1 /*******************************************************************************
3 * Intel Ethernet Controller XL710 Family Linux Driver
4 * Copyright(c) 2013 - 2014 Intel Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along
16 * with this program. If not, see <http://www.gnu.org/licenses/>.
18 * The full GNU General Public License is included in this distribution in
19 * the file called "COPYING".
21 * Contact Information:
22 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 ******************************************************************************/
29 #include "i40e_diag.h"
30 #ifdef CONFIG_I40E_VXLAN
31 #include <net/vxlan.h>
34 const char i40e_driver_name[] = "i40e";
35 static const char i40e_driver_string[] =
36 "Intel(R) Ethernet Connection XL710 Network Driver";
40 #define DRV_VERSION_MAJOR 0
41 #define DRV_VERSION_MINOR 3
42 #define DRV_VERSION_BUILD 46
43 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
44 __stringify(DRV_VERSION_MINOR) "." \
45 __stringify(DRV_VERSION_BUILD) DRV_KERN
46 const char i40e_driver_version_str[] = DRV_VERSION;
47 static const char i40e_copyright[] = "Copyright (c) 2013 - 2014 Intel Corporation.";
49 /* a bit of forward declarations */
50 static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi);
51 static void i40e_handle_reset_warning(struct i40e_pf *pf);
52 static int i40e_add_vsi(struct i40e_vsi *vsi);
53 static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi);
54 static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit);
55 static int i40e_setup_misc_vector(struct i40e_pf *pf);
56 static void i40e_determine_queue_usage(struct i40e_pf *pf);
57 static int i40e_setup_pf_filter_control(struct i40e_pf *pf);
58 static void i40e_fdir_sb_setup(struct i40e_pf *pf);
59 static int i40e_veb_get_bw_info(struct i40e_veb *veb);
61 /* i40e_pci_tbl - PCI Device ID Table
63 * Last entry must be all 0s
65 * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
66 * Class, Class Mask, private data (not used) }
68 static DEFINE_PCI_DEVICE_TABLE(i40e_pci_tbl) = {
69 {PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_XL710), 0},
70 {PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_X710), 0},
71 {PCI_VDEVICE(INTEL, I40E_DEV_ID_QEMU), 0},
72 {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_A), 0},
73 {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_B), 0},
74 {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_C), 0},
75 {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_D), 0},
76 {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_A), 0},
77 {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_B), 0},
78 {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_C), 0},
79 /* required last entry */
82 MODULE_DEVICE_TABLE(pci, i40e_pci_tbl);
84 #define I40E_MAX_VF_COUNT 128
85 static int debug = -1;
86 module_param(debug, int, 0);
87 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
89 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
90 MODULE_DESCRIPTION("Intel(R) Ethernet Connection XL710 Network Driver");
91 MODULE_LICENSE("GPL");
92 MODULE_VERSION(DRV_VERSION);
95 * i40e_allocate_dma_mem_d - OS specific memory alloc for shared code
96 * @hw: pointer to the HW structure
97 * @mem: ptr to mem struct to fill out
98 * @size: size of memory requested
99 * @alignment: what to align the allocation to
101 int i40e_allocate_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem,
102 u64 size, u32 alignment)
104 struct i40e_pf *pf = (struct i40e_pf *)hw->back;
106 mem->size = ALIGN(size, alignment);
107 mem->va = dma_zalloc_coherent(&pf->pdev->dev, mem->size,
108 &mem->pa, GFP_KERNEL);
116 * i40e_free_dma_mem_d - OS specific memory free for shared code
117 * @hw: pointer to the HW structure
118 * @mem: ptr to mem struct to free
120 int i40e_free_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem)
122 struct i40e_pf *pf = (struct i40e_pf *)hw->back;
124 dma_free_coherent(&pf->pdev->dev, mem->size, mem->va, mem->pa);
133 * i40e_allocate_virt_mem_d - OS specific memory alloc for shared code
134 * @hw: pointer to the HW structure
135 * @mem: ptr to mem struct to fill out
136 * @size: size of memory requested
138 int i40e_allocate_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem,
142 mem->va = kzalloc(size, GFP_KERNEL);
151 * i40e_free_virt_mem_d - OS specific memory free for shared code
152 * @hw: pointer to the HW structure
153 * @mem: ptr to mem struct to free
155 int i40e_free_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem)
157 /* it's ok to kfree a NULL pointer */
166 * i40e_get_lump - find a lump of free generic resource
167 * @pf: board private structure
168 * @pile: the pile of resource to search
169 * @needed: the number of items needed
170 * @id: an owner id to stick on the items assigned
172 * Returns the base item index of the lump, or negative for error
174 * The search_hint trick and lack of advanced fit-finding only work
175 * because we're highly likely to have all the same size lump requests.
176 * Linear search time and any fragmentation should be minimal.
178 static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile,
184 if (!pile || needed == 0 || id >= I40E_PILE_VALID_BIT) {
185 dev_info(&pf->pdev->dev,
186 "param err: pile=%p needed=%d id=0x%04x\n",
191 /* start the linear search with an imperfect hint */
192 i = pile->search_hint;
193 while (i < pile->num_entries) {
194 /* skip already allocated entries */
195 if (pile->list[i] & I40E_PILE_VALID_BIT) {
200 /* do we have enough in this lump? */
201 for (j = 0; (j < needed) && ((i+j) < pile->num_entries); j++) {
202 if (pile->list[i+j] & I40E_PILE_VALID_BIT)
207 /* there was enough, so assign it to the requestor */
208 for (j = 0; j < needed; j++)
209 pile->list[i+j] = id | I40E_PILE_VALID_BIT;
211 pile->search_hint = i + j;
214 /* not enough, so skip over it and continue looking */
223 * i40e_put_lump - return a lump of generic resource
224 * @pile: the pile of resource to search
225 * @index: the base item index
226 * @id: the owner id of the items assigned
228 * Returns the count of items in the lump
230 static int i40e_put_lump(struct i40e_lump_tracking *pile, u16 index, u16 id)
232 int valid_id = (id | I40E_PILE_VALID_BIT);
236 if (!pile || index >= pile->num_entries)
240 i < pile->num_entries && pile->list[i] == valid_id;
246 if (count && index < pile->search_hint)
247 pile->search_hint = index;
253 * i40e_service_event_schedule - Schedule the service task to wake up
254 * @pf: board private structure
256 * If not already scheduled, this puts the task into the work queue
258 static void i40e_service_event_schedule(struct i40e_pf *pf)
260 if (!test_bit(__I40E_DOWN, &pf->state) &&
261 !test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) &&
262 !test_and_set_bit(__I40E_SERVICE_SCHED, &pf->state))
263 schedule_work(&pf->service_task);
267 * i40e_tx_timeout - Respond to a Tx Hang
268 * @netdev: network interface device structure
270 * If any port has noticed a Tx timeout, it is likely that the whole
271 * device is munged, not just the one netdev port, so go for the full
274 static void i40e_tx_timeout(struct net_device *netdev)
276 struct i40e_netdev_priv *np = netdev_priv(netdev);
277 struct i40e_vsi *vsi = np->vsi;
278 struct i40e_pf *pf = vsi->back;
280 pf->tx_timeout_count++;
282 if (time_after(jiffies, (pf->tx_timeout_last_recovery + HZ*20)))
283 pf->tx_timeout_recovery_level = 0;
284 pf->tx_timeout_last_recovery = jiffies;
285 netdev_info(netdev, "tx_timeout recovery level %d\n",
286 pf->tx_timeout_recovery_level);
288 switch (pf->tx_timeout_recovery_level) {
290 /* disable and re-enable queues for the VSI */
291 if (in_interrupt()) {
292 set_bit(__I40E_REINIT_REQUESTED, &pf->state);
293 set_bit(__I40E_REINIT_REQUESTED, &vsi->state);
295 i40e_vsi_reinit_locked(vsi);
299 set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
302 set_bit(__I40E_CORE_RESET_REQUESTED, &pf->state);
305 set_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state);
308 netdev_err(netdev, "tx_timeout recovery unsuccessful\n");
309 set_bit(__I40E_DOWN, &vsi->state);
313 i40e_service_event_schedule(pf);
314 pf->tx_timeout_recovery_level++;
318 * i40e_release_rx_desc - Store the new tail and head values
319 * @rx_ring: ring to bump
320 * @val: new head index
322 static inline void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
324 rx_ring->next_to_use = val;
326 /* Force memory writes to complete before letting h/w
327 * know there are new descriptors to fetch. (Only
328 * applicable for weak-ordered memory model archs,
332 writel(val, rx_ring->tail);
336 * i40e_get_vsi_stats_struct - Get System Network Statistics
337 * @vsi: the VSI we care about
339 * Returns the address of the device statistics structure.
340 * The statistics are actually updated from the service task.
342 struct rtnl_link_stats64 *i40e_get_vsi_stats_struct(struct i40e_vsi *vsi)
344 return &vsi->net_stats;
348 * i40e_get_netdev_stats_struct - Get statistics for netdev interface
349 * @netdev: network interface device structure
351 * Returns the address of the device statistics structure.
352 * The statistics are actually updated from the service task.
354 static struct rtnl_link_stats64 *i40e_get_netdev_stats_struct(
355 struct net_device *netdev,
356 struct rtnl_link_stats64 *stats)
358 struct i40e_netdev_priv *np = netdev_priv(netdev);
359 struct i40e_vsi *vsi = np->vsi;
360 struct rtnl_link_stats64 *vsi_stats = i40e_get_vsi_stats_struct(vsi);
363 if (test_bit(__I40E_DOWN, &vsi->state))
370 for (i = 0; i < vsi->num_queue_pairs; i++) {
371 struct i40e_ring *tx_ring, *rx_ring;
375 tx_ring = ACCESS_ONCE(vsi->tx_rings[i]);
380 start = u64_stats_fetch_begin_irq(&tx_ring->syncp);
381 packets = tx_ring->stats.packets;
382 bytes = tx_ring->stats.bytes;
383 } while (u64_stats_fetch_retry_irq(&tx_ring->syncp, start));
385 stats->tx_packets += packets;
386 stats->tx_bytes += bytes;
387 rx_ring = &tx_ring[1];
390 start = u64_stats_fetch_begin_irq(&rx_ring->syncp);
391 packets = rx_ring->stats.packets;
392 bytes = rx_ring->stats.bytes;
393 } while (u64_stats_fetch_retry_irq(&rx_ring->syncp, start));
395 stats->rx_packets += packets;
396 stats->rx_bytes += bytes;
400 /* following stats updated by ixgbe_watchdog_task() */
401 stats->multicast = vsi_stats->multicast;
402 stats->tx_errors = vsi_stats->tx_errors;
403 stats->tx_dropped = vsi_stats->tx_dropped;
404 stats->rx_errors = vsi_stats->rx_errors;
405 stats->rx_crc_errors = vsi_stats->rx_crc_errors;
406 stats->rx_length_errors = vsi_stats->rx_length_errors;
412 * i40e_vsi_reset_stats - Resets all stats of the given vsi
413 * @vsi: the VSI to have its stats reset
415 void i40e_vsi_reset_stats(struct i40e_vsi *vsi)
417 struct rtnl_link_stats64 *ns;
423 ns = i40e_get_vsi_stats_struct(vsi);
424 memset(ns, 0, sizeof(*ns));
425 memset(&vsi->net_stats_offsets, 0, sizeof(vsi->net_stats_offsets));
426 memset(&vsi->eth_stats, 0, sizeof(vsi->eth_stats));
427 memset(&vsi->eth_stats_offsets, 0, sizeof(vsi->eth_stats_offsets));
428 if (vsi->rx_rings && vsi->rx_rings[0]) {
429 for (i = 0; i < vsi->num_queue_pairs; i++) {
430 memset(&vsi->rx_rings[i]->stats, 0 ,
431 sizeof(vsi->rx_rings[i]->stats));
432 memset(&vsi->rx_rings[i]->rx_stats, 0 ,
433 sizeof(vsi->rx_rings[i]->rx_stats));
434 memset(&vsi->tx_rings[i]->stats, 0 ,
435 sizeof(vsi->tx_rings[i]->stats));
436 memset(&vsi->tx_rings[i]->tx_stats, 0,
437 sizeof(vsi->tx_rings[i]->tx_stats));
440 vsi->stat_offsets_loaded = false;
444 * i40e_pf_reset_stats - Reset all of the stats for the given pf
445 * @pf: the PF to be reset
447 void i40e_pf_reset_stats(struct i40e_pf *pf)
449 memset(&pf->stats, 0, sizeof(pf->stats));
450 memset(&pf->stats_offsets, 0, sizeof(pf->stats_offsets));
451 pf->stat_offsets_loaded = false;
455 * i40e_stat_update48 - read and update a 48 bit stat from the chip
456 * @hw: ptr to the hardware info
457 * @hireg: the high 32 bit reg to read
458 * @loreg: the low 32 bit reg to read
459 * @offset_loaded: has the initial offset been loaded yet
460 * @offset: ptr to current offset value
461 * @stat: ptr to the stat
463 * Since the device stats are not reset at PFReset, they likely will not
464 * be zeroed when the driver starts. We'll save the first values read
465 * and use them as offsets to be subtracted from the raw values in order
466 * to report stats that count from zero. In the process, we also manage
467 * the potential roll-over.
469 static void i40e_stat_update48(struct i40e_hw *hw, u32 hireg, u32 loreg,
470 bool offset_loaded, u64 *offset, u64 *stat)
474 if (hw->device_id == I40E_DEV_ID_QEMU) {
475 new_data = rd32(hw, loreg);
476 new_data |= ((u64)(rd32(hw, hireg) & 0xFFFF)) << 32;
478 new_data = rd64(hw, loreg);
482 if (likely(new_data >= *offset))
483 *stat = new_data - *offset;
485 *stat = (new_data + ((u64)1 << 48)) - *offset;
486 *stat &= 0xFFFFFFFFFFFFULL;
490 * i40e_stat_update32 - read and update a 32 bit stat from the chip
491 * @hw: ptr to the hardware info
492 * @reg: the hw reg to read
493 * @offset_loaded: has the initial offset been loaded yet
494 * @offset: ptr to current offset value
495 * @stat: ptr to the stat
497 static void i40e_stat_update32(struct i40e_hw *hw, u32 reg,
498 bool offset_loaded, u64 *offset, u64 *stat)
502 new_data = rd32(hw, reg);
505 if (likely(new_data >= *offset))
506 *stat = (u32)(new_data - *offset);
508 *stat = (u32)((new_data + ((u64)1 << 32)) - *offset);
512 * i40e_update_eth_stats - Update VSI-specific ethernet statistics counters.
513 * @vsi: the VSI to be updated
515 void i40e_update_eth_stats(struct i40e_vsi *vsi)
517 int stat_idx = le16_to_cpu(vsi->info.stat_counter_idx);
518 struct i40e_pf *pf = vsi->back;
519 struct i40e_hw *hw = &pf->hw;
520 struct i40e_eth_stats *oes;
521 struct i40e_eth_stats *es; /* device's eth stats */
523 es = &vsi->eth_stats;
524 oes = &vsi->eth_stats_offsets;
526 /* Gather up the stats that the hw collects */
527 i40e_stat_update32(hw, I40E_GLV_TEPC(stat_idx),
528 vsi->stat_offsets_loaded,
529 &oes->tx_errors, &es->tx_errors);
530 i40e_stat_update32(hw, I40E_GLV_RDPC(stat_idx),
531 vsi->stat_offsets_loaded,
532 &oes->rx_discards, &es->rx_discards);
534 i40e_stat_update48(hw, I40E_GLV_GORCH(stat_idx),
535 I40E_GLV_GORCL(stat_idx),
536 vsi->stat_offsets_loaded,
537 &oes->rx_bytes, &es->rx_bytes);
538 i40e_stat_update48(hw, I40E_GLV_UPRCH(stat_idx),
539 I40E_GLV_UPRCL(stat_idx),
540 vsi->stat_offsets_loaded,
541 &oes->rx_unicast, &es->rx_unicast);
542 i40e_stat_update48(hw, I40E_GLV_MPRCH(stat_idx),
543 I40E_GLV_MPRCL(stat_idx),
544 vsi->stat_offsets_loaded,
545 &oes->rx_multicast, &es->rx_multicast);
546 i40e_stat_update48(hw, I40E_GLV_BPRCH(stat_idx),
547 I40E_GLV_BPRCL(stat_idx),
548 vsi->stat_offsets_loaded,
549 &oes->rx_broadcast, &es->rx_broadcast);
551 i40e_stat_update48(hw, I40E_GLV_GOTCH(stat_idx),
552 I40E_GLV_GOTCL(stat_idx),
553 vsi->stat_offsets_loaded,
554 &oes->tx_bytes, &es->tx_bytes);
555 i40e_stat_update48(hw, I40E_GLV_UPTCH(stat_idx),
556 I40E_GLV_UPTCL(stat_idx),
557 vsi->stat_offsets_loaded,
558 &oes->tx_unicast, &es->tx_unicast);
559 i40e_stat_update48(hw, I40E_GLV_MPTCH(stat_idx),
560 I40E_GLV_MPTCL(stat_idx),
561 vsi->stat_offsets_loaded,
562 &oes->tx_multicast, &es->tx_multicast);
563 i40e_stat_update48(hw, I40E_GLV_BPTCH(stat_idx),
564 I40E_GLV_BPTCL(stat_idx),
565 vsi->stat_offsets_loaded,
566 &oes->tx_broadcast, &es->tx_broadcast);
567 vsi->stat_offsets_loaded = true;
571 * i40e_update_veb_stats - Update Switch component statistics
572 * @veb: the VEB being updated
574 static void i40e_update_veb_stats(struct i40e_veb *veb)
576 struct i40e_pf *pf = veb->pf;
577 struct i40e_hw *hw = &pf->hw;
578 struct i40e_eth_stats *oes;
579 struct i40e_eth_stats *es; /* device's eth stats */
582 idx = veb->stats_idx;
584 oes = &veb->stats_offsets;
586 /* Gather up the stats that the hw collects */
587 i40e_stat_update32(hw, I40E_GLSW_TDPC(idx),
588 veb->stat_offsets_loaded,
589 &oes->tx_discards, &es->tx_discards);
590 if (hw->revision_id > 0)
591 i40e_stat_update32(hw, I40E_GLSW_RUPP(idx),
592 veb->stat_offsets_loaded,
593 &oes->rx_unknown_protocol,
594 &es->rx_unknown_protocol);
595 i40e_stat_update48(hw, I40E_GLSW_GORCH(idx), I40E_GLSW_GORCL(idx),
596 veb->stat_offsets_loaded,
597 &oes->rx_bytes, &es->rx_bytes);
598 i40e_stat_update48(hw, I40E_GLSW_UPRCH(idx), I40E_GLSW_UPRCL(idx),
599 veb->stat_offsets_loaded,
600 &oes->rx_unicast, &es->rx_unicast);
601 i40e_stat_update48(hw, I40E_GLSW_MPRCH(idx), I40E_GLSW_MPRCL(idx),
602 veb->stat_offsets_loaded,
603 &oes->rx_multicast, &es->rx_multicast);
604 i40e_stat_update48(hw, I40E_GLSW_BPRCH(idx), I40E_GLSW_BPRCL(idx),
605 veb->stat_offsets_loaded,
606 &oes->rx_broadcast, &es->rx_broadcast);
608 i40e_stat_update48(hw, I40E_GLSW_GOTCH(idx), I40E_GLSW_GOTCL(idx),
609 veb->stat_offsets_loaded,
610 &oes->tx_bytes, &es->tx_bytes);
611 i40e_stat_update48(hw, I40E_GLSW_UPTCH(idx), I40E_GLSW_UPTCL(idx),
612 veb->stat_offsets_loaded,
613 &oes->tx_unicast, &es->tx_unicast);
614 i40e_stat_update48(hw, I40E_GLSW_MPTCH(idx), I40E_GLSW_MPTCL(idx),
615 veb->stat_offsets_loaded,
616 &oes->tx_multicast, &es->tx_multicast);
617 i40e_stat_update48(hw, I40E_GLSW_BPTCH(idx), I40E_GLSW_BPTCL(idx),
618 veb->stat_offsets_loaded,
619 &oes->tx_broadcast, &es->tx_broadcast);
620 veb->stat_offsets_loaded = true;
624 * i40e_update_link_xoff_rx - Update XOFF received in link flow control mode
625 * @pf: the corresponding PF
627 * Update the Rx XOFF counter (PAUSE frames) in link flow control mode
629 static void i40e_update_link_xoff_rx(struct i40e_pf *pf)
631 struct i40e_hw_port_stats *osd = &pf->stats_offsets;
632 struct i40e_hw_port_stats *nsd = &pf->stats;
633 struct i40e_hw *hw = &pf->hw;
637 if ((hw->fc.current_mode != I40E_FC_FULL) &&
638 (hw->fc.current_mode != I40E_FC_RX_PAUSE))
641 xoff = nsd->link_xoff_rx;
642 i40e_stat_update32(hw, I40E_GLPRT_LXOFFRXC(hw->port),
643 pf->stat_offsets_loaded,
644 &osd->link_xoff_rx, &nsd->link_xoff_rx);
646 /* No new LFC xoff rx */
647 if (!(nsd->link_xoff_rx - xoff))
650 /* Clear the __I40E_HANG_CHECK_ARMED bit for all Tx rings */
651 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
652 struct i40e_vsi *vsi = pf->vsi[v];
657 for (i = 0; i < vsi->num_queue_pairs; i++) {
658 struct i40e_ring *ring = vsi->tx_rings[i];
659 clear_bit(__I40E_HANG_CHECK_ARMED, &ring->state);
665 * i40e_update_prio_xoff_rx - Update XOFF received in PFC mode
666 * @pf: the corresponding PF
668 * Update the Rx XOFF counter (PAUSE frames) in PFC mode
670 static void i40e_update_prio_xoff_rx(struct i40e_pf *pf)
672 struct i40e_hw_port_stats *osd = &pf->stats_offsets;
673 struct i40e_hw_port_stats *nsd = &pf->stats;
674 bool xoff[I40E_MAX_TRAFFIC_CLASS] = {false};
675 struct i40e_dcbx_config *dcb_cfg;
676 struct i40e_hw *hw = &pf->hw;
680 dcb_cfg = &hw->local_dcbx_config;
682 /* See if DCB enabled with PFC TC */
683 if (!(pf->flags & I40E_FLAG_DCB_ENABLED) ||
684 !(dcb_cfg->pfc.pfcenable)) {
685 i40e_update_link_xoff_rx(pf);
689 for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
690 u64 prio_xoff = nsd->priority_xoff_rx[i];
691 i40e_stat_update32(hw, I40E_GLPRT_PXOFFRXC(hw->port, i),
692 pf->stat_offsets_loaded,
693 &osd->priority_xoff_rx[i],
694 &nsd->priority_xoff_rx[i]);
696 /* No new PFC xoff rx */
697 if (!(nsd->priority_xoff_rx[i] - prio_xoff))
699 /* Get the TC for given priority */
700 tc = dcb_cfg->etscfg.prioritytable[i];
704 /* Clear the __I40E_HANG_CHECK_ARMED bit for Tx rings */
705 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
706 struct i40e_vsi *vsi = pf->vsi[v];
711 for (i = 0; i < vsi->num_queue_pairs; i++) {
712 struct i40e_ring *ring = vsi->tx_rings[i];
716 clear_bit(__I40E_HANG_CHECK_ARMED,
723 * i40e_update_stats - Update the board statistics counters.
724 * @vsi: the VSI to be updated
726 * There are a few instances where we store the same stat in a
727 * couple of different structs. This is partly because we have
728 * the netdev stats that need to be filled out, which is slightly
729 * different from the "eth_stats" defined by the chip and used in
730 * VF communications. We sort it all out here in a central place.
732 void i40e_update_stats(struct i40e_vsi *vsi)
734 struct i40e_pf *pf = vsi->back;
735 struct i40e_hw *hw = &pf->hw;
736 struct rtnl_link_stats64 *ons;
737 struct rtnl_link_stats64 *ns; /* netdev stats */
738 struct i40e_eth_stats *oes;
739 struct i40e_eth_stats *es; /* device's eth stats */
740 u32 tx_restart, tx_busy;
748 if (test_bit(__I40E_DOWN, &vsi->state) ||
749 test_bit(__I40E_CONFIG_BUSY, &pf->state))
752 ns = i40e_get_vsi_stats_struct(vsi);
753 ons = &vsi->net_stats_offsets;
754 es = &vsi->eth_stats;
755 oes = &vsi->eth_stats_offsets;
757 /* Gather up the netdev and vsi stats that the driver collects
758 * on the fly during packet processing
762 tx_restart = tx_busy = 0;
766 for (q = 0; q < vsi->num_queue_pairs; q++) {
772 p = ACCESS_ONCE(vsi->tx_rings[q]);
775 start = u64_stats_fetch_begin_irq(&p->syncp);
776 packets = p->stats.packets;
777 bytes = p->stats.bytes;
778 } while (u64_stats_fetch_retry_irq(&p->syncp, start));
781 tx_restart += p->tx_stats.restart_queue;
782 tx_busy += p->tx_stats.tx_busy;
784 /* Rx queue is part of the same block as Tx queue */
787 start = u64_stats_fetch_begin_irq(&p->syncp);
788 packets = p->stats.packets;
789 bytes = p->stats.bytes;
790 } while (u64_stats_fetch_retry_irq(&p->syncp, start));
793 rx_buf += p->rx_stats.alloc_buff_failed;
794 rx_page += p->rx_stats.alloc_page_failed;
797 vsi->tx_restart = tx_restart;
798 vsi->tx_busy = tx_busy;
799 vsi->rx_page_failed = rx_page;
800 vsi->rx_buf_failed = rx_buf;
802 ns->rx_packets = rx_p;
804 ns->tx_packets = tx_p;
807 i40e_update_eth_stats(vsi);
808 /* update netdev stats from eth stats */
809 ons->rx_errors = oes->rx_errors;
810 ns->rx_errors = es->rx_errors;
811 ons->tx_errors = oes->tx_errors;
812 ns->tx_errors = es->tx_errors;
813 ons->multicast = oes->rx_multicast;
814 ns->multicast = es->rx_multicast;
815 ons->tx_dropped = oes->tx_discards;
816 ns->tx_dropped = es->tx_discards;
818 /* Get the port data only if this is the main PF VSI */
819 if (vsi == pf->vsi[pf->lan_vsi]) {
820 struct i40e_hw_port_stats *nsd = &pf->stats;
821 struct i40e_hw_port_stats *osd = &pf->stats_offsets;
823 i40e_stat_update48(hw, I40E_GLPRT_GORCH(hw->port),
824 I40E_GLPRT_GORCL(hw->port),
825 pf->stat_offsets_loaded,
826 &osd->eth.rx_bytes, &nsd->eth.rx_bytes);
827 i40e_stat_update48(hw, I40E_GLPRT_GOTCH(hw->port),
828 I40E_GLPRT_GOTCL(hw->port),
829 pf->stat_offsets_loaded,
830 &osd->eth.tx_bytes, &nsd->eth.tx_bytes);
831 i40e_stat_update32(hw, I40E_GLPRT_RDPC(hw->port),
832 pf->stat_offsets_loaded,
833 &osd->eth.rx_discards,
834 &nsd->eth.rx_discards);
835 i40e_stat_update32(hw, I40E_GLPRT_TDPC(hw->port),
836 pf->stat_offsets_loaded,
837 &osd->eth.tx_discards,
838 &nsd->eth.tx_discards);
839 i40e_stat_update48(hw, I40E_GLPRT_MPRCH(hw->port),
840 I40E_GLPRT_MPRCL(hw->port),
841 pf->stat_offsets_loaded,
842 &osd->eth.rx_multicast,
843 &nsd->eth.rx_multicast);
845 i40e_stat_update32(hw, I40E_GLPRT_TDOLD(hw->port),
846 pf->stat_offsets_loaded,
847 &osd->tx_dropped_link_down,
848 &nsd->tx_dropped_link_down);
850 i40e_stat_update32(hw, I40E_GLPRT_CRCERRS(hw->port),
851 pf->stat_offsets_loaded,
852 &osd->crc_errors, &nsd->crc_errors);
853 ns->rx_crc_errors = nsd->crc_errors;
855 i40e_stat_update32(hw, I40E_GLPRT_ILLERRC(hw->port),
856 pf->stat_offsets_loaded,
857 &osd->illegal_bytes, &nsd->illegal_bytes);
858 ns->rx_errors = nsd->crc_errors
859 + nsd->illegal_bytes;
861 i40e_stat_update32(hw, I40E_GLPRT_MLFC(hw->port),
862 pf->stat_offsets_loaded,
863 &osd->mac_local_faults,
864 &nsd->mac_local_faults);
865 i40e_stat_update32(hw, I40E_GLPRT_MRFC(hw->port),
866 pf->stat_offsets_loaded,
867 &osd->mac_remote_faults,
868 &nsd->mac_remote_faults);
870 i40e_stat_update32(hw, I40E_GLPRT_RLEC(hw->port),
871 pf->stat_offsets_loaded,
872 &osd->rx_length_errors,
873 &nsd->rx_length_errors);
874 ns->rx_length_errors = nsd->rx_length_errors;
876 i40e_stat_update32(hw, I40E_GLPRT_LXONRXC(hw->port),
877 pf->stat_offsets_loaded,
878 &osd->link_xon_rx, &nsd->link_xon_rx);
879 i40e_stat_update32(hw, I40E_GLPRT_LXONTXC(hw->port),
880 pf->stat_offsets_loaded,
881 &osd->link_xon_tx, &nsd->link_xon_tx);
882 i40e_update_prio_xoff_rx(pf); /* handles I40E_GLPRT_LXOFFRXC */
883 i40e_stat_update32(hw, I40E_GLPRT_LXOFFTXC(hw->port),
884 pf->stat_offsets_loaded,
885 &osd->link_xoff_tx, &nsd->link_xoff_tx);
887 for (i = 0; i < 8; i++) {
888 i40e_stat_update32(hw, I40E_GLPRT_PXONRXC(hw->port, i),
889 pf->stat_offsets_loaded,
890 &osd->priority_xon_rx[i],
891 &nsd->priority_xon_rx[i]);
892 i40e_stat_update32(hw, I40E_GLPRT_PXONTXC(hw->port, i),
893 pf->stat_offsets_loaded,
894 &osd->priority_xon_tx[i],
895 &nsd->priority_xon_tx[i]);
896 i40e_stat_update32(hw, I40E_GLPRT_PXOFFTXC(hw->port, i),
897 pf->stat_offsets_loaded,
898 &osd->priority_xoff_tx[i],
899 &nsd->priority_xoff_tx[i]);
900 i40e_stat_update32(hw,
901 I40E_GLPRT_RXON2OFFCNT(hw->port, i),
902 pf->stat_offsets_loaded,
903 &osd->priority_xon_2_xoff[i],
904 &nsd->priority_xon_2_xoff[i]);
907 i40e_stat_update48(hw, I40E_GLPRT_PRC64H(hw->port),
908 I40E_GLPRT_PRC64L(hw->port),
909 pf->stat_offsets_loaded,
910 &osd->rx_size_64, &nsd->rx_size_64);
911 i40e_stat_update48(hw, I40E_GLPRT_PRC127H(hw->port),
912 I40E_GLPRT_PRC127L(hw->port),
913 pf->stat_offsets_loaded,
914 &osd->rx_size_127, &nsd->rx_size_127);
915 i40e_stat_update48(hw, I40E_GLPRT_PRC255H(hw->port),
916 I40E_GLPRT_PRC255L(hw->port),
917 pf->stat_offsets_loaded,
918 &osd->rx_size_255, &nsd->rx_size_255);
919 i40e_stat_update48(hw, I40E_GLPRT_PRC511H(hw->port),
920 I40E_GLPRT_PRC511L(hw->port),
921 pf->stat_offsets_loaded,
922 &osd->rx_size_511, &nsd->rx_size_511);
923 i40e_stat_update48(hw, I40E_GLPRT_PRC1023H(hw->port),
924 I40E_GLPRT_PRC1023L(hw->port),
925 pf->stat_offsets_loaded,
926 &osd->rx_size_1023, &nsd->rx_size_1023);
927 i40e_stat_update48(hw, I40E_GLPRT_PRC1522H(hw->port),
928 I40E_GLPRT_PRC1522L(hw->port),
929 pf->stat_offsets_loaded,
930 &osd->rx_size_1522, &nsd->rx_size_1522);
931 i40e_stat_update48(hw, I40E_GLPRT_PRC9522H(hw->port),
932 I40E_GLPRT_PRC9522L(hw->port),
933 pf->stat_offsets_loaded,
934 &osd->rx_size_big, &nsd->rx_size_big);
936 i40e_stat_update48(hw, I40E_GLPRT_PTC64H(hw->port),
937 I40E_GLPRT_PTC64L(hw->port),
938 pf->stat_offsets_loaded,
939 &osd->tx_size_64, &nsd->tx_size_64);
940 i40e_stat_update48(hw, I40E_GLPRT_PTC127H(hw->port),
941 I40E_GLPRT_PTC127L(hw->port),
942 pf->stat_offsets_loaded,
943 &osd->tx_size_127, &nsd->tx_size_127);
944 i40e_stat_update48(hw, I40E_GLPRT_PTC255H(hw->port),
945 I40E_GLPRT_PTC255L(hw->port),
946 pf->stat_offsets_loaded,
947 &osd->tx_size_255, &nsd->tx_size_255);
948 i40e_stat_update48(hw, I40E_GLPRT_PTC511H(hw->port),
949 I40E_GLPRT_PTC511L(hw->port),
950 pf->stat_offsets_loaded,
951 &osd->tx_size_511, &nsd->tx_size_511);
952 i40e_stat_update48(hw, I40E_GLPRT_PTC1023H(hw->port),
953 I40E_GLPRT_PTC1023L(hw->port),
954 pf->stat_offsets_loaded,
955 &osd->tx_size_1023, &nsd->tx_size_1023);
956 i40e_stat_update48(hw, I40E_GLPRT_PTC1522H(hw->port),
957 I40E_GLPRT_PTC1522L(hw->port),
958 pf->stat_offsets_loaded,
959 &osd->tx_size_1522, &nsd->tx_size_1522);
960 i40e_stat_update48(hw, I40E_GLPRT_PTC9522H(hw->port),
961 I40E_GLPRT_PTC9522L(hw->port),
962 pf->stat_offsets_loaded,
963 &osd->tx_size_big, &nsd->tx_size_big);
965 i40e_stat_update32(hw, I40E_GLPRT_RUC(hw->port),
966 pf->stat_offsets_loaded,
967 &osd->rx_undersize, &nsd->rx_undersize);
968 i40e_stat_update32(hw, I40E_GLPRT_RFC(hw->port),
969 pf->stat_offsets_loaded,
970 &osd->rx_fragments, &nsd->rx_fragments);
971 i40e_stat_update32(hw, I40E_GLPRT_ROC(hw->port),
972 pf->stat_offsets_loaded,
973 &osd->rx_oversize, &nsd->rx_oversize);
974 i40e_stat_update32(hw, I40E_GLPRT_RJC(hw->port),
975 pf->stat_offsets_loaded,
976 &osd->rx_jabber, &nsd->rx_jabber);
978 val = rd32(hw, I40E_PRTPM_EEE_STAT);
980 (val & I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_MASK) >>
981 I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_SHIFT;
983 (val & I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_MASK) >>
984 I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_SHIFT;
985 i40e_stat_update32(hw, I40E_PRTPM_TLPIC,
986 pf->stat_offsets_loaded,
987 &osd->tx_lpi_count, &nsd->tx_lpi_count);
988 i40e_stat_update32(hw, I40E_PRTPM_RLPIC,
989 pf->stat_offsets_loaded,
990 &osd->rx_lpi_count, &nsd->rx_lpi_count);
993 pf->stat_offsets_loaded = true;
997 * i40e_find_filter - Search VSI filter list for specific mac/vlan filter
998 * @vsi: the VSI to be searched
999 * @macaddr: the MAC address
1001 * @is_vf: make sure its a vf filter, else doesn't matter
1002 * @is_netdev: make sure its a netdev filter, else doesn't matter
1004 * Returns ptr to the filter object or NULL
1006 static struct i40e_mac_filter *i40e_find_filter(struct i40e_vsi *vsi,
1007 u8 *macaddr, s16 vlan,
1008 bool is_vf, bool is_netdev)
1010 struct i40e_mac_filter *f;
1012 if (!vsi || !macaddr)
1015 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1016 if ((ether_addr_equal(macaddr, f->macaddr)) &&
1017 (vlan == f->vlan) &&
1018 (!is_vf || f->is_vf) &&
1019 (!is_netdev || f->is_netdev))
1026 * i40e_find_mac - Find a mac addr in the macvlan filters list
1027 * @vsi: the VSI to be searched
1028 * @macaddr: the MAC address we are searching for
1029 * @is_vf: make sure its a vf filter, else doesn't matter
1030 * @is_netdev: make sure its a netdev filter, else doesn't matter
1032 * Returns the first filter with the provided MAC address or NULL if
1033 * MAC address was not found
1035 struct i40e_mac_filter *i40e_find_mac(struct i40e_vsi *vsi, u8 *macaddr,
1036 bool is_vf, bool is_netdev)
1038 struct i40e_mac_filter *f;
1040 if (!vsi || !macaddr)
1043 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1044 if ((ether_addr_equal(macaddr, f->macaddr)) &&
1045 (!is_vf || f->is_vf) &&
1046 (!is_netdev || f->is_netdev))
1053 * i40e_is_vsi_in_vlan - Check if VSI is in vlan mode
1054 * @vsi: the VSI to be searched
1056 * Returns true if VSI is in vlan mode or false otherwise
1058 bool i40e_is_vsi_in_vlan(struct i40e_vsi *vsi)
1060 struct i40e_mac_filter *f;
1062 /* Only -1 for all the filters denotes not in vlan mode
1063 * so we have to go through all the list in order to make sure
1065 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1074 * i40e_put_mac_in_vlan - Make macvlan filters from macaddrs and vlans
1075 * @vsi: the VSI to be searched
1076 * @macaddr: the mac address to be filtered
1077 * @is_vf: true if it is a vf
1078 * @is_netdev: true if it is a netdev
1080 * Goes through all the macvlan filters and adds a
1081 * macvlan filter for each unique vlan that already exists
1083 * Returns first filter found on success, else NULL
1085 struct i40e_mac_filter *i40e_put_mac_in_vlan(struct i40e_vsi *vsi, u8 *macaddr,
1086 bool is_vf, bool is_netdev)
1088 struct i40e_mac_filter *f;
1090 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1091 if (!i40e_find_filter(vsi, macaddr, f->vlan,
1092 is_vf, is_netdev)) {
1093 if (!i40e_add_filter(vsi, macaddr, f->vlan,
1099 return list_first_entry_or_null(&vsi->mac_filter_list,
1100 struct i40e_mac_filter, list);
1104 * i40e_add_filter - Add a mac/vlan filter to the VSI
1105 * @vsi: the VSI to be searched
1106 * @macaddr: the MAC address
1108 * @is_vf: make sure its a vf filter, else doesn't matter
1109 * @is_netdev: make sure its a netdev filter, else doesn't matter
1111 * Returns ptr to the filter object or NULL when no memory available.
1113 struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
1114 u8 *macaddr, s16 vlan,
1115 bool is_vf, bool is_netdev)
1117 struct i40e_mac_filter *f;
1119 if (!vsi || !macaddr)
1122 f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev);
1124 f = kzalloc(sizeof(*f), GFP_ATOMIC);
1126 goto add_filter_out;
1128 memcpy(f->macaddr, macaddr, ETH_ALEN);
1132 INIT_LIST_HEAD(&f->list);
1133 list_add(&f->list, &vsi->mac_filter_list);
1136 /* increment counter and add a new flag if needed */
1142 } else if (is_netdev) {
1143 if (!f->is_netdev) {
1144 f->is_netdev = true;
1151 /* changed tells sync_filters_subtask to
1152 * push the filter down to the firmware
1155 vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
1156 vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
1164 * i40e_del_filter - Remove a mac/vlan filter from the VSI
1165 * @vsi: the VSI to be searched
1166 * @macaddr: the MAC address
1168 * @is_vf: make sure it's a vf filter, else doesn't matter
1169 * @is_netdev: make sure it's a netdev filter, else doesn't matter
1171 void i40e_del_filter(struct i40e_vsi *vsi,
1172 u8 *macaddr, s16 vlan,
1173 bool is_vf, bool is_netdev)
1175 struct i40e_mac_filter *f;
1177 if (!vsi || !macaddr)
1180 f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev);
1181 if (!f || f->counter == 0)
1189 } else if (is_netdev) {
1191 f->is_netdev = false;
1195 /* make sure we don't remove a filter in use by vf or netdev */
1197 min_f += (f->is_vf ? 1 : 0);
1198 min_f += (f->is_netdev ? 1 : 0);
1200 if (f->counter > min_f)
1204 /* counter == 0 tells sync_filters_subtask to
1205 * remove the filter from the firmware's list
1207 if (f->counter == 0) {
1209 vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
1210 vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
1215 * i40e_set_mac - NDO callback to set mac address
1216 * @netdev: network interface device structure
1217 * @p: pointer to an address structure
1219 * Returns 0 on success, negative on failure
1221 static int i40e_set_mac(struct net_device *netdev, void *p)
1223 struct i40e_netdev_priv *np = netdev_priv(netdev);
1224 struct i40e_vsi *vsi = np->vsi;
1225 struct sockaddr *addr = p;
1226 struct i40e_mac_filter *f;
1228 if (!is_valid_ether_addr(addr->sa_data))
1229 return -EADDRNOTAVAIL;
1231 netdev_info(netdev, "set mac address=%pM\n", addr->sa_data);
1233 if (ether_addr_equal(netdev->dev_addr, addr->sa_data))
1236 if (test_bit(__I40E_DOWN, &vsi->back->state) ||
1237 test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
1238 return -EADDRNOTAVAIL;
1240 if (vsi->type == I40E_VSI_MAIN) {
1242 ret = i40e_aq_mac_address_write(&vsi->back->hw,
1243 I40E_AQC_WRITE_TYPE_LAA_ONLY,
1244 addr->sa_data, NULL);
1247 "Addr change for Main VSI failed: %d\n",
1249 return -EADDRNOTAVAIL;
1252 memcpy(vsi->back->hw.mac.addr, addr->sa_data, netdev->addr_len);
1255 /* In order to be sure to not drop any packets, add the new address
1256 * then delete the old one.
1258 f = i40e_add_filter(vsi, addr->sa_data, I40E_VLAN_ANY, false, false);
1262 i40e_sync_vsi_filters(vsi);
1263 i40e_del_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY, false, false);
1264 i40e_sync_vsi_filters(vsi);
1266 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
1272 * i40e_vsi_setup_queue_map - Setup a VSI queue map based on enabled_tc
1273 * @vsi: the VSI being setup
1274 * @ctxt: VSI context structure
1275 * @enabled_tc: Enabled TCs bitmap
1276 * @is_add: True if called before Add VSI
1278 * Setup VSI queue mapping for enabled traffic classes.
1280 static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
1281 struct i40e_vsi_context *ctxt,
1285 struct i40e_pf *pf = vsi->back;
1295 sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
1298 if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
1299 /* Find numtc from enabled TC bitmap */
1300 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
1301 if (enabled_tc & (1 << i)) /* TC is enabled */
1305 dev_warn(&pf->pdev->dev, "DCB is enabled but no TC enabled, forcing TC0\n");
1309 /* At least TC0 is enabled in case of non-DCB case */
1313 vsi->tc_config.numtc = numtc;
1314 vsi->tc_config.enabled_tc = enabled_tc ? enabled_tc : 1;
1315 /* Number of queues per enabled TC */
1316 num_tc_qps = rounddown_pow_of_two(vsi->alloc_queue_pairs/numtc);
1317 num_tc_qps = min_t(int, num_tc_qps, I40E_MAX_QUEUES_PER_TC);
1319 /* Setup queue offset/count for all TCs for given VSI */
1320 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
1321 /* See if the given TC is enabled for the given VSI */
1322 if (vsi->tc_config.enabled_tc & (1 << i)) { /* TC is enabled */
1325 switch (vsi->type) {
1327 qcount = min_t(int, pf->rss_size, num_tc_qps);
1330 case I40E_VSI_SRIOV:
1331 case I40E_VSI_VMDQ2:
1333 qcount = num_tc_qps;
1337 vsi->tc_config.tc_info[i].qoffset = offset;
1338 vsi->tc_config.tc_info[i].qcount = qcount;
1340 /* find the power-of-2 of the number of queue pairs */
1343 while (num_qps && ((1 << pow) < qcount)) {
1348 vsi->tc_config.tc_info[i].netdev_tc = netdev_tc++;
1350 (offset << I40E_AQ_VSI_TC_QUE_OFFSET_SHIFT) |
1351 (pow << I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT);
1355 /* TC is not enabled so set the offset to
1356 * default queue and allocate one queue
1359 vsi->tc_config.tc_info[i].qoffset = 0;
1360 vsi->tc_config.tc_info[i].qcount = 1;
1361 vsi->tc_config.tc_info[i].netdev_tc = 0;
1365 ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
1368 /* Set actual Tx/Rx queue pairs */
1369 vsi->num_queue_pairs = offset;
1371 /* Scheduler section valid can only be set for ADD VSI */
1373 sections |= I40E_AQ_VSI_PROP_SCHED_VALID;
1375 ctxt->info.up_enable_bits = enabled_tc;
1377 if (vsi->type == I40E_VSI_SRIOV) {
1378 ctxt->info.mapping_flags |=
1379 cpu_to_le16(I40E_AQ_VSI_QUE_MAP_NONCONTIG);
1380 for (i = 0; i < vsi->num_queue_pairs; i++)
1381 ctxt->info.queue_mapping[i] =
1382 cpu_to_le16(vsi->base_queue + i);
1384 ctxt->info.mapping_flags |=
1385 cpu_to_le16(I40E_AQ_VSI_QUE_MAP_CONTIG);
1386 ctxt->info.queue_mapping[0] = cpu_to_le16(vsi->base_queue);
1388 ctxt->info.valid_sections |= cpu_to_le16(sections);
1392 * i40e_set_rx_mode - NDO callback to set the netdev filters
1393 * @netdev: network interface device structure
1395 static void i40e_set_rx_mode(struct net_device *netdev)
1397 struct i40e_netdev_priv *np = netdev_priv(netdev);
1398 struct i40e_mac_filter *f, *ftmp;
1399 struct i40e_vsi *vsi = np->vsi;
1400 struct netdev_hw_addr *uca;
1401 struct netdev_hw_addr *mca;
1402 struct netdev_hw_addr *ha;
1404 /* add addr if not already in the filter list */
1405 netdev_for_each_uc_addr(uca, netdev) {
1406 if (!i40e_find_mac(vsi, uca->addr, false, true)) {
1407 if (i40e_is_vsi_in_vlan(vsi))
1408 i40e_put_mac_in_vlan(vsi, uca->addr,
1411 i40e_add_filter(vsi, uca->addr, I40E_VLAN_ANY,
1416 netdev_for_each_mc_addr(mca, netdev) {
1417 if (!i40e_find_mac(vsi, mca->addr, false, true)) {
1418 if (i40e_is_vsi_in_vlan(vsi))
1419 i40e_put_mac_in_vlan(vsi, mca->addr,
1422 i40e_add_filter(vsi, mca->addr, I40E_VLAN_ANY,
1427 /* remove filter if not in netdev list */
1428 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
1434 if (is_multicast_ether_addr(f->macaddr)) {
1435 netdev_for_each_mc_addr(mca, netdev) {
1436 if (ether_addr_equal(mca->addr, f->macaddr)) {
1442 netdev_for_each_uc_addr(uca, netdev) {
1443 if (ether_addr_equal(uca->addr, f->macaddr)) {
1449 for_each_dev_addr(netdev, ha) {
1450 if (ether_addr_equal(ha->addr, f->macaddr)) {
1458 vsi, f->macaddr, I40E_VLAN_ANY, false, true);
1461 /* check for other flag changes */
1462 if (vsi->current_netdev_flags != vsi->netdev->flags) {
1463 vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
1464 vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
1469 * i40e_sync_vsi_filters - Update the VSI filter list to the HW
1470 * @vsi: ptr to the VSI
1472 * Push any outstanding VSI filter changes through the AdminQ.
1474 * Returns 0 or error value
1476 int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
1478 struct i40e_mac_filter *f, *ftmp;
1479 bool promisc_forced_on = false;
1480 bool add_happened = false;
1481 int filter_list_len = 0;
1482 u32 changed_flags = 0;
1483 i40e_status aq_ret = 0;
1489 /* empty array typed pointers, kcalloc later */
1490 struct i40e_aqc_add_macvlan_element_data *add_list;
1491 struct i40e_aqc_remove_macvlan_element_data *del_list;
1493 while (test_and_set_bit(__I40E_CONFIG_BUSY, &vsi->state))
1494 usleep_range(1000, 2000);
1498 changed_flags = vsi->current_netdev_flags ^ vsi->netdev->flags;
1499 vsi->current_netdev_flags = vsi->netdev->flags;
1502 if (vsi->flags & I40E_VSI_FLAG_FILTER_CHANGED) {
1503 vsi->flags &= ~I40E_VSI_FLAG_FILTER_CHANGED;
1505 filter_list_len = pf->hw.aq.asq_buf_size /
1506 sizeof(struct i40e_aqc_remove_macvlan_element_data);
1507 del_list = kcalloc(filter_list_len,
1508 sizeof(struct i40e_aqc_remove_macvlan_element_data),
1513 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
1517 if (f->counter != 0)
1522 /* add to delete list */
1523 memcpy(del_list[num_del].mac_addr,
1524 f->macaddr, ETH_ALEN);
1525 del_list[num_del].vlan_tag =
1526 cpu_to_le16((u16)(f->vlan ==
1527 I40E_VLAN_ANY ? 0 : f->vlan));
1529 cmd_flags |= I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
1530 del_list[num_del].flags = cmd_flags;
1533 /* unlink from filter list */
1537 /* flush a full buffer */
1538 if (num_del == filter_list_len) {
1539 aq_ret = i40e_aq_remove_macvlan(&pf->hw,
1540 vsi->seid, del_list, num_del,
1543 memset(del_list, 0, sizeof(*del_list));
1546 dev_info(&pf->pdev->dev,
1547 "ignoring delete macvlan error, err %d, aq_err %d while flushing a full buffer\n",
1549 pf->hw.aq.asq_last_status);
1553 aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid,
1554 del_list, num_del, NULL);
1558 dev_info(&pf->pdev->dev,
1559 "ignoring delete macvlan error, err %d, aq_err %d\n",
1560 aq_ret, pf->hw.aq.asq_last_status);
1566 /* do all the adds now */
1567 filter_list_len = pf->hw.aq.asq_buf_size /
1568 sizeof(struct i40e_aqc_add_macvlan_element_data),
1569 add_list = kcalloc(filter_list_len,
1570 sizeof(struct i40e_aqc_add_macvlan_element_data),
1575 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
1579 if (f->counter == 0)
1582 add_happened = true;
1585 /* add to add array */
1586 memcpy(add_list[num_add].mac_addr,
1587 f->macaddr, ETH_ALEN);
1588 add_list[num_add].vlan_tag =
1590 (u16)(f->vlan == I40E_VLAN_ANY ? 0 : f->vlan));
1591 add_list[num_add].queue_number = 0;
1593 cmd_flags |= I40E_AQC_MACVLAN_ADD_PERFECT_MATCH;
1594 add_list[num_add].flags = cpu_to_le16(cmd_flags);
1597 /* flush a full buffer */
1598 if (num_add == filter_list_len) {
1599 aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid,
1606 memset(add_list, 0, sizeof(*add_list));
1610 aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid,
1611 add_list, num_add, NULL);
1617 if (add_happened && (!aq_ret)) {
1619 } else if (add_happened && (aq_ret)) {
1620 dev_info(&pf->pdev->dev,
1621 "add filter failed, err %d, aq_err %d\n",
1622 aq_ret, pf->hw.aq.asq_last_status);
1623 if ((pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOSPC) &&
1624 !test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
1626 promisc_forced_on = true;
1627 set_bit(__I40E_FILTER_OVERFLOW_PROMISC,
1629 dev_info(&pf->pdev->dev, "promiscuous mode forced on\n");
1634 /* check for changes in promiscuous modes */
1635 if (changed_flags & IFF_ALLMULTI) {
1636 bool cur_multipromisc;
1637 cur_multipromisc = !!(vsi->current_netdev_flags & IFF_ALLMULTI);
1638 aq_ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw,
1643 dev_info(&pf->pdev->dev,
1644 "set multi promisc failed, err %d, aq_err %d\n",
1645 aq_ret, pf->hw.aq.asq_last_status);
1647 if ((changed_flags & IFF_PROMISC) || promisc_forced_on) {
1649 cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) ||
1650 test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
1652 aq_ret = i40e_aq_set_vsi_unicast_promiscuous(&vsi->back->hw,
1656 dev_info(&pf->pdev->dev,
1657 "set uni promisc failed, err %d, aq_err %d\n",
1658 aq_ret, pf->hw.aq.asq_last_status);
1659 aq_ret = i40e_aq_set_vsi_broadcast(&vsi->back->hw,
1663 dev_info(&pf->pdev->dev,
1664 "set brdcast promisc failed, err %d, aq_err %d\n",
1665 aq_ret, pf->hw.aq.asq_last_status);
1668 clear_bit(__I40E_CONFIG_BUSY, &vsi->state);
1673 * i40e_sync_filters_subtask - Sync the VSI filter list with HW
1674 * @pf: board private structure
1676 static void i40e_sync_filters_subtask(struct i40e_pf *pf)
1680 if (!pf || !(pf->flags & I40E_FLAG_FILTER_SYNC))
1682 pf->flags &= ~I40E_FLAG_FILTER_SYNC;
1684 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
1686 (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED))
1687 i40e_sync_vsi_filters(pf->vsi[v]);
1692 * i40e_change_mtu - NDO callback to change the Maximum Transfer Unit
1693 * @netdev: network interface device structure
1694 * @new_mtu: new value for maximum frame size
1696 * Returns 0 on success, negative on failure
1698 static int i40e_change_mtu(struct net_device *netdev, int new_mtu)
1700 struct i40e_netdev_priv *np = netdev_priv(netdev);
1701 int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
1702 struct i40e_vsi *vsi = np->vsi;
1704 /* MTU < 68 is an error and causes problems on some kernels */
1705 if ((new_mtu < 68) || (max_frame > I40E_MAX_RXBUFFER))
1708 netdev_info(netdev, "changing MTU from %d to %d\n",
1709 netdev->mtu, new_mtu);
1710 netdev->mtu = new_mtu;
1711 if (netif_running(netdev))
1712 i40e_vsi_reinit_locked(vsi);
1718 * i40e_ioctl - Access the hwtstamp interface
1719 * @netdev: network interface device structure
1720 * @ifr: interface request data
1721 * @cmd: ioctl command
1723 int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
1725 struct i40e_netdev_priv *np = netdev_priv(netdev);
1726 struct i40e_pf *pf = np->vsi->back;
1730 return i40e_ptp_get_ts_config(pf, ifr);
1732 return i40e_ptp_set_ts_config(pf, ifr);
1739 * i40e_vlan_stripping_enable - Turn on vlan stripping for the VSI
1740 * @vsi: the vsi being adjusted
1742 void i40e_vlan_stripping_enable(struct i40e_vsi *vsi)
1744 struct i40e_vsi_context ctxt;
1747 if ((vsi->info.valid_sections &
1748 cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
1749 ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_MODE_MASK) == 0))
1750 return; /* already enabled */
1752 vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
1753 vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_ALL |
1754 I40E_AQ_VSI_PVLAN_EMOD_STR_BOTH;
1756 ctxt.seid = vsi->seid;
1757 memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
1758 ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
1760 dev_info(&vsi->back->pdev->dev,
1761 "%s: update vsi failed, aq_err=%d\n",
1762 __func__, vsi->back->hw.aq.asq_last_status);
1767 * i40e_vlan_stripping_disable - Turn off vlan stripping for the VSI
1768 * @vsi: the vsi being adjusted
1770 void i40e_vlan_stripping_disable(struct i40e_vsi *vsi)
1772 struct i40e_vsi_context ctxt;
1775 if ((vsi->info.valid_sections &
1776 cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
1777 ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_EMOD_MASK) ==
1778 I40E_AQ_VSI_PVLAN_EMOD_MASK))
1779 return; /* already disabled */
1781 vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
1782 vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_ALL |
1783 I40E_AQ_VSI_PVLAN_EMOD_NOTHING;
1785 ctxt.seid = vsi->seid;
1786 memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
1787 ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
1789 dev_info(&vsi->back->pdev->dev,
1790 "%s: update vsi failed, aq_err=%d\n",
1791 __func__, vsi->back->hw.aq.asq_last_status);
1796 * i40e_vlan_rx_register - Setup or shutdown vlan offload
1797 * @netdev: network interface to be adjusted
1798 * @features: netdev features to test if VLAN offload is enabled or not
1800 static void i40e_vlan_rx_register(struct net_device *netdev, u32 features)
1802 struct i40e_netdev_priv *np = netdev_priv(netdev);
1803 struct i40e_vsi *vsi = np->vsi;
1805 if (features & NETIF_F_HW_VLAN_CTAG_RX)
1806 i40e_vlan_stripping_enable(vsi);
1808 i40e_vlan_stripping_disable(vsi);
1812 * i40e_vsi_add_vlan - Add vsi membership for given vlan
1813 * @vsi: the vsi being configured
1814 * @vid: vlan id to be added (0 = untagged only , -1 = any)
1816 int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
1818 struct i40e_mac_filter *f, *add_f;
1819 bool is_netdev, is_vf;
1821 is_vf = (vsi->type == I40E_VSI_SRIOV);
1822 is_netdev = !!(vsi->netdev);
1825 add_f = i40e_add_filter(vsi, vsi->netdev->dev_addr, vid,
1828 dev_info(&vsi->back->pdev->dev,
1829 "Could not add vlan filter %d for %pM\n",
1830 vid, vsi->netdev->dev_addr);
1835 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1836 add_f = i40e_add_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
1838 dev_info(&vsi->back->pdev->dev,
1839 "Could not add vlan filter %d for %pM\n",
1845 /* Now if we add a vlan tag, make sure to check if it is the first
1846 * tag (i.e. a "tag" -1 does exist) and if so replace the -1 "tag"
1847 * with 0, so we now accept untagged and specified tagged traffic
1848 * (and not any taged and untagged)
1851 if (is_netdev && i40e_find_filter(vsi, vsi->netdev->dev_addr,
1853 is_vf, is_netdev)) {
1854 i40e_del_filter(vsi, vsi->netdev->dev_addr,
1855 I40E_VLAN_ANY, is_vf, is_netdev);
1856 add_f = i40e_add_filter(vsi, vsi->netdev->dev_addr, 0,
1859 dev_info(&vsi->back->pdev->dev,
1860 "Could not add filter 0 for %pM\n",
1861 vsi->netdev->dev_addr);
1867 /* Do not assume that I40E_VLAN_ANY should be reset to VLAN 0 */
1868 if (vid > 0 && !vsi->info.pvid) {
1869 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1870 if (i40e_find_filter(vsi, f->macaddr, I40E_VLAN_ANY,
1871 is_vf, is_netdev)) {
1872 i40e_del_filter(vsi, f->macaddr, I40E_VLAN_ANY,
1874 add_f = i40e_add_filter(vsi, f->macaddr,
1875 0, is_vf, is_netdev);
1877 dev_info(&vsi->back->pdev->dev,
1878 "Could not add filter 0 for %pM\n",
1886 if (test_bit(__I40E_DOWN, &vsi->back->state) ||
1887 test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
1890 return i40e_sync_vsi_filters(vsi);
1894 * i40e_vsi_kill_vlan - Remove vsi membership for given vlan
1895 * @vsi: the vsi being configured
1896 * @vid: vlan id to be removed (0 = untagged only , -1 = any)
1898 * Return: 0 on success or negative otherwise
1900 int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
1902 struct net_device *netdev = vsi->netdev;
1903 struct i40e_mac_filter *f, *add_f;
1904 bool is_vf, is_netdev;
1905 int filter_count = 0;
1907 is_vf = (vsi->type == I40E_VSI_SRIOV);
1908 is_netdev = !!(netdev);
1911 i40e_del_filter(vsi, netdev->dev_addr, vid, is_vf, is_netdev);
1913 list_for_each_entry(f, &vsi->mac_filter_list, list)
1914 i40e_del_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
1916 /* go through all the filters for this VSI and if there is only
1917 * vid == 0 it means there are no other filters, so vid 0 must
1918 * be replaced with -1. This signifies that we should from now
1919 * on accept any traffic (with any tag present, or untagged)
1921 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1924 ether_addr_equal(netdev->dev_addr, f->macaddr))
1932 if (!filter_count && is_netdev) {
1933 i40e_del_filter(vsi, netdev->dev_addr, 0, is_vf, is_netdev);
1934 f = i40e_add_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY,
1937 dev_info(&vsi->back->pdev->dev,
1938 "Could not add filter %d for %pM\n",
1939 I40E_VLAN_ANY, netdev->dev_addr);
1944 if (!filter_count) {
1945 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1946 i40e_del_filter(vsi, f->macaddr, 0, is_vf, is_netdev);
1947 add_f = i40e_add_filter(vsi, f->macaddr, I40E_VLAN_ANY,
1950 dev_info(&vsi->back->pdev->dev,
1951 "Could not add filter %d for %pM\n",
1952 I40E_VLAN_ANY, f->macaddr);
1958 if (test_bit(__I40E_DOWN, &vsi->back->state) ||
1959 test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
1962 return i40e_sync_vsi_filters(vsi);
1966 * i40e_vlan_rx_add_vid - Add a vlan id filter to HW offload
1967 * @netdev: network interface to be adjusted
1968 * @vid: vlan id to be added
1970 * net_device_ops implementation for adding vlan ids
1972 static int i40e_vlan_rx_add_vid(struct net_device *netdev,
1973 __always_unused __be16 proto, u16 vid)
1975 struct i40e_netdev_priv *np = netdev_priv(netdev);
1976 struct i40e_vsi *vsi = np->vsi;
1982 netdev_info(netdev, "adding %pM vid=%d\n", netdev->dev_addr, vid);
1984 /* If the network stack called us with vid = 0 then
1985 * it is asking to receive priority tagged packets with
1986 * vlan id 0. Our HW receives them by default when configured
1987 * to receive untagged packets so there is no need to add an
1988 * extra filter for vlan 0 tagged packets.
1991 ret = i40e_vsi_add_vlan(vsi, vid);
1993 if (!ret && (vid < VLAN_N_VID))
1994 set_bit(vid, vsi->active_vlans);
2000 * i40e_vlan_rx_kill_vid - Remove a vlan id filter from HW offload
2001 * @netdev: network interface to be adjusted
2002 * @vid: vlan id to be removed
2004 * net_device_ops implementation for removing vlan ids
2006 static int i40e_vlan_rx_kill_vid(struct net_device *netdev,
2007 __always_unused __be16 proto, u16 vid)
2009 struct i40e_netdev_priv *np = netdev_priv(netdev);
2010 struct i40e_vsi *vsi = np->vsi;
2012 netdev_info(netdev, "removing %pM vid=%d\n", netdev->dev_addr, vid);
2014 /* return code is ignored as there is nothing a user
2015 * can do about failure to remove and a log message was
2016 * already printed from the other function
2018 i40e_vsi_kill_vlan(vsi, vid);
2020 clear_bit(vid, vsi->active_vlans);
2026 * i40e_restore_vlan - Reinstate vlans when vsi/netdev comes back up
2027 * @vsi: the vsi being brought back up
2029 static void i40e_restore_vlan(struct i40e_vsi *vsi)
2036 i40e_vlan_rx_register(vsi->netdev, vsi->netdev->features);
2038 for_each_set_bit(vid, vsi->active_vlans, VLAN_N_VID)
2039 i40e_vlan_rx_add_vid(vsi->netdev, htons(ETH_P_8021Q),
2044 * i40e_vsi_add_pvid - Add pvid for the VSI
2045 * @vsi: the vsi being adjusted
2046 * @vid: the vlan id to set as a PVID
2048 int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid)
2050 struct i40e_vsi_context ctxt;
2053 vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
2054 vsi->info.pvid = cpu_to_le16(vid);
2055 vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_TAGGED |
2056 I40E_AQ_VSI_PVLAN_INSERT_PVID |
2057 I40E_AQ_VSI_PVLAN_EMOD_STR;
2059 ctxt.seid = vsi->seid;
2060 memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
2061 aq_ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
2063 dev_info(&vsi->back->pdev->dev,
2064 "%s: update vsi failed, aq_err=%d\n",
2065 __func__, vsi->back->hw.aq.asq_last_status);
2073 * i40e_vsi_remove_pvid - Remove the pvid from the VSI
2074 * @vsi: the vsi being adjusted
2076 * Just use the vlan_rx_register() service to put it back to normal
2078 void i40e_vsi_remove_pvid(struct i40e_vsi *vsi)
2080 i40e_vlan_stripping_disable(vsi);
2086 * i40e_vsi_setup_tx_resources - Allocate VSI Tx queue resources
2087 * @vsi: ptr to the VSI
2089 * If this function returns with an error, then it's possible one or
2090 * more of the rings is populated (while the rest are not). It is the
2091 * callers duty to clean those orphaned rings.
2093 * Return 0 on success, negative on failure
2095 static int i40e_vsi_setup_tx_resources(struct i40e_vsi *vsi)
2099 for (i = 0; i < vsi->num_queue_pairs && !err; i++)
2100 err = i40e_setup_tx_descriptors(vsi->tx_rings[i]);
2106 * i40e_vsi_free_tx_resources - Free Tx resources for VSI queues
2107 * @vsi: ptr to the VSI
2109 * Free VSI's transmit software resources
2111 static void i40e_vsi_free_tx_resources(struct i40e_vsi *vsi)
2118 for (i = 0; i < vsi->num_queue_pairs; i++)
2119 if (vsi->tx_rings[i] && vsi->tx_rings[i]->desc)
2120 i40e_free_tx_resources(vsi->tx_rings[i]);
2124 * i40e_vsi_setup_rx_resources - Allocate VSI queues Rx resources
2125 * @vsi: ptr to the VSI
2127 * If this function returns with an error, then it's possible one or
2128 * more of the rings is populated (while the rest are not). It is the
2129 * callers duty to clean those orphaned rings.
2131 * Return 0 on success, negative on failure
2133 static int i40e_vsi_setup_rx_resources(struct i40e_vsi *vsi)
2137 for (i = 0; i < vsi->num_queue_pairs && !err; i++)
2138 err = i40e_setup_rx_descriptors(vsi->rx_rings[i]);
2143 * i40e_vsi_free_rx_resources - Free Rx Resources for VSI queues
2144 * @vsi: ptr to the VSI
2146 * Free all receive software resources
2148 static void i40e_vsi_free_rx_resources(struct i40e_vsi *vsi)
2155 for (i = 0; i < vsi->num_queue_pairs; i++)
2156 if (vsi->rx_rings[i] && vsi->rx_rings[i]->desc)
2157 i40e_free_rx_resources(vsi->rx_rings[i]);
2161 * i40e_configure_tx_ring - Configure a transmit ring context and rest
2162 * @ring: The Tx ring to configure
2164 * Configure the Tx descriptor ring in the HMC context.
2166 static int i40e_configure_tx_ring(struct i40e_ring *ring)
2168 struct i40e_vsi *vsi = ring->vsi;
2169 u16 pf_q = vsi->base_queue + ring->queue_index;
2170 struct i40e_hw *hw = &vsi->back->hw;
2171 struct i40e_hmc_obj_txq tx_ctx;
2172 i40e_status err = 0;
2175 /* some ATR related tx ring init */
2176 if (vsi->back->flags & I40E_FLAG_FD_ATR_ENABLED) {
2177 ring->atr_sample_rate = vsi->back->atr_sample_rate;
2178 ring->atr_count = 0;
2180 ring->atr_sample_rate = 0;
2183 /* initialize XPS */
2184 if (ring->q_vector && ring->netdev &&
2185 vsi->tc_config.numtc <= 1 &&
2186 !test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state))
2187 netif_set_xps_queue(ring->netdev,
2188 &ring->q_vector->affinity_mask,
2191 /* clear the context structure first */
2192 memset(&tx_ctx, 0, sizeof(tx_ctx));
2194 tx_ctx.new_context = 1;
2195 tx_ctx.base = (ring->dma / 128);
2196 tx_ctx.qlen = ring->count;
2197 tx_ctx.fd_ena = !!(vsi->back->flags & (I40E_FLAG_FD_SB_ENABLED |
2198 I40E_FLAG_FD_ATR_ENABLED));
2199 tx_ctx.timesync_ena = !!(vsi->back->flags & I40E_FLAG_PTP);
2200 /* FDIR VSI tx ring can still use RS bit and writebacks */
2201 if (vsi->type != I40E_VSI_FDIR)
2202 tx_ctx.head_wb_ena = 1;
2203 tx_ctx.head_wb_addr = ring->dma +
2204 (ring->count * sizeof(struct i40e_tx_desc));
2206 /* As part of VSI creation/update, FW allocates certain
2207 * Tx arbitration queue sets for each TC enabled for
2208 * the VSI. The FW returns the handles to these queue
2209 * sets as part of the response buffer to Add VSI,
2210 * Update VSI, etc. AQ commands. It is expected that
2211 * these queue set handles be associated with the Tx
2212 * queues by the driver as part of the TX queue context
2213 * initialization. This has to be done regardless of
2214 * DCB as by default everything is mapped to TC0.
2216 tx_ctx.rdylist = le16_to_cpu(vsi->info.qs_handle[ring->dcb_tc]);
2217 tx_ctx.rdylist_act = 0;
2219 /* clear the context in the HMC */
2220 err = i40e_clear_lan_tx_queue_context(hw, pf_q);
2222 dev_info(&vsi->back->pdev->dev,
2223 "Failed to clear LAN Tx queue context on Tx ring %d (pf_q %d), error: %d\n",
2224 ring->queue_index, pf_q, err);
2228 /* set the context in the HMC */
2229 err = i40e_set_lan_tx_queue_context(hw, pf_q, &tx_ctx);
2231 dev_info(&vsi->back->pdev->dev,
2232 "Failed to set LAN Tx queue context on Tx ring %d (pf_q %d, error: %d\n",
2233 ring->queue_index, pf_q, err);
2237 /* Now associate this queue with this PCI function */
2238 if (vsi->type == I40E_VSI_VMDQ2)
2239 qtx_ctl = I40E_QTX_CTL_VM_QUEUE;
2241 qtx_ctl = I40E_QTX_CTL_PF_QUEUE;
2242 qtx_ctl |= ((hw->pf_id << I40E_QTX_CTL_PF_INDX_SHIFT) &
2243 I40E_QTX_CTL_PF_INDX_MASK);
2244 wr32(hw, I40E_QTX_CTL(pf_q), qtx_ctl);
2247 clear_bit(__I40E_HANG_CHECK_ARMED, &ring->state);
2249 /* cache tail off for easier writes later */
2250 ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q);
2256 * i40e_configure_rx_ring - Configure a receive ring context
2257 * @ring: The Rx ring to configure
2259 * Configure the Rx descriptor ring in the HMC context.
2261 static int i40e_configure_rx_ring(struct i40e_ring *ring)
2263 struct i40e_vsi *vsi = ring->vsi;
2264 u32 chain_len = vsi->back->hw.func_caps.rx_buf_chain_len;
2265 u16 pf_q = vsi->base_queue + ring->queue_index;
2266 struct i40e_hw *hw = &vsi->back->hw;
2267 struct i40e_hmc_obj_rxq rx_ctx;
2268 i40e_status err = 0;
2272 /* clear the context structure first */
2273 memset(&rx_ctx, 0, sizeof(rx_ctx));
2275 ring->rx_buf_len = vsi->rx_buf_len;
2276 ring->rx_hdr_len = vsi->rx_hdr_len;
2278 rx_ctx.dbuff = ring->rx_buf_len >> I40E_RXQ_CTX_DBUFF_SHIFT;
2279 rx_ctx.hbuff = ring->rx_hdr_len >> I40E_RXQ_CTX_HBUFF_SHIFT;
2281 rx_ctx.base = (ring->dma / 128);
2282 rx_ctx.qlen = ring->count;
2284 if (vsi->back->flags & I40E_FLAG_16BYTE_RX_DESC_ENABLED) {
2285 set_ring_16byte_desc_enabled(ring);
2291 rx_ctx.dtype = vsi->dtype;
2293 set_ring_ps_enabled(ring);
2294 rx_ctx.hsplit_0 = I40E_RX_SPLIT_L2 |
2296 I40E_RX_SPLIT_TCP_UDP |
2299 rx_ctx.hsplit_0 = 0;
2302 rx_ctx.rxmax = min_t(u16, vsi->max_frame,
2303 (chain_len * ring->rx_buf_len));
2304 rx_ctx.tphrdesc_ena = 1;
2305 rx_ctx.tphwdesc_ena = 1;
2306 rx_ctx.tphdata_ena = 1;
2307 rx_ctx.tphhead_ena = 1;
2308 if (hw->revision_id == 0)
2309 rx_ctx.lrxqthresh = 0;
2311 rx_ctx.lrxqthresh = 2;
2312 rx_ctx.crcstrip = 1;
2315 /* set the prefena field to 1 because the manual says to */
2318 /* clear the context in the HMC */
2319 err = i40e_clear_lan_rx_queue_context(hw, pf_q);
2321 dev_info(&vsi->back->pdev->dev,
2322 "Failed to clear LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
2323 ring->queue_index, pf_q, err);
2327 /* set the context in the HMC */
2328 err = i40e_set_lan_rx_queue_context(hw, pf_q, &rx_ctx);
2330 dev_info(&vsi->back->pdev->dev,
2331 "Failed to set LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
2332 ring->queue_index, pf_q, err);
2336 /* cache tail for quicker writes, and clear the reg before use */
2337 ring->tail = hw->hw_addr + I40E_QRX_TAIL(pf_q);
2338 writel(0, ring->tail);
2340 i40e_alloc_rx_buffers(ring, I40E_DESC_UNUSED(ring));
2346 * i40e_vsi_configure_tx - Configure the VSI for Tx
2347 * @vsi: VSI structure describing this set of rings and resources
2349 * Configure the Tx VSI for operation.
2351 static int i40e_vsi_configure_tx(struct i40e_vsi *vsi)
2356 for (i = 0; (i < vsi->num_queue_pairs) && !err; i++)
2357 err = i40e_configure_tx_ring(vsi->tx_rings[i]);
2363 * i40e_vsi_configure_rx - Configure the VSI for Rx
2364 * @vsi: the VSI being configured
2366 * Configure the Rx VSI for operation.
2368 static int i40e_vsi_configure_rx(struct i40e_vsi *vsi)
2373 if (vsi->netdev && (vsi->netdev->mtu > ETH_DATA_LEN))
2374 vsi->max_frame = vsi->netdev->mtu + ETH_HLEN
2375 + ETH_FCS_LEN + VLAN_HLEN;
2377 vsi->max_frame = I40E_RXBUFFER_2048;
2379 /* figure out correct receive buffer length */
2380 switch (vsi->back->flags & (I40E_FLAG_RX_1BUF_ENABLED |
2381 I40E_FLAG_RX_PS_ENABLED)) {
2382 case I40E_FLAG_RX_1BUF_ENABLED:
2383 vsi->rx_hdr_len = 0;
2384 vsi->rx_buf_len = vsi->max_frame;
2385 vsi->dtype = I40E_RX_DTYPE_NO_SPLIT;
2387 case I40E_FLAG_RX_PS_ENABLED:
2388 vsi->rx_hdr_len = I40E_RX_HDR_SIZE;
2389 vsi->rx_buf_len = I40E_RXBUFFER_2048;
2390 vsi->dtype = I40E_RX_DTYPE_HEADER_SPLIT;
2393 vsi->rx_hdr_len = I40E_RX_HDR_SIZE;
2394 vsi->rx_buf_len = I40E_RXBUFFER_2048;
2395 vsi->dtype = I40E_RX_DTYPE_SPLIT_ALWAYS;
2399 /* round up for the chip's needs */
2400 vsi->rx_hdr_len = ALIGN(vsi->rx_hdr_len,
2401 (1 << I40E_RXQ_CTX_HBUFF_SHIFT));
2402 vsi->rx_buf_len = ALIGN(vsi->rx_buf_len,
2403 (1 << I40E_RXQ_CTX_DBUFF_SHIFT));
2405 /* set up individual rings */
2406 for (i = 0; i < vsi->num_queue_pairs && !err; i++)
2407 err = i40e_configure_rx_ring(vsi->rx_rings[i]);
2413 * i40e_vsi_config_dcb_rings - Update rings to reflect DCB TC
2414 * @vsi: ptr to the VSI
2416 static void i40e_vsi_config_dcb_rings(struct i40e_vsi *vsi)
2418 u16 qoffset, qcount;
2421 if (!(vsi->back->flags & I40E_FLAG_DCB_ENABLED))
2424 for (n = 0; n < I40E_MAX_TRAFFIC_CLASS; n++) {
2425 if (!(vsi->tc_config.enabled_tc & (1 << n)))
2428 qoffset = vsi->tc_config.tc_info[n].qoffset;
2429 qcount = vsi->tc_config.tc_info[n].qcount;
2430 for (i = qoffset; i < (qoffset + qcount); i++) {
2431 struct i40e_ring *rx_ring = vsi->rx_rings[i];
2432 struct i40e_ring *tx_ring = vsi->tx_rings[i];
2433 rx_ring->dcb_tc = n;
2434 tx_ring->dcb_tc = n;
2440 * i40e_set_vsi_rx_mode - Call set_rx_mode on a VSI
2441 * @vsi: ptr to the VSI
2443 static void i40e_set_vsi_rx_mode(struct i40e_vsi *vsi)
2446 i40e_set_rx_mode(vsi->netdev);
2450 * i40e_fdir_filter_restore - Restore the Sideband Flow Director filters
2451 * @vsi: Pointer to the targeted VSI
2453 * This function replays the hlist on the hw where all the SB Flow Director
2454 * filters were saved.
2456 static void i40e_fdir_filter_restore(struct i40e_vsi *vsi)
2458 struct i40e_fdir_filter *filter;
2459 struct i40e_pf *pf = vsi->back;
2460 struct hlist_node *node;
2462 if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
2465 hlist_for_each_entry_safe(filter, node,
2466 &pf->fdir_filter_list, fdir_node) {
2467 i40e_add_del_fdir(vsi, filter, true);
2472 * i40e_vsi_configure - Set up the VSI for action
2473 * @vsi: the VSI being configured
2475 static int i40e_vsi_configure(struct i40e_vsi *vsi)
2479 i40e_set_vsi_rx_mode(vsi);
2480 i40e_restore_vlan(vsi);
2481 i40e_vsi_config_dcb_rings(vsi);
2482 err = i40e_vsi_configure_tx(vsi);
2484 err = i40e_vsi_configure_rx(vsi);
2490 * i40e_vsi_configure_msix - MSIX mode Interrupt Config in the HW
2491 * @vsi: the VSI being configured
2493 static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
2495 struct i40e_pf *pf = vsi->back;
2496 struct i40e_q_vector *q_vector;
2497 struct i40e_hw *hw = &pf->hw;
2503 /* The interrupt indexing is offset by 1 in the PFINT_ITRn
2504 * and PFINT_LNKLSTn registers, e.g.:
2505 * PFINT_ITRn[0..n-1] gets msix-1..msix-n (qpair interrupts)
2507 qp = vsi->base_queue;
2508 vector = vsi->base_vector;
2509 for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
2510 q_vector = vsi->q_vectors[i];
2511 q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
2512 q_vector->rx.latency_range = I40E_LOW_LATENCY;
2513 wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1),
2515 q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
2516 q_vector->tx.latency_range = I40E_LOW_LATENCY;
2517 wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1),
2520 /* Linked list for the queuepairs assigned to this vector */
2521 wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), qp);
2522 for (q = 0; q < q_vector->num_ringpairs; q++) {
2523 val = I40E_QINT_RQCTL_CAUSE_ENA_MASK |
2524 (I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
2525 (vector << I40E_QINT_RQCTL_MSIX_INDX_SHIFT) |
2526 (qp << I40E_QINT_RQCTL_NEXTQ_INDX_SHIFT)|
2528 << I40E_QINT_RQCTL_NEXTQ_TYPE_SHIFT);
2530 wr32(hw, I40E_QINT_RQCTL(qp), val);
2532 val = I40E_QINT_TQCTL_CAUSE_ENA_MASK |
2533 (I40E_TX_ITR << I40E_QINT_TQCTL_ITR_INDX_SHIFT) |
2534 (vector << I40E_QINT_TQCTL_MSIX_INDX_SHIFT) |
2535 ((qp+1) << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT)|
2537 << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
2539 /* Terminate the linked list */
2540 if (q == (q_vector->num_ringpairs - 1))
2541 val |= (I40E_QUEUE_END_OF_LIST
2542 << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT);
2544 wr32(hw, I40E_QINT_TQCTL(qp), val);
2553 * i40e_enable_misc_int_causes - enable the non-queue interrupts
2554 * @hw: ptr to the hardware info
2556 static void i40e_enable_misc_int_causes(struct i40e_hw *hw)
2560 /* clear things first */
2561 wr32(hw, I40E_PFINT_ICR0_ENA, 0); /* disable all */
2562 rd32(hw, I40E_PFINT_ICR0); /* read to clear */
2564 val = I40E_PFINT_ICR0_ENA_ECC_ERR_MASK |
2565 I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK |
2566 I40E_PFINT_ICR0_ENA_GRST_MASK |
2567 I40E_PFINT_ICR0_ENA_PCI_EXCEPTION_MASK |
2568 I40E_PFINT_ICR0_ENA_GPIO_MASK |
2569 I40E_PFINT_ICR0_ENA_TIMESYNC_MASK |
2570 I40E_PFINT_ICR0_ENA_STORM_DETECT_MASK |
2571 I40E_PFINT_ICR0_ENA_HMC_ERR_MASK |
2572 I40E_PFINT_ICR0_ENA_VFLR_MASK |
2573 I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
2575 wr32(hw, I40E_PFINT_ICR0_ENA, val);
2577 /* SW_ITR_IDX = 0, but don't change INTENA */
2578 wr32(hw, I40E_PFINT_DYN_CTL0, I40E_PFINT_DYN_CTL0_SW_ITR_INDX_MASK |
2579 I40E_PFINT_DYN_CTL0_INTENA_MSK_MASK);
2581 /* OTHER_ITR_IDX = 0 */
2582 wr32(hw, I40E_PFINT_STAT_CTL0, 0);
2586 * i40e_configure_msi_and_legacy - Legacy mode interrupt config in the HW
2587 * @vsi: the VSI being configured
2589 static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
2591 struct i40e_q_vector *q_vector = vsi->q_vectors[0];
2592 struct i40e_pf *pf = vsi->back;
2593 struct i40e_hw *hw = &pf->hw;
2596 /* set the ITR configuration */
2597 q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
2598 q_vector->rx.latency_range = I40E_LOW_LATENCY;
2599 wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.itr);
2600 q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
2601 q_vector->tx.latency_range = I40E_LOW_LATENCY;
2602 wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.itr);
2604 i40e_enable_misc_int_causes(hw);
2606 /* FIRSTQ_INDX = 0, FIRSTQ_TYPE = 0 (rx) */
2607 wr32(hw, I40E_PFINT_LNKLST0, 0);
2609 /* Associate the queue pair to the vector and enable the queue int */
2610 val = I40E_QINT_RQCTL_CAUSE_ENA_MASK |
2611 (I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
2612 (I40E_QUEUE_TYPE_TX << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
2614 wr32(hw, I40E_QINT_RQCTL(0), val);
2616 val = I40E_QINT_TQCTL_CAUSE_ENA_MASK |
2617 (I40E_TX_ITR << I40E_QINT_TQCTL_ITR_INDX_SHIFT) |
2618 (I40E_QUEUE_END_OF_LIST << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT);
2620 wr32(hw, I40E_QINT_TQCTL(0), val);
2625 * i40e_irq_dynamic_disable_icr0 - Disable default interrupt generation for icr0
2626 * @pf: board private structure
2628 void i40e_irq_dynamic_disable_icr0(struct i40e_pf *pf)
2630 struct i40e_hw *hw = &pf->hw;
2632 wr32(hw, I40E_PFINT_DYN_CTL0,
2633 I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
2638 * i40e_irq_dynamic_enable_icr0 - Enable default interrupt generation for icr0
2639 * @pf: board private structure
2641 void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf)
2643 struct i40e_hw *hw = &pf->hw;
2646 val = I40E_PFINT_DYN_CTL0_INTENA_MASK |
2647 I40E_PFINT_DYN_CTL0_CLEARPBA_MASK |
2648 (I40E_ITR_NONE << I40E_PFINT_DYN_CTL0_ITR_INDX_SHIFT);
2650 wr32(hw, I40E_PFINT_DYN_CTL0, val);
2655 * i40e_irq_dynamic_enable - Enable default interrupt generation settings
2656 * @vsi: pointer to a vsi
2657 * @vector: enable a particular Hw Interrupt vector
2659 void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector)
2661 struct i40e_pf *pf = vsi->back;
2662 struct i40e_hw *hw = &pf->hw;
2665 val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
2666 I40E_PFINT_DYN_CTLN_CLEARPBA_MASK |
2667 (I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
2668 wr32(hw, I40E_PFINT_DYN_CTLN(vector - 1), val);
2669 /* skip the flush */
2673 * i40e_msix_clean_rings - MSIX mode Interrupt Handler
2674 * @irq: interrupt number
2675 * @data: pointer to a q_vector
2677 static irqreturn_t i40e_msix_clean_rings(int irq, void *data)
2679 struct i40e_q_vector *q_vector = data;
2681 if (!q_vector->tx.ring && !q_vector->rx.ring)
2684 napi_schedule(&q_vector->napi);
2690 * i40e_vsi_request_irq_msix - Initialize MSI-X interrupts
2691 * @vsi: the VSI being configured
2692 * @basename: name for the vector
2694 * Allocates MSI-X vectors and requests interrupts from the kernel.
2696 static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename)
2698 int q_vectors = vsi->num_q_vectors;
2699 struct i40e_pf *pf = vsi->back;
2700 int base = vsi->base_vector;
2705 for (vector = 0; vector < q_vectors; vector++) {
2706 struct i40e_q_vector *q_vector = vsi->q_vectors[vector];
2708 if (q_vector->tx.ring && q_vector->rx.ring) {
2709 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
2710 "%s-%s-%d", basename, "TxRx", rx_int_idx++);
2712 } else if (q_vector->rx.ring) {
2713 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
2714 "%s-%s-%d", basename, "rx", rx_int_idx++);
2715 } else if (q_vector->tx.ring) {
2716 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
2717 "%s-%s-%d", basename, "tx", tx_int_idx++);
2719 /* skip this unused q_vector */
2722 err = request_irq(pf->msix_entries[base + vector].vector,
2728 dev_info(&pf->pdev->dev,
2729 "%s: request_irq failed, error: %d\n",
2731 goto free_queue_irqs;
2733 /* assign the mask for this irq */
2734 irq_set_affinity_hint(pf->msix_entries[base + vector].vector,
2735 &q_vector->affinity_mask);
2743 irq_set_affinity_hint(pf->msix_entries[base + vector].vector,
2745 free_irq(pf->msix_entries[base + vector].vector,
2746 &(vsi->q_vectors[vector]));
2752 * i40e_vsi_disable_irq - Mask off queue interrupt generation on the VSI
2753 * @vsi: the VSI being un-configured
2755 static void i40e_vsi_disable_irq(struct i40e_vsi *vsi)
2757 struct i40e_pf *pf = vsi->back;
2758 struct i40e_hw *hw = &pf->hw;
2759 int base = vsi->base_vector;
2762 for (i = 0; i < vsi->num_queue_pairs; i++) {
2763 wr32(hw, I40E_QINT_TQCTL(vsi->tx_rings[i]->reg_idx), 0);
2764 wr32(hw, I40E_QINT_RQCTL(vsi->rx_rings[i]->reg_idx), 0);
2767 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
2768 for (i = vsi->base_vector;
2769 i < (vsi->num_q_vectors + vsi->base_vector); i++)
2770 wr32(hw, I40E_PFINT_DYN_CTLN(i - 1), 0);
2773 for (i = 0; i < vsi->num_q_vectors; i++)
2774 synchronize_irq(pf->msix_entries[i + base].vector);
2776 /* Legacy and MSI mode - this stops all interrupt handling */
2777 wr32(hw, I40E_PFINT_ICR0_ENA, 0);
2778 wr32(hw, I40E_PFINT_DYN_CTL0, 0);
2780 synchronize_irq(pf->pdev->irq);
2785 * i40e_vsi_enable_irq - Enable IRQ for the given VSI
2786 * @vsi: the VSI being configured
2788 static int i40e_vsi_enable_irq(struct i40e_vsi *vsi)
2790 struct i40e_pf *pf = vsi->back;
2793 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
2794 for (i = vsi->base_vector;
2795 i < (vsi->num_q_vectors + vsi->base_vector); i++)
2796 i40e_irq_dynamic_enable(vsi, i);
2798 i40e_irq_dynamic_enable_icr0(pf);
2801 i40e_flush(&pf->hw);
2806 * i40e_stop_misc_vector - Stop the vector that handles non-queue events
2807 * @pf: board private structure
2809 static void i40e_stop_misc_vector(struct i40e_pf *pf)
2812 wr32(&pf->hw, I40E_PFINT_ICR0_ENA, 0);
2813 i40e_flush(&pf->hw);
2817 * i40e_intr - MSI/Legacy and non-queue interrupt handler
2818 * @irq: interrupt number
2819 * @data: pointer to a q_vector
2821 * This is the handler used for all MSI/Legacy interrupts, and deals
2822 * with both queue and non-queue interrupts. This is also used in
2823 * MSIX mode to handle the non-queue interrupts.
2825 static irqreturn_t i40e_intr(int irq, void *data)
2827 struct i40e_pf *pf = (struct i40e_pf *)data;
2828 struct i40e_hw *hw = &pf->hw;
2829 irqreturn_t ret = IRQ_NONE;
2830 u32 icr0, icr0_remaining;
2833 icr0 = rd32(hw, I40E_PFINT_ICR0);
2834 ena_mask = rd32(hw, I40E_PFINT_ICR0_ENA);
2836 /* if sharing a legacy IRQ, we might get called w/o an intr pending */
2837 if ((icr0 & I40E_PFINT_ICR0_INTEVENT_MASK) == 0)
2840 /* if interrupt but no bits showing, must be SWINT */
2841 if (((icr0 & ~I40E_PFINT_ICR0_INTEVENT_MASK) == 0) ||
2842 (icr0 & I40E_PFINT_ICR0_SWINT_MASK))
2845 /* only q0 is used in MSI/Legacy mode, and none are used in MSIX */
2846 if (icr0 & I40E_PFINT_ICR0_QUEUE_0_MASK) {
2848 /* temporarily disable queue cause for NAPI processing */
2849 u32 qval = rd32(hw, I40E_QINT_RQCTL(0));
2850 qval &= ~I40E_QINT_RQCTL_CAUSE_ENA_MASK;
2851 wr32(hw, I40E_QINT_RQCTL(0), qval);
2853 qval = rd32(hw, I40E_QINT_TQCTL(0));
2854 qval &= ~I40E_QINT_TQCTL_CAUSE_ENA_MASK;
2855 wr32(hw, I40E_QINT_TQCTL(0), qval);
2857 if (!test_bit(__I40E_DOWN, &pf->state))
2858 napi_schedule(&pf->vsi[pf->lan_vsi]->q_vectors[0]->napi);
2861 if (icr0 & I40E_PFINT_ICR0_ADMINQ_MASK) {
2862 ena_mask &= ~I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
2863 set_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
2866 if (icr0 & I40E_PFINT_ICR0_MAL_DETECT_MASK) {
2867 ena_mask &= ~I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK;
2868 set_bit(__I40E_MDD_EVENT_PENDING, &pf->state);
2871 if (icr0 & I40E_PFINT_ICR0_VFLR_MASK) {
2872 ena_mask &= ~I40E_PFINT_ICR0_ENA_VFLR_MASK;
2873 set_bit(__I40E_VFLR_EVENT_PENDING, &pf->state);
2876 if (icr0 & I40E_PFINT_ICR0_GRST_MASK) {
2877 if (!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
2878 set_bit(__I40E_RESET_INTR_RECEIVED, &pf->state);
2879 ena_mask &= ~I40E_PFINT_ICR0_ENA_GRST_MASK;
2880 val = rd32(hw, I40E_GLGEN_RSTAT);
2881 val = (val & I40E_GLGEN_RSTAT_RESET_TYPE_MASK)
2882 >> I40E_GLGEN_RSTAT_RESET_TYPE_SHIFT;
2883 if (val == I40E_RESET_CORER) {
2885 } else if (val == I40E_RESET_GLOBR) {
2887 } else if (val == I40E_RESET_EMPR) {
2889 set_bit(__I40E_EMP_RESET_REQUESTED, &pf->state);
2893 if (icr0 & I40E_PFINT_ICR0_HMC_ERR_MASK) {
2894 icr0 &= ~I40E_PFINT_ICR0_HMC_ERR_MASK;
2895 dev_info(&pf->pdev->dev, "HMC error interrupt\n");
2898 if (icr0 & I40E_PFINT_ICR0_TIMESYNC_MASK) {
2899 u32 prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_0);
2901 if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK) {
2902 icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
2903 i40e_ptp_tx_hwtstamp(pf);
2907 /* If a critical error is pending we have no choice but to reset the
2909 * Report and mask out any remaining unexpected interrupts.
2911 icr0_remaining = icr0 & ena_mask;
2912 if (icr0_remaining) {
2913 dev_info(&pf->pdev->dev, "unhandled interrupt icr0=0x%08x\n",
2915 if ((icr0_remaining & I40E_PFINT_ICR0_PE_CRITERR_MASK) ||
2916 (icr0_remaining & I40E_PFINT_ICR0_PCI_EXCEPTION_MASK) ||
2917 (icr0_remaining & I40E_PFINT_ICR0_ECC_ERR_MASK)) {
2918 dev_info(&pf->pdev->dev, "device will be reset\n");
2919 set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
2920 i40e_service_event_schedule(pf);
2922 ena_mask &= ~icr0_remaining;
2927 /* re-enable interrupt causes */
2928 wr32(hw, I40E_PFINT_ICR0_ENA, ena_mask);
2929 if (!test_bit(__I40E_DOWN, &pf->state)) {
2930 i40e_service_event_schedule(pf);
2931 i40e_irq_dynamic_enable_icr0(pf);
2938 * i40e_clean_fdir_tx_irq - Reclaim resources after transmit completes
2939 * @tx_ring: tx ring to clean
2940 * @budget: how many cleans we're allowed
2942 * Returns true if there's any budget left (e.g. the clean is finished)
2944 static bool i40e_clean_fdir_tx_irq(struct i40e_ring *tx_ring, int budget)
2946 struct i40e_vsi *vsi = tx_ring->vsi;
2947 u16 i = tx_ring->next_to_clean;
2948 struct i40e_tx_buffer *tx_buf;
2949 struct i40e_tx_desc *tx_desc;
2951 tx_buf = &tx_ring->tx_bi[i];
2952 tx_desc = I40E_TX_DESC(tx_ring, i);
2953 i -= tx_ring->count;
2956 struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
2958 /* if next_to_watch is not set then there is no work pending */
2962 /* prevent any other reads prior to eop_desc */
2963 read_barrier_depends();
2965 /* if the descriptor isn't done, no work yet to do */
2966 if (!(eop_desc->cmd_type_offset_bsz &
2967 cpu_to_le64(I40E_TX_DESC_DTYPE_DESC_DONE)))
2970 /* clear next_to_watch to prevent false hangs */
2971 tx_buf->next_to_watch = NULL;
2973 /* unmap skb header data */
2974 dma_unmap_single(tx_ring->dev,
2975 dma_unmap_addr(tx_buf, dma),
2976 dma_unmap_len(tx_buf, len),
2979 dma_unmap_len_set(tx_buf, len, 0);
2982 /* move to the next desc and buffer to clean */
2987 i -= tx_ring->count;
2988 tx_buf = tx_ring->tx_bi;
2989 tx_desc = I40E_TX_DESC(tx_ring, 0);
2992 /* update budget accounting */
2994 } while (likely(budget));
2996 i += tx_ring->count;
2997 tx_ring->next_to_clean = i;
2999 if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
3000 i40e_irq_dynamic_enable(vsi,
3001 tx_ring->q_vector->v_idx + vsi->base_vector);
3007 * i40e_fdir_clean_ring - Interrupt Handler for FDIR SB ring
3008 * @irq: interrupt number
3009 * @data: pointer to a q_vector
3011 static irqreturn_t i40e_fdir_clean_ring(int irq, void *data)
3013 struct i40e_q_vector *q_vector = data;
3014 struct i40e_vsi *vsi;
3016 if (!q_vector->tx.ring)
3019 vsi = q_vector->tx.ring->vsi;
3020 i40e_clean_fdir_tx_irq(q_vector->tx.ring, vsi->work_limit);
3026 * i40e_map_vector_to_qp - Assigns the queue pair to the vector
3027 * @vsi: the VSI being configured
3028 * @v_idx: vector index
3029 * @qp_idx: queue pair index
3031 static void map_vector_to_qp(struct i40e_vsi *vsi, int v_idx, int qp_idx)
3033 struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
3034 struct i40e_ring *tx_ring = vsi->tx_rings[qp_idx];
3035 struct i40e_ring *rx_ring = vsi->rx_rings[qp_idx];
3037 tx_ring->q_vector = q_vector;
3038 tx_ring->next = q_vector->tx.ring;
3039 q_vector->tx.ring = tx_ring;
3040 q_vector->tx.count++;
3042 rx_ring->q_vector = q_vector;
3043 rx_ring->next = q_vector->rx.ring;
3044 q_vector->rx.ring = rx_ring;
3045 q_vector->rx.count++;
3049 * i40e_vsi_map_rings_to_vectors - Maps descriptor rings to vectors
3050 * @vsi: the VSI being configured
3052 * This function maps descriptor rings to the queue-specific vectors
3053 * we were allotted through the MSI-X enabling code. Ideally, we'd have
3054 * one vector per queue pair, but on a constrained vector budget, we
3055 * group the queue pairs as "efficiently" as possible.
3057 static void i40e_vsi_map_rings_to_vectors(struct i40e_vsi *vsi)
3059 int qp_remaining = vsi->num_queue_pairs;
3060 int q_vectors = vsi->num_q_vectors;
3065 /* If we don't have enough vectors for a 1-to-1 mapping, we'll have to
3066 * group them so there are multiple queues per vector.
3068 for (; v_start < q_vectors && qp_remaining; v_start++) {
3069 struct i40e_q_vector *q_vector = vsi->q_vectors[v_start];
3071 num_ringpairs = DIV_ROUND_UP(qp_remaining, q_vectors - v_start);
3073 q_vector->num_ringpairs = num_ringpairs;
3075 q_vector->rx.count = 0;
3076 q_vector->tx.count = 0;
3077 q_vector->rx.ring = NULL;
3078 q_vector->tx.ring = NULL;
3080 while (num_ringpairs--) {
3081 map_vector_to_qp(vsi, v_start, qp_idx);
3089 * i40e_vsi_request_irq - Request IRQ from the OS
3090 * @vsi: the VSI being configured
3091 * @basename: name for the vector
3093 static int i40e_vsi_request_irq(struct i40e_vsi *vsi, char *basename)
3095 struct i40e_pf *pf = vsi->back;
3098 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
3099 err = i40e_vsi_request_irq_msix(vsi, basename);
3100 else if (pf->flags & I40E_FLAG_MSI_ENABLED)
3101 err = request_irq(pf->pdev->irq, i40e_intr, 0,
3102 pf->misc_int_name, pf);
3104 err = request_irq(pf->pdev->irq, i40e_intr, IRQF_SHARED,
3105 pf->misc_int_name, pf);
3108 dev_info(&pf->pdev->dev, "request_irq failed, Error %d\n", err);
3113 #ifdef CONFIG_NET_POLL_CONTROLLER
3115 * i40e_netpoll - A Polling 'interrupt'handler
3116 * @netdev: network interface device structure
3118 * This is used by netconsole to send skbs without having to re-enable
3119 * interrupts. It's not called while the normal interrupt routine is executing.
3121 static void i40e_netpoll(struct net_device *netdev)
3123 struct i40e_netdev_priv *np = netdev_priv(netdev);
3124 struct i40e_vsi *vsi = np->vsi;
3125 struct i40e_pf *pf = vsi->back;
3128 /* if interface is down do nothing */
3129 if (test_bit(__I40E_DOWN, &vsi->state))
3132 pf->flags |= I40E_FLAG_IN_NETPOLL;
3133 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
3134 for (i = 0; i < vsi->num_q_vectors; i++)
3135 i40e_msix_clean_rings(0, vsi->q_vectors[i]);
3137 i40e_intr(pf->pdev->irq, netdev);
3139 pf->flags &= ~I40E_FLAG_IN_NETPOLL;
3144 * i40e_vsi_control_tx - Start or stop a VSI's rings
3145 * @vsi: the VSI being configured
3146 * @enable: start or stop the rings
3148 static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
3150 struct i40e_pf *pf = vsi->back;
3151 struct i40e_hw *hw = &pf->hw;
3155 pf_q = vsi->base_queue;
3156 for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
3157 for (j = 0; j < 50; j++) {
3158 tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
3159 if (((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT) & 1) ==
3160 ((tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT) & 1))
3162 usleep_range(1000, 2000);
3164 /* Skip if the queue is already in the requested state */
3165 if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
3168 /* turn on/off the queue */
3170 wr32(hw, I40E_QTX_HEAD(pf_q), 0);
3171 tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK;
3173 tx_reg &= ~I40E_QTX_ENA_QENA_REQ_MASK;
3176 wr32(hw, I40E_QTX_ENA(pf_q), tx_reg);
3178 /* wait for the change to finish */
3179 for (j = 0; j < 10; j++) {
3180 tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
3181 if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
3187 dev_info(&pf->pdev->dev, "Tx ring %d %sable timeout\n",
3188 pf_q, (enable ? "en" : "dis"));
3193 if (hw->revision_id == 0)
3200 * i40e_vsi_control_rx - Start or stop a VSI's rings
3201 * @vsi: the VSI being configured
3202 * @enable: start or stop the rings
3204 static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
3206 struct i40e_pf *pf = vsi->back;
3207 struct i40e_hw *hw = &pf->hw;
3211 pf_q = vsi->base_queue;
3212 for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
3213 for (j = 0; j < 50; j++) {
3214 rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
3215 if (((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT) & 1) ==
3216 ((rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT) & 1))
3218 usleep_range(1000, 2000);
3221 /* Skip if the queue is already in the requested state */
3222 if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
3225 /* turn on/off the queue */
3227 rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK;
3229 rx_reg &= ~I40E_QRX_ENA_QENA_REQ_MASK;
3230 wr32(hw, I40E_QRX_ENA(pf_q), rx_reg);
3232 /* wait for the change to finish */
3233 for (j = 0; j < 10; j++) {
3234 rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
3236 if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
3242 dev_info(&pf->pdev->dev, "Rx ring %d %sable timeout\n",
3243 pf_q, (enable ? "en" : "dis"));
3252 * i40e_vsi_control_rings - Start or stop a VSI's rings
3253 * @vsi: the VSI being configured
3254 * @enable: start or stop the rings
3256 int i40e_vsi_control_rings(struct i40e_vsi *vsi, bool request)
3260 /* do rx first for enable and last for disable */
3262 ret = i40e_vsi_control_rx(vsi, request);
3265 ret = i40e_vsi_control_tx(vsi, request);
3267 /* Ignore return value, we need to shutdown whatever we can */
3268 i40e_vsi_control_tx(vsi, request);
3269 i40e_vsi_control_rx(vsi, request);
3276 * i40e_vsi_free_irq - Free the irq association with the OS
3277 * @vsi: the VSI being configured
3279 static void i40e_vsi_free_irq(struct i40e_vsi *vsi)
3281 struct i40e_pf *pf = vsi->back;
3282 struct i40e_hw *hw = &pf->hw;
3283 int base = vsi->base_vector;
3287 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
3288 if (!vsi->q_vectors)
3291 for (i = 0; i < vsi->num_q_vectors; i++) {
3292 u16 vector = i + base;
3294 /* free only the irqs that were actually requested */
3295 if (!vsi->q_vectors[i] ||
3296 !vsi->q_vectors[i]->num_ringpairs)
3299 /* clear the affinity_mask in the IRQ descriptor */
3300 irq_set_affinity_hint(pf->msix_entries[vector].vector,
3302 free_irq(pf->msix_entries[vector].vector,
3305 /* Tear down the interrupt queue link list
3307 * We know that they come in pairs and always
3308 * the Rx first, then the Tx. To clear the
3309 * link list, stick the EOL value into the
3310 * next_q field of the registers.
3312 val = rd32(hw, I40E_PFINT_LNKLSTN(vector - 1));
3313 qp = (val & I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK)
3314 >> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
3315 val |= I40E_QUEUE_END_OF_LIST
3316 << I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
3317 wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), val);
3319 while (qp != I40E_QUEUE_END_OF_LIST) {
3322 val = rd32(hw, I40E_QINT_RQCTL(qp));
3324 val &= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK |
3325 I40E_QINT_RQCTL_MSIX0_INDX_MASK |
3326 I40E_QINT_RQCTL_CAUSE_ENA_MASK |
3327 I40E_QINT_RQCTL_INTEVENT_MASK);
3329 val |= (I40E_QINT_RQCTL_ITR_INDX_MASK |
3330 I40E_QINT_RQCTL_NEXTQ_INDX_MASK);
3332 wr32(hw, I40E_QINT_RQCTL(qp), val);
3334 val = rd32(hw, I40E_QINT_TQCTL(qp));
3336 next = (val & I40E_QINT_TQCTL_NEXTQ_INDX_MASK)
3337 >> I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT;
3339 val &= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK |
3340 I40E_QINT_TQCTL_MSIX0_INDX_MASK |
3341 I40E_QINT_TQCTL_CAUSE_ENA_MASK |
3342 I40E_QINT_TQCTL_INTEVENT_MASK);
3344 val |= (I40E_QINT_TQCTL_ITR_INDX_MASK |
3345 I40E_QINT_TQCTL_NEXTQ_INDX_MASK);
3347 wr32(hw, I40E_QINT_TQCTL(qp), val);
3352 free_irq(pf->pdev->irq, pf);
3354 val = rd32(hw, I40E_PFINT_LNKLST0);
3355 qp = (val & I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK)
3356 >> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
3357 val |= I40E_QUEUE_END_OF_LIST
3358 << I40E_PFINT_LNKLST0_FIRSTQ_INDX_SHIFT;
3359 wr32(hw, I40E_PFINT_LNKLST0, val);
3361 val = rd32(hw, I40E_QINT_RQCTL(qp));
3362 val &= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK |
3363 I40E_QINT_RQCTL_MSIX0_INDX_MASK |
3364 I40E_QINT_RQCTL_CAUSE_ENA_MASK |
3365 I40E_QINT_RQCTL_INTEVENT_MASK);
3367 val |= (I40E_QINT_RQCTL_ITR_INDX_MASK |
3368 I40E_QINT_RQCTL_NEXTQ_INDX_MASK);
3370 wr32(hw, I40E_QINT_RQCTL(qp), val);
3372 val = rd32(hw, I40E_QINT_TQCTL(qp));
3374 val &= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK |
3375 I40E_QINT_TQCTL_MSIX0_INDX_MASK |
3376 I40E_QINT_TQCTL_CAUSE_ENA_MASK |
3377 I40E_QINT_TQCTL_INTEVENT_MASK);
3379 val |= (I40E_QINT_TQCTL_ITR_INDX_MASK |
3380 I40E_QINT_TQCTL_NEXTQ_INDX_MASK);
3382 wr32(hw, I40E_QINT_TQCTL(qp), val);
3387 * i40e_free_q_vector - Free memory allocated for specific interrupt vector
3388 * @vsi: the VSI being configured
3389 * @v_idx: Index of vector to be freed
3391 * This function frees the memory allocated to the q_vector. In addition if
3392 * NAPI is enabled it will delete any references to the NAPI struct prior
3393 * to freeing the q_vector.
3395 static void i40e_free_q_vector(struct i40e_vsi *vsi, int v_idx)
3397 struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
3398 struct i40e_ring *ring;
3403 /* disassociate q_vector from rings */
3404 i40e_for_each_ring(ring, q_vector->tx)
3405 ring->q_vector = NULL;
3407 i40e_for_each_ring(ring, q_vector->rx)
3408 ring->q_vector = NULL;
3410 /* only VSI w/ an associated netdev is set up w/ NAPI */
3412 netif_napi_del(&q_vector->napi);
3414 vsi->q_vectors[v_idx] = NULL;
3416 kfree_rcu(q_vector, rcu);
3420 * i40e_vsi_free_q_vectors - Free memory allocated for interrupt vectors
3421 * @vsi: the VSI being un-configured
3423 * This frees the memory allocated to the q_vectors and
3424 * deletes references to the NAPI struct.
3426 static void i40e_vsi_free_q_vectors(struct i40e_vsi *vsi)
3430 for (v_idx = 0; v_idx < vsi->num_q_vectors; v_idx++)
3431 i40e_free_q_vector(vsi, v_idx);
3435 * i40e_reset_interrupt_capability - Disable interrupt setup in OS
3436 * @pf: board private structure
3438 static void i40e_reset_interrupt_capability(struct i40e_pf *pf)
3440 /* If we're in Legacy mode, the interrupt was cleaned in vsi_close */
3441 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
3442 pci_disable_msix(pf->pdev);
3443 kfree(pf->msix_entries);
3444 pf->msix_entries = NULL;
3445 } else if (pf->flags & I40E_FLAG_MSI_ENABLED) {
3446 pci_disable_msi(pf->pdev);
3448 pf->flags &= ~(I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED);
3452 * i40e_clear_interrupt_scheme - Clear the current interrupt scheme settings
3453 * @pf: board private structure
3455 * We go through and clear interrupt specific resources and reset the structure
3456 * to pre-load conditions
3458 static void i40e_clear_interrupt_scheme(struct i40e_pf *pf)
3462 i40e_put_lump(pf->irq_pile, 0, I40E_PILE_VALID_BIT-1);
3463 for (i = 0; i < pf->hw.func_caps.num_vsis; i++)
3465 i40e_vsi_free_q_vectors(pf->vsi[i]);
3466 i40e_reset_interrupt_capability(pf);
3470 * i40e_napi_enable_all - Enable NAPI for all q_vectors in the VSI
3471 * @vsi: the VSI being configured
3473 static void i40e_napi_enable_all(struct i40e_vsi *vsi)
3480 for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
3481 napi_enable(&vsi->q_vectors[q_idx]->napi);
3485 * i40e_napi_disable_all - Disable NAPI for all q_vectors in the VSI
3486 * @vsi: the VSI being configured
3488 static void i40e_napi_disable_all(struct i40e_vsi *vsi)
3495 for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
3496 napi_disable(&vsi->q_vectors[q_idx]->napi);
3500 * i40e_vsi_close - Shut down a VSI
3501 * @vsi: the vsi to be quelled
3503 static void i40e_vsi_close(struct i40e_vsi *vsi)
3505 if (!test_and_set_bit(__I40E_DOWN, &vsi->state))
3507 i40e_vsi_free_irq(vsi);
3508 i40e_vsi_free_tx_resources(vsi);
3509 i40e_vsi_free_rx_resources(vsi);
3513 * i40e_quiesce_vsi - Pause a given VSI
3514 * @vsi: the VSI being paused
3516 static void i40e_quiesce_vsi(struct i40e_vsi *vsi)
3518 if (test_bit(__I40E_DOWN, &vsi->state))
3521 set_bit(__I40E_NEEDS_RESTART, &vsi->state);
3522 if (vsi->netdev && netif_running(vsi->netdev)) {
3523 vsi->netdev->netdev_ops->ndo_stop(vsi->netdev);
3525 i40e_vsi_close(vsi);
3530 * i40e_unquiesce_vsi - Resume a given VSI
3531 * @vsi: the VSI being resumed
3533 static void i40e_unquiesce_vsi(struct i40e_vsi *vsi)
3535 if (!test_bit(__I40E_NEEDS_RESTART, &vsi->state))
3538 clear_bit(__I40E_NEEDS_RESTART, &vsi->state);
3539 if (vsi->netdev && netif_running(vsi->netdev))
3540 vsi->netdev->netdev_ops->ndo_open(vsi->netdev);
3542 i40e_vsi_open(vsi); /* this clears the DOWN bit */
3546 * i40e_pf_quiesce_all_vsi - Pause all VSIs on a PF
3549 static void i40e_pf_quiesce_all_vsi(struct i40e_pf *pf)
3553 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
3555 i40e_quiesce_vsi(pf->vsi[v]);
3560 * i40e_pf_unquiesce_all_vsi - Resume all VSIs on a PF
3563 static void i40e_pf_unquiesce_all_vsi(struct i40e_pf *pf)
3567 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
3569 i40e_unquiesce_vsi(pf->vsi[v]);
3574 * i40e_dcb_get_num_tc - Get the number of TCs from DCBx config
3575 * @dcbcfg: the corresponding DCBx configuration structure
3577 * Return the number of TCs from given DCBx configuration
3579 static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg)
3584 /* Scan the ETS Config Priority Table to find
3585 * traffic class enabled for a given priority
3586 * and use the traffic class index to get the
3587 * number of traffic classes enabled
3589 for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
3590 if (dcbcfg->etscfg.prioritytable[i] > num_tc)
3591 num_tc = dcbcfg->etscfg.prioritytable[i];
3594 /* Traffic class index starts from zero so
3595 * increment to return the actual count
3601 * i40e_dcb_get_enabled_tc - Get enabled traffic classes
3602 * @dcbcfg: the corresponding DCBx configuration structure
3604 * Query the current DCB configuration and return the number of
3605 * traffic classes enabled from the given DCBX config
3607 static u8 i40e_dcb_get_enabled_tc(struct i40e_dcbx_config *dcbcfg)
3609 u8 num_tc = i40e_dcb_get_num_tc(dcbcfg);
3613 for (i = 0; i < num_tc; i++)
3614 enabled_tc |= 1 << i;
3620 * i40e_pf_get_num_tc - Get enabled traffic classes for PF
3621 * @pf: PF being queried
3623 * Return number of traffic classes enabled for the given PF
3625 static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
3627 struct i40e_hw *hw = &pf->hw;
3630 struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
3632 /* If DCB is not enabled then always in single TC */
3633 if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
3636 /* MFP mode return count of enabled TCs for this PF */
3637 if (pf->flags & I40E_FLAG_MFP_ENABLED) {
3638 enabled_tc = pf->hw.func_caps.enabled_tcmap;
3639 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
3640 if (enabled_tc & (1 << i))
3646 /* SFP mode will be enabled for all TCs on port */
3647 return i40e_dcb_get_num_tc(dcbcfg);
3651 * i40e_pf_get_default_tc - Get bitmap for first enabled TC
3652 * @pf: PF being queried
3654 * Return a bitmap for first enabled traffic class for this PF.
3656 static u8 i40e_pf_get_default_tc(struct i40e_pf *pf)
3658 u8 enabled_tc = pf->hw.func_caps.enabled_tcmap;
3662 return 0x1; /* TC0 */
3664 /* Find the first enabled TC */
3665 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
3666 if (enabled_tc & (1 << i))
3674 * i40e_pf_get_pf_tc_map - Get bitmap for enabled traffic classes
3675 * @pf: PF being queried
3677 * Return a bitmap for enabled traffic classes for this PF.
3679 static u8 i40e_pf_get_tc_map(struct i40e_pf *pf)
3681 /* If DCB is not enabled for this PF then just return default TC */
3682 if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
3683 return i40e_pf_get_default_tc(pf);
3685 /* MFP mode will have enabled TCs set by FW */
3686 if (pf->flags & I40E_FLAG_MFP_ENABLED)
3687 return pf->hw.func_caps.enabled_tcmap;
3689 /* SFP mode we want PF to be enabled for all TCs */
3690 return i40e_dcb_get_enabled_tc(&pf->hw.local_dcbx_config);
3694 * i40e_vsi_get_bw_info - Query VSI BW Information
3695 * @vsi: the VSI being queried
3697 * Returns 0 on success, negative value on failure
3699 static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi)
3701 struct i40e_aqc_query_vsi_ets_sla_config_resp bw_ets_config = {0};
3702 struct i40e_aqc_query_vsi_bw_config_resp bw_config = {0};
3703 struct i40e_pf *pf = vsi->back;
3704 struct i40e_hw *hw = &pf->hw;
3709 /* Get the VSI level BW configuration */
3710 aq_ret = i40e_aq_query_vsi_bw_config(hw, vsi->seid, &bw_config, NULL);
3712 dev_info(&pf->pdev->dev,
3713 "couldn't get pf vsi bw config, err %d, aq_err %d\n",
3714 aq_ret, pf->hw.aq.asq_last_status);
3718 /* Get the VSI level BW configuration per TC */
3719 aq_ret = i40e_aq_query_vsi_ets_sla_config(hw, vsi->seid, &bw_ets_config,
3722 dev_info(&pf->pdev->dev,
3723 "couldn't get pf vsi ets bw config, err %d, aq_err %d\n",
3724 aq_ret, pf->hw.aq.asq_last_status);
3728 if (bw_config.tc_valid_bits != bw_ets_config.tc_valid_bits) {
3729 dev_info(&pf->pdev->dev,
3730 "Enabled TCs mismatch from querying VSI BW info 0x%08x 0x%08x\n",
3731 bw_config.tc_valid_bits,
3732 bw_ets_config.tc_valid_bits);
3733 /* Still continuing */
3736 vsi->bw_limit = le16_to_cpu(bw_config.port_bw_limit);
3737 vsi->bw_max_quanta = bw_config.max_bw;
3738 tc_bw_max = le16_to_cpu(bw_ets_config.tc_bw_max[0]) |
3739 (le16_to_cpu(bw_ets_config.tc_bw_max[1]) << 16);
3740 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
3741 vsi->bw_ets_share_credits[i] = bw_ets_config.share_credits[i];
3742 vsi->bw_ets_limit_credits[i] =
3743 le16_to_cpu(bw_ets_config.credits[i]);
3744 /* 3 bits out of 4 for each TC */
3745 vsi->bw_ets_max_quanta[i] = (u8)((tc_bw_max >> (i*4)) & 0x7);
3752 * i40e_vsi_configure_bw_alloc - Configure VSI BW allocation per TC
3753 * @vsi: the VSI being configured
3754 * @enabled_tc: TC bitmap
3755 * @bw_credits: BW shared credits per TC
3757 * Returns 0 on success, negative value on failure
3759 static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
3762 struct i40e_aqc_configure_vsi_tc_bw_data bw_data;
3766 bw_data.tc_valid_bits = enabled_tc;
3767 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
3768 bw_data.tc_bw_credits[i] = bw_share[i];
3770 aq_ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data,
3773 dev_info(&vsi->back->pdev->dev,
3774 "AQ command Config VSI BW allocation per TC failed = %d\n",
3775 vsi->back->hw.aq.asq_last_status);
3779 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
3780 vsi->info.qs_handle[i] = bw_data.qs_handles[i];
3786 * i40e_vsi_config_netdev_tc - Setup the netdev TC configuration
3787 * @vsi: the VSI being configured
3788 * @enabled_tc: TC map to be enabled
3791 static void i40e_vsi_config_netdev_tc(struct i40e_vsi *vsi, u8 enabled_tc)
3793 struct net_device *netdev = vsi->netdev;
3794 struct i40e_pf *pf = vsi->back;
3795 struct i40e_hw *hw = &pf->hw;
3798 struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
3804 netdev_reset_tc(netdev);
3808 /* Set up actual enabled TCs on the VSI */
3809 if (netdev_set_num_tc(netdev, vsi->tc_config.numtc))
3812 /* set per TC queues for the VSI */
3813 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
3814 /* Only set TC queues for enabled tcs
3816 * e.g. For a VSI that has TC0 and TC3 enabled the
3817 * enabled_tc bitmap would be 0x00001001; the driver
3818 * will set the numtc for netdev as 2 that will be
3819 * referenced by the netdev layer as TC 0 and 1.
3821 if (vsi->tc_config.enabled_tc & (1 << i))
3822 netdev_set_tc_queue(netdev,
3823 vsi->tc_config.tc_info[i].netdev_tc,
3824 vsi->tc_config.tc_info[i].qcount,
3825 vsi->tc_config.tc_info[i].qoffset);
3828 /* Assign UP2TC map for the VSI */
3829 for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
3830 /* Get the actual TC# for the UP */
3831 u8 ets_tc = dcbcfg->etscfg.prioritytable[i];
3832 /* Get the mapped netdev TC# for the UP */
3833 netdev_tc = vsi->tc_config.tc_info[ets_tc].netdev_tc;
3834 netdev_set_prio_tc_map(netdev, i, netdev_tc);
3839 * i40e_vsi_update_queue_map - Update our copy of VSi info with new queue map
3840 * @vsi: the VSI being configured
3841 * @ctxt: the ctxt buffer returned from AQ VSI update param command
3843 static void i40e_vsi_update_queue_map(struct i40e_vsi *vsi,
3844 struct i40e_vsi_context *ctxt)
3846 /* copy just the sections touched not the entire info
3847 * since not all sections are valid as returned by
3850 vsi->info.mapping_flags = ctxt->info.mapping_flags;
3851 memcpy(&vsi->info.queue_mapping,
3852 &ctxt->info.queue_mapping, sizeof(vsi->info.queue_mapping));
3853 memcpy(&vsi->info.tc_mapping, ctxt->info.tc_mapping,
3854 sizeof(vsi->info.tc_mapping));
3858 * i40e_vsi_config_tc - Configure VSI Tx Scheduler for given TC map
3859 * @vsi: VSI to be configured
3860 * @enabled_tc: TC bitmap
3862 * This configures a particular VSI for TCs that are mapped to the
3863 * given TC bitmap. It uses default bandwidth share for TCs across
3864 * VSIs to configure TC for a particular VSI.
3867 * It is expected that the VSI queues have been quisced before calling
3870 static int i40e_vsi_config_tc(struct i40e_vsi *vsi, u8 enabled_tc)
3872 u8 bw_share[I40E_MAX_TRAFFIC_CLASS] = {0};
3873 struct i40e_vsi_context ctxt;
3877 /* Check if enabled_tc is same as existing or new TCs */
3878 if (vsi->tc_config.enabled_tc == enabled_tc)
3881 /* Enable ETS TCs with equal BW Share for now across all VSIs */
3882 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
3883 if (enabled_tc & (1 << i))
3887 ret = i40e_vsi_configure_bw_alloc(vsi, enabled_tc, bw_share);
3889 dev_info(&vsi->back->pdev->dev,
3890 "Failed configuring TC map %d for VSI %d\n",
3891 enabled_tc, vsi->seid);
3895 /* Update Queue Pairs Mapping for currently enabled UPs */
3896 ctxt.seid = vsi->seid;
3897 ctxt.pf_num = vsi->back->hw.pf_id;
3899 ctxt.uplink_seid = vsi->uplink_seid;
3900 memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
3901 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, false);
3903 /* Update the VSI after updating the VSI queue-mapping information */
3904 ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
3906 dev_info(&vsi->back->pdev->dev,
3907 "update vsi failed, aq_err=%d\n",
3908 vsi->back->hw.aq.asq_last_status);
3911 /* update the local VSI info with updated queue map */
3912 i40e_vsi_update_queue_map(vsi, &ctxt);
3913 vsi->info.valid_sections = 0;
3915 /* Update current VSI BW information */
3916 ret = i40e_vsi_get_bw_info(vsi);
3918 dev_info(&vsi->back->pdev->dev,
3919 "Failed updating vsi bw info, aq_err=%d\n",
3920 vsi->back->hw.aq.asq_last_status);
3924 /* Update the netdev TC setup */
3925 i40e_vsi_config_netdev_tc(vsi, enabled_tc);
3931 * i40e_veb_config_tc - Configure TCs for given VEB
3933 * @enabled_tc: TC bitmap
3935 * Configures given TC bitmap for VEB (switching) element
3937 int i40e_veb_config_tc(struct i40e_veb *veb, u8 enabled_tc)
3939 struct i40e_aqc_configure_switching_comp_bw_config_data bw_data = {0};
3940 struct i40e_pf *pf = veb->pf;
3944 /* No TCs or already enabled TCs just return */
3945 if (!enabled_tc || veb->enabled_tc == enabled_tc)
3948 bw_data.tc_valid_bits = enabled_tc;
3949 /* bw_data.absolute_credits is not set (relative) */
3951 /* Enable ETS TCs with equal BW Share for now */
3952 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
3953 if (enabled_tc & (1 << i))
3954 bw_data.tc_bw_share_credits[i] = 1;
3957 ret = i40e_aq_config_switch_comp_bw_config(&pf->hw, veb->seid,
3960 dev_info(&pf->pdev->dev,
3961 "veb bw config failed, aq_err=%d\n",
3962 pf->hw.aq.asq_last_status);
3966 /* Update the BW information */
3967 ret = i40e_veb_get_bw_info(veb);
3969 dev_info(&pf->pdev->dev,
3970 "Failed getting veb bw config, aq_err=%d\n",
3971 pf->hw.aq.asq_last_status);
3978 #ifdef CONFIG_I40E_DCB
3980 * i40e_dcb_reconfigure - Reconfigure all VEBs and VSIs
3983 * Reconfigure VEB/VSIs on a given PF; it is assumed that
3984 * the caller would've quiesce all the VSIs before calling
3987 static void i40e_dcb_reconfigure(struct i40e_pf *pf)
3993 /* Enable the TCs available on PF to all VEBs */
3994 tc_map = i40e_pf_get_tc_map(pf);
3995 for (v = 0; v < I40E_MAX_VEB; v++) {
3998 ret = i40e_veb_config_tc(pf->veb[v], tc_map);
4000 dev_info(&pf->pdev->dev,
4001 "Failed configuring TC for VEB seid=%d\n",
4003 /* Will try to configure as many components */
4007 /* Update each VSI */
4008 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
4012 /* - Enable all TCs for the LAN VSI
4013 * - For all others keep them at TC0 for now
4015 if (v == pf->lan_vsi)
4016 tc_map = i40e_pf_get_tc_map(pf);
4018 tc_map = i40e_pf_get_default_tc(pf);
4020 ret = i40e_vsi_config_tc(pf->vsi[v], tc_map);
4022 dev_info(&pf->pdev->dev,
4023 "Failed configuring TC for VSI seid=%d\n",
4025 /* Will try to configure as many components */
4027 /* Re-configure VSI vectors based on updated TC map */
4028 i40e_vsi_map_rings_to_vectors(pf->vsi[v]);
4029 if (pf->vsi[v]->netdev)
4030 i40e_dcbnl_set_all(pf->vsi[v]);
4036 * i40e_init_pf_dcb - Initialize DCB configuration
4037 * @pf: PF being configured
4039 * Query the current DCB configuration and cache it
4040 * in the hardware structure
4042 static int i40e_init_pf_dcb(struct i40e_pf *pf)
4044 struct i40e_hw *hw = &pf->hw;
4047 if (pf->hw.func_caps.npar_enable)
4050 /* Get the initial DCB configuration */
4051 err = i40e_init_dcb(hw);
4053 /* Device/Function is not DCBX capable */
4054 if ((!hw->func_caps.dcb) ||
4055 (hw->dcbx_status == I40E_DCBX_STATUS_DISABLED)) {
4056 dev_info(&pf->pdev->dev,
4057 "DCBX offload is not supported or is disabled for this PF.\n");
4059 if (pf->flags & I40E_FLAG_MFP_ENABLED)
4063 /* When status is not DISABLED then DCBX in FW */
4064 pf->dcbx_cap = DCB_CAP_DCBX_LLD_MANAGED |
4065 DCB_CAP_DCBX_VER_IEEE;
4066 pf->flags |= I40E_FLAG_DCB_ENABLED;
4069 dev_info(&pf->pdev->dev, "AQ Querying DCB configuration failed: %d\n",
4070 pf->hw.aq.asq_last_status);
4076 #endif /* CONFIG_I40E_DCB */
4079 * i40e_up_complete - Finish the last steps of bringing up a connection
4080 * @vsi: the VSI being configured
4082 static int i40e_up_complete(struct i40e_vsi *vsi)
4084 struct i40e_pf *pf = vsi->back;
4087 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
4088 i40e_vsi_configure_msix(vsi);
4090 i40e_configure_msi_and_legacy(vsi);
4093 err = i40e_vsi_control_rings(vsi, true);
4097 clear_bit(__I40E_DOWN, &vsi->state);
4098 i40e_napi_enable_all(vsi);
4099 i40e_vsi_enable_irq(vsi);
4101 if ((pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP) &&
4103 netdev_info(vsi->netdev, "NIC Link is Up\n");
4104 netif_tx_start_all_queues(vsi->netdev);
4105 netif_carrier_on(vsi->netdev);
4106 } else if (vsi->netdev) {
4107 netdev_info(vsi->netdev, "NIC Link is Down\n");
4110 /* replay FDIR SB filters */
4111 if (vsi->type == I40E_VSI_FDIR)
4112 i40e_fdir_filter_restore(vsi);
4113 i40e_service_event_schedule(pf);
4119 * i40e_vsi_reinit_locked - Reset the VSI
4120 * @vsi: the VSI being configured
4122 * Rebuild the ring structs after some configuration
4123 * has changed, e.g. MTU size.
4125 static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi)
4127 struct i40e_pf *pf = vsi->back;
4129 WARN_ON(in_interrupt());
4130 while (test_and_set_bit(__I40E_CONFIG_BUSY, &pf->state))
4131 usleep_range(1000, 2000);
4134 /* Give a VF some time to respond to the reset. The
4135 * two second wait is based upon the watchdog cycle in
4138 if (vsi->type == I40E_VSI_SRIOV)
4141 clear_bit(__I40E_CONFIG_BUSY, &pf->state);
4145 * i40e_up - Bring the connection back up after being down
4146 * @vsi: the VSI being configured
4148 int i40e_up(struct i40e_vsi *vsi)
4152 err = i40e_vsi_configure(vsi);
4154 err = i40e_up_complete(vsi);
4160 * i40e_down - Shutdown the connection processing
4161 * @vsi: the VSI being stopped
4163 void i40e_down(struct i40e_vsi *vsi)
4167 /* It is assumed that the caller of this function
4168 * sets the vsi->state __I40E_DOWN bit.
4171 netif_carrier_off(vsi->netdev);
4172 netif_tx_disable(vsi->netdev);
4174 i40e_vsi_disable_irq(vsi);
4175 i40e_vsi_control_rings(vsi, false);
4176 i40e_napi_disable_all(vsi);
4178 for (i = 0; i < vsi->num_queue_pairs; i++) {
4179 i40e_clean_tx_ring(vsi->tx_rings[i]);
4180 i40e_clean_rx_ring(vsi->rx_rings[i]);
4185 * i40e_setup_tc - configure multiple traffic classes
4186 * @netdev: net device to configure
4187 * @tc: number of traffic classes to enable
4189 static int i40e_setup_tc(struct net_device *netdev, u8 tc)
4191 struct i40e_netdev_priv *np = netdev_priv(netdev);
4192 struct i40e_vsi *vsi = np->vsi;
4193 struct i40e_pf *pf = vsi->back;
4198 /* Check if DCB enabled to continue */
4199 if (!(pf->flags & I40E_FLAG_DCB_ENABLED)) {
4200 netdev_info(netdev, "DCB is not enabled for adapter\n");
4204 /* Check if MFP enabled */
4205 if (pf->flags & I40E_FLAG_MFP_ENABLED) {
4206 netdev_info(netdev, "Configuring TC not supported in MFP mode\n");
4210 /* Check whether tc count is within enabled limit */
4211 if (tc > i40e_pf_get_num_tc(pf)) {
4212 netdev_info(netdev, "TC count greater than enabled on link for adapter\n");
4216 /* Generate TC map for number of tc requested */
4217 for (i = 0; i < tc; i++)
4218 enabled_tc |= (1 << i);
4220 /* Requesting same TC configuration as already enabled */
4221 if (enabled_tc == vsi->tc_config.enabled_tc)
4224 /* Quiesce VSI queues */
4225 i40e_quiesce_vsi(vsi);
4227 /* Configure VSI for enabled TCs */
4228 ret = i40e_vsi_config_tc(vsi, enabled_tc);
4230 netdev_info(netdev, "Failed configuring TC for VSI seid=%d\n",
4236 i40e_unquiesce_vsi(vsi);
4243 * i40e_open - Called when a network interface is made active
4244 * @netdev: network interface device structure
4246 * The open entry point is called when a network interface is made
4247 * active by the system (IFF_UP). At this point all resources needed
4248 * for transmit and receive operations are allocated, the interrupt
4249 * handler is registered with the OS, the netdev watchdog subtask is
4250 * enabled, and the stack is notified that the interface is ready.
4252 * Returns 0 on success, negative value on failure
4254 static int i40e_open(struct net_device *netdev)
4256 struct i40e_netdev_priv *np = netdev_priv(netdev);
4257 struct i40e_vsi *vsi = np->vsi;
4258 struct i40e_pf *pf = vsi->back;
4261 /* disallow open during test or if eeprom is broken */
4262 if (test_bit(__I40E_TESTING, &pf->state) ||
4263 test_bit(__I40E_BAD_EEPROM, &pf->state))
4266 netif_carrier_off(netdev);
4268 err = i40e_vsi_open(vsi);
4272 /* configure global TSO hardware offload settings */
4273 wr32(&pf->hw, I40E_GLLAN_TSOMSK_F, be32_to_cpu(TCP_FLAG_PSH |
4274 TCP_FLAG_FIN) >> 16);
4275 wr32(&pf->hw, I40E_GLLAN_TSOMSK_M, be32_to_cpu(TCP_FLAG_PSH |
4277 TCP_FLAG_CWR) >> 16);
4278 wr32(&pf->hw, I40E_GLLAN_TSOMSK_L, be32_to_cpu(TCP_FLAG_CWR) >> 16);
4280 #ifdef CONFIG_I40E_VXLAN
4281 vxlan_get_rx_port(netdev);
4289 * @vsi: the VSI to open
4291 * Finish initialization of the VSI.
4293 * Returns 0 on success, negative value on failure
4295 int i40e_vsi_open(struct i40e_vsi *vsi)
4297 struct i40e_pf *pf = vsi->back;
4298 char int_name[IFNAMSIZ];
4301 /* allocate descriptors */
4302 err = i40e_vsi_setup_tx_resources(vsi);
4305 err = i40e_vsi_setup_rx_resources(vsi);
4309 err = i40e_vsi_configure(vsi);
4314 snprintf(int_name, sizeof(int_name) - 1, "%s-%s",
4315 dev_driver_string(&pf->pdev->dev), vsi->netdev->name);
4316 err = i40e_vsi_request_irq(vsi, int_name);
4320 /* Notify the stack of the actual queue counts. */
4321 err = netif_set_real_num_tx_queues(vsi->netdev,
4322 vsi->num_queue_pairs);
4324 goto err_set_queues;
4326 err = netif_set_real_num_rx_queues(vsi->netdev,
4327 vsi->num_queue_pairs);
4329 goto err_set_queues;
4331 } else if (vsi->type == I40E_VSI_FDIR) {
4332 snprintf(int_name, sizeof(int_name) - 1, "%s-fdir",
4333 dev_driver_string(&pf->pdev->dev));
4334 err = i40e_vsi_request_irq(vsi, int_name);
4340 err = i40e_up_complete(vsi);
4342 goto err_up_complete;
4349 i40e_vsi_free_irq(vsi);
4351 i40e_vsi_free_rx_resources(vsi);
4353 i40e_vsi_free_tx_resources(vsi);
4354 if (vsi == pf->vsi[pf->lan_vsi])
4355 i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
4361 * i40e_fdir_filter_exit - Cleans up the Flow Director accounting
4362 * @pf: Pointer to pf
4364 * This function destroys the hlist where all the Flow Director
4365 * filters were saved.
4367 static void i40e_fdir_filter_exit(struct i40e_pf *pf)
4369 struct i40e_fdir_filter *filter;
4370 struct hlist_node *node2;
4372 hlist_for_each_entry_safe(filter, node2,
4373 &pf->fdir_filter_list, fdir_node) {
4374 hlist_del(&filter->fdir_node);
4377 pf->fdir_pf_active_filters = 0;
4381 * i40e_close - Disables a network interface
4382 * @netdev: network interface device structure
4384 * The close entry point is called when an interface is de-activated
4385 * by the OS. The hardware is still under the driver's control, but
4386 * this netdev interface is disabled.
4388 * Returns 0, this is not allowed to fail
4390 static int i40e_close(struct net_device *netdev)
4392 struct i40e_netdev_priv *np = netdev_priv(netdev);
4393 struct i40e_vsi *vsi = np->vsi;
4395 i40e_vsi_close(vsi);
4401 * i40e_do_reset - Start a PF or Core Reset sequence
4402 * @pf: board private structure
4403 * @reset_flags: which reset is requested
4405 * The essential difference in resets is that the PF Reset
4406 * doesn't clear the packet buffers, doesn't reset the PE
4407 * firmware, and doesn't bother the other PFs on the chip.
4409 void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags)
4413 WARN_ON(in_interrupt());
4415 /* do the biggest reset indicated */
4416 if (reset_flags & (1 << __I40E_GLOBAL_RESET_REQUESTED)) {
4418 /* Request a Global Reset
4420 * This will start the chip's countdown to the actual full
4421 * chip reset event, and a warning interrupt to be sent
4422 * to all PFs, including the requestor. Our handler
4423 * for the warning interrupt will deal with the shutdown
4424 * and recovery of the switch setup.
4426 dev_dbg(&pf->pdev->dev, "GlobalR requested\n");
4427 val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
4428 val |= I40E_GLGEN_RTRIG_GLOBR_MASK;
4429 wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
4431 } else if (reset_flags & (1 << __I40E_CORE_RESET_REQUESTED)) {
4433 /* Request a Core Reset
4435 * Same as Global Reset, except does *not* include the MAC/PHY
4437 dev_dbg(&pf->pdev->dev, "CoreR requested\n");
4438 val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
4439 val |= I40E_GLGEN_RTRIG_CORER_MASK;
4440 wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
4441 i40e_flush(&pf->hw);
4443 } else if (reset_flags & (1 << __I40E_EMP_RESET_REQUESTED)) {
4445 /* Request a Firmware Reset
4447 * Same as Global reset, plus restarting the
4448 * embedded firmware engine.
4450 /* enable EMP Reset */
4451 val = rd32(&pf->hw, I40E_GLGEN_RSTENA_EMP);
4452 val |= I40E_GLGEN_RSTENA_EMP_EMP_RST_ENA_MASK;
4453 wr32(&pf->hw, I40E_GLGEN_RSTENA_EMP, val);
4455 /* force the reset */
4456 val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
4457 val |= I40E_GLGEN_RTRIG_EMPFWR_MASK;
4458 wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
4459 i40e_flush(&pf->hw);
4461 } else if (reset_flags & (1 << __I40E_PF_RESET_REQUESTED)) {
4463 /* Request a PF Reset
4465 * Resets only the PF-specific registers
4467 * This goes directly to the tear-down and rebuild of
4468 * the switch, since we need to do all the recovery as
4469 * for the Core Reset.
4471 dev_dbg(&pf->pdev->dev, "PFR requested\n");
4472 i40e_handle_reset_warning(pf);
4474 } else if (reset_flags & (1 << __I40E_REINIT_REQUESTED)) {
4477 /* Find the VSI(s) that requested a re-init */
4478 dev_info(&pf->pdev->dev,
4479 "VSI reinit requested\n");
4480 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
4481 struct i40e_vsi *vsi = pf->vsi[v];
4483 test_bit(__I40E_REINIT_REQUESTED, &vsi->state)) {
4484 i40e_vsi_reinit_locked(pf->vsi[v]);
4485 clear_bit(__I40E_REINIT_REQUESTED, &vsi->state);
4489 /* no further action needed, so return now */
4492 dev_info(&pf->pdev->dev,
4493 "bad reset request 0x%08x\n", reset_flags);
4498 #ifdef CONFIG_I40E_DCB
4500 * i40e_dcb_need_reconfig - Check if DCB needs reconfig
4501 * @pf: board private structure
4502 * @old_cfg: current DCB config
4503 * @new_cfg: new DCB config
4505 bool i40e_dcb_need_reconfig(struct i40e_pf *pf,
4506 struct i40e_dcbx_config *old_cfg,
4507 struct i40e_dcbx_config *new_cfg)
4509 bool need_reconfig = false;
4511 /* Check if ETS configuration has changed */
4512 if (memcmp(&new_cfg->etscfg,
4514 sizeof(new_cfg->etscfg))) {
4515 /* If Priority Table has changed reconfig is needed */
4516 if (memcmp(&new_cfg->etscfg.prioritytable,
4517 &old_cfg->etscfg.prioritytable,
4518 sizeof(new_cfg->etscfg.prioritytable))) {
4519 need_reconfig = true;
4520 dev_dbg(&pf->pdev->dev, "ETS UP2TC changed.\n");
4523 if (memcmp(&new_cfg->etscfg.tcbwtable,
4524 &old_cfg->etscfg.tcbwtable,
4525 sizeof(new_cfg->etscfg.tcbwtable)))
4526 dev_dbg(&pf->pdev->dev, "ETS TC BW Table changed.\n");
4528 if (memcmp(&new_cfg->etscfg.tsatable,
4529 &old_cfg->etscfg.tsatable,
4530 sizeof(new_cfg->etscfg.tsatable)))
4531 dev_dbg(&pf->pdev->dev, "ETS TSA Table changed.\n");
4534 /* Check if PFC configuration has changed */
4535 if (memcmp(&new_cfg->pfc,
4537 sizeof(new_cfg->pfc))) {
4538 need_reconfig = true;
4539 dev_dbg(&pf->pdev->dev, "PFC config change detected.\n");
4542 /* Check if APP Table has changed */
4543 if (memcmp(&new_cfg->app,
4545 sizeof(new_cfg->app))) {
4546 need_reconfig = true;
4547 dev_dbg(&pf->pdev->dev, "APP Table change detected.\n");
4550 return need_reconfig;
4554 * i40e_handle_lldp_event - Handle LLDP Change MIB event
4555 * @pf: board private structure
4556 * @e: event info posted on ARQ
4558 static int i40e_handle_lldp_event(struct i40e_pf *pf,
4559 struct i40e_arq_event_info *e)
4561 struct i40e_aqc_lldp_get_mib *mib =
4562 (struct i40e_aqc_lldp_get_mib *)&e->desc.params.raw;
4563 struct i40e_hw *hw = &pf->hw;
4564 struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
4565 struct i40e_dcbx_config tmp_dcbx_cfg;
4566 bool need_reconfig = false;
4570 /* Ignore if event is not for Nearest Bridge */
4571 type = ((mib->type >> I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT)
4572 & I40E_AQ_LLDP_BRIDGE_TYPE_MASK);
4573 if (type != I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE)
4576 /* Check MIB Type and return if event for Remote MIB update */
4577 type = mib->type & I40E_AQ_LLDP_MIB_TYPE_MASK;
4578 if (type == I40E_AQ_LLDP_MIB_REMOTE) {
4579 /* Update the remote cached instance and return */
4580 ret = i40e_aq_get_dcb_config(hw, I40E_AQ_LLDP_MIB_REMOTE,
4581 I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE,
4582 &hw->remote_dcbx_config);
4586 /* Convert/store the DCBX data from LLDPDU temporarily */
4587 memset(&tmp_dcbx_cfg, 0, sizeof(tmp_dcbx_cfg));
4588 ret = i40e_lldp_to_dcb_config(e->msg_buf, &tmp_dcbx_cfg);
4590 /* Error in LLDPDU parsing return */
4591 dev_info(&pf->pdev->dev, "Failed parsing LLDPDU from event buffer\n");
4595 /* No change detected in DCBX configs */
4596 if (!memcmp(&tmp_dcbx_cfg, dcbx_cfg, sizeof(tmp_dcbx_cfg))) {
4597 dev_dbg(&pf->pdev->dev, "No change detected in DCBX configuration.\n");
4601 need_reconfig = i40e_dcb_need_reconfig(pf, dcbx_cfg, &tmp_dcbx_cfg);
4603 i40e_dcbnl_flush_apps(pf, &tmp_dcbx_cfg);
4605 /* Overwrite the new configuration */
4606 *dcbx_cfg = tmp_dcbx_cfg;
4611 /* Reconfiguration needed quiesce all VSIs */
4612 i40e_pf_quiesce_all_vsi(pf);
4614 /* Changes in configuration update VEB/VSI */
4615 i40e_dcb_reconfigure(pf);
4617 i40e_pf_unquiesce_all_vsi(pf);
4621 #endif /* CONFIG_I40E_DCB */
4624 * i40e_do_reset_safe - Protected reset path for userland calls.
4625 * @pf: board private structure
4626 * @reset_flags: which reset is requested
4629 void i40e_do_reset_safe(struct i40e_pf *pf, u32 reset_flags)
4632 i40e_do_reset(pf, reset_flags);
4637 * i40e_handle_lan_overflow_event - Handler for LAN queue overflow event
4638 * @pf: board private structure
4639 * @e: event info posted on ARQ
4641 * Handler for LAN Queue Overflow Event generated by the firmware for PF
4644 static void i40e_handle_lan_overflow_event(struct i40e_pf *pf,
4645 struct i40e_arq_event_info *e)
4647 struct i40e_aqc_lan_overflow *data =
4648 (struct i40e_aqc_lan_overflow *)&e->desc.params.raw;
4649 u32 queue = le32_to_cpu(data->prtdcb_rupto);
4650 u32 qtx_ctl = le32_to_cpu(data->otx_ctl);
4651 struct i40e_hw *hw = &pf->hw;
4655 dev_dbg(&pf->pdev->dev, "overflow Rx Queue Number = %d QTX_CTL=0x%08x\n",
4658 /* Queue belongs to VF, find the VF and issue VF reset */
4659 if (((qtx_ctl & I40E_QTX_CTL_PFVF_Q_MASK)
4660 >> I40E_QTX_CTL_PFVF_Q_SHIFT) == I40E_QTX_CTL_VF_QUEUE) {
4661 vf_id = (u16)((qtx_ctl & I40E_QTX_CTL_VFVM_INDX_MASK)
4662 >> I40E_QTX_CTL_VFVM_INDX_SHIFT);
4663 vf_id -= hw->func_caps.vf_base_id;
4664 vf = &pf->vf[vf_id];
4665 i40e_vc_notify_vf_reset(vf);
4666 /* Allow VF to process pending reset notification */
4668 i40e_reset_vf(vf, false);
4673 * i40e_service_event_complete - Finish up the service event
4674 * @pf: board private structure
4676 static void i40e_service_event_complete(struct i40e_pf *pf)
4678 BUG_ON(!test_bit(__I40E_SERVICE_SCHED, &pf->state));
4680 /* flush memory to make sure state is correct before next watchog */
4681 smp_mb__before_atomic();
4682 clear_bit(__I40E_SERVICE_SCHED, &pf->state);
4686 * i40e_get_current_fd_count - Get the count of FD filters programmed in the HW
4687 * @pf: board private structure
4689 int i40e_get_current_fd_count(struct i40e_pf *pf)
4692 val = rd32(&pf->hw, I40E_PFQF_FDSTAT);
4693 fcnt_prog = (val & I40E_PFQF_FDSTAT_GUARANT_CNT_MASK) +
4694 ((val & I40E_PFQF_FDSTAT_BEST_CNT_MASK) >>
4695 I40E_PFQF_FDSTAT_BEST_CNT_SHIFT);
4700 * i40e_fdir_check_and_reenable - Function to reenabe FD ATR or SB if disabled
4701 * @pf: board private structure
4703 void i40e_fdir_check_and_reenable(struct i40e_pf *pf)
4705 u32 fcnt_prog, fcnt_avail;
4707 /* Check if, FD SB or ATR was auto disabled and if there is enough room
4710 if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
4711 (pf->flags & I40E_FLAG_FD_SB_ENABLED))
4713 fcnt_prog = i40e_get_current_fd_count(pf);
4714 fcnt_avail = pf->hw.fdir_shared_filter_count +
4715 pf->fdir_pf_filter_count;
4716 if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM)) {
4717 if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
4718 (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)) {
4719 pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
4720 dev_info(&pf->pdev->dev, "FD Sideband/ntuple is being enabled since we have space in the table now\n");
4723 /* Wait for some more space to be available to turn on ATR */
4724 if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM * 2)) {
4725 if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
4726 (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED)) {
4727 pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
4728 dev_info(&pf->pdev->dev, "ATR is being enabled since we have space in the table now\n");
4734 * i40e_fdir_reinit_subtask - Worker thread to reinit FDIR filter table
4735 * @pf: board private structure
4737 static void i40e_fdir_reinit_subtask(struct i40e_pf *pf)
4739 if (!(pf->flags & I40E_FLAG_FDIR_REQUIRES_REINIT))
4742 /* if interface is down do nothing */
4743 if (test_bit(__I40E_DOWN, &pf->state))
4745 i40e_fdir_check_and_reenable(pf);
4747 if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
4748 (pf->flags & I40E_FLAG_FD_SB_ENABLED))
4749 pf->flags &= ~I40E_FLAG_FDIR_REQUIRES_REINIT;
4753 * i40e_vsi_link_event - notify VSI of a link event
4754 * @vsi: vsi to be notified
4755 * @link_up: link up or down
4757 static void i40e_vsi_link_event(struct i40e_vsi *vsi, bool link_up)
4762 switch (vsi->type) {
4764 if (!vsi->netdev || !vsi->netdev_registered)
4768 netif_carrier_on(vsi->netdev);
4769 netif_tx_wake_all_queues(vsi->netdev);
4771 netif_carrier_off(vsi->netdev);
4772 netif_tx_stop_all_queues(vsi->netdev);
4776 case I40E_VSI_SRIOV:
4779 case I40E_VSI_VMDQ2:
4781 case I40E_VSI_MIRROR:
4783 /* there is no notification for other VSIs */
4789 * i40e_veb_link_event - notify elements on the veb of a link event
4790 * @veb: veb to be notified
4791 * @link_up: link up or down
4793 static void i40e_veb_link_event(struct i40e_veb *veb, bool link_up)
4798 if (!veb || !veb->pf)
4802 /* depth first... */
4803 for (i = 0; i < I40E_MAX_VEB; i++)
4804 if (pf->veb[i] && (pf->veb[i]->uplink_seid == veb->seid))
4805 i40e_veb_link_event(pf->veb[i], link_up);
4807 /* ... now the local VSIs */
4808 for (i = 0; i < pf->hw.func_caps.num_vsis; i++)
4809 if (pf->vsi[i] && (pf->vsi[i]->uplink_seid == veb->seid))
4810 i40e_vsi_link_event(pf->vsi[i], link_up);
4814 * i40e_link_event - Update netif_carrier status
4815 * @pf: board private structure
4817 static void i40e_link_event(struct i40e_pf *pf)
4819 bool new_link, old_link;
4821 new_link = (pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP);
4822 old_link = (pf->hw.phy.link_info_old.link_info & I40E_AQ_LINK_UP);
4824 if (new_link == old_link)
4827 if (!test_bit(__I40E_DOWN, &pf->vsi[pf->lan_vsi]->state))
4828 netdev_info(pf->vsi[pf->lan_vsi]->netdev,
4829 "NIC Link is %s\n", (new_link ? "Up" : "Down"));
4831 /* Notify the base of the switch tree connected to
4832 * the link. Floating VEBs are not notified.
4834 if (pf->lan_veb != I40E_NO_VEB && pf->veb[pf->lan_veb])
4835 i40e_veb_link_event(pf->veb[pf->lan_veb], new_link);
4837 i40e_vsi_link_event(pf->vsi[pf->lan_vsi], new_link);
4840 i40e_vc_notify_link_state(pf);
4842 if (pf->flags & I40E_FLAG_PTP)
4843 i40e_ptp_set_increment(pf);
4847 * i40e_check_hang_subtask - Check for hung queues and dropped interrupts
4848 * @pf: board private structure
4850 * Set the per-queue flags to request a check for stuck queues in the irq
4851 * clean functions, then force interrupts to be sure the irq clean is called.
4853 static void i40e_check_hang_subtask(struct i40e_pf *pf)
4857 /* If we're down or resetting, just bail */
4858 if (test_bit(__I40E_CONFIG_BUSY, &pf->state))
4861 /* for each VSI/netdev
4863 * set the check flag
4865 * force an interrupt
4867 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
4868 struct i40e_vsi *vsi = pf->vsi[v];
4872 test_bit(__I40E_DOWN, &vsi->state) ||
4873 (vsi->netdev && !netif_carrier_ok(vsi->netdev)))
4876 for (i = 0; i < vsi->num_queue_pairs; i++) {
4877 set_check_for_tx_hang(vsi->tx_rings[i]);
4878 if (test_bit(__I40E_HANG_CHECK_ARMED,
4879 &vsi->tx_rings[i]->state))
4884 if (!(pf->flags & I40E_FLAG_MSIX_ENABLED)) {
4885 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0,
4886 (I40E_PFINT_DYN_CTL0_INTENA_MASK |
4887 I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK));
4889 u16 vec = vsi->base_vector - 1;
4890 u32 val = (I40E_PFINT_DYN_CTLN_INTENA_MASK |
4891 I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK);
4892 for (i = 0; i < vsi->num_q_vectors; i++, vec++)
4893 wr32(&vsi->back->hw,
4894 I40E_PFINT_DYN_CTLN(vec), val);
4896 i40e_flush(&vsi->back->hw);
4902 * i40e_watchdog_subtask - Check and bring link up
4903 * @pf: board private structure
4905 static void i40e_watchdog_subtask(struct i40e_pf *pf)
4909 /* if interface is down do nothing */
4910 if (test_bit(__I40E_DOWN, &pf->state) ||
4911 test_bit(__I40E_CONFIG_BUSY, &pf->state))
4914 /* Update the stats for active netdevs so the network stack
4915 * can look at updated numbers whenever it cares to
4917 for (i = 0; i < pf->hw.func_caps.num_vsis; i++)
4918 if (pf->vsi[i] && pf->vsi[i]->netdev)
4919 i40e_update_stats(pf->vsi[i]);
4921 /* Update the stats for the active switching components */
4922 for (i = 0; i < I40E_MAX_VEB; i++)
4924 i40e_update_veb_stats(pf->veb[i]);
4926 i40e_ptp_rx_hang(pf->vsi[pf->lan_vsi]);
4930 * i40e_reset_subtask - Set up for resetting the device and driver
4931 * @pf: board private structure
4933 static void i40e_reset_subtask(struct i40e_pf *pf)
4935 u32 reset_flags = 0;
4938 if (test_bit(__I40E_REINIT_REQUESTED, &pf->state)) {
4939 reset_flags |= (1 << __I40E_REINIT_REQUESTED);
4940 clear_bit(__I40E_REINIT_REQUESTED, &pf->state);
4942 if (test_bit(__I40E_PF_RESET_REQUESTED, &pf->state)) {
4943 reset_flags |= (1 << __I40E_PF_RESET_REQUESTED);
4944 clear_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
4946 if (test_bit(__I40E_CORE_RESET_REQUESTED, &pf->state)) {
4947 reset_flags |= (1 << __I40E_CORE_RESET_REQUESTED);
4948 clear_bit(__I40E_CORE_RESET_REQUESTED, &pf->state);
4950 if (test_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state)) {
4951 reset_flags |= (1 << __I40E_GLOBAL_RESET_REQUESTED);
4952 clear_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state);
4955 /* If there's a recovery already waiting, it takes
4956 * precedence before starting a new reset sequence.
4958 if (test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state)) {
4959 i40e_handle_reset_warning(pf);
4963 /* If we're already down or resetting, just bail */
4965 !test_bit(__I40E_DOWN, &pf->state) &&
4966 !test_bit(__I40E_CONFIG_BUSY, &pf->state))
4967 i40e_do_reset(pf, reset_flags);
4974 * i40e_handle_link_event - Handle link event
4975 * @pf: board private structure
4976 * @e: event info posted on ARQ
4978 static void i40e_handle_link_event(struct i40e_pf *pf,
4979 struct i40e_arq_event_info *e)
4981 struct i40e_hw *hw = &pf->hw;
4982 struct i40e_aqc_get_link_status *status =
4983 (struct i40e_aqc_get_link_status *)&e->desc.params.raw;
4984 struct i40e_link_status *hw_link_info = &hw->phy.link_info;
4986 /* save off old link status information */
4987 memcpy(&pf->hw.phy.link_info_old, hw_link_info,
4988 sizeof(pf->hw.phy.link_info_old));
4990 /* update link status */
4991 hw_link_info->phy_type = (enum i40e_aq_phy_type)status->phy_type;
4992 hw_link_info->link_speed = (enum i40e_aq_link_speed)status->link_speed;
4993 hw_link_info->link_info = status->link_info;
4994 hw_link_info->an_info = status->an_info;
4995 hw_link_info->ext_info = status->ext_info;
4996 hw_link_info->lse_enable =
4997 le16_to_cpu(status->command_flags) &
5000 /* process the event */
5001 i40e_link_event(pf);
5003 /* Do a new status request to re-enable LSE reporting
5004 * and load new status information into the hw struct,
5005 * then see if the status changed while processing the
5008 i40e_aq_get_link_info(&pf->hw, true, NULL, NULL);
5009 i40e_link_event(pf);
5013 * i40e_clean_adminq_subtask - Clean the AdminQ rings
5014 * @pf: board private structure
5016 static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
5018 struct i40e_arq_event_info event;
5019 struct i40e_hw *hw = &pf->hw;
5025 if (!test_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state))
5028 event.msg_size = I40E_MAX_AQ_BUF_SIZE;
5029 event.msg_buf = kzalloc(event.msg_size, GFP_KERNEL);
5034 event.msg_size = I40E_MAX_AQ_BUF_SIZE; /* reinit each time */
5035 ret = i40e_clean_arq_element(hw, &event, &pending);
5036 if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK) {
5037 dev_info(&pf->pdev->dev, "No ARQ event found\n");
5040 dev_info(&pf->pdev->dev, "ARQ event error %d\n", ret);
5044 opcode = le16_to_cpu(event.desc.opcode);
5047 case i40e_aqc_opc_get_link_status:
5048 i40e_handle_link_event(pf, &event);
5050 case i40e_aqc_opc_send_msg_to_pf:
5051 ret = i40e_vc_process_vf_msg(pf,
5052 le16_to_cpu(event.desc.retval),
5053 le32_to_cpu(event.desc.cookie_high),
5054 le32_to_cpu(event.desc.cookie_low),
5058 case i40e_aqc_opc_lldp_update_mib:
5059 dev_dbg(&pf->pdev->dev, "ARQ: Update LLDP MIB event received\n");
5060 #ifdef CONFIG_I40E_DCB
5062 ret = i40e_handle_lldp_event(pf, &event);
5064 #endif /* CONFIG_I40E_DCB */
5066 case i40e_aqc_opc_event_lan_overflow:
5067 dev_dbg(&pf->pdev->dev, "ARQ LAN queue overflow event received\n");
5068 i40e_handle_lan_overflow_event(pf, &event);
5070 case i40e_aqc_opc_send_msg_to_peer:
5071 dev_info(&pf->pdev->dev, "ARQ: Msg from other pf\n");
5074 dev_info(&pf->pdev->dev,
5075 "ARQ Error: Unknown event 0x%04x received\n",
5079 } while (pending && (i++ < pf->adminq_work_limit));
5081 clear_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
5082 /* re-enable Admin queue interrupt cause */
5083 val = rd32(hw, I40E_PFINT_ICR0_ENA);
5084 val |= I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
5085 wr32(hw, I40E_PFINT_ICR0_ENA, val);
5088 kfree(event.msg_buf);
5092 * i40e_verify_eeprom - make sure eeprom is good to use
5093 * @pf: board private structure
5095 static void i40e_verify_eeprom(struct i40e_pf *pf)
5099 err = i40e_diag_eeprom_test(&pf->hw);
5101 /* retry in case of garbage read */
5102 err = i40e_diag_eeprom_test(&pf->hw);
5104 dev_info(&pf->pdev->dev, "eeprom check failed (%d), Tx/Rx traffic disabled\n",
5106 set_bit(__I40E_BAD_EEPROM, &pf->state);
5110 if (!err && test_bit(__I40E_BAD_EEPROM, &pf->state)) {
5111 dev_info(&pf->pdev->dev, "eeprom check passed, Tx/Rx traffic enabled\n");
5112 clear_bit(__I40E_BAD_EEPROM, &pf->state);
5117 * i40e_reconstitute_veb - rebuild the VEB and anything connected to it
5118 * @veb: pointer to the VEB instance
5120 * This is a recursive function that first builds the attached VSIs then
5121 * recurses in to build the next layer of VEB. We track the connections
5122 * through our own index numbers because the seid's from the HW could
5123 * change across the reset.
5125 static int i40e_reconstitute_veb(struct i40e_veb *veb)
5127 struct i40e_vsi *ctl_vsi = NULL;
5128 struct i40e_pf *pf = veb->pf;
5132 /* build VSI that owns this VEB, temporarily attached to base VEB */
5133 for (v = 0; v < pf->hw.func_caps.num_vsis && !ctl_vsi; v++) {
5135 pf->vsi[v]->veb_idx == veb->idx &&
5136 pf->vsi[v]->flags & I40E_VSI_FLAG_VEB_OWNER) {
5137 ctl_vsi = pf->vsi[v];
5142 dev_info(&pf->pdev->dev,
5143 "missing owner VSI for veb_idx %d\n", veb->idx);
5145 goto end_reconstitute;
5147 if (ctl_vsi != pf->vsi[pf->lan_vsi])
5148 ctl_vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
5149 ret = i40e_add_vsi(ctl_vsi);
5151 dev_info(&pf->pdev->dev,
5152 "rebuild of owner VSI failed: %d\n", ret);
5153 goto end_reconstitute;
5155 i40e_vsi_reset_stats(ctl_vsi);
5157 /* create the VEB in the switch and move the VSI onto the VEB */
5158 ret = i40e_add_veb(veb, ctl_vsi);
5160 goto end_reconstitute;
5162 /* create the remaining VSIs attached to this VEB */
5163 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
5164 if (!pf->vsi[v] || pf->vsi[v] == ctl_vsi)
5167 if (pf->vsi[v]->veb_idx == veb->idx) {
5168 struct i40e_vsi *vsi = pf->vsi[v];
5169 vsi->uplink_seid = veb->seid;
5170 ret = i40e_add_vsi(vsi);
5172 dev_info(&pf->pdev->dev,
5173 "rebuild of vsi_idx %d failed: %d\n",
5175 goto end_reconstitute;
5177 i40e_vsi_reset_stats(vsi);
5181 /* create any VEBs attached to this VEB - RECURSION */
5182 for (veb_idx = 0; veb_idx < I40E_MAX_VEB; veb_idx++) {
5183 if (pf->veb[veb_idx] && pf->veb[veb_idx]->veb_idx == veb->idx) {
5184 pf->veb[veb_idx]->uplink_seid = veb->seid;
5185 ret = i40e_reconstitute_veb(pf->veb[veb_idx]);
5196 * i40e_get_capabilities - get info about the HW
5197 * @pf: the PF struct
5199 static int i40e_get_capabilities(struct i40e_pf *pf)
5201 struct i40e_aqc_list_capabilities_element_resp *cap_buf;
5206 buf_len = 40 * sizeof(struct i40e_aqc_list_capabilities_element_resp);
5208 cap_buf = kzalloc(buf_len, GFP_KERNEL);
5212 /* this loads the data into the hw struct for us */
5213 err = i40e_aq_discover_capabilities(&pf->hw, cap_buf, buf_len,
5215 i40e_aqc_opc_list_func_capabilities,
5217 /* data loaded, buffer no longer needed */
5220 if (pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOMEM) {
5221 /* retry with a larger buffer */
5222 buf_len = data_size;
5223 } else if (pf->hw.aq.asq_last_status != I40E_AQ_RC_OK) {
5224 dev_info(&pf->pdev->dev,
5225 "capability discovery failed: aq=%d\n",
5226 pf->hw.aq.asq_last_status);
5231 if (((pf->hw.aq.fw_maj_ver == 2) && (pf->hw.aq.fw_min_ver < 22)) ||
5232 (pf->hw.aq.fw_maj_ver < 2)) {
5233 pf->hw.func_caps.num_msix_vectors++;
5234 pf->hw.func_caps.num_msix_vectors_vf++;
5237 if (pf->hw.debug_mask & I40E_DEBUG_USER)
5238 dev_info(&pf->pdev->dev,
5239 "pf=%d, num_vfs=%d, msix_pf=%d, msix_vf=%d, fd_g=%d, fd_b=%d, pf_max_q=%d num_vsi=%d\n",
5240 pf->hw.pf_id, pf->hw.func_caps.num_vfs,
5241 pf->hw.func_caps.num_msix_vectors,
5242 pf->hw.func_caps.num_msix_vectors_vf,
5243 pf->hw.func_caps.fd_filters_guaranteed,
5244 pf->hw.func_caps.fd_filters_best_effort,
5245 pf->hw.func_caps.num_tx_qp,
5246 pf->hw.func_caps.num_vsis);
5248 #define DEF_NUM_VSI (1 + (pf->hw.func_caps.fcoe ? 1 : 0) \
5249 + pf->hw.func_caps.num_vfs)
5250 if (pf->hw.revision_id == 0 && (DEF_NUM_VSI > pf->hw.func_caps.num_vsis)) {
5251 dev_info(&pf->pdev->dev,
5252 "got num_vsis %d, setting num_vsis to %d\n",
5253 pf->hw.func_caps.num_vsis, DEF_NUM_VSI);
5254 pf->hw.func_caps.num_vsis = DEF_NUM_VSI;
5260 static int i40e_vsi_clear(struct i40e_vsi *vsi);
5263 * i40e_fdir_sb_setup - initialize the Flow Director resources for Sideband
5264 * @pf: board private structure
5266 static void i40e_fdir_sb_setup(struct i40e_pf *pf)
5268 struct i40e_vsi *vsi;
5271 if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
5274 /* find existing VSI and see if it needs configuring */
5276 for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
5277 if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
5283 /* create a new VSI if none exists */
5285 vsi = i40e_vsi_setup(pf, I40E_VSI_FDIR,
5286 pf->vsi[pf->lan_vsi]->seid, 0);
5288 dev_info(&pf->pdev->dev, "Couldn't create FDir VSI\n");
5289 pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
5294 i40e_vsi_setup_irqhandler(vsi, i40e_fdir_clean_ring);
5298 * i40e_fdir_teardown - release the Flow Director resources
5299 * @pf: board private structure
5301 static void i40e_fdir_teardown(struct i40e_pf *pf)
5305 i40e_fdir_filter_exit(pf);
5306 for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
5307 if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
5308 i40e_vsi_release(pf->vsi[i]);
5315 * i40e_prep_for_reset - prep for the core to reset
5316 * @pf: board private structure
5318 * Close up the VFs and other things in prep for pf Reset.
5320 static int i40e_prep_for_reset(struct i40e_pf *pf)
5322 struct i40e_hw *hw = &pf->hw;
5326 clear_bit(__I40E_RESET_INTR_RECEIVED, &pf->state);
5327 if (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
5330 dev_dbg(&pf->pdev->dev, "Tearing down internal switch for reset\n");
5332 if (i40e_check_asq_alive(hw))
5333 i40e_vc_notify_reset(pf);
5335 /* quiesce the VSIs and their queues that are not already DOWN */
5336 i40e_pf_quiesce_all_vsi(pf);
5338 for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
5340 pf->vsi[v]->seid = 0;
5343 i40e_shutdown_adminq(&pf->hw);
5345 /* call shutdown HMC */
5346 ret = i40e_shutdown_lan_hmc(hw);
5348 dev_info(&pf->pdev->dev, "shutdown_lan_hmc failed: %d\n", ret);
5349 clear_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state);
5355 * i40e_reset_and_rebuild - reset and rebuild using a saved config
5356 * @pf: board private structure
5357 * @reinit: if the Main VSI needs to re-initialized.
5359 static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
5361 struct i40e_driver_version dv;
5362 struct i40e_hw *hw = &pf->hw;
5366 /* Now we wait for GRST to settle out.
5367 * We don't have to delete the VEBs or VSIs from the hw switch
5368 * because the reset will make them disappear.
5370 ret = i40e_pf_reset(hw);
5372 dev_info(&pf->pdev->dev, "PF reset failed, %d\n", ret);
5375 if (test_bit(__I40E_DOWN, &pf->state))
5376 goto end_core_reset;
5377 dev_dbg(&pf->pdev->dev, "Rebuilding internal switch\n");
5379 /* rebuild the basics for the AdminQ, HMC, and initial HW switch */
5380 ret = i40e_init_adminq(&pf->hw);
5382 dev_info(&pf->pdev->dev, "Rebuild AdminQ failed, %d\n", ret);
5383 goto end_core_reset;
5386 /* re-verify the eeprom if we just had an EMP reset */
5387 if (test_bit(__I40E_EMP_RESET_REQUESTED, &pf->state)) {
5388 clear_bit(__I40E_EMP_RESET_REQUESTED, &pf->state);
5389 i40e_verify_eeprom(pf);
5392 ret = i40e_get_capabilities(pf);
5394 dev_info(&pf->pdev->dev, "i40e_get_capabilities failed, %d\n",
5396 goto end_core_reset;
5399 ret = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
5400 hw->func_caps.num_rx_qp,
5401 pf->fcoe_hmc_cntx_num, pf->fcoe_hmc_filt_num);
5403 dev_info(&pf->pdev->dev, "init_lan_hmc failed: %d\n", ret);
5404 goto end_core_reset;
5406 ret = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
5408 dev_info(&pf->pdev->dev, "configure_lan_hmc failed: %d\n", ret);
5409 goto end_core_reset;
5412 #ifdef CONFIG_I40E_DCB
5413 ret = i40e_init_pf_dcb(pf);
5415 dev_info(&pf->pdev->dev, "init_pf_dcb failed: %d\n", ret);
5416 goto end_core_reset;
5418 #endif /* CONFIG_I40E_DCB */
5420 /* do basic switch setup */
5421 ret = i40e_setup_pf_switch(pf, reinit);
5423 goto end_core_reset;
5425 /* Rebuild the VSIs and VEBs that existed before reset.
5426 * They are still in our local switch element arrays, so only
5427 * need to rebuild the switch model in the HW.
5429 * If there were VEBs but the reconstitution failed, we'll try
5430 * try to recover minimal use by getting the basic PF VSI working.
5432 if (pf->vsi[pf->lan_vsi]->uplink_seid != pf->mac_seid) {
5433 dev_dbg(&pf->pdev->dev, "attempting to rebuild switch\n");
5434 /* find the one VEB connected to the MAC, and find orphans */
5435 for (v = 0; v < I40E_MAX_VEB; v++) {
5439 if (pf->veb[v]->uplink_seid == pf->mac_seid ||
5440 pf->veb[v]->uplink_seid == 0) {
5441 ret = i40e_reconstitute_veb(pf->veb[v]);
5446 /* If Main VEB failed, we're in deep doodoo,
5447 * so give up rebuilding the switch and set up
5448 * for minimal rebuild of PF VSI.
5449 * If orphan failed, we'll report the error
5450 * but try to keep going.
5452 if (pf->veb[v]->uplink_seid == pf->mac_seid) {
5453 dev_info(&pf->pdev->dev,
5454 "rebuild of switch failed: %d, will try to set up simple PF connection\n",
5456 pf->vsi[pf->lan_vsi]->uplink_seid
5459 } else if (pf->veb[v]->uplink_seid == 0) {
5460 dev_info(&pf->pdev->dev,
5461 "rebuild of orphan VEB failed: %d\n",
5468 if (pf->vsi[pf->lan_vsi]->uplink_seid == pf->mac_seid) {
5469 dev_info(&pf->pdev->dev, "attempting to rebuild PF VSI\n");
5470 /* no VEB, so rebuild only the Main VSI */
5471 ret = i40e_add_vsi(pf->vsi[pf->lan_vsi]);
5473 dev_info(&pf->pdev->dev,
5474 "rebuild of Main VSI failed: %d\n", ret);
5475 goto end_core_reset;
5479 /* reinit the misc interrupt */
5480 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
5481 ret = i40e_setup_misc_vector(pf);
5483 /* restart the VSIs that were rebuilt and running before the reset */
5484 i40e_pf_unquiesce_all_vsi(pf);
5486 if (pf->num_alloc_vfs) {
5487 for (v = 0; v < pf->num_alloc_vfs; v++)
5488 i40e_reset_vf(&pf->vf[v], true);
5491 /* tell the firmware that we're starting */
5492 dv.major_version = DRV_VERSION_MAJOR;
5493 dv.minor_version = DRV_VERSION_MINOR;
5494 dv.build_version = DRV_VERSION_BUILD;
5495 dv.subbuild_version = 0;
5496 i40e_aq_send_driver_version(&pf->hw, &dv, NULL);
5498 dev_info(&pf->pdev->dev, "reset complete\n");
5501 clear_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state);
5505 * i40e_handle_reset_warning - prep for the pf to reset, reset and rebuild
5506 * @pf: board private structure
5508 * Close up the VFs and other things in prep for a Core Reset,
5509 * then get ready to rebuild the world.
5511 static void i40e_handle_reset_warning(struct i40e_pf *pf)
5515 ret = i40e_prep_for_reset(pf);
5517 i40e_reset_and_rebuild(pf, false);
5521 * i40e_handle_mdd_event
5522 * @pf: pointer to the pf structure
5524 * Called from the MDD irq handler to identify possibly malicious vfs
5526 static void i40e_handle_mdd_event(struct i40e_pf *pf)
5528 struct i40e_hw *hw = &pf->hw;
5529 bool mdd_detected = false;
5534 if (!test_bit(__I40E_MDD_EVENT_PENDING, &pf->state))
5537 /* find what triggered the MDD event */
5538 reg = rd32(hw, I40E_GL_MDET_TX);
5539 if (reg & I40E_GL_MDET_TX_VALID_MASK) {
5540 u8 func = (reg & I40E_GL_MDET_TX_FUNCTION_MASK)
5541 >> I40E_GL_MDET_TX_FUNCTION_SHIFT;
5542 u8 event = (reg & I40E_GL_MDET_TX_EVENT_SHIFT)
5543 >> I40E_GL_MDET_TX_EVENT_SHIFT;
5544 u8 queue = (reg & I40E_GL_MDET_TX_QUEUE_MASK)
5545 >> I40E_GL_MDET_TX_QUEUE_SHIFT;
5546 dev_info(&pf->pdev->dev,
5547 "Malicious Driver Detection event 0x%02x on TX queue %d of function 0x%02x\n",
5548 event, queue, func);
5549 wr32(hw, I40E_GL_MDET_TX, 0xffffffff);
5550 mdd_detected = true;
5552 reg = rd32(hw, I40E_GL_MDET_RX);
5553 if (reg & I40E_GL_MDET_RX_VALID_MASK) {
5554 u8 func = (reg & I40E_GL_MDET_RX_FUNCTION_MASK)
5555 >> I40E_GL_MDET_RX_FUNCTION_SHIFT;
5556 u8 event = (reg & I40E_GL_MDET_RX_EVENT_SHIFT)
5557 >> I40E_GL_MDET_RX_EVENT_SHIFT;
5558 u8 queue = (reg & I40E_GL_MDET_RX_QUEUE_MASK)
5559 >> I40E_GL_MDET_RX_QUEUE_SHIFT;
5560 dev_info(&pf->pdev->dev,
5561 "Malicious Driver Detection event 0x%02x on RX queue %d of function 0x%02x\n",
5562 event, queue, func);
5563 wr32(hw, I40E_GL_MDET_RX, 0xffffffff);
5564 mdd_detected = true;
5567 /* see if one of the VFs needs its hand slapped */
5568 for (i = 0; i < pf->num_alloc_vfs && mdd_detected; i++) {
5570 reg = rd32(hw, I40E_VP_MDET_TX(i));
5571 if (reg & I40E_VP_MDET_TX_VALID_MASK) {
5572 wr32(hw, I40E_VP_MDET_TX(i), 0xFFFF);
5573 vf->num_mdd_events++;
5574 dev_info(&pf->pdev->dev, "MDD TX event on VF %d\n", i);
5577 reg = rd32(hw, I40E_VP_MDET_RX(i));
5578 if (reg & I40E_VP_MDET_RX_VALID_MASK) {
5579 wr32(hw, I40E_VP_MDET_RX(i), 0xFFFF);
5580 vf->num_mdd_events++;
5581 dev_info(&pf->pdev->dev, "MDD RX event on VF %d\n", i);
5584 if (vf->num_mdd_events > I40E_DEFAULT_NUM_MDD_EVENTS_ALLOWED) {
5585 dev_info(&pf->pdev->dev,
5586 "Too many MDD events on VF %d, disabled\n", i);
5587 dev_info(&pf->pdev->dev,
5588 "Use PF Control I/F to re-enable the VF\n");
5589 set_bit(I40E_VF_STAT_DISABLED, &vf->vf_states);
5593 /* re-enable mdd interrupt cause */
5594 clear_bit(__I40E_MDD_EVENT_PENDING, &pf->state);
5595 reg = rd32(hw, I40E_PFINT_ICR0_ENA);
5596 reg |= I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK;
5597 wr32(hw, I40E_PFINT_ICR0_ENA, reg);
5601 #ifdef CONFIG_I40E_VXLAN
5603 * i40e_sync_vxlan_filters_subtask - Sync the VSI filter list with HW
5604 * @pf: board private structure
5606 static void i40e_sync_vxlan_filters_subtask(struct i40e_pf *pf)
5608 struct i40e_hw *hw = &pf->hw;
5614 if (!(pf->flags & I40E_FLAG_VXLAN_FILTER_SYNC))
5617 pf->flags &= ~I40E_FLAG_VXLAN_FILTER_SYNC;
5619 for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
5620 if (pf->pending_vxlan_bitmap & (1 << i)) {
5621 pf->pending_vxlan_bitmap &= ~(1 << i);
5622 port = pf->vxlan_ports[i];
5624 i40e_aq_add_udp_tunnel(hw, ntohs(port),
5625 I40E_AQC_TUNNEL_TYPE_VXLAN,
5626 &filter_index, NULL)
5627 : i40e_aq_del_udp_tunnel(hw, i, NULL);
5630 dev_info(&pf->pdev->dev, "Failed to execute AQ command for %s port %d with index %d\n",
5631 port ? "adding" : "deleting",
5632 ntohs(port), port ? i : i);
5634 pf->vxlan_ports[i] = 0;
5636 dev_info(&pf->pdev->dev, "%s port %d with AQ command with index %d\n",
5637 port ? "Added" : "Deleted",
5638 ntohs(port), port ? i : filter_index);
5646 * i40e_service_task - Run the driver's async subtasks
5647 * @work: pointer to work_struct containing our data
5649 static void i40e_service_task(struct work_struct *work)
5651 struct i40e_pf *pf = container_of(work,
5654 unsigned long start_time = jiffies;
5656 i40e_reset_subtask(pf);
5657 i40e_handle_mdd_event(pf);
5658 i40e_vc_process_vflr_event(pf);
5659 i40e_watchdog_subtask(pf);
5660 i40e_fdir_reinit_subtask(pf);
5661 i40e_check_hang_subtask(pf);
5662 i40e_sync_filters_subtask(pf);
5663 #ifdef CONFIG_I40E_VXLAN
5664 i40e_sync_vxlan_filters_subtask(pf);
5666 i40e_clean_adminq_subtask(pf);
5668 i40e_service_event_complete(pf);
5670 /* If the tasks have taken longer than one timer cycle or there
5671 * is more work to be done, reschedule the service task now
5672 * rather than wait for the timer to tick again.
5674 if (time_after(jiffies, (start_time + pf->service_timer_period)) ||
5675 test_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state) ||
5676 test_bit(__I40E_MDD_EVENT_PENDING, &pf->state) ||
5677 test_bit(__I40E_VFLR_EVENT_PENDING, &pf->state))
5678 i40e_service_event_schedule(pf);
5682 * i40e_service_timer - timer callback
5683 * @data: pointer to PF struct
5685 static void i40e_service_timer(unsigned long data)
5687 struct i40e_pf *pf = (struct i40e_pf *)data;
5689 mod_timer(&pf->service_timer,
5690 round_jiffies(jiffies + pf->service_timer_period));
5691 i40e_service_event_schedule(pf);
5695 * i40e_set_num_rings_in_vsi - Determine number of rings in the VSI
5696 * @vsi: the VSI being configured
5698 static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
5700 struct i40e_pf *pf = vsi->back;
5702 switch (vsi->type) {
5704 vsi->alloc_queue_pairs = pf->num_lan_qps;
5705 vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
5706 I40E_REQ_DESCRIPTOR_MULTIPLE);
5707 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
5708 vsi->num_q_vectors = pf->num_lan_msix;
5710 vsi->num_q_vectors = 1;
5715 vsi->alloc_queue_pairs = 1;
5716 vsi->num_desc = ALIGN(I40E_FDIR_RING_COUNT,
5717 I40E_REQ_DESCRIPTOR_MULTIPLE);
5718 vsi->num_q_vectors = 1;
5721 case I40E_VSI_VMDQ2:
5722 vsi->alloc_queue_pairs = pf->num_vmdq_qps;
5723 vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
5724 I40E_REQ_DESCRIPTOR_MULTIPLE);
5725 vsi->num_q_vectors = pf->num_vmdq_msix;
5728 case I40E_VSI_SRIOV:
5729 vsi->alloc_queue_pairs = pf->num_vf_qps;
5730 vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
5731 I40E_REQ_DESCRIPTOR_MULTIPLE);
5743 * i40e_vsi_alloc_arrays - Allocate queue and vector pointer arrays for the vsi
5744 * @type: VSI pointer
5745 * @alloc_qvectors: a bool to specify if q_vectors need to be allocated.
5747 * On error: returns error code (negative)
5748 * On success: returns 0
5750 static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi, bool alloc_qvectors)
5755 /* allocate memory for both Tx and Rx ring pointers */
5756 size = sizeof(struct i40e_ring *) * vsi->alloc_queue_pairs * 2;
5757 vsi->tx_rings = kzalloc(size, GFP_KERNEL);
5760 vsi->rx_rings = &vsi->tx_rings[vsi->alloc_queue_pairs];
5762 if (alloc_qvectors) {
5763 /* allocate memory for q_vector pointers */
5764 size = sizeof(struct i40e_q_vectors *) * vsi->num_q_vectors;
5765 vsi->q_vectors = kzalloc(size, GFP_KERNEL);
5766 if (!vsi->q_vectors) {
5774 kfree(vsi->tx_rings);
5779 * i40e_vsi_mem_alloc - Allocates the next available struct vsi in the PF
5780 * @pf: board private structure
5781 * @type: type of VSI
5783 * On error: returns error code (negative)
5784 * On success: returns vsi index in PF (positive)
5786 static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
5789 struct i40e_vsi *vsi;
5793 /* Need to protect the allocation of the VSIs at the PF level */
5794 mutex_lock(&pf->switch_mutex);
5796 /* VSI list may be fragmented if VSI creation/destruction has
5797 * been happening. We can afford to do a quick scan to look
5798 * for any free VSIs in the list.
5800 * find next empty vsi slot, looping back around if necessary
5803 while (i < pf->hw.func_caps.num_vsis && pf->vsi[i])
5805 if (i >= pf->hw.func_caps.num_vsis) {
5807 while (i < pf->next_vsi && pf->vsi[i])
5811 if (i < pf->hw.func_caps.num_vsis && !pf->vsi[i]) {
5812 vsi_idx = i; /* Found one! */
5815 goto unlock_pf; /* out of VSI slots! */
5819 vsi = kzalloc(sizeof(*vsi), GFP_KERNEL);
5826 set_bit(__I40E_DOWN, &vsi->state);
5829 vsi->rx_itr_setting = pf->rx_itr_default;
5830 vsi->tx_itr_setting = pf->tx_itr_default;
5831 vsi->netdev_registered = false;
5832 vsi->work_limit = I40E_DEFAULT_IRQ_WORK;
5833 INIT_LIST_HEAD(&vsi->mac_filter_list);
5835 ret = i40e_set_num_rings_in_vsi(vsi);
5839 ret = i40e_vsi_alloc_arrays(vsi, true);
5843 /* Setup default MSIX irq handler for VSI */
5844 i40e_vsi_setup_irqhandler(vsi, i40e_msix_clean_rings);
5846 pf->vsi[vsi_idx] = vsi;
5851 pf->next_vsi = i - 1;
5854 mutex_unlock(&pf->switch_mutex);
5859 * i40e_vsi_free_arrays - Free queue and vector pointer arrays for the VSI
5860 * @type: VSI pointer
5861 * @free_qvectors: a bool to specify if q_vectors need to be freed.
5863 * On error: returns error code (negative)
5864 * On success: returns 0
5866 static void i40e_vsi_free_arrays(struct i40e_vsi *vsi, bool free_qvectors)
5868 /* free the ring and vector containers */
5869 if (free_qvectors) {
5870 kfree(vsi->q_vectors);
5871 vsi->q_vectors = NULL;
5873 kfree(vsi->tx_rings);
5874 vsi->tx_rings = NULL;
5875 vsi->rx_rings = NULL;
5879 * i40e_vsi_clear - Deallocate the VSI provided
5880 * @vsi: the VSI being un-configured
5882 static int i40e_vsi_clear(struct i40e_vsi *vsi)
5893 mutex_lock(&pf->switch_mutex);
5894 if (!pf->vsi[vsi->idx]) {
5895 dev_err(&pf->pdev->dev, "pf->vsi[%d] is NULL, just free vsi[%d](%p,type %d)\n",
5896 vsi->idx, vsi->idx, vsi, vsi->type);
5900 if (pf->vsi[vsi->idx] != vsi) {
5901 dev_err(&pf->pdev->dev,
5902 "pf->vsi[%d](%p, type %d) != vsi[%d](%p,type %d): no free!\n",
5903 pf->vsi[vsi->idx]->idx,
5905 pf->vsi[vsi->idx]->type,
5906 vsi->idx, vsi, vsi->type);
5910 /* updates the pf for this cleared vsi */
5911 i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
5912 i40e_put_lump(pf->irq_pile, vsi->base_vector, vsi->idx);
5914 i40e_vsi_free_arrays(vsi, true);
5916 pf->vsi[vsi->idx] = NULL;
5917 if (vsi->idx < pf->next_vsi)
5918 pf->next_vsi = vsi->idx;
5921 mutex_unlock(&pf->switch_mutex);
5929 * i40e_vsi_clear_rings - Deallocates the Rx and Tx rings for the provided VSI
5930 * @vsi: the VSI being cleaned
5932 static void i40e_vsi_clear_rings(struct i40e_vsi *vsi)
5936 if (vsi->tx_rings && vsi->tx_rings[0]) {
5937 for (i = 0; i < vsi->alloc_queue_pairs; i++) {
5938 kfree_rcu(vsi->tx_rings[i], rcu);
5939 vsi->tx_rings[i] = NULL;
5940 vsi->rx_rings[i] = NULL;
5946 * i40e_alloc_rings - Allocates the Rx and Tx rings for the provided VSI
5947 * @vsi: the VSI being configured
5949 static int i40e_alloc_rings(struct i40e_vsi *vsi)
5951 struct i40e_pf *pf = vsi->back;
5954 /* Set basic values in the rings to be used later during open() */
5955 for (i = 0; i < vsi->alloc_queue_pairs; i++) {
5956 struct i40e_ring *tx_ring;
5957 struct i40e_ring *rx_ring;
5959 /* allocate space for both Tx and Rx in one shot */
5960 tx_ring = kzalloc(sizeof(struct i40e_ring) * 2, GFP_KERNEL);
5964 tx_ring->queue_index = i;
5965 tx_ring->reg_idx = vsi->base_queue + i;
5966 tx_ring->ring_active = false;
5968 tx_ring->netdev = vsi->netdev;
5969 tx_ring->dev = &pf->pdev->dev;
5970 tx_ring->count = vsi->num_desc;
5972 tx_ring->dcb_tc = 0;
5973 vsi->tx_rings[i] = tx_ring;
5975 rx_ring = &tx_ring[1];
5976 rx_ring->queue_index = i;
5977 rx_ring->reg_idx = vsi->base_queue + i;
5978 rx_ring->ring_active = false;
5980 rx_ring->netdev = vsi->netdev;
5981 rx_ring->dev = &pf->pdev->dev;
5982 rx_ring->count = vsi->num_desc;
5984 rx_ring->dcb_tc = 0;
5985 if (pf->flags & I40E_FLAG_16BYTE_RX_DESC_ENABLED)
5986 set_ring_16byte_desc_enabled(rx_ring);
5988 clear_ring_16byte_desc_enabled(rx_ring);
5989 vsi->rx_rings[i] = rx_ring;
5995 i40e_vsi_clear_rings(vsi);
6000 * i40e_reserve_msix_vectors - Reserve MSI-X vectors in the kernel
6001 * @pf: board private structure
6002 * @vectors: the number of MSI-X vectors to request
6004 * Returns the number of vectors reserved, or error
6006 static int i40e_reserve_msix_vectors(struct i40e_pf *pf, int vectors)
6008 vectors = pci_enable_msix_range(pf->pdev, pf->msix_entries,
6009 I40E_MIN_MSIX, vectors);
6011 dev_info(&pf->pdev->dev,
6012 "MSI-X vector reservation failed: %d\n", vectors);
6016 pf->num_msix_entries = vectors;
6022 * i40e_init_msix - Setup the MSIX capability
6023 * @pf: board private structure
6025 * Work with the OS to set up the MSIX vectors needed.
6027 * Returns 0 on success, negative on failure
6029 static int i40e_init_msix(struct i40e_pf *pf)
6031 i40e_status err = 0;
6032 struct i40e_hw *hw = &pf->hw;
6036 if (!(pf->flags & I40E_FLAG_MSIX_ENABLED))
6039 /* The number of vectors we'll request will be comprised of:
6040 * - Add 1 for "other" cause for Admin Queue events, etc.
6041 * - The number of LAN queue pairs
6042 * - Queues being used for RSS.
6043 * We don't need as many as max_rss_size vectors.
6044 * use rss_size instead in the calculation since that
6045 * is governed by number of cpus in the system.
6046 * - assumes symmetric Tx/Rx pairing
6047 * - The number of VMDq pairs
6048 * Once we count this up, try the request.
6050 * If we can't get what we want, we'll simplify to nearly nothing
6051 * and try again. If that still fails, we punt.
6053 pf->num_lan_msix = pf->num_lan_qps - (pf->rss_size_max - pf->rss_size);
6054 pf->num_vmdq_msix = pf->num_vmdq_qps;
6055 v_budget = 1 + pf->num_lan_msix;
6056 v_budget += (pf->num_vmdq_vsis * pf->num_vmdq_msix);
6057 if (pf->flags & I40E_FLAG_FD_SB_ENABLED)
6060 /* Scale down if necessary, and the rings will share vectors */
6061 v_budget = min_t(int, v_budget, hw->func_caps.num_msix_vectors);
6063 pf->msix_entries = kcalloc(v_budget, sizeof(struct msix_entry),
6065 if (!pf->msix_entries)
6068 for (i = 0; i < v_budget; i++)
6069 pf->msix_entries[i].entry = i;
6070 vec = i40e_reserve_msix_vectors(pf, v_budget);
6071 if (vec < I40E_MIN_MSIX) {
6072 pf->flags &= ~I40E_FLAG_MSIX_ENABLED;
6073 kfree(pf->msix_entries);
6074 pf->msix_entries = NULL;
6077 } else if (vec == I40E_MIN_MSIX) {
6078 /* Adjust for minimal MSIX use */
6079 dev_info(&pf->pdev->dev, "Features disabled, not enough MSI-X vectors\n");
6080 pf->flags &= ~I40E_FLAG_VMDQ_ENABLED;
6081 pf->num_vmdq_vsis = 0;
6082 pf->num_vmdq_qps = 0;
6083 pf->num_vmdq_msix = 0;
6084 pf->num_lan_qps = 1;
6085 pf->num_lan_msix = 1;
6087 } else if (vec != v_budget) {
6088 /* Scale vector usage down */
6089 pf->num_vmdq_msix = 1; /* force VMDqs to only one vector */
6090 vec--; /* reserve the misc vector */
6092 /* partition out the remaining vectors */
6095 pf->num_vmdq_vsis = 1;
6096 pf->num_lan_msix = 1;
6099 pf->num_vmdq_vsis = 1;
6100 pf->num_lan_msix = 2;
6103 pf->num_lan_msix = min_t(int, (vec / 2),
6105 pf->num_vmdq_vsis = min_t(int, (vec - pf->num_lan_msix),
6106 I40E_DEFAULT_NUM_VMDQ_VSI);
6115 * i40e_vsi_alloc_q_vector - Allocate memory for a single interrupt vector
6116 * @vsi: the VSI being configured
6117 * @v_idx: index of the vector in the vsi struct
6119 * We allocate one q_vector. If allocation fails we return -ENOMEM.
6121 static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
6123 struct i40e_q_vector *q_vector;
6125 /* allocate q_vector */
6126 q_vector = kzalloc(sizeof(struct i40e_q_vector), GFP_KERNEL);
6130 q_vector->vsi = vsi;
6131 q_vector->v_idx = v_idx;
6132 cpumask_set_cpu(v_idx, &q_vector->affinity_mask);
6134 netif_napi_add(vsi->netdev, &q_vector->napi,
6135 i40e_napi_poll, vsi->work_limit);
6137 q_vector->rx.latency_range = I40E_LOW_LATENCY;
6138 q_vector->tx.latency_range = I40E_LOW_LATENCY;
6140 /* tie q_vector and vsi together */
6141 vsi->q_vectors[v_idx] = q_vector;
6147 * i40e_vsi_alloc_q_vectors - Allocate memory for interrupt vectors
6148 * @vsi: the VSI being configured
6150 * We allocate one q_vector per queue interrupt. If allocation fails we
6153 static int i40e_vsi_alloc_q_vectors(struct i40e_vsi *vsi)
6155 struct i40e_pf *pf = vsi->back;
6156 int v_idx, num_q_vectors;
6159 /* if not MSIX, give the one vector only to the LAN VSI */
6160 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
6161 num_q_vectors = vsi->num_q_vectors;
6162 else if (vsi == pf->vsi[pf->lan_vsi])
6167 for (v_idx = 0; v_idx < num_q_vectors; v_idx++) {
6168 err = i40e_vsi_alloc_q_vector(vsi, v_idx);
6177 i40e_free_q_vector(vsi, v_idx);
6183 * i40e_init_interrupt_scheme - Determine proper interrupt scheme
6184 * @pf: board private structure to initialize
6186 static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
6190 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
6191 err = i40e_init_msix(pf);
6193 pf->flags &= ~(I40E_FLAG_MSIX_ENABLED |
6194 I40E_FLAG_RSS_ENABLED |
6195 I40E_FLAG_DCB_ENABLED |
6196 I40E_FLAG_SRIOV_ENABLED |
6197 I40E_FLAG_FD_SB_ENABLED |
6198 I40E_FLAG_FD_ATR_ENABLED |
6199 I40E_FLAG_VMDQ_ENABLED);
6201 /* rework the queue expectations without MSIX */
6202 i40e_determine_queue_usage(pf);
6206 if (!(pf->flags & I40E_FLAG_MSIX_ENABLED) &&
6207 (pf->flags & I40E_FLAG_MSI_ENABLED)) {
6208 dev_info(&pf->pdev->dev, "MSI-X not available, trying MSI\n");
6209 err = pci_enable_msi(pf->pdev);
6211 dev_info(&pf->pdev->dev, "MSI init failed - %d\n", err);
6212 pf->flags &= ~I40E_FLAG_MSI_ENABLED;
6216 if (!(pf->flags & (I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED)))
6217 dev_info(&pf->pdev->dev, "MSI-X and MSI not available, falling back to Legacy IRQ\n");
6219 /* track first vector for misc interrupts */
6220 err = i40e_get_lump(pf, pf->irq_pile, 1, I40E_PILE_VALID_BIT-1);
6224 * i40e_setup_misc_vector - Setup the misc vector to handle non queue events
6225 * @pf: board private structure
6227 * This sets up the handler for MSIX 0, which is used to manage the
6228 * non-queue interrupts, e.g. AdminQ and errors. This is not used
6229 * when in MSI or Legacy interrupt mode.
6231 static int i40e_setup_misc_vector(struct i40e_pf *pf)
6233 struct i40e_hw *hw = &pf->hw;
6236 /* Only request the irq if this is the first time through, and
6237 * not when we're rebuilding after a Reset
6239 if (!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state)) {
6240 err = request_irq(pf->msix_entries[0].vector,
6241 i40e_intr, 0, pf->misc_int_name, pf);
6243 dev_info(&pf->pdev->dev,
6244 "request_irq for %s failed: %d\n",
6245 pf->misc_int_name, err);
6250 i40e_enable_misc_int_causes(hw);
6252 /* associate no queues to the misc vector */
6253 wr32(hw, I40E_PFINT_LNKLST0, I40E_QUEUE_END_OF_LIST);
6254 wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), I40E_ITR_8K);
6258 i40e_irq_dynamic_enable_icr0(pf);
6264 * i40e_config_rss - Prepare for RSS if used
6265 * @pf: board private structure
6267 static int i40e_config_rss(struct i40e_pf *pf)
6269 /* Set of random keys generated using kernel random number generator */
6270 static const u32 seed[I40E_PFQF_HKEY_MAX_INDEX + 1] = {0x41b01687,
6271 0x183cfd8c, 0xce880440, 0x580cbc3c, 0x35897377,
6272 0x328b25e1, 0x4fa98922, 0xb7d90c14, 0xd5bad70d,
6273 0xcd15a2c1, 0xe8580225, 0x4a1e9d11, 0xfe5731be};
6274 struct i40e_hw *hw = &pf->hw;
6279 /* Fill out hash function seed */
6280 for (i = 0; i <= I40E_PFQF_HKEY_MAX_INDEX; i++)
6281 wr32(hw, I40E_PFQF_HKEY(i), seed[i]);
6283 /* By default we enable TCP/UDP with IPv4/IPv6 ptypes */
6284 hena = (u64)rd32(hw, I40E_PFQF_HENA(0)) |
6285 ((u64)rd32(hw, I40E_PFQF_HENA(1)) << 32);
6286 hena |= I40E_DEFAULT_RSS_HENA;
6287 wr32(hw, I40E_PFQF_HENA(0), (u32)hena);
6288 wr32(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
6290 /* Populate the LUT with max no. of queues in round robin fashion */
6291 for (i = 0, j = 0; i < pf->hw.func_caps.rss_table_size; i++, j++) {
6293 /* The assumption is that lan qp count will be the highest
6294 * qp count for any PF VSI that needs RSS.
6295 * If multiple VSIs need RSS support, all the qp counts
6296 * for those VSIs should be a power of 2 for RSS to work.
6297 * If LAN VSI is the only consumer for RSS then this requirement
6300 if (j == pf->rss_size)
6302 /* lut = 4-byte sliding window of 4 lut entries */
6303 lut = (lut << 8) | (j &
6304 ((0x1 << pf->hw.func_caps.rss_table_entry_width) - 1));
6305 /* On i = 3, we have 4 entries in lut; write to the register */
6307 wr32(hw, I40E_PFQF_HLUT(i >> 2), lut);
6315 * i40e_reconfig_rss_queues - change number of queues for rss and rebuild
6316 * @pf: board private structure
6317 * @queue_count: the requested queue count for rss.
6319 * returns 0 if rss is not enabled, if enabled returns the final rss queue
6320 * count which may be different from the requested queue count.
6322 int i40e_reconfig_rss_queues(struct i40e_pf *pf, int queue_count)
6324 if (!(pf->flags & I40E_FLAG_RSS_ENABLED))
6327 queue_count = min_t(int, queue_count, pf->rss_size_max);
6328 queue_count = rounddown_pow_of_two(queue_count);
6330 if (queue_count != pf->rss_size) {
6331 i40e_prep_for_reset(pf);
6333 pf->rss_size = queue_count;
6335 i40e_reset_and_rebuild(pf, true);
6336 i40e_config_rss(pf);
6338 dev_info(&pf->pdev->dev, "RSS count: %d\n", pf->rss_size);
6339 return pf->rss_size;
6343 * i40e_sw_init - Initialize general software structures (struct i40e_pf)
6344 * @pf: board private structure to initialize
6346 * i40e_sw_init initializes the Adapter private data structure.
6347 * Fields are initialized based on PCI device information and
6348 * OS network device settings (MTU size).
6350 static int i40e_sw_init(struct i40e_pf *pf)
6355 pf->msg_enable = netif_msg_init(I40E_DEFAULT_MSG_ENABLE,
6356 (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK));
6357 pf->hw.debug_mask = pf->msg_enable | I40E_DEBUG_DIAG;
6358 if (debug != -1 && debug != I40E_DEFAULT_MSG_ENABLE) {
6359 if (I40E_DEBUG_USER & debug)
6360 pf->hw.debug_mask = debug;
6361 pf->msg_enable = netif_msg_init((debug & ~I40E_DEBUG_USER),
6362 I40E_DEFAULT_MSG_ENABLE);
6365 /* Set default capability flags */
6366 pf->flags = I40E_FLAG_RX_CSUM_ENABLED |
6367 I40E_FLAG_MSI_ENABLED |
6368 I40E_FLAG_MSIX_ENABLED |
6369 I40E_FLAG_RX_1BUF_ENABLED;
6371 /* Depending on PF configurations, it is possible that the RSS
6372 * maximum might end up larger than the available queues
6374 pf->rss_size_max = 0x1 << pf->hw.func_caps.rss_table_entry_width;
6375 pf->rss_size_max = min_t(int, pf->rss_size_max,
6376 pf->hw.func_caps.num_tx_qp);
6377 if (pf->hw.func_caps.rss) {
6378 pf->flags |= I40E_FLAG_RSS_ENABLED;
6379 pf->rss_size = min_t(int, pf->rss_size_max, num_online_cpus());
6380 pf->rss_size = rounddown_pow_of_two(pf->rss_size);
6385 /* MFP mode enabled */
6386 if (pf->hw.func_caps.npar_enable || pf->hw.func_caps.mfp_mode_1) {
6387 pf->flags |= I40E_FLAG_MFP_ENABLED;
6388 dev_info(&pf->pdev->dev, "MFP mode Enabled\n");
6391 /* FW/NVM is not yet fixed in this regard */
6392 if ((pf->hw.func_caps.fd_filters_guaranteed > 0) ||
6393 (pf->hw.func_caps.fd_filters_best_effort > 0)) {
6394 pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
6395 pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
6396 if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) {
6397 pf->flags |= I40E_FLAG_FD_SB_ENABLED;
6399 dev_info(&pf->pdev->dev,
6400 "Flow Director Sideband mode Disabled in MFP mode\n");
6402 pf->fdir_pf_filter_count =
6403 pf->hw.func_caps.fd_filters_guaranteed;
6404 pf->hw.fdir_shared_filter_count =
6405 pf->hw.func_caps.fd_filters_best_effort;
6408 if (pf->hw.func_caps.vmdq) {
6409 pf->flags |= I40E_FLAG_VMDQ_ENABLED;
6410 pf->num_vmdq_vsis = I40E_DEFAULT_NUM_VMDQ_VSI;
6411 pf->num_vmdq_qps = I40E_DEFAULT_QUEUES_PER_VMDQ;
6414 #ifdef CONFIG_PCI_IOV
6415 if (pf->hw.func_caps.num_vfs) {
6416 pf->num_vf_qps = I40E_DEFAULT_QUEUES_PER_VF;
6417 pf->flags |= I40E_FLAG_SRIOV_ENABLED;
6418 pf->num_req_vfs = min_t(int,
6419 pf->hw.func_caps.num_vfs,
6422 #endif /* CONFIG_PCI_IOV */
6423 pf->eeprom_version = 0xDEAD;
6424 pf->lan_veb = I40E_NO_VEB;
6425 pf->lan_vsi = I40E_NO_VSI;
6427 /* set up queue assignment tracking */
6428 size = sizeof(struct i40e_lump_tracking)
6429 + (sizeof(u16) * pf->hw.func_caps.num_tx_qp);
6430 pf->qp_pile = kzalloc(size, GFP_KERNEL);
6435 pf->qp_pile->num_entries = pf->hw.func_caps.num_tx_qp;
6436 pf->qp_pile->search_hint = 0;
6438 /* set up vector assignment tracking */
6439 size = sizeof(struct i40e_lump_tracking)
6440 + (sizeof(u16) * pf->hw.func_caps.num_msix_vectors);
6441 pf->irq_pile = kzalloc(size, GFP_KERNEL);
6442 if (!pf->irq_pile) {
6447 pf->irq_pile->num_entries = pf->hw.func_caps.num_msix_vectors;
6448 pf->irq_pile->search_hint = 0;
6450 mutex_init(&pf->switch_mutex);
6457 * i40e_set_ntuple - set the ntuple feature flag and take action
6458 * @pf: board private structure to initialize
6459 * @features: the feature set that the stack is suggesting
6461 * returns a bool to indicate if reset needs to happen
6463 bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features)
6465 bool need_reset = false;
6467 /* Check if Flow Director n-tuple support was enabled or disabled. If
6468 * the state changed, we need to reset.
6470 if (features & NETIF_F_NTUPLE) {
6471 /* Enable filters and mark for reset */
6472 if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
6474 pf->flags |= I40E_FLAG_FD_SB_ENABLED;
6476 /* turn off filters, mark for reset and clear SW filter list */
6477 if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
6479 i40e_fdir_filter_exit(pf);
6481 pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
6482 /* if ATR was disabled it can be re-enabled. */
6483 if (!(pf->flags & I40E_FLAG_FD_ATR_ENABLED))
6484 pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
6490 * i40e_set_features - set the netdev feature flags
6491 * @netdev: ptr to the netdev being adjusted
6492 * @features: the feature set that the stack is suggesting
6494 static int i40e_set_features(struct net_device *netdev,
6495 netdev_features_t features)
6497 struct i40e_netdev_priv *np = netdev_priv(netdev);
6498 struct i40e_vsi *vsi = np->vsi;
6499 struct i40e_pf *pf = vsi->back;
6502 if (features & NETIF_F_HW_VLAN_CTAG_RX)
6503 i40e_vlan_stripping_enable(vsi);
6505 i40e_vlan_stripping_disable(vsi);
6507 need_reset = i40e_set_ntuple(pf, features);
6510 i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
6515 #ifdef CONFIG_I40E_VXLAN
6517 * i40e_get_vxlan_port_idx - Lookup a possibly offloaded for Rx UDP port
6518 * @pf: board private structure
6519 * @port: The UDP port to look up
6521 * Returns the index number or I40E_MAX_PF_UDP_OFFLOAD_PORTS if port not found
6523 static u8 i40e_get_vxlan_port_idx(struct i40e_pf *pf, __be16 port)
6527 for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
6528 if (pf->vxlan_ports[i] == port)
6536 * i40e_add_vxlan_port - Get notifications about VXLAN ports that come up
6537 * @netdev: This physical port's netdev
6538 * @sa_family: Socket Family that VXLAN is notifying us about
6539 * @port: New UDP port number that VXLAN started listening to
6541 static void i40e_add_vxlan_port(struct net_device *netdev,
6542 sa_family_t sa_family, __be16 port)
6544 struct i40e_netdev_priv *np = netdev_priv(netdev);
6545 struct i40e_vsi *vsi = np->vsi;
6546 struct i40e_pf *pf = vsi->back;
6550 if (sa_family == AF_INET6)
6553 idx = i40e_get_vxlan_port_idx(pf, port);
6555 /* Check if port already exists */
6556 if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
6557 netdev_info(netdev, "Port %d already offloaded\n", ntohs(port));
6561 /* Now check if there is space to add the new port */
6562 next_idx = i40e_get_vxlan_port_idx(pf, 0);
6564 if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
6565 netdev_info(netdev, "Maximum number of UDP ports reached, not adding port %d\n",
6570 /* New port: add it and mark its index in the bitmap */
6571 pf->vxlan_ports[next_idx] = port;
6572 pf->pending_vxlan_bitmap |= (1 << next_idx);
6574 pf->flags |= I40E_FLAG_VXLAN_FILTER_SYNC;
6578 * i40e_del_vxlan_port - Get notifications about VXLAN ports that go away
6579 * @netdev: This physical port's netdev
6580 * @sa_family: Socket Family that VXLAN is notifying us about
6581 * @port: UDP port number that VXLAN stopped listening to
6583 static void i40e_del_vxlan_port(struct net_device *netdev,
6584 sa_family_t sa_family, __be16 port)
6586 struct i40e_netdev_priv *np = netdev_priv(netdev);
6587 struct i40e_vsi *vsi = np->vsi;
6588 struct i40e_pf *pf = vsi->back;
6591 if (sa_family == AF_INET6)
6594 idx = i40e_get_vxlan_port_idx(pf, port);
6596 /* Check if port already exists */
6597 if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
6598 /* if port exists, set it to 0 (mark for deletion)
6599 * and make it pending
6601 pf->vxlan_ports[idx] = 0;
6603 pf->pending_vxlan_bitmap |= (1 << idx);
6605 pf->flags |= I40E_FLAG_VXLAN_FILTER_SYNC;
6607 netdev_warn(netdev, "Port %d was not found, not deleting\n",
6614 #ifdef USE_CONST_DEV_UC_CHAR
6615 static int i40e_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
6616 struct net_device *dev,
6617 const unsigned char *addr,
6620 static int i40e_ndo_fdb_add(struct ndmsg *ndm,
6621 struct net_device *dev,
6622 unsigned char *addr,
6626 struct i40e_netdev_priv *np = netdev_priv(dev);
6627 struct i40e_pf *pf = np->vsi->back;
6630 if (!(pf->flags & I40E_FLAG_SRIOV_ENABLED))
6633 /* Hardware does not support aging addresses so if a
6634 * ndm_state is given only allow permanent addresses
6636 if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) {
6637 netdev_info(dev, "FDB only supports static addresses\n");
6641 if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr))
6642 err = dev_uc_add_excl(dev, addr);
6643 else if (is_multicast_ether_addr(addr))
6644 err = dev_mc_add_excl(dev, addr);
6648 /* Only return duplicate errors if NLM_F_EXCL is set */
6649 if (err == -EEXIST && !(flags & NLM_F_EXCL))
6655 #ifndef USE_DEFAULT_FDB_DEL_DUMP
6656 #ifdef USE_CONST_DEV_UC_CHAR
6657 static int i40e_ndo_fdb_del(struct ndmsg *ndm,
6658 struct net_device *dev,
6659 const unsigned char *addr)
6661 static int i40e_ndo_fdb_del(struct ndmsg *ndm,
6662 struct net_device *dev,
6663 unsigned char *addr)
6666 struct i40e_netdev_priv *np = netdev_priv(dev);
6667 struct i40e_pf *pf = np->vsi->back;
6668 int err = -EOPNOTSUPP;
6670 if (ndm->ndm_state & NUD_PERMANENT) {
6671 netdev_info(dev, "FDB only supports static addresses\n");
6675 if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
6676 if (is_unicast_ether_addr(addr))
6677 err = dev_uc_del(dev, addr);
6678 else if (is_multicast_ether_addr(addr))
6679 err = dev_mc_del(dev, addr);
6687 static int i40e_ndo_fdb_dump(struct sk_buff *skb,
6688 struct netlink_callback *cb,
6689 struct net_device *dev,
6692 struct i40e_netdev_priv *np = netdev_priv(dev);
6693 struct i40e_pf *pf = np->vsi->back;
6695 if (pf->flags & I40E_FLAG_SRIOV_ENABLED)
6696 idx = ndo_dflt_fdb_dump(skb, cb, dev, idx);
6701 #endif /* USE_DEFAULT_FDB_DEL_DUMP */
6702 #endif /* HAVE_FDB_OPS */
6703 static const struct net_device_ops i40e_netdev_ops = {
6704 .ndo_open = i40e_open,
6705 .ndo_stop = i40e_close,
6706 .ndo_start_xmit = i40e_lan_xmit_frame,
6707 .ndo_get_stats64 = i40e_get_netdev_stats_struct,
6708 .ndo_set_rx_mode = i40e_set_rx_mode,
6709 .ndo_validate_addr = eth_validate_addr,
6710 .ndo_set_mac_address = i40e_set_mac,
6711 .ndo_change_mtu = i40e_change_mtu,
6712 .ndo_do_ioctl = i40e_ioctl,
6713 .ndo_tx_timeout = i40e_tx_timeout,
6714 .ndo_vlan_rx_add_vid = i40e_vlan_rx_add_vid,
6715 .ndo_vlan_rx_kill_vid = i40e_vlan_rx_kill_vid,
6716 #ifdef CONFIG_NET_POLL_CONTROLLER
6717 .ndo_poll_controller = i40e_netpoll,
6719 .ndo_setup_tc = i40e_setup_tc,
6720 .ndo_set_features = i40e_set_features,
6721 .ndo_set_vf_mac = i40e_ndo_set_vf_mac,
6722 .ndo_set_vf_vlan = i40e_ndo_set_vf_port_vlan,
6723 .ndo_set_vf_tx_rate = i40e_ndo_set_vf_bw,
6724 .ndo_get_vf_config = i40e_ndo_get_vf_config,
6725 .ndo_set_vf_link_state = i40e_ndo_set_vf_link_state,
6726 #ifdef CONFIG_I40E_VXLAN
6727 .ndo_add_vxlan_port = i40e_add_vxlan_port,
6728 .ndo_del_vxlan_port = i40e_del_vxlan_port,
6731 .ndo_fdb_add = i40e_ndo_fdb_add,
6732 #ifndef USE_DEFAULT_FDB_DEL_DUMP
6733 .ndo_fdb_del = i40e_ndo_fdb_del,
6734 .ndo_fdb_dump = i40e_ndo_fdb_dump,
6740 * i40e_config_netdev - Setup the netdev flags
6741 * @vsi: the VSI being configured
6743 * Returns 0 on success, negative value on failure
6745 static int i40e_config_netdev(struct i40e_vsi *vsi)
6747 u8 brdcast[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
6748 struct i40e_pf *pf = vsi->back;
6749 struct i40e_hw *hw = &pf->hw;
6750 struct i40e_netdev_priv *np;
6751 struct net_device *netdev;
6752 u8 mac_addr[ETH_ALEN];
6755 etherdev_size = sizeof(struct i40e_netdev_priv);
6756 netdev = alloc_etherdev_mq(etherdev_size, vsi->alloc_queue_pairs);
6760 vsi->netdev = netdev;
6761 np = netdev_priv(netdev);
6764 netdev->hw_enc_features |= NETIF_F_IP_CSUM |
6765 NETIF_F_GSO_UDP_TUNNEL |
6768 netdev->features = NETIF_F_SG |
6772 NETIF_F_GSO_UDP_TUNNEL |
6773 NETIF_F_HW_VLAN_CTAG_TX |
6774 NETIF_F_HW_VLAN_CTAG_RX |
6775 NETIF_F_HW_VLAN_CTAG_FILTER |
6784 if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
6785 netdev->features |= NETIF_F_NTUPLE;
6787 /* copy netdev features into list of user selectable features */
6788 netdev->hw_features |= netdev->features;
6790 if (vsi->type == I40E_VSI_MAIN) {
6791 SET_NETDEV_DEV(netdev, &pf->pdev->dev);
6792 memcpy(mac_addr, hw->mac.perm_addr, ETH_ALEN);
6794 /* relate the VSI_VMDQ name to the VSI_MAIN name */
6795 snprintf(netdev->name, IFNAMSIZ, "%sv%%d",
6796 pf->vsi[pf->lan_vsi]->netdev->name);
6797 random_ether_addr(mac_addr);
6798 i40e_add_filter(vsi, mac_addr, I40E_VLAN_ANY, false, false);
6800 i40e_add_filter(vsi, brdcast, I40E_VLAN_ANY, false, false);
6802 memcpy(netdev->dev_addr, mac_addr, ETH_ALEN);
6803 memcpy(netdev->perm_addr, mac_addr, ETH_ALEN);
6804 /* vlan gets same features (except vlan offload)
6805 * after any tweaks for specific VSI types
6807 netdev->vlan_features = netdev->features & ~(NETIF_F_HW_VLAN_CTAG_TX |
6808 NETIF_F_HW_VLAN_CTAG_RX |
6809 NETIF_F_HW_VLAN_CTAG_FILTER);
6810 netdev->priv_flags |= IFF_UNICAST_FLT;
6811 netdev->priv_flags |= IFF_SUPP_NOFCS;
6812 /* Setup netdev TC information */
6813 i40e_vsi_config_netdev_tc(vsi, vsi->tc_config.enabled_tc);
6815 netdev->netdev_ops = &i40e_netdev_ops;
6816 netdev->watchdog_timeo = 5 * HZ;
6817 i40e_set_ethtool_ops(netdev);
6823 * i40e_vsi_delete - Delete a VSI from the switch
6824 * @vsi: the VSI being removed
6826 * Returns 0 on success, negative value on failure
6828 static void i40e_vsi_delete(struct i40e_vsi *vsi)
6830 /* remove default VSI is not allowed */
6831 if (vsi == vsi->back->vsi[vsi->back->lan_vsi])
6834 i40e_aq_delete_element(&vsi->back->hw, vsi->seid, NULL);
6839 * i40e_add_vsi - Add a VSI to the switch
6840 * @vsi: the VSI being configured
6842 * This initializes a VSI context depending on the VSI type to be added and
6843 * passes it down to the add_vsi aq command.
6845 static int i40e_add_vsi(struct i40e_vsi *vsi)
6848 struct i40e_mac_filter *f, *ftmp;
6849 struct i40e_pf *pf = vsi->back;
6850 struct i40e_hw *hw = &pf->hw;
6851 struct i40e_vsi_context ctxt;
6852 u8 enabled_tc = 0x1; /* TC0 enabled */
6855 memset(&ctxt, 0, sizeof(ctxt));
6856 switch (vsi->type) {
6858 /* The PF's main VSI is already setup as part of the
6859 * device initialization, so we'll not bother with
6860 * the add_vsi call, but we will retrieve the current
6863 ctxt.seid = pf->main_vsi_seid;
6864 ctxt.pf_num = pf->hw.pf_id;
6866 ret = i40e_aq_get_vsi_params(&pf->hw, &ctxt, NULL);
6867 ctxt.flags = I40E_AQ_VSI_TYPE_PF;
6869 dev_info(&pf->pdev->dev,
6870 "couldn't get pf vsi config, err %d, aq_err %d\n",
6871 ret, pf->hw.aq.asq_last_status);
6874 memcpy(&vsi->info, &ctxt.info, sizeof(ctxt.info));
6875 vsi->info.valid_sections = 0;
6877 vsi->seid = ctxt.seid;
6878 vsi->id = ctxt.vsi_number;
6880 enabled_tc = i40e_pf_get_tc_map(pf);
6882 /* MFP mode setup queue map and update VSI */
6883 if (pf->flags & I40E_FLAG_MFP_ENABLED) {
6884 memset(&ctxt, 0, sizeof(ctxt));
6885 ctxt.seid = pf->main_vsi_seid;
6886 ctxt.pf_num = pf->hw.pf_id;
6888 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, false);
6889 ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
6891 dev_info(&pf->pdev->dev,
6892 "update vsi failed, aq_err=%d\n",
6893 pf->hw.aq.asq_last_status);
6897 /* update the local VSI info queue map */
6898 i40e_vsi_update_queue_map(vsi, &ctxt);
6899 vsi->info.valid_sections = 0;
6901 /* Default/Main VSI is only enabled for TC0
6902 * reconfigure it to enable all TCs that are
6903 * available on the port in SFP mode.
6905 ret = i40e_vsi_config_tc(vsi, enabled_tc);
6907 dev_info(&pf->pdev->dev,
6908 "failed to configure TCs for main VSI tc_map 0x%08x, err %d, aq_err %d\n",
6910 pf->hw.aq.asq_last_status);
6917 ctxt.pf_num = hw->pf_id;
6919 ctxt.uplink_seid = vsi->uplink_seid;
6920 ctxt.connection_type = 0x1; /* regular data port */
6921 ctxt.flags = I40E_AQ_VSI_TYPE_PF;
6922 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
6925 case I40E_VSI_VMDQ2:
6926 ctxt.pf_num = hw->pf_id;
6928 ctxt.uplink_seid = vsi->uplink_seid;
6929 ctxt.connection_type = 0x1; /* regular data port */
6930 ctxt.flags = I40E_AQ_VSI_TYPE_VMDQ2;
6932 ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
6934 /* This VSI is connected to VEB so the switch_id
6935 * should be set to zero by default.
6937 ctxt.info.switch_id = 0;
6938 ctxt.info.switch_id |= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_LOCAL_LB);
6939 ctxt.info.switch_id |= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
6941 /* Setup the VSI tx/rx queue map for TC0 only for now */
6942 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
6945 case I40E_VSI_SRIOV:
6946 ctxt.pf_num = hw->pf_id;
6947 ctxt.vf_num = vsi->vf_id + hw->func_caps.vf_base_id;
6948 ctxt.uplink_seid = vsi->uplink_seid;
6949 ctxt.connection_type = 0x1; /* regular data port */
6950 ctxt.flags = I40E_AQ_VSI_TYPE_VF;
6952 ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
6954 /* This VSI is connected to VEB so the switch_id
6955 * should be set to zero by default.
6957 ctxt.info.switch_id = cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
6959 ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
6960 ctxt.info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_ALL;
6961 /* Setup the VSI tx/rx queue map for TC0 only for now */
6962 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
6969 if (vsi->type != I40E_VSI_MAIN) {
6970 ret = i40e_aq_add_vsi(hw, &ctxt, NULL);
6972 dev_info(&vsi->back->pdev->dev,
6973 "add vsi failed, aq_err=%d\n",
6974 vsi->back->hw.aq.asq_last_status);
6978 memcpy(&vsi->info, &ctxt.info, sizeof(ctxt.info));
6979 vsi->info.valid_sections = 0;
6980 vsi->seid = ctxt.seid;
6981 vsi->id = ctxt.vsi_number;
6984 /* If macvlan filters already exist, force them to get loaded */
6985 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
6990 vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
6991 pf->flags |= I40E_FLAG_FILTER_SYNC;
6994 /* Update VSI BW information */
6995 ret = i40e_vsi_get_bw_info(vsi);
6997 dev_info(&pf->pdev->dev,
6998 "couldn't get vsi bw info, err %d, aq_err %d\n",
6999 ret, pf->hw.aq.asq_last_status);
7000 /* VSI is already added so not tearing that up */
7009 * i40e_vsi_release - Delete a VSI and free its resources
7010 * @vsi: the VSI being removed
7012 * Returns 0 on success or < 0 on error
7014 int i40e_vsi_release(struct i40e_vsi *vsi)
7016 struct i40e_mac_filter *f, *ftmp;
7017 struct i40e_veb *veb = NULL;
7024 /* release of a VEB-owner or last VSI is not allowed */
7025 if (vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
7026 dev_info(&pf->pdev->dev, "VSI %d has existing VEB %d\n",
7027 vsi->seid, vsi->uplink_seid);
7030 if (vsi == pf->vsi[pf->lan_vsi] &&
7031 !test_bit(__I40E_DOWN, &pf->state)) {
7032 dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
7036 uplink_seid = vsi->uplink_seid;
7037 if (vsi->type != I40E_VSI_SRIOV) {
7038 if (vsi->netdev_registered) {
7039 vsi->netdev_registered = false;
7041 /* results in a call to i40e_close() */
7042 unregister_netdev(vsi->netdev);
7045 i40e_vsi_close(vsi);
7047 i40e_vsi_disable_irq(vsi);
7050 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list)
7051 i40e_del_filter(vsi, f->macaddr, f->vlan,
7052 f->is_vf, f->is_netdev);
7053 i40e_sync_vsi_filters(vsi);
7055 i40e_vsi_delete(vsi);
7056 i40e_vsi_free_q_vectors(vsi);
7058 free_netdev(vsi->netdev);
7061 i40e_vsi_clear_rings(vsi);
7062 i40e_vsi_clear(vsi);
7064 /* If this was the last thing on the VEB, except for the
7065 * controlling VSI, remove the VEB, which puts the controlling
7066 * VSI onto the next level down in the switch.
7068 * Well, okay, there's one more exception here: don't remove
7069 * the orphan VEBs yet. We'll wait for an explicit remove request
7070 * from up the network stack.
7072 for (n = 0, i = 0; i < pf->hw.func_caps.num_vsis; i++) {
7074 pf->vsi[i]->uplink_seid == uplink_seid &&
7075 (pf->vsi[i]->flags & I40E_VSI_FLAG_VEB_OWNER) == 0) {
7076 n++; /* count the VSIs */
7079 for (i = 0; i < I40E_MAX_VEB; i++) {
7082 if (pf->veb[i]->uplink_seid == uplink_seid)
7083 n++; /* count the VEBs */
7084 if (pf->veb[i]->seid == uplink_seid)
7087 if (n == 0 && veb && veb->uplink_seid != 0)
7088 i40e_veb_release(veb);
7094 * i40e_vsi_setup_vectors - Set up the q_vectors for the given VSI
7095 * @vsi: ptr to the VSI
7097 * This should only be called after i40e_vsi_mem_alloc() which allocates the
7098 * corresponding SW VSI structure and initializes num_queue_pairs for the
7099 * newly allocated VSI.
7101 * Returns 0 on success or negative on failure
7103 static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
7106 struct i40e_pf *pf = vsi->back;
7108 if (vsi->q_vectors[0]) {
7109 dev_info(&pf->pdev->dev, "VSI %d has existing q_vectors\n",
7114 if (vsi->base_vector) {
7115 dev_info(&pf->pdev->dev, "VSI %d has non-zero base vector %d\n",
7116 vsi->seid, vsi->base_vector);
7120 ret = i40e_vsi_alloc_q_vectors(vsi);
7122 dev_info(&pf->pdev->dev,
7123 "failed to allocate %d q_vector for VSI %d, ret=%d\n",
7124 vsi->num_q_vectors, vsi->seid, ret);
7125 vsi->num_q_vectors = 0;
7126 goto vector_setup_out;
7129 if (vsi->num_q_vectors)
7130 vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
7131 vsi->num_q_vectors, vsi->idx);
7132 if (vsi->base_vector < 0) {
7133 dev_info(&pf->pdev->dev,
7134 "failed to get queue tracking for VSI %d, err=%d\n",
7135 vsi->seid, vsi->base_vector);
7136 i40e_vsi_free_q_vectors(vsi);
7138 goto vector_setup_out;
7146 * i40e_vsi_reinit_setup - return and reallocate resources for a VSI
7147 * @vsi: pointer to the vsi.
7149 * This re-allocates a vsi's queue resources.
7151 * Returns pointer to the successfully allocated and configured VSI sw struct
7152 * on success, otherwise returns NULL on failure.
7154 static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
7156 struct i40e_pf *pf = vsi->back;
7160 i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
7161 i40e_vsi_clear_rings(vsi);
7163 i40e_vsi_free_arrays(vsi, false);
7164 i40e_set_num_rings_in_vsi(vsi);
7165 ret = i40e_vsi_alloc_arrays(vsi, false);
7169 ret = i40e_get_lump(pf, pf->qp_pile, vsi->alloc_queue_pairs, vsi->idx);
7171 dev_info(&pf->pdev->dev, "VSI %d get_lump failed %d\n",
7175 vsi->base_queue = ret;
7177 /* Update the FW view of the VSI. Force a reset of TC and queue
7178 * layout configurations.
7180 enabled_tc = pf->vsi[pf->lan_vsi]->tc_config.enabled_tc;
7181 pf->vsi[pf->lan_vsi]->tc_config.enabled_tc = 0;
7182 pf->vsi[pf->lan_vsi]->seid = pf->main_vsi_seid;
7183 i40e_vsi_config_tc(pf->vsi[pf->lan_vsi], enabled_tc);
7185 /* assign it some queues */
7186 ret = i40e_alloc_rings(vsi);
7190 /* map all of the rings to the q_vectors */
7191 i40e_vsi_map_rings_to_vectors(vsi);
7195 i40e_vsi_free_q_vectors(vsi);
7196 if (vsi->netdev_registered) {
7197 vsi->netdev_registered = false;
7198 unregister_netdev(vsi->netdev);
7199 free_netdev(vsi->netdev);
7202 i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
7204 i40e_vsi_clear(vsi);
7209 * i40e_vsi_setup - Set up a VSI by a given type
7210 * @pf: board private structure
7212 * @uplink_seid: the switch element to link to
7213 * @param1: usage depends upon VSI type. For VF types, indicates VF id
7215 * This allocates the sw VSI structure and its queue resources, then add a VSI
7216 * to the identified VEB.
7218 * Returns pointer to the successfully allocated and configure VSI sw struct on
7219 * success, otherwise returns NULL on failure.
7221 struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
7222 u16 uplink_seid, u32 param1)
7224 struct i40e_vsi *vsi = NULL;
7225 struct i40e_veb *veb = NULL;
7229 /* The requested uplink_seid must be either
7230 * - the PF's port seid
7231 * no VEB is needed because this is the PF
7232 * or this is a Flow Director special case VSI
7233 * - seid of an existing VEB
7234 * - seid of a VSI that owns an existing VEB
7235 * - seid of a VSI that doesn't own a VEB
7236 * a new VEB is created and the VSI becomes the owner
7237 * - seid of the PF VSI, which is what creates the first VEB
7238 * this is a special case of the previous
7240 * Find which uplink_seid we were given and create a new VEB if needed
7242 for (i = 0; i < I40E_MAX_VEB; i++) {
7243 if (pf->veb[i] && pf->veb[i]->seid == uplink_seid) {
7249 if (!veb && uplink_seid != pf->mac_seid) {
7251 for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
7252 if (pf->vsi[i] && pf->vsi[i]->seid == uplink_seid) {
7258 dev_info(&pf->pdev->dev, "no such uplink_seid %d\n",
7263 if (vsi->uplink_seid == pf->mac_seid)
7264 veb = i40e_veb_setup(pf, 0, pf->mac_seid, vsi->seid,
7265 vsi->tc_config.enabled_tc);
7266 else if ((vsi->flags & I40E_VSI_FLAG_VEB_OWNER) == 0)
7267 veb = i40e_veb_setup(pf, 0, vsi->uplink_seid, vsi->seid,
7268 vsi->tc_config.enabled_tc);
7270 for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
7271 if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
7275 dev_info(&pf->pdev->dev, "couldn't add VEB\n");
7279 vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
7280 uplink_seid = veb->seid;
7283 /* get vsi sw struct */
7284 v_idx = i40e_vsi_mem_alloc(pf, type);
7287 vsi = pf->vsi[v_idx];
7291 vsi->veb_idx = (veb ? veb->idx : I40E_NO_VEB);
7293 if (type == I40E_VSI_MAIN)
7294 pf->lan_vsi = v_idx;
7295 else if (type == I40E_VSI_SRIOV)
7296 vsi->vf_id = param1;
7297 /* assign it some queues */
7298 ret = i40e_get_lump(pf, pf->qp_pile, vsi->alloc_queue_pairs,
7301 dev_info(&pf->pdev->dev, "VSI %d get_lump failed %d\n",
7305 vsi->base_queue = ret;
7307 /* get a VSI from the hardware */
7308 vsi->uplink_seid = uplink_seid;
7309 ret = i40e_add_vsi(vsi);
7313 switch (vsi->type) {
7314 /* setup the netdev if needed */
7316 case I40E_VSI_VMDQ2:
7317 ret = i40e_config_netdev(vsi);
7320 ret = register_netdev(vsi->netdev);
7323 vsi->netdev_registered = true;
7324 netif_carrier_off(vsi->netdev);
7325 #ifdef CONFIG_I40E_DCB
7326 /* Setup DCB netlink interface */
7327 i40e_dcbnl_setup(vsi);
7328 #endif /* CONFIG_I40E_DCB */
7332 /* set up vectors and rings if needed */
7333 ret = i40e_vsi_setup_vectors(vsi);
7337 ret = i40e_alloc_rings(vsi);
7341 /* map all of the rings to the q_vectors */
7342 i40e_vsi_map_rings_to_vectors(vsi);
7344 i40e_vsi_reset_stats(vsi);
7348 /* no netdev or rings for the other VSI types */
7355 i40e_vsi_free_q_vectors(vsi);
7357 if (vsi->netdev_registered) {
7358 vsi->netdev_registered = false;
7359 unregister_netdev(vsi->netdev);
7360 free_netdev(vsi->netdev);
7364 i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
7366 i40e_vsi_clear(vsi);
7372 * i40e_veb_get_bw_info - Query VEB BW information
7373 * @veb: the veb to query
7375 * Query the Tx scheduler BW configuration data for given VEB
7377 static int i40e_veb_get_bw_info(struct i40e_veb *veb)
7379 struct i40e_aqc_query_switching_comp_ets_config_resp ets_data;
7380 struct i40e_aqc_query_switching_comp_bw_config_resp bw_data;
7381 struct i40e_pf *pf = veb->pf;
7382 struct i40e_hw *hw = &pf->hw;
7387 ret = i40e_aq_query_switch_comp_bw_config(hw, veb->seid,
7390 dev_info(&pf->pdev->dev,
7391 "query veb bw config failed, aq_err=%d\n",
7392 hw->aq.asq_last_status);
7396 ret = i40e_aq_query_switch_comp_ets_config(hw, veb->seid,
7399 dev_info(&pf->pdev->dev,
7400 "query veb bw ets config failed, aq_err=%d\n",
7401 hw->aq.asq_last_status);
7405 veb->bw_limit = le16_to_cpu(ets_data.port_bw_limit);
7406 veb->bw_max_quanta = ets_data.tc_bw_max;
7407 veb->is_abs_credits = bw_data.absolute_credits_enable;
7408 tc_bw_max = le16_to_cpu(bw_data.tc_bw_max[0]) |
7409 (le16_to_cpu(bw_data.tc_bw_max[1]) << 16);
7410 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
7411 veb->bw_tc_share_credits[i] = bw_data.tc_bw_share_credits[i];
7412 veb->bw_tc_limit_credits[i] =
7413 le16_to_cpu(bw_data.tc_bw_limits[i]);
7414 veb->bw_tc_max_quanta[i] = ((tc_bw_max >> (i*4)) & 0x7);
7422 * i40e_veb_mem_alloc - Allocates the next available struct veb in the PF
7423 * @pf: board private structure
7425 * On error: returns error code (negative)
7426 * On success: returns vsi index in PF (positive)
7428 static int i40e_veb_mem_alloc(struct i40e_pf *pf)
7431 struct i40e_veb *veb;
7434 /* Need to protect the allocation of switch elements at the PF level */
7435 mutex_lock(&pf->switch_mutex);
7437 /* VEB list may be fragmented if VEB creation/destruction has
7438 * been happening. We can afford to do a quick scan to look
7439 * for any free slots in the list.
7441 * find next empty veb slot, looping back around if necessary
7444 while ((i < I40E_MAX_VEB) && (pf->veb[i] != NULL))
7446 if (i >= I40E_MAX_VEB) {
7448 goto err_alloc_veb; /* out of VEB slots! */
7451 veb = kzalloc(sizeof(*veb), GFP_KERNEL);
7458 veb->enabled_tc = 1;
7463 mutex_unlock(&pf->switch_mutex);
7468 * i40e_switch_branch_release - Delete a branch of the switch tree
7469 * @branch: where to start deleting
7471 * This uses recursion to find the tips of the branch to be
7472 * removed, deleting until we get back to and can delete this VEB.
7474 static void i40e_switch_branch_release(struct i40e_veb *branch)
7476 struct i40e_pf *pf = branch->pf;
7477 u16 branch_seid = branch->seid;
7478 u16 veb_idx = branch->idx;
7481 /* release any VEBs on this VEB - RECURSION */
7482 for (i = 0; i < I40E_MAX_VEB; i++) {
7485 if (pf->veb[i]->uplink_seid == branch->seid)
7486 i40e_switch_branch_release(pf->veb[i]);
7489 /* Release the VSIs on this VEB, but not the owner VSI.
7491 * NOTE: Removing the last VSI on a VEB has the SIDE EFFECT of removing
7492 * the VEB itself, so don't use (*branch) after this loop.
7494 for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
7497 if (pf->vsi[i]->uplink_seid == branch_seid &&
7498 (pf->vsi[i]->flags & I40E_VSI_FLAG_VEB_OWNER) == 0) {
7499 i40e_vsi_release(pf->vsi[i]);
7503 /* There's one corner case where the VEB might not have been
7504 * removed, so double check it here and remove it if needed.
7505 * This case happens if the veb was created from the debugfs
7506 * commands and no VSIs were added to it.
7508 if (pf->veb[veb_idx])
7509 i40e_veb_release(pf->veb[veb_idx]);
7513 * i40e_veb_clear - remove veb struct
7514 * @veb: the veb to remove
7516 static void i40e_veb_clear(struct i40e_veb *veb)
7522 struct i40e_pf *pf = veb->pf;
7524 mutex_lock(&pf->switch_mutex);
7525 if (pf->veb[veb->idx] == veb)
7526 pf->veb[veb->idx] = NULL;
7527 mutex_unlock(&pf->switch_mutex);
7534 * i40e_veb_release - Delete a VEB and free its resources
7535 * @veb: the VEB being removed
7537 void i40e_veb_release(struct i40e_veb *veb)
7539 struct i40e_vsi *vsi = NULL;
7545 /* find the remaining VSI and check for extras */
7546 for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
7547 if (pf->vsi[i] && pf->vsi[i]->uplink_seid == veb->seid) {
7553 dev_info(&pf->pdev->dev,
7554 "can't remove VEB %d with %d VSIs left\n",
7559 /* move the remaining VSI to uplink veb */
7560 vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
7561 if (veb->uplink_seid) {
7562 vsi->uplink_seid = veb->uplink_seid;
7563 if (veb->uplink_seid == pf->mac_seid)
7564 vsi->veb_idx = I40E_NO_VEB;
7566 vsi->veb_idx = veb->veb_idx;
7569 vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
7570 vsi->veb_idx = pf->vsi[pf->lan_vsi]->veb_idx;
7573 i40e_aq_delete_element(&pf->hw, veb->seid, NULL);
7574 i40e_veb_clear(veb);
7580 * i40e_add_veb - create the VEB in the switch
7581 * @veb: the VEB to be instantiated
7582 * @vsi: the controlling VSI
7584 static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
7586 bool is_default = false;
7587 bool is_cloud = false;
7590 /* get a VEB from the hardware */
7591 ret = i40e_aq_add_veb(&veb->pf->hw, veb->uplink_seid, vsi->seid,
7592 veb->enabled_tc, is_default,
7593 is_cloud, &veb->seid, NULL);
7595 dev_info(&veb->pf->pdev->dev,
7596 "couldn't add VEB, err %d, aq_err %d\n",
7597 ret, veb->pf->hw.aq.asq_last_status);
7601 /* get statistics counter */
7602 ret = i40e_aq_get_veb_parameters(&veb->pf->hw, veb->seid, NULL, NULL,
7603 &veb->stats_idx, NULL, NULL, NULL);
7605 dev_info(&veb->pf->pdev->dev,
7606 "couldn't get VEB statistics idx, err %d, aq_err %d\n",
7607 ret, veb->pf->hw.aq.asq_last_status);
7610 ret = i40e_veb_get_bw_info(veb);
7612 dev_info(&veb->pf->pdev->dev,
7613 "couldn't get VEB bw info, err %d, aq_err %d\n",
7614 ret, veb->pf->hw.aq.asq_last_status);
7615 i40e_aq_delete_element(&veb->pf->hw, veb->seid, NULL);
7619 vsi->uplink_seid = veb->seid;
7620 vsi->veb_idx = veb->idx;
7621 vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
7627 * i40e_veb_setup - Set up a VEB
7628 * @pf: board private structure
7629 * @flags: VEB setup flags
7630 * @uplink_seid: the switch element to link to
7631 * @vsi_seid: the initial VSI seid
7632 * @enabled_tc: Enabled TC bit-map
7634 * This allocates the sw VEB structure and links it into the switch
7635 * It is possible and legal for this to be a duplicate of an already
7636 * existing VEB. It is also possible for both uplink and vsi seids
7637 * to be zero, in order to create a floating VEB.
7639 * Returns pointer to the successfully allocated VEB sw struct on
7640 * success, otherwise returns NULL on failure.
7642 struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags,
7643 u16 uplink_seid, u16 vsi_seid,
7646 struct i40e_veb *veb, *uplink_veb = NULL;
7647 int vsi_idx, veb_idx;
7650 /* if one seid is 0, the other must be 0 to create a floating relay */
7651 if ((uplink_seid == 0 || vsi_seid == 0) &&
7652 (uplink_seid + vsi_seid != 0)) {
7653 dev_info(&pf->pdev->dev,
7654 "one, not both seid's are 0: uplink=%d vsi=%d\n",
7655 uplink_seid, vsi_seid);
7659 /* make sure there is such a vsi and uplink */
7660 for (vsi_idx = 0; vsi_idx < pf->hw.func_caps.num_vsis; vsi_idx++)
7661 if (pf->vsi[vsi_idx] && pf->vsi[vsi_idx]->seid == vsi_seid)
7663 if (vsi_idx >= pf->hw.func_caps.num_vsis && vsi_seid != 0) {
7664 dev_info(&pf->pdev->dev, "vsi seid %d not found\n",
7669 if (uplink_seid && uplink_seid != pf->mac_seid) {
7670 for (veb_idx = 0; veb_idx < I40E_MAX_VEB; veb_idx++) {
7671 if (pf->veb[veb_idx] &&
7672 pf->veb[veb_idx]->seid == uplink_seid) {
7673 uplink_veb = pf->veb[veb_idx];
7678 dev_info(&pf->pdev->dev,
7679 "uplink seid %d not found\n", uplink_seid);
7684 /* get veb sw struct */
7685 veb_idx = i40e_veb_mem_alloc(pf);
7688 veb = pf->veb[veb_idx];
7690 veb->uplink_seid = uplink_seid;
7691 veb->veb_idx = (uplink_veb ? uplink_veb->idx : I40E_NO_VEB);
7692 veb->enabled_tc = (enabled_tc ? enabled_tc : 0x1);
7694 /* create the VEB in the switch */
7695 ret = i40e_add_veb(veb, pf->vsi[vsi_idx]);
7702 i40e_veb_clear(veb);
7708 * i40e_setup_pf_switch_element - set pf vars based on switch type
7709 * @pf: board private structure
7710 * @ele: element we are building info from
7711 * @num_reported: total number of elements
7712 * @printconfig: should we print the contents
7714 * helper function to assist in extracting a few useful SEID values.
7716 static void i40e_setup_pf_switch_element(struct i40e_pf *pf,
7717 struct i40e_aqc_switch_config_element_resp *ele,
7718 u16 num_reported, bool printconfig)
7720 u16 downlink_seid = le16_to_cpu(ele->downlink_seid);
7721 u16 uplink_seid = le16_to_cpu(ele->uplink_seid);
7722 u8 element_type = ele->element_type;
7723 u16 seid = le16_to_cpu(ele->seid);
7726 dev_info(&pf->pdev->dev,
7727 "type=%d seid=%d uplink=%d downlink=%d\n",
7728 element_type, seid, uplink_seid, downlink_seid);
7730 switch (element_type) {
7731 case I40E_SWITCH_ELEMENT_TYPE_MAC:
7732 pf->mac_seid = seid;
7734 case I40E_SWITCH_ELEMENT_TYPE_VEB:
7736 if (uplink_seid != pf->mac_seid)
7738 if (pf->lan_veb == I40E_NO_VEB) {
7741 /* find existing or else empty VEB */
7742 for (v = 0; v < I40E_MAX_VEB; v++) {
7743 if (pf->veb[v] && (pf->veb[v]->seid == seid)) {
7748 if (pf->lan_veb == I40E_NO_VEB) {
7749 v = i40e_veb_mem_alloc(pf);
7756 pf->veb[pf->lan_veb]->seid = seid;
7757 pf->veb[pf->lan_veb]->uplink_seid = pf->mac_seid;
7758 pf->veb[pf->lan_veb]->pf = pf;
7759 pf->veb[pf->lan_veb]->veb_idx = I40E_NO_VEB;
7761 case I40E_SWITCH_ELEMENT_TYPE_VSI:
7762 if (num_reported != 1)
7764 /* This is immediately after a reset so we can assume this is
7767 pf->mac_seid = uplink_seid;
7768 pf->pf_seid = downlink_seid;
7769 pf->main_vsi_seid = seid;
7771 dev_info(&pf->pdev->dev,
7772 "pf_seid=%d main_vsi_seid=%d\n",
7773 pf->pf_seid, pf->main_vsi_seid);
7775 case I40E_SWITCH_ELEMENT_TYPE_PF:
7776 case I40E_SWITCH_ELEMENT_TYPE_VF:
7777 case I40E_SWITCH_ELEMENT_TYPE_EMP:
7778 case I40E_SWITCH_ELEMENT_TYPE_BMC:
7779 case I40E_SWITCH_ELEMENT_TYPE_PE:
7780 case I40E_SWITCH_ELEMENT_TYPE_PA:
7781 /* ignore these for now */
7784 dev_info(&pf->pdev->dev, "unknown element type=%d seid=%d\n",
7785 element_type, seid);
7791 * i40e_fetch_switch_configuration - Get switch config from firmware
7792 * @pf: board private structure
7793 * @printconfig: should we print the contents
7795 * Get the current switch configuration from the device and
7796 * extract a few useful SEID values.
7798 int i40e_fetch_switch_configuration(struct i40e_pf *pf, bool printconfig)
7800 struct i40e_aqc_get_switch_config_resp *sw_config;
7806 aq_buf = kzalloc(I40E_AQ_LARGE_BUF, GFP_KERNEL);
7810 sw_config = (struct i40e_aqc_get_switch_config_resp *)aq_buf;
7812 u16 num_reported, num_total;
7814 ret = i40e_aq_get_switch_config(&pf->hw, sw_config,
7818 dev_info(&pf->pdev->dev,
7819 "get switch config failed %d aq_err=%x\n",
7820 ret, pf->hw.aq.asq_last_status);
7825 num_reported = le16_to_cpu(sw_config->header.num_reported);
7826 num_total = le16_to_cpu(sw_config->header.num_total);
7829 dev_info(&pf->pdev->dev,
7830 "header: %d reported %d total\n",
7831 num_reported, num_total);
7834 int sz = sizeof(*sw_config) * num_reported;
7836 kfree(pf->sw_config);
7837 pf->sw_config = kzalloc(sz, GFP_KERNEL);
7839 memcpy(pf->sw_config, sw_config, sz);
7842 for (i = 0; i < num_reported; i++) {
7843 struct i40e_aqc_switch_config_element_resp *ele =
7844 &sw_config->element[i];
7846 i40e_setup_pf_switch_element(pf, ele, num_reported,
7849 } while (next_seid != 0);
7856 * i40e_setup_pf_switch - Setup the HW switch on startup or after reset
7857 * @pf: board private structure
7858 * @reinit: if the Main VSI needs to re-initialized.
7860 * Returns 0 on success, negative value on failure
7862 static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
7864 u32 rxfc = 0, txfc = 0, rxfc_reg;
7867 /* find out what's out there already */
7868 ret = i40e_fetch_switch_configuration(pf, false);
7870 dev_info(&pf->pdev->dev,
7871 "couldn't fetch switch config, err %d, aq_err %d\n",
7872 ret, pf->hw.aq.asq_last_status);
7875 i40e_pf_reset_stats(pf);
7877 /* first time setup */
7878 if (pf->lan_vsi == I40E_NO_VSI || reinit) {
7879 struct i40e_vsi *vsi = NULL;
7882 /* Set up the PF VSI associated with the PF's main VSI
7883 * that is already in the HW switch
7885 if (pf->lan_veb != I40E_NO_VEB && pf->veb[pf->lan_veb])
7886 uplink_seid = pf->veb[pf->lan_veb]->seid;
7888 uplink_seid = pf->mac_seid;
7889 if (pf->lan_vsi == I40E_NO_VSI)
7890 vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN, uplink_seid, 0);
7892 vsi = i40e_vsi_reinit_setup(pf->vsi[pf->lan_vsi]);
7894 dev_info(&pf->pdev->dev, "setup of MAIN VSI failed\n");
7895 i40e_fdir_teardown(pf);
7899 /* force a reset of TC and queue layout configurations */
7900 u8 enabled_tc = pf->vsi[pf->lan_vsi]->tc_config.enabled_tc;
7901 pf->vsi[pf->lan_vsi]->tc_config.enabled_tc = 0;
7902 pf->vsi[pf->lan_vsi]->seid = pf->main_vsi_seid;
7903 i40e_vsi_config_tc(pf->vsi[pf->lan_vsi], enabled_tc);
7905 i40e_vlan_stripping_disable(pf->vsi[pf->lan_vsi]);
7907 i40e_fdir_sb_setup(pf);
7909 /* Setup static PF queue filter control settings */
7910 ret = i40e_setup_pf_filter_control(pf);
7912 dev_info(&pf->pdev->dev, "setup_pf_filter_control failed: %d\n",
7914 /* Failure here should not stop continuing other steps */
7917 /* enable RSS in the HW, even for only one queue, as the stack can use
7920 if ((pf->flags & I40E_FLAG_RSS_ENABLED))
7921 i40e_config_rss(pf);
7923 /* fill in link information and enable LSE reporting */
7924 i40e_aq_get_link_info(&pf->hw, true, NULL, NULL);
7925 i40e_link_event(pf);
7927 /* Initialize user-specific link properties */
7928 pf->fc_autoneg_status = ((pf->hw.phy.link_info.an_info &
7929 I40E_AQ_AN_COMPLETED) ? true : false);
7930 /* requested_mode is set in probe or by ethtool */
7931 if (!pf->fc_autoneg_status)
7934 if ((pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX) &&
7935 (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX))
7936 pf->hw.fc.current_mode = I40E_FC_FULL;
7937 else if (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX)
7938 pf->hw.fc.current_mode = I40E_FC_TX_PAUSE;
7939 else if (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX)
7940 pf->hw.fc.current_mode = I40E_FC_RX_PAUSE;
7942 pf->hw.fc.current_mode = I40E_FC_NONE;
7944 /* sync the flow control settings with the auto-neg values */
7945 switch (pf->hw.fc.current_mode) {
7950 case I40E_FC_TX_PAUSE:
7954 case I40E_FC_RX_PAUSE:
7959 case I40E_FC_DEFAULT:
7966 /* no default case, we have to handle all possibilities here */
7969 wr32(&pf->hw, I40E_PRTDCB_FCCFG, txfc << I40E_PRTDCB_FCCFG_TFCE_SHIFT);
7971 rxfc_reg = rd32(&pf->hw, I40E_PRTDCB_MFLCN) &
7972 ~I40E_PRTDCB_MFLCN_RFCE_MASK;
7973 rxfc_reg |= (rxfc << I40E_PRTDCB_MFLCN_RFCE_SHIFT);
7975 wr32(&pf->hw, I40E_PRTDCB_MFLCN, rxfc_reg);
7980 /* disable L2 flow control, user can turn it on if they wish */
7981 wr32(&pf->hw, I40E_PRTDCB_FCCFG, 0);
7982 wr32(&pf->hw, I40E_PRTDCB_MFLCN, rd32(&pf->hw, I40E_PRTDCB_MFLCN) &
7983 ~I40E_PRTDCB_MFLCN_RFCE_MASK);
7992 * i40e_determine_queue_usage - Work out queue distribution
7993 * @pf: board private structure
7995 static void i40e_determine_queue_usage(struct i40e_pf *pf)
7999 pf->num_lan_qps = 0;
8001 /* Find the max queues to be put into basic use. We'll always be
8002 * using TC0, whether or not DCB is running, and TC0 will get the
8005 queues_left = pf->hw.func_caps.num_tx_qp;
8007 if ((queues_left == 1) ||
8008 !(pf->flags & I40E_FLAG_MSIX_ENABLED) ||
8009 !(pf->flags & (I40E_FLAG_RSS_ENABLED | I40E_FLAG_FD_SB_ENABLED |
8010 I40E_FLAG_DCB_ENABLED))) {
8011 /* one qp for PF, no queues for anything else */
8013 pf->rss_size = pf->num_lan_qps = 1;
8015 /* make sure all the fancies are disabled */
8016 pf->flags &= ~(I40E_FLAG_RSS_ENABLED |
8017 I40E_FLAG_FD_SB_ENABLED |
8018 I40E_FLAG_FD_ATR_ENABLED |
8019 I40E_FLAG_DCB_ENABLED |
8020 I40E_FLAG_SRIOV_ENABLED |
8021 I40E_FLAG_VMDQ_ENABLED);
8023 /* Not enough queues for all TCs */
8024 if ((pf->flags & I40E_FLAG_DCB_ENABLED) &&
8025 (queues_left < I40E_MAX_TRAFFIC_CLASS)) {
8026 pf->flags &= ~I40E_FLAG_DCB_ENABLED;
8027 dev_info(&pf->pdev->dev, "not enough queues for DCB. DCB is disabled.\n");
8029 pf->num_lan_qps = pf->rss_size_max;
8030 queues_left -= pf->num_lan_qps;
8033 if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
8034 if (queues_left > 1) {
8035 queues_left -= 1; /* save 1 queue for FD */
8037 pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
8038 dev_info(&pf->pdev->dev, "not enough queues for Flow Director. Flow Director feature is disabled\n");
8042 if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
8043 pf->num_vf_qps && pf->num_req_vfs && queues_left) {
8044 pf->num_req_vfs = min_t(int, pf->num_req_vfs,
8045 (queues_left / pf->num_vf_qps));
8046 queues_left -= (pf->num_req_vfs * pf->num_vf_qps);
8049 if ((pf->flags & I40E_FLAG_VMDQ_ENABLED) &&
8050 pf->num_vmdq_vsis && pf->num_vmdq_qps && queues_left) {
8051 pf->num_vmdq_vsis = min_t(int, pf->num_vmdq_vsis,
8052 (queues_left / pf->num_vmdq_qps));
8053 queues_left -= (pf->num_vmdq_vsis * pf->num_vmdq_qps);
8056 pf->queues_left = queues_left;
8061 * i40e_setup_pf_filter_control - Setup PF static filter control
8062 * @pf: PF to be setup
8064 * i40e_setup_pf_filter_control sets up a pf's initial filter control
8065 * settings. If PE/FCoE are enabled then it will also set the per PF
8066 * based filter sizes required for them. It also enables Flow director,
8067 * ethertype and macvlan type filter settings for the pf.
8069 * Returns 0 on success, negative on failure
8071 static int i40e_setup_pf_filter_control(struct i40e_pf *pf)
8073 struct i40e_filter_control_settings *settings = &pf->filter_settings;
8075 settings->hash_lut_size = I40E_HASH_LUT_SIZE_128;
8077 /* Flow Director is enabled */
8078 if (pf->flags & (I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED))
8079 settings->enable_fdir = true;
8081 /* Ethtype and MACVLAN filters enabled for PF */
8082 settings->enable_ethtype = true;
8083 settings->enable_macvlan = true;
8085 if (i40e_set_filter_control(&pf->hw, settings))
8091 #define INFO_STRING_LEN 255
8092 static void i40e_print_features(struct i40e_pf *pf)
8094 struct i40e_hw *hw = &pf->hw;
8097 string = kzalloc(INFO_STRING_LEN, GFP_KERNEL);
8099 dev_err(&pf->pdev->dev, "Features string allocation failed\n");
8105 buf += sprintf(string, "Features: PF-id[%d] ", hw->pf_id);
8106 #ifdef CONFIG_PCI_IOV
8107 buf += sprintf(buf, "VFs: %d ", pf->num_req_vfs);
8109 buf += sprintf(buf, "VSIs: %d QP: %d ", pf->hw.func_caps.num_vsis,
8110 pf->vsi[pf->lan_vsi]->num_queue_pairs);
8112 if (pf->flags & I40E_FLAG_RSS_ENABLED)
8113 buf += sprintf(buf, "RSS ");
8114 buf += sprintf(buf, "FDir ");
8115 if (pf->flags & I40E_FLAG_FD_ATR_ENABLED)
8116 buf += sprintf(buf, "ATR ");
8117 if (pf->flags & I40E_FLAG_FD_SB_ENABLED)
8118 buf += sprintf(buf, "NTUPLE ");
8119 if (pf->flags & I40E_FLAG_DCB_ENABLED)
8120 buf += sprintf(buf, "DCB ");
8121 if (pf->flags & I40E_FLAG_PTP)
8122 buf += sprintf(buf, "PTP ");
8124 BUG_ON(buf > (string + INFO_STRING_LEN));
8125 dev_info(&pf->pdev->dev, "%s\n", string);
8130 * i40e_probe - Device initialization routine
8131 * @pdev: PCI device information struct
8132 * @ent: entry in i40e_pci_tbl
8134 * i40e_probe initializes a pf identified by a pci_dev structure.
8135 * The OS initialization, configuring of the pf private structure,
8136 * and a hardware reset occur.
8138 * Returns 0 on success, negative on failure
8140 static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
8142 struct i40e_driver_version dv;
8145 static u16 pfs_found;
8151 err = pci_enable_device_mem(pdev);
8155 /* set up for high or low dma */
8156 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
8158 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
8161 "DMA configuration failed: 0x%x\n", err);
8166 /* set up pci connections */
8167 err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
8168 IORESOURCE_MEM), i40e_driver_name);
8170 dev_info(&pdev->dev,
8171 "pci_request_selected_regions failed %d\n", err);
8175 pci_enable_pcie_error_reporting(pdev);
8176 pci_set_master(pdev);
8178 /* Now that we have a PCI connection, we need to do the
8179 * low level device setup. This is primarily setting up
8180 * the Admin Queue structures and then querying for the
8181 * device's current profile information.
8183 pf = kzalloc(sizeof(*pf), GFP_KERNEL);
8190 set_bit(__I40E_DOWN, &pf->state);
8194 hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
8195 pci_resource_len(pdev, 0));
8198 dev_info(&pdev->dev, "ioremap(0x%04x, 0x%04x) failed: 0x%x\n",
8199 (unsigned int)pci_resource_start(pdev, 0),
8200 (unsigned int)pci_resource_len(pdev, 0), err);
8203 hw->vendor_id = pdev->vendor;
8204 hw->device_id = pdev->device;
8205 pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
8206 hw->subsystem_vendor_id = pdev->subsystem_vendor;
8207 hw->subsystem_device_id = pdev->subsystem_device;
8208 hw->bus.device = PCI_SLOT(pdev->devfn);
8209 hw->bus.func = PCI_FUNC(pdev->devfn);
8210 pf->instance = pfs_found;
8212 /* do a special CORER for clearing PXE mode once at init */
8213 if (hw->revision_id == 0 &&
8214 (rd32(hw, I40E_GLLAN_RCTL_0) & I40E_GLLAN_RCTL_0_PXE_MODE_MASK)) {
8215 wr32(hw, I40E_GLGEN_RTRIG, I40E_GLGEN_RTRIG_CORER_MASK);
8220 i40e_clear_pxe_mode(hw);
8223 /* Reset here to make sure all is clean and to define PF 'n' */
8224 err = i40e_pf_reset(hw);
8226 dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err);
8231 hw->aq.num_arq_entries = I40E_AQ_LEN;
8232 hw->aq.num_asq_entries = I40E_AQ_LEN;
8233 hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE;
8234 hw->aq.asq_buf_size = I40E_MAX_AQ_BUF_SIZE;
8235 pf->adminq_work_limit = I40E_AQ_WORK_LIMIT;
8236 snprintf(pf->misc_int_name, sizeof(pf->misc_int_name) - 1,
8238 dev_driver_string(&pf->pdev->dev), pf->hw.pf_id);
8240 err = i40e_init_shared_code(hw);
8242 dev_info(&pdev->dev, "init_shared_code failed: %d\n", err);
8246 /* set up a default setting for link flow control */
8247 pf->hw.fc.requested_mode = I40E_FC_NONE;
8249 err = i40e_init_adminq(hw);
8250 dev_info(&pdev->dev, "%s\n", i40e_fw_version_str(hw));
8252 dev_info(&pdev->dev,
8253 "init_adminq failed: %d expecting API %02x.%02x\n",
8255 I40E_FW_API_VERSION_MAJOR, I40E_FW_API_VERSION_MINOR);
8259 i40e_verify_eeprom(pf);
8261 i40e_clear_pxe_mode(hw);
8262 err = i40e_get_capabilities(pf);
8264 goto err_adminq_setup;
8266 err = i40e_sw_init(pf);
8268 dev_info(&pdev->dev, "sw_init failed: %d\n", err);
8272 err = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
8273 hw->func_caps.num_rx_qp,
8274 pf->fcoe_hmc_cntx_num, pf->fcoe_hmc_filt_num);
8276 dev_info(&pdev->dev, "init_lan_hmc failed: %d\n", err);
8277 goto err_init_lan_hmc;
8280 err = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
8282 dev_info(&pdev->dev, "configure_lan_hmc failed: %d\n", err);
8284 goto err_configure_lan_hmc;
8287 i40e_get_mac_addr(hw, hw->mac.addr);
8288 if (!is_valid_ether_addr(hw->mac.addr)) {
8289 dev_info(&pdev->dev, "invalid MAC address %pM\n", hw->mac.addr);
8293 dev_info(&pdev->dev, "MAC address: %pM\n", hw->mac.addr);
8294 memcpy(hw->mac.perm_addr, hw->mac.addr, ETH_ALEN);
8296 pci_set_drvdata(pdev, pf);
8297 pci_save_state(pdev);
8298 #ifdef CONFIG_I40E_DCB
8299 err = i40e_init_pf_dcb(pf);
8301 dev_info(&pdev->dev, "init_pf_dcb failed: %d\n", err);
8302 pf->flags &= ~I40E_FLAG_DCB_ENABLED;
8303 /* Continue without DCB enabled */
8305 #endif /* CONFIG_I40E_DCB */
8307 /* set up periodic task facility */
8308 setup_timer(&pf->service_timer, i40e_service_timer, (unsigned long)pf);
8309 pf->service_timer_period = HZ;
8311 INIT_WORK(&pf->service_task, i40e_service_task);
8312 clear_bit(__I40E_SERVICE_SCHED, &pf->state);
8313 pf->flags |= I40E_FLAG_NEED_LINK_UPDATE;
8314 pf->link_check_timeout = jiffies;
8316 /* WoL defaults to disabled */
8318 device_set_wakeup_enable(&pf->pdev->dev, pf->wol_en);
8320 /* set up the main switch operations */
8321 i40e_determine_queue_usage(pf);
8322 i40e_init_interrupt_scheme(pf);
8324 /* Set up the *vsi struct based on the number of VSIs in the HW,
8325 * and set up our local tracking of the MAIN PF vsi.
8327 len = sizeof(struct i40e_vsi *) * pf->hw.func_caps.num_vsis;
8328 pf->vsi = kzalloc(len, GFP_KERNEL);
8331 goto err_switch_setup;
8334 err = i40e_setup_pf_switch(pf, false);
8336 dev_info(&pdev->dev, "setup_pf_switch failed: %d\n", err);
8339 /* if FDIR VSI was set up, start it now */
8340 for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
8341 if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
8342 i40e_vsi_open(pf->vsi[i]);
8347 /* The main driver is (mostly) up and happy. We need to set this state
8348 * before setting up the misc vector or we get a race and the vector
8349 * ends up disabled forever.
8351 clear_bit(__I40E_DOWN, &pf->state);
8353 /* In case of MSIX we are going to setup the misc vector right here
8354 * to handle admin queue events etc. In case of legacy and MSI
8355 * the misc functionality and queue processing is combined in
8356 * the same vector and that gets setup at open.
8358 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
8359 err = i40e_setup_misc_vector(pf);
8361 dev_info(&pdev->dev,
8362 "setup of misc vector failed: %d\n", err);
8367 /* prep for VF support */
8368 if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
8369 (pf->flags & I40E_FLAG_MSIX_ENABLED) &&
8370 !test_bit(__I40E_BAD_EEPROM, &pf->state)) {
8373 /* disable link interrupts for VFs */
8374 val = rd32(hw, I40E_PFGEN_PORTMDIO_NUM);
8375 val &= ~I40E_PFGEN_PORTMDIO_NUM_VFLINK_STAT_ENA_MASK;
8376 wr32(hw, I40E_PFGEN_PORTMDIO_NUM, val);
8379 if (pci_num_vf(pdev)) {
8380 dev_info(&pdev->dev,
8381 "Active VFs found, allocating resources.\n");
8382 err = i40e_alloc_vfs(pf, pci_num_vf(pdev));
8384 dev_info(&pdev->dev,
8385 "Error %d allocating resources for existing VFs\n",
8392 i40e_dbg_pf_init(pf);
8394 /* tell the firmware that we're starting */
8395 dv.major_version = DRV_VERSION_MAJOR;
8396 dv.minor_version = DRV_VERSION_MINOR;
8397 dv.build_version = DRV_VERSION_BUILD;
8398 dv.subbuild_version = 0;
8399 strncpy(dv.driver_string, DRV_VERSION, sizeof(dv.driver_string));
8400 i40e_aq_send_driver_version(&pf->hw, &dv, NULL);
8402 /* since everything's happy, start the service_task timer */
8403 mod_timer(&pf->service_timer,
8404 round_jiffies(jiffies + pf->service_timer_period));
8406 /* Get the negotiated link width and speed from PCI config space */
8407 pcie_capability_read_word(pf->pdev, PCI_EXP_LNKSTA, &link_status);
8409 i40e_set_pci_config_data(hw, link_status);
8411 dev_info(&pdev->dev, "PCI-Express: %s %s\n",
8412 (hw->bus.speed == i40e_bus_speed_8000 ? "Speed 8.0GT/s" :
8413 hw->bus.speed == i40e_bus_speed_5000 ? "Speed 5.0GT/s" :
8414 hw->bus.speed == i40e_bus_speed_2500 ? "Speed 2.5GT/s" :
8416 (hw->bus.width == i40e_bus_width_pcie_x8 ? "Width x8" :
8417 hw->bus.width == i40e_bus_width_pcie_x4 ? "Width x4" :
8418 hw->bus.width == i40e_bus_width_pcie_x2 ? "Width x2" :
8419 hw->bus.width == i40e_bus_width_pcie_x1 ? "Width x1" :
8422 if (hw->bus.width < i40e_bus_width_pcie_x8 ||
8423 hw->bus.speed < i40e_bus_speed_8000) {
8424 dev_warn(&pdev->dev, "PCI-Express bandwidth available for this device may be insufficient for optimal performance.\n");
8425 dev_warn(&pdev->dev, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
8428 /* print a string summarizing features */
8429 i40e_print_features(pf);
8433 /* Unwind what we've done if something failed in the setup */
8435 set_bit(__I40E_DOWN, &pf->state);
8436 i40e_clear_interrupt_scheme(pf);
8439 i40e_reset_interrupt_capability(pf);
8440 del_timer_sync(&pf->service_timer);
8442 err_configure_lan_hmc:
8443 (void)i40e_shutdown_lan_hmc(hw);
8446 kfree(pf->irq_pile);
8449 (void)i40e_shutdown_adminq(hw);
8451 iounmap(hw->hw_addr);
8455 pci_disable_pcie_error_reporting(pdev);
8456 pci_release_selected_regions(pdev,
8457 pci_select_bars(pdev, IORESOURCE_MEM));
8460 pci_disable_device(pdev);
8465 * i40e_remove - Device removal routine
8466 * @pdev: PCI device information struct
8468 * i40e_remove is called by the PCI subsystem to alert the driver
8469 * that is should release a PCI device. This could be caused by a
8470 * Hot-Plug event, or because the driver is going to be removed from
8473 static void i40e_remove(struct pci_dev *pdev)
8475 struct i40e_pf *pf = pci_get_drvdata(pdev);
8476 i40e_status ret_code;
8480 i40e_dbg_pf_exit(pf);
8484 /* no more scheduling of any task */
8485 set_bit(__I40E_DOWN, &pf->state);
8486 del_timer_sync(&pf->service_timer);
8487 cancel_work_sync(&pf->service_task);
8489 if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
8491 pf->flags &= ~I40E_FLAG_SRIOV_ENABLED;
8494 i40e_fdir_teardown(pf);
8496 /* If there is a switch structure or any orphans, remove them.
8497 * This will leave only the PF's VSI remaining.
8499 for (i = 0; i < I40E_MAX_VEB; i++) {
8503 if (pf->veb[i]->uplink_seid == pf->mac_seid ||
8504 pf->veb[i]->uplink_seid == 0)
8505 i40e_switch_branch_release(pf->veb[i]);
8508 /* Now we can shutdown the PF's VSI, just before we kill
8511 if (pf->vsi[pf->lan_vsi])
8512 i40e_vsi_release(pf->vsi[pf->lan_vsi]);
8514 i40e_stop_misc_vector(pf);
8515 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
8516 synchronize_irq(pf->msix_entries[0].vector);
8517 free_irq(pf->msix_entries[0].vector, pf);
8520 /* shutdown and destroy the HMC */
8521 ret_code = i40e_shutdown_lan_hmc(&pf->hw);
8523 dev_warn(&pdev->dev,
8524 "Failed to destroy the HMC resources: %d\n", ret_code);
8526 /* shutdown the adminq */
8527 ret_code = i40e_shutdown_adminq(&pf->hw);
8529 dev_warn(&pdev->dev,
8530 "Failed to destroy the Admin Queue resources: %d\n",
8533 /* Clear all dynamic memory lists of rings, q_vectors, and VSIs */
8534 i40e_clear_interrupt_scheme(pf);
8535 for (i = 0; i < pf->hw.func_caps.num_vsis; i++) {
8537 i40e_vsi_clear_rings(pf->vsi[i]);
8538 i40e_vsi_clear(pf->vsi[i]);
8543 for (i = 0; i < I40E_MAX_VEB; i++) {
8549 kfree(pf->irq_pile);
8550 kfree(pf->sw_config);
8553 /* force a PF reset to clean anything leftover */
8554 reg = rd32(&pf->hw, I40E_PFGEN_CTRL);
8555 wr32(&pf->hw, I40E_PFGEN_CTRL, (reg | I40E_PFGEN_CTRL_PFSWR_MASK));
8556 i40e_flush(&pf->hw);
8558 iounmap(pf->hw.hw_addr);
8560 pci_release_selected_regions(pdev,
8561 pci_select_bars(pdev, IORESOURCE_MEM));
8563 pci_disable_pcie_error_reporting(pdev);
8564 pci_disable_device(pdev);
8568 * i40e_pci_error_detected - warning that something funky happened in PCI land
8569 * @pdev: PCI device information struct
8571 * Called to warn that something happened and the error handling steps
8572 * are in progress. Allows the driver to quiesce things, be ready for
8575 static pci_ers_result_t i40e_pci_error_detected(struct pci_dev *pdev,
8576 enum pci_channel_state error)
8578 struct i40e_pf *pf = pci_get_drvdata(pdev);
8580 dev_info(&pdev->dev, "%s: error %d\n", __func__, error);
8582 /* shutdown all operations */
8583 if (!test_bit(__I40E_SUSPENDED, &pf->state)) {
8585 i40e_prep_for_reset(pf);
8589 /* Request a slot reset */
8590 return PCI_ERS_RESULT_NEED_RESET;
8594 * i40e_pci_error_slot_reset - a PCI slot reset just happened
8595 * @pdev: PCI device information struct
8597 * Called to find if the driver can work with the device now that
8598 * the pci slot has been reset. If a basic connection seems good
8599 * (registers are readable and have sane content) then return a
8600 * happy little PCI_ERS_RESULT_xxx.
8602 static pci_ers_result_t i40e_pci_error_slot_reset(struct pci_dev *pdev)
8604 struct i40e_pf *pf = pci_get_drvdata(pdev);
8605 pci_ers_result_t result;
8609 dev_info(&pdev->dev, "%s\n", __func__);
8610 if (pci_enable_device_mem(pdev)) {
8611 dev_info(&pdev->dev,
8612 "Cannot re-enable PCI device after reset.\n");
8613 result = PCI_ERS_RESULT_DISCONNECT;
8615 pci_set_master(pdev);
8616 pci_restore_state(pdev);
8617 pci_save_state(pdev);
8618 pci_wake_from_d3(pdev, false);
8620 reg = rd32(&pf->hw, I40E_GLGEN_RTRIG);
8622 result = PCI_ERS_RESULT_RECOVERED;
8624 result = PCI_ERS_RESULT_DISCONNECT;
8627 err = pci_cleanup_aer_uncorrect_error_status(pdev);
8629 dev_info(&pdev->dev,
8630 "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
8632 /* non-fatal, continue */
8639 * i40e_pci_error_resume - restart operations after PCI error recovery
8640 * @pdev: PCI device information struct
8642 * Called to allow the driver to bring things back up after PCI error
8643 * and/or reset recovery has finished.
8645 static void i40e_pci_error_resume(struct pci_dev *pdev)
8647 struct i40e_pf *pf = pci_get_drvdata(pdev);
8649 dev_info(&pdev->dev, "%s\n", __func__);
8650 if (test_bit(__I40E_SUSPENDED, &pf->state))
8654 i40e_handle_reset_warning(pf);
8659 * i40e_shutdown - PCI callback for shutting down
8660 * @pdev: PCI device information struct
8662 static void i40e_shutdown(struct pci_dev *pdev)
8664 struct i40e_pf *pf = pci_get_drvdata(pdev);
8665 struct i40e_hw *hw = &pf->hw;
8667 set_bit(__I40E_SUSPENDED, &pf->state);
8668 set_bit(__I40E_DOWN, &pf->state);
8670 i40e_prep_for_reset(pf);
8673 wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
8674 wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
8676 if (system_state == SYSTEM_POWER_OFF) {
8677 pci_wake_from_d3(pdev, pf->wol_en);
8678 pci_set_power_state(pdev, PCI_D3hot);
8684 * i40e_suspend - PCI callback for moving to D3
8685 * @pdev: PCI device information struct
8687 static int i40e_suspend(struct pci_dev *pdev, pm_message_t state)
8689 struct i40e_pf *pf = pci_get_drvdata(pdev);
8690 struct i40e_hw *hw = &pf->hw;
8692 set_bit(__I40E_SUSPENDED, &pf->state);
8693 set_bit(__I40E_DOWN, &pf->state);
8695 i40e_prep_for_reset(pf);
8698 wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
8699 wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
8701 pci_wake_from_d3(pdev, pf->wol_en);
8702 pci_set_power_state(pdev, PCI_D3hot);
8708 * i40e_resume - PCI callback for waking up from D3
8709 * @pdev: PCI device information struct
8711 static int i40e_resume(struct pci_dev *pdev)
8713 struct i40e_pf *pf = pci_get_drvdata(pdev);
8716 pci_set_power_state(pdev, PCI_D0);
8717 pci_restore_state(pdev);
8718 /* pci_restore_state() clears dev->state_saves, so
8719 * call pci_save_state() again to restore it.
8721 pci_save_state(pdev);
8723 err = pci_enable_device_mem(pdev);
8726 "%s: Cannot enable PCI device from suspend\n",
8730 pci_set_master(pdev);
8732 /* no wakeup events while running */
8733 pci_wake_from_d3(pdev, false);
8735 /* handling the reset will rebuild the device state */
8736 if (test_and_clear_bit(__I40E_SUSPENDED, &pf->state)) {
8737 clear_bit(__I40E_DOWN, &pf->state);
8739 i40e_reset_and_rebuild(pf, false);
8747 static const struct pci_error_handlers i40e_err_handler = {
8748 .error_detected = i40e_pci_error_detected,
8749 .slot_reset = i40e_pci_error_slot_reset,
8750 .resume = i40e_pci_error_resume,
8753 static struct pci_driver i40e_driver = {
8754 .name = i40e_driver_name,
8755 .id_table = i40e_pci_tbl,
8756 .probe = i40e_probe,
8757 .remove = i40e_remove,
8759 .suspend = i40e_suspend,
8760 .resume = i40e_resume,
8762 .shutdown = i40e_shutdown,
8763 .err_handler = &i40e_err_handler,
8764 .sriov_configure = i40e_pci_sriov_configure,
8768 * i40e_init_module - Driver registration routine
8770 * i40e_init_module is the first routine called when the driver is
8771 * loaded. All it does is register with the PCI subsystem.
8773 static int __init i40e_init_module(void)
8775 pr_info("%s: %s - version %s\n", i40e_driver_name,
8776 i40e_driver_string, i40e_driver_version_str);
8777 pr_info("%s: %s\n", i40e_driver_name, i40e_copyright);
8779 return pci_register_driver(&i40e_driver);
8781 module_init(i40e_init_module);
8784 * i40e_exit_module - Driver exit cleanup routine
8786 * i40e_exit_module is called just before the driver is removed
8789 static void __exit i40e_exit_module(void)
8791 pci_unregister_driver(&i40e_driver);
8794 module_exit(i40e_exit_module);