1 /******************************************************************************
3 * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/pci.h>
36 #include <linux/slab.h>
37 #include <linux/dma-mapping.h>
38 #include <linux/delay.h>
39 #include <linux/sched.h>
40 #include <linux/skbuff.h>
41 #include <linux/netdevice.h>
42 #include <linux/wireless.h>
43 #include <linux/firmware.h>
44 #include <linux/etherdevice.h>
45 #include <linux/if_arp.h>
47 #include <net/mac80211.h>
49 #include <asm/div64.h>
51 #define DRV_NAME "iwlagn"
53 #include "iwl-eeprom.h"
57 #include "iwl-helpers.h"
59 #include "iwl-calib.h"
63 /******************************************************************************
67 ******************************************************************************/
70 * module name, copyright, version, etc.
72 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
74 #ifdef CONFIG_IWLWIFI_DEBUG
80 #define DRV_VERSION IWLWIFI_VERSION VD
83 MODULE_DESCRIPTION(DRV_DESCRIPTION);
84 MODULE_VERSION(DRV_VERSION);
85 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
86 MODULE_LICENSE("GPL");
87 MODULE_ALIAS("iwl4965");
90 * iwl_commit_rxon - commit staging_rxon to hardware
92 * The RXON command in staging_rxon is committed to the hardware and
93 * the active_rxon structure is updated with the new data. This
94 * function correctly transitions out of the RXON_ASSOC_MSK state if
95 * a HW tune is required based on the RXON structure changes.
97 int iwl_commit_rxon(struct iwl_priv *priv)
99 /* cast away the const for active_rxon in this function */
100 struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
103 !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
105 if (!iwl_is_alive(priv))
108 /* always get timestamp with Rx frame */
109 priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
111 ret = iwl_check_rxon_cmd(priv);
113 IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
118 * receive commit_rxon request
119 * abort any previous channel switch if still in process
121 if (priv->switch_rxon.switch_in_progress &&
122 (priv->switch_rxon.channel != priv->staging_rxon.channel)) {
123 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
124 le16_to_cpu(priv->switch_rxon.channel));
125 iwl_chswitch_done(priv, false);
128 /* If we don't need to send a full RXON, we can use
129 * iwl_rxon_assoc_cmd which is used to reconfigure filter
130 * and other flags for the current radio configuration. */
131 if (!iwl_full_rxon_required(priv)) {
132 ret = iwl_send_rxon_assoc(priv);
134 IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
138 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
139 iwl_print_rx_config_cmd(priv);
143 /* If we are currently associated and the new config requires
144 * an RXON_ASSOC and the new config wants the associated mask enabled,
145 * we must clear the associated from the active configuration
146 * before we apply the new config */
147 if (iwl_is_associated(priv) && new_assoc) {
148 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
149 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
151 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
152 sizeof(struct iwl_rxon_cmd),
155 /* If the mask clearing failed then we set
156 * active_rxon back to what it was previously */
158 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
159 IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
162 iwl_clear_ucode_stations(priv);
163 iwl_restore_stations(priv);
164 ret = iwl_restore_default_wep_keys(priv);
166 IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
171 IWL_DEBUG_INFO(priv, "Sending RXON\n"
172 "* with%s RXON_FILTER_ASSOC_MSK\n"
175 (new_assoc ? "" : "out"),
176 le16_to_cpu(priv->staging_rxon.channel),
177 priv->staging_rxon.bssid_addr);
179 iwl_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto);
181 /* Apply the new configuration
182 * RXON unassoc clears the station table in uCode so restoration of
183 * stations is needed after it (the RXON command) completes
186 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
187 sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
189 IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
192 IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
193 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
194 iwl_clear_ucode_stations(priv);
195 iwl_restore_stations(priv);
196 ret = iwl_restore_default_wep_keys(priv);
198 IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
203 priv->start_calib = 0;
205 /* Apply the new configuration
206 * RXON assoc doesn't clear the station table in uCode,
208 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
209 sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
211 IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
214 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
216 iwl_print_rx_config_cmd(priv);
218 iwl_init_sensitivity(priv);
220 /* If we issue a new RXON command which required a tune then we must
221 * send a new TXPOWER command or we won't be able to Tx any frames */
222 ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
224 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
231 void iwl_update_chain_flags(struct iwl_priv *priv)
234 if (priv->cfg->ops->hcmd->set_rxon_chain)
235 priv->cfg->ops->hcmd->set_rxon_chain(priv);
236 iwlcore_commit_rxon(priv);
239 static void iwl_clear_free_frames(struct iwl_priv *priv)
241 struct list_head *element;
243 IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
246 while (!list_empty(&priv->free_frames)) {
247 element = priv->free_frames.next;
249 kfree(list_entry(element, struct iwl_frame, list));
250 priv->frames_count--;
253 if (priv->frames_count) {
254 IWL_WARN(priv, "%d frames still in use. Did we lose one?\n",
256 priv->frames_count = 0;
260 static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
262 struct iwl_frame *frame;
263 struct list_head *element;
264 if (list_empty(&priv->free_frames)) {
265 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
267 IWL_ERR(priv, "Could not allocate frame!\n");
271 priv->frames_count++;
275 element = priv->free_frames.next;
277 return list_entry(element, struct iwl_frame, list);
280 static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
282 memset(frame, 0, sizeof(*frame));
283 list_add(&frame->list, &priv->free_frames);
286 static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
287 struct ieee80211_hdr *hdr,
290 if (!priv->ibss_beacon)
293 if (priv->ibss_beacon->len > left)
296 memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
298 return priv->ibss_beacon->len;
301 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
302 static void iwl_set_beacon_tim(struct iwl_priv *priv,
303 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
304 u8 *beacon, u32 frame_size)
307 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
310 * The index is relative to frame start but we start looking at the
311 * variable-length part of the beacon.
313 tim_idx = mgmt->u.beacon.variable - beacon;
315 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
316 while ((tim_idx < (frame_size - 2)) &&
317 (beacon[tim_idx] != WLAN_EID_TIM))
318 tim_idx += beacon[tim_idx+1] + 2;
320 /* If TIM field was found, set variables */
321 if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
322 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
323 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
325 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
328 static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
329 struct iwl_frame *frame)
331 struct iwl_tx_beacon_cmd *tx_beacon_cmd;
336 * We have to set up the TX command, the TX Beacon command, and the
340 /* Initialize memory */
341 tx_beacon_cmd = &frame->u.beacon;
342 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
344 /* Set up TX beacon contents */
345 frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
346 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
347 if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
350 /* Set up TX command fields */
351 tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
352 tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
353 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
354 tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
355 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
357 /* Set up TX beacon command fields */
358 iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
361 /* Set up packet rate and flags */
362 rate = iwl_rate_get_lowest_plcp(priv);
363 priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
364 priv->hw_params.valid_tx_ant);
365 rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
366 if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE))
367 rate_flags |= RATE_MCS_CCK_MSK;
368 tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
371 return sizeof(*tx_beacon_cmd) + frame_size;
373 static int iwl_send_beacon_cmd(struct iwl_priv *priv)
375 struct iwl_frame *frame;
376 unsigned int frame_size;
379 frame = iwl_get_free_frame(priv);
381 IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
386 frame_size = iwl_hw_get_beacon_cmd(priv, frame);
388 IWL_ERR(priv, "Error configuring the beacon command\n");
389 iwl_free_frame(priv, frame);
393 rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
396 iwl_free_frame(priv, frame);
401 static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
403 struct iwl_tfd_tb *tb = &tfd->tbs[idx];
405 dma_addr_t addr = get_unaligned_le32(&tb->lo);
406 if (sizeof(dma_addr_t) > sizeof(u32))
408 ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
413 static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx)
415 struct iwl_tfd_tb *tb = &tfd->tbs[idx];
417 return le16_to_cpu(tb->hi_n_len) >> 4;
420 static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx,
421 dma_addr_t addr, u16 len)
423 struct iwl_tfd_tb *tb = &tfd->tbs[idx];
424 u16 hi_n_len = len << 4;
426 put_unaligned_le32(addr, &tb->lo);
427 if (sizeof(dma_addr_t) > sizeof(u32))
428 hi_n_len |= ((addr >> 16) >> 16) & 0xF;
430 tb->hi_n_len = cpu_to_le16(hi_n_len);
432 tfd->num_tbs = idx + 1;
435 static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd)
437 return tfd->num_tbs & 0x1f;
441 * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
442 * @priv - driver private data
445 * Does NOT advance any TFD circular buffer read/write indexes
446 * Does NOT free the TFD itself (which is within circular buffer)
448 void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
450 struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds;
452 struct pci_dev *dev = priv->pci_dev;
453 int index = txq->q.read_ptr;
457 tfd = &tfd_tmp[index];
459 /* Sanity check on number of chunks */
460 num_tbs = iwl_tfd_get_num_tbs(tfd);
462 if (num_tbs >= IWL_NUM_OF_TBS) {
463 IWL_ERR(priv, "Too many chunks: %i\n", num_tbs);
464 /* @todo issue fatal error, it is quite serious situation */
470 pci_unmap_single(dev,
471 dma_unmap_addr(&txq->meta[index], mapping),
472 dma_unmap_len(&txq->meta[index], len),
473 PCI_DMA_BIDIRECTIONAL);
475 /* Unmap chunks, if any. */
476 for (i = 1; i < num_tbs; i++)
477 pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i),
478 iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE);
484 skb = txq->txb[txq->q.read_ptr].skb;
486 /* can be called from irqs-disabled context */
488 dev_kfree_skb_any(skb);
489 txq->txb[txq->q.read_ptr].skb = NULL;
494 int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
495 struct iwl_tx_queue *txq,
496 dma_addr_t addr, u16 len,
500 struct iwl_tfd *tfd, *tfd_tmp;
504 tfd_tmp = (struct iwl_tfd *)txq->tfds;
505 tfd = &tfd_tmp[q->write_ptr];
508 memset(tfd, 0, sizeof(*tfd));
510 num_tbs = iwl_tfd_get_num_tbs(tfd);
512 /* Each TFD can point to a maximum 20 Tx buffers */
513 if (num_tbs >= IWL_NUM_OF_TBS) {
514 IWL_ERR(priv, "Error can not send more than %d chunks\n",
519 BUG_ON(addr & ~DMA_BIT_MASK(36));
520 if (unlikely(addr & ~IWL_TX_DMA_MASK))
521 IWL_ERR(priv, "Unaligned address = %llx\n",
522 (unsigned long long)addr);
524 iwl_tfd_set_tb(tfd, num_tbs, addr, len);
530 * Tell nic where to find circular buffer of Tx Frame Descriptors for
531 * given Tx queue, and enable the DMA channel used for that queue.
533 * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
534 * channels supported in hardware.
536 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
537 struct iwl_tx_queue *txq)
539 int txq_id = txq->q.id;
541 /* Circular buffer (TFD queue in DRAM) physical base address */
542 iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
543 txq->q.dma_addr >> 8);
548 /******************************************************************************
550 * Generic RX handler implementations
552 ******************************************************************************/
553 static void iwl_rx_reply_alive(struct iwl_priv *priv,
554 struct iwl_rx_mem_buffer *rxb)
556 struct iwl_rx_packet *pkt = rxb_addr(rxb);
557 struct iwl_alive_resp *palive;
558 struct delayed_work *pwork;
560 palive = &pkt->u.alive_frame;
562 IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
564 palive->is_valid, palive->ver_type,
565 palive->ver_subtype);
567 if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
568 IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
569 memcpy(&priv->card_alive_init,
571 sizeof(struct iwl_init_alive_resp));
572 pwork = &priv->init_alive_start;
574 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
575 memcpy(&priv->card_alive, &pkt->u.alive_frame,
576 sizeof(struct iwl_alive_resp));
577 pwork = &priv->alive_start;
580 /* We delay the ALIVE response by 5ms to
581 * give the HW RF Kill time to activate... */
582 if (palive->is_valid == UCODE_VALID_OK)
583 queue_delayed_work(priv->workqueue, pwork,
584 msecs_to_jiffies(5));
586 IWL_WARN(priv, "uCode did not respond OK.\n");
589 static void iwl_bg_beacon_update(struct work_struct *work)
591 struct iwl_priv *priv =
592 container_of(work, struct iwl_priv, beacon_update);
593 struct sk_buff *beacon;
595 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
596 beacon = ieee80211_beacon_get(priv->hw, priv->vif);
599 IWL_ERR(priv, "update beacon failed\n");
603 mutex_lock(&priv->mutex);
604 /* new beacon skb is allocated every time; dispose previous.*/
605 if (priv->ibss_beacon)
606 dev_kfree_skb(priv->ibss_beacon);
608 priv->ibss_beacon = beacon;
609 mutex_unlock(&priv->mutex);
611 iwl_send_beacon_cmd(priv);
615 * iwl_bg_statistics_periodic - Timer callback to queue statistics
617 * This callback is provided in order to send a statistics request.
619 * This timer function is continually reset to execute within
620 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
621 * was received. We need to ensure we receive the statistics in order
622 * to update the temperature used for calibrating the TXPOWER.
624 static void iwl_bg_statistics_periodic(unsigned long data)
626 struct iwl_priv *priv = (struct iwl_priv *)data;
628 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
631 /* dont send host command if rf-kill is on */
632 if (!iwl_is_ready_rf(priv))
635 iwl_send_statistics_request(priv, CMD_ASYNC, false);
639 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
640 u32 start_idx, u32 num_events,
644 u32 ptr; /* SRAM byte address of log data */
645 u32 ev, time, data; /* event log data */
646 unsigned long reg_flags;
649 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
651 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
653 /* Make sure device is powered up for SRAM reads */
654 spin_lock_irqsave(&priv->reg_lock, reg_flags);
655 if (iwl_grab_nic_access(priv)) {
656 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
660 /* Set starting address; reads will auto-increment */
661 _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
665 * "time" is actually "data" for mode 0 (no timestamp).
666 * place event id # at far right for easier visual parsing.
668 for (i = 0; i < num_events; i++) {
669 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
670 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
672 trace_iwlwifi_dev_ucode_cont_event(priv,
675 data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
676 trace_iwlwifi_dev_ucode_cont_event(priv,
680 /* Allow device to power down */
681 iwl_release_nic_access(priv);
682 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
685 static void iwl_continuous_event_trace(struct iwl_priv *priv)
687 u32 capacity; /* event log capacity in # entries */
688 u32 base; /* SRAM byte address of event log header */
689 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
690 u32 num_wraps; /* # times uCode wrapped to top of log */
691 u32 next_entry; /* index of next entry to be written by uCode */
693 if (priv->ucode_type == UCODE_INIT)
694 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
696 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
697 if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
698 capacity = iwl_read_targ_mem(priv, base);
699 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
700 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
701 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
705 if (num_wraps == priv->event_log.num_wraps) {
706 iwl_print_cont_event_trace(priv,
707 base, priv->event_log.next_entry,
708 next_entry - priv->event_log.next_entry,
710 priv->event_log.non_wraps_count++;
712 if ((num_wraps - priv->event_log.num_wraps) > 1)
713 priv->event_log.wraps_more_count++;
715 priv->event_log.wraps_once_count++;
716 trace_iwlwifi_dev_ucode_wrap_event(priv,
717 num_wraps - priv->event_log.num_wraps,
718 next_entry, priv->event_log.next_entry);
719 if (next_entry < priv->event_log.next_entry) {
720 iwl_print_cont_event_trace(priv, base,
721 priv->event_log.next_entry,
722 capacity - priv->event_log.next_entry,
725 iwl_print_cont_event_trace(priv, base, 0,
728 iwl_print_cont_event_trace(priv, base,
729 next_entry, capacity - next_entry,
732 iwl_print_cont_event_trace(priv, base, 0,
736 priv->event_log.num_wraps = num_wraps;
737 priv->event_log.next_entry = next_entry;
741 * iwl_bg_ucode_trace - Timer callback to log ucode event
743 * The timer is continually set to execute every
744 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
745 * this function is to perform continuous uCode event logging operation
748 static void iwl_bg_ucode_trace(unsigned long data)
750 struct iwl_priv *priv = (struct iwl_priv *)data;
752 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
755 if (priv->event_log.ucode_trace) {
756 iwl_continuous_event_trace(priv);
757 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
758 mod_timer(&priv->ucode_trace,
759 jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
763 static void iwl_rx_beacon_notif(struct iwl_priv *priv,
764 struct iwl_rx_mem_buffer *rxb)
766 #ifdef CONFIG_IWLWIFI_DEBUG
767 struct iwl_rx_packet *pkt = rxb_addr(rxb);
768 struct iwl4965_beacon_notif *beacon =
769 (struct iwl4965_beacon_notif *)pkt->u.raw;
770 u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
772 IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
773 "tsf %d %d rate %d\n",
774 le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
775 beacon->beacon_notify_hdr.failure_frame,
776 le32_to_cpu(beacon->ibss_mgr_status),
777 le32_to_cpu(beacon->high_tsf),
778 le32_to_cpu(beacon->low_tsf), rate);
781 if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
782 (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
783 queue_work(priv->workqueue, &priv->beacon_update);
786 /* Handle notification from uCode that card's power state is changing
787 * due to software, hardware, or critical temperature RFKILL */
788 static void iwl_rx_card_state_notif(struct iwl_priv *priv,
789 struct iwl_rx_mem_buffer *rxb)
791 struct iwl_rx_packet *pkt = rxb_addr(rxb);
792 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
793 unsigned long status = priv->status;
795 IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
796 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
797 (flags & SW_CARD_DISABLED) ? "Kill" : "On",
798 (flags & CT_CARD_DISABLED) ?
799 "Reached" : "Not reached");
801 if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
804 iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
805 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
807 iwl_write_direct32(priv, HBUS_TARG_MBX_C,
808 HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
810 if (!(flags & RXON_CARD_DISABLED)) {
811 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
812 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
813 iwl_write_direct32(priv, HBUS_TARG_MBX_C,
814 HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
816 if (flags & CT_CARD_DISABLED)
817 iwl_tt_enter_ct_kill(priv);
819 if (!(flags & CT_CARD_DISABLED))
820 iwl_tt_exit_ct_kill(priv);
822 if (flags & HW_CARD_DISABLED)
823 set_bit(STATUS_RF_KILL_HW, &priv->status);
825 clear_bit(STATUS_RF_KILL_HW, &priv->status);
828 if (!(flags & RXON_CARD_DISABLED))
829 iwl_scan_cancel(priv);
831 if ((test_bit(STATUS_RF_KILL_HW, &status) !=
832 test_bit(STATUS_RF_KILL_HW, &priv->status)))
833 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
834 test_bit(STATUS_RF_KILL_HW, &priv->status));
836 wake_up_interruptible(&priv->wait_command_queue);
839 int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
841 if (src == IWL_PWR_SRC_VAUX) {
842 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
843 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
844 APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
845 ~APMG_PS_CTRL_MSK_PWR_SRC);
847 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
848 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
849 ~APMG_PS_CTRL_MSK_PWR_SRC);
855 static void iwl_bg_tx_flush(struct work_struct *work)
857 struct iwl_priv *priv =
858 container_of(work, struct iwl_priv, tx_flush);
860 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
863 /* do nothing if rf-kill is on */
864 if (!iwl_is_ready_rf(priv))
867 if (priv->cfg->ops->lib->txfifo_flush) {
868 IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
869 iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
874 * iwl_setup_rx_handlers - Initialize Rx handler callbacks
876 * Setup the RX handlers for each of the reply types sent from the uCode
879 * This function chains into the hardware specific files for them to setup
880 * any hardware specific handlers as well.
882 static void iwl_setup_rx_handlers(struct iwl_priv *priv)
884 priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
885 priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
886 priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
887 priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
888 iwl_rx_spectrum_measure_notif;
889 priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
890 priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
891 iwl_rx_pm_debug_statistics_notif;
892 priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
895 * The same handler is used for both the REPLY to a discrete
896 * statistics request from the host as well as for the periodic
897 * statistics notifications (after received beacons) from the uCode.
899 priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
900 priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
902 iwl_setup_rx_scan_handlers(priv);
904 /* status change handler */
905 priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif;
907 priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
908 iwl_rx_missed_beacon_notif;
910 priv->rx_handlers[REPLY_RX_PHY_CMD] = iwlagn_rx_reply_rx_phy;
911 priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwlagn_rx_reply_rx;
913 priv->rx_handlers[REPLY_COMPRESSED_BA] = iwlagn_rx_reply_compressed_ba;
914 /* Set up hardware specific Rx handlers */
915 priv->cfg->ops->lib->rx_handler_setup(priv);
919 * iwl_rx_handle - Main entry function for receiving responses from uCode
921 * Uses the priv->rx_handlers callback function array to invoke
922 * the appropriate handlers, including command responses,
923 * frame-received notifications, and other notifications.
925 void iwl_rx_handle(struct iwl_priv *priv)
927 struct iwl_rx_mem_buffer *rxb;
928 struct iwl_rx_packet *pkt;
929 struct iwl_rx_queue *rxq = &priv->rxq;
937 /* uCode's read index (stored in shared DRAM) indicates the last Rx
938 * buffer that the driver may process (last buffer filled by ucode). */
939 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
942 /* Rx interrupt, but nothing sent from uCode */
944 IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
946 /* calculate total frames need to be restock after handling RX */
947 total_empty = r - rxq->write_actual;
949 total_empty += RX_QUEUE_SIZE;
951 if (total_empty > (RX_QUEUE_SIZE / 2))
959 /* If an RXB doesn't have a Rx queue slot associated with it,
960 * then a bug has been introduced in the queue refilling
961 * routines -- catch it here */
964 rxq->queue[i] = NULL;
966 pci_unmap_page(priv->pci_dev, rxb->page_dma,
967 PAGE_SIZE << priv->hw_params.rx_page_order,
971 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
972 len += sizeof(u32); /* account for status word */
973 trace_iwlwifi_dev_rx(priv, pkt, len);
975 /* Reclaim a command buffer only if this packet is a response
976 * to a (driver-originated) command.
977 * If the packet (e.g. Rx frame) originated from uCode,
978 * there is no command buffer to reclaim.
979 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
980 * but apparently a few don't get set; catch them here. */
981 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
982 (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
983 (pkt->hdr.cmd != REPLY_RX) &&
984 (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
985 (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
986 (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
987 (pkt->hdr.cmd != REPLY_TX);
989 /* Based on type of command response or notification,
990 * handle those that need handling via function in
991 * rx_handlers table. See iwl_setup_rx_handlers() */
992 if (priv->rx_handlers[pkt->hdr.cmd]) {
993 IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
994 i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
995 priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
996 priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
998 /* No handling needed */
1000 "r %d i %d No handler needed for %s, 0x%02x\n",
1001 r, i, get_cmd_string(pkt->hdr.cmd),
1006 * XXX: After here, we should always check rxb->page
1007 * against NULL before touching it or its virtual
1008 * memory (pkt). Because some rx_handler might have
1009 * already taken or freed the pages.
1013 /* Invoke any callbacks, transfer the buffer to caller,
1014 * and fire off the (possibly) blocking iwl_send_cmd()
1015 * as we reclaim the driver command queue */
1017 iwl_tx_cmd_complete(priv, rxb);
1019 IWL_WARN(priv, "Claim null rxb?\n");
1022 /* Reuse the page if possible. For notification packets and
1023 * SKBs that fail to Rx correctly, add them back into the
1024 * rx_free list for reuse later. */
1025 spin_lock_irqsave(&rxq->lock, flags);
1026 if (rxb->page != NULL) {
1027 rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
1028 0, PAGE_SIZE << priv->hw_params.rx_page_order,
1029 PCI_DMA_FROMDEVICE);
1030 list_add_tail(&rxb->list, &rxq->rx_free);
1033 list_add_tail(&rxb->list, &rxq->rx_used);
1035 spin_unlock_irqrestore(&rxq->lock, flags);
1037 i = (i + 1) & RX_QUEUE_MASK;
1038 /* If there are a lot of unused frames,
1039 * restock the Rx queue so ucode wont assert. */
1044 iwlagn_rx_replenish_now(priv);
1050 /* Backtrack one entry */
1053 iwlagn_rx_replenish_now(priv);
1055 iwlagn_rx_queue_restock(priv);
1058 /* call this function to flush any scheduled tasklet */
1059 static inline void iwl_synchronize_irq(struct iwl_priv *priv)
1061 /* wait to make sure we flush pending tasklet*/
1062 synchronize_irq(priv->pci_dev->irq);
1063 tasklet_kill(&priv->irq_tasklet);
1066 static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
1068 u32 inta, handled = 0;
1070 unsigned long flags;
1072 #ifdef CONFIG_IWLWIFI_DEBUG
1076 spin_lock_irqsave(&priv->lock, flags);
1078 /* Ack/clear/reset pending uCode interrupts.
1079 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1080 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
1081 inta = iwl_read32(priv, CSR_INT);
1082 iwl_write32(priv, CSR_INT, inta);
1084 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1085 * Any new interrupts that happen after this, either while we're
1086 * in this tasklet, or later, will show up in next ISR/tasklet. */
1087 inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1088 iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
1090 #ifdef CONFIG_IWLWIFI_DEBUG
1091 if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1092 /* just for debug */
1093 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1094 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1095 inta, inta_mask, inta_fh);
1099 spin_unlock_irqrestore(&priv->lock, flags);
1101 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1102 * atomic, make sure that inta covers all the interrupts that
1103 * we've discovered, even if FH interrupt came in just after
1104 * reading CSR_INT. */
1105 if (inta_fh & CSR49_FH_INT_RX_MASK)
1106 inta |= CSR_INT_BIT_FH_RX;
1107 if (inta_fh & CSR49_FH_INT_TX_MASK)
1108 inta |= CSR_INT_BIT_FH_TX;
1110 /* Now service all interrupt bits discovered above. */
1111 if (inta & CSR_INT_BIT_HW_ERR) {
1112 IWL_ERR(priv, "Hardware error detected. Restarting.\n");
1114 /* Tell the device to stop sending interrupts */
1115 iwl_disable_interrupts(priv);
1117 priv->isr_stats.hw++;
1118 iwl_irq_handle_error(priv);
1120 handled |= CSR_INT_BIT_HW_ERR;
1125 #ifdef CONFIG_IWLWIFI_DEBUG
1126 if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1127 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1128 if (inta & CSR_INT_BIT_SCD) {
1129 IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1130 "the frame/frames.\n");
1131 priv->isr_stats.sch++;
1134 /* Alive notification via Rx interrupt will do the real work */
1135 if (inta & CSR_INT_BIT_ALIVE) {
1136 IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1137 priv->isr_stats.alive++;
1141 /* Safely ignore these bits for debug checks below */
1142 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1144 /* HW RF KILL switch toggled */
1145 if (inta & CSR_INT_BIT_RF_KILL) {
1147 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1148 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1151 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1152 hw_rf_kill ? "disable radio" : "enable radio");
1154 priv->isr_stats.rfkill++;
1156 /* driver only loads ucode once setting the interface up.
1157 * the driver allows loading the ucode even if the radio
1158 * is killed. Hence update the killswitch state here. The
1159 * rfkill handler will care about restarting if needed.
1161 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1163 set_bit(STATUS_RF_KILL_HW, &priv->status);
1165 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1166 wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1169 handled |= CSR_INT_BIT_RF_KILL;
1172 /* Chip got too hot and stopped itself */
1173 if (inta & CSR_INT_BIT_CT_KILL) {
1174 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1175 priv->isr_stats.ctkill++;
1176 handled |= CSR_INT_BIT_CT_KILL;
1179 /* Error detected by uCode */
1180 if (inta & CSR_INT_BIT_SW_ERR) {
1181 IWL_ERR(priv, "Microcode SW error detected. "
1182 " Restarting 0x%X.\n", inta);
1183 priv->isr_stats.sw++;
1184 priv->isr_stats.sw_err = inta;
1185 iwl_irq_handle_error(priv);
1186 handled |= CSR_INT_BIT_SW_ERR;
1190 * uCode wakes up after power-down sleep.
1191 * Tell device about any new tx or host commands enqueued,
1192 * and about any Rx buffers made available while asleep.
1194 if (inta & CSR_INT_BIT_WAKEUP) {
1195 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1196 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1197 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1198 iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1199 priv->isr_stats.wakeup++;
1200 handled |= CSR_INT_BIT_WAKEUP;
1203 /* All uCode command responses, including Tx command responses,
1204 * Rx "responses" (frame-received notification), and other
1205 * notifications from uCode come through here*/
1206 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1207 iwl_rx_handle(priv);
1208 priv->isr_stats.rx++;
1209 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1212 /* This "Tx" DMA channel is used only for loading uCode */
1213 if (inta & CSR_INT_BIT_FH_TX) {
1214 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1215 priv->isr_stats.tx++;
1216 handled |= CSR_INT_BIT_FH_TX;
1217 /* Wake up uCode load routine, now that load is complete */
1218 priv->ucode_write_complete = 1;
1219 wake_up_interruptible(&priv->wait_command_queue);
1222 if (inta & ~handled) {
1223 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1224 priv->isr_stats.unhandled++;
1227 if (inta & ~(priv->inta_mask)) {
1228 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1229 inta & ~priv->inta_mask);
1230 IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh);
1233 /* Re-enable all interrupts */
1234 /* only Re-enable if diabled by irq */
1235 if (test_bit(STATUS_INT_ENABLED, &priv->status))
1236 iwl_enable_interrupts(priv);
1237 /* Re-enable RF_KILL if it occurred */
1238 else if (handled & CSR_INT_BIT_RF_KILL)
1239 iwl_enable_rfkill_int(priv);
1241 #ifdef CONFIG_IWLWIFI_DEBUG
1242 if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1243 inta = iwl_read32(priv, CSR_INT);
1244 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1245 inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1246 IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1247 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1252 /* tasklet for iwlagn interrupt */
1253 static void iwl_irq_tasklet(struct iwl_priv *priv)
1257 unsigned long flags;
1259 #ifdef CONFIG_IWLWIFI_DEBUG
1263 spin_lock_irqsave(&priv->lock, flags);
1265 /* Ack/clear/reset pending uCode interrupts.
1266 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1268 /* There is a hardware bug in the interrupt mask function that some
1269 * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
1270 * they are disabled in the CSR_INT_MASK register. Furthermore the
1271 * ICT interrupt handling mechanism has another bug that might cause
1272 * these unmasked interrupts fail to be detected. We workaround the
1273 * hardware bugs here by ACKing all the possible interrupts so that
1274 * interrupt coalescing can still be achieved.
1276 iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask);
1278 inta = priv->_agn.inta;
1280 #ifdef CONFIG_IWLWIFI_DEBUG
1281 if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1282 /* just for debug */
1283 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1284 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
1289 spin_unlock_irqrestore(&priv->lock, flags);
1291 /* saved interrupt in inta variable now we can reset priv->_agn.inta */
1292 priv->_agn.inta = 0;
1294 /* Now service all interrupt bits discovered above. */
1295 if (inta & CSR_INT_BIT_HW_ERR) {
1296 IWL_ERR(priv, "Hardware error detected. Restarting.\n");
1298 /* Tell the device to stop sending interrupts */
1299 iwl_disable_interrupts(priv);
1301 priv->isr_stats.hw++;
1302 iwl_irq_handle_error(priv);
1304 handled |= CSR_INT_BIT_HW_ERR;
1309 #ifdef CONFIG_IWLWIFI_DEBUG
1310 if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1311 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1312 if (inta & CSR_INT_BIT_SCD) {
1313 IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1314 "the frame/frames.\n");
1315 priv->isr_stats.sch++;
1318 /* Alive notification via Rx interrupt will do the real work */
1319 if (inta & CSR_INT_BIT_ALIVE) {
1320 IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1321 priv->isr_stats.alive++;
1325 /* Safely ignore these bits for debug checks below */
1326 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1328 /* HW RF KILL switch toggled */
1329 if (inta & CSR_INT_BIT_RF_KILL) {
1331 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1332 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1335 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1336 hw_rf_kill ? "disable radio" : "enable radio");
1338 priv->isr_stats.rfkill++;
1340 /* driver only loads ucode once setting the interface up.
1341 * the driver allows loading the ucode even if the radio
1342 * is killed. Hence update the killswitch state here. The
1343 * rfkill handler will care about restarting if needed.
1345 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1347 set_bit(STATUS_RF_KILL_HW, &priv->status);
1349 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1350 wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1353 handled |= CSR_INT_BIT_RF_KILL;
1356 /* Chip got too hot and stopped itself */
1357 if (inta & CSR_INT_BIT_CT_KILL) {
1358 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1359 priv->isr_stats.ctkill++;
1360 handled |= CSR_INT_BIT_CT_KILL;
1363 /* Error detected by uCode */
1364 if (inta & CSR_INT_BIT_SW_ERR) {
1365 IWL_ERR(priv, "Microcode SW error detected. "
1366 " Restarting 0x%X.\n", inta);
1367 priv->isr_stats.sw++;
1368 priv->isr_stats.sw_err = inta;
1369 iwl_irq_handle_error(priv);
1370 handled |= CSR_INT_BIT_SW_ERR;
1373 /* uCode wakes up after power-down sleep */
1374 if (inta & CSR_INT_BIT_WAKEUP) {
1375 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1376 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1377 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1378 iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1380 priv->isr_stats.wakeup++;
1382 handled |= CSR_INT_BIT_WAKEUP;
1385 /* All uCode command responses, including Tx command responses,
1386 * Rx "responses" (frame-received notification), and other
1387 * notifications from uCode come through here*/
1388 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
1389 CSR_INT_BIT_RX_PERIODIC)) {
1390 IWL_DEBUG_ISR(priv, "Rx interrupt\n");
1391 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1392 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1393 iwl_write32(priv, CSR_FH_INT_STATUS,
1394 CSR49_FH_INT_RX_MASK);
1396 if (inta & CSR_INT_BIT_RX_PERIODIC) {
1397 handled |= CSR_INT_BIT_RX_PERIODIC;
1398 iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
1400 /* Sending RX interrupt require many steps to be done in the
1402 * 1- write interrupt to current index in ICT table.
1404 * 3- update RX shared data to indicate last write index.
1405 * 4- send interrupt.
1406 * This could lead to RX race, driver could receive RX interrupt
1407 * but the shared data changes does not reflect this;
1408 * periodic interrupt will detect any dangling Rx activity.
1411 /* Disable periodic interrupt; we use it as just a one-shot. */
1412 iwl_write8(priv, CSR_INT_PERIODIC_REG,
1413 CSR_INT_PERIODIC_DIS);
1414 iwl_rx_handle(priv);
1417 * Enable periodic interrupt in 8 msec only if we received
1418 * real RX interrupt (instead of just periodic int), to catch
1419 * any dangling Rx interrupt. If it was just the periodic
1420 * interrupt, there was no dangling Rx activity, and no need
1421 * to extend the periodic interrupt; one-shot is enough.
1423 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
1424 iwl_write8(priv, CSR_INT_PERIODIC_REG,
1425 CSR_INT_PERIODIC_ENA);
1427 priv->isr_stats.rx++;
1430 /* This "Tx" DMA channel is used only for loading uCode */
1431 if (inta & CSR_INT_BIT_FH_TX) {
1432 iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
1433 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1434 priv->isr_stats.tx++;
1435 handled |= CSR_INT_BIT_FH_TX;
1436 /* Wake up uCode load routine, now that load is complete */
1437 priv->ucode_write_complete = 1;
1438 wake_up_interruptible(&priv->wait_command_queue);
1441 if (inta & ~handled) {
1442 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1443 priv->isr_stats.unhandled++;
1446 if (inta & ~(priv->inta_mask)) {
1447 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1448 inta & ~priv->inta_mask);
1451 /* Re-enable all interrupts */
1452 /* only Re-enable if diabled by irq */
1453 if (test_bit(STATUS_INT_ENABLED, &priv->status))
1454 iwl_enable_interrupts(priv);
1455 /* Re-enable RF_KILL if it occurred */
1456 else if (handled & CSR_INT_BIT_RF_KILL)
1457 iwl_enable_rfkill_int(priv);
1460 /* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
1461 #define ACK_CNT_RATIO (50)
1462 #define BA_TIMEOUT_CNT (5)
1463 #define BA_TIMEOUT_MAX (16)
1466 * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
1468 * When the ACK count ratio is 0 and aggregated BA timeout retries exceeding
1469 * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
1472 bool iwl_good_ack_health(struct iwl_priv *priv,
1473 struct iwl_rx_packet *pkt)
1476 int actual_ack_cnt_delta, expected_ack_cnt_delta;
1477 int ba_timeout_delta;
1479 actual_ack_cnt_delta =
1480 le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
1481 le32_to_cpu(priv->_agn.statistics.tx.actual_ack_cnt);
1482 expected_ack_cnt_delta =
1483 le32_to_cpu(pkt->u.stats.tx.expected_ack_cnt) -
1484 le32_to_cpu(priv->_agn.statistics.tx.expected_ack_cnt);
1486 le32_to_cpu(pkt->u.stats.tx.agg.ba_timeout) -
1487 le32_to_cpu(priv->_agn.statistics.tx.agg.ba_timeout);
1488 if ((priv->_agn.agg_tids_count > 0) &&
1489 (expected_ack_cnt_delta > 0) &&
1490 (((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta)
1492 (ba_timeout_delta > BA_TIMEOUT_CNT)) {
1493 IWL_DEBUG_RADIO(priv, "actual_ack_cnt delta = %d,"
1494 " expected_ack_cnt = %d\n",
1495 actual_ack_cnt_delta, expected_ack_cnt_delta);
1497 #ifdef CONFIG_IWLWIFI_DEBUGFS
1499 * This is ifdef'ed on DEBUGFS because otherwise the
1500 * statistics aren't available. If DEBUGFS is set but
1501 * DEBUG is not, these will just compile out.
1503 IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
1504 priv->_agn.delta_statistics.tx.rx_detected_cnt);
1505 IWL_DEBUG_RADIO(priv,
1506 "ack_or_ba_timeout_collision delta = %d\n",
1507 priv->_agn.delta_statistics.tx.
1508 ack_or_ba_timeout_collision);
1510 IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
1512 if (!actual_ack_cnt_delta &&
1513 (ba_timeout_delta >= BA_TIMEOUT_MAX))
1520 /*****************************************************************************
1524 *****************************************************************************/
1526 #ifdef CONFIG_IWLWIFI_DEBUG
1529 * The following adds a new attribute to the sysfs representation
1530 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
1531 * used for controlling the debug level.
1533 * See the level definitions in iwl for details.
1535 * The debug_level being managed using sysfs below is a per device debug
1536 * level that is used instead of the global debug level if it (the per
1537 * device debug level) is set.
1539 static ssize_t show_debug_level(struct device *d,
1540 struct device_attribute *attr, char *buf)
1542 struct iwl_priv *priv = dev_get_drvdata(d);
1543 return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
1545 static ssize_t store_debug_level(struct device *d,
1546 struct device_attribute *attr,
1547 const char *buf, size_t count)
1549 struct iwl_priv *priv = dev_get_drvdata(d);
1553 ret = strict_strtoul(buf, 0, &val);
1555 IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
1557 priv->debug_level = val;
1558 if (iwl_alloc_traffic_mem(priv))
1560 "Not enough memory to generate traffic log\n");
1562 return strnlen(buf, count);
1565 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
1566 show_debug_level, store_debug_level);
1569 #endif /* CONFIG_IWLWIFI_DEBUG */
1572 static ssize_t show_temperature(struct device *d,
1573 struct device_attribute *attr, char *buf)
1575 struct iwl_priv *priv = dev_get_drvdata(d);
1577 if (!iwl_is_alive(priv))
1580 return sprintf(buf, "%d\n", priv->temperature);
1583 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
1585 static ssize_t show_tx_power(struct device *d,
1586 struct device_attribute *attr, char *buf)
1588 struct iwl_priv *priv = dev_get_drvdata(d);
1590 if (!iwl_is_ready_rf(priv))
1591 return sprintf(buf, "off\n");
1593 return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
1596 static ssize_t store_tx_power(struct device *d,
1597 struct device_attribute *attr,
1598 const char *buf, size_t count)
1600 struct iwl_priv *priv = dev_get_drvdata(d);
1604 ret = strict_strtoul(buf, 10, &val);
1606 IWL_INFO(priv, "%s is not in decimal form.\n", buf);
1608 ret = iwl_set_tx_power(priv, val, false);
1610 IWL_ERR(priv, "failed setting tx power (0x%d).\n",
1618 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
1620 static struct attribute *iwl_sysfs_entries[] = {
1621 &dev_attr_temperature.attr,
1622 &dev_attr_tx_power.attr,
1623 #ifdef CONFIG_IWLWIFI_DEBUG
1624 &dev_attr_debug_level.attr,
1629 static struct attribute_group iwl_attribute_group = {
1630 .name = NULL, /* put in device directory */
1631 .attrs = iwl_sysfs_entries,
1634 /******************************************************************************
1636 * uCode download functions
1638 ******************************************************************************/
1640 static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
1642 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
1643 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
1644 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1645 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
1646 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1647 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
1650 static void iwl_nic_start(struct iwl_priv *priv)
1652 /* Remove all resets to allow NIC to operate */
1653 iwl_write32(priv, CSR_RESET, 0);
1656 struct iwlagn_ucode_capabilities {
1657 u32 max_probe_length;
1658 u32 standard_phy_calibration_size;
1661 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
1662 static int iwl_mac_setup_register(struct iwl_priv *priv,
1663 struct iwlagn_ucode_capabilities *capa);
1665 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
1667 const char *name_pre = priv->cfg->fw_name_pre;
1670 priv->fw_index = priv->cfg->ucode_api_max;
1674 if (priv->fw_index < priv->cfg->ucode_api_min) {
1675 IWL_ERR(priv, "no suitable firmware found!\n");
1679 sprintf(priv->firmware_name, "%s%d%s",
1680 name_pre, priv->fw_index, ".ucode");
1682 IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
1683 priv->firmware_name);
1685 return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
1686 &priv->pci_dev->dev, GFP_KERNEL, priv,
1687 iwl_ucode_callback);
1690 struct iwlagn_firmware_pieces {
1691 const void *inst, *data, *init, *init_data, *boot;
1692 size_t inst_size, data_size, init_size, init_data_size, boot_size;
1696 u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
1697 u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
1700 static int iwlagn_load_legacy_firmware(struct iwl_priv *priv,
1701 const struct firmware *ucode_raw,
1702 struct iwlagn_firmware_pieces *pieces)
1704 struct iwl_ucode_header *ucode = (void *)ucode_raw->data;
1705 u32 api_ver, hdr_size;
1708 priv->ucode_ver = le32_to_cpu(ucode->ver);
1709 api_ver = IWL_UCODE_API(priv->ucode_ver);
1714 * 4965 doesn't revision the firmware file format
1715 * along with the API version, it always uses v1
1718 if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) !=
1719 CSR_HW_REV_TYPE_4965) {
1721 if (ucode_raw->size < hdr_size) {
1722 IWL_ERR(priv, "File size too small!\n");
1725 pieces->build = le32_to_cpu(ucode->u.v2.build);
1726 pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
1727 pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
1728 pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
1729 pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
1730 pieces->boot_size = le32_to_cpu(ucode->u.v2.boot_size);
1731 src = ucode->u.v2.data;
1734 /* fall through for 4965 */
1739 if (ucode_raw->size < hdr_size) {
1740 IWL_ERR(priv, "File size too small!\n");
1744 pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size);
1745 pieces->data_size = le32_to_cpu(ucode->u.v1.data_size);
1746 pieces->init_size = le32_to_cpu(ucode->u.v1.init_size);
1747 pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size);
1748 pieces->boot_size = le32_to_cpu(ucode->u.v1.boot_size);
1749 src = ucode->u.v1.data;
1753 /* Verify size of file vs. image size info in file's header */
1754 if (ucode_raw->size != hdr_size + pieces->inst_size +
1755 pieces->data_size + pieces->init_size +
1756 pieces->init_data_size + pieces->boot_size) {
1759 "uCode file size %d does not match expected size\n",
1760 (int)ucode_raw->size);
1765 src += pieces->inst_size;
1767 src += pieces->data_size;
1769 src += pieces->init_size;
1770 pieces->init_data = src;
1771 src += pieces->init_data_size;
1773 src += pieces->boot_size;
1778 static int iwlagn_wanted_ucode_alternative = 1;
1780 static int iwlagn_load_firmware(struct iwl_priv *priv,
1781 const struct firmware *ucode_raw,
1782 struct iwlagn_firmware_pieces *pieces,
1783 struct iwlagn_ucode_capabilities *capa)
1785 struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data;
1786 struct iwl_ucode_tlv *tlv;
1787 size_t len = ucode_raw->size;
1789 int wanted_alternative = iwlagn_wanted_ucode_alternative, tmp;
1792 enum iwl_ucode_tlv_type tlv_type;
1795 if (len < sizeof(*ucode)) {
1796 IWL_ERR(priv, "uCode has invalid length: %zd\n", len);
1800 if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) {
1801 IWL_ERR(priv, "invalid uCode magic: 0X%x\n",
1802 le32_to_cpu(ucode->magic));
1807 * Check which alternatives are present, and "downgrade"
1808 * when the chosen alternative is not present, warning
1809 * the user when that happens. Some files may not have
1810 * any alternatives, so don't warn in that case.
1812 alternatives = le64_to_cpu(ucode->alternatives);
1813 tmp = wanted_alternative;
1814 if (wanted_alternative > 63)
1815 wanted_alternative = 63;
1816 while (wanted_alternative && !(alternatives & BIT(wanted_alternative)))
1817 wanted_alternative--;
1818 if (wanted_alternative && wanted_alternative != tmp)
1820 "uCode alternative %d not available, choosing %d\n",
1821 tmp, wanted_alternative);
1823 priv->ucode_ver = le32_to_cpu(ucode->ver);
1824 pieces->build = le32_to_cpu(ucode->build);
1827 len -= sizeof(*ucode);
1829 while (len >= sizeof(*tlv)) {
1832 len -= sizeof(*tlv);
1835 tlv_len = le32_to_cpu(tlv->length);
1836 tlv_type = le16_to_cpu(tlv->type);
1837 tlv_alt = le16_to_cpu(tlv->alternative);
1838 tlv_data = tlv->data;
1840 if (len < tlv_len) {
1841 IWL_ERR(priv, "invalid TLV len: %zd/%u\n",
1845 len -= ALIGN(tlv_len, 4);
1846 data += sizeof(*tlv) + ALIGN(tlv_len, 4);
1849 * Alternative 0 is always valid.
1851 * Skip alternative TLVs that are not selected.
1853 if (tlv_alt != 0 && tlv_alt != wanted_alternative)
1857 case IWL_UCODE_TLV_INST:
1858 pieces->inst = tlv_data;
1859 pieces->inst_size = tlv_len;
1861 case IWL_UCODE_TLV_DATA:
1862 pieces->data = tlv_data;
1863 pieces->data_size = tlv_len;
1865 case IWL_UCODE_TLV_INIT:
1866 pieces->init = tlv_data;
1867 pieces->init_size = tlv_len;
1869 case IWL_UCODE_TLV_INIT_DATA:
1870 pieces->init_data = tlv_data;
1871 pieces->init_data_size = tlv_len;
1873 case IWL_UCODE_TLV_BOOT:
1874 pieces->boot = tlv_data;
1875 pieces->boot_size = tlv_len;
1877 case IWL_UCODE_TLV_PROBE_MAX_LEN:
1878 if (tlv_len != sizeof(u32))
1879 goto invalid_tlv_len;
1880 capa->max_probe_length =
1881 le32_to_cpup((__le32 *)tlv_data);
1883 case IWL_UCODE_TLV_INIT_EVTLOG_PTR:
1884 if (tlv_len != sizeof(u32))
1885 goto invalid_tlv_len;
1886 pieces->init_evtlog_ptr =
1887 le32_to_cpup((__le32 *)tlv_data);
1889 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE:
1890 if (tlv_len != sizeof(u32))
1891 goto invalid_tlv_len;
1892 pieces->init_evtlog_size =
1893 le32_to_cpup((__le32 *)tlv_data);
1895 case IWL_UCODE_TLV_INIT_ERRLOG_PTR:
1896 if (tlv_len != sizeof(u32))
1897 goto invalid_tlv_len;
1898 pieces->init_errlog_ptr =
1899 le32_to_cpup((__le32 *)tlv_data);
1901 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR:
1902 if (tlv_len != sizeof(u32))
1903 goto invalid_tlv_len;
1904 pieces->inst_evtlog_ptr =
1905 le32_to_cpup((__le32 *)tlv_data);
1907 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE:
1908 if (tlv_len != sizeof(u32))
1909 goto invalid_tlv_len;
1910 pieces->inst_evtlog_size =
1911 le32_to_cpup((__le32 *)tlv_data);
1913 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR:
1914 if (tlv_len != sizeof(u32))
1915 goto invalid_tlv_len;
1916 pieces->inst_errlog_ptr =
1917 le32_to_cpup((__le32 *)tlv_data);
1919 case IWL_UCODE_TLV_ENHANCE_SENS_TBL:
1921 goto invalid_tlv_len;
1922 priv->enhance_sensitivity_table = true;
1924 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE:
1925 if (tlv_len != sizeof(u32))
1926 goto invalid_tlv_len;
1927 capa->standard_phy_calibration_size =
1928 le32_to_cpup((__le32 *)tlv_data);
1931 IWL_WARN(priv, "unknown TLV: %d\n", tlv_type);
1937 IWL_ERR(priv, "invalid TLV after parsing: %zd\n", len);
1938 iwl_print_hex_dump(priv, IWL_DL_FW, (u8 *)data, len);
1945 IWL_ERR(priv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len);
1946 iwl_print_hex_dump(priv, IWL_DL_FW, tlv_data, tlv_len);
1952 * iwl_ucode_callback - callback when firmware was loaded
1954 * If loaded successfully, copies the firmware into buffers
1955 * for the card to fetch (via DMA).
1957 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
1959 struct iwl_priv *priv = context;
1960 struct iwl_ucode_header *ucode;
1962 struct iwlagn_firmware_pieces pieces;
1963 const unsigned int api_max = priv->cfg->ucode_api_max;
1964 const unsigned int api_min = priv->cfg->ucode_api_min;
1968 struct iwlagn_ucode_capabilities ucode_capa = {
1969 .max_probe_length = 200,
1970 .standard_phy_calibration_size =
1971 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE,
1974 memset(&pieces, 0, sizeof(pieces));
1977 IWL_ERR(priv, "request for firmware file '%s' failed.\n",
1978 priv->firmware_name);
1982 IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
1983 priv->firmware_name, ucode_raw->size);
1985 /* Make sure that we got at least the API version number */
1986 if (ucode_raw->size < 4) {
1987 IWL_ERR(priv, "File size way too small!\n");
1991 /* Data from ucode file: header followed by uCode images */
1992 ucode = (struct iwl_ucode_header *)ucode_raw->data;
1995 err = iwlagn_load_legacy_firmware(priv, ucode_raw, &pieces);
1997 err = iwlagn_load_firmware(priv, ucode_raw, &pieces,
2003 api_ver = IWL_UCODE_API(priv->ucode_ver);
2004 build = pieces.build;
2007 * api_ver should match the api version forming part of the
2008 * firmware filename ... but we don't check for that and only rely
2009 * on the API version read from firmware header from here on forward
2011 if (api_ver < api_min || api_ver > api_max) {
2012 IWL_ERR(priv, "Driver unable to support your firmware API. "
2013 "Driver supports v%u, firmware is v%u.\n",
2018 if (api_ver != api_max)
2019 IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
2020 "got v%u. New firmware can be obtained "
2021 "from http://www.intellinuxwireless.org.\n",
2025 sprintf(buildstr, " build %u", build);
2029 IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n",
2030 IWL_UCODE_MAJOR(priv->ucode_ver),
2031 IWL_UCODE_MINOR(priv->ucode_ver),
2032 IWL_UCODE_API(priv->ucode_ver),
2033 IWL_UCODE_SERIAL(priv->ucode_ver),
2036 snprintf(priv->hw->wiphy->fw_version,
2037 sizeof(priv->hw->wiphy->fw_version),
2039 IWL_UCODE_MAJOR(priv->ucode_ver),
2040 IWL_UCODE_MINOR(priv->ucode_ver),
2041 IWL_UCODE_API(priv->ucode_ver),
2042 IWL_UCODE_SERIAL(priv->ucode_ver),
2046 * For any of the failures below (before allocating pci memory)
2047 * we will try to load a version with a smaller API -- maybe the
2048 * user just got a corrupted version of the latest API.
2051 IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
2053 IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n",
2055 IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n",
2057 IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n",
2059 IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n",
2060 pieces.init_data_size);
2061 IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %Zd\n",
2064 /* Verify that uCode images will fit in card's SRAM */
2065 if (pieces.inst_size > priv->hw_params.max_inst_size) {
2066 IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n",
2071 if (pieces.data_size > priv->hw_params.max_data_size) {
2072 IWL_ERR(priv, "uCode data len %Zd too large to fit in\n",
2077 if (pieces.init_size > priv->hw_params.max_inst_size) {
2078 IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n",
2083 if (pieces.init_data_size > priv->hw_params.max_data_size) {
2084 IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n",
2085 pieces.init_data_size);
2089 if (pieces.boot_size > priv->hw_params.max_bsm_size) {
2090 IWL_ERR(priv, "uCode boot instr len %Zd too large to fit in\n",
2095 /* Allocate ucode buffers for card's bus-master loading ... */
2097 /* Runtime instructions and 2 copies of data:
2098 * 1) unmodified from disk
2099 * 2) backup cache for save/restore during power-downs */
2100 priv->ucode_code.len = pieces.inst_size;
2101 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
2103 priv->ucode_data.len = pieces.data_size;
2104 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
2106 priv->ucode_data_backup.len = pieces.data_size;
2107 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
2109 if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
2110 !priv->ucode_data_backup.v_addr)
2113 /* Initialization instructions and data */
2114 if (pieces.init_size && pieces.init_data_size) {
2115 priv->ucode_init.len = pieces.init_size;
2116 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
2118 priv->ucode_init_data.len = pieces.init_data_size;
2119 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
2121 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
2125 /* Bootstrap (instructions only, no data) */
2126 if (pieces.boot_size) {
2127 priv->ucode_boot.len = pieces.boot_size;
2128 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
2130 if (!priv->ucode_boot.v_addr)
2134 /* Now that we can no longer fail, copy information */
2137 * The (size - 16) / 12 formula is based on the information recorded
2138 * for each event, which is of mode 1 (including timestamp) for all
2139 * new microcodes that include this information.
2141 priv->_agn.init_evtlog_ptr = pieces.init_evtlog_ptr;
2142 if (pieces.init_evtlog_size)
2143 priv->_agn.init_evtlog_size = (pieces.init_evtlog_size - 16)/12;
2145 priv->_agn.init_evtlog_size = priv->cfg->max_event_log_size;
2146 priv->_agn.init_errlog_ptr = pieces.init_errlog_ptr;
2147 priv->_agn.inst_evtlog_ptr = pieces.inst_evtlog_ptr;
2148 if (pieces.inst_evtlog_size)
2149 priv->_agn.inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12;
2151 priv->_agn.inst_evtlog_size = priv->cfg->max_event_log_size;
2152 priv->_agn.inst_errlog_ptr = pieces.inst_errlog_ptr;
2154 /* Copy images into buffers for card's bus-master reads ... */
2156 /* Runtime instructions (first block of data in file) */
2157 IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n",
2159 memcpy(priv->ucode_code.v_addr, pieces.inst, pieces.inst_size);
2161 IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2162 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
2166 * NOTE: Copy into backup buffer will be done in iwl_up()
2168 IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n",
2170 memcpy(priv->ucode_data.v_addr, pieces.data, pieces.data_size);
2171 memcpy(priv->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
2173 /* Initialization instructions */
2174 if (pieces.init_size) {
2175 IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
2177 memcpy(priv->ucode_init.v_addr, pieces.init, pieces.init_size);
2180 /* Initialization data */
2181 if (pieces.init_data_size) {
2182 IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
2183 pieces.init_data_size);
2184 memcpy(priv->ucode_init_data.v_addr, pieces.init_data,
2185 pieces.init_data_size);
2188 /* Bootstrap instructions */
2189 IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n",
2191 memcpy(priv->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
2194 * figure out the offset of chain noise reset and gain commands
2195 * base on the size of standard phy calibration commands table size
2197 if (ucode_capa.standard_phy_calibration_size >
2198 IWL_MAX_PHY_CALIBRATE_TBL_SIZE)
2199 ucode_capa.standard_phy_calibration_size =
2200 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
2202 priv->_agn.phy_calib_chain_noise_reset_cmd =
2203 ucode_capa.standard_phy_calibration_size;
2204 priv->_agn.phy_calib_chain_noise_gain_cmd =
2205 ucode_capa.standard_phy_calibration_size + 1;
2207 /**************************************************
2208 * This is still part of probe() in a sense...
2210 * 9. Setup and register with mac80211 and debugfs
2211 **************************************************/
2212 err = iwl_mac_setup_register(priv, &ucode_capa);
2216 err = iwl_dbgfs_register(priv, DRV_NAME);
2218 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
2220 err = sysfs_create_group(&priv->pci_dev->dev.kobj,
2221 &iwl_attribute_group);
2223 IWL_ERR(priv, "failed to create sysfs device attributes\n");
2227 /* We have our copies now, allow OS release its copies */
2228 release_firmware(ucode_raw);
2229 complete(&priv->_agn.firmware_loading_complete);
2233 /* try next, if any */
2234 if (iwl_request_firmware(priv, false))
2236 release_firmware(ucode_raw);
2240 IWL_ERR(priv, "failed to allocate pci memory\n");
2241 iwl_dealloc_ucode_pci(priv);
2243 complete(&priv->_agn.firmware_loading_complete);
2244 device_release_driver(&priv->pci_dev->dev);
2245 release_firmware(ucode_raw);
2248 static const char *desc_lookup_text[] = {
2253 "NMI_INTERRUPT_WDG",
2257 "HW_ERROR_TUNE_LOCK",
2258 "HW_ERROR_TEMPERATURE",
2259 "ILLEGAL_CHAN_FREQ",
2262 "NMI_INTERRUPT_HOST",
2263 "NMI_INTERRUPT_ACTION_PT",
2264 "NMI_INTERRUPT_UNKNOWN",
2265 "UCODE_VERSION_MISMATCH",
2266 "HW_ERROR_ABS_LOCK",
2267 "HW_ERROR_CAL_LOCK_FAIL",
2268 "NMI_INTERRUPT_INST_ACTION_PT",
2269 "NMI_INTERRUPT_DATA_ACTION_PT",
2271 "NMI_INTERRUPT_TRM",
2272 "NMI_INTERRUPT_BREAK_POINT"
2279 static struct { char *name; u8 num; } advanced_lookup[] = {
2280 { "NMI_INTERRUPT_WDG", 0x34 },
2281 { "SYSASSERT", 0x35 },
2282 { "UCODE_VERSION_MISMATCH", 0x37 },
2283 { "BAD_COMMAND", 0x38 },
2284 { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
2285 { "FATAL_ERROR", 0x3D },
2286 { "NMI_TRM_HW_ERR", 0x46 },
2287 { "NMI_INTERRUPT_TRM", 0x4C },
2288 { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
2289 { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
2290 { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
2291 { "NMI_INTERRUPT_HOST", 0x66 },
2292 { "NMI_INTERRUPT_ACTION_PT", 0x7C },
2293 { "NMI_INTERRUPT_UNKNOWN", 0x84 },
2294 { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
2295 { "ADVANCED_SYSASSERT", 0 },
2298 static const char *desc_lookup(u32 num)
2301 int max = ARRAY_SIZE(desc_lookup_text);
2304 return desc_lookup_text[num];
2306 max = ARRAY_SIZE(advanced_lookup) - 1;
2307 for (i = 0; i < max; i++) {
2308 if (advanced_lookup[i].num == num)
2311 return advanced_lookup[i].name;
2314 #define ERROR_START_OFFSET (1 * sizeof(u32))
2315 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
2317 void iwl_dump_nic_error_log(struct iwl_priv *priv)
2320 u32 desc, time, count, base, data1;
2321 u32 blink1, blink2, ilink1, ilink2;
2324 if (priv->ucode_type == UCODE_INIT) {
2325 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
2327 base = priv->_agn.init_errlog_ptr;
2329 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
2331 base = priv->_agn.inst_errlog_ptr;
2334 if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
2336 "Not valid error log pointer 0x%08X for %s uCode\n",
2337 base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
2341 count = iwl_read_targ_mem(priv, base);
2343 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
2344 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
2345 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
2346 priv->status, count);
2349 desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
2350 pc = iwl_read_targ_mem(priv, base + 2 * sizeof(u32));
2351 blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
2352 blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
2353 ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
2354 ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
2355 data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
2356 data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
2357 line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
2358 time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
2359 hcmd = iwl_read_targ_mem(priv, base + 22 * sizeof(u32));
2361 trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
2362 blink1, blink2, ilink1, ilink2);
2364 IWL_ERR(priv, "Desc Time "
2365 "data1 data2 line\n");
2366 IWL_ERR(priv, "%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
2367 desc_lookup(desc), desc, time, data1, data2, line);
2368 IWL_ERR(priv, "pc blink1 blink2 ilink1 ilink2 hcmd\n");
2369 IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n",
2370 pc, blink1, blink2, ilink1, ilink2, hcmd);
2373 #define EVENT_START_OFFSET (4 * sizeof(u32))
2376 * iwl_print_event_log - Dump error event log to syslog
2379 static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
2380 u32 num_events, u32 mode,
2381 int pos, char **buf, size_t bufsz)
2384 u32 base; /* SRAM byte address of event log header */
2385 u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
2386 u32 ptr; /* SRAM byte address of log data */
2387 u32 ev, time, data; /* event log data */
2388 unsigned long reg_flags;
2390 if (num_events == 0)
2393 if (priv->ucode_type == UCODE_INIT) {
2394 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
2396 base = priv->_agn.init_evtlog_ptr;
2398 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
2400 base = priv->_agn.inst_evtlog_ptr;
2404 event_size = 2 * sizeof(u32);
2406 event_size = 3 * sizeof(u32);
2408 ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
2410 /* Make sure device is powered up for SRAM reads */
2411 spin_lock_irqsave(&priv->reg_lock, reg_flags);
2412 iwl_grab_nic_access(priv);
2414 /* Set starting address; reads will auto-increment */
2415 _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
2418 /* "time" is actually "data" for mode 0 (no timestamp).
2419 * place event id # at far right for easier visual parsing. */
2420 for (i = 0; i < num_events; i++) {
2421 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
2422 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
2426 pos += scnprintf(*buf + pos, bufsz - pos,
2427 "EVT_LOG:0x%08x:%04u\n",
2430 trace_iwlwifi_dev_ucode_event(priv, 0,
2432 IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
2436 data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
2438 pos += scnprintf(*buf + pos, bufsz - pos,
2439 "EVT_LOGT:%010u:0x%08x:%04u\n",
2442 IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
2444 trace_iwlwifi_dev_ucode_event(priv, time,
2450 /* Allow device to power down */
2451 iwl_release_nic_access(priv);
2452 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
2457 * iwl_print_last_event_logs - Dump the newest # of event log to syslog
2459 static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
2460 u32 num_wraps, u32 next_entry,
2462 int pos, char **buf, size_t bufsz)
2465 * display the newest DEFAULT_LOG_ENTRIES entries
2466 * i.e the entries just before the next ont that uCode would fill.
2469 if (next_entry < size) {
2470 pos = iwl_print_event_log(priv,
2471 capacity - (size - next_entry),
2472 size - next_entry, mode,
2474 pos = iwl_print_event_log(priv, 0,
2478 pos = iwl_print_event_log(priv, next_entry - size,
2479 size, mode, pos, buf, bufsz);
2481 if (next_entry < size) {
2482 pos = iwl_print_event_log(priv, 0, next_entry,
2483 mode, pos, buf, bufsz);
2485 pos = iwl_print_event_log(priv, next_entry - size,
2486 size, mode, pos, buf, bufsz);
2492 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
2494 int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
2495 char **buf, bool display)
2497 u32 base; /* SRAM byte address of event log header */
2498 u32 capacity; /* event log capacity in # entries */
2499 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
2500 u32 num_wraps; /* # times uCode wrapped to top of log */
2501 u32 next_entry; /* index of next entry to be written by uCode */
2502 u32 size; /* # entries that we'll print */
2507 if (priv->ucode_type == UCODE_INIT) {
2508 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
2509 logsize = priv->_agn.init_evtlog_size;
2511 base = priv->_agn.init_evtlog_ptr;
2513 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
2514 logsize = priv->_agn.inst_evtlog_size;
2516 base = priv->_agn.inst_evtlog_ptr;
2519 if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
2521 "Invalid event log pointer 0x%08X for %s uCode\n",
2522 base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
2526 /* event log header */
2527 capacity = iwl_read_targ_mem(priv, base);
2528 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
2529 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
2530 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
2532 if (capacity > logsize) {
2533 IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
2538 if (next_entry > logsize) {
2539 IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
2540 next_entry, logsize);
2541 next_entry = logsize;
2544 size = num_wraps ? capacity : next_entry;
2546 /* bail out if nothing in log */
2548 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
2552 #ifdef CONFIG_IWLWIFI_DEBUG
2553 if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
2554 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
2555 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2557 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
2558 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2560 IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
2563 #ifdef CONFIG_IWLWIFI_DEBUG
2566 bufsz = capacity * 48;
2569 *buf = kmalloc(bufsz, GFP_KERNEL);
2573 if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
2575 * if uCode has wrapped back to top of log,
2576 * start at the oldest entry,
2577 * i.e the next one that uCode would fill.
2580 pos = iwl_print_event_log(priv, next_entry,
2581 capacity - next_entry, mode,
2583 /* (then/else) start at top of log */
2584 pos = iwl_print_event_log(priv, 0,
2585 next_entry, mode, pos, buf, bufsz);
2587 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2588 next_entry, size, mode,
2591 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2592 next_entry, size, mode,
2599 * iwl_alive_start - called after REPLY_ALIVE notification received
2600 * from protocol/runtime uCode (initialization uCode's
2601 * Alive gets handled by iwl_init_alive_start()).
2603 static void iwl_alive_start(struct iwl_priv *priv)
2607 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
2609 if (priv->card_alive.is_valid != UCODE_VALID_OK) {
2610 /* We had an error bringing up the hardware, so take it
2611 * all the way back down so we can try again */
2612 IWL_DEBUG_INFO(priv, "Alive failed.\n");
2616 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2617 * This is a paranoid check, because we would not have gotten the
2618 * "runtime" alive if code weren't properly loaded. */
2619 if (iwl_verify_ucode(priv)) {
2620 /* Runtime instruction load was bad;
2621 * take it all the way back down so we can try again */
2622 IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
2626 ret = priv->cfg->ops->lib->alive_notify(priv);
2629 "Could not complete ALIVE transition [ntf]: %d\n", ret);
2633 /* After the ALIVE response, we can send host commands to the uCode */
2634 set_bit(STATUS_ALIVE, &priv->status);
2636 if (priv->cfg->ops->lib->recover_from_tx_stall) {
2637 /* Enable timer to monitor the driver queues */
2638 mod_timer(&priv->monitor_recover,
2640 msecs_to_jiffies(priv->cfg->monitor_recover_period));
2643 if (iwl_is_rfkill(priv))
2646 ieee80211_wake_queues(priv->hw);
2648 priv->active_rate = IWL_RATES_MASK;
2650 /* Configure Tx antenna selection based on H/W config */
2651 if (priv->cfg->ops->hcmd->set_tx_ant)
2652 priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
2654 if (iwl_is_associated(priv)) {
2655 struct iwl_rxon_cmd *active_rxon =
2656 (struct iwl_rxon_cmd *)&priv->active_rxon;
2657 /* apply any changes in staging */
2658 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2659 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2661 /* Initialize our rx_config data */
2662 iwl_connection_init_rx_config(priv, NULL);
2664 if (priv->cfg->ops->hcmd->set_rxon_chain)
2665 priv->cfg->ops->hcmd->set_rxon_chain(priv);
2668 /* Configure Bluetooth device coexistence support */
2669 priv->cfg->ops->hcmd->send_bt_config(priv);
2671 iwl_reset_run_time_calib(priv);
2673 /* Configure the adapter for unassociated operation */
2674 iwlcore_commit_rxon(priv);
2676 /* At this point, the NIC is initialized and operational */
2677 iwl_rf_kill_ct_config(priv);
2679 iwl_leds_init(priv);
2681 IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
2682 set_bit(STATUS_READY, &priv->status);
2683 wake_up_interruptible(&priv->wait_command_queue);
2685 iwl_power_update_mode(priv, true);
2686 IWL_DEBUG_INFO(priv, "Updated power mode\n");
2692 queue_work(priv->workqueue, &priv->restart);
2695 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
2697 static void __iwl_down(struct iwl_priv *priv)
2699 unsigned long flags;
2700 int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
2702 IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
2705 set_bit(STATUS_EXIT_PENDING, &priv->status);
2707 iwl_clear_ucode_stations(priv);
2708 iwl_dealloc_bcast_station(priv);
2709 iwl_clear_driver_stations(priv);
2711 /* Unblock any waiting calls */
2712 wake_up_interruptible_all(&priv->wait_command_queue);
2714 /* Wipe out the EXIT_PENDING status bit if we are not actually
2715 * exiting the module */
2717 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2719 /* stop and reset the on-board processor */
2720 iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2722 /* tell the device to stop sending interrupts */
2723 spin_lock_irqsave(&priv->lock, flags);
2724 iwl_disable_interrupts(priv);
2725 spin_unlock_irqrestore(&priv->lock, flags);
2726 iwl_synchronize_irq(priv);
2728 if (priv->mac80211_registered)
2729 ieee80211_stop_queues(priv->hw);
2731 /* If we have not previously called iwl_init() then
2732 * clear all bits but the RF Kill bit and return */
2733 if (!iwl_is_init(priv)) {
2734 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2736 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2737 STATUS_GEO_CONFIGURED |
2738 test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2739 STATUS_EXIT_PENDING;
2743 /* ...otherwise clear out all the status bits but the RF Kill
2744 * bit and continue taking the NIC down. */
2745 priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2747 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2748 STATUS_GEO_CONFIGURED |
2749 test_bit(STATUS_FW_ERROR, &priv->status) <<
2751 test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2752 STATUS_EXIT_PENDING;
2754 /* device going down, Stop using ICT table */
2755 iwl_disable_ict(priv);
2757 iwlagn_txq_ctx_stop(priv);
2758 iwlagn_rxq_stop(priv);
2760 /* Power-down device's busmaster DMA clocks */
2761 iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2764 /* Make sure (redundant) we've released our request to stay awake */
2765 iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
2767 /* Stop the device, and put it in low power state */
2768 priv->cfg->ops->lib->apm_ops.stop(priv);
2771 memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
2773 if (priv->ibss_beacon)
2774 dev_kfree_skb(priv->ibss_beacon);
2775 priv->ibss_beacon = NULL;
2777 /* clear out any free frames */
2778 iwl_clear_free_frames(priv);
2781 static void iwl_down(struct iwl_priv *priv)
2783 mutex_lock(&priv->mutex);
2785 mutex_unlock(&priv->mutex);
2787 iwl_cancel_deferred_work(priv);
2790 #define HW_READY_TIMEOUT (50)
2792 static int iwl_set_hw_ready(struct iwl_priv *priv)
2796 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2797 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
2799 /* See if we got it */
2800 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2801 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2802 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2804 if (ret != -ETIMEDOUT)
2805 priv->hw_ready = true;
2807 priv->hw_ready = false;
2809 IWL_DEBUG_INFO(priv, "hardware %s\n",
2810 (priv->hw_ready == 1) ? "ready" : "not ready");
2814 static int iwl_prepare_card_hw(struct iwl_priv *priv)
2818 IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
2820 ret = iwl_set_hw_ready(priv);
2824 /* If HW is not ready, prepare the conditions to check again */
2825 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2826 CSR_HW_IF_CONFIG_REG_PREPARE);
2828 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2829 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
2830 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
2832 /* HW should be ready by now, check again. */
2833 if (ret != -ETIMEDOUT)
2834 iwl_set_hw_ready(priv);
2839 #define MAX_HW_RESTARTS 5
2841 static int __iwl_up(struct iwl_priv *priv)
2846 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
2847 IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
2851 if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
2852 IWL_ERR(priv, "ucode not available for device bringup\n");
2856 ret = iwl_alloc_bcast_station(priv, true);
2860 iwl_prepare_card_hw(priv);
2862 if (!priv->hw_ready) {
2863 IWL_WARN(priv, "Exit HW not ready\n");
2867 /* If platform's RF_KILL switch is NOT set to KILL */
2868 if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2869 clear_bit(STATUS_RF_KILL_HW, &priv->status);
2871 set_bit(STATUS_RF_KILL_HW, &priv->status);
2873 if (iwl_is_rfkill(priv)) {
2874 wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
2876 iwl_enable_interrupts(priv);
2877 IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
2881 iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2883 ret = iwlagn_hw_nic_init(priv);
2885 IWL_ERR(priv, "Unable to init nic\n");
2889 /* make sure rfkill handshake bits are cleared */
2890 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2891 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
2892 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2894 /* clear (again), then enable host interrupts */
2895 iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2896 iwl_enable_interrupts(priv);
2898 /* really make sure rfkill handshake bits are cleared */
2899 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2900 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2902 /* Copy original ucode data image from disk into backup cache.
2903 * This will be used to initialize the on-board processor's
2904 * data SRAM for a clean start when the runtime program first loads. */
2905 memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
2906 priv->ucode_data.len);
2908 for (i = 0; i < MAX_HW_RESTARTS; i++) {
2910 /* load bootstrap state machine,
2911 * load bootstrap program into processor's memory,
2912 * prepare to load the "initialize" uCode */
2913 ret = priv->cfg->ops->lib->load_ucode(priv);
2916 IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
2921 /* start card; "initialize" will load runtime ucode */
2922 iwl_nic_start(priv);
2924 IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
2929 set_bit(STATUS_EXIT_PENDING, &priv->status);
2931 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2933 /* tried to restart and config the device for as long as our
2934 * patience could withstand */
2935 IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
2940 /*****************************************************************************
2942 * Workqueue callbacks
2944 *****************************************************************************/
2946 static void iwl_bg_init_alive_start(struct work_struct *data)
2948 struct iwl_priv *priv =
2949 container_of(data, struct iwl_priv, init_alive_start.work);
2951 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2954 mutex_lock(&priv->mutex);
2955 priv->cfg->ops->lib->init_alive_start(priv);
2956 mutex_unlock(&priv->mutex);
2959 static void iwl_bg_alive_start(struct work_struct *data)
2961 struct iwl_priv *priv =
2962 container_of(data, struct iwl_priv, alive_start.work);
2964 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2967 /* enable dram interrupt */
2968 iwl_reset_ict(priv);
2970 mutex_lock(&priv->mutex);
2971 iwl_alive_start(priv);
2972 mutex_unlock(&priv->mutex);
2975 static void iwl_bg_run_time_calib_work(struct work_struct *work)
2977 struct iwl_priv *priv = container_of(work, struct iwl_priv,
2978 run_time_calib_work);
2980 mutex_lock(&priv->mutex);
2982 if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2983 test_bit(STATUS_SCANNING, &priv->status)) {
2984 mutex_unlock(&priv->mutex);
2988 if (priv->start_calib) {
2989 if (priv->cfg->bt_statistics) {
2990 iwl_chain_noise_calibration(priv,
2991 (void *)&priv->_agn.statistics_bt);
2992 iwl_sensitivity_calibration(priv,
2993 (void *)&priv->_agn.statistics_bt);
2995 iwl_chain_noise_calibration(priv,
2996 (void *)&priv->_agn.statistics);
2997 iwl_sensitivity_calibration(priv,
2998 (void *)&priv->_agn.statistics);
3002 mutex_unlock(&priv->mutex);
3005 static void iwl_bg_restart(struct work_struct *data)
3007 struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
3009 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
3012 if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
3013 mutex_lock(&priv->mutex);
3016 mutex_unlock(&priv->mutex);
3018 ieee80211_restart_hw(priv->hw);
3022 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
3025 mutex_lock(&priv->mutex);
3027 mutex_unlock(&priv->mutex);
3031 static void iwl_bg_rx_replenish(struct work_struct *data)
3033 struct iwl_priv *priv =
3034 container_of(data, struct iwl_priv, rx_replenish);
3036 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
3039 mutex_lock(&priv->mutex);
3040 iwlagn_rx_replenish(priv);
3041 mutex_unlock(&priv->mutex);
3044 #define IWL_DELAY_NEXT_SCAN (HZ*2)
3046 void iwl_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif)
3048 struct ieee80211_conf *conf = NULL;
3051 if (!vif || !priv->is_open)
3054 if (vif->type == NL80211_IFTYPE_AP) {
3055 IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
3059 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
3062 iwl_scan_cancel_timeout(priv, 200);
3064 conf = ieee80211_get_hw_conf(priv->hw);
3066 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
3067 iwlcore_commit_rxon(priv);
3069 iwl_setup_rxon_timing(priv, vif);
3070 ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
3071 sizeof(priv->rxon_timing), &priv->rxon_timing);
3073 IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
3074 "Attempting to continue.\n");
3076 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
3078 iwl_set_rxon_ht(priv, &priv->current_ht_config);
3080 if (priv->cfg->ops->hcmd->set_rxon_chain)
3081 priv->cfg->ops->hcmd->set_rxon_chain(priv);
3083 priv->staging_rxon.assoc_id = cpu_to_le16(vif->bss_conf.aid);
3085 IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
3086 vif->bss_conf.aid, vif->bss_conf.beacon_int);
3088 if (vif->bss_conf.use_short_preamble)
3089 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
3091 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
3093 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
3094 if (vif->bss_conf.use_short_slot)
3095 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
3097 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
3100 iwlcore_commit_rxon(priv);
3102 IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
3103 vif->bss_conf.aid, priv->active_rxon.bssid_addr);
3105 switch (vif->type) {
3106 case NL80211_IFTYPE_STATION:
3108 case NL80211_IFTYPE_ADHOC:
3109 iwl_send_beacon_cmd(priv);
3112 IWL_ERR(priv, "%s Should not be called in %d mode\n",
3113 __func__, vif->type);
3117 /* the chain noise calibration will enabled PM upon completion
3118 * If chain noise has already been run, then we need to enable
3119 * power management here */
3120 if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
3121 iwl_power_update_mode(priv, false);
3123 /* Enable Rx differential gain and sensitivity calibrations */
3124 iwl_chain_noise_reset(priv);
3125 priv->start_calib = 1;
3129 /*****************************************************************************
3131 * mac80211 entry point functions
3133 *****************************************************************************/
3135 #define UCODE_READY_TIMEOUT (4 * HZ)
3138 * Not a mac80211 entry point function, but it fits in with all the
3139 * other mac80211 functions grouped here.
3141 static int iwl_mac_setup_register(struct iwl_priv *priv,
3142 struct iwlagn_ucode_capabilities *capa)
3145 struct ieee80211_hw *hw = priv->hw;
3146 hw->rate_control_algorithm = "iwl-agn-rs";
3148 /* Tell mac80211 our characteristics */
3149 hw->flags = IEEE80211_HW_SIGNAL_DBM |
3150 IEEE80211_HW_AMPDU_AGGREGATION |
3151 IEEE80211_HW_SPECTRUM_MGMT;
3153 if (!priv->cfg->broken_powersave)
3154 hw->flags |= IEEE80211_HW_SUPPORTS_PS |
3155 IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
3157 if (priv->cfg->sku & IWL_SKU_N)
3158 hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
3159 IEEE80211_HW_SUPPORTS_STATIC_SMPS;
3161 hw->sta_data_size = sizeof(struct iwl_station_priv);
3162 hw->vif_data_size = sizeof(struct iwl_vif_priv);
3164 hw->wiphy->interface_modes =
3165 BIT(NL80211_IFTYPE_STATION) |
3166 BIT(NL80211_IFTYPE_ADHOC);
3168 hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
3169 WIPHY_FLAG_DISABLE_BEACON_HINTS;
3172 * For now, disable PS by default because it affects
3173 * RX performance significantly.
3175 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
3177 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
3178 /* we create the 802.11 header and a zero-length SSID element */
3179 hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 2;
3181 /* Default value; 4 EDCA QOS priorities */
3184 hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
3186 if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
3187 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
3188 &priv->bands[IEEE80211_BAND_2GHZ];
3189 if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
3190 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
3191 &priv->bands[IEEE80211_BAND_5GHZ];
3193 ret = ieee80211_register_hw(priv->hw);
3195 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
3198 priv->mac80211_registered = 1;
3204 static int iwl_mac_start(struct ieee80211_hw *hw)
3206 struct iwl_priv *priv = hw->priv;
3209 IWL_DEBUG_MAC80211(priv, "enter\n");
3211 /* we should be verifying the device is ready to be opened */
3212 mutex_lock(&priv->mutex);
3213 ret = __iwl_up(priv);
3214 mutex_unlock(&priv->mutex);
3219 if (iwl_is_rfkill(priv))
3222 IWL_DEBUG_INFO(priv, "Start UP work done.\n");
3224 /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
3225 * mac80211 will not be run successfully. */
3226 ret = wait_event_interruptible_timeout(priv->wait_command_queue,
3227 test_bit(STATUS_READY, &priv->status),
3228 UCODE_READY_TIMEOUT);
3230 if (!test_bit(STATUS_READY, &priv->status)) {
3231 IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
3232 jiffies_to_msecs(UCODE_READY_TIMEOUT));
3237 iwl_led_start(priv);
3241 IWL_DEBUG_MAC80211(priv, "leave\n");
3245 static void iwl_mac_stop(struct ieee80211_hw *hw)
3247 struct iwl_priv *priv = hw->priv;
3249 IWL_DEBUG_MAC80211(priv, "enter\n");
3256 if (iwl_is_ready_rf(priv) || test_bit(STATUS_SCAN_HW, &priv->status)) {
3257 /* stop mac, cancel any scan request and clear
3258 * RXON_FILTER_ASSOC_MSK BIT
3260 mutex_lock(&priv->mutex);
3261 iwl_scan_cancel_timeout(priv, 100);
3262 mutex_unlock(&priv->mutex);
3267 flush_workqueue(priv->workqueue);
3269 /* User space software may expect getting rfkill changes
3270 * even if interface is down */
3271 iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
3272 iwl_enable_rfkill_int(priv);
3274 IWL_DEBUG_MAC80211(priv, "leave\n");
3277 static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
3279 struct iwl_priv *priv = hw->priv;
3281 IWL_DEBUG_MACDUMP(priv, "enter\n");
3283 IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
3284 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
3286 if (iwlagn_tx_skb(priv, skb))
3287 dev_kfree_skb_any(skb);
3289 IWL_DEBUG_MACDUMP(priv, "leave\n");
3290 return NETDEV_TX_OK;
3293 void iwl_config_ap(struct iwl_priv *priv, struct ieee80211_vif *vif)
3297 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
3300 /* The following should be done only at AP bring up */
3301 if (!iwl_is_associated(priv)) {
3303 /* RXON - unassoc (to set timing command) */
3304 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
3305 iwlcore_commit_rxon(priv);
3308 iwl_setup_rxon_timing(priv, vif);
3309 ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
3310 sizeof(priv->rxon_timing), &priv->rxon_timing);
3312 IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
3313 "Attempting to continue.\n");
3315 /* AP has all antennas */
3316 priv->chain_noise_data.active_chains =
3317 priv->hw_params.valid_rx_ant;
3318 iwl_set_rxon_ht(priv, &priv->current_ht_config);
3319 if (priv->cfg->ops->hcmd->set_rxon_chain)
3320 priv->cfg->ops->hcmd->set_rxon_chain(priv);
3322 priv->staging_rxon.assoc_id = 0;
3324 if (vif->bss_conf.use_short_preamble)
3325 priv->staging_rxon.flags |=
3326 RXON_FLG_SHORT_PREAMBLE_MSK;
3328 priv->staging_rxon.flags &=
3329 ~RXON_FLG_SHORT_PREAMBLE_MSK;
3331 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
3332 if (vif->bss_conf.use_short_slot)
3333 priv->staging_rxon.flags |=
3334 RXON_FLG_SHORT_SLOT_MSK;
3336 priv->staging_rxon.flags &=
3337 ~RXON_FLG_SHORT_SLOT_MSK;
3339 /* restore RXON assoc */
3340 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
3341 iwlcore_commit_rxon(priv);
3343 iwl_send_beacon_cmd(priv);
3345 /* FIXME - we need to add code here to detect a totally new
3346 * configuration, reset the AP, unassoc, rxon timing, assoc,
3347 * clear sta table, add BCAST sta... */
3350 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
3351 struct ieee80211_vif *vif,
3352 struct ieee80211_key_conf *keyconf,
3353 struct ieee80211_sta *sta,
3354 u32 iv32, u16 *phase1key)
3357 struct iwl_priv *priv = hw->priv;
3358 IWL_DEBUG_MAC80211(priv, "enter\n");
3360 iwl_update_tkip_key(priv, keyconf, sta,
3363 IWL_DEBUG_MAC80211(priv, "leave\n");
3366 static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
3367 struct ieee80211_vif *vif,
3368 struct ieee80211_sta *sta,
3369 struct ieee80211_key_conf *key)
3371 struct iwl_priv *priv = hw->priv;
3374 bool is_default_wep_key = false;
3376 IWL_DEBUG_MAC80211(priv, "enter\n");
3378 if (priv->cfg->mod_params->sw_crypto) {
3379 IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
3383 sta_id = iwl_sta_id_or_broadcast(priv, sta);
3384 if (sta_id == IWL_INVALID_STATION)
3387 mutex_lock(&priv->mutex);
3388 iwl_scan_cancel_timeout(priv, 100);
3391 * If we are getting WEP group key and we didn't receive any key mapping
3392 * so far, we are in legacy wep mode (group key only), otherwise we are
3394 * In legacy wep mode, we use another host command to the uCode.
3396 if (key->alg == ALG_WEP && !sta && vif->type != NL80211_IFTYPE_AP) {
3398 is_default_wep_key = !priv->key_mapping_key;
3400 is_default_wep_key =
3401 (key->hw_key_idx == HW_KEY_DEFAULT);
3406 if (is_default_wep_key)
3407 ret = iwl_set_default_wep_key(priv, key);
3409 ret = iwl_set_dynamic_key(priv, key, sta_id);
3411 IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
3414 if (is_default_wep_key)
3415 ret = iwl_remove_default_wep_key(priv, key);
3417 ret = iwl_remove_dynamic_key(priv, key, sta_id);
3419 IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
3425 mutex_unlock(&priv->mutex);
3426 IWL_DEBUG_MAC80211(priv, "leave\n");
3431 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
3432 struct ieee80211_vif *vif,
3433 enum ieee80211_ampdu_mlme_action action,
3434 struct ieee80211_sta *sta, u16 tid, u16 *ssn)
3436 struct iwl_priv *priv = hw->priv;
3439 IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
3442 if (!(priv->cfg->sku & IWL_SKU_N))
3445 mutex_lock(&priv->mutex);
3448 case IEEE80211_AMPDU_RX_START:
3449 IWL_DEBUG_HT(priv, "start Rx\n");
3450 ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
3452 case IEEE80211_AMPDU_RX_STOP:
3453 IWL_DEBUG_HT(priv, "stop Rx\n");
3454 ret = iwl_sta_rx_agg_stop(priv, sta, tid);
3455 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
3458 case IEEE80211_AMPDU_TX_START:
3459 IWL_DEBUG_HT(priv, "start Tx\n");
3460 ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
3462 priv->_agn.agg_tids_count++;
3463 IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
3464 priv->_agn.agg_tids_count);
3467 case IEEE80211_AMPDU_TX_STOP:
3468 IWL_DEBUG_HT(priv, "stop Tx\n");
3469 ret = iwlagn_tx_agg_stop(priv, vif, sta, tid);
3470 if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) {
3471 priv->_agn.agg_tids_count--;
3472 IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
3473 priv->_agn.agg_tids_count);
3475 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
3477 if (priv->cfg->use_rts_for_aggregation) {
3478 struct iwl_station_priv *sta_priv =
3479 (void *) sta->drv_priv;
3481 * switch off RTS/CTS if it was previously enabled
3484 sta_priv->lq_sta.lq.general_params.flags &=
3485 ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
3486 iwl_send_lq_cmd(priv, &sta_priv->lq_sta.lq,
3490 case IEEE80211_AMPDU_TX_OPERATIONAL:
3491 if (priv->cfg->use_rts_for_aggregation) {
3492 struct iwl_station_priv *sta_priv =
3493 (void *) sta->drv_priv;
3496 * switch to RTS/CTS if it is the prefer protection
3497 * method for HT traffic
3500 sta_priv->lq_sta.lq.general_params.flags |=
3501 LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
3502 iwl_send_lq_cmd(priv, &sta_priv->lq_sta.lq,
3508 mutex_unlock(&priv->mutex);
3513 static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
3514 struct ieee80211_vif *vif,
3515 enum sta_notify_cmd cmd,
3516 struct ieee80211_sta *sta)
3518 struct iwl_priv *priv = hw->priv;
3519 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
3523 case STA_NOTIFY_SLEEP:
3524 WARN_ON(!sta_priv->client);
3525 sta_priv->asleep = true;
3526 if (atomic_read(&sta_priv->pending_frames) > 0)
3527 ieee80211_sta_block_awake(hw, sta, true);
3529 case STA_NOTIFY_AWAKE:
3530 WARN_ON(!sta_priv->client);
3531 if (!sta_priv->asleep)
3533 sta_priv->asleep = false;
3534 sta_id = iwl_sta_id(sta);
3535 if (sta_id != IWL_INVALID_STATION)
3536 iwl_sta_modify_ps_wake(priv, sta_id);
3543 static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
3544 struct ieee80211_vif *vif,
3545 struct ieee80211_sta *sta)
3547 struct iwl_priv *priv = hw->priv;
3548 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
3549 bool is_ap = vif->type == NL80211_IFTYPE_STATION;
3553 IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
3555 mutex_lock(&priv->mutex);
3556 IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
3558 sta_priv->common.sta_id = IWL_INVALID_STATION;
3560 atomic_set(&sta_priv->pending_frames, 0);
3561 if (vif->type == NL80211_IFTYPE_AP)
3562 sta_priv->client = true;
3564 ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
3567 IWL_ERR(priv, "Unable to add station %pM (%d)\n",
3569 /* Should we return success if return code is EEXIST ? */
3570 mutex_unlock(&priv->mutex);
3574 sta_priv->common.sta_id = sta_id;
3576 /* Initialize rate scaling */
3577 IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
3579 iwl_rs_rate_init(priv, sta, sta_id);
3580 mutex_unlock(&priv->mutex);
3585 static void iwl_mac_channel_switch(struct ieee80211_hw *hw,
3586 struct ieee80211_channel_switch *ch_switch)
3588 struct iwl_priv *priv = hw->priv;
3589 const struct iwl_channel_info *ch_info;
3590 struct ieee80211_conf *conf = &hw->conf;
3591 struct iwl_ht_config *ht_conf = &priv->current_ht_config;
3593 unsigned long flags = 0;
3595 IWL_DEBUG_MAC80211(priv, "enter\n");
3597 if (iwl_is_rfkill(priv))
3600 if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
3601 test_bit(STATUS_SCANNING, &priv->status))
3604 if (!iwl_is_associated(priv))
3607 /* channel switch in progress */
3608 if (priv->switch_rxon.switch_in_progress == true)
3611 mutex_lock(&priv->mutex);
3612 if (priv->cfg->ops->lib->set_channel_switch) {
3614 ch = ieee80211_frequency_to_channel(
3615 ch_switch->channel->center_freq);
3616 if (le16_to_cpu(priv->active_rxon.channel) != ch) {
3617 ch_info = iwl_get_channel_info(priv,
3618 conf->channel->band,
3620 if (!is_channel_valid(ch_info)) {
3621 IWL_DEBUG_MAC80211(priv, "invalid channel\n");
3624 spin_lock_irqsave(&priv->lock, flags);
3626 priv->current_ht_config.smps = conf->smps_mode;
3628 /* Configure HT40 channels */
3629 ht_conf->is_ht = conf_is_ht(conf);
3630 if (ht_conf->is_ht) {
3631 if (conf_is_ht40_minus(conf)) {
3632 ht_conf->extension_chan_offset =
3633 IEEE80211_HT_PARAM_CHA_SEC_BELOW;
3634 ht_conf->is_40mhz = true;
3635 } else if (conf_is_ht40_plus(conf)) {
3636 ht_conf->extension_chan_offset =
3637 IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
3638 ht_conf->is_40mhz = true;
3640 ht_conf->extension_chan_offset =
3641 IEEE80211_HT_PARAM_CHA_SEC_NONE;
3642 ht_conf->is_40mhz = false;
3645 ht_conf->is_40mhz = false;
3647 /* if we are switching from ht to 2.4 clear flags
3648 * from any ht related info since 2.4 does not
3650 if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
3651 priv->staging_rxon.flags = 0;
3653 iwl_set_rxon_channel(priv, conf->channel);
3654 iwl_set_rxon_ht(priv, ht_conf);
3655 iwl_set_flags_for_band(priv, conf->channel->band,
3657 spin_unlock_irqrestore(&priv->lock, flags);
3661 * at this point, staging_rxon has the
3662 * configuration for channel switch
3664 if (priv->cfg->ops->lib->set_channel_switch(priv,
3666 priv->switch_rxon.switch_in_progress = false;
3670 mutex_unlock(&priv->mutex);
3672 if (!priv->switch_rxon.switch_in_progress)
3673 ieee80211_chswitch_done(priv->vif, false);
3674 IWL_DEBUG_MAC80211(priv, "leave\n");
3677 static void iwlagn_configure_filter(struct ieee80211_hw *hw,
3678 unsigned int changed_flags,
3679 unsigned int *total_flags,
3682 struct iwl_priv *priv = hw->priv;
3683 __le32 filter_or = 0, filter_nand = 0;
3685 #define CHK(test, flag) do { \
3686 if (*total_flags & (test)) \
3687 filter_or |= (flag); \
3689 filter_nand |= (flag); \
3692 IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
3693 changed_flags, *total_flags);
3695 CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
3696 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
3697 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
3701 mutex_lock(&priv->mutex);
3703 priv->staging_rxon.filter_flags &= ~filter_nand;
3704 priv->staging_rxon.filter_flags |= filter_or;
3706 iwlcore_commit_rxon(priv);
3708 mutex_unlock(&priv->mutex);
3711 * Receiving all multicast frames is always enabled by the
3712 * default flags setup in iwl_connection_init_rx_config()
3713 * since we currently do not support programming multicast
3714 * filters into the device.
3716 *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
3717 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
3720 static void iwl_mac_flush(struct ieee80211_hw *hw, bool drop)
3722 struct iwl_priv *priv = hw->priv;
3724 mutex_lock(&priv->mutex);
3725 IWL_DEBUG_MAC80211(priv, "enter\n");
3727 /* do not support "flush" */
3728 if (!priv->cfg->ops->lib->txfifo_flush)
3731 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
3732 IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n");
3735 if (iwl_is_rfkill(priv)) {
3736 IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n");
3741 * mac80211 will not push any more frames for transmit
3742 * until the flush is completed
3745 IWL_DEBUG_MAC80211(priv, "send flush command\n");
3746 if (priv->cfg->ops->lib->txfifo_flush(priv, IWL_DROP_ALL)) {
3747 IWL_ERR(priv, "flush request fail\n");
3751 IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
3752 iwlagn_wait_tx_queue_empty(priv);
3754 mutex_unlock(&priv->mutex);
3755 IWL_DEBUG_MAC80211(priv, "leave\n");
3758 /*****************************************************************************
3760 * driver setup and teardown
3762 *****************************************************************************/
3764 static void iwl_setup_deferred_work(struct iwl_priv *priv)
3766 priv->workqueue = create_singlethread_workqueue(DRV_NAME);
3768 init_waitqueue_head(&priv->wait_command_queue);
3770 INIT_WORK(&priv->restart, iwl_bg_restart);
3771 INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
3772 INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
3773 INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
3774 INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
3775 INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
3776 INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
3778 iwl_setup_scan_deferred_work(priv);
3780 if (priv->cfg->ops->lib->setup_deferred_work)
3781 priv->cfg->ops->lib->setup_deferred_work(priv);
3783 init_timer(&priv->statistics_periodic);
3784 priv->statistics_periodic.data = (unsigned long)priv;
3785 priv->statistics_periodic.function = iwl_bg_statistics_periodic;
3787 init_timer(&priv->ucode_trace);
3788 priv->ucode_trace.data = (unsigned long)priv;
3789 priv->ucode_trace.function = iwl_bg_ucode_trace;
3791 if (priv->cfg->ops->lib->recover_from_tx_stall) {
3792 init_timer(&priv->monitor_recover);
3793 priv->monitor_recover.data = (unsigned long)priv;
3794 priv->monitor_recover.function =
3795 priv->cfg->ops->lib->recover_from_tx_stall;
3798 if (!priv->cfg->use_isr_legacy)
3799 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3800 iwl_irq_tasklet, (unsigned long)priv);
3802 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3803 iwl_irq_tasklet_legacy, (unsigned long)priv);
3806 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
3808 if (priv->cfg->ops->lib->cancel_deferred_work)
3809 priv->cfg->ops->lib->cancel_deferred_work(priv);
3811 cancel_delayed_work_sync(&priv->init_alive_start);
3812 cancel_delayed_work(&priv->scan_check);
3813 cancel_work_sync(&priv->start_internal_scan);
3814 cancel_delayed_work(&priv->alive_start);
3815 cancel_work_sync(&priv->run_time_calib_work);
3816 cancel_work_sync(&priv->beacon_update);
3817 del_timer_sync(&priv->statistics_periodic);
3818 del_timer_sync(&priv->ucode_trace);
3819 if (priv->cfg->ops->lib->recover_from_tx_stall)
3820 del_timer_sync(&priv->monitor_recover);
3823 static void iwl_init_hw_rates(struct iwl_priv *priv,
3824 struct ieee80211_rate *rates)
3828 for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
3829 rates[i].bitrate = iwl_rates[i].ieee * 5;
3830 rates[i].hw_value = i; /* Rate scaling will work on indexes */
3831 rates[i].hw_value_short = i;
3833 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
3835 * If CCK != 1M then set short preamble rate flag.
3838 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
3839 0 : IEEE80211_RATE_SHORT_PREAMBLE;
3844 static int iwl_init_drv(struct iwl_priv *priv)
3848 priv->ibss_beacon = NULL;
3850 spin_lock_init(&priv->sta_lock);
3851 spin_lock_init(&priv->hcmd_lock);
3853 INIT_LIST_HEAD(&priv->free_frames);
3855 mutex_init(&priv->mutex);
3856 mutex_init(&priv->sync_cmd_mutex);
3858 priv->ieee_channels = NULL;
3859 priv->ieee_rates = NULL;
3860 priv->band = IEEE80211_BAND_2GHZ;
3862 priv->iw_mode = NL80211_IFTYPE_STATION;
3863 priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
3864 priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
3865 priv->_agn.agg_tids_count = 0;
3867 /* initialize force reset */
3868 priv->force_reset[IWL_RF_RESET].reset_duration =
3869 IWL_DELAY_NEXT_FORCE_RF_RESET;
3870 priv->force_reset[IWL_FW_RESET].reset_duration =
3871 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
3873 /* Choose which receivers/antennas to use */
3874 if (priv->cfg->ops->hcmd->set_rxon_chain)
3875 priv->cfg->ops->hcmd->set_rxon_chain(priv);
3877 iwl_init_scan_params(priv);
3879 /* Set the tx_power_user_lmt to the lowest power level
3880 * this value will get overwritten by channel max power avg
3882 priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN;
3884 ret = iwl_init_channel_map(priv);
3886 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
3890 ret = iwlcore_init_geos(priv);
3892 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
3893 goto err_free_channel_map;
3895 iwl_init_hw_rates(priv, priv->ieee_rates);
3899 err_free_channel_map:
3900 iwl_free_channel_map(priv);
3905 static void iwl_uninit_drv(struct iwl_priv *priv)
3907 iwl_calib_free_results(priv);
3908 iwlcore_free_geos(priv);
3909 iwl_free_channel_map(priv);
3910 kfree(priv->scan_cmd);
3913 static struct ieee80211_ops iwl_hw_ops = {
3915 .start = iwl_mac_start,
3916 .stop = iwl_mac_stop,
3917 .add_interface = iwl_mac_add_interface,
3918 .remove_interface = iwl_mac_remove_interface,
3919 .config = iwl_mac_config,
3920 .configure_filter = iwlagn_configure_filter,
3921 .set_key = iwl_mac_set_key,
3922 .update_tkip_key = iwl_mac_update_tkip_key,
3923 .conf_tx = iwl_mac_conf_tx,
3924 .reset_tsf = iwl_mac_reset_tsf,
3925 .bss_info_changed = iwl_bss_info_changed,
3926 .ampdu_action = iwl_mac_ampdu_action,
3927 .hw_scan = iwl_mac_hw_scan,
3928 .sta_notify = iwl_mac_sta_notify,
3929 .sta_add = iwlagn_mac_sta_add,
3930 .sta_remove = iwl_mac_sta_remove,
3931 .channel_switch = iwl_mac_channel_switch,
3932 .flush = iwl_mac_flush,
3935 static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3938 struct iwl_priv *priv;
3939 struct ieee80211_hw *hw;
3940 struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
3941 unsigned long flags;
3942 u16 pci_cmd, num_mac;
3944 /************************
3945 * 1. Allocating HW data
3946 ************************/
3948 /* Disabling hardware scan means that mac80211 will perform scans
3949 * "the hard way", rather than using device's scan. */
3950 if (cfg->mod_params->disable_hw_scan) {
3951 if (iwl_debug_level & IWL_DL_INFO)
3952 dev_printk(KERN_DEBUG, &(pdev->dev),
3953 "Disabling hw_scan\n");
3954 iwl_hw_ops.hw_scan = NULL;
3957 hw = iwl_alloc_all(cfg, &iwl_hw_ops);
3963 /* At this point both hw and priv are allocated. */
3965 SET_IEEE80211_DEV(hw, &pdev->dev);
3967 IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
3969 priv->pci_dev = pdev;
3970 priv->inta_mask = CSR_INI_SET_MASK;
3972 if (iwl_alloc_traffic_mem(priv))
3973 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
3975 /**************************
3976 * 2. Initializing PCI bus
3977 **************************/
3978 if (pci_enable_device(pdev)) {
3980 goto out_ieee80211_free_hw;
3983 pci_set_master(pdev);
3985 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
3987 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
3989 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3991 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3992 /* both attempts failed: */
3994 IWL_WARN(priv, "No suitable DMA available.\n");
3995 goto out_pci_disable_device;
3999 err = pci_request_regions(pdev, DRV_NAME);
4001 goto out_pci_disable_device;
4003 pci_set_drvdata(pdev, priv);
4006 /***********************
4007 * 3. Read REV register
4008 ***********************/
4009 priv->hw_base = pci_iomap(pdev, 0, 0);
4010 if (!priv->hw_base) {
4012 goto out_pci_release_regions;
4015 IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
4016 (unsigned long long) pci_resource_len(pdev, 0));
4017 IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
4019 /* these spin locks will be used in apm_ops.init and EEPROM access
4020 * we should init now
4022 spin_lock_init(&priv->reg_lock);
4023 spin_lock_init(&priv->lock);
4026 * stop and reset the on-board processor just in case it is in a
4027 * strange state ... like being left stranded by a primary kernel
4028 * and this is now the kdump kernel trying to start up
4030 iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
4032 iwl_hw_detect(priv);
4033 IWL_INFO(priv, "Detected %s, REV=0x%X\n",
4034 priv->cfg->name, priv->hw_rev);
4036 /* We disable the RETRY_TIMEOUT register (0x41) to keep
4037 * PCI Tx retries from interfering with C3 CPU state */
4038 pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
4040 iwl_prepare_card_hw(priv);
4041 if (!priv->hw_ready) {
4042 IWL_WARN(priv, "Failed, HW not ready\n");
4049 /* Read the EEPROM */
4050 err = iwl_eeprom_init(priv);
4052 IWL_ERR(priv, "Unable to init EEPROM\n");
4055 err = iwl_eeprom_check_version(priv);
4057 goto out_free_eeprom;
4059 /* extract MAC Address */
4060 iwl_eeprom_get_mac(priv, priv->addresses[0].addr);
4061 IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
4062 priv->hw->wiphy->addresses = priv->addresses;
4063 priv->hw->wiphy->n_addresses = 1;
4064 num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS);
4066 memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
4068 priv->addresses[1].addr[5]++;
4069 priv->hw->wiphy->n_addresses++;
4072 /************************
4073 * 5. Setup HW constants
4074 ************************/
4075 if (iwl_set_hw_params(priv)) {
4076 IWL_ERR(priv, "failed to set hw parameters\n");
4077 goto out_free_eeprom;
4080 /*******************
4082 *******************/
4084 err = iwl_init_drv(priv);
4086 goto out_free_eeprom;
4087 /* At this point both hw and priv are initialized. */
4089 /********************
4091 ********************/
4092 spin_lock_irqsave(&priv->lock, flags);
4093 iwl_disable_interrupts(priv);
4094 spin_unlock_irqrestore(&priv->lock, flags);
4096 pci_enable_msi(priv->pci_dev);
4098 iwl_alloc_isr_ict(priv);
4099 err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
4100 IRQF_SHARED, DRV_NAME, priv);
4102 IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
4103 goto out_disable_msi;
4106 iwl_setup_deferred_work(priv);
4107 iwl_setup_rx_handlers(priv);
4109 /*********************************************
4110 * 8. Enable interrupts and read RFKILL state
4111 *********************************************/
4113 /* enable rfkill interrupt: hw bug w/a */
4114 pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
4115 if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
4116 pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
4117 pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
4120 iwl_enable_rfkill_int(priv);
4122 /* If platform's RF_KILL switch is NOT set to KILL */
4123 if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
4124 clear_bit(STATUS_RF_KILL_HW, &priv->status);
4126 set_bit(STATUS_RF_KILL_HW, &priv->status);
4128 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
4129 test_bit(STATUS_RF_KILL_HW, &priv->status));
4131 iwl_power_initialize(priv);
4132 iwl_tt_initialize(priv);
4134 init_completion(&priv->_agn.firmware_loading_complete);
4136 err = iwl_request_firmware(priv, true);
4138 goto out_destroy_workqueue;
4142 out_destroy_workqueue:
4143 destroy_workqueue(priv->workqueue);
4144 priv->workqueue = NULL;
4145 free_irq(priv->pci_dev->irq, priv);
4146 iwl_free_isr_ict(priv);
4148 pci_disable_msi(priv->pci_dev);
4149 iwl_uninit_drv(priv);
4151 iwl_eeprom_free(priv);
4153 pci_iounmap(pdev, priv->hw_base);
4154 out_pci_release_regions:
4155 pci_set_drvdata(pdev, NULL);
4156 pci_release_regions(pdev);
4157 out_pci_disable_device:
4158 pci_disable_device(pdev);
4159 out_ieee80211_free_hw:
4160 iwl_free_traffic_mem(priv);
4161 ieee80211_free_hw(priv->hw);
4166 static void __devexit iwl_pci_remove(struct pci_dev *pdev)
4168 struct iwl_priv *priv = pci_get_drvdata(pdev);
4169 unsigned long flags;
4174 wait_for_completion(&priv->_agn.firmware_loading_complete);
4176 IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
4178 iwl_dbgfs_unregister(priv);
4179 sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
4181 /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
4182 * to be called and iwl_down since we are removing the device
4183 * we need to set STATUS_EXIT_PENDING bit.
4185 set_bit(STATUS_EXIT_PENDING, &priv->status);
4186 if (priv->mac80211_registered) {
4187 ieee80211_unregister_hw(priv->hw);
4188 priv->mac80211_registered = 0;
4194 * Make sure device is reset to low power before unloading driver.
4195 * This may be redundant with iwl_down(), but there are paths to
4196 * run iwl_down() without calling apm_ops.stop(), and there are
4197 * paths to avoid running iwl_down() at all before leaving driver.
4198 * This (inexpensive) call *makes sure* device is reset.
4200 priv->cfg->ops->lib->apm_ops.stop(priv);
4204 /* make sure we flush any pending irq or
4205 * tasklet for the driver
4207 spin_lock_irqsave(&priv->lock, flags);
4208 iwl_disable_interrupts(priv);
4209 spin_unlock_irqrestore(&priv->lock, flags);
4211 iwl_synchronize_irq(priv);
4213 iwl_dealloc_ucode_pci(priv);
4216 iwlagn_rx_queue_free(priv, &priv->rxq);
4217 iwlagn_hw_txq_ctx_free(priv);
4219 iwl_eeprom_free(priv);
4222 /*netif_stop_queue(dev); */
4223 flush_workqueue(priv->workqueue);
4225 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
4226 * priv->workqueue... so we can't take down the workqueue
4228 destroy_workqueue(priv->workqueue);
4229 priv->workqueue = NULL;
4230 iwl_free_traffic_mem(priv);
4232 free_irq(priv->pci_dev->irq, priv);
4233 pci_disable_msi(priv->pci_dev);
4234 pci_iounmap(pdev, priv->hw_base);
4235 pci_release_regions(pdev);
4236 pci_disable_device(pdev);
4237 pci_set_drvdata(pdev, NULL);
4239 iwl_uninit_drv(priv);
4241 iwl_free_isr_ict(priv);
4243 if (priv->ibss_beacon)
4244 dev_kfree_skb(priv->ibss_beacon);
4246 ieee80211_free_hw(priv->hw);
4250 /*****************************************************************************
4252 * driver and module entry point
4254 *****************************************************************************/
4256 /* Hardware specific file defines the PCI IDs table for that hardware module */
4257 static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
4258 #ifdef CONFIG_IWL4965
4259 {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
4260 {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
4261 #endif /* CONFIG_IWL4965 */
4262 #ifdef CONFIG_IWL5000
4263 /* 5100 Series WiFi */
4264 {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
4265 {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
4266 {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
4267 {IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */
4268 {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */
4269 {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */
4270 {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */
4271 {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */
4272 {IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */
4273 {IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */
4274 {IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */
4275 {IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */
4276 {IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */
4277 {IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */
4278 {IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */
4279 {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */
4280 {IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */
4281 {IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */
4282 {IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */
4283 {IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */
4284 {IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */
4285 {IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */
4286 {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */
4287 {IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */
4289 /* 5300 Series WiFi */
4290 {IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */
4291 {IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */
4292 {IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */
4293 {IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */
4294 {IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */
4295 {IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */
4296 {IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */
4297 {IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */
4298 {IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */
4299 {IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */
4300 {IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */
4301 {IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */
4303 /* 5350 Series WiFi/WiMax */
4304 {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */
4305 {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */
4306 {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */
4308 /* 5150 Series Wifi/WiMax */
4309 {IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */
4310 {IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */
4311 {IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */
4312 {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
4313 {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
4314 {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
4316 {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
4317 {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
4318 {IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */
4319 {IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */
4322 {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
4323 {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
4324 {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
4325 {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
4326 {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
4327 {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
4328 {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
4329 {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
4330 {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
4331 {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
4333 /* 6x00 Series Gen2a */
4334 {IWL_PCI_DEVICE(0x0082, 0x1201, iwl6000g2a_2agn_cfg)},
4335 {IWL_PCI_DEVICE(0x0085, 0x1211, iwl6000g2a_2agn_cfg)},
4336 {IWL_PCI_DEVICE(0x0082, 0x1221, iwl6000g2a_2agn_cfg)},
4337 {IWL_PCI_DEVICE(0x0082, 0x1206, iwl6000g2a_2abg_cfg)},
4338 {IWL_PCI_DEVICE(0x0085, 0x1216, iwl6000g2a_2abg_cfg)},
4339 {IWL_PCI_DEVICE(0x0082, 0x1226, iwl6000g2a_2abg_cfg)},
4340 {IWL_PCI_DEVICE(0x0082, 0x1207, iwl6000g2a_2bg_cfg)},
4341 {IWL_PCI_DEVICE(0x0082, 0x1301, iwl6000g2a_2agn_cfg)},
4342 {IWL_PCI_DEVICE(0x0082, 0x1306, iwl6000g2a_2abg_cfg)},
4343 {IWL_PCI_DEVICE(0x0082, 0x1307, iwl6000g2a_2bg_cfg)},
4344 {IWL_PCI_DEVICE(0x0082, 0x1321, iwl6000g2a_2agn_cfg)},
4345 {IWL_PCI_DEVICE(0x0082, 0x1326, iwl6000g2a_2abg_cfg)},
4346 {IWL_PCI_DEVICE(0x0085, 0x1311, iwl6000g2a_2agn_cfg)},
4347 {IWL_PCI_DEVICE(0x0085, 0x1316, iwl6000g2a_2abg_cfg)},
4349 /* 6x00 Series Gen2b */
4350 {IWL_PCI_DEVICE(0x008F, 0x5105, iwl6000g2b_bgn_cfg)},
4351 {IWL_PCI_DEVICE(0x0090, 0x5115, iwl6000g2b_bgn_cfg)},
4352 {IWL_PCI_DEVICE(0x008F, 0x5125, iwl6000g2b_bgn_cfg)},
4353 {IWL_PCI_DEVICE(0x008F, 0x5107, iwl6000g2b_bg_cfg)},
4354 {IWL_PCI_DEVICE(0x008F, 0x5201, iwl6000g2b_2agn_cfg)},
4355 {IWL_PCI_DEVICE(0x0090, 0x5211, iwl6000g2b_2agn_cfg)},
4356 {IWL_PCI_DEVICE(0x008F, 0x5221, iwl6000g2b_2agn_cfg)},
4357 {IWL_PCI_DEVICE(0x008F, 0x5206, iwl6000g2b_2abg_cfg)},
4358 {IWL_PCI_DEVICE(0x0090, 0x5216, iwl6000g2b_2abg_cfg)},
4359 {IWL_PCI_DEVICE(0x008F, 0x5226, iwl6000g2b_2abg_cfg)},
4360 {IWL_PCI_DEVICE(0x008F, 0x5207, iwl6000g2b_2bg_cfg)},
4361 {IWL_PCI_DEVICE(0x008A, 0x5301, iwl6000g2b_bgn_cfg)},
4362 {IWL_PCI_DEVICE(0x008A, 0x5305, iwl6000g2b_bgn_cfg)},
4363 {IWL_PCI_DEVICE(0x008A, 0x5307, iwl6000g2b_bg_cfg)},
4364 {IWL_PCI_DEVICE(0x008A, 0x5321, iwl6000g2b_bgn_cfg)},
4365 {IWL_PCI_DEVICE(0x008A, 0x5325, iwl6000g2b_bgn_cfg)},
4366 {IWL_PCI_DEVICE(0x008B, 0x5311, iwl6000g2b_bgn_cfg)},
4367 {IWL_PCI_DEVICE(0x008B, 0x5315, iwl6000g2b_bgn_cfg)},
4368 {IWL_PCI_DEVICE(0x0090, 0x5211, iwl6000g2b_2agn_cfg)},
4369 {IWL_PCI_DEVICE(0x0090, 0x5215, iwl6000g2b_2bgn_cfg)},
4370 {IWL_PCI_DEVICE(0x0090, 0x5216, iwl6000g2b_2abg_cfg)},
4371 {IWL_PCI_DEVICE(0x0091, 0x5201, iwl6000g2b_2agn_cfg)},
4372 {IWL_PCI_DEVICE(0x0091, 0x5205, iwl6000g2b_2bgn_cfg)},
4373 {IWL_PCI_DEVICE(0x0091, 0x5206, iwl6000g2b_2abg_cfg)},
4374 {IWL_PCI_DEVICE(0x0091, 0x5207, iwl6000g2b_2bg_cfg)},
4375 {IWL_PCI_DEVICE(0x0091, 0x5221, iwl6000g2b_2agn_cfg)},
4376 {IWL_PCI_DEVICE(0x0091, 0x5225, iwl6000g2b_2bgn_cfg)},
4377 {IWL_PCI_DEVICE(0x0091, 0x5226, iwl6000g2b_2abg_cfg)},
4379 /* 6x50 WiFi/WiMax Series */
4380 {IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
4381 {IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
4382 {IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
4383 {IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
4384 {IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
4385 {IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
4387 /* 6x50 WiFi/WiMax Series Gen2 */
4388 {IWL_PCI_DEVICE(0x0885, 0x1305, iwl6050g2_bgn_cfg)},
4389 {IWL_PCI_DEVICE(0x0885, 0x1306, iwl6050g2_bgn_cfg)},
4390 {IWL_PCI_DEVICE(0x0885, 0x1325, iwl6050g2_bgn_cfg)},
4391 {IWL_PCI_DEVICE(0x0885, 0x1326, iwl6050g2_bgn_cfg)},
4392 {IWL_PCI_DEVICE(0x0886, 0x1315, iwl6050g2_bgn_cfg)},
4393 {IWL_PCI_DEVICE(0x0886, 0x1316, iwl6050g2_bgn_cfg)},
4395 /* 1000 Series WiFi */
4396 {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
4397 {IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
4398 {IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
4399 {IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
4400 {IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
4401 {IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
4402 {IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
4403 {IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
4404 {IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
4405 {IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
4406 {IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
4407 {IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
4408 #endif /* CONFIG_IWL5000 */
4412 MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
4414 static struct pci_driver iwl_driver = {
4416 .id_table = iwl_hw_card_ids,
4417 .probe = iwl_pci_probe,
4418 .remove = __devexit_p(iwl_pci_remove),
4420 .suspend = iwl_pci_suspend,
4421 .resume = iwl_pci_resume,
4425 static int __init iwl_init(void)
4429 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
4430 pr_info(DRV_COPYRIGHT "\n");
4432 ret = iwlagn_rate_control_register();
4434 pr_err("Unable to register rate control algorithm: %d\n", ret);
4438 ret = pci_register_driver(&iwl_driver);
4440 pr_err("Unable to initialize PCI module\n");
4441 goto error_register;
4447 iwlagn_rate_control_unregister();
4451 static void __exit iwl_exit(void)
4453 pci_unregister_driver(&iwl_driver);
4454 iwlagn_rate_control_unregister();
4457 module_exit(iwl_exit);
4458 module_init(iwl_init);
4460 #ifdef CONFIG_IWLWIFI_DEBUG
4461 module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
4462 MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
4463 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
4464 MODULE_PARM_DESC(debug, "debug output mask");
4467 module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
4468 MODULE_PARM_DESC(swcrypto50,
4469 "using crypto in software (default 0 [hardware]) (deprecated)");
4470 module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
4471 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
4472 module_param_named(queues_num50,
4473 iwlagn_mod_params.num_of_queues, int, S_IRUGO);
4474 MODULE_PARM_DESC(queues_num50,
4475 "number of hw queues in 50xx series (deprecated)");
4476 module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
4477 MODULE_PARM_DESC(queues_num, "number of hw queues.");
4478 module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
4479 MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)");
4480 module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
4481 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
4482 module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
4484 MODULE_PARM_DESC(amsdu_size_8K50,
4485 "enable 8K amsdu size in 50XX series (deprecated)");
4486 module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
4488 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
4489 module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
4490 MODULE_PARM_DESC(fw_restart50,
4491 "restart firmware in case of error (deprecated)");
4492 module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
4493 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
4495 disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO);
4496 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
4498 module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int,
4500 MODULE_PARM_DESC(ucode_alternative,
4501 "specify ucode alternative to use from ucode file");