drivers/leds/leds-blinkm.c

   1 /*
   2  *  leds-blinkm.c
   3  *  (c) Jan-Simon Möller (dl9pf@gmx.de)
   4  *
   5  *  This program is free software; you can redistribute it and/or modify
   6  *  it under the terms of the GNU General Public License as published by
   7  *  the Free Software Foundation; either version 2 of the License, or
   8  *  (at your option) any later version.
   9  *
  10  *  This program is distributed in the hope that it will be useful,
  11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  *  GNU General Public License for more details.
  14  *
  15  *  You should have received a copy of the GNU General Public License
  16  *  along with this program; if not, write to the Free Software
  17  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  */
  19
  20 #include <linux/module.h>
  21 #include <linux/init.h>
  22 #include <linux/slab.h>
  23 #include <linux/jiffies.h>
  24 #include <linux/i2c.h>
  25 #include <linux/err.h>
  26 #include <linux/mutex.h>
  27 #include <linux/sysfs.h>
  28 #include <linux/printk.h>
  29 #include <linux/pm_runtime.h>
  30 #include <linux/leds.h>
  31 #include <linux/delay.h>
  32
  33 /* Addresses to scan - BlinkM is on 0x09 by default*/
  34 static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
  35
  36 static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
  37 static int blinkm_test_run(struct i2c_client *client);
  38
  39 struct blinkm_led {
  40         struct i2c_client *i2c_client;
  41         struct led_classdev led_cdev;
  42         int id;
  43         atomic_t active;
  44 };
  45
  46 struct blinkm_work {
  47         struct blinkm_led *blinkm_led;
  48         struct work_struct work;
  49 };
  50
  51 #define cdev_to_blmled(c)          container_of(c, struct blinkm_led, led_cdev)
  52 #define work_to_blmwork(c)         container_of(c, struct blinkm_work, work)
  53
  54 struct blinkm_data {
  55         struct i2c_client *i2c_client;
  56         struct mutex update_lock;
  57         /* used for led class interface */
  58         struct blinkm_led blinkm_leds[3];
  59         /* used for "blinkm" sysfs interface */
  60         u8 red;                 /* color red */
  61         u8 green;               /* color green */
  62         u8 blue;                /* color blue */
  63         /* next values to use for transfer */
  64         u8 next_red;                    /* color red */
  65         u8 next_green;          /* color green */
  66         u8 next_blue;           /* color blue */
  67         /* internal use */
  68         u8 args[7];             /* set of args for transmission */
  69         u8 i2c_addr;            /* i2c addr */
  70         u8 fw_ver;              /* firmware version */
  71         /* used, but not from userspace */
  72         u8 hue;                 /* HSB  hue */
  73         u8 saturation;          /* HSB  saturation */
  74         u8 brightness;          /* HSB  brightness */
  75         u8 next_hue;                    /* HSB  hue */
  76         u8 next_saturation;             /* HSB  saturation */
  77         u8 next_brightness;             /* HSB  brightness */
  78         /* currently unused / todo */
  79         u8 fade_speed;          /* fade speed     1 - 255 */
  80         s8 time_adjust;         /* time adjust -128 - 127 */
  81         u8 fade:1;              /* fade on = 1, off = 0 */
  82         u8 rand:1;              /* rand fade mode on = 1 */
  83         u8 script_id;           /* script ID */
  84         u8 script_repeats;      /* repeats of script */
  85         u8 script_startline;    /* line to start */
  86 };
  87
  88 /* Colors */
  89 #define RED   0
  90 #define GREEN 1
  91 #define BLUE  2
  92
  93 /* mapping command names to cmd chars - see datasheet */
  94 #define BLM_GO_RGB            0
  95 #define BLM_FADE_RGB          1
  96 #define BLM_FADE_HSB          2
  97 #define BLM_FADE_RAND_RGB     3
  98 #define BLM_FADE_RAND_HSB     4
  99 #define BLM_PLAY_SCRIPT       5
 100 #define BLM_STOP_SCRIPT       6
 101 #define BLM_SET_FADE_SPEED    7
 102 #define BLM_SET_TIME_ADJ      8
 103 #define BLM_GET_CUR_RGB       9
 104 #define BLM_WRITE_SCRIPT_LINE 10
 105 #define BLM_READ_SCRIPT_LINE  11
 106 #define BLM_SET_SCRIPT_LR     12        /* Length & Repeats */
 107 #define BLM_SET_ADDR          13
 108 #define BLM_GET_ADDR          14
 109 #define BLM_GET_FW_VER        15
 110 #define BLM_SET_STARTUP_PARAM 16
 111
 112 /* BlinkM Commands
 113  *  as extracted out of the datasheet:
 114  *
 115  *  cmdchar = command (ascii)
 116  *  cmdbyte = command in hex
 117  *  nr_args = number of arguments (to send)
 118  *  nr_ret  = number of return values (to read)
 119  *  dir = direction (0 = read, 1 = write, 2 = both)
 120  *
 121  */
 122 static const struct {
 123         char cmdchar;
 124         u8 cmdbyte;
 125         u8 nr_args;
 126         u8 nr_ret;
 127         u8 dir:2;
 128 } blinkm_cmds[17] = {
 129   /* cmdchar, cmdbyte, nr_args, nr_ret,  dir */
 130         { 'n', 0x6e, 3, 0, 1},
 131         { 'c', 0x63, 3, 0, 1},
 132         { 'h', 0x68, 3, 0, 1},
 133         { 'C', 0x43, 3, 0, 1},
 134         { 'H', 0x48, 3, 0, 1},
 135         { 'p', 0x70, 3, 0, 1},
 136         { 'o', 0x6f, 0, 0, 1},
 137         { 'f', 0x66, 1, 0, 1},
 138         { 't', 0x74, 1, 0, 1},
 139         { 'g', 0x67, 0, 3, 0},
 140         { 'W', 0x57, 7, 0, 1},
 141         { 'R', 0x52, 2, 5, 2},
 142         { 'L', 0x4c, 3, 0, 1},
 143         { 'A', 0x41, 4, 0, 1},
 144         { 'a', 0x61, 0, 1, 0},
 145         { 'Z', 0x5a, 0, 1, 0},
 146         { 'B', 0x42, 5, 0, 1},
 147 };
 148
 149 static ssize_t show_color_common(struct device *dev, char *buf, int color)
 150 {
 151         struct i2c_client *client;
 152         struct blinkm_data *data;
 153         int ret;
 154
 155         client = to_i2c_client(dev);
 156         data = i2c_get_clientdata(client);
 157
 158         ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
 159         if (ret < 0)
 160                 return ret;
 161         switch (color) {
 162         case RED:
 163                 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
 164                 break;
 165         case GREEN:
 166                 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
 167                 break;
 168         case BLUE:
 169                 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
 170                 break;
 171         default:
 172                 return -EINVAL;
 173         }
 174         return -EINVAL;
 175 }
 176
 177 static int store_color_common(struct device *dev, const char *buf, int color)
 178 {
 179         struct i2c_client *client;
 180         struct blinkm_data *data;
 181         int ret;
 182         u8 value;
 183
 184         client = to_i2c_client(dev);
 185         data = i2c_get_clientdata(client);
 186
 187         ret = kstrtou8(buf, 10, &value);
 188         if (ret < 0) {
 189                 dev_err(dev, "BlinkM: value too large!\n");
 190                 return ret;
 191         }
 192
 193         switch (color) {
 194         case RED:
 195                 data->next_red = value;
 196                 break;
 197         case GREEN:
 198                 data->next_green = value;
 199                 break;
 200         case BLUE:
 201                 data->next_blue = value;
 202                 break;
 203         default:
 204                 return -EINVAL;
 205         }
 206
 207         dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
 208                         data->next_red, data->next_green, data->next_blue);
 209
 210         /* if mode ... */
 211         ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 212         if (ret < 0) {
 213                 dev_err(dev, "BlinkM: can't set RGB\n");
 214                 return ret;
 215         }
 216         return 0;
 217 }
 218
 219 static ssize_t show_red(struct device *dev, struct device_attribute *attr,
 220                         char *buf)
 221 {
 222         return show_color_common(dev, buf, RED);
 223 }
 224
 225 static ssize_t store_red(struct device *dev, struct device_attribute *attr,
 226                          const char *buf, size_t count)
 227 {
 228         int ret;
 229
 230         ret = store_color_common(dev, buf, RED);
 231         if (ret < 0)
 232                 return ret;
 233         return count;
 234 }
 235
 236 static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red);
 237
 238 static ssize_t show_green(struct device *dev, struct device_attribute *attr,
 239                           char *buf)
 240 {
 241         return show_color_common(dev, buf, GREEN);
 242 }
 243
 244 static ssize_t store_green(struct device *dev, struct device_attribute *attr,
 245                            const char *buf, size_t count)
 246 {
 247
 248         int ret;
 249
 250         ret = store_color_common(dev, buf, GREEN);
 251         if (ret < 0)
 252                 return ret;
 253         return count;
 254 }
 255
 256 static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green);
 257
 258 static ssize_t show_blue(struct device *dev, struct device_attribute *attr,
 259                          char *buf)
 260 {
 261         return show_color_common(dev, buf, BLUE);
 262 }
 263
 264 static ssize_t store_blue(struct device *dev, struct device_attribute *attr,
 265                           const char *buf, size_t count)
 266 {
 267         int ret;
 268
 269         ret = store_color_common(dev, buf, BLUE);
 270         if (ret < 0)
 271                 return ret;
 272         return count;
 273 }
 274
 275 static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue);
 276
 277 static ssize_t show_test(struct device *dev, struct device_attribute *attr,
 278                          char *buf)
 279 {
 280         return scnprintf(buf, PAGE_SIZE,
 281                          "#Write into test to start test sequence!#\n");
 282 }
 283
 284 static ssize_t store_test(struct device *dev, struct device_attribute *attr,
 285                           const char *buf, size_t count)
 286 {
 287
 288         struct i2c_client *client;
 289         int ret;
 290         client = to_i2c_client(dev);
 291
 292         /*test */
 293         ret = blinkm_test_run(client);
 294         if (ret < 0)
 295                 return ret;
 296
 297         return count;
 298 }
 299
 300 static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test);
 301
 302 /* TODO: HSB, fade, timeadj, script ... */
 303
 304 static struct attribute *blinkm_attrs[] = {
 305         &dev_attr_red.attr,
 306         &dev_attr_green.attr,
 307         &dev_attr_blue.attr,
 308         &dev_attr_test.attr,
 309         NULL,
 310 };
 311
 312 static struct attribute_group blinkm_group = {
 313         .name = "blinkm",
 314         .attrs = blinkm_attrs,
 315 };
 316
 317 static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg)
 318 {
 319         int result;
 320         int i;
 321         int arglen = blinkm_cmds[cmd].nr_args;
 322         /* write out cmd to blinkm - always / default step */
 323         result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
 324         if (result < 0)
 325                 return result;
 326         /* no args to write out */
 327         if (arglen == 0)
 328                 return 0;
 329
 330         for (i = 0; i < arglen; i++) {
 331                 /* repeat for arglen */
 332                 result = i2c_smbus_write_byte(client, arg[i]);
 333                 if (result < 0)
 334                         return result;
 335         }
 336         return 0;
 337 }
 338
 339 static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
 340 {
 341         int result;
 342         int i;
 343         int retlen = blinkm_cmds[cmd].nr_ret;
 344         for (i = 0; i < retlen; i++) {
 345                 /* repeat for retlen */
 346                 result = i2c_smbus_read_byte(client);
 347                 if (result < 0)
 348                         return result;
 349                 arg[i] = result;
 350         }
 351
 352         return 0;
 353 }
 354
 355 static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
 356 {
 357         /* the protocol is simple but non-standard:
 358          * e.g.  cmd 'g' (= 0x67) for "get device address"
 359          * - which defaults to 0x09 - would be the sequence:
 360          *   a) write 0x67 to the device (byte write)
 361          *   b) read the value (0x09) back right after (byte read)
 362          *
 363          * Watch out for "unfinished" sequences (i.e. not enough reads
 364          * or writes after a command. It will make the blinkM misbehave.
 365          * Sequence is key here.
 366          */
 367
 368         /* args / return are in private data struct */
 369         struct blinkm_data *data = i2c_get_clientdata(client);
 370
 371         /* We start hardware transfers which are not to be
 372          * mixed with other commands. Aquire a lock now. */
 373         if (mutex_lock_interruptible(&data->update_lock) < 0)
 374                 return -EAGAIN;
 375
 376         /* switch cmd - usually write before reads */
 377         switch (cmd) {
 378         case BLM_FADE_RAND_RGB:
 379         case BLM_GO_RGB:
 380         case BLM_FADE_RGB:
 381                 data->args[0] = data->next_red;
 382                 data->args[1] = data->next_green;
 383                 data->args[2] = data->next_blue;
 384                 blinkm_write(client, cmd, data->args);
 385                 data->red = data->args[0];
 386                 data->green = data->args[1];
 387                 data->blue = data->args[2];
 388                 break;
 389         case BLM_FADE_HSB:
 390         case BLM_FADE_RAND_HSB:
 391                 data->args[0] = data->next_hue;
 392                 data->args[1] = data->next_saturation;
 393                 data->args[2] = data->next_brightness;
 394                 blinkm_write(client, cmd, data->args);
 395                 data->hue = data->next_hue;
 396                 data->saturation = data->next_saturation;
 397                 data->brightness = data->next_brightness;
 398                 break;
 399         case BLM_PLAY_SCRIPT:
 400                 data->args[0] = data->script_id;
 401                 data->args[1] = data->script_repeats;
 402                 data->args[2] = data->script_startline;
 403                 blinkm_write(client, cmd, data->args);
 404                 break;
 405         case BLM_STOP_SCRIPT:
 406                 blinkm_write(client, cmd, NULL);
 407                 break;
 408         case BLM_GET_CUR_RGB:
 409                 data->args[0] = data->red;
 410                 data->args[1] = data->green;
 411                 data->args[2] = data->blue;
 412                 blinkm_write(client, cmd, NULL);
 413                 blinkm_read(client, cmd, data->args);
 414                 data->red = data->args[0];
 415                 data->green = data->args[1];
 416                 data->blue = data->args[2];
 417                 break;
 418         case BLM_GET_ADDR:
 419                 data->args[0] = data->i2c_addr;
 420                 blinkm_write(client, cmd, NULL);
 421                 blinkm_read(client, cmd, data->args);
 422                 data->i2c_addr = data->args[0];
 423                 break;
 424         case BLM_SET_TIME_ADJ:
 425         case BLM_SET_FADE_SPEED:
 426         case BLM_READ_SCRIPT_LINE:
 427         case BLM_WRITE_SCRIPT_LINE:
 428         case BLM_SET_SCRIPT_LR:
 429         case BLM_SET_ADDR:
 430         case BLM_GET_FW_VER:
 431         case BLM_SET_STARTUP_PARAM:
 432                 dev_err(&client->dev,
 433                                 "BlinkM: cmd %d not implemented yet.\n", cmd);
 434                 break;
 435         default:
 436                 dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
 437                 mutex_unlock(&data->update_lock);
 438                 return -EINVAL;
 439         }                       /* end switch(cmd) */
 440
 441         /* transfers done, unlock */
 442         mutex_unlock(&data->update_lock);
 443         return 0;
 444 }
 445
 446 static void led_work(struct work_struct *work)
 447 {
 448         int ret;
 449         struct blinkm_led *led;
 450         struct blinkm_data *data ;
 451         struct blinkm_work *blm_work = work_to_blmwork(work);
 452
 453         led = blm_work->blinkm_led;
 454         data = i2c_get_clientdata(led->i2c_client);
 455         ret = blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
 456         atomic_dec(&led->active);
 457         dev_dbg(&led->i2c_client->dev,
 458                         "# DONE # next_red = %d, next_green = %d,"
 459                         " next_blue = %d, active = %d\n",
 460                         data->next_red, data->next_green,
 461                         data->next_blue, atomic_read(&led->active));
 462         kfree(blm_work);
 463 }
 464
 465 static int blinkm_led_common_set(struct led_classdev *led_cdev,
 466                                  enum led_brightness value, int color)
 467 {
 468         /* led_brightness is 0, 127 or 255 - we just use it here as-is */
 469         struct blinkm_led *led = cdev_to_blmled(led_cdev);
 470         struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
 471         struct blinkm_work *bl_work;
 472
 473         switch (color) {
 474         case RED:
 475                 /* bail out if there's no change */
 476                 if (data->next_red == (u8) value)
 477                         return 0;
 478                 /* we assume a quite fast sequence here ([off]->on->off)
 479                  * think of network led trigger - we cannot blink that fast, so
 480                  * in case we already have a off->on->off transition queued up,
 481                  * we refuse to queue up more.
 482                  * Revisit: fast-changing brightness. */
 483                 if (atomic_read(&led->active) > 1)
 484                         return 0;
 485                 data->next_red = (u8) value;
 486                 break;
 487         case GREEN:
 488                 /* bail out if there's no change */
 489                 if (data->next_green == (u8) value)
 490                         return 0;
 491                 /* we assume a quite fast sequence here ([off]->on->off)
 492                  * Revisit: fast-changing brightness. */
 493                 if (atomic_read(&led->active) > 1)
 494                         return 0;
 495                 data->next_green = (u8) value;
 496                 break;
 497         case BLUE:
 498                 /* bail out if there's no change */
 499                 if (data->next_blue == (u8) value)
 500                         return 0;
 501                 /* we assume a quite fast sequence here ([off]->on->off)
 502                  * Revisit: fast-changing brightness. */
 503                 if (atomic_read(&led->active) > 1)
 504                         return 0;
 505                 data->next_blue = (u8) value;
 506                 break;
 507
 508         default:
 509                 dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
 510                 return -EINVAL;
 511         }
 512
 513         bl_work = kzalloc(sizeof(*bl_work), GFP_ATOMIC);
 514         if (!bl_work)
 515                 return -ENOMEM;
 516
 517         atomic_inc(&led->active);
 518         dev_dbg(&led->i2c_client->dev,
 519                         "#TO_SCHED# next_red = %d, next_green = %d,"
 520                         " next_blue = %d, active = %d\n",
 521                         data->next_red, data->next_green,
 522                         data->next_blue, atomic_read(&led->active));
 523
 524         /* a fresh work _item_ for each change */
 525         bl_work->blinkm_led = led;
 526         INIT_WORK(&bl_work->work, led_work);
 527         /* queue work in own queue for easy sync on exit*/
 528         schedule_work(&bl_work->work);
 529
 530         return 0;
 531 }
 532
 533 static void blinkm_led_red_set(struct led_classdev *led_cdev,
 534                                enum led_brightness value)
 535 {
 536         blinkm_led_common_set(led_cdev, value, RED);
 537 }
 538
 539 static void blinkm_led_green_set(struct led_classdev *led_cdev,
 540                                  enum led_brightness value)
 541 {
 542         blinkm_led_common_set(led_cdev, value, GREEN);
 543 }
 544
 545 static void blinkm_led_blue_set(struct led_classdev *led_cdev,
 546                                 enum led_brightness value)
 547 {
 548         blinkm_led_common_set(led_cdev, value, BLUE);
 549 }
 550
 551 static void blinkm_init_hw(struct i2c_client *client)
 552 {
 553         int ret;
 554         ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
 555         ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 556 }
 557
 558 static int blinkm_test_run(struct i2c_client *client)
 559 {
 560         int ret;
 561         struct blinkm_data *data = i2c_get_clientdata(client);
 562
 563         data->next_red = 0x01;
 564         data->next_green = 0x05;
 565         data->next_blue = 0x10;
 566         ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 567         if (ret < 0)
 568                 return ret;
 569         msleep(2000);
 570
 571         data->next_red = 0x25;
 572         data->next_green = 0x10;
 573         data->next_blue = 0x31;
 574         ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 575         if (ret < 0)
 576                 return ret;
 577         msleep(2000);
 578
 579         data->next_hue = 0x50;
 580         data->next_saturation = 0x10;
 581         data->next_brightness = 0x20;
 582         ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
 583         if (ret < 0)
 584                 return ret;
 585         msleep(2000);
 586
 587         return 0;
 588 }
 589
 590 /* Return 0 if detection is successful, -ENODEV otherwise */
 591 static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info)
 592 {
 593         struct i2c_adapter *adapter = client->adapter;
 594         int ret;
 595         int count = 99;
 596         u8 tmpargs[7];
 597
 598         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
 599                                      | I2C_FUNC_SMBUS_WORD_DATA
 600                                      | I2C_FUNC_SMBUS_WRITE_BYTE))
 601                 return -ENODEV;
 602
 603         /* Now, we do the remaining detection. Simple for now. */
 604         /* We might need more guards to protect other i2c slaves */
 605
 606         /* make sure the blinkM is balanced (read/writes) */
 607         while (count > 0) {
 608                 ret = blinkm_write(client, BLM_GET_ADDR, NULL);
 609                 usleep_range(5000, 10000);
 610                 ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
 611                 usleep_range(5000, 10000);
 612                 if (tmpargs[0] == 0x09)
 613                         count = 0;
 614                 count--;
 615         }
 616
 617         /* Step 1: Read BlinkM address back  -  cmd_char 'a' */
 618         ret = blinkm_write(client, BLM_GET_ADDR, NULL);
 619         if (ret < 0)
 620                 return ret;
 621         usleep_range(20000, 30000);     /* allow a small delay */
 622         ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
 623         if (ret < 0)
 624                 return ret;
 625
 626         if (tmpargs[0] != 0x09) {
 627                 dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
 628                 return -ENODEV;
 629         }
 630
 631         strlcpy(info->type, "blinkm", I2C_NAME_SIZE);
 632         return 0;
 633 }
 634
 635 static int blinkm_probe(struct i2c_client *client,
 636                         const struct i2c_device_id *id)
 637 {
 638         struct blinkm_data *data;
 639         struct blinkm_led *led[3];
 640         int err, i;
 641         char blinkm_led_name[28];
 642
 643         data = devm_kzalloc(&client->dev,
 644                         sizeof(struct blinkm_data), GFP_KERNEL);
 645         if (!data) {
 646                 err = -ENOMEM;
 647                 goto exit;
 648         }
 649
 650         data->i2c_addr = 0x09;
 651         data->i2c_addr = 0x08;
 652         /* i2c addr  - use fake addr of 0x08 initially (real is 0x09) */
 653         data->fw_ver = 0xfe;
 654         /* firmware version - use fake until we read real value
 655          * (currently broken - BlinkM confused!) */
 656         data->script_id = 0x01;
 657         data->i2c_client = client;
 658
 659         i2c_set_clientdata(client, data);
 660         mutex_init(&data->update_lock);
 661
 662         /* Register sysfs hooks */
 663         err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
 664         if (err < 0) {
 665                 dev_err(&client->dev, "couldn't register sysfs group\n");
 666                 goto exit;
 667         }
 668
 669         for (i = 0; i < 3; i++) {
 670                 /* RED = 0, GREEN = 1, BLUE = 2 */
 671                 led[i] = &data->blinkm_leds[i];
 672                 led[i]->i2c_client = client;
 673                 led[i]->id = i;
 674                 led[i]->led_cdev.max_brightness = 255;
 675                 led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
 676                 atomic_set(&led[i]->active, 0);
 677                 switch (i) {
 678                 case RED:
 679                         snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 680                                          "blinkm-%d-%d-red",
 681                                          client->adapter->nr,
 682                                          client->addr);
 683                         led[i]->led_cdev.name = blinkm_led_name;
 684                         led[i]->led_cdev.brightness_set = blinkm_led_red_set;
 685                         err = led_classdev_register(&client->dev,
 686                                                     &led[i]->led_cdev);
 687                         if (err < 0) {
 688                                 dev_err(&client->dev,
 689                                         "couldn't register LED %s\n",
 690                                         led[i]->led_cdev.name);
 691                                 goto failred;
 692                         }
 693                         break;
 694                 case GREEN:
 695                         snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 696                                          "blinkm-%d-%d-green",
 697                                          client->adapter->nr,
 698                                          client->addr);
 699                         led[i]->led_cdev.name = blinkm_led_name;
 700                         led[i]->led_cdev.brightness_set = blinkm_led_green_set;
 701                         err = led_classdev_register(&client->dev,
 702                                                     &led[i]->led_cdev);
 703                         if (err < 0) {
 704                                 dev_err(&client->dev,
 705                                         "couldn't register LED %s\n",
 706                                         led[i]->led_cdev.name);
 707                                 goto failgreen;
 708                         }
 709                         break;
 710                 case BLUE:
 711                         snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 712                                          "blinkm-%d-%d-blue",
 713                                          client->adapter->nr,
 714                                          client->addr);
 715                         led[i]->led_cdev.name = blinkm_led_name;
 716                         led[i]->led_cdev.brightness_set = blinkm_led_blue_set;
 717                         err = led_classdev_register(&client->dev,
 718                                                     &led[i]->led_cdev);
 719                         if (err < 0) {
 720                                 dev_err(&client->dev,
 721                                         "couldn't register LED %s\n",
 722                                         led[i]->led_cdev.name);
 723                                 goto failblue;
 724                         }
 725                         break;
 726                 }               /* end switch */
 727         }                       /* end for */
 728
 729         /* Initialize the blinkm */
 730         blinkm_init_hw(client);
 731
 732         return 0;
 733
 734 failblue:
 735         led_classdev_unregister(&led[GREEN]->led_cdev);
 736
 737 failgreen:
 738         led_classdev_unregister(&led[RED]->led_cdev);
 739
 740 failred:
 741         sysfs_remove_group(&client->dev.kobj, &blinkm_group);
 742 exit:
 743         return err;
 744 }
 745
 746 static int blinkm_remove(struct i2c_client *client)
 747 {
 748         struct blinkm_data *data = i2c_get_clientdata(client);
 749         int ret = 0;
 750         int i;
 751
 752         /* make sure no workqueue entries are pending */
 753         for (i = 0; i < 3; i++) {
 754                 flush_scheduled_work();
 755                 led_classdev_unregister(&data->blinkm_leds[i].led_cdev);
 756         }
 757
 758         /* reset rgb */
 759         data->next_red = 0x00;
 760         data->next_green = 0x00;
 761         data->next_blue = 0x00;
 762         ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 763         if (ret < 0)
 764                 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
 765
 766         /* reset hsb */
 767         data->next_hue = 0x00;
 768         data->next_saturation = 0x00;
 769         data->next_brightness = 0x00;
 770         ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
 771         if (ret < 0)
 772                 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
 773
 774         /* red fade to off */
 775         data->next_red = 0xff;
 776         ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 777         if (ret < 0)
 778                 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
 779
 780         /* off */
 781         data->next_red = 0x00;
 782         ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 783         if (ret < 0)
 784                 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
 785
 786         sysfs_remove_group(&client->dev.kobj, &blinkm_group);
 787         return 0;
 788 }
 789
 790 static const struct i2c_device_id blinkm_id[] = {
 791         {"blinkm", 0},
 792         {}
 793 };
 794
 795 MODULE_DEVICE_TABLE(i2c, blinkm_id);
 796
 797   /* This is the driver that will be inserted */
 798 static struct i2c_driver blinkm_driver = {
 799         .class = I2C_CLASS_HWMON,
 800         .driver = {
 801                    .name = "blinkm",
 802                    },
 803         .probe = blinkm_probe,
 804         .remove = blinkm_remove,
 805         .id_table = blinkm_id,
 806         .detect = blinkm_detect,
 807         .address_list = normal_i2c,
 808 };
 809
 810 module_i2c_driver(blinkm_driver);
 811
 812 MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
 813 MODULE_DESCRIPTION("BlinkM RGB LED driver");
 814 MODULE_LICENSE("GPL");
 815