2 * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
4 * Copyright (C) 2011 Samsung Electronics
5 * MyungJoo Ham <myungjoo.ham@samsung.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 #include <linux/gpio.h>
24 #include <linux/interrupt.h>
25 #include <linux/module.h>
26 #include <linux/slab.h>
27 #include <linux/power_supply.h>
28 #include <linux/platform_device.h>
29 #include <linux/power/max8903_charger.h>
32 struct max8903_pdata pdata;
34 struct power_supply psy;
40 static enum power_supply_property max8903_charger_props[] = {
41 POWER_SUPPLY_PROP_STATUS, /* Charger status output */
42 POWER_SUPPLY_PROP_ONLINE, /* External power source */
43 POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
46 static int max8903_get_property(struct power_supply *psy,
47 enum power_supply_property psp,
48 union power_supply_propval *val)
50 struct max8903_data *data = container_of(psy,
51 struct max8903_data, psy);
54 case POWER_SUPPLY_PROP_STATUS:
55 val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
56 if (data->pdata.chg) {
57 if (gpio_get_value(data->pdata.chg) == 0)
58 val->intval = POWER_SUPPLY_STATUS_CHARGING;
59 else if (data->usb_in || data->ta_in)
60 val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
62 val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
65 case POWER_SUPPLY_PROP_ONLINE:
67 if (data->usb_in || data->ta_in)
70 case POWER_SUPPLY_PROP_HEALTH:
71 val->intval = POWER_SUPPLY_HEALTH_GOOD;
73 val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
81 static irqreturn_t max8903_dcin(int irq, void *_data)
83 struct max8903_data *data = _data;
84 struct max8903_pdata *pdata = &data->pdata;
86 enum power_supply_type old_type;
88 ta_in = gpio_get_value(pdata->dok) ? false : true;
90 if (ta_in == data->ta_in)
95 /* Set Current-Limit-Mode 1:DC 0:USB */
97 gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
99 /* Charger Enable / Disable (cen is negated) */
101 gpio_set_value(pdata->cen, ta_in ? 0 :
102 (data->usb_in ? 0 : 1));
104 dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
105 "Connected" : "Disconnected");
107 old_type = data->psy.type;
110 data->psy.type = POWER_SUPPLY_TYPE_MAINS;
111 else if (data->usb_in)
112 data->psy.type = POWER_SUPPLY_TYPE_USB;
114 data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
116 if (old_type != data->psy.type)
117 power_supply_changed(&data->psy);
122 static irqreturn_t max8903_usbin(int irq, void *_data)
124 struct max8903_data *data = _data;
125 struct max8903_pdata *pdata = &data->pdata;
127 enum power_supply_type old_type;
129 usb_in = gpio_get_value(pdata->uok) ? false : true;
131 if (usb_in == data->usb_in)
134 data->usb_in = usb_in;
136 /* Do not touch Current-Limit-Mode */
138 /* Charger Enable / Disable (cen is negated) */
140 gpio_set_value(pdata->cen, usb_in ? 0 :
141 (data->ta_in ? 0 : 1));
143 dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
144 "Connected" : "Disconnected");
146 old_type = data->psy.type;
149 data->psy.type = POWER_SUPPLY_TYPE_MAINS;
150 else if (data->usb_in)
151 data->psy.type = POWER_SUPPLY_TYPE_USB;
153 data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
155 if (old_type != data->psy.type)
156 power_supply_changed(&data->psy);
161 static irqreturn_t max8903_fault(int irq, void *_data)
163 struct max8903_data *data = _data;
164 struct max8903_pdata *pdata = &data->pdata;
167 fault = gpio_get_value(pdata->flt) ? false : true;
169 if (fault == data->fault)
175 dev_err(data->dev, "Charger suffers a fault and stops.\n");
177 dev_err(data->dev, "Charger recovered from a fault.\n");
182 static __devinit int max8903_probe(struct platform_device *pdev)
184 struct max8903_data *data;
185 struct device *dev = &pdev->dev;
186 struct max8903_pdata *pdata = pdev->dev.platform_data;
192 data = kzalloc(sizeof(struct max8903_data), GFP_KERNEL);
194 dev_err(dev, "Cannot allocate memory.\n");
197 memcpy(&data->pdata, pdata, sizeof(struct max8903_pdata));
199 platform_set_drvdata(pdev, data);
201 if (pdata->dc_valid == false && pdata->usb_valid == false) {
202 dev_err(dev, "No valid power sources.\n");
207 if (pdata->dc_valid) {
208 if (pdata->dok && gpio_is_valid(pdata->dok) &&
209 pdata->dcm && gpio_is_valid(pdata->dcm)) {
210 gpio = pdata->dok; /* PULL_UPed Interrupt */
211 ta_in = gpio_get_value(gpio) ? 0 : 1;
213 gpio = pdata->dcm; /* Output */
214 gpio_set_value(gpio, ta_in);
216 dev_err(dev, "When DC is wired, DOK and DCM should"
217 " be wired as well.\n");
223 if (gpio_is_valid(pdata->dcm))
224 gpio_set_value(pdata->dcm, 0);
226 dev_err(dev, "Invalid pin: dcm.\n");
233 if (pdata->usb_valid) {
234 if (pdata->uok && gpio_is_valid(pdata->uok)) {
236 usb_in = gpio_get_value(gpio) ? 0 : 1;
238 dev_err(dev, "When USB is wired, UOK should be wired."
246 if (gpio_is_valid(pdata->cen)) {
247 gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
249 dev_err(dev, "Invalid pin: cen.\n");
256 if (!gpio_is_valid(pdata->chg)) {
257 dev_err(dev, "Invalid pin: chg.\n");
264 if (!gpio_is_valid(pdata->flt)) {
265 dev_err(dev, "Invalid pin: flt.\n");
272 if (!gpio_is_valid(pdata->usus)) {
273 dev_err(dev, "Invalid pin: usus.\n");
281 data->usb_in = usb_in;
283 data->psy.name = "max8903_charger";
284 data->psy.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS :
285 ((usb_in) ? POWER_SUPPLY_TYPE_USB :
286 POWER_SUPPLY_TYPE_BATTERY);
287 data->psy.get_property = max8903_get_property;
288 data->psy.properties = max8903_charger_props;
289 data->psy.num_properties = ARRAY_SIZE(max8903_charger_props);
291 ret = power_supply_register(dev, &data->psy);
293 dev_err(dev, "failed: power supply register.\n");
297 if (pdata->dc_valid) {
298 ret = request_threaded_irq(gpio_to_irq(pdata->dok),
300 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
301 "MAX8903 DC IN", data);
303 dev_err(dev, "Cannot request irq %d for DC (%d)\n",
304 gpio_to_irq(pdata->dok), ret);
309 if (pdata->usb_valid) {
310 ret = request_threaded_irq(gpio_to_irq(pdata->uok),
312 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
313 "MAX8903 USB IN", data);
315 dev_err(dev, "Cannot request irq %d for USB (%d)\n",
316 gpio_to_irq(pdata->uok), ret);
322 ret = request_threaded_irq(gpio_to_irq(pdata->flt),
324 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
325 "MAX8903 Fault", data);
327 dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
328 gpio_to_irq(pdata->flt), ret);
336 if (pdata->usb_valid)
337 free_irq(gpio_to_irq(pdata->uok), data);
340 free_irq(gpio_to_irq(pdata->dok), data);
342 power_supply_unregister(&data->psy);
348 static __devexit int max8903_remove(struct platform_device *pdev)
350 struct max8903_data *data = platform_get_drvdata(pdev);
353 struct max8903_pdata *pdata = &data->pdata;
356 free_irq(gpio_to_irq(pdata->flt), data);
357 if (pdata->usb_valid)
358 free_irq(gpio_to_irq(pdata->uok), data);
360 free_irq(gpio_to_irq(pdata->dok), data);
361 power_supply_unregister(&data->psy);
368 static struct platform_driver max8903_driver = {
369 .probe = max8903_probe,
370 .remove = __devexit_p(max8903_remove),
372 .name = "max8903-charger",
373 .owner = THIS_MODULE,
377 module_platform_driver(max8903_driver);
379 MODULE_LICENSE("GPL");
380 MODULE_DESCRIPTION("MAX8903 Charger Driver");
381 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
382 MODULE_ALIAS("platform:max8903-charger");