]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/net/ax88796.h
net: Add support AX88796L ethernet device
[karo-tx-uboot.git] / drivers / net / ax88796.h
1 /*
2  * AX88796L(NE2000) support
3  *
4  * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License as
8  * published by the Free Software Foundation; either version 2 of
9  * the License, or (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
19  * MA 02111-1307 USA
20  *
21  */
22
23 #ifndef __DRIVERS_AX88796L_H__
24 #define __DRIVERS_AX88796L_H__
25
26 #define DP_DATA     (0x10 << 1)
27 #define START_PG    0x40    /* First page of TX buffer */
28 #define START_PG2   0x48
29 #define STOP_PG     0x80    /* Last page +1 of RX ring */
30 #define TX_PAGES    12
31 #define RX_START    (START_PG+TX_PAGES)
32 #define RX_END      STOP_PG
33
34 #define AX88796L_BASE_ADDRESS   CONFIG_DRIVER_NE2000_BASE
35 #define AX88796L_BYTE_ACCESS    0x00001000
36 #define AX88796L_OFFSET         0x00000400
37 #define AX88796L_ADDRESS_BYTE   AX88796L_BASE_ADDRESS + \
38                 AX88796L_BYTE_ACCESS + AX88796L_OFFSET
39 #define AX88796L_REG_MEMR       AX88796L_ADDRESS_BYTE + (0x14<<1)
40 #define AX88796L_REG_CR         AX88796L_ADDRESS_BYTE + (0x00<<1)
41
42 #define AX88796L_CR             (*(vu_short *)(AX88796L_REG_CR))
43 #define AX88796L_MEMR   (*(vu_short *)(AX88796L_REG_MEMR))
44
45 #define EECS_HIGH               (AX88796L_MEMR |= 0x10)
46 #define EECS_LOW                (AX88796L_MEMR &= 0xef)
47 #define EECLK_HIGH              (AX88796L_MEMR |= 0x80)
48 #define EECLK_LOW               (AX88796L_MEMR &= 0x7f)
49 #define EEDI_HIGH               (AX88796L_MEMR |= 0x20)
50 #define EEDI_LOW                (AX88796L_MEMR &= 0xdf)
51 #define EEDO                    ((AX88796L_MEMR & 0x40)>>6)
52
53 #define PAGE0_SET               (AX88796L_CR &= 0x3f)
54 #define PAGE1_SET               (AX88796L_CR = (AX88796L_CR & 0x3f) | 0x40)
55
56 #define BIT_DUMMY               0
57 #define MAC_EEP_READ    1
58 #define MAC_EEP_WRITE   2
59 #define MAC_EEP_ERACE   3
60 #define MAC_EEP_EWEN    4
61 #define MAC_EEP_EWDS    5
62
63 /* R7780MP Specific code */
64 #if defined(CONFIG_R7780MP)
65 #define ISA_OFFSET  0x1400
66 #define DP_IN(_b_, _o_, _d_)  (_d_) = \
67         *( (vu_short *) ((_b_) + ((_o_) * 2) + ISA_OFFSET))
68 #define DP_OUT(_b_, _o_, _d_) \
69         *((vu_short *)((_b_) + ((_o_) * 2) + ISA_OFFSET)) = (_d_)
70 #define DP_IN_DATA(_b_, _d_)  (_d_) = *( (vu_short *) ((_b_) + ISA_OFFSET))
71 #define DP_OUT_DATA(_b_, _d_) *( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
72 #else
73 /* Please change for your target boards */
74 #define ISA_OFFSET  0x0000
75 #define DP_IN(_b_, _o_, _d_)  (_d_) = *( (vu_short *)((_b_)+(_o_ )+ISA_OFFSET))
76 #define DP_OUT(_b_, _o_, _d_) *((vu_short *)((_b_)+(_o_)+ISA_OFFSET)) = (_d_)
77 #define DP_IN_DATA(_b_, _d_)  (_d_) = *( (vu_short *) ((_b_)+ISA_OFFSET))
78 #define DP_OUT_DATA(_b_, _d_) *( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
79 #endif
80
81
82 /*
83  * Set 1 bit data
84  */
85 static void ax88796_bitset(u32 bit)
86 {
87         /* DATA1 */
88         if( bit )
89                 EEDI_HIGH;
90         else
91                 EEDI_LOW;
92
93         EECLK_LOW;
94         udelay(1000);
95         EECLK_HIGH;
96         udelay(1000);
97         EEDI_LOW;
98 }
99
100 /*
101  * Get 1 bit data
102  */
103 static u8 ax88796_bitget(void)
104 {
105         u8 bit;
106
107         EECLK_LOW;
108         udelay(1000);
109         /* DATA */
110         bit = EEDO;
111         EECLK_HIGH;
112         udelay(1000);
113
114         return bit;
115 }
116
117 /*
118  * Send COMMAND to EEPROM
119  */
120 static void ax88796_eep_cmd(u8 cmd)
121 {
122         ax88796_bitset(BIT_DUMMY);
123         switch(cmd){
124                 case MAC_EEP_READ:
125                         ax88796_bitset(1);
126                         ax88796_bitset(1);
127                         ax88796_bitset(0);
128                         break;
129
130                 case MAC_EEP_WRITE:
131                         ax88796_bitset(1);
132                         ax88796_bitset(0);
133                         ax88796_bitset(1);
134                         break;
135
136                 case MAC_EEP_ERACE:
137                         ax88796_bitset(1);
138                         ax88796_bitset(1);
139                         ax88796_bitset(1);
140                         break;
141
142                 case MAC_EEP_EWEN:
143                         ax88796_bitset(1);
144                         ax88796_bitset(0);
145                         ax88796_bitset(0);
146                         break;
147
148                 case MAC_EEP_EWDS:
149                         ax88796_bitset(1);
150                         ax88796_bitset(0);
151                         ax88796_bitset(0);
152                         break;
153                 default:
154                         break;
155         }
156 }
157
158 static void ax88796_eep_setaddr(u16 addr)
159 {
160         int i ;
161         for( i = 7 ; i >= 0 ; i-- )
162                 ax88796_bitset(addr & (1 << i));
163 }
164
165 /*
166  * Get data from EEPROM
167  */
168 static u16 ax88796_eep_getdata(void)
169 {
170         ushort data = 0;
171         int i;
172
173         ax88796_bitget();       /* DUMMY */
174         for( i = 0 ; i < 16 ; i++ ){
175                 data <<= 1;
176                 data |= ax88796_bitget();
177         }
178         return data;
179 }
180
181 static void ax88796_mac_read(u8 *buff)
182 {
183         int i ;
184         u16 data, addr = 0;
185
186         for( i = 0 ; i < 3; i++ )
187         {
188                 EECS_HIGH;
189                 EEDI_LOW;
190                 udelay(1000);
191                 /* READ COMMAND */
192                 ax88796_eep_cmd(MAC_EEP_READ);
193                 /* ADDRESS */
194                 ax88796_eep_setaddr(addr++);
195                 /* GET DATA */
196                 data = ax88796_eep_getdata();
197                 *buff++ = (uchar)(data & 0xff);
198                 *buff++ = (uchar)((data >> 8) & 0xff);
199                 EECLK_LOW;
200                 EEDI_LOW;
201                 EECS_LOW;
202         }
203 }
204
205 int get_prom(u8* mac_addr)
206 {
207         u8 prom[32];
208         int i;
209
210         ax88796_mac_read(prom);
211         for (i = 0; i < 6; i++){
212                 mac_addr[i] = prom[i];
213         }
214         return 1;
215 }
216
217 #endif /* __DRIVERS_AX88796L_H__ */