2 # I2C Sensor chip drivers configuration
5 menu "Hardware Monitoring support"
8 tristate "Hardware Monitoring support"
11 Hardware monitoring devices let you monitor the hardware health
12 of a system. Most modern motherboards include such a device. It
13 can include temperature sensors, voltage sensors, fan speed
14 sensors and various additional features such as the ability to
15 control the speed of the fans. If you want this support you
16 should say Y here and also to the specific driver(s) for your
17 sensors chip(s) below.
19 This support can also be built as a module. If so, the module
26 config SENSORS_ADM1021
27 tristate "Analog Devices ADM1021 and compatibles"
28 depends on HWMON && I2C
30 If you say yes here you get support for Analog Devices ADM1021
31 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
32 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
33 and the XEON processor built-in sensor.
35 This driver can also be built as a module. If so, the module
36 will be called adm1021.
38 config SENSORS_ADM1025
39 tristate "Analog Devices ADM1025 and compatibles"
40 depends on HWMON && I2C && EXPERIMENTAL
43 If you say yes here you get support for Analog Devices ADM1025
44 and Philips NE1619 sensor chips.
46 This driver can also be built as a module. If so, the module
47 will be called adm1025.
49 config SENSORS_ADM1026
50 tristate "Analog Devices ADM1026 and compatibles"
51 depends on HWMON && I2C && EXPERIMENTAL
54 If you say yes here you get support for Analog Devices ADM1026
57 This driver can also be built as a module. If so, the module
58 will be called adm1026.
60 config SENSORS_ADM1031
61 tristate "Analog Devices ADM1031 and compatibles"
62 depends on HWMON && I2C && EXPERIMENTAL
64 If you say yes here you get support for Analog Devices ADM1031
65 and ADM1030 sensor chips.
67 This driver can also be built as a module. If so, the module
68 will be called adm1031.
70 config SENSORS_ADM9240
71 tristate "Analog Devices ADM9240 and compatibles"
72 depends on HWMON && I2C && EXPERIMENTAL
75 If you say yes here you get support for Analog Devices ADM9240,
76 Dallas DS1780, National Semiconductor LM81 sensor chips.
78 This driver can also be built as a module. If so, the module
79 will be called adm9240.
82 tristate "AMD Athlon64/FX or Opteron temperature sensor"
83 depends on HWMON && X86 && PCI && EXPERIMENTAL
85 If you say yes here you get support for the temperature
86 sensor(s) inside your CPU. Supported is whole AMD K8
87 microarchitecture. Please note that you will need at least
88 lm-sensors 2.10.1 for proper userspace support.
90 This driver can also be built as a module. If so, the module
91 will be called k8temp.
94 tristate "Asus ASB100 Bach"
95 depends on HWMON && I2C && EXPERIMENTAL
98 If you say yes here you get support for the ASB100 Bach sensor
99 chip found on some Asus mainboards.
101 This driver can also be built as a module. If so, the module
102 will be called asb100.
105 tristate "Attansic ATXP1 VID controller"
106 depends on HWMON && I2C && EXPERIMENTAL
109 If you say yes here you get support for the Attansic ATXP1 VID
112 If your board have such a chip, you are able to control your CPU
113 core and other voltages.
115 This driver can also be built as a module. If so, the module
116 will be called atxp1.
118 config SENSORS_DS1621
119 tristate "Dallas Semiconductor DS1621 and DS1625"
120 depends on HWMON && I2C && EXPERIMENTAL
122 If you say yes here you get support for Dallas Semiconductor
123 DS1621 and DS1625 sensor chips.
125 This driver can also be built as a module. If so, the module
126 will be called ds1621.
128 config SENSORS_F71805F
129 tristate "Fintek F71805F/FG"
130 depends on HWMON && EXPERIMENTAL
132 If you say yes here you get support for hardware monitoring
133 features of the Fintek F71805F/FG chips.
135 This driver can also be built as a module. If so, the module
136 will be called f71805f.
138 config SENSORS_FSCHER
139 tristate "FSC Hermes"
140 depends on HWMON && I2C && EXPERIMENTAL
142 If you say yes here you get support for Fujitsu Siemens
143 Computers Hermes sensor chips.
145 This driver can also be built as a module. If so, the module
146 will be called fscher.
148 config SENSORS_FSCPOS
149 tristate "FSC Poseidon"
150 depends on HWMON && I2C && EXPERIMENTAL
152 If you say yes here you get support for Fujitsu Siemens
153 Computers Poseidon sensor chips.
155 This driver can also be built as a module. If so, the module
156 will be called fscpos.
158 config SENSORS_GL518SM
159 tristate "Genesys Logic GL518SM"
160 depends on HWMON && I2C
162 If you say yes here you get support for Genesys Logic GL518SM
165 This driver can also be built as a module. If so, the module
166 will be called gl518sm.
168 config SENSORS_GL520SM
169 tristate "Genesys Logic GL520SM"
170 depends on HWMON && I2C && EXPERIMENTAL
173 If you say yes here you get support for Genesys Logic GL520SM
176 This driver can also be built as a module. If so, the module
177 will be called gl520sm.
180 tristate "ITE IT87xx and compatibles"
181 depends on HWMON && I2C
185 If you say yes here you get support for ITE IT87xx sensor chips
188 This driver can also be built as a module. If so, the module
192 tristate "National Semiconductor LM63"
193 depends on HWMON && I2C && EXPERIMENTAL
195 If you say yes here you get support for the National Semiconductor
196 LM63 remote diode digital temperature sensor with integrated fan
197 control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
198 motherboard, among others.
200 This driver can also be built as a module. If so, the module
204 tristate "National Semiconductor LM75 and compatibles"
205 depends on HWMON && I2C
207 If you say yes here you get support for National Semiconductor LM75
208 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
209 9-bit precision mode), and TelCom (now Microchip) TCN75.
211 The DS75 and DS1775 in 10- to 12-bit precision modes will require
212 a force module parameter. The driver will not handle the extra
215 This driver can also be built as a module. If so, the module
219 tristate "National Semiconductor LM77"
220 depends on HWMON && I2C && EXPERIMENTAL
222 If you say yes here you get support for National Semiconductor LM77
225 This driver can also be built as a module. If so, the module
229 tristate "National Semiconductor LM78 and compatibles"
230 depends on HWMON && I2C && EXPERIMENTAL
234 If you say yes here you get support for National Semiconductor LM78,
237 This driver can also be built as a module. If so, the module
241 tristate "National Semiconductor LM80"
242 depends on HWMON && I2C && EXPERIMENTAL
244 If you say yes here you get support for National Semiconductor
247 This driver can also be built as a module. If so, the module
251 tristate "National Semiconductor LM83 and compatibles"
252 depends on HWMON && I2C
254 If you say yes here you get support for National Semiconductor
255 LM82 and LM83 sensor chips.
257 This driver can also be built as a module. If so, the module
261 tristate "National Semiconductor LM85 and compatibles"
262 depends on HWMON && I2C && EXPERIMENTAL
265 If you say yes here you get support for National Semiconductor LM85
266 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
268 This driver can also be built as a module. If so, the module
272 tristate "National Semiconductor LM87"
273 depends on HWMON && I2C && EXPERIMENTAL
276 If you say yes here you get support for National Semiconductor LM87
279 This driver can also be built as a module. If so, the module
283 tristate "National Semiconductor LM90 and compatibles"
284 depends on HWMON && I2C
286 If you say yes here you get support for National Semiconductor LM90,
287 LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
288 MAX6658 sensor chips.
290 The Analog Devices ADT7461 sensor chip is also supported, but only
291 if found in ADM1032 compatibility mode.
293 This driver can also be built as a module. If so, the module
297 tristate "National Semiconductor LM92 and compatibles"
298 depends on HWMON && I2C && EXPERIMENTAL
300 If you say yes here you get support for National Semiconductor LM92
301 and Maxim MAX6635 sensor chips.
303 This driver can also be built as a module. If so, the module
306 config SENSORS_MAX1619
307 tristate "Maxim MAX1619 sensor chip"
308 depends on HWMON && I2C && EXPERIMENTAL
310 If you say yes here you get support for MAX1619 sensor chip.
312 This driver can also be built as a module. If so, the module
313 will be called max1619.
315 config SENSORS_PC87360
316 tristate "National Semiconductor PC87360 family"
317 depends on HWMON && I2C && EXPERIMENTAL
321 If you say yes here you get access to the hardware monitoring
322 functions of the National Semiconductor PC8736x Super-I/O chips.
323 The PC87360, PC87363 and PC87364 only have fan monitoring and
324 control. The PC87365 and PC87366 additionally have voltage and
325 temperature monitoring.
327 This driver can also be built as a module. If so, the module
328 will be called pc87360.
330 config SENSORS_PC87427
331 tristate "National Semiconductor PC87427"
332 depends on HWMON && EXPERIMENTAL
334 If you say yes here you get access to the hardware monitoring
335 functions of the National Semiconductor PC87427 Super-I/O chip.
336 The chip has two distinct logical devices, one for fan speed
337 monitoring and control, and one for voltage and temperature
338 monitoring. Only fan speed monitoring is supported right now.
340 This driver can also be built as a module. If so, the module
341 will be called pc87427.
343 config SENSORS_SIS5595
344 tristate "Silicon Integrated Systems Corp. SiS5595"
345 depends on HWMON && I2C && PCI && EXPERIMENTAL
348 If you say yes here you get support for the integrated sensors in
349 SiS5595 South Bridges.
351 This driver can also be built as a module. If so, the module
352 will be called sis5595.
354 config SENSORS_SMSC47M1
355 tristate "SMSC LPC47M10x and compatibles"
356 depends on HWMON && I2C && EXPERIMENTAL
359 If you say yes here you get support for the integrated fan
360 monitoring and control capabilities of the SMSC LPC47B27x,
361 LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192 and
364 The temperature and voltage sensor features of the LPC47M192
365 and LPC47M997 are supported by another driver, select also
366 "SMSC LPC47M192 and compatibles" below for those.
368 This driver can also be built as a module. If so, the module
369 will be called smsc47m1.
371 config SENSORS_SMSC47M192
372 tristate "SMSC LPC47M192 and compatibles"
373 depends on HWMON && I2C && EXPERIMENTAL
376 If you say yes here you get support for the temperature and
377 voltage sensors of the SMSC LPC47M192 and LPC47M997 chips.
379 The fan monitoring and control capabilities of these chips
380 are supported by another driver, select
381 "SMSC LPC47M10x and compatibles" above. You need both drivers
382 if you want fan control and voltage/temperature sensor support.
384 This driver can also be built as a module. If so, the module
385 will be called smsc47m192.
387 config SENSORS_SMSC47B397
388 tristate "SMSC LPC47B397-NC"
389 depends on HWMON && I2C && EXPERIMENTAL
392 If you say yes here you get support for the SMSC LPC47B397-NC
395 This driver can also be built as a module. If so, the module
396 will be called smsc47b397.
398 config SENSORS_VIA686A
400 depends on HWMON && I2C && PCI
403 If you say yes here you get support for the integrated sensors in
404 Via 686A/B South Bridges.
406 This driver can also be built as a module. If so, the module
407 will be called via686a.
409 config SENSORS_VT8231
411 depends on HWMON && I2C && PCI && EXPERIMENTAL
415 If you say yes here then you get support for the integrated sensors
416 in the VIA VT8231 device.
418 This driver can also be built as a module. If so, the module
419 will be called vt8231.
421 config SENSORS_W83781D
422 tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
423 depends on HWMON && I2C
427 If you say yes here you get support for the Winbond W8378x series
428 of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
429 and the similar Asus AS99127F.
431 This driver can also be built as a module. If so, the module
432 will be called w83781d.
434 config SENSORS_W83792D
435 tristate "Winbond W83792D"
436 depends on HWMON && I2C && EXPERIMENTAL
438 If you say yes here you get support for the Winbond W83792D chip.
440 This driver can also be built as a module. If so, the module
441 will be called w83792d.
443 config SENSORS_W83L785TS
444 tristate "Winbond W83L785TS-S"
445 depends on HWMON && I2C && EXPERIMENTAL
447 If you say yes here you get support for the Winbond W83L785TS-S
448 sensor chip, which is used on the Asus A7N8X, among other
451 This driver can also be built as a module. If so, the module
452 will be called w83l785ts.
454 config SENSORS_W83627HF
455 tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
456 depends on HWMON && I2C && EXPERIMENTAL
460 If you say yes here you get support for the Winbond W836X7 series
461 of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
463 This driver can also be built as a module. If so, the module
464 will be called w83627hf.
466 config SENSORS_W83627EHF
467 tristate "Winbond W83627EHF"
468 depends on HWMON && I2C && EXPERIMENTAL
471 If you say yes here you get preliminary support for the hardware
472 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
473 Only fan and temperature inputs are supported at the moment, while
474 the chip does much more than that.
476 This driver also supports the W83627EHG, which is the lead-free
477 version of the W83627EHF.
479 This driver can also be built as a module. If so, the module
480 will be called w83627ehf.
483 tristate "IBM Hard Drive Active Protection System (hdaps)"
484 depends on HWMON && INPUT && X86
487 This driver provides support for the IBM Hard Drive Active Protection
488 System (hdaps), which provides an accelerometer and other misc. data.
489 ThinkPads starting with the R50, T41, and X40 are supported. The
490 accelerometer data is readable via sysfs.
492 This driver also provides an absolute input class device, allowing
493 the laptop to act as a pinball machine-esque joystick.
495 Say Y here if you have an applicable laptop and want to experience
496 the awesome power of hdaps.
498 config HWMON_DEBUG_CHIP
499 bool "Hardware Monitoring Chip debugging messages"
503 Say Y here if you want the I2C chip drivers to produce a bunch of
504 debug messages to the system log. Select this if you are having
505 a problem with I2C support and want to see more of what is going