]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/net/ethernet/mellanox/mlxsw/pci.h
mlxsw: pci: Remove MLXSW_PCI_RDQS/SDQS defines and checks
[karo-tx-linux.git] / drivers / net / ethernet / mellanox / mlxsw / pci.h
1 /*
2  * drivers/net/ethernet/mellanox/mlxsw/pci.h
3  * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
4  * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. Neither the names of the copyright holders nor the names of its
15  *    contributors may be used to endorse or promote products derived from
16  *    this software without specific prior written permission.
17  *
18  * Alternatively, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") version 2 as published by the Free
20  * Software Foundation.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
23  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
26  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32  * POSSIBILITY OF SUCH DAMAGE.
33  */
34
35 #ifndef _MLXSW_PCI_H
36 #define _MLXSW_PCI_H
37
38 #include <linux/bitops.h>
39
40 #include "item.h"
41
42 #define PCI_DEVICE_ID_MELLANOX_SWITCHX2 0xc738
43 #define MLXSW_PCI_BAR0_SIZE             (1024 * 1024) /* 1MB */
44 #define MLXSW_PCI_PAGE_SIZE             4096
45
46 #define MLXSW_PCI_CIR_BASE                      0x71000
47 #define MLXSW_PCI_CIR_IN_PARAM_HI               MLXSW_PCI_CIR_BASE
48 #define MLXSW_PCI_CIR_IN_PARAM_LO               (MLXSW_PCI_CIR_BASE + 0x04)
49 #define MLXSW_PCI_CIR_IN_MODIFIER               (MLXSW_PCI_CIR_BASE + 0x08)
50 #define MLXSW_PCI_CIR_OUT_PARAM_HI              (MLXSW_PCI_CIR_BASE + 0x0C)
51 #define MLXSW_PCI_CIR_OUT_PARAM_LO              (MLXSW_PCI_CIR_BASE + 0x10)
52 #define MLXSW_PCI_CIR_TOKEN                     (MLXSW_PCI_CIR_BASE + 0x14)
53 #define MLXSW_PCI_CIR_CTRL                      (MLXSW_PCI_CIR_BASE + 0x18)
54 #define MLXSW_PCI_CIR_CTRL_GO_BIT               BIT(23)
55 #define MLXSW_PCI_CIR_CTRL_EVREQ_BIT            BIT(22)
56 #define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT     12
57 #define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT         24
58 #define MLXSW_PCI_CIR_TIMEOUT_MSECS             1000
59
60 #define MLXSW_PCI_SW_RESET                      0xF0010
61 #define MLXSW_PCI_SW_RESET_RST_BIT              BIT(0)
62 #define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS        5000
63
64 #define MLXSW_PCI_DOORBELL_SDQ_OFFSET           0x000
65 #define MLXSW_PCI_DOORBELL_RDQ_OFFSET           0x200
66 #define MLXSW_PCI_DOORBELL_CQ_OFFSET            0x400
67 #define MLXSW_PCI_DOORBELL_EQ_OFFSET            0x600
68 #define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET        0x800
69 #define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET        0xA00
70
71 #define MLXSW_PCI_DOORBELL(offset, type_offset, num)    \
72         ((offset) + (type_offset) + (num) * 4)
73
74 #define MLXSW_PCI_CQS_MAX       96
75 #define MLXSW_PCI_EQS_COUNT     2
76 #define MLXSW_PCI_EQ_ASYNC_NUM  0
77 #define MLXSW_PCI_EQ_COMP_NUM   1
78
79 #define MLXSW_PCI_AQ_PAGES      8
80 #define MLXSW_PCI_AQ_SIZE       (MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES)
81 #define MLXSW_PCI_WQE_SIZE      32 /* 32 bytes per element */
82 #define MLXSW_PCI_CQE_SIZE      16 /* 16 bytes per element */
83 #define MLXSW_PCI_EQE_SIZE      16 /* 16 bytes per element */
84 #define MLXSW_PCI_WQE_COUNT     (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE)
85 #define MLXSW_PCI_CQE_COUNT     (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE_SIZE)
86 #define MLXSW_PCI_EQE_COUNT     (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE)
87 #define MLXSW_PCI_EQE_UPDATE_COUNT      0x80
88
89 #define MLXSW_PCI_WQE_SG_ENTRIES        3
90 #define MLXSW_PCI_WQE_TYPE_ETHERNET     0xA
91
92 /* pci_wqe_c
93  * If set it indicates that a completion should be reported upon
94  * execution of this descriptor.
95  */
96 MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1);
97
98 /* pci_wqe_lp
99  * Local Processing, set if packet should be processed by the local
100  * switch hardware:
101  * For Ethernet EMAD (Direct Route and non Direct Route) -
102  * must be set if packet destination is local device
103  * For InfiniBand CTL - must be set if packet destination is local device
104  * Otherwise it must be clear
105  * Local Process packets must not exceed the size of 2K (including payload
106  * and headers).
107  */
108 MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1);
109
110 /* pci_wqe_type
111  * Packet type.
112  */
113 MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4);
114
115 /* pci_wqe_byte_count
116  * Size of i-th scatter/gather entry, 0 if entry is unused.
117  */
118 MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false);
119
120 /* pci_wqe_address
121  * Physical address of i-th scatter/gather entry.
122  * Gather Entries must be 2Byte aligned.
123  */
124 MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false);
125
126 /* pci_cqe_lag
127  * Packet arrives from a port which is a LAG
128  */
129 MLXSW_ITEM32(pci, cqe, lag, 0x00, 23, 1);
130
131 /* pci_cqe_system_port
132  * When lag=0: System port on which the packet was received
133  * When lag=1:
134  * bits [15:4] LAG ID on which the packet was received
135  * bits [3:0] sub_port on which the packet was received
136  */
137 MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16);
138
139 /* pci_cqe_wqe_counter
140  * WQE count of the WQEs completed on the associated dqn
141  */
142 MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16);
143
144 /* pci_cqe_byte_count
145  * Byte count of received packets including additional two
146  * Reserved Bytes that are append to the end of the frame.
147  * Reserved for Send CQE.
148  */
149 MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
150
151 /* pci_cqe_trap_id
152  * Trap ID that captured the packet.
153  */
154 MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 8);
155
156 /* pci_cqe_crc
157  * Length include CRC. Indicates the length field includes
158  * the packet's CRC.
159  */
160 MLXSW_ITEM32(pci, cqe, crc, 0x0C, 8, 1);
161
162 /* pci_cqe_e
163  * CQE with Error.
164  */
165 MLXSW_ITEM32(pci, cqe, e, 0x0C, 7, 1);
166
167 /* pci_cqe_sr
168  * 1 - Send Queue
169  * 0 - Receive Queue
170  */
171 MLXSW_ITEM32(pci, cqe, sr, 0x0C, 6, 1);
172
173 /* pci_cqe_dqn
174  * Descriptor Queue (DQ) Number.
175  */
176 MLXSW_ITEM32(pci, cqe, dqn, 0x0C, 1, 5);
177
178 /* pci_cqe_owner
179  * Ownership bit.
180  */
181 MLXSW_ITEM32(pci, cqe, owner, 0x0C, 0, 1);
182
183 /* pci_eqe_event_type
184  * Event type.
185  */
186 MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8);
187 #define MLXSW_PCI_EQE_EVENT_TYPE_COMP   0x00
188 #define MLXSW_PCI_EQE_EVENT_TYPE_CMD    0x0A
189
190 /* pci_eqe_event_sub_type
191  * Event type.
192  */
193 MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8);
194
195 /* pci_eqe_cqn
196  * Completion Queue that triggeret this EQE.
197  */
198 MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7);
199
200 /* pci_eqe_owner
201  * Ownership bit.
202  */
203 MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
204
205 /* pci_eqe_cmd_token
206  * Command completion event - token
207  */
208 MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16);
209
210 /* pci_eqe_cmd_status
211  * Command completion event - status
212  */
213 MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8);
214
215 /* pci_eqe_cmd_out_param_h
216  * Command completion event - output parameter - higher part
217  */
218 MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32);
219
220 /* pci_eqe_cmd_out_param_l
221  * Command completion event - output parameter - lower part
222  */
223 MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32);
224
225 #endif