drivers/input/misc/keyspan_remote.c

   1 /*
   2  * keyspan_remote: USB driver for the Keyspan DMR
   3  *
   4  * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License as
   8  *      published by the Free Software Foundation, version 2.
   9  *
  10  * This driver has been put together with the support of Innosys, Inc.
  11  * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/errno.h>
  16 #include <linux/init.h>
  17 #include <linux/slab.h>
  18 #include <linux/module.h>
  19 #include <linux/usb/input.h>
  20
  21 #define DRIVER_VERSION  "v0.1"
  22 #define DRIVER_AUTHOR   "Michael Downey <downey@zymeta.com>"
  23 #define DRIVER_DESC     "Driver for the USB Keyspan remote control."
  24 #define DRIVER_LICENSE  "GPL"
  25
  26 /* Parameters that can be passed to the driver. */
  27 static int debug;
  28 module_param(debug, int, 0444);
  29 MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
  30
  31 /* Vendor and product ids */
  32 #define USB_KEYSPAN_VENDOR_ID           0x06CD
  33 #define USB_KEYSPAN_PRODUCT_UIA11       0x0202
  34
  35 /* Defines for converting the data from the remote. */
  36 #define ZERO            0x18
  37 #define ZERO_MASK       0x1F    /* 5 bits for a 0 */
  38 #define ONE             0x3C
  39 #define ONE_MASK        0x3F    /* 6 bits for a 1 */
  40 #define SYNC            0x3F80
  41 #define SYNC_MASK       0x3FFF  /* 14 bits for a SYNC sequence */
  42 #define STOP            0x00
  43 #define STOP_MASK       0x1F    /* 5 bits for the STOP sequence */
  44 #define GAP             0xFF
  45
  46 #define RECV_SIZE       8       /* The UIA-11 type have a 8 byte limit. */
  47
  48 /*
  49  * Table that maps the 31 possible keycodes to input keys.
  50  * Currently there are 15 and 17 button models so RESERVED codes
  51  * are blank areas in the mapping.
  52  */
  53 static const unsigned short keyspan_key_table[] = {
  54         KEY_RESERVED,           /* 0 is just a place holder. */
  55         KEY_RESERVED,
  56         KEY_STOP,
  57         KEY_PLAYCD,
  58         KEY_RESERVED,
  59         KEY_PREVIOUSSONG,
  60         KEY_REWIND,
  61         KEY_FORWARD,
  62         KEY_NEXTSONG,
  63         KEY_RESERVED,
  64         KEY_RESERVED,
  65         KEY_RESERVED,
  66         KEY_PAUSE,
  67         KEY_VOLUMEUP,
  68         KEY_RESERVED,
  69         KEY_RESERVED,
  70         KEY_RESERVED,
  71         KEY_VOLUMEDOWN,
  72         KEY_RESERVED,
  73         KEY_UP,
  74         KEY_RESERVED,
  75         KEY_MUTE,
  76         KEY_LEFT,
  77         KEY_ENTER,
  78         KEY_RIGHT,
  79         KEY_RESERVED,
  80         KEY_RESERVED,
  81         KEY_DOWN,
  82         KEY_RESERVED,
  83         KEY_KPASTERISK,
  84         KEY_RESERVED,
  85         KEY_MENU
  86 };
  87
  88 /* table of devices that work with this driver */
  89 static struct usb_device_id keyspan_table[] = {
  90         { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
  91         { }                                     /* Terminating entry */
  92 };
  93
  94 /* Structure to store all the real stuff that a remote sends to us. */
  95 struct keyspan_message {
  96         u16     system;
  97         u8      button;
  98         u8      toggle;
  99 };
 100
 101 /* Structure used for all the bit testing magic needed to be done. */
 102 struct bit_tester {
 103         u32     tester;
 104         int     len;
 105         int     pos;
 106         int     bits_left;
 107         u8      buffer[32];
 108 };
 109
 110 /* Structure to hold all of our driver specific stuff */
 111 struct usb_keyspan {
 112         char                            name[128];
 113         char                            phys[64];
 114         unsigned short                  keymap[ARRAY_SIZE(keyspan_key_table)];
 115         struct usb_device               *udev;
 116         struct input_dev                *input;
 117         struct usb_interface            *interface;
 118         struct usb_endpoint_descriptor  *in_endpoint;
 119         struct urb*                     irq_urb;
 120         int                             open;
 121         dma_addr_t                      in_dma;
 122         unsigned char                   *in_buffer;
 123
 124         /* variables used to parse messages from remote. */
 125         struct bit_tester               data;
 126         int                             stage;
 127         int                             toggle;
 128 };
 129
 130 static struct usb_driver keyspan_driver;
 131
 132 /*
 133  * Debug routine that prints out what we've received from the remote.
 134  */
 135 static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
 136 {
 137         char codes[4 * RECV_SIZE];
 138         int i;
 139
 140         for (i = 0; i < RECV_SIZE; i++)
 141                 snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
 142
 143         dev_info(&dev->udev->dev, "%s\n", codes);
 144 }
 145
 146 /*
 147  * Routine that manages the bit_tester structure.  It makes sure that there are
 148  * at least bits_needed bits loaded into the tester.
 149  */
 150 static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
 151 {
 152         if (dev->data.bits_left >= bits_needed)
 153                 return 0;
 154
 155         /*
 156          * Somehow we've missed the last message. The message will be repeated
 157          * though so it's not too big a deal
 158          */
 159         if (dev->data.pos >= dev->data.len) {
 160                 dev_dbg(&dev->interface->dev,
 161                         "%s - Error ran out of data. pos: %d, len: %d\n",
 162                         __func__, dev->data.pos, dev->data.len);
 163                 return -1;
 164         }
 165
 166         /* Load as much as we can into the tester. */
 167         while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
 168                (dev->data.pos < dev->data.len)) {
 169                 dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
 170                 dev->data.bits_left += 8;
 171         }
 172
 173         return 0;
 174 }
 175
 176 static void keyspan_report_button(struct usb_keyspan *remote, int button, int press)
 177 {
 178         struct input_dev *input = remote->input;
 179
 180         input_event(input, EV_MSC, MSC_SCAN, button);
 181         input_report_key(input, remote->keymap[button], press);
 182         input_sync(input);
 183 }
 184
 185 /*
 186  * Routine that handles all the logic needed to parse out the message from the remote.
 187  */
 188 static void keyspan_check_data(struct usb_keyspan *remote)
 189 {
 190         int i;
 191         int found = 0;
 192         struct keyspan_message message;
 193
 194         switch(remote->stage) {
 195         case 0:
 196                 /*
 197                  * In stage 0 we want to find the start of a message.  The remote sends a 0xFF as filler.
 198                  * So the first byte that isn't a FF should be the start of a new message.
 199                  */
 200                 for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
 201
 202                 if (i < RECV_SIZE) {
 203                         memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
 204                         remote->data.len = RECV_SIZE;
 205                         remote->data.pos = 0;
 206                         remote->data.tester = 0;
 207                         remote->data.bits_left = 0;
 208                         remote->stage = 1;
 209                 }
 210                 break;
 211
 212         case 1:
 213                 /*
 214                  * Stage 1 we should have 16 bytes and should be able to detect a
 215                  * SYNC.  The SYNC is 14 bits, 7 0's and then 7 1's.
 216                  */
 217                 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
 218                 remote->data.len += RECV_SIZE;
 219
 220                 found = 0;
 221                 while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
 222                         for (i = 0; i < 8; ++i) {
 223                                 if (keyspan_load_tester(remote, 14) != 0) {
 224                                         remote->stage = 0;
 225                                         return;
 226                                 }
 227
 228                                 if ((remote->data.tester & SYNC_MASK) == SYNC) {
 229                                         remote->data.tester = remote->data.tester >> 14;
 230                                         remote->data.bits_left -= 14;
 231                                         found = 1;
 232                                         break;
 233                                 } else {
 234                                         remote->data.tester = remote->data.tester >> 1;
 235                                         --remote->data.bits_left;
 236                                 }
 237                         }
 238                 }
 239
 240                 if (!found) {
 241                         remote->stage = 0;
 242                         remote->data.len = 0;
 243                 } else {
 244                         remote->stage = 2;
 245                 }
 246                 break;
 247
 248         case 2:
 249                 /*
 250                  * Stage 2 we should have 24 bytes which will be enough for a full
 251                  * message.  We need to parse out the system code, button code,
 252                  * toggle code, and stop.
 253                  */
 254                 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
 255                 remote->data.len += RECV_SIZE;
 256
 257                 message.system = 0;
 258                 for (i = 0; i < 9; i++) {
 259                         keyspan_load_tester(remote, 6);
 260
 261                         if ((remote->data.tester & ZERO_MASK) == ZERO) {
 262                                 message.system = message.system << 1;
 263                                 remote->data.tester = remote->data.tester >> 5;
 264                                 remote->data.bits_left -= 5;
 265                         } else if ((remote->data.tester & ONE_MASK) == ONE) {
 266                                 message.system = (message.system << 1) + 1;
 267                                 remote->data.tester = remote->data.tester >> 6;
 268                                 remote->data.bits_left -= 6;
 269                         } else {
 270                                 dev_err(&remote->interface->dev,
 271                                         "%s - Unknown sequence found in system data.\n",
 272                                         __func__);
 273                                 remote->stage = 0;
 274                                 return;
 275                         }
 276                 }
 277
 278                 message.button = 0;
 279                 for (i = 0; i < 5; i++) {
 280                         keyspan_load_tester(remote, 6);
 281
 282                         if ((remote->data.tester & ZERO_MASK) == ZERO) {
 283                                 message.button = message.button << 1;
 284                                 remote->data.tester = remote->data.tester >> 5;
 285                                 remote->data.bits_left -= 5;
 286                         } else if ((remote->data.tester & ONE_MASK) == ONE) {
 287                                 message.button = (message.button << 1) + 1;
 288                                 remote->data.tester = remote->data.tester >> 6;
 289                                 remote->data.bits_left -= 6;
 290                         } else {
 291                                 dev_err(&remote->interface->dev,
 292                                         "%s - Unknown sequence found in button data.\n",
 293                                         __func__);
 294                                 remote->stage = 0;
 295                                 return;
 296                         }
 297                 }
 298
 299                 keyspan_load_tester(remote, 6);
 300                 if ((remote->data.tester & ZERO_MASK) == ZERO) {
 301                         message.toggle = 0;
 302                         remote->data.tester = remote->data.tester >> 5;
 303                         remote->data.bits_left -= 5;
 304                 } else if ((remote->data.tester & ONE_MASK) == ONE) {
 305                         message.toggle = 1;
 306                         remote->data.tester = remote->data.tester >> 6;
 307                         remote->data.bits_left -= 6;
 308                 } else {
 309                         dev_err(&remote->interface->dev,
 310                                 "%s - Error in message, invalid toggle.\n",
 311                                 __func__);
 312                         remote->stage = 0;
 313                         return;
 314                 }
 315
 316                 keyspan_load_tester(remote, 5);
 317                 if ((remote->data.tester & STOP_MASK) == STOP) {
 318                         remote->data.tester = remote->data.tester >> 5;
 319                         remote->data.bits_left -= 5;
 320                 } else {
 321                         dev_err(&remote->interface->dev,
 322                                 "Bad message received, no stop bit found.\n");
 323                 }
 324
 325                 dev_dbg(&remote->interface->dev,
 326                         "%s found valid message: system: %d, button: %d, toggle: %d\n",
 327                         __func__, message.system, message.button, message.toggle);
 328
 329                 if (message.toggle != remote->toggle) {
 330                         keyspan_report_button(remote, message.button, 1);
 331                         keyspan_report_button(remote, message.button, 0);
 332                         remote->toggle = message.toggle;
 333                 }
 334
 335                 remote->stage = 0;
 336                 break;
 337         }
 338 }
 339
 340 /*
 341  * Routine for sending all the initialization messages to the remote.
 342  */
 343 static int keyspan_setup(struct usb_device* dev)
 344 {
 345         int retval = 0;
 346
 347         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 348                                  0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
 349         if (retval) {
 350                 dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
 351                         __func__, retval);
 352                 return(retval);
 353         }
 354
 355         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 356                                  0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
 357         if (retval) {
 358                 dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
 359                         __func__, retval);
 360                 return(retval);
 361         }
 362
 363         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 364                                  0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
 365         if (retval) {
 366                 dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
 367                         __func__, retval);
 368                 return(retval);
 369         }
 370
 371         dev_dbg(&dev->dev, "%s - Setup complete.\n", __func__);
 372         return(retval);
 373 }
 374
 375 /*
 376  * Routine used to handle a new message that has come in.
 377  */
 378 static void keyspan_irq_recv(struct urb *urb)
 379 {
 380         struct usb_keyspan *dev = urb->context;
 381         int retval;
 382
 383         /* Check our status in case we need to bail out early. */
 384         switch (urb->status) {
 385         case 0:
 386                 break;
 387
 388         /* Device went away so don't keep trying to read from it. */
 389         case -ECONNRESET:
 390         case -ENOENT:
 391         case -ESHUTDOWN:
 392                 return;
 393
 394         default:
 395                 goto resubmit;
 396                 break;
 397         }
 398
 399         if (debug)
 400                 keyspan_print(dev);
 401
 402         keyspan_check_data(dev);
 403
 404 resubmit:
 405         retval = usb_submit_urb(urb, GFP_ATOMIC);
 406         if (retval)
 407                 dev_err(&dev->interface->dev,
 408                         "%s - usb_submit_urb failed with result: %d\n",
 409                         __func__, retval);
 410 }
 411
 412 static int keyspan_open(struct input_dev *dev)
 413 {
 414         struct usb_keyspan *remote = input_get_drvdata(dev);
 415
 416         remote->irq_urb->dev = remote->udev;
 417         if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
 418                 return -EIO;
 419
 420         return 0;
 421 }
 422
 423 static void keyspan_close(struct input_dev *dev)
 424 {
 425         struct usb_keyspan *remote = input_get_drvdata(dev);
 426
 427         usb_kill_urb(remote->irq_urb);
 428 }
 429
 430 static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
 431 {
 432
 433         struct usb_endpoint_descriptor *endpoint;
 434         int i;
 435
 436         for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
 437                 endpoint = &iface->endpoint[i].desc;
 438
 439                 if (usb_endpoint_is_int_in(endpoint)) {
 440                         /* we found our interrupt in endpoint */
 441                         return endpoint;
 442                 }
 443         }
 444
 445         return NULL;
 446 }
 447
 448 /*
 449  * Routine that sets up the driver to handle a specific USB device detected on the bus.
 450  */
 451 static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
 452 {
 453         struct usb_device *udev = interface_to_usbdev(interface);
 454         struct usb_endpoint_descriptor *endpoint;
 455         struct usb_keyspan *remote;
 456         struct input_dev *input_dev;
 457         int i, error;
 458
 459         endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
 460         if (!endpoint)
 461                 return -ENODEV;
 462
 463         remote = kzalloc(sizeof(*remote), GFP_KERNEL);
 464         input_dev = input_allocate_device();
 465         if (!remote || !input_dev) {
 466                 error = -ENOMEM;
 467                 goto fail1;
 468         }
 469
 470         remote->udev = udev;
 471         remote->input = input_dev;
 472         remote->interface = interface;
 473         remote->in_endpoint = endpoint;
 474         remote->toggle = -1;    /* Set to -1 so we will always not match the toggle from the first remote message. */
 475
 476         remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
 477         if (!remote->in_buffer) {
 478                 error = -ENOMEM;
 479                 goto fail1;
 480         }
 481
 482         remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
 483         if (!remote->irq_urb) {
 484                 error = -ENOMEM;
 485                 goto fail2;
 486         }
 487
 488         error = keyspan_setup(udev);
 489         if (error) {
 490                 error = -ENODEV;
 491                 goto fail3;
 492         }
 493
 494         if (udev->manufacturer)
 495                 strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
 496
 497         if (udev->product) {
 498                 if (udev->manufacturer)
 499                         strlcat(remote->name, " ", sizeof(remote->name));
 500                 strlcat(remote->name, udev->product, sizeof(remote->name));
 501         }
 502
 503         if (!strlen(remote->name))
 504                 snprintf(remote->name, sizeof(remote->name),
 505                          "USB Keyspan Remote %04x:%04x",
 506                          le16_to_cpu(udev->descriptor.idVendor),
 507                          le16_to_cpu(udev->descriptor.idProduct));
 508
 509         usb_make_path(udev, remote->phys, sizeof(remote->phys));
 510         strlcat(remote->phys, "/input0", sizeof(remote->phys));
 511         memcpy(remote->keymap, keyspan_key_table, sizeof(remote->keymap));
 512
 513         input_dev->name = remote->name;
 514         input_dev->phys = remote->phys;
 515         usb_to_input_id(udev, &input_dev->id);
 516         input_dev->dev.parent = &interface->dev;
 517         input_dev->keycode = remote->keymap;
 518         input_dev->keycodesize = sizeof(unsigned short);
 519         input_dev->keycodemax = ARRAY_SIZE(remote->keymap);
 520
 521         input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 522         __set_bit(EV_KEY, input_dev->evbit);
 523         for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
 524                 __set_bit(keyspan_key_table[i], input_dev->keybit);
 525         __clear_bit(KEY_RESERVED, input_dev->keybit);
 526
 527         input_set_drvdata(input_dev, remote);
 528
 529         input_dev->open = keyspan_open;
 530         input_dev->close = keyspan_close;
 531
 532         /*
 533          * Initialize the URB to access the device.
 534          * The urb gets sent to the device in keyspan_open()
 535          */
 536         usb_fill_int_urb(remote->irq_urb,
 537                          remote->udev,
 538                          usb_rcvintpipe(remote->udev, endpoint->bEndpointAddress),
 539                          remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
 540                          endpoint->bInterval);
 541         remote->irq_urb->transfer_dma = remote->in_dma;
 542         remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 543
 544         /* we can register the device now, as it is ready */
 545         error = input_register_device(remote->input);
 546         if (error)
 547                 goto fail3;
 548
 549         /* save our data pointer in this interface device */
 550         usb_set_intfdata(interface, remote);
 551
 552         return 0;
 553
 554  fail3: usb_free_urb(remote->irq_urb);
 555  fail2: usb_free_coherent(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 556  fail1: kfree(remote);
 557         input_free_device(input_dev);
 558
 559         return error;
 560 }
 561
 562 /*
 563  * Routine called when a device is disconnected from the USB.
 564  */
 565 static void keyspan_disconnect(struct usb_interface *interface)
 566 {
 567         struct usb_keyspan *remote;
 568
 569         remote = usb_get_intfdata(interface);
 570         usb_set_intfdata(interface, NULL);
 571
 572         if (remote) {   /* We have a valid driver structure so clean up everything we allocated. */
 573                 input_unregister_device(remote->input);
 574                 usb_kill_urb(remote->irq_urb);
 575                 usb_free_urb(remote->irq_urb);
 576                 usb_free_coherent(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 577                 kfree(remote);
 578         }
 579 }
 580
 581 /*
 582  * Standard driver set up sections
 583  */
 584 static struct usb_driver keyspan_driver =
 585 {
 586         .name =         "keyspan_remote",
 587         .probe =        keyspan_probe,
 588         .disconnect =   keyspan_disconnect,
 589         .id_table =     keyspan_table
 590 };
 591
 592 module_usb_driver(keyspan_driver);
 593
 594 MODULE_DEVICE_TABLE(usb, keyspan_table);
 595 MODULE_AUTHOR(DRIVER_AUTHOR);
 596 MODULE_DESCRIPTION(DRIVER_DESC);
 597 MODULE_LICENSE(DRIVER_LICENSE);