2 * drivers/mtd/nand/fsmc_nand.c
5 * Flexible Static Memory Controller (FSMC)
6 * Driver for NAND portions
8 * Copyright © 2010 ST Microelectronics
9 * Vipin Kumar <vipin.kumar@st.com>
12 * Based on drivers/mtd/nand/nomadik_nand.c
14 * This file is licensed under the terms of the GNU General Public
15 * License version 2. This program is licensed "as is" without any
16 * warranty of any kind, whether express or implied.
19 #include <linux/clk.h>
20 #include <linux/completion.h>
21 #include <linux/dmaengine.h>
22 #include <linux/dma-direction.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/err.h>
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/resource.h>
28 #include <linux/sched.h>
29 #include <linux/types.h>
30 #include <linux/mtd/mtd.h>
31 #include <linux/mtd/nand.h>
32 #include <linux/mtd/nand_ecc.h>
33 #include <linux/platform_device.h>
35 #include <linux/mtd/partitions.h>
37 #include <linux/slab.h>
38 #include <linux/amba/bus.h>
39 #include <mtd/mtd-abi.h>
41 /* fsmc controller registers for NOR flash */
43 /* ctrl register definitions */
44 #define BANK_ENABLE (1 << 0)
45 #define MUXED (1 << 1)
46 #define NOR_DEV (2 << 2)
47 #define WIDTH_8 (0 << 4)
48 #define WIDTH_16 (1 << 4)
49 #define RSTPWRDWN (1 << 6)
50 #define WPROT (1 << 7)
51 #define WRT_ENABLE (1 << 12)
52 #define WAIT_ENB (1 << 13)
55 /* ctrl_tim register definitions */
57 #define FSMC_NOR_BANK_SZ 0x8
58 #define FSMC_NOR_REG_SIZE 0x40
60 #define FSMC_NOR_REG(base, bank, reg) (base + \
61 FSMC_NOR_BANK_SZ * (bank) + \
64 /* fsmc controller registers for NAND flash */
66 /* pc register definitions */
67 #define FSMC_RESET (1 << 0)
68 #define FSMC_WAITON (1 << 1)
69 #define FSMC_ENABLE (1 << 2)
70 #define FSMC_DEVTYPE_NAND (1 << 3)
71 #define FSMC_DEVWID_8 (0 << 4)
72 #define FSMC_DEVWID_16 (1 << 4)
73 #define FSMC_ECCEN (1 << 6)
74 #define FSMC_ECCPLEN_512 (0 << 7)
75 #define FSMC_ECCPLEN_256 (1 << 7)
76 #define FSMC_TCLR_1 (1)
77 #define FSMC_TCLR_SHIFT (9)
78 #define FSMC_TCLR_MASK (0xF)
79 #define FSMC_TAR_1 (1)
80 #define FSMC_TAR_SHIFT (13)
81 #define FSMC_TAR_MASK (0xF)
83 /* sts register definitions */
84 #define FSMC_CODE_RDY (1 << 15)
86 /* comm register definitions */
88 #define FSMC_TSET_SHIFT 0
89 #define FSMC_TSET_MASK 0xFF
90 #define FSMC_TWAIT_6 6
91 #define FSMC_TWAIT_SHIFT 8
92 #define FSMC_TWAIT_MASK 0xFF
93 #define FSMC_THOLD_4 4
94 #define FSMC_THOLD_SHIFT 16
95 #define FSMC_THOLD_MASK 0xFF
97 #define FSMC_THIZ_SHIFT 24
98 #define FSMC_THIZ_MASK 0xFF
104 #define FSMC_NAND_BANK_SZ 0x20
106 #define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \
107 (FSMC_NAND_BANK_SZ * (bank)) + \
110 #define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
112 struct fsmc_nand_timings {
127 * struct fsmc_nand_data - structure for FSMC NAND device state
129 * @pid: Part ID on the AMBA PrimeCell format
130 * @mtd: MTD info for a NAND flash.
131 * @nand: Chip related info for a NAND flash.
132 * @partitions: Partition info for a NAND Flash.
133 * @nr_partitions: Total number of partition of a NAND flash.
135 * @bank: Bank number for probed device.
136 * @clk: Clock structure for FSMC.
138 * @read_dma_chan: DMA channel for read access
139 * @write_dma_chan: DMA channel for write access to NAND
140 * @dma_access_complete: Completion structure
142 * @data_pa: NAND Physical port for Data.
143 * @data_va: NAND port for Data.
144 * @cmd_va: NAND port for Command.
145 * @addr_va: NAND port for Address.
146 * @regs_va: FSMC regs base address.
148 struct fsmc_nand_data {
150 struct nand_chip nand;
154 enum access_mode mode;
157 /* DMA related objects */
158 struct dma_chan *read_dma_chan;
159 struct dma_chan *write_dma_chan;
160 struct completion dma_access_complete;
162 struct fsmc_nand_timings *dev_timings;
165 void __iomem *data_va;
166 void __iomem *cmd_va;
167 void __iomem *addr_va;
168 void __iomem *regs_va;
171 static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
172 struct mtd_oob_region *oobregion)
174 struct nand_chip *chip = mtd_to_nand(mtd);
176 if (section >= chip->ecc.steps)
179 oobregion->offset = (section * 16) + 2;
180 oobregion->length = 3;
185 static int fsmc_ecc1_ooblayout_free(struct mtd_info *mtd, int section,
186 struct mtd_oob_region *oobregion)
188 struct nand_chip *chip = mtd_to_nand(mtd);
190 if (section >= chip->ecc.steps)
193 oobregion->offset = (section * 16) + 8;
195 if (section < chip->ecc.steps - 1)
196 oobregion->length = 8;
198 oobregion->length = mtd->oobsize - oobregion->offset;
203 static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = {
204 .ecc = fsmc_ecc1_ooblayout_ecc,
205 .free = fsmc_ecc1_ooblayout_free,
209 * ECC placement definitions in oobfree type format.
210 * There are 13 bytes of ecc for every 512 byte block and it has to be read
211 * consecutively and immediately after the 512 byte data block for hardware to
212 * generate the error bit offsets in 512 byte data.
214 static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section,
215 struct mtd_oob_region *oobregion)
217 struct nand_chip *chip = mtd_to_nand(mtd);
219 if (section >= chip->ecc.steps)
222 oobregion->length = chip->ecc.bytes;
224 if (!section && mtd->writesize <= 512)
225 oobregion->offset = 0;
227 oobregion->offset = (section * 16) + 2;
232 static int fsmc_ecc4_ooblayout_free(struct mtd_info *mtd, int section,
233 struct mtd_oob_region *oobregion)
235 struct nand_chip *chip = mtd_to_nand(mtd);
237 if (section >= chip->ecc.steps)
240 oobregion->offset = (section * 16) + 15;
242 if (section < chip->ecc.steps - 1)
243 oobregion->length = 3;
245 oobregion->length = mtd->oobsize - oobregion->offset;
250 static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = {
251 .ecc = fsmc_ecc4_ooblayout_ecc,
252 .free = fsmc_ecc4_ooblayout_free,
255 static inline struct fsmc_nand_data *mtd_to_fsmc(struct mtd_info *mtd)
257 return container_of(mtd_to_nand(mtd), struct fsmc_nand_data, nand);
261 * fsmc_cmd_ctrl - For facilitaing Hardware access
262 * This routine allows hardware specific access to control-lines(ALE,CLE)
264 static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
266 struct nand_chip *this = mtd_to_nand(mtd);
267 struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
268 void __iomem *regs = host->regs_va;
269 unsigned int bank = host->bank;
271 if (ctrl & NAND_CTRL_CHANGE) {
274 if (ctrl & NAND_CLE) {
275 this->IO_ADDR_R = host->cmd_va;
276 this->IO_ADDR_W = host->cmd_va;
277 } else if (ctrl & NAND_ALE) {
278 this->IO_ADDR_R = host->addr_va;
279 this->IO_ADDR_W = host->addr_va;
281 this->IO_ADDR_R = host->data_va;
282 this->IO_ADDR_W = host->data_va;
285 pc = readl(FSMC_NAND_REG(regs, bank, PC));
290 writel_relaxed(pc, FSMC_NAND_REG(regs, bank, PC));
295 if (cmd != NAND_CMD_NONE)
296 writeb_relaxed(cmd, this->IO_ADDR_W);
300 * fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
302 * This routine initializes timing parameters related to NAND memory access in
305 static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
306 uint32_t busw, struct fsmc_nand_timings *timings)
308 uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
309 uint32_t tclr, tar, thiz, thold, twait, tset;
310 struct fsmc_nand_timings *tims;
311 struct fsmc_nand_timings default_timings = {
315 .thold = FSMC_THOLD_4,
316 .twait = FSMC_TWAIT_6,
323 tims = &default_timings;
325 tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT;
326 tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT;
327 thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT;
328 thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT;
329 twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT;
330 tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
333 writel_relaxed(value | FSMC_DEVWID_16,
334 FSMC_NAND_REG(regs, bank, PC));
336 writel_relaxed(value | FSMC_DEVWID_8,
337 FSMC_NAND_REG(regs, bank, PC));
339 writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar,
340 FSMC_NAND_REG(regs, bank, PC));
341 writel_relaxed(thiz | thold | twait | tset,
342 FSMC_NAND_REG(regs, bank, COMM));
343 writel_relaxed(thiz | thold | twait | tset,
344 FSMC_NAND_REG(regs, bank, ATTRIB));
348 * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
350 static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
352 struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
353 void __iomem *regs = host->regs_va;
354 uint32_t bank = host->bank;
356 writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256,
357 FSMC_NAND_REG(regs, bank, PC));
358 writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN,
359 FSMC_NAND_REG(regs, bank, PC));
360 writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN,
361 FSMC_NAND_REG(regs, bank, PC));
365 * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
366 * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
369 static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
372 struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
373 void __iomem *regs = host->regs_va;
374 uint32_t bank = host->bank;
376 unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
379 if (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY)
383 } while (!time_after_eq(jiffies, deadline));
385 if (time_after_eq(jiffies, deadline)) {
386 dev_err(host->dev, "calculate ecc timed out\n");
390 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
391 ecc[0] = (uint8_t) (ecc_tmp >> 0);
392 ecc[1] = (uint8_t) (ecc_tmp >> 8);
393 ecc[2] = (uint8_t) (ecc_tmp >> 16);
394 ecc[3] = (uint8_t) (ecc_tmp >> 24);
396 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
397 ecc[4] = (uint8_t) (ecc_tmp >> 0);
398 ecc[5] = (uint8_t) (ecc_tmp >> 8);
399 ecc[6] = (uint8_t) (ecc_tmp >> 16);
400 ecc[7] = (uint8_t) (ecc_tmp >> 24);
402 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
403 ecc[8] = (uint8_t) (ecc_tmp >> 0);
404 ecc[9] = (uint8_t) (ecc_tmp >> 8);
405 ecc[10] = (uint8_t) (ecc_tmp >> 16);
406 ecc[11] = (uint8_t) (ecc_tmp >> 24);
408 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
409 ecc[12] = (uint8_t) (ecc_tmp >> 16);
415 * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
416 * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
419 static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
422 struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
423 void __iomem *regs = host->regs_va;
424 uint32_t bank = host->bank;
427 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
428 ecc[0] = (uint8_t) (ecc_tmp >> 0);
429 ecc[1] = (uint8_t) (ecc_tmp >> 8);
430 ecc[2] = (uint8_t) (ecc_tmp >> 16);
435 /* Count the number of 0's in buff upto a max of max_bits */
436 static int count_written_bits(uint8_t *buff, int size, int max_bits)
438 int k, written_bits = 0;
440 for (k = 0; k < size; k++) {
441 written_bits += hweight8(~buff[k]);
442 if (written_bits > max_bits)
449 static void dma_complete(void *param)
451 struct fsmc_nand_data *host = param;
453 complete(&host->dma_access_complete);
456 static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len,
457 enum dma_data_direction direction)
459 struct dma_chan *chan;
460 struct dma_device *dma_dev;
461 struct dma_async_tx_descriptor *tx;
462 dma_addr_t dma_dst, dma_src, dma_addr;
464 unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
466 unsigned long time_left;
468 if (direction == DMA_TO_DEVICE)
469 chan = host->write_dma_chan;
470 else if (direction == DMA_FROM_DEVICE)
471 chan = host->read_dma_chan;
475 dma_dev = chan->device;
476 dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction);
478 if (direction == DMA_TO_DEVICE) {
480 dma_dst = host->data_pa;
482 dma_src = host->data_pa;
486 tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src,
489 dev_err(host->dev, "device_prep_dma_memcpy error\n");
494 tx->callback = dma_complete;
495 tx->callback_param = host;
496 cookie = tx->tx_submit(tx);
498 ret = dma_submit_error(cookie);
500 dev_err(host->dev, "dma_submit_error %d\n", cookie);
504 dma_async_issue_pending(chan);
507 wait_for_completion_timeout(&host->dma_access_complete,
508 msecs_to_jiffies(3000));
509 if (time_left == 0) {
510 dmaengine_terminate_all(chan);
511 dev_err(host->dev, "wait_for_completion_timeout\n");
519 dma_unmap_single(dma_dev->dev, dma_addr, len, direction);
525 * fsmc_write_buf - write buffer to chip
526 * @mtd: MTD device structure
528 * @len: number of bytes to write
530 static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
533 struct nand_chip *chip = mtd_to_nand(mtd);
535 if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
536 IS_ALIGNED(len, sizeof(uint32_t))) {
537 uint32_t *p = (uint32_t *)buf;
539 for (i = 0; i < len; i++)
540 writel_relaxed(p[i], chip->IO_ADDR_W);
542 for (i = 0; i < len; i++)
543 writeb_relaxed(buf[i], chip->IO_ADDR_W);
548 * fsmc_read_buf - read chip data into buffer
549 * @mtd: MTD device structure
550 * @buf: buffer to store date
551 * @len: number of bytes to read
553 static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
556 struct nand_chip *chip = mtd_to_nand(mtd);
558 if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
559 IS_ALIGNED(len, sizeof(uint32_t))) {
560 uint32_t *p = (uint32_t *)buf;
562 for (i = 0; i < len; i++)
563 p[i] = readl_relaxed(chip->IO_ADDR_R);
565 for (i = 0; i < len; i++)
566 buf[i] = readb_relaxed(chip->IO_ADDR_R);
571 * fsmc_read_buf_dma - read chip data into buffer
572 * @mtd: MTD device structure
573 * @buf: buffer to store date
574 * @len: number of bytes to read
576 static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len)
578 struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
580 dma_xfer(host, buf, len, DMA_FROM_DEVICE);
584 * fsmc_write_buf_dma - write buffer to chip
585 * @mtd: MTD device structure
587 * @len: number of bytes to write
589 static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
592 struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
594 dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE);
598 * fsmc_read_page_hwecc
599 * @mtd: mtd info structure
600 * @chip: nand chip info structure
601 * @buf: buffer to store read data
602 * @oob_required: caller expects OOB data read to chip->oob_poi
603 * @page: page number to read
605 * This routine is needed for fsmc version 8 as reading from NAND chip has to be
606 * performed in a strict sequence as follows:
607 * data(512 byte) -> ecc(13 byte)
608 * After this read, fsmc hardware generates and reports error data bits(up to a
611 static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
612 uint8_t *buf, int oob_required, int page)
614 int i, j, s, stat, eccsize = chip->ecc.size;
615 int eccbytes = chip->ecc.bytes;
616 int eccsteps = chip->ecc.steps;
618 uint8_t *ecc_calc = chip->buffers->ecccalc;
619 uint8_t *ecc_code = chip->buffers->ecccode;
620 int off, len, group = 0;
622 * ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
623 * end up reading 14 bytes (7 words) from oob. The local array is
624 * to maintain word alignment
627 uint8_t *oob = (uint8_t *)&ecc_oob[0];
628 unsigned int max_bitflips = 0;
630 for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
631 chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
632 chip->ecc.hwctl(mtd, NAND_ECC_READ);
633 chip->read_buf(mtd, p, eccsize);
635 for (j = 0; j < eccbytes;) {
636 struct mtd_oob_region oobregion;
639 ret = mtd_ooblayout_ecc(mtd, group++, &oobregion);
643 off = oobregion.offset;
644 len = oobregion.length;
647 * length is intentionally kept a higher multiple of 2
648 * to read at least 13 bytes even in case of 16 bit NAND
651 if (chip->options & NAND_BUSWIDTH_16)
652 len = roundup(len, 2);
654 chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
655 chip->read_buf(mtd, oob + j, len);
659 memcpy(&ecc_code[i], oob, chip->ecc.bytes);
660 chip->ecc.calculate(mtd, p, &ecc_calc[i]);
662 stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
664 mtd->ecc_stats.failed++;
666 mtd->ecc_stats.corrected += stat;
667 max_bitflips = max_t(unsigned int, max_bitflips, stat);
675 * fsmc_bch8_correct_data
676 * @mtd: mtd info structure
677 * @dat: buffer of read data
678 * @read_ecc: ecc read from device spare area
679 * @calc_ecc: ecc calculated from read data
681 * calc_ecc is a 104 bit information containing maximum of 8 error
682 * offset informations of 13 bits each in 512 bytes of read data.
684 static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat,
685 uint8_t *read_ecc, uint8_t *calc_ecc)
687 struct nand_chip *chip = mtd_to_nand(mtd);
688 struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
689 void __iomem *regs = host->regs_va;
690 unsigned int bank = host->bank;
693 uint32_t ecc1, ecc2, ecc3, ecc4;
695 num_err = (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF;
697 /* no bit flipping */
698 if (likely(num_err == 0))
701 /* too many errors */
702 if (unlikely(num_err > 8)) {
704 * This is a temporary erase check. A newly erased page read
705 * would result in an ecc error because the oob data is also
706 * erased to FF and the calculated ecc for an FF data is not
708 * This is a workaround to skip performing correction in case
712 * For every page, each bit written as 0 is counted until these
713 * number of bits are greater than 8 (the maximum correction
714 * capability of FSMC for each 512 + 13 bytes)
717 int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8);
718 int bits_data = count_written_bits(dat, chip->ecc.size, 8);
720 if ((bits_ecc + bits_data) <= 8) {
722 memset(dat, 0xff, chip->ecc.size);
730 * ------------------- calc_ecc[] bit wise -----------|--13 bits--|
731 * |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
733 * calc_ecc is a 104 bit information containing maximum of 8 error
734 * offset informations of 13 bits each. calc_ecc is copied into a
735 * uint64_t array and error offset indexes are populated in err_idx
738 ecc1 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
739 ecc2 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
740 ecc3 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
741 ecc4 = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
743 err_idx[0] = (ecc1 >> 0) & 0x1FFF;
744 err_idx[1] = (ecc1 >> 13) & 0x1FFF;
745 err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
746 err_idx[3] = (ecc2 >> 7) & 0x1FFF;
747 err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
748 err_idx[5] = (ecc3 >> 1) & 0x1FFF;
749 err_idx[6] = (ecc3 >> 14) & 0x1FFF;
750 err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);
754 change_bit(0, (unsigned long *)&err_idx[i]);
755 change_bit(1, (unsigned long *)&err_idx[i]);
757 if (err_idx[i] < chip->ecc.size * 8) {
758 change_bit(err_idx[i], (unsigned long *)dat);
765 static bool filter(struct dma_chan *chan, void *slave)
767 chan->private = slave;
771 static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
772 struct fsmc_nand_data *host,
773 struct nand_chip *nand)
775 struct device_node *np = pdev->dev.of_node;
781 if (!of_property_read_u32(np, "bank-width", &val)) {
783 nand->options |= NAND_BUSWIDTH_16;
784 } else if (val != 1) {
785 dev_err(&pdev->dev, "invalid bank-width %u\n", val);
790 if (of_get_property(np, "nand-skip-bbtscan", NULL))
791 nand->options |= NAND_SKIP_BBTSCAN;
793 host->dev_timings = devm_kzalloc(&pdev->dev,
794 sizeof(*host->dev_timings), GFP_KERNEL);
795 if (!host->dev_timings)
797 ret = of_property_read_u8_array(np, "timings", (u8 *)host->dev_timings,
798 sizeof(*host->dev_timings));
800 dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n");
801 host->dev_timings = NULL;
804 /* Set default NAND bank to 0 */
806 if (!of_property_read_u32(np, "bank", &val)) {
808 dev_err(&pdev->dev, "invalid bank %u\n", val);
817 * fsmc_nand_probe - Probe function
818 * @pdev: platform device structure
820 static int __init fsmc_nand_probe(struct platform_device *pdev)
822 struct fsmc_nand_data *host;
823 struct mtd_info *mtd;
824 struct nand_chip *nand;
825 struct resource *res;
831 /* Allocate memory for the device structure (and zero it) */
832 host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
838 ret = fsmc_nand_probe_config_dt(pdev, host, nand);
842 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
843 host->data_va = devm_ioremap_resource(&pdev->dev, res);
844 if (IS_ERR(host->data_va))
845 return PTR_ERR(host->data_va);
847 host->data_pa = (dma_addr_t)res->start;
849 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
850 host->addr_va = devm_ioremap_resource(&pdev->dev, res);
851 if (IS_ERR(host->addr_va))
852 return PTR_ERR(host->addr_va);
854 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
855 host->cmd_va = devm_ioremap_resource(&pdev->dev, res);
856 if (IS_ERR(host->cmd_va))
857 return PTR_ERR(host->cmd_va);
859 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
860 host->regs_va = devm_ioremap_resource(&pdev->dev, res);
861 if (IS_ERR(host->regs_va))
862 return PTR_ERR(host->regs_va);
864 host->clk = devm_clk_get(&pdev->dev, NULL);
865 if (IS_ERR(host->clk)) {
866 dev_err(&pdev->dev, "failed to fetch block clock\n");
867 return PTR_ERR(host->clk);
870 ret = clk_prepare_enable(host->clk);
875 * This device ID is actually a common AMBA ID as used on the
876 * AMBA PrimeCell bus. However it is not a PrimeCell.
878 for (pid = 0, i = 0; i < 4; i++)
879 pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8);
881 dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, "
882 "revision %02x, config %02x\n",
883 AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
884 AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
886 host->dev = &pdev->dev;
888 if (host->mode == USE_DMA_ACCESS)
889 init_completion(&host->dma_access_complete);
891 /* Link all private pointers */
892 mtd = nand_to_mtd(&host->nand);
893 nand_set_controller_data(nand, host);
894 nand_set_flash_node(nand, pdev->dev.of_node);
896 mtd->dev.parent = &pdev->dev;
897 nand->IO_ADDR_R = host->data_va;
898 nand->IO_ADDR_W = host->data_va;
899 nand->cmd_ctrl = fsmc_cmd_ctrl;
900 nand->chip_delay = 30;
903 * Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
904 * can overwrite this value if the DT provides a different value.
906 nand->ecc.mode = NAND_ECC_HW;
907 nand->ecc.hwctl = fsmc_enable_hwecc;
908 nand->ecc.size = 512;
909 nand->badblockbits = 7;
911 switch (host->mode) {
914 dma_cap_set(DMA_MEMCPY, mask);
915 host->read_dma_chan = dma_request_channel(mask, filter, NULL);
916 if (!host->read_dma_chan) {
917 dev_err(&pdev->dev, "Unable to get read dma channel\n");
918 goto err_req_read_chnl;
920 host->write_dma_chan = dma_request_channel(mask, filter, NULL);
921 if (!host->write_dma_chan) {
922 dev_err(&pdev->dev, "Unable to get write dma channel\n");
923 goto err_req_write_chnl;
925 nand->read_buf = fsmc_read_buf_dma;
926 nand->write_buf = fsmc_write_buf_dma;
930 case USE_WORD_ACCESS:
931 nand->read_buf = fsmc_read_buf;
932 nand->write_buf = fsmc_write_buf;
936 fsmc_nand_setup(host->regs_va, host->bank,
937 nand->options & NAND_BUSWIDTH_16,
940 if (AMBA_REV_BITS(host->pid) >= 8) {
941 nand->ecc.read_page = fsmc_read_page_hwecc;
942 nand->ecc.calculate = fsmc_read_hwecc_ecc4;
943 nand->ecc.correct = fsmc_bch8_correct_data;
944 nand->ecc.bytes = 13;
945 nand->ecc.strength = 8;
949 * Scan to find existence of the device
951 ret = nand_scan_ident(mtd, 1, NULL);
953 dev_err(&pdev->dev, "No NAND Device found!\n");
957 if (AMBA_REV_BITS(host->pid) >= 8) {
958 switch (mtd->oobsize) {
966 dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
972 mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops);
974 switch (nand->ecc.mode) {
976 dev_info(&pdev->dev, "Using 1-bit HW ECC scheme\n");
977 nand->ecc.calculate = fsmc_read_hwecc_ecc1;
978 nand->ecc.correct = nand_correct_data;
980 nand->ecc.strength = 1;
984 if (nand->ecc.algo == NAND_ECC_BCH) {
985 dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
990 dev_err(&pdev->dev, "Unsupported ECC mode!\n");
995 * Don't set layout for BCH4 SW ECC. This will be
996 * generated later in nand_bch_init() later.
998 if (nand->ecc.mode == NAND_ECC_HW) {
999 switch (mtd->oobsize) {
1003 mtd_set_ooblayout(mtd,
1004 &fsmc_ecc1_ooblayout_ops);
1007 dev_warn(&pdev->dev,
1008 "No oob scheme defined for oobsize %d\n",
1016 /* Second stage of scan to fill MTD data-structures */
1017 ret = nand_scan_tail(mtd);
1022 ret = mtd_device_register(mtd, NULL, 0);
1026 platform_set_drvdata(pdev, host);
1027 dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
1032 if (host->mode == USE_DMA_ACCESS)
1033 dma_release_channel(host->write_dma_chan);
1035 if (host->mode == USE_DMA_ACCESS)
1036 dma_release_channel(host->read_dma_chan);
1038 clk_disable_unprepare(host->clk);
1045 static int fsmc_nand_remove(struct platform_device *pdev)
1047 struct fsmc_nand_data *host = platform_get_drvdata(pdev);
1050 nand_release(nand_to_mtd(&host->nand));
1052 if (host->mode == USE_DMA_ACCESS) {
1053 dma_release_channel(host->write_dma_chan);
1054 dma_release_channel(host->read_dma_chan);
1056 clk_disable_unprepare(host->clk);
1062 #ifdef CONFIG_PM_SLEEP
1063 static int fsmc_nand_suspend(struct device *dev)
1065 struct fsmc_nand_data *host = dev_get_drvdata(dev);
1067 clk_disable_unprepare(host->clk);
1071 static int fsmc_nand_resume(struct device *dev)
1073 struct fsmc_nand_data *host = dev_get_drvdata(dev);
1075 clk_prepare_enable(host->clk);
1076 fsmc_nand_setup(host->regs_va, host->bank,
1077 host->nand.options & NAND_BUSWIDTH_16,
1084 static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
1086 static const struct of_device_id fsmc_nand_id_table[] = {
1087 { .compatible = "st,spear600-fsmc-nand" },
1088 { .compatible = "stericsson,fsmc-nand" },
1091 MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);
1093 static struct platform_driver fsmc_nand_driver = {
1094 .remove = fsmc_nand_remove,
1096 .name = "fsmc-nand",
1097 .of_match_table = fsmc_nand_id_table,
1098 .pm = &fsmc_nand_pm_ops,
1102 module_platform_driver_probe(fsmc_nand_driver, fsmc_nand_probe);
1104 MODULE_LICENSE("GPL");
1105 MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
1106 MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");