6 config ATH9K_DFS_DEBUGFS
8 depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
10 config ATH9K_BTCOEX_SUPPORT
11 bool "Atheros bluetooth coexistence support"
12 depends on (ATH9K || ATH9K_HTC)
15 Say Y, if you want to use the ath9k/ath9k_htc radios together with
16 Bluetooth modules in the same system.
19 tristate "Atheros 802.11n wireless cards support"
20 depends on MAC80211 && HAS_DMA
27 This module adds support for wireless adapters based on
28 Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
29 of chipsets. For a specific list of supported external
30 cards, laptops that already ship with these cards and
31 APs that come with these cards refer to ath9k wiki
34 http://wireless.kernel.org/en/users/Drivers/ath9k/products
36 If you choose to build a module, it'll be called ath9k.
39 bool "Atheros ath9k PCI/PCIe bus support"
41 depends on ATH9K && PCI
43 This option enables the PCI bus support in ath9k.
45 Say Y, if you have a compatible PCI/PCIe wireless card.
48 bool "Atheros ath9k AHB bus support"
52 This option enables the AHB bus support in ath9k.
54 Say Y, if you have a SoC with a compatible built-in
55 wireless MAC. Say N if unsure.
58 bool "Atheros ath9k debugging"
59 depends on ATH9K && DEBUG_FS
60 select MAC80211_DEBUGFS
63 Say Y, if you need access to ath9k's statistics for
64 interrupts, rate control, etc.
66 Also required for changing debug message flags at run time.
68 config ATH9K_STATION_STATISTICS
69 bool "Detailed station statistics"
70 depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS
71 select MAC80211_DEBUGFS
74 This option enables detailed statistics for association stations.
76 config ATH9K_DFS_CERTIFIED
77 bool "Atheros DFS support for certified platforms"
78 depends on ATH9K && CFG80211_CERTIFICATION_ONUS
81 This option enables DFS support for initiating radiation on
82 ath9k. There is no way to dynamically detect if a card was DFS
83 certified and as such this is left as a build time option. This
84 option should only be enabled by system integrators that can
85 guarantee that all the platforms that their kernel will run on
86 have obtained appropriate regulatory body certification for a
87 respective Atheros card by using ath9k on the target shipping
90 This is currently only a placeholder for future DFS support,
91 as DFS support requires more components that still need to be
92 developed. At this point enabling this option won't do anything
93 except increase code size.
96 bool "Atheros ath9k ACK timeout estimation algorithm (EXPERIMENTAL)"
100 This option enables ath9k dynamic ACK timeout estimation algorithm
101 based on ACK frame RX timestamp, TX frame timestamp and frame
105 bool "Atheros ath9k TX99 testing support"
106 depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
109 Say N. This should only be enabled on systems undergoing
110 certification testing and evaluation in a controlled environment.
111 Enabling this will only enable TX99 support, all other modes of
112 operation will be disabled.
114 TX99 support enables Specific Absorption Rate (SAR) testing.
115 SAR is the unit of measurement for the amount of radio frequency(RF)
116 absorbed by the body when using a wireless device. The RF exposure
117 limits used are expressed in the terms of SAR, which is a measure
118 of the electric and magnetic field strength and power density for
119 transmitters operating at frequencies from 300 kHz to 100 GHz.
120 Regulatory bodies around the world require that wireless device
121 be evaluated to meet the RF exposure limits set forth in the
122 governmental SAR regulations.
125 bool "Wake on Wireless LAN support (EXPERIMENTAL)"
126 depends on ATH9K && PM
129 This option enables Wake on Wireless LAN support for certain cards.
130 Currently, AR9462 is supported.
133 bool "Atheros ath9k rfkill support" if EXPERT
135 depends on RFKILL=y || RFKILL=ATH9K
138 Say Y to have ath9k poll the RF-Kill GPIO every couple of
139 seconds. Turn off to save power, but enable it if you have
140 a platform that can toggle the RF-Kill GPIO.
142 config ATH9K_CHANNEL_CONTEXT
143 bool "Channel Context support"
147 This option enables channel context support in ath9k, which is needed
148 for multi-channel concurrency. Enable this if P2P PowerSave support
152 tristate "Atheros HTC based wireless cards support"
153 depends on USB && MAC80211
160 Support for Atheros HTC based cards.
161 Chipsets supported: AR9271
163 For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
165 The built module will be ath9k_htc.
167 config ATH9K_HTC_DEBUGFS
168 bool "Atheros ath9k_htc debugging"
169 depends on ATH9K_HTC && DEBUG_FS
171 Say Y, if you need access to ath9k_htc's statistics.