(fwname, sizeof(fwname),
1489 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1490 ver->hw_platform, ver->hw_variant, ver->hw_revision,
1491 ver->fw_variant, ver->fw_revision, ver->fw_build_num,
1492 ver->fw_build_ww, ver->fw_build_yy);
1494 ret = request_firmware(&fw, fwname, &hdev->dev);
1496 if (ret == -EINVAL) {
1497 BT_ERR("%s Intel firmware file request failed (%d)",
1502 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1503 hdev->name, fwname, ret);
1505 /* If the correct firmware patch file is not found, use the
1506 * default firmware patch file instead
1508 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
1509 ver->hw_platform, ver->hw_variant);
1510 if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
1511 BT_ERR("%s failed to open default Intel fw file: %s",
1512 hdev->name, fwname);
1517 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);
1522 static int btusb_setup_intel_patching(struct hci_dev *hdev,
1523 const struct firmware *fw,
1524 const u8 **fw_ptr, int *disable_patch)
1526 struct sk_buff *skb;
1527 struct hci_command_hdr *cmd;
1528 const u8 *cmd_param;
1529 struct hci_event_hdr *evt = NULL;
1530 const u8 *evt_param = NULL;
1531 int remain = fw->size - (*fw_ptr - fw->data);
1533 /* The first byte indicates the types of the patch command or event.
1534 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1535 * in the current firmware buffer doesn't start with 0x01 or
1536 * the size of remain buffer is smaller than HCI command header,
1537 * the firmware file is corrupted and it should stop the patching
1540 if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
1541 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
1547 cmd = (struct hci_command_hdr *)(*fw_ptr);
1548 *fw_ptr += sizeof(*cmd);
1549 remain -= sizeof(*cmd);
1551 /* Ensure that the remain firmware data is long enough than the length
1552 * of command parameter. If not, the firmware file is corrupted.
1554 if (remain < cmd->plen) {
1555 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
1559 /* If there is a command that loads a patch in the firmware
1560 * file, then enable the patch upon success, otherwise just
1561 * disable the manufacturer mode, for example patch activation
1562 * is not required when the default firmware patch file is used
1563 * because there are no patch data to load.
1565 if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
1568 cmd_param = *fw_ptr;
1569 *fw_ptr += cmd->plen;
1570 remain -= cmd->plen;
1572 /* This reads the expected events when the above command is sent to the
1573 * device. Some vendor commands expects more than one events, for
1574 * example command status event followed by vendor specific event.
1575 * For this case, it only keeps the last expected event. so the command
1576 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1577 * last expected event.
1579 while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
1583 evt = (struct hci_event_hdr *)(*fw_ptr);
1584 *fw_ptr += sizeof(*evt);
1585 remain -= sizeof(*evt);
1587 if (remain < evt->plen) {
1588 BT_ERR("%s Intel fw corrupted: invalid evt len",
1593 evt_param = *fw_ptr;
1594 *fw_ptr += evt->plen;
1595 remain -= evt->plen;
1598 /* Every HCI commands in the firmware file has its correspond event.
1599 * If event is not found or remain is smaller than zero, the firmware
1600 * file is corrupted.
1602 if (!evt || !evt_param || remain < 0) {
1603 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
1607 skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
1608 cmd_param, evt->evt, HCI_INIT_TIMEOUT);
1610 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1611 hdev->name, cmd->opcode, PTR_ERR(skb));
1612 return PTR_ERR(skb);
1615 /* It ensures that the returned event matches the event data read from
1616 * the firmware file. At fist, it checks the length and then
1617 * the contents of the event.
1619 if (skb->len != evt->plen) {
1620 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
1621 le16_to_cpu(cmd->opcode));
1626 if (memcmp(skb->data, evt_param, evt->plen)) {
1627 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1628 hdev->name, le16_to_cpu(cmd->opcode));
1637 static int btusb_setup_intel(struct hci_dev *hdev)
1639 struct sk_buff *skb;
1640 const struct firmware *fw;
1643 struct intel_version *ver;
1645 const u8 mfg_enable[] = { 0x01, 0x00 };
1646 const u8 mfg_disable[] = { 0x00, 0x00 };
1647 const u8 mfg_reset_deactivate[] = { 0x00, 0x01 };
1648 const u8 mfg_reset_activate[] = { 0x00, 0x02 };
1650 BT_DBG("%s", hdev->name);
1652 /* The controller has a bug with the first HCI command sent to it
1653 * returning number of completed commands as zero. This would stall the
1654 * command processing in the Bluetooth core.
1656 * As a workaround, send HCI Reset command first which will reset the
1657 * number of completed commands and allow normal command processing
1660 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
1662 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1663 hdev->name, PTR_ERR(skb));
1664 return PTR_ERR(skb);
1668 /* Read Intel specific controller version first to allow selection of
1669 * which firmware file to load.
1671 * The returned information are hardware variant and revision plus
1672 * firmware variant, revision and build number.
1674 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
1676 BT_ERR("%s reading Intel fw version command failed (%ld)",
1677 hdev->name, PTR_ERR(skb));
1678 return PTR_ERR(skb);
1681 if (skb->len != sizeof(*ver)) {
1682 BT_ERR("%s Intel version event length mismatch", hdev->name);
1687 ver = (struct intel_version *)skb->data;
1689 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1690 hdev->name, ver->hw_platform, ver->hw_variant,
1691 ver->hw_revision, ver->fw_variant, ver->fw_revision,
1692 ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy,
1695 /* fw_patch_num indicates the version of patch the device currently
1696 * have. If there is no patch data in the device, it is always 0x00.
1697 * So, if it is other than 0x00, no need to patch the device again.
1699 if (ver->fw_patch_num) {
1700 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1701 hdev->name, ver->fw_patch_num);
1703 btintel_check_bdaddr(hdev);
1707 /* Opens the firmware patch file based on the firmware version read
1708 * from the controller. If it fails to open the matching firmware
1709 * patch file, it tries to open the default firmware patch file.
1710 * If no patch file is found, allow the device to operate without
1713 fw = btusb_setup_intel_get_fw(hdev, ver);
1716 btintel_check_bdaddr(hdev);
1723 /* This Intel specific command enables the manufacturer mode of the
1726 * Only while this mode is enabled, the driver can download the
1727 * firmware patch data and configuration parameters.
1729 skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT);
1731 BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
1732 hdev->name, PTR_ERR(skb));
1733 release_firmware(fw);
1734 return PTR_ERR(skb);
1741 /* The firmware data file consists of list of Intel specific HCI
1742 * commands and its expected events. The first byte indicates the
1743 * type of the message, either HCI command or HCI event.
1745 * It reads the command and its expected event from the firmware file,
1746 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1747 * the returned event is compared with the event read from the firmware
1748 * file and it will continue until all the messages are downloaded to
1751 * Once the firmware patching is completed successfully,
1752 * the manufacturer mode is disabled with reset and activating the
1755 * If the firmware patching fails, the manufacturer mode is
1756 * disabled with reset and deactivating the patch.
1758 * If the default patch file is used, no reset is done when disabling
1761 while (fw->size > fw_ptr - fw->data) {
1764 ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
1767 goto exit_mfg_deactivate;
1770 release_firmware(fw);
1773 goto exit_mfg_disable;
1775 /* Patching completed successfully and disable the manufacturer mode
1776 * with reset and activate the downloaded firmware patches.
1778 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate),
1779 mfg_reset_activate, HCI_INIT_TIMEOUT);
1781 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1782 hdev->name, PTR_ERR(skb));
1783 return PTR_ERR(skb);
1787 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
1790 btintel_check_bdaddr(hdev);
1794 /* Disable the manufacturer mode without reset */
1795 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable,
1798 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1799 hdev->name, PTR_ERR(skb));
1800 return PTR_ERR(skb);
1804 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
1806 btintel_check_bdaddr(hdev);
1809 exit_mfg_deactivate:
1810 release_firmware(fw);
1812 /* Patching failed. Disable the manufacturer mode with reset and
1813 * deactivate the downloaded firmware patches.
1815 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate),
1816 mfg_reset_deactivate, HCI_INIT_TIMEOUT);
1818 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1819 hdev->name, PTR_ERR(skb));
1820 return PTR_ERR(skb);
1824 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
1827 btintel_check_bdaddr(hdev);
1831 static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
1833 struct sk_buff *skb;
1834 struct hci_event_hdr *hdr;
1835 struct hci_ev_cmd_complete *evt;
1837 skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
1841 hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
1842 hdr->evt = HCI_EV_CMD_COMPLETE;
1843 hdr->plen = sizeof(*evt) + 1;
1845 evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
1847 evt->opcode = cpu_to_le16(opcode);
1849 *skb_put(skb, 1) = 0x00;
1851 bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
1853 return hci_recv_frame(hdev, skb);
1856 static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
1859 /* When the device is in bootloader mode, then it can send
1860 * events via the bulk endpoint. These events are treated the
1861 * same way as the ones received from the interrupt endpoint.
1863 if (test_bit(BTUSB_BOOTLOADER, &data->flags))
1864 return btusb_recv_intr(data, buffer, count);
1866 return btusb_recv_bulk(data, buffer, count);
1869 static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
1872 const struct intel_bootup *evt = ptr;
1874 if (len != sizeof(*evt))
1877 if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
1878 smp_mb__after_atomic();
1879 wake_up_bit(&data->flags, BTUSB_BOOTING);
1883 static void btusb_intel_secure_send_result(struct btusb_data *data,
1884 const void *ptr, unsigned int len)
1886 const struct intel_secure_send_result *evt = ptr;
1888 if (len != sizeof(*evt))
1892 set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
1894 if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
1895 test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
1896 smp_mb__after_atomic();
1897 wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
1901 static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
1903 struct btusb_data *data = hci_get_drvdata(hdev);
1905 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
1906 struct hci_event_hdr *hdr = (void *)skb->data;
1908 if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
1910 const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
1911 unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
1913 switch (skb->data[2]) {
1915 /* When switching to the operational firmware
1916 * the device sends a vendor specific event
1917 * indicating that the bootup completed.
1919 btusb_intel_bootup(data, ptr, len);
1922 /* When the firmware loading completes the
1923 * device sends out a vendor specific event
1924 * indicating the result of the firmware
1927 btusb_intel_secure_send_result(data, ptr, len);
1933 return hci_recv_frame(hdev, skb);
1936 static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
1938 struct btusb_data *data = hci_get_drvdata(hdev);
1941 BT_DBG("%s", hdev->name);
1943 switch (bt_cb(skb)->pkt_type) {
1944 case HCI_COMMAND_PKT:
1945 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
1946 struct hci_command_hdr *cmd = (void *)skb->data;
1947 __u16 opcode = le16_to_cpu(cmd->opcode);
1949 /* When in bootloader mode and the command 0xfc09
1950 * is received, it needs to be send down the
1951 * bulk endpoint. So allocate a bulk URB instead.
1953 if (opcode == 0xfc09)
1954 urb = alloc_bulk_urb(hdev, skb);
1956 urb = alloc_ctrl_urb(hdev, skb);
1958 /* When the 0xfc01 command is issued to boot into
1959 * the operational firmware, it will actually not
1960 * send a command complete event. To keep the flow
1961 * control working inject that event here.
1963 if (opcode == 0xfc01)
1964 inject_cmd_complete(hdev, opcode);
1966 urb = alloc_ctrl_urb(hdev, skb);
1969 return PTR_ERR(urb);
1971 hdev->stat.cmd_tx++;
1972 return submit_or_queue_tx_urb(hdev, urb);
1974 case HCI_ACLDATA_PKT:
1975 urb = alloc_bulk_urb(hdev, skb);
1977 return PTR_ERR(urb);
1979 hdev->stat.acl_tx++;
1980 return submit_or_queue_tx_urb(hdev, urb);
1982 case HCI_SCODATA_PKT:
1983 if (hci_conn_num(hdev, SCO_LINK) < 1)
1986 urb = alloc_isoc_urb(hdev, skb);
1988 return PTR_ERR(urb);
1990 hdev->stat.sco_tx++;
1991 return submit_tx_urb(hdev, urb);
1997 static int btusb_setup_intel_new(struct hci_dev *hdev)
1999 static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
2000 0x00, 0x08, 0x04, 0x00 };
2001 struct btusb_data *data = hci_get_drvdata(hdev);
2002 struct sk_buff *skb;
2003 struct intel_version *ver;
2004 struct intel_boot_params *params;
2005 const struct firmware *fw;
2009 ktime_t calltime, delta, rettime;
2010 unsigned long long duration;
2013 BT_DBG("%s", hdev->name);
2015 calltime = ktime_get();
2017 /* Read the Intel version information to determine if the device
2018 * is in bootloader mode or if it already has operational firmware
2021 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
2023 BT_ERR("%s: Reading Intel version information failed (%ld)",
2024 hdev->name, PTR_ERR(skb));
2025 return PTR_ERR(skb);
2028 if (skb->len != sizeof(*ver)) {
2029 BT_ERR("%s: Intel version event size mismatch", hdev->name);
2034 ver = (struct intel_version *)skb->data;
2036 /* The hardware platform number has a fixed value of 0x37 and
2037 * for now only accept this single value.
2039 if (ver->hw_platform != 0x37) {
2040 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2041 hdev->name, ver->hw_platform);
2046 /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
2047 * supported by this firmware loading method. This check has been
2048 * put in place to ensure correct forward compatibility options
2049 * when newer hardware variants come along.
2051 if (ver->hw_variant != 0x0b) {
2052 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2053 hdev->name, ver->hw_variant);
2058 btintel_version_info(hdev, ver);
2060 /* The firmware variant determines if the device is in bootloader
2061 * mode or is running operational firmware. The value 0x06 identifies
2062 * the bootloader and the value 0x23 identifies the operational
2065 * When the operational firmware is already present, then only
2066 * the check for valid Bluetooth device address is needed. This
2067 * determines if the device will be added as configured or
2068 * unconfigured controller.
2070 * It is not possible to use the Secure Boot Parameters in this
2071 * case since that command is only available in bootloader mode.
2073 if (ver->fw_variant == 0x23) {
2075 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2076 btintel_check_bdaddr(hdev);
2080 /* If the device is not in bootloader mode, then the only possible
2081 * choice is to return an error and abort the device initialization.
2083 if (ver->fw_variant != 0x06) {
2084 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2085 hdev->name, ver->fw_variant);
2092 /* Read the secure boot parameters to identify the operating
2093 * details of the bootloader.
2095 skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
2097 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2098 hdev->name, PTR_ERR(skb));
2099 return PTR_ERR(skb);
2102 if (skb->len != sizeof(*params)) {
2103 BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
2108 params = (struct intel_boot_params *)skb->data;
2110 BT_INFO("%s: Device revision is %u", hdev->name,
2111 le16_to_cpu(params->dev_revid));
2113 BT_INFO("%s: Secure boot is %s", hdev->name,
2114 params->secure_boot ? "enabled" : "disabled");
2116 BT_INFO("%s: OTP lock is %s", hdev->name,
2117 params->otp_lock ? "enabled" : "disabled");
2119 BT_INFO("%s: API lock is %s", hdev->name,
2120 params->api_lock ? "enabled" : "disabled");
2122 BT_INFO("%s: Debug lock is %s", hdev->name,
2123 params->debug_lock ? "enabled" : "disabled");
2125 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
2126 params->min_fw_build_nn, params->min_fw_build_cw,
2127 2000 + params->min_fw_build_yy);
2129 /* It is required that every single firmware fragment is acknowledged
2130 * with a command complete event. If the boot parameters indicate
2131 * that this bootloader does not send them, then abort the setup.
2133 if (params->limited_cce != 0x00) {
2134 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2135 hdev->name, params->limited_cce);
2140 /* If the OTP has no valid Bluetooth device address, then there will
2141 * also be no valid address for the operational firmware.
2143 if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
2144 BT_INFO("%s: No device address configured", hdev->name);
2145 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2148 /* With this Intel bootloader only the hardware variant and device
2149 * revision information are used to select the right firmware.
2151 * Currently this bootloader support is limited to hardware variant
2152 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
2154 snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
2155 le16_to_cpu(params->dev_revid));
2157 err = request_firmware(&fw, fwname, &hdev->dev);
2159 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2165 BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
2167 /* Save the DDC file name for later use to apply once the firmware
2168 * downloading is done.
2170 snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
2171 le16_to_cpu(params->dev_revid));
2175 if (fw->size < 644) {
2176 BT_ERR("%s: Invalid size of firmware file (%zu)",
2177 hdev->name, fw->size);
2182 set_bit(BTUSB_DOWNLOADING, &data->flags);
2184 /* Start the firmware download transaction with the Init fragment
2185 * represented by the 128 bytes of CSS header.
2187 err = btintel_secure_send(hdev, 0x00, 128, fw->data);
2189 BT_ERR("%s: Failed to send firmware header (%d)",
2194 /* Send the 256 bytes of public key information from the firmware
2195 * as the PKey fragment.
2197 err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
2199 BT_ERR("%s: Failed to send firmware public key (%d)",
2204 /* Send the 256 bytes of signature information from the firmware
2205 * as the Sign fragment.
2207 err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
2209 BT_ERR("%s: Failed to send firmware signature (%d)",
2214 fw_ptr = fw->data + 644;
2217 while (fw_ptr - fw->data < fw->size) {
2218 struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
2220 frag_len += sizeof(*cmd) + cmd->plen;
2222 /* The parameter length of the secure send command requires
2223 * a 4 byte alignment. It happens so that the firmware file
2224 * contains proper Intel_NOP commands to align the fragments
2227 * Send set of commands with 4 byte alignment from the
2228 * firmware data buffer as a single Data fragement.
2230 if (!(frag_len % 4)) {
2231 err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
2233 BT_ERR("%s: Failed to send firmware data (%d)",
2243 set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
2245 BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
2247 /* Before switching the device into operational mode and with that
2248 * booting the loaded firmware, wait for the bootloader notification
2249 * that all fragments have been successfully received.
2251 * When the event processing receives the notification, then the
2252 * BTUSB_DOWNLOADING flag will be cleared.
2254 * The firmware loading should not take longer than 5 seconds
2255 * and thus just timeout if that happens and fail the setup
2258 err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
2260 msecs_to_jiffies(5000));
2262 BT_ERR("%s: Firmware loading interrupted", hdev->name);
2268 BT_ERR("%s: Firmware loading timeout", hdev->name);
2273 if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
2274 BT_ERR("%s: Firmware loading failed", hdev->name);
2279 rettime = ktime_get();
2280 delta = ktime_sub(rettime, calltime);
2281 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2283 BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
2286 release_firmware(fw);
2291 calltime = ktime_get();
2293 set_bit(BTUSB_BOOTING, &data->flags);
2295 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
2298 return PTR_ERR(skb);
2302 /* The bootloader will not indicate when the device is ready. This
2303 * is done by the operational firmware sending bootup notification.
2305 * Booting into operational firmware should not take longer than
2306 * 1 second. However if that happens, then just fail the setup
2307 * since something went wrong.
2309 BT_INFO("%s: Waiting for device to boot", hdev->name);
2311 err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
2313 msecs_to_jiffies(1000));
2316 BT_ERR("%s: Device boot interrupted", hdev->name);
2321 BT_ERR("%s: Device boot timeout", hdev->name);
2325 rettime = ktime_get();
2326 delta = ktime_sub(rettime, calltime);
2327 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2329 BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
2331 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2333 /* Once the device is running in operational mode, it needs to apply
2334 * the device configuration (DDC) parameters.
2336 * The device can work without DDC parameters, so even if it fails
2337 * to load the file, no need to fail the setup.
2339 btintel_load_ddc_config(hdev, fwname);
2344 static int btusb_shutdown_intel(struct hci_dev *hdev)
2346 struct sk_buff *skb;
2349 /* Some platforms have an issue with BT LED when the interface is
2350 * down or BT radio is turned off, which takes 5 seconds to BT LED
2351 * goes off. This command turns off the BT LED immediately.
2353 skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
2356 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2365 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
2366 const bdaddr_t *bdaddr)
2368 struct sk_buff *skb;
2373 buf[1] = sizeof(bdaddr_t);
2374 memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
2376 skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2379 BT_ERR("%s: changing Marvell device address failed (%ld)",
2388 static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
2389 const bdaddr_t *bdaddr)
2391 struct sk_buff *skb;
2398 buf[3] = sizeof(bdaddr_t);
2399 memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
2401 skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2404 BT_ERR("%s: Change address command failed (%ld)",
2413 #define QCA_DFU_PACKET_LEN 4096
2415 #define QCA_GET_TARGET_VERSION 0x09
2416 #define QCA_CHECK_STATUS 0x05
2417 #define QCA_DFU_DOWNLOAD 0x01
2419 #define QCA_SYSCFG_UPDATED 0x40
2420 #define QCA_PATCH_UPDATED 0x80
2421 #define QCA_DFU_TIMEOUT 3000
2423 struct qca_version {
2425 __le32 patch_version;
2431 struct qca_rampatch_version {
2433 __le16 patch_version;
2436 struct qca_device_info {
2438 u8 rampatch_hdr; /* length of header in rampatch */
2439 u8 nvm_hdr; /* length of header in NVM */
2440 u8 ver_offset; /* offset of version structure in rampatch */
2443 static const struct qca_device_info qca_devices_table[] = {
2444 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2445 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2446 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
2447 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2448 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2449 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2452 static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
2453 void *data, u16 size)
2455 struct btusb_data *btdata = hci_get_drvdata(hdev);
2456 struct usb_device *udev = btdata->udev;
2460 buf = kmalloc(size, GFP_KERNEL);
2464 /* Found some of USB hosts have IOT issues with ours so that we should
2465 * not wait until HCI layer is ready.
2467 pipe = usb_rcvctrlpipe(udev, 0);
2468 err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
2469 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2471 BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err);
2475 memcpy(data, buf, size);
2483 static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
2484 const struct firmware *firmware,
2487 struct btusb_data *btdata = hci_get_drvdata(hdev);
2488 struct usb_device *udev = btdata->udev;
2489 size_t count, size, sent = 0;
2493 buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
2497 count = firmware->size;
2499 size = min_t(size_t, count, hdr_size);
2500 memcpy(buf, firmware->data, size);
2502 /* USB patches should go down to controller through USB path
2503 * because binary format fits to go down through USB channel.
2504 * USB control path is for patching headers and USB bulk is for
2507 pipe = usb_sndctrlpipe(udev, 0);
2508 err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
2509 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2511 BT_ERR("%s: Failed to send headers (%d)", hdev->name, err);
2519 size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
2521 memcpy(buf, firmware->data + sent, size);
2523 pipe = usb_sndbulkpipe(udev, 0x02);
2524 err = usb_bulk_msg(udev, pipe, buf, size, &len,
2527 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2528 hdev->name, sent, firmware->size, err);
2533 BT_ERR("%s: Failed to get bulk buffer", hdev->name);
2547 static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
2548 struct qca_version *ver,
2549 const struct qca_device_info *info)
2551 struct qca_rampatch_version *rver;
2552 const struct firmware *fw;
2553 u32 ver_rom, ver_patch;
2554 u16 rver_rom, rver_patch;
2558 ver_rom = le32_to_cpu(ver->rom_version);
2559 ver_patch = le32_to_cpu(ver->patch_version);
2561 snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
2563 err = request_firmware(&fw, fwname, &hdev->dev);
2565 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2566 hdev->name, fwname, err);
2570 BT_INFO("%s: using rampatch file: %s", hdev->name, fwname);
2572 rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
2573 rver_rom = le16_to_cpu(rver->rom_version);
2574 rver_patch = le16_to_cpu(rver->patch_version);
2576 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2577 "build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom,
2580 if (rver_rom != ver_rom || rver_patch <= ver_patch) {
2581 BT_ERR("%s: rampatch file version did not match with firmware",
2587 err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
2590 release_firmware(fw);
2595 static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
2596 struct qca_version *ver,
2597 const struct qca_device_info *info)
2599 const struct firmware *fw;
2603 snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
2604 le32_to_cpu(ver->rom_version));
2606 err = request_firmware(&fw, fwname, &hdev->dev);
2608 BT_ERR("%s: failed to request NVM file: %s (%d)",
2609 hdev->name, fwname, err);
2613 BT_INFO("%s: using NVM file: %s", hdev->name, fwname);
2615 err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
2617 release_firmware(fw);
2622 static int btusb_setup_qca(struct hci_dev *hdev)
2624 const struct qca_device_info *info = NULL;
2625 struct qca_version ver;
2630 err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
2635 ver_rom = le32_to_cpu(ver.rom_version);
2636 for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
2637 if (ver_rom == qca_devices_table[i].rom_version)
2638 info = &qca_devices_table[i];
2641 BT_ERR("%s: don't support firmware rome 0x%x", hdev->name,
2646 err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
2651 if (!(status & QCA_PATCH_UPDATED)) {
2652 err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
2657 if (!(status & QCA_SYSCFG_UPDATED)) {
2658 err = btusb_setup_qca_load_nvm(hdev, &ver, info);
2666 #ifdef CONFIG_BT_HCIBTUSB_BCM
2667 static inline int __set_diag_interface(struct hci_dev *hdev)
2669 struct btusb_data *data = hci_get_drvdata(hdev);
2670 struct usb_interface *intf = data->diag;
2676 data->diag_tx_ep = NULL;
2677 data->diag_rx_ep = NULL;
2679 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2680 struct usb_endpoint_descriptor *ep_desc;
2682 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2684 if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
2685 data->diag_tx_ep = ep_desc;
2689 if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
2690 data->diag_rx_ep = ep_desc;
2695 if (!data->diag_tx_ep || !data->diag_rx_ep) {
2696 BT_ERR("%s invalid diagnostic descriptors", hdev->name);
2703 static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
2705 struct btusb_data *data = hci_get_drvdata(hdev);
2706 struct sk_buff *skb;
2710 if (!data->diag_tx_ep)
2711 return ERR_PTR(-ENODEV);
2713 urb = usb_alloc_urb(0, GFP_KERNEL);
2715 return ERR_PTR(-ENOMEM);
2717 skb = bt_skb_alloc(2, GFP_KERNEL);
2720 return ERR_PTR(-ENOMEM);
2723 *skb_put(skb, 1) = 0xf0;
2724 *skb_put(skb, 1) = enable;
2726 pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);
2728 usb_fill_bulk_urb(urb, data->udev, pipe,
2729 skb->data, skb->len, btusb_tx_complete, skb);
2731 skb->dev = (void *)hdev;
2736 static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
2738 struct btusb_data *data = hci_get_drvdata(hdev);
2744 if (!test_bit(HCI_RUNNING, &hdev->flags))
2747 urb = alloc_diag_urb(hdev, enable);
2749 return PTR_ERR(urb);
2751 return submit_or_queue_tx_urb(hdev, urb);
2755 static int btusb_probe(struct usb_interface *intf,
2756 const struct usb_device_id *id)
2758 struct usb_endpoint_descriptor *ep_desc;
2759 struct btusb_data *data;
2760 struct hci_dev *hdev;
2763 BT_DBG("intf %p id %p", intf, id);
2765 /* interface numbers are hardcoded in the spec */
2766 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
2769 if (!id->driver_info) {
2770 const struct usb_device_id *match;
2772 match = usb_match_id(intf, blacklist_table);
2777 if (id->driver_info == BTUSB_IGNORE)
2780 if (id->driver_info & BTUSB_ATH3012) {
2781 struct usb_device *udev = interface_to_usbdev(intf);
2783 /* Old firmware would otherwise let ath3k driver load
2784 * patch and sysconfig files */
2785 if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
2789 data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
2793 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2794 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2796 if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
2797 data->intr_ep = ep_desc;
2801 if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
2802 data->bulk_tx_ep = ep_desc;
2806 if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
2807 data->bulk_rx_ep = ep_desc;
2812 if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
2815 if (id->driver_info & BTUSB_AMP) {
2816 data->cmdreq_type = USB_TYPE_CLASS | 0x01;
2817 data->cmdreq = 0x2b;
2819 data->cmdreq_type = USB_TYPE_CLASS;
2820 data->cmdreq = 0x00;
2823 data->udev = interface_to_usbdev(intf);
2826 INIT_WORK(&data->work, btusb_work);
2827 INIT_WORK(&data->waker, btusb_waker);
2828 init_usb_anchor(&data->deferred);
2829 init_usb_anchor(&data->tx_anchor);
2830 spin_lock_init(&data->txlock);
2832 init_usb_anchor(&data->intr_anchor);
2833 init_usb_anchor(&data->bulk_anchor);
2834 init_usb_anchor(&data->isoc_anchor);
2835 init_usb_anchor(&data->diag_anchor);
2836 spin_lock_init(&data->rxlock);
2838 if (id->driver_info & BTUSB_INTEL_NEW) {
2839 data->recv_event = btusb_recv_event_intel;
2840 data->recv_bulk = btusb_recv_bulk_intel;
2841 set_bit(BTUSB_BOOTLOADER, &data->flags);
2843 data->recv_event = hci_recv_frame;
2844 data->recv_bulk = btusb_recv_bulk;
2847 hdev = hci_alloc_dev();
2851 hdev->bus = HCI_USB;
2852 hci_set_drvdata(hdev, data);
2854 if (id->driver_info & BTUSB_AMP)
2855 hdev->dev_type = HCI_AMP;
2857 hdev->dev_type = HCI_BREDR;
2861 SET_HCIDEV_DEV(hdev, &intf->dev);
2863 hdev->open = btusb_open;
2864 hdev->close = btusb_close;
2865 hdev->flush = btusb_flush;
2866 hdev->send = btusb_send_frame;
2867 hdev->notify = btusb_notify;
2869 if (id->driver_info & BTUSB_BCM2045)
2870 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
2872 if (id->driver_info & BTUSB_BCM92035)
2873 hdev->setup = btusb_setup_bcm92035;
2875 #ifdef CONFIG_BT_HCIBTUSB_BCM
2876 if (id->driver_info & BTUSB_BCM_PATCHRAM) {
2877 hdev->setup = btbcm_setup_patchram;
2878 hdev->set_diag = btusb_bcm_set_diag;
2879 hdev->set_bdaddr = btbcm_set_bdaddr;
2881 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2882 data->diag = usb_ifnum_to_if(data->udev, 2);
2885 if (id->driver_info & BTUSB_BCM_APPLE) {
2886 hdev->setup = btbcm_setup_apple;
2887 hdev->set_diag = btusb_bcm_set_diag;
2889 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2890 data->diag = usb_ifnum_to_if(data->udev, 2);
2894 if (id->driver_info & BTUSB_INTEL) {
2895 hdev->setup = btusb_setup_intel;
2896 hdev->shutdown = btusb_shutdown_intel;
2897 hdev->set_diag = btintel_set_diag_mfg;
2898 hdev->set_bdaddr = btintel_set_bdaddr;
2899 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2900 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2901 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
2904 if (id->driver_info & BTUSB_INTEL_NEW) {
2905 hdev->send = btusb_send_frame_intel;
2906 hdev->setup = btusb_setup_intel_new;
2907 hdev->hw_error = btintel_hw_error;
2908 hdev->set_diag = btintel_set_diag;
2909 hdev->set_bdaddr = btintel_set_bdaddr;
2910 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2911 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
2914 if (id->driver_info & BTUSB_MARVELL)
2915 hdev->set_bdaddr = btusb_set_bdaddr_marvell;
2917 if (id->driver_info & BTUSB_SWAVE) {
2918 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
2919 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
2922 if (id->driver_info & BTUSB_INTEL_BOOT)
2923 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
2925 if (id->driver_info & BTUSB_ATH3012) {
2926 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
2927 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2928 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2931 if (id->driver_info & BTUSB_QCA_ROME) {
2932 data->setup_on_usb = btusb_setup_qca;
2933 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
2936 #ifdef CONFIG_BT_HCIBTUSB_RTL
2937 if (id->driver_info & BTUSB_REALTEK) {
2938 hdev->setup = btrtl_setup_realtek;
2940 /* Realtek devices lose their updated firmware over suspend,
2941 * but the USB hub doesn't notice any status change.
2942 * Explicitly request a device reset on resume.
2944 set_bit(BTUSB_RESET_RESUME, &data->flags);
2948 if (id->driver_info & BTUSB_AMP) {
2949 /* AMP controllers do not support SCO packets */
2952 /* Interface numbers are hardcoded in the specification */
2953 data->isoc = usb_ifnum_to_if(data->udev, 1);
2957 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2959 if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
2960 if (!disable_scofix)
2961 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
2964 if (id->driver_info & BTUSB_BROKEN_ISOC)
2967 if (id->driver_info & BTUSB_DIGIANSWER) {
2968 data->cmdreq_type = USB_TYPE_VENDOR;
2969 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2972 if (id->driver_info & BTUSB_CSR) {
2973 struct usb_device *udev = data->udev;
2974 u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
2976 /* Old firmware would otherwise execute USB reset */
2977 if (bcdDevice < 0x117)
2978 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2980 /* Fake CSR devices with broken commands */
2981 if (bcdDevice <= 0x100 || bcdDevice == 0x134)
2982 hdev->setup = btusb_setup_csr;
2984 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2987 if (id->driver_info & BTUSB_SNIFFER) {
2988 struct usb_device *udev = data->udev;
2990 /* New sniffer firmware has crippled HCI interface */
2991 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
2992 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
2995 if (id->driver_info & BTUSB_INTEL_BOOT) {
2996 /* A bug in the bootloader causes that interrupt interface is
2997 * only enabled after receiving SetInterface(0, AltSetting=0).
2999 err = usb_set_interface(data->udev, 0, 0);
3001 BT_ERR("failed to set interface 0, alt 0 %d", err);
3008 err = usb_driver_claim_interface(&btusb_driver,
3016 #ifdef CONFIG_BT_HCIBTUSB_BCM
3018 if (!usb_driver_claim_interface(&btusb_driver,
3020 __set_diag_interface(hdev);
3026 err = hci_register_dev(hdev);
3032 usb_set_intfdata(intf, data);
3037 static void btusb_disconnect(struct usb_interface *intf)
3039 struct btusb_data *data = usb_get_intfdata(intf);
3040 struct hci_dev *hdev;
3042 BT_DBG("intf %p", intf);
3048 usb_set_intfdata(data->intf, NULL);
3051 usb_set_intfdata(data->isoc, NULL);
3054 usb_set_intfdata(data->diag, NULL);
3056 hci_unregister_dev(hdev);
3058 if (intf == data->intf) {
3060 usb_driver_release_interface(&btusb_driver, data->isoc);
3062 usb_driver_release_interface(&btusb_driver, data->diag);
3063 } else if (intf == data->isoc) {
3065 usb_driver_release_interface(&btusb_driver, data->diag);
3066 usb_driver_release_interface(&btusb_driver, data->intf);
3067 } else if (intf == data->diag) {
3068 usb_driver_release_interface(&btusb_driver, data->intf);
3070 usb_driver_release_interface(&btusb_driver, data->isoc);
3077 static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
3079 struct btusb_data *data = usb_get_intfdata(intf);
3081 BT_DBG("intf %p", intf);
3083 if (data->suspend_count++)
3086 spin_lock_irq(&data->txlock);
3087 if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
3088 set_bit(BTUSB_SUSPENDING, &data->flags);
3089 spin_unlock_irq(&data->txlock);
3091 spin_unlock_irq(&data->txlock);
3092 data->suspend_count--;
3096 cancel_work_sync(&data->work);
3098 btusb_stop_traffic(data);
3099 usb_kill_anchored_urbs(&data->tx_anchor);
3101 /* Optionally request a device reset on resume, but only when
3102 * wakeups are disabled. If wakeups are enabled we assume the
3103 * device will stay powered up throughout suspend.
3105 if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
3106 !device_may_wakeup(&data->udev->dev))
3107 data->udev->reset_resume = 1;
3112 static void play_deferred(struct btusb_data *data)
3117 while ((urb = usb_get_from_anchor(&data->deferred))) {
3118 err = usb_submit_urb(urb, GFP_ATOMIC);
3122 data->tx_in_flight++;
3124 usb_scuttle_anchored_urbs(&data->deferred);
3127 static int btusb_resume(struct usb_interface *intf)
3129 struct btusb_data *data = usb_get_intfdata(intf);
3130 struct hci_dev *hdev = data->hdev;
3133 BT_DBG("intf %p", intf);
3135 if (--data->suspend_count)
3138 if (!test_bit(HCI_RUNNING, &hdev->flags))
3141 if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
3142 err = btusb_submit_intr_urb(hdev, GFP_NOIO);
3144 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
3149 if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
3150 err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
3152 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
3156 btusb_submit_bulk_urb(hdev, GFP_NOIO);
3159 if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
3160 if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
3161 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
3163 btusb_submit_isoc_urb(hdev, GFP_NOIO);
3166 spin_lock_irq(&data->txlock);
3167 play_deferred(data);
3168 clear_bit(BTUSB_SUSPENDING, &data->flags);
3169 spin_unlock_irq(&data->txlock);
3170 schedule_work(&data->work);
3175 usb_scuttle_anchored_urbs(&data->deferred);
3177 spin_lock_irq(&data->txlock);
3178 clear_bit(BTUSB_SUSPENDING, &data->flags);
3179 spin_unlock_irq(&data->txlock);
3185 static struct usb_driver btusb_driver = {
3187 .probe = btusb_probe,
3188 .disconnect = btusb_disconnect,
3190 .suspend = btusb_suspend,
3191 .resume = btusb_resume,
3193 .id_table = btusb_table,
3194 .supports_autosuspend = 1,
3195 .disable_hub_initiated_lpm = 1,
3198 module_usb_driver(btusb_driver);
3200 module_param(disable_scofix, bool, 0644);
3201 MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
3203 module_param(force_scofix, bool, 0644);
3204 MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
3206 module_param(reset, bool, 0644);
3207 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
3209 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3210 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
3211 MODULE_VERSION(VERSION);
3212 MODULE_LICENSE("GPL");